Document eE7gz7VLGRQZ7LJ4XKe0Ek8y

Cold Forming of Metals sides of enclosure should extend as far to SLOTS OR PLASTIC WINDOW IT MORE VISIBIUT/ OF DIE IS REQUIRED FlC 25-13 -- Die enclosure guard for strip or coil stock showing the vertical clearances required Courtery Liberty Mutual Insurance Co FlC 25-14 --Die guard made of preslotted mate rial can be easily fabricated in the shop Torque A twisting effort which produces or tends to produce rotation Trip or Trip device An auxiliary mecha nism, which may be manually, mechanically, or automatically operated, which starts, stops, or otherwise controls operation of the primary mechanism Point-of-operation guarding Some means of safeguarding press opera tors at the point of operation should be pro vided and used on every press The type of guard or protective device selected will be determined by the method of feeding and by the applicability of the guard or device to the specific operation Before a guard is built, the entire operation should be analyzed to determine how the processed piece can be best fed to the die, indexed or nested, and the piece and the 702