Document jB7gObg4zXj87n6vqOzKjMYx9

TotalEnergies SAFETY DATA SHEET Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2020/878 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG previous revision date : 2023/04/26 SECTION 1: Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Product name : DC COOLING BIOLIFE 4 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses Manufacture of substance - Industrial Distribution of substance - Industrial Formulation and (re)packing of substances and mixtures - Industrial Use in functional fluids - Consumer Use in functional fluids - Industrial Use in functional fluids - Professional Use in laboratories - Industrial Use in laboratories - Professional 1.3 Details of the supplier of the safety data sheet TotalEnergies Fluids 2 Place Jean Millier 92078 Paris La Defense Cedex FRANCE Tel: +33 (0)1 41 35 40 00 Fax: +33 (0)1 41 35 82 88 @totalenergies.com TotalEnergies Marketing Belgium Anspachlaan 1, bus 2 / Boulevard anspach 1, boite 2 1000 Brussel/Bruxelles -- Belgie/Belgique Tel: 933 Fax: 260 @totalenergies.com Contact H.S.E 1.4 Emergency telephone number Supplier Telephone number : National advisory body/Poison Center : Supplier (info product): +44 1235239670 SOS TotalEnergies Marketing Belgium (transport): +32 78 15 51 51 Revision:2023/07/24 Version : 2 Belgium ENGLISH 1/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG SECTION 2: Hazards identification 2.1 Classification of the substance or mixture Product definition : Mixture Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Asp. Tox. 1, H304 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms. 2.2 Label elements Hazard pictograms : Signal word : Danger Hazard statements : H304 - May be fatal if swallowed and enters airways. Precautionary statements Prevention : Not applicable. Response : P301 + P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor. P331 - Do NOT induce vomiting. Storage : Not applicable. Disposal : Not applicable. Contains : Renewable hydrocarbons, C17-C18, branched alkanes Supplemental label elements : Not applicable. Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles : Not applicable. NO (for visibility) 2.3 Other hazards This mixture does not contain any substances that are assessed to be a PBT or a vPvB in a concentration >= 0,1 %. Other hazards which do not result in classification : Vapor may be irritating to eyes and respiratory system. SECTION 3: Composition/information on ingredients 3.2 Mixtures : Mixture Product/substance Identifiers % (w/w) Classification Renewable hydrocarbons, REACH #: 90 C17-C18, branched alkanes 01-2120107957-49 EC: 942-446-7 CAS: 90622-53-0* Asp. Tox. 1, H304 Specific Conc. Limits, M-factors and ATEs - Type [1] Revision:2023/07/24 Version : 2 Belgium ENGLISH 2/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG See Section 16 for the full text of the H statements declared above. Additional information : content of aromatic compounds: <0.005% There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment, are PBTs, vPvBs or Substances of equivalent concern, or have been assigned a workplace exposure limit and hence require reporting in this section. Type [1] Substance classified with a health or environmental hazard The EC substance definition and related classification & labelling have been developed in the framework of the Regulation (EC) No 1907/2006 (REACh). The related CAS number* is used for the purpose of the international inventories present in section 15 of the SDS. Occupational exposure limits, if available, are listed in Section 8. [GHS EU]_Detergent product : Indicator SECTION 4: First aid measures 4.1 Description of first aid measures Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs. Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Skin contact : Wash skin thoroughly with soap and water or use recognized skin cleanser. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse. Ingestion : Get medical attention immediately. Call a poison center or physician. Wash out mouth with water. Remove dentures if any. Aspiration hazard if swallowed. Can enter lungs and cause damage. Do not induce vomiting. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Use adequate personal protective equipment as needed 4.2 Most important symptoms and effects, both acute and delayed Over-exposure signs/symptoms Eye contact : No specific data. Inhalation : No specific data. Skin contact : Adverse symptoms may include the following: irritation dryness cracking Ingestion : Adverse symptoms may include the following: nausea or vomiting Revision:2023/07/24 Version : 2 Belgium ENGLISH 3/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG 4.3 Indication of any immediate medical attention and special treatment needed Notes to physician : If swallowed accidentally, the product may enter the lungs due to its low viscosity and lead to the rapid development of very serious pulmonary lesions (medical survey during 48 hours) Specific treatments : No specific treatment. SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing media : Use dry chemical, CO, water spray (fog) or foam. Sand. Unsuitable extinguishing media : Do not use a solid water stream as it may scatter and spread fire 5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture : In a fire or if heated, a pressure increase will occur and the container may burst. Hazardous combustion products : Decomposition products may include the following materials: Carbon dioxide (CO). carbon monoxide various hydrocarbons Aldehyde. Soot 5.3 Advice for firefighters Special protective actions for fire-fighters Special protective equipment for fire-fighters Additional information : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a basic level of protection for chemical incidents. : Not considered explosive based on chemical structure and oxygen balance considerations SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel". 6.2 Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). 6.3 Methods and materials for containment and cleaning up Revision:2023/07/24 Version : 2 Belgium ENGLISH 4/30 DC COOLING BIOLIFE 4 Small spill Large spill SDS # :C3DPQMBPG : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. : Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. 6.4 Reference to other sections : See Section 1 for emergency contact information. See Section 8 for information on appropriate personal protective equipment. See Section 13 for additional waste treatment information. SECTION 7: Handling and storage 7.1 Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not swallow. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container. Advice on general occupational hygiene : Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures. 7.2 Conditions for safe storage, including any incompatibilities Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use. 7.3 Specific end use(s) Recommendations Industrial sector specific solutions : See exposure scenarios : Not available. SECTION 8: Exposure controls/personal protection 8.1 Control parameters Occupational exposure limits No exposure limit value known. Reportable hazardous constituent(s) contained in UVCB and/or multi-constituent substance(s) complying with the classification criteria and/or with an exposure limit (OEL) No exposure limit value known. Biological Limit Values (BLV) No exposure indices known. Revision:2023/07/24 Version : 2 Belgium ENGLISH 5/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG Recommended monitoring : procedures Advisory OEL : DNELs/DMELs No DNELs/DMELs available. Reference should be made to monitoring standards, such as the following: European Standard EN 689 (Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy) European Standard EN 14042 (Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents) European Standard EN 482 (Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents) Reference to national guidance documents for methods for the determination of hazardous substances will also be required. Mineral oil mist: USA: OSHA (PEL) TWA 5 mg/m3, NIOSH (REL) TWA 5 mg/m3, STEL 10 mg/m3, ACGIH (TLV) TWA 5 mg/m3 (highly refined) PNECs No PNECs available. 8.2 Exposure controls Appropriate engineering controls : Good general ventilation should be sufficient to control worker exposure to airborne contaminants. Individual protection measures Hygiene measures Eye/face protection : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. : In splash contact: safety glasses with side-shields or face shield Skin protection Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated. Repeated or prolonged exposure Glove material: Nitrile rubber; Glove thickness > 0.55 mm; Break through time > 480 min; standard : EN 374 Glove material: Fluorinated rubber; any thickness; Break through time > 480 min; standard : EN 374 Glove material: polyvinyl alcohol (PVA); any thickness; Break through time > 480 min; standard : EN 374 In case of contact through splashing Glove material: Nitrile rubber; Glove thickness > 0.38 mm; Break through time > 60 min; standard : EN 374 Glove material: Neoprene; Glove thickness > 0.75 mm; Break through time > 60 min; standard : EN 374 Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Wear gloves according to EN374 resistant to the solvent(s) in use. Body protection : Wear suitable protective clothing. Protective shoes or boots. Revision:2023/07/24 Version : 2 Belgium ENGLISH 6/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG Respiratory protection Environmental