Document jymXMKapKGxzYvmN1pbkDzxKO
NEW Formula AK-972 July 30, 1979
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing for 1-gallon shipments only.
FORMULA
Raw Material
PMA 30 Filler AK-970 DuPont JCM Nalco 71D-5 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.08 95.34
4.48 .10
Lbs/Batcn
3.75 4400.00
206.75(23. 33 gal) 4.60
2106.25(253 gal)
100.00
6721.35
*Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 108 + 1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
- Blend ingredients in following order 1) Water/PMA-30 2) JCM 3) Nalco 4) Filler AK-971 5) Mix until Ready Mix is smooth - pumping viscosity should be 520 + 20.
WORKING CONSISTENCY
Specifications for Paste
- Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (520 + 20)
For machine tools, add 4 gallons I^O (470 + 20)
PH WORKING PROPERTIES Specifications
8.0 - 9.0
- Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
HCF:ps
Continued on Page 2 ... . SGP 0017518
BONDING PROPERTIES Specifications
CRACK RESISTANCE Specifications COLOR Specifications
NEW Formula AK-972 July 30, 1979 Page Two
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90% fiber tear when delaminated.
- Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better.
- White Dried compound shall match color of standard sample.
HCF:ps
SGP 0017519
June 18, 1980 Supersedes Formula AK-972 dated 7/30/79
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping , topping and texturing .
FORMULA
Raw Material
PMA 30 Filler AK-970 DuPont JCM Nalco 71D-5 * Water
'
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.08 95.34
4.48 . 10
Lbs/Batch
3.75 4400.00
206.75(23. 33 gal) 4.60
2106.25(253 gal)
100.00
6721.35
*Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 108+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order 1) Water/PMA-30 2) JCM 3) Nalco 4) Filler AK-970 5) Mix until Ready Mix is smooth - pumping
viscosity should be 520 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (520 + 20)
For machine tools, add 4 gallons I^O (470 + 20)
PH
WORKING PROPERTIES Specifications
8.0 - 9.0
- Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
-/ denotes change. CWL:ps
Continued on Page 2 ... .
SGP 0017520
October 30, .1980 Supersedes Formula AK-972
dated 10/13/80
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing."
FORMULA
Raw Material
Proxel CRL Filler AK-970 DuPont JCM Nalco 71D-5 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.109 95,311
4.48 .10
Lbs/Batch
5,04 4400.00
206.75(23.33 gal) 4.60
2106.25(253 gal)
100.00
6722,64
*Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 108 + 1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
- Blend ingredients in following order 1) Water/Proxel CRL 2) JCM 3) Nalco 4) Filler AK-970 5) Mix until Ready Mix is smooth - pumping viscosity should be 520 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of pastemay be added to adjust.
Birabender (520 + 20)
For machine tools, add 4 gallons H0 (470 + 20)
pH 8.0 - 9.0
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
-/ denotes change. BGRrps
Continued on Page 2 ... .
SGP 0017521
April 15, 1981 Supersedes Formula AK-972 dated 10/30/80
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping , topping and texturing .
FORMULA
Raw Material
Proxel CRL Filler AK-970 DuPont JCM Nalco 71D-5 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.11 95.35
4.44 .10
Lbs/Batch
5.2 4444.00
207.00 (23.26 gal) 4.7
1950.0 (234 gal)
100.00
6611.8
*Approximately
lbs/100 lbs. of active ingredients (this may vary
+ 8 gallons per batch.
**One batch yields 106 + 1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order 1) Water/Proxel CRL 2) JCM 3) Nalco 4) Filler AK-970 5) Mix until Ready Mix is smooth - pumping
viscosity should be 55 0 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (550 + 20)
For machine tools, add 4 gallons H20 (420 + 20)
PH WORKING PROPERTIES Specifications
8.0 - 9.0
- Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
-/ denotes change. BGR:ps
Continued on Page 2 ... .
SGP 0017522
April 20, 1981 Supersedes Formula AK-972 dated 4/15/81
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing.'
FORMULA
Raw Material
Proxel CRL Filler AK-970 DuPont JCM Nalco 71D-5 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
P rcent
.11 5.35 4.44
.10
Lbs/Batch
5,2 4444.00
207.00 (23.26 gal) 4.7
1950.0 (234 gal)
-/ 100.00
6610.9
Approximately
lbs/100 lbs. of active ingredients (this may vary
+ 8 gallons per batch.
**One batch yields 106 + 1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order 1) Water/Proxel CRL 2) JCM 3) Nalco 4) Filler AK-970 5) Mix until Ready Mix is smooth - pumping
viscosity should be 55 0 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (550 + 20)
For machine tools, add 4 gallons H20 (420 + 20)
pH 8.0 - 9.0
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
-/ denotes change. BGR:ps
Continued on Page 2 ... .
SGP 0017523
December 1, 1981 Supersedes Formula AK-972
dated 4/20/81
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing.'
FORMULA
Raw Mater al
Proxel CPL Filler ** DuPont JCM Nalco 71D-5 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.11 95.35
4.44
. 10
Lbs/Batch
5.2 4444.00
207.00 (23.26 gal) 4.7
1950.0 (234 gal)
100.00
6610.9
*Approximately 42 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 106 + 1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
- Blend ingredients in following order
1) Water/Proxel CRL 2) JCM 3) Nalco -/ *** 4) Filler AK-970 or AK-974 5) Mix until Ready Mix is smooth - pumping
viscosity should be 55 0 + 20.
