Document byEmB97JJxM5RneBOn5OEK6ey

INDEX (Classified) Page ALUMINUM PAINT....................................................... . 28-24 JAPALAC PRODUCTS.................................................. 20-21 ASPHALT PRODUCTS....................................................... 26 AUTO FINISHES..............................................................-- 22 BARN AND ROOF PAINTS........................................... 11 COLORS IN OIL.................................................................... 26 ENAMELS AND UNDERCOATERS............................... 13-14 EXTERIOR HOUSE PAINTS............................................ 4-6-6-7 FLOOR PAINTS..................................................................... 8 GLID-N SPECIALTIES....................................................... 28-29 METAL PROTECTIVE PAINTS.............................. 11-12-18 MISCELLANEOUS PRODUCTS A SPECIALTIES.... 24-25 PRIMER-SEALER.................................................................... 27 REFLECTOLITE.............................................................. 27 SPRED.............................................................................. 27 STAINS, FILLERS. REMOVERS............................... 19-20 TRUCK, TRACTOR * MACHINERY ENAMEL____ 22 VARNISHES................................................................ 18-16-17-18 WALL FINISHES............................................................ 84 Product Pag* A Ad-El-Ite Non-Inflammable Paint and Varnish Remover 19 Ad-El-Ite Paint and Varnish Remover 19 Ad-El-Ite Put* Wax........................ 24 Aluminum Paint--Japalac________ 21 Aapbait Aluminum Roof Coating__ 24 Asphaitum Varnish, Black________ 17 Automobile Enamel_____ 22 Automobile Polish--Glid-N ............... 29 INDEX (Itemized) Product Pops Gljd-Seal............................................ 18 Giidtite, Galvanized Iron Primer___ 12 Ghdtone Stains___________ _________ 20 Gloss Wall Finish................................. 9 Graining Specialties--Japalac. 21 Greens (Trim and Trellis)........... . 6 House Paint Primer--Baaeooat_____ 6 Household Insecticide--GUd-N.____ 28 B Bar and Table Top Varoiah__________ 15 Barn Paint, Endurance 11 Basecoat--Endurance Exterior_____ 6 Baaecoat-Speedwell Interior----------- 9 Blade Aaphaltum_________________ 17 Blackboard Slating______ 28 Bleach (Wood)....................................... 26 Bronaes--Japalac------------------------------ 21 Bronzing Liquid--Superior.................. 17 Broth Restorer______ __________ I Interior Varnish_____ Iron Primer................ 16 12 J Japalac................................................20-21 Japan Drier.._____________________ 17 Japepar--Varnish 18 29 K C Knot Sealer 6 Cement Coating and Mixing Liquid . Chromatiaed Metal Primer_________ Colon in Oil___________ Concrete Paint (See PH-Namd)_____ Creosote Paint_______________ 6 12 26 8 7 D D.D.T. Insecticide -Glid-N............... Decorator Colors_____ 27 Drier, Japan----------------Driwal......... ......................................... 28 17 7 L Lik-A-Rub-Varnish............................ Linoleum--Stick Lacquer......... . Linoleum Varnish_________________ Liquid Cement Coating and Cement Costing Mixing Liquid........ Liquid Cleaner-- GUd-N . _ Liquid Red Lead.................................. Liquid Wax-Glid-N........................... 16 24 16 6 28 IS 28 E Enamel--Japalac________________ 20-21 Endurance Prepared House Paint... 4 Endurance Imperial House Paint___ 4 Endurance Shingle Stain...._______ 7 Endurance White Semi-Paste_______ 7 Ereron House Paint ........... ............ 4 P Filler*............................................ Flat Wall Finish__ ________________ Floor Varnish15-16-17 Floor Wax...................................... Florenamel___________ ............ Floorette- Varnish 16-16 Furniture Polish--GUd-N 29 19 8 28 8 Galvanized Iron Primer................... Glazing Liquid...................................... Glid-N Specialties 28-29 Gttddsneoat...................................... GUddenspar Varnish_______________ 12 10 14 15 Masticrete.......................... Masticrete Primer.___________ Meta) Prlnor......................... Metallite, Interior and Exterior Mfldew-X..................................... 26 26 11 28 29 N Nev-A Rot....... ............ 28 Nev-A-Rust........................................... 11 O Ofl Colon in Tubae.............................. 26 Oil Flnrt Coster....... .......... 9 P Paint and Varnish Remover............ 19 Painters' Floor Vanish................... IT Paste Wood Filler................................. 19 Penetrex. ................... 18 Pli-Namel.................... 8 Porch and Deck Paint (See Floronamel) 8 Pine Colon in Oil............................... 26 Primer-Sealer Spied............................. 27 Product B ideote--Vanish...... Lead. linuid_______ Reflect-O-Lite Paste Paint Ripotia................................. Roekapar--Varnish______ Roof Paint_________ _____ Pops 16 13 27 . 18 17 24 8 Screen Enamsl-Jspslac................. 21 Seelette.......... 10 Semi-Gk Wall Finish........................... 9 Shellac............. ............................. 19 Shingis Stain_____ _____________ 7 Slick Linoleum Coating..... ............... 24 Smoke Stack Black...____ ________ 13 Spesdenamel......____________... 22 Snadene..................................... .. 14 Speedoleum-Vanish.......................... 16 Speed-Wall Flat...................... 8 Speed-Wall Gloss.................................. 9 Speed-Wall Interior Baseeoat............. 9 Speed-Wall Semi-Gloes........................ 9 Spied Flat.................................. 27 Spied Luster..................................... 27 Spred Primer-Sealer_______.-......... . 27 Spied Satin___________ 27 Stove and Iron Enamel.............-- 21 Surfaeene..........._.....___ -__28 Superior Spedene Enamel... 14 T Tinner*1 Paints. ................. Titan-O-Zinc Outride White....... Utan-O-Zlne Paste Paint................. Touch-Up Black__________ ____ Trim and Trellis Colon............... -- Truck, Tractor and Ms - inery Enamel_______________________ Tube Colon_______________ ...... 11 6 6 22 6 22 26 V Vapor Barrier............................ ........ Vanish Remover................. Vanish 8tain--Japidac............ Velvet Floor Varnish______--..... Vtamatic Green Chalkboard Coating. 27 19 29 18 28 W White Creosote Paint...... T Wood Bleach___.................. 21 Wood Stains_________ ___________ 29 Z Zinc Dust Paint.. ............. 12 Zhie-O-Lith............................................ 6 GLD0Z5431 * nj***-* EXTERIOR HOUSE PAINTS en d u r an c e pr epar ed h o u s e pain t Tw4 of Product--A high quality paint ready to use for the exterior of houses andl other exterior surfaci es. The ingredients are the finest n nfomantand oil combination to produce self cleaning properties and durability. Endurance is madie in White. Black and twelve colon -- XvoryBeige, Cottage Brown, Cream White, Colonial Yellow, Crylight Green, Shadow White, Cream, Toobbacco Brown, Light Gray, Medium Cray,*Thistle Green. Prying Tints-Si bours-48 hours for recoating. Courage--Apply 'at a spreading rate of 550 square feet per gallon. Application--Stir thoroughly before using. - Old Painted Surfaces-- Remove loose paint, scales, blisters and dirt Surface must be dry. All bare wood should receive a coat of Base Coat or paint reduced aa for new surfaces. Second Coat--Add small amount of turpentine. Third Coat--Apply paint as received, full body. Utm VnpainUd Surfaess--Use Endurance Base Coat tor priming. If not available proceed as follows: For yellow pine or cypress, add 1 pint raw linseed oil and two pints turpentine to a gallon of paint For white pine, fir and soft woods, add 1 quart raw linseed ou ana 1 pint turpentine to a gallon of paint Allow to dry three days or longer. Second Coat--Add one pint turpentine to a gallon of paint. Allow to dry three days or longer. Third Coat-Use paint as received, if too heavy, add equal amounts of linseed oil and turpentine to produce desired body. Outside and Inside Flat White____\ Begnlar Shades and Black.......J Crylight Green 5's per gaL l'seaeh Vi's each ENDURANCE IMPERIAL HOUSE PAINT *s Type if Product--An exceptionally high grade finish for exterior surfaces. Formulated from the highest grade materials available to give One Coat coverage for repaint work when the surface to be recoated is in good condition for repainting. Drying Tim*--24 hours. Cooerage--MO square feet per gallon. ' Application--Stir thoroughly with a lifting motion. Do not add thinning oils or other paints to this product. Use as White only. Do not tint. Surfact* Prttknctly Painted-AU loose paint, scales, blisters and dirt should be removed. Make sure surface Is dry. Spot-cost bare places with Glidden Exterior Base Coat No. 1861. If the surface is porous or weathered, apply a coat of Glidden Exterior Base Coat No, 1851 over the entire surface. Allow to dry at least 48 hours under good drying conditions, then apply Endurance Imperial House Faint; full body. Two-Coat -- dm for New UnpairUed Surface*--Prime coat--Use Glidden Exterior Base Coat No. 1861 at a spreading rate of 450 square feet per gaaion. Second Coat--Use Glidden Imperial House Paint as a finish coat without thinning, at a spreading rate of 650 square feet per gallon. White. 6'a per gal. 67.10 i's each 67.20 Vi's each 62.08 EVERON HOUSE PAINT Type of Product-A dependable paint for exterior use where economy is a consideration. This material can also be used inride the home da walls, woodwork, cupboards and many other article*. Drying Time--48 hours. Cossrops--660 square feet per gallon. - AnpUcation--For new exterior work apply at least three coats. The first coat should be reduced with a quart of raw 1bused ofl sad a pt*t of turpentine. In the second coat omit the linseed oil. For tb* third and finishing coat apply Everon House Paint ms received in the container. . - For old exterior work apply two coats, reducing the first coat with a plat of linseed oil sad a plat of turpentine sad apply the second coat full body. Allow each coat at least 48 hours to dry. - Ibr interior woodwork, all surfaces should be' free from dirt and grease_and thoroughly dry. If one coat only la asternary, as* the material full body while if two coats are used thin with a half-pint of turpentine to each gallon. 5's per g*L 64.40 l's each Vs'aeach $140 ThfiPfSte ENDURANCE TRIM AND TRELLIS COLORS Type of Product-A perfect finish for exterior trim on homes, store fronts, pill work, ornamental Iron, trellises, porch furniture, etc. Made in six color* --Colonial Blue, Radio Blue, Chestnut Brown, Shutter Green, Royal Red and Light Yellow. Drying Time-24 hours--48 hours for recosting. Coverage- Approximately 700 to 750 square feet--one coat. A ppiiculum-Stir thoroughly with a lifting motion. Old Painted Surfaces--The surface must be dry and free from dust, dirt and all foreign matter. Loose paint, scales and blister* should be removed. The entire surface should be given one coat of Exterior Base Coat before applying trim colors. Sew Unpointed Surfaces--Use Exterior Base Coat for priming, allowing 48 hours for thorough drying. On a two coat job. Exterior Base Coat can be tinted to approximately the finishing color by the addition of Pure Colors in Oil. For a three coat job the first coat of color applied over the Exterior Base Coat should be reduced with a pint of turpentine to a gallon of paint. The third coat should be applied full body as received. Allow at least 12 hours for thorough drying between coats. Royal Red No. 3- Light Yellow No. 37........................... Shutter Green No. 71...................................... Other Colors........... ......................................... l's each 38.45 Vi's each $2.3* 7.152.05 3.351.85 Vi's each *1.30 1.15 1.05 TIT AN-O-ZINC OUTSIDE WHITE Type of Product-- Made of titanium pigments, pure zinc oxide, specially treated linseed oil with just the right amount of drier. This product cover* and hides better than ordinary paint-one coat is equal to two coats of ordinary material and when applied over a first coat of our Exterior Base Coat produces a perfect two-coat job. It is so formulated that it resists the staining action of copper, iron and lead and to produce a white house that retains its original beauty throughout the life of the paint. This product it lead free, consequently ideally suited for use on the farm because lead bearing paint is injurious to livestock. Ideally adapted for use in congested smoky districts where fumes are prevalent. Drying Time--24 hours--48 hour* or more for recoating. Coterage--700 to 760 *quare feet per gallon--one coat. - A pplication- Stir thoroughly before using. Old Painted Surfaces-- Remove loose paint, scales, blisters and dirt. Surface must be dry. All bare wood should receive a coat of Exterior Basecoat, or paint reduced as for new surfaces. Second Coat--Add small amount of turpentine. Third Coat --Apply paint as received, full body. New Unpointed Surfaces-- Use Exterior Basecoat. If not available, proceed as follows: For yellow pise or cypress, add 1 pint raw '[Meed oil ana two pints turpentine to a gallon of paint. For white pine, fir and soft woods, add 1 quart raw linseed ou and 1 pint turpentine to a gallon of paint. Allow to dry three days or longer. Second Coat-Add one pint turpentine to a gallon of paint. Allow to dry three day* or longer. Third Coat -- Use paint as received, if too heavy, add equal amounts of linseed oil and turpentine. 