Document e7NKNpk4Yj6ae0mDJ9dK5Y2oG

DUP210011351 DUP210011352 Introduction THIS booklet contains information on chemicals and allied products manu factured and sold by E. I. DU PONT DE NEMOURS & COMPANY (In c .) and its subsidiaries. Its purpose is to provide a convenient source of information on the ' properties, uses and other data for Du Pont products. .......... { ' -- Descriptions of products are limited to the bare essentials. For more detailed information, contact main or branch offices of the departments, divisions or subsidiaries which market the products. The addresses of these offices are given on the first page of each department, division and subsidiary. fl 1 I DUP210011353 DUP210011354 DEPARTMENTAL SECTION Operating Units and Subsidiaries PAGE Elastomer Chemicals Department............. I Accelerators for Rubbers.................................... 1 Antioxidants for Rubbers................................... 2 Miscellaneous Chemicals for Rubbers............. 2 Synthetic Rubbers............................................... 4 Electrochemicals Department..................... 6 Acrylic Products...............................................i . 6 Ceramic Products................................................. 6 . Chlorine. Products .. .,,,.................................... & Electroplating Products...................................... 8 Furan Products......................................................10 Peroxygen Products..............................................10 Sodium and Cyanide Products.......................... 11 Vinyl Products.......................................................12 Explosives Department................................. 14 Blasting Supplies and Accessories.....................14 Explosives............................................................... 16 Blasting Agents......................................................17 Chemical Sales....................................................... 19 Smokeless Powders.......................................21 Fabrics and Finishes Department.............. 22 Fabrics Division.................................................... 22 Finishes Division................................................... 24 Automotive Finishes.................................... 24 Automotive Refinishing Materials........... 27 Industrial Finishes........................................30 Specialties Sales.............................................34 Trade Sales Finishes.................................... 38 Film Department.............................................45 "Cel-O-Seal" Bands Division............................ 47 PAGE Industrial and Biochemicals Department 48 Industrial Chemicals..................... 48 Anti-Freeze Products.......................................59 Biochemicals.....................................................60 Organic Chemicals Department..................66 Dyes and Chemicals Division......................... 66 "Freon" Products Division............................. 79 Petroleum Chemicals Division........................81 Photo Products Department.......................... 84 Camera Negative Films.................................. 84 Radiographic Products....................................85 Industrial Products..........................................87 Trade Products................................................88 Luminescent Chemical Products.................... 90 Printing Plate Products.................................. 90 Pigments Department..................................... 91 Pigment Colors................................................91 Titanium Pigments..........................................92 Specialty Products...........................................92 Polyehemicals Department............................93 Plastics Products Division.............................. 95 Remington Arms Company, Inc..................96 Peters Cartridge Division..............................101 Surplus Materials Division..........................103 Textile Fibers Department............................104 III DUP210011355 Abbreviatior atm........................................................ atmosphere bbl.......................................................... barrel Be .......................................................... degrees Baume B.P........................................................ boiling point C ............................................................. degrees Centigrade cc........................................................... cubic centimeter cm...........................................................centimeter C.P........................................................ Chemically Pure cu. ft.......................................................cubic foot dia...........................................................diameter F ............................................................. degrees Fahrenheit fl. oz........................................................fluid ounce F.P......................................................... freezing point ft.............................................................foot ft-lb........................................................ foot-pound g............................................................. gram gal...........................................................gallon g/1..........................................................gram per liter g/ml...................................................... gram per milliliter in............................................................ inch 1.............................................................. liter lb............................................................ pound max........................................................ maximum min......................................................... minimum ml........................................................... milliliter mm......................................................... millimeter M.P................................... ................... melting point N.F.........................................................National Formulary No.......................................................... number oz............................................................ounce pt............................................................pint qt............................................................quart sec....................................... ...................second Sp.Gr. 1.5, 1.021, etc............................ specific gravity at 2QC. referred to water at 4C. Sp.Gr. 1.625 (15/15C.). etc................ 'specific gravity at 15C. referred to water at 15C. sq. ft.......................................................square foot sq. in...................................................... square inch temp....................................................... temperature U.S.P.......................................................United States Pharmacopoeia wt........................................................... weight vd........................................................... vard Advertising Department, January 1961 IV DUP210011356 ELASTOMER CHEMICALS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Akron 8, Ohio Atlanta 3, Georgia Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 3, Illinois Detroit 35, Michigan Houston 6, Texas Los Angeles 58, California New York, New York Palo Alto, California Trenton 8, New Jersey 40 East Buchtel Avenue at High Street 1261 Spring Street, N. W. 140 Federal Street 427 West Fourth Street 7 South Dearborn Street 13000 West Seven Mile Road 2 601A West Grove Lane 2930 East 44th Street To Reach Trenton Office Call 701 Welch Road 1750 North Olden Avenue PLANTS: Beaumont, Texas Carneys Point, New Jersey Louisville, Kentucky Montague, Michigan TELEPHONE PRospect 4-1000 POrtage 2-8461 TRinity 5-5391 HAncock 6-1719 FRanklin 5-5561 ANdover 3-7000 UNiversity 4-1963 MOhawk 7-7429 LUdlow 2-6464 WAlker 5-3290 DAvenport 6-7550 EXport 3-7141 PRODUCTS ACCELERATORS FOR NATURAL AND SYNTHETIC RUBBERS % Rubber Accelerator: Formaldehyde-para-toluidene condensation product. Creamy white non-dusting powder; Sp. Gr. 1.11. Us e: To accelerate and improve the vulcani zation of natural and synthetic rubber. Co n t ain er s : 125-lb. drums. "808" Rubber Accelerator: Butyraldehyde-aniline con densation product. Amber liquid; Sp. Gr. 0.98. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber, especially for hard rubber. Co n t a in e r s : 425-lb. drums. "833" Rubber Accelerator: Butyraldehyde-monobutylamine condensation product. Reddish-amber liquid; Sp. Gr. 0.86. Us e; To accelerate and improve the vulcanization of natural and synthetic rubber, especially for neoprene cements. Co n t a in e r s : 225-lb. drums. "552" Rubber Latex Accelerator: Piperidinium pentamethylene dithiocarbamate -- CH2(CHa)<NC(S)SNH3(CHz)4CHs. A cream colored crys talline powder; Sp. Gr. 1.20; melts with decomposition at not lower than 167C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds; as peptizer or plasticizer for neoprene. Co n t a in e r s : 125-lb. drums. Accelerator for "Viton": Hexamethylenediamine carba mate +H3N(CH2)aNHCOa-. A white very fine powder; Sp. Gr. 1.15; Melting Pt. range 152C.-I55C. Us e: To accelerate and improve the vulcanization of "Viton" fluoroelastomer. Co n t a in e r s : 5-lb. drums. "Barak" Rubber Accelerator: Dibutylammonium oleate, (C4H3)2NH2COO(Ci7H33). Dark amber liquid, Sp. Gr. 0.88. Us e-:-As-an activator for other rubber accelerators to improve the vulcanization of natural and synthetic rub ber. Co n t a in e r s : 175-lb. drums. Conac S Rubber Accelerator: N-Cyclohexyl-2-benzothiazole sulfenamide -- CsHiSNCSNHCHCaH^CHa. A cream colored powder; Sp. Gr. 1.27; M.P. 200-212F. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber. Co n t a in e r : 50-lb. bags. DOTG Rubber Accelerator: Di-ortho-tolylguanidine-- (CH3C3H4NH) CNH. A white non-dusting powder; Sp. Gr. 1.10; M.P. I71C. min. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber. Co n t ain er : 100-lb. drums. MBT(2- Merca ptobenzothiazole)--C8H4SC(SH)N: Pale yellow powder; Sp. Gr. 1.50. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. MBTS (2-Benzothiazolyl disulfide)--{C8jjUSCN)2S3: Pale yellow powder or grains; Sp. Gr. 1.54. Us e: To accel erate and improve the vulcanization ofnatural and synthet ic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. . NA-22('2-IVIercaptoimidazoline)--CH>CH?NC(SH)NH: A white powder; Sp. Gr. 1.42; M. P. not lower than 195C. USE: To accelerate and improve the vulcanization of neoprene. Co n t a in e r s : 125-lb. drums. 1 DUP210011357 ELASTOMER CHEMICALS DEPARTMENT ANTIOXIDANTS, CHEMICALS "Permalux" Neoprene Accelerator: Di-o-tolylguanid i n e salt of dicatechol borate -- (HOChH40)2BN(NHCsKUCHaJj. Light grayish brown powder; Sp. Gr. 1.27; F. P. not lower than 165C. Us e: To accelerate and improve the vulcanization of neoprene. A nondiscoloring antioxidant for natural and synthetic rubbers. Co n t a in e r s : 125-lb. drums. "Tepidone" Rubber Accelerator: 47% water solution of sodium dibutyldithiocarbamate--(C<Hs)2NC(S)SNa. An amber liquid; Sp. Gr. 1.09. Us e; To accelerate and im prove the vulcanization of natural and synthetic rubber latex compounds. Co n t a in e r s : 440-lb. drums. "Tetrone" A Rubber Accelerator: Dipentamethylene thiuram tetrasulfide--[CHa(CHa)tNCS]gS4. Light gray powder; Sp. Gr. 1.53; M. P. not lower than 110C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 125Ib. drums. "Thionex" Rubber Accelerator: Tetramethylthiuram monosulfide--[(CH3)2NCS]2S. Lemon yellow powder or grains; Sp. Gr. 1.39; M. P. not lower than 105C. Us e: To accelerate the vulcanization of natural and synthetic rubbers. Co n t a in e r s : 50-Ib. boxes. Thiuram E Rubber Accelerator: Tetraethylthiuram disulfide--[(CsHs)2NCS]2Se. White powder or grains; Sp. - Gr. 1.30; M.- P. not lower than 66C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 100-lb. drums. Thiuram IVI Rubber Accelerator: Tetramethylthiuram disulfide--[(CHj^NCS]sS2. White powder or grains; Sp. Gr. 1.41; M. P. not lower than 141C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds.. Co n t a in e r s : 50-lb. boxes. "Zenite" Rubber Accelerator: 90% zinc salt of 2mercaptobenzothiazole--[CeH4SC(S)NlaZn. and 10% inert hydrocarbon. A light cream colored, waxy powder; Sp. Gr. 1.53. Us e: To accelerate and improve vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. "Zenite" A Rubber Accelerator: 97% zinc salt of 2-mercaptobenzothiazole (See "Zenite" above this page) and 3% Tetramethylthiuram monosulfide. (See "Thionex" above.) A light cream colored very fine non-dusting pow der; Sp. Gr. 1.42. Us e: To accelerate and improve the vul canization of natural and synthetic rubber. Co n t a in e r s : 150-lb. drums. "Zenite" Special--Rubber Accelerator: Zinc salt of 2-mercaptobenzothiazole (See "Zenite", this page, above). A light-cream colored powder; Sp. Gr. 1.68. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. ANTIOXIDANTS FOR NATURAL AND SYNTHETIC RUBBER "Akroflex" C Rubber Antioxidant: 35% diphenylparaphenylenediamine--CeH^NHCsHs)*, and 65% phenylalpha-naphthylamine (See "Neozone" A, below). Dark gray waxy pellets; Sp. Gr. 1.23; F. P. not lower than 75C. Us e: To improve the aging and service life of natural and synthetic rubbers; anti-crosslinking agent for SBR (styrene butadiene rubber). Co n t a in e r s : 250-lb. drums. "Akroflex" CD Rubber Antioxidant: 35% diphenylpara-phenylenediamine (Sge "Akroflex" C, above), and 65% phenyl-beta-naphthylamine (See "Neozone" D, be low). Dark gray pellets; Sp. Gr. 1.22. Us e: To improve the aging and service life of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. "Antox" Rubber Antioxidant: Condensation product of butyraldehyde-aniline. Amber liquid; Sp. Gr. 1.04. Us e : To improve the aging and service life of natural and syn thetic rubbers. Co n t a in e r s : 275-lh. drums. "Neozone" A Rubber Antioxidant: Phenyl-alphanaphthylamine--CioHjNHCsHs. Yellow pellets which turn dark purple on exposure to air or light; Sp. Gr. 1.22; F. P. not lower than 50C. Us e: To improve the aging and service life of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. "Neozone" D Rubber Antioxidant: Phenyl-beta-naph thylamine--Cio H7NHC8Hs. Fine light gray powder; Sp. Gr. 1.24; F. P. not lower than 106C. Us e: To improve the aging and service life of natural and synthetic rubbers; stabilizer in manufacture of SBR. Co n t a in e r s : 160-lb. drums. "Thermoflex" A Rubber Antioxidant: 25% di-paramethoxydiphenylamine--(CH3OC6H4)aNH, 25% diphenyl-para-phenylenediamine--CsH^NHCaHsK and 50% phenyl-beta-naphthylamine--CioHrNHCaHj. Dark gray pellets; Sp. Gr. 1.21; F. P. not lower than 67C. Us e: Promote outstanding heat aging and flex life of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. "Zalba" Rubber Antioxidant: A hindered phenol. Amber colored viscous liquid; Sp. Gr. 0.94. Us e: To im prove aging and service life of natural and synthetic rubbers. Excellent nondiscoloring antioxidant for natural and synthetic rubbers and latex. A stabilizer for the manu facture of SBR. Co n t a in e r s : 50-lb. drums. "Zalba" Special Rubber Antioxidant: A fortified hindered phenol; Yellow cream colored powder; Sp. Gr. 1.27. Us e: To improve aging and service life of natural and synthetic rubbers. Excellent non-discoloring antioxi dant for natural and synthetic rubbers and latex, a stabilizer for manufacture of SBR. Co n t a in e r s : 100-lb. drums. MISCELLANEOUS CHEMICALS FOR NATURAL AND SYNTHETIC RUBBER A. Rubber Latex Stabilizers and Mold Lubricants. Aquarex D Aquarex G Aquarex L Aquarex MDL Aquarex ME Aquarex NS Aquarex SMO Aquarex WAQ "Aquarex" D Surface Active or Mold Release Agent: Sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the laury! and myristyl derivatives of the type RSOtNa. White powder; Sp. Gr. 1.33. Us e: To improve the stability of latex mixtures and to prevent coagulation due to mechanical friction; in water solution as a mold lubricant. Co n t a in e r s : 100-lb. drums. DUP210011358 ELASTOMER CHEMICALS DEPARTMENT MISCELLANEOUS CHEMICALS "Aquarex" G Surface Active Agent: Water solution of sodium alkyl sulfonate of the type RSOaNa. Clear amber liquid; Sp. Gr. 1.09. Us e: In emulsion polymeri zation of synthetic elastomers and resins. Co n t a in e r s : 425-lb. drums. "Aquarex" L Mold Release Agent: Ammonium salts of alkyl acid phosphates of the type RHPOaONH4. Amber viscous paste; Sp. Gr. 1.01. Us e: As a corrosion inhibiting mold lubricant. Co n t a in e r s : 400-lb. drums. "Aquarex" MDL Surface Active or Mold Release Agent: Water paste of sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D, above). Amber paste; Sp. Gr. 1.08. Us e: A stabilizing and wetting agent for latex mixtures; in water solution as a mold lubricant. Co n t a in e r s : 375-lb. drums. "Aquarex" ME Surface Active or Mold Release Agent: Sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D, above). Creamy white powder; Sp. Gr. 1.06. Us e: A stabilizing and wetting agent for latex mixtures and in water solution as a mold lubricant. Co n t a in e r s ; 150-lb. drums. RPA No. 3 Rubber Peptizing Agent: 36.5% xylenethiols--(CH3)2C,H3Sn, and 63.5% petroleum oil. Amber liquid; Sp. Gr. 0.91. Us e: As a peptizing agent for natural and SBR; a reclaiming agent. Co n t ain er s : 400-lb. drums. RPA No. 3 Concentrated--Rubber Peptizing Agent: 71% xylenethiols--(CHa)aC8HaSH, and 29% petroleum oil. Dark amber liquid; Sp. Gr. 1.04. Us e: As a peptizing agent for natural and synthetic rubbers; as a rubber reclaiming agent. Co n t a in e r s : 450-lb. drums. RPA No. 6 Rubber Peptizing Agent: 90% pentachlo rothiophenol--CC15SH, and 10% inert hydrocarbon. A light gray powder; Sp. Gr. 1.79. Us e: As a peptizing agent for natural and SBR. Co n t a in e r s : 125-lb. drums. RR-10 Reclaiming Chemical: Mixed dixylyl disulfides --[(CHa)aCeHa]aSa). Dark amber liquid; Sp. Gr. 1.05. Us e: An agent for accelerating devulcanization of natural rubber, SBR (styrene butadiene rubber) and mixed scrap during the reclaiming process. Co n t a in e r s : 450-lb. drums. C. Blowing Agents for Natural and Synthetic Rubber. Unicel ND Unicel NDX Unicel S "Aquarex" NS Surface Active Agent: Water solution of C-cetyl-betaine.--(CH3)3NtCH(Ci8H33)COO~. Brown slightly cloudy liquid; Sp. Gr. 1.05. Us e: As a stabilizer for latex mixtures. Due to its amphoteric properties, it functions as a stabilizer in both acid and alkaline dis persions. Co n t a in e r s : 450-lb. drums. "Aquarex" SMO Surface Active Agent: 33% Water solution of mono-sodium salt of sulfated methyl oleate-- CHj(CHa)CH(SO*Na)(CH!),COOCHa. Reddish amber liquid; Sp. Gr. 1.08. Us e: A surface conditioning agent for rubber latex and neoprene latex mixtures. CONTAINERS: 450-lb. drums. "Aquarex" WAQ Surface Active or Mold Release Agent: A water solution of the sodium salts of the sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D). Amber viscous liquid; Sp. Gr. 1.04, Us e: A stabilizing and wetting agent for latex mixtures; diluted, as a mold lubricant. Co n t a in e r s : 400-lb. drums. B. Rubber Peptizing and Reclaiming Agents. Endor RPA #2 RPA #3 RPA #3 Cone. RPA #6 RR-10 "Endor" Rubber Peptizing Agent: Activated zinc salt of pentachlorothiophenol--(CaClS)2Zn, and 80% inert filler. Grayish green powder; Sp. Gr. 2.39. Us e: A peptizing agent for plasticizing natural rubber and all types of SBR (styrene butadiene rubber). CONTAINERS: 100-lb. drums. RPA No. 2 Rubber Peptizing Agent: 33'i% 2-naphthalenethiol--C10H7SH, and 60-.;% inert hydrocarbon. Light cream colored, waxy flakes; Sp. Gr. 0.92. Us e: As a peptizing agent for natural and SBR. Co n t a in e r s : 50-lb. boxes. "Unicel" ND Rubber Blowing Agent: 42% Ji-Nnitrosopentamethylene-tetramine -- NCHaN(NO)CH3N(CH2)CH2N(NO)CH2, and 58% in ert filler. Cream colored powder; Sp. Gr. 1.94. Us e: A nondiscoloring blowing agent for manufacture of natural or synthetic rubber sponge. Co n t ain er s : 100-lb. drums. "Unicel" NDX Rubber Blowing Agent: 80% di-Nnitrosopentamethylene-tetramine--(See"Unicel"ND), and 20% inert filler. Cream colored spongy crumb; Sp. Gr. 1.40. Us e: A nondiscoloring blowing agent for natural or synthetic rubber sponge. Co n t a in e r s : 100-lb. drums. "Unicel" S Rubber Blowing Agent: 50% dispersion of finely divided sodium bicarbonate in oil. A cream colored, free flowing liquid; Sp. Gr. 1.30. Us e: Blowing agent for manufacture of natural or synthetic rubber sponge. Co n t a in e r s : 500-lb. drums. D. Organic Isocyanates. "Hylene" M "Hylene" M-30 "Hylene" MP "Hylene" T "Hylene" TM "Hylene" TM-65 "Hylene" M Organic Isocyanate: Methylene bis (4pher.yl isocyanate)--(CeH4NCO)2CH2. Pale yellow lumps; Sp. Gr. 1.20. Us e: For making urethane adhesives and polymers. Co n t a in e r s : 45- and 500-lb. drums. "Hylene" M-50 Organic Isocyanate: Methylene bis _(4-phenyl isocyanate)--(CH4NCO)2CH2. 50% solution in monochlorobenzene; dark brown liquid; Sp. Gr. 1.16. Us e: In elastomer based adhesives. Co n t a in e r s ; 45- and 500-lb. drums. "Hylene" MP Organic Isocyanate: Bis phenol adduct of methylene bis (4-phenyl isocyanate). Grayish white 3 DUP210011359 ELASTOMER CHEMICALS DEPARTMENT SYNTHETIC RUBBERS powder; water stable. Us e: A bonding agent and adhesive assistant for adhering "Dacron" polyester fiber to rubber compositions in water emulsion or latex systems. Co n t a in e r s : 125-ib. drums. "Hylene" T Organic Isocyanate: Toluene-2,4-diisocyanate--CH3CHs(NCO)s. Water white to pale yellow liquid; Sp. Gr. 1.22. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t ain er s : 45and 500-lb. drums, tank trailers and tank cars. "Hylene" TM Organic Isocyanate: 80% toluene-2, 4-diisocyanate (See "Hylene" T) and 20% toluene-2, 6-diisocyanate--CH3CsH3(NCO)2. Sp. Gr. 1.22; water white to pale yellow liquid. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t a in e r s : 45- and 500-lb. drums, tank trailers and tank cars. "Hylene" TM-G5 Organic Isocyanate: 65% toluene 2,4-diisocyanate, and 35% toluene 2,6-diisocyanate (See "Hylene" TM). Sp. Gr. 1.22. Water white to pale yellow liquid. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers.- Co n t ain er s : 45- and 500-lb. drums, tank trailers and tank cars. E. Special Purpose Chemicals. Copper Inhibitor 50 ELA Heliozone Moca NBC Polyac Retarder W Copper Inhibitor 50: 50% disalicylalpropylenediamine --H0CaH4CHNCHaCH(CH;>)NCHC6H40H, and 50% aromatic solvent. Amber colored liquid; Sp. Gr. 0.99. Us e: To prevent catalytic action of copper on oxidation of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. ELA--Elastomer Lubricating Agent: Mixture of phos phate esters. Light amber liquid; Sp. Gr. 0.99. Us e: A lubricant for unvulcanized natural and synthetic rubber compositions. Co n t a in e r s : 425-lb. drums. "Heliozone" Inhibitor: Blend of selected waxy materials. Pale yellow to buff color, waxy flakes; Sp. Gr. 0.90. Us e: To retard sun checking and cracking of natural and synthetic rubbers. Co n t a in e r s : 50-lb. boxes. "Moca" Curing Agent for Urethane Synthetic Rub bers: Methylene-bis-orthochloroaniline. Tan colored, coarsely ground lumps; Sp. Gr. 1.39. Us e: Curing agent for "Adiprene" L urethane rubber, other urethane rubbers, and epoxy resins. CONTAINERS: 50-lb. drums. NBC Sun or Ozone Cracking Inhibitor: Nickel dibutyldithiocarbamate--[(C4Hs)2NC(S)Sj2Ni). Dark green flakes; Sp. Gr. 1.26; M. P. not lower than 86C. Us e: To prevent cracking due to ozone of SBR (styrene butadiene rubber) stocks. Will improve heat resistance and retard discoloration of neoprene compounds. Co n t a in e r s : 250-lb. drums. "Polyac" Butyl Rubber Conditioner: 25% poly-paradinitrosobenzene--[C6H4(NO)2]x--with an inert wax. Dark brown waxy pellets; Sp. Gr. 0.96. Us e: A processing aid and accelerator of vulcanization for butyl rubber. Co n t a in e r s : 100-lb. drums. Retarder W: Salicylic acid--HOCsH4COOH--with a dispersing agent. Buff colored, non-dusty powder; Sp. Gr. 1.43. Us e: To prevent premature curing of natural and synthetic rubbers; to activate blowing agents. Co n t a in e r s : 300-lb. drums. COLORS FOR RUBBER Rubber Dispersed Colors: Us e: For coloring natural and synthetic rubber compounds. Co n t a in e r s : 50-lb. boxes. SYNTHETIC RUBBERS "Adiprene" C Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Amber colored solid in stick form; Sp. Gr. 1.07. Us e: A synthetic rubber for products that must have exceptional abrasion resistance, high tensile strength and low temperature brittle point. Co n t a in e r s : 50-lb. drums. "Adiprene" L-100 Liquid Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Honey colored liquid; viscosity 14,000 to 19,000 cps at 30C.; Sp. Gr. 1.06. USE: A fluid elastomer which can be converted into a tough elastic solid rubber having excellent resistance to abrasion, oxidation and ozone. Co n t ain e r s : 450-lb. drums. "Adiprene" L-1S7 Liquid Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Honey colored liquid; viscosity 6,000-8,000 cps at 30C. Sp. Gr. 1.06. Us e: A type of "Adiprene" L-100 which will give harder vulcanizates. Has excellent resistance to abra sion, oxidation and ozone. Co n t a in e r s : 450-lb. drums. "Hypaion" 20 Synthetic Rubber--Chlorosuifonated Polyethylene: White chips; Sp. Gr. 1.10. Us e: An elasto mer for products which are oil resistant, unattacked by ozone, have excellent color stability and resistance to heat, weather and chemicals. Co n t a in e r s : 50-1'd . bags or boxes. "Hypaion" 30 Synthetic Rubber--Chlorosuifonated Polyethylene: White chips; Sp. Gr. 1.28. Us e: A solution type material for protective and decorative coatings, a paint base. Coatings are resistant to weathering, ozone, many oils and chemicals. Co n t a in er s : 50-lb. boxes. "Hypaion" 40--Synthetic Rubber--Chlorosuifonated Polyethylene: White chips; Sp. Gr. 1.18. Us e: An im proved elastomer designed for ease in processing. Has excellent oil and heat resistance combined with exceptional color stability and weatherability. Co n t ain e r s : 50-lb. bags. Neoprene Latices: Water emulsions of polymerized 2-chlorobutadiene 1,3. White, milky liquid. USE: For making dipped, impregnated and extruded products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in e r s : 55-gal. drums, 3500-gal. tank trucks, 8000-gal. tank cars. , Type 60--59% solids; Sp. Gr. 1.12. A concentrated latex; chiefly for foamed products. Type 400--50% solids; Sp. Gr. 1.15. General purpose where high modulus, good heat resistance, improved tear strength and exceptional ozone resistance are needed. Type 571--50% solids; Sp. Gr. 1.10. General purpose use. Type 572--50% solids; Sp. Gr. 1.11. Special for adhesives; high wet strength. Type 601-A--59% solids; Sp. Gr. 1.12. A concentrated latex; general purpose use. DUP210011360 ELASTOMER CHEMICALS DEPARTMENT SYNTHETIC RUBBERS Type 635--58% solids; Sp. Gr. 1.12. A concentrated latex. Used in blends with other neoprenes to improve wet gel strength of films. Also for paper pulp additive. Type 650--60% solids; Sp. Gr. 1.11. A concentrated form of Type 750. General purpose use where high solids are desired, particularly in dipped goods. Type 735--37.5% solids; Sp. Gr. 1.08. Used in blends with other neoprenes to improve wet gel strength of films. Also for paper pulp addition. Type 736--34.5% solids; Sp. Gr. 1.06. Especially stabilized for paper pulp addition. Type 750--50% solids; Sp. Gr. 1.10. General purpose use, particularly in dipped goods where low modulus and ex cellent crystallization resistance is required. Type 842-A--50% solids; Sp. Gr. 1.10. Products made from this type do not stiffen at low temperatures. Type 950--50% solids; Sp. Gr. 1.10. A cationic latex; for treatment of fibrous materials. Neoprene Type AC: Polymer of 2-chlorobutadiene 1,3. Creamy white chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength adhesive cements. Co n t a in e r s : 50-lb. bags. Neoprene Type AD: Polymer of 2-chlorobutadiene 1,3. Creamy white chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength, solvent type adhesive cements. Greater viscosity and color stability than Type AC. CON TAINERS: 50-lb. bags. Neoprene Type CG: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength adhesive cements. Co n t a in e r s : 50-lb. bags. Neoprene Type FB: Polymer of 2-chlorobutadiene 1,3. Dark brown putty-like solid of -very low molecular weight; Sp. Gr. 1.23. Us e: A vulcanizable plasticizer for neoprene and other synthetic elastomers; in cement applications which require a high solids-to-viscosity ratio; useful in preparation of caulks and sealants. Co n t ain er s : 100-lb. fiber drums. Neoprene Type GN: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: General purpose for products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in e r s : 50-lb. bags. Neoprene Type GN-A: Polymer of 2-chlorobutadiene 1,3 containing a discoloring antioxidant. Amber chips; Sp. Gr. 1.23. Us e: General purpose for products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in e r s : 50-lb. bags. Neoprene Type GRT: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: For general purpose stocks requiring retention of building tack and flexibility of uncured stocks. Vulcanizates have superior resistance to hardening due to elastomer crystallization. Co n t ain er s : 50-lb. bags. Neoprene Type KNR: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: Chiefly in paints and putties, for lining tanks and chemical equipment. CON TAINERS: 50-lb. bags. . Neoprene Type S: Polymer of 2-chlorobutadiene 1,3 containing a nondiscoloring antioxidant. Amber chips; Sp, Gr. 1.20. Us e: Chiefly in crepe soles that resist softening and are resistant to oil and gasoline; as a stiffener for other neoprenes. Co n t a in e r s : 50-lb. bags. Neoprene Type W: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: General purpose neoprene having much greater storage stability, better processing characteristics and better color retention during cure than the "G" type neoprene. Does not contain sulfur or thiuram stabilizers. Co n t a in e r s : 50-lb. bags. Neoprene Type WB: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: For extruded goods where ultimate in surface appearance is required; highly desirable for calendered items which must be very smooth and resist shrinkage; similar to Type WX in crystallization resistance. Co n t a in e r s : 50-Ib. bags. Neoprene Type WD: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: A high viscosity neoprene to be used in compounds designed for maximum crystallization resistance and low tempera ture flexibility. Co n t a in e r s : 50-lb. bags. Neoprene Type WHV: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: A Type W neoprene of high viscosity for use in compounds containing large amounts of fillers and oils. Can be used as a stiffener for other neoprenes. Co n t a in e r s : 50-lb. bags. Neoprene Type WRT: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.25. Us e: General purpose neoprene having superior resistance to hardening due to elastomer crystallization. Has excellent storage stability, processing properties and wide latitude in compounding. Co n t ain e r s : 50-lb. bags. Neoprene Type WX: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.24. Us e: General purpose neoprene having better resistance to stiffening due to crystallization than Type W. Has ex cellent storage stability, processing properties and wide latitude in compounding. Co n t a in e r s : 50-lb. bags. "Viton" A Fluoroelastomer: White translucent solid; Sp. Gr. 1.82. Us e; For rubber products that must with stand unusually high temperatures up to 600F. in air, chemicals or most liquids. Co n t a in e r s : 50-lb. drums. "Viton" A-HV Fluoroelastomer: White translucent solid; Sp. Gr. 1.82. USE: A type of "Viton" A with high viscosity for rubber products that must withstand un usually high temperatures up to 600F. in air, chemicals or most liquids. Co n t a in e r s : 50-lb. drums. "Viton" B Fluoroelastomer: White translucent solid. Sp. Gr. 1.86. Us e: A type of "Viton" which has superior heat and chemical resistance. Used for rubber products that must withstand unusually high temperatures up to 600F. in air, chemicals or most liquids. CONTAINERS: 50-lb. drums. 5 DUP210011361 ELECTROCHEMICALS DEPARTMENT GENERAL. OFFICE: DuPont Building Wilmington 98, Delaware DISTRICT OFFICES: Boston (Waltham 54), Massachusetts Charlotte 1, North Carolina Chicago 46, Illinois Cincinnati 2, Ohio Cleveland 20, Ohio Dallas 21, Texas Detroit 35, Michigan Los Angeles, California New York 1, New York Philadelphia (Wynnewood), Pennsylvania San Francisco 24, California 45 Fourth Avenue 427 West Fourth Street 7250 North Cicero Avenue, Lincolnwood 2412 Carew Tower 11900 Shaker Boulevard 8510 Ambassador Row 13000 West Seven Mile Road P.O. Box 70, El Monte, California 350 Fifth Avenue 308 East Lancaster Avenue 1485 Bayshore Boulevard PLANTS: Memphis, Tennessee Niagara Falls, New York Perth Amboy, New Jersey EXPORT DIVISION: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 TWinbrook 9-8300 FKanklin 5-5561 INdependence 3-7250 PArkway 1-5253 LOngacre 1-1580 FLeetwood 7-4611 UNiversity 4-1963 Cumberland 3-2761 LOngacre 3-6440 TRinity 8-2700 JUniper 6-5141 PRospect 4-5354 PRODUCTS ACRYLIC PRODUCTS "Lucite" Acrylic Resin (Methacrylate Polymers)-- [CH2C(CHa)COOR],: A series of polymeric esters, of methacrylic acid, in which R is methyl--("Lucite" 41 acrylic resin), ethyl--("Lucite" 42), n-butyl--("Lucite" 44), isobutyl--("Lucite" 45), or 50/50 n-butyl/isobutyl-- ("Lucite" 46). Water-white, transparent, thermoplastic resins in granular form. Densities from 1.19 to 1.05; soluble in a wide variety of polar and nonpolar solvents; compatible with many plasticizers. Excellent outdoor durability; chem ically stable at elevated temperatures; resistant to water, aqueous salt solutions and moderately concentrated acids and alkalies. Us e: Ingredients in lacquers and other finishes; aerosol "snow"; coatings for fabrics and hot melt adhesive compositions; impregnants for leather; modifiers for other resins, such as vinyls. Co n t ain er s : 25- to 250-lb. fiber drums. Methacrylate Monomers--CH2C(CH3)COOR (Where R Is Hydrogen, Methyl, Normal Butyl or Isobutyl): Water-white, mobile, volatile liquids containing a small amount of polymerization inhibitor. Us e: Primarily in manufacture of acrylic polymers for paints and coatings, and as chemical intermediates. Co n t a in e r s : 5-gal. cans, 55-gal. drums, tank trucks, 8,000-gal. tank cars. Methacrylate Polymers: [See "Lucite" Acrylic Resin (Methacrylate Polymers) above). CERAMIC PRODUCTS CERAMIC COLORS Glass Enamels: A series of finely ground fluxes, basically lead borosilicate, intimately blended with colored ceramic pigments. Full range of colors available in paste (mixture of enamel with air drying or thermofluid squeegee medium) or dry form. Different grades give characteristics of acid resistance, alkali resistance, sulfide resistance, or low lead release to meet requirements for various uses. Firing range 1000-T400F. (537.8-760C.). Us e: For fired-on labels and decorations on glassware, tumblers, milk bottles, beverage bottles, glass containers, illuminating ware, architebtuargrass7and~signs. Co n t a in e r s : Dry colors, 25-, 50-, 100-, and 200-lb. fiber drums; paste colors, 100-lb. (5-gal.) steel pails; thermofluid enamels, 200-lb. (20-gal.) steel drums, 50-lb. (5-gal.) steel pails. Gold Colors: Finely ground mixtures of low-melting glasses and gold-base pigments suitable for use over all standard glazes and in porcelain enamels. Firing range 1300-1500F. (704.4-815.6C.); Cones 018-014. Us e : Same as Overglaze Colors, below. Co n t a in e r s : Under 25 lb., cans; 25 lb. or more, 25-lb. (3-gal.) drums. Overglaze Colors: Finely ground mixtures of pigments and low-melting glasses suitable for use over standard glazes. Temperature range 1300-1500F. (704.4815.6C); Cones 018-014. Us e: For bands, decalcomania, and similar decorative designs fired on china, pottery, terra cotta, tile, and other glazed ceramic surfaces. CON TAINERS: 25-, 100-, and 200-lb. drums. ELECTRONIC MATERIALS Conductive Silver Preparations: Specially compounded materials containing silver powder in a suitable vehicle, with or without ceramic flux; can be* coated on base ma terials such as titanate bodies, mica, glass, porcelain, steatite, plastics, wood, cloth, and paper by stencil screen ing (squeegee), spraying, dipping, brushing, roller coating, banding wheel, or other suitable method. Types for air drying, baking at low temperatures, and firing at elevated temperatures. Us e: To produce capacitor electrodes, ce ramic to metal solder seals, electrical shields, surfaces of high conductivity on nonconductive materials; as a base for electroplating on ceramic and nonceramic surfaces. Co n t a in e r s : Paste, qt. and gal. cans; liquid, pt. and gal. bottles. 6 DUP210011362 ELECTROCHEMICALS DEPARTMENT CERAMIC PRODUCTS Golds: Special preparations for applications where re sistance to strong acids and migration is required. Us e: For application on semiconductors (transistors, diodes, etc.), special capacitors, and printed circuits. CONTAINERS: 1-, 3-, 8-, 16-, 24-, and 32-oz, jars. Palladiums and Platinums: Special preparations for application on green ceramic bases that are fired at ex treme temperatures and allow multiple laminations of electroded ceramic sheets. Us e: For capacitors. CON TAINERS: 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. Resistor Compositions: Specially treated semiconduct ing metal powders compounded with glass binders and temporary organic carriers. Can be applied to glass or ceramic surfaces by stencil screening (squeegee), spraying, brushing, or dipping. Firing range 1300-1400F. (700760C.). Resistance of 500 to 10,000 ohms/square obtained with 1-mil film. Fired resistors have good reproducibility, low temperature and voltage coefficients, and stability to abrasion, moisture, and relatively high (257F., 125C.) ambient temperature. Us e: To produce fired-on resistor components for electronic circuits. CONTAINERS: 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. PIGMENTS Body Stains: Finely ground calcined oxide pigments for coloring ceramic bodies. Us e: As colors or designs for tile, terra cotta, chinaware, etc., where the pigment becomes part of the ceramic body. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Enamel Pigments: Finely ground calcined oxide mix tures. Maximum firing temperature 1600F. (871.1C.). Us e: For coloring vitreous enamels for application on sheet steel, cast iron, or aluminum. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. drums. Glaze Stains: Finely ground calcined oxides for use in coloring ceramic glazes. Us e: Coloring glaze coatings for pottery, tile, terra cotta, and similar ceramicware. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Special Pigments for Plastics, Paper and Textiles: Finely ground calcined oxides having good color stability to light and temperature. Us e: For coloring nylon, paper, plastics, and textiles, where special stability is desirable. Available also as wet milled slurries. Co n t ain e r s : 25-, 50-, 100-, and 200-lb. drums. Silver Powder--Ag: Finely divided silver powder, 99+% silver; with or without added flux. Us e: Preparation of Conductive Coating Materials (above). Co n t a in e r s : 5-oz. bottles; qt. and gal. cans. Underglaze Pigments: Finely ground calcined oxides for colored designs beneath the glaze on ceramic surfaces. Us e: For coloring or decorating pottery, tile, terra cotta, and similar unglazed ceramic surfaces. Co n t ain e r s : 25-, 50-, 100-, and 200-lb. fiber drums. FLUXES (FRITS) \ Fluxes: Low-melting glasses. Firing temperatures 9501300F. (510-704.4C.). Us e: To lower fusing tempera PRECIOUS METAL COMPOSITIONS (DECORATIVE) tures of refractory materials. CONTAINERS; 25-, 50-, 100-, Brown Gold (Gold Powders)--Au: Finely divided, dry and 200-lb. drums. preparations containing gold and usually a flux. For dry application by dusting on a tacky surface to produce Porcelain for Aluminum: Vitreous frits which fire at heavy gold deposits which have good stability and long970-1000F. (521.1-537.8C.) for use-on aluminum and wearing qualities. Us e: Decorating china, pottery, tile, ' its alloys. Enamels have relative resistance to impact, etc., with fired-on gold designs; for increasing gold content chemical attack, thermal shock, and salt water corrosion. of other gold preparations. Co n t ain er s : 1-, 3-, 8-, I6-, 24-, Us e: For imparting chemical resistance, dielectric strength, and 32-oz. jars. and color to aluminum and its alloys. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. . Burnish Golds: Finely divided gold powder combined with suitable fluxes and incorporated into low viscosity LUSTERS Luster Colors: Liquids containing resinates or similar organic compounds of various base or precious metals. Us e: For decorating pottery, glass, tile, china, terra cotta, and similar ceramic surfaces with fired-on iridescent coat ings. Co n t ain e r s : Precious metal lusters, 500-g. (1-lb.) bottles; base metal lusters, gal. (7-lb.) bottles. vehicles for brush application. Produce heavy, stable, long-wearing gold deposits. Fire to a matt surface; the true gold surface texture developed by burnishing. Platinum burnishes for white ware are also available. Us e : Decorating high grade china and ceramicware with fired-on gold designs. Co n t a in e r s : 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. Liquid Bright Golds: Liquid compositions suitable for MEDIUMS AND THINNERS application by brushing, stamping, spraying, or stenciling (squeegee). Fire to a bright mirror surface. Us e: Decorating Squeegee Mediums (Squeegee Oils): Specially com pottery, glass, tile, terra cotta, enameled metals, etc., pounded organic vehicles for paste colors applied by stencil with fired-on, bright gold designs. Co n t ain er s : 100- and screen. Us e: As vehicles for paste colors for stencil appli 500-g. bottles. cation on glassware, tumblers, bottles, porcelain enamel, pottery, etc. Co n t a in e r s : 55-gal, drums. Liquid Bright Palladiums or Platinums: Liquid com positions suitable for application by brushing, stamping, Thinners: Essential oils and mixtures thereof for use spraying, or stenciling (squeegee). Fire to a silvery mirror with precious metal preparations. Us e: Thinning and ex surface. Us e: Decorating pottery, glass, tile, terra cotta, tending precious metal preparations used in decorating enameled metals, etc., with fired-on, bright silvery designs. ceramicware. Co n t a in e r s : Lb. bottles. Co n t a in e r s : 100- and 500-g. bottles. 7 DUP210011363 ELECTROCHEMICALS DEPARTMENT CHLORINE PRODUCTS Paste Golds: Heavy compositions of powdered gold and flux suitable for printing by tissue transfer method or can be diluted for brush application. Fire to matt surface which is burnished to develop true gold texture. USE: Decorating high grade chinaware and other ceramic surfaces with gold designs; for decorating ceramicware with encrusted or Roman gold designs. Co n t ain e r s : 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. CHLORINE PRODUCTS "Artie" Methyl Chloride: (See Methyl Chloride, below.) Chloroform (Trichloromethane)--CHCI3: A colorless, sweet smelling liquid; soluble in alcohol and ether; slightly soluble in water. Available in two grades. Co n t a in e r s : 55-gal. drums (660-lb.); tank cars. Hy d r o c a r b o n St a b il iz e d Gr a d e; Boiling range 140.7142.5F. (60.4-61.4C). Weight per gal., 12.43 lb. at 20C. Us e: As a solvent for fats, oils, and other organic compounds; for spotting textiles; as a freezing-point depressant for fire-extinguisher fluids; in the manu facture of dyes and chemicals, e.g., difluorochloromethane. Et h a n o l St a b il iz e d Gr a d e: Boiling range, 20th drop 139.1F. (59.5C.) min.; 95% 142.7F. (61.5C.). Weight per gal., 12.375 lb. at 20C. Us e: As a solvent for fats, oils, and other organic compounds; in the manufacture -of chemicals, dyes, and pharmaceuticals: Methyl Chloride (Chtoromethane, Monochloromethane)--CH3C1: At ordinary temperatures a colorless gas with ethereal odor; slightly soluble in water; soluble in most organic solvents; stable; moderately flammable; high latent heat and other physical properties desirable in re frigerants. Available in Refrigeration Grade and Technical Grade. Boiling range (95%) --12.3 to --10.5F. (--24.5 to --23.6C.). Weight per gal. 7.68 lb. at 20C. Re f r ig e r a t io n Gr a d e ("Ar t ic " Me t h y l Ch l o r id e): Us e: As a refrigerant; as a fluid for thermometric and thermostatic equipment. Co n t a in e r s : 100-lb. cylinders; multiunit tank cars of 15 (1,300 lb. each) tanks. Te c h n ic a l Gr a d e: Us e : As a methylating agent in organic synthesis; as a low temperature solvent; as a solvent and propellent in aerosols. Co n t a in e r s ; 100-lb. cylinders; multiunit tank cars of 15 (1,300 lb. each) tanks; single unit tank cars. Methylene Chloride (Dichlorometharte, Methylene Dichloride)--CH2CI2: A colorless liquid with faintly ethereal odor; practically nonflammable and nonexplo sive. Available in Refrigeration Grade for both solvent and refrigerant uses. Boiling range L03.1-104.5F. (39.540.3C.). Weight per gal. 11.07 lb. at 20C. Us e: As a refrigerant in centrifugal compressors; for chemical syn thesis; as a low temperature heat transfer liquid; as a paint remover; as a cold cleaner; as a solvent for animal and vegetable oil extraction; as a solvent in aerosols; for de waxing of lubricating oils; and as a solvent for cellulose acetates. Co n t a in e r s ; 55-gal. drums (600-lb.); tank trucks; tank cars. Perchlorethylene(Tetrachloroethylene)--CsCI4: Clear, colorless liquid with ethereal odor; practically in soluble in water; soluble in alcohol and ether; nonflam mable and nonexplosive; stable in the presence of moisture. Available in Dry Cleaning Grade and Technical Grade. Boiling range 248.9-251.6F. (120.5-122.0C.). Weight per gal. 13.55 lb. at 20C. Us e: Spotting and dry cleaning fluid; textile cleaning; vapor degreasing solvent; cold cleaner; drying agent for metals and other solids; vermi fuge; as a solvent for rubber, waxes, tar, paraffin, and gums; as a heat transfer medium; for chemical synthesis. Co n t a in e r s ; 55-gal. drums (700-lb.); tank trucks; tank cars. "Perclene" Perchlorethylene: (See Perchlorethylene, above.) Tetrachloroethane (1,1,2,2-Tetrachloroethane, Acet ylene Tetrachloride)--CsH^CU: A clear, very slightly yellowish, heavy liquid; soluble in alcohol and ether; non flammable and nonexplosive; unstable in the presence of moisture; vapors toxic. B, P. approximately 295.3F. (146.3C.). Weight per gal. 13.32 lb. at 20C. Us e: As a solvent in special preparations; in chemical synthesis. Co n t a in e r s : 55-gal. drums (700-lb.). Triehlorethylene--C2HCI3: Clear, colorless liquid with ethereal odor; miscible with alcohol, ether, and most organic solvents; practically insoluble in water; stable in the presence of moisture; practically nonflammable and nonexplosive. Available in four grades. Co n t a in e r s : 55-gal. drums (660-lb.); tank trucks; tank cars. Te c h n ic a l a n d Dr y Cl e a n in g Gr a d e ("Tr ic l e n e" Tr ic h l o r e t h y l e n e): Boiling range 187.9-190.4 F. (86.6-88.0C.). Weight per gal. 12.19 lb. at 20C. Us e: Dry cleaning and spotting fluid; textile cleaning; solvent for adhesives and waxes; asphaltic paint remover; for coating paper; organic reagent. Me t a l De g r ea s in g Gr a d e ("Tr ic l e n e " D Tr ic h l o r e t h y l en e): Boiling range 187.5-190.2F. (86.4-87.9 C.). Weight per gal. 12.16 lb. at 20C. Us e: Specifically stabilized for vapor degreasing of metals; low temperature heat transfer liquid. Pa in t Gr a d e ("Tr ic l en e " Pa in t Gr a d e Tr ic h l o r e t h y l e n e); Boiling range 183.7-190. 2F. (85.4-87.9C.). Weight per gal. 12.14 lb. at 20C. Us e: As a thinner for paints based on several types of alkyd re.sins; on as phaltic materials, including "Gilsonite"; and on some specialty resins, such as certain acrylics, epoxy esters, chlorinated rubbers, ethyl cellulose, etc. Ex t r ac t io n Gr a d e: Boiling range 187.7-189.5F. (86.5-87.5C.). Weight per gal. 12.23 lb. at 20C. Us e: Extraction solvent for many waxes, resins, and alkaloids. Fr e e z in g -p o in t De p r e s s a n t Gr a d e: Weight per gal. 12.21 lb. at 20C. Us e: Freezing-point depressant for fire extinguisher fluids. "Triclene" Trichlorethylene: (See Trichlorethylene.) ELECTROPLATING PRODUCTS Addition Agent 774: Pale amber, slightly viscous water solution of organic wetting agents; faint amine odor; mildly alkaline. Us e: As antipitting agent with "Coppralyte" plating salts; as antifume agent with "Durobrite" zinc plating. Co n t ain er s : 9-lb. bottles (1-gal.), 125-lb. fiber drums. 8 DUP210011364 ELECTROCHEMICALS DEPARTMENT ELECTROPLATING PRODUCTS "Cadalyte" Bright Dip: Clear colorless liquid; corrosive; miscible with water. Diluted with 15-30 parts of water for dipping solution. Us e; To brighten cadmium deposits by "bright dipping;" to add a tarnish-resistant film on surface of cadmium plate. Co n t a in e r s : 5-lb. bottles, 120-lb. car boys. "Cadalyte" Brightener: Light brown, fine powder. Us e: In cyanide cadmium plating baths for maintaining high covering power of bath and brilliancy and uniformity of deposits. Co n t a in e r s : 5-, 25-, and 50-lb. pails and containers. "Cadalyte" Maintenance Compound: Buffcolored, free flowing, fine powder; water soluble. Contains "Cadalyte" Brightener and sodium cyanide in proportions consumed in cadmium plating. Us e: Replenishing "Cadalyte" cad mium plating baths. Co n t a in e r s : 100-lb. steel or fiber drums. "Cadalyte" Plating Salts: Reddish-brown powder con sisting of a mixture of sodium cyanide, cadmium oxide, and brighteners; contains approximately 19.2% cadmium. Free flowing, water soluble, stable. Us e: To prepare a cadmium plating bath which deposits cadmium in a bright, ductile, adherent form on iron and steel to prevent rusting and corrosion. Co n t a in e r s : 50-lb. steel or fiber drums. Carbonate Remover: Fine, white, free flowing powder. Slightly soluble in water. Us e: To remove carbonates from . .cyanide plating solutions. Co n t a in e r s : 100-lb. bags. Copper Cyanide (Cuprous Cyanide)--Cu.(CN)2: A creamy white powder; insoluble in water; soluble in sodium cyanide and potassium cyanide solutions; copper content min. 70%; cyanogen content min. 28.5%. Us e: In copper and brass cyanide electroplating solutions. Co n t a in e r s : 100-lb. packages. Copper Plating Addition Agents: (See Addition Agent 774, "Coppralyte" Addition Agent 1085, "Dacolyte" Addition Agent, and Elchem 1393 and Elchem 1396 Addition Agents.) "Coppralyte" Addition Agent 1085: Pale amber, slightly viscous water solution of organic wetting agents; faint amine odor; mildly alkaline. Us e: As antipitting agent for "Coppralyte" copper plating. Co n t ain er s : 9-lb. bottles (1-gal.), 125-lb. fiber drums. "Coppralyte" Plating Salt--Potassium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 25.4%; free KCN min. 1.25%, max. 3.0%. Us e; For preparing copper plating baths for pro ducing smooth, bright, heavy, adherent coatings of copper on steel die castings, wire, and other parts. Co n t a in e r s : 100-lb. packages. "Coppralyte" Plating Salt--Sodium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 27.0%; free NaCN min. 0.4%, max. 2.0%. Us e: For preparing copper plating baths for produc ing smooth, bright, heavy, adherent coatings of copper on steel die castings, wire, and other parts. Co n t a in e r s : 100-lb. packages. "Dacolyte" Addition Agent: Dark brown, amorphous, fine powder; sharp odor; water soluble. Us e : In acid copper plating solutions for heavy deposits only. Assists in pro ducing smooth copper deposits free from nodules or trees Co n t a in e r s : 5-, 10-, 25-, and 50-lb. fiber containers. "Durobrite" Addition Agent 26: Amber liquid. Us e: As a brightening agent in cyanide zinc barrel plating baths. Co n t a in e r s : 40-lb, pails. "Durobrite" Addition Agent 309: Clear amber liquid containing approximately 10% solids. Us e : Brightening agent for cyanide zinc plating. Improves covering power by extending the bright plating range to low current density areas. Co n t a in e r s : 40-lb. steel pails. Elchem 1393 Addition Agent: Grayish-white powder containing potassium cyanide and selenium; slightly hygro scopic, water soluble, stable. Us e: As a brightening agent in cyanide copper plating baths. Co n t a in e r s : 25- and 100-lb. fiber containers. Elchem 1396 Addition Agent: Dark amber liquid; mildly alkaline. Us e: As a brightener and antipitting agent in cyanide copper plating baths. Co n t a in e r s : 40-lb. pails; 125-lb. packages. Elchem 1442 Addition Agent: Mildly alkaline solution containing potassium cyanide and selenium. Us e: As a brightening agent and leveling agent in cyanide copper plating baths. Co n t a in e r s : 40-lb. pails; 450-lb. drums. Electropolishing Solution: A clear, dark amber, cor rosive liquid; glycolic acid-sulfuric acid formulation; acid content 85%; F.P. below 32F. (0C.); nonflammable and nonexplosive; miscible with water. Us e: In electropolishing stainless steel over a wide current density range. Co n t a in e r s : 162-lb. carboys. Halogen Tin Addition Agent 2 Special: Clear colorless liquid; miscible with water; stable. Us e: In Halogen Tin Plating Process for brightening and controlling deposit. Co n t a in e r s : 420-lb. lined drums. Halogen Tin Plating Process: An acid tin plating process, using bivalent tin salts and tin anodes. Us e: For continuous tin plating on steel strip, and copper or steel wire. Bath permits high current densities and rapid plating. Polysulfide: A sodium sulfuret similar to Liver of Sulfur, having a sodium base instead of a potassium base. Yellow to yellow-green powder; sodium polysulfide content min. 56%; total sulfur min. 50.7%. Us e: For coloring copper and brass; for stripping copper plated deposits; for purify ing cyanide plating solutions. Co n t a in e r s : 60-lb. cases (six 10-lb. tins), 100-lb. drums. Potassium-Copper Cyanide Double Salt: White crys talline complex salt of copper cyanide and potassium cya nide. Us e; For preparing and maintaining cyanide copper plating baths based on potassium cyanide. Co n t a in e r s : 100-lb. drums. Potassium Cyanide: (See Page 12.) 9 DUP210011365 ELECTROCHEMICALS DEPARTMENT FURAN PRODUCTS AND PEROXYGEN PRODUCTS Sodium-Copper Cyanide Double Salt: White crystalline complex salt of copper cyanide and sodium cyanide. Us e: For preparing and maintaining cyanide copper plating baths based on sodium cyanide. Co n t a in e r s : 100-lb. fiber drums. Sodium Cyanide: (See Page 12.) Sodium Sulfocyanide: (See Page 12.) Zinc Cyanide--Zn(CN)?: Stable white powder; soluble in alkalies, sodium and potassium cyanide solutions, and in dilute mineral acids with production of hydrogen cyan ide. Insoluble in water and alcohol; decomposes on heating. Zinc content min. 55%; cyanogen content min. 40%. Us e; In zinc and brass electroplating solutions; as a chemi cal reagent. Co n t a in e r s : 100-lb. packages. Zinc Plating Addition Agents: See "Durobrite" Addi tion Agent 26, "Durobrite" Addition Agent 309, "Zin-OLyte" Addition Agent O, and "Zin-O-Lyte" Brighteners. "Zin-O-Lyte" Addition Agent O: A heavy gray powder containing molybdenum; soluble in caustic soda solution; insoluble in water. Us e: In make up and maintenance of bright zinc plating baths prepared with "Zin-O-Lyte" salts. CONTAINERS: 5-, 25-, and 50-lb. fiber containers. "Zin-O-Lyte" Brighteners: Organic addition agents; fine powder; water soluble. Us e: In cyanide zinc plating baths to increase deposit brightness and current efficiencies of the bath and widen the bright current density range. Co n t a in e r s : 50- and 100-Ib. packages. "Zin-O-Lyte" Salts: Fine white powder containing sodium cyanide and other chemicals in proportions re quired for the "Zin-O-Lyte" zinc plating bath. Us e: In preparing "Zin-O-Lyte" zinc plating baths for still or barrel operation. Co n t a in e r s : 100-lb. steel or fiber drums. "Zin-O-Lyte" Special Zinc Barrel Brightener: Organic addition agent; fine powder; water-soluble. Us e: In cyanide zinc barrel plating solutions to increase deposit brightness and current efficiencies. Co n t a in e r s : 50- and 100-lb. containers. FURAN PRODUCTS 1,4-Dichlorobutane (Tetramethylene Chloride, DCB) --CI(CH2),CI:A colorless liquid with mild, pleasant odor; miscible with most organic solvents; practically insoluble in water. Boiling range 307.4-312.8F. (153-156C.); F. P. --35.1F. (--37.3C.); flash point (TAG Closed Cup) 104F. (40C.); Sp. Gr. 1.135-1,141; weight per gal. 9.46 lb. Us e: Reactive chlorine atoms permit its use in organic syntheses. Co n t a in e r s : 9-lb. (1-gal.) containers; 45- and 500-lb. drums; tank cars. Furan (Furfurane)--(CH)40: A highly volatile, colorless liquid, miscible with most organic solvents; slightly soluble in water. Boiling range 80.6-89.6F. (27-32C.); F. P. -- 122.2F. (--85.68C.); flash point (TAG Closed Cup) --32F. (--35.6C.); Sp. Gr. 0.935-0.938; weight per gal. 10 7.8 lb.; stabilized with 0.05% hydroquinone. Us e; Furan is highly reactive by either substitution or addition. Lends itself to pharmaceutical and industrial syntheses. Co n t a in e r s : 7-lb. (1-gal.) containers; 35- and 400-lb. drums; tank cars. Tetrahydrofuran (Tetramethylene Oxide, THF) -- (CH2)40 : A clear, colorless liquid with ether-like odor; readily miscible with organic solvents and water. Boil ing range 149-152.6F. (65-67C,); F. P. -- 163.3F. (--108.52C.); flash point (TAG Closed Cup) 6F. (--14.5 C.); Sp. Gr. 0.885-0.888; weight per gal. 7.4 lb.; stabilized with 0.025% BHA (butylated hydroxyanisole); other stabilizers available. Us e: Excellent solvent for high molecular weight polyvinyl chloride resins and vinylidene chloride copolymers for coatings, films, adhesives, printing inks, etc.; unique reaction solvent for carrying out Grignard, sodium acetylide, and reduction reactions, including hydro genations; component in paint remover and cold cleaner formulations; chemical synthesis; and extraction processes. CONTAINERS: 7-lb. (1-gal.) containers; 35- and 400-lb. drums; tank trucks; tank cars. PEROXYGEN PRODUCTS "Albone" Hydrogen Peroxide: (See Hydrogen Peroxide, below.) Calcium Peroxide--Ca02: Cream colored powder con taining Ca02 and CaO; Ca02 content min. 75%; active oxygen content min. 16.65% by weight. Liberates oxygen slowly in water suspensions; decomposed by heat; insoluble in alcohol, ether, and ammonia; soluble in weak acids or ammonium salt solutions. USE: In manufacture of pharma ceutical and cosmetic preparations; general oxidation appli cations. Co n t ain e r s : 25- and 100-lb. fiber drums. Hydrogen Peroxide--H202: Colorless, clear liquid; slightly sharp odor; miscible in all properties with water; liberates oxygen when decomposed. "Al b o n e" 35 Hy d r o g en Pe r o x id e : H202 content 35% by weight; active oxygen 16.5% by weight; weight per gal. 9.44 lb. at 20C.; density 1.133 at 20C.; pH (Beckman meter) 3.4-3.8. Us e: Bleaching of textiles such as cotton, wool, silk, rayon, linen, and blends of these fibers with synthetic fibers; bleaching of wood pulps such as cold soda, groundwood, kraft, sulfite, and recovered pulp; bleaching of practically all vegetable and animal fibers, fur, straw, etc.; fur carroting; puri fication of metals solutions; treatment and sterilization of starch, glue, etc.; bleaching of wood panels and furniture; bleaching of oils and fats; oxidation of vat dyes; dilution for pharmaceutical and cosmetic uses; general oxidizing reactions, and for the manufacture of alkaline earth peroxides and organic peroxides such as methyl ethyl ketone peroxide; in epoxidation and hydroxylation reactions; as a polymerization catalyst for unsaturated monomers such as butadiene, styrene, etc.; as a viscosity control agent for starch and cellulose derivatives; in electroplating; as a gasifying agent for manufacture of such materials as foam rubber. Co n t a in e r s : 120-lb. carboys; 250-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4,000-, 6,000-, and 8,000-gal. tank cars. DUP210011366 SODIUM AND CYANIDE PRODUCTS Hydrogen Peroxide (Continued) "Al b o n e " 50 Hy d r o g en Pe r o x id e : H2Oa content 50% by weight; active oxygen 23.5% by weight; weight per gal. 9.98 lb. at 20C.; density 1.196 at 20C.; pH (Beckman meter) 2.4-2.7. Us e : Same as "Albone" 35, above. Co n t a in e r s : 265-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4.000-, 6,000-, and 8,000-gal. tank cars. Hy d r o g en Pe r o x id e 70%: HOj content 70% by weight; active oxygen 33% by weight; weight per gal. 10.7 lb. at 25C. ; density 1.288 g./cc. at 20C.; pH (Beckman meter) approx. 