Document bBvGMBKa3ad9YwxnonQBbOrV3

DUP210010789 A A ( 5 < f l E B 3 3 3 E. I. DU PONT DE NEMOURS & COMPANY (INC.) WILMINGTON 98, DELAWARE advertising department *ts. u.s, PAT-OfT. Better Things for Better Living , . . through Chemistry DUP210010790 introduction Th IS index contains information on chemicals and allied products manufactured and sold by E. I. d u Po n t d e Ne mo u r s & Co mp a n y (In c .) and its subsidiaries. The purpose of this index is to provide a convenient source of information on the properties, uses and other data for Du Pont products, where it was found practical to include such material. Descriptions of products are limited to the bare essentials. For more detailed information, contact main or branch offices of the departments, divisions or sub sidiaries which market the products. The addresses of these offices are given in the white section at the introduction for each department, division and subsidiary. This INDEX contains five sections which are: PAGE DEPARTMENTAL SECTION (white pages)............................................... 1 Here descriptions of products are classified under their respective depart ment, division or subsidiary. Addresses of offices and plants appear at the introduction for each department, division and subsidiary. TRADEMARK SECTION (green pages)....................................................105 A major portion of Du Pont trademarks are listed in alphabetical order. Each trademark is followed by the generic name of the product to which it is applied and the department or subsidiary by which it is marketed. ALPHABETICAL SECTION (yellow pages)........................................... 113 The names of Du Pont products are listed in alphabetical order. The page number after each product refers to the page in the white section carry ing the description of the product under the department or subsidiary by which it is marketed. INDUSTRIES SECTION (pink pages)................................................ .137 Use of a majority of Du Pont products are classified under 18 major industries. The page number after each listing refers to the page in the Index carrying further information about the listing. GEOGRAPHICAL SECTION (blue pages)............................................. 161 Geographical section which shows locations of domestic and foreign offices, affiliated companies, plants and certain stock paints. 4 t ! if t u * ' .j | , || | DUP210010791 DEPARTMENTAL SECTION Operating Units and Subsidiaries Elastomer Chemicals Department............. 1 Accelerators for Rubbers................................... 1 Antioxidants for Rubbers................................. 2 Miscellaneous Chemicals for Rubbers............ 2 Synthetic Rubbers............................................. 4 Eleetrochemicals Department..................... 6 Acrylic Products................................................. 6 Ceramic Products............................................... 6 Chlorine Products.............................................. 8 Electroplating Products.................................... 8 Furan Products....................................................10 Peroxygen Products............................................10 Sodium and Cyanide Products.........................11 Vinyl Products.................................................... 12 Explosives Department.................................. 14 Blasting Supplies and Accessories.................... 14 Explosives..................................... 16 Blasting Agents................................................... 17 Chemical Sales..................................................... 19 Smokeless Powders..................................... 21 Fabrics and Finishes Department.............. 22 Fabrics Division.................................................. 22 Finishes Division.................................................24 Automotive Finishes...................................24 Automotive Refinisbing Materials...........27 Industrial Finishes......................................30 Specialties Sales...........................................34 Trade Sales Finishes...................................38 Film Department..............................................45 "Cel-O-Seal" Bands Division...........................47 industrial and Biochemicals Department 48 Industrial Chemicals...........................................48 Anti-Freeze Products......................................... 59 Bioehemicals.........................................................60 Organic Chemicals Department................. 66 Dyes and Chemicals Division........................... 66 "Freon" Products Division............................... 79 Petroleum Chemicals Division..........................81 Photo Products Department......................... 84 Camera Negative Films..................................... 84 Radiographic Products.......................................85 Industrial Products............................................. 87 Trade Products....................................................88 Luminescent Chemical Products...................... 90 Printing Plate Products..................................... 90 Pigments Department.................................... 91 Pigment Colors....................................................91 Titanium Pigments............................................. 92 Specialty Products ..................................... 92 Polychemicals Department........................... 93 Plastics Products Division.................................95 Remington Arms Company, Inc..................96 Peters Cartridge Division................................ 101 Surplus Materials Division......................... 103 Textile Fibers Department...........................104 III DUP210010792 r Abbreviations atm. Be.......................................... B. P...................................... "C............................................ cc........................................... cm.......................................... C. P...................................... cu. ft................................ . .. dia.......................................... p............................................ fl. oz....................................... F.P......................................... ft............................................ ft-lb........................................ g............................................. gal.......................................... S/I.......................................... g/ml....................................... in............................................ 1.............................................. lb............................................ max........................................ min........................................ ml.......................................... mm........................................ M. P..................................... N. F..................................... No.......................................... oz........................................... pt........................................... qt........................................... sec.......................................... Sp.Gr. 1.5, 1.021, etc........... Sp.Gr. 1.625 (15/15C.), etc. sq. ft...................................... sq. in...................................... temp...................................... U.S.P..................................... wt........................................... yd........................................... . atmosphere barrel . degrees Baume , boiling point . degrees Centigrade . cubic centimeter . centimeter . Chemically Pure . cubic foot . diameter . degrees Fahrenheit .fluid ounce . freezing point .foot . foot-pound .gram . gallon . gram per liter .gram per milliliter . inch . liter . pound . maximum . minimum . milliliter . millimeter . melting point .National Formulary . number .ounce .pint . quart . second . specific gravity at 20C. referred to water at 4C. .specific gravity at 15C. referred to water at 15 C. .square foot .square inch . temperature . United States Pharmacopoeia . weight .yard Advertising Department, January 7967 IV i DUP210010793 ELASTOMER CHEMICALS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Akron 8, Ohio a 4.i...4._ o /*i___ :- .tt.Ufcl.ULsA O, Ucuigia Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 3, Illinois Detroit 35, Michigan Houston 6, Texas Los Angeles 58, California New York, New York Palo Alto, California Trenton 8, New Jersey- 40 East Buchtel Avenue at High Street 1J i0U1i cu.p.l.:1J--L--4--- ULILLI, -JN.XT . TrT\7 . 140 Federal Street . 427 West Fourth Street 7 South Dearborn Street 13000 West Seven Mile Road 2601A West Grove Lane 2930 East 44th Street To Reach Trenton Office Call 701 Welch Road 1750 North Olden Avenue PLANTS: Beaumont, Texas Carneys Point, New Jersey Louisville, Kentucky Montague, Michigan TELEPHONE PRospect 4-1000 POrtage 2-8461 HAncock 6 -1719 FRanklin 5- 5561 ANdover 3- -7000 UNiversity 4- 1963 MOhawk 7 7429 LUdlow 2- 6464 WAlker 5 3290 DAvenport 6 7550 EXport 3- 7141 PRODUCTS ACCELERATORS FOR NATURAL AND SYNTHETIC RUBBERS B Rubber Accelerator: Formaldehyde-para-toluidene condensation product. Creamy white non-dusting powder; Sp. Gr. 1.11. Us e: To accelerate and improve the vulcani zation of natural and synthetic rubber. Co n t a in e r s : 125-lb. drums. "808" Rubber Accelerator: Butyraldehyde-aniline con densation product. Amber liquid; Sp. Gr. 0.98. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber, especially for hard rubber. Co n t ain e r s : 425-lb. drums. ' "833" Rubber Accelerator: Butyraldehyde-monobutyla- mine condensation product. Reddish-amber liquid; Sp. Gr. 0.86. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber, especially for neoprene cements. Co n t a in e r s ; 225-lb. drums. "552" Rubber Latex Accel erator: Piperidinium pentamethylene dithiocarbamate -- CH2(CH2)4NC(S)SNH2(CH2)4CH2. A cream colored crys talline powder; Sp. Gr. 1.20; melts with decomposition at not lower than 167C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds; as peptizer or plasticizer for neoprene. Co n t a in er s : 125-lb. drums. Accelerator for "Viton": Hexamethylenediamine carba mate +HsN(CH,)sNHC02-. A white very fine powder; Sp. Gr. 1.15; Melting Pt. range 152C.-155C. Us e: To accelerate and improve the vulcanization of "Viton" fluoroelastomer. Co n t a in e r s : 5-lb. drums. "Barak" Rubber Accelerator: Dibutylammonium oleate, (C4H9)2NH2COO(Ci7H33). Dark amber liquid, Sp. Gr. 0.88. USE: As an activator for other rubber accelerators to improve the vulcanization of natural and synthetic rub ber. Co n t ain er s : 175-lb. drums. Conac S Rubber Accelerator: N-Cyclohexyl-2-benzothiazole sulfenamide --C6H4SNCSNHCHCaH4CH2. A cream colored powder; Sp. Gr. 1.27; M.P. 200-212F. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber. Co n t a in e r : 50-lb. bags. DOTG Rubber Accelerator: Di-ortho-tolylguanidine-- (CH3C6H4NH) CNH. A white non-dusting powder; Sp. Gr. 1.10; M.P. 171C. min. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber. Co n t a in e r ; 100-lb. drums. M BT (2- Mercaptobenzothiazole)--CsH4SC(SH)N: Pale yellow powder; Sp. Gr. 1.50. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in er s : 50-lb. bags. MBTS (2-Benzothiazolyl disulfide)--(C6H4SCN)2S2: Pale yellow powder or grains; Sp. Gr. 1.54. Us e: To accel erate and improve the vulcanization of natural and synthet ic rubber and latex compounds. Co n t ain e r s : 50-lb. bags. NA-22(2- Mercaptoimidazoline)--CH2CH2NC(SH)NH: A white powder; Sp. Gr. 1.42; M. P. not lower than 195C. Us e: To accelerate and improve the vulcanization of neoprene. Co n t a in er s : 125-lb. drums. DUP210010794 ELASTOMER CHEMICALS DEPARTMENT ANTIOXIDANTS, CHEMICALS "Permalux" Neoprene Accelerator: Di-o-tolylguanidine salt of dicatechol borate -- (H0CeH40)2BN(NHCeH4CH3)2. Light grayish brown powder; Sp. Gr. 1.27; F. P. not lower than 165C. Us e: To accelerate and improve the vulcanization of neoprene. A nondiscoloring antioxidant for natural and synthetic rubbers. Co n t a in er s : 125-lb. drums. "Tepidone" Rubber Accelerator: 47% water solution of sodium dibutyldithiocarbamate--(C4H9)2NC(S)3Na. An amber liquid; Sp. Gr. 1.09. