Document gaOXy08a5k7nJV5gnGjeEwG5L

DownloadSearchable PDFRandom document
Soaterabar 20* 19-3 Suoerseacs rvrrula ri'E-?5. Dated Auk* 23* 1963 ACME, OT.S PI ANT FORMULA HOUSTON AILTuTtPOSZ, COMPOUND TMX-952 ro?:.-.uiA HAM MATERIAL Di-Ammonium PhoEphabo Vaneide 5l7> Petro-AD Kslsize IV, #2166 Lino Oxide Soda Ash ICaysoy, 20X Casein, 100II Asbestos, 7RF-9 Mica P80-H Kaieo 71-D5 limestone Santobrite Plnea (#1) SOURCE Open Market R.T. Vandervilt Co. The Tnrcnley Co. Kelco Co. Mallinkrodt Chem. Works Open Market Archer-Daniols-Kidland International Casein Co. Phillip Carey Co. Western Mca Co. Nalco Chemical Co. Purestone Co. Monsanto Cham. Co. .1-1. SPEC. - 126 1U3 - 119 32 122 10 9 13 10 (t 0 0.025 0.10 0.10 0.25 0.30 0.50 2.50 5.co 0.00 16.00 0.05 69.60 0.025 ioo.ooo WCRKT.i`3 COIJSISTBICT - Refer to Plant Testing Procedure No-. 32. Ihs/3atch 0.5 2.0 2.0 0.0 7.0 2.0.0 50o0 10C.0 110.0 320.0 1.0 >VM>cO C.5 000.6 Specification Max. 72 Kin. ~~mr ALKALI NET - Refer to Plant Testing Procedure Wo. 3li* Specification pH - Max. 9.3 Kin. *srr However, minimum soda ash content - O.50 WORMIHG PROPS FINS - Refer to Plant Testing Procedure Wo. 33. jVVS. O'j Avo, *- j 9.0 Specification - Viet mix shall be plastic and buttery wer'eing and free of coarse or gritty particles. BONDING PROPERTIES - Refer to Plant Testing Procedure No. 35* Specification CRACK REST STAMP! Specification CQIPR - After compound has dried, tape shall delaminate when peeled back. - Refer to Plant Testing Procedure No. 3? \ - There shall be no large fissure cracks in the v:cdge and very few, if any, cracks in the thinner half cf the wedge. - White Specification - Dried compound should match color of ivory v.w.coarc paper closely and be free of color streaks. -/ Denotes change, SGP 0017144 J August 25, 1966 TKX-952 NEW FORMULA ACME. TEXAS PLANT FORMULA ALL PURPOSE COMPOUND XEX-952 (For Memphis, Tenn. Area Only) DESCRIPTION OF PRODUCT - All Purpose Compound for taping, topping joints, and spotting nailheado and texturiug. FORMULA Raw Materials Source SUM. Spec. i Lbs./Batch Vaneide 51& Petro " AD Natrosol 250 HXR (Fine Grind) Zinc Oxide Soda Ash Borax Casein LOOM Asbestos 7RF9 Mica P80H Naico 71-D5 Lamestoil's (Pure- 8ton*) R, T. Vanderbilt The Thornley Co, 126 143 Hercules Powder Mallinkrodt Co, Open Market Open Market International Casein Co, Phillip Carey Western Mica Co, Naico Chemical Co1 o 170 119 32 10 S 11 Purestone Co, 13 0.075 0.10 0.30 0.10 0.40 0.15 4.5 5.5 17,0 0,025 71.85 100.000 1.5 2.0 6.0 2.0 8,0 3.0 90.0 110.0 340.0 0.5 1437.0 Tooo.o WORKING CONSISTENCY * Refer to Plant Testing Procedure No . 32. Specifications$ Maximum Minimum Average- 72 ""TE 68 ALKALINITY - Refer to Plant Testing Procedure No. 34, pH Specificatioas; Maximum 9.2 Minimum TT~ Minimum soda ash content ~ 0,40% Average WORKING PROPERTIES Refer to Plant Testing Procedure No, 33, Specifications; Wet mix shall be plastic and buttery working and free of grit or coarse particles. CRACK RESISTANCE Specificationsg There shall be at most, only a couple of very small cracks in the wedge. COLOR Specifications; DAMsse Dried compound should be a neutral color and match the standard sample. /?- 63 ,<r Mr a&> o'^'r ~c tC3 Jc Or SGP 0017145 V April 9, 1969 _ Supersedes Formula No. TEX- 952 Dated 8/25/69 ACME. TEXAS PLANT FORMULA ALL PURPOSE COMPOUND TEX-952 (For Memphis, Tenn. Area Only) DESCRIPTION OF PRODUCT - All Purpose Compound for taping, topping joints, and spotting nailheads and texturing. -/ FORMULA Raw Material Function R.M. Spec. % Vancide 51Z Petro AD Natrosol 250 HXR (Fine Grind) Zinc Oxide Soda Ash Borax Casein 100M Asbestos 7RF9 Mica p80H Defoamer Mill Limestone (Purestone) Fungicide Wetting Agent Water Retention Agent Viscosity Stabilizer Alkaline Source Alkaline Source Adhesive Bulk Anti-Cracking Agent Anti-Foaming Agent Filler 126 143 170 119 32 10 9 11 196 13 0.075 0.10 0.30 0.10 0.40 0.15 4.5 5.5 17.0 0.025 71.85 100.000 Lbs./Batch 1.5 2.0 6.0 