Document kDO0KdkZdwpNB6LDvn00aN5qV

FILE NAME: Exxon (EXX) DATE: 1937 July DOC#: EXX003 DOCUMENT DESCRIPTION: Internal Report - Dust Producing Operations the Production of Petroleum Products and Associated Activities .<T* _ V \ > vw- .** .*>r. </.t DUST ' ; PRODUCING OPERATIONS Vv < ' IN THE *r, . * \ . -* * n* *"i* PRODUCTION OF PETROLEUM PRODUCTS AND ASSOCIATED ACTIVITIES:! v k: . 5. . . / A M EDICO-SAFETY SURVEY .. ` BY - Roy S. Bonjib.U. A.,E. M. _ CH IEF SA F E T Y NSPECTO R ' STANDARD OIL COMPANY IN . J J FOREWORD BY / Willard J. Donno, M. D* GENERAL M EDICAL & RECTVR STANDARD OH COM PANY J N . J L r . V -*V` . * t . s t a n d a r d o il COMPANY (N . j .) 30 ROCKEFELLER PLAZA * . * NEW YORK, N. Y. . . 4 * . V JULY - 1937 : * "& . no njrt or this n-lctin m*t { ouNucro 0* HjitUMto ,;."J . . ' - nTMOin w n w u".*'-,..'* '*' ; .-vrj^^rl(, V-r -' ' EM001483 M m FOREWORD Because it is the duty of industry to protect its employees and because no comprehensive survey of the hazards incident to oc cupational dust pro-lens had yet been aade, it was felt that here was an opportunity to render a serivce to the petroleum industry and its employees by Baking such a survey. It is hoped that the information presented in this bulletin will assist in finding proper answers to-same of the many questions which have recently arisen concerning the health hazards of employ ees whose work involves exposure to dusts of various origin. in attempt has been aade to consolidate opinions from the most experienced students of occupaticnal-dust problems to show the relative hazards of dusts and the duration of exposure which may prove harmful to the worker. Furthermore, a study of the prevalence of dust particles oc curring in various operations in the petroleum industry' has been made and included in this report; also a description of the pro tective devices and equipment provided for the protection of the workmen. This report should serve as a guide to operating executives and safety' engineers in handling personnel and in providing adequate protection in dusty occupations. It should also resolve many of the fears and questions of industrial workers in these occupations. The study confirms an opinion that dusty occupations, thor oughly understood and intelligently handled should result in no serious disability. General Medical Director Standard Oil Company (H. J. ) i E PO 01484 MEDICO - SAFETY MEMORANDUM DUST PRODUCING OPERATIONS IN THE PRODUCTION OF PETROLEUM PRODUCTS AND ASSOCIATED ACTIVITIES CONTENTS PART I - DUST AS A HEALTH HAZARD ii - wblat is ^ ast si "d u s t "?..................................... H I - WHAT API TEZ PHYSIOLOGICAL EFFECTS PP.CZTOZZ 3Y The Inha.le.tio:: of Dust................................... Silicosis in j e a e r a L ................................ First National Silicosis Conference.................. Silicatosis........................................... Asbestosis.............,................... .......... 17 - WHAT IS TEZ MAZ2 Z M PZFDZS3AZ1 Z DUST CCTCZrTHATICir? Formula Pur Determining Maximum Remissible Coneentratio: of i n The Air Breathed........................... Safe Dust Concentrations, Imrringer Semples.............. 7 - ECV MAY THE CCMOZHTHATIC:: All CZAHAOTZ?. OF* IHDTSTP.IAl DUSTS BZ DETZBMTED?......................................... The Impinger Apparatus................................... The Zeiss Zoniaeter...................................... The Bausch A Lamb Dust Counter........................... PART II - DUST PRODUCING OPERATIONS STUDIED WHAT ARI THE PHIDCIPAL DUST PRCD7CIUG CPZRATrCKS? 2 2 4 4 5 7 7. e 9 9 10 ,11 11 11 I - SATD-BLASTire............................ ............................ 13-15 II - FILTZBIG OPZPAT IONS.............................. .................. 15-27 A - Filter Clay or Fullers Earth; What is Filter Clay or Fullers Earth?........................ How is Filter Clay Mined and Prepared?....................... How is Filter Clay Used?...................................... "Burning" Clay............................................. Charging Filters........................................... Dumping Filters....................................... Composition of Filter Eouse Air Borne Dust................... Control of Filter Clay Dust.................................. 15,16 16,17 17,18 18,19 19,20 20,21 21 22 B - Contact Clay: Main Constituents of Contact Clays......................... . What is "Filtrol" and How is it Produced?.................... What is the Chemical Composition of Filtrol?............ . How is Contact Clay Used?......... !.......................... 22,23 23,24 24,25 25,26 E^OOl 8 5 page C - 3cne Black or Charred Sore; How is Bore Slack Used....................................... 26 111 - -'SnAIIITG OPERATIONS; A - What Physiological P.eactioss are Provoked by Insulating Kateritls?...................................... 27 3 - What Are The Principal Insulating Operations and How Kuch Dust is Produced During Such Operations?......... . Insulating 12" Steam Lines................................ Insulating a 75C-?ound Cracking Coil Accumulator......... Insulating Treating Plant Acid Suction line.............. InsulatiSg Cracking Coil Hot Oil lines.................... lismrrling or P.enorring CldInsulation..................... Crushing Scrap Asbestos................................... Crushing H i Cork Insulation.............................. 27 27,29 25 25 25 28,2S 29 29 What Is G'unite end How Is It Applied?............ a ** "t***--# ~ - r* ...... ........ . A - Weldins Operations; 1. Elec trie Arc Welding.......................... What are Coated Electrodes?............................ What do These Electrodes Contain and What Products Result Pror Their Use?..................... What is The Amount and What Are the Characteristics of Puaes or Dust Produced By The Various Zlectric Arc Welding Operations...... What Physiological Effects on Welders is Produced by The Use of Coated Electrodes............ 30,31 31,32 32-35 35-37 2. Cxy-Acetylene Welding............................. 37 Tunes or Dust Produced by Cny-Ac-etylene Welding. 37 B - Burning or Cutting Operations; 1. 'With Cny-Acetylene....................................... runes or Dust produced by Cxy-Acetylene Burning......... 2. With Natural Gas......................................... 37,38 38 38 C - Health Hazards Produced by Welding and Cutting Operations.... 38 VI - GRI'NDING OPERATIONS; What is The Composition of Grinding Wheels?................. Is Abrasive Dust Harmful?.................................... 1 - What are the More Frequently Used Types of Grinders, the Quantity and Character of the Dust they Produce?. 39 39,40 40 EK001486 *L tz tz wz wz 3- PAGE A - TANDEM FLOOR TOOL GRINDERS................................... Dust Produced by Tandem Floor Grinders.... ................ Dust Produced by Tanden Bench Grinders...................... Characteristics of Dust Produced by Tandem Bench Grinders............................................ 40.41 41.42 41 41 42 C - S 3 G 'T FLOCP. TOOL GR^OERS................................... Dust Produced by Single Floor Grinders...................... Characteristics of Dust Produced.,.......................... D - TIOTZRSAL GRINDERS........................................... .St j'Toduc oc riders ** Charactersitics of Dusu Produced............................ T' c*TMT4^T <'*rT,',"TiC Dust Produced by Surface Grinders........................... 43 43 42 *f *8>A 45 45 45 f - l a n d i s t c c l g r i n d e r s ............. ........................... Dust Produced by Landis Tool Grinders...................... 45,46 45 G - YAI" " DRILL GRINDER......................................... 46 Dust Produced by Yankee Drill Grinder....................... 46 e - a t t c m a t i c c i r c o l a r s a w s e a r p i n ::::- m a c e i n e . .................. Dust Produced by Yankee Drill Grinder....................... I - AUTOMATIC BAIO SAW GEINDrE................................... Dost Produced by Auuoaatic Band Saw Grinder................ J - AUTOMATIC BAIO SAW LAP GRINDER............................... Dust Produced by Lap Gr'-der................................ K - FLAMING EMINE BLADE GRINDER.................................. Dust Produced by Blade Grinder.............................. L - LINDEHMAN COTTER GRINDER..................................... Dust Produced by Cutter Grinder.... ........ ................ K - GANG SAW BLADE GRIIOER....................................... Dust Produced by Gang Saw Blade Grinder.................... N - EDGER SAW GRIIOER............................................ Dust Produced by Edger Saw Grinder.......................... 0 - CIRCOLAR SLAB COT-OFF SAW GP.UOER............................ Dust Produced by Cut-Off Saw Grinder........................ P - "HOG K1IIFE" GRIIOER.......................................... Dust Produced by "Hog Knife" Grinder........................ Q - COTTER GRINDER,.............................................. Dust Produced by Cutter Grinder............................. 46 46 46,47 47 47 47 47 47 47 47 47 47 47 47 47,48 48 48 48 48 48 What Precautions.Should Be Adopted For Safiruarding Those Who Ose Grinding Wheels?....................... , , 48 E P0 01487 Control of Dust ftroa Grinding Wheels................. HANDLING POWDERED OR PPLVERIZZD MATERIALS t A - LIE: (1) Eydrated Line.................................. (2) Luap Quick Line....... ........................ What Physiological Effect is Produced by Line Dust. B - METALLIC 2ISC DOST Typical Screen Analysis . . ................ ........ Du s t Produced........................... ........... What Physiological Effect is Produced by Zinc Dust. C - ASBESTOS "BLOAT": Dust Produced...................................... Physiological Effect of Asbestos Particles........ D - GP.CIND MICA: Dust ?roduced........................... ....... . Physiological Effect of Mica Dust.................. (1) Sulphur Flour....... *........... , (2) Crude Sulphur.................... Physiological Effect of Sulphur..... . LITEAP.GE: Dust Produced........................ . Necessary Precautionary Measures When Handling Litharge................... SCDA ASZ: Dust Produced........ ..................... . E TALC or "SOAPSTONE": Dust Produced.............................. , Physiological Effects Produced by Talc Dust, GRAPHITE: Dust Produced, J -- SiAT-- FLOUR: Dust Produced..................... Effect of Slate Flour on the Lungs, K - GRINDING DZRRIS ROOT: Dust Produced........ ............ To What Extent is Derris Toxic?... L - GRINDING PTRZTHROM FLOWERS: Dust Produced........... K - MINING AND PACKING "FLIT" POWDER: Dust Produced.................. Filling Cans................... E *0 Cl 48 8 PAGE 52 52,53 52 53 53,54 54,55 55,56 57 57 57,58 58 58 C r 5- ZZI - c*? atttttt? TZ5ES AITO DRUMS: I - CRACEING COIL SOARING DRUMS: Dust ?roduced............ II - CIAC!HZG C C H TUBES: Dus-r Produced.... VATI?. HEATERS AND SCILI?. TUI IS: Dust Produced................................... Cannositian of Due. frcn Front Water Wall Header PAGI 5 c.,5 9 59 Ci c * X - a - p o u r i n g m o l t e n m e t a l z z c s a n d k z s ... 5 - "s h a z z ::- cur" c a s t z :g s .................. j - c l e a n i n g c a s t z t g s : (a) Preliminary Cleaning..... ........ (b) Tuhtlast.......... ............... (c) Sly Tussling Mill................. (d) Tmbling Barrels.................. (e) Air-Blasting...... ............. (f) Hough Snagging Wheels.............. (g) Pise Snagging end'Polishing Wheels. (h) Cone Grinding Wheels............... Average Dustiness of Cleaning Room Air. D - CORE MAZING............................. E - SEPARATION OP BRASS FOUNDRY SEIMMINGS... MASON'S OPERATI CIS: I - TEARING OUT STILL PISE BOXES..................................... II - CEIPPZIG OR CUTTING CONCRETE...................................... _ * Cn.rr ING MORTAR FROM Bn. WEE1*snl CE............................... 77 - CRUSHING EIRE BRICE............................................... V - SHAPING PIRI BRICE ON EMERY WHEEL................................ VI - DISMANTLING MASONRY............................................... XI - WOODWORKING OPERATIONS: _ A - BOX SHOOE MANUFACTURE (a) Resawing................................. (b) Ripsawing............................................... (c) Cut of Sawing........................................... (d) Planing................................................. Dustiness of Shook-Factory Air......... .................... B - BELT SANDERS, SAND DISCS AND SPINDLES OR CYLINDERS: ' (a) Belt Sanders........... .............. .................. (b) Sand Discs or Wheels................................... . (c) Sand Spindles or Cylinders.............................. C - MAZZJG WOODEN CRATES: (a) Band Saws............................................... (b) Railroad Saws....................................... EM001A89 60,51 61 61 61,62 62 62 62.63 6c 62.64 64 64 64.65 65 65 65 65,6o 66 66 66 67 67 67 67 ,68 6B 6B 68,69 69,70 70 70 -6- XII - RICH ZXCAYATION tP PAGZ 1 | A - DRILLING................................................... 70 2 - BLASTING................................................... 71 i c - k u c z t t g .................................................... 7i d - d u s t c o n t r o l e r a s u r e s -. (a) Wet Drilliag and Wert lag Dowa Hock Walls aad Muck Piles........................................... 71 (b) Geaeral Veatilatioa................................... 71 (c) Durr Zxhausr Zoods oa Drills aad Other Euckiag Cperarioas aad LocalSources of Dust................. 71,72 Rersoaal Prorectioa by Hears of Respirarcrs aad ?osirive - Pressure Masks....................... 72 PART III - MEASURES FOR REDUCTION OF THE DUST HAZARD A - DESIHT PLATT PC?. DUST CONTROL.......................... 74 b - p r c v i i z 3 U H D r i s t z n t t l a t i c ::............................ 74 C - STCRI DUSTY KAIZP.LALS IT DUS7-TIGZT 2ZTS............... 74 D - ZNCLCSI MATERIAL HANDLING Z O U I H Z N T .................... 74 Z - ISOLATE DUSTY PP.CCZSSZS................................. 74 F - FRC7IDZ WZT ETTZDDS CF OPERATION....................... 74 c- - i z s i t : ic ti pi-z n t t o c c n t r c l d u s t ....................... 75 Z - PR.C7III ZXZAUS: S Y S T Z Z ....................... 75 _ : - ISTAZLTSZ MAIN7ZNANCZ AED 3CCD ZCUSEEIZPINC- FHCCZDUZZ... 75 J - PP.C7HZ RESPIRATORS......................... 76 (a) Air rurifyiag Types qf P.espirarors................. (b) Supplied Air P.espirarors............................ The Air Liae Respirator........................... Abrasive Blastiag Respiraror...................... (c) Accepraace aad Use of Persoaal Respiratory Prorectioa by Workaea............................. (d) Use, Maiateaaace aad Care of Respirators........... 76,77 77 78,79 79 79,90 80 WHAT TTZPICAL CCNTRCL SHOULD 31 INZP.CISII IT THE SELECTION ATI SUPERVISION Of MEN WQRUZTI- N DUS77 JOBS?............... 80,81 PHYSICAL EXAMINATIONS................................... 80 DZSIRA3LZ PEYSICAL QUALIZICA.TICXS....................... 81 RZ-ZXAI-TIIIATICIIS......................................... 81 T H E LIMITATIONS CONCLUSION..................................................................... 81,82 E KO 01490 STANDARD OIL COMPANY {Incorporated in New Jersey ) 30 Rockefeller Pisa New York. N. Y. MEDICO - SAFETY MEMORANDUM DUST PRODUCING OPERATIONS IN THE PRODUCTION OF PETROLEUM PRODUCTS AND ASSOCIATED ACTIVITIES Z'~~ZZ"ZZZZZ~. - I-ei-E 1 w>wr upon et objectionable, dust today is also recornic ed as darrerous - especially win*, regard to occupational disease (Pneumoconiosis} and dust explosions. Since the dust encountered in the production of Petrolens products and associated operations are non-explosive under ordinary working conditions, no further attention will be devoted to this phase of the dust hazard. Studies hare revealed that the time elenent (exposure) end the concentration and size of the dust particles are najor factors in producing health hazards. Here tofore difficulty has been enco:stered in determining actual dust concentrations and sizes of the particles, but recently developed instruments such as the Zeiss Eonineter and the Bausch 4 Lcmb Dust Counter make it possible to obtain oust courts arc estimate size of dust particles which, while not absolutely accurate, are indicative of the dustiness of the area. The data presented in this memorandum are based upon material taken from the available literature on the subject, upon field investigations and conferences with technical specialists and upon 1006 actual cust counts made with a Zeiss Eonineter, using a 20 to 30 micron (a micron is about 1/25,000 of an inch) porcelain filter. In. the report of the Preventive Engineering Ccrsnittee of the Air Eygiene "oundaticn, Professor Philip Drinker of Harvard, chairman, and other technical specialists on the Casmittee write: "If the breathing of dust causes disability of amy sort - silicosis is only one manifestation - then it follows that there must be some degree of air cleanliness from which no disability will result to the average man during the average working period. * "There is no satisfactory medical answer at present to this question, but the engineer is making a bad mistake if he lets men breathe heavy dust concen trations of any material. If no other reason for dust control oan be found, then one should read transcripts of some of the recent suits at common law in which fantastic damages for alleged silicosis were granted to men who breathed dust containing little or no silica. The Courts and Compensation boards are not impressed with subtle distinctions between dusts with 10# and 40# quartz, especially when medical experts are reluctant to make definite statements as to the comparative significance of such differences. "It would be well to realize that men working in dusty trades suffer far more from respiratory troubles of all kinds than r'o men who work in clean air. The evidence that excessive dustiness of anv kin is harmful is beyond argu ment". ' EK001491 PART I * DUST AS A HEALTH HAZARD I - WHY IS TEE DUS" PROBLEM SO IMPORTANT? - Although the subject of the health of workers in dusty trades has been receiving considerable attention iron students of' industrial hygiene for a nunber of years, the seriousness of this problen was not fully realised until it was brought sharply to our attention by the constantly growins country-wide wave of lawsuits instituted in behalf of the victims in our oammon law courts, by the magnitude of the generous verdicts awarded by the juries and by a recent decision of the Federal Circuit Court reversing the substantial award of a jury in a New Jersey case (Pennsylvania Pulverising Company vs. Eldrec G. Butler). Owinr to these developnents, the problen c a m o t be ignored or brushed aside as merely another fort of "racketeering" by unscrupulous lawyers and conspiring doctors. Dodging the issue cannot provide the neeaed solution because even the most .scrupulous lawyers cannot create a pathologic lung at will and, furthermore, even the most skepw tic of coroners frequently finds himself corroborating a diagnosis by his postnorten examination. Enlightened industrialists and the medical profession as well as the bench and bar, have came to the realization that exposure to certain kinds of dust, such as those containing considerable amounts of quartz (silica), has increased the unhealthy bodily condition and death rate frcn respirator;* diseases; while metallic dusts, such as lead and its expounds, have been associated with general systemic poisoning of workers. "Silicosis" is now a definitely recociized disease which is destined to become one of the foremost and most serious of occupational diseases of the future because the number of workers in dusty trades is larger than almost any other group exposed to a single known Industrial hazard. The McCaffrey Act, which became effective September 1, 1935, amending the New York Condensation Law, included silicosis as an occupational disease subject to compensation. _ Sixteen states, as well as those of the Federal Government and of Hawaii, erto Rico, and the Philippine Islands (U. S.Dept, of Labor Bull.No.625,Bur.Labor Sta- -stics), have workmen's Compensation Acts which include compensation for occupational diseases, either expressly or by judicial interpretation, or specific occupational disease acts. II - WHAT IS MIAN? BY "DUST"? - According to Webster's Unabridged Dictionary, "Dust" may be defined as fine, dry particles of earth or other matter so comminuted that they may be raised and wafted by the wind; that which is enabled to minute portions; fine powder. As pointed out by Philip Drinker in a paper read before the Chemical Section of the National Safety Congress (held in Atlantic City, October, 1936), dusts include all types of dry earthy particles small enough to be blown about by ordinary* air currents. Dust suspensions may be generated as the result of grind ing blasting, or comminuting process; or they may result from the handling of fine ly divided materials as in mixing .processes, in sweeping, or the blowing about of wood flour, plant pollens, or common road dust. There is no chemical limitation im plied by the term "dust" while the range in size of dust particles extends from the sub-microscopic to small sand grains. Mr. D. Harrington, Chief Health and Safety Branch, U. S. Bureau of Mines advises that dust as applied to health and respiratory conditions may be wet as well as dry. Under same conditions, such for example as in. wet drilling in mines, the escaping air from the drill hole may (in fact generally ' does) contain a certain amount of entrapped solid material diich undoubtedly is wet rather than dry, yet it remains in the air sufficiently long in some instances at least to be breathed by the workers to contribute to possible health trouble. The size of dust of importance from a hygienic standpoint are those under ten microna. In fact, the sizes found in industrial atmospheres are under two microns for the larger majority* of particles, say 90 to 95 per cent. Physiologically, there are al most as many different classifications of dust as there are authors on the subject, /""'wever, according to Professor Drinker ("Dust, Fumes and Smoke". International La- Cffice, Occupation and Health 7ol. 1, 930, ?, 6C3) all of these classifications EK00IA9? 3- are without much practical importance, since in daily practice in industry the harmful e'^ect is exercised more frequently by dusts mostly of mixed origin. Besides, what is most important is the physical and chemical constitution of the dusts and consequent ly their actios on the system. Ill - WHAT ARE TEE PHYSIOLOGICAL EFIECTS PRODUCT2 B Y TEE mEALATICK OF BEST? - To be harmful from a respiratory viewpoint, dust must be of sufficient finess to pass throurh the nasal filters and be retained in the alveoli (minute air sacs) of the lunzs." Particles found in autopsied lungs are of the order of one micron (a micron is 1/1000 of a millimeter or about l/25,000 of an inch) or less in sise - about the site of the common bacteria. Same dust particles found in lungs are as large as five or six microns although these sixes are rather exceptional. There are five distinct types of reaction produced in man as the result of inhalinr dust. These reactions may be broadly classified, based on the primary cause, as follows: (a) Those which result in lung fibrosis, c o m only referred to as pneu moconiosis. These dusts contain free silica, asbestos, etc. How ever, it is not necessary for fibrous tissue to be formed in order for the disease to be classed as "Pnemaoconiosis". (h) Those which are toxic and are absorbed into the blood stream such as lead, cacmivm, etc. (c) Those which result in what is commonly referred to as metal fume fever; such as zinc oxide, etc, (d) Those which are allergic in character, such organic dusts as pollen, pulverized wood and flour, etc. The breathing of pulverized wood ' and flour is frequently associated wi-ti tuberculosis. (e) Those commonly referred to as "nuisance dusts". These may cause ir ritation of the respiratory tract or passages and may cause con siderable discomfort, also headaches of the dry "nasal" passage or sinus type and exposure to them may be associated with a high in cidence of respiratory illness. The rate and extent of these reactions are dependent upon the resistance of the indi vidual, the exposure period (concentration of particles and length of exposure) tem perature and humidity of the air, rate of work, and the percentage of ingredients which are harmful. Owing to the length of time required to obtain a reaction by inhalation meth ods, the United States Bureau of Mines and the Public Health Service adopted about twelve years ago, a method of injecting small quantities of the duststobe studied into the peritoneal cavity of guinea pigs. ("Response of Peritoneal Tissue of Dusts Introduced as Foreign Bodies" by Dr. John W. Miller, Dr. R.R.Sayers and Wm.?.Yamt, Jour. Amor.Med. Assoc. Sept, 22,1934 - 7ol*103,pps. 907-911). It was found that iden tical reactions occur in each injected with the same dust under the same con ditions and examined in the same time interval after injection. Those reactions were essentially the same microscopically as that produced in the lungs and the gross ap pearance of the dust nodules was sufficiently differentiated to afford a means of classifying the physiological response to the dusts. There are three types of reaction: An absorption or dissolution of the dust. A proliferative reaction. An inert reaction. EP00H93 -4- I E nIoartdhiesaipapeeratrreedacftrioomn.-th'eth-etidsussutes;neiitnhseteradcatuhseedreawnasinmcorreeaseorinlestsheasictheangoef tihne intosdudliesa e c tribution. Soepst, -carborundum (Silicon Carbide), jeweler's rouge (Ferric Oxide), anthracite coal, bihusinnns coal and certain filter clays hare inert reactions. Cal ecditea,n alibmseosrtpotnieo,n rperaecctiipoint.ateQduaeratlso,itemhacta,rbocnearttea,ingyfpislutme,r calnadysPoarntdlanfdlinCtemepnrtoduecxehdibiat c proliferative reaction. tz The physiological response to the injected dusts were found sufficiently well marked in 90 days to determine the type of reaction, particularly w e r e the reaction tz was one of absorption or proliferation. Since the reaction elicited by dust was oonstast and uniform in all of the animals injected with the dust, it is believed c that this response of peritoneal tissue to various dusts can be used as a test to de termine the possible harmfulness of industrial dusts. E The fibrosis-producing properties of a Georgia filter clay (30-60 mesh grade) E a sample of American contact clay and a German contact clay were tested by the Intra peritoneal Method, under the direction of Dr. E. E. Sayers, Medical Officer in tZ Charge, U.S. Public Health Service. The Georgia filter clay showed an inert reaction with a slight tendency towards a proliferation in the 90-day test. The American con tz tact clay showed an inert reaction with evidence of some slight absorption or dis appearance of some part of dust in the 180-day tests. The German contact clay caused tz the formation of light yellowish-hrown nodules and as the interval between the in jection and the examination increased the nodules became somewhat flattened, but the tz amount of dust and the approximate site of the nodule remained the same throughout the entire period (90-days) of the test.. This can be considered an inert reaction; e hut as the dust does not disappear from the peritoneum it should be considered as po tentially harmful though not as dangerous as pure silieau c In eassenting on the results of the tests with the Georgia filter clay and the c American contact elay, Doetor Sayers advised that the results of the test indicated that the filter clay is more harmful than the American contact clay because the dust e remains inert in the tissues as this was the largest portion of the dust and the in ert appearance of the lesions was the most prominent. The modification of the reac c E tion in the filter clay ean be attributed to the presence of 5-10 per cent, quartz (Petrographic), Gypsum in the American contact clay may account for the slight ab sorptive reaction. Doctor Sayers advises that an inert dust, if breathed in suffi cient concentration, may be harmful. These tests were made in accordance with the E E procedure described in Eeprint #1608, Public Health Eeports, Vol. 49, No. 3, January 19, 1934, pps. 80-89. The inhalation of dust gives rise to "Pneumoconiosis" a term derived from the E E Greek pneumon, lungs and konis. dust, and used to designate a pathological condition of the lungs caused by the inhalation of any dust. It includes SILICOSIS, a chronio E disease of the lungs caused by the inhalation of minute particles of free silica (Si0 2 ) dust which produces a permanent incapacitating alteration of the lung tissue; E ANTEHACCSIS, the black lung of the miner due to ooal dust; ANTHEACO-SILICOSIS, the newest of our mineral dust affeetions and introduced by the United States Publio E Health Service as a result of their studies in the Anthracite District of Pennsyl vania. This affection is the result'of breathing anthracite ooal dust that oosrtains silica. The common name for the affection is "Miners' Asthma"; CHALICOSIS, the gray-black lung of the stone-cutter due to stone dust; ASBESTOSIS; in asbestos C C workers due to asbestos dust; SIDEEOSIS, due to breathing dusts of iron ore (The lungs are yellow or red from metallic oxides generally of iron.); BYSSINOSIS, due to cotton particles and vegetable fibre dust, and PNEUMONOULTEAMICEOSCOPICSILICOVOL- CANOKOiriOSIS, a special form of silicosis caused by ultra-microseopic particles of E C siliceous volcanic dust. Silicosis, Asbestosis, and Silico-Anthracosis are the only -ree forms of pneumoconiosis which require practical attention. E E ^OOl 494 -5- While the type of pulmonary lesion depends on the particular dust inhaled, the underlying pathological principle is the same in all forms of the disease, namely, an ultimate fibrosis and replacement of the elastic lung tissue by a hard unyielding fi brous tissue. All occupations that expose men to large amounts of dust may give rise to pneumoconiosis but not necessarily to silicosis. It is now generally agreed that in order to produce the latter, (silicosis) inhaled silica dust must reach the lungs in a chemically uneombined condition, in very fine particles not more than ten mi crons (10/25,000 inch) in diameter and in sufficient amount and over a sufficiently long period of time. In relatively recent literature it appears that the proponents of the idea that only "free silica" is harmful are beginning to have same doubts and to have the thought that possibly some silicates may under same conditions be harm ful. Generally speaking, the necessary length of exposure to produce silicosis is in direct proportion to the sire of the dust particles and inverse proportion to the dust concentration and the amount of free silica in the dust. Silicosis is char acterized anatomically by a generalised fibrosis of the lungs and clinically by short ness of breath, decreased chest expansion and a progressively lessened capacity for work which is out of proportion to the objective physical findings. The effect of ex posure to dust such as silica is cumulative, the rapidity of development of the dis ease depending upon the time and amount of inhalation. Silicosis may develop to the point of causing symptoms only after several years exposure to silicious cust, but it nay be progressive in same cases even after exposure has ceased and nay cause symj>. toms or become disabling long after the workman has left the environment that caused the condition. Some may improve or at least remain stationary in the absence of in fection. Watkins-Pitehford (J.Ind.Eyg. 9,109 - 1927) tells of Welsh miners who passed the physical examination for enlistment in the British Army, fought through the World War, then came back to England, and died of silicosis. Unfortunately, it is not stated whether these persons died from silicosis complicated with tubereulosis. Brit ton and Head (J.Am.Med.Assoc.96, 1926 - 1931) give more detailed descriptions of similar latent eases in the United States. Silicosis in General - It is generally agreed that silicosis may be defined as "A ohronie disease due to the breathing of air containing silica (Si02), characterised anatomically by generalised fibrotic changes and miliary nodules in both lungs, and clinically by shortness of breath, decreased chest expansion, lessened capacity for work, ab sence of fever, increased susceptibility to tuberculosis (some of all of which may be present), and by characteristic roentgenolo gical findings." In other words, silicosis is a disease of the lungs in which the normal lung tissue is replaced by scar tissue due to breathing air containing silica dust. Un fortunately there is no known cure for silicosis - but SILICOSIS and nearly all other forms of dust diseases CAL' BE PREVENTED. Recognizing the wide interest and even hysteria among apprehensive employers against whom claims had been filed by alarmed workers, and the necessity of thought ful consideration of the silicosis problem, the Secretary of Labor on April 14, 1936 called the First National Silicosis Conference attended by more than 300 persons representing workers, employers. State and Federal Agencies, Insurance companies, "nrf other interested groups. Fbur Canmit'tees were organized to study specific phases of the silicosis problem; and assemble the essential facts about silicosis in a series of reports; also to present specific suggestions for silicosis prevention and straighten out other difficulties that silicosis has created. Reports made by these Committees were formally adopted at a second conference held February 2nd and 3rd 1937 in Washington, from which we quote: t EM001495 -6- l fc "While a few persons may still be of the opinion that such workers" - (Workers haring silicosis) "are through* and doomed to an early death, every r study conducted thus far confirms the fact that the great majority' of these men will not necessarily progress from bad to worse. Perhaps it may be wise r to transfer same workers to other mployment, but many may be continued at their regular occupations if known methods are applied to control the dust R E and if special care is employed to prevent the development of tuberculosis, pneumonia and other lung complications". ' "Contrary to popular belief, silicosis is slow to develop. Usually it takes e seven years or more of exposure to silica dust for a worker to contract the disease. It is said that a few cases have been Imown to develop in as short e E a period as 1 -1 / 2 years, but these were under extreme and unusual conditions. On the other hand, many workers have labored under ordinary exposures no silica for mere than 30 years without demonstrating any trouble whatever that could be diagnosed as silicosis". r For the convenient diagnosis of silicosis or of silicosis complicated by' tu e berculosis, the pulmonary' changes are classified in three stages by Drinker & Hatch ("Industrial Dust" - 1926). In the first stage, the disease produces no ciability. t E The victim can work just as well as ever. In the second stage, his respiration is affected; he is bothered by dyspnea or labored breathing. In the third stage dys E pnea becomes severe and he is likely to contract pulmonary tuberculosis, generally witr. fatal results. Whether he contracts tuberculosis or not, the advanced sili- E cctic is far below normal and is very' susceptible to all respiratory diseases. E These three stages of silicosis can be distinguished by X-ray. A comparison of the X-ray plates of a silicotic with those of a normal person of like age and E physique shows, in the first stage, distinctive shadows, evenly distributed in both lungs. These may be missed or misinterpreted by' any but an expert; but the changes E in the second and third stages are obvious even to a layman. It is, of course, es sential that the X-ray plates be properly made. Dr. Pancost and Dr. Pendergrass of E the University of Pennsylvania have given extensive study to the influence of X-ray technique on the diagnosis of silicosis. Pendergrass is of the opinion that shadows E and appearances of fibrosis can be actually produced by the technique employed. Under other conditions, existing fibrosis can be entirely missed by' use of improper E technique. E Silicates as a class are by no means harmless. It was pointed out by Dr. R, P- Sayers (U.S. Public Health Bulletin 221) that Miners* Consumption was rather com E mon in the Broken Hill district of Australia where the rock contains considerable sillimanite (AI2 SiOs), fibrous silicate, and a rather low percentage of quarts (12. ?3^(). The studies of Badhan (Rept. Dir. Gen. Pub. Health, New South Wales) give con siderable support to W. R. Jones* (J.Eyg.15,307-1933) contention that silicates, C particularly the fibrous varieties, may well be the cause of pulmonary disability. Badhan in 1927 coined the word SILICATOSIS to cover disability from the inhalation C of silicates. Other silicates such as Talc (H2 Mg (Si0 3 ))4 ; Shale; Kaolin (H4 Air. Si2 Og)j Feldspar; Cryolite. (Na3 AlF$ ); and pure Mica give much less specific changes C than quarts. A moderate fibrosis may appear after exposure to numerous materials but this fibrosis is usually not disabling. According to Dr. Lanza, "Silicatosis" C is not a recognized term in this country aid disability from the inhalation of sili cates has not been proven. c Dr. Cary P. McCord (Ind. M ed. July 1933, pps.4-12) states that all silicates c taken into the lungs, of particle size capable of passing the cellular membranes, are likely to induce some fibrosis in excess of normal but the progress of such silica c tosis is not nearly so rapid as for silicosis. Tuberculosis rates are high in sili- ate us in oustries. Antecedent tuberculosis, quiescent, may flare up as a result E E ^0 01496 K -7- of exposure to silicate dust* Asbestosis - According to authorities cited by Drinker k Eatch in their book "Industrial Dusts", the pathology produced by asbestos is not like that of silicosis. Dr. L. U. Gardner of Saranac Lake is of the opinion that the asbestos fibers group about the neck of an alveolus and shut it off, causing what is known as "Atelectasis". There is no definite migration or transportation of the dust particles to the lymph nodes and no fibrous nodules. As the atelectatic areas increase the reduction in Inn*1 area causes serious dyspnea or laborered breathing. Dr. A. J. Lanza (U.S.Health Septs. , 50; 1 - 1935) suggests that the enlarged hearts noted frequently in his cases of second stage Asbestosis may be due to the increased load on the heart. It takes more work to pump blood through the fibrosed than through the normal lung. Re cent pathological studies from human lungs from eases of asbestosis hate indicated a diffuse type of interstitial fibrosis with a certain amount of emphysema. TV - `.