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber latex compounds. Co n t ain e r s : 440-lb. drums. "Tetrone" A Rubber Accelerator: Dipentamethylene thiuram tetrasulfide--[CH2(CH2)4NCS]sS4. Light gray powder; Sp. Gr. 1.53; M. P. not lower than 110C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 125lb. drums. "Thionex" Rubber Accelerator: Tetramethylthiuram monosulfide--[(CHs^NCSJaS. Lemon yellow powder or grains; Sp. Gr. 1.39; M. P. not lower than 105C. Us e: To accelerate the vulcanization of natural and synthetic rubbers. Co n t a in e r s : 50-lb. boxes. Thiuram E Rubber Accelerator: Tetraethylthiuram disulfide--[(C2H5)2JMCS]2S2. White powder or grains; Sp. Gr. 1.30; M. P. not lower than 65C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t ain e r s : 100-lb. drums. Thiuram M Rubber Accelerator: Tetramethylthiuram disulfide--[(CH3)2NCS]2S2. White powder or grains; Sp. Gr. 1.41; M. P. not lower than 141C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. boxes. "Zenite" Rubber Accelerator: 90% zinc salt of 2mercaptobenzothiazole--[CeH4SC(S)N|gZn, and 10% inert hydrocarbon. A light cream colored, waxy powder; Sp. Gr. 1.53. Us e: To accelerate and improve vulcanization of natural and synthetic rubber and latex compounds. Co n t a in er s : 50-lb. bags. "Zenite" A Rubber Accelerator: 97% zinc salt of 2-mercaptobenzothiazole (See "Zenite" above this page) and 3% Tetramethylthiurammonosulfide. (See "Thionex" above.) A light cream colored very fine non-dusting pow der; Sp. Gr. 1.42. Us e: To accelerate and improve the vul canization of natural and synthetic rubber. Co n t ain er s : 150-lb. drums. "Zenite" Special--Rubber Accelerator: Zinc salt of 2-mercaptobenzothiazole (See "Zenite", this page, above). A light-cream colored powder; Sp. Gr. 1.68. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. ANTIOXIDANTS FOR NATURAL AND SYNTHETIC RUBBER "Akroflex" C Rubber Antioxidant: 35% diphenylparaphenylenediamine--C6H4(NHCeH6)2, and 65% phenylalpha-naphthylamine (See "Neozone" A, below). Dark gray waxy pellets; Sp. Gr. 1.23; F. P. not lower than 75C. Us e : To improve the aging and service life of natural and synthetic rubbers; anti-crosslinking agent for SBR (styrene butadiene rubber). Co n t a in e r s : 250-lb. drums. "Akroflex" CD Rubber Antioxidant: 35% diphenylpara-phenylenediamine (See "Akroflex" C, above), and 65% phenyl-beta-naphthylamine (See "Neozone" D, be low). Dark gray pellets; Sp. Gr. 1.22. Us e: To improve the aging and service life of natural and synthetic rubbers. "Antox" Rubber Antioxidant: Condensation product of butyraldehyde-aniline. Amber liquid; Sp. Gr. 1.04. Us e: To improve the aging and service life of natural and syn thetic rubbers. Co n t a in e r s : 275-lb. drums. "Neozone" A Rubber Antioxidant: Phenyl-alphanaphthylamine--C10H7NHC6H5. Yellow pellets which turn dark purple on exposure to air or light; Sp. Gr. 1.22; F. P. not lower than 50C. Us e: To improve the aging and service life of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. "Neozone" D Rubber Antioxidant: Phenyl-beta-naph thylamine-- CioHjNHCsHs. Fine light gray powder; Sp. Gr. 1.24; F. P. not lower than 106C. Us e: To improve the aging and service life of natural and synthetic rubbers ; stabilizer in manufacture of SBR. Co n t a in e r s : 160-lb. drums. "Thermoflex" A Rubber Antioxidant: 25% di-paramethoxydiphenylamine--(CH3OC6H4)2NH, 25% diphenyl-para-phenylenediamine--C6H4(NHCeH6)2, and 50% phenyl-beta-naphthylamine--C10H7NHC6H5. Dark gray pellets; Sp. Gr. 1.21; F. P. not lower than 67C. Us e: Promote outstanding heat aging and flex life of natural and synthetic rubbers. Co n t ain e r s : 250-lb. drums. "Zalba" Rubber Antioxidant: A hindered phenol. Amber colored viscous liquid; Sp. Gr. 0.94. Us e: To im prove aging and service life of natural and synthetic rubbers. Bxcellent nondiscoloring antioxidant for natural and synthetic rubbers and latex. A stabilizer for the manu facture of SBR. Co n t a in e r s : 50-lb. drums. "Zalba" Special Rubber Antioxidant: A fortified hindered phenol; Yellow cream colored powder; Sp. Gr. 1.27. Us e: To improve aging and service life of natural and synthetic rubbers. Excellent non-discoloring antioxi dant for natural and synthetic rubbers and latex, a stabilizer for manufacture of SBR. Co n t a in er s : 100-lb. drums. MISCELLANEOUS CHEMICALS FOR NATURAL AND SYNTHETIC RUBBER Rubber Latex Stabilizers and Mold Lubricants. Aquarex D Aquarex G Aquarex L Aquarex MDL Aquarex ME Aquarex NS Aquarex SMO Aquarex WAQ "Aquarex" D Surface Active or Mold Release Agent: Sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives of the type RSOtNa. White powder; Sp. Gr. 1.33. Us e: To improve the stability of latex mixtures and to prevent coagulation due to mechanical friction; in water solution as a mold lubricant. Co n t ain e r s : 100-lb. drums. DUP210010795 ELASTOMER CHEMICALS DEPARTMENT MISCELLANEOUS CHEMICALS "Aquarex" G Surface Active Agent: Water solution of sodium alkyl sulfonate of the type RSOsNa. Clear amber liquid; Sp. Gr. 1.09. Us e: In emulsion polymeri zation of synthetic elastomers and resins. Co n t a in e r s : 425-lb. drums. "Aquarex" L IVioid Release Agent: Ammonium salts of alkyl acid phosphates of the type RHPO3ONH4. Amber viscous paste; Sp. Gr. 1.01. Us e : As a corrosion inhibiting /jnn.rk'r~\-K7fT\ A TTTTT'Tje "Aquarex" MDL. Surface Active or Mold Release Agent: Water paste of sodium salts of .sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D, above). Amber paste; Sp. Gr. 1.08. Us e: A stabilizing and wetting agent for latex mixtures; in water solution as a mold lubricant. Co n t a in e r s : 375-lb. drums. "Aquarex" ME Surface Active or Mold Release Agent: Sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D, above). Creamy white powder; Sp. Gr. 1.06. Us e: A stabilizing and wetting agent for latex mixtures and in water solution as a mold lubricant. Co n t ain er s : 150-lb. drums. RPA No. 3 Rubber Peptizing Agent: 36.5% xylenethiols--(CH3)i!C6H3SH, and 63.5% petroleum oil. Amber liquid; Sp. Gr. 0.91. Us e: As a peptizing agent for natural and SBR; a reclaiming agent. Co n t ain e r s : 400-lb. drums. RPA No. 3 Concentrated--Rubber Peptizing Agent: 71% xylenethiols--(CH3)3C6HsSH, and 29% petroleum oil. Dark amber liquid; Sp. Gr. 1.04. Us e: As a peptizing agent for natural and synthetic rubbers; as a rubber rcCiaiiVuiig cigcHt. CONTAINERS! 450-iu. uXuriiS. RPA No. 6 Rubber Peptizing Agent: 90% pentachlo rothiophenol--CeClsSH, and 10% inert hydrocarbon. A light gray powder; Sp. Gr. 1.79. Us e: As a peptizing agent for natural and SBR. Co n t a in e r s : 125-lb. drums. RR-10 Reclaiming Chemical: Mixed dixylyl disulfides --[(CH3)eC6H3]2S2). Dark amber liquid; Sp. Gr. 1.05. Us e: An agent for accelerating devulcanization of natural rubber, SBR (styrene butadiene rubber) and mixed scrap during the reclaiming process. Co n t ain e r s : 450-lb. drums. C. Blowing Agents for Natural and Synthetic Rubber. Ur.icel ND Ur.icel NDX Unicel S "Aquarex" NS Surface Active Agent: Water solution of C-cetyl-betaine--(CHs)3N+CH(Ci6H33)COO-. Brown slightly cloudy liquid; Sp. Gr. 1.05. Us e: As a stabilizer for latex mixtures. Due to its amphoteric properties, it functions as a stabilizer in both acid and alkaline dis persions, Co n t ain e r s : 450-lb. drums. "Aquarex" SMO Surface Active Agent: 33% Water solution of mono-sodium salt of sulfated methyl oleate-- CH3(CH2)8CH(S04Na)(CH2)JC00CH3. Reddish amber liquid; Sp. Gr. 1.08. Us e: A surface conditioning agent for rubber latex and neoprene latex mixtures. Co n t ain e r s : 450-lb. drums. "Aquarex" WAQ Surface Active or Mold Release Agent: A water solution of the sodium salts of the sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D). Amber viscous liquid; Sp. Gr. 1.04. Us e: A stabilizing and wetting agent for latex mixtures; diluted, as a mold lubricant. Co n t ain er s : 400-lb. drums. Rubber Peptizing and Reclaiming Agents. Endor RPA #2 RPA #3 RPA #3 Cone. RPA #6 RR-10 "Endor" Rubber Peptizing Agent: Activated zinc salt of pentachlorothiophenol--(CeCUS^Zn, and 80% inert filler. Grayish green powder; Sp. Gr. 2.39. Us e: A peptizing agent for plasticizing natural rubber and all types of SBR (styrene butadiene rubber). Co n t a in e r s : 100-lb. drums. RPA No. 2 Rubber Peptizing Agent: 33j^% 2-naphthalenethiol--Ci0H7SH, and 66inert hydrocarbon. Light cream colored, waxy flakes; Sp. Gr. 0.92. Us e: As a peptizing agent for natural and SBR. Co n t a in e r s : 50-lb. boxes. "Unicel" ND Rubber Blowing Agent: 42% di-Nnitrosopentamethylene-tetramine -- NCH2N(NO)CH2N(CH2)CH2N(NO)CH2, and 58% in ert filler. Cream colored powder; Sp. Gr. 1.94. Us e: A nondiscoloring blowing agent for manufacture of natural or synthetic rubber sponge. Co n t ain er s : 100-lb. drums. "Unicel" NDX Rubber Blowing Agent: 80% di-Nnitrosoper.tamethylene-tetramine--(See "Unicel" ND), and 20% inert filler. Cream colored spongy crumb; Sp. Gr. 1.40. Us e: A nondiscoloring blowing agent for natural or synthetic rubber sponge. Co n t a in e r s : 100-lb. drums. "Unicel" S Rubber Blowing Agent: 50% dispersion of finely divided sodium bicarbonate in oil. A cream colored, free flowing liquid; Sp. Gr. 1.30. Us e: Blowing agent for manufacture of natural or synthetic rubber sponge. Co n t a in e r s : 500-lb. drums. D. Organic Isocyanates. "Hylene" M "Hylene" M-50 "Hylene" MP "Hylene" T "Hylene" TM "Hylene" TM-65 "Hylene" M Organic Isocyanate: Methylene bis (4phenyl isocyanate)--(CsH4NCO)2CH2. Pale yellow lumps; Sp. Gr. 1.20. Us e: For making urethane adhesives and polymers. Co n t a in er s : 45- and 500-lb. drums. "Hylene" M -50 Organic Isocyanate: Methylene bis (4-phenyl isocyanate)--(CsH4NCO)2CH2. 50% solution in monochlorobenzene; dark brown liquid; Sp. Gr. 1.16. Us e: In elastomer based adhesives. Co n t ain e r s : 45- and 500-lb. drums. "Hylene" MP Organic Isocyanate: Bis phenol adduct of methylene bis (4-phenyl isocyanate). Grayish white DUP210010796 ELASTOMER CHEMICALS DEPARTMENT SYNTHETIC RUBBERS powder; water stable. Us e: A bonding agent and adhesive assistant for adhering "Dacron" polyester fiber to rubber compositions in water emulsion or latex systems. Co n t a in e r s : 125-lb. drums. "Hylene" T Organic Isocyanate: Toluene-2,4-diiso cyanate--CH3C6H3(NCO)2. Water white to pale yellow liquid; Sp. Gr. 1.22. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t a in er s : 45ana 500-ib. arums, tank trailers and tank cars. "Hylene" TIVI Organic Isocyanate: 80% toluene-2, 4-diisocyanate (See "Hylene" T) and 20% toluene-2, 6-diisocyanate--CH3C6H3(NCO)2. Sp. Gr. 1.22; water white to pale yellow liquid. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t a in e r s : 45- and 500-lb. drums, tank trailers and tank cars. "Hylene" TIVI -65 Organic Isocyanate: 65% toluene 2,4-diisocyanate, and 35% toluene 2,6-diisocyanate (See "Hylene" TM). Sp. Gr. 1.22. Water white to pale yellow liquid. Us e: In manufacture of urethane foam, finishes, adhesives andrubbers. Co n t a in e r s : 45- and 500-lb. drums, tank trailers and tank cars, E. Special Purpose Chemicals. Copper Inhibitor 50 ELA Heliozone Moca NBC Polyac Retarder W Copper Inhibitor 50: 50% disalicylalpropylenediamine --HOC6H4CHNCHaCH(CH3)NCHC6H4OH, and 50% aromatic solvent. Amber colored liquid; Sp. Gr. 0.99. Us e: To prevent catalytic action of copper on oxidation of qatural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. ELA--Elastomer Lubricating Agent; Mixture of phos phate esters. Light amber liquid; Sp. Gr. 0.99. Us e: A lubricant for unvulcanized natural and synthetic rubber compositions. Co n t a in er s : 425-lb. drums. " Hel i ozone" I n h i bitor: Blend of selected waxy materials. Pale yellow to buff color, waxy flakes; Sp. Gr. 0.90. Us e: To retard sun checking and cracking of natural and synthetic rubbers. Co n t ain e r s ; 50-lb. boxes. "Moca" Curing Agent for Urethane Synthetic Rub bers: Methylene-bis-orthochloroaniline. Tan colored, coarsely ground lumps; Sp. Gr. 1.39. Us e: Curing agent for "Adiprene" L urethane rubber, other urethane rubbers, and epoxy resins. Co n t a in e r s : 50-lb. drums. NBC Sun or Ozone Cracking Inhibitor: Nickel dibutyldithiocarbamate--[(C4H9)aNC(S)S]2Ni). Dark green flakes; Sp. Gr. 1.26; M. P. not lower than 86C. Us e: To prevent cracking due to ozone of SBR (styrene butadiene rubber) stocks. Will improve heat resistance and retard discoloration of neoprene compounds. Co n t a in e r s : 250-lb. drums. "Polyac" Butyl Rubber Conditioner: 25% poly-paradinitrosobenzene--[CeH4(NO)2]x--with an inert wax. Dark brown waxy pellets; Sp. Gr. 0.96. Us e: A processing aid and accelerator of vulcanization for butyl rubber. Co n t a in e r s : 100-lb. drums. Retarder W: Salicylic acid--HOC6H4COOH--with a dispersing agent. Buff colored, non-dusty powder; Sp. Gr. 1.43. Us e : To prevent premature curing of natural and synthetic rubbers; to activate blowing agents. Co n t a in e r s : 300-lb. drums. COLORS FOR RUBBER Rubber Dispersed Colors: Us e: For coloring natural and synthetic rubber compounds. Co n t ain e r s : 50-lb. boxes. r9vInHiiIrni irbTl<i%v iDwiiwDwDCkaBwC "Adiprene" C Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Amber colored solid in stick form; Sp. Gr. 1.07. Us e: A synthetic rubber for products that must have exceptional abrasion resistance, high tensile strength and low temperature brittle point. Co n t a in e r s : 50-lb. drums. "Adiprene" L-100 Liquid Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Honey colored liquid; viscosity 14,000 to 19,000 cps at 30C.; Sp. Gr. 1.06. Us e: A fluid elastomer which can be converted into a tough elastic solid rubber having excellent resistance to abrasion, oxidation and ozone. Co n t a in e r s : 450-lb. drums. "Adiprene" L-167 Liquid Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Honey colored liquid; viscosity 6,000-8,000 cps at 30C. Sp. Gr. 1.06. Us e: A type of "Adiprene" L-100 which will give