Document dnQ210p62k1ndGjnxQnEVKy59

JP4EE Annex 4 rev List B of EEE Functions needing PFAS List of the functions and properties necessary to electrical and electronic equipment (EEE), which need PFAS materials to attain required performances. Functions and properties required for EEE Characteristic of parts and materials to achieve their functions and properties of EEE Performance requirements for materials (PFAS) (e.g.) Specific parts or components that accomplish the functions or characteristic of EEE (e.g.) Typical EEE As of 22 September 2023 Necessary applications of PFAS to attain the functions and properties (Linked with Column E of revised JP4EE Annex 3) 1 Optical function No interference of light transmission (Transparency) Low refractive index, High transmissivity + Water and oil repellency, Flexibility, Flame retardancy Optical fiber, Optical Lens, LED, Monitor/Panel, Fiberglass, Optical adhesive, Protective coating material, Anti-reflective material, etc. Camera, Lighting, Monitor/Panel, Optical cable, Smartphone, etc. Other products in RoHS categories 1- 11 would need this function if they use optical function in control panels for example. 2) Optical elements. 5) Optical elements for LCD panels. 25) Transparent electronic circuit board and circuit. 27) Optical elements. 29) Functional coatings. 2 High speed function communication and transmission Low transmission loss at high frequencies and wide frequency range Low dielectric constant and Low transmission loss + Water and oil repellency, Flame retardancy Printed circuit boards (Smartphone, PC, Base stations, etc.), Antenna, Cable for High-frequency, Protective coating material, etc. Smartphone, PC, Antenna, Base stations, etc. Other products in RoHS categories 1- 11 would need this function if they use communication function to operate or update it for example. 6) Electronic circuit boards for high-frequency applications. 29) Functional coatings. Piezoelectric function (Conversion/Inversion between the mechanical 3 pRowefeerratondseepleacrtartiecaslhveoelttage) "3. Piezoelectric function" for functional explanation. Piezoelectricity (pressure-sensitive detection) and good workability and durability High Piezoelectricity (High piezoelectric coefficient) + Heat resistance, Flexibility Speaker, Touch panel, Sensor, Actuator, etc. Touch panel, Speaker, Various sensor, etc. Other products in RoHS categories 1- 11 would need this function if they use touch panels or sounds for example. 3) Piezoelectric elements Sliding function in mechanical section 4 Refer to separate sheet Lubricity and abrasion resistance, Elasticity, Low water absorption, Low "4. Sliding function" for functional explanation. moisture permeability Lubricity, Abrasion resistance, Machineability + Flame retardancy, Durability, Low water absorption, Low moisture permeability Sliding parts in mechanical section (Bearing, Gear, Roll), Seal material (Packing, O-ring, etc.), Grease, Lubricant, Protective coating material, Epilame, Sealing material, etc. Motor, Printer, Industrial equipment, Camera, Display, etc. All the EEE in RoHS categories 1- 11 would need this function. 1) Sliding elements in mechanical section. 8) High performance materials for mold release and protection purposes used in the article molding process. 11) Hermetic sealant requiring low percentage of the compression set as well as simultaneously other functions such as excellent elongation followability, durability, flame resistance, heat and hot water resistance, low water absorption, low moisture permeability, chemical resistance and/or low outgassing. 29) Functional coatings. 30) Lubricants where the use takes place under harsh conditions or the use is needed for safe and intended functioning and/or safety of equipment. 5 Display function(Liquid crystal display / LCD) Low voltage drive and fast response (Low anisotropic refractive index and low viscosity) Low anisotropic refractive index, Low viscosity, Low voltage drive + Heat resistance, Durability Liquid crystal panel (TV, various monitor), etc. Liquid crystal display panel (TV, Monitor for various device), etc. Other products in RoHS categories 1- 11 would need this function if they use control panels or monitors for example. 26) Liquid crystal display (LCD) elements. 6 Safety and safety functions 7 Functional surface Electrical insulation and flame retardancy, Chemical resistance, Heat resistance, Durability, Dripping prevention Low dielectric constant, Flame retardancy, Machineability, Chemical resistance + Heat resistance, Durability Cable, Pipe/Tube, Package, Seal material, Enclosure, Encapsulation, Protective coating material, Sealing material, Protection tube, etc. Cable, Monitor, Medical equipment, Electric appliance, Industrial control equipment, Printer, etc. All the EEE in categories 1- 11 would need this function. 4) Insulating material requiring flame-retardancy and/or heat-resistant, where the use is needed for safe functioning and safety of equipment. 7) Anti-dripping agent used for safety and to enhance flame retardancy. 8) High performance materials for mold release and protection purposes used in the article molding process. 10) Film, sheet or membrane requiring surface performance which ensures multiple functions such as electrical insulation property, chemical resistance, heat resistance, flame resistance, flex resistance and excellent elongation followability at the same time. 12) Fluid tubes and containers requiring chemical resistance, high cleanliness. 16) High performance materials for mold release and protection purposes, which ensures multiple functions such as electrical insulation, heat resistance, chemical resistance or flame resistance, etc. at the same time. 29) Functional coatings. 