Document gX4q0vwB4gg0R6yM6GR3edxG

IXiiW 1'C .Ulvrt January 10, 1969 (Projected) TEX -973 ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-971 (HAND TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT PLAINTIFF'S EXHIBIT GP-1248 - White Ready Mix Join t Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA: Raw Material Function R.M. Spec. Percent #/Batch Water Filler S-972 Polyvinyl Acetate Emulsion Benzoflex - Solvent Bulking agent Adhesive Plasticizer - 185 183 436.3 (52 , 91.66% 700.0 7.86% 0.48% 100.00% 60.0 3.7 1200.0 ** * Approximately 56.5 lbs./ 100 lbs. of active ingredients (this may vary + 2 gallons per batch). ** One batch yields 18(+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. WORKING CONSISTENCY - Refer to IJlant Testing Procedure No. 32 Specifications: - 1^ paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust. Brabender Viscosity: 580+20. WORKING PROPERTIES: Refer to Plant Testing Procedure No.33. SPECIFICATIONS: Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES: Refer to Plant Testing Procedure No. 35. SPECIFICATIONS: After compound has dried, tape shall show at Least. 75% fiber tear when delaminated. ' CRACK RESISTANCE: Refer to Plant Testing Procedure No. 37. SPECIFICATIONS: COLOR: There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. * White SPECIFICATIONS: Dried compound shall match color df standard sample. EDO'N:kgc SGP 0017593 SGp 0017594 March 31, 1972 Acme No. TEX-973 NEW ACME. TEXAS PLANT FORMULA "A READY MIX FILLER TEX-973 (FILLER "X"! DESCRIPTION OF PRODUCT: FORMULA Raw Material Asbestos 7RF09 Dowicil 100 Polyvinyl Alcohol Methocel 228 Mica Asbestos (SG-210) Land Plaster , WORKING CONSISTENCY: Specifications: WORKING PROPERTIES: Specifications COLOR: Specifications Filler for Ready Mix Joint Compound TEX-974 and TEX-975. Function R.M. Spec. Percent Lbs/Batch Bulking agent Fungicide , Adhesive JijUottsfof 2o - 30 Water retention aid Anti-cracking agent Bulking agent Filler 193 193 162 11 13 4.25 .15 .60 .50 7.00 1.75 -65-25 100.00 212.50 4-JtS.oc? 7.50 15,oO . 30.00 bO.oO ; 25.00 5o.oo 350.00 7 00.00. 87.50 / 75.00 4287 .50 flS7S.0O\ 5000-.-00 /Ojooo.oo Refer to Plant Testing Procedure No. 32. Maximum Minimum Average o iJ se : Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particle,s. WhiteDried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No TEX-974 at least twice a day or with every 6th or 7th batch of filler tnant facCured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-974. EDO:el-z / - 4-~ 7 A 1 yt 3/. 7.-S 4 ? 7 P * JO. / 4-- c/ SGP 0017595 c/ ^ 3 Ca-u ^ April 14, 1972 Supersedes TEX-973 Dated 3/31/72 ACME, TEXAS PLANT FORMULA READY MIX FILLER TEX-973 (FILLER "X1^ DESCRIPTION OF PRODUCT: FORMULA Raw Material Asbestos 7RF09 Dowicil 100 Polyvinyl Alcohol Methocel 228 Mica Asbestos (SG-210) Land Plaster WORKING CONSISTENCY: . Specifications: WORKING PROPERTIES: Specifications COLOR: Specifications - Filler for Ready Mix Joint Compound TEX- 974 and TEX-975. Function R.M. Spec. Percent Lbs/Batch Bulking agent Fungicide Adhesive Water retention aid Anti-pracking agent Bulking agent Filler 193 193 162 11 13 4.25 .15 .60 .50 7.00 1.75 -1Lu25 340.00 12.00 48.00 40.00 560.00 140.00 6860.00- 100.00 8000.00 - Refer to Plant Testing Procedure No. 32.i Maximum Minimum Average 62 58 60 Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. White Dried compound shall match color of standard sample NOTE: A wet mix of the filler shall be prepared according to Fo: mula No. TEX-971 at leSt twice a day or with every 6th or 7th batch of filler manu factured. This prepared mix shall be tested and shall mef; all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. 