harder vulcanizates. Has excellent resistance to abra sion, oxidation and ozone. Co n t a in er s : 450-lb. drums. "Hypalon" 20 Synthetic Rubber--Chlcrosulfonated Polyethylene: White chips; Sp. Gr. 1.10. Us e: An elasto mer for products which are oil resistant, unattacked by ozone, have excellent color stability and resistance to heat, weather and chemicals. Co n t ain er s : 50-lb. bags or boxes. "Hypalon" 30 Synthetic Rubber--Chlorosulfonated Polyethylene: White chips; Sp. Gr. 1.28. Us e: A solution type material for protective and decorative coatings, a paint base. Coatings are resistant to weathering, ozone, many oils and chemicals. Co n t a in e r s : 50-lb. boxes. "Hypalon" 40--Synthetic Rubber--Chlorosulfonated Polyethylene: White chips; Sp. Gr. 1.18. Us e: An im proved elastomer designed for ease in processing. Has excellent oil and heat resistance combined with exceptional color stability and weatherability. Co n t ain er s : 50-lb. bags. Neoprene Latices: Water emulsions of polymerized 2-chlorobutadiene 1,3. White, milky liquid. Us e: For making dipped, impregnated and extruded products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t ain e r s : 55-gal. drums, 3500-gal. tank trucks, 8000-gal. tank cars. Type 60--59% solids; Sp. Gr. 1.12. A concentrated latex; chiefly for foamed products. Type 400--50% solids; Sp. Gr. 1.15. General purpose where high modulus, good heat resistance, improved tear strength and exceptional ozone resistance are needed. Type 571--50% solids; Sp. Gr. 1.10. General purpose use. Type 572--50% solids; Sp. Gr. 1.11. Special for adhesives; high wet strength. Type 601-A--59% solids; Sp. Gr. 1.12. A concentrated latex; general purpose use. DUP210010797 ELASTOMER CHEMICALS DEPARTMENT SYNTHETIC RUBBERS Type 635 -- 58% solids; Sp. Gr. 1.12. A concentrated latex. Used in blends with other neoprenes to improve wet gel strength of films. Also for paper pulp additive. Type 650--60% solids; Sp. Gr. 1.11. A concentrated form of Type 750. General purpose use where high solids are desired, particularly in dipped goods. Type 735--37.5% solids; Sp. Gr. 1.08. Used in blends with other neoprenes to improve wet gel strength of films. Also for paper pulp addition. Type 736--34.5% solids; Sp. Gr. 1.06. Especially stabilized for paper pulp addition. Type 750--50% solids; Sp. Gr. 1.10. General purpose use, particularly in dipped goods where low modulus and ex cellent crystallization resistance is required. Type 842-A--50% solids; Sp. Gr. 1.10. Products made from this type do not stiffen at low temperatures. Type 950--50% solids; Sp. Gr. 1.10. A cationic latex; for treatment of fibrous materials. Neoprene Type AC: Polymer of 2-chlorobutadiene 1,3. Creamy white chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength adhesive cements. Co n t a in er s ; 50-lb. bags. Neoprene Type AD: Polymer of 2-chlorobutadiene 1,3. Creamy white chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength, solvent type adhesive cements. Greater viscosity and color stability than Type AC. Co n t a in e r s : 50-lb. bags. Neoprene Type CG: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength adhesive cements. Co n t a in e r s : 50-lb. bags. Neoprene Type FB: Polymer of 2-chlorobutadiene 1,3. Dark brown putty-like solid of very low molecular weight; Sp. Gr. 1.23. Us e: A vulcanizable plasticizer for neoprene and other synthetic elastomers; in cement applications which require a high solids-to-viscosity ratio; useful in preparation of caulks and sealants. Co n t ain e r s : 100-lb. fiber drums. " Neoprene Type GN: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: General purpose for products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in e r s ; 50-lb. bags. Neoprene Type GN-A: Polymer of 2-chlorobutadiene 1,3 containing a discoloring antioxidant. Amber chips; Sp. Gr. 1.23. Us e: General purpose for products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t ain e r s : 50-lb. bags. Neoprene Type GRT: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: For general purpose stocks requiring retention of building tack and flexibility of uncured stocks. Vulcanizates have superior resistance to hardening due to elastomer crystallization. Co n t ain e r s : 50-lb. bags. Neoprene Type KNR: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e : Chiefly in paints and putties, for lining tanks and chemical equipment. CON TAINERS: 50-lb. bags. Neoprene Type S: Polymer of 2-chlorobutadiene 1,3 containing a nondiscoloring antioxidant. Amber chips; Sp. Gr. 1.20. Us e: Chiefly in crepe soles that resist softening and are resistant to oil and gasoline; as a stiffener for other neoprenes. Co n t ain e r s : 50-lb. bags. Neoprene Type W: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: Gsnsrsl purpose neoprene iisving rnucli greater storage stability, better processing characteristics and better color retention during cure than the "G" type neoprene. Does not contain sulfur or thiuram stabilizers. Co n t a in e r s : 50-lb. bags. Neoprene Type WB: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: For extruded goods where ultimate in surface appearance is required; highly desirable for calendered items which must be very smooth and resist shrinkage; similar to Type WX in crystallization resistance. Co n t a in er s : 50-lb. bags. Neoprene Type WD: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: A high viscosity neoprene to be used in compounds designed for maximum crystallization resistance and low tempera ture flexibility. Co n t a in e r s : 50-lb. bags. Neoprene Type WHV: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.23. Us e: A Type W neoprene of high viscosity for use in compounds containing large amounts of fillers and oils. Can be used as a stiffener for other neoprenes. Co n t a in er s : 50-lb. bags. Neoprene Type WRT: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.25. Us e: General purpose neoprene having superior resistance to hardening due to elastomer crystallization. Has excellent storage stability, processing properties and wide latitude in compounding. Co n t a in e r s : 50-lb. bags. Neoprene Type WX: Polymer of 2-chlorobutadiene 1,3. Light amber to creamy white chips; Sp. Gr. 1.24. Us e: General purpose neoprene having better resistance to stiffening due to crystallization than Type W. Has ex cellent storage stability, processing properties and wide latitude in compounding. Co n t ain er s : 50-lb. bags. "Viton" A Fluorcelastomer: White translucent solid; Sp. Gr. 1.82. Us e : For rubber products that must with stand unusually high temperatures up to 600F. in air, chemicals or most liquids. Co n t ain er s : 50-lb. drums. "Viton" A-HV Fluoroelastomer: White translucent solid; Sp. Gr. 1.82. UsE: A type of "Viton" A with high viscosity for rubber products that must withstand un usually high temperatures up to 600F. in air, chemicals or most liquids. Co n t ain e r s : 50-lb. drums. "Viton" B Fluoroelastomer: White translucent solid. Sp. Gr. 1.86. Us e: A type of "Viton" which has superior heat and chemical resistance. Used for rubber products that must withstand unusually high temperatures up to 600F. in air, chemicals or most liquids. Co n t ain er s : 50-lb. drums. DUP210010798 ELECTROCHEMiCALS DEPARTMENT GENERAL OFFICE: DuPont Building Wilmington 98, Delaware DISTRICT OFFICES: Boston (Waltham 54), Massachusetts Charlotte 1, North Carolina Chicago 46, Illinois Cincinnati 2, Ohio Cleveland 20, Ohio Dallas 21, Texas Detroit 35, Michigan Los Angeles, California New York 1, New York Philadelphia (Wynnewood), Pennsylvania San Francisco 24, California 45 Fourth Avenue 427 West Fourth Street 7250 North Cicero Avenue, Lincolnwood 2412 Carew Tower 11900 Shaker Boulevard 8510 Ambassador Row 13000 West Seven Mile Road P.O. Box 70, El Monte, California 350 Fifth Avenue 308 East Lancaster Avenue 1485 Bayshore Boulevard PLANTS: Memphis, Tennessee Niagara Falls, New York Perth Amboy, New Jersey EXPORT DIVISION: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 TWinbrook 9-8300 FRanklin 5-5561 TT'JH3-7250 PArkway 1-5253 LOngacre 1-1580 FLeetwood 7-4611 UNiversity 4-1963 Cumberland 3-2761 LOngacre 3-6440 TRinity 8-2700 JUniper 6-5141 PRospect 4-5354 PRODUCTS ACRYLIC PRODUCTS "Lucite" Acrylic Resin (Methacrylate Polymers)-- [CH2C(CH3)COOR]x: A series of polymeric esters of methacrylic acid, in which R is methyl--("Lucite" 41 acrylic resin), ethyl--("Lucite" 42), n-butyl--("Lucite" 44), isobutyl--("Lucite" 45), or 50/50 n-butyl/isobutyl-- ("Lucite" 46). Water-white, transparent, thermoplastic resins in granular form. Densities from 1.19 to 1.05; soluble in a wide variety of polar and nonpolar solvents; compatible with many plasticizers. Excellent outdoor durability; chem ically stable at elevated temperatures; resistant to water, aqueous salt solutions and moderately concentrated acids and alkalies. Us e : Ingredients in lacquers and other finishes; aerosol "snow"; coatings for fabrics and hot melt adhesive compositions; impregnants for leather; modifiers for other resins, such as vinyls. Co n t ain er s : 25- to 250-lb. fiber drums. Methacrylate Monomers--CH2C(CH3)COOR (Where R is Hydrogen, Methyl, Normal Butyl or Isobutyl): Water-white, mobile, volatile liquids containing a small amount of polymerization inhibitor. Us e: Primarily in manufacture of acrylic polymers for paints and coatings, and as chemical intermediates. Co n t a in e r s : 5-gal. cans, 55-gal. drums, tank trucks, 8,000-gal. tank cars. Methacrylate Polymers: [See "Lucite" Acrylic Resin (Methacrylate Polymers) above]. CERAMIC PRODUCTS CERAMIC COLORS Glass Enamels: A series of finely ground fluxes, basically lead borosilicate, intimately blended with colored ceramic pigments. Full range of colors available in paste (mixture of enamel with air drying or thermofluid squeegee medium) or dry form. Different grades give characteristics of acid resistance, alkali resistance, sulfide resistance, or low lead release to meet requirements for various uses. Firing range 1000-1400F. (537.8-760C.). Us e: For fired-on labels and decorations on glassware, tumblers, milk bottles, beverage bottles, glass containers, illuminating ware, archi tectural glass, and signs. Co n t ain er s : Dry colors, 25-, 50-| 100-, and 200-lb. fiber drums; paste colors, 100-lb. (5-gal.) steel pails; thermofluid enamels, 200-lb. (20-gal.) steel drums, 50-lb. (5-gal.) steel pails. Gold Colors: Finely ground mixtures of low-melting glasses and gold-base pigments suitable for use over all standard glazes and in porcelain enamels. Firing range 1300-1500F. (704.4-815.6C.); Cones 018-014. Us e: Same as Overglaze Colors, below. Co n t a in e r s : Under 25 lb., cans; 25 lb. or more, 25-lb. (3-gal.) drums. Overglaze Colors: Finely ground mixtures of pigments ar.d low-melting glasses suitable for use over standard glazes. Temperature range 1300-1500F. (704.4815.6C.); Cones 018-014. Us e: For bands, decalcomania, and similar decorative designs fired on china, pottery, terra cotta, tile, and other glazed ceramic surfaces. Co n t a in e r s : 25-, 100-, and 200-lb. drums. ELECTRONIC MATERIALS Conductive Silver Preparations: Specially compounded materials containing silver powder in a suitable vehicle, with or without ceramic flux; can be coated on base ma terials such as titanate bodies, mica, glass, porcelain, steatite, plastics, wood, cloth, and paper by stencil screen ing (squeegee), spraying, dipping, brushing, roller coating, banding wheel, or other suitable method. Types for air drying, baking at low temperatures, and firing at elevated temperatures. Us e: To produce capacitor electrodes, ce ramic to metal solder seals, electrical shields, surfaces of high conductivity on nonconductive materials; as a base for electroplating on ceramic and nonceramic surfaces. Co n t ain e r s : Paste, qt. and gal. cans; liquid, pt. and gal. bottles. DUP210010799 ELECTROCHEMICALS DEPARTMENT CERAMIC PRODUCTS Golds: Special preparations for applications where re sistance to strong acids and migration is required. Us e: For application on semiconductors (transistors, diodes, etc.), special capacitors, and printed circuits. Co n t ain er s : 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. Palladiums and Platinums: Special preparations for application on green ceramic bases that are fired at ex treme temperatures and allow multiple laminations of cicC l FGl ic u . CeramiC Slicel S. c j 5c, i i' i capei'-iiAJi a. TAINERS: 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. - Resistor Compositions: Specially treated semiconduct ing metal powders compounded with glass binders and temporary organic carriers. Can be applied to glass or ceramic surfaces by stencil screening (squeegee), spraying, brushing, or dipping. Firing range 1300-1400F. (700760C.). Resistance of 500 to 10,000 ohms/square obtained with 1-mil film. Fired resistors have good reproducibility, low temperature and voltage coefficients, and stability to abrasion, moisture, and relatively high (257F., 125C.) ambient temperature. Us e: To produce fired-on resistor components for electronic circuits. CONTAINERS: 1-, 3-, 8-, T6-, 24-, and 32-oz. jars. PIGMENTS Body Stains: Finely ground calcined oxide pigments for coloring ceramic bodies. Us e: As colors or designs for tile, terra cotta, chinaware, etc., where the pigment becomes part of the ceramic body. Co n t a in er s : 25-, 50-, 100-, and 200-lb. fiber drums. Enamel Pigments: Finely ground calcined oxide mix tures. Maximum firing temperature 1600F. (871.1C.). Us e: For coloring vitreous enamels for application on sheet steel, cast iron, or aluminum. Co n t a in er s : 25-, 50-, 100-, and 200-lb. drums. Glaze Stains: Finely ground calcined oxides for use in coloring ceramic glazes. Us e: Coloring glaze coatings for pottery, tile, terra cotta, and similar ceramieware. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Special Pigments for Plastics, Paper and Textiles: Finely ground calcined oxides having good color stability; to light and temperature. Us e: For coloring nylon, paper, plastics, and textiles, where special stability is desirable. Available also as wet milled slurries. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. drums. Silver Powder--Ag: Finely divided silver powder, 99+% silver; with or without added flux. Us e: Preparation of Conductive Coating Materials (above). Co n t a in e r s : 5-o z. bottles; qt. and gal. cans. FLUXES (FRITS) Fluxes: Low-melting glasses. Firing temperatures 9501300F. (510-704.4C.). Us e: To lower fusing tempera tures of refractory materials. Co n t ain er s : 25-, 50-, 100-, and 200-lb. drums. Porcelain for Aluminum: Vitreous frits which fire at 970-1000F. (521.1-537.8C.) for use on aluminum and its alloys. Enamels have relative resistance to impact, chemical attack, thermal shock, and salt water corrosion. Us e: For imparting chemical resistance, dielectric strength, and color to aluminum and its alloys. CONTAINERS: 25-, 50-, 100-, and 200-lb. fiber drums. LUSTERS Luster Colors: Liquids .containing resinates or similar organic compounds of various base or precious metals. Us e: For decorating pottery, glass, tile, china, terra cotta, and similar ceramic surfaces with fired-on iridescent coat ings. Co n t a in e r s : Precious metal lusters, 500-g. (1-lb.) bottles; base metal lusters, gal. (7-lb.) bottles. MEDIUMS AND THINNERS Squeegee Mediums (Squeegee Oils): Specially com pounded organic vehicles for paste colors applied by stencil screen. Us e: As vehicles for paste colors for stencil appli cation on glassware, tumblers, bottles, porcelain enamel, pottery, etc. Co n t ain e r s : 55-gal. drums. Th inners: Essential oils and mixtures thereof for use with precious metal preparations. Us e: Thinning and ex tending precious metal preparations used in decorating ceramieware. Co n t ain er s : Lb. bottles. Underglaze Pigments: Finely ground calcined oxides for colored designs beneath the glaze on ceramic surfaces. Us e: For coloring or decorating pottery, tile, terra cotta, and similar unglazed ceramic surfaces. Co n t a in er s : 25-, 50-, 100-, and 200-lb. fiber drums. PRECIOUS METAL COMPOSITIONS (DECORATIVE) Brown Gold (Gold Powders)--Au: Finely divided, dry preparations containing gold and usually a flux. For dry application by dusting on a tacky surface to produce heavy gold deposits which have good stability and longwearing qualities. Us e: Decorating china, pottery, tile, etc., with fiied-on gold designs; for increasing gold content of other gold preparations. Co n t a in er s : 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. Burnish Golds: Finely divided gold powder combined with suitable fluxes and incorporated into low viscosity vehicles for brush application. Produce heavy, stable, long-wearing gold deposits. Fire to a matt surface; the true gold surface texture developed by burnishing. Platinum burnishes for white ware are also available. Us e: Decorating high grade china and ceramieware with fired-on gold designs. Co n t a in er s : 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. Liquid Bright Golds: Liquid compositions suitable for application by brushing, stamping, spraying, or stenciling (squeegee). Fire to a bright mirror surface. Us e : Decorating pottery, glass, tile, terra cotta, enameled metals, etc., with fired-on, bright gold designs. Co n t ain er s : 100- and 500-g. bottles. Liquid Bright Palladiums or Platinums: Liquid com positions suitable for application by brushing, stamping, spraying, or stenciling (squeegee). Fire to a silvery mirror surface. Us e : Decorating pottery, glass, tile, terra cotta, enameled metals, etc., with fired-on, bright silvery designs. Co n t ain e r s : 100- and 500-g. bottles. DUP210010800 ELECTROCHEMICALS DEPARTMENT CHLORINE PRODUCTS Paste Golds: Heavy compositions of powdered gold and flux suitable for printing by tissue transfer method or can be diluted for brush application. Fire to matt surface which is burnished to develop true gold texture. Us e: Decorating high grade chinaware and other ceramic surfaces with gold designs; for decorating ceramicware with encrusted or Roman gold designs. Co n t a in e r s ; 1-, 3-, 8-, 16-, 24-, and 32-oz. jars. CHLORINE PRODUCTS "Artie" Methyl Chloride: (See Methyl Chloride, below.) Chloroform (Trichloromethane)--CHCI3; A colorless, sweet smelling liquid; soluble in alcohol and ether; slightly soluble in water. Available in two grades. CONTAINERS: 55-gal. drums (660-lb.); tank cars. Hy d r o c a r b o n St a bil iz e d Gr a d e : Boiling range 140.7142.5F. (60.4-61.4C). Weight per gal., 12.43 lb. at 20C. Us e: As a solvent for fats, oils, and other organic compounds; for spotting textiles; as a freezing-point depressant for fire-extinguisher fluids; in the manu facture of dyes and chemicals, e.g., difluorochloromethane. Et h an o l St a bil iz e d Gr a d e: Boiling range, 20th drop 139.1F. (S9.5C.) min.; 95% 142.7F. (61.5C.). Weight per gal., 12.375 lb. at 20C. Us e: As a solvent for fats, oils, and other organic compounds; in the manufacture of chemicals, dyes, and pharmaceuticals. Methyl Chloride (Chloromethane, Monochloromethane)--CH3CI: At ordinary temperatures a colorless gas with ethereal odor; slightly soluble in water; soluble in most organic solvents; stable; moderately flammable; high latent heat and other physical properties desirable in re frigerants. Available in Refrigeration Grade and Technical Grade. Boiling range (95%) --12.3 to --10.5F. (--24.6 to --23.6C.). Weight per gal. 7.68 lb. at 20C. Re f r ig e r a t io n Gr a d e ("Ar t ic " Me t h y l Ch l o r id e ); Us e : As a refrigerant; as a fluid for thermometric and thermostatic equipment. CONTAINERS: 100-lb. cylinders; multiunit tank cars of 15 (1,300 lb. each) tanks. Te c h n ic al Gr a d e: Us e : As a methylating agent in organic synthesis; as a low temperature solvent; as a solvent and propellent in aerosols. Co n t a in e r s : 100-lb. cylinders; multiunit tank cars of 15 (1,300 lb. each) tanks; single unit tank cars. Methylene Chloride (Dichloromethane, Methylene Dichloride)--CH2CI2: A colorless liquid with faintly ethereal odor; practically nonflammable and nonexplo sive. Available in Refrigeration Grade for both solvent and refrigerant uses. Boiling range 103.1-104.5F. (39.540.3C.). Weight per gal. 11.07 lb. at 20C. Us e: As a refrigerant in centrifugal compressors; for chemical syn thesis; as a low temperature heat transfer liquid; as a paint remover; as a cold cleaner; as a solvent for animal and vegetable oil extraction; as a solvent in aerosols; for de waxing of lubricating oils; and as a solvent for cellulose acetates. Co n t ain e r s : 55-gal. drums (600-lb.); tank trucks; tank cars. 8 Perchlorethylene (T etrachloroethylene)--C2C!4: Clear, colorless liquid with ethereal odor; practically in soluble in water; soluble in alcohol and ether; nonflam mable and nonexplosive; stable in the presence of moisture. Available in Dry Cleaning Grade and Technical Grade. Boiling range 248.9-251.6F. (120.5-122.0C.). Weight per gal. 13.55 lb. at 20C. Us e: Spotting and dry cleaning fluid; textile cleaning; vapor degreasing solvent; cold cleaner; drying agent for metals and other solids; vermi fuge; as a solvent for rubber, waxes, tar, paraffin, and gums; as a heat transfer medium; for chemical synthesis. Co n t a in e r s : 55-gal. drums (700-lb.); tank trucks; tank cars. "Perclene" Perchlorethylene: (See Perchlorethylene, above.) Tetrachloroethane (1,1,2,2-Tetrachloroethane, Acet ylene Tetrachloride)--C2H2CI4: A clear, very slightly yellowish, heavy liquid; soluble in alcohol and ether; non flammable and nonexplosive; unstable in the presence of moisture; vapors toxic. B. P. approximately 295.3F. (146.3C.). Weight per gal. 13.32 lb. at 20C. Us e: As a solvent in special preparations; in chemical synthesis. Co n t ain er s : 55-gal. drums (700-lb.). Trichlorethylene --C2HCI3: Clear, colorless liquid with ethereal odor; miscible with alcohol, ether, and most organic solvents; practically insoluble in water; stable in the presence of moisture; practically nonflammable and nonexplosive. Available in four grades. Co n t a in e r s : 55-gal. drums (660-lb.); tank trucks; tank cars. Te c h n ic a l a n d Dr y Cl e a n in g Gr a d e ("Tr ic l e n e " Tr ic h l o r e t h y l e n e): Boiling range 187.9-190.4 F. (86.6-88.0C.). Weight per gal. 12.19 lb. at 20C. Us e: Dry cleaning and spotting fluid; textile cleaning; solvent for adhesives and waxes; asphaltic paint remover; for coating paper; organic reagent. Me t a l De g r e a s in g Gr a d e ("Tr ic l e n e " D Tr ic h l o r e t h y l en e): Boiling range 187.5-190.2F. (86.4-87.9 C.). Weight per gal. 12.16 lb. at 20C. Us e: Specifically stabilized for vapor degreasing of metals; low temperature heat transfer liquid. Pa in t Gr a d e ("Tr ic l e n e " Pa in t Gr a d e Tr ic h l o r e t h y l en e ): Boiling range 185.7-190.2F. (85.4-87.9C.). Weight per gal. 12.14 lb. at 20C. Us e: As a thinner for paints based on several types of alkyd resins; on as phaltic materials, including "Gilsonite"; and on some specialty resins, such as certain acrylics, epoxy esters, chlorinated rubbers, ethyl cellulose, etc. Ex t r a c t io n Gr a d e : Boiling range 187.7-189.5F. (86.5-87.5C.). Weight per gal. 12.23 lb. at 20C. Us e: Extraction solvent for many waxes, resins, and alkaloids. Fr e ez in g -p o in t De p r es s a n t Gr a d e: Weight per gal. 12.21 lb. at 20C. Us e: Freezing-point depressant for fire extinguisher fluids. "Triclene" Trichlorethylene: (See Trichlorethylene.) ELECTROPLATING PRODUCTS Addition Agent 774: Pale amber, slightly viscous water solution of organic wetting agents; faint amine odor; mildly alkaline. Us e: As antipitting agent with "Coppralyte" plating salts; as antifume agent with "Durobrite" zinc plating. Co n t a in e r s : 9-lb. bottles (1-gal.), 125-lb. fiber drums. DUP210010801 ELECTROCHEMiCALS DEPARTMENT ELECTROPLATING PRODUCTS "Cadalyte" Bright Dip: Clear colorless liquid; corrosive; miscible with water. Diluted with 15-30 parts of water for dipping solution. Us e; To brighten cadmium deposits by "bright dipping;" to add a tarnish-resistant film on surface of cadmium plate. Co n t ain er s : 5-lb. bottles, 120-lb. car boys. "Cadalyte" Brightener: Light brown, fine powder. USE: In cyanide cadmium plating baths for maintaining high covering power of bath and brilliancy and uniformity of deposits. Co n t ain er s : 5-, 25-, and 50-lb. pails and containers. "Cadalyte" Maintenance Compound: Buff colored, free flowing, fine powder; water soluble. Contains "Cadalyte" Brightener and sodium cyanide in proportions consumed in cadmium plating. Us e: Replenishing "Cadalyte" cad mium plating baths. Co n t a in er s : 100-lb. steel or fiber drums. "Cadalyte" Plating Salts: Reddish-brown powder con sisting of a mixture of sodium cyanide, cadmium oxide, and brighteners; contains approximately 19.2% cadmium. Free flowing, water soluble, stable. Us e: To prepare a cadmium plating bath which deposits cadmium in a bright, ductile, adherent form on iron and steel to prevent rusting and corrosion. Co n t a in er s : 50-lb. steel or fiber drums. Carbonate Remover: Fine, white, free flowing powder. Slightly soluble in water. Us e : To remove carbonates from cyanide plating solutions. Co n t a in e r s : 100-lb. bags. Copper Cyanide (Cuprous Cyanide)--Cu2(CN)2: A creamy white powder; insoluble in water; soluble in sodium cyanide and potassium cyanide solutions; copper content min. 70%; cyanogen content min. 28.5%. Us e: In copper and brass cyanide electroplating solutions. Co n t ain e r s : 100-lb. packages. Copper Plating Addition Agents: (See Addition Agent 774, "Coppralyte" Addition Agent 1085, "Dacolyte" Addition Agent, and Elchem 1393 and Elchem 1396 Addition Agents.) "Coppralyte" Addition Agent 1085: Pale amber, slightly viscous water solution of organic wetting agents; faint amine odor; mildly alkaline. Us e: As antipitting agent for "Coppralyte" copper plating. Co n t a in e r s : 9-lb. bottles (1-gal.), 125-lb. fiber drums. "Coppralyte" Plating Salt--Potassium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 25.4%; free KCN min. 1.25%, max. 3.0%. Us e: For preparing copper plating baths for pro