Document jy11Zwno34ndO2wQ8VJ91KjyN

DownloadSearchable PDFRandom document
DESCRIPTION: June 19, 1979 Supersedes Formula TEX 978 Dated: April 8, 1979 ACME, TEXAS, PLANT FORMULA READY MIX JOINT COMPOUND TEX-978 White Ready Mix Joint Compound used for taping, topping and texturing. To be. used in 4-gallon cartons and 5-gallon pails. FORMULA: Raw Material Water DuPont JCM Nalco 71D-5 PMA-30 Filler TEX-975 Paragum-146 * Function - Solvent ' Adhesive Defoamer Preservative Filler Thickener RM Spec 185 125 193 Percent 5.544 .096 111 94.008 .241 Lbs/Batch 1120.0 115.0 2.0 2.3 1950.0 5.0 (135) (13 gal Yield: 100.000 3194.3 One batch yields 64+1 four gallon carton or 51+1 five gallon pail at 50 lbs. per carton and 62 lbs. per pail. * Acrysol ASE60 may be used at a loading of 4 lbs/batch (.193%). SPECIAL MIXING INSTRUCTIONS: Blend ingredients in the follow order: 1) Water 2) Adhesive 3) Nalco 4) Preservative 5) Filler 6) Mix as required 7) Paragum-146 8) Mix 2 minutes WORKING CONSISTENCY: Brabender: pH Plant Testing Procedure No. 32. As manufactured - 600 + 20 at 75F. After 3 months - Maximum of 730 at 75F. Minimum - 9.0 Maxmimum -9.5 WORKING PROPERTIES: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. -/ denotes change HCF:ps Continued on Page 2 ----. SGP 0018122 NEW July 2, 1979 Effective: August 1, 1979 AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-978 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material PMA 30 Filler Ak-979 JCM Nalco 71D-5 **Paragum 146 *Water Function Preservative Filler Adhesive Defoamer Thickener Solvent RM Spec 185 125 147 Percent .081 95.106 4.469 .100 .244 Lbs/Batch 3.75 4400.00 206.75 4.60 11.30 2106.25 (23.33 gal) (253 gal) 100.000 6732.65 ** * Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 108 + 2 five-gallon pails Ready Mix Joint Compound at 62 lbs/pail. *** Acrysol ASE-60 may be substituted at a loading of 9.10 lbs/batch (.197%) SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water 2) JCM 3) Nalco 4) Filler AK-979 5) Mix until filler is thoroughly dispersed 6) Add Paragum 146 7) Mix until Ready Mix is smooth - pumping viscosity should be 520 + 20. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender (520+20) For machine tools, add 4 gallons I^O (470+20) PH WORKING PROPERTIES Specifications nc-F: os Minimum- 9.0 Maximum - 9.5 Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . . ---------SGP 0018123 ________ __________ ______________ BONDING PROPERTIES Specifications CRACK RESISTANCE Specifications COLOR Specifications July 2, 1979 Effective: Aug. 1, 1979 Page 2 - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90% fiber tear when delaminated. Refer to P>l- ant Testing Procedure No. 37. Rating shall be 4 or better. White Dried compound shall match color of standard sample. HCF:ps SGP 0018124 December 29, 1969 NEW FORMULA AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound Ak-979. FORMULA Raw Material *Troysan CMP-10-Sep Poly-Vinyl Alcohol " Natrosal Mica Asbestos (SG-210) Limestone Function Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler R.M. Spec. 193 16? 17 1. 1. Percent .10 .80 .50 5.00 1.50 92.10 100.00 Lbs/Batch 4.00 32.00 20.00 200.00 60.00 3684.00 4000.00 WORKING CONSISTENCY: Specifications: - Refer to Plant Testing Procedure.No. 32'. Maximum Minimum Average 53 50 52 WORKING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possesTs fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications re quired of Ready Mix Joint Compound - Formula No. AK-979. EDO:dek SGP 0018125 February 12, 1970 Supersedes Formula AK-97S Dated 12/29/69 AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 /FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound AX-979. / FORMULA Raw Material *Troy>au CMP-10-Sep Poly-'-inyl Alcohol Natro.al Mica Asbestos (SG-210) Limestone Colgan T WORKING CONSISTENCY Specifications: WORKING PROPERTIES Specifications: Functibn R.M. Soec. Percent Lbs/Bat. Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent 193 162 170 11 13 - .10 .SO .50 5.00 2.00 91.10 .50 100.00 4.00 32.00 20.00 200.00 80-.0G 3644.00 20.00 4000.00 - Refer to Plant Testing Procedure No. 32. Maximum Minimum Aversce 53 50 52 Refer to Plant Testing Procedure No. 33. Filler shall be: very heavily bodied and possess fair plasticity. It. shall be free of any coarse. Shitty or undispersed particles. COLCF. Specifications: - White Dried compound shall match color of standard s amp1e. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 bt least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. uDC: den SGP 0018126 March 31, 1970 Supersedes Formula AK-978 Dated 2/-12/70; AKRON. NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound AK-979. / FORMULA Asbestos 7RF09 *Troysan CM!-10-Sep Poly-Vinyl ALcohol Natrosol Mica Asbestos (SG-210) Limestone Colgan T Talc (Glacial 325) WORKING CONSISTENCY Specifications: Function Bulking agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent Slip agent - R.M. Spec. 193 162 .170 11 13 - Percent \' 3.50 .19 .80 . 65 6.CT 1.5 85.20 .25 2.00 100.00 Lbs/Batch 140.00 4.00 32.00 26.00 240.00 60.00 3408.00 10.00 80.00 4000.00 - Refer to Plant Testing Procedure No. 32. Maximum Minimum Ma xiraum WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specific; tions: White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. -/ Denotes change in this reissue. EDO:dek SGP 18i2? May 27, 1970 Supersedes Formula AK-978 Dated 3/31/70 AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT Filler for Ready Mix Joint Compound AK- 979. -/ FORMULA Function R.M.Spec,, Percent Lbs/Batch Asbestos 7RF09 *Troysan CMP-10-Sep Poly Vinyl Alcohol Natrosol Mica Asbestos (SG-210) Limestone Calgon T Talc (Glacial 325) Bulking agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent Slip agent 193 162 170 11 13 - - 3.50 .10 .80 .75 6.00 1.5 85.10 .25 2.00 100.00 140.00 4.00 32.00 30.00 240.00 60.00 3404.00 10.00 80.00 4000.00 WORKING CONSISTENCY: Specifications: Refer to Plant Testing Procedure No. 32 Maximum Minimum Average WORKING PROPERTIES: Specifications: - Refer to Plant Testing Procedure No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: Specifications: - White Dried compound shall match color of standard sample NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979 -/ Denotes change in this reissue. EDO:dek ^ SGP 0018128 September 2, 1970 Supersedes Formula AK-978 Dated 5/27/70 AKRON. NEW YORK. PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") -/ DESCRIPTION OF PRODUCT: - Filler for Ready Mix Joint Compound AK-979 and AK-977 r FORMULA: Function R.M. Spec. Percent Lbs/Batch Asbestos 7RF09 *Troysan CMP-10-Sep Poly Vinyl Alcohol Natrosol Mica Asbestos (SG-210) Limestone Calgon T Talc (Glacial 325) Bulking agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent Slip agent 193 162 170 11 13 " 4.25 .10 .80 .75 7.00 1.75 83.10 .25 2.00 170.00 4.00 32.00 30.00 280.00 70.00 3324.00 10 00 80.00 100.00 4000.00 WORKING CONSISTENCY: Specifications: Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 57 53 55 WORKING PROPERTIES: Specifications: Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: Specifications: White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. -/ Denotes change in this reissue. ED0:elz SGP 0018129 May 24, 1971 Supersedes Formula AK-978 Dated 9/2/70 AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-978, (FILLER "X") . DESCRIPTION OF PRODUCT: - Filler for Ready Mix Joint Compound AX-979 and AK-977. -/ FORMULA: Function R.M. Spec. Percent L> D G. . C - Asbestos 7RF09 *Troysan CMP-10-Sep Poly Vinyl Alcohol Natrosol Mica Asbestos (SG-210) Limestone Calgon T Talc (Glacial 325) Bulking agent Fungicide Adhesive. Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent Slip agent 193 162 170 11 - 13 -. - 4.25 .10 .80 .75 7.CO 1.75 83.85 .25 1.25 ' 170.GO 4.00 32.00 30.00 280.00 70.00 3354.00 10.00 50.00 100.00 4000.00 -/ WORKING CONSISTENCY: Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Aver acre 62 58 60 WORKING PROPERTIES: Specifications: Refer to Plant Testing Procedure No. 23. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: Specifications: White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AX-979. -/ Denotes change in this reissue. ED0:elz SGP 0018130 November 18, 1971 Supersedes Formula AK-978 Dated 5/24/71 AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT: - Filler for Ready Mix Joint Compound AKr979 and '* AK-977. FORMULA - Function R. M.Soec. Percent Lbs/Batch Asbestos 7RF09 *Troysan CMP-10-Sep Pply V'- nyl Alcohol Natrosol Mica Asbestos (SG-210) Limestone Calgon T Bulking Agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent 193 162 170 11 13 - 4.25 .10 .80 .75 7.00 1.75 85.10 .25 100.00 170.00 4.00 32.00 30.00 280.00 70.00 3404.00 10.00 4000.00 WORKING CONSISTENCY Specifications - Refer to .Plant Testing Procedure No. 32 Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: Specifications White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. -/ Denotes change in this reissue. EDO:dek SGP 0018131 April.14, 1972 Supersedes Formula AK-978 Dated H/18/71 AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") / DESCRIPTION OF PRODUCT: FORMULA Asbestos 7RF09 Dowicil 100 Poly Vinyl Alcohol Natrosol Mica Asbestos (SG-210) Limestone Calgon T WORKING CONSISTENCY Specifications - Filler for Ready Mix Joint Compound AK- 979 and AK-977. '' - Function R .M.Soec. Percent Lbs/5atch Bulking Agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent 9 193 162 170 11 13 4.25 .15 .80 .75 7.00 1.75 85.10 .25 100.00 170.00 6.00 32.00 30.00 280.00 70.00 3402.00 10.00 4000.00 Refer to Plant Testing Procedure No; 32. Maximum * Minimum Average 62 58 60 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR; Specifications White Dried compound shall match color of standard sample. NOTE; A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. -/ Denotes change in this reissue. ED0:dek SGp 0018132 June 21, 1973 Supersedes Formula AK-978 >' Dated 4/14/72 AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT: / FORMULA Asbestos 7RF09 Dowicil 100 Poly Vinyl Alcohol *Thickener Mica Asbestos (SG-210) Limestone Calgon T WORKING CONSISTENCY Specifications - Filler for Ready Mix Joint Compound AK- 979 and AK-977. - Function R .M.Spec . Percent Lbs/Ba tch Bulking Agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent 9 4.25 193 .15 162 .80 170 or 223 .75 11 7.00 - 1.75 13 85.05 .25 100.00 170.00 6.00 32.00 30.00 280.00 70.00 3402.00 10.00 4000.00 Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications Refer to PTant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: Specifications White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. -/ * Natrosol 250 HXR or Gendriv 492S -/ Denotes change in this reissue. ED0:elz SGP 0018^ 33 July 12, 1973 Supersedes Formula AJC-978 Dated 6/21/73 AKRON, NEW YORK PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT: FORMULA Asbestos 7RF09. Dowicil 75 Poly Vinyl Alcohol *Thickt ier Mica Asbest js (SG-210) Limest ne Calgon T WORKING CONSISTENCY Specifications - Filler for Ready Mix Joint Compound AK-979 and AK-977. - Function R.M.Spec . Percent Lbs/Batch Bulking Agent Fungicide Adhesive Water Retention aid Anti-Cracking agent Bulking agent Filler Slip agent 9 4.25 193 .20 162 .80 170 or 223 .75 11 7.00 " 1.75 13 85.00 - .25 100.00 170.00 8.00 32.00 30.00 280.00 70.00 .3400.00 10.00 4000.00 Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications COLOR: Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily -bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. -/ * Natrosol 250 HXR or Gendriv 492S -/ Denotes change in this reissue. EDO:elz SGP 0018134 ()c Lo'ie r 17, J `; / Supersedes Formula Dated 7/12/73 l.Y-'nu AKRON, NEW YORK IU,ANT FORMULA KI'.ADY MTX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT: Ashes Los 7KF09 1 roysail 0MP-10-SEP Pole VinyL Alcohol 'Thickener i! i ca Asiu-sl os (St -210) Limestone WO-'.. CONS i stcncy Spec i 1 t ions - Filler for Ready Mix Joint Compound AK-579 u,d AK-977. - Fmic t i on K.M.Spoc. IV < ` Hulking Agent Filing ic ide Ai.'hes ive Water Retention aid Anti-Cracking agent Bulking agent Filler 9 4.23 193 . .10 162 . > in 170 or 223 .7, 11 7. Oo - 1. 