Document jyJVMG7Qpq42vOMN50qvVmN9k

TLVs Threshold Limit Values for Chemical Substances and Physical Agents in the Workroom Environment with Intended Changes for 1978 ! sc 16110 LAM024961 Copyright 1978 by American Conference of Govern mental Industrial Hygienists. The American Conference of Governmental Industrial Hygienists will welcome requests for permission to re publish or reprint these Threshold Limit Values. Re quests for such permission should be directed to the Executive Secretary, P.0. Box 1937, Cincinnati, Ohio 45201. PRICE EACH 1-49..............................................................................$1-50 50-199......................................................................... 1-25 200-999...................................................................... 1 10 1000-4999 ........................................................................75 5000 or more................................................................... 65 Documentation of the Threshold Umit Values for Sub stances In Workroom Alr.c A separate companion piece to the Chemical TLVs is issued by ACGIH under this title. This publication gives the pertinent scientific information and data with reference to literature sources that were used to base each limit. Each documentation also con tains a statement defining the type of response against which the limit is safeguarding the worker. For a better understanding of the TLVs it is essential that the Docu mentation be consulted when the TLVs are being used. Information concerning the availability of copies of the Documentation of the Threshold Limit Values for Substances in Workroom Air should be directed to the Executive Secretary, ACGIH (third edition, fourth print ing. 1978, $20.00). TLVsf Threshold Limit Values for Chemical Substances in Workroom Air Adopted by ACGIH for 1978 sc 16111 LAM024962 1978 TLV AIRBORNE CONTAMINANTS COMMITTEE Hervey B. Elkins, Ph.D., Chairman Charles E. Adkins Mary 0. Amdur, Ph.D. Hector P. Blejer, M.D. Paul E. Caplan, P.E., M.P.H. Paul Gross, M.D. James W. Hammond John W. Knauber, M.P.H. Jesse Lieberman, P.E. Trent R. Lewis, Ph.D. Keith R. Long, Ph.D. Frederick T. McDermott Floyd A. Madsen Walter W. Melvin, Jr., M.D., Sc.D. Leonard D. Pagnotto, Secretary Ronald S. Ratney Meier Schneider, P.E., C.I.H. Richard D. Stewart, M.D. Herbert E.Stokinger, Ph.D. Vera F. Thomas, Ph.D. William D. Wagner Elizabeth K. Weisburger, Ph.D. David H. Wegman, M.D. CONSULTANTS E. Mastromatteo, M.D. James F. Morgan Marshall Steinberg, Ph. D. Theodore R. Torkelson, Sc.D. Ralph C. Wands Mitchell R. Zavon, M.D. Any comments or questions regarding these limits should be addressed to: Executive Secretary American Conference of Governmental Industrial Hygienists P.O. Box 1937 Cincinnati OH 45201: (513)825-0312 TABLE OF CONTENTS Chemical Substances Page Preface........................................................................... Threshold Limit Values and Short Term Exposure Limits........................................................................ Radioactivity................................................................. Mineral Ousts............................................................... Nuisance Particulates.................................................. Notice of Intended Changes........................................ Appendices A. Carcinogens....................................................... B. Substances of Variable Composition............. C. Mixtures: Calculation of TLVs......................... D. Excursions Time-Weighted Average.............................. Peak Concentrations.................................... E. Nuisance Particulates....................................... F. Asphyxiants....................................................... G. Conversion of Particle Count to Mass............ 2 9 31 31 32 33 36 43 44 48 49 50 50 50 Physical Agents Preface........................................................................... Threshold Limit Values Heat Stress............................................................... Ionizing Radiation.................................................... Users........................................................................ Microwaves.............................................................. Noise......................................................................... Impulsive or Impact Noise...................................... Ultraviolet Radiation................................................. Notice of Intended Changes......................................... Notice of Intent: Light and Near-Infrared Radiation.......................... Airborne Upper Sonic and Acoustic Radiation...... Agents Under Study................................................. 55 56 65 65 81 82 83 86 89 90 93 94 1 Sc I6I12 LAM024963 PREFACE CHEMICAL CONTAMINANTS Threshold limit values refer to airborne concentra tions of substances and represent conditions under which it is believed that nearly all workers may be repea tedly exposed day after day without adverse effect. Be cause of wide variation in individual susceptibility, how ever, a small percentage of workers may experience discomfort from some substances at concentrations at or below the threshold limit; a smaller percentage may be affected more seriously by aggravation of a pre-exist ing condition or by development of an occupational ill ness. Tests are available (J. Occup. Med. 15: 564, 1973; Ann. N.Y. Acad. Sci., 151, Art. 2: 968,1968) that may be used to detect those Individuals hypersusceptible to a variety of industrial chemicals (respiratory irritants, he molytic chemicals, organic isocyanates, carbon disul fide). Three categories of Threshold Limit Values (TLVs) are specified herein, as follows: a) Threshold Limit Value-Time Weighted Average (TLV-TWA) -- the time-weighted average concentration for a normal 8-hour workday or 40-hour workweek, to which nearly all workers may be repeatedly exposed, day after day, without adverse effect. b) Threshold Limit Value-Short Term Exposure Limit (TLV-STEL) -- the maximal concentration to which workers can be exposed for a period up to 15 minutes continuously without suffering from 1) irritation, 2) chronic or irreversible tissue change, or 3) narcosis of sufficient degree to increase accident proneness, impair self-rescue, or materially reduce work efficiency, provid ed that no more than four excursions per day are permit ted, with at least 60 minutes between exposure periods, and provided that the daily TLV-TWA also Is not exceed ed. The STEL should be considered a maximal allowable concentration, or ceiling, not to be exceeded at any time during the 15-minute excursion period. STELs are based on one or more of the following criteria: (1) Adopted TLVs including those with a "C" or `'ceiling" limit. (2) TWA-TLV Excursion Factors listed in Appendix D. (3) Pennsylvania Short-Term Limits for Exposure to Air- 2 borne Contaminants (Penna. Dept, of Hlth., Chapter 4, Art. 432, Rev. Jan. 25, 1968). (4) OSHA Occupational Safety and Health Standards, 40 FR 23073, May 28, 1975. (5) NIOSH criteria for recommended standards for occupational exposure to specific substances. The TWASTEL should not be used as engineering design criterion or considered as an emergency exposure level (EEL). c) Threshold Limit Value-Ceiling (TLV-C) -- the con centration that should not be exceeded even instantan eously. For some substances, e.g., irritant gases, only one category, the TLV-Ceiling, may be relevant. For other substances, either two or three categories may be rele vant, depending upon their physiologic action. It is im portant to observe that if any one of these three TLVs is exceeded, a potential hazard from that substance is pre sumed to exist. The TLV-TWA should be used as guides in the con trol of health hazards and should not be used as fine lines between safe and dangerous concentrations. Time-weighted averages permit excursions above the limit provided they are compensated by equivalent ex cursions below the limit during the workday. In some instances it may be permissible to calculate the average concentration for a workweek rather than for a workday. The degree of permissible excursion is related to the magnitude of the threshold limit value of a particular substance as given in Appendix D. The relationship be tween threshold limit and permissible excursion is a rule of thumb and in certain cases may not apply. The amount by which threshold limits may be exceeded for short periods without injury to health depends upon a number of factors such as the nature of the contamin ant, whether very high concentrations -- even for short periods -- produce acute poisoning, whether the effects are cumulative, the frequency with which high concen trations occur, and the duration of such periods. All-fac tors must be taken into consideration in arriving at a decision as to whether a hazardous condition exists. Threshold limits are based on the best available infor mation from industrial experience, from experimental human and animal studies, and, when possible, from a combination of the three. The basis on which the values are established may differ from substance to substance; protection against impairment of health may be a guid ing factor for some, whereas reasonable freedom from sc 16113 LAM024964 irritation, narcosis, nuisance or other forms of stress may form the basis for others. The amount and nature of the information available for establishing a TLV varies from substance to sub stance; consequently, the precision of the estimated TLV is also subject to variation and the latest Documentation should be consulted in order to assess the extent of the data available for a given substance. The committee holds to the opinion that limits based on physical irritation should be considered no less bind ing than those based on physical impairment. There is increasing evidence that physical irritation may initiate, promote or accelerate physical impairment through in teraction with other chemical or biologic agents. In spite of the fact that serious injury is not believed likely as a result of exposure to the threshold limit con centrations, the best practice is to maintain concentra tions of all atmospheric contaminants as low as is prac tical. These limits are intended for use in the practice of industrial hygiene and should be interpreted and applied only by a person trained in this discipline. They are not intended for use, or for modification for use, (1) as a relative index of hazard or toxicity, (2) in the evaluation or control of community air pollution nuisances, (3) in estimating the toxic potential of continuous, uninterrupt ed exposures or other extended work periods, (4) as proof or disproof of an existing disease or physical con dition, or (5) for adoption by countries whose working conditions differ from those in the United States of America and where substances and processes differ. Ceiling vs Time-Weighted Average Limits. Although the time-weighted average concentration provides the most satisfactory, practical way of monitoring airborne agents for compliance with the limits, there are certain substances for which it is inappropriate. In the latter group are substances which are predominantly fast acttag and whose threshold limit is more appropriately based on this particular response. Substances with this type of response are best controlled by a ceiling "C" limit that should not be exceeded. It is implicit in these definitions that the manner of sampling to determine noncompliance with the limits for each group must differ; a single brief sample, that is applicable to a "C" limit, is not appropriate to the time-weighted limit; here, a sufficient number of samples are needed to permit a time-weighted average concentration throughout a com plete cycle of operations or throughout the work shift. Whereas the ceiling limit places a definite boundary which concentrations should not be permitted to exceed, the time-weighted average limit requires an explicit limit to the excursions that are permissible above the listed values. The magnitude of these excursions may be pegged to the magnitude of the threshold limit by an appropriate factor shewn in Appendix 0. It should be noted that the same factors are used by the Committee in determining the magnitude of the value of the STELs, or whether to include or exclude a substance for a "C" listing. "Skin" Notation. Listed substances followed by the designation "Skin" refer to the potential contribution to the overall exposure by the cutaneous route including mucous membranes and eye, either by airborne, or more particularly, by direct contact with the substance. Vehicles can alter skin absorption. This attention-calling designation is intended to suggest appropriate measures for the prevention of cutaneous absorption so that the threshold limit is not invalidated. Mixtures. Special consideration should be given also to the application of the TLVs in assessing the health hazards which may be associated with exposure to mix tures of two or more substances. A brief discussion of basic considerations involved in developing threshold limit values for mixtures, and methods for their develop ment, amplified by specific examples are given in Ap pendix C. Nuisance Particulates. In contrast to fibrogenic dusts which cause scar tissue to be formed in lungs when in haled in excessive amounts, so-called "nuisance" dusts have a long history of little adverse effect on lungs and do not produce significant organic disease or toxic effect when exposures are kept under reasonable control. The nuisance dusts have also been called (biologically) "inert" dusts, but the latter term is inappropriate to the extent that there is no dust which does not evoke some cellular response in the lung when inhaled in sufficient amount. However, the lung-tissue reaction caused by in halation of nuisance dusts has the following characteris tics: (1) The architecture of the air spaces remains in tact. (2) Collagen (scar tissue) is not formed to a 5 sc I6I14 LAIVI024965 significant extent. (3) The tissue reaction is potentially reversible. Excessive concentrations of nuisance dusts in the workroom air may seriously reduce visibility, may cause unpleasant deposits in the eyes, ears and nasal pas sages (Portland Cement dust), or cause injury to the skin or mucous membranes by chemical or mechanical action per se or by the rigorous skin cleansing proce dures necessary for their removal. A threshold limit of 10 mg/m3, or 30 mppcf, of total dust < 1% quartz, or, 5 mg/m3 respirable dust is rec ommended for substances in these categories and for which no specific threshold limits have been assigned. This limit, for a normal workday, does not apply to brief exposures at higher concentrations. Neither does it apply to those substances which may cause physiologic impairment at lower concentrations but for which a threshold limit has not yet been adopted. Some nuisance particulates are given in Appendix E. Simple Asphyxiants -- "Inert" Gases or Vapors. A number of gases and vapors, when present in high con centrations in air, act primarily as simple asphyxiants without other significant physiologic effects. A TLV may not be recommended for each simple asphyxiant be cause the limiting factor is the available oxygen. The minimal oxygen content should be 18 percent by volume under normal atmospheric pressure (equivalent to a par tial pressure, pfo of 135 mm Hg). Atmospheres deficient in & do not provide adequate warning and most simple asphyxiants are odorless. Several simple asphyxiants present an explosion hazard. Account should be taken of this factor In limiting the concentration of the asphyx iant. Specific examples are listed in Appendix F. Physical Factors. It is recognized that such physical factors as heat, ultraviolet and ionizing radiation, humidity, abnormal pressure (altitude) and the