ducing smooth, bright, heavy, adherent coatings of copper on steel die castings, wire, and other parts. Co n t ain e r s : 100-lb. packages. "Coppralyte" Plating Salt--Sodium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 27.0%; free NaCN min. 0.4%, max. 2.0%. Us e: For preparing copper plating baths for produc ing smooth, bright, heavy, adherent coatings of copper on steel die castings, wire, and other parts. Co n t a in e r s : 100-lb. packages. "Dacolyte" Addition Agent: Dark brown, amorphous, fine powder; sharp odor; water soluble. Us e: In acid copper plating solutions for heavy deposits only. Assists in pro ducing smooth copper deposits free from nodules or trees Co n t a in e r s : 5-, 10-, 25-, and 50-lb. fiber containers. "Durobrite" Addition Agent 26: Amber liquid. Us e: As a brightening agent in cyanide zinc barrel plating baths. Co n t a in e r s : 40-lb. pails. "Durobrite" Addition Agent 309: Clear amber liquid containing approximately 10% solids. Us e: Brightening agent for cyanide zinc plating. Improves covering power by extending the bright plating range to low current density areas. Co n t a in e r s :-40-lb. steel pails. Elchem 1393 Addition Agent: Grayish-white powder containing potassium cyanide and selenium; slightly hygro scopic, water soluble, stable. Us e : As a brightening agent in cyanide copper plating baths. Co n t ain e r s ; 25- and 100-lb. fiber containers. Elchem 1396 Addition Agent: Dark amber liquid; mildly alkaline. Us e: As a brightener and antipitting agent in cyanide copper plating baths. Co n t a in e r s : 40-lb. pails; 125-lb. packages. Elchem 1442 Addition Agent: Mildly alkaline solution containing potassium cyanide and selenium. Us e: As a brightening agent and leveling agent in cyanide copper plating baths. Co n t ain e r s : 40-lb. pails; 450-lb. drums. Electropolishing Solution: A clear, dark amber, cor rosive liquid; glycolic acid-sulfuric acid formulation; acid content 85%; F. P. below 32F. (0C.); nonflammable and nonexplosive; miscible with water. Us e: In electropolishing stainless steel over a wide current density range. Co n t a in e r s : 162-lb. carboys. Halogen Tin Addition Agent 2 Special: Clear colorless liquid; miscible with water; stable. Us e: In Halogen Tin Plating Process for brightening and controlling deposit. Co n t ain e r s : 420-lb. lined drums. Halogen Tin Plating Process: An acid tin plating process, using bivalent tin salts and tin anodes. Us e: For continuous tin plating on steel strip, and copper or steel wire. Bath permits high current densities and rapid plating. Polysulfide: A sodium sulfuret similar to Liver of Sulfur, having a sodium base instead of a potassium base. Yellow to yellow-green powder; sodium polysulfide content min. 56%; total sulfur min. 50.7%. Us e: For coloring copper and brass; for stripping copper plated deposits; for purify ing cyanide plating solutions. Co n t a in e r s : 60-lb. cases (six 10-lb. tins), 100-lb. drums. Potassium-Copper Cyanide Double Salt: White crys talline complex salt of copper cyanide and potassium cya nide. Us e: For preparing and maintaining cyanide copper plating baths based on potassium cyanide. Co n t a in er s : 100-lb. drums. Potassium Cyanide: (See Page 12.) DUP210010802 ELECTROCHEMICALS DEPARTMENT FURAN PRODUCTS AND PEROXYGEN PRODUCTS Sodium-Copper Cyanide Double Salt: White crystalline complex salt of copper cyanide and sodium cyanide. Us e: For preparing and maintaining cyanide copper plating baths based on sodium cyanide. CONTAINERS: 100-lb. fiber drums. Sodium Cyanide: (See Page 12.) Sodium Sulfocvanide: (See Page 12.) Zinc Cyanide--Zn(CN)2: Stable white powder; soluble in alkalies, sodium and potassium cyanide solutions, and in dilute mineral acids with production of hydrogen cyan ide. Insoluble in water and alcohol; decomposes on heating. Zinc content min. 55%; cyanogen content min. 40%. Us e: In zinc and brass electroplating solutions; as a chemi cal reagent. Co n t a in e r s : 100-lb. packages. Zinc Plating Addition Agents: See "Durobrite" Addi tion Agent 26, "Durobrite" Addition Agent 309, "Zin-OLyte" Addition Agent O, and "Zin-O-Lyte" Brighteners. "Zin-O-Lyte" Addition Agent O: A heavy gray powder containing molybdenum; soluble in caustic soda solution; insoluble in water. Us e: In make up and maintenance of bright zinc plating baths prepared with "Zin-O-Lyte" salts. Co n t ain e r s : 5-, 25-, and 50-lb. fiber containers. "Zin-O-Lyte" Brighteners: Organic addition agents; fine powder; water soluble. Us e: In cyanide zinc plating baths to increase deposit brightness and current efficiencies of the bath and widen the bright current density range. Co n t ain er s : 50- and 100-lb. packages. "Zin-O-Lyte" Salts: Fine white powder containing sodium cyanide and other chemicals in proportions re quired for the "Zin-O-Lyte" zinc plating bath. Us e: In preparing "Zin-O-Lyte" zinc plating baths for still or barrel operation. Co n t a in e r s : 100-lb. steel or fiber drums. "Zin-O-Lyte" Special Zinc Barrel Brightener: Organic addition agent; fine powder; water-soluble. Us e: In cyanide zinc barrel plating solutions to increase deposit brightness and current efficiencies. Co n t ain er s : 50- and 100-lb. containers. FURAN PRODUCTS l,4-Dichlorobutane(Tetramethyiene Chloride, DCB) --CI(CH2)4CI : A colorless liquid with mild, pleasant odor; miscible with most organic solvents; practically insoluble in water. Boiling range 307.4-312.8F. (153-156C.); F.P. --35.1F. (--37.3C.); flash point (TAG Closed Cup) 104F. (40C.); Sp. Gr. 1.135-1.141; weight per gal. 9.46 lb. Us e: Reactive chlorine atoms permit its use in organic syntheses. Co n t a in e r s : 9-lb. (1-gal.) containers; 45- and 500-lb. drums; tank cars. Furan (Furfurane)--(CH)40: A highly volatile, colorless liquid, miscible with most organic solvents; slightly soluble in water. Boiling range 80.6-89.6F. (27-32C.); F. P. --122.2F. (--85.68C.); flash point (TAG Closed Cup) --32F. (--35.6C.); Sp. Gr. 0.935-0.938; weight per gal. 10 7.8 lb.; stabilized with 0.05% hydroquinone. Us e: Furan is highly reactive by either substitution or addition. Lends itself to pharmaceutical and industrial syntheses. Co n t a in er s : 7-lb. (1-gal.) containers; 35- and 400-lb. drums; tank cars. Tetrahydrofuran (Tetramethylene Oxide, THF)-- (c h 2)4o : A clear, colorless liquid with ether-like odor; readily miscible with organic solvents and water. Boil ing range 149-152.6F. (65-67C.); F. P. --163.3% (--108.52C.); flash point (TAG Closed Cup) 6F. (--14.5 C.); Sp. Gr. 0.885-0.888; weight per gal. 7.4 lb.; stabilized with 0.025% BHA (butylated hydroxyanisole); other stabilizers available. Us e: Excellent solvent for high molecular weight polyvinyl chloride resins and vinylidene chloride copolymers for coatings, films, adhesives, printing inks, etc.; unique reaction solvent for carrying out Grignard, sodium acetylide, and reduction reactions, including hydro genations; component in paint remover and cold cleaner formulations; chemical synthesis; and extraction processes. CONTAINERS: 7-lb. (1-gal.) containers; 35- and 400-lb. drums; tank trucks; tank cars. PEROXYGEN PRODUCTS "Albone" Hydrogen Peroxide: (See Hydrogen Peroxide, below.) Calcium Peroxide--Ca02: Cream colored powder con taining Ca02 and CaO; Ca02 content min. 75%; active oxygen content min. 16.65% by weight. Liberates oxygen slowly in water suspensions; decomposed by heat; insoluble in alcohol, ether, and ammonia; soluble in weak acid3 or ammonium salt solutions. Us e: In manufacture of pharma ceutical and cosmetic preparations; general oxidation appli cations. Co n t a in e r s : 25- and 100-lb. fiber drums. Hydrogen Peroxide--H202: Colorless, clear liquid; slightly sharp odor; miscible in all properties with water; liberates oxygen when decomposed. "Al b o n e " 35 Hy d r o g e n Pe r o x id e : H202 content 35% by weight; active oxygen 16.5% by weight; weight per gal. 9.44 lb. at 20C.; density 1.133 at 20C. ; pH (Beckman meter) 3.4-3.8. Us e: Bleaching of textiles such as cotton, wool, silk, rayon, linen, and blends of these fibers with synthetic fibers; bleaching of wood pulps such as cold soda, groundwood, kraft, sulfite, and recovered pulp; bleaching of practically all vegetable and animal fibers, fur, straw, etc.; fur carroting; puri fication of metais solutions; treatment and sterilization of starch, glue, etc.; bleaching of wood panels and furniture; bleaching of oils and fats; oxidation of vat dyes; dilution for pharmaceutical and cosmetic uses; general oxidizing reactions, and for the manufacture of alkaline earth peroxides and organic peroxides such as methyl ethyl ketone peroxide; in epoxidation and hydroxylation reactions; as a polymerization catalyst for unsaturated monomers such as butadiene, styrene, etc.; as a viscosity control agent for starch and cellulose derivatives; in electroplating; as a gasifying agent for manufacture of such materials as foam rubber. Co n t a in e r s : 120-lb. carboys; 250-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4,000-, 6,000-, and 8,000-gal. tank cars. DUP210010803 ELECTRQCHEMJCALS DEPARTMENT SODIUM AND CYANIDE PRODUCTS Hydrogen Peroxide (Continued) "Al b o n e" SO Hy d r o g e n Pe r o x id e : H202 content 50% by weight; active oxygen 23.5% by weight; weight per gal. 9.98 lb. at 20C.; density 1.196 at 20C. ; pH (Beckman meter) 2.4-2.7. Us e: Same as "Albone" 35, above. Co n t a in e r s : 265-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4.000-, 6,000-, and 8,000-gal. tank cars. Hy d r o g e n Pe r o x id e 70%: Hs02 content 70% by weight; active oxygen 33% by weight; weight per gal. ' 10.7 lb. at 25C,; density 1.288 g./cc. at 20C.; pH (Beckman meter) approx. 1.1. Us e: In organic syntheses where minimum water content is required. Co n t a in e r s : 285-lb. double compartment drums; 275-lb. single com partment drums (for carload or truckload shipment only); 4,000-, 6,000-, and 8,000-gal. tank cars. Hy d r o g e n Pe r o x id e 90%: H202 content 90% by weight; active oxygen 42.3% by weight; weight per gal. 11.61 lb. at 20C.; density 1.3913 g./cc. at 20C. Us e: Monopropellent and fuel oxidant. Co n t a in e r s : 285-lb. double compartment drums; 275-lb. single compartment drums (for carload or truckload shipment only); 4,000-, 6.000-, and 8,000-gal. tank cars. "Pe r o n e " 35 Hy d r o g e n Pe r o x id e : Physical properties similar to those of "Albone" 35,- above. Us es : In elec tronic applications and other specialty uses. Co n t ain e r s : 120-lb. carboys; 250-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4.000-, 6,000-, and 8,000-gal. tank cars. "Pe r o n e " 50 Hy d r o g e n Pe r o x id e : Physical properties similar to those of "Albone" 50, above. Us es : In elec tronic applications and other specialty uses. Co n t ain er s : 265-lb. drums; tank trucks for delivery in Boston, New York, and Philadelphia areas; 4,000-, 6,000-, and 8.000-gal. tank cars. "Oxone" Monopersulfate Compound: An acidic, white, granular, free flowing solid containing the active ingredient potassium peroxymonosulfate; readily soluble in water; 1% solution has pH of 2-3. Minimum active oxygen content 4.5%. Strong oxidizing agent. Us e: For manufacture of dry laundry bleaches, detergent-bleach washing com pounds, scouring powders, plastic dishware cleaners, and metal cleaners; preparation of hair wave neutralizers and pharmaceuticals; general oxidizing reactions. Co n t a in e r s : 50-lb. multiwall bags. Sodium Perborate Tetrahydrate--NaB03-4H20:Technical and N. F. Grades. An alkaline, white powder, soluble in water and acid solutions; in water, gives slightly alkaline solution containing hydrogen peroxide and borate; active oxygen content min. 10%; sodium perborate content min. 96.2%; Technical Grade passes 20 mesh screen. Us e: Bleaching textiles; oxidizing agent for vat colors; assistant to textile detergents; constituent of dentifrices and phar maceuticals; ingredient in dry laundry bleach powders and plastic dishware stain removers; polymerization catalyst. Co n t ain er s : 100-lb. multiwall bags; 250-lb. fiber drums. Sodium Peroxide--Na202: Pale yellow, beadlike solid; stable when dry; readily dissolves in cold water to form alkaline hydrogen peroxide solution. Na202 content min. 96%; active oxygen content approximately 20% by weight. Te c h n ic a l Gr a d e ("So l o z o n e " So d iu m Pe r o x id e DFF): Dustless, free flowing; bulk density approx. 