1.1. Us e: In organic syntheses where minimum water content is required. Co n t ain er s : 285-lb. double compartment drums; 275-lb. single com partment drums (for carload or truckload shipment only); 4,000-, 6,000-, and 8,000-gal. tank cars. Hy d r o g en Pe r o x id e 90%: H*Os content 90% by weight; active oxygen 42.3% by weight; weight per gal. 11.61 lb. at 20C.; density 1.3913 g./cc. at 20C. Us e: Monopropellent and fuel oxidant. Co n t a in e r s : 285-lb. double compartment drums; 275-lb. single compartment drums (for carload or truckload shipment only); 4,000-, 6.000-, and 8,000-gal. tank cars. "Pe r o n e" 35 Hy d r o g e n Pe r o x id e: Physical properties similar to those of "Albone" 35, above. Us es : In elec tronic applications and other specialty uses. Co n t a in er s : 120-lb. carboys; 250-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4.000-, 6,000-, and 8,000-gal. tank cars. "Pe r o n e " 50 Hy d r o g e n Pe r o x id e : Physical properties similar to those of "Albone" 50, above. Us es : In elec tronic applications and other specialty uses. Co n t a in er s : 265-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4,000-, 6,000-, and 8.000-gal. tank cars. "Oxone" Mono persulfate Compound: An acidic, white, granular, free flowing solid containing the active ingredient potassium peroxymonosulfate; readily soluble in water; 1% solution has pH of 2-3. Minimum active oxygen content 4.5%. Strong oxidizing agent. Us e: For manufacture of dry laundry bleaches, detergent-bleach washing com pounds, scorning powders, plastic dishware cleaners, and metal cleaners; preparation of hair wave neutralizers and pharmaceuticals; general oxidizing reactions. Co n t a in e r s : 50-lb. multiwall bags. Sodium Perborate Tetrahydrate--NaBOa'iHaO: Tech nical and N. F. Grades. An alkaline, white powder, soluble in water and acid solutions; in water, gives slightly alkaline solution containing hydrogen peroxide and borate; active oxygen content min. 10%; sodium perborate content min. 96.2%; Technical Grade passes 20 mesh screen. Us e: Bleaching textiles; oxidizing agent for vat colors; assistant to textile detergents; constituent of dentifrices and phar maceuticals ; ingredient in dry laundry bleach powders and plastic dishware stain removers; polymerization catalyst. Co n t a in e r s : 100-lb. multiwall bags; 250-lb. fiber drums. Sodium Peroxide--NaaOs: Pale yellow, beadlike solid; stable when dry; readily dissolves in cold water to form alkaline hydrogen peroxide solution. NaaOa content min. 96%; active oxygen content approximately 20% by weight. Te c h n ic a l Gr a d e ("So l o z o n e " So d iu m Pe r o x id e DFF): Dustless, free flowing; bulk density approx. 95 lb./cu. ft.; melting point above 450C.; in water solution releases 103% of its weight as caustic soda. Us e: Bleaching of wood pulps such as groundwood, cold soda, kraft, sulfite, and recovered pulp; bleaching cotton knit goods; purification of metal salts; manu facture of inorganic and organic peroxides such as benzoyl peroxide; general oxidizing agent. Co n t a in e r s : 75-lb. pails; 400-lb. drums. Ca l o r if ic Gr a d e: All passes 28 mesh. Meets A. C. S. specifications. Us e: For calorific determinations. Co n t a in e r s : 65-lb. pails. "Solozone" Sodium Peroxide: (See Sodium Peroxide.) Zinc Peroxide--ZnOa: Fine, grit free, white powder com posed of zinc peroxide and zinc oxide; ZnOa content min. 57.82%; active oxygen content min. 9.5% by weight. Technical Grade. Insoluble in water; dissolves readily in acid media to form hydrogen peroxide solution. USE: For manufacture of deodorants, dusting powders, ointments, bleaching creams, and foot powders. Co n t a in e r s : 100-lb. drums. SODIUM AND CYANIDE PRODUCTS Case Hardener: (See Cyanide Mixtures.) Copper Cyanide: (See Page 9.) "Perdox" Sodium Borate Perhydrate: A free flowing, white powder; dissolves readily in water to produce mildly alkaline peroxide solution. Equivalent NaB03-H20 content min. 96.6%; active oxygen content min. 15.5%. Us e: For preparation of dentifrices and hair wave neutralizers; bleaching; oxidation of dyes; stain remover for plastic dishes. Co n t a in e r s : 125-lb. fiber drums. "Perone1' Hydrogen Peroxide: (See Hydrogen Peroxide.) Sodium Borate Perhydrate: (See "Perdox" Sodium Borate Perhydrate, above.) Cyanide-Chloride Mixtures 75%, 45%, and 30%: (See Cyanide Mixtures.) Cyanide Mixtures (Cyanide-Chloride Mixtures, Case Hardener): White fused slabs 3 in. x 1?<( in. x 1 in. (ap proximately 3 oz.) or granular form. Us e: Case hardening of steel. Co n t a in e r s : 100-lb. cases (containing twenty 5-lb. steel, ten 10-lb. steel, or four 25-lb. fiber containers); 100- and 200-lb. steel drums. 75% Cy a n id e -Ch l o r id e Mix t u r e: Sodium cyanide content min. 75%, sodium chloride min. 12%, sodium carbonate max. 13%. F. P. approx. 1094F. (590C.); Sp. Gr. 1.74 at 77F. (25C.), 1.26 at 1580F. (860C.). u DUP210011367 ELECTROCHEMICALS DEPARTMENT VINYL PRODUCTS Cyanide Mixtures (Continued) 45% Cy a n id e -Ch l o r id e Mix t u r e : Sodium cyanide content min. 45%, sodium chloride min. 45%, sodium carbonate max. 10%. F. P. approx. 1247F. (675C.); Sp. Gr. 1.91 at 77F. (25C.), 1.37 at 1580F. (860C.). 30% Cas e Ha r d e n er : Sodium cyanide content min. 30%; sodium chloride min. 25%, max. 35%; sodium carbonate max. 45%. F. P. approx. 1090F. (587C.); Sp. Gr. 2.12 at 77F. (25C.), 1.52 at 1562F. (850C.). "Cyanobrik" Sodium Cyanide: Briquette form. (See Sodium Cyanide 97%, below.) "Cyanogran" M Sodium Cyanide: Granular form. (See Sodium Cyanide 97%, below.) Hydrogen Cyanide (Hydrocyanic Acid; Prussic Acid) --HCN: A clear, colorless liquid containing 99.5% min. HCN. Odor of bitter almonds. Vapors extremely poisonous. Miscible with water and most organic solvents. Spec. gr. 0.714 at 5C,, 0.695 at 18C.; b.p. 25.7C.; f.p. --13.3C. Us es : Chemical syntheses. Co n t a in e r s : 5,000-gal. tank - - - --- cars............... Potassium--K: Soft silvery metal; extremely reactive; M.P. 147 F. (63.7C.); B.P. 1400F. (760C.). Available in Vi-oz. sticks (1 ;Vg in. x 1 in.) and 1-, 2Jk j -, and 4j^-lb. bricks. Us e: Laboratory reagent; preparation of inorganic potassium compounds such as oxide, peroxide, or cyanide; in organic reactions involving condensation, dehalogenation, reduction, and polymerization. Co n t a in e r s : 1-lb. tins (boxed) with inside glass bottles containing lA-oz. sticks; 25-lb. pails of bricks. Potassium-Copper Cyanide Double Sait: (SeePage9.) Potassium Cyanide--KCN: A white, granular, poisonous chemical; contains 98% min. potassium cyanide. USE: In high speed copper and silver plating processes; with sodium cyanide for cyanide nitriding. Co n t a in e r s : 100-lb. steel drums. Sodium--Na: A silvery white metal; soft and ductile; extremely reactive; M. P. 208F. (97.8C.); B. P. 1638F. (882C.); weight at M. P. 59.4 lb./cu. ft. (solid); inert toward dry petroleum ether, toluene, kerosene, naphtha, and other hydrocarbon liquids but reacts vigorously with water. Supplied in 1-, 2J4-, 5-, and 12)4-lb. bricks; contains 0.04% calcium max. and 0.005% chloride max. Us e: In manufacture of indigo and dye intermediates, chemicals, perfumes, and drugs; as a "scavenger" and deoxidizer in metal melting and refining; metal descaling; and as a heat transfer medium. Co n t a in e r s : 50-lb. cases (two 25-lb. pails of 1- or 2} j-lb. bricks), 100-lb. cases (ten 10-lb. tins of 234-lb. bricks), 220-, 280-, and 290-lb. drums (1-, 2) 9-, 5-, or 123.o-lb. bricks), 400-lb. nonreturnable drums (fused sodium), and 78,000-lb. tank cars. Sodium-Copper Cyanide Double Salt: (See Page 10.) Sodium Cyanide 97%--NaCN: A white solid fused in 1-oz. briquettes ("Cyanobrik" sodium cyanide) and in granular form ("Cyanogran" M sodium cyanide): M. P. 1040F. (560C.); B. P. 2732F. (1500 C.). Sodium cyanide content--97% min. Us e: Heat treating of steel; m eiectro- plating; in cleaning of metal, including neutralizing after pickling; in fumigation; unhairing of hides; for manu facture of indigo, dye intermediates and other chemical compounds; in the extraction of gold, silver, zinc, and lead from ores. Co n t a in e r s : 100- and 200-lb. drums. Sodium Monoxide--Na20: Light gray, fine, spherical particles. Usually contains a small amount of free sodium (l%-2%) and may contain a small amount of sodium peroxide (l%-2%.) Us e: As a condensing or polymerizing agent in organic reactions; as a dehydrating agent. Co n t a in e r s : 60-lb. pails; 350-lb. steel drums. Sodium Sulfocyanide (SodiumThiocyanate)--NaCNS: Available in anhydrous form and as solution. Us e: In electroplating, textile printing, processing of color film, preparation of sulfocyanide compounds. An h y d r o u s : Grayish-white granules; NaCNS content min. 98%; soluble in water and alcohol; M.P. 549"F. (287C.). Co n t a in e r s : 25- and 100-lb. fiber drums. So l u t io n : Aqueous solution of high purity; colorless; NaCNS content min. 47% (sold on basis of 100% NaCNS). Co n t a in e r s : 500-lb. steel drums. Zinc Cyanide: (See Page 10.) VINYL PRODUCTS "Elvacet" Polyvinyl Acetate Emulsion: Viscous, milkwhite water dispersions of polyvinyl acetate or of copoly mers of polyvinyl acetate which can be diluted with water. Films or coatings formed by the evaporation of water are thermoplastic, grease resistant and, in some cases, water resistant; they exhibit excellent adhesion to a wide variety of materials. The emulsions possess the desirable properties of high solids content at workable viscosity and ease of application from a water medium which eliminates the need for expensive and flammable solvents. Weight per gal. approx. 9.2 lb. "Elvacet" is available in the following grades: Grade Type Viscosity of Emulsion (Brookfield) poises Solids Content 80-900 81-900 81-1600 81-3300 84-1100 1423 1440 Homopolymer Homopolymer Homopolymer Homopolvmer Homopolymer Copolymer Homopolymer 8-10 8.5-10 15-17 30-35 9-13 9-15 8-15 55% min. 55% min. 55% min. 55% min. 54%-56% 55% min. 54%-56% USE: Paint vehicles; adhesive base materials for cellophane, wood, paper, cloth, ceramics, leather, cork, and metals; binders for paper pulp, sawdust, leather scrap, sand, clay, nonwoven fibers, pigments, and cement; textile finishes and sizes; paper coatings for greaseproofing and heat-sealing. Co n t ain er s : 45-lb. steel pails; 500-lb. steel drums; 500-lb. fiber drums; 19,000- to 32,000-lb. tank trucks; 37,000- and 75,000-lb. tank cars. 12 DUP210011368 ELECTROCHEMICALS DEPARTMENT VINYL PRODUCTS "Elvacet" Polyvinyl Acetate Solution ("Elvacet" size on paperboard for high gloss printing; wet strength 60-06) i Colorless, odorless synthetic resin available as a paper laminating adhesive; nonblocking, remoistenable 60% solution in methanol. The resin is thermoplastic, adhesive; adhesive and binder for leather, cloth, nonwoven stable to light and heat, soluble in a number of organic fabrics, and paper; pigment binder; temporary protective solvents and compatible with many resins and plasticizers. coatings; molded products; emulsifying agents; emulsion Because of its strong adhesion to most types of surfaces, stabilizer and thickener; photosensitive films; chemical and excellent heat-sealing properties, polyvinyl acetate is intermediate. Co n t ain er s : 10- and 25-lb. fiber cartons; widely used in adhesive and binder applications. Us e : Ad 50-lb. multiwall bags; 100-lb. fiber drums. hesive and binder; vehicle for metallic pigments; protective coatings on metal; heat-seal applications; greaseproofing; stiffening and permanent sizing. Co n t a in e r s : 38-lb. pails, 400-lb. drums. "Elvax" Vinyl Resins: Highly wax-compatible, amor phous polymers. Translucent, white, Y'' diameter, freeflowing pellets. Supplied in two basic compositions--one "Elvanol" Polyvinyl Alcohol: Water-soluble synthetic resin; white to creamy-white powder; odorless; pH 6-8; density 1.21-1.31 at 20C. Available in 8 grades covering various degrees of hydrolysis in three viscosities (high, medium, and low). for hot-melt adhesive and coating formulation, the other for toughening waxes. Viscosities (at 30C., 0.25% in toluene) 0.77 cp. and 0.85 cp., respectively. Readily soluble in waxes, various low molecular weight resins, and rosin esters; insoluble in aqueous mixtures and most polar sol vents; density at 30C., 0.95; extensibility 700% at break. Viscosity of 4% Water Us es : As a wax additive, improves toughness, reduces Grade 72-60 . .... 72-51 . .... Solution at 20C. (cp) 55-65 45-55 % Hydrolysis 99 -100 97.7- 98.4 flaking, improves heat-seal bond strength. "Elvax"-wax coatings used for improved wax overwrap and tough, heatsealable, sheet-waxed carton-board which retains low moisture vapor transmission, even after creasing. In lami nating formulations for paper to paper and paper to 50-42 . .... 35-45 87 - 89 cellophane, polyethylene, polystyrene, "Mylar" Polyester 71-30 . .... 71-24 . .... 52-22 . .... 28-32 23-28 21-25 99 -100 97.7- 98.4 87 - 89 Film, or other plastic films, and to metal foils; as a base for hot-melt adhesives; as a low dielectric component in potting compounds. Co n t a in e r s : 50-lb. bags. 70-05 .. .... . . . 4-6 51-05 . .... 4-6 l 99 -100 88 - 89 Vinyl Acetate--CHaCOOCH = CH2 : An extremely pure monomer for polymerization or copolymerization reactions. A flammable, volatile, highly reactive liquid with a Polyvinyl alcohol solutions are stable over long periods of pleasant odor. As shipped, it is stabilized with hydro- time. Films and coatings from these solutions are exceed quinone or phenothiazine. Boiling range 72.3-73.0C. ingly tough, colorless, unaffected by all oils, greases, fats, (162.1-163.4F.); Sp. Gr. 0.9335-0.9345. Us e: Monomer hydrocarbons and most organic solvents, and possess a high for polymerization or copolymerization reactions employ degree ofimpermeability to gases and air. Us e : Textile warp ing suspension, emulsion, or solution techniques; chemical size; size for nylon and rayon knitting yams; pigmented intermediate. Co n t ain er s : 375-lb. steel drums; 4,000-gal. paper coating binder; greaseproofing paper; paper size; top tank trucks; 8,000- and 10,000-gal. tank cars. i 13 DUP210011369 EXPLOSIVES DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES: Explosives Sales: Birmingham 13, Alabama Chicago 46, Illinois Denver 2, Colorado Duluth 2, Minnesota Huntington 1, West Virginia Joplin, Missouri New York 1, New York Pittsburgh 22, Pennsylvania Seattle 1, Washington No. 9 Office Park, Mountain Brook 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) Midland Savings Building, 444 Seventeenth Street Hartley Building, 742 East Superior Street West Virginia Building, Fourth Avenue and Ninth Street First National Building, 402 Main Street 4700 Empire State Building, 350 Fifth Avenue One Gateway Center 1127 Washington Building TRemont 9-0466 ORchard 5-1010 MAin 3-1253 RAndolph 4-8593 JAckson 5-5124 MAyfair 4-5060 LOngacre 3-6400 ATlantic 1-7777 MAin 3-8830 Chemical Sales: Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 46, Illinois Cleveland 20, Ohio Houston 27, Texas Los Angeles 58, California New York 1, New York 140 Federal Street 427 West Fourth Street 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 11900 Shaker Boulevard 3202 Weslayan Street 2930 East 44th Street 4700 Empire State Building, 350 Fifth Avenue ' HAncock 6-1 724 FRanklin 5-5563 ORchard 5-1010 LOngacre 1-5070 MOhawk 7-9197 LUdlov 2-6464 LOngacre 3-6400 PLANTS: Na me o f Pl a n t Barksdale Belin . Birmingham Carl Junction Carneys Point Du Pont Louviers Pompton Lakes Potomac River Repauno Seneca Ra il w a y St a t io n Barksdale, Wisconsin Moosic, Pennsylvania (L.C.L.) "i Hillside Junction, Pennsylvania > (C.L.&L.C.L.)J Mineral Springs, Alabama Carl Junction, Missouri Carneys Point, New Jersey DuPont, Washington Louviers, Colorado Pompton Lakes, New Jersey Martinsburg, West Virginia Gibbstown, New Jersey Seneca, Illinois Ma il Ad d r e s s Barksdale, Wisconsin Moosic, Pennsylvania Watson, Alabama Carl Junction, Missouri Penns Grove, New Jersey DuPont, Washington Louviers, Colorado Pompton Lakes, New Jersey Martinsburg, West Virginia Gibbstown, New Jersey Seneca, Illinois EXPLOSIVES SALES PRODUCTS " In d ic a t es Re s al e Pr o d u c t s BLASTING SUPPLIES AND ACCESSORIES Blasting Caps: Small aluminum cylinders, closed at one end and loaded with a charge of fulminating compound, which is exploded fay the spit or sparks from safety fuse. Furnished in two strengths: No. 6 and No. 8; No. 8 being the stronger. Us e : For firing high explosives with safety fuse. Co n t a in e r s : 10, 25 and 100 caps per box. Blasting Caps, Electric: No. 6 and No. 8 strengths, designed to be exploded by electric current. Nylon plastic insulated copper or iron wires. Lengths of wires range from 4 ft. up for copper and from 4 to 20 ft. for iron. Us e: For firing high explosives electrically. Co n t a in e r s : 25 and 50 per carton. Blasting Caps, "Acudet" Electric Delay: Similar to electric blasting caps but having time intervals of 2 75 to 1100 milliseconds (approximately) between periods. Us e: For shots to be fired in rotation with a single set of wiring and with one application of electric current. Co n t a in e r s : 25 and 50 per carton. Blasting Caps, Electric MS Delay: Similar to delay blasting caps but having time intervals of 25, 50 or 100 milliseconds (approximately) between periods. Co n t a in er s : 25 and 50 per carton. Blasting Caps, Electric "SSS" Seismograph: (See "SSS" Seismograph Electric Blasting Caps.) 14 DUP210011370 EXPLOSIVES DEPARTMENT `Blasting Galvanometer: A small direct reading ohmmeter contained in a leather case. Us e: To determine resistances of electric blasting caps, electric squibs, leading wire and the completed blasting circuit. `Blasting Machines: Used for the generation of current for the firing of electric blasting caps, electric squibs, etc. Types of machines are as follows: Rated Capacity Str. Par. Par. Series Series `CD-12-1......................... NR NR 30 `CD-32-1......................... 30 480 125 `CD-48-1......................... 60 1200 200 `No. 10 Twist.................... NR NR 10 `Permissible Multiple Type NR NR 10 `Permissible Multiple Type NR NR 20 `Pushdown No. 30 . . , NR 150 30 `Pushdown No. 50 . . . NR 250 50 NR =Not Recommended `Blasting Switch: Used for the power firing of blasts. Especially designed from the standpoints of safety and reliability. `Cap Crimper (No. 4): Makes waterproof crimp on a cap when a smooth surface fuse is used. Equipped with fuse cutter. `Cap Crimper, Superior: Bench type cap crimper which produces waterproof crimp. Hand or foot operated. Equipped with fuse cutter. . `Connecting Wire: No. 20 and No. 22 gauge copper wire with plastic or paraffin coated cotton insulation. Us e: To connect an electric blasting cap of one hole to another hole when the attached wires are not long enough. Detonators (Fuses and Primers): (See Blasting Caps.) "Elcord" Delay Units: Employed with "Nitramon" Sin seismic prospecting. Permit matching ground velocities in the range 5,000-10,000 ft. per sec. Us e: To minimize "ghost" reflections and improve signal-to-noise ratio, `Fuse Lighters Hot Wire: Similar to toy sparkler. Has black powder composition on an iron wire. `Ignitacord and Thermalite Ignitacord: Cordlike materials which burn with a hot external flame. Used for igniting fuse so as to obtain rotational firing. Lead Spitter: A tube of lead filled with black powder. Master: Device for lighting two to six fuses simul taneously. `Quarrycord: Similar to Ignitacord but specially con structed to bum at a speed of about one foot per second. Used for igniting fuse in multiple blockhole secondary blasting with the added feature of remote firing. Ideal "Fuse Lighters (Continued) for use in thunderstorm season and not affected by stray currents. Safety Match: Short paper tube coated at one end with match composition. The lighter is slipped over end of fuse and ignited by a match or striking with match box cover. Jet Tappers: Shaped charges for tapping open-hearth steel furnaces. Co n t a in er s : 20 per carton. `Leading Wire: No. 16 gauge solid copper wire, insulated with plastic or rubber composition (waterproof) or cotton coated with paraffin (dampproof). Us e: As connecting source of electric current to blasting cap circuit. Co n t a in er s : 125-, 250- and 500-ft. lengths. `Portable Magazines: Sectional steel construction; made in various sizes from 5 to 40 ton capacity. Us e: For storing high explosives, blasting powder and blasting caps. t"`Primacord" Detonating Fuse: Consists of a fabric tube about 0.21 in. in diameter, filled with pentaerythrite tetranitrate (PETN), a high explosive. Detonates with plain or electric blasting cap at a velocity of 20,300 ft. per second. Fourtypes: Plain, Reinforced, Plastic Reinforced and Plastic Wire Countered. Us e: For firing large blasts and deep well drill holes. Co n t a in e r s : Spools containing 500 or 1,000 ft. ("Primacord" MS Connectors: Device for insertion into "Primacord" lines. Us e: To provide delays of approxi mately 0.005, 0.009 or 0.017 second. Co n t a in e r s : 50 per tube, 500 per carton. `Rheostat: An electric resistance bridge, having six bind ing posts and five different units of resistance wire between. Us e: To determine when a given blasting machine is work ing at its rated capacity. `Safety Fuse (Bickford's Fuse): Consists of a core of A type black powder enclosed in several wrappings of jute and cotton threads with waterproofing asphalt type layers between the wraps. Many different types and brands are available. Us e: For single blasts with black powder; for firing other explosives in conjunction with a blasting cap. `Sectioning Switch: Used as a safety switch in blasting lines for power firing circuits. Squib, Electric: An aluminum cylinder containing a deflagrating charge ignited by an electric current. Us e : For firing pellet and blasting powder electrically. "SSS" Seismograph Electric Blasting Caps: Us e: Especially developed for shooting explosive charges in oil prospecting. No time lag between severance of bridge wire and firing of the cap. CONTAINERS: 5, 10, 25 and 50 per carton depending on wire length. `Tamping Bags: Heavy kraft paper bags, glued with waterproof cement; sizes from 114 to 7 in. in diameter and 8 to 24 in. in length. Us e: To hold sand, clay,-etc., for stemming (confining) the charges of explosives in bore holes. Co n t a in e r s : Bale lots of 5,000. ^Trademark of The Enaign-Bickford Company. 15 DUP210011371 EXPLOSIVES DEPARTMENT *Voltohmeter: A combined blasting galvanometer, stray current detector and AC-DC voltmeter. Us e: Serves the same purposes as the Blasting Galvanometer and offers a means for guarding against stray currents of a magnitude which would be hazardous in electric blastings. It also offers a means of checking line voltages in power blasting circuits. EXPLOSIVES Black Sporting Powder: A uniformly dense black powder manufactured in four granulations--Fg, FFg, FFFg and FFFFg ranging respectively from coarse to fine. Us e: The Fg or coarse grain is used for loading large capacity car tridges; the FFg or intermediate grain for medium capacity cartridges and the FFFg, FFFFg or fine grain for small capacity cartridges or general shotgun shooting. Co n t a in e r s : Each size is packed in 1-lb. metal canisters and 25-lb. metal kegs. Blasting Gelatin (S.N.G.): Solidified nitroglycerin. A rubbery, elastic substance, resembling printers' rolls or art gum in appearance. It is the strongest commercial explosive. Us e: In shooting oil wells. Co n t a in e r s : 28.5-lb. (10-qt.) and 57-lb. (20-qt.) cases, 50-lb. cases for use other than in oil wells. Blasting Powder (Saltpeter or A Blasting Powder): A composition of potassium nitrate, charcoal and sulfur. Available in a wide range of grain sizes. Us e : For fireworks; for blasting dimension stone and architectural stone; for quarrying slate; used in safety fuses. Co n t ain er s : 25-lb. kegs. Blasting Powder (Soda or B Blasting Powder): A composition of sodium nitrate, charcoal and'sulfur. Avail able in a wide range of grain sizes. Us e: For coal mining (principally); for construction work when dry; for day mining and open pit ore mining. Co n t a in e r s : 25-lb. kegs. Ditching Dynamite: A 50% straight dynamite, espe cially packed so that it will have the greatest possible uniformity, cartridge for cartridge, and will give the best results in propagation ditching. "Extra" Dynamite: Ammonia dynamites ranging from 115 to 172 cartridges (1J4 x 8 in.) per 50-lb. case. Available in both "high" and "low" velocity types. Us e: In mining soft ores, limestone, gypsum, salt, clay, etc. In quarrying as top loads in well drill holes and as blockhole charges in secondary blasting. Gelatin Dynamite (Straight Gelatin): A plastic, highly water resistant, dense explosive furnished in grades from 20 to 90% strengths. Us e: For blasting in wet boreholes; for submarine blasting and blasting in quarries; for tun neling, shaft sinking and mining hard, tough materials. "Gelex" Dynamites: Semigelatin dynamites having plasticity and water resistance between the dynamites and true gelatins. Us e: In mining metallic ores, gypsum, lime stone and in quarrying. Gypsum A Dynamite: A modified "Extra" dynamite. Us e: Especially designed for mining gypsum. 16 "Hi-Cap" Dynamite: A series of low cost ammonia dynemites, ranging from 120 to 150 cartridges per 50-lb. case in the U'4 x 8 in. size. Us e: In mining and quarrying the softer ores and materials such as limestone, gypsum, salt, clay, etc. "Hi-Velocity" Gelatin: A low density straight gelatin which has the property of always exploding at a ver3' high velocity. This is not the case with most gelatins, which have a low velocity unless strongly confined in a borehole or detonated by a straight 60% primer. Us e: Oil, gas and water well shooting, submarine blasting, mudcapping. "Hi-Velocity" Seismograph 60% Gelatin: A straight gelatin especially designed and packaged for use in seismic prospecting. Recommended for deep hole work and lengthy water exposures. Offered in plain or Fast-Coupler cartridges. Loggers' Powders: 15 to 30% strengths. Us e: Blasting stumps for the logging industry in the Pacific Northwest. Nitroglycerin---Cs Hj (NOs)j : An oily liquid; Sp. Gr. ap proximately 1.6. Us e: Essential ingredient in all DuPont djmamites; sold to drug trade in alcohol solution or with French chalk or sugar of milk to be used for medicinal purposes. Pellet Powder (Soda or B Blasting Powder): An improved deflagrating explosive. Us e : In'mining"coal where permissibles are not needed. Made in two grades in cylin ders 2 in. long, with a central perforation of in. Four of these cylinders are placed end to end and wrapped in paraffined paper to form cartridges. Available in diameters from 134 to 2 in. Permissible Explosives: Explosives which have been tested by U. S. Bureau of Mines and passed as safe for blasting in gaseous and dusty mines if used in accordance with certain specified conditions. "Duobel" Explosives: High velocity permissibles fur nished in five grades based upon velocity and cartridge count. Us e: For mining coal where lump coal is not a factor. "Gelobel" Explosives: Gelatin and semigelatin type permissibles; high density and high water resistance. Us e: For coal mining where high strength, high velocity, concentration of charge and water resistance are desired. "Lump Coal" C Explosives: A product with a very low velocity of detonation. Us e: For coal mining where maximum production of large size coal is desired. "Lump Coal" CC Explosives: A low velocity per missible similar to "Lump Coal" C except that due to slight change in the ingredients it can be manufactured in smaller diameter cartridges. Us e: For coal mining where maximum production of large size coal is desired. "Monobel" Expl osives: Low velocity permissibles; fur nished in six grades based upon velocity and cartridge count. Us e: For mining coal especially where lump is desired. "Red Cross" "Extra" Dynamite: High density, general purpose ammonia dynamites of 20 to 60% strengths. Us e: For quarrying, stripping, agricultural and general con struction work. fci DUP210011372 EXPLOSIVES DEPARTMENT "Red Cross" F.R. Dynamites: Four grades of dynamite (based upon strengths) with free-running characteristics (F.R.). Designed for use in sprung holes and adapted for replacing black powder in quarrying and in blasting soft rock. Co n t a in e r s : 50-lb. case containing four 12j^-lb. bags. "Seismex" Dynamite: An ammonia dynamite for seismic prospecting. Low cost but not recommended for water depths over 200 feet, with immediate shooting, or for any type of "sleeper" work if water is present. Offered in plain or Fast-Coupler cartridges. "Seismex" PW Dynamite: An ammonia dynamite for seismic prospecting in shallow-hole patterns. Very low cost but has water resistance sufficient only for work that is loaded and shot on the same day. Offered in plain or FastCoupler cartridges. "Seismogel" Gelatin: A straight gelatin dynamite de signed and packaged for use in seismic prospecting when water conditions are only moderately severe. Offered in plain or Fast-Coupler cartridges. The latter provide a convenient means for assembling a rigid column of explosive. Special Gelatin Dynamite (Ammonia Gelatin): A plastic, highly water resistant (not as good as Straight Gelatin), dense explosive furnished in grades from 25 to 90% strengths. Us e: In mining hard rock, tunneling, quarrying, construction work, shaft sinking (if not too wet). Straight Dynamite: Produces quick shattering action; is very sensitive to impacts; 20 to 60% nitroglycerin. Us e: In ditching by the propagation method, submarine blasting. ' "Stripkolex" Dynamite: A dynamite designed espe cially for shooting the coal in stripping operations. BLASTING AGENTS ' Akremite: A low cost blasting agent packed in plastic, expansible containers. Us e: For quarries, strip mines, etc. using large size blast holes. The plastic containers expand to fill the holes and offer a moderate degree of water re sistance. Note: Akremite is a patented product on which DuPont is exclusive licensee with right to sublicense. Akremite can be safely manufactured by the consumer and licenses are available for this purpose. "Nilite" Nitro Garbo Nitrate: Low cost, packaged blast ing agent. Us e: For blasting in quarries, strip mines, con struction work, etc. Co n t a in e r s : Heavy paper shells or round lined burlap bags 41 >- to 9-in. diameter. "Nilite" 101 Nitro Carbo Nitrate: A low cost, free- running blasting agent, having a density from 0.70-0.75. Us e: For blasting in quarries, strip mines, construction work, etc. where water resistance is not needed. Co n t a in e r s : 50-lb. paper bags. "Nilite" 202 Nitro Carbo Nitrate: A low cost, freerur.ning blasting agent, having a density of from 0.85-0.90. Us e: For blasting in quarries, strip mines, construction work, etc. where water resistance is not needed. CON TAINERS: 50-lb. paper bags. "Nilite" WR Nitro Carbo Nitrate: A low cost, packaged blasting agent, having moderate water resistance. Us e: For blasting in quarries, strip mines, construction work, etc. Co n t a in e r s : Round, lined burlap bags 4!j- to 9-in. in diameter. "Nitramex" No. 2-H Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge hammers or by heat. Is detonated by specially constructed primers. Us e: For blasting in extremely hard shooting quarries and strippings. Co n t ain er s : Metal cans 41 o- to 9-in. diameter x 24 in. "Nitramite" FR Nitro Carbo Nitrate: A free-running blasting agent, having a density of 0.85-0.95. Us e: For blasting in quarries, strip mines, construction work, etc. Co n t a in e r s : 50-lb. paper bags. "Nitramite" Nitro Carbo Nitrate: Low density blast ing agent similar to "Nitramon", packed in heavy paper shells. "Nitramite" is as insensitive to shock and friction as "Nitramon". It must be detonated by a specially con structed primer. Us e: Excellent for relatively easy shoot ing material, top loads, and for certain coyote shot layouts. Co n t a in e r s : 3- to 9-in. diameter. "Nitramon" Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge ham mers, the strongest commercial blasting cap or by heat. Is detonated by specially constructed primers. Us e: For blasting in quarries and stripping operations. CONTAIN ERS : Metal cans 4} to 9-in. diameter. "Nitramon" No. 2 Blasting Agent: A blasting agent having all the safety features and in all respects similar to "Nitramon" except that it is of lower strength and velocity and sells at a lower price. Like "Nitramon", it is detonated by specially constructed primers. Us e: For blasting in quarries and stripping operations. Especially adapted for top hole loading. Co n t a in e r s : Metal cans 4} i- to 9-in. diameter. "Nitramon" HH Blasting Agent: Same general prop erties as "Nitramon" but highly heat-stable. Us e: Strip blasting over burning coal. Co n t a in e r s : Cans 4}2- to 9-in. diameter. "Nitramon" S Blasting Agent: Has the same charac teristics as "Nitramon", but is packed in cans which screw together to form a rigid charge. Us e: For seismic pros pecting. Co n t a in e r s : 2 in. x 1 lb., 2)2 in. x 1 lb. "Nitramon" WW Blasting Agent: Same character istics as "Nitramon". Us e: For seismic prospecting at sea. Co n t a in e r s : 10-, 16`:i-, 25-, 30-, 40- and 50-lb. cans. Pelletol No. 1: A high density, free-running blasting agent which sinks readily in water and has unlimited water resistance. Safety characteristics similar to those of "Nitramex" No. 2. Us e: For loading around "Nitramon" and "Nitramex" No. 2H. Co n t a in e r s : Packed 4 bags per 50-lb. case. 17 DUP210011373 r EXPLOSIVES DEPARTMENT Printer for "Nitramite" Nitro Carbo Nitrate: A non nitroglycerin product packed in metal cans which can be fired with either "Primacord" or a cap. Especially de veloped for priming "Nitramite" but can be used with all other DuPont blasting agents, "Tovex" and AN prill-oil mixtures. Co n t a in e r s : Cans 4 in x 51 '2 lbs. and 6`-4 in. x 9 lbs. Primer for "Nitramon" and "Nitramex" No. 2-H Blasting Agents: Us e: Special primer for detonating "Nitramon" and "Nitramex" No. 2H. Must be initiated by "Primacord" Detonating Fuse. Co n t a in e r s : Metal cans 4-, 5-, 5J^-, 7- and 8-in. diameter x 24 in. Primer for "Nitramon" S Blasting Agent: Primers which screw tightly to "Nitramon" S. Detonated by elec tric blasting cap or "Primacord". Us e : To detonate "Nitramon" S in seismic prospecting. Co n t a in e r s : 2 in. x 1 lb., 21 > in. x 1 lb. "Tovex" Gel: A non-nitroglycerin, water compatible explosive slurry. Not cap sensitive and must be shot with a suitable primer ("Nitramon" primers are recommended). Gives very high loading density. Us e: In quarries, open pit mines and construction work where the rock or ore is massive and hard to break. Co n t ain e r s : Polyethylene tubes 5 in x 30 lbs. Water Work Booster: Small copper tubes containing a priming charge which are inserted in a copper well in the "Nitramon" WW cans. Detonated by an electric blasting cap. Us e: To bring about the explosion of "Nitramon" WW. Co n t a in e r s : Cartons of 50, cases of 500. t 18 DUP210011374 CHEMICAL SALES PRODUCTS Acetate Flake: Secondary cellulose acetate in flaked or powdered form, of approximate average composition CH7Os(OH)H(CH3COO)2H. Us e: In the plastics in dustry for making sheets, rods, tubes and molding powder; sheets for wrapping purposes; in photographic film industry for making x-ray and other safety films; in lacquer industry for making certain miscellaneous lacquers; in textile in dustry for making lacquer coating for fabrics, etc.; in wire industry for making lacquer coating for insulated wire. Co n t a in e r s : Moisture resistant sacks containing SO-lb. Ammonium Nitrate--Reagent Grade--NHsN03: Crys talline or granular powder. Us e: Where a product having a minimum purity of 99.95% is required, i.e. laboratory reagents, uranium processing and as a solid fuel propel lant. Co n t a in e r s : 100-lb. polyethylene-lined paper bags, 400-lb. polyethylene-lined fiber drums. Ammonium Nitrate--Technical Grade--NHNOs: Crystalline or granular powder, and solution. Us e: Manu facture of explosives, paper, and other materials not requiring a chemically pure product. CONTAINERS: 100-lb. paper bags, 400-lb. fiber drums, tank cars, tank trucks. Ammonium Nitrate--U.S.P. ("Niox" Ammonium Nitrate)--NH4NO3: Crystalline or granular powder and solution. Us e: In manufacture of nitrous oxide gas. Co n t a in e r s : 100-lb. polyethylene-lined paper bags, tank cars, tank trucks. '' Aniline--CbHj NH2: Pale yellow, oily liquid. Us e: Dyes, intermediates, paints and varnishes. CONTAINERS: 55-gal. non-returnable metal drums (430-lb.), tank cars, tank trucks. Caprolactam--(epsilon)--Polymer Grade -- (CH2)sCONH: Available as a white, flaked solid or in molten form. Us e: A high purity monomer for manufac ture of polyamide fibers and plastics and as an intermedi ate in organic syntheses. Co n t a in e r s : Tank cars (molten monomer) and 5S-lb. net multiwall paper bags. Cyclohexylamine (CHA)--Distilled--CeHLiNH2: Clear, practically colorless liquid having a characteristic amine ' odor; a strong organic base stable up to 450"F. Us e: Inter mediate for manufacture of rubber chemicals, dyestuffs, synthetic sweeteners, and corrosion inhibitors. CONTAIN ERS: Tank cars and 55-gal. galvanized drums. Cyciotrimethylenetrinitramine (Cyclonite, Hexogen, R DX): Crystalline or granular high explosive. Us e : Shaped charges, "Primacord" and explosive specialty items. Co n t a in e r s : 100-lb. net fiber drums. Dimethyl Terephthalate (DIVIT) -- HaCOOCCaHiCOOCH3: A high-melting, exceptionally high purity ester of terephthalic acid. Us e: In the manu facture of polyethylene terephthalate, wire enamels and as an intermediate for the synthesis of organic derivatives of terephthalic arid. Co n t ain er s : 50-lb. polyethylene-lined paper bags, 10-, 50- and 350-lb. polyethylene-lined fiber drums. Diphenylamine (DPA)--Refined--(CeH5)2NH: Avail able in a molten state and as a flaked solid. Us e: In manu facture of rubber antioxidants, as an additive for lubri cating oils and greases, as a polyethylene stabilizer against oxidative degradation, phenothiazine, fungicides and in secticides, smokeless powder stabilization, a chemical intermediate in dyes, as an antioxidant and stabilizer for fats, oils, soap, paint, printing ink, glue, and pharmaceuti cals. Co n t a in e r s : 50- and 100-lb. paper bags, 325-lb. fiber drums, 70,000- and 90,000-lb. tank cars. (See also I. & B. Department, Page 63.) `Hitec" Heat Transfer Salt: A eutectic mixture com prised of sodium nitrite (NaNOs), sodium nitrate (NaNOs) and potassium nitrate (KNO3). Us e: As a heat transfer medium for both heating and cooling operations in the range of 300-1,000F., such as maintaining reactor temper ature, high temperature distillation, and preheating of reactants. Co n t a in e r s : 150-lb. and 400-lb. fiber drums. Jet Perforators: Explosive charges utilizing the "shaped charge" principle in a variety of sizes. Us e: In perforating cil well casing to permit entry into the well bore of fluids from producing formations. Co n t a in e r s : Fiberboard cases of 200. Lead Azide--PbN: White to buff, crystal solid when dry. In dry state is a highly sensitive primary detonator. Must be kept wet with water or an ethyl alcohol and water mix ture until used. Us e: In manufacture of detonators. Co n t a in e r s : 150-lb. steel drums. Mild Detonating Fuse (MDF): A small diameter, flexible metal tube containing high explosive core loadings ranging from 1 to 20 grains per foot. The material, which has detonation velocities in excess of 20,000 feet per second, propagates a detonation from point to point without damage to adjacent equipment. The material has utility for missle applications such as stage separation. Co n t a in e r s : Various lengths on spools or as custom assemblies having special electrical initiators and primers attached. Mixed Acid--Technical (Nitrating Acid): Mixture of nitric (HNO3) and sulfuric (H2SO4) acids. Us e: As a nitrat ing agent in the manufacture of explosives, nitrocellulose, nitroglycerin, dyes, and various organic intermediates. Co n t a in e r s : 700-lb. metal drums, tank cars and tank trucks. Nitric Acid--HNOa: In all concentrations. Clear colorless to light yellow corrosive liquid. Us e: Metallurgy, manu facture of dyes and dye intermediates, etching agent for photoengravers, plastic and synthetic fiber manufacture, manufacture of explosives, general oxidation purposes. Co n t a in e r s : Tank cars and tank trucks. Nitrobenzene--C,,HjNO:: Pale yellow liquid. Us e : Inter mediate for manufacture of aniline, azobenzene, rubber chemicals and other organic intermediates. Co n t a in e r s : 55-gal. (500-lb.) metal drums, tank cars and tank trucks. Nitrocellulose--Soluble Types: Cellulose nitrate with variable nitrogen content in a wide range of viscosities. Available wet with butyl, ethyl or isopropyl alcohol and water. Us e: Excellent film-forming material for use in lacquers and other types of finishes; coating for cellophane, paper, fabrics, component of adhesives. Co n t ain e r s : 55-gal. capacity returnable metal drums. Nitroglycerin--Beta Lactose Mixture--Cj H^NOj Jj : Fine white powder. Available as a trituration of 10% 19 DUP210011375 EXPLOSIVES DEPARTMENT nitroglycerin, 90% beta lactose by weight. Us e: Medicinals. Co n t ain er s : 10-lb. and 50-lb. polyethylene-lined fiber drums. "Nitrosan" Blowing Agent: Yellow powder comprised of 70% N,N'-dimethyl-N,N'-dinitrosoterephthalamide and 30% white mine-a] oil. Controlled thermal decomposition liberates nitrogen at 100C. with residue of dimethyl terephthalate. Non-staining, non-discoloring gas generant. Us e: For formation of open-cell or closed-cell polyvinyl chloride in addition to other plastics and elastomers. Co n t a in e r s : 5-lb. fiber drums. Pentaerythrite Tetranitrate (PETN): White crystalline powder. Sensitive initiating explosive when dry. Must be kept wet with water or an ethyl alcohol and water mixture until used. Us e: Manufacture of detonators; "Primacord" and explosive specialties. Co n t a in e r s : 55-gal. (280-lb. net) metal drums. "Pyrocore" Igniter Cord: A small diameter, unusually high-velocity igniter cord capable of igniting propellant grains directly or intermediate ignition materials. Also satisfactory for propagating a detonation from point to "p6mUwTth_a~ minimum oFdamage to adjacent equipment or devices. Available in various sixes and strengths. Co n t a in e r s : Various lengths on spools or as special devices having electrical initiators or reception primers. Pyromellitic Acid (PMA)-(HOOC)2CeH2(COOH)2: White powder of 99+% purity. Aromatic tetrabasic acid, m.p. 257-265C. Undergoes typical reactions of organic carboxylic acids. Us es : Polymer intermediate, raw ma terial for plasticizers, lubricants, and alkyds with high thermal stability. Co n t a in e r s : 5-, 45-, and 175-lb. poly ethylene-lined fiber drums. Pyromellitic Dianhydride (PMDA)--0(C0)2C6H2- (co),o : White powder of 98+% anhydride content. Aromatic dianhydride, m.p. 284-286C. Undergoes typical reactions of organic anhydrides. Us es : Polymer inter mediate, crosslinking agent for epoxy resins, raw material for plasticizers, lubricants, and alkyds. Co n t a in e r s : 5-, 25-, and 100-lb, polyethylene-lined fiber drums. "Qualex" Refined Sodium CMC: Low and High Viscosity: A special grade of sodium CMC developed for use as a fluid loss and viscosity control additive in drilling muds. Co n t a in e r s : Multi-ply moisture resistant 50-lb. bags. Rivets, Aircraft and Industrial Blind Expansion: Fast acting, strong one-piece fasteners. Available in a wide variety of sizes and alloys. Us e: For "blind" fastening of primary and secondary assemblies partially or totally in accessible from the rear, and in open work. CONTAINERS: Fiberboard boxes of 100, 500 and 1,000. Riveting irons: Us e: Electrical heating tools for expand ing Du Pont Aircraft and Industrial Blind Expansion Rivets. Riveting Iron Tips: Metal tips specifically fashioned for use with Du Pont Riveting Irons. Sheet Explosive EL-506 Series: A pliable sheet of high explosive and binder available in various thicknesses. 20 Us e: Can be used in almost any high explosive application and for such special applications as metal hardening, metal forming, shaped charges or wherever thin layers of a highvelocity Class A explosive are desired. Co n t a in e r s : Fiber boxes. Sodium CIVIC (Sodium Carboxymethylceliulose): Dry, free-flowing, light cream to white colored fibrous powder completely soluble in water. Available in technical and refined grades, in several viscosity types and degree of substitution levels. Us e: As a thickening, stabilizing, dis persing, suspending, film-forming agent, and protective colloid in aqueous systems, for soil suspension in detergents, fluid-loss control in drilling muds; strength improvement and surface coating of paper and paperboard; as a textile warp size, laundry size, synthetic tobacco leaf binder, ceramics binder, tooth paste thickener, liquid detergent thickener, ice cream stabilizer; in foods, pharmaceuticals, cosmetics, paints, adhesives, textile finishes, and emul sions. Co n t a in e r s : Multi-ply moisture resistant 50-lb. and 75-lb. bags, 51-gal. fiber drums. Sodium Nitrite--U.S.P.--NaN02: Available as a granu lar or pelleted solid, purity 99.5% minimum. Us e : As a corrosion-inhibitor in oil storage tanks, domestic fuel oil tanks, oil product pipelines, oil tankers, antifreeze solu tions, diesel engines, wrapping materials, cutting fluids, greases and lubricants, fire extinguishing compounds, re frigerating systems, temporary protective coatings, paints and sea water systems; in heat transfer salt, in azo dye manufacture, in rubber retarders and accelerators, in curing meats, in inhibiting polymer formation and in insecticidal smokes. Co n t a in e r s : 100-lb. paper bags, 150-lb. and 400-lb. fiber drums. Sulfuric Acid--H2S04: Clear colorless to light pink, heavy, oily, corrosive liquid; soluble in water in all pro portions with evolution of heat. Strength: 60 Be................... 77.67% HsSOt 66 Be.................... 93.20% H2S04 Us e: In the manufacture and processing of a wide variety of chemical and industrial products. (See also I. isB. De partment, Page 57.) ' Terephthalic Acid ( T P A ) -- Technical-- HOOCCcH-iCOOH: Pale yellow crystalline solid. Aromatic diabasic acid, M. P. 425C., insoluble in water and most organic solvents. Undergoes typical reactions of organic carboxylic acids and ring substitution. Useful as polymer intermediate, and as raw material for plasticizers, alkyds with high thermal stability and as a cross-linking agent. Co n t a in e r s : 50-lb. and 300-lb. fiber drums. Trinitrotoluene (TNT)--CrH,OeN3: Pale yellow, flaked solid. Us e: As an intermediate in the dye industry, in the manufacture of detonators and explosive specialties; mili tary explosives. Co n t a in e r s : 60-lb. net fiber boxes. "Unicel" ND Blowing Agent: Cream-colored powder containing 40% N-N'-dinitrosopentamethylenetetramine (DNPT) and 60% inert filler. G as generant which releases nitrogen under controlled heating. Stable up to 180-185C. but can be activated to decompose at lower temperatures. Us e: For incorporation in elastomers or resins as a source of gas for forming cellular or sponge materials in a wide range of densities. Co n t ain er s : 100-lb. fiber drums. (See also Elastomers Department, Page 3.) DUP210011376 EXPLOSIVES DEPARTMENT on "Unicel" NDX Blowing Agent: Cream-colored solid I.M.R. No. 4198: For use in sporting rifles and with light :al containing 80% N-N'-dinitrosopentamethylenetetramine bullets in military cartridges. ,her and 20% by weight of plasticizer. Has properties similar to "Unicel" ND but provides twice volume of gas per unit I.M.R. No. 4227: For use in sporting rifles and with light bullets in military cartridges. weight. Us e : As gas generant in preparation of foamed or cellular elastomers or plastics where the inert filler in I.M.R. No. 4320: For use in sporting rifles and in military 7, er "Unicel" ND may be objectionable. cartridges with limited case capacity, id I.M.R. No. 4350: For use in magnum cartridges. of SMOKELESS POWDERS PB Smokeless Shotgun Powders: A single base propel it le r, Improved Military Rifle Powders: These powders repre sent the latest development in progressive burning nitro cellulose powders, giving higher velocity than the older types within the prescribed limits of pressure. They do not contain nitroglycerin. Co n t a in e r s : 20-lb. metal kegs. lant, designed particularly to be used in light and medium shotshell loads. The powder is very flexible and is noted for its consistency of performance in all makes of shells. It is clean burning and not affected by moisture. Co n t a in e r s : 25-lb. metal drums. it s, :1- I.M.R. No. 3031: For use in sporting rifle ammunition requiring heavy bullets and in military cartridges. Sporting Rifle Powder No. SR-47S9: A nitrocellulose powder, especially designed for use in reduced loads in large capacity cartridges, such as the 30/06 Springfield and I.M.R. No. 4064: For use in military cartridges, most similar cartridges. This powder is not recommended for prominent of which, in this country, are those for the use in pistol and revolver cartridges. Co n t ain er s : 25-lb. 30/06 Springfield Rifle. metal drums. a oil S, ts ;.'e ig , .al ' id k, ty >e- nc st .ic er ds it. he ti er re es :s. :e 3e :e , 21 DUP210011377 / { FABRICS AND FINISHES DEPARTMENT FABRICS SALES GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT SALES OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 BRANCH OFFICES: Chicago 46, Illinois Detroit 2, Michigan Fairfield, Connecticut Long Island City 1, New York Los Angeles 22, California Newburgh, New York 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 5-238 General Motors Building 48-05 Van Dam Street 2000 South Garfield Avenue ORchard 5-1010 TRinity 5-1990 CLearwater 9-3351 STillwell 6-0200 RAymond 3-8401 JOhn 1-3700 PLANTS: Fairfield, Connecticut Newburgh, New York PRODUCTS VINYL COATED MATERIALS "Fabrilite" Vinyl Coated Fabrics: These materials are made on a wide variety of fabric backs and are coated with selected vinyl compounds engineered for maximum resis tance to flexing and wear. The fabric backing supports the vinyl coating and makes it resistant to ripping, tearing, scuffing and cracking. All "Fabrilite" is water resistant, soap- and water-washable. Made in a wide variety of colors, embossed effects and finishes, "Fabrilite" is available in a range of grades based on the service requirements of the end use. Grades are determined by the weight and con struction of the fabric base and the amount of vinyl applied. Upholstery grades include: Elastic knit fabric back con struction for ease in stretching and tailoring around curves; breathable constructions that promote seating comfort because they permit passage of air through thousands of tiny pores. The following list shows how "Fabrilite" is used by other manufacturers: Automotive: For upholstery and trim, headlining, bind ings and welts, and seat covers Baby Carriages: For upholstery and tops Belts Bicycle Saddles Bookbinding: For looseleaf binders "Fabrilite" in Jeweltone Metallic Colors: Wide range of nontamishing metallic colors for upholstery and trim, for footwear, for handbags, for wall coverings. "Fabrilite" in Pattina Finish: Unusual reproduction of patent leather for shoes and handbags Folding Door and Partition Enclosures Footwear: For upper stock in certain types of women's shoes and slippers; for quarterlining, sock lining; for platform wrappers and heel coverings. Furniture Upholstery and Household Furnishings Garment: For men's, women's and children's sports jackets Handbags and Pocketbooks Luggage Motion Picture Screens for the Home Sporting Goods Table Pads Wall Coverings "PX" Vinyl Book Cloth: A special grade of vinyl im pregnated washable book cloth, especially engineered for full color decoration by offset lithography. "Tontine" Flame Resistant Vinyl Drapery Material: Coated fabrics for window shades, for darkening draperies in visual aid schoolrooms, for school stage curtains and cyclorama backgrounds. UNSUPPORTED VINYL MATERIALS "Fabrilite" Unsupported Vinyl Materials: These ma terials are made without a fabric backing from selected vinyl compounds for handbags, pocketbooks, looseleaf binders and notebooks; and in a special grade for lamina tion to metal for use as a decorative trim on household appliances and metal furniture. PYROXYLIN COATED AND IMPREGNATED MATERIALS "Fabrikoid" Pyroxylin Coated Fabrics: The fabrics are processed with pyroxylin to produce water resistant, soap- and water-washable materials for applications which do not require the resistance to flexing given by vinyl coated fabrics. Bindings and Welts Bookbinding 22 DUP210011378 FABRICS AND FINISHES DEPARTMENT FABRICS SALES "Fabrikoid" Pyroxylin Coated Fabrics (Continued) Card Table Covers Case Coverings Draw Sheet: For newspaper printing presses fabrics have extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for diaphragms, gaskets, washers, packings, seam sealants and curing bags and blankets used in laminating. Footwear: For strapping in certain types of women's shoes and slippers and for sock lining "Rug Anchor" Rug Underlay: Foam rubber underlay which prevents rugs from slipping. Hat Sweats 3 Luggage Lining SYNTHETIC RUBBER SHEET STOCKS 3 Paper Machine Aprons: For paper making equipment "Fairprene" Synthetic Rubber Sheet Stocks: With Table Mats and Pad Coverings out fabric insert; made from synthetic rubber compounds, Tire Liners: Prevents adhesion to rubber including silicone rubber and "Viton" A fluoroelastomer Trimmings: For millinery and costumes for special industrial applications in the automotive, avia tion, gas, chemical, petroleum and marine fields. Has 3 i "PX" Book Cloth: A special grade of pyroxylin or vinyl impregnated, washable book cloth for bookbindings. extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for gaskets, washers, pack ings, seam sealants and blankets used in laminating. ) "Tontine" Washable Window Shade Cloth: This material is a uniformly woven fabric impregnated and coated on both sides with pyroxylin or vinyl compounds. SYNTHETIC RESIN COATED FABRICS, "Tontine" is available in many colors with range of light LAMINATES AND FELTS transmittancy. Opaque coated cloth and fire resistant grades are also available. "Armalon" TFE-Fluorocarbon Fiber Felt: An in dustrial felt made in various thicknesses, either as porous CEMENTS material or impregnated with tetrafluoroethylene resin. The impregnated product is used as a gasketing material "Fairprene" Industrial Cements: These products are on equipment handling corrosive materials. The plain felt made from synthetic rubber compounds for cementing is used as a filter material, particularly for corrosive prod various combinations of cured and uncured "Fairprene" ucts. The TFE-Fluorocarbon resin provides a maximum sheet stock (without fabric insert), cured and uncured degree of temperature and chemical resistance. "Fairprene" coated fabrics, cured and uncured rubber to leather, fabrics, paper, metal and wood. "Armalon" TFE-Fluorocarbon Resin Coated Glass Fabrics, Tapes and Laminates: For electrical insulation; RUBBER COATED, SILICONE COATED AND SYNTHETIC RUBBER COATED MATERIALS for antistick and antifriction conveyor belts and covers for heat sealing units in the food and packaging industries, for industrial diaphragms and gaskets requiring unusual "Fairprene" P.A.W. Tape(Protective and Waterstop): resistance to chemicals and to high and low temperatures. A seam sealant engineered for shipbuilding and aircraft use in oil-, air- and water-tight structural joints. "Lecton" Acrylic Resin Coated Fabrics and Lami nates: Glass fabrics coated with "Lecton" acrylic resin "Fairprene" Synthetic Rubber Coated Fabrics: A and laminates made from these coated fabrics. Offered as line of synthetic rubber coated fabrics, including silicone an electrical insulating material, these fabrics have ex rubber and "Viton" A fluoroelastomer designed for in cellent thermal stability at Class B temperatures (130C.) dustrial applications in the automotive, aviation, gas, and can be used for extended periods up to 150C. They are chemical, petroleum and marine fields. "Fairprene" coated essentially unaffected by ` `Frdon' ' fluorinated hydrocarbons. 