Document mBB3Zae8x3nOO4w98qKwnkkp4
i TennecoPol' iers
A T#nnco Company
MATERIAL SAFETY OATA
NUMBER
1S6
(Approved by U.S. Dapartmant of Labor as " ssantialty similar" to FORM OSHA-20)
SECTION I IDENTIFICATION OF PRODUCT
MANU^ACtURC^ I flAidf
Emergency telephone NO.
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
609-386-9200 713-479-3411
ADORESS
RIVER R0A0, P.o. BOX 129, PLEMINGTON, NEW JERSEY 08822_________________ TAAOf NAME and SYNONYMS TENNECO PVC RESIN
175, 185, 190, 195, 200, 225, 225F, 22SPG, 225SG, 250, 250-3, 10R, 501. 530. 540
CHEMICAL NAME AND SYNONYMS
POLY(VINYL CHLORIDE), PVC HOMOPOLYMER
CHEMICAL FAMILY
CHL0R0HYDR0CARBQN POLYMER
MOLECULAR FORMULA
(CH?CHC1)n
MOL WT
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
THRESHOLD % UMIT
VALUE
COMPONENT
THRESHOLD
S UMIT
VAUIC
0SHA Standard 1910.93q(. 1017) on vinyl^clitoride sets a permissible exposure 1im1t<uo?1
Ippm averaged over any 8 hr. period and 5ppm over any 15 min. period. On the basis that jolyvinyl chloride may contain and release small amounts of monomer, the Standard applies to the manufacture, reaction, packaging, repackaging, storage, handling, use or transportation of PVC, but not to handling or use of "fabricated products", as defined,
if not subject to processing sufficient in time or temperature to cause mass melting.
APPEARANCE and ooor
White powder, odorless
BOILING POINT (DEGREES FAHRENHEIT)
Not applicable
VAPOR pressure (MM. OF MERCURY)
Not applicable
VAPOR DESiTY {AIR - 1)
Not applicable
solubility in water
Negligible
SECTION III PHYSICAL DATA
(MoEeLgTrINeGesPFOaINhTrenheit) Not applicable Softens about 160 - 180F
SPECIFIC GRAVITY (WATER m 1)
1.4
PERCENT VOLATILE (BY WEIGHT)
Approx. 1% (Moisture)
EVAPORATION RATE IBUTYLACETATE * II
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
flash point (Specify methodi Ignition about 735*F auto- flammable limits
LOWER
ET6fTMSffout 850 F (ASTM D-1929)
(PERCENT BY VOLUME)
Not applicable
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical.
SBPTEEVCWIAAML FrIRnE*-TFIiGvnHT, iINnGv PrnRMOWCGEMDWURnGEMS
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating ftines.
UPPER
UNUSUAL FIRE ANO EXPLOSION HAZARDS NFPA lists ignition temperatures of 7258F for layer and 1220"F for PVC dust cloud. Produces combustible gases above 57Q*F. Fire conditions produce hydrogen chloride, requiring protective equipment.
TEN0 13-
Thl, Information M fumiahad without warranty, raBraaaniallon. inducamant or lleana* of any kind, axcapt that it >, Accural* lo th# MM Of TnuioCO Pofymar, knowtadga OOt*(n*d from lQMt<d*OaffW*d by T*ntt*COPOtytn*n IQ Q**CCUT** and T*nn*CO Polyman OO** nofaaaum* any 1*0*1 T**pon,Wf>yfOfM** Of >*** HOP* MUIA. Cuatomon *r oncoMtogod to conduct tnair own t**ii Baton u*mg any product nod na laMi.
TOOL MARS
r
Tenneco Polymers
A Tisnneco Company
MATERIAL SAFETY DATA
NUMBER
157
(Approved by U.S. Dopartmont of Labor as "aasantlalty tlmllar" to FORM 0SHA-20)
SECTION I IDENTIFICATION OF PRODUCT
MANUFACTURERS name
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
ADDRESS
RIVER ROAD, P.Q. BOX 129, FLEMINGTON, NEW JERSEY trade name AMO synonyms jENNECO PVC DISPERSION RESIN
08822
EMERGENCY TELEPHONE mo.
609-386-9200
CHEMICAL NAME AND SYNONYMS
POLY(VINYL CHLORIDE) PVC
CHEMICAL FAMILY
CHL0R0HYDR0CARB0N POLYMER
MOLECULAR FORMULA
(CH?CHCl)n
MOL. WT.
