Document bywov6rzEoKD0kaBzNGwbkRv6

SECTION VII - Precautions for Safe Handling and Use Steps to Be Taken In Case Material Is Released or Spilled Grinding, drilling, milling, etc. can result in the release of airborne dust. Measures as outlined in Section VIII should be followed If this occurs. Waste Disposal Method Hazardous ingredients: 40 CFR, Part 261, 262 and applicable State and Local regulations. Other Precautions Pre-employment screening for allergies and histories of skin sensitivities may be beneficial in determining persons sensitive to cashew materials. SECTION VIII Control Measures Respiratory Protection (Specify Type! niqsh approved for pneumoconiosis -fibrosis producing dusts and dustswith TLVnot less than 0.05 mg/M3. Ventilation Local Exhaust F()r dU8, exposijres exceeding TLV. Mechanical (General) Not recommended for dust exposures. Special Protective Cloves Recommended. othel Barrier creams for persons with skin sensitlvie to cashew resins and fiber glass. Eye Protection Should not be needed for normal handling of product. Eye protection is good practice where dust Is propelled by grinding or drilling activities. Other Protective Clothing or Equipment Long sleeved shirts or other protective clothing may be beneficial to prevent skin contact of persons sensitive to cashew resins and fiber glass. Work/Hygienic Practices ! Employees should be properly instructed in the use of control measures as Indicated above when there is a need for It. If dust from this product is produced, unnecessary exposures should be avoided by using a vacuum in place of dry brooming. Use wet method of cleaning for other surfaces. Proper and adequate personal hygiene should be practiced by exposed workers. NA - Not Available NK - Not Known wsiss Warner SBC-23-000054 Form #4