-.HAT IS TKL' MAEIKTM PZHMISSABLL OUST CCHCZHTRATICI*? - There appears to be a wide variation in the maximum concentration of dust which might be inhaled without subsequent injury to workmen. Some dusts (as lead) are determined by chemical methods and the concentrations in air are recorded gratimetricallv as milligrams per cubic meter. However, the available information on the amount of lead cust that is harmful and the methods of determining lead are better and more accurate then those for silica cust. It is rather well agreed that an intake of about 1.5 milligrams of lead a day, whether this is acquired by breathing cust or by drinking weter that con tains lead, is the maximum allowable quantity. Others (as silica, where size is a factor in determining dangerous particles), are usually given by court, neither method tells the whole story, but in both eases it may be possible to secure the in formation necessary for the purpose. , The maximum silica dust concentration considered permissible in the air breath ed by a workman at any point in the normal breathing zone has not been definitely es tablished. There is considerable difference of opinion regarding the range of par ticles that are counted when using the Public Health Service technique and light field illumination. Eloomfield of the United States Public Health Servi.ee and Brown of the United States Bureau of Hines contend that they count particles from one mi cron and upward, or even 0.7 micron and upward. The Industrial Cannission of Wis consin and its Advisory Committee, composed of both employers end scientists, how ever, agreed in 1932 on a tentative figure of 15 million countable particles under 10 microns in longest dimension with free silica content of 35 per cent in a cubic foot of air as determined by United States Public Health Service technique. Varia tions in free silica content will make proportional inverse changes in this standard. In the case of practically pure silica, the permissible dust count should probably never exceed 5,000,000 countable particles. By countable particles is meant those particles between 0.5 to 10 microns in the longest dimension. Particles of this size are the ones that are believed to cause the greatest damage and form no visible cloud. Dust particles smaller than 0.5 microns in the longest dimension are not ordinarily countable. Dust particles larger than 10 microns in longest dimension do not ordinarily reach parts of the lung where they can produce injury of a respira tory nature. Most industrial dusts have but few particles above two or three mi crons in size. They are usually about 90 to 95 per cent, below two or three microns and 50 per cent, below about 0.5 to 0.7 microns. An exception to this would be a dust sample taken close to the point of generation of dust and before the larger particles had time to settle out of the air. In South Africa the figure is 1 milligram per cubic meter (or 300 particles per cubic centimeter, or approximately 6.5 million per cubic foot.) Dr. Lanza found in 1917 in the Joplin, Missouri district that with good engineering practice, a figure of 1 milligram per 100 liters of air could be attained. This value attribut ed to Lanza appears too high in comparison with the South African standards. As there EM001497 -8- # are 1,0C0 liters in & cubic meter, it would indicate that Lanza's estimation repre sents 'something of the order of 80 million particles per cubic foot. With good engineering practice, lower concentrations than this can be obtained. In fact the ex perience in South Africa and also the present experience in this country indicates that it can readily be kept below one-tenth of this value by using ordinary good practices. The United States Public Health Service in its recent study in the anthracite region of Pennsylvania, found that 50 million particles per cubic foot with 5 per cent, quartz in the coarse dust and 10 million particles per cubic foot with 35 per cent, quartz were apparently satisfactory and often were attained. The figure of 10 -2 0 million particles per cubic foot for granite dust with 35 per cent, quartz content is often quoted from the Vermont granite studies of the United States Public Health Service. From a consideration of general experience, Cummings suggests 5 million particles per cubic foot as a threshold for dusts high in quartz. This figure is based upon a combination of South Africa, Australian and American experience but lacks entirely any publisned aata in its support. According to studi.es quoted by Philip Drinker end Theodore Hatch in their book "industrial Dusts" 10 to 20 million particles per cubic foot by the impinger sampling method, light field counting is a reasonable figure for cement and limestone. Heeent work by Dreesser. confirms the universally accepted opinion that dusts high in calcite anc low in quartz do net produce disabling fibrosis. The threshold figure of C.15 milligram per cubic meter is given for lead dust, presumably litharge and vdiite lead. or other soluble lead salts. It should be noted that nan;/ of the data were not determined as the Medical requirement, but as being attainable in good practice and apparently satisfactory from & safety standpoint. It should be further noted that the accepted figures are only relative due to the indefinite powers of resistance of an individual which are an unknown quantity. One individual might resist a proportion of 200 particles per cubic centimeter, while another would react unfavorably to 50 particles. The work.er's physical condition prior to the exposure is of great importance, since a young, healthy individual usually can. stand & higher concentration or longer exposure before the first stage of silicosis is developed. However, far greater influence than physical condition might be the ability of the nose and respiratory passages to arrest dust. In their report to the National Silicosis Conference the Committee on Pre vention of Silicosis through Medical Control pointed out that since standards of safe atmospheric dust concentration, based on medical findings have been established for only a few industrial dusts, and in view of the fact that considerable study and in vestigation will be required to establish standards for other industrial dusts, some tentative standard would be useful. It was also stated that this arbitrary standard should be based upon what is believed to be within the limits of good engineering practice provided, it will largely control the silicosis hazard for most industrial exposures. They, therefore, suggest that "The maximum permissible concentration of silica in the air breathed might be expressed by the following formula. (Determinate on of dust concentration according to technique described by United States Public Health servioe in Reprint !!o. 1520 from Public Health Reports. March 18, 1932) Multiply the percentage of free silica by the total particle dust count. If the result is under 5 million, the condition may be con sidered permissible. If the result is over 5 million, the condition may be considered too high. For example, 10JZ free silica with an average total dust concentration of ___ 30 million particles per cubic foot would give .10 times E: & fZ Cl CZ Cl C tZ C Cl Cl C Cl Cl CZ CZ EMO 01498 -9- 50 million. which equals 3 Billion (good practioe)| 30#, with vnLf< -total dust eonoentration of 50 million, would equal ,3 times 50, or 15 million 9 (unsatisfactory), Thi* forgr.il" is not applicable to any dust containing less than 5# free silica." Theodore Hatch in his article "Same Fundamental Data on Mechanical Dust Traps" (Tech. Pub. Ho. 6 3 A. SO, Amer. Inst. Min. 4 Met. Engrs., Aug., 1935) gives these Safe Dust Cone entrt ions. Imninger Samplest (Light Field, Low Power Counts.) Hind of Iiiist Maximum Permissible Concentration Containing no Silica.'-.............. Containing any small amount of silica, free combined............... Containing 20 to 40 per cent. Free Silica ................... Greater than 40 per cent. Free Silica .................. . 50 millions per cubic foot . 30 " " " " ft V It It g II P II tt (Preferably as much less as possible) Dr. R. R. Sayers, Medical Officer in Charge, Industrial Hygiene and Sanitation, U.S. Public Health Service in answer to a question as to permissible dustiness writes: "During recent years, it has been customary to recommend threshold or permissible dust limits ranging ft*om five to ten million particles per cubic foot as determined by Public Health Service technique, especially with dust in which the percentage of free silica is above five per cent. There is no basis far the application of this criterion to all dusts, but it is generally considered a safe practice and one which can be attained in most industries by exhaust ventilation, wetting, or other methods of cust control." As pointed out by Drinker and Eatch ("Industrial Dust" - 1936) it is unfortu nately impossible to evaluate dust exposures with the arithmetical nicety that we should have liked yet it is commonly claimed - by laymen - that prolonged exposure to low concentrations is Just as serious as short exposures to heavy concentrations. This claim is oontrary to a fundamental law of physiology. In discussing the sub ject Clark and Drinker ("Industrial Medicine" - 1935) remark that ".... a sub-thres hold stimulus (dust inhalation) for a long time produces no reaction whereas a rela tively brief super-threshold stimulus may cause a reaction". If workers are exposed to sudden heavy concentrations, the threshold values suggested previously would be correspondingly lowered. However, most threshold values are weighed -- an average of the ranges. V - HOW MAY THE CONCENTRATION AND CHARACTER OF INDUSTRIAL DUSTS BE DETERMINED? The properties of a dust which determine its harmfulness have been shown, to be its composition, concentration (the quantity suspended in the industrial atmosphere), wri its particle site. The methods used for the determination of the concentration wd oharacter of industrial dusts vary from a routine dust count for the purpose of evaluating the efficiency of dust control methods to a detailed study of both the concent rati or. and the character of the dust in connection with medical and engineer .ing surveys. . EK)01499 -10- I fc PittsburTghoh EIxmpneirniemeerntAppSatraattiuosn bdyevGeeloorpgeed SatmitthheaUndnitLeeodnaSrtdateGsreeBnubrueragu, of(DMeisncersi,bed in e Reprint No. 1528 from the Public Health Reports Vol.47, No.12, March 18, 1932 pp. 654-675) has been employed for more than 13 years as a standard instrument for dust wshteudrieest.he dIunstthipsartaipcplaersatuasresatmhprloewsn oorf iamiprinagreeddroanwan pirnetpoaraend iwmeptitnegdergtluasbse acnodllefcltask c idnugratpliaotne.of tThhee rsaatmpelionfgaiprerifoldowisisdfeipxeenddenatt uopnoen ctuhbeicdufsototcopnecrenmtirnauttieonw.hilTehe thaeir n lpeacstsiensgtphlraotueghwhainchoriisfiscuebmienrgtehde biontt3ocmm.ofdtehpethiomfpindgiesrtitlulebde waantderstrorikessomeglaostshercol B= fluid with satis factor}* wetting properties, (if water is used as the fluid in the impinger, silica particles are dissolved-- hence not available for counting -- unless the laborator}.- (counting) work is done within a few hours of taking the sample. ) This affords the means for accurately determining the quantity and size of the par ticles. The liquid is then thoroughly shaken to obtain a uniform distribution of the particles} filtered to remove those over 40 microns in size and again agitated. K wSiacmpkl-eRsaftoefrapcporuonxtiinmgatecellyls1. cc.Theareusetaokfenabsyumietaanbsle omficaropsicpoepteteeaqnudipppeldacweidthinaSWeahgi-pple e micrometer disc to aid in counting, will permit the determination of the number of particles in one quarter of the microscopic field. From this figure, the number of i= particles of dust in 1 cu. ft. can be calculated. One special advantage of this ap paratus is the fact that analysis of the sample can be determined by counting, by weighing or by chemical analysis. The impinger method is neither simple nor extreme ly complex; however, reliable results can be obtained only by well trained, compe tent and experienced investigators. However, owing to the wide use of the impinger in previous investigations that have been correlated with the pathological findings, an impinger should be used for an}* investigation which is to include pathological findings or where the results are to be introduced as evidence in court. Same state codes or. dust control recognize the impinger method. The United States Bureau of Mines has practically completed the development of a "Midget" impinger which has most of the good characteristics of the impinger but lacks most of its drawbacks. This midget impinger will soon be available and will greatly simplify both sampling oounting. Other devices are also available for sampling of dust over a continuous period, namely, the electric precipitator, the paper thimble, the electrostatic precipitator, and the hot wire thermal precipitator. The English are working on a dust sampling instrument which precipitates the dust from the air by thermal means ("Physical Methods for the Estimation of the Dust Hazards in Industry", by H. L. Green and E. E. Watson, Privy Council, Medical Research Council, Special Series No. 199, His Majesty's Stationery Office, London, (1935)). The U.S. Bureau of Mines has been us ing an electric precipitator similar to those described by Drinker ("Alternating Current Precipitator for Sanitary Air Analysis; I - An Inexpensive Precipitator Unit" by P. Drinker, Jour. Ind. Hyg., Vol. 14, 1932, p. 364) for collecting samples of the test suspensions used in testing mechanical filter respirators for permissibility. A number of instruments are available for makirg dust determinations for con trol purposes. Among these is the Konimeter which calls for but little skill in sampling. It is light, simple and quick to handle, needs no power for operation and requires only a microscope for counting the particles. The Zeiss Konimeter consists of a microscope which gives a magnification of 200X, an air pump, a dust filter to remove very coarse dust particles, a sample disc and a micrometer ruled in square millimeters. The air pump drives a measured quantity of air against the sample disc which is covered with a sticky substance (glycerine jelly). This sample forms a dust spot which can be examined under the microscope for a general idea of the nature of the dust and the relative quantities present, or for an actual measure, a "dust count", which shows how many dust particles are present in one cubic centimeter or in one -"vtre of the air samples examined. The Konimeter has been used very widely in E HO0150 0 -11- South Africa (Final Report of the Miners* Phthisis Prevention Committee, Johannes burg 1919, p.10) and also in Canada. The U.S. Bureau of Nines has also used it in seme o-^its dust studies. In discussing the value of the Konimeter in their recent boole "Industrial Dust" (McGraw-Hill Book Co.. New York and London - 1936) Philip Drinker and Theodore Hatch of the Harvard School of Public Health writes "It is the most compact and simple sampling device. Space is provided for thirty senple6 on a single disc and no auxiliary source of power is required for its operation. C-rab senples car be collected with speed and the fluctuations in dustiness and the development of dust floods can be revealed in a way that is impossible with more cumbersome apparatus. South African experience involving the collection of thousands of samples has shown that the figure cf merit given by the Koni meter is directly related to the amount of phthisis - produc ing dust in,.the air. It is a valuable routine sampling in strument but because of its low and selective efficiency, the counts reported are probably considerably below the true level anc they are not easily compared with data obtained in England, for example, with the Owens apparatus, or in the United States with the impinger." Experience has shown that contrary to Drinker's statement, the Konimeter if properly used, will give results that agree very well with those obtained by the use of tr.e Impinger. The U.S. Eureau of Mines Experiment Station at Pittsburgh in making some comparative studies with the Konimeter and the Impinger found that an average of five Konimeter determinations was within about two per cent, of one impinger determi nation. The reason for taking an average of individual results obtained by the Koni meter, for comparison with those of the Impinger, is due to the fact that the- Koni meter takes an instantaneous grab sample of small volumes and owing to the hetrogeneous nature of dust in air grab samples do not represent the average conditions. The Impinger takes a continuous sample of rather large volumes and is thereby representa tive of the average. For these reasons, if it is desired to compare Eonimeter re sults with Impinger results it is necessary to take several Konimeter samples during the course of the Impinger sample, in order to obtain average conditions. We have no correlating information of the Konimeter with the 20 to 30 micron porcelain filter against the standard impinger method. A Zeiss Eonimeter, using a 20 to 30 micron porcelain filter was used in making actual dust counts in our various dust producing operations. The particle size and size classification was estimated rather than accurately measured and computed. Only particles ten microns or less in size were counted since it is generally agreed that dust particles larger than ten microns in size are not particularly pathogenic. Other methods in common use are the Owens jet dust sampler ("Jet Dust Counting Apparatus" by J.S. Owens, Jour. Ind. Hyg. ,Vol. 14,1932,P.522), which has recently been manufactured in this country and the photographic du6t counter, developed by Fieklen and Ott. The Owens jet dust counter is used in this country to collect samples for particle size distribution determinations. It is used principally in Australia for determination of number concentration of atmospheric dust of industrial hygienic im portance. The latest device for determining dust concentrations is the Bausch & Lamb Dust Counter which was placed on the market a few months ago. This instrument con sists of a dark-field microscope magnifying 200X, and an impinging apparatus mounted on a common base. The base is a hollow chamber with the bottom hinged to provide easy access to the dark field condenser and a circular glass specimen slide. Bymeans of a hand pump, which is part of the impinging device, a sample of air is drawn EM001501 -12- through a moistening chamber which has at its lower end a narrow slit. The dust is deposited through this slit on to the circular specimen slide in the fora of a ribbon. The slide can be rotated until the sample comes into proper position for viewing with the microscope, or a maximum of twelve samples can be collected on the slide and then viewed. The slides are quickly removable and replaceable. This dust counter is not designed for accurate dust deterr.ination but rather as an inexpensive device for roughly checking dust conditions. It has not been available long enough for a thorough test in actual practice. The principal objection to instruments like the Bausch & Lamb Dust Counter ana the Owens jet dust sampler far determining ntsber concentration is that their dust collecting efficiency decreases with an increase in the atmospheric dust concentretion and the fact that they take grab samples. Since the major portion of dust present in industrial atmospheres is small enough to gain entrance to the lungs, very little attention need be given to determina tions of the exact sises of particles. i c ItZ G G G EH KH 1= t= G C e C C G E ro Cl 502 -15- PART n - DUST PRODUCING OPERATIONS STUDIED V5JLT ARE TEZ rSINCI-PAL DIBT tCDUCING OPERATIONS? - la order to determine to what extent if-asy, workers In the production of petroleum products and associated actirities are exposed to the hatard of breathing dust, a survey of all dust proauc ing operations was made at the various plants concerned. These operations, listed in order of their apparent degree of dustiness, ares I - SAND BLASTING Due to the large amount of finely divided silica dust produced by the impact of the rrains of sand on the surface of the object being cleaned, sand-blasting is the c o s t dangerous silicosis haxard encountered in our surrey. Sand-blasting is used rather -extensively at oil refineries for cleaning inside soaking cnzzs, bubble towers, tar separators, run-down pans and storage tanks for metal inspection and to permit the application of gunite lining as a means of preventing corrosion. Seader boxes or other similar parts, tubes in cracking coil fire boxes anc return bends are sand-blasted to permit a detailed anc thorough examination for cracks and de fects. Sand-blasting is also employed in the removal of corrosion fron under float ing roof tanks; for removing roughness or rust from steel shapes or rods; for clean ing bell caps, bubble plates, trays, and pipe prior to putting them back in service; also on the ends of tubes preparatory' to placing them for rolling; and for cleaning castings which are too large or fragile to withstand being tumbled. It has been used, to a limited extent for cleaning buildings and rendering window glass opaque. The cracking coil tubes, pipe, bell caps, trays, header-boxes and similar ob jects are usually sandblasted out-doors in the open air or in a more or less open shed, both locations being vs far removed as feasible from any shops, process units - or other working places. Coarse river sand is discharged through a one-half tothreeouarter inch nozzle with compressed air under a pressure of 30 to 90 pounds per square inch. The men at the nozzles stand to the windward side of their work and wear a "Healthguard" (Chicago Eye Shield Company) mask, a Sly Sand Blast Helmet or & Presh Air Hose Mask covered with a canvas hood. The men at the Sand 5last Machines wear "Dust Safe" goggles and a K. S.A. "Comfo" Respirator. The Mine Safety Appliances Company now has a sand-blast hood that is meeting with considerable approval by in dustry and also by the United States Navy Department. A blower is available for supplying air to these hoods that cleans the air. This same blower can be used in connection with air-line respirators. When send-blasting is done inside of drvzzs having more than one opening, such as soaking drums, an air siphon is placed in the lower manhole which draws out the dust and allows a continuous circulation of fresh air through the drum. In drums where the siphon cannot be used, the air circulation is poor and the men work in shifts ranging from 30 minutes to an hour, depending on the size of the drum and the amount of air circulation inside. They also wear an approved sand-blast helmet. These sand-blasting jobs are not continuous routine operations but are per formed when necessary by men selected from the Common Labor gangs or the Mason's De partment. The work is rotated so that in most cases it occupies less than twenty per cent, of the worker's time and there is an interval of 15 to 20 days between sand-blasting jobs. Consequently, on the average, no one man is exposed to more than a combined total of 400 hours during the course of a year. In discussing rotation of men on sand-blasting jobs. Dr. C-ehrmann, Medical Director of the du Pont Company wrote: "It must be borne mind that silicosis is a cumulative disease and, erefore, the rotettc: of men in this type of^work cannot be considered M0 01 503 -14- l ft as entirely prevent ire. Assuming that a nan works in ar. atmosphere of sil ica dust for several months, during whichtime he is bound to absorb a cer ft tain anount of the dust itfiich produces permanent damage in his lungs; he is then removed and the possibilities are that the damage which is already ft done will be sufficient to continue on and progress to the point where in later years he will develop symptoms. ft "Therefore, if we take to rotating men in this type cf work we are K facing the possibility of, in later years, developing a large number of cases of a moderate silicosis with some permanent disability. The only t safe expedient which can be used is complete prevention and this can only be done by eliminating the dust." r During our survey we found that men engaged in sand-blasting, that is handling c the nozzle or attending the sand-blast machine, were more or less properly protected while actually doing the work but often times they removed their protective equips t ment before getting completely away from the working area. t A large amount of very small particles is produced by sand-blasting. In an analysis of dust samples collected both outdoors and indoors during sand-blasting, E the following distribution (Public Health Bulletin No. 217 - p.52) on a size fre quency basis was foundt t Size Group in Microns Per Cent of Total c 0.00 - 0.49.......................... 1.4 0. 50 - 0.99........... '.............. 1.00 - 1.49.......................... 19.7 34.7 c 1. 50 - 1. 99........................... 2.00 - 2.49.......................... 20. 3 12.6 c 2.50 - 2. 99.......................... 5.2 3.00 - '3.49........................... 2. 8 c 3. 50 - 3. 99.......................... 1.6 4.00 - 4.49.......................... 1.1 c 4. 50 - 4. 99........................... 0. 2 5.00 - 5.49.......................... 0.2 c 5. 50 - 5. 99........................... 0. 2 c While it has been estimated that free silica dust particles, 1 micron in diameter, re quire 8 hours to fall 6 ft. in still air; particles 5 microns in diameter require c less than 1 hour to fall the same distance. Considering this fact, it is apparent that the dust hazard from a particular operation may, even though carried out for c short periods, be acute throughout the working day. In view of the fact that the con dition of still air is rarely, if ever achieved, and that dangerous particles exist c ir. sizes below one micron, it is evident that a hazard exists. c Fortunately most of the outside sand-blasting is done in more or less isolated locations which makes it rather improbable that there will be any unsafe silica dust c exposure to other workmen. However, should it become necessary for any work to be done in the vicinity of sand-blasting operations either on process units or the sand c blast sheds or yards, it should be remembered that there may be silica dust in the air even though it can not be seen. Dust counts as high as 5,344,160 particles ten c microns or less per cubic foot were found in samples taken about 50 feet "downwind" (wind blowing about 15 to 20 miles per hour) while sand-blasting cracking coil tubes; c about 95^ of these dust particles appeared angular crystalline under the Konimeter microscope and were about five microns or less in size. Samples taken about 100 feet c "downwind" from sand-blasting operation had counts as high as 1,812,480 particles per 'uhic foot. ic p EK001504 I -15- I Dust counts as high as 13,933,440 and as l w as 453,120 particles per eutic foot were found in samples taken during the filling of the Sand Blast Machine feed hoppers. The high counts were found when sand was shovelled into a snail circular screen and shaken by hand, the lower counts, when the sand was simply shovelled in to the hopntr. The average dust produced by filling or charging the Sand-Blasting I Machines v.ks 4,950,316 particles, ten micrcns or less, per cubic foot. I Dust counts as high as 4,954,320 particles, ten microns or less, were found in samples taken inside a Sand-Blasting Room while cleaning eastings. The average exist I in this room during sand-blasting was 3,873,625 particles per cubic foot. About 80$ B of these particles were angular crystalline three microns or less in site and about 2CCZ apneared rounded, quarts-like crystals about ten microns in site. There were a few rust-like scales over ter. microns in site and a very large number of minute dark f metallic particles too small to be counted accurately. The dustiness of this opera m tier. could be greatly reduced by the use of steel abrasives exclusively. ma All of the samples for dust counts referred to above were taken at face level in the vicar.it-/ of workmen, a 6 ,000,000 cus- particles per cubic foot is the tentative maximum allowable t-*jt- of dust particles containing free silica of a site less than 10 microns recom a mended for sand-blasting. i II FILTERING OPERATIONS i The process of filtering is extensively used in the refining of petroleum i products to improve the color stability,and to remove impurities from motor lubri cants anc paraffine waxes. The three materials most commonly used for this purpose are Filter Clay or Fullers Earth, Contact Clay and Bone Black. Considerable dust is produced by the handling, charging and reconditioning of these materials. A - FILTER CLAY CP. FULLERS EARTH: What is Filter Clay or Full ers Earth? Filter clay cannct be identified from chemical composition but consists of silica, alumina, iron and alkaline earths in varying percentages. The distinguishing properties are lack of plasticity and the power to remove color from oils. There are numerous deposits of this clay and other filtering earths in the United States; the oldest and among the most extensive are those found clcse to the Florida-Georgia line. One of these, at Attapulgus, Georgia, supplies a major portion of the clay used by the affiliated Standard Oil Company (hew Jersey) organizations. At the mine this material contains on an average approxi mately 32$ silica and 45$ moisture. The average composition after being processed and prepared for shipment is approximately? Si0.......................... A l 20j ......................... Fe203......................... MgO........................... Combined Moisture............ Free Moisture................. 67.46 per cent 10.08 " " 2.49 " " 4.09 " " 5.61 n " 6.28 " " The comparatively low dust counts found even in places where there was cleaning and sweeping is no doubt due to the fact that this filter clay is of a rather coarse na ture and without appreciable amount of fines. tent _used There appears to be a of filter clays used in ir. Poland shows: wide variation in the European refineries. composition "Tcrrana" a I and free silica con German Filter clay E PO 01505 -16- Loss in calcination. Free Silica (Si02).. AI2O3 and F203. .... 