Document bpXRMeX82Bdo65kvbr522mo6

^jjflPfl^ B alkamp iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiimiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii STEERING COUPLING DISK-174 3-2200 FOR POWER AND CONVENTIONAL STEERING APPLICATION CHART BUICK CADILLAC CHEVROLET CHRYSLER FORD OLDSMOB1LE PONTIAC TEMPEST 1957-66 1957-66 1957-66 1965-66 1965-66 1957-66 1957-66 1961-66 3-2200 IMPROVES STEERING - ELIMINATES - STATIC - SHOCK - EXCESSIVE STEERING WHEEL PLAY - ..................... . STEERING TUBE AND WORM-174 Car Years Models Part No. DODGE FORD PASS. FORD TRUCK PLYMOUTH 55-56 1955 1954 48-52 55-56 All Pass. (Ex. P.S.) All (39-7/8" Long) All (41-5/8" Long) FI, F2, F3 (43-23/32" Long) All (Ex. P.S.) 1557917 B5A-3524A AD-3524A 7HC-3524 1557917 iiuiiiiiiiiiiiiiiiiiiiiiNiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiimimiiiiiiii STEERING CAMBER ADJUSTING BOLT-174 BUICK1957-58 CADILLAC CHEVROLET 1957-58 1955-58 3-5820 With the CAMBER ADJUSTING BOLT, you can INCREASE POSITIVE CAMBER AFTER ALL SHIMS ARE REMOVED. By the use of the ECCENTRIC CAMBER ADJUSTING BOLT the steering Knuckle Lower Control Arm can be moved just 1/8" toward the center of the car. This will INCREASE CAMBER 1 FULL DEGREE. Regular shims can once again be used for final adjustment. BOLT KIT (8 Bolts, Lockwashers, Nuts) As front suspension parts wear and the front coil springs "set" NEGATIVE CAMBER RESULTS. POSITIVE CAMBER IS IN CREASED as shims are removed. When ALL sh ims are removed, additional adjustment is IMPOSSIBLE. Makes possible 1/8", or 1 DEGREE ADDITIONAL POSI TIVE CAMBER. Permits mechanic to INCREASE POSITIVE CAMBER after all shims have been removed. No new parts needed. The front suspension system need not be disassembled to make installation. Low cost. Can be installed in less than 1 hour. Only 8 holes to drill. A positive and permanent repair. Can be used on various other applications. No bending necessary. ^ Replacement Parts saaggcEMssaMscEB 63