Document jg5r033Jvr4M90o4Dx5yyyEDy
PLAINTIFF'S EXHIBIT
February 25, 1966 NEW FORMULA Paoli LaborsCory
ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-975 (HAND
DESCRIPTION OF PRODUCT - White Ready Mixed Joint Compound used for taping, covering tape, filling cornerbead and spotting nails.
FORMULA Raw Material
Source
X Act. Ingr.
Lbs./Batch
Hater
Nalco 71-D5 Filler AK-970 Elvacet 81-900 Benzoflex 50
Acme Plant
Nalco. Chemical Co. ja&^Piant DuPont Tennessee Products Co.
0.10 91.4
8.00 0.50
<3>` 0 '
100.00
ii66.y**g^i^2kr'
*Approxlmately 52 lb./lOO lbs. of active ingredients (this may vary - 2 gallons per batch).
**One batch yields 17 (-;) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail.
TESTING PROCEDURE
Working Consistency - Refer to Plant Testing Procedure No. 32.
Specifications for Pante:
,5-00 4S40 Brabender -
If paste 1b not proper working consistency, a
maximum of 55 c.c. water per 150 grama of
paste may be added,to^adjust.
Sip
oa
-*&&***
Working Properties - Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undlspersed particles. Plaster shall be free from lumps due to incom plete mixing.
Bonding Properties - R'lfer
Specifications:
Alter fiber
Crack Resistance
- Refer to Plant Testing Procedure No. 37.
Specifications:
Color Specifications:
There shall be no large fissure cracks in the wedge, no cracks in the thinner half of the wedge.
- White
SGP 0017799
Dried compound shall match color of standard sample.
V
s a * ./ /
Ill I y II, I 'flirt Supersedes Tex - 975 Dated 2/25/66
ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-975 (HAND TOOLS) (READY MIX "X")
DESCRIPTION OF PRODUCT - White Ready Mixed Joint Compound used for taping, covering tape, filling cornerhead and spotting nails.
-/ FORMULA
Raw Mate ial
Source
% Act. Ingr.
Lbs./Batch
Water
Filler TEK-970 Elvacet 61-900 Benzof lex 50
Acme Plant
Acme Plant
91.5
Dupont
8.00
Tennessee Products Co. ______ 0.50
400.0 (48 gal.)*
` 700.0 61.5 4.0
100.00-
1165.5**
*Approximately 52 lb./lOO lbs. of active ingredients (this may vary + 2 gallons per batch).
**0ne batch yields 17 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail.
TESTING PROCEDURE
Working Consistency - Refer to Plant Testing Procedure No. 32.
Specifications for Paste:
If paste is not proper working consistency, a maximum of 5 c.c. water per 150 grams of paste may be added to adjust.
-/ Brabender - 580
to
-/ Working Properties - Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incom plete mixing.
-/ Bonding Properties
Refer to Plant Testing Procedure No. 35.
Specifications:
After compound has dried, tape shall show at least 90% fiber tear when delaminated.
Crack Resistance
Refer to Plant Testing Procedure No. 37.
Specifications:
There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
Color Specifications
White Dried compound shall match color of standard sample.
RRB:kgc -/ Indicates changes in this reissue
SGP 0017800
November 4, 1968. Supersedes Tex - 975 Dated 7/31/68
ACME, TEXAS PLANT FORMULA
READY MIX JOINT COMPOUND TEX-975 (HAND TOOLS) (READY MIX*"X")
DESCRIPTION OF PRODUCT - White Ready Mixed Joint Compound used for taping, covering tape, filling cornerhead and spotting nails.
/ FORMULA
Raw Material
Function
Water
Solvent
Filler Elvacet 81-9CJ -^cBenzof lex 50
Body Adhesive Plasticizer
R.M. Spec. 7o Act. Ingr.
