Document jmm969g2rOo8JLoxrNJnJ9v89

DownloadRandom document
zm01 2007 Elastomer(extract) Elastomer Materials List Rubber Materials VALQUA Material Characteristics Symbol and Uses PRODUCTS B0040 Mineral oil B0150 B0250 B0350 Mineral oil Mineral oil, animal and plant Oil Animal and plant oil, water O-Ring Diaphragm General Molded Products (d) Working Temperature Scope (Reference) Hardness Tensile durometer Strength A MPa Stetch % (b) Compression permanent set % Applicable standards -50 - +100 40 14.4 710 27 2) MIL-R6855DCLASS1 -35 - +120 50 13.4 670 17 2) 53 -20 - +120 50 15.8 660 84 2) 8.6 440 25 2) Notice of the Ministry Series Material Code B0680 B0290 B0750 Oil bleeding Various Seals -45 - +120 51 13.8 710 45 3) B0950 B0060 Mineral oil General Molded Products -20 - +120 62 15.1 400 22 2) B0070 B0080 B0160 Mineral oil -30 - +100 60 25.3 560 14 2) B0170 Fuel oil -30 - +120 70 Nitrile Rubber (NBR) B0570 Mineral oil B1370 B2070 For low temperatures Highly fragrant gasoline O-Ring -35 - +120 70 -50 - +120 70 70 B2270 For Vacuums -20 - +120 73 Abrasion B2670 resistance for Oilless packing 72 pneumatics TOUGHRILE B2770 For high temperature oils O-Ring -40 - +135 70 B0675 Heat resistance, friction O-Ring, 78 resistance Various Seals B0180 Mineral Oil For pneumatics O-Ring, Mini U-Packing -20 - +120 83 U-Packing, B0780 For pneumatics dust seal 82 Cushion Packing B0390 Hydraulics O-Ring U-Packing, Dust Seal V-Packing -35 - +120 88 B0490 For low temperatures O-Ring, U-Packing V-Packing -50 - +100 88 Lubricating rubber Super Rubber (HNBR) B5075 B5070 B5680 B5290 Lubricated, non-adhesive Heat resistance, friction resistance CFC resistance R134a) Hot water resistance, friction resistance O-Ring, Various Seals O-Ring, Various Seals O-Ring, Various Seals -25 - +150 75 -30 - +150 73 -25 - +150 81 -30 - +150 91 B5490 For white -35 - +150 88 16.9 340 10 2) JIS B2401 Class 2 JIS B24011 Class A 16.5 320 20 3) Notice of the Ministry of Health and Welfare No. 201 (a) 14.5 190 9 2) 14.5 370 13 2) 18.1 370 15 2) 18.0 270 12 2) 17.0 310 15 3) B0880 B0385 B0690 19.8 220 9 2) 21.0 240 14 2) 20.2 200 16 2) JIS B24011 Class B JIS B2403 19.2 160 16 3) Notice of the Ministry of Health and Welfare No. 201 (a) 15.6 150 21 3) MIL-P-5510B Notice of the Ministry of 19.0 290 15 3) Health and Welfare No. 201 (a) JIS K6353 Notice of the Ministry of 30.3 300 10 3) Health and Welfare No. 201 (a) 22.8 220 11 3) B5060 B5080 B5485 26.2 150 13 3) Notice of the Ministry of Health and 27.1 290 28 4) Welfare No. 201 (a) B5160 B5170 B5180 Note) (a) Please provide instructions indicating if an order is for an intended food product use. (b) Conditions of compression permanent set tests are as follows. 1) 70C - 22 h, 2) 100C - 70 h, 3) 120C - 70 h, 4) 150C - 70 h, 5) 150C - 22 h, 6) 175C - 22 h, 7) 175C - 70 h, 8) 80C - 70 h, 9) 204C - 70 h 17 : Critical Specification : Products containing PFAS Rubber Materials VALQUA Material Characteristics Symbol and Uses PRODUCTS D0070 D2270 D0270 D2470 D2570 D2670 Heat resistance, oil resistance, chemical resistance Electrical conductivity, high strength Low compression permanent set For vacuums Gasket Diaphragm O-Ring, belt Acid resistance For high temperatures Low compression permanent set Solvent resistance (d) Working Temperature Scope (Reference) Hardness Tensile durometer Strength A MPa Stetch % (b) Compression permanent set % Applicable standards -15 - +200 72 14.6 370 22 6) Series Material Code D0060 D0080 -10 - +200 71 -15 - +200 72 -20 - +200 70 29.4 420 13 6) 13.9 260 JIS B2401 Class 4 D 4 6) Notice of the Ministry of Health and Welfare D0260 D0280 D0290 No. 201 (a) 18.7 430 30 7) -15 - +230 72 13.6 230 3.8 6) -50 - +200 73 7.8 220 7 7) Fluoro Rubber (FKM) D2770 D0970 General-Use O-Ring Alkali resistance D1270 Solvent-resistance D9070 D0675 D0875 D0390 D0890 Color (Brown) Steam resistance Low