Document jmmXevJ7V9YJx14zK249Lqxx5

Fluororesin Products for Magnetic flow meters. Lining tank (PTFE), lining piping (PTFE, PFA), lining valve (PTFE, PFA), insertion tube (PTFE, PFA), gasket (PTFE), bellows (PTFE, PFA) Flexible hose (PTFE, PFA), pliable hose (PTFE, PFA) This product is to be used under the following conditions. Subject to use Measuring flow rate of fluid Measurement of exhaust gas and usage of industrial gas or fuel gas. Flow measurement of drinking water, sauces, flammable and explosive fluid and high-temperature water. Existing Industrial equipment and water treatment plant prohibited to cutting pipes. From extremely cold to high-temperature fluid for petrochemical product, organic solvent, inorganic liquid, refrigerant, liquid gas, natural gas and ect. Alcohol and water supply and sewerage system Fluid to be usedUnspecified due to wide variety. Use environmentRT180 Use conditions The mechanism of Magnetic flow meters is creating magnet field in measurement pipes by applying the current for coil first. Then, they measure the flow rate by detecting the magnitude of electromotive current generated according to the flow rate of conductive liquid. The materials are required to be insulation, high-resistance to chemicals and nonadhesiveness for fluid in order to create the magnet field. Thus there is no perfect replacement product at the moment. Reference: Plastic Data Handbook VALQUA Handbook Technical Section, Kogyo Chosakai Publishing Co., Ltd. As mentioned above, the presence of fluororesin product is essential for Magnetic flow meters. We propose a regulatory exemption for the above reasons. Attachment 1: PTFE Safety Date Sheet r FDA IKt~ Printing date 06.02.2023 Safety data sheet Version number I Page 1/6 Revision: 06.02.2023 SECTION1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Trade name: POLYFLON PTFE M-12, 18, 18F, 391S, 392, 393 Article number: M 1.2 Relevant identified uses of the substance or mixture and uses advised against: No further relevant information available. 1.3 Details of the supplier of the safety data sheet Manufacturer/Supplier: DAIKIN INDUSTRIES, LTD. CHEMICALS DIVISION: OSAKA UMEDA TWIN TOWERS SOUTH 1-13-I Umeda, Kita-ku, Osaka-shi, Osaka, 530-0001, Japan Phone: Fax: Further information obtainable from: http://www.daikin.com/ 1.4 Emerrencv telephone number: Japan: China: +86-21-34151689 South Korea: Americas: CHEMTREC (Outside US/Canada: Europe: +49-211-179 225-0 SECTION 2: Hazard identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 The substance is not classified, according to the CLP regulation. 2.2 Label elements Labelling according to Regulation (EC) No 1272/2008: Not applicable Signal word: Not applicable SECTION 3: Composition/information on ingredients Information on ingredients: CAS: 9002-84-0 Polytetrafluoroethylene SECTION 4: First aid measures 100% 4.1 Description offirst aid measures General information: Seek medical treatment. After inhalation: In case of inhaling decomposed gases: supplyfresh air and consult a doctor in case of complaints. After skin contact: Immediately wash with water and soap and rinse thoroughly. After contact with the molten product, cool rapidly with cold water. Do not pull solidified product off the skin. After eye contact: Rinse opened eyefor several minutes under running water. Consult an ophthalmologist in case of complaints. After swallowing: If symptoms persist consult a doctor. 4.2 Most important symptoms and effects, both acute and chronic: Nofurther relevant information available. 4.3 Indication of any immediate medical attention and special treatment needed: No further relevant information available. SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing agents: Usefire extinguishing methods suitablefor surrounding conditions. For safety reasons unsuitable extinguishing agents: Nofurther information available. 5.2 Special hazards arisingfrom the substance or mixture: Formation of toxic gases is possible during heating or in case office. Attachment 2: PFA Safty Date Sheet r DAIKIN Printing date 06.02.2023 Safety data sheet Version number 1 Page 1/6 Revision: 06.02.2023 SECTION I: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Trade name: NEOFLON PFA AP-201, 202, 210, 220, 230, 201SH, 211SH, 215SH,221SH, 230SH, 231SH Article number: AP2 STD 1.2 Relevant identified uses of the substance or mixture and uses advised against: No further relevant information available. 1.3 Details of the supplier of the safety data sheet Manufacturer/Supplier: DAIKIN INDUSTRIES, LTD. CHEMICALS DIVISION: OSAKA UMEDA TWIN TOWERS SOUTH 1-13-1 Umeda, Kita-ku, Osaka-shi, Osaka, 530-0001, Japan Phone: Fax: Further information obtainable from: httpillwww.daikin.com/ 1.4 EmerRencV telephone number: Japan: China: +86-21-34151689 South Korea: Americas: CHEMTREC (Outside US/Canada: +1-703-527-3887) Europe: +49-211-179 225-0 SECTION 2: Hazard identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 The product is not classified, according to the CLP regulation. 2.2 Label elements Labelling according to Regulation (EC) No 1272/2008: Not applicable Signal word: Not applicable SECTION 3: Composition/information on ingredients Information on ingredients: CAS: 26655-00-5 Pmfluoro(alkoxy alkane) Additional information: For the wording of the listed hazard phrases refer to section 16. SECTION 4: First aid measures 100% 4.1 Description offirst aid measures General information: Seek medical treatment. After inhalation: In case of inhaling decomposed gases: supplyfresh air and consult a doctor in case of complaints. After skin contact: Immediately wash with water and soap and rinse thoroughly. After contact with the molten product, cool rapidly with cold water. Do not pull solidified product off the skin. Consult a doctor in case of complaints. After eye contact: Rinse opened eyefor several minutes under running water. Consult an ophthalmologist in case of complaints. After swallowing: If symptoms persist consult a doctor. 4.2 Most important symptoms and effects, both acute and chronic: No further relevant information available. 4.3 Indication of any immediate medical attention and special treatment needed: Nofurther relevant information available. SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing agents: Usefire extinguishing methods suitablefor surrounding conditions. For safety reasons unsuitable extinguishing agents: No further information available. 5.2 Special hazards arisingfrom the substance or mixture: Formation of toxic gases is possible during heating or in case offire. Attachment 3: Chemical resistance of various resins Attachment 4: Heat resistance of various resins Attachment 5: Purity of fluororesin VALQUA Handbook Technical Section