91.5 185 8.00 183 0.50
Lbs./Bgtch
400.0 (48 gal )*
700.0 61.5
_____ 4.0
100.00
1165.5**
*Approximately 52 lb./lOO lbs. of active ingredients (this may vary + 2 gallons per batch).
**0ne batch yields 17 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail.
TESTING PROCEDURE
Working Consistency - Refer to Plant Testing Procedure No. 32.
Specifications for Paste: -
If paste is not proper working consistency, a maximum of 5 c.c. water per 150 grams of paste may be added to adjust.
Brabender - 580 + IO
Working Properties - Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
Bonding Properties - Refer to Plant Testing Procedure No. 35.
Specifications:
After fiber
Crack Resistance
Refer to Plant Testing Procedure No. 37.
Specifications:
Color Specifications:
RRB:kgc
There shall be no large fissure cracks in the wedge, no cracks in the thinner half of the wedge.
White Dried compound shall match color of standard sample.
-/ Indicates changes^ in this/reissue.
... . fia 6, 4-
^
SGP 0017801
July 2, 1970 NEW FORMULA
ACME, TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX-9flf (HAND TOOLS)
DESCRIPTION OF PRODUCT
- White Ready Mix Joint Compound used for taping, covering tape, filling cornerbeads and spotting nailheads.
FORMULA Raw Material Nalco 71-D5 Water UCAR WC 131 Ethylene Glycol Filler TEX-975
WORKING CONSISTENCY: Specifications:
Brabender Viscosity:
WORKING PROPERTIES: Specifications
BONDING PROPERTIES: Specifications
CRACK RESISTANCE: Specifications
COLOR: Specifications
Function
R.M.Spec.
Percent
Lbs/Batch
Anti-foaming agent Solvent Adhesive Wet edge extender
-
185
-
.07 -
7.25 0.5 92.18 100.00
0.5 400.0
55.0 4.0
700.0 1159.5
- Refer to'Plant Testing Procedure No. 32. If paste is not of proper working consistency. a maximum of 5 cc of water per 150 grams of paste may be added to adjust.
- 580 +-io'
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
White Dried compound shdll match color of standard sample.
EDO:dek
SGP 0017802
September 1, 1970 Supersedes Formula No. TEX-975 Dated 7/9/70
ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX-975 (HAND TOOLS)
DESCRIPTION OF PRODUCT: - WhlteReady Mix Joint Compound used for taping, covering tape, filling cornerbeads and spotting nailheads.
/ FORMULA: Raw Material
Nalco 71-D5 Water Preplasticized PVA
Emuls ion Ethylene Glycol Filler TEX-97^
Function
R.M.Spec.
Anti-Foaming agent Solvent
Adhesive Wet edge extender
185
Percent
.07
5.38 .05
94.05 100.00
Lbs/Batch'
0.5 400.0
40.0 4.0
700.0 1144.5
WORKING CONSISTENCY: Specifications:
Brabender Viscosity:
WORKING PROPERTIES: Specifications:
Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust.
--580"+ tO
i:/o
</ 1, C'.J-m-S s->i 7!
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES: Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
CRACK RESISTANCE: Specifications:
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
GOLOR: Specifications:
White
Dried compound shall match color of standard s amp1e.
' ? //
-/ Denotes change in this reissue.
EDO:dek
SGP 0017803
March 31, 1972 Acme No. TEX-975 NEW
ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX-975 ('MACHINE TOOLS)
DESCRIPTION OF PRODUCT;
FORMULA Raw Material
Nalco 71-D5 Water Preplasticized PVA
Emulsion Filler TEX-W<?7J
- White Ready Mix Joint Compound used for taping, covering tape, filling corner beads and spotting nailheads. To be used in 4 gallon cartons only.
Function
Anti-foaming agent Solvent
Adhesive m
R.M.Spec.
Percent 0.1
Lbs/Batch S.OO
1245.00 4150-gat
185 5.0 100.00 :l
**0ne batch yields
+ a. 65 - one 4 gallon cartons.