6.05 per cent 83.27 " n 8.27 " n The filter clay used in Roumaxia is reported as haring 60.4 per cent, free silica or 7 5 . total silicates. "Granosil" clay used in Belgium contains fi total percentage of 73-1/2 per cent, of silicates expressed as SiO. The percentage of free silica was not determined. How is Filter Clay Mined and Prepared? - The deposit varies from 2 to 12 feet in thickness, probably averaging about 7 feet. There is an overburden of about 35 feet which is removed byanelectrically operateddrag line or a steam shovel. The clay isloaded intosmall cars, transported to the wet clay shed where it isdumped on to the crying floor and dried for three days. It is then picked up by orange peel buckets, loaded into portable distributors and delivered to belt conveyors which dis charge the earth into roller crushers where it is reduced to sizes up to a naxirmi of two inches. From these crushers the clay goes to secondary crushers where it is re duced to a maximum of one inch. Since the clay is more or less damp very little dust is produced. The clay is then transferred to tandem oil-fired rotary dryers, 50 to 60 feet long six to seven feet in diameter. In the 20 minutes required for the clay to pass through the dryers the volatile and moisture content is reduced 40 to 50 per cent, to a maximum of 15 per cent. The average dust ten microns or less in size in samples taken at various points around the dryers and conveyors was 1,564,969 particles per cubic foot. This rather low dust count is the result of the installation of hoods with ducts to exhaust fans placed over the discharge points to the conveyors or elevators. About B5% of these dust particles were angular crystal line -ir. appearance under the Konimeter microscope and about five microns or less in size; about 15% were over ten microns in size. The larger particles had rough edges and appeared to contain several small air bubbles. The clay is removed from the dryers to hot rock cooling tanks, then to a vibrating screen. The oversize is next pulverized in a roller mill and the product conveyed to a sifter. An exhaust system for the mills and elevators has been installed. This process may be repeated until the desired size material has been obtained and graded to standard mesh sizes, the better known of which are 15-30, 30-60, 60-90, and the 200 mesh. The 60-90 grade is probably the most cozmonly used in the petroleum industi*y when decoloring by percola tion, and the 200 when contacting. However, the 50-60 is preferred by most of our refining units in the United States. The size selected is apparently determined largely by the type of reburning equipment. Screen tests are made hourly to insure that the sizes are within the specifi cations. Here are two typical screen analyses 30 - 60 GRADE FILTER CLAY Mesh Per Cent. Over 30 .............. 30 - 40............. 40 - 60............. 60 - 82............. Thru 8 2 .............. ............ 40.3 Total 100.0 1 EMO 0150 6 -17- FIFES (100 - up) GRADE FILTER CLAY Mesh Per Cent. Over 9 7 ............................ 97 - 157.......................... 157 - 200.......................... Thru 200............................ 0.6 22. 7 8.0 68.7 Total 100.0 There is very little dust produced by the sifting operation. All of the con nections are designed to be dust tight but there is some leakage. Samples of air taken et various points around the sifters while in operation had an average cf 2.208,960 dust particles less than ten microns per cubic foot. About 85# of these dust particles were slightly angular crystalline in appearance and five microns or less in size; about 1 5 # were slightly rouided semi-opaque ten microns or over in size. The larger particles had small cracks or fissures and several small air bubbles. lien spend about two hours a day cleaning, repairing or replacing silk screens ir. the sifters. Samples taken during this operation contained an average of 2,039,040 dust particles less than ten microns per cubic foot. About 97# of these dust particles were angular crystalline in appearance and five microns or less in size; about 3# were opaque over five microns in size. After being sifted and graded the clay is ready for shipment. The 30-60 mesh grade is nlaced in burlap bags holding,128 pounds and loaded into railroad box cars; about 400 bags to a car on an average. Dust counts of samples taken during the fill ing of the bags with the 30-60 mesh grade show that there are from 7,589,760 to 9,968,640 dust particles less than ten microns per cubic foot which indicates that all men engaged in bagging and handling bags in this area should wear approved respi rators' such as the "K. S.A. Ccanfo". About 80# of the dust particles in samples taken during the filling and handling of the bags appear slightly angular crystalline under the microscope and are five microns or less in size; 20# are rounded crystalline, ten microns or over in size. Bulk Loading of railroad box cars with the 30-60 mesh grade produces clouds of dust, but a major portion of this dust is apparently larger than 30 microns in size as samples taken during this bulk loading had an average of only 6,853,440 particles, ten micrcns or less in size per cubic foot. The Fines (100-up) grade is put into 128-pound cotton bags. Dust counts in samples taken during this operation showed that there were from 4,644,480 tol4,216,640 dust particles less than ten microns per cubic foot in the air being breathed by the fillers, weighers, sewers and truckers. About 80# of these particles were rounded, semi-opaque crystalline in appearance under the Konimeter microscope and five microns or less in size; 20# were semi-opaque crystalline from about 6even to fifteen microns in size. There were also a large number of very small particles about one micron or less in size. How is Filter Clay Used? - Upon arrival at the refinery, the bags of clay are removed from the box cars by a crew of men usually from the General Labor Department; the job being rotated so that the same men do not do this particular operation more than perhaps twelve hours twice a year on an average. Goggles and "M.S.A. Comf o" respirators are generally provided. The clay is either trucked or dragged to an elevator or conveyor hopper and dimped and the bags are piled for storage. At points wr.ere the clay is receiver in bulk, it is unloaded by a large wooden scoop pulled by .a motor driver, crag-line. Unloading, handling, and dumping the clay is one of the E MO 0150 7 -18- * dustiest parts of the filtering operation. The amount of dust produced is of course dependent on how the work is done, the ventilation provided, and the care used by the men doing the job. Here are some average dust counts of particles less than ten microns in samples taken during the unloading of bags of 30-- 60 mesh Attapulgus clay Particles Per Cubic Foot Unloading and dumping bags (128 lbs.) into Eopper at a Southern Refinery............... Ihrzping clay from Bags into Elevator Hopper at a Northern Refinery.............. . Handling bags from Storage and Dumping into Elevator Eopper at another Northern Refinery..... Inside Box Car During Unloading............................. Outside " " " " ............................. In Filter House Passageway being used to Truck Clay to Elevator hopper.................. Average Dust Produced while sweeping up Inside car after unloading........................ 5,403,456 2,237,230 755,150 1,110,144 372,924 339,840 651,360 Apparently unloading clay in the bulk is less dusty than handling and dumping of the clay in bags. Samples taken during the unloading of bulk clay gave these average counts of dust under ten microns in size: Inside car during unloading.......... ........... 962,880 particles per cubic foot Outside " " " ...................... 623,040 " " " " here is of course more dust produced in the vicinity of bulk unloading than is pro ceed when handling anc dumping clay in bags. After dumping, the new clay is taken by elevators and conveyors to storage tins which hold about 20 tons each. This is also a dusty operation due to the failure to cover the storage bins or to place hoods over the junction points of elevators belt conveyors. Samples taken during the filling of storage bins with new clay had these average dust counts of particles less than 10 microns in size: Dust " " n over " " Face Eins around elevators and conveyors during filling at aNorthern Refinery.......... " 4 Conveyors while filling at another Northern Refinery................. " 4 Conveyors while filling at a Southern Refinery................................... Level on Walkway over Storage Bins Northern Refinery while Filling Bin......................... 1,910,432 4,275,842 4,531,200 2,307,776 Dust Counts as high as 8,609,280 particles per cubic foot were found in samples taken near the discharge of one belt conveyor into the top of a storage bin. About 90/i of these dust particles appeared angular crystalline under the Konimeter microscope and were five microns or less in size; about 1 0 were black, opaque, many scale-like in appearance and ten microns or over in size, "BURNING" CLAY - From the storage bins the clay is conducted by chutes and/or conveyors and elevators to gas or oil fired Wedge Burners or Rotary Burners or Kilns in which it is "burned" or roasted, and then discharged into rotary coolers where it _is cooled. Where all openings, chutes and elevator outlets as well as the ends of tary coolers are properly enclosed and an exhaust duct is placed over the burner, ry little dust (an average of only 604,160 particles, ten microns or less in size E HO 0 1 50 8 I C > C fZ fZ E E E E EZ EZ E E E E E G C C C C C C c -19- per cubic foot) is produced and no respiratory protection is necessary. Three types of burners or kilns are used to recondition filter clay. Average dust counts of samples taken during the operation of these burners give a comparison of the amount of dust (particles ten microns or less per cubic foot) produced by each: Type of Furnace Feeding About Furnace Coolers Total General Average Herman-Frasch Oil or Gas Firec........ Wedge Gas Fired......... Rotary " " 2,624,320.. .. 5,399,680.. .. 2,067,360.. .. 3,700,480.... 2,732,8S0.... 1,522,459.... 2,108,590.... 1,070,046.... 3,115,200.... 2,990,542 2,395,971 1,518,206 The present practice of using a compressed air hose to clean up the clay on the various floors of the Furnace House at one of nhe Refineries is particularly ob jectionable due to the excessive dust (12,6S7,360 particles ten microns or less per cubic foot) which is stirred up. About 9C of the dust particles in samples taken during the burning of filter clay were angular transparent crystalline in appearance and five nicrcr.s or less in size; 5^ were round opaque, ten microns or over and 5% were rounded semi-opaque, ten microns or over in size. Exposure to dust produced by burning or reconditioning clay is rather Usually there is one fireman for each shift of eight hours, three shifts per and a porter for the day shift only. Since one of the porter's main jobs is "clean-up" he is exposed more continuously to dust than are the firemen. limited. 24 hours to CHARGING FILTERS - The cooled, burned clay (30-60 grade) is conveyed to the filters by means of elevators and belt conveyors and charged through chutes fhcm the conveyor belt tripper at a rate of from one and a quarter to eight tons per hour. These vessels'hold from seven to fifty tons each. The amount of dust produced during the charging operation depends upon the grade of clay being handled, t h e `rate of charging, the position of the clay on the conveyor belt, the condition of the convey or belt, tripper and charging chute; also whether the top manhole of the filter is left open during the filling. A general average of 54 dust counts made of samples taken during the charging of filters at all of our plants using 30-60 mesh Attapulgus Filter Clay was 3,717,884 particles ten microns or less in size per cubic foot. The amount of dust produced by the charging operation varies considerably at the various plants as is shown by these averages: Refinery Baton Rouge Bayway Bayonne Eagle Works Chareinc Rate 8 tons per hour 1-1/4 " n tt 3-1/2 " n 6 "n n Particles oer cubic foot 4,271.413 2,435,520 2,242,944 1,042,976 It is the general belief that the more times a clay has been used and reconditioned, the less dust is produced during its handling. Our study does not confirm this be lief as applicable to dust produced while charging filters. Averages of dust counts in samples taken during this operation were: # 1 Clay.................. # 3 " .................. 10 n .................. 2,242,944 particles per cubic foot 4,604,832 " " " " 3,896,832 " " " " i EMO 0150 9 -20- According to an analysis of particle site made by the Bayonne Laboratory of a sanple of Raw (30-60 grade Attapulgus Clay) No. 1, No. 3, and No. 8 Wedge clays, the 'ollowing is the size classification or distribution: Raw Clay # 1 .Clay #3 Clay Clay Coarser than 100 mesh 98. 55?........ . 99.45?....... Diameter of Particles Millimeters Mic rons Raw Clay Per Cent #3 Clay Per Cent #8 Clay Per Cent . 149 .074 .044 .035 .025 .015 .005 to .074 " .044 " .035 " .025 " .015 " .005 " .001 149 to 74 74 n 44 44 it 35 35 n 25 25 t! 15 15 n 5 5 t! 1 0.14355 0. 55095 C. 2S760 0.21555 0. 17550 0.11640 0. 00045 1. 00750 0.17166 0. 05369 0.03887 0. 01729 0.01027 0. 00052 0. 54159 0. 08449 0. 04585 0. 01603 0. 00647 0. 00336 0.00021 About S5>? of the dust particles in serples taken during the charging of #3 clay were slightly angular in appearance and fire microns or less in sire; 155? were rounded seni-opaque, ten microns or over in size. About 755? of the particles in samples taken curing the charging of IC clay were slightly angular crystalline, five microns or less in size; about 205? were over ten microns in size and were seni-ocacue about 55? were round sen:-opaque between five and ten microns in size. All of the larger particles appear to contain small bubbles. There are numerous small black specks about one-quarter micron in size. Charging of filters is usually done by one man per shift for each filter house. There are three shifts a day. These men have an average service of about 20 years and work eight hours a shift, nine shifts out of fourteen. Ventilation is provided in the newer filter houses by eighteen-inch roof ven tilators extending about twelve inches above the roof and also by windows which ooeupy about 805? of the wall space in front of the top of the filters. D'JIIFIMC FILTERS - After the filters are charged with clay they are plated up and the oil is allowed to percolate through the clay for several hours, the length of time depending upon the nature of the oil run and the "yield" of the clay. The oil is all drained off and the clay is then washed with naphtha or "Varsol" and steamed to remove all trace of the naphtha. After this the filter is dumped on to a canvas belt conveyor and the clay returned to the kiln for burning or reconditioning. Filter clay is used as many as fourteen times before it is finally discarded. In order to determine what effect the reconditioning of filter clay had on its free silica con tent samples were analyzed by the New York State Department of Labor, Division of In dustrial Hygiene with this result: Times Burned 5? Free Silica Raw Clay..... Once......... Three........ Eight........ . 6.30 . 8.50 . 9.20 . 9.30 Considerable steam is usually given off curing the dumping which probably e ^o o i s i o l E K n IE !f= lz in c c c c I n I c c 1C c 1C 1C ic tc c c ic c _ j explains the smaller dust count (a general average of only 2,518,781 particles ten microns or less in sire per cubic foot) than would be expected. The dustiest part of the filter dumping operation is sweeping up the floor under the filters after dump ing is completed. Samples taken during this sweeping or cleaning up had as high as 16,638,880 particles per cubic foot, although the general average of samples taken during dumping at the various refineries was 2,514,816 particles per cubic foot. About 95?J of these dust particles are slightly angular crystalline in appearance under the Eonimeter microscope and are above five microns or less in size; about 5# are rounded semi-opaque over five microns in size. Occasionally the clay doesn't 'Ylow" when the filter is opened and must be started "flowing" by means of an iron bar. This action causes some dust (2,668,640 particles per cubic foot) but not as much as pounding the bottom nH lower sides with a sledge (4,248,000 particles per cubic foot) as is some times done. After the clay has run out, the inside of the filter is swept out with a broom which produces a little dust (an average of 792,960 particles per cubic foot). The filter is then plated up anc is ready for recharging. The work of dumping filters is done by one man per shift, for each filter house. These men have an average service of about ten years and work eight hours a shift, nine shifts out of fourteen. They are exposed to dust less than 60 per cent, of their working time. Spent clay is used to a limited extent for packing around valves anc fire hy drants to prevent freezing; also for certain other small absorbing jot such as on the warehouse floors of same of the larger bulk sales plants where lubricating oils are transferred from barrels or drums to smaller containers, or loaded into five gallon cans from bulk. Most of the spent clay is disposed of, however, by dumping it on nearby Company property and, to a lesser extent on railroad property' near river banks. Composition of Filter House Air Borne Dust; Samples of dust from Attapulgus Clay, which had settled on the tops of elevator housings and on girders over the storage bins in filter houses, were submitted to the United States Bureau of Mines Ex periment Station for petrographic examination. Ordinarily positive results are not obtained in petrographic tests for the identification of minerals in atmospheric dust. However, the samples submitted were coarse enough to give results in most cases. In studying the results of the petrographic examinations it should be borne in mind that the samples submitted were settled dust, and that they are not representative of the composition of the dust that would be breathed generally owing to the differential settling rates and the ease with which the various mineral constituents can be crush ed to a powder. "Montmorillonite" ((Mg, Ca) 0. Al2 O3. 5Si 02. nH20 -- n - 5to8) is the miner al that is characteristic of many types of fullers earth. Hot all of the less im portant minerals found were fully identified. Clay dust from top shell of elevator - Top #2, Herman-Frasch Furnace. Quartz - 10# Montmorillonite - 80# Calcite, Microcline and Unidentified - 10# Dust from accumulation on girder over clav storage bins - *4 Filter House. Quartz - 10# Montmorillonite - 70# Possibly other clay minerals present, opaque - 20# Dust from accumulation on girder over clay storage bins - #1 Filter House. Quartz - Over 1# Opaque - 40# Montmorillonite - 55# Unidentified - 5# l -22- E Control of Filter Clay Dust: Dust in a filter plants results principally from the operation of the clay handling machinery. The condition is aggravated by the C present practice at some refineries by using an air hose to blow accumulated dust and spilled clay from equipment, walls and floors. Handling a fine light dust producing material, such as filter clay, in a system which includes open belt conveyors is in herently a dusty operation. (12,687,360 particles, ten microns or less in site, per -- cubic foot). It is difficult to prevent some dust ft-cn being generated at unloading points where the clay falls into chutes or bins, but it can and should be controlled tZ by meansTheorfe hwoioldsl, alewnacylsosbueresa,n ainrrdedaudceiqbulaetemienxihmauumstofsyssptielmlsagweitahndefdfuescttivseettdlusetmenctollec wtohresr.ever dust;.- material is handled in systems such as exist in most refinery filter houses. This is an economic waste and increases the difficulty of the dust control t"z ereclem. Unless the present practice of cleaning cust spillage by blowing with campressed air is changed,-the necessary periodic cleaning will continue to be a very tz dusty ar.d umhealthful operation even though all precautions have been taken to pre vent the escape of dust from clay handling equipment. A modern industrial vacuum tz cleaning system would do the job efficiently, without creating any dust. tz The principal source of dust in filter buildings is the belt conveyor which is usually located at the top of the building. Gusts of wind from the monitor blow the clay and cust from the belt. A certain amount of dust is also generated by clay fall ing into the tripper chute (6,060,480 particles per cubic foot) and discharging from the tripper chute into the chute leading to the various filters (7,306,560 particles per cubic foot). This could be considerably reduced by inserting canvas or sheet iron connections between the ends of the tripper chutes anc the chutes to the filters, and by using a properly designed belt tripper on the conveyer belt. Sins for the storage of filter clay should be closed with steel decks having the smallest possible openings in the form of chutes to receive clay from the convey ers. If care were taken not to overflow the bins, the dust and spillage could be greatly reduced. For complete control of dust, an exhaust system equipped with dust collector, fan, ducts and hoods should be installed to remove dust from the points of origin, such as, all unloading points (except movable trippers) of each belt conveyer in the building, new clay bins and burned clay bins. One estimate which has been prepared cz for such an installation calls for an exhaust system with a capacity of approximately 15,000 cubic feet of cust laden air per minute, and is based on maintaining an inward c flow of air at openings into hoods and bins at a recomended velocity of 200 feet or more per minute. In considering dust collectors, it should be borne in mind that the c cyclone type will not remove the fine dust particles (ten microns or less in sire) which are most injurious to health, and that the cloth bag type filter has been proven to be more successful in removing these fine particles. Under existing conditions at most plants it is almost impossible to keep -the plants clean, regardless of how carefully the equipment is operated. However, the in stallation of a vacuum system and adequate dust collectors should encourage operators to exercise more care in the operation of equipment and thus cut down the amount of c dust and spillage. . B - COITTACT CLAY: Most contact clays, particularly in the United States, are acid treated "Ben tonite". Bentonite is a non-refractory clay, a double silicate of iron and aluminum, Q ..derived from the shale of the Fort Benton formation in the upper Missouri valley. t EM001512 -24- agitated with air and steam. It is then dumped into thickeners, washed, and deliver ed to an Oliver filter. From there it goes in turn to a pug mill, drying tower, oage and imp mill, and classifier. The finished product is placed in a bin where it is put into fifty pound Bates Valve paper bags by means of a Bates Bag Packer. It i6 shipped in railroad box cars, each having a capacity of ft*am 1600 to 2000 bags. The three grades of "Filtrol" in greatest demand ares GRADE (Per cent, thru 200 mesh) 85 - 66 75 - 88 90 - 93 Per cent, of Total Production 80 15 5 Coarser Than 200 Mesh 14. 0% 23.0% 8.0S 200 - 325 Mesh 16# 0~/o 24. OS 23. OS Finer Than 325 Mesh 70. OS 52. OS 69. OS The only real dust producing operations in the production of Filtrol are the filling, stacking and handling of the fifty pound bags. Samples of dust taken during these operations revealed the followingr Operation Particles per cu ft. Average dust filling bags with 85-83 grade " " packing roam while filling bags " n produced in handling of filled bags 10,416,096 9,572,180 5,845,248 An, exhaust system has been installed to reduce and control the dust produced during the packing of Filtrol. This consists of a metal hood above the filling tubes in front of the machine, with a basin below. A seven-inch duct leads from the basin and a six-inch duet to a canopy in back of the packer, both connecting with a teninch main duct whioh runs to a Sturt event Fbn (1750 R.P.M. ) designed to handle 1,620 cubic feet of air per minute against four-inch water static pressure. A cyclone dust collector removes the larger particles from the air before delivering it to a tubular cloth dust collector. About sixty per cent, of the dust particles of samples taken during the fil ling operation are slightly angular crystalline in appearance under the Konimeter mi croscope, and are about two microns or less in size; approximately twenty per cent, appear to be rounded crystalline, glass-like, but with rather smooth edges, and over ten microns in size. There are a large number of very small gray partioles (about twenty per cent.) too minute and too numerous to count accurately. What is the Chemical Composition of "Filtrol"? Below is the result of an an alysis by a commercial chemical laboratory in Los Angeles, California, of a sample of Filtrol from the Jackson (Mississippi) plant? Per Cent. Silica (Si02)........................... Alumina (A1203)......................... Ferric Oxide (Fe203)................ Titanium Oxide (Ti02)................ . Calcium Oxide (CaO)..................... Magnesium Oxide (MgO).................... Manganese Dioxide (M11O2 )............... Carbon Dioxide (CO2 ).................... Potassium Oxide (K2O)................ r. 56.90 13. 97 1*44 0.10 2.82 3.55 0.03 l E E E E C e tz E c c c E c c c c c c c c c c c c c E PO 01514 -26- Under the Fonimeter lacroscope the particles were rounded in appearance. The "Attapulgns -Tinas'" appeared sore crystalline and angular, and had a greater proportion of partidea five microns or 1ess in size than did the "Filtrol". The counts indicate that more dust results iron dumping Attapulgra Fines than free dumping Filtrol acti vated clay. Dunning fifty pound bags of "Kilwhite" (90% through 200 mesh), a Texas contact clay, into" the feed hoppers to the tadtrotors or mixing chambers is an rxceedingly dusry operation. Sanples taken during this operation had as high as 14,046,720 par ticles ten microns or less in size per euhie foot. Sanples taken in the middle of the roam just after thirty bags had been damped into the hopper had 55,847,040 par ticles per curie foot. Under the Konineter Microscope, about 90 of these particles appeared slightly crystalline, and were five microns or less in s i z e ; 1 0 ^ were round, seii-npequfi, ten to twenty microns in size. JSjere were also a few scale like par ticles. Fourteen men with an average service credit of six years are involved in this operation. Three men are exposed to the dust during six holm's of each eight hour shift for nine cf the fourteen shifts during the 85^ of the time the filtering plant is in operation. They wear !',, S. A. "Comfo" respirators. After extensive study and investigation the local management has made arrange ments to receive the clay in tank cars similar to those manufactured by the General American Tank Car Company. These cars are self-unloading and will discharge into an enclosed hopoer. The clay will then be transported to storage bins cy means of a screw conveyor completely enclosed in ten-inch tubing. It will be withdrawn fron the bottom of the bins, passing through weighing scales, into the inductors where it will be mixed with the o i L This will ^provide a completely closed system and should eliminate all air contamination. C - EC!~ FIACT. CF CHAFF-ID BOTE: Refined wax is filtered through bone black or charred bone to improve its color. This material is obtained from various meat packing firms in finely woven cof fee bags that hold about 150 pounds each. An open belt conveyer and elevator carry the tone directly from the reactivating furnace to the covered filter charging hopper. Metal chutes lead directly from this hopper into filters which hold about 3,000 pounds of bone black. Upcr. completion of filtration the bone is washed with "Varsol", steamed for about 24 hours, washed with hot water, steamed for two hours more, and then dumped upon belt conveyers which carry it to the reactivating furnace which is gas fired. The bone goes through the furnace at a temperature of about 1100 degrees Fahrenheit and at the rate of about 250 pounds per hour. Bone black can be used over and over again. Three men one on each shift, with an average service credit of fifteen years, are engaged in this operation. Their period of exposure to dust is about one hour per shift. The greatest amount of dust produced results from the open conveyers, particularly in dumping the material from the furnace onto the conveyer belt, Samples taken during this operation had as high as 11,044,800 particles of ten microns or less in size per cubic foot. Considerable dust (14,273,280 particles per cubic foot) also arises from the open hatch of the filter charging nopper during filling. An eight-inch motor driven exhaust fan has been installed to suck back the dust from where the elevator buckets dump the reactivated bone into the chute to the charging hopper. The dust loss from this filtering operp.tion is estimated to be abort 1500 pounds per month. Under the Konimeter Microscope abort 65/ of the dust particles of samples taken during the reactivation of bone black appear to be black, opaque, scot-like, and are -five macrons or less in size; 5% are rounded, sesi-opacue, ten microns,or more in size. ie angular crystalline and light grey particl es which constitute about 20%. are probably E MO 01516 It IE (C (C 1C (C (C (C in (C E c c c < E c c c c c IE <C IE IE IE IE 1C xC .IE vC LC ICS -27- bone ash. Ill - INSULATING OPERATIONS Insulation plays an important part in the processing of petroleum products. The two types of insulating material most frequently used are "Sponge Felt" (asbes tos with ground sponge to give dead air space and thus increase the effectiveness of the insulation) and a mixture of 85% magnesia and 15% asbestos. Rock wool is used to a considerably lesser degree. In the ordinary eemrr.ercial form. Rock Wool, as used at our refineries, does not present a dust hazard. It is also used for house insulation, and is available in small nodule form which can be blown into place. "85)1 magnesia" is a mixture of magnesia and granulated asbestos and pressed into blocks of various sizes and shapes (usually 16" x 18" x l-l/2"). The most dust cones from dismantling old insulation and grinding scrap material for use as a plas ter or "ganister". The average service of men engaged in insulating operations is about fifteen years. Most of these men have been transferred from the C c m o n Labor Department, They work nine out of fourteen eight-hour shifts, in gangs of from two to six men, and are actually exposed to dust for less than sixty per cent, of their working time. Goggles are sometimes provided, and occasionally MSA "Comfo" Respira tors, but this equipment is not used as much as it should be. Generally speaking, about 65% of their work is with sponge felt and 15/J with 85>) magnesia insulation. At one of the larger southern refineries about 300,000 square fee of sponge felt and 50,000 square feet of 85% magnesia are handled a year. A - What Physiological Reactions are Provoked by Insulating Materials? According to Dr. Leroy U. Gardner (Jours. Indust.fiyg.Mar. 1937,Vol. 19, No. 2, P. 121) asbestos dust with its fibrous particles does not seem to be readily handled by the protective mechanism of the lungs. Quoting from his article! "They are not removed to the lymphoid tissue but remain in contact with the delicate walls of the air spaces. They become surrounded by an iron-containing coating that fractures and gives rise to the pecu liar structures Imown as 'asbestosi6 bodies'. The fibers are irri tating, perhaps because of their f o m , and they excite a fibrosis which begins about the terminal bronchioles and spreads to form dif fuse patches in the parenchyma. Often the distribution is sub-pleural. In the presence of infection, the reaction to asbestos dust is much more severe than that caused by the dust alone." There is nothing in the pertinent literature, nor doe6 the Bureau of Mines know of any evidence, which would demonstrate magnesite (a natural magnesium carbon ate ) to be harmful. It would fall in the class of "nuisance dusts" such as Qrpsum. While many of the 6o-called "nuisance dusts" have never been found to be harmful, it i6 the opinion of most investigators in the field of industrial hygiene that no work er should be exposed to any dust in a concentration exoeeding 75 or 100 millions of particles per cubic foot of air. B - What are the Principal Insulating Operations and Bow Much Dust is Produced During Such Operations? There is, of course, a wide variation in the amount of insu lation work and the amount of dust produced. A few examples, however, will give a good general ideat INSULATING 12" STEAM LINES 6" x 18" x l-l/2" blocks of 85% mag nesia are tied on the 6team line with 14-- gauge galvanized wire and covered with roofing paper to make it waterproof. Often times this work is performed an scaffolds twelve to fifteen feet above the ground, with men lying on their backs under the line part of the time. E KJ01517 -28- Considerable dust (as high as 18,124,800 particles of less than ten microns per cubic foot) results from tapping the blocks into place. Samples taken during the entire operation had an average concentra tion of 6,881,760 particles per cubic foot. About 90# of these dust particles were slightly angular, crystalline in appearance and above five nicrans or less in size (as seen under the Eonimeter Microscope); 5% were rounded opaque, ten microns or more in size; and 5# were opaque scale-like, five microns or more in 6ize. Samples taken while applying asbestos sponge felt to a 12" steam line had a dust concen tration as high as 23,788,800 particles of ten microns or less in size per cubic foot. The average was 12,574,080 particles per cubic foot. These dust concentrations are considered too high for work ing without adequate protection. INSULATING A 750-POUND CRACKING COIL ACCUMULATOR 6" x 36" blocks of Johns-Marville. "Fire Felt" are first applied and plastered with extra AA Rubberoid Asbestos Cement and waterproofed with JohnsKanville "Insulkote". The dustiness of handling these materials has been considerably reduced since the manufacturers began shipping the "Fire Felt" in cardboard cartons containing thirteen or twenty blocks, and the plaster in hundred-pound paper bags. Samples taken during this operation had an average dust concentration of 4,502,880 particles, ten microns or less in size per cubic foot. About 75# of these dust particles were slightly angular in appearance, five mi crons or less in size; 10% were scale-like; opaque; and 15% were rod-like and fibrous. INSULATING TREATING PLANT ACID SUCTION LINE Sections of "Sponge Felt Pipe Cover" are cut to fit pipe lengths with an ordinary carpen ter's hand saw. This operation produces on an average 821,280 par ticles of dust, ten microns or less in size, per cubic foot. Under the Eonimeter Microscope all of these particles are slightly angular, crystalline in appearance, and five microns or less in size. The blocks or sections of the pipe cover are held in place by wrapping =16 gauge galvanized wire about each one. INSULATING CRACKING COIL HOT OIL LINES: All hot oil lines at crack ing coils are insulated with 2" asbestos tubing (85# magnesia and 15# asbestos) held in place by fine copper wire. Sections of the tubing are cut to fit particular areas by means of an ordinary carpenter's hand saw. This produces 7,788,000 particles of dust, ten microns or less in size, per cubic foot. Under the microscope, 90% of these dust particles appeared to be rounded crystalline and about three mi crons or less in size. Each section of tubing is pounded into place with the open hand so that it fits snugly against the pipe, and then wired into position. The dust produced from both of these operations averages about 3,379,520 particles per cubic foot. Under the micro scope, approximately 80# or 90# of the dust particles appear crystal line, more or less angular, and five microns or less in sizej the re maining 10# or more are rounded in appearance, and over ten microns in size. . DISMANTLING OR REMOVING OLD INSULATION: As a general rule, the dismantling or removal of old insulation is a more dusty operation than the application of new insulation. The old insulation is chopped or cut with a hatchet or small hand--axe, anri pried loose and pulled off with the hands. This produces dust concentrations as high as 5,590,560 particles, ten microns or less in size, per cubic foot. In t EMO 0 1 5 1 8 dismantling an old cracking coil 4" tar line, the average dust concen tration was 2,322,240 particles per cubic foot. In appearance these particles were clear crystalline, rather rounded, and five microns or less in site. Ko fibres were observed in any of the dust samples from dismantling operations, After a few weeks or months service, insula tion on hot lines dries out and appears to disintegrate. This is prob ably due to the fact that sueh insulation is usually covered with a weather-proof material which prevents absorption of moisture from the air. CRUSHING SCRAP ASEESTOS: Scrap asbestos insulation, usually the 65% magnesia type, is crushed in a belt-driven Williams crusher to pass through a screen with one-inch holes or slots, and is then mimed with new asbestos to make insulating plaster. This operation, which is a very dusty one, is performed by two men, with an average service credit of about twelve years. Goggles end KSA. "Camfo" or Willson Dust Respi rators are worn." Considerable dust is produced in breaking up the scrap insulation by hand prior to crushing (10,195,200 particles, ten microns or less, per cubic foot), and also when feeding the crusher which is done by shovelling the broken-up pieces into the hopper and poking them down with a short wooden stick (14,839,680 particles per cubic foot). Dust counts as high as 27,527,040 particles per cubic foot were found in samples taken from over the hopper. These dust con centrations are dangerously high. About 65% of these particles are sharply angular, crystalline in appearance and five microns or less in size; 5% are opaque scala-like, six microns or more in size. Crushing scrap asbestos is not a steady routine operation, the exposure varying from eight hours a month to about twelve hours a week. CEUSEXNG OLD CORE INSULATION: This operation is performed approxi mately twice a year and takes about twenty or thirty minutes. The in 'sulation is crushed on a belt-driven Williams crusher, by the same men who crush the scrap asbestos. This crushed cork is used for insulating lines in the cold settling plant. The average amount of dust produced is 20,016,178 partioles, ten microns or less in size per cubic foot. About 60% of the particles are slightly angular, crystalline, in ap pearance, and five microns or less in size; 20% are round, semi-opaque, ten miorons or more. There are also a large number of very small black or dark grey specks. IV - GUNITING OPERATION What is Gunlte and Sow is it Applied? - Gunite is a mixture of approximately one part (one 94 pound bag) of Portland Cement and two parts (twelve scoop shovels) of clean sharp sand. The sand and cement are mixed dry, shoveled into the hopper of a Gunite machine, using water under about 40-pounds per square inch pressure and compressed air at thirty to ninety pounds per square inch. It is applied under pres sure, as a semi-fluid, against the surface to be protected (usually process equipment, such as, cracking coil soaking drums and storage tanks). In practically every case where guniting is done, it follows immediately, after the sand blasting job used to clean the surace. In most cases, the work is performed by the same crew. The indi vidual holding the gunite nozzle is provided with the same protection as is the operator of the sand blast nozzle, and the men tending the gunite machines are pro vided with respirators and are required to use them while actually handling the sand and cement. This involves mixing the materials and charging them into the machines (the two dustiest parts of a guniting job). Samples taken during these operations showed the following dust counts of particles ten microns or less in size: EMO 01519 -30- Operation Particles per cu. ft ^ c Screening sand priortomixing with cement.. 