Document eqQaMBrB157QawgJ8n18jwxm
(conoco)
Interoffice Communication
To Distribution
Prom
Tom Grumbles
aw September 8, 1981
sublet HDPE MATERIAL SAFETY DATA SHEETS
Enclosed are the final drafts for the HDPE Material Safety Data Sheets. These sheets will have the Conoco Chemicals product name, plant address and telephone numbers added when they are available.
Very few changes were made on the first draft of the sheets. Please return any further comments you may have to me by September 28.
Thomas G. Grumbles
Distribution:
Ken Mievre - PC Bill Groves - PC Dr. Massad - PC Larry Hubbard - Houston Bill Broddle -'PC Dr. Whetstone - PC Tom Williams - Houston Michele Malloy - Houston Susan Litzau - Houston.
TIRAFT
MATERIAL SAFETY DATA SHEET
Conoco Chemicals 5 Greenway Plaza East P.O. Box 2197 Houston, Texas 77001
PRDDUi<^ID&h^iliAflDH^^T^
MANUFACTURER'S NAME Conoco Chemicals
ADDRESS p 0 Box 2J97 . Houston, TX 77001.
TRADENAME Conoco 1150
SYNONYMS
High Density Polyethylene
REGULAR TELEPHONE NO. EMERGENCY TELEPHONE NO.
HAZARDOUSINGREDIENTST'
BOILING POINT {F.} .VAPOR PRESURE(fimrH5'4 VAPOR DENSITY (AIR =- TV SOLUBILITY IN WATER
N/A N/A N/A N/A
SPECIFIC GRAVITY (HJ1 = D
PERCENT VCLATILEBT VOLUME (%> EVAPORATION RATE
f = ir
MELTING POINT
APPEARANCE AND ODOR
Translucent Odorless Pellets
MV mffEMT. I,l.cu.lm,-
h--agSBSaai I I 111 Fill
Tin '-."u.
a): i =?>k11 r4 z'A u a i li mi ; a t f \} i-
FLASH POINT (TEST METHOD)
N/A
AUTOIGNmON TEMPERATURE
N/A
0.957q/cm^ N/A N/A 133 C
w.yj.^agsas8saa
EXTINGUISHING MEDIA
SPECIAL FIRE FIGHTING PROCEDURES
UNUSUAL FIRE AND EXPLOSION
Water spray on dry chemical (Ammonium Phosphate Base)
Cool exposed resins with water spray to prevent melting and dripping. Incomplete combustion can lead to formation of carbon monoxide^irritating fumes and smoke. Self-contained breathing apparatus should be
CCR 000001838
HEflLmHAZnHEINFORMATION:
FIRST AID EYES:
if dust enters the eye, flush with large amounts of water.
skin:
N/A
INHALATION:
N/A
INGESTION: Seek Medical Aid
NATURE OF HAZARD PTES: This material is not expected to present a hazard to the eyes. ,, This material is not expected to present a hazard to the intact skin. sw": Molten resins will produce thermal burns.
INHALATION: This material is not expected to present an inhalation hazard under normal use.
This material is not expected to present an ingestion hazard.
INGESTION:
EFFECTS OF OVEREXPOSURE:
ACUTE OVEREXPOSURE: CHRONIC OVEREXPOSURE:
No adverse health effects are expectea to o'ccur witn
exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylene.
THRESHOLD UNIIT VALUE (TLV) ACGIH: 10 mg/m^ nuisance dust
TOXICITY DATA SX1N CONTACT: N/A
EYEtONTACT: N/A
INHALATION:
N/A
INGESTION:
N/A
CCR 000001839
vr ' V ; - ^
:
CONDITIONS CONTRIBUTING TO INSTABILITY
HEACiwirroimc^
INCOMPATIBILITY
Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZAROOUS DECOMPOSITION PRODUCTS Burning or heating to high**-temperatures weight composition products.
may
release
irritating
low molecular
CONOmONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION Will not occur.-
SITIEOfflBHCPHaCEnUffiS^r-^'
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHWICALS N / A
WASTE DISPOSAL METHQO May be disposed of in landfill regulations.
in accordance with local,
state or federal
VENTILATION REQUIREMENTS General ventilation for thermal processing and nuisance
dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFY in DETAIL):
if dust is produced during handling of material an approved air-purifying respirator snould be used.
EYE: Standard safety glasses or chemical goggles.
*
* GLOVES: General ly not required unless handling hot or molten resins.