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
THRESHOLD % UMIT
VALUE
COMPONENT
THRESHOLD /, UMIT
VALUE
(UNITS)
(UNITS)
OSHA Standard 1910-93q(.1017) on vinyl chloride sets a permissible exposure limit of
Ippm averaged over any 8 hr. period and 5ppm over any 15 minute period. On the basis that polyvinyl chloride may contain and release small amounts of monomer, the Standard applied to tne manufacture, reaction, packaging, repackaging, storage, handling, use or
transportation of PVC, but not to.handling or use of "fabricated products", as defined,
if not subject to processing sufficient in time or temperature to cause mass meitino.
APPEARANCE AND ODOR
White powder, odorless.
SOILING POINT (DEGREES FAHRENHEIT)
Not applicable
VAPOR PRESSURE (MM. OF MERCURY)
Not applicable
vapor oesity
(AIR = 1)
Not applicable
solubiuty in water
Negligible
SECTION III PHYSICAL DATA
MELTING POINT (DEGREES FAHRENHEIT)
Not applicable
Softens about 160 - 180F
SPECIFIC GRAVITY (WATER m 1|
1.4
PERCENT VOLATILE (BY WEIGHT)
Approximately 1% (moisture)
EVAPORATION RATE (Butylacetate = ii
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
plasm point (SPEctFYMETHooi Ignition about 735F (DE_GR_E_E_S FigAHRnENitHiEITo)n about 850F (ASTM 1929)
autc (fPlEaRmCmENaTblBeYlVimOLitUsME!
LOWER
Not applicable.
UPPER
EIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical
EOAL FIRE-FIGHTING PROCEDURES
iter spray or fog may be helpful in reducing flame intensity and absorbing
Yritating funes.
TEN0 113
unusual pire and explosion hazaros nFPA lists ignition temperatures of 752<*F for layer and 1220F
for PVC dust cloud. Produces combustible gases above 570F. Fire conditions produce hydrogen chloride, requiring protective equipment.
This Information IS tumlahsd without warranty, rtprstsntstJon, indvetmoftt or nesn** m
ototsmsd from sourest btfisvsd by Tnn*eo
-
Custom*TM '* ***
TennecoPolv iers
A ftnneco Company
MATERIAL SAFETY DATA
(Approved by U.S, Dapartmant ot Labor as "assaottalty similar" to FORM OSMA-30)
number
158
SECTION I IDENTIFICATION OF PRODUCT
MANUFACTURER'S NAME
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
emergency telephone no
609-386-9200 201-782-4011
ADDRESS
RIVER ROAD, P.0. BOX 129, FIEMINGT0N, NEW JERSEY 08822
TRADE name ANO SYNONYMS
TENNECO PVC COPOLYMER RESIN
305 , 314 , 315 , 318 , 382 , 388 , 389 , 390 , 391 , 400 , 521
CHEMICAL NAME AND SYNONYMS
VINYLCHLORIDE - VINYL ACETATE COPOLYMER, VC/VAc COPOLYMER
CHEMICAL FAMILY
CHL0R0HYDR0CARB0N COPOLYMER
MOLECULAR formula
{CH2CHC1)x(CH2CH0C0CH3)y
MOL VYT
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
threshold
V* UMIT
value
COMPONENT
% THRESHOLO limit VALUE
(UNITS)
(UNITS)
OSHA Standard 1910.93q(.1017) on vinyl chloride sets a permissible exposure limit of
Ippm averaged over any 8 hr. period and 5ppm over any 15 minute period. On the basis
that polyvinyl chloride may contain and release small amounts of monomer, the Standard applies to tne manufacture, reaction, .packaging, reoackagiog. storage, handling, use or transportation of PVC, but not to.handling or use or "faBncatea products'', as defined, if not subject to processing sufficient Iff time or temperature to cause mass melting.
SECTION III
APPEARANCE ANO OOOR
White powder, faint ester odor.
BOIUNG POINT (DEGREES FAHRENHEIT)
Not applicable
vapor pressure
(MM, OF MERCURY)
Not applicable
VAPOR OESTTY (AIR *1)
Not applicable
SOLUBILITY IN WATER
Negligible
PHYSICAL DATA
MELTING POINT (DEGREES FAHRENHEIT)
.. .
Not applicable
Softens about 140 - 160F.
SPECIFIC GRAVITY (WATER 1)
1.35 - 1.4
PERCENT VOLATILE (BY WEIGHT)
Approximately 1% (moisture)
EVAPORATION RATE (BUTYLACETATE m 1)
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
I an i t i on about 735 F(fDlEaGsRhEpEoSiFnAtHisRrEeNcHifEyITm) et,,hod) 1 M1ill L lull dLlUUl / OU r ________________for PVC (ASTM D-1929).
FLAMMABLE UNITS (PERCENT BY VOLUME)
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical.