23 DUP210011379 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION AUTOMOTIVE FINISHES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware t el epho ne PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 AUTO MANUFACTURERS' SALES OFFICES: Detroit 2, Michigan Los Angeles 22, California 5-238 General Motors Building 2000 South Garfield Avenue TRinity 5-1990 RAymond 3-8401 COLOR ADVISORY SERVICE: Detroit 2, Michigan 5-238 General Motors Building TRinity 5-1990 PLANTS: Chicago 14, Illinois 2100 Elston Avenue Everett 49, Massachusetts 59 Waters Avenue Flint 2, Michigan Hamilton Avenue and St. John Street Fort Madison, Iowa Post Office Box 319 Parlin, New Jersey Philadelphia 46, Pennsylvania 3500 Grays Ferry Avenue ----- South San Francisco, California Post Office Box 608 ( Toledo 1, Ohio Tucker, Georgia 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 PRODUCTS ]i Cements: . Metal (Methacrylate Modified Lacquer Type): Automotive Gasket: Prepared in heavy varnish or pigmented paste form; applicable by brush. Us e: For cementing gaskets in place on automotive motors to increase production efficiency. Co n t a in e r s : 1- and 5-gal. Mixed pyroxylin-methacrylate base clear. Us e; Pro tective coating for exterior of bright aluminum panels on buses. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. cans, 53-gal. drums. Metal (Modified Alkyd Type): Synthetic clears. Us e: Special Cements: A wide range of adhesives for bonding various substances by modifying applications and curing methods. Co n t ain er s : 1- and 5-gal. cans, 53-gal. drums. For interiors over simulated grain on car interior metal trim for application by electrostatic spray. CONTAINERS: Qt., 1- and 5-gal. cans, 53-gal. drums. Clears: Metal (Phenolic Spar Type): Exterior or interior varnishes. Us e: Over simulated wood grain or decals. Bronzing Liquid (Lacquer or Alkyd Type): Lacquer Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. I type is air-dry; alkyd type is air-dry or bake. USE: Wood (Alkyd Type): Clear synthetic varnish. Us e: Vehicle for aluminum or bronze powders for protection Wood station wagons. Co n t a in e r s : Qt., 1- and 5-gal. and decoration of certain automobile small parts. CON cans, 53-gal. drums. TAINERS: Qt., 1- and 5-gal. pails, 53-gal. drums. Wood (Lacquer Type): Modified pyroxylin base. Us e: Metal (Alkyd Type): Exterior or interior synthetic varnish. Us e: Over imitation grain or decals, or over Interior wood trim of custom built cars. .Co n t ain er s : Qt., 1- and 5-gal. cans, 53-gal. drums. bright chrome plated parts. Co n t ain er s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Phenolic Spar Type): Oil modified, phenolic spar varnish. Us e: Wood station wagons. Co n t a in e r s : Metal (Lacquer Type): Pyroxylin base clear. Us e: Qt., 1- and 5-gal. cans, 53-gal. drums. For interiors over simulated wood, grain or decals. Co n t ain er s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood Sealer (Alkyd or Phenolic Type): Oil modified alkyd or phenolic with or without toxic component which Metal (Methacrylate Type): Methacrylate base clear. retards fungus growth. Us e: Applied by dip to wood Us e: Protection of bright chrome plated parts, exterior station w'agon dimensional pieces or truck body parts to exposure, dip or spray application. Co n t ain er s : Qt., 1- seal wood pores and prevent moisture absorption. CON and 5-gai. cans, 53-gal. drums. TAINERS: 5-gal. pails, 53-gal. drums. 24 DUP210011380 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Finishes Compounds: sheet metal parts, etc. Co n t a in er s : Pt., qt., 1- and 5- gal. cans, 53-gal. drums. "Duco" Polishingor Rubbing Compound: A polish ing material in paste form, designed for machine appli "Duco" Metalli-Chrorne Lacquers: Metallic finishes cation or hand nibbing. Us e: For final polishing of producing unusual color, effects of great durability. Ap "Duco" lacquers to smooth surface and to bring up full plicable by spray only. Us e: Finishing of automobile gloss. Co n t a in e r s : 1- and 5-gal. cans. bodies and sheet metal parts. Co n t a in e r s : Pt., qt., 1- Shielding Compound: A pigmented semipaste, having and 5-gal. cans, 53-gal. drums. nondrying vehicle. Us e: Masking parts of surface while another color is being applied. 'Used with "Duco" finishes only. Co n t a in e r s : 1- and 5-gal. cans. "Duco" Striping Lacquers: Air-dry, pigmented, colored lacquers; applicable by brush. Us e: For striping automobile bodies and wheels and touch-up work. "Dulux" Foam Resin: Polyester resin, specific for use Co n t a in e r s : Pt., qt., 1- and S-gal. cans. with isocyanates to produce flexible polyurethane foams. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. "Lucite" Acrylic Lacquers: Air-dry pigmented colored lacquers on acrylic resin base; applicable by spray only, but possessing much greater durability to exposure than Enamels: "Duco" lacquers. Us e: Finishing of steel automobile Chassis Black: An air-dry, black, pigmented enamel; applicable by brush or spray with an oil, asphalt, bodies and sheet metal parts. Co n t a in e r s : Pt., qt., 1and 5-gal. cans, 53-gal. drums. pyroxylin or synthetic type base. Us e: On automobile chassis for protection and decoration. Co n t a in e r s : 1- Primers: and 5-gal. cans, 53-gal. drums, tank wagons, tank cars. Black Dipping Primer (Baking, Pigmented, Oil "Dulux'' Enamels: Baking and air-dry, clear and pig or Alkyd Type): Unusual stability in large dip tanks. mented enamels based on a synthetic type vehicle; ap Us e: Dipping fenders, hoods and miscellaneous small plicable by spray--manual, machine or electrostatic. parts. Base coat for "Duco" or "Lucite" lacquers or Us e : Finishing of steel and wood automobile bodies, "Dulux" enamels. Co n t a in e r s : 1- and 5-gal. cans, 53- sheet metal parts, wheels, etc. Co n t a in e r s : Pt., qt., 1- gal. drums, tank wagons, tank cars. and 5-gal. cans, 53-gal. drums, tank wagons. Flash Primer (One-Bake Type): Baking, pigmented, i Engenamel: (See Page 31). colored, liquid paints on a synthetic base; applicable by spray. Us e: Applied to steel automobile bodies and Fender: A black, oil or synthetic resin modified asphaltumtype enamel applied by dipping and baking at high temperature. Us e: Fender and miscellaneous parts finish followed immediately by surfacer or baking enamel without drying period between coats. Co n t a in e r s : 1and 5-gal. cans, 53-gal. drums. applied over rubber first coat. Co n t a in e r s : 5-gal. cans, 53-gal. drums, tank wagons, tank cars. Metal (Oil Type): Air-dry and baking, pigmented, colored, liquid paints with oil base; applicable by spray. ' Gas Tank: A pigmented, black enamel based on an oil Us e: On automobile bodies and sheet metal parts to semi alkyd or full alkyd type vehicle; applicable by spray give adhesion between the metal and succeeding coats. or flow coating; air-dried or force-dried at temperatures Co n t a in e r s : 1-and 5-gal. cans, 53-gal. drums. up to 250F. Us e: Exterior finish of teme plate automo bile gasoline tanks. Co n t a in er s : 1- and 5-gal. cans, Metal (Pyroxylin Type): Air-dry, pigmented, colored, 53-gal. drums, tank wagons. liquid paints on a pyroxylin base; applicable by spray. Us e: For touch-up work only on automobile bodies and Motor: Air-dry, pigmented, colored enamels; applicable only under lacquer. Co n t a in e r s : 1- and 5-gal. cans, by spray; available in an oil, synthetic or pyroxylin type 53-gal. drums. base. Us e: On automobile motors. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Metal (Synthetic Type): Air-dry and baking, pig mented, colored, liquid paints with synthetic base; appli Small Parts Dip: Pigmented, black or colored enamels based on semi alkyd or full alkyd vehicles to bake 250 cable by spray or brush. Us e: On automobile bodies and sheet metal parts to give adhesion between the metal to 350F. Us e: Automobile small parts. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. and succeeding coats. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Lacquers: Dip: Air-dry, pigmented, colored or clear lacquers on a special modified pyroxylin base; applicable by dip. Us e: On instrument panels, molding, interior decoration, etc. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. "Duco" Lacquers: Air-dry, pigmented, colored lac quers on a special modified pyroxylin base; applicable by spray only. Us e: Finishing of steel automobile bodies, Wood: A special low pigmented type primer applicable by brush or spray. Us e: On wood commercial automobile bodies. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. Wood Sealer: Clear or pigmented, synthetic or oil type, air-dry, penetrating sealer with or without toxic in gredient to retard growth of fungi; applicable by dip, brush, spray or flow. Us e: On wood before other finish to seal pores and prevent failure by moisture absorption. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. DUP210011381 FABRICS AND FINISHES DEPARTMENT Primer-Surfacers: "Preparakote" Primer-Surfacers: Air-dry or baking, highly pigmented, liquid paints on a special synthetic base; applicable by spray or brush. Us e; On steel auto mobile and commercial car bodies, preparatory to finish ing with either "Duco" or "Dulux" finishes. CONTAIN ERS: 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Baking Type): Highly pigmented, liquid paints of the baking type on an oil or semi alkyd base; applicable by spray. Us e: On steel automobile and commercial car bodies, preparatory to finishing with either "Duco", "Lucite" or "Dulux" finishes. CON TAINERS: 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Non-SandingType).'Medium pig mented, modified alkyd base, for use under "Duco" or "Dulux" finishes. Material must be baked. When used under "Dulux" it can be flashed and the baking ac complished simultaneously with the baking of the top coat. Us e: On steel automobile and commercial car bodies, preparatory to finishing with "Duco" or "Dulux" finishes. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Pyroxylin Type): Highly pig mented, lacquer type primer-surfacers. Us e: Spot repair ing of car finish under lacquer or synthetic topcoats. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Putties: "Duco" Putties: Air-dry, highly pigmented, paste materials; very fast drying; applied by glazing to fill metal imperfections. Us e: On automobile bodies pre paratory to finishing with either "Duco", "Lucite" or "Dulux" finishes. Co n t ain er s : }-/>-, 1- and 5-gal. cans. "Dulux" Paste Filler: Alkyd pastes-for filling pores in wood of station wagons or interior wood trim of custom FINISHES DIVISION: Automotive Finishes built cars or filling pinhole pores in glass fiber reinforced polyester panels or parts preparatory to finishing with dear, surfacing material, or color. Co n t a in e r s : 5-gal. cans, 30-gal. drums. "Dulux" Putties: Air-dry, highly pigmented, paste materials; minimum shrinkage; applied by glazing to fill metal imperfections. Us e: Preparatory to finishing with either "Duco" or "Dulux" finishes. Co n t ain er s : 3- and 5-gal. cans. Oil Base Putties: Air-dry, highly pigmented, paste materials on oil base; applied by glazing to fill in dentations in metal which are too deep for the surfacer to fill. Us e: On automobile bodies over primer. CON TAINERS: Mi-, 1- and 5-gal. cans. Retarders: Slow evaporating, high boiling "Duco" or "Lucite" solvents. Us e: Added to "Duco" or "Lucite" thinner to improve leveling and/or to prevent blushing in humid weather. Co n t a in e r s : I- and 5-gal. cans, 53-gal. drums. Sealers: Automotive bleederseal sealer for bleeding colors. For use over and under both lacquer and synthetic enamel type finishes to prevent discoloration of the topcoat if underneath color tends to bleed. Co n t a in e r s : Qt. and gal. cans. Surfacers: Air-dry and baking, highly pigmented products on- oil; pyroxylin and synthetic types of bases; applicable by spraying over primer to give a satisfactory smooth surface when sanded, preparatory to "Duco" or "Dulux" finishes, or other final finish applications. Us e: On auto mobile bodies and sheet metal parts. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Thinners: Clear, liquid solvents. Us e: For the reduction of primers, surfacers, lacquers and enamels to proper working consistency. Co n t a in e r s :1- and 5-gal. cans, 53-gal. drums, tank wagons, tank cars. . j ' i j ; ' j ! 1 , j j j i 26 DUP2100U382 FINISHES DIVISION: Automotive Refinishing Moterials AUTOMOTIVE REFINISHING MATERIALS GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Philadelphia (Wynnewood), Pa. San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 308 East Lancaster Avenue 1600 Trousdale Drive, Burlingame SYcamore 4-9581 ORchard 5-1010 MAin 1-8516 FLeetwood 7-4611 TRinity 8-2700 OXford 7-3870 SERVICE WAREHOUSES: Atlanta 18, Georgia Baltimore 18, Maryland Birmingham 3, Alabama Boston 54, Massachusetts Buffalo 25, New York Charlotte 3, North Carolina Chicago 47, Illinois Cleveland 14, Ohio Columbus 12, Ohio Dallas 21, Texas-- Denver 1, Colorado Detroit 34, Michigan Houston 11, Texas Indianapolis 4, Indiana Jacksonville 1, Florida Kansas City 41, Missouri Long Island City 1, New York Los Angeles 22, California Memphis 3, Tennessee Milwaukee 21, Wisconsin Minneapolis 4, Minnesota New Orleans 25, Louisiana Newark, New Jersey Oakland 6, California Oklahoma City 2, Oklahoma Philadelphia 24, Pennsylvania Pittsburgh 5, Pennsylvania Portland 2, Oregon St. Louis 10, Missouri Salt Lake City 4, Utah San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 400 East Twenty-Ninth Street 2301 Fifth Avenue, South 75 Fourth Avenue, Waltham 1696 Walden Avenue 2500 South Boulevard 2560 North Elston Avenue 3137 Chester Avenue 1450 Dublin Road 8510 Ambassador Row 555 Quivas Street 19930 Conner Avenue 332 South Wayside Drive 1825 West Eighteenth Street 2256 Dennis Street 6015 Manchester Trafficway 48-05 Van Dam Street . 2000 South Garfield Avenue 1573 Union Avenue 2601 North Third Street 1401 South Fourth Street 4401 Euphrosine Street 15 Stem Avenue, Springfield 1020 East Eighth Street 201 East Hill Street 4242 Whitaker Avenue 2222 Noblestown Road 5510 Southeast McLoughlin Boulevard 2300 Hampton Avenue 990 South Sixth Street, West Post Office Box 927, South San Francisco SYcamore 4-9581 BElmont 5-0278 FAirfax 2-8775 TWinbrook 3-2550 KEystone 7979 JAckson 3-5094 BRunswick 8-2050 MAin 1-8516 HUdson 6-7191 FLeetwood 7-4611 AComa 2-8945 FOrest 6-8800 WAlnut 3-2546 MElrose 8-5591 ELgin 3-7461 EMerson 3-1390 STillwell 6-0200 RAymond 3-8401 BRoadway 6-4746 COncord 4-6872 FEderal 2-0558 AUdubon 6658 DRexel 6-5151 HIgate 4-1980 JAckson 5-2194 GArfield 6-3701 WAlnut 1-9190 BElmont 2-6177 Mission 7-0800 EMpire 4-3582 JUno 3-0733 PLANTS: Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo I, Ohio Tucker, Georgia 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 27 DUP210011383 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Reflnishing Materiel* PROD UCTS Aluminum Cleaner: A cleaner and brightener for new and weathered aluminum. Also for cleaning aluminum surfaces on which clear coatings or "Dulux" or other alkyd resin enamel systems are to be supplied. Co n t ain er s : Qt. and gal. bottles. Aluminum Paint: Ready mixed; varnish type products; chrome aluminum and aluminum for interior and tops of truck bodies; motors of passenger cars and commercial vehicles; tractors, farm equipment, road machinery, etc. Spray or brush. Co n t a in e r s : Qt. and gal. cans. Aluminum "Duco" Lacquer: Ready-to-mix, for spray application over recommended undercoats, dries to dull sheen for rubbing and polishing. Packaged in double compartment cans, aluminum paste in top and vehicle in bottom. Co n t a in e r s : Qt. and gal. cans. coating over "Dulux" type decalcomanias, lettering or other decorations; a slow size with large decalcomanias; a protective coating over stained and filled wood surfaces. Co n t a in e r s : Qt., 1- and 5-gal. cans. "Dulux" Enamel Reducers: Used to reduce the viscosity of "Dulux" enamels and other alkyd resin products. Co n t a in e r s : Qt. and gal. cans, 5-gal. pails, 1G-, 30- and 55-gal. drums. "Dulux" Enamels: Metallic and nonmetallic lines of alkyd resin type colors, blacks and whites for spray appli cation and nonmetallic colors, blacks and whites for brush ing. Us e: To finish or refinish automobiles, trucks and all types of commercial vehicles over recommended under coats. Co n t a in e r s : Qt., 1- and 5-gal. cans. Aluminum "Dulux" Enamel: Ready-to-mix high brilli ancy aluminum for spray or brush application and ready mixed smudge resistant aluminum for spray application over recommended undercoats on commercial vehicles and other exterior uses, Ready.-to-mix-packaged in-double 'compartment cans. Co n t a in er s : Qt. and gal. cans. "Dulux" Mixing Enamels: Pigmented synthetic prod ucts for intermixing in conjunction with the Blending Machine for "Dulux" enamels. Require addition of an additive before using. Us e: To finish, or . refinish auto mobiles, trucks and all types of commercial vehicles over recommended undercoats. CONTAINERS: Qt. and gal. cans. l Chassis Blacks: Varnish type products, gloss and flat; gasoline and non-gasoline proof for reflnishing chassis. Co n t a in e r s : 1- and 5-gal. cans, 16- and 55-gal. drums. Fish Eye Eliminator: An additive for "Duco" and "Lucite" lacquers and "Dulux" enamels, designed to eliminate craters in these finishes when applied on surfaces previously waxed or polished with silicone products. Co n Clear Gloss Lacquer: A nitrocellulose type clear for garnish mouldings, instrument panels and other parts of t a in e r s : Boxes of 50 capsules, each of 0.486 gm. and 4-oz. plastic dispenser. i the interior of automobiles; also mixed with aluminum or bronze powders for striping. Co n t a in e r s : Qt., gal. and 5-gal. cans; 16- and 55-gal. drums. Force-dry and Anti-Wrinkle Agent; An additive for use with "Dulux" air-dry enamel colors in very hot weather or when subjected to force drying to prevent wrinkling. Co n t a in e r s : 1- and 5-gal. cans. Clear Metal Lacquer: A nitrocellulose type clear for interior use as a protective coating for aluminum, alumi num alloys and other non-ferrous metals. Co n t ain er s : Qt., 1- and 5-gal. cans; 16- and 55-gal. drums. Furniture Finishes: "Duco" sealers, clear and pigmented lacquers, stains and wood fillers for refinishing wood furniture; interior use only. Co n t a in er s : Qt., 1- and 5-gal. cans; 16- and 55-gal. drums for sealers and lacquers. Clear Wood Primer: A synthetic type primer for priming porous surfaces, such as wood, composition panels, etc. before application of "Preparakote" Primer-Surfacers. Co n t a in e r s : Qt. and gal. cans. Inside Body Gray Enamel: A varnish type enamel. Us e: For the inside of truck'bodies. Co n t a in e r s : Qt., 1- and 5-gal. cans. "Duco" Lacquers: Metalli-chrome, metallic and nonmetallic lines of lacquer colors, blacks and whites for spray application over recommended undercoats. Us e: For finish ing or reflnishing automobiles. Co n t ain er s : Pt., qt. and gal. cans. "Duco" Mixing and Tinting Colors: Pigmented lacquer colors for intermixing in conjunction with the Blending Machine for "Duco" lacquers. Require addition of clears before using. Also for use in tinting ready mixed "Duco" colors. Us e: For finishing or refinishing automobiles. Co n t a in e r s : Qt. and gal. cans. "Dulux" Clear--Exterior: A synthetic type clear for use on automotive vehicles as a clear coating over or mixed with "Dulux" enamel colors to increase gloss; a protective Lacquer Thinners: Used for thinning nitrocellulose and acrylic lacquer type products to spraying consistency. Co n t a in e r s : 1- and 5-gal. cans; 16-, 30- and 55-gal. drums. "Lucite" Acrylic Lacquer: Metallic and nonmetallic lines of acrylic lacquer colors, blacks and whites for spot and panel repair and overall refinishing on automobiles factory finished in "Lucite", "Magic Mirror" and other acrylic lacquers. CONTAINERS: Pt. and qt. cans. Masking Compound: A strippable compound for mask ing off glass areas and smooth plated metal parts of auto mobiles prior to painting. Not recommended for appli cation over plastic decorations or parts, rubber or any painted surfaces. Co n t a in e r s : Qt. and gal. cans. 28 DUP210011384 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials Metal Conditioner: An acidic, pre-finishing cleaner and conditioner for ferrous metals and aluminum, designed to remove rust and corrosion, etc., and to etch the metals for improved adhesion of finishing systems. Co n t a in e r s : Qt. and gal. bottles. Refrigerator Finishes: "Duco" lacquer and "Dulux" enamel finishes. For touch-up or over-all refinishing of ex teriors of refrigerator cabinets, kitchen cabinets, washing machines, home, farm and commercial freezers. Co n t a in er s : Qt. and gal. cans. Motor Enamel: A gray, varnish type enamel. Us e: For refinishing automobile and truck engines. Not suitable for exterior exposure. Co n t a in e r s : Qt., 1- and S-gal. cans. Paint Remover: A heavy-bodied, water-washable, non flammable product for removing all types of finishes, including baked enamels, lacquers and varnishes, from automobiles, commercial vehicles, aircraft, appliances, and other metal surfaces. Co n t a in e r s : Qt. and gal. cans. "Pyralux" Fluorescent Enamels, Clear and Reducer: A lacquer type, high visibility fluorescent enamel for safety and identification marking of commercial vehicles, aircraft and other vehicles. Also for sign work and advertising pur poses. Co n t ain e r s : Qt. and gal. cans. Primers and Primer-Surfacers: Retarder Thinner for "Duco" and "Lucite" Lac quers: Slow drying thinners to be added to "Duco" and "Lucite" lacquer topcoats for blush resistance and to im prove gloss. Co n t a in e r s : Qt., 1- and 5-gal. cans. "Rubbertone" Rubber Finish: A black finish for re newing appearance of rubber running boards, mats, tires, etc. Co n t a in e r s : Qt. and gal. cans. Rubbing Compounds: Mediums for producing gloss on "Duco" lacquers. Us e: In automobile refinishing. Co n t a in e r s : Qt., 1- and 5-gal. cans. Sealers: Automotive Bleederseal Sealer for Bleeding Colors: For use over and under both lacquer and synthetic type finishes to prevent discoloration of the topcoat, if under neath color tends to bleed. Co n t a in e r s : Qt. and gal. cans. Lacquer Type Primer-Surfacers: Lacquer type un Hi-Speed Lacquer-Type Automotive Refinish dercoats for use in touch-up and in building up repaired Sealer: Used in recommended acrylic lacquer systems metal areas on automobile bodies to a smooth surface to prevent sandscratch swelling, improves color hold-out prior to application of subsequent finishing coats. Co n and gloss. Also suitable for use over original nitrocellulose t a in e r s : Qt., 1- and 3-gal. cans, 16-and 55-gal. drums. lacquer and baked enamel finishes when followed by nitrocellulose lacquer topcoats. Co n t a in e r s : Qt. and Non-Sanding Primer: Quick drying synthetic type gal. cans. i primers for use under "Dulux" enamel or other synthetic Make-Ready Ready-to-Spray Primer-Sealers: For enamel topcoats only. For body steel, aluminum and use as a touch-up primer on bare metal spots under alloys of aluminum or old finish when no surfacing is either lacquer or synthetic enamel topcoats. Also for use required. Us e: For finishing automobile and truck bodies; as a sealer over lacquer undercoats, lacquer finishes, and applied by spray. Co n t a in e r s : Qt., 1- and 5-gal. cans. aged synthetic enamel finishes to prevent "sinking in" "Preparakote" Primer-Surfacers: Quick drying syn, thetic type primer-surfacers for use under "Duco" and of topcoats and as a color ground coat. Co n t a in e r s : Qt. and gal. cans. "Dulux" finishes. Fill and can be sanded. Us e: For finishing or refinishing automobile and truck bodies. Co n t a in e r s : Qt. and gal. cans. Solvents: Gun and Equipment Cleaner: An effective solvent for cleaning spray guns and other equipment. Co n t a in Spangled Galvanized Primer: A synthetic type er s : 1-gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. primer for use in priming spangled galvanized iron and certain coated metal surfaces. Co n t ain er s : Double compartment qt. and gal. cans. Lacquer Removing Solvent: For use in partially feather-edging damaged areas on lacquer finished auto mobiles prior to refinishing; also for quick removal of Zinc Chromate Primer: For use in priming inside of aluminum sheets on truck bodies to prevent corrosion lacquer finishes down to original factory undercoats. Co n t a in e r s : Qt., gal. cans and 5-gal. pails. caused by moisture. Also used for pre-priming contacting areas of aluminum with dissimilar metals to prevent rapid corrosion resulting from electrolysis. Co n t ain er s : Qt., 1- and 5-gal. cans. "Prep-Sol" Solvent: A safe solvent for cleaning old finishes of "Lucite", "Duco" lacquers, "Dulux" or synthetic enamels prior to sanding and refinishing with "Lucite", "Duco" or "Dulux" finishes. Co n t a in e r s : Putties: Lacquer-type "Speed Glaze" glazing and "Dulux" Qt., 1- and 5-gal! pails, 16-, 30- and 55-gal. drums. synthetic glazing and hard putties for filling imperfections on surfaces of automobile and truck bodies. CONTAINERS: 1-lb. tubes, qt. and gal. cans. Tractor and Implement Enamels: Pigmented semi alkyd products. Us e : To refinish tractors, farm equipment, road machinery, etc. Co n t a in e r s : Qt. and gal. cans. 29 DUP210011385 FINISHES DIVISION: Industrial Finishes INDUSTRIAL FINISHES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Chicago 46, Illinois Cleveland 14, Ohio Philadelphia (Wynnewood),Pennsylvania San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 308 East Lancaster Avenue 1600 Trousdale Drive, Burlingame SYcamore4-9581 ORchard 5-1010 MAin1-8516 TRinity8-2700 Oxford7-3870 PLANTS: Chicago 14, Illinois Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo 1, Ohio Tucker, Georgia 2100 Elston Avenue 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 PRODUCTS Acid and Fume Resisting Paints: A line of several grades and colors for maintenance use on wood and steel surfaces exposed to acid and alkali fumes. Co n t ain er s : I- and 5-gal. cans, 55-gal. drums. Adhesives: (See Cements). Cements: Beit Cements: Pyroxylin base cements used in the manufacture of leather belts requiring resistance to the effects of moisture. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Airplane Dopes and Finishes: Airplane dopes for use in Hot Melt Bookbinding Adhesives: Synthetic resin coating fabric surfaces. Airplane finishes, including under adhesives, solvent free, applied in melted form for book coats and topcoat finishes, for use on wood and metal binding purposes, principally binding together paper of surfaces. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. books, magazines, catalogs, etc., and adhering of outside Aluminum Mixing Vehicles: Oil base and synthetic resin base varnishes to be mixed with aluminum powder covers to magazines, catalogs, etc. Co n t a in e r s : Metal containers holding solid pack cf 50 and 95 lbs. or paste for use on wood or metal. Co n t a in e r s : 1- and 5- Household Cement (Waterproof Cement): A pyrox gal. cans, 55-gal. drams. ylin base cement having a wide utility in the repair of Aluminum Paints: Oil base and synthetic resin base ready mixed and ready-to-mix aluminum paints for use on exterior and interior wood and metal surfaces. Co n t ain er s : 1- and 5-gal. cans. articles made of wood, glass, ivory, leather, pearl or cloth. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Pyroxylin Cements: Pyroxylin base cements for use in cementing plastic facings to wooden heels by manu Aluminum Powder and Paste: Various grades for use facturers of women's shoes. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. in vehicles and bronzing liquids. Co n t ain er s : 1-, 2- and 10-Ib. cans, 50- and 100-lb. drums. ' Special Cements: A wide range of adhesives for an extended field of specialized uses pertaining to the prob Asphaltums, Air-Drying Types: Black enamels for lems of bonding various substances including "Mylar" application to metal. Co n t a in e r s : 1- and 5-gal. cans, polyester film and involving many modifications of 55-gal. drums. various application and curing methods. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drams. Bronzing Liquids: Of various types including pyroxylin base, oil base and synthetic resin base; used as vehicles for the application of aluminum powder, aluminum paste and bronze powder. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. Thermoplastic Cements: Used for cementing or lami nating various surfaces, such as metal foils, cloth, glass and sheets of metal that require the application of heat and pressure. These cements are applied to the surfaces ( "Budium" Polybutadiene Can Coatings: (See Tin and after thorough drying are ready for the necessary heat and pressure treatment required. Co n t a in e r s : 1- Decorating Finishes, Page 32). and 5-gal. cans, 55-gal. drums. 30 DUP210011386 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes Driers: Compounds used to accelerate the oxidation of a finish which contains drying oils. Co n t a in e r s : 1- and S-gal. cans, 55-gal. drums. "Duco" Furniture Lacquer, Clear and Flat: Used for finishing wood furniture. Co n t ain er s : 5-gal. cans, 55-gal. drums. "Duco" Furniture Lacquer Sealers: (See Furniture Lacquer Sealers). "Duco" Lacquer Enamels: Pyroxylin base enamels furnished in a wide Tange of colors and types for satisfying the finishing requirements of numerous industries. Applied directly to a surface or over undercoats, depending on the finish needed. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Fillers: Metal: A heavy paste type of filler used over under coats to smooth out imperfections in the metal. Co n t a in e r s : 5-gal. cans, 30-gal. drums. Wood: Available in paste or liquid form. Used for filling pores in wood as part of the preparation of surface for subsequent application of varnishes or lacquers. Co n t a in e r s : 5-gal. cans, 30-gal. drums. "Flintflex" Enamels: Enamel finishes of the synthetic resin type, employing "Dulux" resins but designed for interior use only. Available in air-dry and baking types. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Foil Lacquers: Clear and colored lacquers for roller coat ing application to aluminum foil. The clear may be tinted with alcohol soluble dyes. Co n t a in e r s : 5-gal. cans, 55-gal. drums. "Duco" Lacquer Metalli-Chrome Enamels: Metallic finishes producing unusual color effects of great durability. Applicable by spray only. Us e: Finishing of sheet metal parts. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Duco" Lacquer Penetrating Primers: Clear primers used in place of a sealer particularly in furniture finishing to give a high degree of scratch resistance. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Formvar Wire Enamels: (See Wire Enamels, Page 33). Furniture Finishes for Wood: (See Furniture Lacquer Sealers, "Duco" and "Dulux" Furniture Clears and Flats). Also all color components, stains, fillers, wash coats, toners, etc. as well as bleaching components (See "Du-Lite" Wood Bleach). Furniture Lacquer Sealers: Furniture Lacquer Sealers are used as a- preliminary coating which is processed with sandpaper and which is then followed by the required number of furniture lacquer topcoats. "Du-Lite" Wood Bleach System: A chemical treatment - employed to-bleach wood to light colors; "Dulux" Clear Exterior Finish: Synthetic resin base clears made in various formulations for different types of requirements and characterized by unusual flexibility and durability. Applicable either directly to a surface or as a topcoat over enamels for decorative and protective values. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. V'Dulux" Enamel and Paint Type Pigmented Fin ishes: Synthetic resin base enamels and paints furnished in a wide range of colors of various specific types to meet the finishing requirements of numerous industries. Applied directly to a surface or over undercoats, depending on the finish needed. Furnished in both air-drying and baking types. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Dulux" Wood Finish, Clear and Flat: Synthetic resin base clears for furniture finishing. The film must be cured by baking. Applied over a sealer. Co n t ain er s : 5-gal. cans, 55-gal. drums. "Duco" Furniture Lacquer Sealers are similar in composition-to clear- and fiat "Duco" Furniture Lacquers but are modified to permit easy sanding with conventional sand paper. Co n t a in e r s : 5-gal. cans, 55-gal. drums. "Tufcote" Furniture Lacquer Sealers differ from "Duco" Furniture Lacquer Sealers in that the former are modified to permit sanding with a special grade of sandpaper particularly suited for use with them. "Tufcote" Furniture Lacquer Sealers return better results than "Duco" Furni ture Lacquer Sealers with respect to film properties of toughness, scratch resistance and clarity. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Implement Finishes: For application by brush, dip or spray to various types of agricultural implements. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Insulating Varnishes: Used to waterproof and improve the dielectric properties of fabric covered electrical wires and cables. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Lacquers: (See Airplane Finishes, Bronzing Liquids, "Duco" Lacquers, Metal Lacquers and Paper Lacquers). Enamels: (Also see Asphaltums, "Duco", "Dulux", "Lecton" Acrylic Resin Wire Enamels: (See Wire "Flintflex", "Lucite" and Engenamel). Pigmented finishes Enamels, Page 33). available in various colors and in various types, such as pyroxylin base enamels, oil base enamels and synthetic "Lucite" Acrylic Lacquers for Industrial Use: Air resin base enamels. Available in air-drying and baking types. Applicable either directly to a surface or over under drying pigmented colored lacquers on acrylic resin base possessing much greater durability to exterior exposure | 1 coats, depending on the nature of the finish required. Applied by spraying, brushing, dipping or roller coating for protective and decorative purposes. Co n t a in e r s : 1- and than "Duco" Lacquer. Metal Lacquers: Clear pyroxylin base lacquers used as finishes direct to metal, as primers on metal for enamel 5-gal. cans, 55-gal. drums. coats and as topcoats over pyroxylin enamels. Co n t a in Engenamel: A red enamel (pyroxylin base) used as a er s : 1- and 5-gal. cans, 55-gal. drums. sealer coat for crankcases, transmission cases, gear cases, etc., of gasoline motors. CONTAINERS: 5-gal. cans, 55-gal. Methacrylate Clear Finishes: Clear solutions of acrylic resin for use over noncorrosive metals. Co n t a in e r s : 1- and drums. 5-gal. cans, 55-gal. drums. 31 DUP210011387 FABRICS AND FINISHES DEPARTMENT i FINISHES DIVISION: Industrial Finishes "NFL." Wood Stains: (See Stains, Wood, this page). Nylon Wire Enamel: (See Wire Enamels, Page 33). Paints: Pigmented finishes, available in various colors and in both oil base and synthetic resin base types; applicable by brush or spray either directly to surfaces or over suitable primers, depending on the nature of the finish required and surfaces to be coated. These products include metal protective paints, prepared paints for wood, flat wall paints and a wide variety of special paints for miscellaneous purposes. Many interior paints are available on an odorless basis. (See Trade Sales Finishes). Paper Lacquers: Gloss Lacquers: For use on overprint label stock, parchment, supercalendered clay coated papers, vul canized fiber and dense paperboard to obtain a high gloss and scuff resistance. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Grease and Oil Resistant Lacquers: For use on parchment, glassine, kraft and dense papers to provide grease and oil resistance. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Heat Resistant Lacquers: For use on paper plates or other stock where a degree of heat resistance is needed. Co n t a in e r s : 1- and 5-gal. cans,' 55-gal. drums. Heat Sealing Lacquers: For use on glassine, parch ment and dense papers where heat sealing only is re quired. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Meistureproof Heat Sealing Lacquers: For use on glassine, parchment and dense papers where both moistureproofness and heat sealing are required. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. Moistureproof Lacquers: For use on glassine, parch ment, vulcanized fiber and dense papers where moistureproofness only is required. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. Paste: (See Colors in Oil, Fillers, and Stencil Paste). Primers: Various general types, including pyroxylin base, oil base and synthetic resin base; used as the first or prim ing coat in a finishing system. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Putties: Oil base, synthetic resin and pyroxylin base putties, both of the hard type and glazing type. For use in finishing where the surface imperfections are too pro nounced to permit obtaining a smooth surface by the use of primer and surfacer coats. Co n t a in e r s : 1-, 5-, 10- and 22-lb. cans. Pyroxylin base putties also available in 1-lb. tubes. Pyroxylin Solutions: Mixtures of nitrocellulose and solvents made up in various combinations as lacquer bases; also made up in combinations according to customers' specifications. Railway Finishes: A complete line of exterior and in terior finishes for passenger train cars, locomotives, freight cars, stations, signal equipment, bridges, tractors and trucks. 32 Refrigerator Finishes: A complete line of "Dulux" high bake primers, and "Dulux" and ` `Lucite" high bake enamels for use on metal refrigerators. Co n t ain e r s : 5-gal. cans, 55-gal. drums, tank trucks (by special arrangement). Retarders: Exceptionally slow drying thinners, used with pyroxylin base lacquers or enamels, to retard speed of drying and for prevention of blushing. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. Sign Finishes: A complete line of finishes, including undercoats, "Dulux" sign enamels, "Dulux" stencil paste and "Dulux" dear sign finishes. For use on silk screen stencil; press printed, gum printed and lithographed metal signs. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Stains, Wood: Used under lacquer and varnish to in tensify and produce various grain effects on wood. Available in ready-for-use form involving choice of pigmented, oil soluble, water soluble and spirit soluble stains. Co n t ain er s : 5-gal. cans, 55-gal. drums. Also water soluble stains available in dry powder form in 5-lb. cans. Stencil Paste: (See Sign Finishes). Strippable Coatings: For various purposes such as coat ing spray booths, conveyor belts, etc., to catch and remove overspray. Also strippable coatings for temporary pro tection of idle equipment. Surfacers: Various general types, including pyroxylin base, oil base and synthetic resin base; used as a second or intermediate coat in a finishing system. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. "Teflon" TFE-Fluoroearbon Resin Finishes: Special finishes which must be cured by high fusing temperatures. They have outstanding corrosion resistance, high heat stability and anti-sticking properties. Co n t ain er s :T-pt., 1-qt. and 1-gal. glass containers. "Teflon" TFE-Fluorocarbon Resin Wire Enamels: (See Wire Enamels, Page 33.) Thinners: Appropriate combinations of solvents and diluents, used for the purpose of reducing the viscosity or consistency of finishes. Special grades available for various types of pyroxylin base, oil base and synthetic resin base finishes. Certain thinners used for pyroxylin base finishes may also be used to remove pyroxylin films and grease from surfaces which are to be refinished. (Also see Re tarders, this page.) CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. Tin Decorating Finishes: Varnishes and enamels, both oil base and synthetic resin base, including "Budium" polybutadiene finish for application to tin plate which, after baking, is formed in dies to produce various types of metal containers. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Undercoats: (See Primers and Surfacers). Varnishes: Clear finishes for application by brush, dip or spray; made from drying oils combined with natural resins or synthetic resins for application to various surfaces for the deposition of films which serve to protect or enhance the appearance of surfaces. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. \ DUP210011388 FINISHES DIVISION: Industrial Finishes Washing Machine Finishes: A complete line of "Dulux" high bake primers and "Dulux" and "Lucite" high bake enamels for use-on metal washing machines. CONTAINERS: o ga . cans, ao ga . rums. Waterproof Cement: (See Cements, Page 30). . Wiping Stains: Fast drying pigment wiping stains. (See Stains, Wood). w-re Ename|s; Coatlngs whlch on bakhlg give enamel- appearance; used for application to electrical wire for the purpose of providing insulation. Co n t ain er s : 53-gal. drums, tank cars. \ 33 DUP210011389 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Specialties Sales SPECIALTIES SALES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PLANTS AND WAREHOUSES (Combined): Columbia, Tennessee (Sponges) Flint 2, Michigan (Chemicals and Sponges) Hamilton Avenue and St. John Street TELEPHONE FRospect 4-1000 PRospect 4-1000 EVergreen 8-5632 CEdar 2-1104 WAREHOUSES: Los Angeles 22, California Oakland, California (Auto and H. H. Sponges) Portland, Oregon 2000 South Garfield Avenue 1020 East 8th Street 5510 S. E. McLaughlin Boulevard RAymond 3-8401 HIgate 4-1980 BEhnont 6-1139 "7" AUTOMOTIVE SPECIALTIES PRODUCTS Acid and Rust Inhibitor: A patented, economical chemi cal inhibitor for automotive cooling systems to help keep them rust free. It dissolves quickly, prevents rust from forming and neutralizes acids. Not recommended for systerns with aluminum components. Mixes readily with all standard type anti-freezes. Co n t a in e r s : &\4 oz. Bug Remover: A cleaning powder for removing bug residue from car finishes and chromium. Contains "DuponoT' surface active agent in combination with other ingredients. Reacts, quickly- on- the bugs--without harming the car finish. Can also be used for cleaning windshields and headlights. Co n t a in e r s : 8 oz., 1 lb. i All Purpose Sealer: Seals leaks in auto windshields and rear windows. Also for sealing leaks in garden hose, water pails, gas tanks, gaskets, plumbing fixtures, radiator hoses, Car Soap: An economically priced car washing detergent for shop use. Concentrated formula will not streak. Co n t a in e r : 75 lb. i i hot water tanks, laundry tubs, rubber footwear, small boats, rain spouts, and metal containers. Co n t ain er s : 1%-fl. oz. Car Wash: A soapless detergent which, when dissolved in J tubes. ' water, makes car washing easy. Removes dirt and grease quickly and safely. Makes drying unnecessary. Easy on ia Anti-Rust and Water Pump Lubricant (Liquid): the hands and car finish. Co n t a in e r s : o z., V, 4, 16 and Helps prevent both electrolytic and chemical corrosion in 601b. *3 cooling system. Lubricates water pump--eliminates squeaks. Works in plain water or any standard anti-freeze Cellulose Sponge: (See Household Specialties and Marine solutions. Harmless to all parts of cooling system, in Specialties, Page 36. cluding aluminum. Just pour liquid into radiator. One pint is sufficient for a cooling system holding 22 quarts or less. Chrome and Metal Polish: A speedy cleaner, polish and Recommended for passenger cars, trucks, tractors, buses. rust remover for chrome plated bumpers and other auto Co n t a in e r s : 12 oz. fittings. Polishes nickel, brass, copper and stainless steel. Auto Wax: An easy polishing paste wax for auto finishes. Produces a brilliant, durable luster and protects the finish Produces a brilliant luster. Also recommended for home and shop uses. Co n t a in e r s : 12 oz. from dirt, moisture and ultraviolet rays of the sun. Co n t a in e r s : 7 oz. and 1 lb. Clear Rubber Dressing: Makes black, white or colored rubber look like new. Does not soak in, easy to use, tack free. Mixes with equal parts of water. Excellent for colored Brake Fluid, Heavy Duty: A very high quality brake floor mats. fluid that meets or surpasses rigid S.A.E. specifications and Federal Specification WH-910. Us e: In all automotive hydraulic brake systems under severe or moderate operat ing conditions. Co n t ain e r s 1:2 oz., 1 qt., 1- and 5-gal. cans, 30- and 54-gal. drums. ' Clear Windshield Sealer: A clear, waterproof cement for stopping leaks at windshields' and rear window frames. Dries quickly and adheres firmly to glass, metal and rubber, making a tight, permanent, waterproof seal. Co n t a in e r s : llq-fl. oz. tubes. Brake Fluid, Super Heavy Duty: A super heavy duty brake fluid formula which meets or exceeds Super Heavy Duty Specification SAE 70R3 and Heavy Duty Specifica tion SAE 70R1 and Federal Specification WH-910. Us e: In all automotive hydraulic brake systems under severe operating conditions. Co n t a in e r s : 12-oz., 1-qt., 1- and 5-gal. cans, 30- and 54-gal. drums. Cooling System Cleanser: A heavy duty, acid type cleanser which cleans badly clogged radiators by actually dissolving rust, scale and grease without injury to hose packings or gaskets. Not recommended for use in systems with aluminum components. Does not require reverse flushing. Co n t a in er s : Lb. 34 DUP210011390 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Specialties Sales j ! i ; ! j | j ! j | 1 }------ | | ' _ ' Coaling System Sealer: Stops and prevents leaks in automotive radiators and cooling systems quickly, without clogging the passages. Harmless to hose and metal parts, Mixes readily with all standard types of anti-freeze. Co n t a in e r s : 12 oz. "Dissolvo" (Solvent) Tar and Road Oil Remover: A safe solvent for removing tar, road oil, old wax, Spray Glaze and silicone automobile polishes. Safe for all auto mobile finishes. Co n t a in e r s : 12 oz., 1 gal. "Duco" Cement: A transparent, flexible, waterproof ad hesive used in the manufacture or repair of articles made of wood, glass, china, metal, ivory, leather, paper or fabrics. Patented applicator tip keeps cement off fingers, permits application to small areas. Co n t a in e r s : %-fl. oz. tubes, 1%-fl. oz. tubes (12 to display carton). Fast Flush: A maintenance-type liquid radiator cleaner designed for routine use in spring and fall to maintain maximum cooling system efficiency. Safely disperses grease, rust and scale in 10 to 30 minutes. Requires no neutralizer, just flushing with water. Will not harm rubber or metal cooling system parts. Co n t a in e r s : Pt. Foam Cleaner: A liquid concentrate, to be diluted with water and the foam used for cleaning carpets, rugs and upholstery. Cleans both flat weave and pile fabrics. Gives them a fresh, new look. Is safe and easy to use. The diluted liquid is also an excellent paint and woodwork cleaner. Co n t a in e r s : Pt. Gas Guard: A premium grade fuel system anti-freeze which-prevents ice forming-in the gasoline lines of cars, trucks and tractors. Eliminates stalling and sputtering caused by the presence of water in the gasoline. Con tributes to quicker starting and smoother engine perform ance, even in subzero weather. One pint every 1,000 miles will give adequate protection. Co n t a in e r s : 12 oz. Glass and All-Purpose Cleaner: An economical, con centrated cleaning fluid that cuts grease and grime efficiently and safely. Cleans vinyl automobile upholstery, wind shields, walls, woodwork, gas pumps, soft drink coolers, and other glass, metal or painted surfaces. Will not smear, leaves no film, economical to use. Co n t ain e r s : Qt., gal. "Glow" Liquid Car Wash: For those who prefer a liquid car wash. Removes dirt, oil, grease but not existing wax on finish. Will not streak, dries without wiping. Heavy Duty Stop-Leak: For repairing cracked cylinders, engine blocks and water jackets in cars, tracks, buses and tractors. Will not harm hose or metal parts nor clog the system. Also recommended as a heavy duty stop-leak. Mixes readily with all standard type anti-freeze solutions. Co n t a in e r s : Pt. "Jet Clene": A cleaner for car upholstery--vinyl, plastic, "Fabrilite", plastic coated fabrics and leather. Also ex cellent for cleaning spots from all household upholstery, textiles and rugs. Co n t a in e r s : 12 oz. aerosol. Liquid Tire Black: A ready mixed, black dressing for automobile tires, rubber mats and running boards. Dries quickly to a satin finish. CONTAINERS: Pt. M.O.A. -- Motor Oil Additive: A crankcase lubricating oil additive effective in reducing oil consumption and in reducing the formation of sludge formed during "stop and go'' driving. Co n t a in e r s : 15 oz. cans, 5 gal., 30 gal. drums. New Car Wax: A triple-action paste wax especially formu lated for use on new cars and those with finishes in ex cellent condition. Cleans with an "easy on the finish'' cleansing action. Waxes with a hard, solid paste wax that protects. Glazes with a brilliant, durable weatherproof coating. Co n t a in e r s : 8 oz., 134 lb. "Orel" Rubber Lubricant: Harmless to rubber, yet effectually penetrates and lubricates rubber shackles and all rubber parts. Co n t a in e r s : Gal. "Pro-Tek" Protective Hand Cream: A greaseless cream which, when rubbed on the hands and arms, protects against paint, lacquer, grime, grease, thinner and many chemicals. It washes off easily and takes the dirt with it. Co n t a in e r s : 8-oz., 1 and 5 gal. Rubber Dressing: A black liquid concentrate for thinning with eight parts or more of lead-free gasoline to make an excellent tire dressing. For use by service stations and re treading shops on tires, rubber mats and running boards. Co n t a in e r s : Qt., gal. "7" Polish: An excellent cleaner and polish for all car finishes--new or old. Rubbed on; when dry it is wiped off with a clean cloth. This removes all dirt and chalked pig ment, restoring original color and luster. Co n t a in e r s : Pt., qt., gal. "7" Rubbing Compound: A strong, abrasive cleaner for removing scratches and blemishes from auto finishes. Excellent for cleaning severely weathered finishes before waxing. Can be used for rubbing down newly sprayed finishes. Produces a smooth surface easily and quickly. Co n t a in e r s : 12 oz., 1 qt., 1 gal. "Shield": A new formula developed to shield the beauty of all car finishes, especially the new acrylic lacquer and improved enamels used by major car manufacturers. "Shield" can be applied to a new car four days after the car has been painted in manufacture. It sets up a hard "repellent shield" between the car finish and dulling dirt, traffic film--actually improves scratch resistance of new car finishes. One application of "Shield" lasts for months. Car can be washed sparkling clean, quickly and easily. Grime does not stick. Co n t a in e r s : 1 pt. "Slipspray": An all-purpose, dry lubricant for use in the home, shop or office. "Slipspray" is stainless, odorless, wax less and colorless. Contains no oil or silicone. Makes every thing slide easier and work better--drawers, locks, windows, doors, screens, zippers, etc. May be applied to any surface --paint, car finishes, rubber, glass, plastic, leather and fabrics. Not affected by water, oil or solvents--will not flush off, freeze or melt. Co n t a in e r s : 8 oz. aerosol. Speedy Cleaner: A liquid cleaner for all auto finishes. Removes chalked pigment, traffic film, wax, Spray Glaze and silicone polishes quickly and safely. Especially recom mended for use before applying wax. Co n t ain er s : Pt., gal. Spot Remover (Dry Clean): A nonflammable cleaning fluid, leaves no odor and does not shrink fabrics; recom mended for all colorfast garments, gloves, draperies, up holstery and fine fabrics; removes grease, wax, fresh paint, gum, adhesive tape and road tar. Co n t a in e r s : 8 oz., 1 gal. 35 DUP210011391 FINISHES DIVISION: Specialties Sales Spray Glaze: A beauty treatment for automobiles, designed for use in a shop or service station. It produces a higher luster and has greater durability than waxes, yet requires less time and labor to apply. After the car finish is cleaned in the usual way, simply spray on Spray Glaze and wipe it off. This leaves a dry, brilliant shine without further polishing. Co n t a in e r s : Gal. Spray Glaze Cleaner No. 1: A heavy duty cleaning com pound designed for use by hand before applying Spray Glaze. Removes traffic film, chalked pigment and old wax quickly and safely. Suitable for all car finishes--new or old, lacquer or synthetic enamel. Co n t a in e r s : Gal. Spray Glaze Cleaner No. 2: Formulated primarily for use with electric polishing machines before applying Spray Glaze, but may be used by hand on new cars and others whose finish is in excellent condition. Suitable for both standard and feeder type machines. Co n t a in e r s : Gal. Waterless Hand Cleaner: A solvent type cleaner that removes dirt, grease, grime, paints, oils, carbon, tar and shellac. Contains lanolin to help prevent skin irritation. Co n t a in e r s : 8 oz,, 28 oz,, 5 lb. White Polishing Compound: A moderately strong cleaner for removing heavy traffic film and chalked paint pigment from the car finish. Can be used on all colors and all types of car paints. Excellent for removing scratches and stains.- Co n t a in e r s - 12 oz., I qt. and 1 gal. " "Combo" Synthetic Sponge: Multi-purpose, two sided sponge that scrubs and scours on one side, absorbs and wipes on the other. Special abrasive, nonscratching poly urethane side does the scrubbing--conventional cellulose side performs normal wiping function. Cellulose Sponge Cloth: Extra-soft, lintless and absor bent when wet. Has exclusive built-in fiber reinforcement for longer wear. Us e: All-purpose household size for dish washing, woodwork, windows, etc. A Commercial size is offered in the sanitary supply trade, for industrial-institu tional cleaning. Automotive Specialties sells larger size to automotive and hardware trades. Cellulose Sponge Yarn: Cotton yam core covered with cellulose sponge. Wound on ball multiple-end warps and single-end spools. Available in )4 in- (buff or green) and Yl in. (green only) diameters. Us e: For converter use in manufacture of household and industrial wet mops, and for weaving into cloths, pads, coaster mats, etc. "7 SEAS" MARINE PRODUCTS All-Purpose Sealer: Seals leaks in boat windshields and windows. Also for sealing leaks in water lines, gas tanks, gaskets, small boats, and metal containers. Co n t a in e r s : fluid-oz.' tubes. White Wall Tire Cleaner: Cleans white wall tires easily, Bilge Cleaner: A fast, easy, effective agent for removing safely and economically. Co n t a in e r s : Pt., gal. oil, grease, and scum from boat bilges. DuPont Bilge Windshield Washer Solvent: A concentrated detergent anti-freeze solution for year-round use in windshield washers. Guards against solution freezing in winter and aids in removing bugs, grease and dirt during summer driving. Co n t a in e r s : 6 oz. 2-4-1: An economical cleaner and polish for all car finishes. Cleaner will homogenize these contaminants with the water to be pumped overboard through the bilge pump. Leaves bilge fresh and clean. Reduces possible fire hazard. Also handy for removing water-line scum and oily accumu lations on engine blocks and other surfaces. CONTAINERS: 12 or. Quickly and easily cleans dull and oxidized paint leaving a Block-Moisture and Corrosion Control: An easy to sparkling clean surface. Co n t a in e r s : Pt. apply aerosol liquid spray. Block deposits an invisible, long-lasting anti-corrosion film on any surface. It dries wet electrical and ignition systems by creeping under the HOUSEHOLD SPECIALTIES PRODUCTS moisture and displacing it. Wet engines start in a jiffy. Stops shorting and static interference due to moisture in Cellulose Sponge: Highly absorbent, soft and resilient radio and electrical equipment. An excellent penetrating when wet, long-lasting. It will not scratch, can be sterilized lubricant, too, for loosening corroded fittings. Co n t ain er s : by boiling, not affected by ordinary cleaning compounds. 