like may place added stress on the body so that the effects from expo sure at a threshold limit may be altered. Most of these stresses act adversely to increase the toxic response of a substance. Although most threshold limits have built-in safety factors to guard against adverse effects to moder ate deviations from normal environments, the safety fac tors of most substances are not of such a magnitude as to take care of gross deviations. For example, continu ous work at temperatures above 90F, or overtime ex tending the workweek more than 25%, might be consid- 6 ered gross deviations. In such instances judgment must be exercised in the proper adjustments of the Threshold Limit Values. Biologic Limit Values (BLVs). Other means exist and may be necessary for monitoring worker exposure other than reliance on the Threshold Limit Values for industrial air, namely, the Biologic Limit Values. These values rep resent limiting amounts of substances (or their effects) to which the worker may be exposed without hazard to health or well-being as determined in his tissues and fluids or in his exhaled breath. The biologic measure ments on which the BLVs are based can furnish two kinds of information useful in the control of worker ex posure: (1) measure of the individual worker's-over-all exposure; (2) measure of the worker's individual and characteristic response. Measurements of response fur nish a superior estimate of the physiologic status of the worker, and may be made of (a) changes in amount of some critical biochemical constituent, (b) changes in ac tivity of a critical enzyme, (c) changes in some physiolo gic function. Measurement of exposure may be made by (1) determining in blood, urine, hair, nails, in body tis sues and fluids, the amount of substance to which the worker was exposed; (2) determination of the amount of the metabolite(s) of the substance in tissues and fluids; (3) determination of the amount of the substance in the exhaled breath. The biologic limits may be used as an adjunct to the TLVs for air, or in place of them. The BLVs, and their associated procedures for determining compliance with them, should thus be regarded as an effective means of providing health surveillance of the worker. Unlisted Substances. Many substances present or handled in industrial processes do not appear on the TLV list. In a number of instances the material is rarely present as a particulate, vapor or other airborne con taminant, and a TLV is not necessary. In other cases sufficient information to warrant development of a TLV, even on a tentative basis, is not available to the Commit tee. Other substances, of low toxicity, could be included in Appendix E pertaining to nuisance particulates. This list (as well as Appendix F) is not meant to be all inclu sive; the substances serve only as examples. In addition there are some substances of not incon siderable toxicity, which have been omitted primarily be cause only a limited number of workers (e.g., employ- 7 sc 16115 LAM024966 ees of a single plant) are known to have potential exposure to possibly harmful concentrations. "Notice of Intent." At the beginning of each year, proposed actions of the Committee for the forthcoming year are issued in the form of a "Notice of Intended Changes." This Notice provides not only an opportunity for comment, but solicits suggestions of substances to be added to the list. The suggestions should be accom panied by substantiating evidence. The list of Intended Changes follows the Adopted Values in the TLV booklet. Values listed in parenthesis in the "Adopted" list are to be used during the period in which a proposed change for that Value is listed in the Notice of Intended Changes. Legal Status. By publication in the Federal Register (Vol. 36, No. 105, May 29, 1971) the Threshold Limit Values for 1968 were made official federal standards for industrial air. Since 1971, new standards for certain of these substances have been promulgated by OSHA. Reprint Permission. This publication may be reprint ed provided that written permission is obtained from the Secretary-Treasurer of the Conference and that it be published in its entirety. 8 Substance Abate............................ Acetaldehyde................. Acetic acid.................... C Acetic anhydride........... Acetone........................ Acetonitrile.................... Acetylene....................... Acetylene dichloride, see 1,2-Dichioroethylene. Acetylene tetrab romide... Acrolein........................ Aciylamide -- Skin........ ** Acrylonitrile -- Skin....... Aldrin --Skin............... Ally! alcohol -- Skin..... Allyl chloride.................. Allyl glycidyl ether (AGE) --Skin............ Allyl propyl disulfide....... Alundum (AbCb) .......... 4-Aminodiphenyl -- Skin 2-Aininoethanol, see Ethanolamine............. 2-Aminopyridine........... Ammonia....................... Ammonium chloride-fume............ Ammonium sulfamate (Animate).................. n-Amyl acetate.............. sec-Amyl acetate............ ** Aniline -- Skin.............. Anisidine (o-, p-isomers) -- Skin.... ** Antimony & Compounds (as Sb)...................... * Antimony trioxide, handling and use (as Sb)............................ " Antimony trioxide production (as Sb)..... ADOPTED VALUES TWA ppm*' mg/m1*' __ 100 10 5 1,000 40 F 10 180 25 20 2,400 70 -- TENTATIVE VALUES STEL ppm*1 mg/m*4' _ 20 150 270 15 37 ---- 1,250 3,000 60 105 ---- 200 790 250 1,000 1 14 1.5 16 0.1 0.25 0.3 0.8 -- 0.3 -- 0.6 (20) (45) (30) (65) -- 0.25 -- 0.75 2 54 10 1 32 6 S 22 10 44 2 12 3 18 -- E-- 20 -- Alb -- Alb 3 86 15 0.5 2 2 4 25 18 35 27 -- 10 -- 20 -- 10 -- 20 100 530 150 800 125 670 150 800 (5) (19) -- -- 0.1 0.5 -- -- (0.5) -- 0.5 -- (0.5, A2) -- -- -- Capital letters refer to Appendices. Footnotes (a thro g) see Page 31. "See Notices of Intended Changes. *1978 Addition 9 SC 16116 LAM024967 Substance ADOPTED VALUES TWA ppm*' mg/m1*' TENTATIVE VALUES STEL ppm" mg/m1*' ANTU (a-Naphthyl thiourea)................... Argon............................ " Arsenic & compounds (as As)...................... ** Arsenic trioxide production (as As)..... Arsine........................... " Asbestos (all forms)...... Asphalt (petroleum) fumes........................ * Atrazine........................ Azinphos-methyl -- Skin Barium (soluble compounds), as Ba.... Baygon (propoxur)........ Benzene......................... Benzidine production --Skin.... p-BenzoquInone, see Quinone.................... Benzoyl peroxide............ Benz(a)pyrene............... Benzyl chloride.............. Beryllium....................... Biphenyl......................... C Bisphenol A, see Dlglyddal ether (DGE). Bismuth teNuride............ Bismuth telluride, Se-doped................... Borates, tetra, sodium salts, Anhydrous ................. Decahydrate.............. Pentaliydrate............. Boron oxide................... Boron tribromide............ C Boron trifluoride............ Bromine........................ Bromine pentafluoride.... F _ _ 0.05 -- -- -- __ -- 10, A2 _ 0.1 -- -- 1 -- 0.2 0.5 -- -- -- -- 1 1 0.1 0.1 0.3 --F _(0.5) (Ala) 0.2 (Ala) -- -- 5 10 0.2 0.5 0.5 30. A2 -- -- __ -- -- Alb 0.4 0.3 5-- A2 -- 5 . --- 0.002 -- 1.5 0.6 3.0 10 -- 5 1 5-- 1-- 10 -- 10 3 _3 0.7 0.3 0.7 0.3 0.9 F _ -- (Ala) 10 -- 0.6 __ 2 -- Alb 2 -- A2 -- 0.025 4 _ 20 10 -- -- 20 3_0 2 2 Capital tetters refer to Appendices. Footnotes (a thru g) see Page 31. "See Notice of Intended Changes. `1978 Addition. 10 Substance ADOPTED VALUES TWA ________ ppm*1 mg/m1*1 TENTATIVE VALUES STEL ppm" mg/m1*' Bromochloromethane/ chlombromomethane. Bromoform -- Skin...... Butadiene (1, 3-butadiene).............. Butane........................... Butanethiol, see Butyl mercaptan................. 2-Butanone................... 2-Butoxyethanoi (Butyl Cellosolve) -- Skin.... n-Butyl acetate.............. sec-Butyl acetate............ tert-Butyl acetate............ * Butyl acrylate................. C n-Butyl alcohol -- Skin.. sec-Butyl alcohol............ tert-Butyl alcohol............ C Butylamine -- Skin........ C tert-Butyl chromate (as CrOj) -- Skin............ n-Butyl glycidyl ether (BGE)........................ n-Butyl lactate............... Butyl mercaptan............. p-teit-Butyltoluene......... Cadmium, dust & salts (as Cd) ...................... C Cadmium oxide fume (as Cd)............................ " Cadmium oxide production (as Cd)..... Calcium carbonate/ marble....................... Calcium arsenate (as As) Calcium cyanamide........ * Calcium hydroxide........ * Calcium oxide............... Camphor, synthetic........ Caprolactam Dust.......................... Vapor........................ 200 0.5 1,000 600 0.5 200 50 150 200 200 10 50 150 100 5 50 5 0.5 10 _ _ _ ____ -- -- -- -- 2 ___ 5 1,050 5 250 -- 2,200 1,250 1,430 750 1.5 590 300 240 710 950 950 55 150 450 300 15 0.1 270 25 1.5 60 0.05 0.05 (A2) E 1 0.5 5 2 12 1 20 150 200 250 250 -- -- -- 150 -- -- _ -- -- 20 _ _ _ _ -- -- -- -- 3 _ 10 1,300 -- 2,750 1,780 _ 885 720 950 1,190 1,190 -- -- -- 450 -- __ __ -- -- 120 0.2 _ _ 20 -- 1 -- -- 18 3 40 Capital letters refer to Appendices. "See Notice of Intended Changes. *1978 Addition. 11 I6I17 LAM024968 Substance Captafol (Difolatan*) --Skin... Captan........................... Carbaiyl (Sevin*).......... Carbofirran (Furadan*).. Carbon black................. Carbon dioxide.............. " Carbon disulfide --Skin........ Carbon monoxide.......... Carbon tetrabromide..... Carbon tetrachloride --Skin.. * Carbonyl chloride (Phosgene)............... * Carbonyl fluoride............ Catechol (Pyrocatechol).. Cellulose (paper fiber).... Cesium hydroxide.......... Chlordane -- Skin......... Chlorinated camphene -- Skin..... Chlorinated diphenyl oxide.......................... Chlorine......................... Chlorine dioxide............. C Chlorine trifluoride......... C ChloroacetaJdehyde........ a-Chloroacetophenone (Phenacyl chloride).... Chlorobenzene (Monochlorobenzene). o-Chlorobenzylidene malonoitrile --Skin... Chlorobromomethane/ Bromochloromethane 2-Chloro-l, 3-butadiene, see/3 Chloroprene -- Skin........................... Chlomdifluofomethane. Chlorodiphenyl (42% Chlorine) -- Skin...... ADOPTED VALUES TWA ppm" mg/m1*' TENTATIVE VALUES STEL ppm" mg/m**' -- -- -- -- -- 5,000 (20) SO 0.1 10 0.1 5 5 __ -- _ __ -- 1 0.1 0.1 1 0.05 75 0.05 200 0.1 5 5 0.1 3.5 9,000 -- -- -- -- -- 15.000 -- 15 10 -- 7 18.000 (60) (30) 55 400 1.4 0.3 (90) 440 4 65 20 130 0.4 -- 15 20 E __ _ _ 2 0.5 -- _ 0.5 __ 0.5 _ 33 0.3 0.3 0.4 _ 3-- __ _ _ 20 __ 2 1 2 9 0_.9 __ 0.3 -- __ 350 -- 0.4 __ __ __ 1,050 250 1.300 25 1.000 -- 90 35 3.500 1.250 1-- 125 4.375 2 Capital letters refer to Appendices. * `See Notice of Intended Changes. *1978 Addition. 12 Substance Chlorodiphenyl (54% Chlorine) -- Skin...... 1-Chloro, 2, 3-epoxy-propane (Epichlorhydrin) -- Skin........................... C 2-Chloroethanol (Ethylene chlorohydrin)--Skin. ** Chloroethylene (Vinyl chloride)................... * Chloroform (Trichloromethane).... bis-Chloromethyl ether... 1 -Chloro-1 -nitro-propane Chloropicrin.................. ** ^-Chloroprene -- Skin .. Chlorpyrifos (Dureban*) --Skin... o-Chlorostyrene............. o-Chlorotoluene -- Skin. 2-Chloro- 6-(trichloromethyl pyridine (N-Seive*)... Chromates, certain insoluble forms......... Chromic acid and Chromates, (as Cr).... * Chromite ore processing (chromate), as Cr....... Chromium, Sol. chromic, chromous salts (as Cr).............. Clopidol (Coyden*)...... Coal tar pitch volatiles (See Particulate polycyclic aromatic hydrocarbons)............ ** Cobalt metal, dust and fume (as Co)............ ADOPTED VALUES TWA ppm*1 mg/m1*' -- 0.5 5 20 1 (Ale) 10, A2 0.001 20 0.1 (25) -- 50 50 3 - 50, A2 Ala 100 0.7 (90) 0.2 285 250 -- 10 -- 0.05, Ala -- 0.05 -- 0.05, Ala -- 0.5 -- 10 -- 0.2.Ala - (0.1) TENTATIVE VALUES STEL ppm" mg/m,*> .. 1 10 40 (Ale) -- -- 0.3 (35) _ 75 75 __ __ Ala -- 2 (135) 0.6 430 375 20 _ Ala __ _ __ -- 20 Ala __ __ Capital letters refer to Appendices. Footnotes (a thru g) see Page 31. "See Notice of Intended Changes. *1978 Addition. 13 sc 16118 LAM024969 Substance Copper fume.............. Dusts & Mists (as Cu) Corundum (Ab Oo).... Cotton dust, raw............ Crag* herbicide............. Cresol, all isomers -- Skin........ Crotonaldeftyde............. Cnifomate*................... Cumene -- Skin............ Cyanamide..................... Cyanide, as CN -- Skin.. Cyanogen ...................... Cyclohexane.................. Cyclohexanol................. Cyclohexanone.............. Cyclohexene.................. Cyclohexylamine -- Skin Cydopentadlene............. 2, 4-0 (2, 4-Oiphenoxy- acetic acid)................ DOT (Dichlorodiphenyi- trichloroethane)......... DOVP, see Oichlorvos -- Skin....................... Decaborane -- Skin....... Demeton* -- Skin........ Diacetone alcohol (4-hydroxy-4-methyl2-pentanone)............. 1,2-Diaminoethane, see Ethylenediamine......... Diazinon -- Skin........ Diazomethane............... Dlborane................... ** 1,2-Dibromoethane (Ethylene dibromide) -- Skin...................... Oibrom*.................. 2-N-Dibutylaminoethanol -- Skin...................... Oibutyl phosphate......... I) Step. 33. Footnotes (a thru a) see Page 31. "See Notice of Intended Changes. ADOPTED VALUES TWA ppm" mg/m^' __ 0.2 __ 1 _E ___ 0.2 __ 10 5 22 26 __ 5 _50 245 2 5 10 20 300 1,050 50 200 50 200 300 1,015 10 40 75 200 __ 10 --1 0.1 0.05 0.01 1 0.3 0.1 50 240 10 25 01 0.2 0.4 0.1 0.1 (20) (155) 3 2 14 15 TENTATIVE VALUES STEL ppm*' mg/m1*' 2 __ E 0,6 ot\ 6 18 20 75 365 _ 375 1,300 _ __ 150 __ 0.3 0.15 0.03 inn ?n a 3 0.9 0.3 75 ran 03 (30) (230) 4 28 2 10 14 Substance ADOPTED VALUES TWA ppm" mg/m1*' TENTATIVE VALUES STEL ppm" mg/m1*" Dibutyl phthalate............ -- C Dichloracetylene............ 0.1 C o-Dichlorobenzene......... 50 p-Dichlorobenzene......... 75 Dichlorobenzidine -- Skin........................... Dichlorodifluoromethane. 1,000 1,3-Oichloro-5, 5-dimethyl hydantoin.. ___ 1,1-Oichloroethane....... 200 " 1,2-Dichloroethane....... (50) 1,2-Dichloroethylene.... 200 Dichloroethyt ether-- Skin........................... 5 ** Dichloromethane, see Methylene chloride .... (200) * Dichloromonofluoro- methane..................... (1,000) C 1,1-Dichloro-1- nitroethane................. 10 1,2-Oichloropropane, see Propylene dichloride.................. 75 Dichlorotetrafluoro- ethane....................... 1,000 Oichlorvos (DDVP) -- Skin...................... 0.1 Dicrotophos (Bidrin*) -- Skin........................... Dicyciopentadiene......... 5 Dicydopentadienyl iron.. -- Dieidrin -- Skin............. -- Oiethylamine.................. 25 Diethylaminoethanol -- Skin........................... 10 Diethylene triamine -- Skin........................... 1 Diethyl ether, see Ethyl ether.......................... 400 Diethyl phthalate............ -- Difluorodibromomethane. 100 5 0.4 300 450 A2 4,950 0.2 810 (200) 790 30 (700) (4,200) 60 350 7,000 1 0.25 30 10 0.25 75 50 4 1,200 5 860 -- -- -- 110 1,250 _ 250 (75) 250 10 (250) _ _ 110 1,250 0.3 -- -- -- -- _ _ 500 -- 150 10 -- -- 675 A2 6,200 0.4 1,010 (300) 1,000 60 (870) _ 510 8,750 3 -- 20 0.75 -- _ 1,500 10 1,290 Capital letters refer to Appendices. "See Notice of Intended Changes. 15 SC 16119 LAM024970 Substance ADOPTED VALUES TWA ppm" mg/m*41 C Diglycidyl ether (OGE).... Dihydroxybenzene, see 0.5 Hydroquinone........... -- Diisobutyl ketone.......... Diisopropylamine -- 25 Skin........................... Dimethoxymethane, see 5 Methytal.................... Dimethyl acetamide -- Skin........................... * Dimethyl carbamyl 1,000 10 chloride.................... A2 Dimethylamine.............. Dimethylaminobenzene, 10 see XyUdene -- Skin.. DimethylaniBne (N, 5 N-Oimethylaniline) -- Skin........................... Dimethytbenzene, see 5 Xylene -- Skh.......... Dimethyl-1, 100 2-dibromo-2-dichloroethyl1 phosphate, see Dibrom...................... -- Dimethylformamide -- Skin........................... 10 2,6-Dimethyl-4-heptanone, see Diisobutyl ketone.. 