95 Ib./cu. ft.; melting point above 450C.; in water solution releases 103% of its weight as caustic soda. Us e: Bleaching of wood pulps such as groundwood, cold soda, kraft, sulfite, and recovered pulp; bleaching cotton knit goods; purification of metal salts; manu facture of inorganic and organic peroxides such as benzoyl peroxide; general oxidizing agent. Co n t a in e r s : 75-lb. pails; 400-lb. drums. Ca l o r if ic Gr a d e : All passes 28 mesh. Meets A. C. S. specifications. Us e: For calorific determinations. Co n t a in er s : 65-lb. pails. "Soiozone" Sodium Peroxide: (See Sodium Peroxide.) Zinc Peroxide--ZnO: Fine, grit free, white powder com posed of zinc peroxide and zinc oxide; ZnOa content min. 57.82%; active oxygen content min. 9.5% by weight. Technical Grade. Insoluble in water; dissolves readily in acid media to form hydrogen peroxide solution. Us e: For manufacture of deodorants, dusting powders, ointments, bleaching creams, and foot powders. Co n t a in er s : 100-lb. drums. SODIUM AND CYANIDE PRODUCTS Case Hardener: (See Cyanide Mixtures.) Copper Cyanide: (See Page 9.) "Perdox" Sodium Borate Perhydrate: A free flowing, white powder; dissolves readily in water to produce mildly alkaline peroxide solution. Equivalent NaB03'H20 content min. 96.6%; active oxygen content min. 15.5%. Us e: For preparation of dentifrices and hair wave neutralizers; bleaching; oxidation of dyes; stain remover for plastic dishes. Co n t ain er s : 125-lb. fiber drums. `Perone" Hydrogen Peroxide: (See Hydrogen Peroxide.) Sodium Borate Perhydrate: (See "Perdox" Sodium Borate Perhydrate, above.) Cyanide-Chloride Mixtures 75%, 45%, and 30%: (See Cyanide Mixtures.) Cyanide Mixtures (Cyanide-Chloride Mixtures, Case Hardener): White fused slabs 3 in. x 1% in. x 1 in. (ap proximately 3 oz.) or granular form. Us e: Case hardening of steel. Co n t ain er s : 100-lb. cases (containing twenty 5-lb. steel, ten 10-lb. steel, or four 25-lb. fiber containers); 100- and 200-lb. steel drums. 75% Cy a n id e -Ch l o r id e Mix t u r e : Sodium cyanide content min. 75%, sodium chloride min. 12%, sodium carbonate max. 13%. F. P. approx. 1094F. (590C.); Sp. Gr. L74 at 77F. (25C.), 1.26 at 1580F. (860C.). 11 DUP210010804 ELECTROCHEMICALS DEPARTMENT VINYL PRODUCTS Cyanide Mixtures (Continued) 45% Cy a n id e -Ch l o r id e Mix t u r e : Sodium cyanide content min. 45%, sodium chloride min. 45%, sodium carbonate max. 10%. F. P. approx. 2247F. (675C.); Sp. Gr, 1.91 at 77F. (25C.), 1.37 at 1580F. (860C.). 30% Ca s e Ha r d e n e r : Sodium cyanide content min. 30%; sodium chloride min. 25%, max. 35%; sodium carbonate max. 45%. F. P. approx. 1090F. (587C.); Sp. Gr. 2.12 at 77F. (25X.), 1.52 at 1562F. (850C.). "Cyanobrik" Sodium Cyanide; Briquette form. (See Sodium Cyanide 97%, below.) "Cyanogran" IVI Sodium Cyanide: Granular form. (See Sodium Cyanide 97%, below.) Hydrogen Cyanide (Hydrocyanic Acid; Prussic Acid) --HCN: A clear, colorless liquid containing 99.5% min. HCN. Odor of bitter almonds. Vapors extremely poisonous. Miscible with water and most organic solvents. Spec. gr. 0.714 at 5C., 0.695 at 18C.; b.p. 25.7C.; f.p. --13.3C. Us e s : Chemical syntheses. Co n t ain er s : 5,000-gal. tank cars. Potassium--K; Soft silvery metal; extremely reactive; M. P. 147F. (63.7C.); B. P. 1400F. (760C.). Available in 34-oz. sticks (1 in. x 1 in.) and 1-, 2J4-, and 434-lb. bricks. Us e: Laboratory reagent; preparation of inorganic potassium compounds such as oxide, peroxide, or cyanide; in organic reactions involving condensation, dehalogenation, reduction, and polymerization. Co n t a in e r s : 1-lb. tins (boxed) with inside glass bottles containing J4-oz. sticks; 25-lb. pails of bricks. Potassium-Copper Cyanide Double Sait: (SeePage 9.) Potassium Cyanide--KCN: A white, granular, poisonous chemical; contains 98% min. potassium cyanide. Us e: In high speed copper and silver plating processes; with sodium cyanide for cyanide nitriding. Co n t ain e r s : 100-lb. steel drums. Sodium--Na: A silvery white metal; soft and ductile; extremely reactive; M. P. 208F. (97.8C.); B. P. 1638F. (882C.); weight at M. P. 59.4 lb./cu. ft. (solid); inert toward dry petroleum ether, toluene, kerosene, naphtha, and other hydrocarbon liquids but reacts vigorously with water. Supplied in 1-, 2%-, 5-, and 1234-lb. bricks; contains 0.04% calcium max. and 0.005% chloride max. Us e: In manufacture of indigo and dye intermediates, chemicals, perfumes, and drugs; as a "scavenger" and deoxidizer in metal melting and refining; metal descaling; and as a heat transfer medium. Co n t a in e r s : 50-lb. cases (two 25-lb. pails of 1- or 234-lb. bricks), 100-lb. cases (ten 10-lb. tins of 234-lb. bricks), 220-, 280-, and 290-lb. drums (1-, 2J4-, 5-, or 1234-lb. bricks), 400-lb. nonreturnable drums (fused sodium), and 78,000-lb. tank cars. Sodium-Copper Cyanide Double Sait: (See Page 10.) Sodium Cyanide 97%--NaCN: A white solid fused in 1-oz. briquettes ("Cyanobrik" sodium cyanide) and in granular form ("Cyanogran" M sodium cyanide): M. P. 1040F. (560C.); B. P. 2732F. (1500 C.). Sodium cyanide content--97% min. Us e: Heat treating of steel; in electro plating; in cleaning of metal, including neutralizing after pickling; in fumigation; unhairing of hides; for manu facture of indigo, dye intermediates and other chemical compounds; in the extraction of gold, silver, zinc, and lead from ores. Co n t ain er s : 100- and 200-lb. drums. Sodium Monoxide--NasO: Light gray, fine, spherical particles. Usually contains a small amount of free sodium (1%_2%) nnH mny Cr'rltS'*T^ onrr oil c>rviq 'mb q T" peroxide (l%-2%.) Us e: As a condensing or polymerizing agent in organic reactions; as a dehydrating agent, Co n t a in e r s : 60-lb. pails; 350-lb. steel drums. Sodium Sulfocyanide(Sodium Thiocyanate)--NaCNS: Available in anhydrous form and as solution. Us e: In electroplating, textile printing, processing of color film, preparation of sulfocyanide compounds. An h y d r o u s : Grayish-white granules; NaCNS content min. 98%; soluble in water and alcohol; M. P. 549F. (287C.). Co n t ain er s : 25- and 100-lb. fiber drums. So l u t io n : Aqueous solution of high purity; colorless; NaCNS content min. 47% (sold on basis of 100% NaCNS). Co n t a in er s : 500-lb. steel drums. Zinc Cyanide: (See Page 10.) VINYL PRODUCTS "Elvacet" Poiyvinyi Acetate Emulsion: Viscous, milkwhite water dispersions of polyvinyl acetate or of copoly mers of polyvinyl acetate which can be diluted with water. Films or coatings formed by the evaporation of water are thermoplastic, grease resistant and, in some cases, water resistant; they exhibit excellent adhesion to a wide variety of materials. The emulsions possess the desirable properties of high solids content at workable viscosity and ease of application from a water medium which eliminates the need for expensive and flammable solvents. Weight per gal. approx. 9.2 lb. "Elvacet" is available in the following grades: Grade Type Viscosity of Emulsion (Brookfield) poises Solids Content 80-900 81-900 81-1600 81-3300 84-1100 1423 1440 Homopolymer Homopolymer Homopolymer Homopolymer Homopolymer Copolymer Homopolymer 8-10 8.5-10 15-17 30-35 9-13 9-15 8-15 55% min. 55% min. 55% min. 55% min. 54%-56% 55% min. 54%-56% Us e : Paint vehicles; adhesive base materials for cellophane, wood, paper, cloth, ceramics, leather, cork, and metals; hinders for paper pulp, sawdust, leather scrap, sand, clay, nonwoven fibers, pigments, and cement; textile finishes and sizes; paper coatings for greaseproofing and heat-sealing. Co n t ain er s : 45-lb. steel pails; 500-lb. steel drums; 500-lb. fiber drums; 19,000- to 32,000-lb. tank trucks; 37,000- and 75,000-lb. tank cars. DUP210010805 ELECTROCHEMICALS DEPARTMENT VINYL PRODUCTS "Elvacet" Polyvinyl Acetate Solution ("Elvacet" 60-05): Colorless, odorless synthetic resin available as a 60% solution in methanol. The resin is thermoplastic, stable to light and heat, soluble in a number of organic solvents and compatible with many resins and plasticizers. Because of its strong adhesion to most types of surfaces, and excellent heat-sealing properties, polyvinyl acetate is widely used in adhesive and binder applications. Us e: Ad hesive and binder; vehicle for metallic pigments; protective coatings on metal; heat-seal applications; greaseproofing; stiffening and permanent sizing. Co n t a in er s : 38-lb. pails, 400-lb. drums. "Elvanol" Polyvinyl Alcohol: Water-soluble synthetic resin; white to creamy-white powder; odorless; pH 6-8; density 1.21-1.31 at 20C. Available in 8 grades covering various degrees of hydrolysis in three viscosities (high, medium, and low). Grade Viscosity of 4% Water Solution at 20C. (cp) % Hydrolysis 72-60 . 72-51 . 50-42 . 71-30 . 71-24 . 52-22 . 70-05 . 51-05 . .... .... .... .... .... .... .... .... 55-65 45-55 35-45 28-32 23-28 21-25 4-6 4-6 99 -100 97.7 - 98.4 87 - 89 99 -100 97.7- 98.4 87 - 89 99 -100 88 - 89 Polyvinyl alcohol solutions are stable over long periods of time. Films and coatings from these solutions are exceed ingly tough, colorless, unaffected by all oils, greases, fats, hydrocarbons and most organic solvents, and possess a high degree ofimpermeability to gases and air. Us e : Textile warp size; size for nylon and rayon knitting yarns; pigmented paper coating binder; greaseproofing paper; paper size; top size on paperboard for high gloss printing; wet strength paper laminating adhesive; nonblocking, remoistenable adhesive; adhesive and binder for leather, cloth, nonwoven fabrics, and paper; pigment binder; temporary protective coatings; molded products; emulsifying agents; emulsion stabilizer and thickener; photosensitive films; chemical intermediate. Co n t a in e r s : 10- and 25-lb. fiber cartons; 50-lb. multiwall bags; 100-lb. fiber drums. "Elvax" Vinyl Resins: Highly wax-compatible, amor phous polymers. Translucent, white, diameter, free- flowing pellets. Supplied in two basic compositions--one for hot-melt adhesive and coating formulation, the other for toughening waxes. Viscosities (at 30C., 0.25% in toluene) 0.7/ cp. and 0.85 cp., respectively. Readily soluble in waxes, various low molecular weight resins, and rosin esters; insoluble in aqueous mixtures and most polar sol vents; density at 30C., 0.95; extensibility 700%-at break. Us es : As a wax additive, improves toughness, reduces flaking, improves heat-seal bond strength. "Elvax"-wax coatings used for improved wax overwrap and tough, heat- sealable, sheet-waxed carton-board which retains low moisture vapor transmission, even after creasing. In lami nating formulations for paper to paper and paper to cellophane, polyethylene, polystyrene, "Mylar" Polyester Film, or other plastic films, and to metal foils; as a base for hot-melt adhesives; as a low dielectric component in potting compounds. Co n t ain er s : 50-lb. bags. Vinyl Acetate--CH3COOCH=CH2 : An extremely pure monomer for polymerization or copolymerization reactions. A flammable, volatile, highly reactive liquid with a pleasant odor. As shipped, it is stabilized with hydroquinone or phenothiazine. Boiling range 72.3-73.0C. (162.1-163.4F.); Sp. Gr. 0.9335-0.9345. Us e: Monomer for polymerization or copolymerization reactions employ ing suspension, emulsion, or solution techniques; chemical intermediate. Co n t ain e r s : 375-lb. steel drums; 4,000-gal. tank trucks; 8,000- and 10,000-gal. tank cars. DUP210010806 EXPLOSIVES DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES: Explosives Sales: Birmingham 13, Alabama Chicago 46, Illinois Denver 2, Colorado Duluth 2, Minnesota Huntington 1, West Virginia Joplin, Missouri New York 1, New York Pittsburgh 22, Pennsylvania Seattle 1, Washington No. 9 Office Park, Mountain Brook 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) Midland Savings Building, 444 Seventeenth Street Hartley Building, 742 East Superior Street West Virginia Building, Fourth Avenue and Ninth Street First National Building, 402 Main Street 4700 Empire State Building, 350 Fifth Avenue One Gateway Center 1127 Washington Building TRemont 9-0466 ORchard 5-1010 MAin 3-1253 RAndolph 4-8593 JAckson 5-5124 MAyfair 4-5060 LOngacre 3-6400 ATlantic 1-7777 MAin 3-8830 Chemical Sales: Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 46, Illinois Cleveland 20, Ohio Houston 27, Texas Los Angeles 58, California New York 1, New York 140 Federal Street 427 West Fourth Street 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 11900 Shaker Boulevard 3202 Weslayan Street 2930 East 44th Street 4700 Empire State Building, 350 Fifth Avenue HAncock 6-1724 FRanklin 5-5561 ORchard 5-1010 LOngacre 1-5070 MOhawk 7-9197 LUdlow 2-6464 LOngacre 3-6400 PLANTS: Na me o f Pl a n t Barksdale Belin Birmingham Carl Junction Carneys Point DuPont Louviers Pompton Lakes Potomac River Repauno Seneca Ra il w a y St a t io n Barksdale, Wisconsin /Moosic, Pennsylvania (L.C.L.) 1 .Hillside Junction, Pennsylvania : l (C.L.