exposure controls : Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. Wear a respirator conforming to EN140 with type A filter or better. : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. SECTION 9: Physical and chemical properties The conditions of measurement of all properties are at standard temperature (20C / 68F) and pressure (1013 hPa) unless otherwise indicated 9.1 Information on basic physical and chemical properties Appearance Physical state : Liquid. Color : Colorless. Odor : Odorless. pH : Not applicable. Melting point/freezing point : -30C Initial boiling point and boiling range : 285 to 335C [ISO 3405] Product is non-soluble (in water). Flash point Flammability Lower and upper explosion limit : Closed cup: >135C [ISO 2719] : Non-flammable in the presence of the following materials or conditions: open flames, sparks and static discharge and heat. : Not available. Vapor pressure Vapor density Relative density : 0.0008 kPa [EN 13016-1] : Not available. : 0.785 [ISO 12185] Density Solubility(ies) : 0.785 g/cm [15C] [ISO 12185] : Media water Result Not soluble Miscible with water : No. Partition coefficient: n-octanol/ : Not applicable. water Auto-ignition temperature : >300C [ISO 20823] Decomposition temperature : Not available. Viscosity Particle characteristics Median particle size : Kinematic (room temperature): 3 to 4.5 mm2/s Kinematic (40C): <20.5 mm2/s [ISO 3104] : Not applicable. 9.2 Other information Evaporation rate Pour point Explosive properties : >15 (butyl acetate = 1) [DIN 53170] : -35C (-31F) : Not considered explosive based on chemical structure and oxygen balance considerations Revision:2023/07/24 Version : 2 Belgium ENGLISH 7/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG Oxidizing properties : This product is not considered oxidising based on chemical structure considerations SECTION 10: Stability and reactivity 10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients. 10.2 Chemical stability : Stable under recommended storage and handling conditions (see Section 7). 10.3 Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur. 10.4 Conditions to avoid : heat, open flames, sparks and static discharge 10.5 Incompatible materials : Reactive or incompatible with the following materials: strong acids Strong oxidizing agents 10.6 Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 Acute toxicity Product/substance Result Species Dose Renewable hydrocarbons, C17-C18, branched alkanes LD50 Dermal LD50 Oral Rat >2000 mg/kg Rat >5000 mg/kg Acute toxicity estimates N/A Not available. Exposure Test - EU EC B3 - EU EC B1 tris Conclusion/Summary Irritation/Corrosion Conclusion/Summary Skin Eyes Respiratory Sensitization Conclusion/Summary Skin Respiratory Mutagenicity Conclusion/Summary : Based on available data, the classification criteria are not met. Not available. Not available. Not available. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. Not available. Not available. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. Not available. : Based on available data, the classification criteria are not met. Carcinogenicity Conclusion/Summary Reproductive toxicity Conclusion/Summary Teratogenicity Not available. : Based on available data, the classification criteria are not met. Not available. : Based on available data, the classification criteria are not met. Not available. Revision:2023/07/24 Version : 2 Belgium ENGLISH 8/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG Conclusion/Summary : Based on available data, the classification criteria are not met. Specific target organ toxicity (single exposure) Conclusion/Summary : Based on available data, the classification criteria are not met. Specific target organ toxicity (repeated exposure) Conclusion/Summary : Based on available data, the classification criteria are not met. Aspiration hazard Product/substance Renewable hydrocarbons, C17-C18, branched alkanes Result ASPIRATION HAZARD - Category 1 Conclusion/Summary : Based on available data, the classification criteria are met. Information on the likely routes of exposure : Not available. Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : Defatting to the skin. May cause skin dryness and irritation. Ingestion : May be fatal if swallowed and enters airways. Symptoms related to the physical, chemical and toxicological characteristics Eye contact : No specific data. Inhalation : No specific data. Skin contact : Adverse symptoms may include the following: irritation dryness cracking Ingestion : Adverse symptoms may include the following: nausea or vomiting Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate effects : Not available. Potential delayed effects : Not available. Long term exposure Potential immediate effects : Not available. Potential delayed effects : Not available. Potential chronic health effects Not available. Conclusion/Summary General Carcinogenicity Mutagenicity Reproductive toxicity : Not available. : No known significant effects or critical hazards. : No known significant effects or critical hazards. : No known significant effects or critical hazards. : No known significant effects or critical hazards. 