1,1-Oimethyltydrazine 25 -- Skin...................... Dimethylphthalate.......... 0.5 -- C Dimethyl sulfate -- Skin. I i.l, A2 Dinitrobenzene (all isomers) -- Skin........ 0.15 Dinitro-o-cresol -- Skin . -- 3, 5-Dmitro-o-totuamide (Zoalene*)................. -- Dinitrotoluene -- Skin ... -- Dioxane, tech, grade -- Skin........................... Dioxathion (Delnav*) -- Skin........................... 50 _ 3 2 150 20 3,100 35 A2 18 25 25 435 3 30 150 1 5 0.5, A2 1 0.2 5 1.5 180 0.2 TENTATIVE VALUES STEL ppm" mg/mj4> __ _ --4 ---- ---- 1,250 15 -- _ 3,875 50 _ _ 10 50 10 50 150 650 _6 20 60 ---- 12 -- 10 ---- 0.5 3 -- 0.6 -- 10 --5 ---- __ _ Capital letters refer to Appendices. Footnotes (a thru g) see Page 31. 1978 Addition. 16 Substance ADOPTED VALUES TWA ppm" mg/m1*' TENTATIVE VALUES STEL ppm" mg/m1*' Diphenyl, see Biphenyl... Diphenylamine.............. C Diphenylmethane diisocyanate, see Methylene bisphenyl isocyanate (MDI)........ Dipropylene glycol methyl ether--Skin .. Diquat........................... Di-sec, octyl phthatate (Di-2-ethylhexyl- phthalate).................. Disulfiram...................... Disyston -- Skin............ 2, 6-Ditert. butyl-p-cresol............ Diuron........................... Dyfonate....................... Emery........................... Endosulfan (Thiodan*) -- Skin...................... Endrin -- Skin.............. ** Epichlorhydrin -- Skin... EPN -- Skin.................. 1, 2-Epoxypropane, see Propylene oxide......... 2.3-Epoxy-1-propanol, see Glycidol............... Ethane........................... Ethanethiol. see Ethyl mercaptan................. Ethanolam'me................. Ethion (Ntalate) -- Skin 2-Ethoxyethanol -- Skin. 2-Ethoxyethyl acetate (Cellosolve acetate) -- Skin........................... Ethyl acetate.................. Ethyl aciylate -- Skin .... Ethyl alcohol (Ethanol)... Ethylamine.................... 0.2 -- 0.02 100 -- -- -- -- -- -- -- -- -- -- (5) -- 100 50 F 0.5 3 -- 100 100 400 25 1,000 10 1.5 0.6 10 -- 0.2 -- 600 150 0.5 -- 5-- 2-- 0.1 -- 10 -- 10 -- 0.1 -- E-- 0.1 -- 0.1 -- (20) (10) 0.5 -- 240 150 150 75 --F 12 86 0.4 -- 370 150 540 1,400 100 1,900 18 150 -- -- -- 4 20 -- 900 1 10 5 0.3 20 -- -- 20 0.3 0.3 (40) 2 360 225 -- 3 15 -- 560 810 -- -- -- Capital letters refer to Appendices. "See Notice of Intended Changes. 17 sc 16120 LAM024971 Substance Ethyl sec-amyl ketone (4-Methyl-3heptanone)................. Ethyl benzene................. Ethyl bromide............... Ethylbutyl ketone (3-Heptanone)............ Ethyl chloride................. Ethyl ether.................... Ethyl formate................. Ethyl mercaptan............. ** Ethyl silScate................. Ethylene........................ C Ethylene chlorohydrin -- Skin........................... Ethylenediamine............. ** Ethylene dibromide, see 1,2-Oibromoethane... ** Ethylene dichloride, see 1,2-Oichloroethane... Ethylene glycol, Particulate................. Vapor........................ C Ethylene glycol dinitrate and/or Nitroglycerin -- Skin..................... Ethylene glycol monomethyl ether acetate (Methyl cellosolve acetate) -- Skin........................... Ethylene oxide............... Ethylenimine -- Skin..... Ethytidene chloride, see 1,1-Dichloroethane... C Ethylidene norbomene... N-Ethylmorphofine -- Skin........................... Fensulfothion (Dasanit).. Ferbam......................... Ferrovanadium dust...... Fluoride (as F)............... Fluorine........................ Capital letters refer to Appendixes. "See Notice of Intended Changes. ADOPTED VALUES TWA ppm"" mg/m1*1 25 100 200 50 1,000 400 100 0.5 (100) F 1 10 (20) (50) 100 130 435 890 230 2,600 1,200 300 1 (850) -- 3 25 (155) (200) 10 250 0.2" 2 25 120 50 90 0.5 1 200 810 5 25 20 94 -- _ _ 0.1 10 1 -- 2.5 12 TENTATIVE VALUES STEL ppm" mg/m,w 125 250 75 1,250 500 150 2 -- F 545 1,110 345 3,250 1,500 450 3 -- -- ---- (30) (230) (75) (300) 20 125 325 35 170 _75 135 _ 250 1,010 --_ __ _ _ _ 20 0_.3 24 18 Substance ppm"1 ADOPTED VALUES TENTATIVE VALUES TWA STEL mg/mj8> pprir" mg/m3*' Fluorotrichloromethane.. C Formaldehyde............... Formamide..................... Formic acid................... Furfural -- Skin............. Furfuryl alcohol -- Skin . Gasoline........................ Germanium tetrahydride. Glass, fibrous*' or dust.. C Glutaraldehyde. activated or unactivated........... Glycerin mist................. Glycido! (2, 3-Epoxy- 1-propanol)............... Glycol monoethyl ether, see 2-Ethoxyethanoi -- Skin...................... Graphite (Synthetic)...... Guthion, see Azinphos-methyl -- Skin........................... Gypsum......................... Hafnium......................... Helium........................... Heptachlor -- Skin....... Heptane (n-Heptane)..... Hexachlorocyclopenta- diene.......................... Hexachloroethane -- Skin........................... Hexachloronaphthalene -- Skin...................... Hexafluoroacetone......... Hexane (n-hexane)......... * Hexamethyl phosphoramide -- Skin........................... 2-Hexanone, see Methyl butyl ketone -- Skin .. Hexone (Methyl isobutyl ketone) -- Skin......... 1,000 2 20 5 5 5 -- 0.2 -- __ -- 50 100 -- -- -- F -- 400 0.01 1 _ 0.1 100 A2 25 100 5,600 3 30 9 20 20 B2 0.6 10 1,250 -- 30 -- 15 10 -- 0.6 -- (0.25) E -- 150 75 370 150 E-- 0.2 E 0.5 -- 0.5 1,600 0.1 10 0.2 0.7 360 -- -- F -- 500 0.03 3 _ 0.3 125 A2 100 40 410 125 7,000 -- 45 -- 60 40 B2 1.8 -- _ E 225 560 -- 0.6 20 1 .b -- 2 2,000 0.3 30 0.6 2 450 165 510 Capital letters refer to Appendices. Footnotes (a thru g) see Page 31. *1978 Addition. "See Notice ot Intented Changes. 19 sc 16121 LAM024972 Substance ADOPTED VALUES TWA ppm" mg/m1*' sec-Hexyl acetate.......... 50 300 C Hexylene glycol............. 25 125 Hydrazine -- Skin......... 0.1, A2 0.1, A2 Hydrogen ...................... F -- Hydrogenated terphenyls 0.5 5 Hydrogen bromide......... 3 10 C Hydrogen chloride......... 5 7 ** Hydrogen cyanide -- Skin........................... Hydrogen fluoride.......... (10) 3 (11) 2 Hydrogen peroxide........ 1 1.5 Hydrogen selenide......... Hydrogen sulfide............ Hydroquinone............... Iridene........................... 0.05 10 -- 10 0.2 15 2 45 Indium & Compounds (as In) ....................... C Iodine............................ -- 0.1 0.1 1 Iodoform....................... 0.6 10 Iron oxide fume............. Iron pentacarbonyl......... B3 0.01 5 0.08 Iron salts, soluble (as Fe)............................ Isoamyl acetate............. -- 100 1 525 Isoamyl alcohol............. 100 360 Isobutyl acetate............. 150 700 Isobutyl alcohol............. 50 150 C Isophorone................... 5 25 Isophorone diisocyanate -- Skin .. 0.01 0.03 Isopropyl acetate............ 250 950 Isopropyl alcohol --Skin 400 980 Isopropylamine.............. 5 12 Isopropyl ether.............. 250 1,050 Isopropyl glycidyl ether (IGE)......................... Kaolin............................ Ketene........................... 50 -- 0.5 240 E 0.9 Lead, inorg., fumes & dusts (as Pb)............. -- 0.15 Lead arsenate (as Pb).... -- 0.15 Lead chromate (as Cr)... 0.05, A2 TENTATIVE VALUES STEL ppm*' mg/m1*' __ __ ---- -- __ F-- ---- ---- ---- (15) (16) 23 -- __ 15 27 --4 15 70 -- 0.3 __ __ 1 20 -- 10 ---- --2 125 655 125 450 187 875 75 225 ---- ---- 310 1,185 500 1,225 10 24 310 1,320 75 360 -- 20 1.5 3 -- 0.45 -- 0.45 Capital letters refer to Appendices. "See Notice of Intended Changes. 20 Substance Limestone...................... Lindane -- Skin............. Lithium hydride............. L.P.G. (Liquified petroleum gas).......... Magnesite...................... Magnesium oxide fume (as Mg)...................... Malathion -- Skin......... Maleic anhydride............ C Manganese & Compounds (as Mn).. Manganese cyclopentadienyl tricarbonyl (as Mn) -- Skin........................... * Manganese Tetroxide..... Marble/calcium carbonate.................. Mercury (Alkyl compounds) -- Skin, (as Hg)...................... Mercury (All forms except alkyl), as Hg ... Mesityl oxide................. Methane........................ Methanethiol, see Methyl mercaptan................. Methomyl (Lannate) -- Skin........................... Methoxychlor................. 2-Methoxyethanol -- Skin (Methyl cellosolve)................. Methyl acetate................ Methyl acetylene (propyne) .................. Methyl acetylene-propadiene mixture (MAPP)......... Methyl acrylate -- Skin .. ADOPTED VALUES TWA ppm" mg/m1*' _E -- 0.5 -- 0.025 1,000 -- 1,800 E -- -- 0.25 10 10 1 5 -- 0.1 --1 E 0.001 -- 25 F 0.5 -- 0.01 0.05 100 "" 1 2.5 10 25 200 1,000 80 610 1,650 1,000 10 1,800 35 TENTATIVE VALUES STEL ppm01 mg/m1*' _ 20 -- 1.5 ---- 1,250 -- 2,250 20 ---- ---- ---- -- 0.3 ---- 20 0.003 -- -- F 0.03 0.15 -- ---- 35 250 1,250 120 760 2,040 1,250 2,250 Capital letters refer to Appendices. *1978 Addition. 21 sc 16122 LAM024973 Substance ADOPTED VALUES TWA ppnr" mg/m3*' Methylacrylonitrile -- Skin........................... Methylal 1 (dimethoxymethane).. 1,000 Methyl alcohol (methanol) -- Skin.... 200 Methylamine.................. 10 Methyl amyl alcohol, see Methyl isobutyl carbinol -- Skin........ 25 Methyl 2-cyanoaciylate.. 2 Methyl n-amyl ketone (2-Heptanone)............ 100 Methyl bromide -- Skin . 15 Methyl butyl ketone, see 2-Hexanone -- Skin... Methyl cellosolve -- Skin 25 see 2-Methoxyethanol. 25 Methyl cellosolve acetate -- Skin, see Ethylene glycol monomethyl ether acetate.............. 25 Methyl chloride.............. 100 Methyl chloroform (1,1, 1 -Trichloroethane)..... 350 Methylcyclohexane....... Methylcydohexanol........ 400 50 o-Methycyciohexanone -- Skin...................... 50 Methylcydopentadienyl manganese tricarbonyl (as Mn) -- Skin......... Methyl demeton -- Skin. 0.1 -- Methylene bisphenyl isocyanate (MDI)........ 0.02 Methylene chloride (dichloromethane)..... (200) 4, 4'-Methylene bis (2-chloraniline) -- Skin........................... 0.02, A2 Methylene bis (4-cydo- hexyiisocyanate)........ 0.01 3 3,100 260 12 100 8 465 60 100 80 120 210 1,900 1,600 235 230 0.2 0.5 0.2 (700) -- 0.11 TENTATIVE VALUES STEL ppnr" mg/m3"" 2 1,250 250 -- 6 3,875 310 -- 40 160 4 16 150 710 __ __ 40 165 35 120 35 170 125 260 450 2,380 500 2,000 75 350 75 345 0.3 -- -- (250) 0.6 1.5 -- (870) A2 -- ---- Substance Methyl ethyl ketone (MEK), see 2-Butanone............... C Methyl ethyl ketone peroxide.................... Methyl formate.............. Methyl iodide --Skin.... Methyl isoamyl ketone... Methyl isobutyl carbinol -- Skin...................... Methyl isobutyl ketone, see Hexone -- Skin ... Methyl isocyanate -- Skin........................... Methyl mercaptan.......... Methyl methacrylate...... Methyl parathion -- Skin Methyl propyl ketone, see 2-Pentanone........ C Methyl silicate............... C a-Methyl styrene............ Molybdenum (as Mo) Soluble compounds... Insoluble compounds . Monocrotophos (Azodrin*)................. Monomethyl aniline -- Skin........................... C Monomethyi hydrazine -- Skin...................... Morpholine -- Skin........ Naphthalene.................. /3-Naphthylamine.......... Neon.............................. Nickel carbonyl.............. Nickel metal.................. Nickel, soluble compounds (as Ni).... Nickel sulfide roasting, fume & dust (as Ni)... Nicotine -- Skin............ Nitric acid...................... AOOPTED VALUES TWA ppnr" mg/m3*' 200 0.2 100 5 100 25 100 0.02 0.5 100 -- 200 5 100 -- -- -- 2 0.2 20 10 -- F 0.05 -- -- -- -- 2 590 1.5 250 28 475 100 410 0.05 1 410 0.2 700 30 480 5 10 0.25 9 0.35 70 50 Alb -- 0.35 1 0.1 1, Ala 0.5 5 TENTATIVE VALUES STEL ppnr" mg/m3*' 300 885 ---- 150 375 10 56 150 710 40 165 125 510 ---- ---- 125 510 -- 0.6 250 875 ---- ---- -- 10 -- 20 ---- 4 18 -- 30 105 15 75 -- Alb F-- ---- ---- -- 0.3 ---- -- 1.5 4 10 Capital letters refer to Appendices. "See Notice of Intended Changes. 22 Capital letters refer to Appendices. Footnotes (a thru g) see Page 31. 23 Sc 16123 LAM024974 Substance ADOPTED VALUES TWA ppm"' mg/m1*' TENTATIVE VALUES STEL ppm" mg/mJ" Nitric oxide................... p-Nitroaniline -- Skin.... Nitrobenzene--Skin..... p-Nitrochlorobenzene -- Skin........................... 4-Nitrodiphenyl.............. Nitroetbane................... C Nitrogen dioxide............ Nitrogen trifluoride........ C Nitroglycerin -- Skin..... Nitromethane................. 1-Nitropropane.............. " 2-Nitropropane.............. N-Nitrosodimethylamine (dimethylnitrosoamine) -- Skin...................... Nitrotoluene -- Skin....... N itrotrichloromethane, see Chioropicrin......... Nonane.......................... Odachloronaphthalene -- Skin...................... Octane........................... Oil mist, mineral............ Osmium tetroxide (as Os)............................ Oxalic acid.................... Oxygen difluoride.......... Ozone............................ Paraffin wax fume......... * Paraquat, respirable sizes.......................... Parathion -- Skin.......... Particulate polycyclic aromatic hydrocarbons (PPAH), as benzene solubles... Pentaborane.................. Perrtachloronaphthalene . Pentachlorophenol -- Skin........................... 25 1 1 -- -- 100 5 10 0.2" 100 25 (25) -- 5 0.1 200 -- 300 -- 0.0002 -- 0.05 0.1 -- -- -- 0.005 -- 30 35 62 52 1 Alb _ 310 150 9-- 29 15 2-- 250 150 90 35 (90) A2 -- 30 10 0.7 1,050 0.1 1,450 5 0.3 250 -- 375 0.002 1 0.1 0.2 2 0.0006 -- 0.15 0.3 0.1 -- 0.1 0.2,Ala 0.01 0.5 -- 0.015 -- 0.5 45 12 10 2 Alb 465 -- 45 -- 375 135 A2 60 2 1,300 0.3 1,800 10 0.006 2 0.3 0.6 6 -- 0.3 Ala 0.03 2 1.5 Capital letters refer to Appendices. Footnotes (a thru g) see Page 31. *1978 Addition. "See Notice of Intended Changes. 24 Substance Pentaerythritol............... Pentane........................ 2-Pentanone.................. Perchloroethylene -- Skin........................... Perchloromethyl mercaptan................. Perchloryt fluoride......... Phenol --Skin.............. Phenothiazine -- Skin.... p-Phertylene diamine -- Skin........................... Phenyl ether (vapor)....... Phenyl ether-Oiphenyl mixture (vapor)......... Phenylethylene, see Styrene, monomer..... Phenyl glycidyl ether (PGE)........................ * Phenyl mercaptan.......... Phenylhydrazine -- Skin. C Phenylphosphine........... Phorate (Thimet) -- Skin........................... Phosdrin (Mevinphos) -- Skin...................... * Phosgene (carbonyl chloride)................... Phosphine.................... Phosphoric acid............. Phosphorus (yellow)..... " Phosphorus pentachloride............. Phosphorus pentasuffide Phosphorus trichloride... Phthalic anhydride......... m-Phthalodinitrile.......... Pidoram (Tordon*)....... Picric add -- 9tin......... Pival* (2-Pivalyl-1,3- indandione)............... Plaster of Paris.............. ADOPTED VALUES TWA ppm01 mg/m1*' --E 600 1,800 200 700 100 670 0.1 0.8 3 14 5 19 --5 -- 0.1 17 17 100 420 10 0.5 5 0.05 60 2 22 0.25 -- 0.05 0.01 0.1 0.1 0.4 0.3 0.4 --1 -- 0.1 -- (1) --1 0.5 3 16 --5 -- 10 -- 0.1 -- 0.1 --E TENTATIVE VALUES STEL ppm" mg/m1*' -- 20 750 2,250 250 875 150 1,000 ---- 6 28 10 38 -- 10 ---- 2 14 2 14 125 525 15 90 ---- 10 44 ---- -- 0.2 0.03 0.3 ---- 11 --3 -- 0.3 -- (3) --3 ---- 4 24 ---- -- 20 -- 0.3 -- U.3 -- 20 Capital letters refer to Appendices. 1978 Addition. "See Notices of Intended Changes. 25 SC 16124 UM024975 Substanceppm" mg/m**' ADOPTED VALUES TWA ppm" mg/m**1 TENTATIVE VALUES STEL Platinum (Soluble salts) as Pt.......................... Polychlorobiphenyls, see Chlorodiphenyls -- Skin........................... Poiytetrafluoroethylene decomposition products................... C Potassium hydroxide..... Propane ........................ 0-Propiofactone............. Propargyl alcohol -- Skin........................... n-Propyl acetate............. Propyl alcohol -- Skin... n-Propyl nitrate............. Propylene...................... Propylene dichloride (1, 2-Dichloropropane).... *C Propylene glycol dinitrate -- Skin...................... Propylene glycol monomethyl ether..... Propylene imine -- Skin. Propylene oxide............. Propyne. see Methyl acetylene................... Pyrethrum..................... Pyridine......................... Quinone........................ RDX --Skin.................. Resorcinol.................... Rhodium, Metal fume and dusts (as Rh)...... Soluble salts (as Rh).. Ronnel........................... Rosin core solder pyrolysis products (as formaldehyde)............ Rotenone (commercial).. Rouge ........................... -- -- -- -- F "*-- 1 200 200 25 F 75 0.2 100 2 100 1,000 -- 5 0.1 -- 10 -- -- -- -- -- -- 0.002 -- ---- B1 -- 2-- --F A2 23 840 250 500 250 105 40 --F 350 110 2-- 360 150 5-- 240 150 1,650 5 15 0.4 1.5 45 1,250 -- 10 0.3 -- 20 0.1 0.001 10 -- -- -- 0.1 -- 5-- E-- -- -- B1 -- -- A2 6 1,050 625 470 -- 510 -- 540 -- 360 2,040 10 30 2 3 90 0.3 0.003 -- 0.3 10 20 Substance ADOPTED VALUES TWA ppm"1 mg/m1*1 TENTATIVE VALUES STEL ppm*" Rubber solvent (Naphtha).................. Selenium compounds (as Se)............................ Selenium hexafluoride, as Se......................... Sevin* (see Carbaryl).... Silane (see Silicon tetrahydride).............. Silicon........................... Silicon carbide.............. Silicon tetrahydride (Silane)...................... ** Silver, metal and soluble compounds, as Ag .... C Sodium azide................. Sodium fluoroacetate (1080) --Skin.......... C Sodium hydroxide......... Starch........................... Stibine........................... Stoddard solvent............ Strychnine..................... Styrene, monomer (Phenylethylene)........ C Subtilisins (Proteolytic enzymes as 100% pure crystalline enzyme).................... Sucrose ........................ ** Sulfur dioxide............... Sulfur hexafluoride........ Sulfuric acid.................. Sulfur monochloride...... Sulfur pentafluoride...... Sulfur tetrafluoride......... Sulfuryl fluoride............. Systox, see Oemeton* -- Skin...................... 2,4, 5-T....................... Tantalum....................... 400 -- 0.05 -- 0.5 -- 0.5 -- 0.1 -- -- -- 0.1 100 -- 100 1,600 0.2 0.4 5 7 E E 0.7 (0.01) 0.3 0.05 2 E 0.5 575 0.15 420 -- 0.00006" --E (5) 1,000 -- (13) 6.000 1 16 0.025 0.25 0.1 0.4 5 20 0.01 0.1 -- 10 --5 -- -- 0.05 -- 1 -- -- 1 -- -- -- -- -- 0.3 125 -- 125 -- -- -- 1,250 -- 3 0.075 0.3 10 0.03 -- -- -- -- 0.4 10 2 20 20 2 (0.03) -- 0.15 -- 20 1.5 720 0.45 525 -- 20 -- 7,500 -- 18 0.75 1 40 0.3 20 10 Capital letters refer to Appendices. *1978 Addition. 26 Capital letters refer to Appendices. **See Notice of Intended Changes. 27 SC 16125 LAM024976 Substance TEDP--Skin................. Teflon* decomposition products................... Tellurium & compounds (as Te)....................... Tellurium hexafluoride, asTe.......................... TEPP --Skin................. **C Terphenyls..................... 1,1.1,2-Tetrachloro-2, 2-difluoroethane........ 1.1,2, 2-Tetrachloro-1, 2-difluoroethane........ 1.1,2, 2-Tetrachk>roethane -- Skin...................... Tetrachloroethylene, see Perchloroethylene -- Skin........................... Tetrachloromethane, see Carbon tetrachloride -- Skin...................... Tetrachloronaphthalene.. Tetraethyl lead (as Pb) -- Skin...................... Tetrahydrofuran............. Tetramethyl lead (as Pb) -- Skin...................... Tetramethyl succinonitrile -- Skin . Tetranitromethane......... Tetryl (2,4, 6-trinitiophenylmethylnitramine) -- Skin........................... Thallium, soluble compounds (as Tl) -- Skin........................... 4, 4'-Thiobis (6-tert. butyl-m-c resol).......... * ThiogiycoSc acid............ ADOPTED VALIAS TWA ppm> mg/m3*' __ 0.2 01 _ 0.1 0.02 0.004 (D 500 0.2 0.05 (9) 4,170 500 4,170 5 35 100 670 10 65 --2 0.100*' 200 590 0.150*' 0.5 3 16 1.5 0.1 10 15 TENTATIVE VALUES STEL ppm*' mg/m3*' _ 0.6 B1 __ _ 0.01 -- 0.2 -- 625 5,210 625 5,210 10 70 150 1,000 20 130 __ 4 0.3 250 735 0.5 29 __ __ 3.0 20 ---- Capital letters refer to Appendices. *1978 Addition. "See Notice of Intended Changes. 28 ADOPTED VALUES TWA Substanceppm01 mg/m3*' Thiram*........................ Tin, inorganic compounds, except SnHa and Sn02 (as Sn) Tin, organic compounds (as Sn) --Skin......... Tin oxide (as Sn)............ Titanium dioxide (as Ti).. Toluene (toluol) -- Skin . **C Toluene-2, 4-diisocyanate (TDI)... o-Toluidine..................... Toxaphene, see Chlorinated camphene -- Skin...................... Tributyl phosphate......... *C 1, 2, 4-Trichlorobenzene 1,1,1-Trichloroethane, see Methyl chloroform 1,1,2-Trichloroethane -- Skin...................... Trichloroethylene.......... * Trichloromethane, see Chloroform............... Trichloronaphthalene..... 1,2, 3-Trichloropropane 1,1, 2-Trichloro 1,2, 2-trifluoroethane........ Triethylamine................. Tricyclohexyttin hydroxide (PUctran*). Trifluoromonobromomethane.................... Trimethyl benzene......... 2,4, 6-Trinitrophenol, see Picric acid -- Skin 2,4, 6-Trinitrophenyl- methylnitramine, see Tetryl -- Skin............ *C 2, 4, 6-Trinitrotoluene (TNT)......................... __ _ -- -- 100 (0.02) 5 -- 5 350 10 100 10, A2 -- 50 1,000 25 __ 1,000 25 _ 5 2 0.1 E E 375 (0.14) 22 0.5 5 40 1,900 45 535 50, A2 5 300 7,600 100 5 6,100 125 0.1 1.5 0.5 TENTATIVE VALUES STEL ppm"1 mg/m3*' __ 10 4 __ 0.2 -- 20 -- 20 150 560 ___ _ 10 44 -- -- 440 20 150 -- 75 1,250 40 _ 1,200 35 _ 2.0 5 -- 2,380 90 800 _ 10 450 9,500 160 10 7,300 170 0.3 3.0 ---- Capital letters refer to Appendices. *1978 Addition. "See Notice of Intended Changes. 29 SC 16126 LAM024977 Substance T riorthocresyl phosphate Triphenyl phosphate...... Tungsten & compounds, as W Soluble.................. Insoluble............... Turpentine.................... Uranium (natural) soluble & insoluble compounds, as U...... Vanadium (Vi Os), as V Dust.......................... C Fume........................ * Valeraldehyde................ Vinyl acetate.................. Vinyl benzene, see Styrene...................... " Vinyl bromide............... ** Vinyl chloride................. Vinyl cyanide, see Acrylonitrile --Skin... Vinyl cyclohexene dioxide...................... Vinyfidene chloride........ Vinyl toluene.................. Warfarin........................ Welding fumes (NOC)t .. Wood dust (nonallergenic).......... Xylene (o-, m-, p-isomers) --Skin.... C m-Xylene a, o'-diamine. Xylidene -- Skin............ Yttrium.......................... Zinc chloride fume......... Zinc chromate (as Cr).... Zinc oxide fume............. Zinc stearate.................. Zirconium compounds (as Zr)....................... ADOPTED VALUES TWA ppm*' _ mg/m1*' 0.1 3 TENTATIVE VALUES STEL ppm" _ mg/m1*' 0.3 6 __ __ 1 5 _ 3 10 100 560 150 840 -- 0.2 -- -- _ 0.5 0.05 __ __ 50 175 __ to 30 20 100 (250) (Ale) 420 (1.100) -- 150 -- (Ale) 20 45 30 10 60 _ 10 40 20 100 480 150 -- 0.1 __ -- 5, 63 -- -- 5-- 100 435 -- 0.1 5 25 --1 __ 1 -- 0.05, A2 __ 5 --E 150 __ 10 __ __ __ __ -- 5 0.6 1_.5 _ 60 63_0 -- 65 _ 80 720 0.3 83 10 655 __ 50 3 2 10 20 10 Capital letters refer to Appendices. f(NOC) not otherwise classified *1978 Addition. "See Notice of Intended Changes. 30 a) Paris of vapor or gas per million parts of contami nated air by volume at 25C and 760 mm. Hg. pres sure. b) Approximate milligrams of substance per cubic meter of air. d) An atmospheric concentration of not more than 0.02 ppm, or personal protection may be necessary to avoid headache for intermittent exposure. e) < 7 /xm in diameter. f) As sampled by method that does not collect vapor. g) For control of general room air, biologic monitoring is essential for personnel control. Radioactivity: For permissible concentrations of radio isotopes in air, see U.S. Department of Commerce, Na tional Bureau of Standards Handbook 69, "Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure," June 5, 1959; Addendum 1, August 1963 (NCRP Report No. 22). Also, see U.S. De partment of Commerce National Bureau of Standards, Handbook 59, "Permissible Dose from External Sources of Ionizing Radiation," September 24, 1954, an adden dum of April 15,1958. A report, Basic Radiation Protec tion Criteria, published by the National Committee on Radiation Protection, revises and modernizes the con cept of the NCRP standards of 1954, 1957 and 1958; obtainable as NCRP Rept. No. 39, 7910 Woodmont Ave., Washington, D.C. 20014. Substance SIUCA, S/O2 Crystalline Quartz MINERAL DUSTS TLV in mppcf*'; 300" % quartz + 10 TLV for respirable dust mg/m3; 10 mg/m30 in % Respirable quartz + 2 TLV for "total dust," respirable and nonrespirable: 30 mg/m3 % quartz + 3 31 sc 16127 LAM024978 Cristobalite.............Use one-half the value calculated Tridymite from the count or mass formulae for quartz. Use one-half the value calculated Silica, fused from formulae for quartz. Use quartz formulae. Tripoli Use respirable1" mass quartz for mula **Amorphous................................................ (20 mppcf1"') SILICATES (< f% quartz) "Asbestos, all forms Mica Mineral wool fiber Perlite Portland Cement Soapstone Talc (nonasbestiform) "Talc (fibrous), use Asbestos limit. "Tremolite, see Asbestos. (5 fibers/cc> fytm in length""; Ala) 20 mppcf 10 mg/m3 30 mppcf 30 mppcf 20 mppcf 20 mppcf COAL DUST 2 mg/m3 (respirable dust fraction < 5% quartz). If > 5% quartz, use respirable mass formula. NUISANCE PARTICULATES (see Appendix E) 30 mppcf or 10 mg/m3*' of total dust < 1% quartz, or, 5 mg/m3 respirable dust. Conversion factors: mppcf x 35.3 = Million particles per cubic meter = particles per cc h) Millions of particles per cubic foot of air, based on impinger samples counted by light-field technics. i) The percentage of quartz in the formula is the amount determined from airborne samples, except in those instances in which other methods have been shown to be applicable. j) Both concentration and percent quartz for the appli- "See Notice of Intended Changes. 32 cation of this limit are to be determined from the fraction passing a size-selector with the following characteristics: Aerodynamic Diameter Oxm) (unit density sphere) 2 2.5 3.5 5.0 10 % passing selector 90 75 50 25 0 k) containing <1% quartz; if quartz content > 1%, use formulae for quartz. l) Lint-free dust as measured by the vertical-elutriator, cotton-dust sampler described in the Transactions of the National Conference on Cotton Oust, J. R. Lynch, pg. 33, May 2,1970. m) As determined by the membrane filter method at 400-450X magnification (4 mm objective) phase con trast illumination. n) Based on "high volume" sampling. o) "Respirable" dust as defined by the British Medical Research Council Criteria (1) and as sampled by a device producing equivalent results (2). (1) Hatch, T. E. and Gross, P., Pulmonary Deposi tion and Retention of Inhaled Aerosols, p. 149. Academic Press, New York, New York, 1964. (2) Interim Guide for Respirable Mass Sampling, AIHA Aerosol Technology Committee, AHIA J. 31: 2.1970, p. 133. NOTICE OF INTENOED CHANGES (for 1978) These substances, with their corresponding values, comprise those for which either a limit has been pro posed for the first time, or for which a change in the "Adopted" listing has been proposed. In both cases, the proposed limits should be considered trial limits that will remain in the listing for a period of at least two years. If, after two years no evidence comes to light that ques tions the appropriateness of the values herein, the val ues will be reconsidered for the "Adopted" list. Docu mentation is available for each of these substances. 33 SC 16128 LAM024979 TWA Substanceppm*' mg/m^' t AcetylsalicyBc acid (Aspirin).................... t Acrylonitrile................... Aluminum metal and oxide.......................... Aluminum pyro powders. Aluminum welding fumes Aluminum, soluble salts. Aluminum, alkyls (NOC)* 3-Amino 1,2,4-triazole. t AniSne and homologues -- Skin...................... Antimony, soluble salts (as Sb)...................... Antimony trioxide production................. Arsenic (soluble), as As . Arsenic trioxide production................. t Baytex .......................... Benomyl........................ Bromacil....................... t o-sec Butylphenol -- Skin........................... Cadmium oxide production................. t Carbon disulfide............. t Chloroacetyl chloride..... + Chloromethyt methyl ether......................... t /S-Chloroprene -- Skin... Cobalt metal, dust & fume (as Co)............. tc Cyanogen chloride......... Cyclopentane................. t Oalapon........................ +1, 2-Oibromoethane -- Skin........................... t Dichloromonofluoro- methane.................... t Olchloropropene............ + Diethanolamine.............. t Divinyl benzene............. t Epiehlortrydrine--Skin.. --5 Ale Ale -- 10 --5 --5 --2 --2 A2 A2 2 10 --2 -- --,A2 -- 0.2 -- --, Ala -- 0.1 -- 10 -- 10 5-- -- --. A2 10 30 0.05 0.2 Alb Alb 10 45 -- 0.05 0.3 0.6 300 850 1 Ale Ale 10 40 15 3 15 10 50 2 10 STEL ppnt" mg/m^' -- --, ---- __ 20 ---- ---- ---- __ __ ---- 5 20 ---- __ ---- __ -- 0.3 -- 15 -- 20 ---- _ __ __ ---- ---- ___ 0.1 __ 450 1,000 ---- __ 10 50 -- __ __ _ 5 20 Capital letters refer to Appendices. *1978 Revision or Addition. 'Not otherwise classified (NOC). 34 Substance TWA STEL ppm"' mg/m16' ppm*1 mg/m,6> Ethyl silicate.................. t Ethylene dibromide, see 1,2-Dibromoethane... t Ethylene dichloride, see 1, 2-Oichloroethane... C Glutaraldehyde.............. Hexachlorobutadiene..... tc Hydrogen cyanide -- Skin........................... 12-Hydroxypropyl acrylate -- Skin...................... t N-lsopropylaniline -- Skin........................... Manganese fume (as Mn)........................... t Methylene chloride (dichloromethane)..... t 4,4-Methylene dianiline. tc 2-Nitropropane.............. Phenyl-beta- naphthylamine............ t Phosphorous pentachloride............. t Propionic acid............... t Silver, metal.................. t Sodium bisulfite............. t Sodium metabisulfite..... t Sulfur dioxide............... tCTerphenyls..................... t Tetrasodium pyrophosphate.......... t Toluene-2, 4-diisocyanate (TDI)... t Trichloroacetic acid........ t Vinyl bromide............... t Vinyl chloride................. VM & P Naphtha............ 10 Ale 10 0.2 A2 10 0.5 2 -- 100 o.t 25. A2 A2 0.1 10 -- -- -- 2 0.5 -- 0.002. -- 5,A2 5, Ala 300 85 Ale 40 0.8 A2 10 3 10 1 360 0.8 90. A2 A2 1 30 0.1 5 5 5 5 5 0.015 1 20, A2 10, Ala 1,350 30 -- 15 -- -- -- -- 5 -- 500 0.5 -- -- -- 15 -- -- -- 5 -- -- 0.005 -- -- -- 400 250 -- 60 -- -- -- -- 20 3 1,700 4 -- -- -- 45 -- -- -- 15 -- -- 0.035 -- -- -- 1,800 Capital letters refer to Appendices. +1978 Addition. 35 So 1Gl29 LAM024980 NOTICE OF INTENDED CHANGES MINERAL OUSTS Substance t Asbestos Amosite................ Chrysotile............. Crocidolite............ Tremolite............. Other forms......... Diatomaceous earth, natural................. Silica, amorphous... t Talc (fibrous) TLV 0.5 fiber/cc, Ala 2 fibers/cc, Ala 0.2 fiber/cc, Ala 0.5 fiber/cc, Ala 2 fibers/cc, Ala 1.5 mg/m3, Respirable dust 5 mg/m3, Total dust (ail sampled sizes) 2 mg/m3, Respirable dust (< 5 /am) 0.5 fiber/cc APPENDIX A CARCINOGENS The Committee lists below those substances in in dustrial use that have proven carcinogenic in man, or have induced cancer in animals under appropriate exper imental conditions. Present listing of those substances carcinogenic for man takes three forms: Those for which a TLV has been assigned (la), those for which environ mental conditions have not been sufficiently defined to assign a TLV (1b), and (1c), those whose reassignment of a TLV is awaiting more definitive data, and hence should be treated as a 1b carcinogen. Ala. Human Carcinogens. Substances, or substances associated with industrial processes, recognized to have carcinogenic or cocarcinogenic potential, with an assigned TLV: TLV ** Arsenic trioxide production (AsaCb, 0.05 mg/m3 as As) (SO2, C 5.0 ppm) **See Notice of Intended Chances +1978 Addition. 