2,493,160 Mixing batch............................... 1,699,200 Shoveling mix into hopper.................. 6,485,280 About 402 of the dust particles in samples taken while mixing the batch and ^ filling the hopper were crystalline, quartz-like in appearance, and about five mi- crons in size. The remainder were dark grey in color and below one micron in size. The dust particles in air coming out of the bottom manhole of a soaking arum being gunited averaged 528,640 particles per cubic foot, and were slightly angular, crystalline in appearance and four microns or loss in size. A gunite crew consists of six men. The average service credit of the men in the Crews studied was eight years. Two "nozzle-men" who "spell" each other every two or three hours apply the gunite. There is one man at the gunite machine, and three men screen the sand and mix it with cement. Only about 252 of their working tine, or nine hours per week per nan, is devoted to guniting. ~ Removal of Gunite Lining: Pneumatic chisels are used to remove gunite lining. Samples taken from inside a cracking coil tar separator during this operation hac as high as 16,595,520 particles of dust, ten microns or less in size, per cubic foot, and an average of 10,804,080 particles per cubic foot. About 752 of these particles were rounded, angular, more or less opaque, in appearance, one micron or loss in size, and 252 were angular, quartz-like, about ten microns or less in size. A chemi cal analysis of the gunite lining showed that it contained 68.22 free silica. Four men from the Plant Labor Department, with an average service of seven years, spend about twenty hours per week removing gunite linings from process equipment. An air syphon provides ventilation, and the men are required to use the goggles and respira tors which are furnished them. V - WELDING AND CUTTING OPERATIONS Welding has never been considered a dust-producing operation. However, our studies and those of others indicate that the use of the modern coated electrodes or rods produces a large amount of dust in addition to the fumes which are evolved. An electric arc is used for most of the welding around refineries. There are a number of welding Jobe, however, for which oxy-acetylene is used, Oxy-acetylene is also used for practically all burning or cutting. c A - WELTING OPERATIONS: c 1. ELz.CTR.iC ARC WELDING: Electric arc welding is used an all types of coi^ struction and repair work. The average service of the electric welders i6 C about two years and most of them came iron the Labor Department, having been developed into welders at the individual plants. They are exposed to particulate matter generated by the welding operation on an average of six hours per shift, nine shifts out of fourteen. This particulate matter is ordinarily referred to blb "fumes or smokes". The particles when found have a much smaller size range than that of dust, such as silica. With seme operations there may also be some dust present, but the product formed from volatilizing the metal and rod coatings is commonly termed a "fume". All 2 welders are provided with approved hand shield or helmets equipped with #10 Iloviweld lens. Welding in shops is done in canvas or wooden booths. A 2 6team or air syphon is installed when any arc welding 16 done inside of closed vessels such as drums or towers. 2 ' 'What are Coated Electrodes? Coated electrode^ are metal welding rods covered G fi? E KO 0152 0 -31- wiih a camoosition which prevents oxidation and permits the formation of stronger and more uniform welds. What Do These Electrodes Contain and What Products Result Pram Their Use? In general, the""coatings used in modern coated welding electrodes are patented or trade secrets, with special virtues attributed to each. Obviously, it is inadvisable to put into these coatings materials which might produce products harmful to man. Nevertheless, chemical analyses of both the coatings and their products indicate that the continual use of same of these rods might possibly lead to complications. Most of the arc welding at our affiliated plants is done with #5 Fleetweld coated electrodes which come in two sizes (5/32" and 3/l6") and with General Elec tric w-20 5/32" coated rods. Other rods sometimes used are *4 Stainweld Ea2S alloy welding rod, b'/Vc' Stainweld A rods for stainless steel, and Murex lues el Steel coat ed rods. Among the constituents of some of these electrodes coatings are: Coated Electrode Brand Si02 Per Cent. Fluorine Calcium Fluoride "Fleetweld", Lincoln Electric Co...... "Murex". American Metal A Thermite Co.. "USS Cr-::i I S - e " , Amer. Steel A Wire Co. ... 37. 20 "Stainweld", Lincoln Electric Co...... "P.ezistal K-A-2S". Crucible Steel Co... 21.20 13.40 14.50 43.50 present All of the above coatings also contain Iron Oxide (Pe2 0 3 ) Manganese Oxide, either Mn2C>3 or MnC or both, and Aluminum Oxide (AI2 O3 ). in varying per centages. The composition of the fluxes or coatings used in G A E types W-20, W'-22 and W-22 is not available, but it is known that they contain amounts of ft*ee silicates and free silica. According to determinations made by the General Electric Company, the maximum concentration of free silica on any of their electrodes under a particular set of conditions is 1,575,000 particles per cubic foot of air with W-20, 778,0Q0 with W-22, and 1,093,000 with W-23 under other conditions the concentrations might be higher or lower than those given. The maximum permissible concentration as listed by the Metropolitan Life Insurance Company is 7,000,000 particles per cubic foot of air. Coatings also contain cotton fiber, cellulose, or other organic pulp which creates fumes, but since we are only concerned with dust in this study all fume pro ducing materials will receive no further consideration. Welding corrosion-resisting s+eel with coated corrosion-resisting steel elec trodes forms a slag, among the major constituents of which are: "Stainweld" U5S CR-N1 16-8 "Reiistal" Fluorine (?).............. ........... Silica (Si02)......................... Iron, Chromium andManganese Oxides... Calcium Oxide (CaO)................... 11*4%....... 6.6%........... 14. 9% 25.1%....... 36. 6%........... 13. 32 22.32........ 24.22........... 15.22 50. 7%....... 28.02........... 26.72 The major constituents of dusts separated from atmosphere by gravity and collec~ed from the bottoms of welding chambers after welding corrosion-resisting stool plates with coated corrosion-resisting steel welding rods are: i E HO 0152 1 -3 2 - "Stainweld" USS CR-U1 16-8 "Rezistal" Silica (SiO )....................... 11.051...... 19,S5 ........ 1* Calcium Fluoride (CaF )............ 40.551....... 11.4/. ........ 22.4% Oxides of Iron, Aluminum and Nickel. 30,2/1........ 52.15 35.6/ The following is an interesting comparison between the compositions of dust formed icien using bare mild steel electrodes ana when using coated electrodes for welding galvanised steel: Brand "Fleetweld" "Wilson" "Murex" Bare Electrodes % ZnO % Fe23 79.2 62.6 60.5 20.0 60.5 40.0 Coated Electrodes % ZnO % 67.5 78. 8 72. C 31.9 21.5 28.0 Investigations have shown that there zaey be as much as a five per cent, varia tion in composition of oust produced by the sane make and kind of electrode when used under constant conditions but by different operators. Ferric oxide (Fe203) which emanates from all welding arcs, regardless of the type of coating, is disagreeable but not harmful. Concentrations of iron oxide of about ten milligrams per cubic meter are said to be entirely non-injurious to the respira tory organs. Breathing the dense clouds of fumes of zinc oxide, formed when the zinc of the galvanized coating is boiled off by the heat of the welding arc, causes what is com monly known as "fume fever". This is evidenced by nausea followed by chills and ui^ pleasant fever. The fume fever does no lasting harm except after prolonged exposure, and the effects are not cumulative. Ordinary ventilation, which is necessary' in any welding operation, is considered adequate to prevent fume fever. What Is The Amount And What Are The Characteristics of Dust Produced By The Various Electric Arc Welding Operations? There is a wide variation in the amount character of dust produced by different types of rods on different materials uimer different operating conditions FUME, OR DUST PRODUCED EY ARC WELDING Material Being Electrode Size of Particles Welded Used Electrode Per cu. ft. Rivets inside Cross Coil Drum. G-- E W-20 Coated 5/32" 20,050,560 Mild Steel Blanks Inside Booth. G-E W-20 Coated 5/32" 14,839,680 Characteristics of Dust Particles. (Sizes and Per centages Estimated) About 93# angular crystal line, 5 microns or less in size; 2% rounded semi-opaque, 10 microns or more in size. About 80% round black or red dish brown specks, 1 microns or less in size; 20% slightly angu lar crystalline, 1 0 microns or less but mostly about 5 microns and large number reddish brown specks too small and numerous tc court. EM001522 33- FIC OR DST PRODUCED BY ARC WELDING (Continued) liatcrial Being '..'elded Electrode Used Size of Electrode Particles Fer eu. ft. Characteristics of Dust Particles. (Sizes and Per centages Estimated) l/4" Boiler Flare Inside Booth. -S neet- weld Coated 5/32" 11,441,280 About 80#angular crystalline, 3 microns or less in size; 10# round semi-opaque, 10 microns or more in size; 10# opaque scale like, 10 mi crons or less in size. Count less number of minute par ticles, reddish brown smudge. 1 - 1 /4 " ::iid Steel Irpansion Joint In side nOCt;`_ =*5 Fleet-. weld Coated 3/16" 19,661,793 About 95# angular crystal line, 3 microns or less in size; 55? rounded semi-opaque , 10 microns or less. Count less number of particles reddish brown smudge. 1/2" Rolled Steel (5,000= per sq. in. Tensile strength) In side 6+Foot Die- drum near he&c of closed end. -- 5 Fleetweld Coat ed 3/16" 2,265,600 All particles 5 microns or less in size; about 10# angular semi-opaque. Welding Rlange on 4" Steel Line Pipe, In side Booth. Lurer. Coated 3/32" 2,756,480 All particles 2 microns or less in size; slightly angular, glass-like; dark grey smudge. S/8" Boiler .-lane Inside Booth- t=5 Fleetweld Coated 5/32" 490,880 About 75# round, metallic opaque, 5 microns in size; 25# semi-opaque, crystal line. Countless number of minute particles Welding Riv ets in Courtney Edge Inside Crack ing Coil Soaking Drum. #5 Fleetweld Coated 5/32" 6,456,960 About 90 sharply angular crystalline, about 1 micron or less in size; 10# rounded semi-opaque, 5 mi crons or more. Countless number of minute particles. I ^0 01523 34- FUHS OR DUST PRODUCED BY APC WELD HI 5 (Continued) Material Being Electrode Sire nf Particles Welded " Used Electrode Per cu. ft. Characteristics of Dust Particles. (Sizes and Per centages Estimated) 18-fl Steialesi Steel Bernd et Top of S fairing Drus MT?heti Stanweld A Coated 1/2" Boiler Plate to 6" Pipe Inside Booth. G--"E W20 Coated 5/32" 3 A `n 849,600 About 6 0 slightly angular seiti-opacue, 0 microns or less in size; 20> rounded, over 10 microns; 20% very glass-like, 10 ni- j crons or less. 1 23,222,400 ! About 80^ semi-opacue, red dish brown rounded, crystal line, 5 microns or less; 20% round globules of metal 5 microns or more in size. Countless number of small particles. 1/2" Boiler Plate -to 6" Pipe Inside Booth. Roecling Iron Rod 5/32" 26,592,480 About 90 black opaque, 1 micror. or less in size; 5 rounded metallic globular, 5 microns or less; 5% sligr.t- ly angular, semi-opaoue, crystalline, 3 microns or less. Countless ntaber red dish brown particle?. Back Welding a Flange on 6" Standard Pipe in Out side Welding Shop. Fleetweld #7 Coated 5/32" 362,496 About 25% black opaque metallic, 2 microns or less; 5% angular'crystalline, 5 microns or less. Count less number of reddish brown particles. Back Welding a Flange on 6" Standard Pipe Inside Booth. Fleetweld #7 Coated 5/32" 1,000,640 About 95^ black opaque metallic, 2 microns or less; 5% angular crysta lline, 5 microns or less. Countless number of black particles. Welding Riv ets Inside Cracking Coil Vapor iser (Mild Steel Alumi num Coat ed ). Fleetweld #7 Coated 5/32" 6,253,056 About 95^ angular crystal line, 5 microns or less, mostly around 2 microns;5JJ semi-opaque, round, 5 mi crons. Countless number of black particles. fl EMO 01 52 4 fl 55 FUME OH DUST PRODUCID by ARC. WELDING (Continued) Material Being Welded Electrode Size of Particles Used Electrode Per cu. ft. Characteristics of Dust Particles. (Sizes and Per centages Estimated) Welding 2" Ring on 1" Mild Steel 5oiler Plate Inside Booth. Pleetweld #7 Coated 3/16" 27,662,976 All particles less than 2 microns. 70>J round, opaque; 30% slightly angular, crystal line. Countless number of black particles, reddish brown smudge. Mile Steel Scrap Plates Inside Booth. Stainweld A Coated 5/32" 2,605,440 All particles black opaque, 2 microns or less in size. EapS Steel Inside Booth Stainweld A Coated 5/32" 12,460,800 Abort 8C angular opaque, 2 microns or less; 20% slight ly angular crystalline, 5 microns or less. Countless number black particles, brownish grey smudge. The U. S.I.'avy recently conducted some extensive tests with coated electrodes, and found that the quantity of dust or fumes developed while welding on galvanized steel plate was greater than when bare steel plates were used end the dust remain ed in suspension for far longer periods of time. It was also found that the average size of the dust particles was 0.27 microns and that there were 130,000 par ticles under four microns diameter per cubic centimeter. Quoting the iiary reports "It is apparent that considerable quantities of cust are found in any arc welding operation. The dusn formed when operating on plain mild steel or corrosion resisting steel is largely derived from the flux coating on the electrodes, as is shown by the composition of these dusts". What Physiological Effect on Welders is Produced by The Use of Coated Electrodes. According to a study made by Doctors A.T. Doig and A. ?. G. McLaughlin on lungs cf Electric Arc Welders (Lancet - V. 20; 771 - 775 (April 4, 1936)), defi nite pulmonary lesions which gave rise to striking X-ray changes in the appearance of the lungs were found in welders which had breathed the dust or fume from coated electrodes. Quoting Doctors Doig and McLaughlin: "The electrodes or welding rods which contain a core of metal and an outer covering are consumed gradually by the heat generated (about 1500C. ) during the welding operation. The metal in the core of the rod becomes molten and, assisted by the flux contained in the covering, spreads over the surface of the metal which is being welded. The fume is therefore made up of tiie volatilized constituents of the coverings of the rods together with fine particles of oxidized metal, usually in the form of iron oxides. In addition the fumes probably contain gases such as nitrogen peroxide and ozone which are formed by the action of an electric spark on the air. The composition of the coverings of the electrodes or welding rods becomes, in the circumstances, a matter of some importance. Many substances, all of which we do not propose to enumerate, are used. The basis of the majority of the coverings is sodium silicate which acts as a flux. Again, the f*00l525 -36- L t: coverings of a certain type of electrode contain asbestos. The rods are e sometimes dipped in a mixture containing powdered asbestos and sodium sili cate, or asbestos yarn is wound round the rod and fixed by sodium silicate. c In seme cases the asbestos completely covers the rods, and in others it is merely a cord which is wound spirally about the rod. c "The composition of the fumes arising from electric welding electrodes c has not yet been fully investigated. Mr. L.C. McNair, 2.N. Engineering In spector of Factories, has however had partial analysis mace of the fumes evolved from an asbestos-covered electrode and some asbestos fibres were e found. When the particulate matter of the fumes was collected in an Owen'6 dust-counter, it was seen that a large proportion consisted of iron oxide c particles, with an occasional asbestos fibre. c "The X-ray appearances in the well-marked cases differ from the usual picture of asbestosis. In none of the positive cases and in only one of the suspicious cases was there any blurring of the diaphragmatic shadow, and in no case was the heart outlined blurred. The line of the interlo bar septum (a feature present in a number of films of cases of asbestosis) is seen in only one positive case. The opacities in the films are not ac centuated at the bases of the lungs, but on the contrary the upper lung fields appear to be the earliest, and in established cases, most markedly affected. Before asbestosis can be eliminated from the differential diagnosis it must be remembered that the asbestos fibres are being subjected iz to intense heat and are not in the same physical state as the fibres which are inhaled by workers in an asbestos factory. It is possible that a c typical picture of asbestosis might be produced by the inhalation of alter ed asbestos. Merewether. says that - 'the radiographic appearances of the developed or advanced states of asbestosis are distinctive, although they are not specific. While, as is the case with silicosis, certain radio graphic appearances may be looked upon as typical of the disease, frequent ly modifications of and departure from the typical picture occur'. The X-ray appearances in our cases most closely resemble those of a fine sili cosis, but the clinical features show two important differences. In the first place, the electric welders whom we examined are all in good health and are fit to work. The only symptoms observed were slight cough *nri morning expectoration, and in the first case a small haemoptysis occurred. This nan has not been away from work even far a day since he was first seen in June, 1933, and his health at the present time is good. None of the men suffers from dyspnaea. Secondly none of them has concomitant pulmonary tuberculosis. ' . "Miliary tuberculosis can be ruled out of the differential diagno sis for clinical reasons, and to some extent on the radiological appear ances. None of the cases shows the dyspnaea, cyanosis, "nrf tachycardia of acute or subacute miliary' tuberculosis. Chronic or healed miliary tuberculosis is rare and it is difficult to imagine that a condition of such rarity would be found in 6 out of one group of 16 men. In the X-ray films of the welders' chests the fine opacities are irregular in 6ize and shape, whereas in miliary tuberculosis of the lung the shadows are more uniform. "A further possible explanation of the X-ray appearances in this series of cases is tliat the inhalation of small quantities of nitrous fumes together with the superadded effect of fine iron oxide dust might set up snail areas of chronic inflamratory change, congestion, or fi brosis in the lungs. Again, the iron oxide particles might be opaque to the X-rays and produce the picture without tlye associated presence u u u u u u u u u uu'uinro PO 01526 of fibrosis and congestion." OXy-ACETYIiUI 'IJLD"UG: Cxy-acetylene welding is more or less confined to rwcii repair jobs or to certain emergency operations where arc welding is not available or practical. Exposure of men doing welding is more or less irregu lar. The} usually wear American Optical Company or Willson Welding Goggles with i=4 lioviweld lens. The amount of dust produced by oxy-acetylene welding is considerably less than that caused by the use of coated electrodes in arc welding, and varies considerably with the style tip anc welding rod being used as well as the material welded, as is shown by the following table: DUS' PRODUCED BY CXY-ACZTYLZ2I WELDIICG liartrial Being Welded Welding Rod Tip Used Particles Per Cu. Ft. Characteristics of Dust Particles (Sizes and Per centages Estimated) Galvanized I.etal Hoed Welding Shop. Uorway 5/32"* Aire 0 396,480 About 70# slightly angular, semi-opacue, greyish, 5 mi crons or less; 20? rounded semi-opacue, greyish crys talline, 10 microns or acre; 10 amorphous, scale-like; 10 microns or more in size. 1/4" 7. 2" Bar Iron, '..'elding She?. Oxwelc coj^perized steel 3/l6" Airco 509,760 About 80# black opaque, 1 micron or less in size;about 20? rounded, crystalline; 5 microns or less in size. 1/2" Boiler Plate, Soft Steel, Weld ing Shop. Oxweld cof*perized steel l/S" Oxweld #6 1,019,520 About 80? round, semi-opaque, 5 microns or less in size; 10# angular crystalline. Countless number of small black perticles. 1/e" Galvan ized Sheet Iron, Weld ing Shop. Oxwelc cof^perized steel, 1/8" Oxweld 1,35S,360 About 80# rounded, semi opaque, dark grey, 1 micron or less in size; 10# slightly angular crystalline, 3 mi crons or less; 10# sharply angular crystalline, 5 mi crons or less; countless number of small dark grey particles. Welding Teeth on 3and Saw. Simmons Saw Welding Rod. 3/64" Aero plane 7T^ 1,472,640 About 98# round black opaque, about 1 micron or less in size; 2# slightly angular, crystalline, 3 microns or less in size. b - bu?::i::g or cutting operations: 1, 0-^-AC-TYl-- The oxy-acetylene torch is used both in the construction -3 8 - and the demolition of process equiroent and works structures. It also plays an important part in emergency and rescue work. Goggles with shade #5 Hoviweld lens w e provided and their use is required. At the larger plants men with an averare service credit of six years spend about three-fourths of their working time on cutting or burning operations (about half their time is given to "blaming steel" for new construction). The amount, of dust pro duced is usually greater than that caused by oxy-aeetylene welding. DUST PRODUCED BY CXY-ACZTYLZIH BURHIPO Material Being Burned Tip Used Particles per eu. ft. Characteristics of Dust Particles (Sizes and Percentages Estimated) Burning 6" Flues (1-1/2" thick) Out of Shell Still. Oxweld #2. 1,869,120 About 75% r o m i black, 2 microns or less in size; 20% slightly angular, crystalline, 2 microns or less; 5% opaque, scale-like, various sizes. l/2" Boiler Plate (soft steel) Oxweld 4 2,716,720 About 9G semi-opacue, black, 2 microns or less 10% round, dark grey, over 5 microns ir. size. 2. WITH UATUBAl C-AS; A large part of the burning or cutting at one of the larger southern refineries is done with oxygen and natural gas (60 pounds per square inch pressure). A special torch with a l/l6" x 5/l6" tip made in the refineri' shops is used. Two men with an average service of thirteen years spend a najor portion of their working time on this natural gas. They wear goggles with shade Koviweld lens. Samples taken while burning holes in 3" standard pipe in the yard outside of welding shop with oxygen a^d natu ral gas had a concentration of 471,811 particles, ten microns or less in sire, per cubic foot. About 75^ of these particles were slightly angular crystal line in appearance under the Konineter microscope, and were five microns or less in size; 25% were rough scale-like, opaque, ten microns or less in size. There were also many minute particles. - HEALTH HAZARDS PRODUCED BY WELDING ATT BURLTUG OPERATIONS:Although our study was confined to the fumes or dust produced by Welding and Cutting opera tion the possibility of lead poisoning from welding or cutting iron plates that have been previously coated with red lead should be pointed out. Lead poisoning from this source is rather common, especially in cutting up old scrap, bridges, tanks, and other iron structures that have through many years of use received protective coatings of red lead. The action of the flame volatilizes this lead material and creates a smoke that is poisonous. The same hazard exists in cutting out rivets in new structures. It should also be pointed out that same of the weldirg rods contain manganese which is very poisonous when taken into the body. There is an a p parent hazard from volatilizing this material, or rather changing it to the oxide of manganese, and breathing the fumes produced. There are further dangers from carbon monoxide and oxygen deficiency owing to the use of gas-cutting or welding flames inside small tanks or similar confined spaces. It is becoming more and more recognized that persons engaged in cutting and welding operations, either by are or flame, should have respiratory protec tion, in all work where there is a possibility of the workmen breathiDg fumes and dusts created. i EH001528 t c c c c c E ~E E E E E E C c c c c c c c c c c: c c c c G C G -39- VI - GRINDING OPERATIONS Power grinders are perhaps the most universally used of the small powercriven tools. The usual power grinder, c o m o n l y known as the emery wheel, consists of a cast metal stand and two abrasive wheels mounted on a through shaft wiich is either belt or motor driven. There are also several grinding wheels, such as are found on machine tool equipment where grinding takes the place of lathe end planer work. All grinding operations produce dust to a greater or lesser degree, depending on the composition and construction of the wheel, the material being ground and the ventilation or exhaust hoods provided. What is the Composition of Grinding Wheels? Grinding wheels are made of either bauxite which is mined, or silicon carbide which is made by heating a mix ture of quartz sand, coke end c a m o n salt in an electric furnace. The bauxite or silicon carbide are crushed to the desired grain size, mixed with an adhesive sub stance called a bond, and formed into wheels, discs, cones or cylinders. There are many wheels in which the binder is shellac, rubber, bakelite and other organic com pounds. Bauxite v,-heels are knov,m in the shop as "Alundtc" and "Aloxnve", while silicon carbide wheels are known as "Crystolon" and "Carbcrundim". Alundun wheels should be used or. material of low tensile strengths such as cast iron, brass, aluninun, copper anc marble. Is Acre give Bust Harmful? According to Dr. K. Irving Clark in a paper read a- a meeting of Government Officials in Industry (Boston - hay 21, 1931) the artifical Ehrasives, alunin-xc oxide and silicon carbide do not contain free silica and their dust carrot produce silicosis. ,The cust, like any other inorganic dust, can, however, if breathed for a long period of time in large quantities, produce en X-ray picture similar to that of early silicosis. This picture ohanges very slightly as years cf exposure increase, and at no time are the nodules, characteristic of sili cosis, evident. Unlike silicosis, there is no progress in the process after expo sure ceases ant there appears to be no marked physical disability. Although there is no silicosis, the X-rays do show signs of pneumoconiosis. Carborundum dust, chemically, is silicon carbide. According to Killer and Sayers (U. S. Pub. Health Hep. Vol. 49 #3 of Jan. 19( 1934) carborundum dust when in jected into the peritoneal cavity of guinea pigs produced no reaction and was termed "inert". Dusts such as quartz and flint - silicosis producing dusts - produced a proliferative reaction. Leroy U. Gardner (l\ S. Put.Health Rep. Vol. 50 #21 of Kay 24, 1935) reports that carborundum produces practically no reaction when inhaled by guinea pigs in high concentrations over a period of time. Quoting from Dr. Gardner*s article, the part pertaining to carborundum dust: "The dust which does reach the tracheobronchial lymph nodes apparent ly lacks the proper physiochemical properties to stimulate any but a very slight proliferation of connective tissue. In the lungs, there is praotically no fibrosis." The Journal of the American Kedical Association (Notes and Queries 103, 1472, 1934) makes this statement regarding the health hazard of breathing dusj: from arti ficial abrasives: "Only silica (Si02) is capable of inducing silicosis, but any other mineral dust under conditions of prolonged and gross exposure may cause some increase ir. pulmonary fibrosis. If the relative potential harm of silica is rated as 10C, these other noa-toxic mineral dusts may be rated i E ^*001 529 -40- only on the order of 5 or 10. " Despite this comparatively low rating of hamfulness of these dusts it is generally considered advisable to use dust hoods and exhausts wherever practical as there is clinical evidence that workers exposed to heavy concentrations of dust of any kind are more liable to develop diseases affecting the nose, throat and chest during the winter months than those not exposed to dust. Dr. Clark believes that an effort should be made to keep the dust count below twenty million particles of less than ten microns per cubic foot of air. 1. What are the More Frequently Used Types of C-rinders. the Quantity and Character of the Dust They Produce? The grinders most commonly found in the refineries and as sociated activities are? A - TANDEM FLOOR TOCL GRINDERS: Tancem floor tool grinders, the most fre quently used type, are in most cases motor-driven and operate at a speed of from 1450 to 1850 PJiL The type of wheel or grinding media selected depends upon the ma terial to be ground. Generally speaking, the wheels found in most of the machine shops and wood working shops around our refineries used: l-l/2" x 10" Norton Alundtc (Grade P, Grit 46) wheels for sharpening tools and for general service grinding. 1-1/2" to 3" x 14" Carborundum wheels for miscellaneous grinding. - 3" x 16" Carborundum (Grit 30, Grade E) wheels for grind ing lathe and other machine tools. Sometimes two different wheels are used on tandem tool grinders; for example, a 2" x 14" grata 24, grade Q Norton Alundun vitrified wheel on one side and a 2" x 14" grain 44, grade K Alundun wheel on the other side. The amount of dust produced by the operation of tandem tool grinders depends primarily upon the composition of the wheel and the hardness and character of the object being ground. Theoretically, the operating speed and the pressure should also be determining factors, but these were not studied. The following are average dust counts of particles ten microns or less per cubic foot in samples taken in the breathing rone of the person using the grinder during the grinding of various ob jects on various wheels of tandem floor grinders: Operation Particles per cubic foot Grinding Cast Iron on 2" x 12" Aloxite (46M Grit) Wheel........ " a Steel Sleeve on a l/2" x 10" Carborundum Wheel...... " " Hard Steel Chisel on a 5/8" x 8-l/2" Alundum Wheel... " 'inn n n n 1 /2" x 10" Carborundum Wheel.. n nn n n n n 3^4" x 2.0" " " " " Pneumatic Tool Steel Chisel on a 3-1/2" x 14" Norton Alumdum (3836 - 0.5B) Wheel.......................... " " Chisel Bar on the same wheel (3836 - 0.5B Alumdum)... " " Tool Steel Chisel on a 1" x 10" Carborundum (Grain 46M) Wheel............................................ " Tool Steel on a 2" x 14" Alundum (24 grain,grade Q) Wheel n n nnnti "(44 B " K) " " aLathe Tool on a l/2" x 12" " (Grade P) Wheel...... n ft n n t t ti T1( n R ^ n 11,648,960 8,127,840 7,476,480 1,670,880 906,240 1,869,120 4,134,720 2,594,112 396,480 1,019. 520 339,840 1,331,040 EM001 53 0 t e c t c c e E C t t t t C c c c e t t c c c c c c c c c: c c -41- Operation (Continued) Partieles per cubic foot C-rinriinr a Lathe T o d an * 3" x 16" Carborundum (grit 30, grade F) ^ Wheel....... " Kild Steel on a l-l/2" x 10" Alundum Wheel.............. " Steel Dies on a 3" x 14" Carborundum Wheel.............. Squaring Shear 'Slades on a l-l/2"xl6" Carborundum Wheel. 362,495 6,655,200 56,640 2,577,120 Dust Produced By Ooeration of Tandem Floor Grinders, As would be expected, there is a wide vaTiation in "the appearance of the dust particles under the Ecnimeter nicroscope. These examples however, will give an idea of the characteristics cf the dust produced during the operation of Tandem Floor Grinders: Material Being Ground Size of Wheel Type of Wheel Characteristics of Dust Particles. (Sizes and Percentages estimated) 1" x 3" Mild Steel Bar 1-1/2" x 10" Alundum (C-rit 46, Grade ?) About 70# angular crystalline, 5 microns or less in size; 30% me tallic shreds; 1 0 white opaque, slightly angular, over 1 0 microns; many small black specks. Tool Steel 2" x 14" Alundum vit rified (Grit 44,Grade K) About 90% angular crystalline, 2 microns or less in size; 10# opaque, 1 micron or less in size. Tool Steel (Same ma terial as above) 2" x 14" Alundum vit rified (Grit 24, Grade Q) About 60# round, semi-opaque, 10 microns or less in size; 40%, angular opaque, 5 microns or less in size. Lathe Tool 3" x 16" Carborundum (Grit 30 Grade K ) About 75% round, crystalline, 5 microns in size; 25% sli^itly angular. Chisel Bar 2-1/2 x 14" Alundum (3836-0. 5B) About 70% slightly angular, 3 microns in size; 30% black, opaque, metallic. Pneumatic Hand Tool Steel Chisel 2-1/2" x 14" Alundum (3836-0. 5B) About 98# round, black, opaque, one micron or less in size. Lathe Tool 1-1/2" x 12" Alundum (Grade P) About 50% angular crystalline, 2 microns or less in size; 50# round, black, metallic, .1 mi cron or less in size. Lathe Tocl (Same as above) 1-1/2" x 12" Alundum (Grade R) About 75# angular crystalline, 2 microns or less in size; 25# round, black, metallic, 1 mi cron or less in size, Ef-001531 -42- DUST iRODUCED BY TANDEM FLCC?. GRINDERS (Concluded) Material Being Ground Cast Iron Size of Wheel Type of Wheel 2" x 12" Aloxite (Grit 46, Grade K) Characteristics of Dust Particles. (Sizes and Percentages Estimated) Abort 85# sharply angular, crys talline, 5 microns or less; 10# rounded angular crystalline, over 10 microns; 5# opaque scale-like metallic, 1C microns or less; large number of black metallic specks. Where "hard" wheels are used for grinding soft cast steel, about 98# of the dust par ticles are metallic and less than one-half micron in sire. With the exception of a very small nunber of men who devote about 95# of their working tine to actual grinding, there is a very wide variation in the number of men exposed and the length of such exposure to dust produced by the operation of tandem floor tool grinders. In only one case was a respirator worn. Goggles have been provided and their use required in most cases. B - TANDEM BENCH GRINDERS: These grinders are small in size and are used for sharpening small tools and light grinding. They are all motor driven and operate at about 3400 R.P.M. Different grade wheels are used, usually 1-1/8" x 8" Carborundum (Grain #60) on one side, and on the other a 1" x 8" Carborundum (Grain #90). The amount of dust produced by the operation of tandem bench grinders varies with the ma terial being ground and the composition of the wheel, but these average dust counts are fairly representative; Operation Particles per cu. ft. Grinding " " " Cold " 1/2" hard Chisel or. l-l/8" Grain #80 Carborundum Wheel.... " " 1" x 8" " #90 " " .... Boiler Plate on 1" x 8"#90 " " .... Steel Chisel on 5/8" x8-l/2" Aluncum (Grain 46* Grade F)...................... . 5,909,440 8,401,600 12,460,800 7,476,480 Dust particles ir. samples taken during the operation of the tandem bench grinder have the following characteristics: ' Material Being Ground Size of Wheel Type of Wheel Medium Steel Cold Chisel l-l/2"x8" Carborundum (#80 Grain) Medium Steel Cold Chisel (Same tool as Above) 1" x 8" Carborundum (#90 Grain) Characteristics of Dust Particles. (Sizes and Percentages Estimated) About 75# slightly angular crys talline, 5 microns or less in size; 20# round opaque, metallic, one micron or less; 5% semi opaque, over 10 microns and look like chips of glass. About 80# round opaque, 2 microns or less in size; 20# slightly angu lar crystalline, 5 microns or less in size. E ^001532 -43- DUST PRODUCED BY TANDEM SZ.'CTE GRINDERS (Concluded') Material Being Size of Ground . Wheel l/2" Soft Steel Boiler Plate (Taking off rough edges) 1" x 8" Hard Steel Chi sel 5/8" x S-l/2" Type of Wheel Carborundum (#90 Grain) Alundum (Grain 46, Grade ?) Characteristics of Dust Particles. (Sizes and Percentages Estimated) About 90? round, black, metallic, 2 microns or less in size; 10# slightly angular crystalline, 5 microns or less in size. About B5# round, black opaque, 2 microns or.less in size; 15# rounded crystalline, 10 microns or over. C - SINGLE FLOOR TOOL GRINDERS: There ere only a few single floor grinders in use. They range in sire from 1" x 10" motor-driven (1750 FJM) to 2-l/2" x 20" belt-driver. (1250 HPN). The larger sire is used for heavy grinding such as blanks and large tools; the smaller sires for sharpening tools and miscellaneous grind ing. The wheel on the large grinder is Carborundum (#9C Grain). For the smaller size class Grain 46, Grade M Carborunduz wheels are used on the 1" x 10" and Grain 24, Grade'O Alundun wheels in the l-l/2" x 14" sire. Samples taken during the opera tion of Single Floor Grinders had dust counts as followsi Operation Particles per cu. ft. Grinding " " Tool Steel on l-l/2" x 14" Alundum Wheel (Grain 24, Grade Q)................. Chisel on 1" x 10" Carborundum Wheel (Grain 46, Grade M)................. 1/2" x 4" Mild Steel Bar on 2-l/2 x 20" Carborundum Wheel (Grain 90)....... 679,680 2,594,112 4,451,904 The hoods which almost completely enclose these wheels act as practical dust collec tors. Dust particles produced by the foregoing grinding had these characteristics when examined under the Konimeter microscope: Material 3eing Ground Size of Wheel Hard Steel Tool Bit 1-1/2" x 14" Type of Wheel Alundum (Grain 24, Grade Q) 1/4" x 2" Mild 1" x 10" Steel Bar 1/2"sc4" Mild Steel Bar 2-1/2"x20" Carborundum (Grain 46, Grade 11) Carborundum (Grain 90) Characteristics of Dust Particles. (Sizes and Percentages Estimated) All particles were 2 microns or less in size. About 60# were an gular crystalline; 40# were rounded opaque. About 98#were black opaque, 2 mi crons or less in size; 2# slightly angular,5 microns or less in size. About 85#were slightly angular crystalline, 5 microns or less in siz ejabout 15# black semi-opaque, angular metallic, 2 microns or less ir. size. E MO 0153 3 -44- l e t D _ Eirr'IRSAL GRINDERS: As the name would indicate, universal grinders are used for a wide variety of purposes and therefore are in more continuous opera tion than are the other grinders, with the exception of the tandem floor tool grind' ers. There ere two types or makes, the Srown 4 Sharpe Universal Grinder which has e an operating speed of 3750 RPK. and the Grand Rapids Universal Grinder which operates at about 3850 RHi. The following abrasive wheels are used! e l/?" x 5" Norton Co. 3846 J 55 Alundun wheel for grinding c hardened carbon tool steel. c 1/2" x 7" Norton Co. 3846 I 85 Alundun wheel for grinding high speed tool steel. t: 2" x 3-1/2" Carborundum Co. grit 401-5-25, type 12 c Aloxite wheel for grinding case hardened steel. c l/4" x 10" CarbcrundtE Co. wheel used for cutting, t 1" x 10" " " " " " sharpening tools, reamers, dies and drill bits. t: Samples taken during the operation of the various Universal grinders had c dust counts as follows t Onerati on Particles per u. ft. Dressing l/2" x 7" Alundun (3846 I 83) Wheel with a 1,397,120 t (Evidently the clouds of dust which cone off during dressing have partiele larger than 30 nierons) c Grinding High Speed Tosi Steel on 1/2" x 7" Altadme Wheel " (3S4C I 83)......... ................... 1,846,464 c " Hardened Carbon Tool Steel on 1/2" x 5" Alundun Wheel (3846 J 53)............................. 6,683,520 " Case Hardened Steel on 2" x 3-l/2" Aloxite (Grit 401 - P - 25 Type 2)............. Cutting off Tcol Steel with 1 /4 " x 10" Carboruncmr. Wheel.... 84,960 1,416,000 Dust particles in samples taken during the operation of Universal grinders have these characteristics: . c= Iiaterial Being Ground Size of Wheel Type of Wheel Characteristics of Dust Particles (Sizes and Percentages Estimated) Dressing Wheel With a "Diamond Point" 1/2" x 7" Alundun (3846 I 8B) About 80% slightly angular crys talline. About 3 microns in size; 20% black opaque, round, about 1 micron or less in size. High Speed Tool Steel (a Landis Pipe Chaser) 1 /2 " x 7" Alundun (3846 I 8B) About 60% opaque angular, about 2 microns or less in size; 40% slightly angular, crystalline, 5 microns or over in size. t EP001534 1 -45- Dust particles in samples taken during the operation of Universal grinders have these characteristics (Continued): t Material Being Size of Characteristics of Liust Particles. B Ground Wheel Type of Wheel (Sizes and percentages Estimated) g Earaened Car- 1/2" x 5" Alundun About 30-% angular crystalline. borated Steel (3846 J 5B) about 2 microns or less in size; a (Pipe Grip for 70% round black opaque, less than Pipe Machine) 1 micron in size. Numerous black a specks too small to co\nt. Several large oblong black opaque par- g t i d e s about 20 microns wide and 35 or 40 microns long. 3 Case Hardened 2 " x 3-1/2" Aloxite All particles black opaque, 1 mi- 3 Steel (Flung- ers for Fill- (Grit 401-P25 Type 12) cron or less in size. a ing Machine) 3 I - SU?.?ACI GP.IMDZHS: Surface grinders are used almost exclusively or. valves 9 and dies. They are equipped with either l/2" x 8" Norton Alundun (1946Z) wheels or l/2" x 4" to 6" Carborundum: (Aloxite) wheels. No dust collectors are provided, the S cast being thrown out into the atmosphere. Samples taken curing the operation of sin*face grinders had the following cust concentration (10 microns or less): 5 Operatlon Par^-j cles per cu. ft. Grinding Soft Cast Steel Valve on l/2" x 6" Carborundum { Aloxite Wheel........................... 566,400 " Tool Steel Die on l/2" x 8" Alundun (1946E) i Wheel.................. 1,019,520 Dressing Surface of 1/2" x 8" Alundvm Wheel with a "Diamond i Point"................................... 1,132,800 | About 70% of the particles from grinding the steel die were metallic, 3 mi crons or less, whereas 98%* of the particles from grinding the soft steel valve were | metallic. Many of the particles were too small to identify or count accurately, ( F - LANDIS TOOL GP.INDEPS: Landis tool grinders are usually equipped with two different types of wheels, one for side grinding and the other the ordinary type. 5 l-l/2" x 12" Carborundum Aloxite (Grit 40, Grade E, Bond 33) is used far general purpose grinding such as bull chisels, diamond points, cold chisels, flanges and | scrappers. The Side Grinding Type is usually a 2-l/2" x 1-1/2" x 12" Grit 46A-P P678 Aloxite brand AA wheel used for grinding Landis dies. At one plant the wheels j of the Landis tool grinder are enclosed by hoods at the rear of each of which is attached a two-inch pipe connected to a three-inch pipe which discharges into a sewer. Suction is induced by a stream of compressed air from a half-inch pipe in serted in the two-inch pipe just back of the hand. This arrangement acts as a sy phon and pulls the dust away from the person using the grinder. Samples taken dur ing the operation of Landis tool grinders had dust concentrations as followst E KO 0153 5 - 46- t t Opem tion Pa:-':icles per cu. ft. t Dresring 1-1/Z* x T2* Aloxite Wheel (Grit 4Q.Urade E, Bond 33) 226,560 c (Evidently partieles in the cloud of dust thrown, off by the 2-l/2" x 6" Ketealf .Emery Wheel Dresser are larger c than 30 microns in sire) Grinding "Ditnarmd Point" Chisel on l-l/2" x 12" Aloxite Wheel c (Grit 40, Grade 2,067,360 Grinding 2-1/2" x 6" U a d i s die on 2-l/2" x l-l/2" x 12" t: Aloxite Wheel (Grit 4SA-P P678)............................ 755,203 C Under the Eoriarter microscope dust particles in samples taken while dressing the l-l/2" x 12" Aloxite Kneel appeared slightly angular with a yellowish tinge and c: were five microns or less in size. About 75/1 of the particles from grinding the Landis die were round, opacue, end less than 1 micron in size; 25% were slightly angular crystalline, less than 2 microns. Particles from grinding the diamond point chisel were less quartz-like than those from grinding the die. This difference is, C of course, due to difference in the composition of the two wheels. On an average, Landis tool grinders are used about twenty hours a week, usually by different men. c: G - YAi.i-LL DF.IH GRINDER: Used for grinding all types of drill bits. Has a C side grinding type 1" x 1-1/2" x 9" Carborundum Aloxite (Grit 30, Grade K, Bond 28) Wheel Operating speed 1735 RHi, On an average a Yankee Drill Grinder rims about C: three hours a day and is used by four different men with an average service of twelve years. . ic Samples taken during the grinding of a 2-5/16" high speed drill had an ave rage cl 1,000,822 particles, ten microns or less, per cubic foot. About 70% of these ..dust particles are slightly crystalline in appearance, five microns or less'in size; 30 were rounded, semi-opaque, over ten microns in size. There were also a few small metallic shreds. No exhaust or dust collector is used ir. this grinding. C E - AUTOMATIC CIRCULAR SAW SHARPENING KACEINIt There are a number of these grinders in use in the wood working operations - such as in the production of wooden barrels, boxes and crates - closely associated with the refining of petroleum pro ducts. Since they are automatic when once put in operation, there is very little dust hazard except where no exhaust or dust collectors have been installed and the dust produced is thrown into the filing room atmosphere. Automatic Circular Saw Sharpening Machines are equipped with l/4" x 8" Norton A i ^ d v m Wheels (Grain 60, Grade K), 3/8" x 8" Norton Alundum (1946 K) wheels, or l/2" x 6" Carborundum wheels. The average cust produced during operation of these machines is: Wheel Particles per cu. ft. l/2" I/4" 3/8" l/4" x6" Carborundum........................................ x12" " x8" Alundum (1946K).................................... x8" " (Grain 60, Grade N)........................ 1,923,280 3,568,320 2,095,680 1,461,312 About 98% of dust particles in samples taken while sharpening circular saws on the Carborundum wheels were black metallic in appearance, and one micron or less in size. About 75# of the particles from the Alundum wheels were rounded crystal line, 5 microns or under in size, and 25% round black metallic, about one micron or less in size. There were a number of small metallic shreds in the samples from the thicker (3/8" j 8") wheel. ' I - AUTOMATIC BAND SAW GRINDER: After the Ban^ Saw has been inserted and the 1 S3 E MO 0153 6 -47- nachine adjusted, this grinder works automatically. l/2" x 8" Grain 50, Grade N Horton Company Alundum. The wheel ordinarily used is a The wheel is refaced or dressed with a Metcalf Emery Wheel Dresser about twice a day. The average dust produced by this dressing operation is 2,284,480 particles less than ten microns per cubic foot. About 95% cf these cust particles are sharply angular crystalline in appearance under the Eonimeter microscope, and about five microns or less in size. The dust produced during the sharpening or grinding of the band saw blade is on an average only 877,920 particles per cubic foot. About 50% of these particles appear angular crystalline and about 50fi round black opaque. All of them are about two microns or less in size. J - AUTOMATIC 3 A w SAW LA? GRINDER: Used to grind ends of band saw prepara- tor.- to welding them together. The grinding wheel usually used is 5/8" x 10" Grain 46, Grade M, Horror. Company Alundum. No dust collector is provided although a dust count as high as 16,142,400 particles, ten microns or less, was found in one sample taken in front of the wheel while it was in operation. The average dust produced by this lap grinder was 4,964,320 particles per cubic foot. About 80>i of these cust particles were semi-opaque, slightly anguler in appearance, and two microns or less in size; 20% were black opaque, about one micron or less in size. K - FLAMING ENIFI BLADE GRINDER: Uses a l/2" x 8" Grain 46, Grade E, Horton Company Alundts wheel. Operating speed 3000 PPM. No hood or any other protection. Average cust produced while sharpening a Planer Knife Blade was 566,400 particles, ten nicrons or less per cubic foot, About 6O5Z of these dust particles were slight ly angular crystalline in appearance and about two microns or less in size; 40 were opaque of various sizes from about seven microns or less. There were a few small metallic shreds. ' L - LIHDIEMAH CUTTER GRINDER: Sharpens cutters from the Linderman machine for tongueing and grooving. Grinder uses a l/2" x 6" Norton Alundum (Grain 60,Grade H) cup .wheel. Operating speed 3000 RPM. There is a hood guard over the top of the grinding wheel, but no exhaust or dust collector, although dust counts as high as 14,306,560 particles, ten microns or less, were found at the front of the grinder in operation, anc 12,574,080 particles per cubic foot in the back. The average dust produced was 9,137,920 particles per cubic foot. About 70 of these dust particles are round seni-cpacue in appearance under the Konimeter microscope, and three mi crons or less in size; 20%, are round, globular like particles, seven microns or less ir. size; and 10% are metallic shreds about two microns wide and 20 to 30 microns long. There are many minute crystalline particles too small and too numerous to count ac curately. K - GANG SAW BLADE GRINDER: Uses a 5/8" x 10" Grain 50, Grade K, Norton Company Alundrum wheel, operating at 1800 RPM. A rather crude dust collector has been installed, but the average dust (8,760,320 particles per cubic foot) produced by this grinder in operation indicates that it is inadequate. About 90% of the dust particles in samples taken during the grinding of a Gang Saw Blade were semi opaque in appearance and about two microns or less in size; 10% were black round, opaque, one micron or less in size. There were numerous minute black speoks too small to count accurately. N -- EDGER SAW GRINDER: Uses a 3/ 8" x 8" Grain 60, Grade N, Norton Company Alundum wheel, operating at 1650 R H L No hood or any other dust collector for this grinder. The low dust count, an average of only 453,120 particles, ten microns or less per cubic foot, indicates that there is very little real need for such equip ment. The dust particles produced while grinding an Edger Saw Blade are angular crystalline, about two microns or less in size. 0 - CIRCULAR SLAB CUT-OFF SAW GRINDER: Uses a 3/4" x 10" Grain N, Norton EM001537 -48- t- Cpipp*rry Alundiza wheel operating at 1650 RRi. A rather ineffective dust collector has been installed, but the average high dust concentration (10,931,521 particles per cubic foot) shows that it is inadequate. About 80-% of the cust particles in samples taken during the sharpening of a Circular Slab Cut-off Saw were opaque in appearance, two microns or less in site; 20% were slightly engular crystalline, fire microns or less in site. There were also a large number of minute black opaque particles. P - "HOC- KNIFE" GRINDER: Uses a l-l/2" x 24" Carborundum wheel operating at 300 RHi. This grinder is completely enclosed by a metal hood, but the dust is dis charged onto the floor through an opening in the lower part of the hood. The average dust produced by the operation of this grinder is 1,869,120 particles per cubic foot. About 75% of these dust particles were angular crystalline in appearance under the Konineter microscope and four microns or less in size; 25% were round, black opaque, two microns or less in size, ~ Q - CUTTER GRINDER:. Uses a 3-l/2B x 2-l/2" x l/Z" Norton Alundum wheel (3846 3 5). The amount of dust produced depends upon the material being ground as is shown by the following! Grindinc a steel counter sink........... 73S,320 particles per eu. ft, " " " " reamer..................1,019,520 " " " " The dust particles are about 98% opaque metallic in appearance and about one micron or less in size. Wr.at Precautions Should Be Adopted For Safeguarding Those Who Use Grinding Wheels? Authorities generally agree (Jour, Indust,Hyg. Vol. VII No. 8 August 1925 p.351J that workers who habitually use grinding wheels will rim but slight risk of developing pneumoconiosis if they use certified abrasive rather than sandstone wheels for all grinding operations and if the machines upon which the artificial abrasive wheels are mounted are properly hooded and excessive dust removed by suction. Control of Dust Prom Grinding, Polishing anc Buffing Wheels. Exhaust systems for grinding, polishing and buffing wheels vary widely in design. In the case of grinding, the hoods used serve not only to provide means for capturing the dust but also act to protect the worker in case the wheel bursts. The chief difficulty to be overcame in grinding wheels, according to U. S. Public Health Bulletin No. 217, "The Determination and Control of Industrial Dust" (1935), is the outward sweep of air, a fan action, due to the revolving wheel. This effect is very' marked with high speed and rough wheels and is so strong that in many instances it is sufficient to counter act the normal inward flow of air. The same effect exists with polishing and buffing wheels but to a less marked degree. Practically all industrial States have codes regulating the construction and dust connections for grinding, polishing and buffing wheels. They also regulate the air required for wheels of various sizes in terms of static suction in the connect ing ducts. These codes possess no uniformity. However, the requirements designat ed by State codes must be followed, In States where no codes have been adopted it is desirable to provide exhausts on all grinding wheels with a suction at the con nection to the hood sufficient to produce a difference of level of at least two inches of water between the two sides of a U-shaped tube. A number of the wheels have been provided with suction exhaust produced by a motor driven fan or a hood, with a two-inch pipe one end of which is immersed in a bucket of wsier, The dust is drawn In by the rapid revolution of the wheels (1750 3^?'). This simple arrangement is particularly effective. Three samples taken near : discharge of a motor driven suction ffcn connected^with the hood of 1-1/2" x 10" E PO 01538 - 49- Alundum (Grit 46. Grade P) wheel while a tool vols being sharpened had an average of 2,076,989 particles per cubic foot which would have otherwise been thrwni into the machine shop atmosphere. As pointed out by Dr. Irving Clark in his paper "Dust Eazards and the Pre vention of Injury from the Same" read at a meeting of Government Officials in Indus try at Boston, Mass, on May 21, 1931, the most effective method of removing fine particles of dust is by suction applied as close as possible to the point where they are venerated and the amount of this suction is great enough to overcome the dis- persinr acnior upon the dust of the work being done. The velocity at the air ducts of an efficient dust removing tube should be 1500 linear feet per minute. Quoting Dr. Clark: "Do natter how well a worlman is protected he chould be kept under medical supervision and have a periodic examination of his heart and lungs. In addition, the X-ray should be employed freely in order to detect early signs of fibrosis in the Imigs and to show any signs of early pulmonary tuberculosis. In my experience with v;orkers exposed to inorganic cust, nan-silieous in character, a yearly physical examination with an X-ray every second year after ren years exposure is sufficient cut it must be remembered that this is the result of work in a factory where the character of the dust is relatively harmless and where excellent dust remov ing devices are installed on every machine where it is possible. '..'here free silica is present in large quantities the examinations should begin after two or three years exposure and an X-ray should be taken every year. ' Dr. Clark also states that men who are asthmatic, who suffer from chronic . bronchitis, or who have had pulmonary tuberculosis should not work at a dusty job. V 7I HANDLING POWDERED OR PULVERIZED MATERIAL A large amount of powdered or pulverized materials are used in the treatment of petroleum products end boiler water and in the manufacture of greases and inseoticides. In most cases approved respiratory protection is provided and its use r ^ quired when handling the materials. Exposure to dust is usually intermittent and of short duration. .Among the powdered or pulverized materials used in the refining of petroleum products and associated activities are: A - LIME? Lime is extensively used in the hydrated form and to a muoh lesser d ^ gree as lirr.p quicklime. 1. Hydrated Lime: Used in the preparation of lime soap grease and the manu facture of pressure gun and cup grease; also in the treatoent of boiler feed water to "soften it". It comes in fifty pound paper bags by railroad, usual ly about 1,000 bags to a car. According to a chemical analysis of a typical sample, hydrated lime contains: Fe2C3Al20j......... CaC................ MgC................ Insoluble Silica Residue... per cent. It ft ft ft ft ft (Remainder mostly Moisture and Volatile Matter) .-rom 15C t o 350 pounds of lime are used per batch ^in the manufacture of greases. EM001539 -50- Tb seeks of lime ere usually opened and dumped Into the mixing kettle. Con siderable dust (as high as 34,890,240 particles less than ten microns per cu bic foot in one aaaple) is produced by this operation. The average dust pro duced is fi.733,305 particles per cubic foot and the average exposure per batch is about five minutes. The number of batches made per week varies from one to twenty-five. No respirators are worn by men dumping hydrated line at any of the points where it is used with the exception of Baton Rouge where the wear ing of -the KSA "CtBEfo" respirator is required. About 85JI of the durt particles in samples taken while dumping line in mixing kettles are slightly angular, slightly opaque, ciystalline, in appearance under the Konimeter microscope,and five microns or less in size; 15 are rounded, seal-opaque, with a metallic greyish color, ten microns or over. There are also a countless nvmber of very small particles. Only a small quantity of Hydrated Lime is used in the treatment of boiler feedwater. About 70 pounds of lime is mixed per batch and about six batches are msce -every day (24 hours). The mixing is done by one man on each shift. Although the exposure is very short, the men at Ingleside Refinery wear Willson "Dust-tite" respirators while dumping lime. The average cust produced curing this operation is only 657,024 particles, ten microns or less, per cubic foot. This low cust concentration is the result of a spray of water from a two inch pipe across the hatch of the mixing tank just below the opening while sacks are being dumped. Consequently, the material is wet almost as soon as the line is introduced. About 95> of the dust particles in samples taken while the lime was being dumped into the mixing tank were semi-angular crystalline in appear ance, and from five microns or less in size, and 5% were round opaque, two mi crons or less in size. ' - 2. Lump Oujckltao; Used to "soften" boiler feedwater. The lime used for this purpose is Oyster Shell Lump Quicklime (97% CaO). It comes in fifty pound paper-lined burlap bags, and eight bags are usually used per batch. One batch is made per shift. The dumping and mixing requires about ten minutes per batch, and the nan doing this work is protected by rubber type goggles, but no respi rator. The average dust produced by handling the bags of lump Oyster Shell Quioklime is 2,605,440 particles per cubic foot. The average dust produced while dumping the bags of lump Oyster Shell Quicklime into the mixing tank is 294,528 particles, less than ten microns, per cubic foot. The handling and dumping of this Oyster Shell Quicklime produces less dust than is produced by the hydrated lime usually used. About 95% of the dust particles in samples taken during the dumping of Oyster Shell Quicklime into the nixing kettle ap pear slightly angular, crystalline under the Konimeter microscope, and are five microns or less in size; 2% are round, semi-opaque, over ten microns in sizej and Z% are black opaque scale-like, five microns or less in size. What Physilagical Effect is Produced by Lime Dust? According to the Inter national Labor Office (Occupation and Health, Vol. II, 1934) particles of lime mix with the sweat of workmen handling it and irritate the uncovered pores of the skin; lesions of the mucous membranes are also set up. We are told that: "The action of quicklime is due partly to it6 avidity for water (dehydration), to the heat given off in its reaction with water, and partly to the peculiar causticity of the alkaline oxides or alkaline earths. Quicklime exert.s essentially a local action (on the skin and mucous membranes) irritating and caustic, which is naturally less marked in the case of slaked lime. Milk of lime is a feeble caustic acting only on the mucous membranes. The dilute lyes are only caustic to the skin after prolonged ac '' tion ar.d especially when they are warm *001540 L E E E e t: e e E E E E E E E E E E E E E E E E E E E -51- "In practice it is the dust of quicklime and slaked lime, given off in the course of manufacture and manipulation, which gives rise to the well known lesions. This very fine dust is deposit ed readily on the mucous membranes and skin. When inhaled it may penetrate as far as the respiratory tract. M Although lime has a tendency to irritate the mucous membranes of the respira tor;-- tract, it is not considered particularly hazardous when breathed in small Quantities at intermittent intervals. However, complications may result when a large amount of the dust is breathed more or less regularly. Therefore, it is desirable to wear an approved respirator such as the KSA "Camfo" or the Willson "lust-tite". ^ - rZTAir.i: ZT'.Z DUST: Metallic zinc dust (90% through 300 mesh) is an important constituent in Pipe Thread Coating Compound. About 1500 pounds of this material is used per batch, and about fifty batches are made per month. The rinc oust comes in 400 pound wooden kegs or 500 pound steel drums. According to a chemical analysis, this zinc dust is 99. 20 ^ metallic zinc and 0.80% zinc oxide (ZnO). The particle size distribution of a typical sample as determined by a standard screen analysis is: All through 120 mesh screen 3.76% retained 2.04 " 22. P4% " on200 mesh " 250 " " 325 " The zinc cust is dumped from the keg or drum onto a metal sheet in front of the ket tle and shoveled into the kettle by two or three men (with an average service of about three months) from the General Labor Department. This is a very dusty opera tion. One sample taken during the shoveling of zinc dust had as high as 68,760,960 particles per cubic foot of air the average concentration being 28,331,328 par ticles, less than ten microns, per cubic foot. The workmen are exposed to this dust about thirty minutes per batch or approximately 2-l/2 hours per month. They wear oust respirators. About 95% of these dust particles are dark grey, opaque, angular ir. appearance under the Korimeter microscope, nnd about five microns or less in size; 5% appear slightly angular, crystalline, ten microns or less in size. The crystalline material is probably zinc oxide. What Physiological Effect is Produced by Zinc Dust? Although zinc oxide (ZnO) produces definite physiological effects, metallic zinc dust does not seem to affect the person breathing it other than that caused by the inhalation of any inert dust. Kevertheless some investigators are of the opinion that zinc is not entirely inert and harmless. Certeinly it is not as harmful as lead or arsenic, but the United States Public Health Service has certain limitations on the amount of zinc that is permitted in drinking water. According to Nuck, E. Remy, and F. Foltzmann (Jour. Indust. Hyg., Vol.12, 1930, page 171 Ab. ) Zinc dust can cause lung trouble after being inhaled in large quantities. Zinc dust is also very definitely explosive. C_ - /-SSESTOS "FLOAT"; Float asbestos is used in the manufacture of tractor lubri cants. It comes in 150 pound cloth bags by railroad, about 2000 bags to a car. From 200 to 3000 pounds are used per batch and from two to fifteen batches are made per month. The bags of asbestos float are dumped into the mixing kettle by three men v.ith an average service of twelve years. These laborers are exposed to dust about fort;.- minutes per batch. Dust concentration as high as 8,269,440 particles, ter. microns or less in size, per cubic foot are produced during the dumping of as bestos float, the average being 3,056,560 particles per cubic foot. About 98% of -these particles are slightly angular, round, transparent in appearance under the .