5's per gaL Tilan-O-Zinc Outside White ........................................... *7.15 l's each *7.25 Vi's each *2.0* ZINC-O-LITH HOUSE PAINT Type of Product--A perfectly balanced formula. The pigments are ground in refined linseed oD and a pale liquid dryer. It is a white that stays white, with a maximum of opacity, easy working qualities ana long life. Drying Time--24 to 28 hours--48 or more lor recoating. Coterage--700 to 750 square feet per gallon--one coat. Application--Stir thoroughly, using a lifting motion. Old Painted Surfaces-Malta sure the surface is dean and dry. All loose paint should be scraped, wirebrushed or burned off before applying paint. First Coat: Add 1 to 2 pints of raw linseed oil ana about 1 pint of turpentine to gallon of paint, depending on condition of surface. Allow three dsya to dry in good weather. Second Coat--Apply paint as it comes from the can. New Unpainted Surfaces--Use Endurance Base Coat for priming. If not available proceed as follows: For Yellow Pine or Cypress, add one quart of raw linseed oil end two to three pints of turpentine to the gallon of paint. For White Pine, Fir or soft woods, add two or three pints of raw linseed oil and one to two pints of turpentine to the gallon of paint. Allow to dry three days in good weather. Second Coat--Use about one pint of turpentine to one gallon of paint. On soft wood add one pint of turpentine and one pint of linseed oil to the gallon of paint. Allow to dry three daya in good weather. Third Coat-- Uae paint aa it cornea in the can untoea paint has thickened somewhat in which case it may be thinned with about on*half pint of raw linseed oil to the gallon. ZlneolUh. 5'a per gaL $5.60 l'a each $5.60 V4' each tliS 5 GLD025433 V. '.v- -BU-MlTOTfP- EXTERIOR BASE COAT Tv* of Product- A scientifically correct primer and lint coater lor both new and old work. Made from specially prepared otla to Drodueetbe elasticity, the adheeion, and to control penetration that ie 10 necessary to exterior paint Jobe. Also an exoellent primer lor asbestos wall sidings, or porous masonry surfaces. Drying Thru-18 to 24 hourt-48 or more for recoating. Coteragt-- 660 to 600 square feet per gallon--one coat. i-mJtsorfoa--Stir the paint thoroughly with a lifting motion. All.surfaoet should, be perfectly dry tad free from all foreign matter. Under normal conditions, Base Coat should be applied without reduction although thinning 10% with turpentine improves working eon* ditions during extremely hot weather. Old Painted Surfact*- Remove loose paint by scraping, wire brushing or burning off where necessary. Be sure the surface is perfectly drv Apply Coat to all sections that have become bared by blistering, scaling or peeling and to the entire surface if the old paint h porous, chalking and badly weathered. Afar Unpointed Surface*-Uto Base Coat full body, without adding any liquid. Two-Coat System--Titan-O-Zine or Endurance House Paint are the specified points to be used without reduction as the mat over Base dost for a specified two-coat job. To secure proper film thickness on a finished two-coat Job, Base Cost should be applied at a spreading rate of about <60 square feet of surface per gallon. The usual three-coat specifications on new work is recommended as it produces longer life. For a two-coat system, it is a good practice to tint the base coat with pure colon in oil to approximate shade of finishing eoat wbto colors other than white are used for tholsst coat. 5 * per gal. l's each % * each Exterior Basoeoat.............................. ................................. *5.35 *5.<6 *1.58 KNOT SEALER Tin* tf Produet-- Approved by Western Pine Association for sealing knots to prevent bleeding and discoloration through succeeding eoatalofpafnt. Also used to seal-Lnbleeding stains. l's each %'s Wee*h Knot Sealer. *5.80 $1.78 fM LIQUID CEMENT COATING Tup* of Product-- Used to make damp-proof and uniform in color, exterior and interior surface of concrete, cement, stucco, unglased tile, bnek and stone, without changing surface texture. Produces a pleasing effect which, in 90 days dulls down and takes on the true appearance of cement and stucco surfaces. Dryint Tim*-lS to 24 hours-48 hours or more for recosting. Cottrof*-- 400 to 600 square feet per gallon. Application--Pour off one-third of the liquid and completely break up and put into thorough suspension the solid matter at the bottom of the package. Replace liquid, stir thoroughly before ana during use. Any surface which shows indications of alkali should receive a wash coat made by dissolving two pounds of zinc sulphate crystals Into a gallon of water. Apply freely and allow to dry thoroughly. Old Painted Surface*-Remove loose paint, touch up bare spots as recommended for prime coat on new work, then apply one eoat of liquid Cement Coating. Nev Unr be applied lib receive a sect uniformly. :*d Surface*--First Coat. To each gallon of liquid Cement Coating add one quart of Cement Mixing liquid. This should y and brushed well into pores. Allow forty-eight hours to dry. Second Coat: Any spots on surface that ahow flat, should . coat. Allow these spots to dry then apply e finish coat of liquid Cement Coating full body. Brush out evenly and 5's per gal. l's each Liquid Cement Coating____________________________........... *5.86 *5.95 CEMENT COATING MIXING LIQUID Type of Product-TU* material is a light colored, transparent drying liquid of about the same gravity as linseed oO and wB) work easily under the brush. When spread in an even thin layer on glam it dries in about eighteen hours, forming a tough, elastic film similar to a Spar Varnish. It is obvious that thinning vehicles such as turpentine or benzine are wboBy unsuited for use where GHddsn Mixing Liquidie specified. Application--Glidden Miring Liquid is used in conjunction with GUdden liquid Cement Coating as a thinning vehicle where its need b indicated, such as first coat work on woodwork; also for use as a priming coat, in conjunction with Gliddtn Iiqfiud Cement Coating; on broken places, and uneven areas la cement surfaces, which are to be brought up to the general level with GUdden Concrete Patching Compound. For these purpose*, it Is mixed with equal parts of GUdden liquid Cement Coating of shade selected, to each gallon of the mixture adding one pint of pure {Spirits of Turpentine. 5's per gal. l's each Mixing Liquid...................................................................................................... ***> $M* GLD025434 \ TITAN.O-ZINC PASTE PAINT Type of Product--Tbit product posseue* unusual durability, more hiding and covering than any othar paint material with which wa arc familiar. Thla paint can be reduced with two gallons of oil and a quart of turpentine for priming coet and a gallon to a gallon and ahalf of ad for finishing coat. This reduction produces the most economical and yet a long wearing paint Bring lead-free, it it ideal for Use on the farm. Drying Time--24 hours. Cottragc-- Reduced as directed it wO! cover 720 square feet of surface per gallon. Application-- Same as for Endurance House Paint S'e per gat Tltan.O-Zlnc Paste Paint.................................................. $7.16 l'a each $7.28 Vi's each ffl.og ENDURANCE WHITE SEMI-PASTE . Tup* of Product-One gallon of this Semi-Paste mixed with one gallon of linseed oil makes two gallons of paint ready for use. It con tains the essential pigments found in Prepared Paints and produces the utmost in long life. Drying Tinu--It to 24 hours. Should not be recoated in leas than 72 hours. Coeerajs--After reducing, coverage it estimated at 700 square feet per gallon. Application--Same aa for Endurance House Paint. Endurance White Semi-Paste. S's per gal. 8M8 l's each 'each 113$ DRIWAL Type of Product-k damp-proofing and stain-proofing material designed for application to limestone, stucco, sandstone, concrete, brick and other porous surfaces. It penetrates the pores of the surface to which it is applied and lines them with an fruNtlbis which makes them fully water-repellent, Does not change texture nor discolor the surface* Contains so pgrsJBsfc Drying Tims--About 2 hours. . Cowrap*--On cement, concrete, stucco and brick approximately 126 to 176 square feet per gallon for first application and from 176 to 226 square feet on second application. On atone-between 176 and 226 square feet per gafioo tor first application and from 226 to 276 square feet per gallon for the second application. Application--Brush or spray. 6'e per gal. Gear..................................................................................................................... $2.70 Heavy Bodied..................................................................................................... 2.00 White................... -.............................................................................................. 5.10 l'e each $230 $4)0 530 ENDURANCES HINGLE STAIN Typ* of Product--Supplies modem, colorful roofs or riding at minimum cost Shingle Stains produce a soft, rich effect on the root and give extra protection. They withstand the severest weather conditions, maintaining their attractive shades without fading or streaking. These Shingle Stains prevent decay, and preserve the life of a wood shingled house. Use to beautify and protect. Drying Timt--24 to 48 hours. Covtragt--Approximately 160 square feet per gallon. Application--By dipping, brush or spray. Stir thoroughly before tiring. Be sure surface ia dean and dry. Old Work--On all old work the shingles must be brushed and particular care should be used to see that all portions, particularly the edges, are well coated. Two coats are recommended. Nnc Work-- The moat practical way to atala shingles is to dip them into a container which wQl accommodate at least a doaan or mote at one time. Then remove them to another receptacle or trough and allow to property drain. This process will afford protection to dl exposed surfaces. For dipping, two gallons of stain will cover about 1000 regulation size shingle* with a H dip. For brushing 160 square feat is a conserva tive estimate. Dark Brown, Msroon and Bed__________ Light Green, Medium Green, Dark Green French Gray, White............................ .......... Contra Bine.................................................... S'apergaL $230 8.45 $.75 4M l'aoach 8S4W Ul 338 430 GLD025435 WHITE CREOSOTE PAINT Type of Produet-- An excellent low cost exterior paint for exterior wood surface*, fence*, barn*, out-houae*, sheds, etc. Adapted particularly for farm use because it is lum-poisonous. Produces a dead flat finish. Ha* a preservative effect on wood. Drying Time--24 hours. Coeerage -- 225-320 square feet per gallon, depending on type of surface. A pplicaiion--Apply by brush or spray. One coat is all that is required. Just as much should be applied to the surface as will give solid covering. For brush application, reduce with H gallon of Mineral Spirits and M gallon of raw linseed oil to the gallon. For better durability us* H raw linseed ou but no mineral spirits. For spray, reduce with the same liquids in proportions that will give free flow of the paint through spray nozzle. White Creosote Paint . S's per gaL *4.30 l*s per $4.40 FLOOR PAINTS FLORENAMEL Type of Product--For either Inside or outside use. Should not be confused with the ordinary line of floor paints as it is distinctly dif ferent. It is especially adapted for finishing old and worn linoleum, new or painted woodwork, furniture, cement and inside or outaido floors and steps. Drying Time--12 hours, 24 or more for recoating. Coverage-- 500-600 square feet per gallon--one coat. Application - Stir enamel well before using. Be sure surface is clean and dry. Remove polishes, wax or grease by washing with turpen tine^ When washing cement with Zinc-Sulphate, allow to dry thoroughly before painting. Inside Floors, Linoleum and Farnffurs-Reduce the first coat 10% with turpentine. Allow to dry overnight, then apply second coat as it comes from the can. Cement Surfaces -- If cement Is new, wash with a solution of two pounds of sine sulphate to a gallon of water to neutralist alkali in cement. Reduce first coat slightly with turpentine. Apply second coat as it comes from can. Porch Floors and Steps--On surfaces previously painted apply one or two coats if desirable. Allow overnight drying between coat*. On new or unpainted surfaces use Exterior Basecoat as priming coat, follow with one or two coat* of Floranamel. Allow two or three days for Basecoat to dry and overnight between coats of Florenarael. Boiled linseed oil may be added 1 pint to a gallon for greater durability. l's each Ail Colors............................................................................................................. $5.60 Vi's each $1.65 PLI-NAMEL Type of Product--A true plastic, the product of a chemical combination known as "Polymerization," which gives it outstanding per formance. It is highly resistant to acids, alkali, moisture, severe fume conditions, oil and grease. It is the perfect finish for concrete noon. Pli-Namel resists water and the action of alkalies in the concrete. It has good resistance to abrasion, good adhesion and is sufficiently hard to resist wear. It is an anti-corrosive, and protects against the deterioration of metal. Drying Time--Sets in 30 minutes and dries firm overnight. Coeeragt--400-600 square feet per gallon--one coat. Application--For Concrete--Remove oil and grease with alkaline cleanser or steam. Then etch with Sani Flush, applying powder to wet floor by shaking it directly from can; or, a solution of one quart muriatic acid and three quarts of water. Flush with clear water to remove any exceea sani flush or acid. Thin first coat Pli-Namel 10% with pure turpentine to increase penetration. Apply aecond coat full body alter first coat Is thoroughly dry. Under good drying conditions allow second coat to dry 48 hours before the floor is subjected to severe wear. For Mr(of--Surface must be dean and dry. Wire brush or chip corroded metal. Apply primer coat of No. 1625 Chromate Primer. This base coat will insure good adhesion; allow to dry before applying Pli-Namel. Then apply Pli-Namel full body. Do not use Pli-Namel on surface* subjected to nigh heat. Cannot be tinted with Colon in 03, l's each Vi's each Regular Color*.............................. $7.05 12.05 White..................................................................................................................... 