LOWER
Not applicable
UPPER
SPECIAL FIRE FIGHTING PROCEDURES
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating funes.
UNUSUAL FIRE ANO EXPLOSION HAZARDS NFPA lists ignition temperature of 1274F for dust cloud. Produces combustible gases above 570F. Fire conditions produce hydrogen chloride, requiring protective equipment.___ temh i 14
Thi, infwmanwi I, tumlahad without warranty. mpraianiation, mducamant or HconM of any kino, oxcapt mat n >$ uccurit* to mo tool oI Tonnoco Polymofi knowloooo of oOtolnod from oourooo bollovoO by Tonnoco Pofymofa to bo occurito ond Tonnoco Pofymor, Oooo not aaauma ony loool raaponalbttty IOf uoo of rofionen upon tamo Cuoiomoro oro oncoufOpod to conouct thoif own toot,. Boloro ualnp ony product road It* labol
TennecoPolj lers
A Tenoeco Company
MATERIAL SAFETY DATA
number
159
IApprovao by U S. Dapartmant of Labor as "assantially similar" to FORM OSHA-20)
SECTION I IDENTIFICATION OF PRODUCT
manufacturer* name TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
ADORESS
RIVER ROAD, P.0. BOX 129, FIEMINGTON, NEW JERSEY
08822
EMERGENCY TELEPHONE NO
609-386*9200
TRAOE NAME ANO SYNONYMS
TENNECO PVC COPOLYMER DISPERSION RESIN 0565, 0665 (0565-1)
CHEMICAL NAME ANO SYNONYMS
VINYLCHLORIDE - VINYL ACETATE COPOLYMER, VC/VAc COPOLYMER
CHEMICAL FAMILY
CHLOROHYDROCARBON COPOLYMER
MOLECULAR FORMULA
{CHgCHCI}x(CHgCH0C0CH3)v
MOL WT,
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
THRESHOCO /. UMIT
VALUE
COMPONENT
THRESHOLD % LIMIT
value
(UNITS)
(UNITS)
0SHA Standard 1910.93q(. 1017) on vinyl chloride sets a permissible exposure limit of
Ippm averaged over any 8 hr. period and 5ppm over any 15 minute period. On the basis that polyvinyl chloride may contain and release small amounts of monomer, the Standard
applies to the manufacture, reaction, packaging, repackaging, storage, handling, use or
transportation i f not subject
of to
PVC, but not tQ.handling processing sufficient iff
or use of "fabricated time or temperature to
products", cause jnass
ams eHd` teinfigned,
SECTION III
APPEARANCE ANO OOOR
Mite powder, faint ester odor.
0OIUNG POINT (DEGREES FAHRENHEIT)
Not applicable
VAPOR PRESSURE (MM. OF MERCURY)
Not applicable
VAPOR OESJTY
<a,No applicable
SOLUBILITY IN WATER
Negligible
PHYSICAL DATA
melting point
(degreesFahrenheit)
Not applicable
Softens about 140 - 160F.
SPECIFIC GRAVITY (WATER * 1)
1.4
percent volatile
(BY WEIGHT)
Approximately 135 (Moisture)
evaporation rate
(BUTY1ACETATE l)
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
flash point (specify method)
(DEGREES FAHRENHEIT) ,
Iqnition
about
735 f
eF
________________for PVC (ASTM D-1929)
FLAMMABLE limits (PERCENT BY VOLUME)
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical.
SPECIAL FIRE-FIGHTING PROCEDURES
LOWER
Not applicable
UPPER
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating fumes.
UNUSUAL FIRE ANO EXPLOSION HAZARDS NFPA lists ignition temperature of 1274F for dust cloud.
Produces combustible gases above 570F. Fire conditions produce hydrogen chloride,
requiring protective equipment.
trxtahc
Thi, information I* tumtahad without warranty. raoraaantatlon. inducement or licence ot any Kino, leapt met it i, accurate to the pan ol Tannaco Polymer, knowtaooa <* oetetned trom Miuieaa believed by Tannaco Polymer, to M accural* and Tannaco Polymer, doa, not eaaume any legal rmponaibllty tor uaa or raltanca upon earn* Cuatomar* art encouraged to conduct matr own tt< Bator* uatng any product raad it, labat.
root 7n irnt
LTEttHtCOj Tenneco Polymers A Tenneco Company
MATERIAL SAFETY DATA
(Approved by U S, Dapartmant ol Labor as "atsantlally similar" to FORM OSHA-20)
NUMBER
166
SECTION 1 IDENTIFICATION OF PRODUCT
MANUFACTURER'S NAME
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
EMERGENCY TELEPHONE NO.