36 ** Asbestos, all forms* bis (Chloromethyl) ether Chromite ore processing (chromate) Nickel sulfide roasting, fume & dust Particulate Polycyclic Aromatic Hydrocarbons (PPAH) Vinyl Chloride (SteCb, 0.5 mg/m3 (as Sb)) (5 fibers/cc, > 5 Mm in length) 0.001 ppm 0.05 mg/m3 (as Cr) 1.0 mg/m3 (as Ni) 0.2 mg/m3, as benzene solubles 5 ppm Alb. Human Carcinogens. Substances, or substances associated with industrial processes, recognized to have carcinogenic potential without an assigned TLV: Chloromethyl methyl ether 4-Aminodiphenyl (p-Xenylamine) Benzidine production beta-Naphthylamine 4-Nitrodiphenyl Ale. Human Carcinogens. Substances with recognized carcinogenic potential awaiting reassignment of TLV pending further data acquisition: Acrylonitrile 1, 2-Dibromoethane (Ethylene dibromide) For the substances in 1b or 1c, no exposure or contact by any route -- respiratory, skin or oral, as detected by the most sensitive methods -- shall be permitted. ``No exposure or contact" means hermitizing the process or operation by the best practicable engi neering methods. The worker should be properly equipped to insure virtually no contact with the carcinogen. 'Cigarette smoking can enhance the incidence of respiratory cancers from this and others of these substances or processes. 37 SC 16130 LAM024981 A2. Industrial Substances Suspect of Carcinogenic Po tential for MAN. Chemical substances or sub stances associated with industrial processes, which are suspect of inducing cancer, based on either (1) limited epidemiologic evidence, exclusive of clinical reports of single cases, or (2) demon stration of carcinogenesis in one or more animal species by appropriate methods. 3-Amino 1,2, 4-triazole ** Antimony trioxide production* Benzene ^ Benz(a)pyrene Beryllium ** Cadmium oxide production Chloroform . Chromates of lead and zinc (as Cr) 3, 3'-Dichlorobenzidine Dimethylcarbamyl chloride 1,1-Dimethyl hydrazine Dimethyl sulfate -- Skin Epichlorhydrin Hexachlorobutadiene Hexamethyl phosphoramide -- Skin Hydrazine Lead chromate 4, 4'-Methylene bis (2-chloroaniline) -- Skin Monomethyl hydrazine C 2-Nitropropane Nitrosamines Phenyl-beta-naphthylamine Propane sultone beta-Propiolactone Vinyl cyclohexene dioxide Zinc chromate (as Cr) (0.5 mg/m3) 10 ppm -- 2.0/zg/m3 (0.05 mg/m3) 10 ppm 0.05 mg/m3 -- -- 0.5 ppm 0.1 ppm 5 ppm -- 0.1 ppm 0.05 mg/m3 0.02 ppm 0.2 ppm 25 ppm -- -- -- -- 10 ppm 0.05 mg/m3 For the above, worker exposure by all routes should be carefully controlled to levels consistent with the animal and human experience data (see Documentation), including those substances with a listed TLV. 'Cigarette smoking can enhance the incidence of respiratory cancers from this or others of these substances or processes. 36 A3. Guidelines for the Classification of Experimental ANIMAL Carcinogens. The following guidelines are offered in the present state of knowledge as an aid in classifying substances in the occupational envi ronment found to be carcinogenic in experimental animals. A need was felt by the Threshold Limits Committee for such a classification in order to take the first step in developing an appropriate TLV for occupational exposure. Determination of Approximate Threshold of Re sponse Requirement. In order to determine in which category to classify an experimental carcin ogen for the purpose of assigning an industrial air limit (TLV), an approximate threshold of neoplastic response must be determined. Because of practi cal experimental difficulties, a precisely defined threshold cannot be attained. For the purposes of standard-setting, this is of little moment, as an ap propriate risk, or safety, factor can be applied to the approximate threshold, the magnitude of which is dependent on the degree of potency of the car cinogenic response. To obtain the best 'practical' threshold of neoplas tic response, dosage decrements should be less than logarithmic. This becomes particularly impor tant at levels greater than 10 ppm (or correspond ing mg/m3). Accordingly, after a range-finding de termination has been made by logarithmic decreases, two additional dosage levels are re quired within the levels of "effect" and "no effect" to approximate the true threshold of neoplastic re sponse. The second step should attempt to establish a me tabolic relationship between animal and man for the particular substance found carcinogenic in an imals. If the metabolic pathways are found compa rable, the substance should be classed highly sus pect as a carcinogen for man. If no such relation is found, the substance should remain listed as an experimental animal carcinogen until evidence to the contrary is found. Proposed Classification of Experimental Animal Carcinogens. Substances occurring in the occupa tional environment found carcinogenic for animals 39 SC 16131 LAM024982 may be grouped into three classes, those of high, intermediate and low potency. In evaluating the in cidence of animal cancers, significant incidence of cancer is defined as a neoplastic response which represents, in the judgment of the Committee, a significant excess of cancers above that occurring in negative controls. EXCEPTIONS: No substance is to be considered an occupational carcinogen of any practical signifi cance which reacts by the respiratoiy route at or above 1000 mg/m3 for the mouse, 2000 mg/m3 for the rat; by the dermal route, at or above 1500 mg/kg for the mouse, 3000 mg/kg for the rat; by the gastrointestinal route at or above 500 mg/kg/d for a lifetime, equivalent to about 100 g T.O. for the rat, lOg T.D. for the mouse. These dosage limitations exclude such substances as dioxane and trichlorethylene from consideration as carcinogens. Examples; Dioxane -- rats, hepatocellular and nasal tumors from 1015 mg/kg/d, oral Trichloroethylene -- female mice, tumors (30/98 @ 900 mg/kg/d), oral A3a. INDUSTRIAL SU8STANCES OF HIGH CARCINO GENIC POTENCY IN EXPERIMENTAL ANIMALS 1. A substance to qualify as a carcinogen of high potency must fulfill one of the three following conditions in two animal species; la. Respiratory, Elicit cancer from (1) dosages below 1 mg/m3 (or equivalent ppm) via the respiratory tract in 6- 7-hour daily repeated inhalation exposures throughout lifetime; or (2) from a single intratracheally admin istered dose not exceeding 1 mg of parti culate, or liquid, per 100 ml or less of an imal minute respiratory volume; Examples: bis-Chloromethyl ether, malign ant tumors, rats, @ 0.47 mg/m3 (0.1 ppm) in 2 years; 40 Hexamethyl phosphoramide, nasal squamous cell carcino ma, rats, @ 0.05 ppm, in 13 months OR lb. Dermal. Elicit cancer within 20 weeks by skin-painting, twice weekly at 2 mg/kg body weight or less per application for a total dose equal to or less than 1.5 mg, in a biologically inert vehicle; Examples: 7, 12-Dimethylbenz(a)anthra cene -- skin tumors @ 0.120.8 mg T.D. in four weeks Benz(a)pyrene, mice 12 *ig, 3X/wk for 18 mos. T.D. 2.6 mg, 90.9% skin tumors OR lc. Gastrointestinal. Elicit cancer by daily in take via the gastrointestinal tract, within six months, with a six-month holding period; at a dosage below 1 mg/kg body weight per day; total dose, rat, = 50 mg; mouse, 3.5 mg; Examples: 7, 12-Dimethylbenz(a)anthracene -- mammary tumors from 10 mg IX 3-Methylcholanthrene -- Tumors @ 3 sites from 8 mg in 89 weeks Benz(a)pyrene, mice, 3.9% jeukemias, from 30 mg T.D. 198 days 2. Elicit cancer by all three routes in at least two animal species at dose levels prescribed for hi$h or intermediate potency. A3b.INDUSTRIAL SUBSTANCES OF INTERMEDIATE CARCINOGENIC POTENCY IN EXPERIMENTAL AN IMALS To qualify as a carcinogen of intermediate potency, a substance should elicit cancer in two animal spe- 41 16132 LAM024983 ties at dosages intermediate between those de scribed in A3a and A3c by two routes of adminis tration. Example: Carbamic acid ethyl ester Dermal, mammary tumors, mice, 100%, 63 weeks, 500-1400 mg T.D. Gastrointestinal, various type tumors, mice 42 weeks, 320 mg T.D. Gastrointestinal, various type tumors, rats, 60 weeks, 110-930 mg T.D. A3c. INDUSTRIAL SUBSTANCES OF LOW CARCINO GENIC POTENCY IN EXPERIMENTAL ANIMALS To qualify as a carcinogen of low potency, a sub stance should elicit cancer in one animal species by anyone of three routes of administration at the following prescribed dosages and conditions: la. Respiratory. Elicit cancer from (1) dosages greater than 10 mg/m3 (or equivalent ppm) via the respiratory tract in 6- 7-hour, daily re peated inhalation exposures, for 12 months' exposure and 12 months' observation period; or (2) from intratracheally administered dos ages totaling more than 10 mg of particulate or liquid per 100 ml or more of animal minute respiratory volume; Examples: Beryl (beryllium aluminum silicate) malig. lung tumors, rats, @ 15 mg/m3 @ 17 months Benzidine, var. tumors, rats, 10-20 mg/m3 @ > 13 mos. OR lb. Dermal. Elicit cancer by skin-painting of mice in twice weekly dosages of > 10 mg/kg body weight in a biologically inert vehicle for at least 75 weeks, i.e., ^ 1.5g T.D. Examples: Shale tar, mouse, 0.1 ml x 50 g T.D. 59/60 skin tumors Arsenic trioxide, man, dose un known, but estimated to be high lc. Gastrointestinal. Elicit cancer from daily oral 42 dosages of 50 mg/kg/day or greater during the lifetime of the animal. APPENDIX B SUBSTANCES OF VARIABLE COMPOSITION B1 Polytetralluoroethytene* decomposition products. Thermal decomposition of the fluorocarbon chain in air leads to the formation of oxidized products con taining carbon, fluorine and oxygen. Because these products decompose in part by hydrolysis in alkaline solution, they can be quantitatively determined in air as fluoride to provide an index of exposure. No TLV is recommended pending determination of the toxi city of the products, but air concentrations should be minimal. B2 Gasoline. The composition of gasoline varies greatly and thus a single TLV for all types of these materials Is no longer applicable. In general, the aromatic hy drocarbon content will determine what TLV applies. Consequently the content of benzene, other aromat ics and additives should be determined to arrive at the appropriate TLV (Elkins, et al. A.I.H.A.J. 24:99, 1963); Runion, ibid.36, 338,1975). B3 Welding Fumes -- Total Particulate chocr* TLV, Smglm3 Welding fumes cannot be classified simply. The com position and quantity of both are dependent on the alloy being welded and the process and electrodes used. Reli able analysis of fumes cannot be made without consider ing the nature of the welding process and system being examined; reactive metals and alloys such as aluminum and titanium are arc-welded in a protective, inert atmo sphere such as argon. These arcs create relatively little fume, but an intense radiation which can produce ozone. Similar processes are used to arc-weld steels, also creating a relatively low level of fumes. Ferrous alloys also are arc-welded in oxidizing environments which generate considerable fume, and can produce carbon monoxide instead of ozone. Such fumes generally are composed of discreet particles of amorphous slags con- *Trade Names: Algoflon. Fluon. Hakm. Teflon, Tefran. "Not otherwise classified (N0C). 43 sc "16133 LAM024984 taining iron, manganese, silicon and other metallic COflstituents depending on the alloy system involved. Chro mium and nickel compounds are found in fumes when stainless Steels are arc-welded. Some coated and fluxcored electrodes are formulated with fluorides and the fumes associated with them can contain significantly more fluorides than oxides. Because of the above fac tors, arc-welding fumes frequently must be tested for individual constituents which are likely to be present to determine whether specific TLV's are exceeded. Conclu sions based on total fume concentration are generally adequate if no toxic elements are present m welding rod, meted, or metal coating and conditions are not conducive to the formation of toxic gases. Most welding, even with primitive ventilation, does not produce exposures inside the welding helmet above 5 mg/m3. That which does, should be controlled. APPENOIX C MIXTURES C.1 THRESHOLD LIMIT VALUES FOR MIXTURES When two or more hazardous substances are pres ent, their combined effect, rather than that of either indi vidually, should be given primary consideration. In the absence of information to the contrary, the effects of the different hazards should be considered as additive. That is, if the sum of the following fractions, exceeds unity, then the threshold limit of the mixture should be considered as being exceeded. Ci Indicates the observed atmospheric concentration, and Ti the cor responding threshold limit (See Example 1A.a. and 1A.c.). Exceptions to the above rule may be made when there is a good reason to believe that the chief effects of the different harmful substances are not In fact additive, -hvHrrdependent as when purely local effects on different organs of the body are produced by the various compo nents of the mixture. In such cases the threshold limit ordinarily is exceeded only when at least one member of 44 the series + or + etc.j itself has a value exceeding unity (See Example 1A.c.). Antagonistic action or potentiation may occur with some combinations of atmospheric contaminants. Such cases at present must be determined individually. Poten tiating or antagonistic agents are not necessarily harmful by themselves. Potentiating effects of exposure to such agents by routes other than that of inhalation is also possible, e.g. imbibed alcohol and inhaled narcotic (trichloroethylene). Potentiation is characteristically exhi bited at high concentrations, less probably at low. When a given operation or process characteristically emits a number of harmful dusts, fumes, vapors or gases, it will frequently be only feasible to attempt to evaluate the hazard by measurement of a single sub stance. In such cases, the threshold limit used for this substance should be reduced by a suitable factor, the magnitude of which will depend on the number, toxicity and relative quantity of the other contaminants ordinarily present. Examples of processes which are typically associated with two or more harmful atmospheric contaminants are welding, automobile repair, blasting, painting, lacquer ing, certain foundry operations, diesel exhausts, etc. CM Examples of THRESHOLD LIMIT VALUES FOR MIXTURES The following formulae apply only when the compo nents in a mixture have similar toxicologic effects; they should not be used for mixtures with widely differing reactivities, e.g. hydrogen cyanide & sulfur dioxide. In such case the formula for Independent Effects (1A.c.) should be used. lA.a. General case, where air is analyzed for each com ponent: a. Additive effects. (Note: It is essential that the atmosphere be analyzed both qualitatively and quantitatively for each component present, in order to evaluate compliance or noncom pliance with this calculated TLV.) 45 SC 16134 U/W024985 Example No. 1A.a.: Air contains 400 ppm of acetone (TLV = 1000 ppm) 150 ppm of secbutyl acetate (TLV = 200 ppm) and 100 ppm of 2-butanone (TLV = 200 ppm) 400 1000 Atmospheric concentration of mix ture = 400 + 150 + 100 = 650 ppm of mixture 100 200 = 0.4 + 0.75 + 0.5 = 1.65 Threshold Limit is exceeded. lA.b. Special case when the source of contaminant is a liquid mixture and the atmospheric composition is assumed to be similar to that of the original mate rial; e.g. on a time-weighted average exposure basis, all of the liquid (solvent) mixture eventually evaporates. Additive effects (approximate solution) 1. The percent composition (by weight) of the liquid mixture is known, the TLVs of the constituents must be listed in mg/m3. (Note: In order to evaluate compliance with this TLV, field sampling instruments should be calibrated, In the laboratory, for response to this specific quantitative and qualitative airvapor mixture, and also to fractional concen trations of this mixture: e.g., 112 the TLV; 1/10 the TLV; 2 x the TLV; 10 x the TLV; etc.) TLV of mixture = 1 f. fc tc f TLVa + TLV,, + TLV, + ` ` ' TLV, Example No. 1; Liquid contains (by weight) 50% heptane: TLV = 400 ppm or 1600 mg/m3 1 mg/m3 0.25 ppm 30% methyl chloroform: TLV = 350 ppm or 1900 mg/m3 1 mg/m3 == 0.28 ppm 46 1 I I I 20% perchloroethylene: TLV = 100 ppm or 670 mg/m3 1 mg/m3 = 0.15 ppm TLV of Mixture = 0,5 1 0.3 0.2 1600 + 1900 + 670 1 0.00031 + 0.00016 + 0.00030 1 = 1300 mg/m3 0.00077 of this mixture 50% or (1300) (0.5) = 650 mg/m3 is heptane 30% or (1300) (0.3) = 390 mg/m3 is methyl chloro form 20% or (1300) (0.2) = 260 mg/m3 is perchloroethylene These values can be converted to ppm as follows: heptane: 650 mg/m3 x 0.25 = 162 ppm methyl chloroform: 390 mg/m3 x 0.18 = 70 ppm perchloroethylene: 260 mg/m3 x 0.15 = 39 ppm TLV of mixture = 162 + 70 + 39 = 271 ppm, or 1300 mg/m3 1 A. c. Independent effects. Air contains 0.15 mg/m3 of lead (TLV, 0.15) and 0.7 mg/m3 of sulfuric acid (TLV, 1). M5=1; 0.15 _07 = 0.7 1 Threshold limit is not exceeded. 