-.ouineter microscope and two microns or less in site; 2% are round, semi-opaque, E P001541 -52- plate like, five microns or over in size. Recent investigations have indicated that the inhalation of asbestos particles ten microns or less in size is even more hazardous than was originally believed, and that in order to prevent harmful effects concentrations should be kept below five million particles (10 microns or less) per cubic foot. The physiological effects have already been discussed under "ASBESTOSIS" so need not be given any further con sideration. Men handling asbestos float should be required to wear approved respi rators. D - GROUND MICA: Ground mica (80 mesh) is used in the manufacture of axle grease. It cones in 100 pound burlap bags. About fifty pounds of ground mica is used per batch and an average of five batches are made per month. The period of expcsurs will not exceed ten minutes a batch. Handling ground mica produces an average of 2,577,120 particles ten microns or less in size, per cubic foot. About 60% of these particles are transparent irregularly shaped scale like in appearance under the Konimeter microscope, and five microns or less in size) about 40'. are over ten mi crons in size. The transparent plates have small lines or fissures and appear to contain small air bubbles. Although ground mica has never been considered a hazardous cust, seme recent studies made among the workers in North Carolina indicate that continued exposure to large quantities of ground mica over a period of years will produce a fibrosis. How ever, there is very little probability of any trouble where concentrations are kept below 10,000,000 particles per cubic foot of air and where the exposure to mica dust is such a small percentage of the employee's working time. 2 - SUL.-hLr.: Sulphur f l o w is used for sulphurizing cutting oils and in the preparation of special lubricants for hypoid gears. Crude sulphur is used in the manufacture of sulphuric acid and in the treatment of gasoline and naphtha for re moval of impurities such as the mereaptans. Sulphur Flour; Sulphur flour cones ir. paper-lined woocer- barrels, 100-pound clour, bags, or 150-pound burlap bags. About 2500 pounds of this sulphur is dteped into the melting kettle by two men with an average service of twelve years, once a day. Their exposure to the dust which results from handling and dumping the bags, an average of 1,540,608 particles, ten microns or less, per cubic foot, is about fifteen minutes per man per shift on an ave rage. No goggles or respirators are worn. About 90% of the dust particles in samples taker, during the dumping of the sulphur flour were slightly angu lar crystalline in appearance under the Konimeter microscope, and five mi crons or less in size; 10% were semi-opaque, rounded, and over five microns in size. The larger particles appear to contain small air bubbles. There were also a number of very small specks. About 370 pounds of flour sulphur is used per batch in the preparation of hypoid gear lubricant. Two batches are made per week on an average. The exposure to the sulphur dust is only about two hours per week on an average. Since the sulphur is dumped into drums of oil being agitated by a rapidly revolving propeller type mixer more dust is produced than where the bags are simply dumped into a kettle. Samples taken during this opera tion had as high as 6,910,060 particles, ten microns or less in size, per cubic foot. The average was 3,783,552 particles per cubic foot. The dust particles had the same characteristics as those given in the preceding paragraph. . Crude Sulphur; Crude sulphur comes in box cars holding about 90,000 pounds, usually from Freeport, Texas. Towers are filled with this sulphur by four HO 0154 2 - 53- aen with an average service of eight yeare. It requires about two hours to fill a tower with about 10,000 pounds of crude sulphur. Two towers are charg ed every week. Consequently, the Be n are exposed about four hours a week to the sulphur dust caused by breaking up the I m p s (4,304,640 particles, ten mi crons or less, per cubic foot) and shoveling the crude sulphur into the tower elevator (an average of 3,357,640 particles per cubic foot). The amount of dust produced by this operation is somewhat reduced by the steam turned on in side the elevator shaft to prevent dust explosions. About 60# of the dust particles in samples taken while the tower was being filled were slightly angu lar crystalline in appearance under the Eouimeter microscope and five microns or less in sire; 35# were rounded semi-opaque, ten microns or over in sire; and 5# were opaque scale like, between five and twelve microns in size. Sulphur dust particles are explosive h u t otherwise are not considered hazard ous any more than any of the other "nuisance" dusts, although they will irritate the mucous membranes and the eyes after slight exposure. Consequently, it is advis able to wear rubber type goggles and approved respirators, such as the USA Canfo type. In an article by Aldo Cestari (Arch. Intern. Pharmacodynamic, 1933, vol. 46, pp. 300-314) it is stated "Intratracheal injection of sulfur suspensions brings about ex cretion of hydrogen sulfide in a period of 50 hours. There are slight exudative and infiltrative reactions in the lungs. It is supposed that a substance similar to glutathione reduces the sulfur to hydrogen sulfide. " T - LITBAKGE Litharge is added to the Plumbite or "Doctor" Solution to assist in the removal of mercaptans, other sulphur compounds end unsaturated hydrocarbons freer; gasoline and naphtha. From one to five 600-pound drums of litharge are used in a batch, depending upon the stook to be treated and the condition of the "Doctor So lution". The litharge is removed from the arum a shovel at a time, and about fifteen minutes are required to dump one batch. A batch is made once a week on an average. The average service of the men involved in this operation is seven years. They wear MSA Cccfo respirators with an approved lead filter and rubber type goggles. All of the work of adding litharge is done in the open air on a platform at the tops of the solution tanka. The Average dust produoed during the dumping or shoveling of litharge into the solution tank is 3,077,480 particles, ten microns or less in size, per cubic foot, although there were as high as 9,288,960 particles per cubic foot during the operation. A rough estimation of this litharge concentration indicates the presence of from five to fifteen milligrams of lead per ten cubic meters - the amount that an average person doing moderate work would breathe in one day. This is in exoess of 1.5 milligrams in ten cubic meters which is the maximum allowable limit set by the United States Public Health Service. About 80# of these dust particles were.rounded, transparent, crystalline in appearance under the Konlmeter microscope, and five miorons or leas in size; about 15# were over ten microns rat appeared to contain small air bubbles; 5# were dark opaque scale-like, from five to ten microns in size. Necessary Precautionary Measures When Handling Litharge. Litharge is a campound of lead, and consequently there is the possibility of lead poisoning unless a few simple precautions are observed to prevent the entrance of lead into the body by swallowing minute particles of the litharge dust, by inhaling the dust, or by absorption from the skis when handling the litharge. An effort should be made to cause as little dust as possible. Instructions issued by the Medical Department re quire that c MO 0154 3 -54- "1. Ho employee shall handle litharge until he has been examined anc certified as physically qualified by the Company Doctor. "2. Employees must be sent to the Company Doctor for physical ex amination at least every six months or at the first sign of ill health. "3. P.esnirators - An approved type of lead dust respirator, proper ly adjusted, shall be worn when handling litharge. All respi rators shall be thoroughly cleaned with soap and warm water. "4. Clothing - Unionalls, caps or some head covering and gauntlet gloves shall be worn when handling litharge. Upon the cccpletion of this opera+ior. the outer clothing must be removed and placed in a locker used for this purpose only. Unionalls should be wanned at least once a week. "5. Bathing end locker facilities - A conveniently located locker and was h room shall be designated for use of employees hand ling litharge. Separate lockers should be provided for street clothes, work clothes, and one for Unionalls worn when hand ling litharge. In plants where men are handling litharge throughout the shift, only two lockers need be provided. The floors of the locker roams where the men change their dust covered Unionalls and the benches shall be thoroughly moisten ed before being cleaned. "6. Personal cleanliness - General personal cleanliness is of first importance. . (a) Hands must be thoroughly washed on the completion of the litharge handling operation. Hands must also be thoroughly washed before eating or placing anything in the mouth. A special effort should be made to clean the finger nails so as to remove any litharge. (b) Never eat until litharge covered clothing has been removed and the hands washed. (c) Teeth should be brushed at least twice a day and the teeth and gums kept in good condition. (d) The mouth should be rinsed thoroughly before eating. (e) Never use tobacco in any form while working in and around litharge." The responsibility for the careful observance of ALL of these instruc tions should be placed upon the foreman. _G_ - SODA ASH: Soda ash (58# NagO) is used to form a solution for neutralising acid oil. Thirty 200-pound cloth bags of soda ash are dumped into a tank of water per batch by six men, with an average service of five years, from the General Labor De partment; three batches a week. Men exposed to dust resulting from opening and draping the bags of soda ash about five hours a week. Eight men spend about half a day a month unloading bags from railroad box cars. The men who do the unloading wear MSA Comfo respirators and are not the same men as those doing the mixing who do "at wear any respirators or goggles. The average dust produced by the draping and i EP001544 L tz tz tz tz tz t: t ttz tz tz tz tcz tz tz tz I Cl e c c: c 55- elxlng operation is 1,003,337 particles, less than ten microns, per cubic foot of air. These partioles are all slightly angular, cjystalline ^ appearance under the Eonimeter mioroscope and about five microns in cite. Many are transparent, glass like. There are a number of small black specks. H - TALC or "SOAPSTONE": Pulverised talc or "soapstone" is used as a filler in the manufacture of "hot neck" greases used in the steel mills. According to R. E. Ladoo (U.S. Bureau of Mines Bui. No. 213, 1919) ordinary talc or soapstone is Steatite (hydrous magnesium silicate - H 2Mg3 (Si0j)4 ). In the form of powder, the talc is greyish white. Associate Chemist Frederick Goldman of the U.S. Bureau of Mines, who made a chemical analysis of samples of talc as marketed, reports: Si02.......... CaO........... KgC...................... Combined Oxides 46.04 4.39 26.20 15.64 per cent " " " " " " Grease makers usually consider the composition of "soapstone" which they use as aj>proximately 90> magnesium silicate and 10* calcium carbonate. It comes in 90-pound paper bags, 700 bags to a box car. About 7200 pounds are used per batch and one batch is made a day on an average. The "soapstone" is dumped into the mixing kettle by two men with an average service of ten years. This damping which requires about an hour per batch is a rather dusty operation. One sample taken at face level just after a bag had been dumped had as high as 22,995,840 particles, ten microns or less in size, per cubic foot of air. The average dust produced was 13,064,960 cust par ticles per cubic foot. About 9B% of these dust particles were transparent, crystal line, irregularly shaped plates and rods, in appearance under the Konimeter micro scope. Most of these particles (about 9S?Z) were five microns or less in size, the remainder being ten microns or over; about 2% were scale-like, semi-opaque, five mi crons or less in size. Physiological Effects Produced By Talc Dusts. About two years ago Dr. K. C. Dreeseen, Passed Assistant Surgeon, and J. M. Dalla Valle, Assistant Sanitary Engi neer, United States PublicHealth Service, made a study to ascertain whether there is a connection between talc cust exposure anc the relatively high tuberculosis death rate in Murray County, Georgia, where two talc mills and mines are located. They found (Reprint No. 1669 from the Public Health Reoorts Vol. 50, No. 5, Feb. 1, 1935, pages 131-143); ` "Physical and roentgenologic examinations were made of 66 men and women who were exposed or had been exposed to talc dust. In the higher dust groups comprising 33 men, 8 were found to have Pneumo coniosis I and 8 to have Pneumoconiosis II or III, Six of the thirteen examined were diagnosed as having Pneumoconiosis 1. No advanced stages of the disease were found in this group, In the group exposed to low concentrations of dust, no Pneumoconiosis was fouad. " The final conclusion of this study was that although Georgia talc appears to be "more injurious than tremolite talc" the high tuberculosis mortality rate in the County "could not be attributed to the talc industry". Investigators have suggested, however, that for more or less continuous expo sures concentrations of talc or "soapstone" dust should not exceed 15,000,000 par ticles, ten microns or less in size, per cubic foot of air. _I_ - GP-APZITI: Powdered graphite (80fi to B5% graphitic carbon and 15^ probably magnesium silicate) is used in the manufacture of spring and pressure lubricants. It EMO0154 5 -56- L e coaes in metal drums or 100-pound paper lined bags. About 370C pounds of powdered graphite is used per batch and one batch is made per day on an average. The c graphite is dumped into the miming kettle by men with an average service of seven years. This operation requires about forty minutes per batch per man on an average. c Three men are usually engaged in this dumping. They wear respirators while hand line and dtzaping graphite, which is not a particularly' dusty operation. The average e dust produced is 1,803,030 particles, ten microns or less, per cubic foot of air. All of these cust particles are rounded or slightly angular, black opaque, amorphous, c c sooty or dark grey in appearance under the Konimeter microscope, and three microns or less in size. . J_ . SL.-.TI FLOP?.; Slate flour (300 mesh) gives rigidity' to asphalt on "fast sur c faces" such as steep roofs and pipe lines, and prevents its running cff. _ It also produces desirable weathering properties. Mixtures as low as 10/ slate flour and tz as h i m as 40,1 are used. An average of two tons of slate flour is used to each still which averages about'800 barrels of steam reduced asphalt. Since the slate c flour is introduced by the use of closed pipe lines and centrifugal pizsps, the only dust produced is that which results during the unloading of the sacks and dumping c them into the hopper. The slate flour comes in 50-pound paper bags, 750 bags to a railroad box car. Four men with an average service of about a year, open the bags c and dump the slate flour directly into a hopper from which it is siphoned by com pressed air to a storage tank holding about 15 tons. About four carloads a month c are received and an average of about 5-l/2 hours is required to unload each car. About one and three-quarter million pounds were dveped during the last quarter c period. The men wear MSA Camfo respirators. A screen analysis of this slate flour showed that 9S. 71 passed through a 200 mesh screen and 96.8,1 through a 325 mesh c screen. Due to the fineness of slate flour and its low bulk density (1.04) con siderable dust, an average of 12,007,680 particles, ten microns or less in size, c per cubic foot of air, and counts as high as 16,538,880 particles per cubic foot, "'N*e produced during dumping the sacks and filling the storage tank. About 981 of c ,iese dust particles are slightly angular, transparent, crystalline in appearance under the Konimeter microscope, and five microns or less in size; 2% are semi-opaque, c slightly angular. There were a few plate like particles which appeared to contain snail air bubbles, and a large number of small black particles. c A petrographic examination made of a slate flour sample at t h e .United States c Bureau cf Mines Ixperiment Station in Pittsburgh, Pennsylvania showed that it con tained more than If Quartz (Si02 ), 301 Sericite (K2G-3AI2O3-6 S i C ^ ^ ^ O ) , 40 c opaque and 3Ul five different unidentified constituents. A chemical analysis of slate granules and flour (Jour. Indust. Byg.Vol. XV. ,No. 2,Mar. 1933,p. 67) reports these c constituents} " c Silicon Diox i d e.......... .59.271 Magnesium Oxide....... ?..211 Titanium Dioxide........... 0.99,1 Potassium Oxide....... 3. 751 c Aluminum Oxide.......... 18.811 Ferric Oxide........... 1.12l Sodium Oxide.... ......1. 881 Water below 110C..... 0.321 c Ferrous O x i d e ......... 6.581 " above " ..... 3.981 Managanous Oxide....... 0.131 Phosphoric Oxide...... 0.111 Calcium Oxide.............. 0.421 Carbon Dioxide........ 0.211 Barium Oxide............... 0.051 Ferric Sulphide....... 0.151 u u u u~u~u~u Specific Gravity - 2.795 "The silicon found, though expressed in the chemical analysis as silicon dioxide, is not differentiated chemically as to the forms present in the original minerals, whether free silica or silicate. B EMO 0154 6 a e I B i a i i 3 a i a i i - 57- Effect of Slate Flour on The Lungs - In his paper "Effects of Certain Silicate Dusts ia'the Lungs" read before the Industrial Eygiene Section of the American Public Health Association at Washington, D. C. on October 27, 1932, Dr. Waldeaar C. Dreessen of the United States Public Health Service, reporting the results of his studies of workers exposed to slate dust, wrote* "Of the 48 cases of pnetnoconiosis observed, all were in the first stage except 5 cases. In general, the pneumoconiosis observed in the early or first stage cases resembled that induced by cement dust. The bronchial striations, however, were somewhat more promi nent. There was always a moderate bilateral increase in the sire and density of the hilar shadows with accentuations of bronchial striations which extended well out into each lung field. The linear striations seemed "softer" in appearance and lacked seme of the sharpness of detail which is usually observed in the X-rays of individuals who have inhaled silica dust. This diffuse, fine generalised fibrosis was chiefly confined to the lower two-thirds of the lung fields. "lr. the second stage an increased prominence of the above mention ed characteristics was present with the appearance of flake like, dappled areas of increased density in both lung fields. In the third stage these dappled areas seemed to conglomerate, and in this manner gave way to massive, clouded areas of increased density." lr. Dreessen found that although the silicate custs of slate "induce a fine diffuse, bilateral fibrosis of the lungs which is definitely demonstrable in the X-ray" workers exposed to slate dust do not begin to show definite first stage pneumoconio sis until after more than ten years' exposure. Ee did not find any evidence that the resultant pnetnoconiosis had led to disability. g X - C-P.I11''; DEPP.IS P.OCT; Derris root is used in the manufacture of insecticides. It ccnes in 501-pound bales from the Dutch East Indies. In order to reduce dust, j the bales are thoroughly wetted with white oil. The root is ground at the rate of z33 pounds an hour to pass through a 3/8"-screen. One man with three years* seryioe | is exposed to an average dust concentration of 1,604,800 particles, ten microns or less, per cubic foot of air. About 80% of these dust particles are rather round, ] crystalline in appearance under the Konimeter microscope, and about five microns in size; 23%, are sharply angular, five microns or less in size. The particles ap- | pear tc be more inorganic than organic in character. Evidently the lighter root cust particles are either larger than 30 microns and were, therefore, filtered out | by the Konimeter filter or were carried out by the exhaust ventilation, thus leaving the cirt or soil which had adhered to the roots. The grinder is located in a small ! room well ventilated by means of a 30-inch motor-driven fan. This explains the low dust concentration in the samples taken during the grinding operation. The operator wears rubber gloves, cover-ails, and is provided with a fresh air hose type of mask while grinding. To ''hat Extent is Derris Toxic? According to recent studies by the United States >partnent of Agriculture (Indust. & Eng. Chem. Vol. 28, No. 7, July 1936, pps. 815-821) Derris is a possible health hazard to those engaged in milling, grind ing, and diluting it (Derris) without the use of suitable protective measures. Pharmacological studies shew that Derris and its water extracts affect the respira tory center which is initially stimulated and then, after fatal doses, completely depressed, with death resulting. Derris dust when applied to the armpits was also found to provoke a "mild evanescent irritation." --~ -- -LThPU-.: FLO'--- .S: Pyrethrus flowers are an important source of one EK0015A7 -58- of the essential ineredients of insecticides. They came from Japan in mat covered bales weighing about 450 pounds. On an average, about ten bales are ground per shift. Opening the bales of compressed flowers is the dustiest part of the opera tion, producing on an average 2,039,040 particles, ten nicrons or less, per cubic foot of air. About 85/ of these particles are angular, crystalline in appearance under the Konineter microscope, and three microns or less in size; about 15/1 are flat round particles and discs and shreds, ten microns or less. The crystalline appearing dust probably originates from the soil which has blown on .he flowers or plants. One man is exposed per shift for about four hours a cay during a nine month period. He wears a Willson dust respirator. The grinder is enclosed in a metal housing connected by a fourteen-inch duct to a sixteen-inch motor driven exhaust fan. Pyrethrun dust others in the least; some individuals to in pyrethrun dust. seems to irritate the skin of seme individuals as a matter of fact it causes an allergic type such an extent that it is inadvisable for such " and not effect of reaction in persons to work K - Kix::::- Arp ?kz?.z::z- "FLIT" P0W?S?.t " n i t " powder is a mixture of pulverized cerris root, p y r ethmi flowers and other ingredients. It is mixed in a special room provided with exhaust ventilation by a nan wearing a respirator. The dustiest part of this operation is sifting the pulverized derris and pyrethrun: which produces an average of 8,722,560 particles, ten microns or less, per cubic foot of air. About of these dust particles are angular, crystalline in appearance under the Konimeter microscope, and about three microns in size; about 5% are less crystalline and more opaque, five nicrons or less in size. ' Filling Cans; Three-quarter and two and one-quarter ounce tin cans are fill ed by automatic machines, the filler ends of which are enclosed in a metal housing with a four-inch exhaust duct to a fourteen-inch motor-driven fan. That this ex haust arrangement is fairly effective is shown by an average dust concentration in samples taken at face level of the operator during the filling operation of 1,755,840 particles, ten microns or less, per cubic foot of air. The girl at the Sealer wears a bag-type dust respirator. VIII - CLEANING TUBES AND DRUMS C O N T E N T S Cleaning tubes and drums of boilers and process equipment is a routine opera tion which produces considerable dust belonging more to the "nuisance" class than to the fibrosis causation group. Nevertheless, consideration should be given to keeping such dust down to a minimum of not more than 1 0 ,000,000 particles per cubic foot due to the number of men engaged in this work and their more or less continuous ex posure I. - CPAC"!"'* CCIL SCAKHIj DrT-T.S: Cracking coil soaking drums "coke-up" about once a month, so that in many cases they are almost completely filled with the ex ception of an opening down through the center no greater than twelve inches in diam eter. At most plants, this coke is removed by a special machine; at the others, men with an average service of ten years are regularly engaged in cleaning these drums by means of a concrete buster type of pneumatic chisel, starting at the top of the drum. One man works inside and two outside at the top manhole. The temperature inside the drum is about 90 degrees Fahrenheit. Each man works half an hour inside and is then relieved for about an hour. On an average each man works about two and a half hours per shift, two shifts a week. A "boatswain" qhair is used to get in and out of the drum. They wear "hardboiled" hats anc life-belts. Excellent ventilation is provided by a steam or an air syphon placed in the bottom manhole of the drum, as a result of which samples taker, at face level of men during the operation of the pneumatic chisel 'ad an average of only 211,520 cust particles, ten nicrons or less, per cubic foot of .ir. About 60 1 cf these particles -/.ere sharply angular, crystalline in appearance EMO 01548 c t c c n c c c c c c c c c e c c n c c e c c c c c cI c I c I -5 9 - rader the Konimeter microscope, and about five microns or less in site; 35# were round, semi-opaque, crystalline, about ten microns or over; and about 5% were small black'particles. There were also a few black scale-like particles over ten microns in site. The major portion of this cust is probably coke or carbon and the scale like particles are. no doubt, metal from the sides of the drum or fras. the chisel. II. _ CRACHINS COIL T H I S : There are 183 tubes in a high pressure cracking coil unit. After running from twenty to twenty-five cays, depending upon the char acter of the stock being run, the temperature and pressure, the petroleum coke which is deposited on the tubes must be removed. Liberty air-driven tube cleaners with cone and star cutters operated by men with an average service of six years are used for this purpose. The men work in gangs of six to eight and are exposed to dust about six hours every two shifts on an average. They wear neither goggles nor respi rators - although a dust samole taken .immediately after reve-smg the cleaning machine while in a tube contained as high as 9,062,400 particles, ten microns or less in sise, per cubic foot. About ZQ-% of these dust particles are black, opaque in appearance under the Konimeter microscope, and two microns or less in size; 4C% are angular, transparent, plate-like, ten microns or larger; and 20% are angular, transparent crystalline, five microns or less in size. Samples taken on the Cleaning Platform while cleaning Cracking Coil Furnace tubes at a Northern refinery' hac an average of 113,230 particles per cubic foot, linety-eight per cent, of these oust particles were rounded crystalline in appearance under the microscope and five microns or less in size. Samples taken in the passage way back of the furnace while tubes were being cleaned had as high as 1,076,160 particles, ten microns or less in size, per cubic foot of air. This indicates that the cer. ir. the passageway, back of the furnace are exnosed to more dust than those or. the cleaning platform III. - WATT? S1AIZRS AID BCILZR TIPIS; Tubes and headers are cleaned twioe a year by means of air-driven turbines. It has been found that cleaning can be done more effectively if cone dry rather than wet because the dust car. be blown out. If water were used, the loosened material would soon form a paste which-would be smear ed back on the tubes by the action of the cleaning turbine. Regardless of the dust which is produced in concentrations as high a6 30,35S,040 particles, ten microns or less ir. size per cubic foot of air, workmen prefer working in dry drums rather than ir. wet ones. light men (two on each turbine) are engaged in this cleaning operation which requires about twelve days a year. Men with an average service of fifteen years are assigned to this job from the Labor Department. The tenperature inside of the drums or headers is about 70 degrees Fahrenheit. In accordance with the usual prao- tice, men operating the turbines, inside the drum or header, work about ten minutos and are relieved for ten minutes by their co-workers who assist in handling the air hose in and out of the drum manhole. Respirators have been provided in most cases but are not always worn. The average dust produced while cleaning water-header6 and boiler tubes in samples taken from; Lower Platform, Front Water Header................18,306,048 part, peru, ft. In $2 Drum While Cleaning '..'ater Wall and Tubes.... 5,664,000 " " " Inside Manhole Drum #3 While Being Cleaned....... 28,320,000 " " " About 40'-i of the dust particles in the samples taken on the lower front water-header platform, while header was being cleared, were rounded, dark red in appearance under the Konimeter microscope, and about two microns in size; 50*! were opaque, more or less angular, and about five microns in size; 10% were crystalline, slightly angular, and over ten microns in size. About 65% of the particles in the sample taken insido 2 drum during clear.ir.7 were black, opaque, angular, less than two microns in size; ard about 15% were round, more or less opaque, over ten microns. The concentration of oust IISIII the drum during cleaning appears to decrease with the distance from EM 015k 60- the m n h o l e as is demonstrated by these counts in samples from Drum #2 (Riley Boil er) Location Particles per cu. ft. Inside Manhole................................................... About 6 ft Inside Drum................... .................... 11 " " " " 18 " " " " 24 " " " 19,257,600 4,078,080 2,265,600 1,585,920 1,132,800 The dust particles from inside the drum appear black, angular and were less than two microns in site. The dust freen these cleaning operations are supposed to be largely the results of metal corrosion and sediment (largely Oajcium Carbonate and Calcium Phosphate) deposited by the treated Boiler Feed Water. A petrographic examination of a sample of dust from the Front Water Wall Header was made by the United States Bureau of Mines Experiment Station at Pittsburgh, Pennsylvania, who reported: Quartz (SiOg).......................... Opaaue or Coated with Opaque Material.. Unia'entified Clay-like................. 1 per cent. 90 " " 9" " According to a chemical analysis of this same material made by a regular re finery' chemist using the method of Adolph Knopf, U.S. Public Health Service, the dust contained: Free Silica............ ;.............. 0.70 per cent. Combined Silica........................ 41.01 " " Although the analysis of the dust shows a low iVee silica content, the high dust concentrations found and the possibility tha+ at times such concentrations nay be higher than those found, demonstrate the desirability of wearing respirators re gardless of the kind of dust encountered. IX - FOUNDRY OPERATIONS During recent years considerable attention has been focused upon the health of foundry workers by the operation of the so-callod "Silicosis Racket" winch has ex tracted large sums of money from the Foundry Industry. It is difficult to isolate this type of work which gives rise to a very general exposure to dust which nay in volve all workers employed in the foundry. In many cases the worker is in such close contact with the duty atmosphere as to cause serious exposure. Much progress has been made in reducing the dustiness of our foundry operations and plans are now being considered which will further safeguard our foundry workers. The following is a brief outline of foundry dust producing operations: A -- POURING MOLTEN METAL INTO SAND MOULDS -- About 19--1/2 tons of metal are poured per "heat". Thirty-five men with an average service of twelve years spend about one and a half hours pouring and six and a half hours moulding per day, five days a week. Goggles, asbestos leggings and congress-type shoes are worn by the men handling the molten metal. About 60% of the moulding sand, which is the principal source of dust, is free silica (Si0 2 ). During the pouring operation the foundry air appears to be full of dust and smoke, however, samples taken during this work aver aged only 396,480 particles ten microns or less in size per cubic foot of air. Prac tically all of these dust particles appeared angular, crystalline under the Konimeter microscope and were about two microns or less in size. ,,_. A sample of dust from the top of the crane rail over the moulding floor was E PO 0155 0 -61- riven a petrographic examination by the U.S. Bureau of Mines Experiment Station in Pittsburgh, Pennsvlvaiua who reported 50/J quartz (SIO2 ); 15a Clay Kineral not ccbbpletely identified. Kaolinite is AlgC'3 .2 SiO 2 2E2J 5/ Calcite (CaCOj) and 305* Opaque. p. - "SEAEIKG OUT" CASTINGS - After pouring, the eastings are allowed to cool, then the moulds are liberally sprinkled with water froc a hose. The bands or clamps are removed and the flask is thrown over and broken open. The rough castings are pulled out, piled up end trucked to the Cleaning Room. "Shaking Out" is con sidered one of the serious occupational disease hazards encountered in industry and the dustiest operation in fouaderies but due to the thorough wetting and careful handling by the men, samples taken during the operation had an average of only 555,220 cusn particles ter microns or less per cubic feed of air. The impinger method would no doubt reveal much higher counts. About 98>i of the dust particles were slightly angular crystalline in appearance under the Earimeter microscope and were one micron or lesd' in size. "Shaking Out" is rather hot work, the men per spire freely so that it would be difficult to enforce the wearing of goggles and respireuors. Twelve men with an averpge service of eight years work on this job, eight hours per shift, five shifts per week. After the castings have been removed the moulding sand is again wetted and thoroughly worked over with a motor-driven sand cutter which is a series of revolv ing blades, similar to those on a lawn mower, operated by an electric motor, mounted on a rubber-tired four-wheeled carriage which moves back and forth over the moulding floor. Moisture tests are made and when these tests indicate 4.6 to 5.6 moisture the sand is considered ready for the moulders. During the operation of this sand cut ter, the operator is exposed to an average dust concentration of 1,529,280 particles zen microns or less per cubic foot. These particles were less than twe microns and were slightly angular crystalline in appearance under the Konimeter microscope. C. - CLEANING CASTINGS - Various methods ing on their size and shape. All of these methods produce v.-r.ich can be taken care of by exhaust ventilations, others ccrronly employed are? are used to clean castings more or less dust seme of cannot. The methods most depend (a) Preliminary Cleaning - Castings are brought from the moulding floor during the night and deposited in the Cleaning Room. The following c o m i n g the cores are knocked out. the sprues and gates are broken off and same scratch cleaning is done. This work produces considerable dust especially when the sand and old cores are shovelled through the .