Document jLJRnv8bqa8gkKeYzojkOELZ

/ 206-02-3 Drum Brake V GENERAL PROCEDURES (Continued) 206-02-3 2. Adjust the rear brake shoes and linings. i Rotate'the brake adjusting screw until the brake shoes and linings touch the tool. 3. Rotate the brake shoe adjusting screw. . 1 Move the brake shoe adjusting lever off the brake shoe adjusting screw. 2 Using the special tool or equivalent turn the adjusting screw until the brake drum begins to drag. Then loosen the brake adjusting screw until the brake drum rotates Brake Drums Installed m 1. With the vehicle in NEUTRAL, position it on a hoist For additional information, refer to Section 100-02. 2. At the back of the brake backing plate, remove the brake adjusting hole cover. 4. Install a new brake backing plate adjusting hole cover. , REMOVAL AND INSTALLATION Brake Drum Special Tool(s) \' Brake/Clutch/Service Vacuum 164-R3622 or equivalent ST1342-A v. Brake Drum Micrometer 104-00046 or equivalent I 2006 Ranger, 9/2005