Document jgm57JQXZk58GjX2QXxq3rBqk

GAS SEPARATION PLANT CT t % DESIGN REPORT EXPANSION TO 5, $35 M.C.F.D, CONTAINED ETHYLENE AND 700 M.C.F.D. CONTAINED PROPYLENE PRODUCTION RG3, GAS CRAOKINa FURNACES COOLING AND SCRUBBING SYSTEM DRIPOLENE REMOVAL SYSTEM GAS PROCESS DEVELOPMENT DEPARTMENT CARBIDE AND CARBON CHEMICALS CORPCRATION SOUTH CHARLESTON. WEST VIRGINIA DECEMBER 15, 1943 PLAINTIFF'S - EXHIBIT 1 *TOi4,Q(L UCASB02113220 WV-17818 # ' 4- - Motor to be 440 volt, 60 cycle, 3-phase, explosion proof type. Underwriters approved for Class 1, Group D service, and conforming to the general ''Specifications for Electric Motors for the CT Plant". This pump and motor unit will be a duplicate of Item RG-liji, 17P-23> Plant CT, purchased on Carbide and Carbon Cheioicals Corporation's Purchase Contract No. 82198. RG3-I08 - COOLING TO SR. To cool the water in the furnace cooling water cycle. This shall be a Marley "Standard Induced Draft" Cooling Tower of three cells, capable of cooling 1000 G.P.M. of water from l65F. to 80F. at 75F. wet bulb atmospheric conditions. This tower is to be a duplicate of the Cooling Tower, Item RG-149, 'fP-23, Plant CT, purchased from the Parley Company on Carbide and Carbon Chemicals Corporation1s Purchase Contract No. 81807* The specifications as to material, design, and construction shall be identical with the specifications for these items for Item RG-149, but shall include any changes or additions made in Item RG-149 during erection. The tower shall be subject to the same guarantees of material and construction as Item RG-149. RG3-109 - FLUE (NOT 5H0LN ON FLOL SHEET). To conduct hot combustion gases from the individual furnace breechings to the central stack, I This will be an extension of the existing furnace building flue. It includes six uptsices, It shall be constructed in accordance with Drawing R-103714, said the following specifications. Steel Plate. 3/16" minimum thickness mild steel plate. Insulation. Internal insulation consisting of A--l/2" minimum thickness of .Johns-Manvi11e #20, or equivalent, insulating brick. Surface to be covered with a brush coat of refractory cement. The flue uptakes shall be insulated on the outside n/ith a 1-1/2" thick layer of Johns-Fanville Super-X Insulating Block and a l-l/2" thick layer of Magnesia covered with a reinforced surface of hard finish insulating cement, Find Loading. The main breeching shall be reinforced and anchored to resist a vrind loading of 40 lb./sq.ft. UCASB02113225