7AS Black.......................................................................................................................... 5.00 2AS 1.75 WALL FINISHES SPEED-WALL FLAT .Tmt of Product--The finest Flat Wall Finish possible to produce. Heavily bodied, this paint flows freely and is setMeveliag. Rsmarkable hiding power alone places it far above ordinary wall finishes. Proper blending and the select grade of ingredients, account for the extra long wean&g quality and unusual hiding power and covering capacity. This paint dries to a beautiful smooth finish. Viewed toward light there is a slight sheen--desirable because it permits easy washing, but with no more sheen than is permissible in the best Flat Wall Paint. In addition to the popular White there is a wide selection of delicate and rich shades suitable for the most artistic decoration of walls and ceilings. Drying Tim*--18 hours--24 for recosting. Cottrag*-- 400-460 square feet per gallon--one coat. Application--Stir thoroughly with a lifting motion. On Platter Surface*--Bo sure surface is dry and free from dirt, grease and loose particles. All new plaster or cement walla that show indication of alkali or active lime after tearing with Phenolphthaline should be given a wash coat of Zinc Sulphate solution (two pounds of Commercial Zinc Sulphate dissolved in one gallon water). Old Painted Surface*-- Walls--ll old paint has become porous end worn with age and repeated washings, apply a coat of Speed-Will Interior Base Coat and then proceed as recommended for New Unpainted Surfaces. If old paint la in goon condition, ons coat of SpaedWall Flat is often sufficient. If two coats are considered necessary, apply a first coat of Speed-Wall Flat mixed with equal parts of SpeedWall Interior Base Coat. Allow this to dry then apply a coat ol Speed-Wall Flat as it comes from the can. On woodwork In plaee of Base Coat use Gliddencoat (Enamel Undercoater). New Unpainted Surfaces -On unpainted walls make sure that wash coat of Zinc Sulphate solution hat dried out. For first coat apply Speed-Wall Interior Base Coat. Allow to dry overnight then apply a mixture of one-half Speed-Wall Flat and one-half of Speed-Wall Interior Base Coat. After this has dried 21 hours apply a finishing coat of Speed-Wall Flat as it comes from the can. On woodwork use Gliddencoat (Enamel Undercoater) in place of Base Coat. White and Color*. S's per gal. $3.85 I'e each $3.85 V's each 91.27 SPEED-WALL SEMI-GLOSS Type of Product--A type of wall finish embodying quick drying properties without sacrificing any of tbs easy working and flowing qualities essential to a perfect job. It dries with a beautiful semi-gloss and is as satisfactory for woodwork and furniture aa for wall decora tion. It* hard, closely knit film permits easy and repeated washing, while its soft pleasing gloss imparts no strong light reflections or glare. Drying Time--18 hours--2$ or more for recoating. Carnage--500-550 square feet per gallon--one coat. Application -- Same aa Speed-Wall Flat. S's per gal. l'a each %'* each White and Colors................................................................ 35.20 $5.30 11.60 SPEED-WALL GLOSS Type of Product--Highly water-proof, resists steam, moisture, and washing. The white resists yellowing and the colon retain their original freshneta and charm over a long period. Practical for kitchen, bathroom and similar household uses. It may be applied to plaster, cement, wood, wallboard, or metal surfaces. Spreads smoothly from the brush--no pulling--no sagging--no brush marks. Drying Time--18 hours, 24 for recosting. Comag*--64XH150 square feet one coat. Application--S*me as Speed-Wall Flat. 5'a per gal. l'a each %'s each Vi's each White and Colors................................. $5.95 95.45 81.96 9M GLD025A37 SPEED.WALL INTERIOR BASE-COAT Oil First Cotr Typt of Product--A prepared off and pigmented primer and sealer (or all porous wall surfaces with exceptional penetration and filling properties. Stops suction in composition board and plaster walls and neutralizes to a degree the free alkali in the plaster. Being heavily pigmented it has sufficient opacity so that one coat of finishing material only is required. Drying Tin*--18-24 hours, 24 or more for recoating. CoMrag*--400-450 square feet per gallon--one coat. Applieation--Stir thoroughly before using. Where there is a possibility of hot lime in the plaster we recommend first washing the surface with a solution of two pounds of commercial Zinc Sulphate to a gallon of water to neutralise the lime. Allow the surface to dry thoroughly. Make sure al) moisture has evaporated. Then apply a coat of Speed wall Interior Base Coat reduced with one pint of turpentine to the gallon of Base Coat. Allow this coat to dry overnight and retouch any spot* that indicate unusual porosity by flat spots.. 5's per gaL Oil First Coater................................................................... 84.25 l'a each 54.15 *4's each $1.35 SPRED PRODUCTS--Flat, Luster. Primer-Sealer, and Satin listed on page 27. GLAZING LIQUID Ty p* *! Product--A clear liquid that dries with an eggshell finish. This material is recommended for Use over walls previously finished, preferably with a semi-gloss paint, for producing stippled, mottled or tiffany effects. Ideal as well for the antiquing and polychromlng of furniture and interior woodwork. Drying Tims--Overnight. Cortrage--600 to 700 square feet per gallon. Application--A clear liquid that dries with an eggshell finish. This material is recommended for use over Speed-Wall Flat or SemiGlees tor producing stippled, mottled or tiffany effects. This effect is obtained by first building up the surface with the necessary coats of Speed-Wall Flat or Semi-Gloss. After these coats have dried, Glazing Liquid should be applied to as much of the surface as can be worked conveniently at one time. Immediately following this application, and before Glazing Liquid baa dried, reduce one or more shades of Color in Oil to a creamy consistency by the addition of dazing Liquid, and spot the wall surface. Then, using a cloth, blend one spot into the other. Heavier applications of color at the base of the wall will rive a darker effect than at the top. After this blending is accomplished, crumple a doth, using it to stipple the entire wail surface to further blend the colon and produce the desired mottled effect. Glazing Liquid 5'e per gal. $4.50 l's each $4.60 Vi's each $1.45 SEALETTE Typ* of Product--Sealett* seals, primes end finishes in one operation. It can be applied over dry surfaces of casein, calcimine and texture paints. Also plaster wall board, wood previously painted, brick or cement surfaces or any other dean, dry and solid interior paintable surface. Drying Tin*--IS houn. Coeerape--360 square feet, approximately. Application--AH surfaces mutt be dean and free from dust, dirt and grease. Loose and scaling surfaces should be win brushed or scraped. Reduce Sealette Flat by adding two or three pints of Mineral Spirits or Turpentine to the gsljon, depending on porosity of sunaca and method of application. Do not use Linseed Oil Varnishes, or patented oils for reducing Sealette Flat for Finishing coats. 5's per gel. Sealette................................................................................. $*.60 l's sack $$.70 Vi's each SUM 10 GLD025*38 ImWes t bp BARN AND ROOF PAINTS ENDURANCE BARN PAINT Type of Product--Often the best protection for outside surfaces to be found at such low cost. A dependable paint for exterior use, with easy working qualities and good hiding power. Spreads easily and smoothly, drying slowly to a tough, glossy surface. Greatly improves the appearance of barns, fences, warehouses, factories and other structures of this type. Excellent for metal roofs and brick surfaces. Appli cation of this paint increases the value of the property and protecta the investment--all at an unusually low pries range. Unpaintea or poorly protected surfaces are an unnecessary liability when a reliable Bam Punt can be applied for sueh a small outlay. Preventa deteriora tion and high replacement or maintenance charges. Drying Time-- 24 to 36 hours. Coeerapc--400-460 square feet per gallon, one coat. Application.--Stir well before using. Apply with a large bristle brush working it into the seams and cracks. Old Pointed Surfaces should be scraped or wire brushed to remove loose particle*. Two coats are recommended, but If the surface Is in good condition one coat may be sufficient. The paint may be thinned with raw linseed oil to make It work properly over porous surface. Nevr Wood Surfaces--For first coat on new wood, add one-half gallon linseed oil to one gallon of paint. Second coat may be applied full body as it comes from the can. N*u> Metal Surfaces--Roofs, eaves and down spouts should be carefully scraped to remove aS rust and scales after which two coats of barn paint should be applied. For Brick or Concrete -The first coat of bam paint should be reduced with cement mixing liquid and any ipots that show unusual absorption should be given a second application. Allow surface to dry at least 3 days before the second coat is applied full body. S'* per gaL Red.................................................................................. .. $3.05 Gray...................................................................................... 3.95 I's each $3.15 4.05 Vi's each $1.0$ 1.30 TINNERS* PAINTS Type of Product--For use primarily on metal roofs, flashings, gutters, downspouts and for work inside in shop* but equally satis factory for surfaces of wood and brick, etc. Permanent in color and waterproof, they dry to be bandied in a few hours and hara overnight They are sufficiently elastic not to chip or crack even on bending the metal on which applied. Furnished only in a low gloat to that they will not intensify irregularities in the metal. Drying Time--Overnight. 36 hours for recoating. Coverage-- 450-500 square feet per gallon--one coat. Application--Stir paint well before using. Apply with a metal bound brush. Before application on any surface be aura that all ruat scale, grease, dirt, etc. are removed and that the surface ia clean One coat is ail that la required. Material is ready for use but for greater workability material may be reduced slightly with pure boiled linseed oil. 5's per gal. Tinners' Red........................................................................ $3.50 Green.................................................................................... 6.15 I's each $3.60 6.25 Vi's each $1.18 ___ METAL PROTECTIVE PAINTS n e v -a -r u s t Type of Product--An exceptional product for efficient protection of metal surfaces against weather and temperature changes, it is water-resistant and also resists acid and alkali fumes. It contains nut inhibitive pigments and requires no primer, although it la very often used in conjunction with Liquid Bed Lead Modified. Drying Time--18-24 hours, 48 or more for recosting. Coverage--650-600 square feet per gallon--one coat. Application--Stir well before using. Surfaces to be finished should be scraped or wire brushed free from ell rust, scale and loos* paint. Also be sure to remove all dust, dirt, grease and oil by washing if necessary. Be sure surface is dry before painting. Two coats are recom mended, allowing twenty-four hours drying time between coats. If thinning is deemed necessary add a small amount of boiled linseed ofl. 5'a per gel. Gray, Greenbrier................................................................................................. 18.20 Brown, Red, Black _________________________ __________ ______________ g.00 l'e eaek $1.30 $,io U GLD025439 ZINC DUST PAINT Typo gf product-TUt i* made to meet the demand that edits today is industry and avery farming community. For application to all sheet metal, particularly the galvanized and zinc coated aheets to which it has adhesion better than can be obtained through the use of other primers recommended for the same purpose. It serves as both the primer and finishing material. Conforms to specifications of the National Zinc Institute. Drying Tinu--Approximately 24 hours. 