8 oz. Pine and coarse pore types are available. Us e: Com- j mercially for many purposes, such as washing walls and Boat Bottom Cleaner: Cleans algae and scum from boat i painted surfaces, windows, etc.; in the home, for washing bottoms quickly. Especially effective in salt water areas j dishes, general cleaning and in the bath. for removal of grass growth from fiberglass hulls and out board lower units. In fresh water areas it provides an easy AVAILABLE f o r ms : Convenient sizes in the regular buff shade for general cleaning purposes and in various pastel means of removing river scum. Co n t ain e r s : Pint and 1 gal. cans. shades for use in the home. Also cut to specified sizes for converters, or specialized industrial uses. Boat Polish: An easy-to-use polish and cleaner for fiber Standard size, packaged sponges are sold through brokers and agents to grocery, drug, variety store, sanitary supply outlets. Automotive Specialties sells to automo tive and hardware trades. (See above). Fine pore packaged glass, painted, and/or varnished boat surfaces. Rubbed on; when dry it is wiped off with a clean cloth to remove all dirt and chalked pigment, providing a highly polished boat finish. Co n t a in e r s : Pt. sponges for photographic use are sold by Photo Products Department (See Page 90). Special sizes for converters and industrial users are also sold by Household Specialties. Boat Soap: An all-purpose, highly-concentrated liquid detergent for fast, easy, cleaning above and below decks. Only one to two teaspoonfuls needed in each gallon of water. Hulls, decks, bulkheads, bright work, dishes . i "Turtleback" Car Washing Sponge: A sponge particu everything washable on board can be made sparkling clean larly designed for use in washing automobiles and trucks. with this product. Removes oil stains and scum. Works 36 DUP210011392 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Specialties Sales equally well in fresh, salt, hard or soft water. Won't streak. Co n t ain e r s : 12 oz. Boat Wax: A combination paste wax formulated for use on all boat finishes. A mild cleaning agent incorporated in the wax helps remove any minor finish oxidation and surface scum. The tough, durable, camauba wax provides a brilliant luster while protecting the surface with a dura ble, weatherproof coating. Co n t a in e r s : 8 oz. Will not stiffen, shrink or discolor fabrics. May be applied with brash, swab or spray. Long-lasting. Co n t a in e r s : Qt. and Gal. Show Boat Metal Polish: Removes rust stains and gives a brilliant luster to marine metal trim quickly--easily. For use on all metals, including chrome, brass, copper, nickel, stainless steel and anodized aluminum. Keeps blight metals sparkling. Co n t a in e r s : 12 oz. Engine Cleaner and Degreaser: A liquid concentrate which may be sprayed on engines and parts for removing oil and grease accumulations. Engines may be cleaned by spraying the material on, allowing to stand for a few minutes, then hosing off with water. When used on in boards, the residue may be pumped overboard through the bilge pump. On outboards, merely hose off with water. Bulk sizes also available for cleaning engine and boat parts. Excellent for cleaning outboards prior to winter storage. Co n t a in e r s : 16 oz. aerosol, 1-, S-, 30- and 55-gal. cans. Heavy Duty Fiberglas Cleaner: A strong, abrasive cleaner for cleaning severely weathered Fiberglas finishes before polishing or waxing. Prepares a surface for polishing or waxing, easily and quickly. Also excellent for oxidized paint finishes. Co n t a in e r s : 12 oz. Perk Marine Oil Additive: A marine crankcase oil addi tive that reduces engine wear, cuts costly repairs, saves oil and promotes smoother running of marine engines. It pre vents harmful sludge and keeps engines clean. Works well with all motor oils. To maintain new engine performance, use withrevery oil change; Co n t ain e r s : 15 o z. Plastic Windshield Cleaner: An excellent cleaner and polish for all plastic windshields and windows. Quickly removes dirt, scum and light surface scratches. CONTAIN ERS: 8 oz. Scratch Remover: Formulated especially for removing deep scratches from plastic windshields and windows. Co n t a in e r s : 2 oz. Spark Marine Fuel Additive: A marine fuel additive that inhibits gum formation in fuel tanks, lines and car buretors. Spark Marine Fuel Additive also absorbs water in gasoline and diesel fuels caused by condensation. Assists quick starting, helps maintain full pep and power, keeps engines running smoothly. For diesel and gasoline powered inboards and outboard engines. Co n t a in e r s : 6 oz. out board size, and 12 oz. inboard size. MARINE SPONGE PRODUCTS "Captain's Combo" Synthetic Sponge: Multi-purpose, two-sided sponge that scrubs and scours on one side, absorbs and wipes on the other. Special abrasive, non scratching polyurethane half does the scrubbing--conven tional cellulose half performs normal wiping functions. Deckhand Sponge: A big, husky sponge that is excellent for cleaning large topside areas. It also doubles as a bailer. Galley Sponge: An all-purpose cleanup sponge that has thousands of uses on any boat. Specially shaped for use in the galley. Easy to grip--easy to use. Giant Deckhand: A giant size sponge for giant size jobs on board boat. Especially useful for large bailing jobs. Seaturtie: An exclusive DuPont Sponge. The flat side washes, the curved side has a skinlike backing that is excellent for wiping and drying. Handy for many cleaning jobs around the boat. "Slipspray" All-Purpose Dry Lubricant: A totally dif ferent kind of lubricant. Sprays clean, stays clean--dries instantly. Makes everything slide easier--works on any surface. Odorless, colorless, stainless. Will not leave greasy or oily film. Retards corrosion on battery terminals, tools, electrical connections. Co n t ain e r s : 6 oz. aerosol. Snug Canvas Water Repellent: An excellent water repellent dressing for boat covers, boat awnings, tarpaulins, and all heavy doth boating accessories. Snug repels water and helps preserve canvas. Improves weather resistance. Cellulose Sponge Cloth: This reinforced cellulose sponge cloth, a new DuPont discovery, makes boat washing a snap. It washes like a cloth, absorbs water like a sponge, and wipes like a chamois. Made of versatile cellulose, it's molded on a center screen of tough fibers for extra strength, durability, and tear resistance. Soft to the touch, it's self cleaning, rinses fresh and clean, and leaves no lint. Super Scooper Sponge: Especially shaped to bail boats fast and easy. Squeezes dry with light pressure--bounces back ready for more. 37 DUP210011393 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes TRADE SALES FINISHES I GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Boston (Waltham) 54, Massachusetts Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Detroit 2, Michigan Kansas City 41, Missouri Philadelphia (Wynnewood), Pa. San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 45 Fourth Avenue 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 5-238 General Motors Building 6001 Manchester Trafficway 308 East Lancaster Avenue 1600 Trousdale Drive, Burlingame SYcamore 4-9581 TWinbrook 9-8300 ORchard 5-1010 MAin 1-8516 FLeetwood 7-4611 TRinity 5-1990 EMerson 3-1390 TRinity 8-2700 OXford 7-3870 PLANTS AND WAREHOUSES (COMBINED): Chicago 14, Illinois Everett 49, Massachusetts Fort Madison, Iowa Philadelphia 46, Pennsylvania SouthSan Francisco, California Tucker, Georgia 2100 Elston Avenue 59 Waters Avenue Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 Post Office Box 487 WAREHOUSES: 1 Albany 5, New York 1 Amarillo, Texas | Atlanta 18, Georgia | -. Baltimore 18, Maryland 1 ' Bangor, Maine 1: Birmingham 3, Alabama I Buffalo 25, New York 8 Canton 2, Ohio a Charlotte 3, North Carolina j ; Chicago 31, Illinois i ; Cincinnati 3, Ohio j : Cleveland 14, Ohio , ' Columbus 12, Ohio Dallas 21, Texas : Davenport, Iowa I Denver 2, Colorado Detroit 34, Michigan Fresno 1, California Hartford 10, Connecticut Houston 11, Texas j| Indianapolis 7, Indiana Jacksonville 1, Florida Kansas City 41, Missouri Knoxville 17, Tennessee Long Island City 3, New York Los Angeles 22, California I Louisville 16, Kentucky Memphis 4, Tennessee Miami, Florida Milwaukee, Wisconsin I| Minneapolis 4, Minnesota ; Nashville 3, Tennessee :j New Orleans 25, Louisiana Oklahoma City 5, Oklahoma ji Pennsauken, New Jersey ! 38 116 Railroad Avenue 900 South Georgia Street 1737 Ellsworth Industrial Drive, N. W. 400 East Twenty-Ninth Street 109 Hildreth Street 2301 Fifth Avenue, South 1696 Walden Avenue 205 Reynolds Place, S. W. 2500 South Boulevard 7327 West Agatite Avenue, Norridge 3001-17 Vine Street 3137 Chester Avenue 1450 Dublin Road 8510 Ambassador Row 1528-30 West Locust Street 555 Quivas Street 19930 Conner Avenue 1133 Belmont Ave. 635 New Park Avenue, West Hartford 332 South Wayside Drive 1825 West Eighteenth Street 2256 Dennis Street 6015 Manchester Trafficway 510 Williams Street 48-05 Van Dam Street 2000 South Garfield Avenue 3927 Park Drive, Shively 1573 Union Avenue 1730 N. W. 23rd Street 5200 North 124th Street 4317 Excelsior Boulevard 1406 Broad Street 4401 Euphrosine Street 208 East Hill Street 7300 Crescent Boulevard ALbany 2-5711 DRake 3-2631 SYcamore 4-9581 TUxedo 9-6053 BAngor 2-0554 FAirfax 2-8775 KEystone 8242 GLendale 2-9830 EDison 2-3177 NAtional 5-7650 UNiversity 1-3414 MAin 1-8516 HUdson 6-7193 FLeetwood 7-4611 DAvenport 2-2861 AComa 2-8945 FOrest 6-2245 ADams 7-4474 ADams 3-8297 WAlnut 3-2521 MElrose 8-5593 ELgin 3-7461 EMerson 3-1390 STillwell 6-0200 RAymond 3-8401 EMerson 8-1659 BRoadway 6-2745 NEwton 3-9815 HOpkins 3-0260 WAlnut 7-9797 ALpine 5-8486 AUdubon 6658 JAckson 5-2194 NOrmandy 5-2720 DUP210011394 l REHOUSES (Continued): Pittsburgh 5; Pennsylvania Portland 3, Maine Portland 2, Oregon Providence 3, Rhode Island Roanoke 5, Virginia Rochester 13, New York Sacramento, California Saginaw, Michigan Salt Lake City 4, Utah Seattle 9, Washington Spokane 2, Washington Springfield 4, Massachusetts Springfield, New Jersey Springfield, Pennsylvania St. Louis 10, Missouri Syracuse, New York Tampa 2, Florida Toledo 10, Ohio Youngstown 3, Ohio 2222 Noblestown Road 255 Forest Avenue 5510 Southeast McLoughlin Boulevard 217 Broad Street 2710 Franklin Road, S. W. 95 La Grange Avenue Folsom Boulevard and 60th Street 2506 Weiss Road 990 South Sixth Street, West 525 Boren Avenue, North East 1035 Cataldo Avenue 233 Page Street 15 Stem Avenue 730 Baltimore Pike 2300 Hampton Avenue Bridge Street, East 304 South Franklin Street 330 West Central Avenue 3203 Southern Boulevard ' TELEPHONE WAlnut 1-7000 SPruce 2-4657 BElmont 6-1139 GAspee 1-2709 Diamond 2-3176 GLenwood 3-2530 GLadstone 1-1074 SWift 2-0822 EMpire 4-3582 MAin 2-4165 HUdson 3-8111 REpublic 2-6216 DRexel 6-6070 KIngswood 3-2126 Mission 7-0208 GRanite 2-0451 TAmpa 2-2414 CHerry 1-2197 STerling 8-9688 PRODUCTS The following products are available in a wide variety of specialized products in this field are vinyls, phenolics, package sizes. Details on sizes available by each item can epoxies, elastomers, etc. readily be determined by contacting any of the above listed locations. Acid and Fume Resistant Paints: Made especially for -------------------- ALUMin u m p a in t s .................. resisting the corrosive action of acid fumes, spill of weak \ acids. Resin Base: Chinawood, phenolic resin. Us e: In Aluminum Paint--Ready Mixed: A smooth flowing, terior or exterior where the abnormal conditions described brilliant aluminum finish for general interior and exterior exist. use. Resin Base: Soya, chinawood, petroleum resin. Us e : Masonry, brick, concrete, cement, metal roofs, structural Chemical Resistant Coatings: Available in primer, in steel, as a sealer for knots and sap streaks in wood. termediate and various colored topcoats. Resin Base: "Dulux" All-Purpose Aluminum Paint Ready Mixed: A brilliant aluminum finish of unusual durability for ex Vinyl resin. Us e: For interior and exterior use where ex treme resistance to abnormal chemical exposure is required. terior and interior use. Us e: Masonry, wood, brick, con "Dulux" Fume Resistant Yellow: For use in place of crete, cement, metal roofs, structural steel, tanks and Safety Color Code High-Visibility Yellow in chemical galvanized metal surfaces which have been properly primed. plants. Resistant to discoloration from hydrogen sulfide and fading in acid or alkaline atmospheres. Heat Resistant Aluminum Paint Ready Mixed: A brilliant aluminum finish. Us e: Exterior and interior use on hot surfaces; will withstand continuous temperatures up to 400F. exterior; 800F. interior. Epoxy Chemical Resistant Finishes: Resin Base: Polya mide catalyzed epoxy resins. Us e: Exterior and interior surfaces exposed to chemical fumes and occasional splashes. Hi-Heat Resistant Aluminum Paint: A brilliant, dura COLOR CONDITIONING ble, smooth flowing ready-to-mix aluminum finish for use on hot metal surfaces. Resin Base: Silicone resin. Us e: Stacks, breechings, boiler fronts and other metal surfaces subjected to heat of 400F. to 600F. exterior; 400F. to 900F. interior. A proved practical plan for the use of color, developed by DuPont paint technicians working in collaboration with lighting and color specialists. Color Conditioning makes scientific use of color to im prove seeing conditions and increase efficiency in industrial Phenolic Aluminum Paint--Ready-to-Mix: Resin Base: Linseed oil, phenolic resin. Us e: Exterior and interior surfaces where resistance to moisture and mild acid fumes is required. plants, stores, hospitals, schools, offices and all types of public buildings. Color Conditioning eliminates glare, reduces eyestrain and fatigue, makes color and light work together. Color Conditioning insures the selection of the right color for all CHEMICAL RESISTANT FINISHES interior surfaces. It has been tried and proved under Corrosion resistant finishes are available to protect prop actual operating conditions. erty from chemical attack in all phases of industry. When Three Dimensional Seeing, a part of Color Conditioning, and where such conditions prevail, it is advisable to have embodies the principles of applying focal colors to machine our representative investigate the individual problem and tools to provide maximum visibility at the critical seeing write the painting specifications. Such inquiries are wel area and the right color to the body of the machine, re l come and will receive prompt attention. Typical of sulting in improved production, fewer seconds or rejects, 39 DUP210011395 |MBflB2cSc& FINISHES DIVISION: Trade Sales Finishes and reduction in accidents. Safety Color Code, a part of Color Conditioning, comprises a uniform system of colors for identifying industrial hazards, thus contributing to industrial safety. Color Conditioning Interior Flat Wall Enamel: A flat wall finish with easy working properties which dries to a fine-textured finish. Odorless formula means no pungent solvent odor during application. Excellent hiding, easy lapping, fast application. Acts as its own sealer over many surfaces. Dries overnight to a matte finish that can be easily washed. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "Dulux" Color Conditioning Interior Gloss Enamel: Especially developed shades in full enamel finish; dries with a hard surface; highly resistant to marring; durable; washable. Odorless formula. Resin Base: Soya-linseedalkyd resin. Us e: Especially suited for use on dadoes, trim, cabinets, and similar surfaces in homes, factories, schools, institutions where unusual durability is required. "Dulux" Color Conditioning Interior Semi-Gloss Enamel: A new "Dulux" semi-gloss finish for walls, ceilings, woodwork, cabinets in residential and commercial buildings. Easy application, excellent hiding and self-level ing. An extra-hard, durable finish that withstands repeated washing. Odorless formula. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls, ceilings and trim. "Dulux" Color Conditioning Machinery Enamel; * A hard drying enamel for use on machinery and equipment, both indoors and out. Excellent resistance to chipping, grease and oil. Fast drying, extremely tough and durable. The colors in this line are those generally used by industry to carry out the principles of Three Dimensional Seeing. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior: metal and wood surfaces; stationary and mobile machinery, plant equipment, pipe lines, etc.; farm and road machinery, vehicles, tools. "Dulux" Color Conditioning Safety Color Code En amels: These finishes make possible a system of color identification to promote safety. A high gloss durable finish for any type of surface--inside and out. Approved by the National Safety Council and American Standards Associ ation. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior: metal, wood and masonry. Farm and road machinery, vehicles, tools. CUSTOM COLOR SYSTEM The Custom Color System affords the professional and amateur decorator a choice of hundreds of odorless Custom Colors for interior painting. Universal Tinting Colors in tubes are added to Blending Bases to provide matching colors in Flat Enamel, Semi-Gloss Enamel, Gloss Enamel and "Flow Kote" Rubber Base Wall Paint. Universal Tinting Colors can also be added to 42 Chalk Resistant White House Paint; "Dulux" Stucco, Shake and Shingle Paint Tinting White, and "Dulux" Trim and Shutter White to arrive at specific durable exterior colors. With the Custom Color System, the dealer has a choice of two methods of dispensing colorants: (l) Various size tubes of Universal Tinting Colors which are hand-squeezed into desired bases; (2) Universal Tinting Colors machinedispensed through the DuPont Color Master mixing machine. "DUCO" FINISHES "Duco" Gloss Enamel: Quick drying enamel with dura bility, good flow', excellent hiding power. Dries to handle in a few hours. Odorless formula. Resin Base: Soya-linseedalkyd resin. Us e: Finishing furniture, indoors and out. Interior woodwork and walls, especially in kitchens and baths. Lawn furniture. "Duco" Satin Sheen Enamel: Our highest quality semi-gloss enamel; high-hiding, quick-drying, easy brush ing, smooth flowing; washable, durable. Formulated with odorless solvents. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls, ceilings, trim and furniture, where a satin-like sheen is desired. "Duco" Spray Magic Enamel: "Duco" Enamel in an aerosol can, white and colors. Handy, push-button spray application especially useful for appliances, tools, radiators, furniture, screens, and bicycles. Quick drying; hard, glossy finish. Us e: Clean wood or metal surfaces, interior and exterior. ENAMELS AND UNDERCOATS Alkali Resistant Enamel: A medium gloss, chlorinated rubber base paint to serve as priming and finishing coats on surfaces subjected to abnormal exposure to alkali and moisture. Us e: Unfinished interior cement and concrete floors and other interior unpainted masonry surfaces where alkaline conditions may develop due to dampness. Also recommended for use on protected exterior concrete floors subject to dampness from beneath. In industry where corrosive alkalies and moisture conditions exist. "Black Jack" Sash and Screen Enamel: A low cost, high gloss black utility enamel. Us e: For interior use on wood and metal surfaces; exterior use on screens and sash. "Dulux" Bulletin Enamels: Our highest quality enamel for sign painting. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior signs. "Dulux" Fume Resistant High Hiding Maintenance White Gloss: Similar to "Dulux" High Hiding Mainte nance White Gloss Enamel but completely lead free for use on walls, ceilings and trim where resistance to discoloration from industrial fumes (hydrogen sulfide, sulfur dioxide, etc.) is required. Resin Base: Soya-alkyd resin. "Dulux" High Hiding Maintenance White Gloss Enamel: Similar to "Dulux" Maintenance White Gloss Enamel, but with increased hiding to provide one coat coverage over most previously finished interior surfaces. New odorless formula. Resin Base: Soya-alkyd resin. Us e: Interior ceilings and walls of industrial plants. Not in tended for use on trim. "Dulux" High Hiding Mildew Resistant Mainte nance White Gloss Enamel: Similar to "Dulux" High Hiding Maintenance White Gloss Enamel, but with un usual resistance to mildew and fungus growths. Resin Base: Soya-alkyd resin. Us e: Interior walls, ceilings of industrial plants, factories, institutions, etc. "Dulux" Maintenance White Gloss Enamel: Has ex cellent whiteness, retention of whiteness, durability and 40 DUP210011396 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes general all-round performance. New odorless formula. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of industrial plants, factories, institutions, etc. "Dulux" Mill White Enamel Eggshell: A high hiding low eggshell finish, for use only on walls and ceilings of industrial plants, factories, etc. Not intended for use on trim. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of industrial plants, factories, institutions, etc. "Dulux" "Ovallte" Enamel Undercoat: Our finest odorless undercoat for use with all types of architectural enamels--gloss, semi-gloss, eggshell and flat. Dries quickly. Sands easily; flows out so smoothly that little sanding is required. "Ovalite" may be intermixed with all types of enamels for varying degrees of gloss. May be tinted with Universal Tinting Colors. Resin Base: Soya-linseed-alkyd resin. Us e: As an undercoat for general interior use. "Dulux" Super White Enamel: Available in three sheens: Gloss, Eggshell and Flat. Our finest interior white enamel made with odorless thinner. May be tinted to pastel shades with Universal Tinting Colors. Tough, durable, long wearing. Will withstand repeated washings. Resin Base: Soya-alkyd resin. Us e: Interior trim, walls, cabinets and other wood, plaster and primed metal surfaces. Mildew Resistant Enamel Undercoat: High resistance to mildew growths. Resin Base: Soya-alkyd resin. Us e: As an undercoat for "Dulux" High Hiding Mildew Resistant Maintenance White Gloss Enamel. Sanitary Gloss Enamel--Oyster White: A high gloss, durable, oyster white enamel. Highly resistant to mildew growth. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of food processing plants under abnormal moisture conditions and where mildew control is important. Sanitary Gloss Enamel White: A high gloss, durable white enamel. For use under abnormal moisture and damp conditions. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings. Porch and Floor Enamel: A quick drying, high gloss finish that will stand hard wear. Especially formulated so as not to show dust and dirt readily. Resin Base: Soyalinseed-alkyd resin. Us e: Exterior: porch floors, wood and concrete steps. Interior: wood floors, concrete floors that are dry and above grade. "Tufcote" Heavy Duty Enamel: Extremely resistant to gasoline, oil or grease; quick drying. One coat is usually sufficient to cover previously painted surfaces. Colors match those of leading implement manufacturers. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior metal and wood: tractors, farm machinery, road equipment, wagons, tools, water pumps, wheelbarrows. FLAT WALL PAINTS AND SEALERS Wall Color Alkyd Flat Enamel: Odorless, alkyd wall enamel, applies easily by brush, roller, or spray. Self sealing quality assures uniform color on new or old surfaces. Dries to a durable, low-sheen finish. White and colors to match "Flow Kote" Rubber Base Wall Paint and "Duco" Satin Sheen Enamel. Us e: Interior walls, ceilings and woodwork. Fire-Retardant Flat Wall Paint: Specially formulated to retard spread of flame. Dries to smooth, fiat surface; washable. Listed by Underwriters' Laboratories. Us e: Interior surfaces including wood, steel, plaster, composition board and other structural materials. Recommended for walls, ceilings, woodwork, beams, pillars, and trim. One-Coat Basement Wall Paint: Ready-to-use acrylic latex paint for interior basement and garage walls. Heavy consistency allows one-coat application over rough, porous surfaces. Resists mildew, alkali, and moisture. Us e: Porous surfaces such as cinder block, concrete block. Also poured concrete, plaster, and dry wall. Primer-Sealer: A combined priming and sealing coat, for use on porous surfaces such as aged plaster, cement, con crete, brick, wallboard, etc. Prevents suction; holds out succeeding coats, creating a uniform surface. May be tinted with Universal Tinting Colors where colored top coats are required. New odorless formula. Resin Base: Soya-linseed-alkyd resin. Us e: Prime coat on interior plaster, masonry, wallboard and similar porous surfaces. Sealer-Coater: A priming first-ooater for two-coat-a-day painting systems. Dries rapidly to a dull luster. Brushes easily, has excellent hiding and sealing properties. No un pleasant odor. Resin Base: Vinyl emulsion. Us e: Prime coat on interior walls and ceilings, either unfinished or previously finished surfaces. "Speed Easy" Flat Wall Paint--White: An interior flat finish of the resin emulsion type. Made in semipaste form, requires reduction with water. Covers most surfaces in one coat, and dries so quickly that two coats may be applied the same day. No objectionable odor. Resin Base: Resin emulsion. Us e: Interior: walls and ceilings; over wallpaper, plaster, brick, acoustical tile, wallboard, ply wood, painted or unpainted surfaces. Stippling Flat: Primarily intended for application by pro fessional painters. For all forms of stippling and mottling. Made in white only, but may be tinted with Universal Tinting Oil Colors. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "Town and Country" Flat White Enamel: New alkyd resin flat made especially for use by the Master Painter where a full bodied, washable interior flat is desired. Made only in white--may be tinted to any light color with Universal Tinting Colors, Processed with new odorless solvents for odor-free applications. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "FLOW KOTE" "Flow Kote" Rubber Base Wall Paint: A washable rubber base emulsion wall and ceiling paint. Easy to apply with brush or roller coater. Dries in 30 minutes to a velvet like sheen. May be recoated in 3 to 4 hours. Shows no brush marks, laps or streaks. No disagreeable odor. Tough and durable. Unusually wear resistant. Us e: Aged bare plaster, wallboard, wallpaper, and previously finished surfaces. Acts as its own primer on most old or new surfaces. HOUSE PAINTS Barn and Roof Paint: A ready mixed, durable, bright red oxide paint for exterior surfaces. Resin Base: Linseed oil. Us e: Exterior use on barns, sheds, fences, etc. 41 DUP210011397 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes "Dulux" Stucco, Shake and Shingle Paint: A durable protective and decorative coating; seals the pores against moisture penetration; preserves the distinctive texture of original surfaces. The white is "self-cleaning" after a period of normal exposure; the colors are chalk resistant. Resin Base: Soya-alkyd resin. Us e: Exterior: brick, cement, concrete, plaster, stucco, cement-asbestos siding. "Dulux" Trim and Shutter Paint: For all outside trim work. Unusually resistant to mildew and fungus growths. Quick drying qualities minimize damage from dust and bugs. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior wood: shutters, lawn furniture, trim, doors. Exterior primed metal: roofs, hand rails, fences, lamps, poles. "40" Outside White: Our highest quality white oil paint for use on structures which are painted all white. Use as white only; will fade if tinted. The combination of titanium pigments with other pigments results in a paint that is "self-cleaning" under normal exposure conditions. Easy brushing. Extra durable. Us e: Exterior wood: body and trim on houses, bams, outbuildings, fences. Exterior metal: when properly primed. House Paint Colors: For long life and long lasting good appearance. Easy to apply. Excellent coverage and hiding. Us e : Exterior: body and trim of wood houses,-barns and outbuildings; also on exterior metal trim which is properly primed. Deep colors intended only for trim purposes-- shutters, blinds, doors, etc. 41 White Lead House Paint: Similar to "40" Outside White except that it is formulated with lead pigment. Easy to apply, excellent hiding. Medium gloss, self cleaning. Not to be tinted. Us e: Properly primed exterior wood pr metal. 42 Chalk-Resistant White House Paint: Designed for (1) tinting with Universal Tinting Colors in producing special shades of house paint; (2) as a white to resist chalk staining of adjacent surfaces. Since it is slow-chalking, it does not have the "self-cleaning" properties of "40" Outside White. USE: Exterior wood body and trim on houses, barns, out-buildings, fences, etc. Also on exterior metal which is properly primed. "Lucite" Acrylic House Paint--50 Outside White; and Colors: Revolutionary new blister-resistant house paint based on acrylic resin emulsion formula. Dries to hard, low-sheen finish. When used with 49 Blister-Re sistant Primer over bare wood, provides excellent resistance to moisture blistering, cracking, and peeling. Has unusual din-ability when applied according to directions. Us e: New or burned off wood surfaces, previously painted firm surfaces; properly prepared masonry and metal surfaces. Blister-Resistant Wood Primer--49 Outside White: New, penetrating wood primer, especially formulated for use with "Lucite" Acrylic House Paints to provide effective blister and crack resistance. Us e: Over new or unpainted wood, or over wood from which the old finish, has been completely removed; or as a prime coat over firmly-adhering old paint. May be tinted. Fume Resistant Outside White: Lead free in pigment and drier; will not discolor in contact with hydrogen sulfide fumes found in industrial areas. Similar to "40" Outside White in other respects. 42 Masonry Block Primer: A very heavy semipaste paint designed for interior and exterior use in filling the voids of masonry blocks. Designed for use as a first coater to be followed by conventional interior or exterior finish coats, or can be used without topcoats to provide a heavy duty finish. Resin Base: Linseed oil. 39 Wood Primer White: Ready mixed primer designed for use on bare wood and badly weathered painted surfaces before applying house paints. Not to be used as finishing coat. Us e: Exterior wood surfaces, body and trim when new or badly weathered. Vinyl Masonry Paint: A vinyl emulsion coating. Its alkali resistance makes it an excellent finish for painted or unpainted stucco, cement, masonry, brick, asbestos shingles and siding, and asphalt composition shingles. No special primers are required. Resin Base: Polyvinyl acetate. MARINE FINISHES "Dulux" Marine Finishes: A special line of finishes for the pleasure-boat field; formulated to withstand water and harbor conditions such as salt spray, sun, and harbor gases. Quick drying; excellent durability; retain their gloss over long periods. The finishes include Yacht White Gloss, Semi-Gloss and Flat; Yacht Black; many attractive colors of Ship and Deck Finishes; Hard Racing Bottom Paints; Engine and Boot-Topping Enamels; Metal Primer; Paste Wood Fillers. The line also includes "Dulux" Clear Finish, "Dulux" Spar Finish, "Dulux" Clear Wood Primer, Ultra V Spar Varnish, and Anti-Fouling Bottom Paints. METAL FINISHES AND PRIMERS A great variety of primers are available for use in home and industry. While it is not practical to list all of them here, zinc chromates, red leads, primer-surfacers, zinc dust, heat resistant, etc., are included. Individually formulated for different metals such as: mill scale bearing steel, mill scale free steel, galvanized metal, copper, aluminum, stain less steel, and others. "Antoxide" Metal Primer, Black: Resin Base: Alkyd resin, linseed oil primer. Us e: Over rusted, hot rolled steel that has been hand cleaned. None of the conventional corrosion inhibiting materials are used. "Duco" Anti-Rust Finishes: Special group of metal primers and top coats to provide highly dependable pro tection from rust and corrosion for all metal surfaces--and the perfect base for whichever DuPont finish coat is to be used, interior or exterior: "Duco" Anti-Rust Primer--No. 70 Red Lead: For damp-proof priming of rusted metal. "Duco" Anti-Rust Primer--No. 545 Zinc Chromate: For clean steel, tin, and aluminum. "Duco" Metal Primer--No. 783 White: For all new galvanized and copper surfaces. "Duco" No. 71 Wrought Iron Black: Dull black finish for all metal surfaces. "Duco" No. 544 Chrome Finish Aluminum: Bright aluminum finish rivals chromium for brilliance. DUP210011398 FINISHES DIVISION: Trade Sales Finishes "Dulux" Galvanized Metal Primer: Designed especially for use as a prime coat for galvanized metal surfaces. Eliminates need for special treatment of galvanized metal. Can be used as a finish coat, if desired. Resin Base: Linseed-alkyd resin. Us e: Exterior and interior galvanized metal and copper surfaces. "Dulux" Metal Protective Paints and Metal Primer: Afford maximum protection to metal surfaces. Resin Base: Soya-linseed-alkyd resin. Us e : Interior: structural steel, tanks, sprders and beams, doors, window frames and sash. Exterior: roofs, corrugated siding, tanks and supports, structural steel, bridges, doors, window frames and sash. "Dulux" Tank Enamel White: An exceedingly white, durable, enamel type finish. Is "self-cleaning" under most conditions. Resin Base: Soya-alkyd resin. USE: As a finish for the outside of exterior metal storage tanks to reduce in ternal temperature. "Dulux" Thermal Gray: Similar to "Dulux" Galvanized Metal Primer but for use on interior and exterior metal surfaces subject to temperatures up to 500F. Resin Base: Linseed-alkyd resin. "Dulux" Zinc Chromate Primer: Highest quality zinc chromate type primer for ferrous metal. Yellowish brown in color. Resin- Base: Soya-linseed-alkyd resin. Us e: For interior and exterior use on properly cleaned metal surfaces. Heat Resistant Stack Paint--Black: A carbon black and graphite paint combined with treated oils which dry to a glossy finish. Resists heat and actually bakes while in sendee. Withstands temperatures up to 450F. Us e: Clean metal surfaces subject to heat contact. Ho. 785 Metal Primer: A good quality general purpose red lead/iron oxide type dark brown metal primer. USE: Exterior and interior metal surfaces. Sub-Marine Metal Primer: A zinc chromate-type primer for use on properly prepared ferrous metal subject to under water exposure or conditions of extreme moisture. Yellow ish brown in color. Resin Base: Chinawood oil, phenolic resin. Us e: Inside or outside on properly cleaned metal surfaces subject to continual moisture or dampness. OILS AND THINNERS "Dulux" 200 Thinner: A special petroleum distillate for use with "Duco" Enamels and Clear Finishes, "Dulux" Paints and Enamels and with other products as directed on labels. "Dulux" 711 Odorless Thinner: A new odorless thinner to be used only in those products where its use is specifically recommended on labels. "Dulux" 710 Reinforcing Oil: A synthetic dear reducing oil. Resin Base: Soya-alkyd resin. Us e: In reducing "Dulux" Exterior Finishes and Cement and Stucco Paint in accordance with directions. . STAINS Satin Sheen Oil Stain: A pigmented, fiat drying stain in a linseed oil, rosin vehicle. Available in all popular shades. Us e: For staining all kinds of exterior and interior wood surfaces. Shingle Stain: A high grade, pigmented stain, using processed vegetable and creosote oils. Penetrates into the wood. Us e : Exterior shingle roofs and siding. Varnish Stain: A high gloss, quick drying combination Stain and varnish. Makes possible staining and varnishing in one operation. Highly resistant to marring. "Tufcote" Graining Ground is used when changing from a. dark to a light surface. Resin Base: Phenolic resin, vegetable oil. Us e : Interior: floors, woodwork and furniture. PROFESSIONAL PAINTER LINE This line of paints is especially designed for use by pro fessional painters. All products are supplied in white, except for Professional Latex Wall Paint which features six colors in addition to white. The white goods may be tinted with DuPont Universal Tinting Colors. Each finish in the Professional Painter Line offers fast and easy application, good hiding and excellent appearance. VARNISHES Clear Wood Sealer: Versatile, heavy-duty sealer for use under all-varnishes for added beauty and durability. Dries fast, allowing sealer and topcoat varnish to be applied same day. Improves adhesion of varnishes over oil stains. Us e: Any interior wood surface, including floors, paneling, trim, and furniture. Not for use under Penetrating Wood Finish. "Dulux" Exterior Spar Varnish: Our highest quality exterior varnish; pale, high build, tough and elastic. Resin Base: Soya-alkyd resin. Us e: Doors, furniture and mis cellaneous small surfaces not fully exposed to the weather. Not recommended for siding and trim of houses. "Dulux" Interior Varnish: Our highest quality high gloss interior varnish. Pale in color, easy brushing, hard drying; excellent resistance to alkali, hot and cold water, and alcohol. Quick drying. Resin Base: Linseed, ester gum, phenolic resin. Us e: Floors, trim, bars and furniture. "Dulux" Satin Sheen Varnish: Highest quality rubbedeffect varnish. Produces a uniform low sheen of satin smoothness. Easy to apply. Free flowing. Unexcelled for mar and water resistance. Resin Base: Soya-alkyd resin. Us e: Interior trim, woodwork, wood paneling and furni ture. Industrial Floor Finish: A high quality, high gloss clear topcoat for use over a previous application of Penetrating Wood Finish. The combination of these two products offers durability, long service, quickness and ease of cleaning. Resin Base: Linseed rosin modified phenolic resin. Us e : Gymnasium and industrial interior flooring where an extra durable clear finish is required. Penetrating Wood Finish: A clear penetrating finish of great durability. Dries with a dull luster. Resin Base: Chinawood oil, phenolic resin. Us e: Interior wood floors, wood paneling, wood trim and furniture. Super Clear Varnish: A pale, high gloss varnish. Resists discoloration from contact with hot and cold water. Resin Base: Phenolic resin, rosin, tung and soya oils. Us e: In terior: wood floors, woodwork and trim. 43 DUP210011399 Textiie Floor Finish: A single package, oil-free urethane high-gloss clear for wood and concrete floors. Extremely wear-resistant. Us e: Commercial application for floors subject to heavy traffic in textile mills, paper mills, industrial plants, or wherever a very tough and elastic clear coating is required. MISCELLANEOUS Paint & Varnish Remover: Non-flammable, water-rinse remover compounded to simplify the job of completely removing all types of finishes from wood, metal, plaster, masonry (and hardened paint brushes) without harming the surface. Heavy-bodied formula works equally well on vertical as well as horizontal surfaces. Paste Wood Filler: A natural color semipaste wood filler of excellent quality. Requires reduction with turpentine or mineral spirits for use. Us e: Filling the grain of interior or exterior open-grained wood surfaces; also recommended for marine work. Soil Retardant Finish: A transparent fluid containing colloidal silica. Possesses unique property of making a smooth painted surface so slick that dirt collection is minimized. USE: Commercial application on painted tanks, signs, buildings, service stations. Also interior surfaces. Traffic Paint: Quick drying finishes for marking traffic lanes. Us e: Exterior street surfaces, interior floors of in dustrial plants for marking aisle boundaries for general traffic control. Universal Tinting Colors: For use with Custom Color white bases and ready-mixed shelf-goods colors and whites, including oil-base and emulsion finishes. Carefully controlled for tinting strength and color. i DUP210011400 s FILM DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Packaging Sales Atlanta 9, Georgia Boston (Waltham 54), Massachusetts Chicago 3, Illinois Kansas City 5, Missouri New York 1, New York Philadelphia 3, Pennsylvania San Francisco 4, California 1430 West Peachtree Street, N. W. 45 Fourth Avenue 7 South Dearborn Street 1004 Baltimore Avenue Empire State Building, 350 Fifth Avenue 1616 Walnut Street 111 Sutter Street, Room 1018 Industrial Sales Chestnut Hill 67, Massachusetts Chicago 3, Illinois Cleveland 16, Ohio Los Angeles 58, California (with Converter Sales) New York 1, New York 824 Boyleston Street 7 South Dearborn Street 20575 Center Ridge Road 4455 Fruitland Avenue Empire State Building, 350 Fifth Avenue EXPORT SALES OFFICE: Nemours Building Wilmington 98, Delaware PLANTS: Buffalo, New York Cirdeville, Ohio WAREHOUSES: Dallas, Texas Clinton, Iowa Florence, South Carolina Tecumseh, Kansas Los Angeles, California Oakland, California TELEPHONE PRospect 4-1000 TRinity 2-5828 TWinbrook 9-8300 ANdover 3-7000 GRand 1-6629 LOngacre 3-6400 Kingsley 5-4050 EXbrook 2-0808 TWinbrook 9-8300 ANdover 3-7000 EDison 3-1424 LUdlow 3-3171 LOngacre 3-6400 Old Hickory, Tennessee Richmond, Virginia Seattle, Washington PRODUCTS Acetate Film: A highly transparent film with good dimensional stability, produced from cellulose acetate. It is resistant to grease and oil. KINDS: Rigid (CA-143) and flexible (CA-148). THICKNESSES: From 0.00088 in. to 0.0020 in., with yields of 25,000 to 11,000 sq. in. per lb. Us e: Principally for laminations, foliation, document pres ervation, pressure sensitive tape; magnetic sound record ing tape; window cartons and envelopes; packaging of items, such as textiles, paper specialties, etc. efficient for high speed machine wrapping. Newest addi tion to the line are the polymer coated types ("K" cello phanes). They provide superior appearance, moisture protection and durability, and are highly resistant to oil and grease. They are designed for use on a wide variety of products, including baked goods, cookies, potato chips, and candy. One type of "K" cellophane is non-fogging and opens up unusual packaging possibilities for frozen baked goods and other frozen foods. t h ic k n es s es : From 0.0009 in. to 0.0018 in., with yields of 21,500 to 10,300 sq. in. per lb. AVAILABLE f o r ms : Supplied by DuPont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from 1}4 in. to 48 in. Cut-tosize sheets are prepared according to specifications in dimensions up to 40 x 48 in. Supplied in forms other than unprinted rolls and cut-to-size sheets by converters and fabricators, names of whom will be supplied upon request. Cellophane: k in d s : Basic film types include plain, semi-moistureproof, and moistureproof in a number of grades to meet the pack aging requirements for many products. All types are trans parent, strong, flexible, resistant to grease and oil and are Us e: Cellophane is used as a wrapper or bag to provide protective packages with maximum visibility of product and good merchandising qualities. Other uses include fabri cated articles and industrial applications. Some of the major uses are: . Plain (non-moistureproof)--Paper, textiles, pressure sensitive tape and other fabricated articles. Moistureproof (non-heat sealing)--Cigars, cigarettes, candy, cheese. Moistureproof Heat Sealing--Bakery products, fresh meats, nuts, potato chips, dried fruit, frozen food, dairy products, cereals, candy, drugs, medical sup plies, hardware, textiles. 45 DUP210011401 FILM DEPARTMENT Semimoistureproof--Fresh fruits and vegetables, luncheon meats, milk bottle hoods. a v ail a bl e f o r ms : Supplied by DuPont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from to approximately 46 in. Cut-to-size sheets are prepared according to specifications in dimensions up to approximately 40 x 50 in. Supplied in printed bags, rolls, sheets and other forms by authorized converters and fabricators, names of whom will be supplied upon request. "Mylar'' Polyester Film: An exceptionally strong, dura ble film with an unusual balance of properties suited to many electrical, industrial and packaging uses. It has a high level of physical properties, is relatively moisture insensitive, is water vapor resistant, and is unaffected by and does not transmit oils, greases and volatile aromatics. It has excellent electrical properties and is compatible with most varnishes and enamels giving it broad utility in electrical applications. It retains these properties and is useful from -- 80F. to over 300F., with the exact tempera ture conditions depending upon the application. k in d s : Seven available types include general purpose film suitable for electrical and other industrial applications; a special electrical grade film Jn thin gauges for capacitor applications; a transparent film in heavy gauges; a tensilized film for magnetic tape applications; a weatherable film for outdoor applications; heat sealing and heat shrinkable films for packaging. THICKNESSES: From 0.00025 in. to .010 in., with yields from 80,000 to 2,000 sq. in. per lb. Us es : "Mylar" is suited to a wide range of applications: Polyethylene Film: A very lightweight, tough, flexible material that provides excellent resistance to the trans mission of moisture vapor. The film remains pliable to --70F., resists cracking, and is chemically inert and impervious to acids, alkali, most solvents, mildew and fungus. It is odorless and nontoxic. t h ic k n e s s : Films in thicknesses from 0.001 in. to 0.010 in. with yield from 30,000 sq. in./lb. to 3,000 sq. in./lb. Greater thicknesses available on special quotation basis. AVAILABLE FORMS: Construction and Agriculture: One and one-half (1J4) to 10 mil flat sheeting in natural and black. Widths from 12 in. to 40 ft. Also SR-300 weatherable polyethylene lasting 3 to 4 times longer than standard natural polyethylene. Industrial: Flat sheeting in natural and black available in thick nesses from 1 to 10 mil. Widths from 1]4 in. to 56 in. White opaque films in thicknesses from 1 to 3 mil. Widths 134 in. to 56 in. Packaging: High clarity films in thicknesses of 1, 1 ]4< 11/2 and 2 mil. Widths available in fiat sheeting up to 48 in. Us es : In construction and agriculture: As a moisture barrier, pond liner, irrigation, temporary silo, glazing, flashing and mulching. Industrial: Laminations, fabric replacement and pressure sensitive tapes. Packaging: Consumer goods in bags and overwrap packages. Electrical: ' Dielectric in capacitors; slot liners, wedges and phase in sulation for motors; tape insulation for motor and gen erator field coils; a barrier and insulating tape in wire and cable constructions; insulation between turns in transformer coils; backing for mica and other materials for insulation purposes. "Teflon" FEP-Fluorocarbon Film: An impermeable, heat sealable film produced by melt extrusion of "Teflon" FEP-Fluorocarbon resin. The film is unaffected by all solvents and practically all chemicals; has outstanding electrical properties; is capable of continuous service at 400F. ; can be heat formed to fit complex shapes and can be heat bonded under pressure to many metals; has good Other Industrial Uses: ' low temperature toughness, excellent antistick properties; can be treated to make it receptive to conventional ad Base for magnetic recording tape and pressure sensitive hesives. tapes; base for metallic yams; base for metalizing, deco rative laminations; surfacing material for acoustical tile; separator sheet for reinforced plastics; a base for car tography and drafting films; roll leaf base; decals; water Uses for the film are in printed circuitry and flexible cable, capacitors, wire and cable, gaskets, seals, and re lease applications. vapor barriers; apparel and garment stays; and various stationery uses such as book covers, page protectors, dis play folders, index card's and a base for typewriter rib bons. Weatherable form provides a low cost outdoor "Vexar" Plastic Netting: Integrally extruded plastic mesh material available in a wide variety offorms and colors. construction and glazing material. "Vexar" Plastic Netting is produced from both low and Packaging: high density polyethylene and polypropylene, and exhibits the outstanding chemical inertness and resistance to mois General packaging and wrapping, bundling, window ture, rot, and mildew which are characteristic of these boxes, bags, laminations, base for special coated film, resins. Mesh size and filament diameter may be varied over heat shrinkable skin-tight packages for smoked meats, a broad range to give products suited to a wide variety of poultry and cheese. applications. It is available in commercial quantities as AVAILABLE FORMS: Supplied in rolls and cut-to-size sheeting, lay-flat tubing, rigid piping, and fabricated bags. i sheets. Rolls are slit in 1/16-in. multiples, standard Uses for "Vexar" include packaging, particularly produce widths from J4 in. to approximately 55/4 in. Cut-to- for which product ventilation is desirable, shelf lining, size sheets are prepared according to specifications in decorative covers, filtration, display materials, fabric re dimensions up to approximately 43 x 43 in. placement, and many others. 46 DUP210011402 FILM DEPARTMENT "CEL-O-SEAL" BANDS DIVISION GENERAL OFFICES: Buffalo 7, New York River Road, Station B EXPORT SALES OFFICES: Same as above PLANT: Buffalo, New York . TELEPHONE TR-6-4420 PRODUCTS "Cel-O-Seal" Cellulose Bands: Are regenerated cellu lose; odorless, non-combustible, harmless; resistant to oils, fats, dirt and dilute adds. s t y l es a n d s iz e s : Furnished in a wide range of sizes as: transparent, opaque, fluorescent, metallic, metallic pas tels and "Wind-O-Band" seals. May be obtained in black, white or a wide variety of standard colors. Can be attractively printed in a wide range of colors to personal ize and complement individual designs. Widely used for sealing closures on foods, drugs, wines, beverages, aero sols, chemicals and miscellaneous products. Bands may be hand or machine applied. Regularly shipped in a solution, ready to use directly from containers. "w in d -o -b a n d " c e l l u l o s e SEALS: Made with opaque front and back and transparent sides for the distilled spirits industry to provide decorative and positive package sealing and approved Federal tax stamp pro tection. They are sold only to licensed bottlers of dis tilled spirits and other manufacturers who place U. S. Tax Stamps on their products. f 5rf DUP210011403 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES--INDUSTRIAL CHEMICALS:* Atlanta 8, Georgia Chicago 32, Illinois Cincinnati 2, Ohio Cleveland 14, Ohio Detroit 35, Michigan Houston 27, Texas Minneapolis 2, Minnesota New Haven 13, Connecticut New York 1, New York Pittsburgh 19, Pennsylvania St. Louis 5, Missouri Waltham 54, Massachusetts Wynnewood, Pennsylvania 739 West Peachtree Street 4251 South Crawford Avenue 2308 Carew Tower 1321 National City Bank Building 13000 West Seven Mile Road 4215 Richmond Avenue 1207 Foshay Tower 46 River Street 350 Fifth Avenue 1715 Grant Building 10 South Brentwood Boulevard 45 Fourth Avenue 308 East Lancaster Avenue TRinity 6-1586 CLiffside 4-7676 CHerry 1-4570 MAin 1-6460 UNiversity 4-1963 MOhawk 6-0251 FEderal 5-4181 LOcust 2-5145 LOngacre 3-6456 GRant 1-5427 PArkview 6-1400 TWinbrook 9-8300 TRinity 8-2700 DISTRICT OFFICES--BIOCHEMICALS: Atlanta 8, Georgia Houston 27, Texas Minneapolis 2, Minnesota Palo Alto, California Western Springs, Illinois Wynnewood, Pennsylvania 739 West Peachtree Street 4215 Richmond Avenue 1207 Foshay Tower 701 Welch Read 40-47th Street 308 East Lancaster Avenue TRinity 6-1586 MOhawk 6-0251 FEderal 5-4181 DAveriport 6-6044 CHestnut 6-5902 TRinity 8-2700 PLANTS: Belle, West Virginia Bellwood, Virginia Cleveland, Ohio Cornwells Heights, Pennsylvania East Chicago, Indiana Ecorse, Michigan Fortville, Indiana Grasselli, New Jersey Miami Fort, Ohio Van Waters and Rogers, Inc., are exclusive Western agents with offices in: Albuquerque, Boise, Denver, El Paso, Los Angeles, Phoenix, Portland, Salt Lake City, San Diego, San Francisco, Seattle, Spokane and West Sacramento. See local phone books for addresses. Philadelphia, Pennsylvania Strang, Texas Toledo, Ohio Wurtland, Kentucky PRODUCTS ^In d ic a t e s Re s al e Pr o d u c t s INDUSTRIAL CHEMICALS Acetic Acid--Glacial--Reagent (Ethanolc Acid, Vin egar Acid)--CHgCOOH: Clear colorless liquid with pun gent odor; crystallizes to a solid at 60F. (15.6C.); soluble in water, alcohol and ether; Sp. Gr. 1.048; B. P. 117.8C. Us e: As a reagent in chemical analysis or where an espe cially high purity acid is required. Co n t a in e r s : 1- and 5-pt., 6and 13-gal. carboys. Adhesives No. 60, No. 77, No. 78 and No. 78X: Vinyl resin base white powders; soluble in water at elevated temperatures and with proper agitation. Us e: As an ad hesive for laminated paperboard. The bond made between flat surfaces of paperboard withstands long exposure to water without ply separation. CONTAINERS: 50-Ib. paper bags. Adipic Acid--(CHs)<(COOH)2: White crystalline solid; M. P. 152C. ; soluble in alcohol; slightly soluble in water. Us e: In manufacture of plasticizers and polyester resins; in organic synthesis; as an edible food add. CONTAINERS: 50-lb. paper bags. '''Alum, Ammonium: (See Aluminum Ammonium Sul fate, Page 49.) Alum--Iron Free: (See Aluminum Sulfate--Iron Free, Page 49). Alum, Potash: (See Aluminum Potassium Sulfate, Page 49). 48 ft DUP210011404 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS "Aluminum Ammonium Sulfate--N. F. and Tech nical (Ammonium Alum, Crystal Alum) -- (NHOiSO.-AI^SOOj 24HiO: Clear colorless crystals, lump, granules or powder; soluble in water and glycerin; in soluble in alcohol. Us e: In leather and fur tanning; baking powder; printing and dyeing fabrics; in pharmaceuticals and styptic products; for brining of pickles. CONTAINERS: 100-lb. paper bags, 100-lb., 325-lb. and 400-Ib. fiber drums. Aluminum Chloride--Technical--AICI3-GHsO--Crys tal : Pale yellowish, granular, slightly odorous, deliquescent crystals; contains 96.5% A1C13-6H*0; soluble in water, alcohol and ether. Solution: 50% A1C1'6HS0 in water. Clear, water white, corrosive liquid; miscible with water, alcohol and ether; gravity 32 Be. Us e: In photographic fixing baths; in manufacture of dry colors, aluminum hydroxide gel, and roofing granules. Co n t a in e r s : Crys tals--300-lb. polyethylene-lined fiber drums. Solution-- 325-lb. polyethylene drum (fiber overpack), tank cars and tank trucks. Aluminum Complex 101--Technical: A Werner type aluminum complex in isopropanol. Us e: As a water re pellent and sizing treatment for paper, textiles and other materials; for treatment of leather, masonry and other negatively charged surfaces; and for insolubilizing various water soluble or swellable coatings. Co n t ain er s : 6^-gal. carboys. "Aluminum Potassium Sulfate--N. F. and Technical (Potassium Alum, Potash Alum)--KaS04-Ala(S04)s' 24HaO: Clear, colorless crystals, lump, granules or powder; soluble in water; insoluble in alcohol; M. P. 92C. Us e: In manufacture of photographic film hardeners, pharmaceuti cals, as a tanning agent. Co n t a in e r s : 100-lb. paper bags, 100-lb., 350-lb. and 400-lb. fiber drums. Aluminum Sulfate--Iron Free--U.S.P., Food Proc essing and Technical--AI2(S0,)3'18H20: White lumps or granules; soluble in water; insoluble in alcohol. Us e: In manufacture of aluminum soaps, printing inks and lake colors; in tanning of white leather; in sizing and coating of paper; baking powder; in pharmaceuticals and styptic products; for brining of pickles. Co n t a in e r s : 100-lb. bags. Amine 248: Amber colored, non-volatile amine slurry with bis-(hexamethylene) triamine and its homologues as principal components. Density is 0.9930 at 25C. 60% distills between 125-245C. at 35 mm. pressure. Us e: Polyamide resins, curing agent for epoxy resins, water treatment and corrosion inhibitor formulations and ab sorbing medium for acid gases. Co n t a in e r s : 55-gal. drums and tank cars. Ammonia--Aqua--NH,OH: (See Ammoniacal Liquor, below.) ' Ammoniacal Liquor (Ammonium Hydroxide) -- NH<OH: Water-white liquid: 26 Be. at 60F. containing 29.4% NH3 by weight. Sp. Gr. 0.8974 at 60F. (15.6C.). Us e : Manufacture of ammonium salts and other chemicals; in household ammonia and other cleaning agents; as a neutralizing agent; for pH control; in water purification; ingredient in ink and photographic developers; hydrolysis of gelatin and glue. Co n t a in er s : 7,000-, 8,000- and 10,000-gal. tank cars. `Ammonium Alum: (See Aluminum Ammonium Sul fate, thi3 page.) Ammonium Chloride--Technical (Chloride of Am monia, Sal Ammoniac, Muriate of Ammonia)-- NHiCI: Granules, crystals and rods; soluble in water and glycerin; slightly soluble in alcohol; sublimes when' strongly heated; Sp. Gr. approximately 1.53. Us e: As a flux for hot dip galvanizing sheet steel and other steel products; as a flux in the electrolytic refining of zinc. Co n t a in e r s : 100-lb. paper bags, 300-lb. fiber drums. 'Ammonium Chloride--White Fines Technical (Chloride of Ammonia, Sai Ammoniac, Muriate of Ammonia)--NH<CI: White, crystalline powder; soluble in water and glycerol; Sp. Gr. 1.52; sublimes when strongly heated. Us e: As an ingredient in dry batteries and cells; in galvanizing fluxes; in the manufacture of leather; in manu facture of roofing granules. Co n t a in e r s : 100-lb. bags, 275-lb. bbl. Ammonium Hydroxide--Reagent (Aqua Ammonia, Ammonium Hydrate)--NH4OH; Clear, colorless solu tion with pungent odor; Sp. Gr. approximately 0.9; F. P. below --40C.; 27-30% NHS. Us e: As a reagent in chemical analysis where especially high purity is required. CON TAINERS: 1- and 5-pt. bottles, 6J4- and 13-gal. carboys. Ammonium Hydroxide: (See Ammoniacal Liquor and Aqua Ammonia 26, this page.) Ammonium Sulfamate--NH4S03NHa: White, crystal line, hygroscopic solid; extremely soluble in water; moder ately soluble in glycerin, glycol and formamide. Us e: For retarding flame in textiles and paper products (See "CM" Flame Retardant, Page 43 and "X-12" Flame Retardant, Page 49); in electroplating solutions. Co n t a in e r s : 50-lb. fiber drums, 100-lb. paper bags. Ammonium Sulfate--Technical--(NH4)aS04: White crystalline material; very soluble in water; insoluble in alcohol; decomposes at 100C. Us e: As a nutrient in pro duction of yeast, as a flame retardant for wood, textiles, etc.; for ammonia-chlorine disinfection of water; as an ingredient in cleaning compounds and electroplating solu tions; in dyeing textiles and manufacture of ammonium salts; not for fertilizer use. Co n t ain er s : 100-lb. paper bags, bulk. Anisole--Technical (Phenyl Methyl Ether) -- C8H5OCH3:A clear mobile liquid with a light ethereal odor, insoluble in water, soluble in alcohol and ether. B. P. 153.8C.; F. P. --37.3C. Us e: As a chemical intermediate in alkylation, acylation, halogenation and nitration re actions; as a solvent reaction medium; as a heat transfer medium. Anisole has high heat stability, high flash point, low vapor pressure and low order of toxicity. Co n t a in e r s : 5- and 55-gal. drums, tank cars, and tank trucks. Aqua Ammonia 26 U. S. P. (Ammonium Hydroxide, Ammonia Hydrate)--NH<OH: Clear, colorless solution, characterized by sharp, penetrating ammonia odor. Sp. Gr. approximately 0.9; F. P. below --40C.; 26 Be., 29.4% NH3. Us e: As an emulsion stabilizer; in the manufacture of ammonium salts and cuprammonium rayon; in house- DUP210011405 hold ammonia water; in textile scouring, dyeing and mildew-proofing; for glass cleaning in manufacture of mirrors; in saponifying fats and oils; for yeast foods; in manufacture of ink, varnishes, soap, resins, rubber *Copper Sulfate--Technical (Cupric Sulfate, Blue Vitriol, Bluestone)--CuS04'5H,0: Blue, crystalline, granular or powdered material; soluble in water and alcohol; effloresces in dry air; Sp. Gr. 2.286. Us e: As a and leather; in electroplating and photoengraving.