2.0 8.0 3.0 90.0 110.0 340.0 0.5 1427.0 2000.0 - WORKING CONSISTENCY Specifications: Refer to Plant Testing Procedure No. 32. - Maximum Minimum Average 72 64 68 ALKALINITY pH Specificationsi: - Refer to Plant Testing Procedure No. 34. Maximum Minimum Average 9.2 8.6 8.9 Minimum soda ash content - 0.40% WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles. CRACK RESISTANCE Specifications: - There shall be at most, only a couple of very small cracks ini the wedge. COLOR Specifications: Dried compound should be a neutral color and match the standard sample. EDON:kgc -/ Denotes change in this reissue. SGP 0017146 July 2, 1970 Supersedes Formula No. TEX-955 Dated 5/27/70 ACME. TEXAS PLANT FORMULA ALL PURPOSE JOINT COMPOUND FORMULA NO. TEX-95tf DESCRIPTION OF PRODUCT; - All Purpose compound for taping and finishing joints, spotting nailheads and texturing. -/ FORMULA Raw Material Vanicide Cellosize QP 100,000 Gelvatol RS6219 Gelva GP 702 Asbestos 7RF-9 Mica P80-H Defoamer Mill Land Plaster TEX-25 WORKING CONSISTENCY: Specifications: WORKING PROPERTIES Specifications: BONDING PROPERTIES: Specifications: CRACK RESISTANCE: Specifications COLOR: Specifications Function R.M.Soec. Percent Lbs/Batch Fungicide Water Retention aid Adhesive Adhesive Bulking agent Anti Cracking agent Anti Foaming agent Filler 126 170 162 161 9 11 196 - .05 .20 2.5 1^0 4.0 5.0 .1 87.15 100.00 1.0 4.0 50.0 20.0 80.0 100.0 2.0 1743.0 2000.0 - Refer to Plant Testing Procedure No. 32. Maximum Minimum Averag e 58 52 55 Refer to Plant Testing Procedure No. 33. Wet mix snail be plastic and buttery working and free of grit or coarse particles. Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back. There shall be at most only a couple of verj small cracks in the wedge. White Dried compound shall not vary in color from preceding batches. EDO:dek A, -/ Denotes change in this reissue. SGP 0017147 July 9, 19/0 Supersedes Formula No. TEX-955 Dated 7/2/70 ACNE, TEXAS PLANT FORMULA ALL PURPOSE JOINT COMPOUND FORMULA NO. TEX-952 DESCRIPTION OF PRODUCT; - All Purpose compound for taping and finishing joints, spotting nailheads and texturing. / fon -A R" . ter ini Van aide Cel.^size Q? 100,000 Gc'-\~coi RS6219 Go.v.. G? 702 Asbestos 7RF-9 Mica P80-H Defoamer Mill Lane Plaster TEX-25 WG V,.: NG CONS ISTENCY: Specifications: WORKING PROPERTIES Specifications: BONDING PROPERTIES: Specifications: CRACK RESISTANCE: Specifications COLOR: Specifications: Function R.M.Spec. Percent Lbs/Batch Fungicide Water Retention aid Adhesive Adhesive Bulking agent Anti Cracking agent Anti Foaming agent Filler 126 170 162 161 9 11 196 - .05 .20 2.5 1.0 4.0 5.0 .1 87.15 100.00 1.0 4.0 50.0 20.0 80.0 100.0 2.0 1743.0 2000.0 - Refer to Plant Testing Procedure No. 32. Maximum Minimum Avera 58 52 55 Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles. Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back. There shall be at most only a coupl of very small cracks in the wedge. White Dried compound shall not vary in color from prec-eding batches. EDO:dek Denotes change in this reissue. SGP 0017148 September 1, 1970 Supersedes Formula No. TEX-952 Dated 7/9/70 ACME. TEXAS PLANT FORMULA ALL PURPOSE JOINT COMPOUND FORMULA NO. TEX-952 3Z- DESCRIPTION OF PRODUCT: - All Purpose compound for taping and finishing joints, spotting nailheads and texturing. / FORMULA: Raw Material Vanicide Cellosize QP 100,000 Gelvatol RS-6219 Gelva GP 702 Asbestos 7RF-9 Mica P8)-H Trufumuur Mill M#l c o Land Plaster TEX-25 Function R.M.Soec. Fungicide Water Retention aid Adhesive Adhesive Bulking agent Anti Cracking agent Anti Foaming agent Filler 126 170 162 161 9 11 196 Percent Lbs/Batch .05 .30 2.00 1.00 5.00 5.00 .10 86.55 100.00 1.0 6.0 40.0 20.0' 100.0 100.0 2.0 1731.0 2000.0 -t *& 2.0 /d.O 70.0 .2, / 73./ WORKING CONSISTENCY: Specifications: Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 58 52 55 WORKING PROPERTIES: Specifications: Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles. BONDINC