Document bypYrXZ0pM0yOdnj35KQ8v6g3

THERMINOL'66 HEAT TRANSFER FLUID ... for use in liquid phase between 0-650F without system pressurization TECHNICAL BULLETIN (T-66) FLUIDS I "Nothing contained heifin is to be construed es a lecommendelion to use any pioducl in contlul with any patent. MONSANTO MAKES NO WARRANTIES AS TO THE TITNE SS OR M[ RCH/yU ABI . t ITT 01 ANY PRODUCTS Rtf ERRID 10, no goaranlee ol satisladoiy results `rom reliance upon contained hlormalion or lecommendations, end disclaims all liability lor any resulting loss Organic Division/800 N. Lindbergh Blvd./St. Louis. Missouri 63166 0592755 TOWOLDMON0037355 WATER_PCB-00021824 Introducing Therminol 66 Thenninol 66 is a heat transfer fluid for use in liquid phase between 0-650F without system pressurization. The low pour point of this product permits start up at fluid temperatures as low as 0K. To minimize fluid oxidation, systems with Therminol 66 should be blanketed with an inert atmosphoro. A system relief valve should also be provided. Thenninol 66 is ideally suited to replace organic fluids that have lower boiling points and must operate under system pressure at 650F. Thenninol 66 can support combustion and should not be confused with Monsanto's Therminol FR fire-resistant fluids. TYPICAL PROPERTIES OF THERMINOL 66 Composition Appearance Color Odor Pour Point Flash Point Flame Point Autoignition Temp. Coefficient of Expansion Boiling Range Modified terphenyls Oily liquid Practically colorless Faint, characteristic -26---- 28C. 168 -- 180C. 334 -- 356F. 190 -- 2C2C. 374 -- 392F. 364C. 705f. 0.000741 cc/cc/C. 340 -- 396C 644- 745F 0592756 TOWOLDMON0037356 WATER_PCB-00021825 TOWOLDMON0037357 WATER_PCB-00021826 SPECIFIC HEAT. BTU HR. (*F) SPECIFIC HEAT TEMPERATURE, F KINEMATIC VISCOSITIES KINEMATIC VISCOSITY, CENTISTOKES j TEMPERATURE, 5F 0592758 TOWOLDMON0037358 WATER_PCB-00021827