-Co n germicide; in manufacture of stock powders; in the drawing t a in e r s : 96-lb. carboys, 385-lb. steel drums, tank trucks. of wire; in compositions for wood preserving. Co n t ain er s : tl 100-lb. bags. Battery Acid (Electrolyte Acid, Storage Battery Acid, Sulfuric Acid)--HiSO,: Clear, colorless, corrosive liquid available generally at Sp. Gr. 1.835. Inquiries for special "Copperas: (See Ferrous Sulfate, Page 51.) strengths. are invited. Us e: As electrolyte in lead type storage batteries. Co n t ain e r s : 130- to 200-lb. glass car boys, tank cars, and tank trucks. Copperized CZC Chromated Zinc Chloride--'Tech nical--CuCIs, ZnCls and NasCrjO,: Granular material n-Butanol Formaldehyde 51-40: A clear, colorless re action product containing 40% formaldehyde, 51.5% n-butyl alcohol, and 8.5% water. Density 8.1 Ib./gal.; viscosity 5.1 cp. at 25C. Us e : In manufacture of resins for textile, paper, and paint applications; chemical synthesis. with slight brownish color or 50%water solution. A compan ion product to CZC chromated zinc chloride for wood preser vation. Possesses increased and exceptional preservation value and termite repellency and the treated wood is clean, odorless, paintable and flame retardant. Co n t a in e r s : Dry --50- and 575-lb. drums. Solution--Tank cars. Co n t a in er s : 55-gal. drums; 4,000-gal. tank trucks (within a 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. Cyclohexanol: (See "Hexalin" Cyclohexanol, Page 52.) Calcium Propionate: (See "Mycoban" Calcium Fro- Cyclohexanone: (See "Hytrol" O Cyclohexanone, Page pionate, Page 54.) S3.) "Caustic Soda: (SeeSodium Hydroxide, Page 56.) Cetyl Alcohol: (See "Lorol" 24 Cetyl Alcohol, Page 53.) Chlorosulfonic Acid--Technical--CISOjH: Clear, col orless to light straw colored, oily, fuming, corrosive liquid with pungent odor; decomposed by water or alcohol; Sp. Gr. approximately 1.75; F. P. below --37C.; B. P. 154C.; - minimum 98.5% CISOjH. Us e: In sulfation and sulfonation of organic compounds for manufacture of sulfonated oils, intermediates for dyes and pharmaceuticals, pesticides, detergents and ion exchange resins; for production of anhydrous HC1 and smoke-producing chemicals. Co n t a in e r s : 700-lb. steel or stainless steel drums, tank cars, and tank trucks. Chrome Complexes: A group of Werner type chromium complexes of carboxy acids in isopropanol. Now available are the complexes of the following adds: aminoacetic, p-aminobenzoic, cyanoacetic, gluconic, 2,4-hexadienoic, hydroxyacetic, mercaptoacetic, p-nitrobenzoic, betaresorcylic, tannic, and trichloroacetic. Others can be made available. (See also "Quilon" chrome complex and "Volan" bonding agent.) Us es : For changing the surface charac teristics of materials such as glass, natural or synthetic fibers, metal oxides, wood, paper, etc., to serve as anchoring agents for resins and other polymers, as absorbers of ultraviolet light, as anti-static agents, and many other possibilities. Co n t ain e r s : 6J4 gal- carboys. CZC Chromated Zinc Chloride--Technical--ZnCIs and NagCrsO;: Granular material with slight brownish color or 50% water solution. Solution: Gravity about 51.7B6.; F. P. --37.2C. Us e: For preserving wood against decay, termite attack and for application as a flame re tardant. Treated lumber is dean, odorless, paintable, safe to handle and flame retardant. Co n t ain e r s : Dry--50and 625-lb. drums. Solution--Tank cars. Decanol: (See "Lorol'* 22 n-Decanol, Page 53.) 1,4 Dichiorobutene-2--CICHsCH=CHCHaCl: Avail able as trans isomer in 95-98% purity. Vesicant colorless liquid of density 1.18-25/4C.; atmospheric boiling point 158C.; soluble in hydrocarbons. Us e: Intermediate in manufacture of unsaturated difunctional compounds, electroplating chemicals, biologically active compounds, and textile treating compounds. Co n t a in e r s : 55-gal. drums and tank cars. Diethylamine--Technical--(CH3CHa)sNH: Colorless liquid; B. P. 55.4C.; Sp. Gr. 0.706; miscible with water and most organic solvents. Us e: In the synthesis of rubber chemicals, pharmaceuticals, pesticides, fungicides, herbi cides, corrosion inhibitors, and textile softeners, wetting agents, and emulsifiers. Co n t a in e r s : 5- and 55-gal. drums: and tank cars. "CM" Flame Retardant: Fine, white, granular compo sition based on ammonium sulfamate and modified to pre vent afterglow and to improve penetration. Soluble in water; insoluble in the common dry cleaning solvents. (See Ammonium Sulfamate, Page 49 and "X-12" Flame Retar dant, Page 58.) Us e : In flameretardant treatment of fabrics, paper, paper products and other cellulosic materials. Co n t a in e r s : 50-lb. fiber drums, 100-Ib. paper bags. 50 Diglycolic Acid--0(CHsCOOH)s: White crystalline solid; M. P. (pure) 148C.; soluble in water and alcohol; pH of 10% aqueous solution 1.4. Forms a nonhygroscopic mono hydrate at relative humidities above 72% at 25C. Us e: In manufacture of resins and plasticizers; in organic synthesis; sequestering agent; emulsion breaker in petro leum, and coagulant in rubber and plastics. Co n t a in e r s : 50-lb. paper bags. DUP210011406 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Dimethylamlne--DMA--Anhydrous and Aqueous `Ferrous Sulfate--Technical (Copperas, Green Vit Solutions--TechnicaI--(CH3)3NH: Anhydrous--color riol, Iron Sulfate)--FeS04*7H30s Bluish-green crystals, less gas, clear and water white when liquefied. Us e: In granular or powdered material; soluble in water; insoluble termediate in the manufacture of rubber accelerators and quaternary compounds; in manufacture of pharmaceutical in alcohol; Sp. Gr. 1.898; M. P. 64C. Us e: In manufacture ofiron salts, pigments, dry colors, indigo dyes; as a mordant intermediates, fungicides and herbicides; as a dehairing agent in leather processing; in manufacture of solvents and in dyeing and printing textiles; for purification processes in gas, sewage and water plants; in manufacture of brick. aSt rocket fuels. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solution--55-gal. drums, Co n t a in e r s : 100- and 200-lb. bags, 300- to 400-lb. bbl., bulk. tank cars and tank trucks. Flame Retardants: (See Ammonium Sulfamate, Page 49, Dimethyl Sulfate(Methyl Sulfate)--(CHs)!iS04: Water- "CM" Flame Retardant, page 50, and "X-12" Flame white liquid; F. P. --31.8C.; B. P. 188.8C.; Sp. Gr. Retardant, Page 58.) ta? # (15.6/15.6C.) 1.332. Us e: As a methylating agent in making intermediates, dyes and synthetic drugs. Co n t a in e r s : 10- and 55-gal. drums, 8,000-gal. tank cars. Flux, Galvanizing: (See Zinc Ammonium Chloride, Page 58 and Ammonium Chloride, Page 49.) DMAC -- Dimethylacetamide --Technical -- CH3CON(CH3)3: Colorless liquid; B. P. 165.5C.; F. P. --20C.; Sp. Gr. 0.945; miscible with water and common Flux, Soldering--"Eureka" Soldering Flux Crystal --Zinc Chloride 4-Ammonium Chloride: White, crys organic solvents. Us e: As a solvent for polyacrylonitrile, talline powder; soluble in water. Us e: As a flux in soft vinyl resins, cellulose derivatives, styrenes, linear poly soldering operations and preparation of liquid soldering f esters, and paint removers. As a catalyst and solvent in fluxes. Co n t ain er s : 50- and 600-lb. steel drums. elimination, halogenation, cyclization, alkylation, inter esterification, phthaloylation reactions and others. CON TAINERS: 5- and 55-gal. drums, and tank cars. Flux, Soldering--"Kleanrol" Soldering Flux Crystal --Zinc Chloride-f-Ammonium Chloride: White, crys talline powder. Us e: As a solder blanket flux in automatic DMF-- Dimethyl Form amide--T echnical -- soldering of side-seams in manufacture of tinned containers. HCON(CH3)3: Colorless liquid; B. P. 153C.; F. P. Co n t a in e r s : 50- and 500-lb. drums. --61C.; Sp. Gr. 0.953; miscible with water and common organic solvents. Us e: As a solvent for vinyl resins in lacquers, films and printing inks, for pigments, dyes and inorganic salts. As a catalyst and solvent in many types of organic reactions such as halogenation, alkylation, elimi nation, cyclization and many others. As a reaction medium in dyes; as a selective refining solvent for acetylene, add gases and petroleum constituents. Co n t a in e r s : 5- and 55-gal. drums, tank trucks, tank cars. . Fluxes, Soldering Liquid--Triple "Eureka" and "Eureka" Soldering Flux: Clear, colorless water solu tions based on zinc chloride and containing other ingredi ents. Various gravities and compositions. Us e: General soft soldering and solder and lead-coating fluxes for use in the automotive, can, refrigeration, wire and other in dustries. Co n t a in e r s : 145-lb. carboys, 605-lb. drums. `Disodium Phosphate: (See Sodium Phosphate--Di, Page 56.) "Duclean" No. 1 Inhibited Sulfuric Acid--Technical (60 Be. Sulfuric Acid Containing an Acid Pickling Inhibitor): Clear, reddish-brown liquid; miscible with water; Sp. Gr. 1.706; F. P. below--10.8C. Us e: In pickling iron and steel; for descaling and cleaning of steel and other metals under conditions where it is desirable to inhibit the acid corrosion of steel and ferrous alloys. CONTAINERS: 185-lb. glass carboys, 700-lb. drums, tank cars, and tank trucks. "Duclean" No. 2 Hydrochloric Acid Solution In hibited--Technical: Clear, water white liquid with pungent odor; miscible with water; Sp. Gr. 1.142; F. P. below --40C. Us e: In pickling iron and steel; for removing deposits, including hard water scale, hydrated iron and rust from evaporators, condensers, water distributing line3, water well screens, etc., where it is important to inhibit acid corrosion of steel and other ferrous metals. CONTAIN ERS: 125-lb. glass carboys, tank cars, and tank trucks. Engraver's Acid: (See Nitric Arid--Technical and En graver's Quality, Page 54.) Fatty Alcohols: (See "Lorol" Fatty Alcohols, Page 53.) Fluxes, Tinning--Standard and "High Speed" Tin ning Flux 50: Clear, colorless water solution of zinc chloride and ammonium chloride; Sp. Gr. 1.526; F. P. be low --50F. Us e: As fluxing solutions in manufacture of tin plate, teme plate, tin strips, dairy equipment, refriger ator trays, automobile radiators, wire goods, etc. CON TAINERS: 165-lb. carboys, 670-lb. drums. Formaldehyde Solution (Formalin)--CH30: A dear, colorless, aqueous solution. USE: In manufacture of phenolic and urea resins: in manufacture of casein plastics, dyes, chemicals for textile industry, and embalming fluids; in paper, leather and cork products; as a disinfectant, deodorant, preservative; for treatment of seeds and soil; for chemical synthesis. Low Me t h a n o l Gr a d e s : 37% formaldehyde by weight, max. 1% methanol by weight; 45% and 50% formalde hyde by weight, max. 2% methanol by weight. CON TAINERS: Tank trucks 26,000- to 38,000-lb. (within 200mile radius of Perth Amboy, New Jersey and Toledo, Ohio); 72,000-lb. tank cars. U.S.P. Gr ad es : 37% formaldehyde by weight, 6.5%15% methanol by weight. Co n t a in e r s : 25-lb. cases (lb. bottles); 100-lb. carboys; 90- and 475-lb. drums; 26,000to 38,000-lb. tank trucks (within a 200-mile radius of Perth Amboy, New Jersey and Toledo, Ohio); 72,000-lb. tank cars. DUP210011407 -krt. l&tl Formamide--Technical--HCONH-: Colorless, viscous Hydrochloric Acid--Reagent--36.5 to 38% HC1 in jj hygroscopic liquid; B. P. 210C.; F. P. 2.5C. Us e: Ex Water Solution: Clear colorless fuming corrosive liquid ceptionally good solvent; softener (e.g., in paper, glues); with pungent odor; soluble in water, alcohol and ether; chemical intermediate. CONTAINERS: 55-gal. drums, 8,000- Sp. Gr. Min. 1.1854. Max. 1.1923: F. P. below --24F. gal. tank cars. (--31.1C.). Us e: For reagent or analytical purposes, or where hydrochloric acid of extremely high purity is re Formic Acid--Technical (Methanoic Acid)--HCOOH in Water Solution: Colorless liquid with irritating and penetrating odor; soluble in water, alcohol, ether and quired; in manufacture of food products. Co n t a in e r s : 1and 5-pt. bottles, 6,V- and 13-gal. carboys, tank trucks, tank cars. glycerin. 85% St r e n g t h 90% St r e n g t h Hydrochloric Acid--Technical and Food Processing (Muriatic Acid, Chlorohydric Acid, Hydrogen Chlo ride)--HCI in Water Solution: Clear colorless or yellow Sp. Gr. 1.201 1.210 ish corrosive liquid with pungent odor; miscible with water and alcohol. F. P. 9F. 24F. F. P. Us e: In dyeing, printing and finishing of textiles; in manu Gr a d e Sp . Gr . %HC1 Be l o w facture of formates, fat and oil hydrogenation catalysts, synthetic camphor, pharmaceutical intermediates, sol vents; for dyeing and deliming in tanning leather; manu facture of vinyl resin plasticizers; in electroplating; for 18 B6. 20 B6. 22 Be. 1.142 1.160 1.179 27.92 31.45 35.21 --40F. --40F. --40F. coagulation of rubber latex. Co n t a in e r s : 125- and 127-lb. 23 Be. 1.189 37.14 --40F. carboys, 515- and 525-lb. drums, tank cars, and tank trucks. Us e: In metal pickling and descaling; in manufacture of inorganic and organic chlorides, chlorinated synthetic "G-942" Tanning Agent: An aqueous solution of the partial sodium salt of a polymeric carboxylic add. Us e: In processing light-weight skins for the production of high grade suede and grain leathers. Excellent properties for white clear through leathers. Possesses high skin-plumping ability. Co n t a in er s : 500-lb. drums. resins and plastics; in the food industry for the hydrolysis of protein and starch, inversion-of sugar and manufacture of edible gelatin; in carbonizing wool and as a bleaching and dyeing assistant in the textile industry; as a prefluxing agent for galvanizing and soldering; in the paper industry for cleaning and scouring wires, screens and felts; for re covery of glycerin in the manufacture of soap; in the puri fication of sand and clay; in deliming, tanning and dyeing "G. B. S." Globular Sodium Bisulfate--Technical: (See Sodium Bisulfate, Page 56.) ' of leathers; for etching aluminum. Co n t a in e r s : 125- to 130-lb. carboys, tank cars, and tank trucks. Glycolic Acid: (See Hydroxyacetic Acid.) Hydrochloric Acid, Inhibited: (See "Duclean" No. 2 Inhibited Hydrochloric Arid, Page 51.) "Hexalin" Cyclohexanol--CeHnOH: Colorless liquid; F. P. (pure) 25.2C. (usually shipped with 2.25% methanol as anti-freeze); B. P. (pure) 161.1C. Us e: Solvent in lacquers, shellacs and varnishes; homogenizer and stabilizer in soap, drydeaning and textile industries; intermediate for chemicals, plasticizers, lubricating oil additives. Co n t a in e r s : 55-gal. drums, 8,000- and 10,000-gal. tank cars and tank trucks. Hexamethylenetetramine (Urotropin, Hexamine)-- (CH,),N4: A white powder or granular solid; soluble in water, chloroform, and alcohol. At 263C. it sublimes with out melting; on contact with fire, it readily ignites and bums with a smokeless flame. Us e: In manufacture of phenolic molding resins, cork products, rubber accelerators, and pharmaceuticals; in chemical synthesis; for hardening casein, glue, and other proteins. Co n t a in e r s : 50-lb. multiwall bags; 150- and 200-lb. drums. Te c h n ic a l Gr a d e: Granular and powder forms. Con tains 0.3% max. ash and 0.3% max. moisture. Te c h n ic a l Gr a d e FF: Granular FF contains 0.3 %0.7% anticaking agent; 0.7% max. ash and 0.3% max. moisture. Powder FF contains 2.25%-3.75% anticaking agent; 3.5% max. ash and 0.3% max. moisture. `Hydrofluoric Acid--Technical--HF in Water Solu tion: Clear colorless fuming liquid; attacks iron, glass and ceramic ware. St r e n g t h Sp . Gr . F.P. Be l o w 70% 1.258 --94.3F. Us e: As a pickling agent for stainless steels and for the removal of silica and siliceous scales from cast iron and steel products; in manufacture of alkylation catalysts, re frigerants, fluorides and acid fluorides; for etching and frosting glass. Co n t a in e r s : 20-, 30-, and 55-gal. drums, tank cars. Hydroxyacetic Acid (Glycolic Acid)--Technical Grade 70%--HOCHsCOOH: Light straw colored liquid con taining approximately 70% hydroxyacetic acid with traces of other organic adds; F. P. 10C. Us e: In dyeing and tan ning of leather; dyeing of textiles; manufacture of cleaning compounds; adhesives; adhesives emulsifier; neutralizing agent--pH control; and sequestering agent; bright-dipping of copper, electro-polishing of stainless steel, and electro plating. Co n t a in e r s : 55-gal. lined steel drums, 6,000- and 10,000-gal. tank cars. 52 DUP210011408 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS "Hytrol" O Cyclohexanone--C3Hn>0: Colorless liquid; B. P. 156.7C.; F. P. --47C. Us e: As a solvent in the textile, paint and varnish industries, especially for vinyls; as a chemical intermediate; lube oil additive. Co n t ain er s : 55-gal. drums, 8,000- and 10,000-gal. tank cars. "Lorol" 11 Fatty Alcohol Technical: Colorless liquid containing about 80% lauryl and 20% myristyl alcohol. Sp. Gr. (25"/25C.) 0.832-0.836. Us e: Manufacture of lauryl chloride and its derivatives. Co n t ain e r s : 55-gal. drums, 8,000-gal. tank cars. Iron Sulfate: (See Ferrous Sulfate, Page 51.) Lactic Acid--Technical, Food Processing and Plastics (Alpha-Hydroxypropionic Acid)--CHsCHOHCOOHin Water Solution: Various strengths; dear, colorless to dark brown, syrupy liquid; misdble with water and alcohol. Us e: In manufacture of phenolic plastics, lactates, and emulsifiers; anti-perspirants; as a delimer, plumping agent and acidulant in vegetable tanning of leather, and in manu facture of synthetic tanning compounds; as a mordant and assistant in textile dyeing and finishing; in brewing; as an_ acidulating agent in manufacture of processed cheeses, pickles, olives, pectin, carbonated beverages, jams, jellies, infant foods. Co n t a in e r s : 120-lb. carboys, 440- to 465-lb. bbl., 490-500 lb. Liquipack drums, tank cars, and tank trucks. Lactic Acid--U. S. P. (Alpha-Hydroxypropionic Acia --85%) CHsCHOHCOOH in Water Solution: Clear, colorless, syrupy liquid; optically inactive; soluble in water, alcohol and ether; insoluble in benzol and carbon disulfide; F. P. approximately --40F. (--40C.). Us e: In manu facture of pharmaceuticals and chemicals. Co n t a in e r s : 120-lb. carboys. Lauryl Alcohol: (See "Lorol" 5 and 7 Fatty Alcohol Technical, below.) "Lignasan" X Fungicide: A blue powder containing ethyl mercury phosphate. Us e : In the pulp and paper in dustry for slime control and pulp preservation; as a pre servative for paper sizes. Co n t a in e r s : 125-lb. drums. "Lorol'' Fatty Alcohols: A group of straight chain (normal) even-numbered-carbon alcohols ranging from C-8 (octyl) to C-18 (stearyl). "Lorol" 5 Fatty Alcohol Technical: Colorless viscous liquid; Sp. Gr. (25/25C.) 0.832-0.836; mixture of straight chain (normal) even-numbered-carbon alcohols (C-10 to C-18) with lauryl alcohol predominating. Us e: Intermedi ate in manufacture of detergents, lubricating oil additives, quaternary ammonium compounds, mercaptans and textile finishing agents. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 7 Fatty Alcohol Technical: Colorless liquid; Sp. Gr. (25/25 0C.) 0.832-0.836. Similar to "Lorol" 5 except that it contains a higher percentage of stearyl alcohol. Us e: Intermediate in manufacture of lubricating oil additives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 9 Fatty Alcohol Technical: Colorless liquid containing about 70% lauryl alcohol. Sp. Gr. (25/25C.) 0.832-0.835. Us e: Manufacture of lauryl chloride and its derivatives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 20 Fatty Alcohol Technical -- CH3(CH!)tCH>OH: Colorless liquid. B. P. (pure) 195C. Sp. Gr. (25/25C.) 0.823-0.826. Essentially normal octyl alcohol. Us e : Antifoam agent, intermediate in manufacture of plasticizers, lubricating oil additives and perfumes. Co n t a in e r s : 5S-gal. drums, 8,000-gal. tank cars. "Lorol" 22 Fatty Alcohol Technical -- CH3(CHs)tCHsOH: Colorless liquid. B. P. (pure) 231C. Sp. Gr. (25/25C.) 0.828-0.832. Essentially normal decyl alcohol. Us e: Antifoam agent, intermediate in manufacture of quaternary ammonium compounds, lubricating oil additives, perfumes and plasticizers. Co n t a in er s : 55-gal. drums, 8,000-gal. tank cars. "Lorol'' 24 Cetyl Alcohol--National Formulary Grade --CHj(CH0nCHsOH: White flakes; M. P. (pure) 49.6C. Cetyl alcohol meeting the requirements of the National Formulary VIII. Us e: Emulsifying and softening agent in cosmetics, salves and ointments. Co n t a in e r s : 140-lb. fiber containers. "Lorol" 28 Industrial Fatty Alcohol -- CH3(CHs)is CH>OH: White flakes; M. P. (pure) 58.0C. Technical grade stearyl alcohol. Us e: Mold lubricant, intermediate in manufacture of lubricating oil additives, quaternary ammonium compounds and textile finishing agents. Co n t a in e r s : 50-lb. paper bags. "Lorol" 28 Stearyl Alcohol --U. S. P. Grade -- CH3(CH2)13CH1OH: White flakes. M. P. (pure) 58.0C. Stearyl alcohol meeting requirements of U. S. P. Us e : In gredient in lipsticks, cosmetic creams, lotions, ointments and salves. Co n t ain er s : 50-lb. fiber containers. "Ludox" AS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% SiOa and 0.25% NH3; pH at 25C. 9.5 to 9.6; F. P. 32F. (0C.). Us e: See "Ludox" HS and LS colloidal silicas, below. Suitable for applications requiring a volatile stabilizer and which would be detrimentally affected by sodium ions present in other grades of "Ludox" colloidal silica. Co n t a in e r s : 55-gal. drums. "Ludox" HS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% SiOa. Ratio, wt., NaaO:SiOs, 1:95; pH at 25C. 9.65 to 10.15; F. P. 32F. (0C.). Us e: For antislip treatment of rayon, cotton, and wool staple for improved yam strength; compounding and post-dip treatment of latex foams and films to improve modulus and effect rubber savings; modifying latex ad hesives for improved bond strengths; for increased hardness and slip resistance in emulsion floor waxes; improved water and heat resistance of adhesive coatings and fibrous struc- 53 DUP210011409 m um* aWMIWNMW IWWW' - if- INDUSTRIAL CHEMICALS tures; for antisoil treatment of pile fabrics and miscel laneous substrates; frictionizing agent for paper; binder for inorganic materials; precoating photo sensitized paper for color contrast. Co n t a in e r s : 55-gal. drums, tank trucks, and tank cars. "Ludox" LS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% SiOs. Ratio, wt, NasO:SiOg, 1:285; pH at 25C. 8.2 to 8.7; F. P. 32F. (0C.). Us e: See "Ludox" HS Colloidal Silica, above. Co n t a in e r s : 55-gal. drums, tank trucks, and tank cars. "Ludox'' SM Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 15% SiOs charac terized by extremely small particle size averaging only 7 millimicrons. Ratio, wt., Na90:SiOs, 1:159; pH at 25C. 8.1; F. P. 32F. (0C.). Us e: Binder for inorganic fibrous ma terials; antisoil applications to smooth surfaces; paper coatings to improve abrasion resistance, printability and other properties; latex adhesive compositions for improved adhesion, etc. Co n t a in e r s : 55-gal. drums. Methanol--CHaOH: Colorless flammable liquid; B. P. 64.7C.; F. P. --97C.; Sp. Gr. (20/4C.) 0.7913. Us e: Ingredient of automotive and other anti-freezes; in manu facture of formaldehyde; in manufacture of many methyl esters (e.g., dimethyl phthalate, methyl chloride); injection fluid for increasing power and octane rating of aviation gasoline; as a constituent of many solvents for varied pur poses. Co n t a in e r s : 55-gal. drums; 6,000-, 8,000- and 10,000-gal. tank cars, and tank trucks. Methanol Formaldehyde 33-55: Clear, colorless reaction product containing approx. 33% by weight methanol, 55% formaldehyde, and 12% water. Weight per gal. 8.9; viscosity 2.8 cp. at 25C. Us e: In formaldehyde reactions where low water is preferred and the reaction medium is methanol; in manufacture of methylated urea and methylated melamine resins for use in paper and textile treatment, coatings, and laminating adhesives. Co n t a in e r s : 55-gal. drums; 4,000-gal. tank trucks (within 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. Methanol Formaldehyde 43.5-46.5: Clear, colorless reaction product containing 43.5% by weight methanol, 46.5% formaldehyde and 10% water. Weight per gal. 8.9; viscosity 2.1 cp. at 25C. Us e: In formaldehyde reactions where low water is preferred and the reaction medium is methanol; in manufacture of methylated urea and methy lated melamine resins for use in paper and textile treatment, coatings, and laminating adhesives. Co n t ain e r s : 55-gal. drums; 4,000-gal. tank trucks (within 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. Methyl Formate--Technical (97%)--HCOOCH,: Col orless, mobile, volatile liquid; B. P. 31.8C. Us e: As an ingredient in fumigants; as a solvent; in manufacture of formates, sulfa drugs and organic chemicals. Co n t ain er s : 55-gal. drums; 8,000- and 10,000-gal. tank cars. Mineral Adhesive Solution--Technical: A mineral base adhesive modified to obtain rapid wetting and good ad hesion. Us e: For bonding metal foil to paper; for bonding insulating materials to metal. Co n t ain er s : 55-gal. drums, tank cars. 54 Mold and. Rope Inhibitors: (See "Mycoban" Calcium Propionate and "Mycoban" Sodium Propionate, below.) Monomethylamine--Anhydrous and Aqueous Solu tions--CHsNHs: Anhydrous--colorless gas, clear and water white when liquefied. Us e: In the manufacture of pharmaceutical intermediates for the xanthine alkaloids, theophylline, caffeine, the sympathomimetic drugs such as ephedrine, and the analgesic meperidine; in manufacture of surface active agents; photographic developers; dyes; in manufacture of soil fumigants and fungicides for agri culture. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solutions--55-gal. drums, tank trucks, tank cars. Muriatic Acid: (See Hydrochloric Add--Technical, Page 52.) Muriatic Acid, Inhibited: (See "Duclean" No. 2 Hydro chloric Add Solution Inhibited--Technical, Page 51.) "Mycoban" Calcium Propionate--Ca(CH3CH9COO)9: White powder. Us e: Inhibitor of mold and certain other microorganisms in baked goods, pasteurized process and blended cheeses and cheese foods packaged as slices and cuts for consumer distribution, and tobaccos. Co n t a in e r s : 250-lb. drums. "Mycoban" Sodium Propionate--CH3CHsCOONa: White powder. Us e : Inhibitor of mold and certain other microorganisms in baked goods, pasteurized process and blended cheeses and cheese foods packaged as slices and cuts for consumer distribution, and tobaccos. Co n t a in e r s : 60-lb. cartons (six 10-lb. packages), 250-lb. fiber drums. Niter Cake: (See Sodium Bisulfate, Page 56.) Nitric Acid--Reagent--69-71% HNOj in Water Solu tion: Clear, colorless, highly corrosive liquid; soluble in water and ether; decomposes alcohol; Sp. Gr. 1.416-1.426; F. P. below --40F. (--40C.). Us e: As a reagent in chemi cal analysis and for other uses for which HNOa of extremely high purity is required; as an etchant in metallography. Co n t a in e r s : 1- and 5-pt. bottles, 6j/- and 13-gal. carboys, tank trucks. Nitric Acid--Technical and Engraver's Quality (Aqua Fortis, Hydrogen Nitrate, Azotic Acid)--HNOs in Water Solution: Clear, colorless to light brown, fuming, corrosive liquid; miscible with water. Gr a d e Sp. Gr . %h n o 5 F. P. Be l o w 36 B6. 38 Bd. 40 Be. 42 B6. 95% 1.330 1.335 1.381 1.408 1.493 52.3 -- 2F. 56.5 -- 4F. 61.4 -- 9F. 67.2 --30F. 95.0 --40F. Us e: As an ingredient in nitrating add; in manufacture of explosives, celluloid, nitrocellulose, lacquers, dopes, ce ments, dry colors, inorganic nitrates, insectiddes, fertil izers, pharmaceuticals and vitamin products; as a nitrating agent in manufacture of dyes, intermediates, aniline, DUP210011410 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL c h e mic a l s nitrobenzene, quinoidine, etc.; for pickling and bright dipping stainless steel, copper alloys, aluminum and nonferrous metals; as a pickling agent for steel products; for passivating stainless steel and other nickel-chrome alloys; for purifying petroleum sludge acid; as an etching agent for zinc photoengravers' plates; for general oxidizing pur poses. Co n t a in e r s : Technical--144- to 152-lb. carboys, 163- to 600-lb. drums. "Nogas" Metal Pickling Agent: Amorphous, brown powder; soluble in water and adds. Will give foam-pro ducing solutions when dissolved in water or adds. Us e: As an addition agent in add pickling of iron and steel to produce a foam blanket and to improve the atmosphere by elimination of add mist particles given off by the pickling operation. Co n t a in e r s : 65-lb. fiber drums, 300-lb. bbl. Oetanol: (See "Lorol" 20 n-Octyl alcohol, Page 53.) Oleum (Fuming Sulfuric Acid)--HaS04 and SOs: Nearly colorless, fuming, corrosive liquid; soluble in water with violent evolution of heat; furnished in various strengths. Us e: As an ingredient, in mixed acids for ni tration purposes, such as in manufacture of explosives, dyes, intermediates and nitrocellulose products; in sulfonation of vegetable, marine and petroleum oils; in refining petroleum; for fortification of dilute sulfuric add; for general organic sulfonation. Co n t a in e r s : 775- to 825-lb. drums, tank cars, and tank trucks. Paraformaldehyde (Paraform, Trioxymethylene)-- (CHsO)x-HsO: A white powder or granular solid; slowly soluble in water and alcohol; evolves formaldehyde gas when heated; CHaO content min. 95%. Us e: In manu facture of synthetic resins, pharmaceuticals and cork products; for hardening casein and glue; as a germicide, fungiride, deodorant; for fumigation. Co n t ain er s :" 50lb. multiwall bags; 100-, 125-, 250-, and 300-lb. drums. 'Phenottiiazine: Drench Compound and N. F. Powder. Us e: As an antioxidant for synthetic lubricating oils and as a polymerization inhibitor. Co n t a in e r s : 150-lb. fiber drums. 'Phosphoric Acid--Technical and Food Processing --75% and 80% H3P04 in Water Solution: Colorless, syrupy liquid; miscible with water in all proportions; F. P. 75% below --10F. (--23.3C.). Us e: As a pickling and rust-proofing agent, ceramic vitrifying agent and flux; in manufacture of phosphate salts; in plastics manufacture. Co n t a in e r s : 160- to 180-lb. carboys, 700- to 750-lb. drums, tank cars, and tank trucks. 'Phosphoric Acid 85%--N. F.--H3PO<: Colorless, syr upy liquid; miscible with water; Sp. Gr. 1,69; F. P. approxi mately 20C. Us e: In manufacture of dental cements, pharmaceuticals and food products; as an acidulating agent in jellies, soft drinks, etc. Co n t a in e r s : 170- to 180-lb. carboys; 750- to 775-lb. drums, tank cars, and tank trucks. Potassium Silicate--Glass Technical: Weight ratio SiO:KsO= 2.1; Colorless, anhydrous lump or white powder; soluble in water at elevated temperature and pressure. Us e; In manufacture of glass, ceramic, refractory materials and welding rods; in manufacture of potassium silicate solutions. Co n t a in e r s : 200-lb. burlap bags, 500-lb. drums. Potassium Silicate--Solution--Electronics 200-- Technical: Filtered, water white solutions having a SiO:KjO weight ratio of 2.07; especially low in heavy metals content. Us e: In coating cathode ray tubes with phosphors, in other uses for potassium silicate where a product of superior clarity and purity is required. Co n t a in e r s : 55-gal. polyethylene lined drums, tank cars, tank trucks. Potassium Silicate--Solution--Technical: Various ra tios of SiOs:KaO in water solution; colorless mobile liquid at gravities of 30-40 Be. Us e: As a non-efflorescing base for inorganic paints and protective coatings; as a coating for roofing granules and welding rods; as a binder in manu facture of carbon electrodes; as an ingredient in flame re tardant paints and compositions. Co n t ain er s : 55-gal. drums, tank cars, tank trucks. "Quilon" Chrome Complex: A Werner type chromium complex in isopropanol. USE: As a water repellent and siz ing treatment of paper and other cellulosic materials; for treatment of felt hats, leather, wool fabrics, hydrophobic fibers, and siliceous and other negatively charged surfaces; as an anti-blocking or release agent; for insolubilizing various water soluble or swellable coatings. Co n t a in e r s : 6}4-gal. carboys, 55-gal. drums. Sal Ammoniac: (See Ammonium Chloride, Page 49.) Sait Cake--Industrial Grade (Sodium Sulfate); So dium Sulfate SR--Na3S04: White granular or powdered, crystalline material; soluble in water; containing a mini mum of 95% NajSO*. Us e: In manufacture of sulfate and kraft paper, glass, sodium sulfide and other mineral salts, blanc fixe, ceramic glazes; as an ingredient in mineral animal foods. Co n t a in e r s ; 100-lb. bags, bulk. 'Soda Ash: (See Sodium Carbonate, Page 56.) 'Sodium Acid Fluoride--Technical (Sodium Bifluo ride)--NaHFj : White crystalline powder; soluble in water. Us e: As a laundry sour; in etching glass; an ingredient in electroplating solutions. Co n t a in e r s : 150- and 375-lb. drums. 'Sodium Bicarbonate--Technical and U. S. P. (So dium Acid Carbonate, Baking Soda)--NaHC03: White crystalline or granular material; soluble in water; insoluble in alcohol; loses COj at 270C. Us e: In manufacture of baking powder, pharmaceuticals, effervescent salts and food products; as a neutralizing agent in leather tanning, textile, food and paper industries; as an ingredient in fire extinguishing compounds. CONTAINERS: 100-lb. bags. DUP210011411 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS 'Sodium Bichromate--Technical (Sodium Dichro mate)--Na:Cr:07'2Hi0: Reddish, deliquescent crystals or fine, granular material; soluble in water; insoluble in alcohol; decomposes at 400C. Us e: In chrome tanning of leather and as an insolubilizing agent for glue, gums and gelatin; in manufacture of chrome pigments, for pickling copper alloys; as a corrosion inhibitor in aqueous systems. Co n t a in e r s : 100-lb. bags, 100- and 400-lb. drums. Sodium Metasiiicate--Technical--Na2Si03-5H2 0: White, granular, translucent solid; soluble in water; in soluble in alcohol; aqueous solution strongly alkaline in reaction. Us e: As a soap builder and ingredient in de tergents and cleaning compounds for cleaning fabrics, glass, ceramics, metal products, etc.; as a detergent in kier boiling of cotton goods; as a water softener. Co n t a in e r s : 100-lb. bags. 'Sodium Bifluoride; (See Sodium Acid Fluoride, Page 55.) Sodium Bisulfate--Globular Technical "G. B. S." (Sodium Acid Sulfate, Niter Cake, Bisulfate of Soda) --NaHSO<: White, opaque or translucent, globular shaped pellets; soluble in water; aqueous solution strongly acid in reaction. Us e: As an ingredient of cleaning compositions, metal pickling compounds, metallurgical fluxes. Co n t ain er s : 100-lb. bags, 100- and 400-lb. fiber drums, bulk. Sodium Bisulfite--Solution--Technical and Food Processing (Sodium Acid Sulfite)--NaHSO, in Water Solution: Clear, colorless liquid with sulfurous odor; con tains at least 37% NaHSOj. Us e: In the manufacture of dyes, intermediates, and other organic chemicals. Co n t a in e r s : 505-lb. bbl. 'Sodium Nitrate--Technical (Chile Saltpeter, Soda Niter)--NaNO, : Colorless or white, hygroscopic, crystal line material; soluble in water; slightly soluble in alcohol and glycerin; M. P. approximately 308C.; decomposes with further heating. Us e: In manufacture of potassium nitrate, red lead, dyes and intermediates, explosives and pyrotechnics; as a constituent of metal fluxes and heat treating salts; as an ingredient in enamels and glass; for fixing the color of cured meat and poultry products; as a general oxidizing agent. Co n t ain e r s : 100-Ib. bags. 'Sodium Phosphate--Di--Anhydrous--Fond Grade --NasHP04: White granular or powder; soluble in water; insoluble in alcohol. USE: Boiler water treatment; in mak ing glazes for potteries, porcelains and chinaware; as an emulsifier in making process cheese; in manufacture of pigments such as cobalt phosphate. Co n t a in e r s : 100-lb. paper bags, 125- and 350-lb. fiber drums. 'Sodium Carbonate--Anhydrous Technical (Soda 'Sodium Phosphate--Tri--Technical and Food Grade j ( Ash, Calcined Soda)--Na3C03(5S%Na20): White, (Trisodium Phosphate)--Na3P04'12HsO (Dodecahy- ; amorphous powder, dense or light; soluble in water; M. P. drate)--Anhydrous Grade also available: Colorless ! 851C. Us e: In manufacture of sodium compounds and crystals; soluble in water; M. P. approximately 73C.; other chemicals, glass, soaps, ceramics, detergents, paper; aqueous solution alkaline in reaction. Us e: As a water ; as a water softener for treatment of municipal and in softener; in manufacture of phosphates, soaps, detergents, dustrial supplies; as a detergent in laundries; as an in- paint cleaners, boiler compounds, scouring powders, house | gredient in metal cleaning compositions. Co n t ain er s : hold cleaners; as an alkali builder for laundries; for cleaning J 100-lb. bags, bulk. textiles, glass, metals, dairy and food processing equipment; for neutralizing add residues on pickled steel. Co n t ain er s : Sodium Dimethyl Dithiocarbamate--40% Solution 100-lb. bags, 100- and 325-lb. fiber drums. --Technical--(CHs)aN-CSSNa: Amber colored, clear water solution; Sp. Gr. 1.2. Us e: As an accelerator short stop in the rubber industry. Co n t a in e r s : Tank cars, tank trucks and 540-lb. drums. Sodium Propionate: (See "Mycoban" Sodium Propi onate, Page 54.) 'Sodium Pyrophosphate--Technical (Tetrasodium 'Sodium Fluosilicate: (See Sodium Silicofiuoride, Page 57.) Pyrophosphate)--NaPgO;: White, granular, powdered or amorphous material; soluble in water; insoluble in alco hol; aqueous solution possesses an alkaline reaction, water softening and dispersing action on hard water soaps, days | 'Sodium Hydroxide--Technical (Caustic Soda, So- and other inerts. Us e: In manufacture of iron and other I dium Hydrate, Lye)--NaOH: White, deliquescent, pyrophosphates; as a water softener, soap builder and as amorphous solid, flakes or crystalline material; soluble in an ingredient in detergents for cleaning fabrics, glass, water, alcohol and glycerin; M. P. 318C. Also as a color less water solution. Us e: In manufacture of soap, sodium salts, rayon, chemical wood pulp, intermediates, indigo, aniline dyes, phenols, paper, mercerized cotton, paints, metals, etc.; in electroplating solutions; in thinning day slips for paper coating; in wool scouring; as a general dispers ing agent. Co n t a in e r s : 100-lb. bags, 100- to 325-lb. fiber drums. pigments and varnishes; for refining petroleum and vege table oils; in reclaiming rubber, softening water; in bleach Sodium Silicate--Glass--Technical--Ratio % Si(V ing, dyeing and printing of textile fabrics; as a detergent %NasO--1.95 and 3.25: Clear, colorless to slightly green ij for cleaning textiles, metals, etc.; as a plating and storage ish, glassy lumps or white powder; soluble in water at ele |! battery electrolyte. Co n t ain er s : Liquid--tank cars, tank vated temperatures and pressures. Us e: In manufacture of i! trucks. Other grades--in drums. sodium silicate solutions; in enamel frits; in coated welding rods and cement. Co n t a in e r s : 100-lb. burlap bags, 425- and 500-lb. drums, bulk. Dissolvers available on rental ; Sodium Hyposulfite: (See Sodium Thiosulfate, Page 57.) basis for preparing large volumes of solution. DUP210011412 INDUSTRIAL CHEMICALS Sodium Silicate Solution--Technical (Liquid Silicate of Soda, Water Glass): Clear or slightly cloudy liquids of various SiOa NasO ratios; gravity from 34-60 Be. Us e: As a corrugated boxboard adhesive; in the manufacture of s^ica gel; in the manufacture of hot-top collars for pouring molten metal; as a welding rod coating; in manufacture of soap; as a stabilizer in peroxide bleaching of cotton and rayon; for silk weighting; in foundry core binders; in roofing granules. Co n t ain er s : 55-gal. drums, tank cars, and tank trucks. *Sodium Silicofluoride--Technical (Sodium Fluosilicate)--NasSiFs: White, granular powder; moderately soluble in water; insoluble in alcohol; aqueous solutions possess an acid reaction. Us e: As an opacifier in manu facture of glass and enamels; as a flux in vitreous enamels and in remelting secondary aluminum; in electrodeposition of tin and lead. Co n t a in e r s : 100-lb. bags, 125- and 400-lb. drums. *Sodium Sulfate--Anhydrous--Technical (Super Sulfate of Soda)--NagSO,: White crystals; soluble in water; M. P. 884C. Us e: In the manufacture of glass; for standardizing dyes and dyeing textiles; as a builder and filling agent in detergent products; in manufacture of chrome pigments. Co n t a in e r s : 100-lb. bags, bulk. Sodium Sulfate--Industrial: (See Sait Cake, Page 55.) "Sodium Sulfide--Technical--60% NasS:Deliquescent, yellow to brown solid or thick flakes. Aqueous solution I--------- strongly-alkaline in reaction. Us e :-As a-depilatory in-tan ning; in textile dyeing and printing; the benefidation of ores and precipitation of heavy metals. Co n t a in e r s : 350- to 710-lb. drums. J "`Sodium Sulfite--Anhydrous Technical--NasS03: Tan or slightly pink, crystalline powder; soluble in water; slightly soluble in alcohol; aqueous solution possesses a | reducing action. Us e: As a bleach and general reducing I agent in manufacture of dyes and intermediates; de- oxygenating boiler feed water; as an antiseptic and pre servative. Co n t a in er s : 100-lb. paper bags. , - Sodium Thiosulfate--Technical, Food Processing and Photo Quality (Sodium Hyposulfite, Hypo, Antichlor)--NasSsOs'5HiO: Colorless to white, translucent, efflorescent crystals; soluble in water; insoluble in alcohol; M. P. approximately 48C.; decomposes with further heat ing. Us e: As a reducing agent in chrome tanning of leather; i to dissolve silver salts ("fixing") in photography; as an' | antichlor in bleaching of paper, pulp, textiles, etc.; in ! manufacture of dyes. Co n t a in e r s : 100-lb. bags. Sodium Thiosulfate--Anhydrous Technical, Food Processing and Photo Quality (Sodium Hyposulfite, ; Hypo, Antichlor)--NasSjOs: White granular crystals; : soluble in water; insoluble in alcohol. Us e: As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper, pulp, textiles, etc. Co n t a in e r s ; 64- and 100-lb. bags. | "Sodium Tripolyphosphate--Technical--NasPsOid I White, powdered or granular, free-flowing material; solu| ble in water. Us e: Household and industrial cleaning 1 compound formulations; textile processing; dairy deter| gents; deflocculation of clays and other solids in suspension. I Co n t ain er s : 100-lb. bags, 100- and 325-lb. fiber drums. Stearyl Alcohol: (See "Lorol" 28 Stearyl Alcohol, Page S3.) Strontium Nitrate--Technical--Sr(NOs)a: White crys talline powder; soluble in water; slightly soluble in alcohol; Sp. Gr. 2.98; purity approximately 97%; flame tests carmine-red. Us e: In manufacture of railroad and highway flares, marine signals, fireworks, pyrotechnics, and color pigments. Co n t a in e r s : 100-lb. bags, 600-lb. bbl. Sulfamic Acid--Technical--Crystal and Granular Grades, HSOsNHs: White crystalline or granular solid, soluble in water; aqueous solutions approach the common mineral adds in aridity; all common salts highly water soluble. Us e: For removing scales and deposits from boil ers, heat exchangers, condensers, evaporators, jacketed vessels, etc.; Felt shower water pH adjustment to retard felt fillup; chlorine stabilization and pH reduction agent for swimming pools; oil well descaling agent; as an in gredient in household cleaning formulations; in nitrite removal in azo dye manufacture and piece dyeing of tex tiles and leather; in sulfation of alcohols; as a catalyst for urea-formaldehyde resins; as the electrolyte in plating baths. Co n t a in e r s : 400-, 425-lb. fiber drums. "Sulfur--Technical and N. F. (Commercial Flour Technical, Light and Heavy Refined N. F., Flowers of Sulfur Sublimed, Roll Sulfur Technical, Com mercial Rubbermakers' Technical)--S: All grades. Pale yellow, solid, amorphous, crystalline sticks or powder of varying degrees of fineness; insoluble in water; soluble in sodium sulfide, carbon disulfide and sulfur chloride. Us e: In manufacture of rubber, paper, sulfuric acid, ce ments, explosives, pharmaceuticals, glass, paints, matches, leather, pyrotechnics, steel, soaps and for many other materials. Co n t ain er s : 50- to 200-lb. bags, 165- to 500-lb. bbl. Sulfur Trioxide--Stabilized Liquid S03, Gamma Form: Colorless, fuming, corrosive liquid, reacts ex plosively with water. Us es : As a sulfating and sulfonating agent for detergent, lubricating oil additives and synthetic organic chemicals manufacture. Co n t a in e r s : 750-lb. drums, tank cars and tank trucks. Sulfuric Acid--Reagent--95 to 98% H3SO* in Water Solution: Clear, colorless, heavy, oily liquid; dissolves in water with evolution of heat; Sp. Gr. 1.84; F. P. --15C. Us e: As a reagent in chemical analysis or where sulfuric acid of an especially high purity is required. Co n t ain er s : 1- and 5-pt. bottles, 634* and 13-gal. carboys, tank trucks. Sulfuric Acid, Fuming: (See Oleum, Page 55.) Sulfuric Acid, Inhibited; (See "Duclean" No. I In hibited Sulfuric Add, Page 51.) Sulfuric Acid--Technical (Oil of Vitriol)--H2S04: Clear, colorless, heavy, oily, corrosive liquid; soluble in water in all proportions with evolution of heat. All com mercial strengths. Us e: In manufacture of superphos phate fertilizers, ammonium sulfate from by-product coke ovens, mineral colors, explosives, inorganic acids, phosphates, alum, intermediates, dyes and other organic chemicals; in refining of petroleum and manufacturing of sulfonated oils; for pickling iron and steel and bright DUP210011413 INDUSTRIAL AND BiOCHEMICALS DEPARTMENT dipping nonferrous metals; in pickling of hides and chrome tanning of leather; in sizing and parchmentizing paper; in manufacture of synthetic rubber latex, rayon, synthetic detergents, sugar and starch; as a general dehydrating agent; assistant in dyeing, bleaching, carbonizing, mercer izing textiles; production of bleaching clays; animal and vegetable oil refining; catalyst in alkylation process for manufacture of high octane gasoline. Co n t a in e r s ; 180to 200-lb. carboys, 700- and 750-lb. steel drums, tank cars, and tank trucks. Tanning Agent: (See "G-942" Tanning Agent, Page 52.) *Tetrasodium Pyrophosphate: (See Sodium Pyrophos phate, Page 56.) INDUSTRIAL CHEMICALS to --30C. Us e: As a starting material for the preparation of urea formaldehyde resins for the plastics, textile, paper, chemical, and wood industries. Co n t a in e r s : 55-gal. drums; 4,000-gal. tank trucks (within 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. "Volan" Bonding Agent--Methacryiato Chromic Chloride: A Werner type chromium complex in isopropa nol. Us e: As a bonding agent applied to glass fibers used in reinforced plastic laminates to improve the adhesion be tween glass and resin, especially under moist conditions; also to improve adhesive bond between other hydrophilic surfaces such as paper and wood and polymeric coatings or impregnants. Co n t a in e r s : 6}^-gal. carboys and 55-gal. drums. Thiodipropionate Antioxidant: White, low melting solid consisting of mixed esters of thiodipropionic acid; 70% lauryl ester, 20% myristyl ester, and 10% of cetyl ester. Melting point 30-33C., specific gravity of solid is 0.975 at 25C.; specific gravity of liquid is 0.919 at 40C. Us e: Antioxidant for olefin polymers. Chemical preserva_____ ttveimedible fats and oils. Co n t a in e r s : 30 gal. drums with 220 lbs. net product. Trlmethylamine--Anhydrous and Aqueous Solu tions--Technical--N(CH3)5: Anhydrous--colorless gas, clear and water white when liquefied. Us e: Intermediate for choline salts (animal feed supplement) and quaternary ammonium salts; in organic synthesis; in manufacture of ion exchange resins and pharmaceutical intermediates. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solutions--55-gal. drums, tank cars, and tank trucks. Urea, Crystal NF (Carbamide)--(NH)sCO: White crys tals, M. P. 132.7C.; Sp. Gr. (solid) 1.335. Us e: Manufac ture of urea-formaldehyde resins for adhesives, protective finishes, molding powders, and treatment of paper and textiles; for treating wood and textiles; solubilising agent for starches and proteins in adhesives and paper coatings; softening agent for paper and cellulose; intermediate in the manufacture of chemicals, dyes and pharmaceuticals; in gredient in fire-retardant paints; ammoniated dentifrices; in the preparation of skin creams, lotions and deodorants; stabilizer in explosives; blowing agent for porous articles (foamed latex, sponges); dewaxing of oils; medicinal pur poses and (non-corrosive) de-icing of airport ramps and walkways. Co n t a in e r s : 100-lb. paper bags. Urea, Shotted (Carbamide)--(NHg)2CO: Small round white pellets which remain relatively free flowing and noncaldng. Us e: Same as Crystal Urea, except where NF grade is required. CONTAINERS: 100-lb. paper bags. Urea Formaldehyde 25-60: Clear, colorless, stable urea formaldehyde reaction product with F/U molecular ratio of approx. 4.8 to 1. Contains (by weight) 60% formalde hyde, 25% urea, and 15% water. Weight per gal. 11.1 lb.; viscosity 260 cp. at 25C.; B.P. approx. 100C.; F.P. --20 Wood Preservatives: (See CZC Chromated Zinc Chloride, Page 50; Copperized CZC Chromated Zinc Chloride, Page 50; Zinc Chloride, this page.) "X-12" Flame Retardant: White crystalline material, completely soluble in hot water. Especially formulated to provide temperature stability and improve aging charac teristics. Exerts a stabilizing effect upon many dyes, im proving light fastness and crocking characteristics. Re sistant to removal by drycleaning solvents. Us e: One-step, renewable-type flame retardant treatment for use on cellulosic materials, including cotton, viscose rayon, and paper; not suitable for use on acetate rayon, or synthetic fibers, except where blended with substantial percentages of cellvfiosic varieties. Co n t a in e r s : 50-lb. fiber drums, 100lb. paper bags. Zinc Ammonium Chloride--Technical--ZnCh' 3NHCI: Granular or crystal; foaming and nonfoaming; soluble in water. Us e: As a fluxing salt for hot dip gal vanizing of pipe, tubes, tanks, malleable iron fittings, wire, etc.; as a flux in metal soldering and tinning; in electric batteries; in manufacture of soldering compounds. Co n t a in e r s : 100-lb. paper bags, 400-lb. drums. Zinc Ammonium Chloride--High Ratio WA--Tech nical--ZnCls-1.9NHiCI; White crystals; soluble in water. Us e: As a prefiux especially in continuous galvanizing operations. Co n t a in e r s : 100-lb. paper bags. Zinc Chloride--Fused and Granular Technical (But ter of Zinc)--ZnClj: White translucent, hygroscopic solid or white, granular powder; soluble in water and alcohol; M. P. 262C.; B. P. 732C. Solution: ZnCl* of various concentrations in water solution; clear, colorless solutions; miscible with water in all proportions, becoming slightly turbid at high dilutions. Us e: As an ingredient in dry cell batteries, oil well completion fluids, tinning, galvanizing and soldering fluxes; for preservation and flameproofing of wood; in manufacture of vulcanized hard fiber, inter mediates, dyes, in reclaiming synthetic rubber. Co n t a in e r s : Granular--50- and 650-lb. drums. Solution-- 170-lb. carboys, 690-lb. drums, tank cars. Fused--1,100-lb. drums. 58 DUP210011414 ANTI-FREEZE PRODUCTS Commercial Methanol Anti-Freeze (C.M.A.): A meth anol base product with chemical rust and corrosion inhibitor. Has good heat transfer properties. Recommended for protection to --30F. in vehicles with standard (160F.) opening thermostats. Co n t a in e r s : 55-gal. drums. "Telar" Anti-Freeze and Summer Coolant: A con centrated ethylene glycol base product with special rust inhibitors that protect all cooling system metals, including aluminum, against rust and corrosion in winter and sum mer. It can be mixed with any potable water and never needs to be drained from a properly operating cooling system. A built-in signalling system, Color Check, warns of cooling system failure. The color of "Telar", bright red, changes to yellow when serious cooling system failure occurs and the coolant turns corrosive. Recommended for use in all liquid cooled internal combustion engines. Co n t a in er s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case). "Zerex" Anti-Rust Anti-Freeze: A concentrated ethy lene glycol-base product made to a special DuPont formula. It contains MR-8, a special chemical rust in hibitor that gives excellent protection to all metals, in cluding aluminum, found in the cooling system. It will prevent rust and corrosion in the cooling system for one season. It is non-evaporating and non-foaming. Recom mended for all types of liquid cooled internal combustion engines where one season's use is desired. Co n t a in e r s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case); 54-gi. drums. "Zerone" Anti-Rust Anti-Freeze: A methanol-base product designed to give effective and economical anti freeze protection to liquid cooled automotive cooling sys tems. It also contains special rust inhibitors. "Zerone" is a very effective anti-freeze that requires about 25% less product to protect to a given temperature than the same quantity of ethyl alcohol or ethylene glycol. Recom mended for use with normal-operating thermostats (below 160F.). Co n t a in e r s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case); 54-gal. drums. 1 wapfe. ! 59 DUP210011415 - I f ; ' i BIOCHEMICALS INSECTICIDES Dairy Cattle Insecticide: Tan wettable powder residual insecticide containing 50% technical methoxychlor. Us e : For dust application to control homilies on dairy cattle and for fly control in dairy bams and premises. Co n t a in e r s : 1-lb. canisters (24 in a case). "Deenate" 50W DDT Insecticide: A wettable powder containing 50% DDT Technical. Us e : As a spray for control of insect pests of fruits and vegetables as well as certain livestock and buildings. Co n t a in e r s : 3-lb. bags (16 in case), 4-lb. bags (12 in a case), 50-lb. bags. EPN 300 Insecticide: A wettable powder containing 25% ethyl p-nitrophenyl thionobenzenephosphonate asthe active ingredient. Us e : As a spray insecticide to control certain mites, scales and other insects such as plum curadio, peach tree borer, orange tortrix, grape berry moth, European com borer and potato aphid on fruits and vegetables; and as a dust ingredient for boll weevil and certain other cotton insects. Also for use by qualified agencies for control of certain mosquito larvae. Co n t a in e r s : 3-lb. bags (12 in a case). Lead Arsenate Insecticide--1"NuRexform" Standard: A poisonous powder (colored pink to comply with insecti cide laws in several states). Us e: For control of codling moth, cankerworm, curculio and most chewing insects feeding on foliage and fruit; for grubproofing turf. Co n t a in e r s : 1-lb. bags (48 in a case), 3-lb. bags (16 in a case), 4-Ib. bags (12 in a case). "Marlate" 50 Methoxychlor Insecticide: A wettable piowder containing 50% technical methoxychlor. Us e : For control of insect pests of vegetables, fruits, forage crops and stored grain as well as livestock. Very low toxicity to warm-blooded animals. Co n t a in e r s : 4-lb. bags (12 in a case), 50-lb. bags. - "Marlate" 2-MR Methoxychlor Insecticide: Emulsifiable formulation containing 2 pounds technical methoxy chlor per gallon. Us e : For control of certain insect pests of forage crops and certain livestock; in grain storage bins; as a space spray for flies. Co n t a in e r s : 1-gal. cans (6 in a case), 5- and 30-gal. drums. 90% Technical Methoxychlor Oil Concentrate: Offwhite solid. Us e : Sold only to manufacturers or processors for preparation of insecticide formulations. Co n t a in e r s : 100-lb. fiber drums, 50-lb. bags. "NuRexform" Standard Lead Arsenate: (See Lead Arsenate Insecticide.) FUNGICIDES Copper-A Compound (Tetra Copper Calcium Oxy chloride): A complex compound containing not less than 45% copper as metallic; finely divided bluish powder. Us e: In control of early and late blight on potatoes, and tomatoes, leaf spot on sour cherries and control of blights on celery, etc.; in manufacture of agricultural copper dust. Co n t a in e r s : 6-lb. bags (8 in a case), 50-lb. bags. " "Fermate" Ferbam Fungicide: A wettable powder containing ferbam (ferric dimethyldithiocarbamate). Us e: To control plant diseases such as scab on apples and pears, cedar rust on apples, blue mold in tobacco plant beds, leaf spot and brown rot on cherries, black rot on grapes, black spot and rust on roses. Co n t a in e r s : 3-lb. bags (12 in a case), 50-lb. bags (see also under Garden Products, Page 53.) "Fermate"DFerbamFungicidalComposition: Black, finely divided powder, containing ferbam (ferric dimethyl dithiocarbamate. Us e : Sold to manufacturers or processors for preparation of fungicide dusts. Co n t a in e r s : 50-lb. bags. "Lignasan" Fungicide: A composition based on ethyl mercury phosphate. Us e: For prevention of surface molds and blue-stain organisms on freshly sawed lumber. Co n t a in e r s : 2-lb. bags (50 in a drum), 125-lb. drums in bulk. "Manzate" Maneb Fungicide: A wettable powder containing. ..maneb . (manganese, ethylenebisdithiocarbamate). Us e : To control many fungus diseases of vegetables such as tomatoes, potatoes, celery, cucumbers, lima beans, onions, peppers and spinach; fruit and nut crops such as apricots, peaches, grapes, and almonds; field crops such as sugar beets; ornamentals such as roses. Co n t a in e r s : 3Tb. bags (12 in a case), 4j'-lb. bags (8 in a case), 50-lb. fiber drums (see also under Garden Products, page 63). "Melsan" Fungicide: A composition based on ethyl mercury phosphate and sodium pentachlorophenate. Us e : For prevention of surface molds and blue-stain organisms on freshly sawed lumber. Co n t a in er s : 150-lb. drums in bulk. "Parzate" Liquid Nabam Fungicide; A solution con taining nabam (disodiura ethylenebisdithiocarbamate) to be combined with zinc sulfate in the spray tank. Us e : For control of early and late blights of tomatoes, potatoes, and celery; certain leaf diseases of truck crops and ornamentals. Co n t a in e r s : 5- and 30-gal. drums. "Parzate" Zineb Fungicide: A wettable powder con taining zineb (zinc ethylenebisdithiocarbamate). Us e: To control early and late blights of tomatoes, potatoes, and celery; downy mildew and certain other leaf diseases of many vegetable crops; tobacco blue mold; for summer control of scab, sooty blotch, Brooks spot and black rot on apples. Co n t a in e r s : 3-lb.bags(12 in a case), 50-lb. bags. "Parzate" C Zineb Fungicide: A wettable powder containing zineb (zinc ethylenebisdithiocarbamate). Us e : For the control of fruit russeting and greasy spot on oranges and grapefruit in Florida, Texas, and Louisiana; other uses same as "Parzate" Zineb Fungicide. CONTAINERS: 3-lb. bags (16 in a case), 5-lb. bags (10 in a case), and 50-lb. bags. "Parzate" B Zineb Fungicidal Composition: A finely divided powder containing zineb (zinc ethylenebisdithio carbamate). Us e : Sold to manufacturers or processors for preparation of fungicide dusts. Co n t ain e r s : 50-lb. bags. a S DUP210011416 `'Sulforon" Wettable Sulfur: Very finely divided sulfur; readily dispersible in water; not less than 97% sulfur; contains a wetting agent. Us e: As a fruit fungicide for control of scab, brown rot, etc. Co n t ain e r s : 6-lb. bags (8 in a carton), 50-lb. bags. "Kloben" Neburon Weed Killer: A wettable powder containing 50% l-n-butyl-3-(3,4-dichlorophenyl)-l- methylurea (neburon). USE: Selective weed control in commercial nursery plantings of certain woody orna mental plants. Co n t a in e r s : '5- and 25-lb. fiber drums. "Sulforon" X Wettable Sulfur: Extremely finely divided wettable sulfur of 5 microns average particle size. Us e: For control of brown rot, scab and certain other fungus diseases of fruits. Co n t a in e r s : 5-lb. bags (10 in a case), 50-lb. bags. "Telvar'' Monuron Weed Killer: A wettable powder containing 80% 3-(p-chlorophenyl)-l,l-dimethylurea (monuron). Us e : As a non-selective weed killer on sites where bare ground is desired. Controls a wide range of annual and perennial grasses and herbaceous weeds. Recommended for non-cropland areas such as utility, highway, pipeline, and railroad right-of-ways; "Thylate" Thiram Fungicide: A wettable powder con petroleum tank farms; lumberyards; industrial plant taining thiram (tetramethylthiuramdisulfide), off-white in sites; irrigation and drainage ditches and around farm color. Us e : To control certain fungus diseases of apples, buildings; also for selective control of weed seedlings peaches, strawberries, celery (in plant beds), and tomatoes. in certain crops such as asparagus, sugar cane, pine It is particularly useful on varieties of apples susceptible to apple, and citrus; and as a spot treatment in cropland russeting such as Golden Delicious and on certain red to control deep-rooted perennial weeds. CONTAINERS: ,, varieties where depth and uniformity of color are desirable. 