7 a 13 00 Ui . . If) ,,. '><) I-f ! /id 100.00 ' 1.00 Refer to Plant Testing Procedure No. 32. Maxi nmm Minimum A'-- 62 58 63 V.'OVR ! \; PROP*. ;TT i'S Sperl lieu ions *'y Stv-c i t i c u t i ons Refer to Plant Testing Procedure No. Filler shall be very heavily boJ i i. J fair plasticity. It shall he free of gritty or undispersed particles. - R'liite Dried compound shall uiatcli color of . . 1; . NQ'i': : \ v.. -Ox o i the tiller shall h. prepas cd according to No, i i .at twice a il.iv or <.* .ill eveoth or 7 th hatch o: il 'i 'is prepared mix sin,11 u.- e:.! ,. ;.nd shall meet all J.r required of Ready Mix Joint Compound - Formula No. AK-d'v. Nutrosol .250 KXI; or Cendriv 492S -/ Denotes change in this reissue. WNGtelz SGP 0018135 March 15, 1974 Supersedes AK-978 Dated 1/15/74 AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-978'(FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready-Mix Joint Compound AK-979 and AK-977. FORMULA Function RM Spec Percent Lbs/Batch Asbestos 7FR09 Troysan PMA-10-SEP Polyvinyl Alcohol Natrosol 250 HXR Mica Asbestos (SG-210) Limestone Calgon T Bulking Agent Fungicide Adhesive Water retention aid Anti-cracking agent Bulking agent Filler Dispersant 9 193 162 170 11 -- 13 229 4.25 .10 .80 .75 9.50 1.25 83.10 .25 170.00 4.00 32.00 30. Of 380.00 50.00 3324.31/ 10.00 100.00 4000.00 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32 Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse. gritty or undispersed particles. COLOR Specifications - White Dried compound shall match color of standard sample NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula No. AK-979. *Cosan JTA-20 may be substituted. Use at a loading of .05% (2 lbs/batch) -/ denotes change VNG:elz SGP 0018136 May 21, 1974 Supersedes AK-978 Dated 3/15/74 AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound AK-979 andt AK-977. FORMULA Function RM Spec Percent Lbs/Batch Asbestos 7FR09 Troysan PMA-10-SEP Gelvatol 3000 Natrosol 250 HXR Mica Asbestos (SG-210) Limestone Calgon T Bulking Agent Fungicide Adhesive Water retention aid Anti-cracking agent Bulking agent Filler Dispersant 9 193 162 170 11 -13 229 4.25 .10 . .40 .75 .. 7.00 1.75 85.50 .25 170.00 4.00 16.00 30.00 280.00 70.00 3420.00 10.00 100.00 4000.00 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. GOLOR Specifications - White Dried compound shall match color of standard sample NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula No. AK-979. *Cosan JTA-20 may be substituted. Use at a loading of .05% (2 Ibs/batch). -/ denotes change WNG:elz SGP 0018137 May 1, 1975 . Supersedes AK-978 Dated k/2\/l\ AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-978 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound A?