18. TLV for Mixtures of Mineral Dusts. For mixtures of biologically active mineral dusts the general formula for mixtures may be used. For mixture containing 80% nonasbestiform talc and 20% quartz, the TLV for 100% of the mixture is given by: TLV = ----1 = 9 mppcf 0.8 ( 0,2 20 2.7 TLV of nonasbestiform talc (pure) = 20 mppcf 47 *6135 LA A/1024986 TLV of quartz (pure) 300 100 + 10 = --300 = 2.7 mppcf Essentially the same result will be obtained if the limit of the more (most) toxic component is used provided the effects are addifive. In the above ex ample the limit for 20% quartz is 10 mppcf. For another mixture of 25% quartz, 25% amor phous silica and 50% talc: 25% quartz -- TLV (pure) = 2.7 mppcf 25% amorphous silica -- TLV (pure) = mppcf 50% talc TLV (pure) = 20 mppcf TLV -------------------- !------0.25 j 0.25 0T= 8 mPPcf 2.7 20 20 The limit for 25% quartz approximates 9 mppcf. APPENDIX D PERMISSIBLE EXCURSIONS FOR TIME- WEIGHTED AVERAGE (TWA) LIMITS The Excursion TLV Factor in the Table automatically defines the magnitude of the permissible excursion above the limit for those substances not given a "C" designation: i.e., the TWA limits. Examples in the Table show that nitrobenzene, the TLV for which is 1 ppm, should never be allowed to exceed 3 ppm. Similarly, carbon tetrachloride, TLV =10 ppm, should never be allowed to exceed 20 ppm. By contrast, those sub stances with a "C" designation are not subject to the excursion factor and must be kept at or below the TLV ceiling. These limiting excursions are to be considered to provide a "rule-of-thumb" guidance for listed sub stances generally, and may not provide the most appro priate excursion for a particular substance e.g., the per missible excursion for CO is 400 ppm for 15 minutes. For appropriate excursions for 142 substances con sult Pa. Rules & Regs., Chap. 4, Art. 432, and "Accept able Concentrations," ANSI. 48 Substance Nitrobenzene Carbon tetrachloride Trimethyl benzene Acetone Boron trifluoride Butylamine Excursion TLV Factor 1 10 25 1000 Cl C5 3 2 1.5 1.25 w-- Max. Cone. Permitted for short time 2 20 35 1250 1 5 EXCURSION FACtORS For all substances not bearing C notation TLV>0-1 (ppm or mg/m3), TLV> 1-10 " TLV>10-100 " TLV> 100-1000 " Excursion Factor " " =3 =2 = 1.5 = 1.25 The number of times the excursion above the TLV is permitted is governed by conformity with the TimeWeighted Average TLV. INTERPRETATION OF MEASURED PEAK CONCENTRATIONS With increasing use of rapid, direct-reading analytical instruments for airborne contaminants in the work area, the question of interpretation of essentially "instanta neous" peaks arises. Although no general statement can be made covering all occupational substances, the fol lowing guidelines should prove helpful, assuming peak excursions conform to time-weighted average TLV as stated above. The toxicologic importance of momentary peak con centrations depends on whether the substance is fast or slow acting. If slow acting, as for quartz, lead, or car bon monoxide, momentary peaks are of no toxicologic concern provided, of course, they are not astronomic. On the other hand, fast-acting substances that rapidly produce disabling narcosis, e.g., H2S, or intolerable irri tation or asphyxiation, NHa, SO2, CO2, or initiate sensitiza tion-- the organic isocyanates, even "instantaneous" peaks appreciably above the permissible excursion, should not be permitted, unless information exists to the 49 SC 16136 LAM024987 contrary. Other more specific excursions will be devel oped in the future. APPENDIX E Some Nuisance Particulates'' TLV, 30 mppcf or 10mg/m3 of total dust < 1% quartz, or, 5 mg/m3 respirable dust Alundum (Ab Os) Calcium carbonate Calcium silicate Cellulose (paper fiber) Portland Cement Corundum (AbCh) Emery Glycerin Mist Graphite (synthetic) Gypsum Vegetable oil mists (except castor, cashew nut, or similar irritant oils) Kaolin Limestone Magnesite Marble Mineral Wool Fiber Pentaerythritol Plaster of Paris Rouge Silicon Silicon Carbide Starch Sucrose Tin Oxide Titanium Dioxide Zinc Stearate Zinc oxide dust p) When toxic impurities are not present, e.g. quartz < 1%. APPENDIX F Some Simple Asphyxiants" Acetylene Argon Butane Ethane Ethylene Helium Hydrogen Methane Neon Propane Propylene q) As defined on pg. 6. APPENOIX G Calculations for Conversion of Particle Count Concen tration (by Standard Light Field -- Midget Impinger Techniques), in mppcf, to Respirable Mass Concentra tion (by Respirable Sampler) in mg/m3.t * "Relationship Between Gravimetric Respirable Dust Concentration and Midget Impinger Number Concentration." by Murray Jacobson and T. f. Tomb. AIHAJ, 28: Nov.-Dee. 1967. 50 1. In 1967, Jacobsen and Tomb.t derived an empiri cal relationship of 5.6 mppcf to 1 milligram of respirable dust per cubic meter of air, based on 23 sets of samples, mostly coal dust. The follow ing calculation results in an equivalence of 6.37 mppcf to 1 mg/m3 of respirable dust. Thus, an approximate ratio of 6 mppcf to 1 mg/m3 of re spirable dust is suggested for conversion of TLVs from a count to a mass basis when the density and mass median diameter have not been deter mined. 2. Basic assumptions: a) Average density for silica containing dusts ~ 2.5 gms/cm3 (2500 mg/cm3). Pulmonary sig nificant dust densities may vary from 1.2 gm/cm3 for coal dust to 3.1 gms/cm3 for Portland Cement. Silica densities vary from 2.2 (amorphous) to 2.3 (cristobalite and tridymite) to 2.5 (alpha-quartz.) gms per cm3. b) The mass median diameter (mmd) of particles collected in midget impinger samplers and counted by the standard light field technique, and collected in a respirable sampler is ap proximately 1.5 /xm or 1.5 x 10-4 cm. This assumption is, of course, quite arbitrary since the mmd of all dust clouds is quite variable, depending on many independent parameters, such as source of dust, age of dust cloud, me teorological conditions, etc. 3. Calculation: a) vol. per particle: 4/3 it r3; r = 0.75 x 10~4 cm = 4/3 * tt * (0.75 x 10-)3 = 1.77 x 10-13 cm3 b) wt. per particle = vol. x density = 1.77 x 10-,J cm3 x 2.5 x io3 mg/cm3 = 4.425 x 10_S mg/particle c) 1 particle/ft.3 = 35.5 part./m3 (since 35.5 cu ft = 1 cu m.) 10s part./ft3 = mppcf = 35.5 x 10s part./m3 51 SC 16137 LAM024988 Wt. of 1 mppcf 35.5 x io part./m3 x 4.425 x 10_ mg/part. 1 mppcf 0.157 mg/m3 or 6.37 mppcf * 1 mg/m3 or approximately 6 mpccf mg/m3. 1 4. Equivalent TLVs in mppcf and mg/m3 (respirable mass) for Mineral Ousts. Substance Threshold Limit Value Count Resp. Mass Total Mass' mppcf ..mg/m3 mg/m3 Silica (SiOi) Amorphous Cristobalite Fused silted Quartz Tridymite Coal Dust Diatomaceous earth, natural Graphite (natural) Mica Mineral wool fiber Nuisance particulates Perlite Portland Cement Soapstone Talc (nohasbestiform) Tripoli 20 1.5 3 3 1.5 (12) 15 20 -- 30 30 30 20 20 (3) (3)** 0.05 0.1 0.1 0.05 2 1.5 (2-5) (3) (5) (5) (S) (5) (3) (3) 0.1 (6) 0.15 0.3 0.3 0.15 (4) (5) (6) 10 io (10) (10) (6) (6) (0.3) TLVs Threshold Limit Values for Physical Agents Adopted by ACGIH for 1978 `Unless Whetwise specified, respirable mass is presumed to equal ap proximately 50% of total mass. "AH values in parentheses ( ) represent newly calculated values based on equivalence of 6 mppcf - 1 mg/m3 respirable mass and respir able mass " 50% total mass. 52 SC 16138 LAM024989 1978 TLV PHYSICAL AGENTS COMMITTEE Herbert H. Jones, Central Missouri State University, Chairman Peter A. Breysse, University of Washington Gerald V. Coles, Dept, of Public Health -- Australia Thomas Cummings, Dept, of Health -- Ontario, Canada Irving H. Davis, Dept, of Health -- Michigan Ronald D. Dobbin, NIOSH LCDR Joseph J. Drozd, USN Dr. Allan P. Heins, OSHA LCDR Richard Johnson, USN LTC. George S. Kush, USAF Edward J. Largent, OSHA William E. Murray, NIOSH Dr. Wordie H. Parr, NIOSH David H. Sliney, USAEHA LTC Robert T. Wangemann, USAEHA Thomas K. Wilkinson, USPHS-NIH Any comments or questions regarding these limits should be addressed to: Executive Secretary P.O. Box 1937 Cincinnati, Ohio 45201 PREFACE PHYSICAL AGENTS These threshold limit values refer to levels of physical agents and represent conditions under which it is be lieved that nearly all workers may be repeatedly exposed day after day without adverse effect. Because of wide variations in individual susceptibility, exposure of an oc casional individual at, or even below, the threshold limit may not prevent annoyance, aggravation of a pre-exist ing condition, or physiological damage. These threshold limits are based on the best available information from industrial experience, from experimen tal human and animal studies, and when possible, from a combination of the three. These limits are intended for use in the practice of industrial hygiene and should be interpreted and applied only by a person trained in this discipline. They are not intended for use, or for modification for use, (1) in the evaluation or control of the levels of physical agents in the community, (2) as proof or disproof of an existing physical disability, or (3) for adoption by countries whose working conditions differ from those in the United States of America. These values are reviewed annually by the Committee on Threshold Limits for Physical Agents for revisions or additions, as further information becomes available. Notice of Intent -- At the beginning of each year, proposed actions of the Committee for the forthcoming year are issued in the form of a "Notice of Intent." This notice provides not only an opportunity for comment, but solicits suggestions of physical agents to be added to the list. The suggestions should be accompanied by substantiating evidence. As Legislative Code -- The Conference recognizes that the Threshold Limit Values may be adopted in legis lative codes and regulations. If so used, the intent of the concepts contained in the Preface should be maintained and provisions should be made to keep the list current. 55 sc 16139 LAM024990 Reprint Permission -- This publication may be re printed provided that written permission is obtained from the Executive Secretary of the Conference and that this Preface be published in its entirety along with the Threshold Limit Values. THRESHOLD LIMIT VALUES HEAT STRESS These Threshold Limit Values refer to heat stress conditions under which it is believed that nearly all workers may be repeatedly exposed without adverse health effects. The TLVs shown in Table 1 are based on the assumption that nearly all acclimatized, fully clothed workers with adequate water and salt intake should be able to function effectively under the given working con ditions without exceeding a deep body temperature of 38C (WHO technical report series #412, 1969 Health Factors Involved in Working Under Conditions of Heat Stress-, F. N. Dukes-Dobos and A. Henschel: "Develop ment of Permissible Heat Exposure Limits for Occupa tional Work." ASHRAE Journal, Vol. 15: No. 9, Sep tember 1973, pp. 57-62.) Since measurement of deep body temperature is im practical for monitoring the workers' heat load, the mea surement of environmental factors is required which most nearly correlate with deep body temperature and other physiological responses to heat. At the present time Wet Bulb^lobe Temperature Index (WBGT) is the simplest and most suitable technique to measure the en vironmental factors. WBGT values are calculated by the following equations: 1. Outdoors with solar load: WBGT = 0.7WB + 0.2GT + 0.1 DB 2. Indoors or Outdoors with no solar load: WBGT = 0.7WB + 0.3GT where: WBGT = Wet Bulb-Globe Temperature Index WB = Natural Wet-Bulb Temperature DB = Dry-Bulb Temperature GT = Globe Thermometer Temperature 56 The determination of WBGT requires the use of a black globe thermometer, a natural (static) wet-bulb thermom eter, and a dry-bulb thermometer. TABLE 1 Permissible Heat Exposure Threshold Limit Values (Values are given in C. WBGT) Work Load Work -- Rest Regimen Light Moderate Heavy Continuous work 30.0 26.7 25.0 75% Work -- 25% Rest, Each hour 30-6 28.0 25.9 50% Work -- 50% Rest, Each hour 31.4 29.4 27.9 25% Work -- 75% Rest, Each hour 32.2 3t.1 30.0 Higher heat exposures than shown in Table 1 are per missible if the. Workers have been undergoing medical, surveillance arid'"it has been established that they are more tolerant to Vrork' ln heat than the average worker.; Workers should n.bt be permitted to continue their Work when their deep bodytemperature exceeds 38.0C EVALUATION ANO CONTROL I. Measurement of the Environment The instruments required are a dry-bulb, a natural wet-bulb, a globe thermometer, and a stand. The mea surement of the environmental factors shall be per formed as follows: A. The range of the dry and the natural wet bulb ther mometer shall be -5C to 50C with an accuracy of 0.5C. The dry bulb thermometer must be shielded from the sun and the other radiant surfaces of the envi ronment without restricting the airflow around the bulb. The wick of the natural wet-bulb thermometer shall be 57 161^0 SC LAM024991 kept wet with distilled water for at least 1/2 hour before the temperature reading is made. It is not enough to immerse the other end of the wick into a reservoir of distilled water and wait until the whole wick becomes wet by capillarity. The wick shall be wetted by direct application of water from a syringe 1/2 hour before each reading. The wick shall extend over the bulb of the ther mometer, covering the stem about one additional bulb length. The wick should always be clean and new wicks should be washed before using. B. A globe thermometer, consisting of a 15 cm. (6inch) diameter hollow copper sphere painted on the outside with a matte black finish or equivalent, shall be used. The bulb or sensor of a thermometer (range -5C to 100C with an accuracy of D.5C) must be fixed in the center of the sphere. The globe thermometer shall be exposed at least 25 minutes before it is read. C. A stand shall be used to suspend the three thermom eters so that they do not restrict free air flow around the bulbs, and the wet-bulb and globe thermometer are not shaded. 0. It is permissible to use any other type of temperature sensor that gives identical reading as that of a mercury thermometer under the same conditions. E. The thermometers must be so placed that the read ings are representative of the condition where the men work or rest, respectively. The methodology outlined above is more fully ex plained in the following publications: 1. "Prevention of Heat Casualties in Marine Corps Re cruits, 1955-1960, with Comparative Incidence Rates and Climatic Heat Stresses in other Training Catego ries," by Captain David Minard, MC, USN, Research Re port No. 4, Contract No. MR005.01-0001.01, Naval Medical Research Institute, Bethesda, Maiyland, 21 Feb ruary 1961. 