2-lb. canisters (6 in a case), 50-Ib. bags. { Co n t ain e r s : 5-lb. bags (10 in a case), 50-lb. bags. f "Trysben" 200 Weed Killer: An aqueous solution of the i dimethylamine salt of trichlorobenzoic acid, containing 2 j "Zerlate" Ziram Fungicide: A wettable powder con pounds of acid equivalent per gallon. Us e: Control of i' taining ziram (zinc dimethyldithiocarbamate). Us e : To I control certain plant diseases of truck crops, fruits, and i nuts. Co n t ain e r s : 3-lb. bags (12 in a case), 50-lb. bags. I ---------- -- many species of broadleaf weeds (especially deep-rooted perennials) and certain species of woody vines and brush. Co n t a in e r s : I-gal. cans (4 in a case), 5- and 30-gal. drums. WEED AND BRUSH KILLERS "Ammate" X Weed and Brush Killer--95% Ammo nium Sulfamate: Us e : A non-selective weed and brush killer particularly effective for control of woody plants. Usually used as a foliage application at 60 lb. per 100 gal. of water for control of most species of brush. May be used dry or in solution for preventing sprout growth from stumps and for killing trees such as blackjack oak and various other weed trees. Co n t a in e r s : 40-lb. drums, 60-lb. bags. . "Ammate" Weed and Brush Killer Solution: This product contains 5.6 lb. of "Ammate" X Weed and Brush Killer per gal. For railroad use in tank car lots only. "Dybar" Fenuron Weed and Brush Killer: Pellets containing 25% 3-phenyl-l,l-dimethylurea (fenuron). Us e : For control of certain undesirable woody plants, such as oak, birch, locust, maple, pine, poplar and elm on fence rows, drainage ditches, utility and railroad right-of-ways, and other non-cultivated areas; spot treat-, ment for control of bindweed. Co n t a in e r s : 10-lb. can isters (4 in a case), 50-lb. bags. "Karmex" DL Diuron Herbicide: A suspension con taining 28% 3-(3,4-dichlorophenyl)-l,l-dimethylurea (diu ron). Us e: For pre-emergence weed control in cotton. Co n t a in e r s : J j-gal. cans (6 in a case). "Karmex" Diuron Weed Kiiier: A wettable powder containing 80% 3-(3,4-dichlorophenyl)-l,l-dimethylurea (diuron). Us e : Selective weed control in certain crops such as sugar cane, pineapple, caneberries, alfalfa, grapes, cotton and peppermint; also for same nonselective uses as `Telvar" monuron weed killer. Co n t a in e r s : 2-lb. canisters (6 in a case). "Zobar" Weed Killer: An aqueous solution of the di methylamine salts of polychlorobenzoic acids, containing 4 pounds of arid equivalent per gallon. Us e : Control of many species of broadleaf weeds (especially deep-rooted perennials) and certain species of woody vines and brush. Co n t a in e r s : 1-gal. cans (4 in a case), 5- and 30-gal. drums. SOIL FUMIGANTS VPM Soil Fumigant: A solution containing sodium methyldithiocarbamate. Us e : For control of certain weeds, soil-borne fungus diseases, nematodes and garden centi pedes as a pre-planting treatment to soil in plant propaga tion beds (ornamentals; vegetables and in certain states, tobacco), in the preparation of new turf areas and destruc tion of old turf prior to re-seeding, and for ornamental plants, food and fiber crops as a pre-planting treatment in the field. Co n t a in e r s : 1-gal. bottles (4 in a case), 5-, 30-gal. drums. SEED DISINFECTANTS "Arasan" 75 Thiram Seed Disinfectant and Pro tectant: Active ingredient--75% thiram (tetramethyl thiuramdisulfide). Formulated for dry treatment of seed, but for special uses it may be applied as a slurry. Us e: As seed treatment to reduce losses from seed decay and damping-off of field and sweet com, peanuts, sorghum, rice, soybeans, peas, beans, cucurbits and other vegetable crop seeds; grass seed and small-seeded legumes such as alfalfa and clover; as an animal repellent on coniferous seed. Co n t a in e r s : 'H-o z. envelopes, 8-oz. cans (24 in a case), 2-lb. canisters (12 in a case), 25- and 100-lb. drums. 1 DUP210011417 1 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS "Arasan" Thiram Seed Disinfectant and Protectant: Active ingredient--50% thiram (tetramethylthiuramdisulfide). Us e: Same as "Arasan" 75. Formulated for dry treatment only. Co n t a in e r s : 25- and 100-lb. drums. "Arassn" SF-X Thiram Seed Disinfectant and Pro tectant: Active ingredient--75% thiram (tetramethylthiuramdisulfide); wettable powder for slurry treatment. Us e : For treatment of seeds of same crops for which "Arasan" 75 is recommended, with the exception of onions and conifers. Co n t a in er s : 5%-oz. cans (24 in a case), 25and 100-lb. drums. "Arasan" SF-M Thiram Seed Disinfectant and Pro tectant: Contains 75% thiram (tetramethylthiuramdisulfide) plus 2% methoxychlor for added protection against storage insects; wettable powder for slurry treatment. Us e : Treatment of same crop seeds for which "Arasan" SF-X is recommended. Co n t a in e r s : 25- and 100-lb. drums. "Arasan" 42-S Thiram Seed Disinfectant and Pro tectant: A stable liquid suspension containing 4 lbs. thiram (tetramethylthiuramdisulfide) per gallon; particu larly suited for slurry, dip7 and spray application. Us e : For treatment of seeds of the same crops for which other "Arasan" products are recommended; for spray applica tion to sorghum fields grown for seed to inhibit seed-head mold; for application to fruit trees, ornamentals, shrubs and nursery stock as a repellent against rabbits, deer and birds. Co n t a in e r s : 1-gal. drums (4 in a case), 5and 15-gal. drums. "Ceresan" 75 Liquid Mercurial Seed Disinfectant: Active ingredients--ethyl mercury 2,3-dihydroxy propyl mercaptide and ethyl mercury acetate. Colors seed red. Us e: Undiluted in ready-mix treaters for control of certain seed-borne diseases and to reduce losses from seed decay and damping-off of wheat, oats, barley, rye, sorghum, rice, flax and cotton. Co n t a in e r s : 5-, 30-, and 55-gal. drums. "Ceresan" 100 Liquid Mercurial Seed Disinfectant: Active ingredients--same as "Ceresan" 75, but higher strength. Colors seed red. Us e: Undiluted in ready-mix treaters, or diluted with water for use in slurry treaters for the same disease control and crop seed uses for which "Ceresan" 75 is recommended; for control of snow mold of wheat. Co n t a in e r s : I-, 5-, 30- and 55-gal. drums. "Ceresan" 200 Liquid Mercurial Seed Disinfectant: Active ingredients--same as "Ceresan" 75 and 100 but higher strength. Colors seed red. Us e : Diluted with water in slurry treaters for the same disease control and crop seed uses for which "Ceresan" 75 and 100 are recom mended; for control of snow mold of wheat. Co n t a in e r s : 5-, 30- and 55-gal. drums. "Ceresan" M Seed Disinfectant: Active ingredient- ethyl mercury p-toluene sulfonanilide. Us e : As a dust or as a slurry treatment for the same disease control and crop seed uses as the "Ceresan" liquid mercurials plus sugar beet seed; for control of snow mold of wheat, CONTAINERS: 14-oz. cans (12 in a case), 3-lb. cans (6 in a case), 40- and 100-lb. drums. "Ceresan" (New Improved) Seed Disinfectant: Active ingredient--ethyl mercury phosphate. Us e : Particularly effective as a dip treatment for gladiolus corms. May also be used as a dust treatment on the same crops and for the same purposes as "Ceresan" M. CONTAINERS: 1-lb. (12 in a case) and 100-lb. drums. "Ceresan" (2%) Seed Disinfectant: Active ingredient --ethyl mercury chloride. Us e: For treatment of cotton, peanuts, and pea seeds to control the numerous seed-borne diseases and to reduce seed decay and check damping-off; and as a short soak treatment for basal rot of narcissus bulbs. Co n t a in e r s : lj^-lb. cans (12 in a case), 75-Ib. drums, "Delsan" A-D Seed Protectant: Active ingredients-- thiram (tetramethylthiuramdisulfide) and dieldrin (hexachloroepoxyoctahydro-endo, exo-dimethanonaphthalene). Combination fungicide and insecticide seed treatment for com, peas, beans, cucurbits, rice and sorghum to reduce losses from seed decay, seedling blight, and certain soil insects. For use as a slurry treatment. Co n t a in e r s : 7-o z. cans (24 in a case), 25- and 100-lb. drums. "Semesan" Seed Disinfectant: Active ingredient-- hydroxymercurichlorophenol. Us e : For dust or dip treat ment to control seed-bome diseases, reduce seed decay, and check damping-off of seedlings of vegetable, flower, and certain other crop seeds, bulbs, corms, roots, and tubers. Co n t a in e r s : 4-oz. cans (36 in a case); 12-oz. cans (12 in a case) and 25-lb. pails. "Semesan Bel" Dip Disinfectant: Active ingredients --hydroxymercurinitrophenol and hydroxymercurichloro phenol. Us e ; For dip treatment of Irish and sweet potatoes (seed pieces or slips) to protect against decay and control certain surface-borne diseases. Co n t a in e r s : 3-o z. cans (48 in a case), 1-lb. cans (12 in a case), 4-lb. cans (6 in a case), 40-lb. pails. TURF FUNGICIDES "Semesan" Turf Fungicide: Active ingredient--hy droxymercurichlorophenol. Us e : For prevention and con trol of brown patch and other fungus diseases on fine turf of lawns and golf greens. May be used in combination with "Tersan" 75 for broader, more effective disease control and greater safety to turf. Co n t a in e r s : 114-lb. cans (12 in a case), 25-lb. and 100-lb. drums. "Tersan" 75 Thiram Fungicide: Active ingredient --thiram (tetramethylthiuramdisulfide). Us e : For treat ment of turf to control brown patch and dollar spot; for control of stem rot of sweet potatoes; for control of basal rot and decay of gladiolus bulbs. Co n t a in e r s : 8-o z. cans (24 in a case), 2-lb. bags (8 in a case), 3-lb. bags (12 in a case). "Tersan" OM Thiram-Organic Mercury Turf Fungi cide: Active ingredients--thiram (tetramethylthiuramdi sulfide) and hydroxymercurichlorophenol. A combination product utilizing the advantages of both thiram and organic mercury; ready to use formula eliminates spray tank mix ing of separate products. Us e : For the prevention and control of large brown patch, dollar spot, copper spot, afl" certain other diseases on golf greens, grass tennis courts, lawns and other fine turf. Co n t a in e r s : 3-lb. cans (6 in * case). 62 r i e C DUP210011418 BIOCHEMICALS INDUSTRIAL AND BIOCHEMICALS DEPARTMENT NITROGEN PRODUCTS "Impedex" Sodium Propionate N.F.: White powder Ammonium Sulfate--(NH()aSO*: Light tan crystalline solid; guaranteed analysis not less than 21.0% nitrogen. Us e : In manufacture of mixed fertilizers. CONTAINERS: containing sodium propionate. Us e : For inhibition of heat ing and mold growth in feeds, and as an aid in the control and prevention of ketosis. CONTAINERS: 50-lb. bags. Shipments in car lots in bulk only from Belle, West Virginia. "Two-Sixty-Two" Feed Compound: Free-flowing, non f "NuGreen" Fertilizer Compound: Tiny round green pellets, much like buckshot in size and shape, specially caking granules; contains 42% urea-nitrogen equivalent to 262% crude protein (nitrogen x 6.25). Us e : As an ingredient treated to maintain free-flowing, non-caking characteristics; of feeds for ruminants (dairy cows, beef cattle, sheep). contains 45% urea-nitrogen. Us e : As a nitrogen fertilizer Recommended for use by commercial feed manufacturers for spray application to the foliage of plants or for soil only. Co n t a in e r s : 80-lb. bags. i application either direct or in mixed fertilizers. Co n t a in e r s : 80-lb. paper bags. MISCELLANEOUS "NuGreen" L-B Fertilizer Compound: Light tan granular solid specially treated to maintain relatively free-flowing, non-caking characteristics; contains 45% urea-nitrogen, less than 0.2% biuret. Us e ; As a low-biuret nitrogen fertilizer for spray application to citrus crops. Co n t a in e r s : 80-lb. paper bags. Diethylamine -- Technical -- (CaHs)2NH: For use in manufacture and formulation of pesticides. Co n t a in e r s : 5-, 55-gal. drums, tank cars. Dimethylamine--Anhydrous Technical--(CH3)aNH: For use by manufacturers in formulating weed killers and "Uramite" Fertilizer Compound: Odorless yellow granular solid containing nitrogen principally in the form other pesticides. Co n t a in e r s : 100-lb. cylinders, tank cars, tank trucks. of methylene ureas; remains free flowing under all con ditions; contains 38% nitrogen, only slightly soluble in water. Us e : As a direct application fertilizer for turf grasses and ornamental plants, or other crops requiring a long period of a continuous and uniform supply of nitrogen. 40% Dimethylamine Solution--(CHs)aNH: For use by manufacturers in formulating 2,4-D and 2,4,5-T weed killers and other pesticides. Co n t a in e r s : 50-gal. drums (nonretumable), tank cars, tank trucks. i Co n t a in e r s : 25- and 50-lb. paper bags. Emulsifying Agent A: An oil soluble composition de i "llramite" IVl Fertilizer Compound: Gray-white gran ular solid containing nitrogen principally in the form of signed for use in preparation of emulsifiable oil formu lations. Co n t a in e r s : 1-gal. cans, 5-gal. drums (nonreturn- methylene ureas; remains free flowing under all conditions; able). contains 38% nitrogen, only slightly soluble in water. Us e: As a high-quality, long-feeding nitrogen source in specialty mixed fertilizers. Co n t a in e r s : 80-lb. paper bags. Monomethyl a mine--Anhydrous Technical -- CHjNHa: For use in manufacture and formulation of "Uramon" Ammonia Liquors: Solutions of crude urea and ammonium sulfate in aqueous ammonia. . pesticides. Co n t a in e r s : 100-lb. cylinders, tank cars, tank trucks. Nitrogen Content Vapor Pressure (lb./sq. in., 70F.) 40% Monomethylamine Solution--CH3NH2: For use in manufacture and formulation of pesticides. Co n t a in e r s : 50-gal. drums (nonretumable), tank cars, tank trucks. UAL-B ........................... UAL-K ..................... UAL-37...................... UAL-S ...................... 45.5% 40.5% 37.0% 43.5% 22 1-0 2 20 Spreader-Sticker: An amber colored liquid containing a wetting and sticking agent. Us e : As a spreading and sticking agent for agricultural sprays. Co n t a in e r s : 1-pt. cans (16 in a case), 1-gal. cans (6 in a case), 5-gal. drums (nonretumable). (See also under Garden Products, Page 65.) UAL-37 also supplies water-insoluble organic nitrogen. Us e : In manufacture of fertilizers. CONTAINERS: Tank cars. NUTRITION AND THERAPY PRODUCTS Diphenylamine Refined Flake Industrial -- (C6Ht)jNH: A granular product for use in the preparation of screwworm remedies applied to livestock. Sold only to manufacturers for further compounding. Co n t a in e r s : 100-lb. bags. "Hydan" Feed Supplement: Methionine hydroxy ana logue calcium 90%. Us e : A source of methionine (an essential amino acid) for poultry, dog and livestock feeds. Co n t a in e r s : 50-lb. bags. GARDEN PRODUCTS (Small Package Items for the Home Gardener) Combination Insecticide-Fungicide Products: Floral Dust: Wettable powder for use as a dust or water spray. Us e: For insect and disease control on a wide variety of flowers and ornamentals including roses. Con trols many chewing and sucking insects, and is highly effective against plant diseases such as rose black spot, rusts, powdery mildew and certain leaf spot diseases. Co n t a in e r s : 8-oz. squeeze dusters, 1-lb. canisters, 3-lb. bags. 63 ? DUP210011419 ( INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS Fruit Tree Spray: Wettable powder designed especially for water spray application. Us e : For all sprays during the growing season on apples, peaches, cherries, pears,, plums, quince, strawberries, currants and gooseberries. Controls major insect pests and fungus diseases damaging home fruit plantings. Co n t a in e r s : 14-oz. canisters, 3-lb. Rose Insecticide & Fungicide: Wettabie powder for use as a dust or water spray. Us e : Designed especially for roses but effective on most other flowers; controls major fungus diseases of roses and kills a wide range of insect pests, including red spider mites. Co n t a in e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. Rose Spray-Duster: Pressurized sprayer that sprays both liquid insecticides and a dry fungicidal dust. Us e : For insect and disease control on roses. Co n t a in e r s : 12-oz. aerosol cans. Tomato Dust: Wettable powder for use as a dust or water spray. Us e: For control of insect pests and blights commonly attacking tomatoes in home gardens. Co n t a in e r s : 8-oz. squeeze dusters, 2-lb. bags. . Vegetable Garden Dust: Wettable powder for use as a dust or water spray. Us e : On all common vegetables. Controls a wide range of insect pests and is highly effective' against many fungus diseases, including both early and late blights of tomatoes and potatoes. Co n t a in e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. Fungicides: "Fermate" Ferbam Fungicide: Highly effective disease control agent, safe on a wide range of plants, for water spray application. Us e : For black spot and rust of roses, as well as many diseases of other flowers, vegetables, fruits, berries and tobacco. Co n t a in e r s : 9-oz. canisters, 2-lb. bags. "Manzate" Maneb Fungicide: Wettable powder (light in color) for the control of black spot on roses, blights and other diseases of tomatoes, as well as many fungus diseases of certain vegetables, fruits, and ornamentals. Co n t a in e r s : 5Jdr and 11-oz. jars. Insecticides: Aphid & Mite Spray: Emulsifiable insecticide containing 50% malathion. Us e : To control aphids, red spiders and many other insects on flowers, ornamentals, evergreens, fruits and vegetables. Co n t a in e r s : 1-fl. oz., 4-fl. oz., 1-pt. bottles. 6% Chlordane Dust: Insecticide for control of ants, Japanese beetle grubs, roaches, spiders, chiggers, and many other insect pests of the lawn, garden, soil, and household. Co n t a in e r s : 8-oz. squeeze dusters, 18-oz. canisters, 3-lb. bags. 72% Chlordane Insecticide: Emulsifiable insecticide for use as a liquid spray. Us e : Concentrated form of chlordane for insect control on lawns, flowers, shrubs, and ornamental plants, and as a residual spray around building foundations for the control of termites. CONTAINERS: 8- and 16-fl. oz. bottles. 64 50% DDT: Wettable powder insecticide for use as a water spray. Us e: Concentrated form of DDT for insect control on many garden and ornamental plants, on lawns, and as residual spray around buildings. CONTAINERS: 15-oz. canisters, 2-lb. bags. Dormant Spray Oil: A highly refined, emulsifiable oil for the control of overwintering forms of certain scales, mites and aphids. Us e : As a prefoliage spray on fruit trees, shade trees, ornamentals and evergreens. Co n t a in e r s : 1-qt. cans. Garden Insecticide: Emulsifiable insecticide containing 25% methoxychlor and 25% malathion. Us e : For the control of many insects on vegetables, fruits, flowers, ornamentals and evergreens. Also may be used to control flies, mosquitoes, roaches, ants, spiders, crickets, clover mite, and earwigs around dwellings, bams and other out buildings. Co n t ain e r s : 4-, 8-, 16-, 32-oz. bottles, 3^-gal. jugs. 50% Technical Methoxychlor; Wettable powder in secticide for use as a water spray. Has very low order of toxicity to humans; may be used close to harvest time. Us e : For insect control on garden and ornamental plants; also highly effective as residual spray around buildings. Co n t a in e r s : 12-oz. canisters, 2-lb. bags. Planf Food: Ferro FTE (Fritted Trace Elements): Essential trace elements in a new slowly soluble form. Us e : Soil mineralizer for gardens, lawns and potted plants; also for commercial crop use. Co n t a in e r s ; 1-lb. canisters, 5-lb. bags. Soluble Plant Food: High strength (19-22-16) fast-acting plant food for gardens, lawns and house plants. Readily soluble in water; feeds through leaves or roots. Us e : As a foliage spray, transplanting solution, root feeding, grass feeding. Co n t a in e r s : 1-lb. bag, 4-lb. bags, 50-lb. bags. Repellents: Insect Repellent Lotion: Active ingredient--N,N-diethyl-meta-toluamide. Us e: Repels many biting insects such as mosquitoes, chiggers, biting flies, ticks and gnats. For application to skin and clothing. Co n t a in e r : lj^-fi. oz. bottles. Insect Repellent Sprayer: Active ingredient--N,Ndiethyl-meta-toluamide. Pressurized sprayer particularly useful for application to clothing. Us e : For repelling many biting insects including chiggers and ticks where appli cation to outer garments is necessary. CONTAINER: 5-oz. aerosol can. Seed Disinfectants: The following are offered in small packages by Garden Products Section. "Arasan" 75 Thiram Seed Disinfectant: (See Page 61). New Improved "Ceresan" Seed Disinfectant: (See Page 62). "Semesan" Seed Disinfectant: (See Page 62). "Semesan Bel" Seed Disinfectant: (See Page 62). "Tersan" 75 Turf Fungicide: (See Page 62). B1 i !W ii lit rr. gr ; d: br C C es gr 1, Cr na ac It 1- DUP210011420 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS Weed and Brush Killers: One quart size treats 21,000 sq. ft., about acre. Us e : For killing most broad leaf lawn weeds and many woody i "Animate" Weed and Brush Killer: A yellow, crystal plants. Co n t a in e r s : 16-oz., 1-qt. and J^-gal. cans. ; line, water soluble solid containing 80% ammonium sulfa* mate. Us e : For the non-selective kill of undesirable plant growth; the outstanding control for poison ivy, poison oak, Spray Adjuvant: poison sumac. Very useful in eradicating vegetation in driveways, walks, tennis courts, etc. Effective for killing brush and certain trees; prevents sprouting of tree stumps. Co n t a in e r s : 2-lb. and 6-lb. bags. Spreader-Sticker: A liquid wetting and sticking agent for use in insecticide, fungicide and weed-killing sprays. Co n t a in e r s : 1-fl. oz. cans. Chickweed Killer: A selective weed killer for use on Miscellaneous: ; established lawns. Controls chickweed at any stage of growth. Contains neburon herbicide. 4-oz. package treats Tree Wound Dressing: Pressurized sprayer. Us e: For : 1,000 sq. ft. Co n t ain e r s : 4-oz., 8-o z. canister. treatment of pruning, grafting, or other wounds of shade trees, fruit trees, ornamentals, roses, and other woody ; Crabgrass Killer: Contains AMA (amine methyl arse plants. Sets quickly, forming a protective seal. Co n t a in nates), a new highly effective crabgrass control. Rapid e r s : 12-oz. aerosol cans. acting and effective against seedling or mature crabgrass. 16-oz. covers up to 2,000 sq. ft. CONTAINERS: 16-oz., 32-oz., 1-gal. bottle. Sprayer: For attachment to garden hose. Sprayer features 3 interchangeable nozzles designed to handle all liquid and wettable powder garden chemicals. Has handy cut-off Lawn Weed Killer: Non-volatile 2,4-D amine selective knob and anti-siphon protection. weed killer for application as a water spray. Us e : For killing broad leaf lawn weeds such as dandelion and plantain; also effective against wild onion and certain woody plants such as Japanese honeysuckle and poison ivy. Co n t a in e r s : 8-fi. Garden Flip-Duster: Dispenses a fine cloud of dust with just a flip of the wrist. Covers foliage evenly and easily. oz. cans. Snail and Slug Pellets: Pellets absorb ground moisture Lawn Weed Killer No. 2: More concentrated formu expanding into an effective pest-attracting mound of bait lation of 2,4-D amine than above; particularly useful for to control snails and slugs. Co n t a in e r s : 1-lb., 2j^-lb., and those having larger-thah-average tuff areas fo~ maintain. 5-lb.'box. 65 DUP210011421 GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Atlanta 9, Georgia Charlotte 1, North Carolina Chicago 3, Illinois Clifton, New Jersey Palo Alto, California Philadelphia 3, Pennsylvania Rumford 16, Rhode Island PLANT: Deepwater, New Jersey 1261 Spring Street 427 West Fourth Street 7 South Dearborn Street 50 Page Road 701 Welch Road 1616 Walnut Street 50 North Broadway TELEPHONE PRospect 4-1000 TRinity 5-5391 FRanklin 5-5561 ANdover 3-7000 PRescott 3-5600 DAvenport 6-7550 Kingsley 5-1950 GEneva 4-6500 PRODUCTS This Division supplies to the consuming industries a complete line .of dyes, auxiliaries, textile finishes, surface active agents, wetting, dispersing, scouring and emulsifying agents. It also supplies organic chemical intermediates for the deodorant, disinfectant, dyes, explosives, fine chemicals, fireworks, insecticide, metal, petroleum, pharmaceutical, photographic, pigment, plastics, resins, rubber chemicals, soap, veterinary chemicals, and miscellaneous organic chemical industries. DYES Dyes are marketed in dry or wet form, depending on certain peculiarities or ultimate uses of the individual products. The dry dyes are generally finely divided pow ders, although there are colors marketed as small crystals, flakes or grains. The items sold in wet form vary in con sistency from, solutions to thick pastes. Our dyes are sold under specific trademarks, various groups or classes of colors being given a distinctive trademark, as follows: "Acetamine" Dyes: Designates a group of azo disperse dyes specifically developed for application to acetate and especially suited to the coloration of nylon. "Capracyl" Dyes: Represents a group of neutral-dyeing acid colors that produce the highest possible degree of light fastness on nylon. Also suitable for dyeing wool, particu larly in blends with cellulosic fibers. "Celanthrene" Dyes: Designates a group of anthraquinone disperse dyes designed especially for dyeing ace tate and also suitable for application to nylon. "Chromacyl" Dyes: Describes a group of dyes that con tain chromium in the dye molecule. Suitable for wool and nylon, these dyes are characterized by ease of application and good fastness. "Dekatyl" Dyes: Designates a line of cationic dyes espe cially suited for dyeing "Dacron" type 62 and 64 polyester fiber. "Diagen" Dyes: Designates a line of stabilized azoic colors that are used for printing cotton and rayon. They are tinctorially strong and have good fastness in full shades. "Halopont" Pigment Colors: Designates a line of pig ment colors. Used for tinting white paper. "Latyl" Dyes: A group of disperse dyes developed particu larly for coloration of "Dacron" polyester fiber, on which they have exceptionally good light- and wet-fastness proper ties. "Leucosol" Dyes: Designates a line of vat colors which have been specially prepared for textile printing. Character ized by excellent application and fastness properties. "Lithosol" Dyes and "LIthosol" Acids and Bases: Designates lines of dyes and chemicals specially prepared for the manufacture of lakes and organic pigments. "Lusane" Dyes (Brilliant Blue B): A special dye for cotton, with outstanding brilliancy of shade and light fastness'. "Luxol" Dyes: Designates a line of spirit- and lacquersoluble dyes. Used in lacquers, wood stains, stamp inks, ball point pen inks, etc. "Monastral" Pigments: Designates a type of insoluble pigments, producing extremely bright shades of blue and green with excellent fastness properties and high tinctorial strength. Used in the lake, wallpaper, paper, textile and other industries. 66 ot. DUP210011422 ORGANIC CHEMICALS DEPARTMENT d y e s a n d c h e mic a l s d iv is io n "Naphthanil" Dye Bases: Products used in combination "Suifanthrene" Dyes; Designates a line of thioindigoid te- with the various "Naphthanil" prepares to form insoluble vat dyes characterized by good fastness properties. Used ss azo dyes. Prior to coupling the bases must first be diazotized principally for the dyeing and printing of cotton, rayon to form the diazo salt. Widely used on cotton and rayon and silk. textiles. "Sulfogene" Dyes: Designates a line of sulfur colors; Oil Colors: Oil-soluble dyes used for a variety of purposes dyed from a solution of sodium sulfide. Used extensively on T in which the prime requirement is good solubility in oils, waxes and similar materials. cotton work-clothing fabrics and to a limited extent on rayon and other materials. Paper whites: Designates fluorescent white dyes espe cially designed for improving the whiteness or brilliance of white papers. DYEING AUXILIARIES "Ponsoi" Dyes: Designates a line of anthraquinone vat dyes. Used for the dyeing and printing of cotton and rayon, and characterized by excellent fastness properties. Under controlled conditions, they can be applied to wool. Also used to a limited extent on certain classes of paper. "Pontachrome" Dyes: Designates a line of colors for wool and nylon. Dyed by forming chromium lakes on the fiber. Used largely on materials such as men's suitings and overcoatings. "Pontacyl" Dyes: Designates a line of acid colors for wool, nylon, silk, and "Orion" acrylic fiber. Dyed in an arid bath. Produce bright shades and are used largely on materials for women's wear, bathing suits, sweater yams, upholstery fabrics,. etc. "Pontamine" Diazo Dyes: Direct dyeing colors. After dyeing, they are diazotized and developed with various "Pontamine" developers, with resultant improvement in fastness, particularly fastness to washing. Used extensively on cellulosic fabrics which are to be printed subsequently with discharge patterns. "Acetamine" Developer--AD Extra: Designates a product used as a developing agent in the application of the diazo type dyes, principally blacks, to acetate fiber. "Alkanol" LN Surface Active Agent: Clear light yellow liquid. Us e : To minimize barre problem when add dyes are applied to nylon filament fabrics. Anti-Fume S Solution: A product in solution form for use as durable protective agent against atmospheric fading of dyed acetate. Beta Naphthol: Designates a developing agent used in the dyeing of diazo or developed colors. Hydrosuifitc Concentrated (Sodium Hydrosulfite): White free flowing powder; hygroscopic; readily soluble in water. This product is used as a reducing agent in the dyeing of vat colors and also for the removal of color from previously dyed materials. "Latyl" Carrier A: White powder. Us e: To increase the dyeability of "Dacron" polyester fiber. "Pontamine" Dyes: Designates a line of colors dyed directly in a water bath containing a salt. Used extensively in the textile industry for dyeing cotton and rayon; also applied on paper and leather. "Pontamine'' Fast Dyes: Direct dyeing colors of excep tionally good fastness to light. "Pontamine" Whites: Designates fluorescent whitening agents that produce brilliant optical bleaches having out standing wetfastness properties when applied to cotton and rayon. Also used in soaps, detergents, etc. "Naphthanil" Azoic Compounds: Designates a line of azoic compounds used on cotton and rayon as a prepare prior to combining with the various "Naphthanil" dye bases and diazo colors to form insoluble dyes (See this page). Also combined directly with the diazotized bases to produce organic pigments for the lake and finishes industry. "Pontamine" Developers TN, ZN and MPD: Desig nates products used as developing agents in the application of the diazo types of dyes. Used generally on textile fibers other than wool and acetate. "Roraeyl" Dyes: Represents a group of soluble dyes that have good affinity and fastness properties on "Orion" acrylic fiber. They are used with selected arid dyes in many instances. "Rotalin" Dyes: Designates a line of spirit-soluble print ing colors. Used principally in the printing of glassine and other types of paper and cellophane. SURFACE ACTIVE AGENTS (Wetting, Dispersing, Scouring and Emulsifying Agents) "Alkanol" B Surface Active Agent: Light creamcolored powder. Us e : As a wetting and dispersing agent, particularly with dyes, and as a surface tension reducing agent in the paper, leather, pigment and metal processing industries. "Sevron" Dyes: Designates a line of cationic dyes espe "Alkanol" Crude Solution Surface Active Agent-- cially suited for dyeing "Orion" acrylic fiber, having out Alkylnaphthaiene Sodium Sulfonate: Clear light yel standing fastness properties on this fiber. low liquid. Us e : As a wetting and dispersing agent. f i DUP210011423 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Alkanol" DW Solution Surface Active Agent: Clear light yellow liquid. Us e: A detergent with wetting and dispersing qualities for general use; resistant to hard water, acids and alkalies. "Alkanol" S Flakes Surface Active Agent: Light creamcolored powder. Us e : As a dispersing and solubilizing agent. "Alkanol" WXN Surface Active Agent: Clear light yellow liquid. Us e : As a wetting agent with rewetting properties. "Alkanol" 189-S Surface Active Agent--Saturated Hydrocarbon Sodium Sulfonate: Light yellow liquid. Us e : As a wetting and penetrating agent; retains its activity in hard water, acid and alkaline solutions. "Duponol" 80 Surface Active Agent: Sodium salt of technical octyl alcohol sulfate. Light yellow liquid. Us e : As a wetting and penetrating agent particularly effective in the presence of high concentrations of electrolytes. "Duponol" C Sodium Lauryl Sulfate U. S. P.: White powder. Meets requirements of U. S. P. XIV for sodium lauryl_ sulfate. Us e : As emulsifying and.dispersing, agent for cosmetic, dental and medical preparations. '`Duponol" D Paste Surface Active Agent: Sodium salt of unsaturated long chain alcohol sulfate. Yellow paste. Us e: Powerful scouring, emulsifying, dispersing and wet ting agent and detergent. "Duponol" EP Surface Active Agent: Alkylolamine salt of saturated long chain alcohol sulfate. Light yellow viscous liquid. Us e : As a detergent, wetting, dispersing and emulsifying agent having excellent solubility, color stability and foaming properties, particularly suitable for shampoos. "Duponol" G Surface Active Agent: Amine salt of saturated long chain alcohol sulfate. Oil-soluble light yellow paste. Us e : Powerful emulsifying agent for oils and solvents. "Duponol" L-144-WDG Surface Active Agent: Sodium salt of a modified unsaturated long chain alcohol sulfate. Reddish-brown liquid. Us e : Emulsifying in dry cleaning and fungicidal sprays. "Duponol" LS Paste Surface Active Agent: Sodium salt of unsaturated long chain alcohol sulfate. Light yellow fluid paste. Us e : Scouring and emulsifying agent in leather and textile industries. "Duponol" ME Dry Surface Active Agent--Powder: Sodium salt of technical lauryl alcohol sulfate containing minimum electrolyte. White powder. Us e : As emulsifying and dispersing agent in metal cleaning, electroplating, textile and leather processing. "Duponol" OS Surface Active Agent: "Duponol" G plus long chain unsaturated alcohol. Clear yellow oilsoluble liquid. Us e : Very effective emulsifying agent for preparing oil-in-water emulsions. 68 "Duponol" QC Sodium Salt of Technical Lauryl Alcohol Sulfate--Fluid Liquid: Carefully controlled and standardized to provide a raw material for shampoos which allows manufacture from a single product of types which vary from clear liquids to pastes. "Duponol" SN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. Clear light yellow liquid. Us e: As a detergent, wetting, dispersing and emulsi fying agent with exceptionally high foaming power de signed for use in shampoos and hand cleaners. "Duponol" ST Surface Active Agent: Alkylolamine salt of saturated long chain alcohol sulfate. Light yellow liquid. Us e: Preparation of liquid shampoos. "Duponol" WA Dry Surface Active Agent--Flakes: Sodium salt of technical lauryl alcohol sulfate. Light yellow flakes. Dry form of "Duponol" WA Paste. "Duponol" WA Paste Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. Viscous white paste. Us e : As a detergent, wetting, dispersing and emulsifying agent in cosmetics, metal, leather, building materials, paper, pigment and cleaning compound industries, and in shampoos. "DuponoL" WAQ- Surface. Active Agent: Sodium salt of technical lauryl alcohol sulfate. Fluid white paste. Us e: More fluid form of "Duponol" WA Paste designed pri marily for shampoos. "Duponol" WAQE Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. Fluid liquid. Us e : Carefully controlled and standardized for use as emulsify ing agent in emulsion polymerization industry. "Duponol" WAT Surface Active Agent: Alkylolamine salt of long chain alcohol sulfate. Clear yellow viscous liquid. Us e: As a detergent, wetting, dispersing and emulsifying agent of high solubility and good foaming, particularly suitable for shampoos. "Duponol" WS Surface Active Agent: "Duponol" G plus long chain saturated alcohol. Light cream-colored waxy solid. Us e : A wax-soluble emulsifying agent for preparing water-in-oil emulsions. "Duponol" XL Surface Active Agent: Modified long chain alcohol sulfate. Clear light yellow colored liquid. Us e: Shampoo base for high quality clear liquid shampoos. ii "Petrowet" R Surface Active Agent: Light yellow liquid. A wetting and penetrating agent effective in high concentrations of electrolytes and especially for use in 15% hydrochloric acid for oil-well acidizing. "Petrowet" WN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. Light yellow liquid. Us e : For wetting and penetrating in acid solution. "Zonyl" S-13 Fluorochemical Surfactant: Free acid of fluoroalkyl phosphate. Brown waxy solid. Us e: Chemi cally stable surface active agent. TEXTILE SPECIALTIES "Alkanol" HC Surface Active Agent: Nonionic waxy solid. Us e: As a detergent, dispersing and emulsifying agent. -3 % P a. P h li tr ii A ur le fo DUP210011424 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Alkanol" HCS Surface Active Agent: Nonionic fluid paste. Us e : As a detergent, dispersing and emulsifying agent. Pitch dispersing agent and penetrant in paper pulp production. "Alkanol" HGN Textile Processing Agent: Saturated hydrocarbon sulfonate composition. Clear light yellow liquid. Us e : As a wetting agent for conditioning" and wet twisting of yam. Possesses limited fungicidal properties. "Alkanol" WXN Surface Active Agent: (See Surface Active Agents, Page 68.) "Aridex" L Concentrated Renewable Water Repel lent: Stable white dispersion. Us e : As a water repellent for textiles. "Aridex" WP Renewable Water Repellent: Stable white dispersion possessing maximum exhausting proper ties on textiles. "Avitex" AD Surface Active Agent: Clear reddishbrown liquid. Us e : As a penetrating agent for textile dyeing and finishing. "Avitex" C Softener: Light cream-colored paste. Us e : As a textile softening and finishing agent primarily for use on. cotton; and as paper coating plasticizer. "Avitex" FB Antistatic Developer: Light yellow to brown translucent gel. Us e : As an exhausting agent for "Zelec" DX durable antistatic agent. Produces a soft, dry, non-tacky finish having an excellent antistatic effect. "Avitex" K Durable Softener: Nonionic white paste. Us e : Softener and modifier for resin finishes in cellulosic fiber fabrics. "Avitex" NA Softener: Cationic fight tan paste. Us e : For softening and antistatic effects on all fibers. "Avitex" Q Softener: Cationic white paste. Us e : Soften ing cotton and synthetic fiber fabrics alone or with resins. "Avitex" R Softener: Cationic light tan paste. Us e : For softening and antistatic effects on all synthetic fibers. "Avitex" SF Softener: White paste. Us e : As a textile softening and finishing agent giving a less oily hand than "Avitex" C softener. Primarily for use on synthetics. "Avitex" W Softener: White paste. Us e: As a softening and finishing agent on synthetic textiles to obtain a waxy hand. "Avitone" A Softener: A saturated hydrocarbon sodium sulfonate composition resistant to oxidation, discoloration and rancidity. Light tan paste. Us e : As a leather finishing agent; softener in paper coatings; cotton finishing agent as a pure finish, or as a softener and plasticizer for starch and thermoplastic resins. "Avitone" AL Softener: Similar to "Avitone" A softener with added lubricity to improve sewability for cotton and synthetics. "Avitone" SR Softener: An anionic hydrocarbon sodium sulfonate type product. Light tan paste. Us e ; Softener for textiles particularly where absorbency is desired. "Avitone" T Softener: An anionic hydrocarbon sodium sulfonate type product. Semi-fluid paste. Us e: Softener for toweling and denims and pasting agent for disperse dyes. Results in highly absorbent finishes. "Duponol" D Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Duponol" LS Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Duponol" RA Surface Active Agent: Anionic liquid. Us e : Excellent scouring, emulsifying, dispersing and wetting agent. "Duponol" WA Dry Surface Active Agent--Powder: (See Surface Active Agents, Page 68.) "Duponol" WA Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Hydraphtal" Textile Processing Agent: Light yellow liquid combining solvent and scorning properties. Us e : For heavy duty degreasing of textiles and leather. "Merpentine" Surface Active Agent: Red-brown liquid with good wetting and solvent properties. Us e : As a wet ting and scouring agent in the yam dyeing and leather industries. "Merpol" B Surface Active Agent: Yellow liquid. Wetting, penetrating, leveling, dispersing and homoge nizing agent. Us e : As a kier boiling assistant in the textile industry. "Merpol" C Surface Active Agent: Clear yellow Kquid. Cleansing, dispersing, penetrating and emulsifying agent. Us e : As a solvent, penetrant, boiling off and dyeing assistant in the textile and leather industries. "Merpol" F Surface Active Agent: Clear amber liquid. Us e : As a dyeing assistant particularly for rawstock, beam and package dyeing. Low foaming. "Methacrol" Lubricant C: Light cream-colored cati onic acidic dispersion. Us e : As boarding lubricant for nylon hosiery. "Methacrol" Lubricant K: Light cream-colored cati onic- acidic dispersion. Us e : As boarding lubricant with softening properties for nylon hosiery. "Methacrol" FF Resin Dispersion: Light cream-colored acidic dispersion of thermoplastic resin. Us e : As a stiffen ing finish for cellulosic and hydrophobic fibers. 69 DUP210011425 "Methacrol" FNH Resin Dispersion: Light creamcolored acidic dispersion of thermoplastic resin substantive to all fibers. Us e : In finishing low denier nylon hose to impart body. "Methacrol" NH Resin Dispersion: Light cream-colored acidic dispersion of thermoplastic resin substantive to nylon fiber. Us e: In finishing nylon hose to impart snag resistance. "Nalan" RF Durable Water Repellent: Light creamcolored viscous paste dispersion. Us e : Along with thermo setting resins as a softener modifier to obtain improved crease resistance and wash-and-wear properties on cotton fabric. "Neomerpin" N Surface Active Agent--Aromatic Sulfonic Acid: Brown liquid. Us e : As a'wetting and penetrating agent for use in acid media by the textile and leather industries. "Ondal" A Oxidizing Agent: White powder. Us e: For one-bath oxidizing and soaping of vat colors in the textile industry. Product BCO Surface Active Agent--Cetyl Betaine:An ancipKdtericamber liquid showing cationicpropertiesin acidic solutions and anionic properties in alkaline solutions. Us e: As a wetting agent, detergent and dyeing assistant particu larly effective in alkaline peroxide bleaching processes and other operations employing high concentrations of acids or alkalies. Retarder LAN Surface Active Agent: Cationic amber liquid. Us e: In acid and electrolyte solutions; dye retarding and stripping agent primarily for use with azoic colors. "Shirlan" Extra Industrial Fungicide--Technical Salicylanilide: Light cream-colored powder. Us e: As a fungicide for general industrial use where low toxicity to humans is essential. "Shirlan" A Industrial Fungicide--Dispersed Sali cylanilide: Cream-colored aqueous dispersion of "Shirlan" Extra. Us e: For imparting mildew resistance to textiles. Particularly designed for use with "Aridex" water repellents. "Shirlan" D Industrial Fungicide--Dispersible Sali cylanilide: Cream-colored powder. Water dispersible form of "Shirlan" Extra. Us e: For imparting mildew resistance to yarn or fabric in sizing or finishing mix. "Sitol" Flakes Oxidizing Agent--Sodium Salt of Nitrobenzene Meta Sulfonic Acid: Cream-colored pow der. Us e : As a protective oxidizing agent in discharge printing. Spinning Lubricant L: Pale yellow liquid. Us e : As a textile spinning lubricant with antistatic properties. "Tetralin" Solvent--Tetrahydronaphthalene-- CioHu: Water-white liquid. Us e: In the textile, soap and manufactured gas industries, and as a chemical inter mediate. 70 "Zelan" AP Paste Durable Water Repellent: A long chain nitrogen complex. Tan paste. Us e : For mill appli cation, to impart to fabrics water, spot and stain resistance, retained after repeated laundering or dry cleaning. "Zelan" FF Durable Water Repellent: A long chain nitrogen complex. White paste. Us e : For mill application to impart water, spot and stain resistance to heavy pile fabrics, corduroys, etc., retained after repeated laundering or dry cleaning. "Zelec" DP Durable Antistatic Agent: Stable, fluid, milky dispersion. Us e: To reduce static electricity in synthetic fibers and fabrics, remaining effective through repeated launderings with soap. "Zelec" DX Durable Antistatic Agent: Light-colored translucent, viscous paste. Us e : To reduce static electricity in synthetic fibers and fabrics, remaining effective through repeated launderings with soap. "Zelec" NE Non-Durable Antistatic Agent: Ambercolored translucent, viscous paste. Us e : To reduce static electricity in processing synthetic fibers and fabrics. Finish is readily removed by laundering and has no effect on sub sequent finishing or dyeing operations. "Zelec" NK Non-Durable Antistatic Agent: Anionic composition of alcohol phosphates. Amber-colored trans lucent paste. Us e : To reduce static electricity in processing synthetic fibers and fabrics. Finish is readily removed by laundering and has no effect on subsequent finishing or dyeing operations. More oil soluble than "Zelec" NE. "Zeset" Fabric Stabilizer: A clear solution of a chem ical which will react with cellulosic materials. Us e : In finishing textiles and other fibers to impart crease resis tance, dimensional stability and hydrophobic characteristics. LEATHER SPECIALTIES "Duponol" LS Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Hydraphtal" Textile Processing Agent: (See Textile Specialties, Page 69.) "Merpentlne" Surface Active Agent: (See Textile Specialties, Page 69.) "Merpol" C Surface Active Agent: (See Textile Special ties, Page 69.) . "Methacrol" LB Resin Dispersion: Anionic alkaline dispersion of unplasticized thermoplastic resin. Light cream-colored liquid. Us e: As a base for seasoning to obtain a hard top finish for leather and leather articles. "Methacrol" LBM Resin Dispersion: Anionic alkaline dispersion of moderately plasticized thermoplastic resin. Light cream-colored liquid. Us e : As a base for seasoning to obtain a flexible finish for leather and leather articles. B DUP210011426 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Methacroi" LBP Resin Dispersion: Anionic alkaline dispersion, of highly plasticized thermoplastic resin. Light cream-colored liquid. Us e : As a base for seasoning to obtain a soft flexible finish for leather and leather articles. "Neomerpin" N Surface Active Agent--Aromatic Sulfonic Acid: (See Textile Specialties, Page 70.) "Zoron" Cfl Resin Finish: A clear solution of thermo setting resin. Us e : Synthetic tanning assistant to tighten leather grain. "Zoron" TR Polymer Emulsion: Anionic alkaline dis persion of unplasticized thermoplastic resin. Light creamcolored liquid. Us e : As a base for seasoning to obtain a glossy top finish for leather and leather articles. "Tetraiin" Solvent--Tetrahydronaphthalene-- CioHn: (See Textile Specialties, Page 70.) "Tyzor" Organic Titanates: A series of esters of ortho titanic add. Us e : As adhesion primers, binders for high temperature paints, pigment dispersants and moisture scavengers. "Vydax" Fluorocarbon Telomers: Chemically and thermally stable, insoluble, nonflammable, dry lubricants and release agents. "Zelcon" C Fabric Conditioner: Cationic fabric softener and conditioner, 100% active, viscous amber fluid. Us e: As the active ingredient in compounded home laundry fabric softeners and conditioners. MISCELLANEOUS SPECIALTIES "Aridex" DCN Renewable Water Repellent: White crystalline paste, soluble in petroleum solvent. Us e: As water repellent particularly after dry cleaning with petroleum solvent. "Decalin" Solvent--Decahydronaphthalene--C!0Hi8: Water-white liquid. Us e : As a solvent and as a chemical intermediate. "Duponol" L-142 Surface-Active Agent--Fatty-Al cohol Sodium Sulfate: Sodium salt of saturated long chain fatty alcohol sulfate. White powder. Us e: To impart emollient effects in cosmetic preparations. "Oceno!" Technical Oleyl Alcohol: Light yellow liquid. Us e : As a chemical intermediate. "Shirlan" Extra Industrial Fungicide--Technical Salicylaniiide: (See Textile Specialties, Page 70.) "Zonyl" E-7 Fluoroalkyl Ester: Fluoroalcohol pyromel- litate. Amber oil. Us e: Thermally stable fluid-lubricant and power fluid. ' "Zonyl" E-91 Fluoroalkyl Ester: Fluoroalcohol camphorate. Amber oil. Us e : Thermally stable liquid-lubricant and power fluid. MISCELLANEOUS PRODUCTS MBT (2-Mercaptobenzothiazole): Corrosion inhibitor. Powder form. Oil free. Sodium MBT 50% Solution: A 50% water solution of sodium mercaptobenzothiazole of high purity. Us e: Cor rosion inhibitor for anti-freeze. "Zepar" BP Reducing Agent: White free-flowing granu lar powder readily soluble in water. Us e : Bleaching agent for groundwood pulp. INTERMEDIATES* 5-Acetamido-8-amino-2-naphthalenesulfonic acid Technical 8-Acetamido-5-amino-2-naphthalenesulfonic acid Technical 8-Acetamido-2-naphthalenesulfonic acid, magnesium salt Technical p-Aminoacetanilide Technical 5-Amino-2-(p-aminoanilino)benzenesulfonic acid Technical 1- Aminoanthraquinone Technical ' 2- Aminoanthraquinone Technical N-(5-Amino-l-anthraquinonyI)anthranilic acid Technical N-(8-Amino-I-anthraquinonyl)anthranilic acid Technical 4-Aminoazobenzene-3,4'-disulfonic acid Technical 4-Aminoazobenzene hydrochloride Technical 4-Aminoazobenzene-4'-sulfonic acid Technical Aminoazotoluene Technical *The Intermediates in this list are presented alphabetically by the Du Pont sales names. It should be noted that these sales names are a mixture of the Chemical Abstracts system, the Geneva system and trivial names. There are no cross-references among these systems. DUP210011427 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION l-Ammo-4-benzamidoanthraquinone Technical l-Amino-5-benzamidoanthraquinone Technical 6-(p-(p-Aminobenzamido) benzamido) -l-naphthol-3-sulfonic acid Technical 6-(m-Aininobenzamido)-l-naphthol-3-suIfonic acid Technical 6-(p-Aminobenzamido)-l-naphthol-3-sulfonic acid Technical 5-Amino-2(3H)-benzimidazolone Technical p-Aminobenzoic acid Technical l-Amino-4-bromo~2-anthraquinonesulfonic acid, sodium salt Technical l-Amino-4-bromo~2-methylanthraquinone Technical l-Amino-2-bromo-4-p-toluidinoanthraquinone Technical l-Amino-5-chloroanthraquinone Technical 1- Amino-8~chloroanthraqumone Technical 2- Amino-l-chloroanthraquinone Technical 2-Amino-4-chlorophenol Technical 1-Amino-2,4-dibromoanthraquinone Technical 5- Amino-2-(2,3-dihydro-2-oxo-5-benzimidazolylamino)benzenesulfonic acid Technical p-Aminodiphenylamine Technical l-Amino-4-hydroxyanthraquinone Technical l-Amihb-4-metHbxyahtHraquinone Technical m-(4-Amino-3-methoxyphenylazo)benzenesulfonic acid Technical l-Amino-2-methoxy-4-(p-tolylsulfonamido) anthraquinone Technical l-Amino-2-methyIanthraquinone Technical l-Amino-2-methyi-4-p-toluidinoanthraquinone Technical l-Aminonaphth(2,3-c) acridine-5,8,14(13H)-trione Technical 4-Aminonaphth(2,3-c) acridine-5,8,14(13H)-trione Technical 6- Amino-l,3-naphthalenedisuifonic acid, disodium salt Technical 7- Amino-l,3-naphthalenedisulfonic acid, dipotassium salt Technical 4-Amino-l,6(and l,7)-naphthalenedisulfonic acid Technical 7-Amino-l,3,6-naphthaIenetrisulfonic acid* disodium salt Technical 4- Amino-l,3,5-naphthalenetrisulfonic acid, 4,5-sultam, trisodium salt Technical l-Amino-6-naphthol Technical 1-Amino-6(and 7)-naphthol Technical l-Ammo-7-naphthol Technical 1- Amino-2-naphthol-4-sulfonic acid Technical p-Aminophenol Technical * 2- Amino-1 -phenol-4-sulfonamide Technical 2-Amino-l-phenol-4-sulfonic acid Technical l-(m-AmLnophenyl)-3-methyl-5-pyrazolone hydrochloride Technical 1- (m-Aminophenyl) -5-oxo-2-pyrazoline-3-carboxylic acid Technical 2- Aminotoluene-5-sulfonic acid, sodium salt Technical 5- Amino-o-toluenesulfonic acid Technical 5-Amino-2-(p-toluidino)benzcnesulfonic acid Technical 4-(4-Amino-m-tolylazo)-m-toluenesulfonie acid Technical Aniline-2,5-disulfonic acid Technical l-Anilino-2-anthraquinonecarboxylic acid Technical l-Anilino-4-hydroxyanthraquinone Technical p-Anilinophenol Technical o-Anisidine Technical p-Anisidine Technical o-AnisidinomethanesuIfonic acid, sodium salt Technical Anthraflavic acid Technical Anthranilic acid Technical Anthra(l,9)pyrazol-6(2H)-one Technical 1,5-Anthraquinonedisulfonic acid, disodium salt Technical 72 DUP210011428 M Km I 1-8-Anthraquinonedisulfonic acid, disodium salt Technical 2,6-Anthraquinonedisulibnic acid, disodium salt Technical 1- Anthraquinonesulfonic acid, sodium salt Technical 2- Anthraquinonesulfonic acid, sodium salt Technical - NjN'-l^-Anthraquiaonyienedianthranilic acid Technical l,l'-(l,5-AnthraquinoayIenediimino)dinaphth(2,3-c)acridine-5,8,14(13H)-trione Technical (l-Anthraquinonyl)-l,2~bydrazmedisuIfonic acid, disodium salt Technical Anthrarufin Technical . 4',4'"-Azohis-4-biphenylcarboxylic acid, disodium salt Technical 4-(4-Benzamido-l-anthraquinonylamino)naphth(2,3-e)acridine-5,8,14(13H)-trione Technical l-Benzamido-4-chloroanthraquinone Technical l-Benzamido-5-chloroanthraquinone Technical Benzanilide Technical 7H-Benz(de) anthracen-7-one Technical 0- Benzoylbenzoic acid Technical (33'-Bi-7H-benz(de)anthracene)-7,7'-dione Technical (4,4'-Bi-7H-benz(de) anthracene) -7,7y-dione Technical (l,l'-Binaphthalene)-8,8'-dicarboxylic acid Technical 1.4- Bis(l-anthraquinonylamino) anthraquinone Technical 1.5- Bis(l-anthraquinonylamino)anthraqumone Technical 4,4'-Bis(diethylamino) benzophenone Technical 4,4'-Bis(dimethylamino)benzhydroI Technical 4,4'-Bis(dimethylamino)benzophenone Technical 1.5- Bis(2,4-dinitrophenoxy) -4,8-dinitroanthraqulnone Technical T,4-Bis(2^4j^-triethylanilin6)ahtfiraqTiihohe Technical 3- Bromo-7H-benz(de) anthracen-7-one Technical 1- Bromo-4-methylaminoanthraquinone Technical 2- Bromo-3-methylanthraquinone Technical 1- (9-Bromo-7-oxo-7H-l>eiiz(de)anthracen-3-ylamino)anthraquinone Technical o-(3-Bromo-p-toluoyl) benzoic acid Technical 2- Bromo-l,3,5-triethylbenzene Technical p-Butylaniline Technical 2-tert-BUtylanthraquinone Technical N,N/-Carbonylbis(4-methoxymetanilic acid), disodium salt Technical * Chicago Acid Technical . 4- Chloro-2-aminobenzoic acid Technical 2- Chloro-4-amino toluene Technical 4-Chloro-2-aminotoluene Technical 6-Chloro-2-aminotoluene Technical m-CMoroaniline Technical - 0- Chloroaniline Technical . p-Chloroanillne Technical Chloroanilines Mixed C Technical 3- Chloro-o-anisidine Technical 1- Chloroanthraquinone Technical 1- Chloro-2-anthraquinonecarboxylic acid Technical Chlorobenzene Technical 0- (p-Chlorobenzoyl)benzoic acid Technical 2- ChloroN,N-diethyl-4-nitroaniline Technical 3- ChIorodiphenylamine Technical 4- Chlorometanilic acid Technical 1- Chloro-2-methylanthraquinone Technical 2- Chloro-4-nxtroaniline Technical 4-Chloro-2-nitroaniline Technical C- DUP210011429 4-Chloro-2-nitroanisole Technical l-Chloro-5-nitroantkraquinone Technical 1- Chloro-8-uitroanthraquinone Technical 4-Chloro-3-nitrobenzenesulfonarmdc Technical 2- Chloro-5-nitrobenzencsulfonic acid, sodium salt Technical 4-Chloro-2-nitrophenol Technical 4-Chloro-2-nitrotolucnc Technical 4(and 6)-Chloro-2-nitrotoluene Technical 6-Chloro-2-nitrotoluenc Technical 4-Ghlorophthalic acid Technical 6-Chloroquinaldinc Technical 6-ChloroquinophthaIonc Technical 1- (2-Chloro-5-sulfophenyl)-3-methyl-5"pyrazolone Technical (4-ChIoro-o-tolylmercapto) acetic acid Technical 2- Chloro-p-xylene Technical Chrysazin Technical Cleve's Acid 1,6 Technical Qeve^s Acid 1,7 Technical Cleve's Acid Mixed Technical Copper phthalocyaninc Technical Copper phthalocyaninc, semichloro Technical Copper tetra(4)amiri6phthaloeyflnine Technical..................... Copper tetra(4)nitrophthalocyanine Technical Cresidine Technical 8-Cyano-l-naphthalencsulfonic acid, sodium salt Technical Dehydrothio-p-toluidine Technical Dehydrothio-p-toluidinesulfonic acid Technical 1.4- Diaminoanthraquinone Technical 1.5- Diaminoanthraquinone Technical' 2.6- Diaminoanthraquinone Technical 1,3 (and 1,8)-Diaminoanthraquinone Technical 4.8- Diaminoanthrarufin Technical 1.4- Diamino-2,3-dichloroanthraquinone Technical 1.4- Diamino-2,3-dihydroanthraqruinone Technical 3.6- Diamino-2,7-dimethylacridine Technical - 3,6-Diamino-2,7-dimethylacridine sulfate Technical 4,4'-Diamino-2,2'-stilbcnedisulfonic acid Technical o-Dianisidine Technical 1.5- Dibenzamidoanthraquinone Technical 4,5'-Dibenzamido-l,l '-iminodianthraquinone Technical N,N-Dibenzylaniline Technical 3.9- Dibromo-7H-benz(de)anthracen-7-one Technical Dibromo-8,l6-pyranthrenedione Technical 2.5- Dichloroaniline Technical 3.4- DichIoroaniline Technical 2.5- Dichloroaniline-4-sulfonife acid Technical 1.5- Dichloroanthraquinone Technical 1,8-DichIoroanthraquinone Technical l,5(and 1,8)-Dichloroanthraquinone Technical 2.6- Dichlorobenzal chloride Technical N,N'-(2,5-Dichloro-3,6-dioxo-p-phenyIene)bis(6-(2(3H) -oxo-5-benzimidazoIyIamimo)rnet*nltt* 4 2.5- Dichloro-4-(3-methyI-5-oxo-2-pyrazolin-l-yl)benzenesulfonic acid Technical 2.6- Dichloro-4-nitroaniline Technical l,4-Dichloro-2-nitrobenzene Technical DUP210011430 3.4-Dichloronitrobenzene Technical 2.6-Dichlorotoluene Technical 2-Diethylaminoethyl methacrylate MS Technical N,N-Diethyl-m-ammophenol Technical rV,N-Diethylaniline Technical IS^N-Diethylcyclohexylamine Technical N,N-Diethylmetanilic acid, sodium salt Technical N,N-Diethyl-l-naphthylamine Technical N,N-Diethyl-m-toIuidme Technical 2.3-Dihydro-l,4-bis(methylamino)anthraquinone Technical 2.3-Dihydroquinizarin Technical Dihydroxyviolan throne Technical 1.3-Dimethoxybenzene Technical N,N-Dimethylaniline Technical 2,2'-Dimethyl-l,l'-bianthraquinone Technical N,N-Dimethyl-m-toIuidine Technical m-Dinitrobenzene 89 Technical IHnitro-(3,3'-bi-7H-benz(de)anthracene) -7,7#-dione Technical 3.5-Dinitrobenzoic acid Technical 2.4-Dinitrochlorobenzene Technical Dinitrochrysazin Technical 4.5-Dmitro-2,7-chrysazindisulfonic acid, disodium salt Technical 2.4-Dinitro-4'-hydroxydiphenylamine Technical 2^4-Dinitrophenoi Technical 4,4'-Dinitro-2,2'-stilbenedisulfonic acid, disodium salt Technical 2.4-Dinitrotoluene Technical Dinitrotoluene Mixture Technical 1.4- Di-p-toluidinoanthraquinone Technical r- Di-o-tolylguanidine Technical Di-o-tolyl thiourea Technical 6-Ethoxy-2-mercaptobenzothiazole Technical 2-Ethoxy-l-naphthyIamine Technical 2- Ethoxy-l-nitronaphthalene Technical 3- Ethylamino-p-cresol Technical 3-Ethylamino-p-toluenesulfomc acid Technical N-Ethylaniline Technical aIpha-(N-Ethylanilino)-m-toluenesulfonic acid Technical N-Ethyl-N-benzylaniline Technical N-Ethyl-N-benzyl-m-toluidine Technical N-Ethyl-alpha-naphthylamine Technical IN-Ethyl-m-toluidine Technical N-Ethyl-o-toluidine Technical alpha-(N-Ethyl-m-toiuidino)-m-toIuenesuIfonic acid Technical F Salt Technical Fluoroalcohols Fluorocarbons Formanilide Technical Formaniline Technical 0- Formotoluidide Technical G Salt Technical Gamma Acid Technical H Acid Technical Homophthalicacid Technical 1- Hydroxy-4-(aipha-hydroxy-m-'toluidino)anthraqumone Technical DUP210011431 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DiVISfON N-(7-Hydroxy-l-naphlhyl)aectaniid<` Technical l-lIydroxy-4-p-loIuidinoanthraquinone Technical 1,1 -Iminol>is(4-aniinoanthraquinonc) Technical l^l'-IminobisC-i-benzamidoanthraquinone) Technical l,l/-Iminol>is(5-be.nzamicloanlhraquinonc) Technical l,l'-Iminobis(4-nitroanthraquinone) Technical l*l'-tminodianlhraquinonc Technical 1,3-Isoquinolinediol Technical Isoviolanthronc Technical J Acid Technical J Acid Urea Technical Koch Acid Technical Laurent's Acid Technical . 