&L.C.L.)) Mineral Springs, Alabama Carl Junction, Missouri Carneys Point, New Jersey DuPont, Washington Louviers, Colorado Pompton Lakes, New Jersey Martinsburg, West Virginia Gibbstown, New Jersey Seneca, Illinois Ma il Ad d r e s s Barksdale, Wisconsin Moosic, Pennsylvania Watson, Alabama Carl Junction, Missouri Penns Grove, New Jersey DuPont, Washington Louviers, Colorado Pompton Lakes, New Jersey Martinsburg, West Virginia Gibbstown, New Jersey Seneca, Illinois EXPLOSIVES SALES PRODUCTS In d ic a t e s Re s a l e Pr o d u c t s BLASTING SUPPLIES AND ACCESSORIES Blasting Caps: Small aluminum cylinders, closed at one end and loaded with a charge of fulminating compound, which is exploded by the spit or sparks from safety fuse. Furnished in two strengths: No. 6 and No. 8; No. 8 being the stronger. Us e: For firing high explosives with safety fuse. Co n t a in e r s : 10, 25 and 100 caps per box. Blasting Caps, Electric: No. 6 and No. 8 strengths, designed to be exploded by electric current. Nylon plastic insulated copper or iron wires. Lengths of wires range from 4 ft. up for copper and from 4 to 20 ft. for iron. Us e: For firing high explosives electrically. Co n t a in e r s : 25 and 50 per carton. Blasting Caps, "Acudet" Electric Delay: Similar to electric blasting caps but having time intervals of 2 75 to 1100 milliseconds (approximately) between periods. Us e: For shots to be fired in rotation with a single set of wiring and with one application of electric current. Co n t ain e r s : 25 and 50 per carton. Blasting Caps, Electric MS Delay: Similar to delay blasting caps but having time intervals of 25, 50 or 100 milliseconds (approximately) between periods. Co n t a in e r s : 25 and 50 per carton. Blasting Caps, Electric "SSS" Seismograph: (See "SSS" Seismograph Electric Blasting Caps.) 14 DUP210010807 EXPLOSIVES DEPARTMENT "Blasting Galvanometer: A small direct reading ohmmeter contained in a leather case. Us e: To determine resistances of electric blasting caps, electric squibs, leading wire and the completed blasting circuit. "Blasting Machines: Used for the generation of current for the firing of electric blasting caps, electric squibs, etc. Types of machines are as follows: Rated Capacity Str. Par. Par. Series Series "CD-12-1......................... NR NR 30 *CD-32-l......................... 30 480 125 "CD-48-1......................... 60 1200 200 "No. 10 Twist.................... NR NR 10 "Permissible Multiple Type NR NR 10 "Permissible Multiple Type NR NR 20 "Pushdown No. 30 . . . NR 150 30 "Pushdown No. 50 . . . NR 250 50 NR =Not Recommended "Blasting Switch: Used for the power firing of blasts. Especially designed from the standpoints of safety and reliability. *Cap Crimper (No. 4): Makes waterproof crimp on a cap when a smooth surface fuse is used. Equipped with fuse cutter. "Cap Crimper, Superior: Bench type cap crimper which produces waterproof crimp. Hand or foot operated. Equipped with fuse cutter. "Connecting Wire: No. 20 and No. 22 gauge copper wire with plastic or paraffin coated cotton insulation. Us e: To connect an electric blasting cap of one hole to another hole when the attached wires are not long enough. Detonators (Fuses and Primers): (See Blasting Caps.) "Elcord" Delay Units: Employed with "Nitramon" S in seismic prospecting. Permit matching ground velocities in the range 5,000-10,000 ft. per sec. Us e: To minimize "ghost" reflections and improve signal-to-noise ratio. "Fuse Lighters Hot Wire: Similar to toy sparkler. Has black powder composition on an iron wire. "Ignitacord and Thermalite Ignitacord: Cordlike materials which bum with a hot external flame. Used for igniting fuse so as to obtain rotational firing. Lead Spitter: A tube of lead filled with black powder. Master: Device for lighting two to six fuses simul taneously. "Quarrycord: Similar to Ignitacord but specially con structed to burn at a speed of about one foot per second. Used for igniting fuse in multiple blockhole secondary blasting with the added feature of remote firing. Ideal "Fuse Lighters (Continued) for use in thunderstorm season and not affected by stray currents. Safety Match: Short paper tube coated at one end with match composition. The lighter is slipped over end of fuse and ignited by a match or striking with match box cover. Jet Tappers: Shaped charges for tapping open-hearth steel furnaces. Co n t a in e r s : 20 per carton. "Leading Wire: No. 16 gauge solid copper wire, insulated with plastic or rubber composition (waterproof) or cotton coated with paraffin (dampproof). Us e : As connecting source of electric current to blasting cap circuit. Co n t ain e r s : 125-, 250- and 500-ft. lengths. "Portable Magazines: Sectional steel construction; made in various sizes from 5 to 40 ton capacity. Us e: For storing high explosives, blasting powder and blasting caps. t*"Primacord" Detonating Fuse: Consists of a fabric tube about 0.21 in. in diameter, filled with pentaerythrite tetranitrate (PETN), a high explosive. Detonates with plain or electric blasting cap at a velocity of 20,300 ft. per second. Four types: Plain, Reinforced, Plastic Reinforced and Plastic Wire Countered. Us e: For firing large blasts and deep well drill holes. Co n t a in e r s : Spools containing 500 or 1,000 ft. }"Primacord" MS Connectors: Device for insertion into "Primacord" lines. Us e: To provide delays of approxi mately 0.005, 0.009 or 0.017 second. Co n t ain e r s : 50 per tube, 500 per carton. , "Rheostat: An electric resistance bridge, having six bind ing posts and five different units of resistance wire between. Us e: To determine when a given blasting machine is work ing at' its rated capacity. "Safety Fuse (Bickford's Fuse): Consists of a core of A type black powder enclosed in several wrappings of jute and cotton threads with waterproofing asphalt type layers between the wraps. Many different types and brands are available. Us e: For single blasts with black powder; for firing other explosives in conjunction with a blasting cap. "Sectioning Switch: Used as a safety switch in blasting lines for power firing circuits. Squib, Electric: An aluminum cylinder containing a deflagrating charge ignited by an electric current. Us e: For firing pellet and blasting powder electrically. "SSS" Seismograph Electric Blasting Caps: Us e: Especially developed for shooting explosive charges in oil prospecting. No time lag between severance of bridge wire and firing of the cap. Co n t ain e r s : 5, 10, 25 and 50 per carton depending on wire length. "Tamping Bags: Heavy kraft paper bags, glued with waterproof cement; sizes from in. in diameter and 8 to 24 in. in length. Us e: To hold sand, clay, etc., for stemming (confining) the charges of explosives in bore holes. Co n t a in er s : Bale lots of 5,000. ^Trademark of The Ensign-Bickford Company. 15 DUP210010808 EXPLOSIVES DEPARTMENT *VoItohmeter: A combined blasting galvanometer, stray current detector and AC-DC voltmeter. Us e: Serves the same purposes as the Blasting Galvanometer and offers a means for guarding against stray currents of a magnitude which would be hazardous in electric blastings. It also offers a means of checking line voltages in power blasting circuits. EXPLOSIVES Black Sporting Powder: A uniformly dense black powder manufactured in four granulations---Fg, FFg, FFFg and FFFFg ranging respectively from coarse to fine. Us e: The Fg or coarse grain is used for loading large capacity car tridges ; the FFg or intermediate grain for medium capacity cartridges and the FFFg, FFFFg or fine grain for small capacity cartridges or general shotgun shooting. CON TAINERS: Each size is packed in 1-lb. metal canisters and 25-lb. metal kegs. "Hi-Cap" Dynamite: A series of low cost ammonia dyna mites, ranging from 120 to 150 cartridges per 50-lb. case in the 1)4 x 8 in. size. Us e: In mining and quarrying the softer ores and materials such as limestone, gypsum, salt, clay, etc. "Hi-Veloclty" Gelatin: A low density straight gelatin which has the property of always exploding at a very high velocity. This is not the case with most gelatins, which o i,,,,. -- .4-.-- ,,i., --: i uCiu>- <-j. 1UV1' V Uiuvco s-wixAllA^U. AAA UUIUltin. or detonated by a straight 60% primer. Us e : Oil, gas and water well shooting, submarine blasting, mudcapping. "Hi-Velocity" Seismograph 60% Gelatin: A straight gelatin especially designed and packaged for use in seismic prospecting. Recommended for deep hole work and lengthy water exposures. Offered in plain or Fast-Coupler cartridges. Loggers' Powders: 15 to 30% strengths. Us e: Blasting stumps for the logging industry in the Pacific Northwest. Blasting Gelatin (S.N.G.): Solidified nitroglycerin. A rubbery, elastic substance, resembling printers' rolls or art gum in appearance. It is the strongest commercial explosive. Us e: In shooting oil wells. Co n t ain e r s : 28.5-lb. (10-qt.) and 57-lb. (20-qt.) cases, 50-lb. cases for use other than in oil wells. Blasting Powder (Saltpeter or A Blasting Powder): A composition of potassium nitrate, charcoal and sulfur. Available in a wide range of grain sizes. Us e: For fireworks; for blasting dimension stone and architectural stone; for quarrying slate; used in safety fuses. Co n t a in e r s : 25-lb. kegs. Blasting Powder (Soda or B Blasting Powder): A composition of sodium nitrate, charcoal and sulfur. Avail able in a wide range of grain sizes. Us e: For coal mining (principally); for construction work when dry; for clay mining and open pit ore mining. Co n t a in er s : 25-lb. kegs. Ditching Dynamite: A 50% straight dynamite, espe cially packed so that it will have the greatest possible uniformity, cartridge for cartridge, and will give the best results in propagation ditching. "Extra" Dynamite: Ammonia dynamites ranging from 115 to 172 cartridges (1)4 x 8 in.) per 50-lb. case. Available in both "high" and "low" velocity types. Us e: In mining soft ores, limestone, gypsum, salt, clay, etc. In quarrying as top loads in well drill holes and as blockhole charges in secondary blasting. Gelatin Dynamite (Straight Gelatin): A plastic, highly water .resistant, dense explosive furnished in grades from 20 to 90% strengths. Us e: For blasting in wet boreholes; for submarine blasting and blasting in quarries; for tun neling, shaft sinking and mining hard, tough materials. "Gelex" Dynamites: Semigelatin dynamites having plasticity and water resistance between the dynamites and true gelatins. Us e; In mining metallic ores, gypsum, lime stone and in quarrying. Gypsum A Dynamite: A modified "Extra" dynamite. Us e; Especially designed for mining gypsum. Nitroglycerin--C3Hs(N03)3: An oily liquid; Sp. Gr. ap proximately 1.6. Us e: Essential ingredient in all DuPont dynamites; sold to drug trade in alcohol solution or with French chalk or sugar of milk to be used for medicinal purposes. Pellet Powder (Soda or B Blasting Powder): An improved deflagrating explosive. Us e: In mining coal where permissibles are not needed. Made in two grades in cylin ders 2 in. long, with a central perforation of in. Four of these cylinders are placed end to end and wrapped in paraffined paper to form cartridges. Available in diameters from 1)4 to 2 in. Permissible Explosives: Explosives which have been tested by U. S. Bureau of Mines and passed as safe for blasting in gaseous and dusty mines if used in accordance with certain specified conditions. "Duobel" Explosives: High velocity permissibles fur nished in five grades based upon velocity and cartridge count. Us e: For mining coal where lump coal is not a factor. "Gelobel" Explosives: Gelatin and semigelatin type permissibles; high density and high water resistance. Us e; For coal mining where high strength, high velocity, concentration of charge and water resistance are desired. "Lump Coal'' C Explosives: A product with a very low velocity of detonation. Us e: For coal mining where maximum production of large size coal is desired. "Lump Coal" CC Explosives: A low velocity per missible similar to "Lump Coal" C except that due to slight change in the ingredients it can be manufactured in smaller diameter cartridges. Us e: For coal mining where maximum production of large size coal is desired. "Monobel" Explosives: Low velocity permissibles; fur nished in six grades based upon velocity and cartridge count. Us e: For mining coal especially where lump is desired. "Red Cross" "Extra" Dynamite: High density, general purpose ammonia dynamites of 20 to 60% strengths. Us e : For quarrying, stripping, agricultural and general con struction work. 16 [M DUP210010809 EXPLOSIVES DEPARTMENT ''Red Cross" F.R. Dynamites: Four grades of dynamite (based upon strengths) with free-running characteristics (F.R.). Designed for use in sprung holes and adapted for replacing black powder in quarrying and in blasting soft rock. Co n t a in e r s : 50-lb. case containing four 12)4-lb. bags. "Seismex" Dynamite: An ammonia dynamite for seismic ----.x.