609-386-9200
ADDRESS
RIVER ROAD, P.0. BOX 129, FLEMINGT0N, NEW JERSEY 08822
TRADE NAME AND SYNONYMS
WIRE & 2022, 2022A , 2024, 2025, 2052, 2060, 2300, 2385, 2580,
TENNECO PVC C0MP0UN0, CABLE 2700, 2710C, 2710C4, 2712, 2714, 2730. 2775. 2780. 2800.
Chemical name and synonyms
2803, 2804, 2814, 2814-1F, 2820 , 2825 2826, 2880, 2900, 2901-1,
POLYVINYL CHLORIDE) COMPOUND. PLASTICIZED (FLEXIBLE) 2905, 2908, 2914, 2922, 2951
chemical family
MOLECULAR FORMULA
mol wt
CHL0R0HYDR0CARB0N POLYMER
(CH?CHC1),,
SECTION II HAZARDOUS COMPONENTS OP MIXTURES
COMPONENT
V.
THRESHOLD UMIT
VALUE
COMPONENT
threshold
% UMIT VALUE
Antimony Compound
.
(0-2.5%)
Barium Compounds
(0-0.8%)
Carbon Black
(0-1.2%)
Diethyl hexyl Phthalate (0- 30%)
(UNITS) n
- 0.5 mg/mJ Diglycidyl Ether
- 0.5 mg/m3 Lead Compounds - 3.5 mg/m^ Mineral Oil
- 5.0 mg/m3 Titaniun Dioxide
(0-0.2%) - 0.5 (0-6.0%) - 0.2 mg/m^
(0-0.3%) - 5 mg/m, (0-7.0%) - 15 mg/nr
SECTION III PHYSICAL DATA
APPEARANCE AND ODOR
Colorless, white, black or colored pellets, practically odorless.
BOILING POINT (DEGREES FAHRENHEIT)
Not applicable
VAPOR PRESSURE (MM OF MERCURY)
Not applicable
vapor desity
(AIR = 1)
Not applicable
solubility in water
Negligible
idIgrees^ahrenheit)
Not applicable
Softens about 160 - 180F
SPECIFIC GRAVITY (WATER x 1)
1.22 - 1.48
PERCENT VOLATILE (BY WEIGHT)
Essentially non-volatile
evaporation rate
iSUTYLACETATE s 11
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
flash point (scmr methoo) Not applicable (DFEGTREaEsS FtAicHRiEzNeHErIT) genera- l-ly over 400 0_F, C0C
FLAMMABLE LIMITS (PERCENT BY VOLUME)
LOWER
Not applicable
UPPER
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical.
special fire-fighting ppocedlires ^3^,. Spray 0r fog may be helpful in reducing flame intensity
and absorbing irritating fumes. Shut off current in electrical equipment or wiring.
UNUSUAL FIRE ANO EXPLOSION HAZAROS NFPA l,ists i-g_n__it_i_o_n_ t_e_m__p_e_r_a_t_ur_e of 608 F for PVC plasticizer
dust cloud and minimun concentration of 0.035 oz/cu. ft. Fire conditions produce
hydrogen chloride, requiring protective equipment._______
TENO 116
Thu Information it fumlaned without warranty, rpr,,entitlon. inducement or ueanaa orany kind, incept that >1 I accurate to tha bail ol Tannaeo Polymer, knowledge or
ootaindd from aourcaa believed by Tannaeo Polymer* to ba accurate and Tannaeo Polymer, doa* not aaauma any legal raaponaibllty tor uaa or raiianca upon cama Cuatomar* ar* ancouragad to conduct their own teat*. Batora uamg any product read Its label
I
LTENNECOJ Tenneco Polymers
A Tnneco Company
MATERIAL SAFETY DATA
(Approved by U.$. Oapartmsnt of Labor as "assantlally similar" to FOAM OSHA-iO)
NUMBER
167
SECTION 1 IDENTIFICATION OF PRODUCT
MANUFACTURER'S name
EMERGENCY telephone no.
TENNECO POLYMERS, INC., RESEARCH AND DEVELOPMENT
609-386-9200
ADORESS
P.0. BOX 129, RIVER ROAD, FLEMINGT0N, NEW JERSEY 08822
trade name and synonyms
EXTRUSION
TENNECO PVC COMPOUND, & MOLDING
3026 , 3063 , 3066 , 3078 , 3083 , 3086 , 3092 , 3098, 3153M, 3159, 3160, 3169, 3179. 3189, 3200. 3211
CHEMICAL NAME AND SYNONYMS
POLY(VINYL CHLORIDE) COMPOUND PLASTICIZED (FLEXIBLE)
CHEMICAL FAMILY
CHL0R0HYDR0CARB0N POLYMER
MOLECULAR formula
(CH?CHCl)n
mol wt
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
Bari in Compounds Diethylhexyl Phthalate Mineral Oil Tin Organic Comp. Epoxidized Soybean Oil
V,
(0-1.3%) (0- 38%) (0-0.8%) (0-2.3%) (Q-2,5%)
THRESHOLD LIMIT VALUE
(UNITS)
0.5 mg/m3 5 mg/m3 5 mg/m3
0.1 mg/m3 0.5 mfl/jn.3-
COMPONENT
Titaniun Dioxide (0- 1%)
Carbon Black
(0-0.5%)
% THRESHOLD UNIT VALUE
(UNITS)
15 mg/m3 3.5 mg/m3
SECTION III PHYSICAL DATA
APPEARANCE AND OOOR
Colorless, white. black or colored pellets, practically odorless.
BOILING POINT (OEGREES FAHRENHEIT)
Not applicable
VAPOR PRESSURE (MM OF MERCURY)
Not applicable
VAPOR desity (AIR = 1)
Not applicable
solubility in water
Negligible
(mdeelgtrinegespFoainhtrenheit) hroi,,o*t applica.b..le
Softens about 160 - 180F
SPECIFIC GRAVITY (WATER = 1)
1.20 - 1.40
PERCENT VOLATILE (BY WEIGHT)
Essentially non-volatile
EVAPORATION RATE (BUTYL-ACETATE s 1)
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARO DATA
flash point (specify method) Not app 1 i cable
(DEGBEES FAHRENHEIT)
,,
_____ 0l-
"Tastici zer generally over 400 F, COC
flammable limits
(PERCENT BY VOLUME)
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical.
LOWER
Not applicable
UPPER
SPECIAL FIRE-FIGHTING PROCEDURES
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating funes. Shut off current in electrical equipment or wiring.
NFPAunusual fire and explosion hazards lists ignition temperature of 608F for PVC-plasticizer
dust cloud and minimun concentration of 0.035 oz.cu. ft. Fire conditions produce
hydrogen chloride, requiring protective equipment.
TFxrnit7
Thi* information la tumishad without waiTaniy. rapraaantatton, mducamant or lieanaa of an, kino, aicapt ihat 'I n accurata to tha Baat Ol Tannaco Potymart knowiadga or ooiamad Irom aourcaa tMliavad (hr Tannaco Polymara to So accurate ant) Tannaco Polymer, doe, not aitume iny lagai rtaooniiOllty tor uaa or rauonca upon tamo
Tenneco Polymers
A Tenneco Company
MATERIAL SAFETY DATA
NUMBER
169
(Approve by U S. Dapartmant of Labor as "assentialty similar" to FORM OSHA-20)
SECTION 1 IDENTIFICATION OF PRODUCT
MANUFACTURER'S NAME
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
adoress
RIVER ROAD, P.0. BOX 129, FLEMINGTON, NEW JERSEY 08822
TRADE name and synonyms
TENNECO PVC COMPOUND, RIGID
3711, 3750, 4703
chemical name and synonyms
POLY(VINYL CHLORIDE) COMPOUND
CHEMICAL FAMILY
CHL0R0HYDR0CARB0N POLYMER
molecular formula
(CH?CHC1)n
EMERGENCY TELEPHONE NO.
609-386-9200
MOL. WT.
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
Carbon Slack Lead Compounds
Mineral Oil
(0-0.6%)
(0 - 4%)
(0-0.5%)
THRESHOLD % LIMIT
VALUE
COMPONENT
THRESHOLD % LIMIT
VALUE
(UNITS)
3.5 mg/m 3
Tin Organic Compound
0.2 mg/m3 Titaniun Dioxide
5 mg/m3
(UNITS)
(0-2%) - 0.1 mg/m3 (0-1%) - 15 mg/m3
SECTION III PHYSICAL DATA
APPEARANCE AND ODOR
White, Black or Colored Pellets, practically odorless.
SOILING POINT (DEGREES FAHRENHEIT)
Not applicable
(MDEeLgTrINeGesPFOaINhTrenheit)
No.t applicable
Softens about 160 - 180F
VAPOR PRESSURE (MM OF MERCURY)
Not applicable
vapor desity
(AIR * 1)
Not applicable
SOLUBILITY IN WATER
Negligible
SPECIFIC GRAVITY (WATER * 1)
1.32 - 1.42
PERCENT VOLATILE (BY WEIGHT)
Essentially non-volatile
evaporation RATE (BUTYLACETATE = 1)
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
I gm ti onflash point (specify method) about 735F auton FLAMMABLE LIMITS
"WIYSTSBout 850F (ASTM D-1929)
(PERCENT BY VOLUME)
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical 4
LOWER
Not applicable.