compression permanent set For low temperatures Low compression permanent set High strength Various Seals Steam resistance Perfluoroelastomer (FFKM) D9270 D9160 FLUORITZTM-SB FLUORITZTM-TR FLUORITZTM-HS Anti-staining properties (white) For transparent, non-polluting semiconductors Highly superior chemical resistance Highly superior crack resistance Highly Superior Heat Resistance O-Ring -15 - +200 73 0 - +200 70 -15 - +200 70 -15 - +200 71 14.1 250 13 6) Notice of the Ministry 17.6 270 23 6) of Health and Welfare No. 201 (a) JIS B2401 15.3 320 18 7) Class 4 D Equivalent 13.1 220 4 6) 0 - +200 75 18.6 160 15 6) D0880 -30 - +200 78 18.6 190 - D1490 -15 - +200 90 17.6 170 14 6) D0360 D0370 D0380 0 - +200 89 -10 - +200 72 -10 - +150 61 18.0 260 32 6) Notice of the Ministry 15.0 270 16 6) of Health and Welfare No. 201 (a) 13.6 500 36 5) 0 - +200 77 17.9 160 - 0 - +260 72 11.1 160 - 0 - +300 77 20.0 160 - R0090 Heat resistance Various Seals -30 - +100 87 32.8 310 17 2) R0060 R0070 R0080 R0490 High performance TOUGHRETHANE P Long-Lasting Seal -20 - +80 93 43.0 360 28 8) R0595 (C) TOUGHRETHANETM (AU, EU) R5190 R5390 R5590 R5795 R6195 R6395 General-Use Ball, Coupling -25 - +80 90 Water resistance Various Seals, Films 90 -30 - +80 Oil resistance Hydraulic Packing 90 Transparency Printing sheets 95 Hydrolysis TOUGHRETHANE -20 - +80 resistance New Series 94 Hydraulic Packing Low compression Various Seals General Molded -30 - +100 95 permanent set Products 44.0 550 40 1) 39.2 500 35 1) 44.0 500 40 8) 44.0 450 40 1) 51.0 400 28 8) 39.2 540 23 8) R5180 R5185 R5195 R5198 R5380 R5385 R5395 R5585 R5595 R5598 R6190 R6390 Note) (c) TOUGHRETHANETM, a trademark of VALQUA, is a urethane rubber product produced and sold by VALQUA.(d) The working temperature scope will change based on usage conditions and demanded capabilities, such as the nature of flowing materials and pressure involved. Please contact us for details. Note) The physical characteristics values are all examples of measured values at room temperature, and are not standard values. 18 : Critical Specification : Products containing PFAS Rubber Materials VALQUA Material Characteristics Symbol and Uses PRODUCTS E0035 Oil bleeding Various Seals (d) Working Temperature Scope (Reference) Hardness Tensile durometer Strength A MPa Stetch % (b) Compression permanent set % Applicable standards -60 - -200 34 8.3 530 8 5) Series Material Code E1750 E2250 E0250 For extrusion O-Ring 53 9.0 300 32 6) AMS3302B E0750 Heat resistance Flector 53 8.4 360 44 6) Silicone Rubber (VMQ) E1150 E1760 E1170 High strength, General Molded nuclear power use Products Heat resistance General Molded Products Steam resistance General Molded Products 53 60 -60 - +200 66 E0170 Heat resistance, cold resistance 72 O-Ring E0870 Color (White) 70 Notice of the Ministry of 8.5 600 18 6) Health and Welfare No. 201 (a) 7.6 280 12 6) 8.8 390 14 6) JIS B2401 Class4 C Notice of the Ministry of 6.0 190 27 6) Health and Welfare No. 201 (a) AMS3304F 6.2 180 19 6) Fluorosilicone Rubber (FVMQ) Ethylene propylene Rubber (EPDM) Chloroprene rubber (CR) Butyl rubber (IIR) Acrylic Rubber (ACM) Natural Rubber (NR) Styrene rubber (SBR) E0470 H0470 H0870 H0970 H0765 H0880 J0170 F0075 L1270 L0970 K0170 A0170 Heat resistance, cold resistance, O-Ring oil resistance For foods Steam resistance, chemical resistance For brake fluid Steam resistance, chemical resistance For brake fluid Various Seals O-Ring White Hot water resistance, steam resistance O-Ring, Various Seals CFC resistance O-Ring For tap water use Heat resistance, oil-resistance Heat resistance, oil-resistance Elasticity For brake fluid O-Ring O-Ring O-Ring General Molded Products O-Ring General Molded Products -60 - +200 73 -50 - +150 73 -35 - +150 70 -50 - +150 70 -35 - +150 67 -50 - +150 80 -30 - +120 68 -20 - +150 74 -20 - +150 73 -30 - +150 68 -40 - + 90 70 -40 - +120 71 7.6 280 12 6) MIL-R-25988B Notice of the Ministry of 16.4 270 23 5) Health and Welfare No. 201 (a) Notice of the Ministry of 17.1 320 26 5) Health and Welfare No. 201 (a) 16.1 300 15 5) JIS B2401 Class 3 Equivalent Notice of the Ministry of 11.3 260 10 4) Health and Welfare No. 201 (b) Notice of the Ministry of 19.6 160 10 4) Health and Welfare No. 201 (b) H0180 H0190 H0560 H0185 H3070 19.4 340 20 2) J0150 J0160 J0180 12.3 170 4 2) JWWA G116 Class 1 Equivalent F0160 F0170 F0180 11.1 190 13 4) 11.8 190 26 4) 18.8 450 15 1) K0060 K0180 14.9 400 16 2) JIS B2401 Class 3 Note) (a) Please provide instructions indicating if an order is for an intended food product use.(b) Conditions of compression permanent set tests are as follows. 1) 70C - 22 h, 2) 100C - 70 h, 3) 120C - 70 h, 4) 150C - 70 h, 5) 150C - 22 h, 6) 175C - 22 h, 7) 175C - 70 h, 8) 80C - 70 h, 9) 204C - 70 h(c) TOUGHRETHANETM, a trademark of VALQUA, is a urethane rubber product produced and sold by VALQUA.(d) The working temperature scope will change based on usage conditions and demanded capabilities, such as the nature of flowing materials and pressure involved. Please contact us for details. Note) The physical characteristics values are all examples of measured values at room temperature, and are not standard values. MEMO 19 Types and characteristics of pneumatic packing Sealants used in pneumatic equipment are expected to be compact, have high sealing performance, economical, and with low sliding friction so as to allow operation even in lowpressure environments. As a result, materials selection, optimized form design, and a high degree of dimensional accuracy all corresponding to the intended use are necessary. One-Ring Packing TOUGHRILETM Cushion Packing For Pistons One-Ring packing U-Packing Small diameter One-Ring packing Use Name Cross-Sectional Shape Series PSP PWP UPP PUD UPR Characteristics This product is small-diameter piston packing for dualpressure type 1-Rings, and can be applied to uncut tubes with rough dimensional accuracy and surface smoothness. This product is small-diameter piston packing for dualpressure type 1-Rings, with limited installation space and reduced sliding friction. Material Super Rubber Nitrile Rubber Fluoro Rubber Abrasion-resistant Nitrile Rubber TOUGHRILETM Super Rubber VALQUA Product Number 2060 4060 2060 This product is asymmetrical packing for large crosssections, and can be used for general-use pneumatic cylinders. Nitrile Rubber 2060 This product is an oilless rod packing with a duster lip, with limited installation space. Abrasion-resistant Nitrile Rubber TOUGHRILETM Super Rubber 2060 This product is asymmetrical packing for large crosssections, and can be used for general-use pneumatic cylinders. Nitrile Rubber 2060 U-Packing For rods CPC Cushion packing for use in general-use pneumatic cylinders. Nitrile Rubber 2060 CPF A floating-type cushion packing that smoothes out the operation of pneumatic cylinders. Abrasion-resistant Nitrile Rubber TOUGHRILETM 2060 Cushion Packing Dust Seal DPS A dust seal for use in general-use pneumatic cylinders. Nitrile Rubber 2060 DHS This product should be used for large diameter pneumatic cylinders (rod diameter 50 or greater) and general-use industrial equipment. Nitrile Rubber Fluoro Rubber 2060 4060 TOUGHRILETM, a trademark of VALQUA, is an oilless packing made by VALQUA. As TOUGHRILETM is a strategic material (or investment) as defined by the Foreign Exchange and Foreign Trade Act, any export will require export approval in accordance with the Act. 3 VALQUA O-Ring Our company, since our founding in 1927, started off producing synthetic rubber V-Packing which led us to be one of the first to begin production on O-Rings, with VALQUA actually being the first company in Japan to receive JIS approval for JIS-standard O-Rings. In 1964, we