48 or more for recoating. Courage--First coat coverage is approximately 480 square feet and the second coat from (00-826 square feet to the gallon. Application--The surface to be sainted must be clean, dry and free from all foreign deposits. If practical, it is recommended that galvanized metal surface* be permitted to weather for sixty days at least to dissipate the grosses that are results of the galvanlxfng processes. , This product serves as both a prime and finishing cost and should be applied, in both cases, in the body that is found In the package. At least 48 hours should be allowed between coats for thorough drying. Zinc Dast Paint, (Price* oa request) CHROMATIZED METAL PRIMER Typ* of Product--A scientific combination of rust inhibit!ve pigment* in a water-resisting vehicle. Better than Red Lead tor either interior or exterior surfaces but not effective on galvanized metal surfaces. For both new work and touching, up of ben spots when re painting. Drying Tims--18 bourn. 88 or more for recoating. Cooorago--660-600 square feet per gallon--one coat. Application--The surface to be primed must be dry, free from dirt, dust and grease and foreign matter. Apply full body for brushing and reduce with turoentine or mineral spirits for spraying. Allow to dry hard before re-coating, which, under normal drying conditions or temperatures of 70*, will require approximately 18 hours. >'a per gaL l'i each Red (7.16 87.26 GUDTITE GALVANIZED IRON PRIMER Typo of Product-- A superior first coat for all galvanised metal, plymetal, galvaneal, or treated metal surfaces that possesses better adhesion for these surfaces than any other primer. Metal require* no previous etching with acid. Eliminates the peeling experienced irith ordinary materials. Dries hard for re-coating overnight Adhesion is better as application fa in thin rather than heavy coats. Drying Time--Overnight--24 hours or mors for recoating. Cooorago - 660-600 square feet per gallon. Application--It fa recommended the surface be first waahed with an all purpose thinneror turpentineand than rinsed thoroughly with dean water. Allow the surface to weather as long as is practical. Apply one coat of Glidtits Galvanised Iron Primer full body as received. Apply paint selected for finishing not more than 72 hours after the uHdtite Galvanized Iron Primer has been applied. 6'a per gaL White..................................................................................................................... $4.76 i'a each $446 It GLD025440 !ssu* LIQUID RED LEAD --Modified Type of Product--A mil made, protective, rat inhibitive paint (or uee u a first coster on structural steel, iron end all metal surface*. Drying Tint*--18-24 hours, 48 or more (or recosting. Coterag*--460-600 square feet per gallon--one coat. Application--See that the surface to be coated is hand brushed or sand blasted free from all nut scale and other foreign matter and perfectly dry. First apply a coat of GUdden Liquid Red Lead (modified) reduced 10% with naphtha or turpentine. Alter the first coat is thoroughly dry, and u succeeding coats are needed, apply as it comes from the container. 5'a pet l's each Liquid Red Lead-(Modified).................... -................................................... $7.15 $7.25 SMOKE STACK BLACK Type of Product--A. high gloss black for smoke stacks and all other surfaces that reauire a heat-resisting finish. Not only will it with stand high degrees of heat but it is unusually weather-resistant as weO. This material Is made on a varnish and carbon black base and should not be confused with ths many asphalt products offered. Should withstand heat to 800* F. Drying Time--Overnight--86-48 hours for recosting. Coterag*--400-600 square feet per gallon--one coat. .Appliedion--Stir paint thoroughly with lifting motion. Surface must be dry and free from dirt, grease, rust and other foreign matters. Apply one or two coats Smoke Stack Black as received In the container, allowing sufficient time to dry between ooats. Smoke Stack Black________ 88.80 5's per gal. l's each $3.90 ENAMELS AND UNDERCOATERS RIPOLIN --ARCHITECTURAL BLT. Type of Product-- Ever since it was perfected. Ripolin has been the standard which makers of enamel have tried in vain to equal. It has never been duplicated and its pre-eminence is recognized by the most discriminating users of enamel throughout the world. Ripo lin, the Original Holland Enamel, is without a peer for beauty and durability. Drying Tims--Gloss--24 hours--72 or more for recosting. Semi-Gloss--24 hours--72 or more for recosting. Cottragt-- Giosa--700-750 square feet per gallon. Semi-Gloes-- 600-660 square feet per gallon. l's each Vi's each Vi's each Gloss, Semi-Gloss, White______ ________ ___________ $10.20 $2.85 $1.53 RIPOLIN -- QUICK DRYING Type of Product - A superior enamel made to meet the demands for a quicker drying material. Retains most of ths outstanding qualities of BLT Ripolin but dries in from 6 to 8 hours. Levels out freely without brush marks to a brilliant, hard, tile-like lasting gloss surface. Drying Time--SS hours--24 for recoating. Cottragt-- 650-600 square feet per gallon--one coat. Application--Stir well before using. Old Pointed Surface*-- Ripolin Undercoat is required only on enamel job* calling for a distinct color change from dark to lightershade*. Apply one or two coats as may be required to produce neceesary opaqueness. Allow twelve hours drying time. Sand last coat lightly before applying enamel. Noe VnpainUd Surface*--Apply two coats of Ripolin Undercoat to new wood that Is properly sanded and perfectly dry. Ths first coat should be reduced about 10% with turpentine, allowed to dry overnight, then followed with a second coat applied full body. Second coat should dry about 12 hours, then apply enamel In color selected. Sand lightly between coats. l's each Gloss and Semi-Gloss White........... $9.05 Vi's each 92M Vi's each $1.39 Vis's each $ .79 13 GLD025441 ** RIPOLIN UNDERCOAT---QUICK DRYING Type of Product--This product dries sufficiently hard to be recoated in 18 hours. It has more sealing properties than any other Enamel Undercost, stays where it is put. flows free from all brush marks and requires minimum sanding. Because of its unusual opacity no mors than two coats are necessary for even the best enamel job. Drying Tims--18 hours-24 for recoating. Coserags-- 660-600 square feet Application--Apply with brush. 1's each Ripolin Undercoat..................... ........... _......................... 85.90 Vi's each 81.75 Vi's etch 81.00 SUPERIOR SPEDENE ENAMEL GLOSS Type of Product--A high gloss enamel that retains its origin- whiteness and gloss throughout its entire life. Intended primarily for woodwork. It cannot be surpassed as an enamel for wall work in the home, public building and hotel where a durable and washable finish is desired. This product is quick drying and is not blued so that in the hands of the painter true ivories and creams can be developed through the use of colors in oil for tinting. This material will not sag and its exceptional flowing qualities eliminate all possibilities of brush marks. Drying Time--6-8 hours. 24 for recoating. Cottrage -- 650-600 square feet per gallon --one coat. Application--Stir well before using. Old Painted Surfaces--The surface should be dry, clean and free from grease, dirt and other foreign matter. Apply one or two coats as needed. On dark woodwork apply one or two coats of Gliddencoat (enamel undercost) following with one or two coats of enamel. 8and lightly between coats and allow at feast overnight drying time between costs. New Unpainted Surfaces--Ail new work should be built up with Gliddencoat (enamel undercoat) as directed. The finishing coat should be Superior Spedene Enamel applied full body. On walls use Interior Base Coat as primer in place of Gliddencoat. 1'a each Superior Spedene.................................. -............. ........... ................................ 87.45 Vi's each 82.15 GLIDDENCOAT Typs of Product--Because of its auick drying properties, it is a truly economical Undercoat for the Master Painter to use, and tha householder as well. It dries to recoat In 24 hours, possesses unususl opacity, works easily under the brash, Bows out tree Irom all brash marks and requires but a very light sanding. Because of its unususl sealing properties there la no absorption of succeeding costs of enamel and they stand out with a maximum of luster and depth of gloes. It can be water sanded to a beautiful eggshell. . Drying Time--12-18 hours--24 tor recoating. Comagt--600-600 square feet per gallon. Application--Stir well before using. Otd Painted Surfaces--Gliddencoat is required only on enamel jobs calling for a distinct color change from dark to lighter shades. Apply one or two coats as may be required to produce necessary opaqueness. Allow twelve hours drying time. Sand last coat ughtly before applying enamel. Ntw Unpainted Surfaces-Apply two coats to new wood that is properly sanded and perfectly dry. The first cost should be reduced about 10% with turpentine, allowed to dry overnight, followed with a second coat applied full body.Second coat should dry about 12 hours, then apply enamel in color selected. Sand lightly between coats. l's each Gliddencoat........................................... 85.25 Vs* each fU H'i each $ .81 lAt's each 8M 14 GLD025442 VARNISHES GLIDDENSPAR Type of Product--This product U one of the latest developments in the manufacture of varnish, a product that has more resistance to extreme exposure, water and acid conditions than any other varnish made. It possesses more filling properties than other products and is recommended for ail extenor surfaces, and on those places inside the home subject to water and exposure, such as window sills. Drying Tint--Overnight--48 hours for recoating. Coveragt -- 600*700 square feet per gallon-- one coat. Application-Be sure surface Is clean and dry. All open grained wood, such as oak, ash, etc., not previously finished should be filled with Paste Wood Filler, wiping the excess filler off the surface across the grain. Allow to dry twenty-four bourn then apply first coat of Gliddenspar reduced ten per cent with turpentine. After sanding tightly apply a second coat as It corns* from the eta. Close grained woods require no fillers; after staining when necessary, sand lightly, apply one, two or three coats of Gliddenspar. Shellac should never be used in a finishing schedule calling for Gliddenspar. Old Work-- Remove old finish with sandpaper and apply two coats of Gliddenspar. Thin the first coat with turpentine, allow to dry twenty-four hours and apply a second coat as it comes from the can. I'a each Gliddenspar........................................... $7.50 VV* each $2.15 V4' each (1.20 Vis'* eseh $ ,72 BAR AMD TABLE TOP VARNISH Type of Product-k straight synthetic base product extremely satisfactory for all surface* about the house, club or hotel It is uot affected by boiling water, alcohol, or hot dishes* Applied on chairs, it will not become tacky from body beat. It Is suitable for a floor varnish, and its pale eo|or makes it ideal for linoleum. It also rubs and polishes as well as the best furniture vornishee. Drying Time -- 8 hours -- 16 for recoating. Coverage-- 500-600 aquare feet per gallon. Application-- Do not use shellac any place in the finishing schedule. Old Work--Be sure surfaces are dean and free from foreign substances and perfectly dry. One or two costs are all that are required. On a two-coat job, reduce the first coat approximately ten per cent with turpentine and apply second coat full body as It comes from the **- New Wort--After staining and filling open grain woods with Paste Wood Filler or staining dose grain woods, apply a first coat of varnish reduced ten per cent with turpentine. The second coat should be reduced with turpentine and toe third or final coat applied full body. Allow twenty-four hours drying time between coats. l'a each Bar and Table Top Varnish............... $7.50 V4'* each $2.15' W each $1.20 Via'a each $ .72 JAPSPAR Type of Product--An extremely durable varnish for exterior use. Absolutely waterproof. It has extreme dastidty, excellent body and flowing properties. Sets dust free in from 2-3 hours and dries in from 8-10 hours, according to conditions. Can be rubbed to a dull finish m about 3 or 4 days. For use on ships, yachts, outside doors, window sills, casings, vestibules and all work whether wood or metal that is exposed to the elements. Drying Time--8 hours--24 for recoating. Coverage--600-700 square feet per gallon--one coat. Application - Be sure surface is dean and dry. Open grained wood, such as oak, ash, etc., not previously finished should be filled with Paste wood Filler, wiping the excess off the surface across the grain. Allow filler to dry twenty-four hours, then apply a first coat of Japspar reduced ten per cent with turpentine. After drying, sand lightly and apply a second coat lull body. Close grained woods require no fillers. After staining when necessary and sanding, apply one or two coats of Japepar. Shellac should not be used as a first coster. Old Wort--The old finish should be sanded to a smooth surface. Be sure the surface has been cleaned of the resultingdust and Is dry. Apply one or two costa of Japspar. Reduce first coat with turpentine, allow overnight drying, and then apply a second coat full body. l'a each Japspar................................................. $6.30 V4'* each $1.85 Vi'* each $1.05 %' each $ .05 FLOORETTE Type of Product-Tor finishing natural, painted or grained floor*. It combines hard and quick-drying properties without **rfo*hg the elasticity so essential to a floor varnish. It ia waterproof and withstands the hardest usage to which floors are subjected. Does not mar or scratch white. Seta dust free in 2 or 3 hours and hard in from 8 to 12 hours, according to condition*. Can be rubbed and polished or left in the gloea. Drying Time--8 hours--24 for recoating. Coverage-- 600-700 square feet per gallon--one coat. IS GLD025443 AwAicaUon-Old Work-Bo (tin surface is clean and free from dirt, trtw, u and other foreign mattar, and perfectly dry. Apply one or tvo coats as needed. On a two-coat job reduce the drat coat ten per cent with turpentine and apply second coat full body. Allow twelve hours to dry between coats. Ntw Work-The surface should be dry, clean and sanded smooth. Open pain wood should be filled with Piste Wood Pillar. Aftw staining and filling and allowing the filler to dry, apply one costof iloowtt* reduced to ten per cent with turpentine. Apply second coat full body as it comes from the can. II third coat u needed apply full body. CAUTION--Floorette when used on floors should not be applied over shellac, shellac substitutes or liquid wood fillers. l's etch Floorette............................................ *6.30 %`e etch $1.88 %'s each *1.05 Vis'* each $ .*5 LIK-A-RUB Tvp* <4 Product--Intended for interior trim and dries with a nibbed or velvet finish. We recommend a finishing coat of this varakh, with preceding costa of Wearette. Drying Tim*-8 hours-2* for recosting. Cottrag*--600-700 square feet per gallon--one coat. Application--Keep thoroughly stirred while using. Old Work--U the surface is at all worn apply one coat of Wearette Varnish end follow with a cost (A Lik-A-Rub. If the old finish is in good condition one coat of Lik-A-Rub should be sufficient. Sets dust free in two hours. Nets Work--We recommend Lik-A-Rub to be used is a finishing coat only. The surface should be built up with Wearette Varnish thinned with a small amount of turpentine. For the final coat apply Lik-A-Rub full body as it comes from tbs can. l's each Uk-A-Hub............................................. *6.30 %*e each *1.85 Vi's each *1.05 Vis's each * .<5 R APIDCOTE Top* of Product-- This product possesses quick drying qualities without sacrificing the elasticity, durability or wear-rssdsting qualities of the vsmish. Can be used on floors, woodwork or furniture or on interiors, and, bring unusually waterproof, it excellent for exterior use ss well. The extreme paleness of this varnish makes it ideal for use on surfaces which are to retain the original color. Drying Tim*--4-6 hours. 16 for recoating. Comag*--600-700 square feet per gallon--one coat. Application--Old Work--Remove all dirt and grease and sandpaper sufficiently to remove the glow of the rid varnish. If the surface Is badly marred or checked, take off the old varnish with vsmish remover or sandpaper. Where two or more coats are used, reduce the first cost of varnish 10% with turpentine. Allow to dry overnight for complete drying of each coat. Ntv Work--Open grained woods should first be filled with Paste Wood Filler following directions on the label and when dry apply Rapidcote Varnish. If two or more costs are used reduce the first cost about 10% with turpentine. Do not use over shellac, liquid wood fillers, wax or lacquer on floors. l's each Rapidcote.............................................. *6.30 %' each *1.85 %'a each *1.05 Vis'* each * .65 SPEEDOIEUM Type of Product--For use on linoleum or oil doth. It is pale in color, elastic, quick drying and very durable. It successfully with, stands the hard usage to which linoleum or varnish is subjected. One coat of this varnish over an old worn surface of linoleum will restore the brightness of the original finish and prolong the life of the linoleum. Dries to walk on overnight. Drying Tint*--Overnight-24 hour* for recosting. Coesrajc-- 600-700 square feet per gallon. ______________ ___ Application--One cost applied at six-month intervals over surfaces previously finished and after they nava been washed and dried, will preserve the color and impart a life to the linoleum heretofore unrealized. If wax or oil polishes have been used wash thoroughly with turpentine or mineral spirits. Due to the dressings that are applied to all new linoleums to keep them soft and pliable whila in stock, it te advisable to let the lin oleum lay for two or three weeks, washing it at intervals to remove the oil dressings, which If present, will retard the drying. New linoleum, after having been freed from these oil substances, all other foreign matter, and allowed to dry perfectly, should receive two coats of Speedoleum, giving the first coat from six to right hours to dry perfectly before applying the second coat. Do not apply Speedoleum over Shellac, Liquid Wood Filler or Shellac Substitute*. Speedoleum. l's each 65.80 %' each 81.75 %'s each 6 .99 Vis'a each $ .61 . 1* GLD025M* -IHIiTOTIlD ROCKSPAR Type of Product--A heavy bodied varniih just as the painter likes It. One coat is equivalent to two of an ordinary varnish, for there is no shrinkage on drying. Dries with a deep high gioas. Takes a high reduction. Por fioort and oil interior turfacee. Drying Time--Overnight, 24 hours for recoating. Courage--600-700 square feet per gallon. Application--Old Work--Surface should be dean and dry and sanded to a smooth surface. One coat Is usually sufficient. Where two coata are needed reduce first coat 10% with turpentine. New Work--Open grained woods should be stained and when dry given a wash eoat of shellac. Then HU surface with Paste Wood Filler as directed on package. When dry sand smooth. Follow with two coats of Rockspar reducing first eoat 10% with turpentine. Cloae grained woods should receive a coat of Endurance Wood 8taln followed with a wash eoat of shellac, sand lightly, and follow with one or two coats of Rockspar. Do not use shellac on noon. l'e each Rockspar............................................... tt.00 %'eeaeh 1.7* Vi's each $1.09 Vis's each $M SUPERIOR BRONZING LIQUID Type of Product--An excellent liquid for aluminum and bronxe powders of Just the proper body to enable the powder to float and leaf perfectly. Each particle lies flat upon it and not at angles which may affect the brilliancy ofthe finish. Heat resistant, It can be used sati*. factorily on exterior as well ss interior surfsces. Drying Tint--4 to 6 hours. Coocragt--600 to 700 squire feet per gallon. Application-- Mix Bronze with sufficient liquid to make the mixture of the consistency of cream. Do not mix more than required for immediate use. Apply with a Boft bristle varnish brush. Avoid brushing back and forth, cover surface, if possible, with ont stroke of the brush. 5's per gal- 1's each %'s each %'s each V%'s each Superior Bronzing Liquid -- $3.39 $3.40 $1.1$ $ .68 $ .44 PAINTERS* FLOOR AND TRIM VARNISH Tvp* of Product--A dependable varnish for floors and all interior trim. Ideal for hotel, apartment houses and painter use where a durable, high gloss finish is desired. Dries dust free in from 2-3 hours and hard enough to walk on overnight. Drying Time--Overnight, 24 hours for recoating. Coteragt-- 600-700 square feet per gallon. Application--On Old Work- Remove all dirt and grease. Sandpaper sufficiently to remove gioes of the old varniih. If surface is badly marred and checked take off old varnish by scraping or with varnish remover. On New Work--Open grained wood should first be filled with Paste Wood filler. Where two or more coata are to be used, the first coat may be thinned with one pint turpentine to a gallon of varnish. For best results: Do not use over Shellac, Shellac Substitute, Liquid Wood Filler, Wax or Lacquer. !' each Painters' Floor Varnish.........,,......... . $4.40 %'s each $ f.43 %'s each $.8$ %*'# each $ .53 JAPAN DRIER Type of Product--This is a drier of quality and is intended especially for house painters' use in drying oil and linseed oil paints. It Is made from hard gums and is thoroughly reliable and satisfactory in every way. Two and one-half gallona of crier are enough for fifty gallons of oil. 5's per gal 1'* each %'s each %'s each %' each Japan Drier........................... $2.55 $2.65 $ .95 $ .59 $ .40 BLACK ASPHALTUM Type of Product-Made from a good quality of gum, using naphtha and turpentine as a reducer. Dries with a smooth. Jet black surface. Recommended for use where a medium priced asphaltum is required. Drying Tint--2 to 8 hours. Coteragt--400 to 500 square feet per gallon. Application--Apply with brush. 6's per gal. 1'a each %'s each %'s each %*'a each Black Asphaltum................. $1.70 $1.80 $ .7$ $ .48 $ .37 17 GL0025445 GLID-SEAL Typ* of Product--A reinforcing liquid made from the earne oil* and gumi that are the bate* of the finest waterproof varnishes manu factured. Its uses are unlimited. As it is furnished it serves excellently at a finishing varnish on all interior and exterior surfaces including linoleum. It is an excellent primer and sealer for plaster, concrete and brick and when added to wail paints produces a pigmented primer reducing the number of finishing coats necessary. It can be used as the vehicle in aluminum paints. When added to bouse paints, floor paints, or wall paints it imparts added durability, working properties, washability and enhances the gloss as wall as the initial set of the paint. Drying Tim*-4 to 6 hours-hard overnight. Comag*--600 square feet per gallon. Application--Aluminum and Bronx* Paint*--Use 1to 2 pounds of powder or aluminum paste to fi gallon of GUd-Saal and ii gallon of turpentine. Waft Ffnfshss-Two parts of Glid-Seal and one part of Flat Wall Finish will produee an effective well-sealing primer. An intermediate coat should be mixed in the proportion of H to H of Flat. The finishing coat reinforced with one pint of Glid-Seal to the gallon will improve the flow and washing qualities and product a soft restful sheen. Primer--Apply full body except on extremely porous surfaces of brick and cement when Glid-Seal should be reduced 25% with turpentine. The addition of Euston White Lead in OQ to primer for plaster is recommended. Floor Paint*-Glid-Seal is a thinner for Euston White Lead plus Color* in Oil will product hard drying, wear misting and waterproof floor paints for interior and exterior floors, decks and roofs. l'a each >/'* each Glid-Seal.............................................................................................................. $5.50 ll.CS PENETREX Tvp* of Product--X penetrating type of finish for floors. It affords unusual protection against staining and discoloration aa wall as imparting wearing qualities. This product penetrates deeply and seals the pores of the wood. It is beat applied by brushing on to the surface for more than 16 minutes. A wood surface should be carefully sanded and made smooth before applying the ramUh and a light moating with steel wool is advisable between coats. Recommended for schools and public bufldingt whert it will seal the surface and male* it May to clean. Also protecting it from scuffing, scratching, and stains. Drying Tim*-- Overnight. 24 hours for recosting. Corcrag*-- 500-600 square feet per gallon. Application--Shake well before applying and stir occasionally during use. Floor surfaces should be free from all foreign matter and sanded carefully to a smooth surface, after which all dust should, be carefully removed. Apply Penetrex as it comet from the can by either mopping or brushing it on to the surface. The best drying conditions are in temperatures o! 70* fVAfter 20 minute* any excess material that has not been absorbed by the wood should be wiped from the surface with clean rags and in another hour the entire floor surface should be buffed with a pad of No. 2 steel wool to remove any grain of the wood that if raised, any excess material, and to product n uniform appearance. Where two eoats are to be applied allow 12 hour* for complete hardening of the lint coat. Anyexcess material remaining on the surface 10 minutes after the second cost is applied should be removed and the entire surface buffed with steel wool at recommended in the first coat application. Open grain woods require no filler as the second coat will sufficiently fill the open grain. Old floor* previously finished must be cleaned free from ail paint, varnish or other finishing materials previously used with either sanding equipment or paint and varnish remover. Where paint ana varnish remover is used wash the surface thoroughly with naphtha to remove wax deposits. Caution-All wiping rags and steel wool should be burned immediately after use. 6's per gal. Penetrex______________________ _______ _____________ 15.00 l's each *5.10 V4' each *155 1 i i No. 65 VELVET FLOOR VARNISH Typ* of Product-X semi-gloss Floor Tarnish lor producing a velvety finish on floor* where a reduced luster is desired. It reduces the glare shown by the glossy type of Floor Varnish. It ha* good wear resistance and is resistant to water and repeated cleaning and scrubbing. Drying Tint*--Sets dust free in 2 hours and dries bard overnight. Ccotrag*-- 600-700 square feet per gallon--one coat. Dinetion*--Stir well before and while using. Nno Work--No. 65 Velvet Floor