'EDO:el*z X SGP 0017596 May 17, 1972 Supersedes Formula TEX-973 Dated A/14/72 ACME, TEXAS PLANT FORMULA READY MIX FILLER TEX-973 (FILLER "X") DESCRIPTION OF PRODUCT: - Filler for Ready Mix Joint Compound TEX-974 and TEX-975. FORMULA Raw Material Function R.M. Spec. Percent Lbs/Batch Asbestos 7RF09 Dowicil 100 ,,, Polyvinyl Alcohol Gendriv 492S Mica Asbestos (SG-210) Land Plaster Bulking agent .Fungicide Adhesive .. Water retention aid Anti-cracking agent Bulking agent Filler 193 193 162 11 13 4.25 .15 .60 .50 7.00 1.75 85 -7.5 340.00 12.00 48.00 40.00 560.00 140.00 6860.00- '' 100.00 . 8000.00 WORKING CONSISTENCY: Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES: Specifications Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: Specifications White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula No. TEX-971 at least twice a day or with every 6th or 7th batch of filler manufac :ured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. WNGidek SGP 0017597 April 12, 1973 Formula TEX-973 NEW ACME, TEXAS, PLANT FORMULA READY MIX JOINT COMPOUND. NO. TEX-973 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. To be supplied to Houston only. FORMULA Raw Material Nalco 71-D5 Water Filler TEX-977 Function RM Spec Percent Lbs/Batch Anti-foaming agent Solvent 0.1 - 99.9 2.0 972.0 (117 ; 1800.0 100.00 2774.0 one 4-gallon carton or 45 + one 5-gallon pail. WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. - If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust. Brabender Viscosity - 520 + 20 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. - Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed par ticles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications CRACK RESISTANCE COLOR Specifications Refer to Plant Testing Pi ocedure No. 35 After compound has dried, tape shall show at least 75% fiber tear when delaminated. - Refer to Plant Testing Procedure No. 37 There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. - White - Dried compound shall match color of standard sample. WNGtelz SGP 0017598 March 7, 1974 New Formula TEX 973 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX - 973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977. FORMULA Raw Material Asbestos SG210 Gendriv 492S Dowicil 75 Asbestos.7RF9 Mica p80-H Land Plaster TEX-25 T. P. Blend Talc Function RM Soec .Fiber Filler 13 Thickener 223 Fungicide 193 Fiber Filler 9 Anti-cracking agent 11 Filler - Slip Agent Percent 1.00 .50 .20 5.00 4.00 74.30 15.00 100.00 Lbs/Batch 80.0 40.0 16.0 400.0 320.0 5944.0 1200.0 8000.0 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32 Maximum Minimum Average 62 58 60 ' WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33 - Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications - White - Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day cr with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No TEX-977. WNG:vim SGP 0017599 February 27 1975 Supersedes Formula TEX-973 Dated 3/7/74 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX - 973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977. -/FORMULA Raw Material Vancide Gendriv 492S Dowicil 75 Asbestos 7RF9 Mica p60-H Land Plaster TEX-25 T. P. Blend Talc WORKING CONSISTENCY Specifications: Function RM Spec Percent Lbs/Batch Preservative Thickener Preservative Fiber Filler Anti-cracking agent Filler Slip agent 126 223 193 9 11 .i --I :o25 .50 .175 5.00 7.50 76.60 10.00 2.0 40.0 14.0 400.0 600.0 6144.0 600.0 1 100.00 6000.0 t V - Refer to Plant Testing Procedure No. 32. Maximum Minimum ^ Average 62 56 ; \ 60 WORKING PROPERTIES Specifications: Refer to Plant Testing Prbcediire No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shaljl be free of any coarse gritty or undispersed particles. COLOR Specifications: White ' Dried compound shall match color of standard sample. ; NOTE: A wet mix of the filler shall be prepared according to Formula TF.X-977 at least twice a dav or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. WNG:jg -/ denotes change SGP 0017600 May 27, 1975 Supersedes Formula TEX-973 Dated 2/27/75 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX - 973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977. -/FORMULA Raw Material Vancide Gendriv 492S Dowicil 75 Asbestos 7RF-02 Mica p60-H Land Plaster TEX-25 T. P. Blend Talc Function RM Spec Preservative Thickener Preservative Fiber Filler Anti-cracking agent Filler Slip agent 126 223 193 9 11 -- 2 Percent .025 .50 .175 3.25 7.50 76.55 10.00 100.00 Lbs/Batch 2.0 40.0 14.0 260.0 600.0 6264.0 600.0 6000.0 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average WORKING PROPERTIES Specifications: 62 56 60 - Refer to Plant Testing Procedure No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE; A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a dav or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. -/ *Asbestos 7RF9 may be substituted. Use at a loading of 5$ (400 lbs/batch) -/ denotes change WNG:elz SGP 0017601 September 11, 197$ Supersedes Formula TEX-973 Dated 5/27/75 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX - 973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977. -/FORMULA Raw Material Vancide Gendriv 492S Dowicil 75 Asbestos Sg-210 Mica pSO-H Land Plaster TEX-25T. P. Blend Talc Function RM Spec Preservative Thickener Preservative Fiber Filler Anti-cracking agent /Filler : Slip agent 126 223 193 13' 11 -- 2 Percent .025 .50 .175 3.25 7.50 76.55 10.00 100.00 Lbs/Batch 2.0 40.0 14.0 260.0 600.0 6264.0-r 600.0^ 6000.0 WORKING CONSISTENCY / - Refer to Plant Testing Procedure No. 32. Specifications: / Maximum Minimum Average / 62 56 60 WORKING PROPERTIES / - Refer to Plant Testing Procedure No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A wet mix of tie filler shall be prepared according to Formula TEX-977 at lea, t twice a dav or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. -/ denotes change WNG: gvp SGP 0017602 April 22, 1976 Supersedes Formula TEX-973 Dated 9/11/75 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX - 973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977* FORMULA Raw Material Vancide / Galactosol 413-W Dowicil 75 Asbestos Sg-210 Mica p80-H Land Plaster TEX-25 T. P. Blend Talc Function RM Spec Preservative Thickener Preservative Fiber Filler Anti-cracking agent Filler Slip agent 126 193 13 11 -- 2 Percent .025 .50 *175 3*25 "7.50 78.55 10.00 100.00 Lbs/Batch 2.0 40.0 14.0 260.0 600.0 6264.0 800.0 8000.0 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a dav or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. -/ denotes change WNG: gvp SGP 0017603 Aprtl-227 1976 Supersedes Formula TEX-973 Dated 73"' H/l 'i/?(>> ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX - 973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977. FORMULA Raw Material Function RM Spe c Percent Lbs/Batch Vancide- Preservative Galactosol 413-W Thickener Dowic il-- 7 5 TE * f~> P,J* 1? ^preservative Asbestos SG-210 Fiber Filler Mica p30-H Anti-cracking agent Land Plaster TEX-25 Filler T. P. Blend Talc Slip agent -- rQ25- 2-rO- .50 40.0 Z&r a-?5- lirrO- C 13 3.25 260.0 11 7.50 600.0 -- C. 6593-^55" 623irrtf 2 2 1C. 00-- 300.0 100.00 3000.0 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 53 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33 Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A *et mix of the filler shall be prepared accor..ing to Formula TEX-977 at least twice a dav or with every sixt1 or seventh batch of filler manufactured. This prepared mi . shall be te ;ted and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977* -/ denotes change WNG: gvp SGP 0017604 November 24, 1976 Supersedes Formula TEX-973 Dated: 4/22/76 ACME, TEXAS PLANT FORMULA READY MIX FILLER TEX-973 DESCRIPTION OF PRODUCT - Filler for Ready Mix Topping Compound TEX-977. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Galactosol 413-W / Troysan PMA-10 SEP Asbestos SG-210 Mica p80-H / Land Plaster T.P. Blend Talc Thickener Preservative Fiber Filler Anti-cracking agent Filler Slip agent 13 11 - 2 .50 .10 3.25 7.50 78.65 10.00 40.0 8.0 260.0 600.0 6292.0 800.0 100.00 8000.0 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications: White Dried compound shall match color of standard sample. NOTE: A v?; mix of the filler shall be prepared according lo Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the spejifications required of Ready Mix Joint Compound - Formula TEX-977. WNG/gvp -/ denotes change SGP 0017605 May 19, 1977 Ready Mix Topping Formula TEX-973 NEW ACME, TEXAS , PLANT. FORMULA READY MIX TOPPING COMPOUND NO. TEX - 973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. FORMULA Function RM Spec Percent Lbs/Batch Nalco 71-D5 Water Elvace EP-200 Filler TEX-970 Anti-foaming agentb Solvent Adhesive t 125 0.1 -- 185 2.0 - 97.9 100.0 2.00 1228.00 40.00 1958.00 (148 (4.5 gal.) gal.) 3228.00 One batch yields 64'+ one 4 gallon carton or 52 + one 5 gallon pail. WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity 520 + 20 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated. CRACK RESISTANCE COLOR Specifications Refer to Plant Testing Procedur ; No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge. White . 1. Dried compound shall match color of standard sample. WNG:jr SGP 0017606 September 15, 1977 Supersedes Topping Formula TEX-973 Dated May 19, 1977 ACME, TEXAS, PLANT FORMULA READY MIX TOPPING COMPOUND NO. TEX - 973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. FORMULA /'Dowicil Nalco 71-D5 / Water Elvace EP-200 / Filler TEX-970 Function Preservative Anti-foaming agentb Solvent Adhesive RM Spec 125 185 - ,, Percent .35 0.1 2.0 97.55 Lbs/Batch 7.00 2.00 847.00<102 gal.) 40;00 (4.5 gal.) 1958.00 100.0 2854.00 One batch yields 64+ one 4 gallon carton or 52 + one 5 gallon pail. WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity 520 + 20 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications Refer to Plant Testing Procedure No. 35. After compound has dr'.ed, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge. COLOR Specifications White Dried compound shall match color of standard sample. -/ denotes change WNG:jr SGP 0017607 October 26 1977 Supersedes Topping Formula TEX-973 Dated September 15, 1977 ACME, TEXAS, PLANT FORMULA READY MIX TOPPING COMPOUND NO. TEX - 973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. FORMULA / Proxcel CRL Nalco 71-D5 Water Elvace EP-200 / Filler TEX-970 Function Preservative Anti-foaming agentb Solvent Adhesive -- RM Spec 125 - 185 - Percent .115 0.1 - 2.0 97.785 Lbs/Batch 2.23 2.00 847.00 fl02 40.00 (4.5 1962.77 100.0 2854.00 One batch yields 64 + one 4 gallon carton or 52 + one 5 gallon pail. WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity - 520 + 20 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge. COLOR Specifications White Dried compound shall match color of standard sample. -/ denotes change HCF: jr SGP 0017608 January 17, 1978 Supersedes Topping Formula TEX-973 Dated: 10-26-77 ACME, TEXAS, PLANT FORMULA READY MIX TOPPING COMPOUND NO. TEX - 973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. FORMULA Proxcel CRL Nalco 71-D5 Water Elvace EP-200 / Filler TEX-976 / Acrysol-ASE-60 Function Preservative Anti-foaming agentb Solvent Adhesive -- Thickener RM Spec 125 - 185 - 147 Percent .115 0.1 - 2.0 97.585 .20 100.0 Lbs/Batch 2.23 2.00 847.00 Q02 ,gal.) 100.00 (LI. 73 1962.77 4.00 2918.00 One batch yields 64 + one 4 gallon carton or 52 + one 5 gallon pail WORKING CONSISTENCY Specifications Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity 460 20 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge. COLOR Specifications White Dried compound shall match color of standard sample. -/ denotes change HCF: jr SGP 0017609 February IS, 1978 Supersedes Topping Formula TEX-973 Dated: 1-17-77 ACME, TEXAS, PLANT FORMULA READY MIX TOPPING COMPOUND NO. TEX - 973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. FORMULA Proxcel CRL Nalco 71-D5 Water Elvace EP-200 Filler TEX-976 Acrysol-ASE-60 Function