UPPER
specialfire fighting procedures Water spray or fog may be helpful in reducing flame intensity and absorbing irritating fumes. Shut off current in electrical equipment or wiring.
unusualfipeanoexplosionhazaros nFPA lists ignition temperature of 752F for layer and 1220F
for PVC dust cloud. Produces combustile gases above 570F. Fire condltipos produce
hydrogen chloride, requiring protective equipment.
TEN0118
Thu intnyrrmny' n tumwwi without rnniy r,c'ntnon inducwnfit of iic,nn ol try kmo iewi thti n u KCurtt* to th< Mat of Tnneo Poiynwr, knowiHO*
f
[TfNNECO, Tenneco Polymers A Tnnco Company
MATERIAL SAFETY OATA
number
190
(Approval by US. Dapartmant of Labor as "assantlally similar" to FORM OSHA-20)
SECTION 1 IDENTIFICATION OF PRODUCT
UAMiiFiCTllftER'ft MAME
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
ADDRESS
RIVER ROAD, P.0. BOX 129, FLEMINGTON, NEW JERSEY
08822
EMERGENCY TELEPHONE NO.
609-386-9200
trade name and synonyms
TENNECO PVC COMPOUND, RIGID 3773, 3774, 3775
CHEMICAL name anO synonyms
POLY(VINYL CHLORIDE) COMPOUND
chemical family
CHL0R0HYDR0CARB0N POLYMER
MOLECULAR formula
(CH2CHCl)n
MOL WT.
SECTION II COMPONENT
HAZARDOUS COMPONENTS OF MIXTURES
% THRESHOLD LIMIT VALUE
(UNITS)
COMPONENT
Tin Organic Compound (0-3%) - 0.1 rng/m^
% THRESHOLD LIMIT VALUE
(UNITS)
SECTION III PHYSICAL DATA
APPEARANCE AND ODOR
White or colored pellets, practically odorless.
BOtUNG POINT (DEGREES FAHRENHEIT)
Not applicable
m(DeElGtRinEgESpFoAinHtRENHEIT)
Not aDDli cable
llu u arP 1 1 '-au * =
Softens about 160 - 180F
VAPOR PRESSURE (MM. OF MERCURY)
Not applicable
SRSSC.TWITV 3773, 3775 1.44 - 1.48
3774
1.40 - 1.44
VAPOR DESITY (AIR s 1)
Not applicable
PERCENT VOLATILE (BY WEIGHT)
Essentially non-volatile
solubility in water
Negligible
EVAPORATION rate (8UTYLACETATE = 11
Not applicable
SECTION IV FIRE AN0 EXPLOSION HAZARD DATA
flash point (Specify M6TMOO) Igni t ion about 735F auto flammable limits
gffftfTWWout 850 F (ASTM D-1929)
(PERCENT BY VOLUME)
lower
Not applicable
UPPER
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical.
SPECIAL FIRE-FIGHTING PROCEDURES
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating furies. Shut off current in electrical equipment or wiring.
unusual fire ano explosion hazards NFPA lists ignition temperature of 752F for layer and 1220F
for PVC dust cloud. Produces combustible gases above 570F. Fire -CQDdJtiQns
produce hydrogen chloride, requiring protective equipment.
TEN0 119
LTENNECQ
Tenneco Polymers
A T*nneco Company
MATERIAL SAFETY DATA
(Approval by U.S. Dopartmant of Labor as "asaantially similar" to FORM OSHA-30)
NUMBER
200
SECTION 1 IDENTIFICATION OF PRODUCT
MANUFACTURER S name
TENNECO POLYMERS, INC., RESEARCH & DEVELOPMENT
EMERGENCY TELEPHONE NO.
609-386-9200
ADDRESS
RIVER R0A0, P.0. BOX 129, FLEMINGT0N, NEW JERSEY 08822
TRADE NAME AND SYNONYMS
TENNECO PVC COMPOUND, RIGID 3780, 3782
CHEMICAL NAME AND SYNONYMS
POLY(VINYL CHLORIDE) COMPOUND
ruFUlTil PAUII V
CHL0R0HYDR0CARB0N POLYMER
MOLECULAR FORMULA
.jCH2CHCl)n______
MOL WT
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
Tin Organic Compound
threshold
V. UMIT VALUE
(UNITS)
(0-3%) - 0.1 mg/m^
COMPONENT
Acrylic Resin
(0-2%) - 10 mg/m^ (ACGIH)
THRESHOLD /. UNIT
VALUE
(UNITS)
SECTION III PHYSICAL DATA
APPEARANCE AND ooor
White or colored pellets, practically odorless.