Varnish is recommended as a finishing coat only. Tbe surface should be built up with Flooratta Varnish thinned with a small amount of turpentine. For the final cost apply No. 65 Velvet floor Varnish aa it comas In tb* cam Old Work--If the surface Is at all worn apply one coat of Floorette Varnish and follow with a coat of No. (5 Vahret Floor Varnish. If the old surface is in good condition one coat of No. 65 Velvet Floor Varnish should be ample. i'seach *6.05 V*t each *1.79 Vi'a each *1.02 W* eeeh $ -62 GLIDDEN PURE SHELLAC Typs of Product--A quality product consisting of pure gum shellac cut with denatured alcohol. Supplied in White or Orange. Application - Shake well before uaing. When too thick thin with denatured alcohol. Keep tightly corked when not In use. When used aa a surfacer or sealer on new wood Shellac should be thinned with alcohol to the extent of from IS to 25%, depending on the porous condition of the surface. When used for sealing knots Shellac should be generously applied in full body without thinning over knots, and all sappy parts of the wood surfsce, to thoroughly seal and prevent sap, gum or pitch from seeping through succeeding coats of other finishing materials. Caution--Keep away from open flames or overheated surfaces. GLIDDEN PURE SHELLAC--Prices upon application. STAINS - FILLERS - REMOVERS AD-EL-ITE NON-INFLAMMABLE PAINT C VARNISH REMOVER Type of Product--Advantages over ordinary removers for removing baked enamel, paint, varnish, shellac, etc.: (1) It is non-lnflam mable. (2) It has a heavy body and therefore has less tendency to run anasag on upright surfaces. (3) Water may be used to clean remover from metal surfaces, mineral spirits or turpentine for other type surfaces. (4) Stays wet longer which permits working on larger areas. Application--Apply remover with paint brush. Usually from 6 to 20 minutes is sufficient to soften'the finish, depending upon the hardness and nature of the old finish. Remove softened finish with a broad knife and follow above for final cleaning. Before refinishing be sure surface is thoroughly dean and dry. Note--Paint and Varnish Removers irritate the skin of some people. Protect the skin by applying Vaseline. CAUTION: Contains Volatile Chlorinated Solvent. Use with adequate ventilation. Avoid prolonged or repeated breathing of vapor. Avoid prolonged or repeated contact with skin. Do not take internally. I's each $4.20 Vi's **eh $1.3$ Vi's each $ .7$ AD-EL-ITE PAINT ft VARNISH REMOVER Type of Product--The highest grade, most satisfactory remover manufactured. Contains no alkalies, adds, oils or water. Does not raise the grain or discolor wood. Very slow in evaporating, consequently very effective on old paint, varnish, enamel, lacquer or baked japan. Ad-EI-Ite Paint A 5's per gal. Varnish Remover............. $1.92 l'a etch $2.02 Vi's each $ .78 Vi's each $ .51 Vis'* each $ .35 PASTE WOOD FILLER Typ* of Product--For use on ell open grained woods such as oak, chestnut, walnut and mahogany. It has a pure eitex base and will not shrink or break away from the pores of the wood when dry. Furnished in paste form, it must be reduced with naphtha or turpentine. Drying Time--Overnight. AppKccHon--Reduce with turpentine or benzine to a creamy brushing consistency. After it has dried 15 or 20 minutes a flattening will be noticed at which time the excess filler remaining on the surface should be wiped off with burlap or wadded excemor. The wiping should be across the grain of the wood, rather then with the grain in order to fores the filler Into the open pores. l*s each Paste Wood Filler-Natural............................................... $4.30 Vi'* *ch $L*5 Vis's each > $ .51 19 GLD025447 -1h8ignff- OLID-TONE STAINS Type of Product-- Glid-Tone it * new improved type of pigmented wipingstain for all Interior wooden surfaces. Itbrings out thebeauty of the grain of the wood as well as giving it a beautiful color tone. Gild-Tone also seals the wood and partially fills the grain, thus holding out the succeeding coats in a better manner than any other type of wood stain. Glid-Tone gives a beautiful color to both hard and soft woods and by adjusting the quantity of Gild-Tone Reducer added, the colon of soft woods can be matched to those of hard woods. Application--Bo sure surface is sanded smooth and free from sanding dust. Stir contents of can thoroughly and reduce eausl parts with GUd-Tone Reducer. Brush a good wet coat on the surfaces and allow to dry 6 to 6 minutes on the average before wiping oft excess stain with a lint-free doth across the grain of the wood to partially fill the pores, until a uniform color prevails. Allow to dry overnight before applying finish coats such as GUd-Tone Sealer, Glid-Tone Sheen or Glow, or Shellac, Varnish or Lacquer. If it is desired to use a wood filler on such open grained woods as Oak, Walnut, and Mahogany that have been coated with Glid-Tone and allowed to dry overnight, apply a coat of Glid-Tone Sealer and allow to dry at least an hour before applying filler. Caution--Keep Glid-Tone and Glid-Tone Reducer away from heat and open flame. Destroy promptly all rags used in wiping off stain after use to avoid danger of fire. l'a each %'s ssch Stain*--All Colors......................................................... *4.25 *1.35 Reducer....................................................... ............... 1.90 AS %'s each $ AO AS %('a each 9 AO .25 JAPALAC PRODUCTS JAPALAC QUICK DRYING ENAMEL (GLOSS) Type of Product-- Recommended for use where s high gloss finish is desired. Gives excellent wearing results on furniture, woodwork, furnace, pipes, grills and general household surfaces. Drying Tfms-4-6 hours-24 for recosting. Coeeragt-- 400-500 square feet per gallon--one coat. Application-Old Painted Surface*-- Remove all loose paint, rust and other irregularities. Clean surface with soap and water. Wipe dry and allow sufficient time for moisture to thoroughly evaporate. One cost of Japalae wQl be found sufficient whsrs conditions are normal, though two costs produce s beautiful aloes and depth of finish. New Unpointed Surfaces--Ai\ surfaces should be dry and dean and should be sandpapered to a smooth surface. Apply two or more coats of Japalae Enamel reducing the first coat about 10% with turpentine. Sand lightly between coats. Japalae Quick Drying l's each Enamel............................... 9TA0 %'s each 92.10 %' each 91.17 1/%'seaeh 9 .70 14i'l each 9 AS JAPALAC VARNISH STAIN Type of Product--Stains and varnishes in one operation. For use on all interior surfacss, furniture, woodwork, and floors particularly. It is unusually waterproof, will not mar or scratch while on floor surfaces. Old pieces of furniture can be quickly transformed to the popular and modern Mahogany and Walnut. Varnish Stains dry in 4-6 hours with a nch deep gloss. Drying Time--4-6 hours. 24 hours for recosting. Coverage-- 600 square feet per gallon--one coat. Application--Shake the can well before removing cover, stir the contents thoroughly before applying. Old Painted Surface*-Carefully remove all blemishes and discolorations with sandpaper or ateel wool, dean the aufaee with mild, soap and water, then allow sufficient time for thorough drying. One cost will produce a satisfactory finish under any but unusual conditions If two coats are considered desirable allow overnight for first coat to dry and sandpaper it lightly, then apply second cost. New Unpointed Surface*-Two costs are recommended, sanding lightly between coats. The first coat serves u a primer and sealer. If s third coat is considered advisable, apply full body after the preceding cost has dried overnight. Japalae Varnlak Stain--Natural and All Colors______ Ground Color.............................. l'a each 95.SS 5.25 %'s each 91.65 1.60 %'s each 9 .95 .91 %'s each 0 A0 A* JAPALAC GRAINING COMPOUND Type of Product--A water soluble material applied on ton of Ground Color and grained with a graining tool to reeembla natural wood. Any unsatisfactory design can easily be washed off or removed by applying another coat of the color. When dry one or two coats of varnish stain, in any color selected, will give the true wood effect. Drying Time--l to 2 hours. Application--Apply on* or two costs of Japalae Ground Color to cover all stains usd marks. Stir Graining Compound thoroughly and keep pigment wefi mixed while graining. Apply lightly with dean brush, graining while wet with the graining tool. After the Graining Compound has thoroughly dried, apply two coats of Japalae Varnish Stain, natural or colors, allowing sufficient time between coats lor drying. %'s each light and Dark Graining Color......................................................... 9 A8 10 GLD025448 j a p a l a c b r o n z e s -r e a d y mix e d Type of Product--Impart lasting, non-tarnishing finishes that will not rub off. Excellent for use on picture frames, andirons, brio-ebrae, in fact any surface of wood, metal or fiber where a finish of gold or silver is desired. Drying Tims-- Overnight. Application-Stir well before and while using. Apply with soft hair brush. Vi's each Aluminum............................. *1.92 Vi'* each *1.03 *4*'* each * ,U Via* each * .42 Via'a each *42 JAPALAC QUICK-DRYING DEAD BLACK ENAMEL Type of Product--A solid covering enamel, quick-drying that produces a dead fiat finish. Can be mixed with Brilliant Black to produce the eemi-gloes blacks that are so popular on electric appliances, stoves and many other items. Drying Time--8 hours. Coverage--600 square feet per gallon. Application--Old Painted Surfact*- Clean the surface with mOd soap and water. Allow sufficient time for molsure to thoroughly evaporate. Remove loose paint and sand rough spots to a smooth surface frith fine sandpaper. One coat of Dead Blade will produce a pleasing result though a second coat can be applied if desirable after the first coat has dried overnight. Nete Unpointed Surface*--The new surface should be properly prepared with one or more eoata to properly seal and prime it. finiah with one coat of Dead Black after preceding coats have dried completely. l's each Japalac Dead Black............. *7.30 Vi's each *2.10 Vi's seeh *1.17 Vis'* saeh * .70 Via'* e*ch * .45 JAPALAC SCREEN ENAMEL Type of Prodtut-- Made for the preservation of the wooden frames as well as the screen mesh of doors, window screens, etc. Drying Time--8-8 hours. Coterage--600-600 square feet per gallon. Application--The surface should be dry and free from dust and scale. One coat will usually prove satisfactory for repaint Job* while two coats should be applied to unpainted surfaces. Allow overnight for drying between coats. No thinning is necessary. Use a Jiffy Screen Applicator for best results. l'a each Japalac Screen Enamel Black...... $3.10 Vi's each $1.05 Vi's esch * .*4 Vis's each * .44 JAPALAC STOVE AND IRON ENAMEL Type of Product-- A blade enamel for all metal surfaces subjected to heat. Drying Time--6-8 hours. Coterage--600-600 square feet per gallon. Application--A}} surfaces to be finished should be dry and free from grease, dust and other foreign matter. Turpentine is excellent for removing the greasy deposits resulting from cooking BUT SHOULD NOT BE USED NEAR FLAME. Under ordinary conditions one coat of enamel will prove ample but where two eoats are considered advisable allow overnight for drying of first coat. Vi's each Japalac Store and Iron Enamel......... ,*1.10 Vi's each * .*7 Vis'* each * .45 Via'e eedh * .12 fit GLD025449 Tmffamp AUTO FINISHES SPEEDEN AMEL Type of Product--A quick drying, durable synthetic enamel designed primarily for automobiles but made in a wide range of colon which adapt it for use as well on wood and metal outdoor furniture and bicycles. Drying Time-S-S hour*. Coverage-- 600-600 square feet per gallon. Application - First see that the surface to be refinished is entirely free from grease, oil, dirt, wax or polish and that it is dry. If the old finish is badly marred or checked, rub to a smooth surface with fine sandpaper or steel wool. Clean all over with a rag wet with gasoline and allow to dry for about one-half hour. Dust off thoroughly before applying the first coat. Speedenamel is ready to apply as it comes from the can. Use a good quality brush, flowing on the enamel and cross brushing It on one panel at a time, such as a door, hood or side of the body. This will eliminate the danger of sags or brush marks. Black, Autumn Brown________ _____ Sage Green, Fayette Green, Dover Gray, Desert Sand, Royal Blue, Windsor Blue__________________ Fire Red, Monroe Maroon, Jersey Cream.._________ _________ ____ Gray Primer....................................... .. Auto Body Solder............................. Ve'e each *2.08 2.25 2.50 1.58 .... Vi's each *1.18 1.23 1.37 .91 .... Ms'S each * .88 .78 .77 55 .... Vis'* each ____ $i TOUCH-UP BLACK Type of Product--Dries quickly, will not chip or flake off the surfaces. Carries a high gloss, wDI not settle in can. A ppliration - This material is ready to apply as it comes from the can Use a good quality soft brush, flowing on the enamel and eras brushing it on one panel at a time, such as a door, hood or side of the body. Thia will eliminate the danger of lags or brush marks. each Half.plnt cans only.................. ................................. .......... ................. ,.