30) Lubricants where the use takes place under harsh conditions or the use is needed for safe and intended functioning and/or safety of equipment. Releasability and Heat resistance, UV protection, Antifouling, Waterproof Water and oil repellency, Heat resistance, Weather resistance Releasing and Protective coating material, Film, etc. Cooking appliance, Touch panel, Smartphone, Printer, etc. All the EEE in RoHS categories 1- 11 would this function. 8) High performance materials for mold release and protection purposes used in the article molding process. 10) Film, sheet or membrane requiring surface performance which ensures multiple functions such as electrical insulation property, chemical resistance, heat resistance, flame resistance, flex resistance and excellent elongation followability at the same time. 16) High performance materials for mold release and protection purposes, which ensures multiple functions such as electrical insulation, heat resistance, chemical resistance or flame resistance, etc. at the same time. 29) Functional coatings. 8 Semiconductor Photoacid Generators (PAG) , Surfactants, anisotropic/isotropic etching and protective layer formation, low dielectric constants, high thermostability, chemical inertness (to acids, bases, and solvents), and low moisture absorption, low electric permittivity /dielectric loss, low water absorption, and low coefficient of thermal expansion(CTE), In heat transfer fluid uses, electrically non-conducive, and usability in very broad temperature range, and non-corrosive in closed-loop systems Photoacid Generators (PAG) , Surfactants, anisotropic/isotropic etching and protective layer formation, low dielectric constants, high thermostability, chemical inertness (to acids, bases, and solvents), and low moisture absorption, low electric permittivity /dielectric loss, low water absorption, and low coefficient of thermal expansion(CTE), In heat transfer fluid uses, electrically non-conducive, and usability in very broad temperature range, and non-corrosive in closed-loop systems Photolithography and thin films formed thereby, dry cleaning, heat transfer fluids, resins, manufacturing materials etching, equipment All the EEE in RoHS categories 1- 11 would use semiconductors. 13) PFAS used for semiconductor manufacturing process, semiconductor manufacturing equipment, and semiconductor. 17) Semiconductor manufacturing process. 21) Refrigerant, coolant, cleaning agent and solvent used for semiconductor process. 23) Chemicals for ultra-fine processing applications, as typified by semiconductor and MEMS manufacturing processes. 9 Thin-film device manufacturing process Semiconductor manufacturing process and similar microfabrication process Refer to item 8. Semiconductor Refer to item 8. Semiconductor Thin-film device such as MEMS(Sensor, Gyroscope, Inkjet head), SAW filter, Angular velocity sensor, Moisture sensitive membrane, Capacitor, Resistor, etc. Car navigation system, Sphygmomanometer (blood pressure meters), Inkjet printer, Smartphone, PC, etc. Other products in RoHS categories 1- 11 may use thin-film device. 14) PFAS used for thin-film device (Micro Electro Mechanical System/MEMS, SAW device, Capacitor, etc) manufacturing process, thin-film device manufacturing equipment, and thin-film device. 18) Thin-film device (Micro Electro Mechanical Systems/MEMS, SAW, Capacitor, etc) manufacturing process. 22) Refrigerant, coolant, cleaning agent and solvent used for thin-film device (Micro Electro Mechanical Systems/MEMS, SAW etc.) process. 23) Chemicals for ultra-fine processing applications, as typified by semiconductor and MEMS manufacturing processes. 10 Energy supply (Battery) 11 Cooling function (Refrigerant) Refer to Energy section Refer to Fluorinated gases section Battery Refrigerant Note: "Functional material used in printing process" (No.15, 19, 28 in JP4EE Annex 3) is separately covered by the input from the related industries, such as Japan Business Machine and Information System Industries Association (JBMIA), for the concrete details, and is not included in the above table. Note 2: The function needing "Fluids for immersion processes (testing, measuring or adding function) in production processes and laboratories (No.24 in JP4EE Annex 3)" is not listed in Column C of JP4EE Annex 4 but in Column C of JP4EE Annex 7, under "1. Immersion process". All the EEE in RoHS categories 1- 11 would use batteries. All the EEE in RoHS categories 1- 11 would use refrigerant 9) Batteries. 20) Refrigerant used in various appliances such as those for Refrigeration, Air Conditioning and Heat Pump (RACHP) products. 3. Piezoelectric function 1) Piezoelectric effect: Convert mechanical power into electri Mechanical power Elgeecnterriactiitoyn Ha mPaiteezroielaelctric = (Made of PFAS) Electrica:signal @ 2) Inverse piezoelectric effect: Convert electrical voltage into power(Expansion and Contraction) Piezoelectric material (Made of PPAS) Sheet Electrical signal--Oscillation(S "t; Cr) 0 ---- ---- Electrical voltage, Electrical voltage iccaall vvoollttaaggee mmeecchhaannicicaall oouunndd)) 4. Sliding function 1) Lubrication improvement (Sliding part) Ben0 n ras) Lu(bGrriecasaentvith PFAS) F(luaocr 2) Seal improvement (Sliding part) Sliekaelipnagckpianrgt eotfcbearing (Made of PFAS) 3) Seal improvem: o | -- O-ring (e.g) Compressor Fprloupoerrotpioelsy,maerres,sowhmiecthimheasveuseexdceflolrenctonsteaailnienrgs. oioeppooolflyym PmAeerSr )ggeeaarr le of PFAS) eenntt ((FFiixxeedd ppaarrtt)) l((MMaaddee ooff PPFFAASS))