Document barE5e7LvRVxKY0obK9zGY66O

FEATURES PROPERTIES Properties Unit Nominal Value INOFLON PFA 8015HS HANDLING AND STORAGE INOFLON PFA 8015HS can be stored for a relatively long period of time provided they are stored in a clean place, dry place and protected by direct sunlight and possible contamination. PROCESSING INOFLON PFA 8015HS can be processed by conventional melt processing techniques like extrusion, injection, compression, and transfer molding. Corrosion resistance metals should be used in contact with molten PFA resin. PFA generally processed at a high temperature approximately around 390C (734F). SAFETY PRECAUTIONS Handling and processing of PFA must be done in ventilated areas to prevent personnel exposure to the fumes liberated during sintering and heating of the resin. Fumes should not be inhaled and eye and skin contact must be avoided. In case of skin contact wash with soap and water immediately. In case of eye contact, flush with water immediately and seek medical help. Smoking tobacco or cigarettes contaminated with PFA may result in a flu-like condition including chills, fever and sore throat that may not occur until a few hours after exposure has taken place. Mixtures of some metal powders such as magnesium or aluminum are flammable and explosive under some conditions. Please read the Material Safety Data Sheet and the detailed information in the "Guide for the Safe Handling of Fluoropolymer Resins" available at www.plasticseurope.org. INOFLON is the brand name of Gujarat Fluorochemicals Limited (GFL) used for its brand of fluoropolymer resin. INOFLON can be used in applications duly approved by GFL. Customers who plan to use the word INOFLON as the trademark on or relation to their fluoropolymer parts and other products in any style or combination or any manner whatsoever must contact GFL for prior permission for such use. No consumer/user of GFL fluoropolymer resin is permitted to claim that their products contain INOFLON without prior permission from GFL. The information provided in the bulletin is furnished at no cost to the recipient and is based on the information and technical data that Gujarat Fluorochemicals Limited believes is correct and sound. Those who choose to use the information must be technically qualified, and do so entirely at their own cost and risk. The users must determine and ensure that their specific conditions of processing present no health or safety hazards. GFL does not warranty, either expressly or impliedly in respect of the use of this information for application of its INOFLON branded fluoropolymer resin and shall bear no liability as a result of any loss or damage caused directly or indirectly due to use of any information provided in this bulletin. Nothing contained herein can be taken or construed as a grant of license by GFL to operate under or a recommendation to infringe any patents. WARNING: Do not use any of INOFLON PFA resins in medical devices that are designed for permanent implantation in the human body. For other medical uses, prior permission of GFL may be sought. SALES AND TECHNICAL SUPPORT Corporate & Marketing Headquarter Gujarat Fluorochemicals Limited INOX Towers, 17, Sector-16A, Noida - 201301 U.P., India Europe Gujarat Fluorochemicals GmbH Regus Center Watermark 14th Floor, Uberseeallee 10, 20457 Hamburg, Germany +49 40 808074-667/668 Works Gujarat Fluorochemicals Limited 12/A Dahej, GIDC, Industrial Estate, Tehsil Vagra, Dist. Bharuch 392130, Gujarat, India Americas GFL Americas, LLC 1212 Corporate Dr., Suite-540, Irving, TX 75038, USA Updated on 04.2020 GUJARAT iLUOROCHMICAL VALUE THROW. EEEEE ENE TR