Document jgdgxRznN8roEwg750Ke5bjB9

DownloadSearchable PDFRandom document
March 30, 1S78 Supersedes Formula M-975 Dated: 9/17/77 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Proxel CRL /Filler M-976 /Eivace EP-200 /Nalco 71D-5 /Acrysol ASE-60 'Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .047 93.886 5.778 .096 .193 .98 1950.02 120.0 (13.48 gals.) 2.0 4.0 1120.0 (134.9' gals.) 100.000 3197.0* `^Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 51+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - - Blend ingredients in following order: 1) Water/Proxel 2) Elvace 3) Nalco 4) Filler M-976 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity should be 480+20 to allow for 24 hour viscosity build oflOOpts. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If past is not proper working consistency, a miximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons 1^0 (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty of undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . . WNG:j r -/ denotes change GP-484 SGP 0017872 superseaei- ... p rmuj-o H-S/p Dated: 3/30/78 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Proxel CRL -/Filler M- 973 /Dupont JCM -/Nalco 71D-5 -/Acrysol ASE-60 *Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .047 94.113 5.550 .097 .193 .98 1950.02 115 .0 (12.9 gals .) 2.0 4.0 1120.0 (134.9 gals.) 100.000 3192.0* '''Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **0ne batch yields 51+1 five gallon pail Ready Mix joint compound at 62 los/pail. SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water/Proxel 2)- JCM 3) Nalco 4) Filler M-973 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity should be 480+20 to allow for 24 hour viscosity build of 100 pcs. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If past is not proper working consistency, a miximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons ^0 (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty of undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . . WNG:j r -/ denotes change SGP 0017873 OctODer 5, 1978 Supersedes Formula M-975 Dated: 6/31/78 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch -/ PMA 30 Filler M-973 DuPont JCM 'Nalco 71D-5 Acrysol ASE-60 *Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .077 94.086 5.548 .096 .193 100.000 1.6 1950.4 115.0 ( 12.9 2.0 4.0 1120.0 (134.9 3193.0** '^Approximately 52 lbs/100 lbs. of active ingredients (this may vary +8 gallons per batch. -/ **One batch yields 50+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/Proxel 2) JCM 3) Nalco 4) Filler M-973 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 -/7) Mix until Ready Mix is smooth - pumping viscosity should be 620+20. WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper work ng consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. -/ Brabender: (620F20) For Machine tools add 7 gal Lons 1^0 (400 + 20) -/pH 8.0 - 9.0 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. GWG: jr Continued on Page 2 . . . -/ denotes change SGP 0017874 April 13, 1981 FORMULA M-975 NEW MARIETTA, GEORGIA, PLANT FORMULA READY MIX FILLER M-975 "MID-ATLANTIC" FORMULA DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound M-976 and Topping Compound M-977. FORMULA Raw Material Pyrophylite-SK Limestone Methocel 240 Starch C-9-136 Function RM Spec Bulking Agent Filler Water Retention Adhesive 13 163 10 Percent Lbs/Batch 10.8 87.94 .360 .900 600.0 4885.0 20.0 50.0 100.000 5555.0 WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Maximum 62 Minimum 58 Average 60 WORKING PROPERTIES Specific ations Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specificiations White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula M-976 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. M-976. BGR:ps f SGP 0017875 June 30, 1981 Supersedes Formula M-975 dated 4/13/81 MARIETTA, GEORGIA, PLANT FORMULA READY MIX FILLER M-975 "MID-ATLANTIC" FORMULA DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound M-976 and Topping Compound M-977. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Pyrophylite-SK Limestone Methocel 240 Starch C-9-136 -/ Tektamer 38 Bulking Agent Filler Water Retention Adhesive Preservative 1 13 163 10 128 10.8 87.866 .360 .900 .074 100.000 600.0 4880.9 20.0 50.0 4.1 5555.0 WORKING CONSISTENCY - Refer to Plant Testing Procedure' No. 32. Maximum 62 Minimum 58 Average 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily be died and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specificiations - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula M-976 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. M-976. BGR:ps -/ denotes change SGP 0017876 October 2, 1981 f Supersedes Formula M-975 dated 6/39/81 MARIETTA, GEORGIA, PLANT FORMULA READY MIX FILLER M-975 "MID-ATLANTIC" FORMULA DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound M-976 and Topping Compound M-977. FORMULA Raw Material Pyrophylite-SK Limestone Methocel 240 Starch C-9-136 Function RM Spec Bulking Agent Filler Water Retention Adhesive 1 13 163 10 Percent 10.8 87.94 .36 .90 Lbs/Batch 600.0 4885.0 20.0 50.0 100.00 5555.0 WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Maximum 62 Minimum 58 Average 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specificiations - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula M-976 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. M-976. BGR:ps -/ denotes change SGP 0017877 April 27, 1976 Formula M-975 NEW MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White.Ready Mix Joint Compound used for taping, topping and texturing. (Special asbestos free formula for selective shipment only.) FORMULA Raw Material Function RM Spec Percent Lbs/Batch Filler M-976 Elvace 1975 Nalco 71D-5 Acrysol ASE-60 *Water Filler Adhesive Defoamer Thickener Solvent __ IS 5 125 147 -- 92.3 6.5 .2 .5 -- lOOVO 1950.0 136.0 (15.25 gals. 4.0 10.0 1120.0 (135 gals.) 3220.0** ^Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 3 gallons per batch. **0ne batch yields 51 1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS -Blend ingredients in'following order: 1)Water 2 )Elvace 1375 3)Nalco 4)Filler M-976 5)Mix until filler is dispersed 6)Add Acrysol ASE-60 7)Mix until Ready Mix is smooth - pumping viscosity should be 430 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (530 20) For Machine tools add 7 gallons H2O (400 1 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. WNG:jg Continued on Page 2... ... -H*, . U4W m.g W)i *IMi __ 1 SGP 0017878 April 27, 1976 Formula M-975 Page 2 NEW BONDING PROPERTIES Specifications CRACK RESISTANCE Specifications COLOR Specifications - Refer to Plant Testing Procedure No. 3 5. After compound has dried, tape shall show at least 90$ fiber tear when delaminated. - Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better. - White Dried compound shall match color of standard sample. WNG:jg SGP 0017879 January 13, 1977 Supersedes Formula M-975 Dated: 4/27/76 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Asbestos free formula supplied in-all one gallon shipments and on special request.) FORMULA Raw Material Filler M-976 Elvace EP-200 Nalco 71D-5 Acrysol ASE-60 -/*Water Function Filler Adhesive Defoamer Thickener Solvent RM Spec .185 125 147 Percent Lbs/Batch 92.8 6.5 .2 .5 1950.0 136.0 (15.25 gals.) 4.0 10.0 1195.0 (144 gals.) 100.0 3295.0** *Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 53+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water 2) Elvace 3) Nalco 4) Filler M-976 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity should be 480 + 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons 1^0 (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery.working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 WNG/gvp - > ' .r; - SGP 0017880 supersedes lonnuia M-a,j Dated: 1/13/77 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUN M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Proxel CRL Filler M-976 Elvace EP-200 Nalco 71D-5 Acrysol ASE-60 *Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .047 93.169 6.498 .095 .191 .98 1950.02 136.0 (15.25 gals.) 2.0 4.0 1104.0 (133 gals.) 100.000 3197.0* ^Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 51+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water/Proxel 2) Acrysol 3) Elvace 4) Nalco 5) Filler M-976 6) Mix until Ready Mix is smooth - pumping viscosity should be 480 + 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If past is not proper working consistency, a miximura of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons ^0 (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty of undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . . WNG:jr -/ denotes change SGP 0017881 ouperseoL ci.. Dated: 7/15/77 u-97j MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Proxel CRL Filler M-976 Eivace EP-200 Nalco 71D-5 Acrysol ASE-60 *Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .047 93.169 6.498 .095 .191 .98 1950.02 136.0 (15.25 gals 2.0 4.0 1104.0 (133 gals.) 100.000 3197.0* 'Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 51+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water/Proxel 2) - Elvace 3) Nalco 4) Filler M-976 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity shoul be 480+20 to allow for 24 hour viscosity build of lOOpts WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If past is not proper working consistency, a miximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons H^O (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty of undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . . WNG:jr -/ denotes change SGP 0017882 MARIETTA FORMULA # 975 ASBESOS CONTAINING PRODUCTS SGP 0017883 April 27, 1976 Formula M-975 NEW MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUlfo M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White,Ready Mix Joint Compound used for taping, topping and texturing. (Special asbestos free formula for selective shipment only.) FORMULA Raw Materiax Function RM Spe c Percent Lbs/Batch Filler M-976 Elvace 1975 Nalco 71DAcrysol ASL-60 *Water Filler Adhesive Defoamer Thickener Solvent 135 125 147 -- 92.3 6.5 .2 .5 -- 1O0.O 1950.0 136.0 (15.25 gals 4.0 10.0 1120.0 (135 gals.) Ti2D7** ^Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 0 gallons per batch. **One batch yields 51 - 1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS --Blend ingredients in following order: 1)Water 2)Elvace 1875 3)Nalco 4{Filler M-976 5)Mix until filler is dispersed 6)Add Acrysol ASE-60 7)Mix until Ready Mix is smooth - pumping viscosity should be 480 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (530 + 20) For Machine tools add 7 gallons H2O (400 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. WNG:jg Continued on Page 2... ... SGP 0017884 April 27, 1976 Formula M-975 Page 2 NEW BONDING ^ PRO PERTIES Specifications CRACK RESISTANCE Specifications COLOR Specifications, - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated. - Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better. - White Dried compound shall match color of standard sample. WNG:jg SGP 0017885 January 13, 1977 Supersedes Formula M-975 Dated: 4/27/76 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Asbestos free formula supplied in all one gallon shipments and on special request.) FORMULA Raw Material Filler M-976 Elvace EP-200 Nalco 71D-5 Acrysol ASE-60 Water Function Filler Adhesive Defoamer Thickener Solvent RM Spec _- 185 125 147 -- Percent Lbs/Batch 92.8 6.5 .2 .5 -- 1950.0 136.0 4.0 10.0 1195.0 (15.25 gals.) (1+4 gals.) 100.0 3295.0** *Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 53+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - - Blend ingredients in following order: 1) Water 2) Elvace 3) Nalco 4) Filler M-976 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity should be 480 + 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons H2O (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES . Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery.working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 WNG/gvp ! 1.. SGP 0017886 oupersedes i onnuia Dated: 1/13/77 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUN M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Proxel CRL Filler M-976 Elvace EP-200 Nalco 71D-5 Acrysol ASE-60 *Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .047 93.169 6.498 .095 .191 .98 1950.02 136.0 (15.25 gals.) 2.0 4.0 1104.0 (133 gals.) 100.000 3197.0* ^Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 51+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/Proxel 2) Acrysol 3) Elvace 4) Nalco 5) Filler M-976 6) Mix until Ready Mix is smooth - pumping viscosity should be 480 + 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If past is not proper working consistency, a miximura of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons 1^0 (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty of undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . . WNG:jr -/ denotes change SGP 0017887 uU.pL'SetiU'- : l< Dated: 7/15/77 Li-9/j MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-975 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Function RM Spec Percent Lbs/Batch / Proxel CRL Filler M-976 Eivace EP-200 Nalco 71D-5 Acrysol ASE-60 *Water Preservative Filler Adhesive Defoamer Thickener Solvent 185 125 147 .047 93.169 6.498 .095 .191 .98 1950.02 136.0 (15.25 gals 2.0 4.0 1104.0 (133 gals.) 100.000 3197.0* *Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. **One batch yields 51+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/Proxel 2)- Elvace 3) Nalco 4) Filler M-976 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity shouL be 480+20 to allow for 24 hour viscosity build oflOOpts WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If past is not proper working consistency, a miximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons ^0 (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty of undispersed particles. Material shall be free from lumps due to incomplete mixing. WNG:jr -/ denotes change Continued on Page 2 . . . SGP 0017888 SGP 0017871