OTHER CLOTHING AND EQUIPMENT: N/A
CCR 000001840
L- .-r:HAZARD:CIASSIRCjSJIQW INFORMATION
!MC0 HAZARD CLASS AMD NUMBS
N/A
US DOT CLASSIFICATION
N/A
UN NUMBER
M/A
EEC DANGEROUS SUBSTANCE CLASSIFICATION
ADR CLASS NUMBER
ea: special risks ano safety advice
- CAS NUMBER 9002-88-4
:o USUAL SHIPPING CONTAINERS
^v TRANSPQEnflTIQN AND: STORAGE
ELECTROSTATIC ACCUMULATION HAZARD
STORAGETRANSPQRT pressure
STORAGE TRANSPORT TEMPERATURE
loading/unloading temperature
-
;
VISCOSITY AT LOAOING/UNLOAD1NG TEMPERATURE
' ` : " HANDLJNG. AND STORAGE MATERIALS AND. COATINGS
suitable
UNSUITABLE
The acove aata is oased on testa ana exoenence whten Conoco oeiieves reiiaeie ana are suooited for informational ourcoses onty. Conoco disclaims any iiaoiiity for carnage or injury wnicn results hum tne use of the aoove aata ana nothing contained therein snail consorute a guar* antes. WARRANTY OF MERCHANTABILITY. or reoresentaoon (inducing freedom from patent Iiaoiiity) Oy Conoco with resoect to the caia. tne prooucr oescnoea. or tneir use for any soecfrc purpose. even if tnat ouroose is known to Conoco.
CCR 000001841
DRAFT
MATERIAL SAFETY DATA SHEET
Conoco Chemicals 5 Greenway Plaza East P.O. Box 2197 Houston, Texas 77001
PRODUC^IDEKIIFICAnOKi
NAME Conoco Chemicals
REGULAR TELEPHONE NO. EMERGENCY TELEPHONE NO.
ADDRESS P, 0. Box 2197 - Houston, TX 77001
TRADE NAME Conoco 1*070
SYNONYMS
High Density Polyethylene
.V *
hazahoousinghedient^; 7 ^
r^
MATERIALOR:COMPONENT
|
HAZARD:DAW
:
L_ _ _ _ _ _ _ _ _ _ _ _ _
-I
B0IUNG POINT ("F.J VAPOR -PRE5URE (mnr H*} VAPOR DENSITY (AIR t)-
SOLUBILITY IN WATER APPEARANCE AND ODOR
N/A N/A N/A N/A
. SPECIFIC GRAVITY (HJL = 1)
PERCENTVQLATILE-
BY VOLUME (%)
EVAPORATION RATE
( -=1)
MELTING POINT
Translucent Odorless Pellets
0.953g/cm3
N/A N/A 132 C
i ivnm.'diMT-*
FLASH POINT (TEST METHOD)
N/A
AUTDIGNIT10N TEMPERATURE
N/A
FLAMMABLE LIMITS IN AIR. % BY VOL
LOWER
N/A
UPPER
N/A
EXTINGUISHING MEDIA
Water spray on dry chemical (Ammonium Phosphate Base)
SPECIAL RRE FiGHTING PROCEDURES
UNUSUAL HRE AND EXPLOSION
Cool exposed resins with water spray to prevent melting and dripping.
Incomplete combustion can lead to formation of carbon monoxideyirri
tating fumes and smoke. Self-contained breathing apparatus should be
wui n \1 enLei i iru luii f i ned space.
1
0000019A2 CCR
FIRST AID
EYES:
HEALTHHAZARIIINFORMATION:
If dust enters the eye, flush with large amounts of water.
SKIN:
N/A
f
INHALATION: N/A
INGESTION:
Seek Medical Aid
MATURE OF HAZARD
EYES: This material is not expected to present a hazard to the eyes.
skin- This mater'*a^ is not expected to present a hazard to the intact skin. 5WN* Molten resins will produce thermal bums.
INHALATION: This material is not expected to present an inhalation hazard under normal use.
This material is not expected to present an ingestion hazard.
INGESTION:
EFFECTS OF OVEREXPOSURE: ACUTE OVEREXPOSURE: CHRONIC OVEREXPOSURE:
No adverse health effects are expected to occur witn exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylene.
THRESHOLD LIMIT VALUE (TLV) ACGIH: 10 mg/m nuisance dust
TOXICITY DATA
SKIN CONTACT:
N/A
EYEtONTACT:
N/A
INHALATION:
N/A
INGESTION:
N/A
1w
CCR 00000X843
I CONDITIONS CONTRIBUTING TO INSTABILITY
INCOMPATIBILITY
Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZARDOUS DECOMPOSITION PRODUCTS
Burning or heating to high'-temperatures may release irritating low molecular weight composition products.
CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION
Wi11 not occur.
SPILLOffLEfllCPHQCEnUREStC-- '
STEPS TO BE TAKEN IP MATERIAL IS RELEASED OR SPILLED
Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD
May be disposed of in landfill in accordance with local, state or federal regulations.
AiiiiliOI
VENTILATION REQUIREMENTS
General ventilation for thermal processing and nuisance
dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFY in DETAIL): If dust is produced during handling of material an
approved air-purifying respirator should be used. EYE: Standard safety glasses or chemical goggles.
GLOVES:Generally not required unless handling hot or molten resins.