WORKING CONSISTENCY
Specifications for Paste
- Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (550 + 20)
For machine tools, add 4 gallons H20 (420 + 20)
pH 8.0 - 9.0
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
-/ denotes change. BGRrps
Continued on Page 2 . ,
SGP 0017524
February 25, 1982. Supersedes Formula AK-972 j dated 12/1/81 i
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping , topping and texturing .
\
FORMULA
Raw Material
Proxel CRL Filler *** DuPont JCM Nalco 71D-5 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.11 95.35
4.44 . 10
Lb.c /Batch
5.2 4441.00
207.00(23.26 gal) 4.7
1950.0 (234 gal)
100.00
6610.9
*Approximately 42 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 106 + 1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
- Blend ingredients in following order 1) Water/Proxel CRL ' 2) JCM 3) 'Nalco
_/ *** 4) Finer AK-974.
5) Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (550 + 20)
For machine tools, add 4 gallons H20 (420 + 20)
PH 8.0 - 9.0
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
-/ denotes change. HCF:ps
Continued on Page 2 ... . SGP 0017525
August 20, 1982 Supersedes Formula AK-972
dated 2/25/82
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing."
FORMULA
Raw Material
Proxel CRL Filler *** DuPont JCM / **md-76 * Water
Function
Preservative Filler Adhesive Defoamer Solvent
RM Spec
185 125
Percent
.11 95.35
4.44 . 10
Lbs/Batch
5.2 4444.00
207.00(23. 26 gal) 4.7
1950.0 (234 gal)
100.00
6610.9
*Approximately 42 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
-/ One batch yields 106 + 1 five-gallon pail Ready Mix Joint Compound at 02 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
-/
- Blend ingredients in following order 1) Water/Proxel CRL 2) JCM
-/ 3) MD-76 -/ *** 4) Filler AK-974.
5) Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (550 + 20)
For machine tools, add 4 gallons J^O (420 + 20)
PK 8.0 - 9.0
WORKING PROPERTIES
Refer to Plant Testing Procedure No. 33.
Specifications
Compound shall be plastic, buttery working end
free of any coarse, gritty or undispersed
particles. Material shall be free from lumps
due to incomplete mixing,
-/ **Nalco-71-D-5 may be substituted at equal loading.
-/ denotes change.
Contin :-d on Page 2 ... .
HCF:ps
SGP 0017526
\
AKRON HEW YORK PLAN? FOT
iMnwyw m
hwmw
READY MIX FILLER - AK-973
July 8, 196ii
Suporcedcs 'AE-973
Dated June 19. 0.c.-y-
DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound "* 1&iY-j., *'* ;r-\
FORMULA
RAW MATERIAL
SOURCE
R . Vu SPEC. f
Natrusol 250 HR
Mica JP 80-P Asbestos 7HF-9 Cloy ASP - 100 Limestone
(fine grinds
Hercules Pov;der Bassett Mien Co. Phillip Carey Co, Mineral & Chem. Co. Thompson-Weinraan
11 9
13
0.30 10.00
iw5o
10.00
75.20
100.00
. #,
Jo i'.oo i3c U00 3008
io o u
ooo
-Xi
WORKINO CONSISTENCY - Refer to Plant Testing Procedure Ro. 32*
Sue o 5. f 5 c a t ions:
Maximum
N5.nirr.TY>:
Average
62 56
$9
jORKIRO PROPERTIES - Refer to Plant Testing Procedure Ro. 33
Specifications: Filler shall be vory heavily bodied and peeress fair plasticity. It shall be free of any coarse, gritty or undispersod particles.
COLOR Whit
Specifica tion Dried compound shall match eoloi* of standard ear ,ie.
Roto:
A wet mix of the filler shall bo prepared according to For'mul
No. AK-976 at least twice a day or with every 6th cr ?th batch of filler rnanufactured. ?hi3 prepared mix shell be tea
ed end shall meet all the specifications required of Ready
Mis Joint Compound - Formula ITo; AR-976.
SGP 0017527
October 2, 1964 Supercedes AK-972 Dated July 6, 1964
AKBON, I7EW YORK PLANT FORMULA
READY MIX FILLER AK-972
DESCRIPTION OP PRODUCT - Filler for Ready Mix Joint Compound AX-976.
FORMULA
RAW MATERIAL
SOURCE
R. M. SPEC.
Natruool 250 HR (fine
- grind) Hercules Powder
0.30
if
Mica JP 80-F Asbestos 7RP*9
Hassett ffl.ca Co.
11 12.0
Phillip Carey Co.
9 4*o
Clay ASP - 100
Mineral & Chem. Co. - 10.00
"/ Limestone
Thompson-Weinman
13 J2*2-
100.00
#/BATCH
12.0 430.0 160.0 400.0 2948.0
4000.0
WORKING CONSISTENCY - Refer to Plant Testing Procedure No
SpeciflentIons:
Maximum
Minimum
Average
54 44
49
WORKING PROPERTIES Refer to Plant Testing Procedure No. 33*
Specificationst Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undlspersed particles.
COLOR - White
Specificatlonsa Dried compound shall match oolor of standard sample.
Notes
A wet mix of the filler shall be prepared according to Formula No. AK-976 at least twloe a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be test ed and shall meet all the specifications required of Ready
Mix Joint Compound - Formula No. AK-976.
-/ Indicates change in this re-issue.
SGP 0017528
SGP 0017517
AKRON FORMULA #972 ASBESTOS CONTAINING PRODUCTS