100.00 3244.67'
WORKING CONSISTENCY: Specifications
Brabender Viscosity
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust.
zu~~-
3 76T I
Refer to Plant Testing Procedure No. 31 Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed parti cles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least'75% fiber tear when delaminated.
CRACK -RESISTANCE; Specifications
There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
. COLOR: Specifications
White Dried compound shall match color of standard sample.
EDO:elz
SGP 0017804
May 17, 1972 Supersedes Formula TEX-975
. Dated 3/31/72
ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO, TEX-975 ('MACHINE TOOLS)
DESCRIPTION OF PRODUCT:
-/ FORMULA Raw Material
Nalco 71-D5 Water Preplasticized PVA
Emulsion Filler TEX- 973
- White Ready Mix Joint Compound used for taping, covering tape, filling corner beads and spotting
nailheads. To be used in 4 gallon cartons only.
Function
Anti-foaming agent Solvent
Adhesive -
RoM.Spec.
-. -
185
Percent
0.1 -
5.0 1
Lbs/Batch
S.oq 4, -ttrt .
1245.00 (50 gal /3 O
100.00 * 9JI 1898,00. /7iO
100.00 3244.67
**0ne batch yields 65 - one 4 gallon cartons.
WORKING CONSISTENCY: Specifications
Brabender Viscosity
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust.
37 5 /$ Refer to Plant Testing Procedure No. 31 Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed parti cles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES: Specifications
Refer to Plant Testing Procedure No, 35. After compound has dried, tape shall show at least 757 fiber tear when- delaminated.
CRACK -RESISTANCE: Specifications
There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications
White
Dried compound shall match color of standard i
sample.
WNG: dek
* /0c^-f
.-/ Denotes change
SGP 0017805
August 22, 1973 Formula TEX-975 NEW
ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-975
DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-978 and TEX-97 9.
FORMULA
Raw Material Asbestos SG210 Gendriv 492S Dowicil 100 Gelvatol 6000 Attagel 40 Mica p80-H Land Plaster TEX-25
Function 'Fiber Filler Thickener Fungicide Adhesive Fiber Filler Anti-cracking Filler
agent
RM Spec
13 223 126 126
9 11
Percent
1.50 .50 .15
1.60
2.50 9.00 84.75
Lbs/Ba
120.0 40.0 12.0
128.0
200.0 720.0 6780.0
100.00 8000.0
WORKING CONSISTENCY Specifications:
Refer to Plant Testing Procedure No. 32
Maximum
Minimum
Average
62 58 60
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33 - Filler shall be very heavily bodied and possess
fair plasticity. It shall be free of any coarse gritty or undispersed particles.
COLOR Specifications
- White - Dried compound shall match color of standard
sample.
NOTE:
A wet mix of the filler shall be prepared according to Formula TEX "979 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-979.
WNG:e1z
SGP 0017806
September 5, 1973 Supersedes: Formula TEX-975
Dated 8/22/73
ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-975
DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-978 and TEX-979.
FORMULA
Raw Material Asbestos SG210 Gendriv 492S Dowicil 75 Gelvatol 6000 Attagel 40 Mica p80-H Land Plaster TEX-25
Function
RM Spec
Fiber Filler Thickener
13 223
Fungicide
126
Adhesive
126
Fiber Filler
9
Anti-cracking agent
11
Filler
Percen t
1.50 .50 .20
1.60
2.50 9.00 84.70
Lbs/Batch
120.0 40.0 16.0
128.0
3. o l.o , H-
3. <4
200.0 5.0 720.0 1 K o 67-7.6.0 / C>
100.00 8000.0
WORKING CONSISTENCY Specifications:
Refer to Plant Testing Procedure No. 32
Maximum
Minimum
Average
62 58 60
WORKING PROPERTIES Specifications
COLORSpecifications
- Refer to Plant Testing Procedure No. 33 - Filler shall be very heavily bodied and possess
fair plasticity. It shall be free of any coarse gritty or undispersed particles.