PROPERTIES: Specifications: Refer to Plant Testing Procedure No. 35. After compound has dried, tape ahall delaminate when peeled back. CRACK RESISTANCE: There shall be at most only a couple of very small cracks in the wedge. COLOR: Spec ifications: White Dried compound shall not vary in color from preceding batches. -/ Denotes change in this reissue. T?T%A A aV SGP 0017149 June 30, 1971 Supersedes Formula No. TEX-952 Dated 9/1/70 ACME, TEXAS PLANT FORMULA ALL PURPOSE JOINT COMPOUND FORMULA NO. TEX-952^; 3-27-7/ /So. 3 3 DESCRIPTION OF PRODUCT: - All Purpose compound for taping and finishing joints, spotting nailheads and texturing. -/ FORMULA: Raw Material Func tion R.M.Spec. Percent Lbs/Batch Gendriv 492S Vanicide 51Z Gelvatol 6278C Gelva GP702 Asbestos 7RF9 Mica p80-H Defoamer Ml 17 Land Plaster TEX-25 Thickner Fungicide Adhesive Adhesive Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Filler 223 126 126 161 9 11 - ' 0.30 0.05 2.00 1.00 7.00 5.00 0.10 84.55 100.00 6.00 1.00 40.00 20.00 140.00 100.00 2.00 1691.00 2000.00 /X 3 y'a o />O tZ -/ WORKING CONSISTENCY: Specifications: WORKING PROPERTIES: Specifications BONDING PROPERTIES: Specifications CRACK RESISTANCE: COLOR: Specifications Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles. Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back. There shall be at most only a couple of very small cracks in the wedge. White Dried compound shall not vary in color from preceding batches. -/ Denotes change in this reissue. EDO:dek SGP 0017150 November 17, 1971 Supersedes Formula No. TEX-952 Dated 6/30/71 I ACME, TEXAS PLANT FORMULA ALL PURPOSE JOINT COMPOUND FORMULA NO. TEX-952 //' ^' d DESCRIPTION OF PRODUCT: - All Purpose compound for taping and finishing joints, spotting nailheads and texturing. FORMULA: Raw Material Func tion R.M.Spec. Percent Lbs/Batch Gendriv 492S Vanicide 51Z Gelvatol 6278C Gelva GP702 Asbestos 7RF9 Mica p80-H Defoamer M117 Land Plaster TEX-25 Thickner Fungicide Adhesive Adhesive Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Filler 223 126 126 161 *9 11 - 0.30 0.05 1.75 1.00 7.00 5.00 0.10 84.80 100.00 6.00 14- 1.00 4- 35.00 /4o 20.00 140.00 4<cO 100.00 4oo 2.00 X` 1696.00^.78^ 2000.00 Xooo WORKING CONSISTENCY: Specifications: WORKING PROPERTIES: Specifications BONDING PROPERTIES: Specifications CRACK RESISTANCE: COLOR: Specifications Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles. Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back. There shall be at most only a couple of very small cracks in the wedge. White Dried compound shall not vary in color from preceding batches. -/ Denotes change in this reissue. ED0:dek SGP 0017151 April 14, 1972 Supersedes Formula No. TEX-952 Dated 11/17/71 ACME, TEXAS PLANT FORMULA ALL PURPOSE JOINT COMPOUND FORMULA NO. TEX-952 DESCRIPTION OF PRODUCT: MULA: Raw Material Gendriv 492S Vanicide 51Z oelvatol 6278C Gelva GP702 Asbestos 7RF9 Mica p80-H Dcfoamer M117 Land Plaster TEX-25 - All Purpose compound for taping and finishing joints, spotting nailheads and texturing. Function Thickner Fungicide Adhesive Adhesive Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Filler R.M.Spec. Percent Lbs/Batch 223 0.30 24.00 126 0.05 4.00 126 1.75 10.00 161 1.00 SO.CO 9 7.00 560.00 11 5.00 400.00 - 0.10 8. GO - 84.80 <!7S4.CC 100.00 8000.00 DORKING CONSISTENCY:' Specifications: WORKING PROPERTIES: Specifications BONDING PROPERTIES: Specifications CRACK RESISTANCE: COLOR: Specifications - Refer to Plant Testing Procedure-No. 32. Maximum Minimum Aversce 62 58 Ou Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic ar.d buttery working and free of grit or coarse particles. Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back. There shall be at most only a couple of very small cracks in the wedge. White Dried compound shall not vary in color from preceding batches. \ -/ Denotes change in this reissue. EDO:dek SGP 0017152 SGP 0017143