1-Methoxyanthraquinone Technical l-Methoxy-4-nitroanthraquinone Technical 1-Methylaminoanthraquinone Technical N-Methylanilinc Technical 3-(N-Mcthylanilino)propionitrilc Technical 1-(3-Mcthy]-2-anthraquinonylaniino)-5-(7-oxo-7H-benz(de)anthracen-3-ylamino)anthraquinone Technical N-Metliylcyclohcxvlaminc Technical Methylcnebis(2-chloroaniline) Technical p,p'-Methylcncbis(N,N-dimethylaniline) Technical N-Methvlgl u camine Technical 4-Metiiyh-2"nitroanisole Technical 2-Methyl-l-nitroanthraquinone Technical 2,7-Naphthalcncdi$ulfomc acid, disodium salt Technical o-Naphthionic acid Technical alpha-Naplithol Technical Naphthostyril Technical alpha-Naplithylamine Technical (2-NaphthyImercapto) acetic acid Technical Nevile & Winthcr's Acid Technical 2'-Nitro-p-acctanisididc Technical 3-Nitro-l-atninoanisole Technical 5-Nitro-2-aminoanisolc Technical 4- Nitro-2-aminophenoI Technical 4- Nitro-2-aminotol lien,e Technical 5-Nitro-2-aminotoluene Technical m-Nitroanilinc Technical 4- Nitroaniline-2-sulfonic acid Technical 0- Nitroanisole Technical p-Nitroanisole Technical 1- Nitro-2-anthraquinonecarboxylic acid Technical m-Nitrobenzaldchyde Technical 6- (p-Cp-NTitrobenzamido)bcnzamido)-l-naphthol-3-sulfonic acid Technical 6-(p-Nitrobenzamido)-l-naphthol-3-sulfomc acid Technical 5- Nitro-2(3H) -benzimidazolone Technical p-Nitrobenzoic acid Technical 4 -Nitro-4-biphenylcarboxylic acid, sodium salt Technical o-Nitroehlorobenzene Technical p-Nitrochlorobenzene Technical 2- Nitro-p-crcsol Technical m-Nitroformanilide Technical ` alpha-Nitronaphthalene Technical DUP210011432 DYES AND CHEMICALS DIVISION ORGANIC CHEMICALS DEPARTMENT 7(and 8)-Nitronaphth(l,2)-oxadiazole-5-sulfonic acid Technical p-Nitrooxanilic acid Technical p-Nitroplienetole Technical 0-Nitrophenol Technical p-Nitrophenol Technical 4-Nitro-o~phenylenediamine Technical 1-(m-Nitrophenyl) -3-methyI-5-pyrazoIone Technical l-(m-Nitrophenyl)-5-Oxo-2-pyrazolme-3-carboxylic acid Technical 4-Nitrophthalimide Technical p-Nitrosodium phenolate Technical p-Nitrosophenol Technical m-Nitrotoluene Technical 0-Nitrotoluene Technical p-Nitrotoluene Technical Nitrotolucnes Mixed o-m-p Technical 4-jVitrotoluene-2-sulfbmc acid Technical N-Oxalyl-m-phenylenediamine Technical N-Oxalyl-p-phenylenediamine Technical 6-Oxo-6H-anthr(9,l)isothiazole-3-carboxylic acid Technical 1-(7-Oxo-7H-benz(de)anthracen-3-yIamino)anthraquinone Technical l,r-(7-Oxo-7H-benz(de)anthracen-3,9-ylenediimino)dianthraquinone Technical Pentachlorobenzenethioi Technical Peri Acid Technical - p-Phenetidine- Technical- m-Phenylenediamine Technical - - - -................................................................- - - 1.3-Phenylenediamine-4-sulfonic acid Technical N-Phenyl Gamma Acid Technical N-Phenylglycine, potassium(and sodium) salt Technical 2,2'<-Phexiyliminodiethanol Technical N-Phenyl J Acid Technical l-Phenyl-3-methyl-5-pyrazolone Technical N-Phenyl-alpha-naphthylamine Technical N-Phenyl-beta-naphthylamine Technical N-Phenyl Peri Acid Technical Phthalimide Technical Picric acid NF | Picric acid Technical Piperidine Technical Primuline Fusion Mass 220 Technical ) Primuline Fusion Mass 240 Technical I Primuline Fusion Mass 270 Technical \ Quinaldine Technical Quinizarin Technical 2.4-Quinolinediol Technical Quinophthalone Technical 2R Acid Technical Rhoduline Acid Technical Sarcosine Technical Sodium metanilate Technical Sodium naphthionate Technical Sodium picramate Technical 07(p-SulfobenzoyI)benzoic acid* disodium salt Technical l-(p-Sulfophenyl)-3-methyl-5-pyrazolone Technical Sulfur tetrafluoride Technical DUP210011433 ry { ORGANIC CHEMICALS DEPARTMENT Tetrabutyl titanate Technical 1.4.5.8-Tctrachloroanthraquinone Technical Tetraethylthiuram disulfide Technical Tetraisopropyl titanate Technical 1.4.5.8-Tetrakis(l-anthraquinonylamino)anth.raquinone Technical Tetrakis(2-ethylhexyl) titante Technical Tetrastearyl titanate Technical 3,3'-Thiodi(7H-benz(de)anthracen-7-one) Technical Thxo-beta-naphthol Technical o-Tolidine base Technical o-Tolidine hydrochloride Technical m-Toluidine Technical o-Toluidine Technical p-Toluidine Technical o-(p-Toluoyl)benzoic acid Technical 2,4-TolyIenediamine Technical . 2>4-TolyIencdiamme-5-sulfonic acid Technical 1.3.5-Triethvlbenzene Technical 1.3.3-Trimethyl A2,cc -indolineacetaldehyde Technical 1.3.3-Trimethyl-2-methyleneindoline Technical Vinyl fluoride MS Technical - - - - -----------Violanthrone-Technical j 2,4-Xylidine Technical 2.5-Xylidine Technical Xylidines Mixed o-m-p Technical i 78 DUP210011434 ANdover 3-7000 COrtlandt 7-3965 DAvenport 6-2840 East Chicago, Indiana Antioch, California PRODUCTS "Freon" fiuorinated hydrocarbon products are readily available for use in refrigeration and air conditioning equip ment as original and replacement charges; for aerosol pro pellent uses; for blowing agents; for solvents; and for miscellaneous uses. Those interested are requested to con tact our Wilmington or nearest district office for full in formation regarding the products' usage and nearest stocking points. "Freon" fiuorinated hydrocarbons are clear and water white; odors of vapors are mild and somewhat ethereal but 'disappear when- mixed-with-air; nonirritating- to the eyes, nose, throat, lungs and skin; nontoxic, nonflammable, non explosive, noncorrosive, stable and inert. "Freon-11" or "F-ll" Refrigerant, Propellent, Blow ing Agent and Solvent--Trichloromonofluoromethane--CCI3F: B. P. 74.8F. (23.8C.) at 760 mm. Us e : As a refrigerant in industrial and commercial air conditioning systems; also, in industrial process water and brine cooling to --40F. (--40C.) employing single or multistage centrif ugal type compressors of 100 tons refrigeration capacity and larger. As brine refrigerant in indirect low temperature systems to -- 150F. (--101.1C.). As blowing agent for rigid and resilient plastic foams. Solutions of "Freon-11" and "Freon-12" are used as propellents for a wide variety of aerosol products. Can be tailored to individual pressure requirements from 1 to 69 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 10-, 25- and 150-lb. cylinders; 100-, 200- and 650-lb. drums; 2,200-lb. tanks, tank trailers, tank cars. "Freon-12" or "F-12" Refrigerant, Propellent and Blowing Agent--Dichlorodifluoromethane--CCI2F2: B. P. --21.6F. (--29.8C.) at 760 mm. Us e: Asa refrig erant in both direct and indirect industrial, commercial, household and automotive air conditioning systems; also, in household refrigerators, ice cream cabinets, frozen food cabinets, food locker plants, water coolers, etc., employing reciprocating type compressors ranging in size from frac tional to 800 horsepower. "Freon-12" is also used in house hold refrigerating systems, ice cream and frozen food cab inets employing rotary vane type compressors. "Freon-12" is used in industrial process water and brine cooling to -- 110F. (--78.9C.) employing multistage centrifugal type compressors in cascade of 100 tons refrigeration capacity and larger. "Freon-12" is used as a propellent for high pressure aerosols such as those containing insecticides. Also for surface-coating products such as metallic and pigmented paints and lacquers. Solutions of "Freon-12" with other "Freon" products are used as aerosol propellents for a wide variety of products; also as low temperature solvents. As blowing agent for rigid and resilient plastic foams. Pr e s s u r e--70 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 10-, 25-, 50- and 145-lb. cylinders; 2,000-lb. tanks, tank trailers and tank cars. "Freon-13" or"F-13" Refrigerant--MonochlorotrlHuoromethane--CCIF3: B. P. -- 114.6F. (--81.4C.) at 760 mm. Us e : As a refrigerant in both direct and indirect industrial extremely low temperature cascade systems ranging in size from fractional to 100 horsepower, employ ing reciprocating or rotary compressors; aircraft environ mental test chambers; shrink fit, toughening and hardening of metals; pharmaceutical processing. PRESSURE--459 lb./ sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 5-, 9-, 23and 80-lb. cylinders. "Freon-13Bl" or "F-13B1" Refrigerant and "Freon" FE-1301 Fire Extinguishing Agent--Monobromotrifluoromethane--CBrF3: B. P. --72.0F. (--57.8C.) at 760 mm. Us e : As a refrigerant in both direct and indirect industrial low temperature cascade or multiple compres sion systems- ranging in size from fractional to 100 horse power, employing reciprocating or rotary compressors; aircraft environmental test chambers; shrink fit, toughen ing and hardening of metals; pharmaceutical processing. As a fire extinguishing agent. Pr e s s u r e--199 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 6-, 10-, 28- and 100-lb. cylinders and 2,000-lb. tanks. "Freon-14" or "F-14" Propellant and Refrigerant Gas--Tetrafluoromethane--CF4: B. P. --198.4F. (--128.0C.) at 760 mm. Cr it ic a l Te mp e r a t u r e : --49.9F. (--45.5C.). Cr it ic a l Pr e s s u r e : 542 lb./sq. in. absolute. Us e ; As a refrigerant in extremely low temperature cas cade systems for environmental testing, metal conditioning, pharmaceutical processing, freezing and storage of biologi cal products and other cryogenic applications; direct cool ant for infrared detector cells; an inert propellant gas to operate satellite guidance and stabilization rockets. Co n t a in e r s : 5-, 15- and 50-lb. net weight cylinders as a com pressed gas. DUP210011435 ORGANIC CHEMICALS DEPARTMENT "FREON" PRODUCTS DIVISION "Freon-22" or "F-22" Refrigerant, Plastics Inter mediate, Propellent and Solvent--Monochlorodifluoromethane--CHCIFS: B. P. --41.4F. (--40.8C.) at 760 mm. Us e : As a refrigerant in industrial and commercial low temperature refrigerating systems employing recipro cating type compressors; for low temperature refrigerating systems employing centrifugal type compressors. Solutions of "Freon-22" with "Freon-11" and "Freon-12" are used as propellents for aerosol products requiring special solvent and pressure qualities. Chemical intermediate for plastics manufacture. Used as a low temperature solvent in invest ment casting process for preparation of ceramic molds. Pr e s s u r e --Approximately 122 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 9-, 22-, 25-, 50- and 125-lb. cylinders and 1,750-lb. tanks, tank trailers and tank cars. "Freon-113" or "F-113" Refrigerant, Plastics Inter mediate, Solvent and Propellent--Trichlorotrifiuoroethane--CCbFCCIFi: B. P. 117.6F. (47.6C.) at 760 mm. Us e : As a refrigerant in industrial and commercial air conditioning systems; also, in industrial process water and brine cooling to 0F. (--17.8C.) employing four or more stage centrifugal type compressors of 25 tons refrigeration capacity and-larger. "Freon-113" is used with other "Freon" compounds as a propellent for aerosol products. As blowing agent for rigid and resilient plastic foams. As a chemical intermediate for plastics manufacture. Co n t a in e r s : 10-, 25- and 150-lb. cylinders; 100-, 150-, 200- and 690-lb. drums; and 2,200-lb. tanks, tank trailers and tank cars. "Freon-114" or "F-114" Propellent and Refrigerant-- Dichlorotetrafluoroethane--CCIFiCCIFs:B. P. 38.4F. (3.6C.) at 760 mm. Us e : As a refrigerant in fractional horsepower household refrigerating systems and drinking water coolers employing rotary vane type compressors; also, in indirect industrial and commercial air conditioning systems and in industrial process water and brine cooling to --70F. (--56.7C.) employing multistage centrifugal type compressors of 100 tons refrigeration capacity and larger. As high stability heat transfer medium. Solutions of "Freon-114" and "Freon-12" are used as propellents for aerosol products where active ingredients require extreme stability--cosmetics, for example. As blowing agent for rigid and resilient plastic foams. Provide pressure from 12 to 69 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 25- and 150-lb. cylinders and 2,200-lb. tanks, tank cars. "Freon" C-318 Propellent and Dielectric Gas--Octafluorocyclobutane--Cyclic (CF^: B.P. 21.1F. (--6.0C.) at 760 mm. Us e : Food grade as propellent for aerosol food products. Tasteless and odorless. Pr es s u r e : 25 psig. at 70F. (21.1C.). Mixture with nitrous oxide as propellent for whipped cream dessert topping, salad dressing and other pressurized food products. As propellent for flavoring extracts, spices and other food additives. As propellent for inhalation pharmaceutical products. Techni cal grade as dielectric coolant and heat transfer agent for transformers, cables, waveguides, and electronic devices, Dielectric strength 100 KV per inch at 760 mm. Service temperature at least 250C. Co n t a in e r s : 14-, 28-, and 165lb. cylinders and 2,200-lb. tanks. "Freon" BF Solvent--Tetrachlorodifluoroethane-- CCIsF-CCIsF: B. P. 199.0F. (92.78C.) at 760 mm. F. P. 79F. (26.11C.). Us e: As a solvent. Also, in mixtures with "Freon" MF and "Freon" TF to provide specific boiling points and properties. As a flash point retarder for hydro carbons and some higher boiling solvents. CONTAINERS: 10and 20-gallon nonretumable drums, tank trailers and tank cars. "Freon" MF Solvent--Trlchloromonofluoromethane --CCIF: B. P. 74.8F. (23.8C.) at 760 mm. F. P. --168F. (--111 C )- Us e : As a cleaner for hermetic motor compres sors, oxygen storage tanks, etc. In blends as a cleaner for motion picture and television film, lithographic plates, typewriters, etc. As a flash point retarder for flammable solvents. Also used as an inert, noncorrosive brine and low temperature heat transfer fluid such as in the cold treat ment of brazed stainless steels. CONTAINERS: 10-, 20- and 55-gallon nonretumable drums, tank trailers and tank cars. "Freon" TF Solvent--Trichlorotrifluoroethane-- CCUF-CCIFs: B. P. 117.6F. (47.6C.) at 760 mm. F. P. --31F. (--35C.). Us e : As a solvent; for a cold immersion cleaning, as a vapor degreasing solvent, for ultrasonic or combination ultrasonic-vapor degreasing cleaning. Used a* a cleaner for precision equipment such as gyroscopes, for mechanical and electrical controls, precision instruments and gauges, motors and generators, electrical and electronic equipment and assemblies, motion picture film, television and magnetic tapes, printed circuits, and as a flash point retarder in blends. Also,, used in extraction processes. Co n t ain e r s : 10-, 20- and 55-gallon nonretumable drums, tank trailers and tank cars. 1,1-DiHuoroethane--Ethylidene Fluoride--CHj CHF: B. P. --12.5F. (--24.8C.) at 760 mm. USE: As a re frigerant, aerosol propellent and chemical intermediate. Co n t a in e r s : 8-, 16- and 95-lb. cylinders and 1,300-lb. tanks and tank trailers. 80 DUP210011436 ORGANIC CHEMICALS DEPARTMENT 'rTfiHifr* * .'{if- s&- & 4? | f ? j I I PETROLEUM CHEMICALS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 SALES OFFICES: Chicago 3, Illinois Cleveland 15, Ohio Houston 2, Texas Los Angeles 17, California New York 20, New York Philadelphia 2, Pennsylvania Pittsburgh 22, Pennsylvania San Francisco 4, California Seattle 3, Washington Tulsa 19, Oklahoma PLANTS: Antioch, California Carneys Point, New Jersey 8 South Michigan Avenue Suite 1116 Midland Building, 101 Prospect Avenue 705 Bank of Commerce Building Suite 425, 612 South Flower Street Suite 550, 45 Rockefeller Plaza 3 Penn Center Plaza Room 751, 1 Gateway Center Room 626, 111 Sutter Street Room 215, 4003 Aurora Avenue 1811 South Baltimore Avenue RAndolph 6-8630 MAin 1-3422 CApitol 5-1151 MAdison 4-1354 COlumbus 5-2342 LOcust 8-3531 ATlantic 1-2933 EXbrook 2-1934 MElrose 2-6977 LUther 3-8581 SHIPPING POINTS: TETRAETHYL LEAD COMPOUNDS Amarillo, Texas (1) Antioch, California (3) Beaumont, Texas (2) Bellevue, Ohio (1) Carneys Point, New Jersey (3) - ChaisorirTexas (I) Chalmette, Louisiana (1) Corpus Christi, Texas (1) Cushing, Oklahoma (1) Cut Bank, Montana (1) East Chicago, Indiana (1) East St. Louis, Illinois (1) El Monte, California (2) . Femdale, Washington (2) Fort Worth, Texas (1) Guthrie, Oklahoma (1) Heavener, Oklahoma (1) Houston, Texas (1) Kansas City, Missouri (1) North Bend (Renova), Pennsylvania (1) Philadelphia, Pennsylvania (1) Rosemont, Minnesota (1) Roxana, Illinois (1) Salt Lake City, Utah (1) Texas City, Texas (1) Toledo, Ohio (1) Torrance, California (1) Westlake, Louisiana (1) Wilmington, Delaware (1) ADDITIVES Billings, Montana Carneys Point, New Jersey Chicago, Illinois La Porte, Texas Kansas City, Missouri: Los Angeles, California Mt. Vernon, Washington TETRAMETHYL LEAD COMPOUND "TETRAMIX" ANTIKNOCK COMPOUND Carneys Point, New Jersey (3) (1) Tank Cars (2) Tank Cars and Tank Trucks (3) Tank Cars, Tank Trucks, and Drums PRODUCTS DIHF Antistail Additive--Dimethyl Formamide Tech nical--HCONi'CHi)*.: Colorless liquid, readily soluble in gasoline. Us e : In concentrations up to 0.1% to prevent engine stalling during cool humid weather conditions. Co n t a in e r s : 5-, 55-gal. drums, tank trucks, tank cars. Fuel Oil Additive No. 2: A viscous, light amber, ashless liquid. Miscible in No. 2 fuel oil in all proportions. Sp. Gr. 0.90. Us e : At concentrations of 0.003 to 0.02% by weight in household heating and diesel oils to decrease the rate of insoluble residue formation by its antioxidant effect and to reduce filter clogging by its dispersant action. It also has rust preventive properties. Co n t a in e r s : 55-gal. (375-lb.) steel drums. Fuel Oil Additive No. 7: A viscous, iight amber, ashless liquid. Miscible in No. 2 fuel oil in all proportions. Sp. Gr. 0.86. Us e: At concentrations of 0.003 to 0.02% by weight in household heating and diesel oils to decrease the rate of insoluble residue formation by its stabilizing effect and to reduce filter clogging by its dispersant action. Co n t a in e r s : 55-gal. (375-lb.) steel drums. Fuel Oil Additive No. 208: A mixture of Fuel Oil Additive No. 2 (92 parts) and Metal Deactivator (8 parts). Us e : Same as Fuel Oil Additive No. 2. Co n t a in e r s : 55-gal. (375-lb.) steel drums. 81 , i ORGANIC CHEMICALS DEPARTMENT Fuel Oil Additive No. 212: A mixture of Fuel Oil Additive No. 2 (88 parts) and Metal Deactivator (12 parts). Us e : Same as Fuel Oil Additive No. 2. Co n t a in e r s : 55-gal. (375-lb.) steel drums. Gasoline Antioxidant No. 5: A solution of N-n-butyl-paminophenol in alcohols having the following weight composition: 50% N-n-butyl-p-aminophenol HOCsHiNHC*!!# 30% Anhydrous isopropanol (CH3)sCHOH 20% Anhydrous methanol CHsOH The solution is readily soluble in gasoline in normal use concentrations. The use of benzene or other aromatic solvent is recommended for preparation of concentrated solutions. Sp. Gr. 0.90. Us e : For reducing the formation of gum and precipitation of lead in gasoline. Concentra tion required 0.002 to 0.01% by weight. Co n t a in e r s : 55-gal. (400-lb.) steel drums. Gasoline Antioxidant No. 22: N,N'-Di(sec.-butyl)-pphenylenediammeJCaHt[NHCH(CHs)(CiH3)]i] containing no solvent. A mobile liquid readily soluble in gasoline in all proportions and at all operating temperatures; Sp. Gr. 0.94. Us e : For retarding the formation of gum and precipi tation of lead in gasoline. Concentration required 0.001 to 0.005% by weight. Co n t a in e r s : 55-gal. (425-lb.) steel drums. Antioxidant No. 29--2,6-Di-tertiary butyl-4-methyl phenol--CH3CeH2[C(CHs)s]20H: A light colored, finely divided solid; non-coloring and readily soluble in oils; Sp. Gr. 1.04. Us e : In turbine, transformer and hydraulic oils, waxes and greases to retard oxidation and in gasoline to reduce the formation of gum and precipitation of lead. Concentration required 0.003 to 0,015% by weight. Co n t a in e r s : 100-lb. fiber drums. Petroleum Dyes: Hydrocarbon soluble dyes for impart ing distinctive colors to gasoline and other petroleum products. Co n t a in e r s : X00-lb. fiber drums. Oil Blue A --Essentially 1,4-Di(isopropylamino)anthraquinone Oil Bronze --A blend of Oil Red and Oil Orange Oil Orange --Essentially Phenylazo-2-naphthol Oil Red --Essentially Methyl derivatives of azobenzene-4-azo-2-naphthol Oil Yellow N--Essentially p-Dimethylaminoazobenzene Lube Oil Additive 564: Solution of methacrylate poly mers containing basic nitrogen in light neutral oil. Den sity 7.5 lb. per gal. Us e : To provide detergency for motor oils, particularly under low-temperature, low-power, stopand-go driving conditions, and to improve viscosity index. Concentration required averages 2% and varies somewhat with the properties of the base oil and supple mentary additives used. Co n t a in e r s : 55-gal. (375-lb. net) drums and 4,000-, 6,000- and 8,000-gal. tank cars. 82 PETROLEUM CHEMICALS DIVISION Metal Deactivator: A 78% solution of active in gredient in an aromatic solvent. The active ingre dient is principally N,N'-disalicvlidene-l ,2-propanediamine [HOC6H4CHNCH2CH(CH3)NCHC,HtOH]. Normally a dark amber liquid; may crystallize during prolonged stor age. Readily soluble in gasolines and other hydrocarbon oils above 25C. Miscible with Gasoline Antioxidants and Fuel Oil Additive No. 2. Sp. Gr. 1.08. Us e : For improving storage and color stability of petroleum distillates contain ing dissolved copper. It is particularly useful as an adjunct to Gasoline Antioxidants and Fuel Oil Additive No. 2. Concentration required 0.0002 to 0.002% by weight. Co n t a in e r s : 30-gal. (260-lb.) steel drums. Metal Deactivator No. 2: A 49% solution of the same active ingredient as in Metal Deactivator but having better resistance to crystallization. Us e : Same as Metal De activator. Co n t a in er s : 30-gal. (250-lb.) steel drums. Metal Deactivator No. 3: A 65% solution of the same active ingredient as in Metal Deactivator but having more favorable crystallization properties. Us e : Same as Metal Deactivator. Co n t a in e r s : 30-gal. (250-lb.) steel drums. Metal Suppressor: Counteracts the pro-oxidant effect of- copper- or copper alloys and thereby increases stor age stability of gasoline and fuel oil exposed to such surfaces. An amber colored liquid containing 50% active ingredient dissolved in methanol and isopropanol. "Ortholeum" 162 Lubricant Assistant: A mixture of mono- and di-alkyl phosphates (RHsPO* and RsHP04). Light brown viscous liquid; freezing point about 15C.; Sp. Gr. 0.99; miscible with oil in all proportions. Us e : In oils to improve film strength and to impart rust pre ventive properties. Concentrations vary with nature of applications. Co n t a in e r s : 55-gal. (425-lb.) steel drums. "Ortholeum" 300 Grease Stabilizer: Mixture of com plex aromatic amines providing a combination of an anti oxidant and a metal deactivator action. It is a tan-colored, flaked product. USE: As a stabilizer for greases. Concentra tion required is usually 0.1 to 1.0% by weight. Co n t a in e r s : 175-lb. fiber drums. Phenyl-alpha-naphthylamine--Cid Ht NHCs Hs : Lem on-yellow lumps and irregular pellets up to }/i in. diameter: Sp. Gr. 1.17. Normal concentration--up to 0.5% in oils, up to 1.0% in greases. Us e : As a stabilizer for greases, transformer oils and turbine oils. Phenyl-beta-naphthylamine--CioHhNHCeHc: A yel low-gray powder; Sp. Gr. 1.18. Us e: As a stabilizer for greases and lubricating oils. Concentration--up to 0.5% in greases; up to limit of solubilities in oils. Co n t a in e r s : 51-gal. (160-lb.) fiber drums. Rust Preventive No. 2: 80% Active ingredient in kero sene. A straw colored liquid. Us e : As an antirust and surface active antistalling agent in petroleum distillates at concentrations up to 0.01%. Co n t a in er s : 55-gal. (400-lb.) steel drums, tank cars. Tetraethyl Lead Compound--(C2H3)4Pb--Aviation Mix: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; Sp. Gr. 1.74. Us e : In concentrations up to 4.6 cc. TEL per gal. as an antiknock agent for aviation gasolines. Co n t a in e r s : Liter cans, 10- and 55-gal. drums, 3,000- and 6,000-gal. tank cars. PE DUP210011438 ORGANIC CHEMICALS DEPARTMENT PETROLEUM CHEMICALS DIVISION Tetraethyl Lead Compound--(CHj)<Pb--Aviation Mix--Dilute Solution: A liquid solution ofAviation Mix, a mixture of 70% xylene and 30% n-heptane; Sp. Gr. 0.96. Us e: For TEL blending of gasolines used in laboratory engine testing. The dilute solution allows greater accuracy in adding small volumes of TEL. CONTAINERS: Liter cans. Tetraethyl Lead Compound--(CsHs^Pb--Motor Mix: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; Sp. Gr. 1.59. Us e: In concentrations up to 4 cc. TEL per gal. as an antiknock agent for motor gasolines. Co n t a in e r s : Liter cans, 10and 55-gal. drums, 3,000- and 6,000-gal. tank cars. Tetramethy! Lead Compound--(CH3) Pb--Motor Mix: A liquid antiknock compound the principal compo nent of which is tetramethyl lead; Sp. Gr. 1.586. Us e : In concentrations up to 2.05 cc, TML per gal. as an antiknock agent for motor gasolines. Co n t ain e r s : Liter cans; 10and 55-gal. drums, 3,000- and 6,000-gal. tank cars. "Tetramix" Antiknock Compound--Motor Mix: A liquid antiknock compound the active component of which is a redistribution mixture of tetraethyl and tetramethyl lead; Sp. Gr. 1.591. Us e : In concentrations up to 2.52 cc. active ingredient per gal. as an antiknock agent for motor gasolines. Co n t a in e r s : Liter cans, 10- and 55-gal. drums, 3,000- and 6,000-gal. tank cars. S3 8 If 4 DUP210011439 PHOTO PRODUCTS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES AND WAREHOUSES: Atlanta 18, Georgia Boston (Waltham 54), Massachusetts `Chicago 46, Illinois Cleveland 16, Ohio `Dallas 7, Texas `Los Angeles 38, California `New York 11, New York Calls for "Dycril" Philadelphia (Wynnewood), Pa. Warehouse Location. 1737 Ellsworth Industrial Drive, N. W. 45 Fourth Avenue 4560 Touhy Avenue, Lincolnwood, Edgebrook Station 20575 Center Ridge Road 1628 Oak Lawn Avenue 7051 Santa Monica Boulevard 248 West 18th Street 40 Worth Street (New York 13) 308 East Lancaster Avenue PLANTS: Parlin, New Jersey Rochester, New York Towanda, Pennsylvania Mail) to any bFffie above Ideations should be" addressed to: E. I. du Pont de Nemours 8s Company (Inc.), Photo Products Department Fine C duplic. develoare ot film h expose contra rather a decic greater is exet Availa "Cror emulsi contra speed, mensic Avails 70 mn PRODUCTS CAMERA NEGATIVE FILMS T/A NH 5 Mil Base Panchromatic Negative Film: A fine grain panchro matic negative film of wide latitude for interior as well as exterior photography. This film may also be used as a rever sal duplicating film. Available in 16 mm. Type 914A only. "Superior" 4 Negative Film: A super-sensitive panchro matic negative film recommended for both interior and exterior use wherever limited illumination levels prevail. Its special sensitivity and fine grain structure permit the use of reduced apertures where increased depth of field is desired in television and theatrical motion picture pro duction. An excellent film for high speed photography. Available in 16 mm. Type 928A and 35 mm. Type 928B. Rapid Reversal Panchromatic Negative Film: A medi um speed panchromatic negative designed especially for rapid reversal processing at temperatures up to 125F. for use in television newsreel arid sports photography. Available in 16 mm. Type 930A only. High Speed Rapid Reversal Panchromatic Negative Film: A high speed panchromatic negative stock designed especially for rapid reversal processing at temperatures up to 125F. for use in television newsreel and sports photog raphy. Available in 16 mm. Type 931A and 35 mm. Type 93 IB (perforated for high speed cameras only). "Superior" 2 Negative Film: An all purpose panchro matic negative stock for both exterior and interior pro duction work. This film has extremely fine grain, medium speed, and wide latitude. Available in 16 mm. Type 936A and 35 mm. Type 936B. Hi `Cronar" 4.5 Mil Base Films for high speed photography, data recording, missile tracking, aerial photography and other non-entertainment uses where thinner, tougher, dimensionally stable, more flexible and longer film lengths are desirable. "Cronar" High Speed Rapid Processing Negative: Same emulsion as 931 Type. Available in 16 mm. Type 131A, 35 mm. Type 13l'B, 70 mm. Type 131E, 5.481 in. and 9)4 in. widths. "Cronar" "Superior" 2 Fine Grain Negative: Same emulsion as 936 Type. Available in 16 mm. Type 136A. 35 mm. Type 136B, 70 mm. Type 136E, 5.481 in. and 9)4 in. widths. "Cronar" High Contrast Fine Grain Negative: A fine grain panchromatic negative with high red sensitivity especially designed for instrumentation photography where ground to air and air to ground photographic records are desired. Available in 16 mm. Type 140A, 35 mm. T>'Pe 140B, 70 mm. Type 140E, 5.481 in. and 9)4 in. widths- SAFETY DUPLICATING FILMS T/A NH 5 Mil Base Fine Grain Panchromatic Duplicating Negative Fill"1 An exceptionally fine grain, high resolution emuJsKM1 designed specifically for making duplicate negativesAvailable in 16 mm. Type 908A, 35 mm. Type 908B, a 35 mm. perforated 32 mm. Type 908D. Sounc variab VA a: 16 mrr Fine variat and m in 35 i Relea tive er twice 35 mn Fine i work picturInhere hard, of Ions 35 mn Cror emuls: projec brittle used f 22 5A, DUP210011440 PHOTO PRODUCTS DEPARTMENT r ad io g r aph ic pr o d u c t s T/A Plain 5.5 Mil Base Fine Grain Master Positive Film: A fine grain positive duplicating film which can be processed in normal positive developer. Gammas in the desirable range of 1.50 to 1.60 are obtained at standard release developing times. This film has sufficient speed to permit printing in the same exposure range as fine grain release positive. Reduction of contrast through emulsion manufacturing techniques rather than through use of yellow dye gives this material a decided speed advantage over dyed materials and much greater resistance to scratches and abrasions. Type 828A is excellent for making low contrast TV release prints. Available in 16 mm. Type 828A and 35 mm. Type 828B. SAFETY DUPLICATING FILMS "Cronar" Plain 4 Mil Base "Cronar" Fine Grain Duplicating Positive: Same emulsion as 828 Type. Ideal for applications where medium contrast duplicates are required without sacrificing printing . speed. Used for duplicating aerial negatives where di " mensional stability is important such as aerial mapping. : Available in 16 mm. Type 228A, 35 mm. Type 228B, 70 mm. Type 228E, and 91 in. widths. SAFETY SOUND RECORDING FILMS T/A NH 5 Mil Base Sound Recording Film: A high speed variable area or ariable density recording film. Use positive developer for VA and negative developer for VD work. Available in 16 mm. Type 802A and 35 mm. Type 802B. Fine- Grain VA Sound Recording Film: An improved variable area sound recording film combining fine grain and maximum sensitivity. NH base reduces flare. Available in 35 mm. Type 833B. SAFETY RELEASE POSITIVE FILMS T/A Plain 5.5 Mil Base Release Positive High Speed Film: A high speed posi tive emulsion for special release work where approximately twice regular print positive speed is required. Available in 35 mm. Type 803B. Fine Grain Release Positive Film: For general release work and dubbing prints which require the optimum of picture and sound quality. Image color is blue-black. Inherent noise level is exceptionally low. Emulsion is very hard, with high scratch resistance and is coated on a base of long wearing quality. Avai.able in 16 mm. Type 825A, 35 mm. Type 825B, and 32 mm. Type 825C. SAFETY RELEASE POSITIVE FILMS "Cronar" Plain 4 Mil Base "Cronar" Fine Grain Release Positive Film: Same emulsion as 825 Type. Especially suited for continuous projection prints where long wear and freedom from brittleness and perforation tearing are important. Also used for oscillograph recording. Available in 16 mm. Type 225A, 35 mm. Type 225B and 70 mm. Type 225E. SAFETY SPECIAL PURPOSE FILMS T/A Plain 5.5 Mil Base Title Stock Film: A high speed emulsion used in title cameras for regular title card and special effect work. Produces the sharply defined images required. Specially perforated to yield maximum steadiness in animation cameras. Available in 35 mm. Type 805B only. Fine Grain Low Contrast Positive Film: A low con trast, fine grain emulsion designed for photographing either negative or positive images on television monitor tubes. Available in 16 mm. Type 824A and 35 mm. Type 824B. TV Recording Film: A high speed, low contrast, fine grain emulsion designed for photographing either negative or positive images on television recording tubes. This film is approximately 2}^ times faster than Type 824 and may also be used as a reversal duplicating stock. Available in 16 mm. Type 834A and in 35 mm. Type 834B. LEADER STOCKS T/A 5.5 Mil Base Safety Black 5s Leader Stock: For daylight loading rolls, also "A" and "B" roll printing leader. Available in 16 mm. Type T13A and in 35 mm. Type T13B. Safety Exposed Rawstock 5s Leader Stock: For leaders and trailers on motion picture reels and "A" and "B" roll printing^mseffs: Available in 16 mm. Type T71A and in 35 mm. Type T71B, "Cronar" Plain 4 Mil Base "Cronar" Polyester Photographic Film-Safety Plain 4s: For developing machines. Available in 16 mm. Type P40A and in 35 mm. Type P40B. "Cronar" Plain 7 Mil Base "Cronar" Polyester Photographic Film--Safety Plain 7s: For developing machines. Available in 16 mm. Type P70A and in 35 mm. Type P70B. RADIOGRAPHIC PRODUCTS MEDICAL X-RAY FILMS DuPont produces four different x-ray film emulsions for the medical field, each emulsion possessing distinct char acteristics to suit it for a special use. Uniformity, abrasion resistance and ability to withstand hot weather processing are inherent in all four emulsions which are coated on blue safety base. "Xtra-Fast" Film, Type 508: A double coated high speed film with maximum contrast for medical radiography with intensifying screens. Available in all standard sizes. Co n t a in e r s : Boxes of 25 sheets interleaved, 100 sheets N.I.F. (Non-Interleaved Film), and Thrift Pak.* "Fluoro-Film" X-ray Film, Type 560: 70 mm. fast blue sensitive film for use with the Fairchild FluoroRecord Camera in photographing the blue fluorescent screen. Available in 100-ft. rolls only. Five 100 sheet N.I.F. boxes/case 8 x 10 in.. 10 x 12 in., and 14 x 17 in. Three 100 sheet N.I.F. boxes/case 11 x 14in. 85 i DUP210011441 PHOTO PRODUCTS DEPARTMENT RADIOGRAPHIC PRODUCTS "Fluoro-Film" X-ray Film, Type 562: 70 mm. fast green sensitive film for use with the Fairchild FluoroRecord Camera in photographing the green fluorescent screen. Available in 100-ft. rolls only. INDUSTRIAL X-RAY FILMS Three special emulsions are produced for the radiography of materials. All are outstanding for their uniformity, abrasion resistance and ability to withstand hot weather processing. Screen Film, Type 504: For all types of industrial work where intensifying screens are used. Available in all standard industrial sizes. Co n t ain e r s : Boxes of 100 sheets N.I.F. (Non-Interleaved Film). Fine Grain Film, Type 506: For direct exposure or ex posure using lead screens. Exceptionally fine grain, with wide exposure adaptability to all x-ray voltages and gamma radiation. Available in all standard industrial sizes. Co n t a in e r s ; 100 sheets N.I.F. (Non-Interleaved Film). Coated on polyester base. Very Fine Grain Film, Type 510: For direct exposure or exposure using lead screens. It has the finest grain of the Industrial Films and is approximately the speed of Type -506.-Especially suited for critical inspection of light metals such as aluminum, magnesium and their alloys. Also used in the 1,000 to 22,000 kv. range. Co n t a in e r s : Boxes of 100 sheets N.I.F. (Non-Interleaved Film). Coated on polyester base. Day Pack Films, Types 506, 508 and 510: A 200-ft. roll of 70 mm. x-ray film enclosed in a light-tight paper sleeve to permit handling and use in daylight. 506 and 510 Types coated on polyester base. DOSIMETER FILMS Dosimeter Film Packets, Types 544, 552, 558 and 559: Special packets containing two films for measuring radia tion dosage. Carried by personnel subject to exposure to hazardous radiation. Co n t a in e r s : 150 "Pull-A-Tab" packets per box. Dosimeter Film Packet, Type 553: Same as above but containing three films. Dosimeter Film Packets, Types 543 and 545: Same as above but containing one film. DENTAL X-RAY FILMS Dental x-ray films have blue safety base, wide exposure latitude, antiabrasion coating over the emulsion and posi tive dot identification. Both single and double coated films come in the exclusive "Pull-A-Tab" packet, designed for easy opening and handling in the darkroom. Double Coated (D) Film, Type 550: A fast x-ray film coated with emulsion on both sides. Co n t a in e r s : 150 packets per box, 1 film per packet (code 150 D-l) 150 packets per box, 2 films per packet (code 150 D-2) 86 Lightning Fast (LF) Film, Type 555: A very fast, double coated film having the inherent speed necessary for use in the long cone technique. It is also used to advantage with low powered x-ray equipment. Co n t a in e r s : 150 packets per box, 1 film per packet (code 150 LF-I) 150 packets per box, 2 films per packet (code 150 LF-2) No. 3 Bitewing Film, Type 557: An x-ray film coated with emulsion on both sides having the same speed as Type 550. For use in recording on one film the corona! two-thirds of both the maxillary and mandibular teeth. Co n t a in e r s : 25 packets per box, 1 film per packet. CINE FLUOROGRAPHY FILMS Cine-Ray: 16 mm. and 35 mm. (Type 936) film for use in cine fiuorography. X-RAY FILM PROCESSING CHEMICALS Concentrated Chemicals: Liquid concentrated chem icals for processing x-ray films. Developer, replenisher and fixer are each supplied in 1- and 5-qt. bottles to make, respectively, 1 and 5 gal. of solution. Concentrated Dental Chemicals: Liquid concentrated chemicals for processing dental x-ray films. Developer and fixer are-supplied in 24-oz. bottles to make 1 gal. of working solution. Developer and fixer are packaged in mailing unit called Twinpack. Powdered Chemicals: "Xtra-Fast" developer and rtplenisher, and single powder fixer for processing x-ray films. Supplied in package sizes to mix 1, 5, 20 and 100 gaL of solution. STAINLESS INTENSIFYING SCREENS Hi-Speed: A fast, stainless screen reproducing definition closely comparable to that ofPar Speed, for general medical radiography where extra speed is essential; also excellent for low-powered and portable x-ray units. Par Speed: Standard speed, stainless screen for all general medical radiography*. Lightning Special: A very fast, special purpose screen having highest speed throughout medical kilovoltage range. For use where speed is primary requirement. Detail: A special purpose screen designed to reproduce the finest detail possible in screen radiography. Multi-Section Screen Book: A book of seven matchrf pairs of intensifying screens of different speeds for multi section radiography. Industrial: For high speed industrial radiography. Screen Cleaner: A cleaner specifically formulated Du Pont Stainless Intensifying Screens. An importan bonus benefit for the inhibition of static electricity. FLUOROSCOPIC SCREENS Type CB-2: Unique plastic screen for medical and trial fluoroscopy. Supplied in a wide range of standard special sizes. Has cleanable surface. INDUS scr Type copy. I or witt Type with s to 35% For o; analys: IN "Cron. arts. A "Cron. chrome polyest is quick latitude "Cron orthoch in. pol Availal Ortho i mendec "Cron contras structu: that gr ' caused ' .004 in. Acetate i orthoch: fsurfaces : trapped ; camera cracking ; "Crona contrast [ halation [ film bas ron cam' f reduce F 1.004 in. ["Crona llitho era |formulat nd the (available DUP210011442 INDUSTRIAL PRODUCTS PHOTO PRODUCTS DEPARTMENT SCREENS FOR MINIATURE RADIOGRAPHY Type D: Blue fluorescing. Not suited for regular fluoros copy. Used with special blue sensitive film. Supplied with or without cleanable surface. Type E-2: Same spectral emission as Type CB-2 for use with special green sensitive film. Cleanable surface. 30 to 35% more brilliant than Type CB-2. DIFFRACTION FILTERS For obtaining monochromatic x-radiation in diffraction analysis. tin cm> and Utt, ted tad in* ait re*! *y ;aL 30 rtd at al m e. >e d i- >r it i INDUSTRIAL PRODUCTS 1 # INDUSTRIAL AND GRAPHIC ARTS FILMS 8 "Cronar" Clear Base: A clear polyester film for graphic arts. Available in three types: C-41--.004 in. thick, sub-coated on one side. Supplied in rolls only. C-42--.004 in. thick, sub-coated on two sides. Supplied in standard sheet sizes. C-72--.007 in. thick, sub-coated on two sides. Supplied in standard sheet sizes. "Cronar" Ortho A Litho Film: A high contrast, orthochromatic litho emulsion coated on .004 in. and .007 in. polyester film base with a nonhalation, backing. This film is quick drying, lies flat, etches easily and has wide exposure latitude with high resolving power. "Cronar" Ortho B Litho Film: A high contrast, orthochromatic litho emulsion coated on .004 in. and .007 in. polyester film base with a non-halation backing. Available in same sizes and package units as "Cronar" Ortho A. Use of "Cronar" Ortho B is especially recom mended when hardest halftone dot structure is required. "Cronar" Ortho IVI Litho Film: An extremely high contrast orthochromatic film which has incorporated in its structure a unique emulsion and backing surface treatment that greatly minimizes the common contact problems caused by Newton's rings and trapped air bells. Standard .004 in. polyester film base. Acetate Ortho Litho Film: An extremely high contrast orthochromatic film on an acetate base. The special surfaces on both sides greatly minimize Newton's rings and trapped air problems. It is especially suited for those camera and contact jobs which require intricate stripping, cracking and scribing. "Cronar" Clear Back Ortho Film: An extremely high contrast orthochromatic film with a low density anti halation coating designed to permit exposure through the film base. This provides lateral reversal of image directly on camera. The special surfaces on both sides greatly reduce Newton's rings and trapped air problems. Standard .004 in. polyester film base. "Cronar" Pan Litho Film: A high contrast panchromatic litho emulsion on .004 in. polyester film base, especially formulated for color separation work in photolithography and the graphic arts. It has a nonhalation backing and is available in all standard sizes. "Cronar" Commercial Film: A blue sensitive emul sion on .007 in. polyester photographic film base. Retouchable surface. Designed especially for making continuous tone negatives and positives. It is also well suited for posi tives or cancelling masks for color separation techniques. "Cronar" Masking Film: A fast blue sensitive, medium contrast emulsion on .004 in. polyester film base. Retouchable surface. For use in color separation masking, contact copying and negative duplicating. "Cronar" Pan Masking Film: A fast panchromatic, medium contrast photographic emulsion on polyester film base. Retouchable surface. Designed particularly for color separation masking and duplicating. "Cronar" Direct Positive Clear Film: A high contrast, contact speed film especially suited for making duplicate or laterally reversed neagatives and positives. It is exposed through amber or yellow sheeting. "Cronar" Reflection Color Separation Negative Film; A moderately high contrast, continuous tone panchromatic film on .007 in. polyester base. Retouchable surface. For making separation negatives from reflection copy. "Cronar" Transparency Color Separation Negative Film: A medium contrast panchromatic film on .007 in. polyester base. Retouchable surface. For making separation negatives from color transparencies. "Cronar" Low Gamma Pan Film: An extremely fast, low contrast continuous-tone film on .007 in, polyester base. Retouchable surface. For making separation negatives in color systems where low density range or low gamma is required. Rotofllm: A high contrast orthochromatic emulsion used for making etch resists in the gravure industry. It is coated on a clear safety base with nonhalation backing. The base can be later stripped from the emulsion after laydown on plates or cylinders. Screen .Process Film: A camera speed orthochromatic emulsion on a stable supporting base from which it is stripped to become the actual stencil for silk screen print ing. Film may be exposed in a copy camera, in an enlarger or by contact. Developing Powder A and Activator B are supplied singly or in 1-gal. and 5-gal. combination units. "Cronar" Recording Film: A high speed, blue sensi tive, medium contrast emulsion on .004 in. polyester photo graphic film base. Retouchable surface. Designed for use in high speed oscillographic cameras and related photo recording equipment. Lino-Flex Photorecording Film: A blue sensitive emul sion on "Cronar" polyester photographic film base for use in oscillographic recording equipment. Supplied in Type B (.003 in. thick base) and Type W (.004 in. thick base). ENGINEERING REPRODUCTION FILMS DuPont "Cronaflex" engineering reproduction films are coated on "Cronar" polyester photographic film base. They are extremely durable, flexible, and have a high degree of dimensional stability. "Cronaflex" films handle easily in processing and dry quickly. They lie flat after processing and the special matte surfaces permit sharp, clean pen and pencil lines which will not smear or smudge, yet can be erased easily and cleanly. Three types of "Cronaflex" films are available in sensitized form: 87 PHOTO PRODUCTS DEPARTMENT TRADE PRODUCTS "Cronaflex" Contact Film: A slow speed photographic film on ,004 in. and .007 in. "Cronar", for making contact reproductions. "Cronaflex" Direct Positive Film: A photographic emulsion on .004 in. and .007 in. "Cronar", which will produce positive prints directly from original copy without the need for making intermediate negatives. "Cronaflex" Projection Film: A fast projection speed, orthochromatic film on .004 in. and .007 in. "Cronar". Ideally suited for making work-size prints from miniatur ized negatives. "Cronaflex" Projection Film may also be processed for use as an offset printing plate. "Cronafiex" Drafting Film: The surface and base of this .004 in. "Cronar" polyester film are made in one complete process to provide a drafting material with superior pencil acceptance, erasability, transparency and tear strength. Supplied in all standard roll and sheet sizes. "Cronaflex" U.C. Drafting Film: A drafting film with a fine matte surface which has superior ink acceptability. The special surface also readily accepts pencil. Supplied on .004 in. and .007 in. "Cronar" in all standard roll and sheet sizes. INDUSTRIAL AND GRAPHIC ARTS PAPERS Micro-Writ: A fast orthochromatic projection paper with high contrast. Especially designed to make prints from microfilm negatives. Supplied in two types: B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte "Litho" T Photographic Paper: A transparent water proof stock, nonhalation backed, with a high contrast orthochromatic projection emulsion. It is an economical material for line reproduction work. "Photo-Writ" Photocopy Paper: A paper producing deep, rich blacks and crisp, clean whites with high contrast for photocopy work. Furnished in rolls spooled to fit standard photocopy machines, "Photo-Writ" is available in four types: A - Thin, Semi-Matte B - Standard Weight, Semi-Matte K - Standard Weight, Semi-Gloss W- Extra Thin, Semi-Matte . Lino-Writ 1 Photorecording Paper: A photographic paper for general oscillograph recording. Spooled in sizes to fit all standard recording oscillographs. Supplied in types: B - Standard Weight W- Extra Thin Lino-Writ 2 Photorecording Paper: A moderately high speed orthochromatic photographic paper for use in oscillo graphic recording over a wide range of exposures at low, normal and medium frequencies. Types: B - Standard Weight W- Extra Thin 88 Lino-Writ 3 Photorecording Paper: An orthochromatic paper for oscillographic recording at high writing speeds. Spooled to fit all standard recording oscillographs. Supplied in types: B - Standard Weight W- Ultra Thin Lino-Writ 4 Photorecording Paper: Fastest, thinnest, whitest of all photorecording papers. Spooled in standard sizes. Ultra thin, all rag base. Lino-Writ 5 Direct Writing Photorecording Paper: A high speed photorecording paper designed for use in direct writing oscillographs. Exposure is made with light rich in blue. Development is automatic in low density white light. ' B - Standard Weight W- Ultra Thin Seismo-Writ Recording Paper: High contrast and wide latitude with rapid developing and fixing characteristic* make this photographic paper suitable for use with field recording machines employed in oil exploration work. Available in sizes to fit all standard seismic recorder*. Supplied in types: B - Standard Weight W- Extra Thin SPECIAL PRODUCTS "DH" Dehydrated Photographic Emulsion:Projection speed emulsion supplied in dry form for mixture with water at the point of use. It is designed particularly for photo lofting where large areas which may be sensitized only on location of use. May be used on such surfaces as metal and wood. TESTED CHEMICAL PREPARATIONS Prepared developers and fixers for use with industrial photographic products are also available. TRADE PRODUCTS SHEET FILMS "Cronar" Commercial: A fine grain blue sensitive photographic film for general copy and commercial work. It is comparatively slow in speed, clear, of brilliant grada tion, and can be handled under bright red safelight. "Cronar" Arrow Pan: A high speed film with high red sensitivity which gives greatest speed advantage in inc***" descent light and excellent color correction by daylight and by daylight fluorescent lighting. "Cronar" High Speed Pan: Combines high speed wta balanced color sensitivity. Suitable for all high portrait, commercial and press work, but particularly adaptable for electronic flash lighting. TRADE "Crona medium colors. "Crona photogr optimur All shet Du Per, recomrr. availab! Black a graphic white rc retouchi. photo rr contrast "Varig; Providir "Variga to conta of hard soft grac changin' intermec easy use ; High S : graphic j photogre [plete co: [speed, a [High Sp [double w `Varilo | A fast p; [The con [produce DUP210011444 JCIS -tic ^lied land W! : in :ght sity ide ics rid rlt. r*. n X 0 1 1 1 I TRADE PRODUCTS Si w ^ "Cronar" X-F Pan: A general purpose film possessing z$ medium speed and correctly balanced sensitivity to all j' colors. % "Cronar" Press: Extremely fast film designed for press J3 photography. Wide exposure and development latitude for' H optimum response under difficult lighting conditions. ? All sheet films are coated on nonhalation "Cronar" base. f Du Pont 16-D Film Developer and 16-DR Replenisher are jp recommended for processing of all portrait films. These are | available in packaged form. it 3 PHOTOGRAPHIC PAPERS g Black and White Proof Paper: A developing-out photojs graphic paper with full projection speed supplied on a Jj white rough luster medium weight stock which minimixes retouching, scratches and grain. Widely used for making y photo murals as well as portrait proofs, it is available in 'contrast grades 2 and 3. "Varigam" Variable Contrast Photographic Paper: Providing in one emulsion complete contrast control, "Varigam" has projection speed but may easily be adapted , to contact printing. Exposure to blue light renders a print ; of hard gradation and exposure to yellow light, a print of soft gradation. A full range of contrast may be obtained by : changing the color of the printing light. Blue, yellow and intermediate colored optical plastic filters are available for easy use. "Varigam" is available in nine surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W, B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. R - White Glossy S.W. T - White Glossy D.W. Y - White Silk Texture D.W. High Speed "Varigam" Variable Contrast Photo graphic Paper: Designed especially for the professional photographer, this paper combines the advantages of com plete contrast control with exceptionally high projection speed, approximately twice that of regular "Varigam". High Speed "Varigam" is available in eight single and double weight surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. WPS - White Water Resistant Seixn-Matte S.W. "Varilour" Variable Contrast Photographic Paper: A fast projection paper designed for mass production use. The contrast of "Varilour" can be raised or lowered to produce prints of uniform high quality from negatives which vary widely in contrast. This paper will produce warm black prints and will tone well in conventional direct polysulfide toners as well as in bleach and redevel opment toners. Surfaces available are: DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. Y - White Silk Texture D.W. "Velour Black" Photographic Projection Paper: An enlarging paper noted for high speed in exposure and re markable fidelity to negative scale as well as simplicity in handling. "Velour Black" is made in four degrees of con trast for all uses in portrait, commercial, industrial and illustrative photography as well as photofinishing. It is furnished in the following surfaces: A - White Semi-Matte S.W. Grades 1, 2, 3, 4 AL - White Semi-Matte Document W. Grades 2, 3 B - White Semi-Matte D.W. Grades 1, 2, 3 BT - White Semi-Gloss D.W. Grades 2, 3 DL - Velvet Grain Natural White Luster D.W. Grades 1, 2, 3, 4 DS - Velvet Grain Natural White High Luster D.W. Grades 2, 3 R - White Glossy S.W. Grades 1, 2, 3, 4 T - White Glossy D.W. Grades 1, 2, 3, 4 Y - White Silk Texture D.W. Grades 1, 2. 3 Warmtone Photographic Projection Paper: An en larging paper which yields images of a warm brown color. Although designed for projection prints, it is adapted easily to contact printing by reducing the intensity of the printing light. Available in six surfaces, double weight only. DDL - Natural White Rough Luster D.W. DL - Velvet Grain Natural White Luster D.W. DLW - Velvet Grain White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. Y - Natural White Silk Texture D.W. ZL - Artweave, Natural White Rough Cloth Texture D.W. Standard formulas for projection papers are Du Pont 53-D and 5S-D Developers obtainable in ready-to-use form. DuPont 18-F Universal Fixer is recommended. SPECIAL PRODUCTS "Adlux" Photographic Film for Transparencies: A transparent safety base film coated on both sides with "Velour Black" photographic projection paper emulsion in which a diffusing medium has been incorporated. Used in making prints for viewing by transmitted light. "Cronapaque" Print Film: A white semi-opaque film for making prints that can be viewed by either reflected or transmitted light. It has a high speed variable contrast emulsion on .007 in. "Cronar" polyester photographic film base and yields crisp, rich black continuous tone prints from negatives of widely varying contrasts. 