Document dnGr9aME5rmLJpeynLEx47ErQ

Revised. Page 1 of 3 CORPORATION MATERIAL SAFETY DATA SHEET May be used to comply with OSHA's Hazard Communication Standard 29 CFR 1910, 1200. Standard must be consulted for specific requirements. The product identity on this page meets the OSHA definition of an article and is exempt from the Hazard Communication Standard as to all normally careful uses. Some potential may exist for exposure to dust. The ingredients in these products are resin-bonded and hazards normally associated with contact to pure dusts of the listed ingredients should not be significant. Abex has listed all of the essential ingredients present in a series of products of this general description. All products identified on this MSDS contain asbestos-free material but will not contain all of the other materials shown. The recommended exposure limits are those for the most hazardous substance in a class of substances. Exact formulation is considered proprietary and confidential. Precise product information will not be disclosed, other than to a health professional in accordance with the regulations, without an approved Secrecy Agreement. The information herein is believed to be accurate, however, Abex makes no representation or warranty as to its accuracy. This data is furnished gratuitously and independently of any sale of the product, and only for customer investigation and independent verification. Abex shall in no event be responsible for any damages of whatever nature directly or indirectly resulting from the publication or use of or reliance upon data contained nerein. No express or implied warranty of any kind, including warranties of merchantability or fitness for use, with respect to the product or to the data herein is made hereunder. IDENTITY (As Used on Label and List) 931-(66, S3, 162&162A), 987-6. 3027-(73,85&88), 303-67, 3041-29, ABEX (647GG, 697EE, 68SFF, 6009FF, 6000GG, 6008FF. 6014FF, 6011FF), ABB (281GG, 294EE, 282FF, 296GG, 2003FF, 2010FF, 2007FF, 2005FF), COM (371GG, 383EE, 372FF, 395FF, 385GG, 392FF, 3000FF, 397FF) SECTION I Manufacturer's Name: ABEX CORPORATION Friction Products Division Address: (Number, Street, City, State, Zip Code) 2410 Papermiil Road, P.O. Box 3250 Winchester, VA. 22601 Emergency Telephone Number (703) 662-3842 Telephone Number for Information (703) 662-3871 Date Prepared November 12,1985 PreParer M. K. Leung SECTION II - Hazardous Ingredients/Identity Information Hazardous Components (Specific ChemicalIdentity: Common Namefs) OSHA PEL Glass Fiber Silica, Silicate, Tripoli, Talc Carbon Black, Graphite, Coal, Coke Phenolic and Cashew Compounds Wood Flour and Other Fillers Iron, Zinc, Aluminum, Brass and their Oxides 10.0 mg/M3 0.1 mg/M3 2.0 mg/M3 5.0 mg/M3 1.0 mg/M3 10.0 mg/M3 ACGIH TLV 10.0 mg/M3 0.1 mg/M3 2.0 mg/M3 5.0 mg/M3 1.0 mg/M3 10.0 mg/M3 Boiling Point Vapor Pressure (mm Hg.) Vapor Density (Air 11 Solubility in Water ^ Appearance and Odor SECTION III - Physical / Chemical Characteristics NA Specific Gravity (H,0 -1| NA Melting Point NA Evaporation Rate (Butyl Acetate 11 1.5-3.5 NA 0 Odor_ Qart( Qrey Color wamer 5BC-23-000032 Form #4 SCF-ABEX-2875 Flash.Point (Method Used) ^ SECTION IV - Fire and Explosion Hazard Data Flammable Limits ^ ILEL Extinguishing Media Water A g w C) Special Fite Fighting Procedures M|( Unusual Fire and Explosion Hazards ^ Page 2 of 3 DEL Stsbility Unstable SECTION V - Reactivity Data Conditions lo Avoid ^ Stable Incompatabllity (Materials to Avoid) ^ X Hazardous Decomposition or Byproducts Hazardous Polymerization May Occur Will Not Occur Incomplete combustion will create carbon monoxide and dioxide. Conditions to Avoid ^ X Routefs) of Entry: SECTION VI - Health Hazard Data Inhalation? Skin? Ingestion? Health Hazards (Acute and Chronic) Some persons may be sensitive to cashew resins and develop dermatltls-type problems. Dust of glass fiber, silica, talc, graphite, cartoon black, and coal can produce pneumoconiosis and other lung damage. Metal dusts can be Irritants of the eyes and upper respiratory system. There is little evidence of chronic Industrial poisoning from Iron, aluminum, and zinc dusts. Carcinogenicity: NTP? -- IARC Monographs? -- OSHA Regulated? NO Signs and Symptoms of Exposure Cashew Resins -- skin eruptions similar In appearance to poison ivy. Pneumoconiosis -- coughing, wheezing, shortness of breath, Impaired pulmonary function. Dusts in eye may cause Irritation. Gastrointestinal disturbances possible from Ingestion. Glass fiber may create transient mechanical irritation of the skin of some persons. Medical Conditions Generally Aggravated by Exposure Emergency and First Aid Procedures Should not be necessary from reasonable handling of this product Warner SBC-2J-000033 Form #4 SECTION VII - Precautions for Safe Handling and Use Steps to Be Taken In Case Material Is Released or Spilled Grinding, drilling, milling, etc. can result in the release of airborne dust. Measures as outlined in Section VIII should be followed If this occurs. Waste Disposal Method Hazardous ingredients: 40 CFR, Part 261, 262 and applicable State and Local regulations. Other Precautions ' Pre-employment screening for allergies and histories of skin sensitivities may be beneficial in determining persons sensitive to cashew materials. . SECTION VIII Control Measures Respiratory Protection (Specify Type! niqsh approved for pneumoconiosis -fibrosis producing dusts and dustswith TLVnot less than 0.05 mg/M3. Ventilation Local Exhaust F()r dU8, exposijres exceeding TLV. Mechanical (General) Not recommended for dust exposures. Special , Protective Cloves Recommended. othel Barrier creams for persons with skin sensitlvie to cashew resins and fiber glass. Eye Protection Should not be needed for normal handling of product. Eye protection is good practice where dust Is propelled by grinding or drilling activities. Other Protective Clothing or Equipment Long sleeved shirts or other protective clothing may be beneficial to prevent skin contact of persons sensitive to cashew resins and fiber glass. Work/Hygienic Practices ! Employees should be properly instructed in the use of control measures as Indicated above when there is a need for It. If dust from this product is produced, unnecessary exposures should be avoided by using a vacuum in place of dry brooming. Use wet method of cleaning for other surfaces. Proper and adequate personal hygiene should be practiced by exposed workers. NA - Not Available NK - Not Known wsiss Warner SBC-23-000054 Form #4