- White - Dried compound shall natch color of standard
sample.
NOTE:
A wet mix of the filler shall be prepared according to Formula TEX_979 at least twice a day or with every sixth or seventh batch of filler manufactured. This orepared mix shall be cested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-979..
WNG:elz -/ indicates change
SGP 0017807
May 19, 1977 Ready Mix Formula TEX-977 NEW
ACME, TEXAS, PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX 975 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, finishing, filling corner beads and spotting nailheads. To be used for selective market trials only.
FORMULA
FUNCTION
RM Spec
Percent Lbs/Batch
Nalco 7L-D5 *Water Elvace EP-200 Filler TEX-970
Anti-foaming agent Solvent Adhesive
--
125 0.1
2.00
- - 1228.00 (148 gal
185 2.0 40.00 (4.5 gal
-
97.9
1958.00
100.0 . 3228.00
One batch yields 64 + one 4 gallon carton or 52 + one 5 gallon pail.
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
* Brabender Viscosity - 520 + 20 For machine mix add 8 gallons H2O (365 + 20)
WORKING PROPERTIES-
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any course, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
CRACK RESISTANCE
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:j r
SGP 0017808
May 23, 1977 Ready Mix Formula TEX-975 NEW
ACtfE, TEXAS, PLANT FORMULA READY MIX JOINT COMPOuk) NO. TEX 975 (HAND TOOLS)
DESCRIPTION QF PRODUCT - White Ready Mix Joint Compound used for taping, finishing, filling corner beads and spotting nailheads. To be used for selective market trials only.
FORMULA
Nalco 71-D5 *Water Elvace EP-200 Filler TEX-970
FUNCTION
Anti-foaming agent Solvent Adhesive
--
RM Spec
125
185 -
Percent Lbs/Batch
0.1
2.0 97.9
2.00 1228.00
40.00 1958.00
(148 gal (4.5 gal
100.0
3228.00
One batch yields 64 + one 4 gallon carton or 52 + one 5 gallon pail.
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
* Brabender Viscosity
520 + 20 For machine mix add 8 gallons 112^(365 + 20)
WORKING PROPERTIES
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any course, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear wljen delaminated.
CRACK RESISTANCE
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no crocks in the thinner half of the wedge.
COLOR Specifications
- White Dried compound shall match color of standard sample.
WNG:jr
SGP 0017809
August 31, 1977 Supersedes Formula TEX-975 Dated May 23, 1977
ACME, TEXAS, PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX 975 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, finishing, filling corner beads and spotting nailheads.
FORMULA
Dowicil 75 Nalco 71-D5 *Water Elvace EP-200 Filler TEX-970
FUNCTION
Preservative Anti-foaming agent Solvent Adhesive
--
RM Spec
125
-
185 -
Percent
0.1
-
2.0 97.9
Lbs/Batch 5.00 2.00
847.00 (102 0.00 (4.5
1958.00
100.0
2852.00
/ One batch yields 60 + one A gallon carton or 46 + one 5 gallon pail.
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
* Brabender Viscosity - 520 + 20 For machine mix add 8 gallons H2O (365 + 20)
WORKING PROPERTIES
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any course, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES'
Refer to Plant Testing Procedure No. .35. After compound has dried, tape shall show at least 757, fiber tear when delaminated.
CRACK RESISTANCE
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
-/denotes change WNG:jr
SGP 0017810
September 15, 1977 Supersedes Formula TEX-975 Dated August 31, 1977
ACME, TEXAS, PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX 975 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, finishing, filling corner beads and spotting nailheads.