[-976 and AK-977. FORMULA Asbestos 7FR09 Troysan PMA-10-SEP Gelvatol 3000 Natrosol 250 KXR Mica Asbestos (SG-210) Limestone Function > Bulking Agent F ungicide Adhesive Water retention aid Anti-cracking agent Bulkfng agent Filler RM Spec 9 193 162 170 11 18 13 Percent 4.25 .10 .40 .75 7.00 1.75 85.75 Lbs/hatch 170.00 4. GO 16.00 nr ^ ju.OU 280.00 70.00 qn J t-T J no 100.00 4000.00 WORKING CONSISTENCY Specifications Refer to Plant Testing Procedure No. 32. Maximum Minirftum Average WORKING PROPERTIES Specifications 62 58 60 Prefer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. Specifications White Dried compound shall match color of standard sample NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula No. AK-979. "Cosan JTA-20 may be substituted. Use at a loading of .05% (2 Ibs/bacch). -Asbestos 7HF-02 may be substituted. Use at a loading of 2.755" (110 Ibs/Batch) -/ denotes change AN <jh ocr SGP 0018138 December 22, 1975 Supersedes AK-978 Dated 5/1/75 AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-978 (FILLER X) DESCRIPTION OF PRODUCT-- Filler for Ready Mix Joint Compound AK-976 and AK-977. -/FORMULA Raw Material Function RM Spec Percent Lbs/Batch **Asbestos 7RF09 *Cosan JTA 20 Gelvatol 3000 Natrosol 250 HXR Mica Asbestos (SG-210) Limestone Bulking Agent Fungicide Adhesive Water Retention Aid ' Anti-cracking Agent Bulking Agent Filler 9 193 162 170 11 18 13 4.25 .075 .40 .75 7.00 1.75 85.775 170.00 3.00 16.00 30.00 280.00 70.00 3431.00 100.00 4000.00 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum ; Average 62 58 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula No. AK-979. *Troysan PMA-10-SEP may be substituted. Use at a loading of .15$ (6 lbs/batch). **Asbestos 7RF-02 may be substituted. Use at a loading of 2.75$ (110 lbs/batch). -/ denotes change WNG:j g SGP 0018139 January 27, 1976 Supersedes AK-978 Dated 12/22/75 AKRON, NEW YORK, PUNT FORMUU READY MIX FILLER AK-978 (FILLER X) DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound AK-976 and AK-977. /FORMUU Raw Material Sorbitol (Powdered) ^Asbestos 7RF02 *Cosan JTA 20 Gelvatol 3000 Natrosol 250 HXR Mica Asbestos (SG--210) Limestone Function RM Spec Borax Stabilizer Bulking Agent Fungicide Adhesive Water Retention Aid Anti-cracking Agent Bulking Agent Filler 9 193 162 170 11 IS 13 Percent .10 2.75 .075 .40 .75 7.00 1*75 87.175 Lbs/Batch 4.00 110.00 3.00 16.00 30.00 280.00 70.00 3487.00 100.00 4000.00 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula No. AK-979. *Troysan PMA-10-SEP may be substituted. Use at a loading of .15$ (6 lbs/batch).. -/ **Asbestos 7RF-9 may be substituted. Use at a loading of 4.25% (110 lbs/batch). -/ denotes change WNG: gp SGP 0018140 June 10, 1976 Supersedes AK-973 Dated 1/27/76 AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-973 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound AK-976 and AK-977. -/FORMULA Raw Material Sorbitol (Powdered) **Asbestos 7RF02 *Cosan JTA 20 Hamico 267 Natrosol 250 HXR Mica Asbestos (SG-210) Limestone Function RM Spec Borax Stabilizer Bulking Agent 9, Fungicide 193 Adhesive 3 Water Retention Aid 1 '0 . Anti-eraeking Agent ' 1 Bulking Agent .3 Filler 13 Percent .09 ' .90 .09 .59 .45 7.20 1.39" 33.79 100.00 Lbs/Batch 4.0 40.0 4.0 26.0 20.0 320.0 34.0 3946.0 4444*0 - WORKING CONSISTENCY Specifications Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 53 60 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound -- Formula No. AK-979. *Troysan PMA-10-SEP may be substituted. Use at a loading of .l&tfo (3 lbs/batch). -/ denotes change WNG: gp SGP 0018141 January 10, 1977 Supersedes AK-978 Dated: 6/10/7$ AKRON, NEW YORK, PLANT FORMULA READY MIX FILLER AK-97# (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound AK-976 and AK-977. FORMULA Raw Material / Sorbitol (Powdered) Asbestos 7RF02 *Cosan JTA 20 Kamico 267 Natrosol ?50 HXRMica Asbestos 'SG-210) -/ Limestone Function RM Spec Borax Stabilizer Bulking Agent Fungicide Adhesive Water Retention Aid Anti-cracking Agent Bulking Agent Filler - 9 193 23 170 11 18 13 Percent .07 .90 .09 .59 .45 7.20 1.89 " 88.81 100.00 Lbs/Batch 3.0 40.0 4.0 26.0 20.0 320.0 84.0 394 7.0 4444.0 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 5# 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. AK-979 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. AK-979. *Troysan PMA-10-SEP may be substituted. Use at a loading of .18$ (8 lbs/batch). -/ denotes change WNG: gp SGP 0018142