Document jgexzXZMq28gDD2KQQz94DEyN

2007 Taurus Workshop Manual Page 2 of3 Loosen the brake shoe adjusting screw nut. 1. Using a screwdriver, move the brake shoe adjusting lever off the brake adjuster screw. 2. NOTE: Move the adjustment tool handle downward to loosen the brake shoe adjusting screw nut. Using a suitable tool, loosen the brake shoe adjusting screw nut. 4. Using the special tool, measure the brake drum inside diameter. Install a new brake drum if the maximum inside diameter exceeds the specification molded into the brake drum. 5. NOTE: If adjusting the rear brakes, refer to Brake Shoe Adjustment -- Drums Removed in this section. To install, reverse the removal procedure. http://www.motorcraftservice.com/pubs/content/~WS7H/~MUS~LEN/19/S7H62007.HTM 7/17/2006