2. "Heat Casualties in the Navy and Marine Corps, 1959-1962, with Appendices on the Field Use of the Wet Bulb-Globe Temperature Index," by Captain David Minard, MC, USN, and R. L. O'Brien, HMC, USN. Re search Report No. 7, Contract No. MR 005.01-0001.01, Naval Medical Research Institute, Bethesda, Maryland, 12 March 1964. 58 3. Minard, D.: Prevention of Heat Casualties in Marine Corps Recruits. Military Medicine 126(4): 261-272, 1961. II. Work Load Categories Heat produced by the body and the environmental heat together determine the total heat load. Therefore, if work is to be performed under hot environmental condi tions, the workload category of each job shall be es tablished and the heat exposure limit pertinent to the work load evaluated against the applicable standard in order to protect the worker from exposure beyond the permissible limit. A. The work load category may be established by rank ing each job into light, medium, and heavy categories on the basis of type of operation. Where the work load is ranked into one of sard three categories, i.e. (1) light work (up to 200 Kcal/hr or 800 Btu/hr): e.g., sitting or standing to control machines, performing light hand or arm work, (2) moderate work (200-350 Kcal/hr or 800-1400 Btu/hr): e.g., walking about with moderate lifting and pushing, (3) heavy work (350-500 Kcal/hr or 1400-2000 Btu/hr): e.g., pick and shovel work, the permissible heat exposure limit for that work load shall be determined from Table 1. B. The ranking of the job may be performed either by measuring the worker's metabolic rate while performing his job or by estimating his metabolic rate by the use of the scheme shown in Table 2. Tables available in the literature listed below and in other publications as well may also be utilized. When this method is used the per missible heat exposure limit can be determined by Figure 1. 1. Per-Olaf Astrand and Kaare Rodahl: "Textbook of Work Physiology" McGraw-Hill Book Company, New York, San Francisco, 1970. 2. "Ergonomics Guide to Assessment of Metabolic and Cardiac Costs of Physical Work." Amer. Ind. Hyg. Assoc. J.32: 560, 1971. 3. Energy Requirements for Physical Work. Purdue 59 16141 SC LAM024992 Farm Cardiac Project. Agricultural Experiment Station. Research Progress Report No. 30,1961. 4. J. V. G. A. Dumin and R. Passmore: "Energy, Work and Leisure." Heinemann Educational Books, Ltd., Lon don, 1967. TABLE 2 Assessment of Work Load Average values of metabolic rate during different ac tivities. A. Body position and movement Sitting Standing Walking Walking up hill Kcal./min. 0.3 0.6 2.0-3.0 add 0.8 per meter (yard) rise B. Type of Work Average Range Kcal./min. Kcal./min. Hand work light heavy Work with one arm light heavy Work with both arms light heavy Work with body light moderate heavy very heavy 0.4 0.9 1.0 1.8 1.5 2.5 3.5 5.0 7.0 9.0 0.2-1.2 0.7-2.5 1.0-3.5 2.5-15.0 Light hand work: writing, hand knitting Heavy hand work: typewriting Heavy work with one arm: hammering in nails (shoe maker, upholsterer) Light work with two arms: filing metal, planing wood, raking of a garden 60 Moderate work with the body: cleaning a floor, beat ing a carpet Heavy work with the body: railroad track laying, digging, barking trees Sample Calculation: Using a heavy hand tool on an assembly line A. Walking along 2.0 Kcal./min. B. Intermediate value between heavy work with two arms and light work with the body 3.0 Kcal./min. C. Add for basal metabolism 5.0 Kcal./min. 1.0 Kcal./min. Total 6.0 Kcal./min. Adapted from Lehmann, G. E., A. Muller and H. Spitzer: Der Kalorienbedarf bei gewerblicher Arbeit. Arbeitsphysiol. 14: 166,1950. III. Work-Rest Regimen The permissible exposure limits specified in Table 1 and Figure 1 are based on the assumption that the WBGT value of the resting place is the same or very close to that of the work place. Where the WBGT of the work area is different from that of the rest area a timeweighted average value should be used for both environ mental and metabolic heat. When time-weighted average values are used the appropriate curve on Figure 1 is the solid line labeled "continuous." The time-weighted average metabolic rate (M) shall be determined by the equation: Av. M = (Mi) x (h) + (MQ x (fa) + .... + (M,) x (t.) (ti) + (fc) + ... . + (t) Where Mi M2, M,, are estimated or measured metabolic rates for the various activities of the worker during the total time period, ti, b. t, are the elapsed times in min utes spent at the corresponding metabolic rate as deter mined by a time study. The time-weighted average WBGT shall be deter mined by the equation: 61 SC 16142 LAM024993 Av. WBGT = (WBGTi) x (ti) + (WBGT2) x b + .,, + (WBGT.) x (t.) (ti) + (b) + .. . + (t.) where WBGTi, WBGT2, WBGT. are calculated values of WBGT for the various work and rest areas occupied dur ing total time periods, ti. ti. U are the elapsed times in minutes spent in the corresponding areas which are de termined by a time study. Where exposure to hot envi ronmental conditions is continuous for several hours or the entire work day, the time-weighted averages shall be calculated as hourly time-weighted average i.e., ti + b + ... t, = 60 minutes. Where the exposure is intermit tent, the time-weighted averages shall be calculated as two-hour time-weighted averages, i.e., ti + b + . .. t, = 120 minutes. The permissible exposure limits for continuous work are applicable where there is a work-rest regimen of a 5-day work week and an 8-hour work day with a short morning and afternoon break (approximately 15 min utes) and a longer lunch break (approximately 30 min utes). Higher exposure limits are permitted if additional resting time is allowed. All breaks, including unsche duled pauses and administrative or operational waiting periods during work may be counted as rest time when additional rest allowance must be given because of high environmental temperatures. It is a common experience that when the work on a job is self-paced, the workers will spontaneously limit their hourly work load to 30-50% of their maximum physical performance capacity. They do this either by setting an appropriate work speed or by interspersing unscheduled breaks. Thus the daily average of the workers' metabolic rate seldom exceeds 330 kcal/hr. However, within an 8-hour work shift there may be periods where the workers' hourly average metabolic rate will be higher. IV. Water and Salt Supplementation During the hot season or when the worker is exposed to artificially generated heat, drinking water shall be made available to the workers in such a way that they are stimulated to frequently drink small amounts, i.e., one cup every 15-20 minutes (about 150 ml or 1/4 pint). 62 The water shall be kept reasonably cool (10-15C or 50.0-60.0F) and shall be placed close to the work place so that the worker can reach it without abandoning the work area. The workers should be encouraged to salt their food abundantly during the hot season and particularly during hot spells. If the workers are unacclimatized, salted drinking water shall be made available in a concentration of 0.1% (1 g NaCI to 1.0 liter or 1 level tablespoon of salt to 15 quarts of water). The added salt shall be complete ly dissolved before the water is distributed, and the water shall be kept reasonably cool. V. Other Considerations A. Clothing: The permissible heat exposure TLVs are valid for light summer clothing as customarily worn by workers when working under hot environmental condi tions. If special cothing is required for performing a par ticular job and this clothing is heavier or it impedes sweat evaporation or has higher insulation value, the worker's heat tolerance is reduced, and the permissible heat exposure limits indicated in Table 1 and Figure 1 are not applicable. For each job category where special clothing is required, the permissible heat exposure limit shall be established by an expert. B. Acclimatization and Fitness: The recommended heat stress TLVs are valid for acclimated workers who are physically fit. 63 Sc 16143 LAM024994 -J L 0 8 M <00 100 IZ00 1600 2000 BTU/hr Rote of Work Hgura 1 -- Permissible Heat Exposure Threshold Limit Value 64 IONIZING RADIATION The recommendations of the National Council on Radia tion Protection and Measurements (NCRP) are suggest ed as threshold limit values to which nearly all workers may be exposed without adverse effects. The limits should be used as guides for the control of exposure and should not be regarded as fine lines between safe and dangerous levels. The underlying philosophy of radi ation protection is to keep all exposures as low as rea sonably achievable. The two basic reference documents are as follows: a. "Basic Radiation Protection Criteria," NCRP Re port No. 39, issued January 15,1971. b. "Maximum Permissible Body Burdens and Max imum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure," US Depart ment of Commerce, National Bureau of Standards Hand book 69, issued June 5,1959, with Addendum 1 issued August 1963. Available as NCRP Report No. 22. The above documents, as well as information on nu merous other NCRP Reports addressing specific sub jects in ionizing radiation protection are available from: NCRP Publications, 7910 Woodmont Ave., Washington, DC 20014. LASERS The threshold limit values are for exposure to laser radiation under conditions to which nearly all workers may be exposed without adverse effects. The values should be used as guides in the control of exposures and should not be regarded as fine lines between safe and dangerous levels. They are based on the best avail able information from experimental studies. Limiting Apertures The TLVs expressed as radiant exposure or irradiance in this section may be averaged over an aperture of 1 mm except for TLVs for the eye in the spectral range of 400-1400 nm, which should be averaged over a 7 mm limiting aperture (pupil); and except for all TLVs for wa velengths between 0.1-1 mm where the limiting aper ture is 10 mm. No modification of the TLVs is permitted for pupil sizes less than 7 mm. 16144 LAM024995 The TLVs for "extended sources" apply to sources which subtend an angle greater than a (Table 5) which vanes with exposure time. This angle is not the beam divergence of the source. Correction Factors A and B (CA and CB) The TLVs for ocular exposure in Tables 3 and 4 are to be used as given for all wavelength ranges. The TLVs for wavelengths between 700 nm and 1049 nm are to be increased by a uniformly extrapolated factor (CA) as shown in Figure 2. Between 1049 nm and 1400 nm, the TLV has been increased by a factor (C^) of five. For certain exposure times at wavelengths between 550 nm and:700 nm, correction factor (C) must be applied. The TLVs for skin exposure are given in Table 6. The TLVs are to be increased by a factor (CA) as shown in Figure 2 for wavelengths between 700 nm and 1400 nm. To aid in the determination of TLVs for exposure durations requiring calculations of fractional powers Figures 3, 4, 5 and 6 may be used. Repetitively Pulsed Lasers Since there are few experimental data for multiple pulses, caution must be used in the evaluation of such exposures. The protection standards for irradiance or ra diant exposure in multiple pulse trains have the following limitations: (1) The exposure from any single pulse in the train is limited to the protection standard for a single compara ble pulse. (2) The average irradiance for a group of pulses is limited to the protection standard as given in Tables 3, 4, or 6 of a single pulse of the same duration as the entire pulse group. (3) When the Instantaneous Pulse Repetition Fre quency (PRF) of any pulses within a train exceeds one, the protection standard applicable to each pulse is re duced as shown in Figure 6 for pulse durations less than 10'5 second. For pulses of greater duration, the follow ing formula should be followed: 66 Standard (pulse nr) n where: n = number of pulses in train r = duration of a single pulse in the train Standard (rtr) = protection standard of one pulse having a duration equal to nr sec onds. 67 sc 16145 LAM024996 SC 16146 Correction Factor A (Q<) Figure 3a -- TtV lor Intrabeam (direct) viewing of laser beam (400-700 nm). LAM024997 sc 16147 LAM024998 EXPOSURE DURATION ( ) sc 16148 LAM024999 Figure 5a -- TLV tor extended sources or diffuse reflections of laser radiation (400-700 nm). PULSE REPETITION FNEOUENCT, PNF I HI I Figure 6 -- Multiplicative correction factor for repetitively pulsed lasers having pulse durations less than E 10~* second. TIV for a single pulse of the pulse train is multipGed by the above correction factor. Correction factor for PRF greater than 1000 Hz is 0.06. 74 SC 16149 75 LAM025000 T E oE s o ts = -- J- E" r-- ^ CO0O^-<Oo^*(-t0"i|C/)Mo,T<^<O2'0*-(ot-oCouM)^o<n CD O o C O < co : ^52!> LQxU .^*- o Ec Ec Ooo CoM CM CO oo $ cE cE cEcEcEcEcEcE<E=EcEccE cE cE oOoCOtf5O^O`O<eOf,O"OO2Ot--Tt--"<TN-Pi-5-^t-` CgcMCOCOCOCOCOCOCOCOCOCOCOCO O tf) ; oo _ .yajXiOi t _> O *J wCM O r-T-i-Olflr-lOO)C*), oT-- oT" X O^ x 5, o o;^xts; !^ 2oSoI o &eo S 2P . o o o *P- ~ X co rrsrr o oo&ooo sCO a E E E E E ciE gcE Ec= Ec= ^cE= E OorC*-OohC-OtmCtirOCo^rO^CohOoC-TTOo-TJ-oor^>-^io0--To'f^Q--rOo^i--rpo,,a-.oooooooo^^oo E EE EE EE E II E E ccecec:cc:00e ^ ^'"oof^ooWoioloOmo^oo'NooNmoro-uToo-oNo^r---1. c o> 3 5 2 8 2c d<>c ZD o o0 co -- e O"gf*. o <C CD 8o cc cc 76 77 SC 16150 UJVJ025007 CO L A3 pT > Z* f h e U | <s oc _j av>) aos I o CO n -O a> pt r isl:* i e> . xr-5 Ks-->,5.5 : -a c,o<5' _^_ CO *-- T" i > CO ^ c r- CJ CO CSJ C4 CO O CO ^ % V p CO UJ J'S ill fe o oo k_ cr 2? o X O Xo X X rroo s r 2 rH ^co io_ 03 oo W,--, 1 0 0->-(-- 3E X O _O 15 re ^ > 1 I o_ _- o* oI o_ nO oI , . CO E a> --: <5 eeeeeeIII ocoe^=0oc>oc:oc0^c0-o^o-0^o0rEpc c-. u* t"- t*- *-- ooooooooo eeeeeeeeee cccrcccccc ^ OOOOOOUO^OIOOOOOOOOO^--1.. to g'Bl > S =3 . o 0 < CC 78 to > TrDe ................................................ .. " ^ V ^ 0OlOC*>Wr-CM<*JO>r- CM CM CM CM o a> CO < a) at $< = UJ ^ CD O 9- 03 < oi oT o oT oi oi o* oi io -' 79 SC 16151 LAM025002 15 CO * CO >1 -J, J X3n L* -o I-- I CO I 3 *t"o''L/ M- 0> ^ #5 03 E<oucjtr: E C/D CM *-- CO 0UJ USJ' PE & m r* e-anc C3 X WO CO o o o r f rf o oo o E1 sjo|s. i v- oo o Ec Ec oo E * o o: - cm >-- o a > o>C C'D 33EE 80 MICROWAVES These Threshold Limit Values refer to microwave en ergy in the frequency range of 300 MHz to 300 GHz and represent conditions under which it is believed that near ly all workers may be repeatedly exposed without ad verse effect. Under conditions of moderate to severe heat stress, the recommended values may need to be reduced.* Therefore, these values should be used as guides in the control of exposure to microwave energy and should not , be regarded as a fine line between safe and dangerous i levels. Recommended Values: The Threshold Limit Value for occupational exposure to microwave energy, where power density or field in tensity is known and exposure time is controlled, is as follows: 1. For exposure to continuous wave (CW) sources, the power density level shall not exceed 10 milliwatts per square centimeter (mW/cm2) for continuous expo sure, and the total exposure time shall be limited to an 8-hour workday. This power density is approxi mately equivalent to a free-space electric field strength of 200 volts-per-meter rms (V/m) and a free-space magnetic field strength of 0.5 ampere-permeter rms (A/m). 2. Exposures to CW power density levels greater than 10 mW/cm2 are permissible up to a maximum of 25 mW/cm2 based upon an average energy density of 1 milliwatt-hour per square centimeter (mWh/cm2) averaged over any 0.1 hour period. For example, at 25 mW/cm2, the permissible exposure duration is i approximately 2.4 minutes in any 0.1 hour period. | 3. For repetitively pulsed microwave sources, the average field strength or power density is calculated by multiplying the peak-pulse value by the duty cycle. The duty cycle is equal to the pulse duration in sec onds times the pulse repetition rate in Hertz. Expo sure during an 8-hour workday shall not exceed the "Mumford, W.W., "Heat Stress Due to R. F. Radiation," Proceedings of IEEE. Vol. 57. No. 2, Feb. 1969, pp. 171-178. 