Document kdbkXekBxEK6QBR3bEw3XemB

DIXIE-LAC Quick-Drying ENAMEL For use on furniture, kitchen and bathroom walls; woodwork; toys, boats, au tos, porch and lawn furniture; vehicles, implements, or wherever a hard, smooth, gloss finish is desired. Dries dust-free in two hours and hard in 4 to 6 hours, de pending on weather conditions. Dixie-Lac may be used for any interior or ex terior enameling. DIRECTIONS Stir enamel thoroughly before using. OLD PAINTED SURFACES--Remove loose paint and rough spots by sanding lightly with fine sandpaper. Then wipe off with wild soap and water; let dry well. One coat of DixieLac usually is sufficient Two coats may be applied if desirable. Let first coat dry over night. If a distinct change in color from dark to light is planned, clean the surface carefully and proceed as suggested for new wood. NEW UNPAINTED SURFACES--Apply Dixie-Lac Flat White as a first coster. For second coat, nix equal parts of Dixie-Lac Flat White and Dixie-Lac Enamel. Final coat should l>. Dixie-Lac Enamel as it comes from the can. Sand lightly between coats. PLASTER WALLS--New plaster should be primed with Interior Base Coat Finish with one or two coats of Dixie-Lac. On old painted surfaces Dixie-Lac may be applied without undercoater. However, if old surface is porous or worn from repeated washings, a coat of Interior Base Coat should be applied. (Dixie-Lac will cover about 600 square feet per gallon depending upon nature of surface.) 64 WHEN DIXIE-LAC IS FOUND TOO HEAVY, THIN WITH TURPENTINE GLD31593