OTHER CLOTHING AND EQUIPMENT: N/A
CCR 0000Q184-4
^ :;.r i:'"HAZARD:CtASSIRCATIO^INFQRMATTQMi
IMCS HAZARD CUSS ANO NUMB
N/A
US OOT CLASSIFICATION
N/A
UN NUMB
N/A
EEC DANGEROUS SUBSTANCE CLASSIFICATION
>
ADR CUSS NUMB
EEC SPECIAL RISKS ANO SAFETY ADVICE
-
CAS NUMB
9002-88-4
: ;v:/. -
USUAL SHIPPING CDNTAJNSS
-
STORAGE TRANSPORT TEMPERATURE
THAMSPQRTATlOft AND STORAGE
ELECTROSTATIC ACCUMULATION HAZARD STDRAGE/TRANSPORT PRESSURE
LOAQING/UNLOAOING TEMPERATURE
v ;: .
VISCOSITY AT LOAQING/UNLOAOING TEMPERATURE
'::
handling and storage materials and coatings.
SUITABLE
UNSUITABLE
The acove caca is cum on tests arte exoenence which Conoco oe+ieves reiiac*e ano are succeed for informationaJ ourooses only. Conoco disclaims any (iaoi(y for 2amage or tntury whien results from me use of me above cata ano nothing contained therein snail constitute a guar antee. WARRANTY OF MERCHANTABILITY, or reoresentaoen (inducing freeoom from oatenc liaoiiiry) Oy Conoco with resoeci to the cats, me sroouc: oesenbed. or metr use for any soeerne ourpoae. even if mat guroose is known to Conoco-
*
CCR 000001845
DRAFT
MATERIAL SAFETY DATA SHEET
(conoco)
Conoco Chemicals 5 Greenway Plaza East P.O. Box 2197 Houston, Texas 77001
PHDDUCTIDENTlFICflTIOMLr-.;
MANUFACTURER'S NAME Conoco Chemicals
REGULAR TELEPHONE NO. EMERGENCY TELEPHONE NO.
ADDRESS P. 0. Box 2197 - Houston, TX 77001
TRADENAME Conoco DR 721
SYNONYMS
High Density Polyethylene
HAZARDOUS! INGREDIENTS'
BOILING POINT VAPOR PRESUREjmnc Hg:) VAPOR DENSITY (AIR 1), SOLUBILITY IN WATER
ODOR
N/A N/A N/A N/A
SPECIFIC GRAVITY (HJ1 =-1)
PERCENT VOLATILE BY VOLUME (%) EVAPORATION RATE
( *ty
MELTING POINT
0.964g/cm3
N/A N/A 136 C
:ent Odoi
si:! a1. s'1 m i w 111; a. t. u ^`sssaKaBlawgBBRSSBg
FUSH POINT (TEST METHOD)
N/A
AUT0IGNIT10N TEMPERATURE
N/A
FLAMMA8LE LIMITS IN AIR. % BY VOL
LOWER
N/A
UPPER
N/A
extinguishing: MEJIA
Water spray on dry chemical (Ammonium Phosphate Base)
SPECIAL RRE FIGHTING PROCEDURES
UNUSUAL FIRE AND EXPLOSION
Cool exposed resins with water spray to prevent melting and dripping. Incomplete combustion can lead to formation of carbon monoxide,irri tating fumes and smoke. Self-contained breathing apparatus should be WUl II if clllU! i ML LJI! f 1 llUli LpfiLE.
i CCR 000001 fl4h
FIRST AID
ETCS:
HEALmHflZflHfflNFOHIVIffnafC:
If dust enters the eye, flush with large amounts of water.
SKIN:
N/A
INHALATION: N/A
ingestion:
Seek Medical Aid
MATURE OF HAZARD
ETCS: This material is not expected to present a hazard to the eyes.
This material is not expected to present a hazard to the intact skin. ' Molten resins will produce thermal burns.
INHALATION: This material is not expected to present an inhalation hazard under normal use.
ingestion* This material is not expected to present an ingestion hazard.
EFFECTS OF OVEREXPOSURE: ACUTE OVEREXPOSURE: CHRONIC OVEREXPOSURE:
No adverse health"effects are expected to occur with exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylene.
THRESHOLD LIMIT VALUE (TLV) ACGIH: 10 mg/m3 nuisance dust
TOXICITY DATA SKIN CONTACT: N/A
EYEtONTACT: N/A
INHALATION:
N/A
INGESTION:
N/A
CCR 000001847
vr
CONDITIONS CONTRIBUTING TO INSTABILITY
REAcnvmrDAm-r
INCOMPATIBILITY Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZARDOUS DECOMPOSITION PROOUCTS Burning or heating to higfrVtemperatures weight composition products.
may
release
irritating
low molecular
CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION Will not occur. *
SPlLEOffLEBICPROCEDURE*^-
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD May be disposed of in landfill regulations.
in accordance with local,
state or federal
VENTILATION REQUIREMENTS
General ventilation for thermal processing and nuisance dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFY IN DETAIL):
If dust is produced during handling of material an approved air-purifying respirator should be used.
EYE: Standard safety glasses or chemical goggles.
GLOVES: General ly not required unless handling hot or molten resins.