11.2 Information on other hazards Revision:2023/07/24 Version : 2 Belgium ENGLISH 9/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG 11.2.1 Endocrine disrupting properties This product does not contain any substance present at a concentration equal to or greater than 0.1% by mass, included in the list drawn up in accordance with article 59, paragraph 1 of the REACh Regulation, due to its endocrine disrupting properties, or a substance known to have endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation 2018/605. 11.2.2 Other information Not available. SECTION 12: Ecological information 12.1 Toxicity Product/substance Result Species Exposure Test Renewable hydrocarbons, C17-C18, branched alkanes Acute EC50 3201 mg/l Acute LL50 64742 mg/l Algae - Skeletonema costatum Daphnia - Acartia tonsa 72 hours 48 hours Acute LL50 1028 mg/l Acute NOELR 993 mg/l Chronic NOELR 1001 mg/l Chronic NOELR >1000 mg/l Fish Algae - Skeletonema costatum Daphnia - Daphnia magna Fish - Oncorhynchus mykiss 96 hours 72 hours 21 days 28 days ISO 10253 ISO TC147/SC5/WG2 ISO 10253 - Conclusion/Summary : Not available. 12.2 Persistence and degradability Product/substance Test Renewable hydrocarbons, OECD 306 C17-C18, branched alkanes Conclusion/Summary : Not available. Product/substance Aquatic half-life Renewable hydrocarbons, C17-C18, branched alkanes Result 83 % - Readily - 28 days Dose - Photolysis - Inoculum - Biodegradability Readily 12.3 Bioaccumulative potential Not available. 12.4 Mobility in soil Soil/water partition coefficient (KOC) Mobility Mobility in soil : Not available. : Not available. : Given its physical and chemical characteristics, the product generally shows low soil mobility The product is insoluble and floats on water 12.5 Results of PBT and vPvB assessment This mixture does not contain any substances that are assessed to be a PBT or a vPvB in a concentration >= 0,1 %. 12.6 Endocrine disrupting properties Revision:2023/07/24 Version : 2 Belgium ENGLISH 10/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG This product does not contain any substance present at a concentration equal to or greater than 0.1% by mass, included in the list drawn up in accordance with article 59, paragraph 1 of the REACh Regulation, due to its endocrine disrupting properties, or a substance known to have endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation 2018/605. 12.7 Other adverse effects No known significant effects or critical hazards. SECTION 13: Disposal considerations 13.1 Waste treatment methods Product Methods of disposal : Hazardous waste : Packaging Methods of disposal : Special precautions : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. The classification of the product may meet the criteria for a hazardous waste. According to the European Waste Catalogue, Waste Codes are not product specific, but application specific The generation of waste should be avoided or minimized wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. SECTION 14: Transport information ADR/RID ADN IMDG ICAO/IATA 14.1 UN number or ID number Not regulated. Not regulated. Not regulated. Not regulated. 14.2 UN proper - - - - shipping name 14.3 Transport - - - - hazard class(es) 14.4 Packing - - - - group 14.5 No. No. No. No. Environmental hazards 14.6 Special precautions for user : Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage. Revision:2023/07/24 Version : 2 Belgium ENGLISH 11/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG 14.7 Maritime transport in bulk according to IMO instruments : Not available. SECTION 15: Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorization Annex XIV None of the components are listed. Substances of very high concern None of the components are listed. Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles Other EU regulations Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical agents at work Industrial emissions (integrated pollution prevention and control) Air : Not listed Industrial emissions (integrated pollution prevention and control) Water : Not listed Explosive precursors : Not applicable. Ozone depleting substances (1005/2009/EU) Not listed. Prior Informed Consent (PIC) (649/2012/EU) Not listed. Persistent Organic Pollutants Not listed. Seveso Directive This product is not controlled under the Seveso Directive. National regulations International regulations Chemical Weapon Convention List Schedules I, II & III Chemicals Not listed. Montreal Protocol Not listed. Stockholm Convention on Persistent Organic Pollutants Revision:2023/07/24 Version : 2 Belgium ENGLISH 12/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG Not listed. Rotterdam Convention on Prior Informed Consent (PIC) Not listed. UNECE Aarhus Protocol on POPs and Heavy Metals Not listed. LU - Luxembourg prohibited chemicals in the workplace Not listed. Inventory list Australia inventory (AIIC) : All components are listed or exempted. Canada inventory (DSL/NDSL) : All components are listed or exempted. China inventory (IECSC) : All components are listed or exempted. Europe inventory (EC) : All components are listed or exempted. Japan inventory : Japan inventory (CSCL): All components are listed or exempted. Japan inventory (ISHL): Not determined. New Zealand Inventory of Chemicals (NZIoC) : All components are listed or exempted. Philippines inventory (PICCS) : All components are listed or exempted. Korea inventory (KECI) : All components are listed or exempted. Taiwan Chemical Substances Inventory (TCSI) : All components are listed or exempted. Thailand inventory : Not determined. Turkey inventory : Not determined. United States inventory (TSCA 8b) : All components are listed or exempted. Vietnam inventory : Not determined. The information stated in this section relates solely to the conformity of the chemical product with the countries Inventories. The information used to confirm the inventory status of this product may be based on additional data to the chemical composition shown in Section 3. Other regulations may apply for importation or marketing authorizations. 15.2 Chemical Safety Assessment : This product contains substances for which Chemical Safety Assessments are still required. SECTION 16: Other information Indicates information that has changed from previously issued version. Abbreviations and acronyms : ATE = Acute Toxicity Estimate CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008] DNEL = Derived No Effect Level DMEL = Derived Minimal Effect Level EUH statement = CLP-specific Hazard statement N/A = Not available PBT = Persistent, Bioaccumulative and Toxic vPvB = Very Persistent and Very Bioaccumulative PNEC = Predicted No Effect Concentration LC50 = Median lethal concentration LD50 = Median lethal dose OEL = Occupational Exposure Limit VOC = Volatile Organic Compound UVCB Substance of unknown or Variable composition, Complex reaction products or Biological material NOEC No Observed Effect Concentration QSAR = Quantitative Structure-Activity Relationship Revision:2023/07/24 Version : 2 Belgium ENGLISH 13/30 DC COOLING BIOLIFE 4 SDS # :C3DPQMBPG polyvinyl alcohol (PVA) EC50 = Half maximal effective concentration BCF = Bioconcentration Factor LogPow = logarithm of the octanol/water partition coefficient NOELR = No observed Effect Loading Rate OECD = Organisation for Economic Co-operation and Development Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Classification Justification Asp. Tox. 1, H304 Calculation method Full text of abbreviated H statements H304 May be fatal if swallowed and enters airways. Full text of classifications [CLP/GHS] Asp. Tox. 1 ASPIRATION HAZARD - Category 1 Date of revision : 2023/07/24 previous revision date : 2023/04/26 Version :2 Notice to reader To the best of our knowledge, the information contained herein is accurate. However, neither the abovenamed supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Revision:2023/07/24 Version : 2 Belgium ENGLISH 14/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Industrial Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Manufacture of substance - Industrial : Identified use name: Manufacture of substance - Industrial Process Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b, PROC15 Substance supplied to that use in form of: As such Sector of end use: SU03, SU08, SU09, SU10 Subsequent service life relevant for that use: No. Environmental Release Category: ERC01, ERC04 : Not applicable. : Product characteristics Not applicable. : Manufacture of the substance or use as an intermediate or a process chemical or extraction agent. Includes recycling/recovery, material transfers, storage, maintenance and loading (including marine vessel/barge, road/rail car and bulk container), sampling and associated laboratory activities. Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 15/30 DC COOLING BIOLIFE 4 Manufacture of substance - Industrial Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 16/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Industrial Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Distribution of substance - Industrial : Identified use name: Distribution of substance - Industrial Process Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b, PROC09, PROC15 Substance supplied to that use in form of: As such Sector of end use: SU03, SU08, SU09 Subsequent service life relevant for that use: No. Environmental Release Category: ERC01, ERC02, ERC03, ERC04, ERC05, ERC06a, ERC06b, ERC06c, ERC06d, ERC07 : Not applicable. : Product characteristics Not applicable. : Loading (including marine vessel/barge, rail/road car and IBC loading) and repacking (including drums and small packs) of substance, including its sampling, storage, unloading distribution and associated laboratory activities. Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 17/30 DC COOLING BIOLIFE 4 Distribution of substance - Industrial Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 18/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Industrial Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Formulation and (re)packing of substances and mixtures - Industrial : Identified use name: Formulation and (re)packing of substances and mixtures Industrial Process Category: PROC01, PROC02, PROC03, PROC04, PROC05, PROC08a, PROC08b, PROC09, PROC14, PROC15 Substance supplied to that use in form of: As such Sector of end use: SU03, SU10 Subsequent service life relevant for that use: No. Environmental Release Category: ERC02 : Not applicable. : Product characteristics Not applicable. : Formulation, packing and re-packing of the substance and its mixtures in batch or continuous operations, including storage, materials transfers, mixing, tabletting, compression, pelletisation, extrusion, large and small scale packing, sampling, maintenance and associated laboratory activities. Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek Date of issue/Date of revision : 12/1/2020 19/30 DC COOLING BIOLIFE 4 immediate medical assistance , to cover this risk. Formulation and (re)packing of substances and mixtures - Industrial Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 20/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Industrial Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Use in functional fluids - Industrial : Identified use name: Use in functional fluids - Industrial Process Category: PROC01, PROC02, PROC03, PROC04, PROC08a, PROC08b, PROC09 Substance supplied to that use in form of: As such Sector of end use: SU03 Subsequent service life relevant for that use: No. Environmental Release Category: ERC07 : Not applicable. : Product characteristics Not applicable. : Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in industrial equipment including maintenance and related material transfers. Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 21/30 DC COOLING BIOLIFE 4 Use in functional fluids - Industrial Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 22/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Professional Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Use in functional fluids - Professional : Identified use name: Use in functional fluids - Professional Process Category: PROC01, PROC02, PROC03, PROC08a, PROC09, PROC20 Substance supplied to that use in form of: As such Sector of end use: SU22 Subsequent service life relevant for that use: No. Environmental Release Category: ERC09a, ERC09b : Not applicable. : Product characteristics Not applicable. : Use as functional fluids e.g. cable oils, transfer oils, coolants, insulators, refrigerants, hydraulic fluids in professional equipment including maintenance and related material transfers. Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 23/30 DC COOLING BIOLIFE 4 Use in functional fluids - Professional Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 24/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Industrial Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Use in laboratories - Industrial : Identified use name: Use in laboratories - Industrial Process Category: PROC10, PROC15 Substance supplied to that use in form of: As such Sector of end use: SU03 Subsequent service life relevant for that use: No. Environmental Release Category: ERC02, ERC04 : Not applicable. : Product characteristics Not applicable. : Use of the substance within laboratory settings, including material transfers and equipment cleaning Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 25/30 DC COOLING BIOLIFE 4 Use in laboratories - Industrial Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 26/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Professional Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Use in laboratories - Professional : Identified use name: Use in laboratories - Professional Process Category: PROC10, PROC15 Substance supplied to that use in form of: As such Sector of end use: SU22 Subsequent service life relevant for that use: No. Environmental Release Category: ERC08a : Not applicable. : Product characteristics Not applicable. : Use of small quantities within laboratory settings, including material transfers and equipment cleaning Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling worker exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other conditions affecting workers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling worker exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 27/30 DC COOLING BIOLIFE 4 Use in laboratories - Professional Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Workers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 28/30 Annex to the extended Safety Data Sheet (eSDS) Identification of the substance or mixture Product definition : Mixture Code : C3DPQMBPG Product name : DC COOLING BIOLIFE 4 Consumer Section 1 - Title Short title of the exposure scenario List of use descriptors Environmental contributing scenarios Health Contributing scenarios Processes and activities covered by the exposure scenario : Use in functional fluids - Consumer : Identified use name: Use in functional fluids - Consumer Sector of end use: SU21 Subsequent service life relevant for that use: No. Environmental Release Category: ERC09a, ERC09b Market sector by type of chemical product: PC16, PC17 : Not applicable. : Product characteristics Not applicable. : Use of sealed items containing functional fluids e.g. transfer oils, hydraulic fluids, refrigerants Section 2 - Exposure controls Contributing scenario controlling environmental exposure for 1: Not applicable. This substance is not classified for environmental hazards nor is a PBT/vPvB, an exposure assessment is not required Contributing scenario controlling consumer exposure for 2: Product characteristics Product characteristics : Substance is complex UVCB. Concentration of substance in mixture or article : Covers percentage substance in the product up to 100% (unless stated differently) Physical state : Liquid Frequency and duration of use/exposure : Covers daily exposures up to 8 hours (unless stated differently) Other given operational conditions affecting consumers exposure : Assumes a good basic standard of occupational hygiene has been implemented Contributing scenario controlling consumer exposure for 3: Not applicable. No exposure assessment presented for human health. The CLP hazard statement H304 (May be fatal if swallowed and enters airways) relates to a risk of aspiration which is associated to a non-quantifiable hazard determined by kinematic viscosity. This risk may arise if swallowed but also in case of vomiting after ingestion.The toxicity hazard of aspiration, although being a hazard for health, does not result from any observed toxicological effect characterized by a dose-response. Therefore no DNEL can be derived. Operational Conditions (OCs) and implementation of Risk Management Measures (RMMs) need to be proportional to the degree of concern for the health hazard presented by the substance. The exposure by ingestion should not exist in the case of any permitted uses of the substance. The hazard statement H304 is related to a misuse that should not occur during the identified uses stated in section 1.2 of Material Safety Data Sheet (MSDS). In case of any risk, it should be controlled by implementing RMMs tailored specifically. For any substance classified H304, these RMMs should be communicated via the MSDS by the use of the following statement: Do not ingest. If swallowed then seek immediate medical assistance , to cover this risk. Date of issue/Date of revision : 12/1/2020 29/30 DC COOLING BIOLIFE 4 Use in functional fluids - Consumer Section 3 - Exposure estimation and reference to its source Website: : Not available. Exposure estimation and reference to its source - Environment: 1: Not applicable. Exposure assessment (environment): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Consumers: 2: Product characteristics Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Exposure estimation and reference to its source - Consumers: 3: Not applicable. Exposure assessment (human): : Not applicable. Exposure estimation and reference to its source : Not available. Section 4 - Guidance to DU to evaluate whether he works inside the boundaries set by the ES Environment Health : Not applicable. : Available hazard data do not support the need for a DNEL to be established for other health effects. Risk management measures are based on qualitative risk characterisation. Additional good practice advice beyond the REACH CSA Environment Health : Not available. : Not available. Date of issue/Date of revision : 12/1/2020 30/30