BOILING POINT (OEGREES FAHRENHEIT)
Not applicable
VAPOR PRESSURE (MM. OF MERCURY)
Not applicable
vapor oesjty
(AIR = 1)
Not applicable
SOLUBILITY IN WATER
Negligible
(MdEeLgTrINeGesPFOaINhTrenheit)
Not applicable
Softens about 160 - 180F
SPECIFIC GRAVITY (WATER <= 1)
1.32 - 1.42
PERCENT VOLATILE (BY WEIGHT)
Essentially non-volatile
EVAPORATION RATE (BUTYLACETATE = 1|
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
(FDLEAGSRHEPEOSIFNATH(SRPEENCHIFEYITM) ETH,OO) TT ny n i t i O n
about
735F
auto- flammable umits (PERCENT BY VOLUME)
ignition about 85QF (ASTM D-1929)
LOWER
Not applicable
UPPER
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical
SPECIAL FIRE-FIGHTING PROCEDURES
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating fumes. Shut off current in electrical equipment or wiring.
unusual fire and explosion hazards NFPA lists ignition temperature of 752F for layer and 1220F
for PVC dust cloud. Produces combustible gases above 570F. Fire conditions produce
hydrogen chloride, requiring protective equipment.
TEN0 120
Thu IhfrvrfhAUrth ift ftiFfMBhACl Wilhnut
rpnrsisptsnnn Irvrtitr
ftt tlrun*# nt Ahv kmrt *irr*r>' njf t n ArCijfit* trt th# Kat nl
PoWfhRfl knowlftOOftO*
I
LTINNCO
Tenneco Polymers
A Tenneco Comony
MATERIAL SAFETY DATA
(Approved by U.S. Dapartmant of Labor as "assantlally similar" to FOAM OSHA-20)
NUMBER
168
SECTION 1 IDENTIFICATION OF PRODUCT
MANUFACTURERS name
EMERGENCY TELEPHONE NO.
TENNECO POLYMERS, INC., RESEARCH AND DEVELOPMENT
609-386-9200
ADORESS
P.0. BOX 129, RIVER R0A0, FLEMINGT0N, NEW JERSEY 08822
TRADE NAME ANO SYNONYMS
1684, 1688, 1689, 1755-1, 1755-5, 1776-2,
TENNECO PVC COMPOUND, RECORD 1809, 1815-2 , 1820-6
CHEMICAL NAME ANO SYNONYMS
VINYL CHLORIDE - VINYL ACETATE COPOLYMER
CHEMICAL FAMILY
CHL0R0HYDR0CARB0N COPOLYMER
MOLECULAR FORMULA
{CH2CHC1) X (CH?CH0C0CH3)v
MOL WT.
SECTION II HAZARDOUS COMPONENTS OF MIXTURES
COMPONENT
THRESHOLD A LIMIT
VALUE
(UNITS)
COMPONENT
Carbon Black Lead Compounds
(0.1-1%) - 3.5 mg/m^ (0 -2%) - 0.2 mg/m^
THRESHOLD % UMIT
value
(UNITS)
SECTION III
APPEARANCE AND OOOR
Black pellets, practically odorless
BOILING POINT (DEGREES FAHRENHEIT)
Not applicable
VAPOR PRESSURE (MM OF MERCURY)
Not applicable
VAPOR DESITY (AIR s 1)
Not applicable
SOLUBILITY IN WATER
Negligible
PHYSICAL DATA
(MDEeLgTrINeGesPFOaINhTrenheit)
Not applicable
Softens about 130-150F
SPECIFIC GRAVITY (WATER * 1)
1.35 - 1.39
PERCENT VOLATILE (BY WEIGHT)
Essentially non-volatile
EVAPORATION RATE (BUTYULCFTATE = 1)
Not applicable
SECTION IV FIRE AND EXPLOSION HAZARD DATA
(fDlEaGsRhEpEoSinFAtH(SRpEeNcHifEyITm) ethofd^) rI on^i ti on abopu^t g7g3g5) F
FLAMMABLE LIMITS (PERCENT BY VOLUME)
FIRE EXTINGUISHING MEDIA
Water spray, carbon dioxide or dry chemical
LOWER
Not applicable
UPPER
SPECIAL FIRE FIGHTING PROCEDURES
Water spray or fog may be helpful in reducing flame intensity and absorbing irritating funes. Shut off current in electrical equipment or wiring.
NhKAUNUSUAL FIRE AND EXPLOSION HAZARDS lists ignition temperature of 608F for PVC-plasticizer
dust cloud and minimun concentration of 0.035 oz./cu. ft. Fire conditions produce
hydrogen chloride, requiring protective equipment.
JEN0"21
This InfflffRitlnn
*pi*hAnt wtrrmv '*<*'*siin
Ar
n< sriu km/1 tvpsnt tht* .( r'ii*r
Iwl T ****
v
MATERIAL SAFETY DATA SHEE
tenneco POLYMERS, INC.
P. 0. BOX 2511 HOUSTON, TX 77001
1. MATERIAL IDENTIFICATION
material Methanol
MSOS NO.
ate , .
_______ 110
3/6-
HAZARD RATING*
material / trade name synonyms Methyl
Methanol Alcohol, Wood Alcohol,
2< hour emergency telephone tenneco 713 L79-3L11
Carbinol chemtrec oo a**o
CHEMICAL FAMILY / FORMULA Alcohols/CH^OH
CAS NO. 67-56-1
1I 1 1 T~1
HT~1
HEALTH FIRE REACTIVITY
0 LEAST
3 HIGH
1 SLIGHT 4 EXTREME
2 MODERATE . NFpA ^
II. INGREDIENTS
COMPOSITION
Methyl Alcohol
% toxicity oata
99.9 8 hr TWA 200ppm (260mg/m^) (skin)
Human
Eye-5ppm
Oral-LDLo 3k0mg/kg
_
Inhalation-TCLo 86000mg/in
(irritatcr
Rat - Oral LD^q 13gm/kg
III. PHYSICAL DATA
BOILING POINT. 7E0*nm/Hg -- ll*8F (6U.5C)
SOLUBILITY IN H, 0, % BY WEIGHT
-- Totally niscit-
SPECIFIC GRAVITY. H,0*1 -- VAPOR PRESSURE. mm/Hg -- VAPOR DENSITY. AIR * 1 --
0.791
e96 68F (20C)
1.11
EVAPORATION RATE. BUTAL ACETATE * 1 -
Molecular Weight
--
Melting Point
--
1*.6 32.01* -1ULF (-97-2C
VOLATILES, % BY VOLUME -- 100
appearance ano ooor Clear, colorless liquid with characteristic alcohol odor. Less pure grades may have a pungent, oily odor.
IV FIRE AND EXPLOCION DATA
flash POINT AN0 TEST METHOD
5l*F (12.2C) TCC
AUTO IGNITION TEMPERATURE
867F (l*6l*c)
flammability limits in air. % by volume
LOWER 6
UPPER
36.5
exinguishing media
Dry chemical, alcohol type foam, CO^. Water may be ineffective. Use water spray to cool fire exposed containers. Use alcohol resistant foam to extinguish large fires or to blanket spill to reduce vapors.
pROCEOuFE$F,OMTINa Class IB flammable liquid. Avoid water streams which may splash and
spread flamming liquid. Vapors are heavier than air and may flow along
surfaces to distant ignition sources and flash back. Fire fighters should
use self-contained breathing equipment and protective clothing for fires ir.
unusual pipe and
enclosed areas.
TENO 122
explosion hazards Reacts violently to oxidizers. Keep away from heat, sources of ignition.
Burns with a clear, almost invisible flame, especially hard to see in sorer-
I
IX. EMPLOYEE PROTECTION
MSOSNO.
110
PAGE 3 OF 4 MATERIAL
''ethic:!
RESPIRATORY PROTECTION
Provide adequate ventilation or exhaust to meet TLV requirements. Air supplied or self-contained breathing equipment recommended for exposures above TLV.
PROTECTIVE clothing
Rubber gloves and rubber protective aprons or clothing required to prevent skin contact. Goggles or face shield should be used to protect face and eyes from splashing.
OTHER PROTECTIVE MEASURES
Eye wash and safety shower should be provided in area of use.
X. ENVIRONMENTAL PROTECTION
SPILL CLEAN-UP PROCEDURE
Eliminate all ignition sources. Stop spill or leak if it can be done safely. Contain spill to smallest area possible. Use absorbent materials to soak up small spills. Larger spills should be recovered for reuse or disposal. Spills in critical areas can be diluted with water to reduce fire hazard during cleanup. Do not allow to material to enter sewers, drains or waterways.
WASTE DISPOSAL
Waste materials should be disposed of by a licensed solvent waste disposal company. Federal, state and local regulations msut be followed.
ENVIRONMENTAL HAZARDS
Aquatic toxicity rating - TLm 96:
over 1000 ppm.
XI. SPECIAL PRECJUmOW
Store in closed containers in cool place. No smoking allowed in areas of use or storage. Use explosion-proof electrical fixtures. Containers should be electrically grounded/bonded during material transfer to prevent static spark. Corrosive to lead and aluminum.
XENO 123