OTHER CLOTHING AND EQUIPMENT: N/A
00 OOO
C.C*
41 y 3 H ft I a
IMCO HAZARD CLASS ANO NUMBS
N/A
UN NUMBS
M/A
HAZARD: CUSSlHCOTOff INFORMATION-
US DOT CLASSIFICATION
N/A
SC DANGEROUS SUBSTANCE CLASSIFICATION
ADR CLASS NUM8ER
SC SPECIAL RISKS ANO SAFrTf ADVICE
CAS NUMBS
9002-88-4
USUAL SHIPPING CONTAINERS
STORAGE TRANSPORT TEMPERATURE
TRANSPORTATION AND- STORAGE
ELECTROSTATIC ACCUMULATION HAZARD STORAGE/TRANSPORT PRESSURE
LOADtN&UNLOADiNG TEMPERATURE
VISCOSITY AT 10A0ING/UNL0AQING TEMPERATURE
HANDLING: AND STORAGE MATERIALS AND COATINGS
SUITABLE
UNSUITABLE
The acove data is cased on tests ana exoenence wnicn Conoco oeiieves reiiaoie and are succtied for informational ourocses only. Conoco disoaims any Iiaoiiity for camage or injury wnicn results from trie use of the aOove aata and notmng contained therein snail constitute a guar* ante*. WARRANTY Gf MEPCHANTA8IUTY. or representation (including freedom from oatent iiaoiiity) oy Conoco witn resoect to the cata. the product aescnoea. or their use tor any soeafic purpose, even if mat purpose is known to Conoco.
*
CCR 000001849
DRAFT
MATERIAL SAFETY DATA SHEET
Conoco Chemicals S Greenway Plaza East P.O. Box 2197 Houston, Texas 77001
MANUFACTURER'S NAME rConoco Chemica,ls
ADDRESS p c
TRADE NAME
Box 2197 - Houston, TX 77001 Conoco TO 10
SYNONYMS
High Density Polyethylene
REGULAR TELEPHONE NO. EMERGENCY TELEPHONE NO.
HAZAHDOUSINGREDienS^i:
BOILING-POINT (F.) VAPOR-PRESURE(mnrHg.) VAPOR DENSITY (AIR =* T) SOLUBILITY IN WATER APPEARANCE AND ODOR
N/A N/A
N/A N/A
SPECIFIC GRAVITY (HJ = 1)
nERCEMT VOLATILE BY V0tUME(%)
EVAPORATION RATE
{ - IV
METING POINT
Translucent Odorless Pellets
0.950g/cm^
N/A N/A 130 C
ll" "
FLASH POINT (TEST METHOD)
N/A
.11.11111 ALif.d'fmi ~
AUTOiGNITTON TEMPERATURE
;;rr:',-d
N/A
FLAMMABLE LIMITS IN AIR. To BY VOL
J
LOWER
N/A
UPPEH
N/A
EXTINGUISHING MEDIA
Water spray on dry chemical (Ammonium Phosphate Base)
SPECIAL FIRE RGHT1NG PROCEDURES
UNUSUAL FIRE ANO EXPLOSION
Cool exposed resins with water spray to prevent melting and dripping.
Incomplete combustion can lead to formation of carbon monoxide,irri
tating fumes and smoke. Self-contained breathing apoaratus should be
^
1 ` ---- CCR 000001850
CONDITIONS CONTRIBUTING TO INSTABILITY
INCOMPATIBILITY
Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZAROOUS DECOMPOSITION PROOUCTS
Burning or heating to high'.temperatures may release irritating low molecular weight composition products.
CONOmONS CONTRIBUTING TO HAZAROOUS POLYMERIZATION Will not occur.-
vie SPlUIQlTLEIUCFRQCEDURES^r
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD
May be disposed of in landfill in accordance with local, state or federal regulations.
VENTILATION REQUIREMENTS
General ventilation for thermal processing and nuisance dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
respiratory (SPECIFY in detail):
If dust is produced during handling of material an
approved air-purifying respirator should be used.
eye Standard safety glasses or chemical goggles.
d
GLOVES:Generally not required unless handling hot or molten resins.
N/AOTHER CLOTHING ANO EQUIPMENT:
CCR 000001852
'i- :
^.rxv- HAZARD^ CLASSIFICATION^INFORMATION
IMCQ HAZARD CUSS ANO NUMBER
US DOT CLASSIFICATION
N/A N/A
UN NUMBER
N/A
EEC DANGEROUS SUBSTANCE CLASSIFICATION
>"
ADR CUSS NUMBER
SC SPECIAL RISKS AND SAFETY ADVICE
CAS NUMBER
9002-88-4
USUAL SHIPPING CONTAINERS
STORAGE TRANSPORT TEMPERATURE
TRANSPOETTATlOfiAND: STORAGE
ELECTROSTATIC ACCUMULATION HAZARD STORAGE/TRANSPORT PRESSURE
LOAQING/UNLOADING TEMPERATURE
viscosm at ldaoing/unloading temperature
: HANDLING. AND STORAGE MATERIALS AND COATINGS
SUITABLE
UNSUITABLE
The acova aata is sasea on tesa ana exoenenee whicn Conoco oeiieves reiiacte ana are succtied for imarmaoonat ourooses only. Conoco cadaims any liaoiiify for carnage or intury which results from me use of me aoove oata ano nothing contained therein snail constitute a guar* antee. WARRANTY CF MERCHANTABILITY, or reoresentanon (inciuotng freeoom from patent tiaciiiryj by Conoco with resoect to tne oata. me oroauct aescnbea. or their use for any soscmc cursose. even if mat purpose is known to Conoco.