| JSS TRUCK, TRACTOR AND MACHINERY ENAMEL Type of Product--Colors are those used by some of the leading manufacturers of farm equipment. They are fade proof, weather ratstmg, have excellent hiding properties and are resistant to oil. Drying Time--4-S hours. 24 Cor recosting. Coverage--600-600 square feet per gallon - one coat. Application--Stir paint well before using. Apply with a good enamel brush. Surface must be clean, dry and free from grease or rat. Remove grease with gasoline and use sandpaper to remove all rust spots from metal. Spread enamel evenly. The enamel U ready to use as it comes from the can--U should not be thinned. I's each Black...................................................................................................................... *5.75 %' each $1.65 I. H. C. Red, HI-Way Yellow, A. C. Orange, J. D. Green, J. D. Yellow, Cletrae Orange..................... ........................................................................... 7.20 2.10 I. H. C. Blue and New Fordson Gray _________________________________ 5.90 1.75 22 GLD025450 METALUTE CHROME ALUMINUM For Interior Surface* Type of Product--An extremely smooth, chrome-like, aluminum finish for use on radiators, furnace Jackets, airducts, hot water tanks and heaters, pipes and other interior surfaces. Not recommended for surfaces subjected to temperatures between 400* F. and 600* F. For these temperatures use Glidden Heat-Resisting Mctallite. Will not tarnish under ordinary conditions. Drying Tint -8-12 hours. 24-36 tor recoating. Coverage-- 600-700 square feet per gallon--one coat. Application - Stir well before using and occasionally during use. Surface to be coated must be dry and free from grease and dirt. Apply in one direction only using a soft brush. Keep brush well filled with the Chrome Aluminum to insure a constant flow. If the product becomes too heavy, thin with turpentine or mineral spirits. 1*8 each Interior MetalUte--Chrome Finish ... *5.30 Vi'* each *1.60 Vi's each * .92 Vis's each I .54 EXTERIOR METALUTE Ready-Mixed--Aluminum Type of Product--K ready mixed aluminum for use on fsrm implements, smokestacks, structural steel, metal roof and field tanka. Should withstand 500 to 600 degrees Fahrenheit. Metaliite produces a smooth, enamel-like, polished aluminum finish. It will retain its brilliance over a long period of time. Furnishes ideal protection to structural steel, metal roofs, low-temperature smoke stacks, farm equip ment, and outer surfaces of storage tanks. Retards evaporation loss in Btorage tanks and reduces temperatures in buildings because the aluminum reflects the beat waves of the sun. Drying Tints--Overnight. 48 hours for recoating. Coverage--600-700 square feet per gallon--one coat. Application-Stir well before using and occasionally during use. The surface must be dry, free from all loose particles, dirt, grease and other foreign matter. Apply with a soft-bristle brush, keeping the brush well filled with Metaliite. Do not brush back and forth, apply in one direction to secure a smooth, bright surface. If thinning is found necessary, use Binall amount of turpentine or mineral spirits. l'a each .... Exterior Metaliite Ready Mixed____ *5.60 Vi's each *1.68 Vi'* each * .96 'At* oath * .57 HEAT RESISTING METALUTE Ready-Mixed--Aluminum Type of Product--Aa its name implies, this product b intended for metal surfaces subjected to beat. At low surface temperatures the product b baked onto the surface, while at Ugh surface temperatures the Aluminum b fused to the surface. Not recommended for use at bases of smoke stacks where heat b intense. Application--Stir well before using and occasionally during use. The surface must be dry, free from all loose particles, dirt, grease and other foreign matter. Apply with a soft-bristle brush, keeping the brush well filled with MetalUte. Do not brush back and forth, apply in one direction. If thinning b found necessary, use small amount of turpentine or mineral spirits. Coverage--600 to 800 sq. ft. to the gallon, depending on the surface. 5's each H. R. MetalUte......................... *5.09 !' each *5.1 Vi'* each 1A4 Vi'* each * .88 Vis's each $M GLD025451 IllffjfwrED ALUMINUM ASPHALT ROOF PAINT Tvp* of Product--Ho. 145 Aluminum Asphalt Root Coating is made with selected aaphatts, the finest grade of aluminum flakes and solvents. It is recommended for Ur paper, composition, or asphalt roofs. It will rejuvenate weathered roofs and insulate with a ifivery sheet of aluminum, all in one coat. It sharply reduces roof and inside building temperature in hot weather. It decreases heat losses in cold weather. Conroe*-- Cover* approximately 225 to 300 square feet to the gallon, depending on roughneea and porosity of the surface. Application--May be applied by brush or spray, and comes ready to use. Before application, broom or hoe* off all loose material and imbedded dirt When the surface it dry, ooat badly won spots with Asphalt Roof Coating No. 1420 and repair leaks. Allow two weeks Summer weathering of Asphalt Roof Coating before applying the Aluminum Asphalt Coal tar coatings should be allowed to harden before applying Aluminum Asphalt Follow with No. 146 Aluminum Asphalt on the surface with only enough brushing to secure a uniform film. It should be kept away from sparks or flames until the solvent has avaporated. This material may be used on metal roofs previously primed with metallic primer*. Note: As a word of caution, we suggest that operator* work with their backs to the sun to avoid sunburn, and wear dark gUmes to avoid eye damage. 5'a each l'a each $4.00 $4-10 MISCELLANEOUS AND SPECIALTIES AD-EL-ITE PASTE WAX Tvp* of Product--For furniture, floors and automobiles, in fact, any surface where a waxed finish is desired. It polishes quicker and easier than other similar products and will retain its gloss and finish over a period of several months. It dries hard and imparts longer protection to floor surfaces even when subjected to extreme hard usaga. 1 lb. can $1.10 SLICK LINOLEUM COATING Tv p* of Product--A dear lacquer linoleum coating. Drviug Tim*--Seta In 15 minutes. Dries firmly in 4 hour*. Conroe*--250-300 square feet per gallon. Appliealion--Apply with brush. I's each Slick Linoleum Coating_____________________________ $5.05 SUck Seducer.............................................................................. .. Vi* each $14$ ....... tt'eeaeh $1.00 .7$ i WOOD BLEACH Typt of Product--Has the amazing properties of bleaching practically any type of wood from its original color to an almost natural white and without any deposit of a salt of any kind in the pores of the wood, necessary to the production of the blond affects so popular and modern at present Application-- 1. Sand wood thoroughly and dust before applying Wood Bleach. 2. Apply a wet coat of Wood Bleach with a small mop, clean soft rag, cotton waste. 3. Dry first application 8 hours and repeat for whiter bleaching. 4. The strength of Wood Bleach may be controlled by adding Distilled Water to the final mixture. 6. Allow Wood Bleach to dry thoroughly (not leas than 12 hours) sand lightly and follow with desired finish. Remove all old finish from surface of wood with paint and varnish remover, making as many applications as are naceatary to remove all traces of the old finish. Then wash with a water solution of triaodlum phosphate or sal soda. Rinse thoroughly with dear water. Allow to dry overnight before applying Wood Bleach. CAUTION! In mixing Wood Bleach USE ONLY GLASS, ENAMEL WARE OR HARD RUBBER CONTAINERS. Add one part of No. 2 to four parts of No. 1. Stir with glass or wood rod. USE NO METAL FOR MIXING OR STIRRING. DO NOT mix more Wood Bleach than can be used in three hours. DO NOT--Pour unused mixture Into either No. 1 or No. 2 Solution. DO NOT--Keep mixed solution in dosed container. DO NOT--Store Wood Bleach in warm places or direct sunlight. USE RUBBER GLOVES in mixing and applying Wood Bleach. If Wood Bleach gets on hands wash thoroughly with cold water ana vinegar and apply Hand Lotion. NOTICE: Sometimes there is a precipitation in Solution No. 2. This material quickly goes back into solution when warmed. Submarge the bottle in warm water or by standing it on a radiator. The cork of the bottle should be loosened to prevent gas formation. Large Unit Wood Bleach....................................................................................................... $$4$ Small Unit $4.00 24 GLD02545 2 4 SURFACENE _ . Tw* of Product-A. clear liquid which can be applied to an old aurface to deaden the gloss and create a bond for a new finish coat with adearfdoth * C **"** W1 dlssolve wax, grease, or polish which can be removed from old surfaces by simply wiping them off Application--This material cam be brushed or applied with a cloth. For old surfaces that are fairly clean, Surfacene may be added to thepaint to lurnish a bond and anchor the new nnish to the old without crawling. A quarter pint to a gallon of any paint Urecom- l'a each *2.90 Vi's each SI 00 Vt' each * .62 NEVA-ROT Type of Product-- A new war-proven preservative for application on all wood, fabrics and ropes. It has many uses in the home on the farm, and anywhere insects, molds or fungus are active. Neva-Rot is toxic to organisms that destroy cellulose: it prevents the action of termites. Formulated in green and clear solutions. Corerayc- One gallon of Neva-Rot will treat 200 square feet of an average surface. Very rough wood may require one gallon per 100 square feet of surface. Application -- Applied by brushing, spraying, dipping or swabbing. Neva-Rot Green Is particularly desirable for fence posts and all wood that is to come into contact with soil. Neva-Rot Clear is recommended for all aurfacea where the Green color Is not desired. 5's per gal. Neva-Rot Clear.................................................................. $3.55 Neva-Rot Green.................................................................. 2.97 !' each $3.65 3.07 >/<' each $1 JO 1.0$ PURE COLORS IN OIL Type of Product-Unexcelled for tinting, white lead ground in oil, enamels, prepared paints and wall finishes to any desired shade. Ground extremely fine in special pale grinding linseed oil, the best selected pigments are used to develop perfect tone and strength of color. The use of these Colon in Oil with paste or semi-paste paints will produce a beautiful finish at far less than the usual cost. Tbsy ara unsurpassed in strength by the best competitive colors in oil. l's each Vi's each M's each Zinc Oxide, While.......................................................... $9.90 $2.75 $ .85 Raw Umber, Burnt Umber._______________ _____... 6.05 1.79 .60 Burnt Sienna, Raw Sienna______________ 7.40 2.10 .69 Van Dyke Brown........____________ ___________ 6.10 1.80 .62 Ivory Drop Black........... ....... ........................ ............... . 2.00 .68 Lamp Black______________________________ _______ 5.60 1.68 .57 Prussian Bine____............----------------------------- -- 2.45 .84 Ultramarine Blue____....____________ Chrome Green (Light, Medium and Dark)__________ Chrome Yellow (Light, Medium)..._________ ___... Vio ___ 2.58 3 45 .81 .82 1.05 Chrome Yellow (Dark)_______ _________ w 430 1.30 Yellow Ochre____________________________ _________ 5.60 1.68 A7 Venetian Red_____ ___________ _____ _________ ____ 5.65 1.69 .58 Tuscan Red............... ...................................................... Bose Lake------------------------ -----------------------------------American Vermilion----- ------------ --------------------------- w m,, 3.50 3AO 1.08 .98 1.08 Cobalt Blue----------------- ---------- ----------- ------------------- 2.45 .79 OIL COLORS IN TUBES Master Painters'-SUe 1x5 inch................................................................... Household Site-- % x 3 Inch_____________ ______--------- ............ Each $ -32 .17 GLD025453 ------------------------------------------------------Tha^E'6 ** ASPHALT PRODUCTS MASTiCRETE Tin* <4 Product--A permanent and efficient material for pitching, repairing and resurfacing all tjrpea of traffic-bearing surface* Of concrete, wood, metal, tile, terraxio, upbalt, composition, etc. Eliminates the need for chipping, chopping, or in any other way preparing the surface, other than cleaning free from dirt, grease, oil or paint. It prevents costly production losses because repairs can be completed overnight. It is mixed with common cement mortars and when so used results in a tough, resilient surface, having all the general char acteristics snd strength of concrete but unlike concrete, will not chip, crack, crumble or dust The surface la aHppro, slddproof, noMw, watarproof, sparkproof and will not sustain combustion. It improves with use and will resist the severe abuse of heavily loaded steel wheel trucking equipment. Supplied ready for use without heating or special equipment, It can be applied by any handy man. Contains no cDt or solvents and therefore can be used in confined areas without endangering applicator* or water or food. Drying Ifms--24 to 86 hours before use. Application--U grease, oil or paint is present use e good caustic cleaner to remove it See that the surface is free from dirt and duet Plush with dear water as the surfaoe should be damp when Primer is applied. Any excess water should be removed. Brush on two coats of MastiCrete Primer, allowing sufficient time for thorough drying. For surfaces to stand tracking and heavy traffic we recommend one part Portland Cement, two parts dean sharp sand, three parte one-quarter inch stone or travel and two parts of UmU- oet*. For foot traffic use one pert Portland Cement, four parts dean sharp sand, two parts Ifastierete. Water should be added to either m. ja a quantity sufficient to produce a consistency resembling mortar. All materials are to be measured by volume, not weight. Place the Mastierete in the hole and level off. After an initial set, smooth with a wood finishing float when the mixture is intended for heavy loads and with a steel trowel for foot traffic mixtures. rspsrgst Mastierete............................................................................................................ flJI l'ssash |1JI i MASTICRETE PRIMER Typt of Product--This la the priming or bonding coat for succeeding coats of hfastierete. Application--11 grease, oil or paint is present on the surface to be patched use a good caustic dsanar to remove it. So* that ths surface is free from dirt and dust. Flush with dean water as the surface should be damp when the Masticrst* Primer is applied. Any excess watar that stands on the surface should be removed. Mastierete Primer should be reduced 60% with dean water and stirred well until alt lumps have become broken up and dissolved before it is applied. The Primer should be applied in two coats and the first coat allowed to dry thoroughly before application of the second coat. The second should also be allowed to dry thoroughly before any of the Mastierete Patching Compound la applied. The space to be patched should be primed for a distance extending at least 2 inches beyond the edge of the patch. S's per gaL Mastlcrete Primer............................................................................................... $1.65 l's per gal. 81.66 SPRED SPRED FLAT Type e/ Product--A. washable, oil emulsion water-mix paint. Easily appHed over any surface. Leaves a rich flat tons. An idea finish over wallpaper, new or old plaster, wallboard, painted surfaces, cement and tile walls. Drying Tims--30 minutes to permit the use of. the room when properly ventilated. 4 hours for recoating over wallpaper and at least 12 hours for recoating over plaster. Cooerage-- 600 to 660 square feet depending upon surface. Application--Apply with a large brush. Apply generously and evenly; level off lightly with the tip of the brush. Keep brush well fillad at all times. Do not work excessively or work out too thin. Old Pointed or Papered Surface-- Remove all loose scale, grease, dirt, glue size, calcimine, and other water soluble compounds. Filling holes snd cracks with sptchtilng compound. Paste all loose wallpaper securely. Be sure wallpaper colors are not water soluble, or bleeding will result. Test by rubbing with doth wet with soapy water. Color should not show on doth. Nev Unpointed Surface*-- Need two coats for best results. White sad Tints % SPUED LUSTER Type of Preduel - A washable, durable, enamel-like finish, making it excellent tor kitchen and bathroom walls. An excellent primer lor plaster walls. Drying Tim*-- Dries to touch in one hour. Allow at least eight hours before recoating if a second coat is necessary. When used on wood, surface should be sanded between coats. Courage--Same as for Spred Flat. Applicdion--Same as for Spred Flat l's each Wa each White and Tints................................................................................................. $8.40 $145 SPRED SATIN Type of Product--Spred Satin imparts to interior walls and woodwork a modem, glarelees finish. Remarkable ease of application, excellent coverage, and durability make Spred Satin outstanding. Washes perfectly with mild soap and water after SO days. Drying Tinu--Dries to touch In 80 minutes, and a second coat may be applied after a drying period of 12 hours under proper ventila tion and good drying conditions. Remove paint spatters promptly with a damp cloth. Cotttage--500-600 square feet depending upon the surface. Application--Apply generously and evenly with a large flexible brush. Level off lightly with the tip of the brush. Seep brush well filled, at all times. Do not brush excessively or brush out too thinly. Old Painted or Preoared Surfat**-Remove all loose scale, dirt, grease, glue sise, calcimine, and water soluble compounds. Fateh boles and cracks with spatehllng compound. Use metal primers over bare metal. Dull any glossy surface with steel wool or washing powder solu tion before painting. Do not use over wallpapers which will stain a white cloth wet with soap and water or which contain mstsilio colors (silver or gold). Nets Unpointed Surfae**--Meed two coats for best results. 1'soach White and Tints................................................................................................. *4.70 Decorator Colors............ ................................................................................. 4.7# 1.4$ SPRED TEXTURE BASE Type of Product--A neutral blending base to be mixed in equal parts with Spred Flat paste to obtain a textured effect on walls. Prices on request. PRIMER-SEALER SPRED (VAPOR BARRIER) Typ* of Product -- An excellent primer and sealer for porous sufaces of dry-wall construction, cured plaster and masonry surfacesDrying Time--Driee to touch in 30 minutes--12 hours for recosting. Coverage--400 square feet per gallon on plaster; 100 square feet per gallon on soft, porous wsllboard. Application--Surface Preparation-- Remove all loose scale, dirt, grease, glue size, calcimine and water soluble compounds. Fateh holes and cracks with spachtling compound. Mixing--Spred Vapor Barrier is ready for use, no thinning required. Stir thoroughly. Avoid whipping or shaking. CAUTION: Do not add turpentine, other paint solvents or oils. Application -- Brushing-- Use a large flexible brush--keep it well filled--apply generously and evenly in a continuous film. Do not brush excessively or brush out too thin. Thoroughly dean all brashes with soap and water before and after using. Spraying--Apply full body. Thoroughly dean equipment with warm, soapy water immediately after using. I's each $4.45 REFLECT-O-LITE PASTE PAINT Type of Product--A superior, washable paint in paste form for aU wall and ceiling surfaces for home*, store*, garages and hotels. It is odorless, covers completely in one coat, possesses maximum light reflectivity without glare or eyestrain and is most economical since water, not expensive thinners, is used for reduction. The resultant film is flat, shows no laps or brush marks and will not yellow with age. Unusual adhesion permits it to be painted over even with oil paints without danger of peeling. It can be used over damp plaster since water can evaporate through the porous film. Sizing is unnecessary on surface* of uniform porosity. Drying Time--Dries in 40 minutes. Coverage-- 800 to 600 square feet per gallon, depending on porosity of surface. Application--Apply with brash. It should be reduced with I part of water to 2 of the past*. White and Tints. X's each 5940 %'a sack $1.09 Iff GLD025A55 BLACKBOARD SLATING Ti/?4 of Product--A tough, abrasion resisting finish drying with a semi-gloss. Covers solidly with one cost. Drying Time --6-6 hours. Corerajc--600 square feet per gallon. Application--The surface to be refinished should be free from all foreign matter and perfectly dry. One coat will give a good wearing, smooth writing surface, but two coats will wear longer because of the heavier film that is developed. l's each Blackboard Slating-------------------------------------------- ------------ ......------ ... $4.15 Vi's each 11.31 VISMATIC GREEN CHALKBOARD COATING Typt of Product - A new type of chalkboard coating that is colored green to allow maximum light reflection and ease of cleaning. Drying Tiuu--Overnight dry between coats. Coverage - Brushing-360-400 square feet. Spraying--slightly less. Application - Brush Method--Brush evenly, using a soft, well broken-in 3-inch brush, extending strokes in all directions, using care to have brush fairly full at all times. Apply full body or reduce if necessary with Pint of mineral spirits per gallon. One coat is usually sufficient; however 2 coats will give longer wear. Allow overnight drying between coats. Spray Method -- Reduce Coating with 1 pint of V M & P Naphtha to the gallon. One coat will usually be sufficient. Preparation--Chalkboard must be cleaned to a dust-free surface. Any wax crayon or grease muat be removed with turpentine or mineral spirits, unsealed surfaces must be sealed with Glidden Spred Primer-Sealer or Glidden Interior Base Coat, not necessary on alate surfaces. Surfaces with s sheen should be sanded prior to applying the Coating. Conditioning Chalkboard* for Use-- After coating has dried for 48 hours, apply chalk, broadside,over entire surface. Use felt eraser to work chalk into surface and remove excess with clean eraser. Cleaning Chalkboard-- Avoid washing as much as possible; when necessary use a sponge-rubber eraser. The chalk treatment previously described should be repeated alter washing. Dry cleaning may be done by wiping with a dry chamois or soft dry rag. Oil treated rags should not be used. Ylsmatle Green Chalkboard Coating 1's sack $8.25 Vi's each $2.34 GLID-N SPECIALTIES 5% D.D.T. A residua] or an AA space spray; provides quick-killing and long lasting control of the following household insects; Silverfish, Pleas, Bedbugs, Wasps, Gnats, Mosquitoes, Moths, Carpet Beetles, Roaches, Ants, and Flies. Stainless, greaseless, and free of objectionable odor. l's each $2.10 %'* *ach $ .65 Vi's each $ .35 LIQUID CLEANER An excellent degreaser as well as a cleaner. It does a remarkably easy job on walls, woodwork, floor*, linoleum, tile, windows, mirrors, and automobiles. It dries frss from streaks or haze and restore* the original beauty of the surface. Harmless to the skin. For general cleans ing, use at the rats of 2 or 3 teaspoonfuls per gallon of water. l's each $3.25 Vi'* each $ .89 Vi'* e*ch $ .49 FLOOR WAX A modem protective coating for ail types of floors or floor finishes. Dries to a gloss without polishing. A higher gloss is easily obtained by wiping with a dry doth. The bard wax film resists wear, keeps dirt on the surface where It can be removed with a stiff brush or damp mop. It is water resistant, washable and slip retarding. l's each $2.75 %'e each $ .89 Vi'e e*ch $ .49 2* GLD025456 AUTO POLISH For use by the automobile end truck owner, the eirplene owner; in feet, ell those individuals who possess means of transportation of any description which are finished with lacquer. Glid-N polish removes old and dead fllmt of lacquer without streaking, without any trace of greasiness; works as well upon japanned surfaces as on lacquer. I's each (2.90 Vi'S each j .86 Vi's each $ .45 each $ ,)0 BRUSH RESTORER Restores old paint brushes that have become hardened by age and Improper cleaning after use in latnt, enamel, varnish, lacquer, shellac, asphalt roof paints, water thinned paints, etc. It leaves bristles in perfect condition for further use a all types of finishing material. Vi's each $ .65 Vs'* each 9 .35 FURNITURE POLISH A polish that is unexcelled for the finest furniture whether finished In varnish, lacquer or the synthetics of today. Cleans and polishes in one operation and leavee no oily euriace to gather lint and dust. It is applied with a soft doth whieh has previously been wrung out in cold water and then well saturated with Glid-N Furniture Polish. l's each $2.90 Vi' each $ .85 Vi'* eh $ ,45 %*'* each $ JO MILDEW-X A liquid to be added to paints or enamels to contTol mildew and other fungus growths so prevalent In warm and humid dimatss. Surfaces previously affected by mildew should be cleaned carefully by washing to remove all existing deposits. The addition of 6liquid ounces of Mildew-X to one gallon of paint is recommended, Vi's each $1.29 Ms'* each $ .60 Wi'* each $ .40 NOTE--Except for PU-Nirael, wherever turpentine Is rec ommended as a reducer, mineral spirits may be substituted. GLD025457 Motional BMiqaaiten THE GLIDDEN COMPANY 11001 Madison Art., Cleveland t, Ohio Cleveland 2, Ohio, 11001 Madison Ave. Chicago 16, DL, 1833 S. Normal St. Chicago 39, HI., 1866 No. LeClaire Ave. Nsw Orleans 8, La., 424 Josephine St. Minneapolis 13, Minn., 1901 E. Hennepin Ave. f ac t o r ies Reading, Pa., Third and Barn Sta, St. Louis 2, Mo., Main and Gratiot Sts. San Francisco 7, Calif., 1800 7th St Toronto 9, Ont, Canada, 861 Wallace Avs. Arkansas City, Kan. Atlanta, Ga. Baltimore, Md. Billings, Mont. Birmingham, Ala. Buffalo, N. Y. Cambridge, Mass. Charlotte, N. C. Chattanooga, Tenn. Chicago, HI. Cleveland, Ohio Columbus, Ohio Dallas, Texas SKAXCHES AND DISTRIBUTOR POUTS Detroit, Mich. Miami, fla. Duluth, Minn. Minneapolis, Minn. El Paso, Texas Mobile, Ala. Evansville, Ind. Montreal, Quebec, Canada. Honolulu, T. H. Mt Yeraon, HL Houston, Texas New Orleans, La. Huntington Park, Calif. Norfolk, Va. Indianapolis, Ind. Jacksonville, FT*. North Bergen, N. J. Oklahoma City, Okta. Knoxville, Tenn. Omaha, Neb. Long Beach, Calif. Orlando, Fla. Los Angeles, Calif. Philadelphia, Pa. Louisville, Ky. Portland, Ore. Memphis, Tenn. Reading, Pa. Richmond, Va. Sioux Falk, S. D. St Louie, Mo. St Petersburg, Fla. San Antonio, Texaa San Diego, Calif. San Frandaoo, CaHf. Scranton, Pa. Sioux Palls, S.D. Tampa, Fla. Toledo, Ohio Washington, D, C. West Palm Beach, Fla. Winnipeg, Manitoba, Quebec. I PAINTS VARNISHIS IACQUERS fNAMtlS JO i