FORMULA
Dowicil 75 Nalco 71-D5 *Water Elvace EP-200 /Filler TEX-970
FUNCTION
Preservative Anti-foaming agent Solvent Adhesive
--
RM Spec
125 -
185 -
Percent
.35 0.1
2.0
97-15
Lbs/Batch
7.00 2.00
847.00 40.00
1958.00
(102 gal (4.5 gal
100.0
2854i00
/ One batch yields 60 + one 4 gallon carton or 46 + one 5 gallon pail.
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
* Brabender Viscosity - 520 + 20 For machine mix add 8 gallons H2O (365 + 20)
WORKING PROPERTIES -
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any course, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
BONDING PROPERTIES
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show atr least 75% fiber tear when delaminated.
CRACK RESISTANCE
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
-/denotes change WNG:jr
SGP 0017811
October 26,, 1977 Supersedes Formula TEX-975 Dated September 1^1977
ACME, TEXAS, PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX 975 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, finishing, filling corner beads and spotting nailheads.
FORMULA
/ Proxcel CRL Nalco 71-D5 *Water Elvace EP-200
-/Filler TEX-970
FUNCTION
Preservative Anti-foaming agent Solvent Adhesive
--
RM Spec
125 -
185 -
Percent .115
0.1 -
2.0 97.785
Lbs/Batch 2,23 2.00
847.00 (102 40.00 (4.5
1962.77
100.0
2854.00
One batch yields 60 + one 4 gallon carton or 46 + one 5 gallon pail.
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
* Brabender Viscosity - 520 + 20 For machine mix add 8 gallons H2O (365 + 20)
WORKING PROPERTIES
BONDING PROPERTIES CRACK RESISTANCE COLOR
Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any course, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing.
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.-
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge.
- White Dried compound shall match color of standard sample.
-/dendtes change HCF:jr
SGP 0017812
December 21, 1978 Formula TEX-975 NEW
ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-975
DESCRIPTION OF PRODUCT - Filler for ready mix Compound TEX-978.
To be shipped to Phoenix or other approved markets only.
FORMULA Raw Material
Function
RM Spec
Percent
Lbs/Batch
Pyrophylite Gypsum Mica p80H Methocel 8898.2 Minugel FG Soda Ash AquaFil K-8 Staramic 105
WORKING CONSISTENCY:
Bulking Agent Filler Anti-Cracking Water Retention Bulking ph Stabilizer Bulking Adhesive
11 8
23
4.368 84.862
3.120 .374
1.872 .100
4.368 .936
100.000
Refer to Plant Testing Procedure No. 32.
350 6800
250 30
150 8
350 75
8013
Minimum - 58
Maximum - 62 Average - 60
WORKING CONSISTENCY:
Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles.
COLOR:
White Dried compound shall match color of standard.
NOTE:
A wet mix of the filler shall be prepared according to formula TEX-978 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula TEX-978.
GWG:jr
SGP 0017813
April 9, 1979 Supersedes Formula TEX-975 Dated 12/21/78
ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-975
DESCRIPTION OF-PRODUCT - Filler for ready mix Compound TEX-978 and topping Compound TEX-970.
FORMULA Raw Material
Function
RM -SC
Percent
Lbs/Batch
Pyrophylite Gypsum Mica p80H Methocel 8898.2 Minugel FG Soda Ash AquaFil K-8 Staramic 105
WORKING CONSISTENCY:
Bulking Agent Filler Anti-Cracking Water Retention Bulking ph Stabilizer Bulking Adhesive
11 8
23
4.368 84.862
3.120 ,374
1.872 .100
4.368 .936
100.000
Refer to Plant Testing Procedure No. 32.
350 6800
250 30
150 8
350 75
8013
Minimum - 58
Maximum - gp Average - 60
WORKING CONSISTENCY:
Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse^ gritty or undispersed particles.
COLOR:
White Dried compound shall match color of standard.
NOTE:
A wet mix of the filler shall be prepared according to formula TEX-978 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula TEX-978.
* Hamaco 267 can be substituted at an equal loading.
HCF:ps
SGP 0017814
SGP 0017798
CONTAINING PRODUCTS