81 SC 16152 LAM025003 following values which are averaged over any 0.1 hour period: Power Density Energy Density Mean Squared Electric Reid Strength Mean Squared Magnetic Field Strength 10 mW/cm2 1 mWh/cm2 40,000 V2/m2 0.25 A2/m2 4. Exposure is not permissible in CW or repetitively pulsed fields with an average power density in excess of 25 mW/cm2 or approximate equivalent free-space field strengths of 300 V/m or 0.75 A/m. NOISE These threshold limit values refer to sound pressure levels and durations of exposure that represent condi tions under which it Is believed that nearly all workers may be repeatedly exposed without adverse effect on their ability to hear and understand normal speech. The medical profession has defined hearing impairment as an average hearing threshold level in excess of 25 de cibels (ANSI-S3.6-1969) at 500, 1000, and 2000 Hz. and the limits which are given have been established to prevent a hearing loss in excess of this level. The values should be used as guides in the control of noise expo sure and, due to individual susceptibility, should not be regarded as fine lines between safe and dangerous levels. It should be recognized that the application of the TLV for noise will not protect all workers from the ad verse effects of noise exposure. A hearing conservation program with audiometric testing is necessary when workers are exposed to noise at or above the TLV levels. Continuous or Intermittent The sound level shall be determined by a sound level meter, conforming as a minimum to the requirements of the American National Standard Specification for Sound Level Meters, SI .4 (1971) Type S2A, and set to use the A-weighted network with slow meter response. Duration of exposure shall not exceed that shown in Table 7. These values apply to total duration of exposure per working day regardless of whether this is one continu ous exposure or a number of short-term exposures but does not apply to impact or impulsive type of noise. When the daily noise exposure is composed of two or more periods of noise exposure of different levels, 82 their combined effect should be considered, rather than the individual effect of each. If the sum of the following fractions: exceeds unity, then, the mixed exposure should be con sidered to exceed the threshold limit value, Ci indicates the total duration of exposure at a specific noise level, and Ti indicates the total duration of exposure permitted at that level. All on-the-job noise exposures of 80 dBA or greater shall be used in the above calculations. Table 7 Threshold Limit Values Duration per day Hours 16 8 4 2 1 1/2 1/4 1/8 Sound Level dBA'" 80 85 90 95 100 105 110 115* *No exposure to continuous or intermittent in excess of 115 dBA a) Sound level in decibels as measured on a sound level meter, conforming as a minimum to the require ments of the American National Standard Specifica tion for Sound Level Meters, SI.4 (1971) Type S2A, and set to use the A-weighted network with slow meter response. IMPULSIVE OR IMPACT NOISE It is recommended that exposure to impulsive or im pact noise shall not exceed the limits listed in Table 8 or taken from figure 7. No exposures in excess of 140 de cibels peak sound pressure level are permitted. Impul sive or impact noise is considered to be those variations in noise levels that involve maxima at intervals of greater 83 sc 16153 LAM025004 than one per second. Where the intervals are less than one second, it should be considered continuous. Sound Level dB" 140 130 120 Table 8 Threshold Limit Values Impulsive or Impact Noise Permitted Number of Impulses or Impacts per day 100 1000 10,000 `'Decibels peak sound pressure level. Figure 7 -- Threshold Limit Values for Impulse/Impact Noise. 84 SC 16154 85 LAM025005 ULTRAVIOLET RADIATION* These threshold limit values refer to ultraviolet radia tion in the spectral region between 200 and 400 nm and represent conditions under which it is believed that near ly all workers may be repeatedly exposed without ad verse effect. These values for exposure of the eye or the skin apply to ultraviolet radiation from arcs, gas, and vapor discharges, fluorescent, and incandescent sources, and solar radiation, but do not apply to ultravi olet lasers.* These values do not apply to ultraviolet ra diation exposure of photosensitive individuals or of indi viduals concomitantly exposed to photosensitizing agents (Fitzpatrick, et al., eds.. Sunlight and Man, Univ. Tokyo Press, Tokyo, Japan, 1974). These values should be used as guides in the control of exposure to continuous sources where the exposure duration shall not be less than 0.1 sec. These values should be used as guides in the control of exposure to ultraviolet sources and should not be re garded as a fine line between safe and dangerous levels. Recommended Values: The threshold limit value for occupational exposure to ultraviolet radiation incident upon skin or eye where irradiance values are known and exposure time is con trolled are as follows: 1. For the near ultraviolet spectral region (320 to 400 nm) total irradiance incident upon the unprotected skin or eye should not exceed 1 mw/cm2 for periods greater than 103 seconds (approximately 16 minutes) and for exposure times less than 103 seconds should not exceed one J/cm2. 2. For the actinic ultraviolet spectral region (200 -- 315 nm), radiant exposure incident upon the unprotected skin or eye should not exceed the values given in Table 9 within an 8-hour period. 3. To determine the effective irradiance of a broadband source weighted against the peak of the spectral ef fectiveness curve (270 nm), the following weighting formula should be used: Eta = 2 Ex Sx AX "See Laser TLVs. 86 where: Ee* = effective irradiance relative to a monochromat ic source at 270 nm in W/cm2 (J/s/cm2) Ex = spectral irradiance in W/cm2/nm Sx = relative spectral effectiveness (unitless) Ax = band width in nanometers 4. Permissible exposure time in seconds for exposure to actinic ultraviolet radiation incident upon the un protected skin or eye may be computed by dividing 0.003 J/cm2 by Etlf in W/cm2. The exposure time may also be determined using Table 10 which pro vides exposure times corresponding to effective irradiances in #xW/cm2. TABLE 9 Relative Spectral Effectiveness by Wavelength Wavelength (nm) 200 210 220 230 240 250 254 260 270 280 290 300 305 310 315 TLV (mJ/cm2)** 100 40 25 16 10 7.0 6.0 4.6 3.0 3.4 4.7 10 50 200 1000 Relative Spectral Effectiveness Sx 0.03 0.075 0.12 0.19 0.30 0.43 0.5 0.65 1.0 0.88 0.64 0.30 0.06 0.015 0.003 **lmJ/cmJ = lO^J/cm2 87 sc 16155 LAM025006 TABLE 10 Permissible Ultraviolet Exposures Duration of Exposure Per Day Effective Irradiance, E^frW/cmT" 8hrs............................................................ 0.1 4 hrs........................................................... 0.2 2 hrs........................................................... 0.4 1 hr............................................................. 0.8 30 min........................................................ 1.7 15 min........................................................ 3.3 10 min........................................................ 5 5 min.......................................................... 10 1 min.......................................................... 50 30 sec......................................................... 100 10 sec......................................................... 300 1 sec........................................................... 3,000 0.5 sec.......................................................... 6,000 0.1 sec........................................................30,000 All the preceding TLV's for ultraviolet energy apply to sources which subtend an angle less than 80. Sources which subtend a greater angle need to be measured only over an angle of 80. "'IfiW/cm2 = 10"*W/cmJ Figure 8 -- Threshold Limit Values for Ultraviolet Radiation Conditioned (tanned) individuals can tolerate skin ex posure in excess of the TLV without erythemal effects. However, such conditioning may not protect persons against skin cancer. NOTICE OF INTENDED CHANGES (for 1978) These physical agents, with their corresponding val ues, comprise those for which either a limit has been proposed for the first time, or for which a change in the "Adopted" listing has been proposed. In both cases, the proposed limits should be considered trial limits that will remain in the listing for a period of at least one year. If after one year no evidence comes to light that questions the appropriateness of the values herein the values will be reconsidered for the "Adopted" list. 89 Sc 1SlS6 LAM025007 NOTICE OF INTENT TO ESTABLISH THRESHOLO LIMIT VALUES LIGHT AND NEAR-INFRARED RADIATION These Threshold Limit Values refer to visible and near-infrared radiation in the wavelength range of 400 nm to 1400 nm and represent conditions under which it is believed that nearly all workers may be exposed with out adverse effect. These values should be used as guides in the control of exposure to light and should not be regarded as a fine line between safe and dangerous levels. Recommended Values: The Threshold Limit Value for occupational exposure to broad-band light and near-infrared radiation for the eye apply to exposure in any eight-hour workday and require knowledge of the spectral radiance (Lx) and total irradiance (E) of the source as measured at the posi tions) of the eye of the worker. Such detailed spectral data of a white light source is generally only required if the luminance of the source exceeds 1 cd cm*2. At lu minances less than this value the TLV would not be ex ceeded. The TLV's are: 1. To protect against retinal thermal injury, the spectral radiance of the lamp weighted against the function R (Table 11) should not exceed: 1400 H 2 Lk RkAX * 1/at (1)* where U is in W cm-2 sr' and t is the viewing duration (or pulse duration if the lamp is pulsed) lim ited to 1 ixs to 10 s, and a is the angular subtense of the source in radians. If the lamp is oblong, a refers to the longest dimension that can be viewed. For in stance, at a viewing distance r = 100 cm from a tubular lamp of length I = 50 cm, the viewing angle is: a = l/r = 50/100 = 0.5 rad (2) 2. To protect against retinal photochemical injury from chronic blue-light exposure the integrated spectral ra- 90 diance of the lamp weighted against the blue-light hazard function Bx (Table 11) should not exceed: 1400 jL Lx t B* AX 100 Jem*2 sr' (t =s io*s) (3a) 1400 Sj Lx BV AX s io*2 Wcm*2 sr' (t > 10's) (3b) For a source radiance L which exceeds 2 mW cm*2 sr' in the blue spectral region, the permissible ex posure duration L, in seconds is simply: Wr= 100J cm*2 sr'/L (blue) (4) The latter limits are greater than the maximum per missible exposure limits for 440 nm laser radiation (see Laser TLV) because a 2-3 mm pupil is assumed rather than a 7 mm pupil for the Laser TLV. 3. Infrared Radiation: To avoid possible delayed effects upon the lens of the eye (cataractogenesls), the infra red radiation (X > 770 nm) should be limited to 10 mWcm*2. For an infrared heat lamp or any near-in frared source where a strong visual stimulus is ab sent, the near infrared (770-1400 nm) radiance as viewed by the eye should be limited to: 1400 2 Lx AX = 0.6/a 770 (5)* for extended duration viewing conditions. This limit is based upon a 7 mm pupil diameter. `Formulae (1) and (2) are empirical and are not, strictly speaking, di mensionally correct. To make die formulae dimensionally correct, one would have to insert a dimensional correction factor k in the right hand numerator in each formula. For formula (1) this would he k, - t W rad sV4/(cm' sr). and tor formula (5) k, * 1 W rad/(cm' sr). 91 16157 LAM025008 TABLE 11 SPECTRAL WEIGHTING FUNCTIONS FOR ASSESSING RETINAL HAZARDS FROM BROAD -- BAND OPTICAL SOURCES Wavelength (nm) 400 405 410 415 420 425 430 435 440 445 450 455 460 465 470 475 480 485 490 495 500-600 600-700 700-1049 1050-1400 Blue-Light Hazard Function Bi 0.10 0.20 0.40 0.80 0.90 0.95 0.98 1.0 1.0 0.97 0.94 0.90 0.80 0.70 0.62 0.55 0.45 0.40 0.22 0.16 J 0(450-UfOO) 0.001 0.001 0.001 Bum Hazard Function Ri 1.0 2.0 4.0 8.0 9.0 9.5 9.8 10 10 9.7 9.4 9.0 8.0 7.0 6.2 5.5 4.5 4.0 2.2 1.6 1.0 1.0 *j 0(700-M/50SJ 0.2 AIRBORNE UPPER SONIC AND ULTRASONIC ACOUSTIC RADIATION These threshold limit values refer to sound pressure levels that represent conditions under which it is be lieved that nearly all workers may be repeatedly exposed without adverse effect. The values listed in Table 15 should be used as guides in the control of noise expo sure and, due to individual susceptibility, should not be regarded as fine lines between safe and dangerous levels. The levels for the third octave bands centered below 20 kHz are below those which cause subjective effects. Those levels for 1/3 octaves above 20 kHz are for prevention of possible hearing losses from subharmonlcs of these frequencies. TABLE 12 Permissible Ultrasound Exposure Levels Mid-Frequency of Third-Octave Band kHz 10 12.5 16 20 25 31.5 40 50 One-Third Octave -- Band Level in dB reference 0.0002 dynes/cm2 80 80 80 105 110 115 115 115 92 Sc 16158 93 LAM025009 . :*- --.^.'.0-.; I* , .V ^3v.* .U ;^f.^-v ^Slrarffer*f,--' - V -li *42i # t - ** '**' ' f^-Pm < y ..- n! ?t`orPHYSICAL AGENTS UNDER STUDY ^05:-:* These agents comprise Ariose which the Physical Agents Committee of ACGIH proposes to study during this year to determine the feasibility of establishing pro posed TLVs in 1979.'Comments and suggestions, ac-' companied by substantitive evidence.are solicited, r-t/v 1^ad/bi^uOT(y-fl^feffoVr'Spe^cily^3^t'portion auoi&nsb bns etna bo'sfrsi ebnsd evstae MMkRtS WvS!^*. r~ :%!=>v9i 2. Extremely Low frequency (ELf) RadiationSpecifical-j 3^Jy, -that portion of the spectrum from 0 to 300 Hz-sits Z.MagheticRelds? Bdthpuis^Jan"dco'nbnudus7';,;L'10t 4. Laser Radiation. Specifically ultraviolet radiation for < 3 i pulsed exposures, and repetitively eievsj siu;uPu,sed and infrared-^ laser ex- 4^' posures. C7 - .... , ,, . .. to onei.TJfi-fciM 5. J/rasonfc fnergy.Specifically, acoustic energy -at smatewyb SQCo'o ^f^uencies above 10 kHz / ,,...... 6. Vibration. Segmental and whole-body. 7. Cofcf Stress. C8 -v no 8. Pressure Variations. g*, .o ta. . v>. 1 i*, 7uO-r.;-J9 ` '< '.'0--3 , 'JV : ?$&$, v <:-y : 5??; : w.: The American Conference of Governmental Industrial Hy-. w.t*c gienists was organized in 1938 by a group of govem-'`fy'|| mental industrial hygienists who desired a medium for the free exchange of ideas, experiences and the promotion of standards and techniques in industrial health. The ^;>Vr Conference is not an official Government Agency. It is an organization devoted to the development of ad-'jfjf-f ministrative and technical aspects of worker health pro-'!*" tection. The association has contributed substantially to' the development and improvement of official Industrial. health services to industry and labor. The committeesorC Industrial Ventilation and Threshold Limit Values are'rec^a ognized throughout the world for their expertise*andj contributions to Industrial hygieneJ||||.......... ... Membership is limited to professional personnel In govjl emmental agencies or educational Institutlohs'enqagedj in occupational safety and health DroQramsT^e^more| than 1800 members from acrbss^jje^ynited^St^g^y around the world give the organizati^ari^ntemaUonaL scope, i--T .-V- f";V^T. *+St :.'.p...' V -r,, 7 7,> . 7X3?' 94 SC 16159 LAM025010 .>* ^.; ** IRsfCfc' ` is-. - -I S/T - t - 4'>*3 .dTV..t .^'^'/S^aSSsF *$B8flbfrft& v&r >8fSiS> S'iSiitl - +'-r^r;5%v-^'. ,;>;. .i' 'H . - .-_** .- ;,-x : ^ VV-'.V'*- --' `:*S3$fc mas ;!< This information supplied by J'' Industrial Hygiene Sectior '" `S Dept, of Med. & Environ. Health ^fj*.S\ . >v? - : : MoSnst.aLnotouiCs.oMmop.any ' ; ` ESS-; v. sc 16160 . .-*y;x wm,:v **:?v^ r; r LAM025011