-rating into the car or bucket below (3,455,040 particles ten microns or less per cubic foot of air). Under the Konimeter microscope about 70JJ of the dust particles appear angular, crystalline, three microns or less in size; 20% were rounded crystalline, five microns in size and about were scale-like semi opaque with a reddish-brown tinge and over ten microns in size. Pulmosan Respirators have been provided but are not always worn by men doing this work. NO attempt has been made to control dust from preliminary cleaning although same study has been river, to the provision of a special air-tight roam with a grating flocr and a hopper underneath with a screw conveyer at the bottom to convey the debris to the disposal car or bucket and thus eliminate the dust-producing shovelling and handling. Under this plan exhaust ducts with a series of outlets around the top of the hopper carry off the dust. Air is also introduced into the room about a man's breathing level and the amount of air taken out is greater than that introduced so that a negative pres sure is maintained and a complete air change is made about every three minutes. (b) Tumblast - The Tumblast is a machine which combines tumbling with air blast- ?ron 400 to 150C pounds of castings are put into a drum which revolves about -- - -hey run from about 20 minutes to four hours, depending upon the type of ee sr.gs and cleanliness required. While the castings are being tumbled they receive EM001551 -62- L tz tZ a blast of #20 Steel shot through three 5/l6 inch nozzles under an air pressure of 85 pounds per square inch. This machine is operated by three men, with an average service of eight years, for a period of two and a half hours per man per day, five davs a week. Pulnosam Dust respirators are provided but are not always worn. A c ten-inch exhaust pipe has been installed at the top of the machine and a six-inch exhaust pipe over the screen. The suction on these exhaust pipes is said to be c about 2-l/2 inches water. Samples taken during the operation of this machine avexN- aeed 1,200,760 dust particles, ten microns or less in site, per cubic foot which in dicates that the dust control measures which have been provided are getting results although there is still room for improvement. About SB% of the dust particles ap tz pear quartz-like under the Konimeter microscope; about 60 are five microns or less in size and are angular crystalline in appearance; 40f* are ten microns or over in size, end rather rounded in appearance. There are also a large number of minute black metallic specks entirely too small and numerous to count accurately. xz (c) Sly Tumbling Kill - Cleans brass castings by a combinavi on of tumbling and air-blasting with -3 Sand Blest Sand and 85 pounds per square inch air pressure. The Kill holds from 103 to 1503 pounds of castings and cleans five loads a day. Two men , with an average service of 15 years, operate this mill which runs about five hours a cay. They wear Pulnosan Dust respirators and -oggles vcien opening the machine. This Kill is hooded with an 8-inch exhaust pipe having a 2-inch water suction, also a 10-inch exhaust pipe over the sand screen at the rear of the machine. Samples of dust taken during the operation of the Sly Tmr.tling Kill had as high as 2,492,160 particles ten microns or less in si2 e per cubic foot of air and an average of 1,295,344 particles per cubic foot. About 90/i of these dust particles were rounded crystalline in appearance under the Koniaeter microscope and two microns or less in tz size; 5% were black, opaque scale-like and 5% were rounded crystalline about five microns in size. (d) Tumbling Barrels - 36" x 42" Whiting Tumbling Barrels remove sand from cast tz ings. They hold free 1200 to 1500 pounds of castings per load and revolve at 10 R FM The castings are tumbled about two hours with about 700 pounds of one-inch unanneal ed cast malleable iron stars and jacks. An exhaust system with a 6-inch pipe through the trunnion having a suction of l-l/4 inches water. This suction has been found in adequate to give the desired results consequently the suction is to "be increased to 4-inches water. Samples taken during the operation of the Tumbling Barrels had an average of 1,345,022 dust particles ten microns or less in size per cubic foot of air. About 90^ of these particles were angular crystalline in appearance under the Koniaeter Kicroscope and three microns or less in size; about 1CZ were rounded semi crystalline, ten microns in size. There were also a few triangular-shaped opaque metallic particles. Three men, with an average service of twelve years, operate these tumbling barrels eight hours a shift, five shifts a week. Pulmosan Dust Proof respirators and goggles have beer, provided but are not always worn. The type of Tumbling Barrels being used has been condemned by a major conw pany because it is impossible to ventilate it properly. The holes in the end liners clog up when the barrel starts revolving, thus preventing circulation of air through the barrel. This condition has been remedied, in a new design now on the market, by c the use of two shells - an inner perforated and an outer solid shell. Both trun nions are hollow and are connected with the air chamber between the two shells. Air under pressure is introduced through one trunnion and exhausted through the other-. (e) Air-Blasting - Castings which cannot be tumbled due to their si2 e and fra gility are cleaned by air-blasting (85 pounds per square inch) with mixture of ap proximately half and half sand and #40 Steel Grit. Syracuse Core sand is used when 1 special finish is desired. There are three men, with an average service of three '' 'rs. or. this job who work 45 minutes of every hour, eight hours a shift, for one out of t.-.ree weeks. This work is done in a special tight air conditioned room EH001552 -63- while wearing a Sly Sand-blast Helmet supplied with outside fresh air provided by a special blower used for that purpose only. Samples taken inside the room while a casting was being air-blasted had an average of 3,738,240 dust particles ten microns or less per cubic foot of air. About 80% of these dust particles were sharply angu lar crystalline in appearance under the Konimeter microscope and three microns or less in site; 20 were rounded quartt-like crystals about ten microns in site. There were also a few rust-like scales and a large number of black metallic particles too minute and too numerous to be counted accurately. The silicosis hazard of this opera tion could be greatly reduced by the use of steel abrasives exclusively. (f) Rough Snagging Wheels - These machines are used for removing projections such as sprues, parts and gates from castings. There are two types of these wheels: the DOUBLE END using either 19-1/2" x 3" Carborundum and Vitrified or 24" x 2-1/?" Rednanol (Bakelite bound) Wheels; and the HORIZONTAL DISC Grinder having e 50" diameter vitrified wheel. These wheels are used by seven men having an average service of nine hours per shift, five shifts per week. Each wheel is hooded and has a four-inch suction pipe. There is an eight-inch suction pipe on the Horizontal Grinder, Goggles and respirators are provided but the latter are not always worn with the exception of the men on the Horizontal Grinders. Vitrified wheels ere run at a slower speed (1800 Rift) than the Bakelite Botad Wheels which operate at 3400 PJft. Samples taken during the operation of the Rough Shagging Wheels hac the fol lowing dust concentrations. Double End Snagging Wheels: Average Dust from Vitrified Wheels...;.. " n carborundum " ...... " " " Bakelite Sound Wheels. 3,653,280 particles per cubic foot 3,322,820 " " " " 2,662,080 " " " " Horizontal Disc Grinder; Average Dust from 50" Vitrified Wheel....... 2,124,000 particles per cubic foot The average cust produced by all the Rough Snagging Wheels was 2,322,820 particles, ten microns or less in size, per cubic foot of air. About 80% of the dust particles from the vitrified wheels appeared black angu lar opaque under the Eonimeter microscope and two microns or less in size; 20> an gular crystalline -about one micron or less. There were also a large number of black minute particles too small and numerous to count. The dust particles fbom the Hori zontal (Vitrified) wheel were approximately 90% angular, crystalline and 10% black opaque. All of these particles were about two microns or less in size. About 80% of the dust particles from the Bakelite bound wheel were black angular two microns or less in size; 25% were angular crystalline, less than one micron in size and about 15% were rounded crystalline about five microns in size. (g) Fine Snagging and Polishing Wheels - These wheels grind off small projec tions and remove rust from stock which has been in storage. There are three types: D0JELE 4" t. 14" POLISHING EMERY WHEELS -- Wheels after being made up are dipped in glue and then rolled in Alundum Grinding Grain, sizes 60, 80 and 120 mesh. DOUBLE DISC GRINDERS - 36" discs covered with 7/46 Cast Iron Grain or Silicon Carbide (an electric furnace product) and WIRE SCRATCH BRUSHES - made up with four 12" sections. Exhaust hoods with a suction of from three to five inches water, have been installed on the Polishing Wheels and Disc Grinders. There is NO hood on the VJire Scratch Brushes, These wheels are used by four men with an average service of two years. They wear goggles ar.d gloves but no respirators. Samples taken at face level during the aeration of tr.is equipment nac the follov.-ing average oust concentrations: E HO 01553 64 t Dust Produced by 36" Disc Grinder........... 1,416,000 particles per cubic foot " n n 1 2 " wire Scratch Brush..... 736,320 " " " " c " " " 4" x 14" Polishing Wheels.. 481,440 " " " " c c These cooperatively low dust counts indicate that the dust control measures which hare been*provided are either effective or the dust particles produced are over 30 c microns in size and were thus filtered out by the Konineter filter. Under the mi croscope dust particles from the Polishing Wheels appeared all round crystalline and c about one micron in size. About 401 of the dust particles produced by the Double Disc Grinder were sharply angular, opaque about three microns or less in size; 601 c were less angular crystalline about one micron in size. The dust particles produced by the Wire Scratch Erush were all rounded, crystalline and about one micron in size. There were no metallic particles in any c: the samples examined. Pew exhnust hoods have been installed on Wire Scratch Brushes because it has been generally assumed c that these brushes cic not produce any dust. This assumption, however, is untrue as one sample fron a wire brush at a Southern Refinery had as high as 6,663,520 par c t i d e s ten microns or less per cubic foot of air. c tz (h) Cone Grinding Wineels - These wheels are operated with compressed air are used to co miscellaneous grinding on eastings by four men, with an average ser vice of twelve years, about two hours a day on an average. The cones are 5-1/4" x 3-1/4" vitrified and produce an average cust of 1,969,120 particles ten microns or c less per cubic foot of air. About 801 of these particles are sharp angular crystal line. In appearance under the Konimeter microscope they are five microns or less in t size; 201 are round opaque but non-metallic in appearance and five microns or over ir. size. There are no hoods over these wheels and the operators wear no respirators. c Average Dustiness of Cleaning P.ocm Air - A series of five samples were n c <;aken between 5:30 and 9:40 A.ID to determine the average amount of dust in the air the cleaning rocm while the various cleaning operations were in full blast. An c other series of five samples were taken about 3:3C ?.11 in the afternoon after the room had been riven its regular elean-up. There was quite a difference ir. the amount c cf dust ir. the air during the morning (2,166,480 particles ten microns or less per cubic foot of air) and curing the afternoon toward the close of the shift (338,272 particles per cubic foot). About 951 of the cust particles in the evening samples c were angular crystalline in appearance and about two microns in size. There were a c few large semi-opaque or scale-like particles about 20 microns in size. About 981 of the cust particles ir. the morning samples were angular crystalline two microns or less ir. size and about 21 were round, crystalline over five microns in size. c A sample of cust from top of one of the larger Exhaust Ducts in the center of the cleaning room was given a petrographic examination by the U.S. Bureau of Mines Experiment Station at Pittsburgh, Pennsylvania and found to contain 40,1 Quartz (Si02), 201 Clay Mineral not completely identified; 401 opaque, D. - CORE MAI!IDG - A large number of cores are made by the Demmler Air rated Core Machine which uses a mixture of two-thirds sea sand, one-third river sand and one gallon core oil per 60 gallons sand. There are three sources of dust in the operation of this machine: c c c Ope c c (1) Shovelling Sand to fill the Machine Eopper..1,019,520 particles per cubic foot c (2) Blowing out Core-boxes...................... 736,320 (3) Blowing sard into the Core-Moulds.......... 755,200 c About 9Si of the dust particles from blowing out the core boxes are dark, ^racue in appearance cr.d about one r.icror. in size. The oust particles from blowing d into c.-.e core moulds ere angular crystalline less than one micron in size. EM001554 -65- Cores are "smoothed up" after being baked in the core oven by scratching off the rough edges with an old hacksaw blade. This operation produces an average of 906,240 dust particles ten microns or less in sire per cubic foot of air. About 98 of these particles are angular, crystalline in appearance under the Koniaeter mi croscope nd are less than one micron in sire. E. - SEPARATION OF BRASS FOUNDRY SEUKINGS - A Steinlein Separator, ing about 25 R s e p a r a t e s brass from about 100 pounds of skimnings an hour. The separator has a 4-inch exhaust duct to a 12-inch fan which produces a suction of about four inches water. Samples taken during the operation of this machine had an averare of 1,221,920 particles ten microns or less per cubic foot of air. About 95 of the cust particles in samples taken above the charging chute appeared opaque arruiar black in color under the Konimeter microscope and were less than one micron ir'size." >.bout 80> of the dust particles in samples from the trunnion were more crystalline and rounced..in appearance end less than one micron in sire. This was also true of the samples taken in front of the machine where the slag drops down into a bucket. The dus* particles in samples from the metal being discharged from the machine were about 50^ metallic in appearance about 50% angular crystalline. Both crystalline and opaque particles were about two microns or less in size. Six men, with an average service of seven years, take turns operating this machine which runs about two hours per day on an average. revolv X MASON'S OPERATIONS I, - TEARING CUT STILL FIRE 3 GEES - Two men with an average service of ten years, spend two days a month on an average tearing out slag-covered bottoms of crack ing coil furnace fire boxes. Temperature inside fire box is about 85F. The bot toms which are composed of fire brick are broken up with "Bull Point" Pneumatic chisels. Samples taken inside the fire box while this work was in progress had dust concentrations as high as 1,019,520 particles ten microns or less per cubic foot of air. These particles were glassy sharply crystalline in appearance under the Koni meter microscope. About 90% were five microns or less in size and 10% were over ten microns. The larger particles were semi-opaque. There were also a large number of round black opaque particles about one micron or less in size. After the bottoms had been broken up by the pneumatic chisels they are shovelled out through the fire box door and then reshovelled into trucks to be hauled away. This operation natural ly produces more dust than the breaking up inside the fire box. Although no wind was blowing samples taken at face level during the shovelling and loading had dust con centrations as high as 2,435,520 particles ten microns or less per cubic foot of air and an average of 1,345,200. Goggles but no respirators were worn by the workmen. II. - CHIPPING OR CUTTING CONCRETE - A large number of employees with an average service of three years, spend at least ten per cent, of their time dismant ling or cutting concrete structures with pneumatic chisels in the removal of old foundations, concrete supports and blocks and in cutting holes in walls and floors. Samples taken during the cutting or chipping of concrete had as high as 6,910,080 particles ten microns or less in size per cubic foot and a general average of 1.591,051 particles per cubic foot. All of these dust particles are slightly angular crystalline in appearance under the Konimeter microscope. About BS% of the dust par ticles "ere five microns or less in size; 10% between five and ten microns and about 5% over ten microns in size. In many cases neither goggles or respirators were worn by the workmen. Regardless of the rather low dust counts found, men engaged in chij>ping or cutting concrete should wear concrete due to the high silica content in the usual aggregate used in concrete. - - - - Cn-- .-.-ING IIORTAP FRO!. BET..TZ! BRICK - Chipping Mortar with pneumatic c.'.tsels from, setweer. bricks in walls of structures preparatory to weather-proofing is a --u_arly custy operation. Samples taker, curing this work had cust concentrations Ef!001 55 5 -66- L e as hi::r. as 2C,956,800 particles ter. microns or less per eubie foot of air and a general averare of 13,548,480 particles per cubic foot. All of these particles were c an ruler crystalline in appearance under the Konimeter microscope and about sir mi crons or less ir. size. There were also a countless number of minute reddish-gray c particles. This work was done by an outside contractor whose employees wore goggles but no cust respirators. c: IV. - CHUSH-iro FIRE BRICK - Fire bricks are crushed in a belt-driven Williamcs or a Kotor-driven Sturtevant Brick Crusher so that 80fl will pass through a 3/8" or a 150-nesh screen - much of it is powdered during the crushing. This material is then c mixed with fire clay, crushed asbestos anc cement to make "Ganister" which is used in tl tube sheet linings, packings or as mortar ir. building fire boxes of furnaces. Sarnies taken during the crushing of fire brick had dust coneentrations as high as tz 11,554.560 particles ten microns or less ir. size per cubic foot and a general average of 2,562,950 particles per cubic foot. Crushing new fire brick produces about six tines as nar.y dust particles (4,375,733 per cubic foot) as is produced when crushing tl old. used fire brick (736,320 particles per cubic foot). Under the konimeter mi croscope about 94^ of the dust particles produced by crushing new fire brick appear angular crystalline, one micron or less in size; about 5% are opaque over ten mi crons anc about 1% are dark opaque, scale-like about five microns in size. The dust particles frer. crushing old used fire brick are more rounded crystalline in appearance and are about five microns or less in size. An analysis of Alamo Fire-clay Brick, which is co-- .only used and was the new unused fire trick being crushed at the time our samples were taken, supplied by the manufacturers (Earbison-Walker Refractories Company) reports} ' Silica.................... 51.8 per cent. Alumina and Tinania....... 45.4 " " Cl Ferric Cxide............. 1.1"" Lime...................... 0.5 " " C Magnesia....... .......... 0. 3 " " Alkalies.................. 1 . 1 " " C Fire brick is crushed by two men assigned from the Labor Department, the aver age service of these men is about 14 years. Two to three tons are crushed per day. The total length of exposure per month depends upon the demand for crushed fire brick ar.d will vary from a general average of fifteen hours per man per month to as much as twelve hours a week. Goggles and K.S. A.Casfo dust respirators are worn. V. - SHAuIKC- TIRE BRICK 0!' ITIERY WHEEL - Fire brick are ground to a specified shape ar.d size on a 2" x 24" Carborundum (Grit 16, Grade 1, Bona 6C) Wheel which re volves 900 R?K. This wheel is almost completely enclosed by a hood which has a 4- ir.ch duct to a 24-inch motor-driven fan operating at 1750 RHi. , but this exhaust is evidently inadequate as samples taken while rounding off the edges of a fire clay fur nace block had a dust concentration as high as 4,078,080 particles ten microns or less ir. size per cubic foot of air. The general average was 2,001,658 particles per cubic foot. All of these dust particles were slightly angular and slightly opaque in appearance under the microscope and five microns or less in size. One man wearing goggles and a IL S.A. Comfo respirator, with about 15 years service, spends an average of about two dag/s a month shaping fire brick and blocks on this heel. vrI. - DIj.irJ.TLI.r j KASCirRY - Dismantling Masonry structures such as old boiler and still settings is a very dusty operation but was not included in this dust study as t.-.ere was no work of this type in progress at any of the plants at the time of our survey. E KO 01556 -67- - XI WOODWORKING OPERATIONS Woodworking operations, as performed in connection with the refining of pe troleum products and associated activities, are used in the production of patterns, bom shooks, containers, and construction or maintenance work. These woodworking operations produce more or less dust which is largely organic and although it may have some spores and hare an allergic effect on some individuals, it is not consider ed harmful. Mr. D. Harrington of the U. S. Bureau of Mines advises that the U. S. De partment of Labor in a recent bulletin indicate that workers breathing wood dust are far more definitely afflicted with tuberculosis than the general run of industrial workers. In large quantities, however, wood dust belongs in the "nuisance" class and nay also be an explosion hazard A. - BCi: SHOOT. KAKT7FAC7C22 - All pine lumber used in the manufacture of box shooks is "kiln-cried" and all gum lumber is "air-dried". Men work eight hours a shift, five shifts a week. (a) Hesawing - Band saws, twenty-five feet four inches in oircumf erence, re saw four-quarter arc: five-quarter lumber into 3/B-inch and l/2-inch shooks respec tively. Samples taken during this resawing had an average dust concentration of 155,760 particles ten microns or less per cubic foot of air when sawing pine and 995,864 particles per cubic foot when sawing gum. These l w counts indicate that the exhaust anc dust collecting system which has been provided is functioning. This exhaust system induces hoods over each saw with S-inch ducts to a belt driven fan with five-foot blades revolving 5500 RRi. About 60% of the cust particles in samples taken while resawing pine were crystalline, rather glass-like in appearance - prot>ably resin - under the Korimeter microscope and over ten microns in size; 40% were round with rough edges gray and opaque, five microns or less in size. About 80% of the cust particles from cutting g*m lumber were round crystalline seai-opaoue in ap pearance, five microns or less in size; 20% were aver five microns in size. Gum lum ber is resawed only about four days a month. (b) P.ipsawing - Rip saws. 14 inches in diameter cut ends from four-quarter gum l\zmber. An exnaust system has been provided with a hood over each saw and four inch metal ducts to a belt-driven far. with six-foot blades revolving 3500 RRi. Samples taken during this operation had an average dust concentration of 169,920 particles ten microns or less per cubic foot of air. All of these particles were angular crys talline semi-opaque in appearance under the Tonimeter microscope and about three mi crons in size. (c) Cut-Off Sawing - Saw four-quarter lumber to make box ends. About 85/1 of the time gum lumber is sawed, and 15% pine lumber is sawed. Samples taken while saw ing gum lumber had an average dust concentration of 877,920 particles ten microns or less per cubic foot of air. About 50% of these particles were round crystalline semi opaque, gray in oolor and from five to ten microns in size; 50% were slightly angu lar crystalline in appearance under the Konimeter microscope and three microns or less in size. There were also several very small black specks. The low dust count indi cates that either the particles were mostly over 30 microns in size and were thus filtered out by the porcelain filter or that the exhaust system was effective. (d) Planing - Planers or double surfacers resurface the four-quarter and five quarter lumber to give it the proper finish. There is an exhaust hood over each aa chine with an eight-inch metal duct to a belt-driven fan with six-foot blades revolv ing 3500 RTTi. Samples taken during the operation of planers or double surfacers had e general average dust concentration of 509,760 particles ten microns or less per eusic foot of air when planing pine lumber and 415,360 particles per cubic foot when planing gun lumber. Particles of oust produced while planing pine lumber were crystalline rather round ir. appearance under the Tonimeter microscope, about 75% were EM001 55 7 "68- t c fire nitrons or less in site; 25# were larger than two microns and rather opaque. Dust particles from planing gum lumber were round opaque in appearance and one mi cron or less in site. t e Dustiness of Shook Facton- Air - A series of fire samples were taken at fire strategic points to determine the average dust concentration of the factory air. t These samples gave an arerage concentration of only 141,600 dust particles ten mi crons or less per cubic foot of air which indicates that either the major portion of c the dust is over 30 microns in size or that the ventilation system is prcring effec tive. The latter is probably the more logical explanation although the excellent housekeeping is -undoubtedly an important factor. About 98# of the dust particles in the factory air samples were slightly angular crystalline in appearance under the t Konineter microscope and about five microns or less in size; 2# were round, opaque derk.gray_in color and two microns or less in size. e B. - ILT SAIDERS, SAID DISCS AND SPIIDL2S CP. CYLINDERS - This equipment is L t used for "squaring up" and smoothing surfaces of wooden patterns, cleaning and finishing barrel-heading and stares and general mill work in the Carpenter Shops. t Sanders are a notorious source of fine wood dusts. They are also contaminated with an appreciable amount of silica, if a sand-type of abrasive is used, consequently either hoods for the machines or respirators for the men engaged in operating these machines should be provided. We appreciate that it is rather difficult to properly t hpoaordticaulsaernldyerditsocprsaenvdeenrts.theOufrineattdeusnttiobneihnags cbaererniedcaalrleodundtobya tchaeseawbhrearseivea nmeamnbeern,-. C c gaged in the use of sanders suffered recurring respiratory' illness and ultimately death from nnetnonia. Eis'attacks of illness seemed to correlate with extended use cf the sanders. c c (a) Belt Sanders - An 8" x 28-1/2 ft. Belt Sander (Lightning Adalox Cloth l-l/2 - 40 X Grit Norton Abrasives) runs on an average of two hours per day and is c used by eight different men with an everage service of fifteen years. Samples taken while finishing #1 Pine lumber had a dust concentration as high as 15,519,360 par c ticles ten microns or less per cubic foot of air and a general average of 3,443,712 particles per cubic foot. About 90# of these particles were angular crystalline in c appearance under the F.onimeter microscope and five microns or less in size; 5# were over five microns in size; 5# were opaque scale-like, ten microns or less in Bize. There was no hood over this 6ander and the dust produced was thrown into the shop air. c c A 6 in. x 18 ft. Belt Sanding machine (#3 Production Cloth Minnesota Mining Company) runs on average from four to six hours a week and is used by four different men, with an average service of four years. This work was formerly done by hand on c a lathe with sand paper. Samples taken while finishing the outside of a barrel had an average dust concentration of 481,440 particles ten microns or less per cubic c foot. These particles were largely angular crystalline in appearance under the Koni neter microscope. About 5C# were five microns or less, and 50# were over five mi c crons in size. c (b) Sand Discs or Wheels - These disc6 run from 40# to 60# of the time are usually used by everybody in the shop in which they are located. Samples taken during the operation of sand discs or wheels had the following dust concentrations c and c c c c 1 t ^0 015 58 p '6 9 - No. Sise Abrasive (Dia.) Used Work Being Done I 7" #24 Sand Cleaning Paper Minn. heads Mining Co. Finished Barrels II 24" #1-1/2 Gar Squaring net Paper. Wood Minn. Min Pattern ing Co. III 30" IV 30" #40 Grit or Bristol Board. Gardner Ma chine Co. Smoothing off Pat tern #2 Garnet Net Back. Gardner Machine Co. Squaring Wood Pat tern Particles Per Cubic Foot 604,160 623,040 1,925,760 3,624,960 Characteristics of Dust ffcrticles (Sires and Per centages Estimated) _ Angular crystalline ' about 50% five microns or less and 5C larger than five microns. About 85/1 angular crys talline two microns or less; 5% cuartz-like r o m d e c about 10 mi crons in size. About 90% angular crys talline three microns or less; 10 opacue angular one micron in size. About 98jl semi-opacue, sand-like, one micron or less, 2% opaque 5 microns or over in size. The sand disc in No. I was used in a well ventilated cabinet connected to a 4S" motor driven fan by a 7-inch duot. The nen wore goggles and "Ccefo" respira tors. . The sand wheels in No. 11 and Jc, 111 had hoods with about 3-1/2 inches water suction connected to a 24" motor driven fan by 4-inch ducts. The men wore neither goggles nor resoirators. The wheel in No. IV had an exhaust hood with a 6inch duct connected to a 24-inch duct which in turn was connected with a 36-inoh mo tor driven fan. (c) Sand Spindles r Cylinders - Sand spindles or cylinders are used on an average of about two hours per mar per day. No hood or suction exhaust has been pro vided for this equipment. Ken using it do not wear goggles or respirators although the dust particles produced are more angular in appearance than those produced by sand discs or wheels. Samples taken during the operation of Sand Spindles or Cylinders had the fol lowing dust concentrations: Size (Dia. ) Abrasive Used Work Being Done Particles Per Cubic Foot 3" #Garnet Paper Cutting Inside 2,322,240 Gardner Machine Core Boxes Co. Characteristics of Dust Particles (Sizes and Percentage Estimated) About 60 quartz-like in appearance, ten mi crons or over in size; 40^ semi-opaque five microns or less in size. i E ^0 01 55 9 70- 375? PRO?7?13 BY SAMP SPITTLES CP CYLIITZ3S (Concluded) Site (Cit. ) Abrasive Used '.v'ork Being Done Particles Per Cubic root Characteristics of Dust Particles (Sites and Percentage Estimated) 3-1/2" =1-1/2 Garnet Paper Minn. Miming Co. Puttir.c Taper on Pattern. 877,920 About 90/1 angular crystailine two microns in size; ICTI opaque five microns or less in size. 1 C, - MRlilH? C7J2-S - Two typer cf saws are used in preparing lumber for making cranes for gasoline pumps and tankst (a) Band Saws - Samples taken during the operation of Band Saw had a dust concentration of 451,12? particles ter. microns or less per curie :oct of air. 21 of these dust particles were round, opaque in appearance under the Eonineter microscone and three microns or less ir. sire. (o' railroad Saws - Samples taken curing the operation of an IB" Railroad Sav. had a rust concentration of 1,954,80? particles ten nicrcns or less per cubic fort of sir. All of these particles were round, grayish opaque in appearance under tr.e V.cr.meter microscope and about fine microns or less in sire. There were also nu merous minute gray specks toe small to count accurately. XII - ROCK EXCAVATION Rock erea-ration is usually a oust producing operation which is limited to con struction activities in tr.e petroleum industry. The hasardousness of rock excavation detents entirely upon the nature of the rock being excavated, the length of exposure and the methods being followed. The principal sources of oust are rock drilling, lasting, mucking and handling of the rock. Cf these, drilling probably produces the reatest an cunt of dust. TRULir::: - The pneumatic rock drill operates essentially as a crushing evice v.-hich shatters the rock to a powder at the point of impact. According to heocore Idatch. of the harvard School of Public Health (II.Y. Inc. Bull. Yol. 15, Kc. 9 epo. 192=) tr.e particles of dust thus generated vary in size from one-quarter inch r larger oown to su'c-microscotic diameters. The dust is removed from the drill hole V SZT*SJT. cf air or water or a combination of the two introduced through the hollow drill steel,. Ir. the case of jack-hanm.er drilling a considerable amount of rock oust ejected fro:n tr.e hole falls back to be crushed further before it is removed again, Cuotinr Mr. hatch: "The amount of dust produced by a rock drill is surprisingly large - a jack-hammer, operating at the crver-all rate of 100 feet of drilling per day, actually crushes more than 200 pounds of rock in eight hours. Cf this, at least five per cent, is in the form of particles smaller than ten microns; hence, more than fifty grams of dust small enough to be air floated is generated per foot drilled. In terms of numbers of particles the figures are enormous - it has beer, found that a jack hammer produces as ^ cr.e sillier particles of hygienic interest during one minute of operation". *' tu U i (O o E MC C 1 5 6 C 71' E. - BLASTING - It is often said that M asting produces the greatest amount o'1 dust in rock-excavation. This statement is contradicted by some authorities who r*efer to~th*e fact that the blast dislodges a great deal of dust from the rock sur faces deposited there free earlier drilling operation in addition to that actually generated by it. Under this condition blasting is undoubtedly followed by a higher dust concentration than in the case when all the dust produce: by drilling is cap tured and corneye: to a remote collector so that only that actual!; generate: by tne explosion escapes into the Eir. * * it is undoubtedly true that if dr e" 2, of sone of the dust cor. the surfaces of the excavation and later be raised however, dust from this source is minimised if drilling is :cne wet, Lushed out particles teme to form -Sil v raised by the blasting operation. .Also, when good practice is loulowed. the face an: sides are wet down with water before blasting, and in mining work, there is a continuous water spray that is started onto the heading before the blast takes place sene bine after to help allay the dust and to wet down tr.e material, sc that fust raise: :ur:: mucking will be at a minimum. C. - MTTT.TVT- - The amount of dust produced by mucking and ether rock-handling operations varies greatly with the nature of the operation. On open excavation it is probably of little importance, but in confined sources as in tunnels an: nines the dust concentration associated with rock handling ay reach dangerous levels. 