Document evp5Y2YQDBm0N7x9BZ8DmEY6y

* ' -MYl / mmco Model 6000 Model 6000 is a powerful, versatile, easily operated heavy duly Laihe that turns large truck drums, resurfaces rotors and machines llywheelsand clutch plates. Each side ol the Laihe has its own electri cally driven Cross Slide lor drum machin ing and Saddle lor lace cuts on roiors, fly wheels and clutch plates. Speed and feed direction ol each ol the two Cross Slides and Saddles is controlled Irom the Lathe's Control Panel. Dual Cross Slides permit simultaneous rough and finish cuts on a drum, or wilh a Boring Bar mounted on one side and a Grinder on the other. A drum can be machined and ground at the same lime. Drum turning and lace cutting gearboxes can be engaged or disen gaged at any teed speed without danger to the units. Positive locks maintain constant depth ol cul at predetermined settings. Features Heavy duty construction lor long ser vice tile. 4.1339' 1105 mm) dia. Spindle turns in permanently lubricated ball bearings. \ Driven by Cogged Timing Belts lor high > operating efficiency. Dual Cross Slides and Saddles mounted on dovetail ways with adjust able Gibs lor lifetime precision. Cross Slides and Saddles driven by individual high toique Gearboxes powered by electric motors. Handwheel on each Geaibox lor last movement. Depth ot cul scales cali brated in English and metric All Lathe movement through precision Lead Screws. Mechanical and electrical safeguards ) limit Cross Slide and Saddle travel in both directions. Model 6002 Lathe Model 6002 is identical to. and has all the features ol. the Model 6000 except that it has only one Cross Slide and Saddle which is mounted on the right side ol the Lathe. A tool and accessory tray is mounted on the left side ol the machine. A CrossShde and Saddle assembly may be added to a Model 6002 already in the Held should dual capability be desired. Stan dard equipment wilh Model 6002 is the \ t same as Model 6000. ihip. Wt 1400 lbs (635 kq) *Y Simple, Easily Operated :% Controls Alt powered (unctions--Spindle speed. Cross Slide and Saddle speed and (eed direction--are controlled from this conve nient Control Panel on Model 6000 and 6002 Lathes. Note that each control is logically arranged according to function: Main Power and Spindle Speed in the center with Right and Lelt Feed Direction and Feed Speed controls on either side Four positions ol Feed Direction switch es correspond wilh the movement controlled--Drum Turn Out-Drum Turn In positions control lorward or return move ment ol the Cross Slide on which the Lathe's Boring Bar is mounted. Face Cut tn/Face Cut Out positions move the Sad dle toward rotors, flywheels or clutch plates. Switches at the bottom control Spindle speed and right and left side Gearbox teed speeds. An Overload Safe ty Breaker Switch on the panel automati cally cuts power supply when the main Spindle Drive Motor is overloaded or mal function occurs in the Lathe s electrical circuits. 61 NOVO120366 fV'-; -\J: