Document dDRQq1zQ5Z8ay23jebOEJ7mG9

PLAINTIFF'S.EXHIBIT December 8, 1967 NEW FORMULA CHICAGO. ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-974-Y (HAXD TOOLS) ('READY MIX "X") DESCRIPTION OF PRODUCT - Yellow Ready Mixed Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Sourc'e % Act. Ingr. Lbs./Batch Water Naico 71-D5 Fil.er C-971 Elvacet 81-900 Benzoflex 50 Yellow Oxide i/2087 Chicago Plant Nalco Chemical Co. Chicago Plant DuPont Tennessee Products Chem. C. K. Williams Co. 0.10 91.315 8.00 0.50 .0S5 j.00. GOO 416.5 (50 gal.)* 0.8 700.0 61.5 4.0 i. u 1 IS3.8** -'Approximately 54.3 lb./lOO lbs. of active ingredients (this may very + 2 gallons per batch). **0ne batch yields 18-5 gallon pails of Ready Mix Joint Compount at 65..6 lbs./pail. TESTING PROCEDURE WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 c.c. water per 15C gr:....s of paste may be added to adjust. Brabender - 440 + 30 WORKING PROPERTIES - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery, working, and free of any coarse, gritty, or undispersed particles. Plaster snail be free from lumps due to incom plete mixing. BONDING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 35. After compound has uried, tape shall show at least 757, fiber tear when delaminated. CRACK RESISTANCE Specifications: Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications: Yellow Dried compound shall match color of standard sample. SGP 0017793 Pl May 8, 1968 Supersedes Formula No. C-974-Y Dated 2/28/68 . CHICAGO. ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-974-Y (HAND TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT - Yellow Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Function R.M. Spec. Percent Lbs./Batch Water Filler C-97l Elvacet 81->00 - (Poly Vir.y . Acetate Emulsion) Benzoflex 50 Yellow Oxide 2087 v Solvent Body Adhesive Plasticizer Pigment - - 1112.0 (133.4 gal 91.32 1946.0 185 8.03 171.0 183 0.52 11.1 139 0.13 2.8 100.00 3242.9** *Approximately 54.3 lbs./lOO lbs. of active ingredients (this may vary + 2 gallons per batoh). **One batch yields 50 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender - 540 + 20 WORKING PRCERTIES Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing. BONDING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated. CRACK RESISTANCE Specifications Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications Yellow Dried compound shall match color of standard sample. -/ Denotes change in this reissue. RRBikkt SGP 0017794 July 3U, 1968 Supersedes Formula Mo. C-974Dated 5/8/68 CHICAGO. ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-974-Y (HAND TOOLS) (READY MIX "X"l DESCRIPTION OF PRODUCT - Yellow Ready Mix Joint Compound used for taping, coverir tape, filling cornerbead and spotting nails. FORMULA Raw Material Function R.M. Spec. Percent Lbs./Bate Water Filler C-971 Elvacet 81-900- (Poly Vinyl Acetate Emulsion) Benzoflex 50 Yellow Oxide 2087 Solvent Body Adhesive Plasticizer Pigment - - 1000.0 (120 gal. 91.32 1750.0 185 8.03 153.0 183 0.52 10.0 139 0.13 1.6 100.00 2914.6* *Approximately 54.3 lbs./lOO lbs. of active ingredients (this may vary + 5 gallons per batch). **One batch yields 45 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender - 580 + 20 The Harter Co., Omaha Nebraska 600 + 20 WORKING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall bt free from lumps due to incomplete mixing. BONDING PROPERTIES Specifications; Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fibei tear when delaminated. CRACK RESISTANCE Specifications Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications Yellow Dried compound shall match color of standard sample. -/ Denotes change in this reissue. RRBzkgc SGP 0017795 September 13, 1968 Supersedes Formula No. C-S74-Y Dated 7/30/68 ' CHICAGO. ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-974-Y (HAND TOOLS) (READY MIX 'T') DESCRIPTION OF PRODUCT - Yellow Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Function R.M. Spec., Percent Lbs./Batch Water Filler C-971 Elvacet 81-900 - (Poly Vinyl Acetate Emulsion) Benzoflex 50 Yellow Oxide 2087 Solvent* Body Adhesive Plasticizer Pigm ent - 1C00.0 (120 gal.)* - 91.32 1750.0 185 8.03 153.0 183 0.52 10.0 139 0.13 1>6** 100.00 2914.. 6*' Approximately 54.3 lbs./lOO lbs. of active ingredients (this may vary + 5 gallons per batch). **One batch yields 45. (+) - 5 gallon pails of Ready Mix Jdint Compound at 65.6 lbs./pail. "/ WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender - 580 + 20 WORKING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 33.. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. . Material shall be free from lumps due to incomplete mixing. BONDING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE Specifications: Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications: Yellow Dried compound shall match color of standard sample. Li -/ Denotes change in this reissue. RRB:kgc A SGP 0017796 May 27, 1970 Supersedes Formula No. C-974-Y Dated 9/13/68 CHICAGO. ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-974-Y (HAND TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT Yellow Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting nails, -/ FORMULA Raw Material Func tion R.M.Spec. Percent Lbs/Batch Water Filler C-971 Elvacet 81-900 (Poly Vinyl Acetate Emulsion) Benzoflex 50 Yellow Oxide 2087 Solvent Body Adhesive Plasticizer Pigment " 185 183 139 91.87 1000.0 (120 gal.)* 1750.0 7.50 .50 .13 100.00 142.5 9.5 1.6 2903.6** Approximately 54.3 lbs/100 lbs. of active ingredients (this may vary + 5 gallons per batch). ** One batch yeilds 45 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs/pail. WORKING CONSISTENCY: Specifications for Paste: Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maxi mum of 5cc water per 150 grams of paste may be added to adjust. Brabender - 580 + 20 WORKING PROPERTIES: Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing. BONDING PROPERTIES: Specifications: Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757, fiber tear when delaminated. CRACK RESISTANCE Specifications: Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no -cracks in the thinner half of the wedge. COLOR: Specifications: Yellow Dried compound shall match color of standard sample. -/ Denotes change-in this reissue. EDO:d ek SGP 0017797 > C/3 co P3 t/3 Ho n as o C/3 oo O O z H S* **3 O 3 Z O o ='<O*1t o c! O H C/3 SGP 0017792