4
CCR 000001853
DRAFT
MATERIAL SAFETY DATA SHEET
conoco
Conoco Chemicals 5 Greenway Plaza East
Houston, Texas 77001
MANUFACTURER'S NAME rConoco Chem. icals
ADDRESS p G
TRADE NAME
Box 2197 - Houston, TX 77001 Conoco 2010
SYNONYMS
High Density Polyethylene
REGULAR TELEPHONE NO. EMERGENCY TELEPHONE NO.
hazardous:ingredients?
BOILING POINT (F.)
VAPOR DENSITY (AIR -- 1)* SOLUBILITY IN-WATER APPEARANCEANO ODOR
N/A
SPECIFIC GRAVITY (HJ1 = 1}
N/A N/A
EVAPORATION RATE
( -1)
MELTING POINT
Translucent Odorless Pellets
0.960g/cm3
N/A N/A 134 C
FLASH POINT (TEST METHOD}
N/A
AUTOIGNITION TEMPERATURE
N/A
FLAMMABLE LIMITS IN AIR. % BY VOL.
*
LOWER
N/A
UPPER
N/A
EXTINGUISHING MEDIA
Water spray on dry chemical (Ammonium Phosphate Base)
SPECIAL RRE RGHT1NG PROCEDURES
UNUSUAL FIRE Awn FYPi.nsinN
Cool exposed resins with water spray to prevent melting and dripping. Incomplete combustion can lead to formation of carbon monoxide,irri tating fumes and smoke. Self-contained breathing apparatus should be
wu iii i I en LB! I IIU Cwl'l 1. i icu S pdLC .
CCR 000001854
EYES: If dust enters the eye* flush with large amounts of water.
SKIN:
N/A
INHALATION:
N/A
INGESTION:
Seek Medical Aid
NATURE OF HAZARD
EYES: This material is not expected to present a hazard to the eyes.
This material is not expected to present a hazard to the intact skin. ' Molten resins will produce thermal burns.
inhalation: This material is not expected to present an inhalation hazard under normal use.
This material is not expected to present an ingestion hazard.
INGESTION:
EFFECTS OF OVEREXPOSURE: ACUTE OVEREXPOSURE: CHRONIC OVEREXPOSURE:
No adverse health effects are expecxeo to occur wren exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylene.
THRESHOLD UMIT VALUE (TLV)
3
' ACGIH: 10 mg/m nuisance dust
TOXICITY DATA SX1N CONTACT: N/A
EYEtONTACT:
n/A
INHALATION:
N/A
INGESTION:
N/A
CCR 000001855
CONOmONS CONTRIBUTING TO INSTABILITY
INCOMPATIBILITY
Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZARDOUS DECOMPOSmON PRODUCTS
Burning or heating to high'-temperatures may release irritating low molecular weight composition products.
CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION Will not occur.-
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD
May be disposed of in landfill in accordance with local* state or federal regulations.
VENTILATION REQUIREMENTS
General ventilation for thermal processing and nuisance dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFY IN DETAIL):
If dust is produced during handling of material an approved ai r-puri tying respirator should be used.
EYE: Standard safety glasses or chemical goggles.
*
GLOVES:Generally not required unless handling hot or molten resins.
OTHER CLOTHING ANO EQUIPMENT: N/A
CCR 000001856
IMCO HAZARD CUSS ANO NUMB
N/A
UN NUMBER
n/a
HAZARD:CUSSiRCAnOff INFORMATION*
US DOT CUSSIRCATION
N/A
EEC DANGEROUS SUBSTANCE CLASSIFICATION
'
ADR CUSS NUMB
ESC SPECIAL RISXS ANO SAFETY ADVICE
"
CAS NUMB 9002-38-4
.'
USUAL SHIPPtNG CDNTAiNS STORAGE TRANSPORT TEMPERATURE
ELECTROSTATIC ACCUMULATION HAZARD STORAGE-TRANSPORT PRESSURE L0ADING/UNL0A0ING TEMPERATURE
r.
VISCOSITY AT L0AD1NG/UNL0A0ING TEMPERATURE
1 HANDUN6.AND STORAGE MATERIALS AND. COATINGS
SUITABLE
UNSUITABLE
The acove cata is cased on tests ana exoenence which Conoco oeiieves rwiaoie and are suociied for informational ourooses only. Conoco disclaims any liaojiity for damage or injury wmcn results from the use of the aoove oata ana nothing contained (herein snail constitute a guar* antae. WARRANTY OP WSRCHANTABIUTY. or reoresentaoon {including freedom from patent liaoiiity) Oy Conoco with resoea to the oatau the product oescnoed. or their use for any soecrfie aumose. even if that purpose is known rp Conoco.
CCS 00ia5?
DRAFT
MATERIAL SAFETY DATA SHEET
conoco
Conoco Chemicals 5 Greenway Plaza East P.O. Box2197 Houston, Texas 77001
_ ..............
FLASH POINT (TEST METHOD)
N/A
AUT0IGNTT70N TEMPERATURE
N/A
FLAMMABLE LIMITS IN AIR. % BY VOL
LOWER
N/A
UPPER
N/A
extinguishing: MEDIA
Water spray on dry chemical (Ammonium Phosphate Base)
SPECIAL FIRE FIGHTING PROCEDURES
UNUSUAL FIRE AND EXPLOSION
Cool exposed resins with water spray to prevent melting and dripping. Incomplete combustion can lead to formation of carbon monoxide,irri tating fumes and smoke. Self-contained breathing apparatus should be
.vuru--if eiiidimy LJiifiiieu S(jaLS.------------------------------------------------------------------------------------------------
CCR 00000185 8
FIRST AID
EYES:
If dust enters the eye, flush with large amounts of water.
SKIN:
N/A
INHALATION: N/A
INGESTION:
Seek Medical Aid
MATURE OF HAZARD
EYES: This material is not expected to present a hazard to the eyes.
This material is not expected to present a hazard to the intact skin. SH ' Molten resins will produce thermal burns.
INHALATION: This material is not expected to present an inhalation hazard under normal use.
This material is not expected to present an ingestion hazard.
INGESTION:
EFFECTS OF OVEREXPOSURE: ACUTE OVEREXPOSURE: CHRONIC OVEREXPOSURE
No adverse health effects are expectea-to occur witn exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylei
THRESHOLD LIMIT VALUE (TLV) ACGIH: 10 mg/m^ nuisance dust
TOXICITY DATA SKIN CONTACT: N/A
EYEtONTACT:
N/A
INHALATION:
N/A
INGESTION:
N/A
000001B59 CCR
CONDITIONS CONTRIBUTING TO INSTABILITY
INCOMPATIBILITY Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZAROOUS DECOMPOSITION PROOUCTS Burning or heating to high*'temperatures weight composition products.
may
release
irritating
low molecular
CONDITIONS CONTRIBUTING TQ HAZARDOUS POLYMERIZATION Will not occur. * -
VIC 'Ht1*
SPimOffLEAiCPHOCEDUHk^^JS-', ^
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD May be disposed of in landfill regulations.
in accordance with local, state or federal
VENTILATION REQUIREMENTS General ventilation for thermal processing and nuisance
dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFY IN DETAIL1:
If dust is produced during handling of material an approved air-purifying respirator should be used.
EYE: Standard safety glasses or chemical goggles.
GLOVES:Generally not required unless handling hot or molten resins.
OTHER CLOTHING AND EQUIPMENT: N/A
HAZARD: CtASSIRCATlOWINFOHIVIATIOM ^
1MC0 HAZARD CLASS AND NUMBER
N/A
UN NUMBER
N/A
ADR CUSS NUMBER
US DOT CLASSIFICATION
N/A
EEC DANGEROUS SUBSTANCE CLASSIFICATION *-
EEC SPECIAL RISKS AND SAFETY ADVICE
-CAS NUMBER
9002-88-4
: ;; V ,v. USUAL SHIPPING CONTAINERS
T
STORAGE TRANSPORT TEMPERATURE
IHANSP0EfTATI0Pi AND: STORAGE
ELECTROSTATIC ACCUMULATION HAZARD STORAGE/TRANSPORT PRESSURE
L0ADING/UNLCAOING TEMPERATURE
VISCOSITY AT LOADING/UNLOADING TEMPERATURE
..... ` '
I HANDUNa AND STORAGE NIATHB1ALS AND-COATINGS.
SUITABLE
|
UNSUITABLE
:
*
The acove cata is Oased on tears anc axoenence wmcn Conoco oeiievea reiiaoie anc are suociied for mToimaoonai ourcoses only. Conoco disclaims any liaoiiity tor Carnage or tniury whicn results from the use of the aoove data and norning contained therein snail consotute a guar antee. WARRANTY OF MERCHANTABILITY, or reoresemation (inciuaing freeoom from patent liaoiiiryj Oy Conoco wicn resoect to the data, trie oroouct sescnoed. or tnwr use for any soecrfic purpose, even if that ournose is known to Conoco.
OOOOOXS61 CCR
DRAFT
MATERIAL SAFETY DATA SHEET
(conoco)
Conoco Chemicals 5 Greenway Plaza East P.O. Box 2197 Houston, Texas 77001
mpiucpo^
MANUFACTURER'S NAME Conoco Chemicals ADDRESS P. 0. Box 2197 - Houston, TX 77001 TRADE NAME Conoco 2003
SYNONYMS
High Density Polyethylene
REGULAR TELEPHONE NO. EMERGENCY TELEPHONE NO.
HAZARDOUS INGREDIENTS' ;''
MTT^rsgg*s^^ 80IUNG POINT (F.)
VAPQR.PRESURE(mni Hg;) VAPOR DENSITY (AIR -- 1) SOLUBILITY IN WATERAPPEARANCE AND ODOR
N/A N/A N/A N/A
1 hh'w-gaBga^isgl SPECIFIC GRAVITY (H.a = 1| "| 0.957q/on3
PERCENT VOLATILE
_____________ BY VOLUME (%>
EVAPORATION RATE
f = 11
MELTING POINT
N/A N/A
134 C
Translucent Odorless Pellets
EXTINGUISHING MEDIA
SPECIAL FIRE FIGHTING PROCEDURES
UNUSUAL FIRE AND EXPLOSION
N/A
|
Water spray on dry chemical (Ammonium Phosphate Base)
Cool exposed resins with water spray to prevent melting and dripping. Incomplete combustion can lead to formation of carbon monoxide,irrirating fumes and smoke. Self-contained breathing apparatus should be
ooooo 1&&2. CX*
FIRST AID
EYES:
If dust enters the eye, flush with large amounts of water.
SKIN:
N/A
INHALATION:
N/A
INGESTION:
Seek Medical Aid
NATURE OF HAZARD
EYES: This material is not expected to present a hazard to the eyes.
This material is not expected to present a hazard to the intact skin. * Molten resins will produce thermal burns.
INHALATION: This material is not expected to present an inhalation hazard under normal use.
This material is not expected to present an ingestion hazard.
INGESTION:
EFFECTS OF OVEREXPOSURE; ACUTE OVEREXPOSURE
No adverse health effects are expected to occur wren .exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylens.
CHRONIC OVEREXPOSURE:
THRESHOLD LIMIT VALUE (TLV) ACGIH: 10 mg/m nuisance dust
TOXICITY DATA
SKIN CONTACT: N/A
EYEtDNTACT:
n/A
INHALATION:
N/A
INGESTION:
N/A
CCR 000001863
VT
~
CONDITIONS CONTRIBUTING TO INSTABILITY
HEflanvmrDflmr?
INCOMPATIBILITY
Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZARDOUS DECOMPOSITION PRODUCTS Burning or heating to high'-temperatures weight composition products.
may
release
irritating
low molecular
CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION
Will not occur.*
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD
May be disposed of in landfill in accordance with local, state or federal regulations.
VENTILATION REQUIREMENTS
General ventilation for thermal processing and nuisance dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFY IN DETAIL):
If dust is produced during handling of material an approved air-purifying respirator should be used.
EYE: Standard safety glasses or chemical goggles.
GLOVES:Generally not required unless handling hot or molten resins.
OTHER CLOTHING AND EQUIPMENT: N/A
CCR 000001864
^ -.-77;- HAZARD: CIASSJRtrATIQrf INFORMATION
IMCO HAZARD CLASS ANO NUMBER
N/A
US DOT CLASS1BCATT0N
N/A
UN NUMBER
N/A
| EEC DANGEROUS SUBSTANCE CLASSIFICATION
> '
ADR CLASS NUMBER
SC special risks ano safety advice
-
CAS NUMBER
9002-88-4
: ---Tr -
USUAL SHIPPING CONTAINERS
^ tv- THANSPGOTATJQN ANO. STORAGE
ELECTROSTATIC ACCUMULATION HAZARD
STORAG&TRAN5POHT PRESSURE
storage TRANSPORT TEMPERATURE
LQAQ1NG/UNLQADING TEMPERATURE
VISCOSITY AT LOADING/UNLOADING TEMPERATURE
' 7` 7 HANDLING AND STORAGE MATERIALS ANa COATINGS
SUITABLE
UNSUITABLE
:
The acove aata is aasea on tests ana experience wnicn Conoco owieves reiiacie ano are succiiec for informaoonai purposes oniy. Conoco discaims any liability for damage or injury wnicn results from tne use of cne aoove data ana notnmg contained tnerem snail constitute a guar antee. WARRANTY OF MERCHANTABILITY, or reoresentacon fincucing freedom rrom patent liaoiiicy) by Conoco wim resoect to tne cata. tne orcaucr aescnbec, or tnetr use for any soecrfic purpose, even if cnat ouroose is known to Conoco.
CCR 000001365
" DRAFT
MATERIAL SAFETY DATA SHEET
Conoco Chemicals 5 Greenway Plaza East P.O. Box 2197 Houston, Texas 77001
MANUFACTURER'S NAME rConoco rCuhem. ica,ls
AOORESS p Q
TRADE NAME
Box 2197 - Houston, TX 77001 Conoco 3001
SYNONYMS
High Density Polyethylene
REGULAR TELEPHONE NO.
, EMERGENCY TELEPHONE NO.
HAZARDOUS:INGREDIENTS
| 11 fS-r- - . -|TT.
