Document mmvo4RXqL6m7beQj4389qjYKQ

1f I; ^^Balkamp 170-HOSE GARAGE EXHAUST iiiiniiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiitiiimiiimiiiiiiimiiiiiiimiiiiiiiitiiiiiiiiiiiiiiiiiitiiiiiiiitiiiiiiiiiiiii Material compound from highest quality synthetic rubber and has outstanding resistance to tear, heat, oil and ozone. Has greater flexibility which reduces collapsing and insures longer hose life. Fits all standard hoses and adapters. Not used on large trucks or for dynamometer test. Not used on Diesels. No. 3-7180 2 in. dia. -- 10 ft. long SNAP-LOCK COUPLER* * Each 10 ft. length has Male Snap-Lock Coupler on one end and Female Coupler on opposite end - Couples easily by hand. TAIL PIPE TEMP. UNDER 300 F. No. 3-7181 2-1/2 in. dia. -- 10 ft. long No. 3-7199 2-1/2 in. dia. -- 3 in. long TAIL PIPE TEMP. UNDER 350w F. No. 3-7182 3 in. dia. -- 10 ft. long ,o TAIL PIPE TEMP. UNDER 475 F DOOR PORT ADAPTERS 3-7189 Cast Aluminum for doors thicker than 1/2 inch. 3-7190 Cast Aluminum for door up to 1/2 inch thickness. TAIL PIPE EXHAUST HOSE ADAPTERS (For Use with Non-Crush Rubber Hose) "Y" COUPLINGS Adapters screw directly into 2" hose. With 2-1/2" hose, use hose coupler lock sleeve No. 3-7183, which remains in hose for quick interchange of all adapters. For use with 3" hose screw short length of 2-1/2" hose. Part No. 3-7199, into 3" section and use as suggested for 2-1/2" hose. T.---**>--* ust'-ir-VWSSrT?! 3-7187 3-7188 2 in............................................ 3-7184 2-1/2 in....................................3-7185 3 in............................................ 3-7186 "Y" Couplings permit the servicing of dual systems froma single outlet stall. HOSE COUPLER (LOCK SLEEVE) Fits on outside of all Tailpipes 2-1/2" to 2" dia. Fits inside of Tailpipes from 1-1/2" to 2" dia. Use when obstructions prevent use of 3-7187. 3-7198 Fits on outside of ALL Underbody Tailpipes from 2" up to 2-1/4". Il^t 3-7183 Use with 2-1/2 in. or 3 in. hose for quickest and easiest interchange of adapters. Screws into 2-1/2 in. hose. For use with 3 in. hose, screw short length of 2-1/2 in. hose (No. 3-7199) into 3 in. section and screw lock sleeve into 2-1/2 in. piece. Replacement Parts 56 r L