Preservative Anti-foaming agentb Solvent Adhesive -- Thickener RM Spec 125 - 185 - 147 Percent .115 0.1 - 3.0 96.585 .20 100.0 Lbs/Batch 2.32 2.00 847.00 Q02 61.00 (7.0 1950.00 4.00 2536732 One batch yields 64 + one 4 gallon carton or 52 + one 5 gallon pail. WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32 If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity - 460 20 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE lefer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge. COLOR Specifications White Drisd compound shall match color of standard sample. -/ denotes change HCF:jr SGP 0017610 May 2, 1978 Supersedes Topping Formula TEX-973 Dated : 2/15/78 ACME, TEXAS, PLANT FORMULA READY MIX TOPPING COMPOUND NO. TEX - 973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallon pails. FORMULA Proxcel CRL -/Nalco 71-D5 . " -/Water -/Elvace EP-200 / Filler TEX-976 / Acrysol-ASE-60 Function Preservative Anti-foaming agent Solvent Adhesive -- Thickener RM Spec 125 - 185 - 147 Percent .115 .099 - 3.024 96.fc63 .099 100.0 - Lbs/Batch 2.32 2.00 886.68 (107 61.00 (7.0 1950.00 2.00 29J4.00 One batch yields 64 + one 4 gallon carton or 52 + one 5 gallon pail. WORKING CONSISTENCY Specifications - Refer t.o Plant Testing Procedure No. 32. If paste is not of proper working `consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity - 46Q + 20 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specifications Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE - Refer to Plant Testing Procedure No. 37. There shall be no large fissure cr'acks in the wedge and no cracks in the thinner half of the wedge. COLOR Specifications - White Dried compound shall match color of standard sample. -/ denotes change HCF:jr / SGP 0017611 / 1 I I December 13, 1978 Supersedes Topping Formula TEX-973 Dated: 5/2/78 ACME, TEXAS, PLANT FORMULA READY MIX TOPPING COMPOUND NO. TEX-973 DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing, filling corner beads and spotting nailheads. To be used in 4-gallon cartons and 5-gallor pails. FORMULA Function RM Spec Percent Lbs/Batch PMA-30 Nalco 71-D5 Water Elvace EP-200 Filler TEX-976 Acrysol-ASE-60 Preservative Anti-foaming agent Solvent Adhesive - Thickener .115 125 .099 -- 185 3.024 - 96.663 147 .099 2.32 2.00 1042.50 (125 gal.) 61.00 (7.0 gal.) 1950.00 2.00 100.000 3059.82 One batch yields 61 + one 4 gallon carton or 49 + 5 gallon pail. WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender Viscosity - 460 + 20 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES Specificat'ons - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 15% fiber tear when delaminated. CRACK RESISTANCE - Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge. COLOR Specifications - White Dried compound shall match color of standard sample. -/denotes change GWG:jr SGP 0017612 June 18, 1969 NEW FORMULA ACME, TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX-973 (HAND TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Function R.M. Spec. Percent Lbs./Batch Water s. Solvent 400.0 (48 gal Filler TEX-972 Bulking agent 91.66 700.0 Polyvinyl Acetate** Emulsion Adhesive 185 7.86 60.0 Benzoflex Y-5 Plasticizer 183 0.48 3.7 100.00 1163.7** * Approximately 52 lbs./lOO lbs. of active ingredients (this may vary + 2 gallons per b^tch). flt.63 ) ** One batch yieldA"tT"(+ 5/gallons) pails of Ready Mix Joint Compound at WORKING CONSISTENCY Specifications: Brabender Viscosity; WORKING PROPERTIES Specifications: BONDING PROPERTIES Specifications; CRACK RESISTANCE Specifications COLOR Specifications Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust. lo 580 +r Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. Refer'to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. Refer to Plant Testing Procedure No. 37,. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. White Dried compound shall match color of standard sample. EDO:dek 4,- 43 SGP 0017613 SGP 0017592