VT `7a;
--^*.^^3 J ! ^ <s (H M a i f ^ f^ - 11 -11" wjjpmep
BOIUNG POINT (F.)
I ,'
__ ____ _________ _________________ ILCA_______________
VAPOR-PRESUREdmn Hg;)
N/A
VAPOR DENSITY (AIR
N/A
SPECIFIC GRAVITY (HJ1. = 1}
PERCENTVOLATILE
BY VOLUME (%}
EVAPORATION: RATE
f = ir
SOLUBILITY IN WATER APPEARANCE AND ODOR
N/A 1
11
METING POINT " .........
Translucent Odorless Pellets
0.950g/cm3
N/A N/A
130 C -.. .
, i
FLASH POINT (TEST METHOO)
N/A
FLAMMABLE UMITS IN AIR. % BY VOL
AUTDIGNITIONTEMPERATURE
j LOWER
N/A
N/A UPPEB | N/A
EXTINGUISHING MEDIA
SPECIALRHE FIGHTING PROCEDURES
Water spray on dry chemical (Ammonium Phosphate Base)
Cool exposed resins with water spray to prevent melting and dripping. Incomplete combustion can lead to formation of carbon monoxide,irri tating fumes and smoke. Self-contained breathing apparatus should be wc
FIRST AID
EYES:
HEAIIKHAZARIEINFaHMAnOH^;
If dust enters the eye, flush with large amounts of water.
SKIN:
N/A
INHALATION: N/A
INGESTION:
Seek Medical Aid
NATURE OF HAZARD
EYES: This material is not expected to present a hazard to the eyes.
This material is not expected to present a hazard to the intact skin. SKW- Molten resins will produce thermal bums.
INHALATION: This material is not expected to present an inhalation hazard under normal use. .
This material is not expected to present an ingestion hazard.
INGESTION:
EFFECTS OF OVEREXPOSURE: ACUTE OVEREXPOSURE: CHRONIC OVEREXPOSURE:
No adverse health-- effects are expected to occur witn exposure to this material. Irritation to the upper respiratory tract may occur with exposure to fumes or smokes produced when heating or burning polyethylene
THRESHOLD LIMIT VALUE (TLV) ACGIH: 10 mg/m^ nuisance dust
TOXICITY DATA SKIN CONTACT: N/A
EYEtONTACT:
N/A
INHALATION:
N/A
INGESTION:
N/A
CCR 000001B67
CONDITIONS CONTRIBUTING TO INSTABILITY
INCOMPATIBILITY Can be affected by oxidizing acids and some chlorinated hydrocarbon solvents.
HAZARDOUS DECOMPOSITION PRODUCTS Burning or heating to high'-temperatures weight composition products.
may
release
irritating
low molecular
CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION Will not occur.
SPItEDKLEniCPHOCEnUREStS'
STEPS TO BE TAKEN IF MATERIAL JS RELEASED OR SPILLED Sweep up pellets and place in suitable containers for recycle or disposal. Pellets on walking surfaces may be a slipping hazard.
NEUTRALIZING CHEMICALS
N/A
WASTE DISPOSAL METHOD May be disposed of in landfill regulations.
in accordance with local,
state or federal
VENTILATION REQUIREMENTS General ventilation for thermal processing and nuisance
dust control.
SPECIFIC PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY (SPECIFYIN DETAIL):
If dust is produced during handling of material an approved air-purifying respirator should be used.
EYt
Standard safety glasses or chemical goggles.
GLOVES: Generally not required unless handling hot or molten resins.
OTHER CLOTHING ANO EQUIPMENT: N/A
000001B68 CCR
IMCO HAZARD CLASS ANO NUMBS
N/A
UN NUMBER
N/A
HAZARD: CLASSIFICATION INFORMATION'
US DOT CLASSIFICATION
N/A
EEC DANGEROUS SUBSTANCE CLASSIFICATION
**
AOR CUSS NUMBER
EC SPECIAL RISKS ANO SAFETY ADVICE
^,
'
CAS NUMBER 9002-38-4
USUAL SHIPPING CONTAINERS
: TRANSPORTATION. AND: STORAGE
ELECTROSTATIC ACCUMULATION HAZARD
STORAGE/TRANSPORT PRESSURE
STORAGE TRANSPORT TEMPERATURE
U3A0ING/UNU3A01NG TEMPERATURE
VISCOSITY AT LOAOiNG/UNLOADING TEMPERATURE
HANDLING AND STORAGE MATERIALS AND. COATINGS-
SUITABLE
UNSUITABLE
The acove cata is oasec on teats anc exoenencs wnten Conoco oeiieves reiiaoie anc are succiied lor informational ourooses omy. Conoco disclaims any liaoiiity for carnage or injury whtcn results from the use of the aoove oata ano nothing contained therein shall constitute a guar* antes. WARRANTY OR MERCHANTABILITY, or representation (including freedom from patent liaoiiity) Py Conoco with reseed to the data, the proouc: oesenbed. or thetr use for any soecnc purpose, even if that ouroose is known to Conoco.
CCR 000001869