received Defense Agency certification for airplane-use O-Rings MIL-P-5516B Class B AN6227 and AN6230 hydraulics O-Rings, and began production of MIL-standard airplane-use O-Rings. Even now, with our airplane-use packing still leading our product lineup, we continue making products under stringent product quality management for a variety of industries, such as general-use industrial products, nuclear power-related products, and semiconductor manufacturing-related products. BY MATERIALS Standard Type For General-use For Fuel Use For Animal and Plant Oils For Heat Resistance For Heat Resistance and Oil Resistance For Coolants For general equipment JIS B2401 VALQUA SG standards Class 1 A Class 1 B Nitrile Rubber (NBR) Class2 Class3 Class 4 C Nitrile Rubber (NBR) Fluoro Rubber (FKM) Fluorosilicone Rubber (FVMQ) Ethylene Propylene Rubber (EPDM) Styrene Butadiene Rubber (SBR) Silicone Rubber (VMQ) Class 4 D Fluoro Rubber (FKM) Acrylic rubber (ACM) - - P (moving part) G (fixed part) V (vacuums) ISO (general industrial) For fixed part For automobile JASO F404 Class 1 A Class 2 Class 3 Class 4 C Class 4 D Class 4 E Class 5 For moving part For fixed part For aircraft AS568A Nitrile Rubber (NBR) Nitrile Rubber (NBR) Fluoro Rubber (FKM) Fluorosilicone Rubber (FVMQ) Ethylene Propylene Rubber (EPDM) Styrene Butadiene Rubber (SBR) Silicone Rubber (VMQ) Fluoro Rubber (FKM) - For moving part For fixed part Note) The VALQUA SG Series is the series version of O-Rings with particularly thin wire diameters in order to meet our customer's requests for miniaturization of equipment. By Use Large-diameter O-Rings (inner diameter dimensions of 300 or more) can be made in the customer's desired dimensions with no limitations on maximum diameter dimensions through specialized vulcanization molding. Note that there are no differences in performance or quality when compared with products made through vulcanization molding using general-use presses. Color O-Ring This product series takes the traditionally black O-Rings and differentiates their component rubber materials by color. This will make identifying O-Ring materials easier, preventing installation errors and other mistakes. Furthermore, the white-colored product is frequently used as sealant for semiconductor equipment due to its efficacy at managing problems with contamination. Rubber Materials VALQUA Material Symbol Color Tone Application Silicone Rubber (VMQ) E0170 E0870 Reddish Brown JIS B 2401 Class 4C Equivalent White JIS B 2401 Class 4C Equivalent Fluoro Rubber (FKM) D9070 D9270 Brown White JIS B 2401 Class 4D Equivalent JIS B 2401 Class 4C Equivalent Note) We accept requests for materials other than those described above (such as acrylic rubber). NEW RUBBERFLONTM O-Ring When conducting continuous automatic installation of rubber products, the production line can see stoppages due to products becoming twisted during installation caused by strong resistance, and adhesion between products. The NEW RUBBERFLONTM O-Ring has had its surface modified in order to eliminate such defects. This product reacts with nearly all elastomers, like nitrile, fluoro rubber, and acrylic rubber, and forms a tightly bonded film. This film retains high followability even after being extended, leaving it unlikely to separate after installation, and is typically used in stationary seals (gaskets). Uses: 1. Continuous Automated Installation Lines, 2. Component Supply Lines, 3. Oil and Grease, 4. Equipment Seal Anchoring Prevention Dynamic Dynamic Friction Coefficient 3 2.5 2.25 2.6 Unprocessed New 2.69 RUBBERFLONTM 2.12 2 1.75 1.56 1.42 1.5 1.23 1 0.5 0.13 0.12 0.24 0.13 0.21 0.1 0.16 0.1 0 SBR NBR FKM IIR EPDM CR ACM U Sample : 100X150X2t Ball Indenter : SUS, 6 Load : 200gf Speed : 60mm/min Note) NEW RUBBERFLONTM is not a surface quality modification of fluorine based products. 4