89 DUP210011445 PHOTO PRODUCTS DEPARTMENT LUMINESCENT CHEMICAL PRODUCTS Plastic Filters for Use with "Varigam'' and "Varilour" Variable Contrast Photographic Papers: Mounted plastic filters, supplied in one size only, consist of a 2J^ in. square black plastic frame with a numbered tab and a 2in. circular optical plastic filter aperture. Sets of five and ten filters are available, packaged in a red plastic box. A black, molded plastic filter holder which attaches to enlarger lens barrel and a simplified instruction form which contains a filter selection chart are included with the Basic (5-A) and Complete (10-C) sets. Individual mounted filters and unmounted sheets of filter material are also supplied on special order. S-55X Safelight: An orange-brown color safelight which is satisfactory for all sensitized papers, both enlarging and contact including "Varigam". It combines maximum safety from light fog with maximum eye comfort. Prints viewed by this light during processing show a quality comparable to that under white light inspection. TESTED CHEMICAL PREPARATIONS Chemical preparations include developers and fixers for papers and films and "B-B" Developer Additive for blueblack tones and for extending the life of developers. These are available in easy-to-use packages. LUMINESCENT CHEMICAL PRODUCTS ------------- --------FLUORESCENT AND PHOSPHORESCENT CHEMICALS Luminescent Chemicals (Phosphors) are available for: Fo c u s in g Pl a t e s f o r Ul t r a v io l e t Mic r o s c o p y : A green fluorescing zinc silicate which responds to 2537 A.U. ultraviolet light, coated on glass. Sc r e e n s f o r El e c t r o n Mic r o s c o p e s Mis c e l l a n e o u s Us e s : Also prepared to supply miscel laneous phosphors to meet individual requirements. PRINTING PLATE PRODUCTS "Dyeril" Photopolymer Printing Plates: A photo sensitive plastic bonded to various metal supports. Ex posure to an ultraviolet light source renders exposed areas insoluble to a subsequent mild alkaline washout solution so that a reliefimage of the exposed pattern remains. Depth of image is dependent on the thickness of the photosensitive plastic layer. There are seven types available: Type 25 --.008 in. steel backing yielding .010 in. relief depth. Image area of 24 x 28 in. on 28 x 30 in. steel support. Total thickness approximately .025 in. " Type 30 --.012 in. steel backing yielding .012 in. relief depth. Image area of 24 x 28 in. on 28 x 30 in. steel support. Total thickness approximately .030 in. Type 50 --.012 in. steel backing yielding relief depth of .030 in. Available 18 x 24 in. size. Total thickness approximately .050 in. Type 60 --.012 in. steel backing yielding relief depth of .040 in. Available 18 x 24 in. size. Total thickness approximately .060 in. Type 152--.105 in. aluminum backing yielding a relief depth of .040 in. Available 18 x 24 in. size. Total thickness approximately .152 in. Type 180--.133 in. aluminum backing yielding a relief depth of .040 in. Available 18 x 24 in., and 20 x 24 in. size. Total thickness approxi mately .180 in. Type 240--.193 in. aluminum backing yielding a relief depth of .040 in. Available 18 x 24 in. size. Total thickness approximately .240 in. MISCELLANEOUS PRODUCTS Photographic Sponges GEN BRA PLAf WAF 90 DUP210011446 PIGMENTS DEPARTMENT 0ENERAL OFFICE; Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 1BAHCH OFFICES: Atlanta 12, Georgia Boston (Malden 48), Massachusetts Chicago 6, Illinois Cincinnati 6, Ohio Cleveland 20, Ohio Detroit 35, Michigan Houston 27, Texas New York 1, New York Pasadena, California Philadelphia 3, Pennsylvania Portland 9, Oregon San Francisco 24, California 225 Moore Street, S. E. 359 Washington Street Room 1711, 20 North Wacker Drive - 2330 Victory Parkway 11900 Shaker Boulevard 13000 West Seven Mile Road 3202 Weslayan Avenue 1027 Empire State Building, 350 Fifth Avenue 22-25 Meade Building, 325 North Lake Avenue 910 Architects Building, 117 South Seventeenth Street 1238 N. W. Glisan Street 1485 Bayshore Boulevard JAckson 5-4557 DAvenport 2-8080 ANdover 3-7000 AVon 1-2343 LOngacre 1-1060 UNiversity 4-1963 MOhawk 6-0161 LOngacre 3-6400 MUrray 1-7431 LOcust 6-2080 CApitol 2-6012 JUniper 5-9231 PLANTS: WAREHOUSES: Baltimore, Maryland Brevard, North Carolina Edge Moor, Delaware Highland, Florida Atlanta^ Georgia- Baltimore, Maryland Chicago, Illinois Cleveland, Ohio Dallas, Texas Detroit, Michigan Edge Moor, Delaware Houston, Texas Indianapolis, Indiana Jackson, Mississippi Johnsonville, Tennessee Kankakee, Illinois Kansas City, Missouri Lewiston, Idaho Johnsonville, Tennessee Newark, New Jersey Newport, Delaware Trail Ridge, Florida Ldckland, Ohio Los Angeles, California Louisville, Kentucky Malden, Massachusetts Minneapolis, Minnesota Memphis, Tennessee Newark, New Jersey New Orleans, Louisiana Newport, Delaware Philadelphia, Pennsylvania Portland, Oregon San Francisco, California Seattle, Washington Wilmington, Delaware PRODUCTS PIGMENT COLORS finely divided colored chemical pigments of organic and norganic types in dry and paste forms. Many hues in ch of the following broad classifications are available to the pigment consuming industries: Alkali Resistant Reds--"Naphthanil" Diazo Pigments Arylide Reds and Maroons--"Naphthanil" Diazo Pig ments Auric" Ferric Oxide, Hydrated--Brown Basic Zinc Chromate Benzidine Yellows Chrome Oranges Chrome Yellow Pigments Copper Maroon "Dalamar" Azo Yellow "Duol" Carmine Lithol Pigment Durable Nonbleeding Reds and Maroons--Precipitated Diazo Pigments Ferric Oxide, Hydrated (See "Auric" Ferric Oxide, Hydrated--Brown) Green-Gold--Durable Organic Yellow Hansa Yellows Indanthrone Blues Lithol Rubine Red 91 DUP210011447 r PIGMENTS DEPARTMENT Molybdate Oranges "Monastral" Pigments--Phthalocyanine, Blue "Monastral" Pigments--Phthalocyanine, Green "Monastral" Pigments--Reds and Violet Organic Oranges--Diazo Pigments Phosphomolybdic Add Colors--Basic Dye Complex Phosphotungstic Add Colors--Basic Dye Complex Pigment Green B Pigment Scarlet Platinum-Violet--Durable Shading Pigment "Ramapo" Lightfast Blue and Green Pigments Toluidine Reds "Watchung" Red Pigments--Preripitated Diazo Pig ments Water Dispersible Colors--Organic and Inorganic Zinc Yellow--Basic Zinc Potassium Chromate Us e : As coloring or compounding materials in paints, lacquers, enamels, printing inks, leather, linoleum, floor tile, coated fabrics, plastics, rubber, fancy coated paper and wall paper. TITANIUM PIGMENTS "Ti-Pure" Titanium Dioxide is available in two types, one in which the titanium dioxide is in the rutile form (as indicated by the suffix "R") and the other in which it is in the anatase form. Rutile types of pigment show 20-40% greater tinting strength and opadty than the anatase types. "Ti-Pure'' R Titanium Dioxide Rutile (Titanium Oxide)--TiO,: A fine, dry, white powder; Sp. Gr. 4.2; in dex-of refraction 2.71. Available in various grades with distinctive properties. Us e : In paints, linoleum, lacquers, paper, leather, inks, rubber and plastics as a pigment. Co n t a in e r s : 50-lb. paper bags. "Ti-Pure" Titanium Dioxide Anatase (Titanium Oxide)--TiO*: A fine, dry, white powder; Sp. Gr. 3.88; index of refraction 2.53. Available in various grades with distinctive properties. Us e: Similar to "Ti-Pure" R. Co n t a in e r s ; 50-lb. paper bags. "Ti-Pure" VG Titanium Dioxide (Titanium Oxide) --TiOsI A free flowing type of dry powder developed espedally for use in vitreous enamels for iron and steel and the general ceramic field. "Ti-Pure" VG is not a pigment grade but a coarse partide size product falling mainly be tween 80 and 325 mesh. Co n t a in e r s : 50-lb. paper bags. "Ti-Cal" R Titanium Calcium Pigment Rutile: A fine, white powder available in various grades with dis tinctive properties; Sp. Gr. 3.25; approximate analysis is 30% TiOs and 70% CaSCh. Us e : In flat paints, architec tural finishes, gloss paints and enamels. Co n t a in e r s : 50-lb. paper bags. SPECIALTY PRODUCTS "Tipersul" Fibrous Potassium Titanate: Crystalline fibers 1 micron in diameter melting at 2500F. Useful to 2200F. Us e : High temperature thermal, acoustical and electrical insulations; filter media. Fo r ms : Lumps, blocks and loose fibers. (Sold only through Wilmington Office.) Columbium Metal--Cb: A ductile metal possessing low thermal neutron cross-section and high melting pointUs e : Structural material in nuclear reactors and as a base for high temperature alloys. Fo r ms : Ingots and mill products of columbium and its alloys. (Sold only through Wilmington Office.) Silicon, Hyperpure--Si: Semiconductor grades and Solar Cell grade. Us e : In electronics industry for transis tors, diodes, rectifiers and solar batteries. (Sold only through Wilmington Office.) Titanium Metal--Ti: A light, strong, corrosion resistant metal. Us e : Structural metal and alloy ingredient. Fo r m: Sponge metal. (Sold only through Wilmington Office.) 92 GENERAL DISTR1C' Bosto Chica Detrc Los A New ' Philac PLANTS: Acrylic f "Alatho ' ular matt ' tough e\ | moisture ' and grea: : has excel and nont ; but is me gases. M [ in densit ! In addit; : ties, app [ trical ay i excellent | processi: raging, t | lining of | and cab' : conveyi: [ ucts; in. ; from ini ; 23-gal. c 1 hollow : s' tainers, [bags, 1,: rib. retu: 5 loads (5 Brushe i "Butai | pliable range c nated s . moistu: impact in seve: bullet r safety requiri CONTAtons. Comb: DUP210011448 with Co n - *ide) toped 1 and ment y bebags. e: A : dissis is '.itec O-Ib. POLYCHEMICALS DEPARTMENT GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES: Boston 10, Massachusetts Chicago 46, Illinois Detroit 35, Michigan Los Angeles 58, California New York 1, New York Philadelphia 3, Pennsylvania 140 Federal Street HAncock6-1711 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) ORchard 5-1010 13000 West Seven Mile Road TJNiversity4-1963 2930 East 44th Street LUdlow2-6464 Empire State Building; 350 Fifth Avenue LOngacre3-6400 1616 Walnut Street Kingsley6-4600 PLANTS: Orange, Texas Parkersburg, West Virginia Victoria, Texas lline ll to and ocks ice.) low int. last mill -igh ind 513- rly nt m: PRODUCTS Acrylic Resin: (See "Lucite" Acrylic Resin, this page.) "Alathon" Polyethylene Resin: Translucent white gran ular material. In the finished forajt is flexible, extremely tough'even ^at very low temperatures, unaffected by moisture and aging, resistant to most chemicals, solvents and greases. Among the lightest of all plastic materials, it has excellent dielectric properties and is tasteless, odorless and nontoxic. As a film it has very low water permeability but is more permeable to carbon dioxide, oxygen and other gases. Many compositions are available. Base resins differ in density, melt index, and molecular weight distribution. In addition, there are additives to improve surface proper ties, appearance or weatherability. Resins offered for elec trical applications contain antioxidant to maintain the excellent low power factor and dielectric constant during processing. Us e s : Extruded into film and coatings for pack aging, building construction, agricultural mulching, and lining of irrigation ditches and ponds; extruded onto wire and cable for insulation and jacketing and into pipe for conveying cold water, corrosive chemicals, and food prod ucts; injection molded into thousands of objects ranging from ink cartridges for ballpoint pens to garbage cans of 23-gal. capacity; blow molded into squeeze bottles, jars, and hollow shapes; thermoformed from heavy sheet into con tainers, trays, housings, etc. Co n t ain e r s ; 50-lb. paper bags, 1,500-lb. nonretumable corrugated containers, 10,000lb. returnable collapsible rubber containers, 2,000-lb. unit loads (50-lb. bags), 100,000-lb. bulk car. Brushes: (See Plastics Products Division, Page 95.) "Butacite" Polyvinyl Butyral Resin (Sheeting): Soft pliable sheeting. Extremely flexible and tough over a wide range of temperatures and moisture conditions. In lami nated safety glass, it is highly resistant to heat, light and moisture, also holds broken pieces of glass together under impact. Available in colorless, gradient band tinted, and in several transparent colors. Us e : Automotive safety glass, bullet resistant glass, shatter resistant glazings for aircraft, safety shields for television; architectural applications requiring safety, glare control, or special color effects. Co n t a in e r s : 750-ft. rolls in fiber tubes, or palletized car tons. Combs: (See Plastics Products Division, Page 95.) "Delrin" Acetal Resin--(-OCHg-)n: Thermoplastic in form of cylindrical pellets. Supplied in two basic composi tions-- 500 series general purpose injection molding resins and 150-series general purpose extrusion resins. Supplied in natural (white) or number of standard colors. Molded or extruded articles have remarkable combination of chemical and physical properties: High strength and stiff ness combined with toughness and resilience over wide temperature range; good dimensional stability in presence of moisture; high heat distortion temperature; excellent resistance to all types of organic solvents; excellent bearing characteristics and good abrasion resistance. Lik e l y Us e s : Injection molded articles for automotive parts such as interior hardware, bushings and bearings for suspension and steering linkages, squirrel cage blowers, gears, instru ment clusters, fuel pump and carburetor parts; electrical components. Pump impellers, housings and cover plates, showerheads, cutlery handles, tumblers, pen parts, appli ance gears, combs, and aerosol containers; extruded articles and shapes include tubing, coated wire, sheeting, blow molded aerosol bottles. Co n t a in e r s : 50-lb. bags. "Lucite" Acrylic Resin (Molding Powders): Granular solid and cube-cut (for injection molding and extrusion); in minute spherical granules (for compression molding). Available in water-white, transparent and a range of transparent, translucent and opaque colors. Molded and extruded articles have outstanding crystal transparency in clear form; excellent outdoor stability; "light-piping" and "edge-lighting" qualities; lightness of weight; shatter resistance; dimensional stability. Three grades are available for injection molding and extrusion (each with its counter part in forms suitable for compression molding): soft-, medium- and hard-flow. The hard-flow formulation is indicated wherever heat resistance is important in an acrylic part. Us e : Molded by injection or compression for auto motive parts (hom buttons, instrument dials, tail light lenses, indoor and outdoor decorative medallions, re flectors); combs and brush backs; lighting fixtures; pen and pencil barrels; small signs and displays; refrigerator parts (door handles, freezing compartment doors, decorative medallions); costume jewelry; aircraft parts. Extruded for lighting fixtures, large signs, glazing and decorative trim. Co n t a in e r s : 250-lb. fiber drums and 1,000-lb. cartons. 93 DUP210011449 POLYCHEMICALS DEPARTMENT "Lucite" Acrylic Resin Dental Materials: Monomer and granular polymers used in the manufacture of dentures, teeth, crowns and inlays. Methyl Methacrylate Monomer--CHaC(CH3)COOCH3: Water-white, mobile, volatile liquid containing a small amount of polymerization inhibitor. Us e : Primarily in the manufacture of acrylic resins and plastics. Co n t a in e r s : 5-gal. cans, 55-gal. drums, tank trucks, 8000-gal. tank cars. "Teflon" FEP-Fluorocarbon Resin (E? Molding Powder): Clear bead cut pell-, melt extrusion, compression and injection me of continuous service up to 200'C; outstar. properties; unaffected by virtually all solver, cals; excellent low temperature toughness: g to adhesion. USE: Extruded insulation for h and high temperature wire and cable, jacke for coaxial cables, chemical and electrical tu electrical components, such as tube sockets, r. connectors, etc., bearings, seals and gaskets. 5-, 50-, and 100-lb. fiber containers. Methacrylate Polymers: [See '`Lucite" Acrylic Resin (Methacrylate Polymers), Page 6.] . "Teflon" TFE-Fluorocarbon Resin (Mo ders): White granular powder of small par:: "Monocite" Methacrylate Monomer--H100: A spe cially manufactured grade of methyl methacrylate. Us e : In the manufacture of cast acrylic sheets. Co n t a in e r s : Insulated tank trucks. affected by all solvents and practically all c'. solvents; outstanding electrical properties; continuous service at 500F. (260'C.); good : ture toughness; unique resistance to adhesion : all sticky materials. Us e : Molded, extruded ; Nylon Filaments: (See "Tynex" Nylon Filaments, and Nylon Monofilaments, Page 95.) from sheet or rod stock as gaskets, packing, seals, bearings; spacers for coaxial cables, inser: connectors, tube sockets; insulation for high high temperature and high voltage wires and Nylon Molding Powders: [See "Zytel" Nylon Resin quality wrapping tape for insulation in motors (Molding Powders), Page 95.] and conductors; nonadhesive surfaces for fc. sealing plates and guides .on. packaging- machir Nylon Monofilaments; Monofilaments are'available'in molds; Co n t a in e r s : 5-, 25- and 220-lb. fiber sizes from 3 to 100 mils. They are produced from a series of ( nylon polymer compositions varying in physical properties. Typical applications are fishing line, leaders and snelled hooks, woven and non-woven applications, industrial fasteners, air and liquid hose reinforcement materials. Filaments are produced in both round and special cross sectional shapes and colors. Monofilaments are available in 461 -j-in. long hanks and cut pieces and in continuous length on spools. "Teflon" TFE-Fluorocarbon Resin (Extru: der): White powder, specially manufactured fer in a modified extrusion technique involving organic extrusion aids. Properties similar :: "Teflon" molding powder. Us e : Extruded as ta wire insulation, and shapes, for use in chemical h and lined pipe, gasket stock, insulation on air electronic hookup wire, tape wrapped insulation Nylon Resins, Soluble: [See "Zytel" Nylon Resin (Solu ERS: 18- and 50-lb. fiber containers. ble Resin), Page 95.] "Teflon" TFE-Fluorocarbon Resin (Aqueou: Polyethylene: (See-"Alathon" Polyethylene Resin, Page 93.) sion): Milky white liquid consisting of minute p. tetrafiuoroethylene resin in water (60^ solids), v. amount of wetting agent. Offers fundamentally "Rulan" Flame-Retardant Plastic for Electrical In sulation: A white granular material specially developed for the electrical industry to meet the need for a good dielectric with flame-retardant characteristics. Does not support combustion or drip when heated above the melting point; electrical properties approach those of "Alathon" polyethylene resin. Us e : Extruded as insulation for many types of wires and cables where flame resistance is impor properties as "Teflon" molding powder, with tr.t tion advantages of the liquid form, Us e : Cast capacitor layer insulation; coated glass fabric and 1 for electrical insulation, non-adhesive sheets, impregnated asbestos fabric and braid for gasipacking; finishes for non-adhesive coatings; wire for magnet wire; blends with other resins and nile t a in e r s : 1-, 5-, and 30-gal. drums. tant; injection molded into components for radio, television and telephone. Co n t a in e r s : 50-lb. paper bags. Toilet Articles: (See Plastics Products Division, P "Stren" Monofilament Fishing Line Products: Spe daily processed high strength, limp and low elongation monofilaments for use as spin fishing line in breakloads from 2 to 30 pound test and oval casting, surf and trolling lines in breakloads from 10 to 60 pound test. Packaged in plastic boxes containing one or more 50 and 100 yard spools. Product line includes individually packaged knot less tapered leaders and level leader packs in a complete range of sizes. Sold only through authorized agents. Toothbrushes: (See Plastics Products Division. F "Tynex" Nylon Filaments, Tapered: Black. essentially uniform taper from butt to rip. Us e : Pr in paintbrushes. Paintbrushes made of "Tynex'' used with all paints; hold and spread paint well; to clean. CONTAINERS: Boxes containing bundles minimum. 94 DUP210011450 - ha. 3t and able for -apable ectrical chemiistance quency *d core molded - seals, INERs : Pow- Un is and 4e of peraically sated nical axial rncy, high ators rolls, rndy '.ers,- o*. sing - of of :ng. :n - rof all ::c n* :-S s: ) POLYCHEMICALS DEPARTMENT PLASTICS PRODUCTS DIVISION "Tynex" Nylon Filaments, Level: Natural, black and colors in a wide range of constant diameters. Supplied in paper-wrapped hanks (diameter 2", length 461-i", weight approximately 4 lb.); in cut pieces, paper-wrapped (diameter 2", lengths 1" through 461 Y in increments of 1/16"); and in the form of multistrand ropes on spools and single-strand continuous lengths on spools (returnable metal spools are 12 ' in diameter and each spool holds ap proximately 5 lb. net weight of filament). "Tynex" is tough and strong; resistant to abrasion, heat, moisture, petroleum products, alkalies and dilute acids. Has excellent bend-recovery and flex-life. Us e : Filling for personal, household, maintenance, industrial brushes, and mechani cal street sweeps; filament for wigs, surgical sutures. Co n t a in e r s : Hanks, cut pieces and spools (5) shipped in cartons. Approximate net weight of filament per carton: 25-lb. minimum. "Zytel" Nylon Resin (Molding Powders): Solid gran ular material, cube-cut or chopped; some types available in colors. Several types of nylon are available, varying in heat resistance, solvent resistance and flexibility. In gen eral, articles molded, extruded or machined from nylon are tough over a wide range of temperatures, resistant to abrasion, form-stable at high temperatures, strong in thin sections, light in weight and resistant to chemicals and solvents.;- and have unusual bearing-characteristics. Us e : Injection molded for automotive parts (interior lenses, light-load gears and bearings, fuse holders, insulator bush ings, pedal bushings); coil forms of many types, wireconnectors, strain-relief grommets, battery cases; mechani cal parts for textile machinery, business machines, home movie cameras, electric shavers, household appliances; tumblers, combs, brush backs; sterilizable medical items. Extruded as abrasion-resistant jacketing for electrical wires and cables and for mechanical cables. CONTAINERS: 25-lb. cans. "Zytel" Nylon Resins (Special Extrusion Powders); Solid granular material, cube-cut. Properties similar to molding powders, but with still greater toughness and much higher melt viscosity. High melt viscosity permits the extrusion of shapes to accurate dimensions. Us e : Precision-extruded shapes such as rods, tubing, and chan nels of various design; tough transparent film sheeting; coated flexible materials; blown bottles and other contain ers. Co n t a in e r s : 25-lb. cans. "Zytel" Nylon Resin (Soluble Resin): Cream colored cubes. Alcohol-soluble polyamides having an unusual com bination of properties, including toughness, flexibility and high elongation; excellent resistance to most solvents in cluding aliphatic and aromatic hydrocarbons, and to alka lies and oxygen-containing gases. Us e : Coatings for textiles and paperv-adhesives; hydrocarbon barrier in fuel cells. Co n t a in e r s : 50-lb. paper bags. PLASTICS PRODUCTS DIVISION GENERAL OFFICE: New York 1, New York Empire State Building, 350 Fifth Avenue PLANT: Leominster, Massachusetts TELEPHONE LOngacre 3-6400 PRODUCTS Combs and Brushes: Combs and brushes of the types listed below, made cf "Lucite'' acrylic resin. ''Zytel'' nylen resin, "Delrin" acetal resin and other plastics, are available in various colors ar.d designs, seme cf which are designpatented. Combs made of nylen are marked DuPont nylon. Combs made of "Delrin" are marked DuPont "Delrin". Some are sold under the trademarks "Lido". "Arlton" and "La Belle" Beautician Combs Women's Dressing Combs Purse-size Combs Purse-size Brush-Combs Purse-size Curl-Combs Purse-size Comb and Brush Sets Men's Combs Men's Pocket Combs, with or without Clips Barbers' Combs Infants' Combs and Brushes Toiletries: Hand brushes, nail brushes, soap boxes, tooth brush holders. Some soap boxes and toothbrush holders made of "Alathon" polyethylene resin. Toothbrushes: A line comprising all the well-known and accepted styles for adults and children, sold under the trademarks "Arlton'', "Dentabest", "Paramount" and Park Avenue", bristled with "Tynex" nylon. Toothbrusnes made of nylon are marked All nylon. Included are brushes with handles of ``Lucite'' acrylic resin and of "Zytel" nylon resin. Toothbrushes are packaged in trans parent plastic utility containers and in boxes wrapped in cellophane. Also a line of brushes for dentures. 95 DUP210011451 REMINGTON ARMS COMPANY, INC. (Stock owned: common 60.17%; preferred 99.55%) GENERAL OFFICE: Bridgeport 2, Connecticut BRANCH OFFICES: Berkeley 2, California Boston Office Chicago 3, Illinois Cleveland 14, Ohio Dallas 1, Texas Greensboro, North Carolina Jacksonville 7, Florida Memphis 3, Tennessee Minneapolis 3, Minnesota New York Office Pittsburgh 22, Pennsylvania St. Louis 1, Missouri Salt Lake City 11, Utah 2735 San Pablo Avenue 939 Bamum Avenue; Bridgeport 2, Conn. 7 South Dearborn Street 1308 Union Commerce Building 1241 National Building 517 Jefferson Building 1603 Prudential Building, 841 Miami Road 1701 Sterick Building 614 Plymouth Building 939 Barnum Avenue; Bridgeport 2, Conn. 2001 First National Bank Building 1810 Arcade Building 909 Walker Bank Building PLANTS: Bridgeport, Connecticut Findlay, Ohio llion, New York EE THorr. ED SI PRcs; River BRoac FLar.. JAcl FEc ED. GF M EL PRODUCTS REMINGTON SHOTGUNS "Sportsman" 58 Shotgun--Autoloading: 3-shot; 12, 16, 20 gauges,..`.`Power-Matici'-gas-operated shotgun. Non recoiling barrel. Us e : For skeet, trap, upland game and water-fowl shooting. Model 11-48 Autoloading Shotgun: 5-shot; made in 12, 16 and 20 gauges (4-shot in 28 and 410 gauges). 3-shot plug supplied without cost. Us e : For upland game and water fowl shooting; small upland game and skeet for 28 gauge and 410 gauge. . Model 878 "Automaster" Shotgun--Autoloading: 3 shot; 12 gauge. "Power-Matic" gas-operated shotgun. Non-recoiling barrel. Us e: For upland game and waterfowl shooting. "Wingmaster" Model 870 Shotgun--Pump Action: 5-shot; 12, 16 and 20 gauges; takedown; hammerless,- solid breech. 3-shot "Vari-Weight" metal plug in 12 gauge only; 3-shot wooden plug furnished in all gauges. Us e : For skeet, trap, upland game and waterfowl shooting. Model 725 Bolt Action Big Game Rifle: De high power rifle made in 222 Remington, 243 Remington,. 3Q-06 Springfield, and 270-- Win 5-shot capacity. USE: For medium and big garr. "Woodsmaster" Model 742 Rifle--Autoloac Game: "Power-Matic" gas-operated rifle. H; solid breech; 280 Remington, 30-06 Springfield Win. calibers; also available in carbine mod Remington, 308 Win. and 30-06; 5-shot capa; For medium and big game hunting. "Gamemaster" Model 760 Rifle--Slide Act Game: High power slide action; hammerless; sc', made in 308 Win., 30-06 Springfield, 270 Win.. ington, 280 Remington calibers; 5-shot capa available in carbine model in 280 Remington, 305 30-06; 5-shot capacity. Us e; For medium and hunting. "Targetmaster" Model 510 Rifle--22 Calit Action: Single shot; chambered for short, long rifle cartridges, without adjustment; higher s: regular cartridges; open or peep sights. Us e : I game and target shooting. REMINGTON RIFLES Model 721 Bolt Action Big Game Rifle: Made in 280 Remington, 30-06 Springfield, 300 H 5s H Magnum, and 270 Win. calibers; 5-shot capacity. Us e : For medium and big game hunting. Model 722 Bolt Action Big Game Rifle: Made in 222 Remington (6-shot capacity), 222 Remington Magnum, 243 Win. (6-shot capacity), 244 Remington, 25 7 Roberts, and 308 Win. calibers; 5-shot capacity. Us e : For varmint, medium and big game hunting. "Scoremaster" Model 511 Rifle--22 Calib Action: Box magazine repeater; magazine hole tridges; chambered for short, long and long rifi. speed and regular cartridges, without adjustment peep sights. Us e : For small game and target shoe: "Sportmaster" Model 512 Rifle--22 Calib Action: Chambered for short, long and long rifi speed and regular cartridges, without adjustme:. matic ejector; bolt action repeater; tubular magazf 22 short, 17 long or 15 long rifle cartridges; Re receiver peep sight, or open sights. Us e: For srr. and target shooting. 96 DUP210011452 HONE 1 112 5514 3366 7781 7804 5908 5879 :252 5326 5800 091 076 622 686 ade 280 ers; ng..i 3ig ss; 108 ISO ;e : dg :h; al so ad ac It g d 11 t r r REMINGTON ARMS COMPANY, INC. "Matchmaster" Model 513T Rifle--22 Caliber Bolt Action--Target: 7-shot capacity; completely equipped with target sights, target stock, adjustable front swivel and precision sights; moderately priced. Us e ; For fine target shooting. Model 514 Single Shot 22 Caliber Bolt Action Rifle: Chambered for short, long and long rifle regular and higher speed cartridges, without adjustment. Open sights. Us e : Small game and target shooting. Model 521T 22 Caliber Bolt Action Rifle: 7-shot capacity. Especially designed for hunting and small bore target shooting. Chambered for long rifle cartridges. Target aperture on the micrometer rear sight is easily removed to give fine hunting peep sight. Adjustable front sling swivel; 1-in. sling of high quality leather; Lyman No. 57RS micrometer rear sight. Weight, about 7 lb. Us e : For small game and target shooting. Model 550 Autoloading 22 Caliber Rifle: Chambered for short, long or long rifle cartridges, without adjustment. Magazine holds 22 short, 17 long or 15 long rifle cartridges. Us e : For small game hunting and shooting galleries. "Speedmaster" Model 552 Autoloading 22 Caliber Rifle: Chambered for short, long and long rifle cartridges, without adjustment. Magazine holds 20 short, 17 long or 15 long rifle cartridges. Us e : For small game hunting and shooting galleries. "Fieldmaster" Model 572 Rifle--22 Caliber Slide Action: Takedown: hammerless; solid breech; slide action; 23-in. barrel; chambered for short, long and long rifle cartridges, without adjustment; magazine holds 20 short, 17 long or 15 long rifle regular or higher speed cartridges. Also available in Lightweight model ("Fieldmaster" Model 572 Lightweight) with choice of Crow-Wing Black or Buckskin Tan colors. Us e: For small game hunting and informal shooting. "Rangemaster" Model 40X Rifle--22 Caliber Bolt Action--Target: Heavy barrel; target stock; adjustable sling swivel; built-in bedding device; weight approximately 12 lb. with heavy barrel, 10 lb. with standard barrel. Us e : For fine target shooting. REMINGTON AMMUNITION Shotgun Shells with "Kleanbore" Priming "Express" Shotgun Shells: Green corrugated shell with Remington Crimp; 10, 12, 16. 20, 28 and 410 gauges (10 and 410 gauges in roll crimp only, not corru gated). Outstanding heavy load, hard hitting, even pattern. Wetproof, long range. Loaded with progressive-burning powder. Also in standard length (2 ;-in.) Magnum and extra length 3- and 31 2-in. shells. Us e : For maximum long range game shooting. "Express" Buckshot Loads: Green corrugated shell; 12, 16 and 20 gauges. Us e: For deer, black bear, wolf; also guard and police duty. "Express" Slugs--Rifled: Green corrugated shell; 12, 16, 20, 28 and 410 gauges (410 gauge not corrugated). In creased velocity, great striking energy, long range. Im proved bullet-type shape, external rifling and hollow base cause the slug to travel with fine accuracy. USE: For deer, bear and other big game. "Shur Shot" Shotgun Shells: Red corrugated shell; 12, 16 and 20 gauges. High quality, smokeless powder shell with Remington Flat-Top Crimp. Us e : For medium range game shooting; minimum recoil. "Shur Shot" Scatter Loads: Red corrugated shell; 12, 16 and 20 gauges. Smokeless powder. Shot divided into cells by wads between layers to give open patterns with chokebored shotguns. Us e : For short range shooting. Target Loads: Green corrugated shell; 12, 16 and 20 gauges. Us e: For trap and skeet shooting. Remington Rim Fire 22 Caliber Cartridges with "Kleanbore" Priming "Kleanbore" is the original noncorrosive priming in the United States. It will not cause rust or corrosion in rifle or shotgun barrels. "Hi-Speed" Cartridges--22 Caliber Rim Fire: Fine accuracy, longer range, greater energy, higher velocity than standard velocity 22's. Us e : For small game and pest shooting at long ranges. "Rocket" Cartridges--22 Caliber Rim Fire--Short: Special composition bullet ;'high muzzle velocity,_Us_E:.For InformalT shooting and medium-range small game hunting. Remington Match 22 Caliber Rim Fire Cartridges: Long rifle ammunition that employs smokeless powder and "Kleanbore" priming. Unexcelled for accuracy. Us e : For match rifle, and match pistol shooting. "Spatter-Less" Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxic; pulverizes on impact. Us e: For gallery shooting. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular speed ammunition. Us e: For hunting small game or target shooting. Remington Blank and Shot Cartridges Made in assorted rim fire and center fire calibers for rifles, revolvers and pistols. Blank cartridges used largely for athletic events. Shot cartridges used for small game, and in miniature trap and skeet shooting. "Kleanbore" priming. Remington Center Fire Rifle Cartridges Calibers for all sporting purposes. "Kleanbore" priming does not cause rust and corrosion. Special progressive burning powder gives high velocities. Powder and priming protected from excess oil by a special oilproof process. Famous for high accuracy. Us e: For medium and big game hunting and target shooting. "Hi-Speed" Cartridges--Center Fire Rifle: Available in a wide variety of center fire calibers. Us e : For medium and big game hunting. "Express" Rifle Cartridges--Center Fire: Available in a wide variety of center fire calibers. Us e: For medium and big game hunting. 97 DUP210011453 REMINGTON ARMS COMPANY, INC. Remington Center Fire Rifle Cartridges "Auto Angling" Model 41 Trap: Throws pe ( with "Core-Lokt" Bullets and double targets at 72 different angles, adjustable. Simple operation. Us e: For trapshc Cartridges in big game calibers. The "Core-Lokt" bullet provides maximum expansion, minimum disintegration and unexcelled knockdown power. Us e : For hunting all North American big game. REMINGTON POWDER ACTUATED T Stud Drivers and Accessories Accessory Fittings: Couplings, tension washer Remington Pistol and Revolver Cartridges conduit clips, discs, etc., for special fastening us Cartridges in all standard calibers. Protected by a special oilproof process against effects of oil used for lubrication. Will retain initial energy whether in chamber or magazine. Powerful.accurate.penetrating. Noncorrosive"Kleanbore" priming. Us e: For police, hunting and target purposes. Model 455A Remington "Power-Mate": . operated powder actuated basic unit. May be with any one of four barrel kits to make up a S' for driving alloy steel studs into concrete, similar hard construction materials and for fastt materials (wood, sheet metal, insulation, fixtur: "Targetmaster" Cartridges--Center Fire--Pistol and concrete or steel base materials. Weight: 5}-4 lb. Revolver: Available in several center fire calibers. Dis tinguished by wad cutter bullet, except for 38 Special round nose. Us e : For pistol and revolver target shooting. K-l "Captive-Stud" Kit: Built-in arresting ' vents free flight of studs in case of over-penetraconstruction materials. Weight: 6 lb. "Hi-Way Master" Cartridges--Center Fire--Pistol and Revolver: Available in 38 Special and 45 Automatic calibers. Distinguished by metal cased, metal penetrating bullet. Us e : Law enforcement. . REMINGTON TRAPS AND TARGETS K-2 V-in. Light Duty Barrel Kit: Anch diameter studs with 22 caliber standard Pov, Weight: 3]4 lb. K-3 ffc-in. Medium Duty Barrel Kit: Anch diameter studs with 22 caliber special Pov Weight: 3 lb. "Bl ue Rock" Targets: "Easy Breakers." Clean to han dle; easy to see. They smoke on impact of shot charge. The target with chrome yellow dome and flywheel action. Us e ; In all target traps which throw standard targets. Remington Hand Target Thrower: Light and easy_ta bperafeTDuplicates every type of wing shot by throwing targets any way desired. "The spring does the work." "Expert" Trap: For camps, cottages, boat and motor trips and "quail or walk-up" installations having a multiple trap layout. Light in weight, strong construction and port able. Low in price. ' "Blue Rock" Trap: Ideal for skeet or trapshooting for small clubs and private estates. Throws single and double targets for trapshooting. Shovel-type carrier. Easy to in stall and operate. Moderately priced. "Blue Rock" Skeet Outfit: Includes two "Blue Rock" traps, single lever control and same accessories as furnished with "Wonder" Single Lever Skeet Outfit. Moderately priced. K-4 %-in. Medium and Heavy Duty Bar Anchors j-in. diameter studs with 32 caliber Pov. Weight: 4 lb. "Mighty-Mite" Stud Driver--Remington M ._ A_highly-simplified, single-shot, hammer-operatec~ actuated fastening tool. Made with ^-in. bar caliber rim fire for driving ]4-in. studs only into tion materials as described above. Weight 3;!4 lb Special Guards for Model 455A Stud Drive changeable with standard guard. Guards conform of prefabricated building materials and fitting driving studs in hard-to-reach places. Stud Driver Power Loads--Special 22 and 32 Rim Fire: Eight graded powder charges in 22 ca five in 32 caliber to control penetration of J4-in. and 3 s-in, diameter fastening studs respectively struction materials. For medium duty applicatio: studs may be used in combination with 22 calib< Loads. Color of wad crimped into brass case : powder charge. Remington Autoloading Model 100T and 200S Trap: Holds 203 targets. Connects to standard 110 volt power supply. Easy to adjust for windage, elevation and tilt. Models for trap and skeet shooting. No trap boy needed. "Wonder" Skeet Outfit--De Luxe Electric: For DC or AC operation--DC outfit consists of two "Wonder" traps with electrical releases and accessories. For AC operation a Remington AC adapted is supplied in addition to DC equipment. "Wonder" Skeet Outfit--Single Lever: Includes two "Wonder" traps, single lever skeet pull, and galvanized wire. No additional accessories necessary. Can be adapted to electric release. Studs for Construction Fastening: Special ha steel. Four general types--standard head, breakinternal thread, external thread--53 varieties for sp fastening uses. Stud is held in barrel by oversi. "Power Guide" retainer disc cemented to head Maximum stud diameter is * 4-in.; thread sizes N.C., 34-in.-20 N.C. and 10^24 N. C. Remington Industrial Gun and Shells Model 400 Remington Industrial Gun: For r clinker rings and balls which form in rotary kilns the manufacture of cement, refractories, lime, ligi aggregates, lime sludge, etc. Also for removing pn rocks, ice and other obstructions in quarries anc Weight of gun and mount 176 lb. 98 DUP210011454 REMINGTON ARMS COMPANY, INC. ngt ;tely mts. ger>ped iver and tber ) to presoft -in. ids. -in. ;ds. dt: ds. 36: er=22. ic-\ Pe lit er id n. y 1, d -T J 6 g n t Remington Industrial Shells: Used in above gun. Approximately 8 gauge. Muzzle energy, 7,475 ft-lb. Muzzle velocity, 1,600 ft. per sec. Also made in Magnum. Muzzle energy, 9,000 ft-lb. Muzzle velocity, 1,700 ft. per sec. Remington Humane Stunners, Power Loads and Cartridges Humane Stunner Power Loads: Special 22 caliber crimped shot case blank power loads. Available in five graded load strengths: strengths indicated by color dip on. nose of load case. Model 411B Remington Humane Stunner: A single shot, bolt action tool for stunning animals (cattle, hogs, sheep) in meat packing houses. Contact-trigger operated. Short-travel piston with affixed concussion knob delivers blow of sufficient force to render animal unconscious prior to slaughter. Knobbed bolt handle, extended wooden operating handle; two-hand operation. Model 411C Remington Humane Stunner: Similar in design to Model 41 IB but employing a sleeve type bolt, and an automatically retracting penetrator rod instead of a concussion knob. Extended wooden handle; two-hand operation. Model 412 Remington Humane Stunner: Similar to Model 411C in that it employs sleeve bolt and auto matically retracting penetrator rod. Lever control; can be held and fired with one hand. Does not include extended wooden operating handle. Model 412A Remington Humane Stunner: Similar to Model 412 in that it employs sleeve bolt and lever con trol, and does not have extended wooden operating handle. Features a 2\ > in. diameter concussion knob instead of penetrator rod. Model 413 Remington Humane Stunner: Similar to Model 411B in that it employs knobbed bolt handle, etc. Features short handle, 2*-_, in. diameter concussion knob. Remington Stun Safe Humane Stunning Cartridges --22 Caliber Rim Fire: For industrial use only. Special composition projectile contains no lead, is non-toxic. Features `Concussion Cone' bullet design, 2,000 feet-persecond velocity, automatic fragmentation on contact with hard surface, "Kleanbore" primers. For use in any 22 caliber rimfire rifle designed for firing of maximum-power 22 caliber `Long Rifle' cartridges. CHAIN SAWS AND ACCESSORIES Super 75 Model: Direct-drive transmission, 7500 rpm engine speed at full load, Remington Power Pulse engine, 7,16 in. pitch--.058 in. tar.g chain, Remington Roller Bearing guide bars in 18-, 2-- and 30-in. lengths. Hori zontally mounted engine. . Bantam P Model: Similar to Bantam Model but equipped with 16-in. capacity pinchless-bow guide bar. SL-5 Model: Direct-drive transmission, 5500 rpm engine speed at full load, 7 16 in. pitch--.058 in. tang chain, Remington Roller Bearing guide bars in 18-, 24- and 30-in. lengths. Vertically mounted engine. SL-5P Model: Similar to SL-5 Model, but with 16-in. capacity pinchless-bow guide bar. GL-7 Model: Similar to SL-5 Model, but with more powerful engine. ' SL-5H and GL-7R Models: Similar to SL-5 and GL-7 Models but with planetary-gear transmissions (3.56-to-l ratio), 9/16 in. pitch--.058 in. tang chains (or optional 9/16 in. pitch--.077 in. tang chains), bar lengths to 36 in. SL-5RP and GL-7RP Models: Similar to SL-5R and GL-7R Models but with 16-in. capacity pinchless-bow guide bars, no chain option. SL-5G Model: Similar to SL-5 Model but with 2-to-l ratio gear transmission, 1 > in. pitch--.058 in. tang chain, bar lengths to 36 in. SL-5GS Model: Similar to SL-5G Model but with 3.2-to-l gear ratio. SL-5GP and SL-5GPS Models: Similar to SL-5G and SL-5GS Models, but with 16-in. capacity pinchless-bow guide bars. 2-MG Model: Detachable geared-transmission (2.86-to-l ratio) 360 indexing bar, 9/16 in. pitch--,077 in. tang chain, . Remington Roller Bearing guide bars in 18-, 24-, 30-, 36-, 42- and 54-in. lengths. 3-E Model: AC-DC, 25 to 60 cycle, 115 volts (230 volts available), rated 25 amps at 115 v. Spiral bevel gears, 800 feet-per-minute chain speed; generator wattage re quired: 5,000 watts. 9 16 in. pitch--.058 in. tang chain, 24- or 36-in. Remington Roller Bearing guide bars. EL Model: AC-DC, 25 to 60 cycle, 115 volts, rated 12 amps at 115 v. Spiral bevel gears, 800 feet-per-minute chain speed; generator wattage required: 2,000 watts. 7/16 in. pitch--.058 in. tang chain, Remington Roller Bearing guide bar 18 in. long. 1-P Model: One-man air-powered saw with 600 feet-perminute chain speed, 4-vane rotary motor, automatic oiler, equipped with ^-in. pitch--.058 in. tang chain, 12-in. Remington Roller Bearing guide bar. 6-P Model: Two-man air-powered saw with 1900 feetper-minute chain speed, 4-vane rotary motor, automatic oiler, equipped with 9,16 in. pitch--.077 in. tang chain, Remington Roller Bearing guide bars in lengths of 18-, 24-, 30-, 36- and 42-in. Pro 88 Model: Direct-drive transmission, 6000 rpm engine speed at full load, 7 16 in.--.058 in. tang chain, Remington Roller Bearing guide bars ir. 18-, 24- and 30-in. lengths. Vertically mounted engine. Bantam Model:. Direct-drive transmission, 5500 rpm engine speed at full load, 7 16 in. pitch--.058 in. tang chain, Remington Roller Bearing guide bars in 18-, 24and 30-in. lengths. Horizontally mounted engine. Chain Saw Accessories Remington Flat Top Saw Chain: 7 16 in. pitch--.058 in. tang. Features specially designed cutting teeth for fast cutting, easier sharpening, maximum strength. In lengths to fit guide bars and in 50- and 100-ft. reels. Remington 48411 Chain Saw Oil: Made for 2-cycle engines--specifically formulated for mixing with gasoline. Co n t a in e r s : Pt., in 24-pt. boxes. 99 DUP210011455 REMINGTON ARMS COMPANY, INC REMINGTON CONSTRUCTION AND INDUSTRIAL TOOLS 2 EGP Model: Same as 1 EG except speed--, supplies speeds of 1650, 2700, 4500 or 7400 n Vibrators, Concrete--Gasoline-Electric-Air 6"EG Model: Same as 1 EG except HP whic' 10 GV Model: 6?4 HP gasoline engine, 7500 to 10,000 vpm, flexible shaft drive, 14- to 28-ft. lengths. Choice of heads, 1?4'> 2%-, 3J4 or 43'2-in. diameters. 7 GV Model: 6/4 HP gasoline engine, 7000 vpm, flexible shaft drive, 14- to 28-ft. lengths. Choice of heads, 134- or 2%-in. diameter. 5 FG Model: Same as 1 EG except HP anc HP, 3 phase, 220 or 440 volts. 7 FG Model: Same as 1 EG except HP and p. 3 phase, 220 or 440 volts. Gasoline Trowels 36 GV Model: 3 HP gasoline engine, 3600 vpm, flexible shaft drive, 12- to 24-ft. lengths. Choice of heads, 1%- or 2j/-in. diameter. 1 EV Model: 1 HP Electric Universal motor, 115 volt AC-DC 10,000 vpm, flexible shaft drive, 2- to 14-ft. lengths. Choice of heads, 1J4- or lj-g-in. diameter. T 428 Model: 28 in. capacity, 100 lbs., four ; supplied with combination float finish blades 6 : T 434 Model: 34 in. capacity, 130 lbs., four r available with float or finish blades. T 444 Model: 44 in. capacity, 216 lbs., four supplied with finish or float blades. 2 EV Model: 134 HP Electric Universal motor, 115 or 230 volt, AC-DC 10,000 vpm, flexible shaft drive, 2- to 14 ft. lengths. Choice of heads, 1}-4- or 1%-in. diameter. Air Tools Grinders--Air 3 EV Model: 2 HP Electric Universal motor, 115 or 230 PGK 1030L Model: Lever type, 30,000 rpm. volt, 10,000 vpm, flexible shaft drive, 7- to 21-ft. lengths. Midget die grinder, weight: 12 oz. Choice of heads, 12%- or 314-in. diameter. PGK 1030B Model: Button type, 30,000 rpm. EV 26 Model: Electric motor-in-head 115 volt AC-DC, Midget die grinder, weight: 12 oz. 7- to 14-ft. lengths, head 2 94-in. diameter. PGK 2022L Model: 22,000 rpm, lever type, : 2 PV Model: 134 HP air motor, 10,000 vpm at 90 psi, Midget die grinder, weight: ljrg lbs. flexible shaft drive, 2- to 14-ft. lengths. Choice of heads, 134- or lj'g-in. diameter. PGK 2122L Model: Lever type, 22,000 rpm, Midget die grinder with extended spindle, weig 6 PV Model: 3? > HP air motor, 10,000 vpm at 90 psi, flex ible shaft drive, 7- to 21-ft. lengths. Choice of heads, lj-g-, PGE 1030L Model: Lever type, 30,000 rpm, : 2^- or 3 34'in- diameter. grinder for 34 in. vitrified or 1 in. organic whe ( 12 oz. PV 24 Model: Air motor-in-head, 10,000 vpm at 90 psi, 7- to 14-ft. lengths, head 2,1-o-in. diameter. PGE1030B Model: Same as PGE 1030L excep ton throttle. Impact Wrenches--Electric and Air W 1000 Model: Electric, 13 amps, 115 volts, 34 in. square drive 1 in. capacity, reversible, weight: 18 lbs. PGE 2022L Model: 22,000 rpm small wheel gr throttle for 1 in. vitrified or 1 ' > in. organic whe- llA lbs. " W 120 Model: Electric, 4 amps, 115 volts, 3 2 in. square drive, % in. capacity, reversible, weight: 734 lbs. PW 206P Model: Air, J2 in. square drive, 94 in. capacity, reversible, weight: 334 lbs. PW 308P Model: Air, 32 in. square drive, */% in. capacity, reversible, weight: 6 lbs. PW 4012P Model: Air, % in. square drive, ?4 in. capacity, reversible, weight: 11 lbs. PW 5014S Model: Air, ?-4 in. square drive, 1 in. capacity, I PGE 2122L Model: Same as 2022L except wit spindle, weight: 1?4 lbs. PG 3018L Model: Small wheel grinder for 1I4 : or 2 in. organic wheels, weight: 2 7 s lbs. less w: PG 2022L Model: 22,000 rpm grinder for 1 in. iVo in. organic wheels, weight: l:i4 lbs. less wi PG 506G Model: 6000 rpm grinderfor 4 in. vitri. organic wheels, weight: 85j lbs. less wheel guar: reversible, weight: 19?4 lbs. Sanders, Polishers--Air Circular Saws--Electric and Air 86 8?-j in. Electric Circular Saw, 2J4 in. cutting capacity, 12 amps, 115 volts, 35 lbs. shipping weight. P 86 Model: Air, 81 2 in. Circular Saw, maximum cutting capacity 234 in, weight: 14 lbs. P 128 Model : Air Circular Saw, 12 in. blade size, 4 5/16 in. maximum cutting capacity, weight: 33 lbs. Flexible Shaft Grinders 1 EG Model: 34 HP, single phase, 115 or 230 volts, 6 ft. shaft, 3450 rpm, available with hanger pedestal or round base mounting, straight and angle spindles, available accessories. PSA 307L Model: 7 in. disc sander, 5900 rpm, ' die thread, weight: 5:! 5 lbs. PPA 309L Model: Polisfter for use with 9 in bonnet, 950 rpm, J 3--11 spindle thread, weight: Drills--Air PD 103L Model: 2600 rpm, 34 in. chuck capacit drill capacity, weight: 14 oz. PD 204P Model: Pistol grip, 2200 rpm, 34 U- dri". weight: 2 lbs. PD 2G4L Model: Same as PD 204P except leve weight: l:i4 lbs. 100 DUP210011456 " shaft 2 HP. -21 2 3 HP, rowel 1 2 in. rowel rowel :ollet. ollet, diet, ollet, i lbs. vheel ighj but.ever ight: nded 'ified ;ard. :d or .ard. 6 in. ;pmung ity, tie, REMINGTON ARMS COMPANY, INC. PETERS CARTRIDGE DIVISION PD 304P Model: Pistol trigger, 2500 rpra, duty, weight: 3 lbs. in. heavy PD 3Q4L Model: Same as PD 304P except lever throttle. PD 326P Model: Pistol grip, 1400 rpm, 3 g in. heavy duty, weight: 4-ks lbs. PD 328P Model: Pistol grip, 575 rpm, 1 2 in. weight: 4j^ lbs. PD 508G Model: Grip handle trigger, 950 rpm, heavy duty, 1 2 in. capacity, weight: 91 2 lbs. PDA 224L Model: Angle drill, 1600 rpm, % in. capacity, weight: lj^ lbs. PDA 318L Model: Angle drill, 950 rpm, bj in. capacity, weight: 5J4 lbs. Screwdrivers--Air PSD 103L Model: Adjustable ball clutch, 2600 rpm, max imum capacity No. 8 free running screws, No. 5 heavy tapping screws with bit and finder, weight: 1 Yi lbs., nonreversible. PSD 204P Model: Adjustable ball type clutch, 2000 rpm capacity, l/i in. free running screws. No. 10 heavy tapping screws furnished with bit and finder, weight: 2 lbs., Pistol grip, non-reversible. PSD 204L Model: Same as PSD 204P except with lever throttle. PSD 306P Model: Adjustable ratchet type clutch, 2500 rpm, maximum capacity, in. free running screw, weight: 4 lbs., pistol grip, non-reversible. PSDR 204P Model: Adjustable ball type clutch, 1500 rpm maximum capacity, }i in. free running screws, No. 10 heavy tapping screw, weight: 2 7/16 lbs., reversible, fur nished with bit and finder. PSDR 306P Model: Adjustable ratchet type clutch, 2500 rpm capacity, % in. free running screw, weight: 4J-J lbs., reversible, furnished with bit and finder. Right Angle Nut Setters--Air PNA 316L Model: 950 rpm, J/j in. square drive spindle, % in. bolt capacity, weight: 4 lbs. PETERS CARTRIDGE DIVISION GENERAL OFFICE: Bridgeport 2, Connecticut BRANCH OFFICES: Berkeley 2, California Boston Office Chicago 3, Illinois Cleveland 14, Ohio Dallas 1, Texas Greensboro, North Carolina Jacksonville 7. Florida Memphis 3, Tennessee Minneapolis 3. Minnesota New York Office Pittsburgh 22, Pennsylvania St. Louis 1, Missouri Salt Lake City 11, Utah 2735 San Pablo Avenue 939 Barnum Avenue; Bridgeport 2, Conn. 7 South Dearborn Street 1308 Union Commerce Building 1241 National Building 517 Jefferson Building 1603 Prudential Building, 841 Miami Road 1701 Sterick Building 614 Plymouth Building 939 Barnum Avenue; Bridgeport 2, Conn. 2001 First National Bank Building 1810 Arcade Building 909 Walker Bank Building PLANT: Bridgeport, Connecticut TELEPHONE EDison 3-1112 THornwall 8-5514 EDison 6-3366 STate 2-7781 PRospect 1-7804 Riverside 2-6908 BRoadway 2-6879 FLanders 9-4252 JAckson 6-5326 FEderal 3-5800 EDison 6-5091 GRant 1-3076 MAin 1-8622 ELgin 5-8686 PRODUCTS PETERS AMMUNITION Shotgun Shells with "Kleanbore" Priming Peters "High Velocity'' Shells--Shotgun: Blue color; Peters Flat-Top Crimp; 10. 12. 16, 20. 28 and 410 gauges (10 and 410 gauges in roll crimp only). Loaded with pro gressive-burning powder. Thoroughly waterproof. Extra speed, uniform pattern, long range power. Also in standard length (2:i4-in.) Magnum and extra length 3-in. shells. Us e ; For maximum long range game shooting. "High Velocity" Buckshot Loads: 12, 16 and 20 gauges. Us e : For large game and police duty. "High Velocity" Slugs--Rilled: 12, 16, 20, 28 and 410 gauges. Us e: Shells loaded with rifled slugs are used principally on deer and bear in states where rifles are prohibited. "Victor" Shotgun Shells: Dark red color; 12. 16 and 20 gauges with the Peters Crimp. A quality shotgun shell at a popular price. Us e : For field shooting. "Victor" Spreader Loads: 12, 16 and 20 gauges. Shot is separated into cells by wads between layers of shot to secure open patterns. Us e : For thicket or close range shooting. 101 DUP210011457 REMINGTON ARMS COMPANY, INC. PETERS CARTRIDC- Target Loads: Blue color; 12, 16 and 20 gauges. Us e : For skeet and trapshooting. Peters Rim Fire 22 Caliber Cartridges with "Kleanbore" Priming Peters Match 22 Caliber Rim Fire Cartridges: Long rifle cartridges loaded with smokeless powder to standard velocities and designed especially for superfine accuracy. Us e : Particularly recommended for rifle target shooting. "High Velocity" Cartridges--22 Caliber Rim Fire: Developed for long range and great penetrating power. Us e : For small game and pest shooting. "High Velocity" Cartridges--22 Caliber Rim FireShot: Long rifle shot cartridges loaded with No. 12 shot. Us e : For small game, miniature skeet, and trapshooting. "Thunderbolt" Cartridges--22 Caliber Rim Fire-- Short: Special composition bullet; high muzzle velocity. Us e : For informal shooting and medium-range small game hunting. "Krumbie Bail" Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxie , pulverizes on impact. USE: For gallery shooting'. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular velocity ammunition. Us e: For hunting small game or target shooting. "Target" Cartridges--22 Caliber Rim Fire: Standard velocity cartridges designed for fine accuracy. Us e: For rifle and pistol target shooting. Peters "Oil-Tite" Cartridges--Center with "Kleanbore" Priming Cartridges loaded with bullets best adapts . spective uses and manufactured in all star. Highest velocity and positive ignition. Powd protected against deterioration through ci: moisture by special process. Us e: For me., game hunting and target shooting. "High Velocity" Cartridges--Center Fire able in a wide variety of center fire calibc medium and big game hunting. Peters Center Fire Rifle Cartrid with "Core-Lokt" Bullets Made in selected big game rifle calibers. Provi uniform expansion with minimum disintegra mendous knockdown power. Us e : For all Nc: big game. Peters "Oil-Tite" Cartridges--Pistol an with "Kleanbore" Priming Cartridges in all standard calibers. "Oil-Tr tection against oil in chamber or magazine, target shooting. Powerful, accurate, penct: corrosive "Kleanbore" priming. Uss: For and target shooting. "Highway Patrol" Cartridges--Center F and Revolver: Available in 38 Special and -i calibers. Distinguished by metal cased, meta! bullet. Us e : Law enforcement. Peters Blank Cartridges Made in rim fire and center fire calibers for rifi and pistols. Blank cartridges used largely events, theater productions and sound effects. 102 DUP210011458 ISION "fle ci! rc liben. primer ic anil ".d big Avail For lv*r pro14 for N- n* .ntin j *i*t, r.atV ivcrj ir'.lc SURPLUS MATERIALS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware PRODUCTS TELEPHONE PRospect 4-3700 Buildings: AU kinds for dismantlement Chemicals: Surplus Chemicals, Solvents, Acids, Pigments, Special Organic Compounds, Laboratory Reagents Construction Tools and Materials: All kinds--new and used Containers: Bags, Barrels, Bottles. Cartons. Drums (Steel and Fiber), Kegs, Pails. Compressed Gas Cylinders. Electrical Supplies: Conduit, Condulets, Fuses, Motors. Rheostats, Starters, Switches, Wire--new and used Furniture: ____ ' Office and Hotel Furniture and Equipment, Typewriters and Business Machines--used Machinery and Equipment: All kinds--new and used Automotive (Cars and Trucks). Factory Trucks and Railroad Equipment Boilers, Engines, Turbines and Steam Power Equip ment Centrifuges. Filters anc Dust Collectors Compressors (Air and Refrigeration) and Pumps Construction Equipment (Cranes. Tractors and Mis cellaneous Heavy Equipment) Drives Drying Equipment Electrical Equipment (miscellaneous) and Trans formers Fans, Blowers, Exhausters and Ventilators Heaters, Condensers, Exchangers and Coolers Hoists, Lifts and Conveyors Instruments and Metering Equipment Machine Tools and Shop Equipment Mills, Grinders, Crushers, Mixers and Cutters Motors, Gear Motors, Motor Reducers and M.G. Sets Office, Laboratory and Change House Equipment Safety and Fire Protection Equipment Scales Spare Parts Tanks, Kettles, Pressure Vessels, Stills and Columns Textile Equipment Vibrators, Shakers and Feeders Metal Scrap--Ferrous and Nonferrous: Aluminum, Brass, Bronze, Copper, Iron, Lead, Monel, Nickel, Stainless Steel, Steel, Tin, Zinc Mill Supplies: General Industrial Maintenance Materials--new and Used Paper Stock, Cloth and Rags: Fabrics, Rags, Paper, Rope Scrap and Used Filter Cloth Pipe, Valves and Fittings: All kinds--new and used Residues and Sludges: By-Products of All Descriptions; Recovered Acids, Solvents, Salts, Lime, Cinders, Graphite, Metallic Residues Specialties: Spools, Bobbins, Pirns and Cones; Experimental lots and seconds of some Company products; Rubber; Plastics Stainless Steel: Shapes, Pipe, Sheets, Valves--new and used Steel Products: Structural, Bars, Plates, Shafting, Sheets, Rails, Cable --new and used 103 I \ \ ISION ** .nr rc> ilibcn. primer ar.i* r.d big Availi: For :murn i trerrican >lrtr pro,s ft.r N n- 'iltOi rune Jtmg /-era .IcV.c SURPLUS MATERIALS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware PRODUCTS TELEPHONE PRospect 4-3700 Buildings: All kinds for dismantlement Chemicals: Surplus Chemicals, Solvents, Acids, Pigments, Special Organic Compounds, Laboratory Reagents Construction Tools and Materials: All kinds--new and used Containers: Bags, Barrels. Bottles. Cartons. Drums (Steel and Fiber), Kegs, Pails, Compressed Gas Cylinders. Electrical Supplies: Conduit, Condulets, Fuses, Motors. Rheostats, Starters, Switches, Wire--new and used. ..... .. ... ___ Furniture: Office and Hotel Furniture and Equipment, Typewriters and Business Machines--used . Machinery and Equipment: All kinds--new and used Automotive (Cars and Trucks). Factory Trucks and Railroad Equipment . Boilers, Engines, Turbines and Steam Power Equip ment Centrifuges, Filters and Dust Collectors Compressors (Air and Refrigeration) and Pumps Construction Equipment (Cranes. Tractors and Mis cellaneous Heavy Equipment) Drives Drying Equipment . Electrical Equipment (miscellaneous) and Trans formers Fans, Blowers, Exhausters and Ventilators Heaters, Condensers, Exchangers and Coolers Hoists, Lifts and Conveyors Instruments and Metering Equipment Machine Tools and Shop Equipment Mills, Grinders, Crushers, Mixers and Cutters Motors, Gear Motors, Motor Reducers and M.G. Sets Office, Laboratory and Change House Equipment Safety and Fire Protection Equipment Scales Spare Parts Tanks, Kettles, Pressure Vessels, Stills and Columns Textile Equipment Vibrators, Shakers and Feeders Metal Scrap--Ferrous and Nonferrous: Aluminum, Brass, Bronze, Copper, Iron, Lead, Monel, Nickel, Stainless Steel, Steel, Tin, Zinc Mill Supplies: General Industrial Maintenance Materials--new and used Paper Stock, Cloth and Rags: Fabrics, Rags, Paper, Rope Scrap and Used Filter Cloth Pipe, Valves and Fittings: All kinds--new and used Residues and Sludges: By-Products of All Descriptions; Recovered Acids, Solvents, Salts, Lime, Cinders, Graphite, Metallic Residues Specialties: Spools, Bobbins, Pirns and Cones; Experimental lots and seconds of some Company products; Rubber; Plastics Stainless Steel: Shapes, Pipe, Sheets, Valves--new and used Steel Products: Structural, Bars, Plates, Shafting, Sheets, Rails, Cable --new and used 103 DUP210011460