1. - T.T. C C M E T L - Methods for the control cf cust in rock excavation as suggested bv Mr. Hatch include; (a^ - Vet Trilling- and Wetting Town ock Walls ar.d Muck Piles - In general it nay be said that water is less effective against cuartz-bearing rock than against silica-free naterial such as lim6-stone. The usefulness of water is limited when freecing temperatures are encountered end it produces objectionable working conditions especially for overhead drill operators and is certainly to be avoided if a pneun c m a hazard exists. A fundamental objection to the wet method is that the cust is net reneved frem the scene of operation but simply suppressed near its source where it renains to be thrown into the air by a subsequent disturbance such as blasting. (h' - General Ventilation - The purpose of general ventilation is to dilute the dusty air w;tr sufficient clear, air to bring the concentrati on down to a satis factory level. Two precautions are required: 1st. - the fresh air itself must be free from cust and 2nd. - it must be properly distributed through the work ings to insure maximum mixing with the dust laden air. (c ) - Tust Exhaust Hoods or. Ibills and Other Mucking Operations end Local Sources of Tust - Effective dust control can be secured by means of a dust trap which surrounds the crill steel at the rock surface. The dust-laden air is captured as it emerges from the drill-hole by the inflow of clear air into the trap. To be effec tive, the inlet velocities must be great enough to prevent the outward movement of the dust and sufficient velocity must be maintained at all points within the trap to prevent settling and clogging. The collected dust is conveyed by the air-stream tnrouch hose arc piping to a suitable dust separator in which the air is freed from its oust load ar.d thus is discharged from the apparatus as clean air. Traps of dif ferent designs are required with various drilling operations and special supporting slices are necessary to hold the trap ir. proper alignment with the several operat-- -"r positions. (NCTI: The oust trap is satisfactory under many conditions, but again -m:er many ot.-.e.- conditions has r.ot proved satis faeppry, ESE) ~*0C15cl 72. The dust disperse durir.r Eucking, as v.-ell as thas ari ing, car te ccrtrclled ty local exhaust ventilation an: requires parafes. fren rock orill is: crere ap- (d ) - ~e r serai Prosessien By I'ear.s of Bessiratcrs ar.d Bcsitd-e - .-res sure Masks - An effersive resprrascr or a pes isise-press ure rask supplies ar. adecuase cuer.scsy of curs-free air prcrrices the wearer v.isls prcsecsicr v.r.er. is f: :s the face properly arc is worn corsiruously in dusty am.csph.eres. Bespirasrrs sr.i racks hrve a lerisirase place in m e fiels of silicosis ccrsrol. especially sc p m de pro session arair.ss infrequent unexpected cuss ccneensrasicns eus car.r.cs ce ras err ended as a suissisute for curs cor.srcl in consinuous operasions. t E E E t E E C C t C C C C C c c e c e c c c c c c c c : : 5c i 73- PART ni - MEASURES FOR REDUCTION OF THE DUST HAZARD h :v ca m t m z ~rr: itA".;.?: ei ?.zr::zr? - The q u a y ity of dust ihhaier iiiizizsi hv -ne emplovment of tr.ese four metnoes outlined by Or. M. .'.est cal Reccrd":- be . "Kedi "1 . Suppression of lust Mear It s Grinin, by nine use of exhaust draught, cus-. traps or water. The water has the advantage of a fly-paper effect on the silica particles, but the humidity created tends to faver infection by rrclcr.gir.g the life of pathogenic organises outside the body and facilitat ing tr.eir entrance into the body. with potential danger and should be regarded very cautiously and con servatively. "3, roper "ettllsticn. in connection with other methods. "4. Masks should be an ideal preventive measure but, unfortunately, nest cf the r.asks stopping tr.e dust alsc step the respiration, thus ne cessitating t.-.eir frequent renoval. They should be of an approved type, properly maintained, strictly supervised and their w e rigidly enforced." ie dc r.ct believe that the use of water would have any outstanding effects on raising tr.e humidity in nost of the dust producing operations ir. the Petreleus. In dustry, any nore then, for example, sprinkling one's lawn would have. We believe it retains tc be proved beyond doubt that the hinidificatior. of air actually favors bacteriological growth to the extent tr.at the incidence of disease fron pathogenic errasisns is raised significantly. There has been much discussicr. on this subject, but little has been proven. Theoretically, it nay be admitted that these organisms live longer in a moist atmosphere than in a dry atmosphere, but it is rather hazard ous reesening to conclude that for the reasons stated, the use of wet methods in dust control causes an increase in disease. ?r. Runnel's statement that most masks (we presume he means respirators) that stop oust also stop respirations, is a little strong. There are available today respirators that adequately remove dust without creating a resistance to breathing in excess of IE to 30 millimeters of water column, and the tendency of progressive manufacturers of such devices is to further lower the resistance. Men during the war actually did fighting while wearing respirato:y protective devices that hac. as much as 50 to 75 millimeters resistance. The resistance figures given for respira tors are measured at a rate of air flow of about three cubic feet a minute which is equivalent to the amount of air breathed by a person doing hard physical work. Oust Respirators and Air Masks - Respirators and nasks of various types have seen usee since tne days of the alchemists and are mentioned by Agricola, Ramazzini anc others. Control of the dust hazard by means of respiratory protective equip*, ner.t is effective, provided: (1) the protective equipment is efficient, ar.d S'S' ie (2) it is worn continuously. equipment is available, bus for continuous1 use,' cav* a E^CCl5c 3 er cs. r.i z ziei -74- . of control earner be depended upon to provide the firs- line c*' -e'-e-'e- ^ spect it may be likened to the use of personal i n d i c a t i o n as a V i ^ - - L against the spread of typhoid fever. Ihust resrirators and air -ak- "c* ~ have a definite place in the field of dust control, especial!-.- a / J r_e--e---- " measure, as a rears of protection on infrequent cust;- occupations and as' n " a " c - -0 ctr^er sore fusiasesi&l scchocs of prprrerri or.r ^ * . . .?-e?or' to the ^ = 1 Silicosis Conference, called tv the Ses-e-a- r- -'"-r ~~ 'estuary (lru7y to stucv specific chases of the si11 e*--- * sent suggestions for its solution, contained nan:* recextendtic^': v `s C I l i - " Z -~ tncrtttes cn tr.e sutject which hare beer, successful!-.- ennlovec unde- * -- conditions. briefly summarised measures for the control'of dust an" --"---e--- of preur:scricsts include: _.--.e-- ,-- A. - . i..-. --o>. - ..uc.t can be acccrrlished t.-rr-rr :e^ w.-.en new cuildirgs are cor.tenplated or when old build"--'' a-"-- '- -e- ~ - instance, structural projections and ledges nay be niniiired "tJ'trr-ent'the a-- - 1 v-.E." *V.c.-.--:j'i. ~.. ^ m i-m e la.t.er be relea--sed --"--o --'--ee aa--_oso'_-.'.-e#r-e* r. air cur-e I'' r' ' - - cz causec by travellers cranes, virratirr nac"*nc-- P-..-_lc _ V ~ ~ r-ve lrie reciprocating parts. Ere"Engineering Cc-.im.ee --.a. our present cay engineering and structural materials fc- 'll -',,'I ' n t elininatier, of innumerable ledges and projections without vr.;''-Vr":-5S'S\ E0WfTer' b.uilil=E -e-iors should be so c l r t r ^ i - ea-- - cteare. _y was.t.ng, hosme, vacuus cleeni-c o- '`s" - - operations nay be located over graters, beneath whilh e g - I * TM ^ - " i f : ; / " " ncvir.g tr.e materials and dust that fall throuch. .... " " ..... re" -- - .. cw-- ------ ICaturel ventilation sho--'" ........ . cc m terse cn.y an a d j e c t in renovir.g or reducing dust ir. f-e a - -s pcstime tc rave righ roofs in ore-stc-- *-- uc""-- es ~ vc "k - ---- a.-.a. ven-ila-ior, such methods cannot be re'-e- --- o- - - ~ r ^ - " " r-c-e-._c n dusty operations. Where mechanical ver.tilati-'vs-e-' a-* f f L .-let, care sro-.t be taken to creve-- -- 0- - ^T.,,_ ,, :*-t "J 5 *e=* a- ? " --:;e ffectirenes, of the s ^ t e T V . C. rootec enc partially enclosed processes to prevent such a'condition."*" c-0-eJ -- ----- : : c ::*!**: -- *-- --->S - Ihust;.* materials should be : f s e.=;, - 7J" . -'reE'--e^ or vent stack -- oerraos v.-ith a- ex-a" s- "'a tne air iis?1 c=` loading to be c a r r i e d ^ - ' - ; - r d u s t i " ; - u f t J i n i % " k?io." s.eC ^ StrtEe F'-rPSeS bUt Sh0'Jl<5 be i i. - yj-.zzzu-z. ztzTzzr'r- ized material - handling equipme-- can . . rJccessiJ e dust create: by nechan- ai.per.ee t e o ... .Lo.ph.r.'.. d'mi..... ' ^ ^ t i U my a. L u - i l a ^ / S f r e r ^ ^ e - p ^ ' * S" ersl or ,1! > "" T. - FHCVIIE k-zr bZrHCDS OF OPERA'~C\' - Wa-e- used ef'ffeeccttiivvepllyv;. * w`* ^a -e". Oil, and other liquids mav be L e c c c C C C t C C C C C C= m o c:5oi 75- 1. To suppress oust at the point of origin in such operations as rock-drilling;' handling, pulverizing, and rilling rock and ore; grinding metal on grindstones; abrasive-wheel cutting of granite and sandstone. 2. To prevent the re-dispersion of dust that has settled on the floors, walls, and other surfaces such as in the granite indus try and in foundries. g . - t e s t ::: zizzt.^zt: t o cor ?.CL TOST - When new machinery or other equipment is ccnterrlated. the manufacturer c n frequently he encouraged to include dust con trol features such as exhaust hoods as an integral part of the design and construc- Zmm " T'."----2 ZT`3AVSr SYS 7-- IS some operations, exhaus t systems may be installed to rencme oust at its pcirt cf origin. In many cases several small systems art rrefenable to a larger system. Any mechanical ventilation svs tern sho-ld be c&- signed tc meet at 1east the minimum requi.renents of local State laws or Industrial codes, or lacking such requirements, should be installed according tc the best ao- certed nractice. Dust Arresters - Pratision of dust arresters will prevent hazardous dusts from being circulated into other parts of the plant or into the neighborhood. The location of dust arresters is very important, particularly if cry types of arresters are used. Provision should be made for removal of the collected dust without its escape into the area where the arrester is located. ' ter ir.te ESTABLISH MAUrTELArCI AKT GCCT ECL'SI onatly the cheapest single method of controlling cus .and in hand. The best equipment in the world will not er,ts, foremen, and workers are careless end disorderly are advanced by the Conference Cccmi ttee: u - Good housekeeping .. Maintenance goes control dust if su it their work. Eight 1. If dust-tight equipment is installed it should be inspected at regular and frequent intervals and all defects should be cor rected as soon as they are detected. 2. Operations should be performed in a manner that will create the minimum amount of dust. 2. Use water under pressure where possible to clean building in teriors. 4. If practicable, combine water with air for cleaning purposos. All cleaning should be done, if possible outside of working I hours and men engaged in this operation should be provided with dust respirators. I 5. Vacuum cleaning removes dust without dispersing it elsewhere. I 6. Brushing is particularly adaptable for cleaning buildings of I the older type of construction. I 7. Low-pressure steam, can sometimes be used to advantage. i I t Cl 51 5 L -76- E . responsible cerscr. should be assignee t.-.e task o: supe. :s- c i-r maintenance and housekeeping activities. Among other thinrs he should nake tests iron tine to tine no make sure c that'tie use control program is achieving the desired re sults. c: J. - HLSPIHATTP.S - The Conference Committee was of m e unanimous cpin e: icr. that* ''dust elimination nest be given primary consideration in solving the sili cosis trcblem". nevertheless, when known methods of elimination are net airlicas.e Er cr are*ineffective, respirators should be provided as "a last resort an: or oc casional exposure or.lv.' notation cf personnel under these conditions is advisable.'' C 7me retort definitel;/ states that there will always be places where ether netmods will :*e inapplicable and ineffective, and respirators will be resumed for doing the c o.-/:. also the: there will he situations where respirators will be the primary mean; c: *--- .- the wv.orkmen. The scope cf good use of respirator: is osto iter e: ai:-- oevor.d trat cf occasional exposure. The need of rotating personnel letcrns on t.-.e t-.-te cf -.-cri: done an: the sutervis :cr. given the workmen. In some operatine, tr restirktoro are a: much a part of the workman's equipment as his tods. Certain!;.-, it cannot be eorcecte; that a terser, can -wear a respirator for several hours c cntinuouol" - but how r.anv -ebs are there that would require a terser, to keep t.-.e res- Er .rat: cm continuous..;- for an ertenoeo p e n o c o: time. he ccm.or. practice m tr.e C : major: y cf :r.:ustna_ occupations is m a t tr.e person is m t e m i n e n t l y expose: ano i: a:;or:e: man" ottortunitoes :`or e terioiic removal of the restiratev rrotec- .he two renerai tvtes of restirators which the Ccomittee ccr.siierei tr Er a . stirator that filter cu the dust tarticles. e: Supplied-air respirators in which cust-free air breathed by -- . the worker cones to him from an -uneontaminated outside source. c r ..o:t restrater manufacturers have submitted their devices for testir.r an: aptroval c : by the T. S. bureau of hies, end only these which have teen approved sr,culi be used. cr (a) Air-~urif--:r.r h t e j of Pesrirators - Cf tr.e air-purifying class, the type .test c crt-.cr.ly m e : is tr.e r.ecmar.ical filter respirator for mechanically-generated c: duct. These respirators rive no protection from gases and vapors. They generally cornet of half facepieces to whi ch are attacu.ed ar. exnauot valve and a fUterine medium, n a : remetes the dust from the inhaled air; some are equipped with a filter men--, that rer.cves pair.-, mists and seme fumes. They are limit in weicht and inex cr pensive. Filter pads must be changed at certain intervals, depending or. the concen tration of dust. Some types restrict the field of vision. The general requirements cr cf a safe an: suitable hee.tar.ical filter respirator are (1) adequate protection, (2) reasonable comfort and convenience, (3) an acceptable service life period of protec tion, (4) easy cleaning and strilist: on. ar.d (5) low cost of maintenance ir. good serviceable condition. Studies of mechanical filtration by fibrous materials mace by such agencies as tr.e Vnited States bureau of Mines (u. S.Bur. of Hines, Tech. Paper No. 394 (1925) and h.2. Pub. Health Bull. ho. 177 (1925)) ar.s the H a v a r d School of Public Health (Journ. Ir.dust. Hyg. 9,25 (1927)) revealed that filtering efficiency varies with the particle :::e arc tr.e amount of solid particulate matter retained; also that tr.e resistance to air flow.- varies with the amount of solid particulate matter retained and the rate of air flow. After all. the fundamental basis for judging the suitability of a respirater is w; h`er or not t`he amount of cus -- ^ V centitiens of practical use *c dreat.ee. This :: not related to ar.y p es req.i.-em er.ts for artreval J1 5 t i dusts of e following eize characteristics > per cent t! smalle r tt than 2. 63 nic tt o OD r 1 C 95i " tt n 90> " ft rt " 1.40 tt ft 60) " i " ft tt " 1.00 ' C. 65 tt 70 11 tt 60) " tt n " C. 72 ft tt 50i " r 0. 60 wi__ ce cr.e nicrcr raters. notec t-ti :i/25,CO: s eo per c cz of t:he dust of an inchi and 50 per o:* r.<teCsAe cr.arec-erir-: used cent f - - n ^ 5 sr.culc aecrovE.1 -re: net re user as is below anisters sc respi- Zz crier :: cocain the desired protection. it is essentia. cr.ac tr.e ;ace~- crecer cf the nesr.anice'I-filcer respirators fir the face cf tr.e wc.-ircnt snugly cut with a mir.nr.-um cf head-band tension. A. sijipie practical test, surges ted by bar Iter. I. crown cf the u. S. bureau of .'lines Lxoe Station in Pittsburgh, Penr.syl mania 'feur. Incust. mvc. pec. 1527 V cl. 19, :;o.2*. - cc ' that anyone can rur. tc cecernine v;r.e~r.er respirator facepiece is mal;ir.g a tigrrt seal. is to wear it IT. a hire, ccr.- cer.tratccr. cf coal dust. The time of the test can be shortened by bl o*.vir.r 5"rear. cf air ccr.tair.cr.g a high concentration. cf ccal dust around the edges cf tr.e facs- piece. The location ar.c approximate n arr.ituse of the leaks are s.tov.ee. by1 screaks cf real rust or tr.e part of the face covered :v the facepiece. Ar.ctr.er test, a c c c r c m tc hr. r r c 't. ccr.sists cf plugging the intakes o: the respirator ar.c tr.er. accentcm tc inr.ale. T.tis type cf test could well be supplemented ty the Coal curt test. in in - - -tided Air P.cscirators - Industrial processes such as pneumatic drilling,abrasire clsctinr and spray coating hare introduced atcr.ospheric conditions for which tr.e air-purifying type of respirators are net particularly suitable. Certain kinds cf pneumatic drilling are responsible for dust concentrations sc high that they would rapid!; cverloac a dust respirator. 7he operator of an acres ire blasting outfit r.-r*. be protected not only against the inhalation of air containing high concentra tions cf dust, but also against impact and abrasion of the head and shoulder by the recourcin acres ire and loosened abraded material. Spray coating is responsible fre quently for pollution of the surrounding atmosphere ty a combination of particulate matter mists that are liquid particles or a combination of solid and liquid par ticles and harmful manors resulting from the evaporation of the liquid vehicle of t.te coating used m the spray rum. Since these operations are carried out frequently in isolated places anc at different locations at various -imes, t: ey co not lend themselves always to general control measures. Therefore, supplie~ air respirators perform a definite service. The types ir. general use are those ~orr.or.i-. known as hose masks, air-line respirators, ar.c abrasive blasting respirators such fc sand blast masks, helmets, and hoods. Supplied-air respirators have the following advantages for routine r.on-enerrer.cy use over those of the air-puridying respirators such as gas masks, mechanicalfilter respirators and the combination of gas mask with a mechanical filter: 1. 330 resistance to inhalation. 2. Freedom from inward leakage of contaminated air. 2. Protection against all kinds of contaminants and ever, against at mospheres ceficient ir. oxygen w.ti ch will not poison or irritete tr.e skin. t 1 Cl it? I t 4. The Inflowing air reduces excessive perspiration anc tends to cocl the face. t t 5. '.."her. a hand-operated blower is used a second person is always present. (With an approved mask, provided the facepiece is tirht. the wearer can inhale enough air through the hose to es fc cape if the blower should ston). t: The Air-line nesriratcr consists of a tight-fitting facepiece, a loosely fit tins facer iece cr even a helr.ev or hood covering the head and err end ir.r dc"-- over t e C r.eck cr shoulders. The air supplied to these respirators has been largely that es time; fret, the conpressed air source used in the performance of the work, as ir. t ne "Vsinr air fron the ordina-- conpressed air system found ir. industry tc suptly respirators is r.ct to be indiscriminately recamended. These conpressed air systems are usually of the high pressure, internally lu bricated, rec iprocatir.g-c enrr essor type. The air supplied by these systens is ccntaninated frequently v.-ith malodorous constituents such as vapers. nists and products cf dec antes iticn cf the compressor Itw. bricant, slurs cf water, a m must from the pipe lime. All or most of these contaminants can be removed probably by some of the commercial air purifiers sold fer this purpose. A pres mure-reducing mechanism should be used also in the line to prevent any possibility of sudden accidental blasts of high-pressure air from injuring the lungs of the wearer of the respirator. With a compressor of this type there is always the possibility, however rare it may be in well-kept systems, of the generation c: carbon monoxide due to overheating cf the compressor lu bricant 'Jcur.Indust. hyg. 16,4c1 (1S3)). This danger can be minimized or eliminated by the use of temperature controls or carbon monoxide alarms cm t.te ccmtresscr which, cf course, should be so maintained as to pre vent the generation cf carbon monoxide, "The trend in suppliec-air respirators is to use special low-pressure, externally lubricated, positive-pressure air-supply devices. host of the objections to the high-pressure reciprocating-type compressor do not apply to an air-supply of this kind. Since these devices are r.ct ccnrnon in industry, however, it is usually necessary to purchase a special one for use with the respirator. Since air purifiers, pres sure-reducing mechanisms, and special compressor-control or alarm me chanisms are net necessary, the price of this respirator complete with air-supply device should not exceed that of the other type of respira tor without the air suptly system. "The use of a special air-ccnditioning unit to regulate the tempera ture and humidity of the air supolied to the respirator wearer is de c sirable. " ' ` The minimum air supply for a respirator designed to use all the ai psrstory needs at a high degree of efficiency is generally agreed among hygienists to =e at least four to six times the air breathed per minute. al class, resnrators with Iocs e-fittir.r facecseces, hoods, or helme ' _ ` I for res'^5"j**2. .As a s recuire ?9. -ere eir char those with tight fitting facepieces. There is sene difference of opinion among users of respirator as tc whether or net aec *- usttrm'.eenntis .srh. .oouulic oe. pn* roevices w- n. erecy _ *tmu_ee rw.ecas_recr. 1--2 ct_ at.#*_n v* ary ..--U.t.e_c_ f- l-- ocw -m C of air to nee-r variations in his requirements. It was the opinion of the National Silicosis Conference Ccrrittee that definite recommendations for ail situations cannot be made,but for many situations, and particularly where tight-fitting facepieces are used,' an adjustable flow is desirable and nay ever be necessary; alsc, cost workmen can learn to adjust the air properly. Cn the other hand fixed-flow procedures re quire a nininun ecount of instruction and supervision end are the cost cend'ue ire to safe-tv under all conditions. While Hose Masks and Air-Lis,e Bespiratcrs hare nany definite advantages the tree. cf trarel cf the wearer ts 1-- sited to the length cf tr.e nose, and ccrenents art carte: tc so-- e extent 'ey the h;ose. Manifestly, the air for the hese ar.s the shc.lt be fresh ant pure, but unf criunfitely this is net always sc. Abrasive Tlastins P.esrirator - Abrasive blasting respirators consist esseny cf a hoed, wim. windows, that fits loosely over the head end shculders and cesi r.ed tc withstand and protect the wearer's head, neck and shoulders fror. abraCt by the rebounding cf particles of sand or grit; and a supply of fresh air, at Lets six cubic feet per minute, bl own intc the hood. Cnly equipment which has net the 'nines States Bureau of Mines t est requirecents and wrier, is approved by the al and Safe-- ' Denarhr.erts shcu Id be used. 'c', Ascettance and Tse of Personal P.estiratcry Protection by Workmen - As stated in a paper by G. M. hints and '. 1. Fowler of tr.e Inites States Bureau of Mines (1.1. iris i;o.vl=3S) presented at the International Petroleur Expos ition and Congress, Tulsa. iklahoma, May 21 193c, selecting respiratory protective eouipnent is simple cornered with getting cer to wear it after it is supplied. Generally workmen will wear masks readily in places where they have seen others asphyxiated, or in some similar trouble, cut they are likely tc resist wearing protective equipment where the dust cannot be seen or where the fines and mist have no objectionable odor. There are three main reasons for such resistance: Pirst, inbred objection to ary new idea; Second, the feeling that the individual is a superman and can "take it" without protection; and. Third, the inconvenience of wearing the eouipnent. In a survey conducted among the employees of the Colgate-?almoliv&-Peet Can*pany by Mm. F. E. Wallner of that Company's Insurance Department, it was found that the men didn't like the disfiguring appearance of & "nuzzle" over their faces. This survey also disclosed that some workers objected to the respirator because they thought it made breathing difficult when the real trouble was that they were not breathing correctly. Breathing through a respirator should be done deeply and slow ly and after the proper habit has been acquired much discomfort nay be eliminated. Quoting Mr. Wallner: "Foremen should appreciate that the position of the straps that hold the respirator in place has much to co with comfort. They should learn v.hether the straps should be worn over the head or around the neck. Sore types have two straps, one to be worn around the neck, the Otr.er tro-^nd the head. " ..ccas.y tr.e most effective plan in retting f-espirators worn is first to "sell" 001 569 60- ` -- .v-- - " the superrisir^ personnel who is turn should "sell" the worker by education, possibly accesses!ed bv'strict anc fair supervision asd disciplise. Employees exposed to dust hazards recuirin: the wearisg of respirators should be convinced that it is essestial -.c sacrifice some cosfort asd dignity to avoid serious cases of disability asd suffer -_TZ, ive-- worker should hare his owr. respirator. It requires tise asd effort to adjust this trctectire device so it cossacts the face ssugly with a minimum of head- bast tension. It cassot be expected that the average workman will readjust a dif fer esc resetrator each day. Aiso, the psychological effect of usisg a respirator v.-crs treviously by astther workman is set usisporsast. Although he say sot say ar.y- tr.tr.:"about it, it is saturally revoltisg to cost men's prisciples of bodily seni- zaticr. to r.a-e to clasp over his face a device that has bees soakei with sweat as: dirt cf ar.cther sac's face asd isto which ose or core cec have breathed day after cay: It is toe truer, like us is:_ the other fellorw.v'*s too V-- 'cV. .re test sractice to nark ever-.- restiratcr so each wori cac tcer.ti. r rts ov.su {) 7se, hair.tesar.ee ar.d Care cf "est imators - Personal respirator;4 protective de vices s 4ust be sairrair.ee in a cosditicr substacsially the sace as wr.es received free the sarufacturer. Depending or the dersity cf the cust replaceable filters should be charred frequently to prevent their becccirg d e g r e e arc usually it i: desirable tc use a respirator without a faceiet. However, if they are cors id ere: recessa-- 4, the facelets should be charged ofter tc avoid skir irritation. A clear facelt gives the restiratcr e clear acseararce ar.d recoves ose objection to wearirr it. The Colgate-ralnolive-peet Cospa-- .4 fcurd that the habit of scce workers of reccvirg their respirators at intervals caused skir irritation. Everytime the;.- did this, dust settled cr. the surfaces that lay next to the worker's free arc irritating particles were transferred tc the skir when the device was replaced. It is, there fore, best to have the employee wear his respirator constantly while under exposure. In sate cases, ointments or petroleum jelly has helped to overcome the irritating ef.fert cf points that contact the skin. ~ fther? a considerable number of respirators are used, it is good practice tc have a "Hespirator P.ocr" with an attendant who issues the respirators and clears, sterilizes arc otherwise keeps thee ir. good condition. Hespiratcrs nay be cleansed by wasting arc brushing thee with an ar.tiseptic soap and ware water. They should be checked for damaged or improperly functicnin g parts such as rubber valve seats ar.d head-bands. If defective, these should be replacec by new parts. 1-- 7 C7 ll'crv JIE5" - It is essential that adequate medical control be ex ercised. Such ccr.trol should include the examination, prior to initial workinr on dusty jobs of the worker to insure that he is a suitable physical subject. This ex amination should preferably include X-ray examination of the lungs which permits closer control with subsequent X-ray tests as well as being a protection to the em ployer ir the event of ai$* later legal action. A worker, to be classed as physically suitable, should be in addition, de termined to be a nose-breather rather than a mouth-breather and the natural filter ing capacity of the hose should be found to be satisfactory. G. Lehmann (J. Ind.Eyg. 17,37 - 1935) indicates that the "Silicotic susceptibility of workers with poor na sal filtration is much greater than that of men with good nasal filters". He ad vises that jobs with a silicosis hazard be held only by men with good nasal filters" and that mouth breathers are an especially bad risk. He suggests that the "dust re taining capacity of the nose be used as ar. index of the individual's qual ification for working ir. a silicosis producing a-- .osphere". It is possible that Sternstein's tec.ir.icue for measuring nasal resistance ("Industrial Dusts - p.65) could be develop i--tc e simple proceoure for selecting men best edauted to cust exposure. i s wise to select *:cis7: l t E E E E E E E E E 81 for dusty Jots men who are past the age of 40 and not young nen Just taking up a trade. All workers engaged in harmful dusty operations should be periodically thor oughly re-examined, including X-ray tests. Particular emphasis should be placed on any indication of shortness of breath and chest pains P.erulations should be enforced concerning the time limitation of work of any einlovees involved in a dust producing operation. Such Company regulations concern ing sandblasting calling for a fixed six-north maximum period on such v.ork, after which a minimum six-month period away fran dust producing work should be followed more closely. Per protection from a legal tmgle, the worker should h-i given a final t'r.orcurh examinticr. including X-ray before being permanently transferred t: same other type cf work, laid off or discharged. CONCLUSION There is still a tremendous amount to be learned about pneumoconiosis and curt-producing operations. One thing, however, is certain -there is a rery definite tenter.cy to require compensation for industrial or occupational diseases. If these ccnpensaticn costs are tc be kept to a minimum and the health and safety cf workman are tc be promoted it will be necessary to make further studies and to promptly adept adequate precautionary measures. Many of these are now in effect, the others should be put ir. force as soon as possible. After years of study and direct contact with the lust Problem, Mr. Ian Harrington, Chief, Health and Safety Branch. United States Pureau of Mines, has cane to this conclusion (Png. 4 Min. Jour. March 1937 pps. 119-21, v.-ith which we are heartily in accord "Ir. the maze of uncertainties connected with almost all phases of the causation and diagnosis of dust disease, about the only really well-determined fact available is that breathing large quantities of dust 'or possibly cf certain dust) over extended periods is likely under some conditions to be harmful to health and that subsequent al leviation or cure is difficult or impossible. Therefore, it would seen to be logical to try to prevent dust formation thus preventing it fron harming workers through respiration or otherwise. Here is a real Job for the engineer, and little or no help can be expected in these vital functions from any agency except the engineers and operat ing officials. " "The most harmful of the ordinary dusts to breath is probably silica dust, but, on the other hand, not even free silica, supposed ly the most detrimental of the silica dusts, is harmful unless it is breathed, in considerable quantities and over extended periods. No toxeen being ever lived any considerable time on this earth of ours without breathing silica dust (free silica dust), yet by no means all of the people of the world have or have had silicosis. In other words, the quantity of dust taken into the respiratory organs is a controll ing factor in dust respiratory harmfulness. "One conmor,-sense answer is that any atmosphere in which dust is visible to the naked eye is certainly too dusty to be breathed with sE-fevy by human beir.gs, and the v/ise, farsighted, human employer will i_-- ediately sva.-v to decrease the dust content in any atmosphere .here -ust ir visible. After he has eliminated visible cust, there nav I "C CI 571 82 t still remain enough very sos.ll invisible dust to ctuse h a m to the health of those wno breath it, bur in any event if he has exerted suf ficient well-directed effort to renove the visible cust it is certain that ouch of the smaller invisible, and probably nost harmful dust has t also been removed, 'Manifestly. if dust is kept out of the air breathed by workers, the latter cannot succumb to exist disease of a respiratory character. " t In closing, we acknowledge with gratitude the support and cooperation of Dr. W. J. Dennc, C-eneral Medical director, Standard Cil Company (i:e;v Jersey) whose vision and active interest in Medico-Safety problems made this lust Study possible. We also appreciate the .advice and assistance rendered by: l Mr. W. ?. Ytnt, Director cf research t Development, Mine Safety Appliances Company, Pittsburgh, Pennsylvania. Dr. Leonard Greenburg, Executive Director, Division of Industrial Hygiene, Department of Labor, State of Mew York, New York, N. Y. Dr. ?.. Sayers, Senior Surgeon, U.S. Public Health Service Chief, Division of Industrial Hygiene, national Institute of Health, Washington, D.C. ' Mr. Daniel Harrington, Chief, Health and Safety Division Dnited States Bureau of Mines, Washing-ton, D. C. Dr. A. J. Lanza, Assistant Medical Director, Metropolitan Life Insurance Company, New York, N. Y. Mr. E. H. Barlow, Chief Engineer, Standard Cil Development Company, Elizabeth, New Jersey. Mr. E. N. Blakeslee, Department of Accident Prevention, Anerican Petroleum Institute, New York, N. Y. New York. K. Y. July Fifteenth 19 3 7 \ R. S. Bonsib P Chief Safety Inspector Standard Oil Co. (N. J. ) c: fc c e: c E *001 57 1