-- depths over 200 feet, with immediate shooting, or for any type of "sleeper" work if water is present. Offered in plain or Fast-Coupler cartridges. "Seismex" PW Dynamite: An ammonia dynamite for seismic prospecting in shallow-hole patterns. Very low cost but has water resistance sufficient only for work that is loaded and shot on the same day. Offered in plain or FastCoupler cartridges. "Seismogel" Gelatin: A straight gelatin dynamite de signed and packaged for use in seismic prospecting when water conditions are only moderately severe. Offered in plain or Fast-Coupler cartridges. The latter provide a convenient means for assembling a rigid column ofexplosive. Special Gelatin Dynamite (Ammonia Gelatin): A plastic, highly water resistant (not as good as Straight Gelatin), dense explosive furnished in grades from 25 to 90% strengths. Us e: In mining hard rock, tunneling, quarrying, construction work, shaft sinking (ifnot too wet). Straight Dynamite: Produces quick shattering action; is very sensitive to impacts; 20 to 60% nitroglycerin. Us e: In ditching by the propagation method, submarine blasting. "Stripkoiex" Dynamite: A dynamite designed espe cially for shooting the coal in stripping operations. BLASTING AGENTS Akremite: A low cost blasting agent packed in plastic, expansible containers. Us e: For quarries, strip mines, etc. using large size blast holes. The plastic containers expand to fill the holes and offer a moderate degree of water re sistance. Note: Akremite is a patented product on which DuPont is exclusive licensee with right to sublicense. Akremite can be safely manufactured by the consumer and licenses are available for this purpose. "Nilite" Nitro Carbo Nitrate: Low cost, packaged blast ing agent. Us e: For blasting in quarries, strip mines, con struction work, etc. Co n t ain e r s : Heavy paper shells or round lined burlap bags 4J4- to 9-in. diameter. "Nilite" 101 Nitro Carbo Nitrate: A low cost, freerunning blasting agent, having a density from 0.70-0.75. Us e: For blasting in quarries', strip mines, construction work, etc. where water resistance is not needed. CON TAINERS: 50-lb. paper bags. "Nilite" 202 Nitro Carbo Nitrate; A low cost, freerunning blasting agent, having a density of from 0.85-0.90. Us e: For blasting in quarries, strip mines, construction work, etc. where water resistance is not needed. Co n t a in e r s : 50-lb. paper bags. "Nilite" WR Nitro Carbo Nitrate: A low cost, packaged blasting agent, having moderate water resistance. Us e : For blasting in quarries, strip mines, construction work, etc. Co n t ain er s : Round, lined burlap bags 4)4- to 9-in. in diameter. "Nitramex" No. 2-H Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge hammers or by heat. Is detonated by specially constructed primers. Us e: For blasting in extremely hard shooting quarries and strippings. Co n t ain e r s : Metal cans 4)4- to 9-in. diameter x 24 in. "Nitramite" FR Nitro Carbo Nitrate: A free-running blasting agent, having a density of 0.85-0.95. USE: For blasting in quarries, strip mines, construction work, etc. Co n t a in e r s : 50-lb. paper bags. "Nitramite" Nitro Carbo Nitrate: Low density blast ing agent similar to "Nitramon", packed in heavy paper shells. "Nitramite" is as insensitive to shock and friction as "Nitramon". It must be detonated by a specially con structed primer. Us e: Excellent for relatively easy shoot ing material, top loads, and for certain coyote shot layouts. Co n t ain er s : 3- to 9-in. diameter. "Nitramon" Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge ham mers, the strongest commercial blasting cap or by heat. Is detonated by specially constructed primers. Us e: For blasting in quarries and stripping operations. Co n t a in er s : Metal cans 4)4- to 9-in. diameter. "Nitramon" No. 2 Blasting Agent: A blasting agent having all the safety features and in all respects similar to "Nitramon" except that it is of lower strength and velocity and sells at a lower price. Like "Nitramon", it is detonated by specially constructed primers. Us e: For blasting in quarries and stripping operations. Especially adapted for top hole loading. Co n t a in e r s : Metal cans 4)4- to 9-in. diameter. "Nitramon" HH Blasting Agent: Same general prop erties as "Nitramon" but highly heat-stable. USE: Strip blasting over burning coal. Co n t a in e r s : Cans 4)4- to 9-in. diameter. "Nitramon" S Blasting Agent: Has the same charac teristics as "Nitramon", but is packed in cans which screw together to form a rigid charge. Us e: For seismic pros pecting. Co n t a in e r s : 2 in. x 1 lb., 2)4 in. x I lb. "Nitramon" WW Blasting Agent: Same character istics as "Nitramon". Us e : For seismic prospecting at sea. Co n t a in e r s : 10-, 16%-, 25-, 30-, 40- and 50-lb. cans. Pelietol No. 1: A high density, free-running blasting agent which sinks readily in water and has unlimited water resistance. Safety characteristics similar to those of "Nitramex" No. 2. Us e: For loading around "Nitramon" and "Nitramex" No. 2H. Co n t a in e r s : Packed 4 bags per 50-lb. case. 17 DUP210010810 EXPLOSIVES DEPARTMENT Primer for "Nitramite" Nitro Carbo Nitrate: A non nitroglycerin product packed in metal cans which can be fired with either "Primacord" or a cap. Especially de veloped for priming "Nitramite" but can be used with all other DuPont blasting agents, "Tovex" and AN prill-oil mixtures. Co n t ain e r s : Cans 4 in x 514 lbs. and in. x 9 lbs. Primer for "Nitramon" and "Nitramex" No. 2-H Blasting Agents: Us e: Special foi detoustixig "Nitramon" and "Nitramex" No. 2H. Must be initiated by "Primacord" Detonating Fuse. Co n t a in er s : Metal cans 4-, 5-, 5}/2-, 7- and 8-in. diameter x 24 in. Primer for "Nitramon" S Blasting Agent: Primers which screw tightly to "Nitramon" S. Detonated by elec tric blasting cap or "Primacord". Us e: To detonate "Nitramon" S in seismic prospecting. CONTAINERS: 2 in. x 1 lb., 23^ in. x 1 lb. "Tovex" Gel: A non-nitroglycerin, water compatible explosive slurry. Not cap sensitive and must be shot with a suitable primer ("Nitramon" primers are recommended). Gives very high loading density. Us e: In quarries, open pit mines and construction work where the rock or ore is massive and hard to break. Co n t ain er s : Polyethylene tubes 5 in x 30 lbs. Water Work Booster: Small copper tubes containing a priming charge which are inserted in a copper well in the "Nitramon" WW cans. Detonated by an electric blasting cap. Us e: To bring about the explosion of "Nitramon" WW. Co n t a in e r s : Cartons of 50, cases of 500. DUP210010811 CHEMICAL SALES PRODUCTS Acetate Flake: Secondary cellulose acetate in flaked or powdered form, of approximate average composition CeH,02(0H)K(CHsC00)2M- Us e: In the plastics in dustry for making sheets, rods, tubes and molding powder; sheets for wrapping purposes; in photographic film industry for making x-ray and other safety films; in lacquer industry for making certain miscellaneous lacquers; in textile in dustry for making lacquer coating for fabrics, etc.; in wire industry for making lacquer coating for insulated wire. Co n t a in er s : Moisture resistant sacks containing 50-lb. Ammonium Nitrate--Reagent Grade--NH4N03: Crys talline or granular powder. Us e: Where a product having a minimum purity of 99.95% is required, i.e. laboratory reagents, uranium processing and as a solid fuel propel lant. Co n t a in e r s : 100-lb. polyethylene-lined paper bags, 400-lb. polyethylene-lined fiber drums. Ammonium Nitrate--Technical Grade--NH4NO3: Crystalline or granular powder, and solution. Us e: Manu facture of explosives, paper, and other materials not requiring a chemically pure product. Co n t a in e r s : 100-lb. paper bags, 400-lb. fiber drums, tank cars, tank trucks. Ammonium Nitrate--U.S.P. ("Niox" Ammonium Nitrate)--NH4N03: Crystalline or granular powder and solution. Us e : In manufacture of nitrous oxide gas. CON TAINERS : 100-lb. polyethylene-lined paper bags, tank cars, tank trucks. Aniline--C(jH5NH2: Pale yellow, oily liquid. Us e: Dyes, intermediates, paints and varnishes. Co n t a in e r s : 55-gal. non-returnable metal drums (450-lb.), tank cars, tank trucks. Caprolactam --(epsilon) --Polymer Grade -- (CH2)6CONH: Available as a white, flaked solid or in molten form. Us e: A high purity monomer for manufac ture of polyamide fibers and plastics and as an intermedi ate in organic syntheses. Co n t ain e r s : Tank cars (molten monomer) and 55-lb. net multiwall paper bags. Cyclohexyiamine (CHA)--Distilled--CBHnNH2: Clear, practically colorless liquid having a characteristic amine odor; a strong organic base stable up to 450F. Us e: Inter mediate for manufacture of rubber chemicals, dyestuffs, synthetic sweeteners, and corrosion inhibitors. Co n t a in e r s : Tank cars and 55-gal. galvanized drums. Cyclotrimethylenetrinitramine (Cyclonite, Hexogen, RDX): Crystalline or granular high explosive. Us e: Shaped charges, "Primacord" and explosive specialty items. Co n t a in e r s : 100-lb. net fiber drums. Dimethyl Terephthalate (DMT) -- H2CGGCC6i-;4CGGCr!s: A high-melting, exceptionally high purity ester of terephthalic acid. Us e: In the manu facture of polyethylene terephthalate, wire enamels and as an intermediate for the synthesis of organic derivatives of terephthalic acid. Co n t a in e r s : 50-lb. polyethylene-lined paper bags, 10-, 50- and 350-lb. polyethylene-lined fiber drums. Diphenylamine (DPA)--Refined--(C6He)2NH: Avail able in a molten state and as a flaked solid. Us e: In manu facture of rubber antioxidants, as an additive for lubri cating oils and greases, as a polyethylene stabilizer against oxidative degradation, phenothiazine, fungicides and in secticides, smokeless powder stabilization, a chemical intermediate in dyes, as an antioxidant and stabilizer for fats, oils, soap, paint, printing ink, glue, and pharmaceuti cals. Co n t a in e r s : 50- and 100-lb. paper bags, 325-lb. fiber drums, 70,000- and 90,000-lb. tank cars. (See also I. & B. Department, Page 63.) "Hitec" Heat Transfer Salt: A eutectic mixture com prised of sodium nitrite (NaN02), sodium nitrate (NaNOs) and potassium nitrate (KNO3). Us e: As a heat transfer medium fer both heating and cooling operations in the range of 300-1,000F., such as maintaining reactor temper ature, high temperature distillation, and preheating of reactants. Co n t a in er s : 150-lb. and 400-lb. fiber drums. Jet Perforators: Explosive charges utilizing the "shaped charge" principle in a variety of sizes. Us e: In perforating cil well casing to permit entry into the well bore of fluids from producing formations. Co n t a in e r s : Fiberboard cases of 200. Lead Azide--PbN5: White to buff, crystal solid when dry. In dry state is a highly sensitive primary detonator. Must be kept wet with water or an ethyl alcohol and water mix ture until used. Us e: In manufacture of detonators. Co n t ain e r s : 150-lb. steel drums. Mild Detonating Fuse (MDF): A small diameter, flexible metal tube containing high'explosive core loadings ranging from 1 to 20 grains per foot. The material, which has detonation velocities in excess of 20,000 feet per second, propagates a detonation from point to point without damage to adjacent equipment. The material has utility for missle applications such as stage separation. CON TAINERS: Various lengths on spools or as custom assemblies having special electrical initiators and primers attached. Mixed Acid--Technical (Nitrating Acid): Mixture of nitric (HNOs) and sulfuric (H2S04) acids. Us e: As a nitrat ing agent in the manufacture of explosives, nitrocellulose, nitroglycerin, dyes, and various organic intermediates. Co n t a in e r s : 700-lb. metal drums, tank cars and tank trucks. Nitric Acid--HNO3: In all concentrations. Clear colorless to light yellow corrosive liquid. Us e: Metallurgy, manu facture of dyes and dye intermediates, etching agent for photoengravers, plastic and synthetic fiber manufacture, manufacture of explosives, general oxidation purposes. Co n t a in e r s : Tank cars and tank trucks. Nitrobenzene--CcHr,N03: Pale yellow liquid. Us e: Inter mediate for manufacture of aniline, azobenzene, rubber chemicals and other organic intermediates. Co n t ain e r s : 55-gal. (500-lb.) metal drums, tank cars and tank trucks. Nitrocellulose--Soluble Types: Cellulose nitrate with variable nitrogen content in a wide range of viscosities. Available wet with butyl, ethyl or isopropyl alcohol and water. Us e: Excellent film-forming material for use in lacquers and other types of finishes; coating for cellophane, paper, fabrics, component of adhesives. Co n t ain e r s : 55-gal. capacity returnable metal drums. Nitroglycerin--Beta Lactose Mixture--C3H6(N03)3: Fine white powder. Available as a trituration of 10% 19 DUP210010812 EXPLOSIVES DEPARTMENT nitroglycerin, 90% beta lactose by weight. Us e: Medicinals. Co n t a in e r s : 10-lb. and 50-lb. polyethylene-lined fiber drums. "Nitrosan" Blowing Agent: Yellow powder comprised of 70% N,N'-dimethyl-N,N'-dinitrosoterephthalamide and 30% white mineral oil. Controlled thermal decomposition liberates nitrogen at 100C. with residue of dimethyl terephthalate. Non-staining, non-discoloring gas generant. Us e: For formation of open-cell or closed-cell polyvinyl chloride in addition to other plastics and elastomers. Co n t ain er s : 5-lb. fiber drums. Pentaerythrite Tetranitrate (PETN): White crystalline powder. Sensitive initiating explosive when dry. Must be kept wet with water or an ethyl alcohol and water mixture until used. Us e: Manufacture of detonators; "Primacord" and explosive specialties. Co n t a in e r s : 55-gal. (280-lb. net) metal drums. "Pyrocore" Igniter Cord: A small diameter, unusually high-velocity igniter cord capable of igniting propellant grains directly or intermediate ignition materials. Also satisfactory for propagating a detonation from point to point with a minimum of damage to adjacent equipment or devices. Available in various sizes and strengths. Co n t a in er s : Various lengths on spools or as special devices having electrical initiators or reception primers. Pyromellitic Acid (PMA)-(HOOC)2CsH2(COOH)2: White powder of 99 + % purity. Aromatic tetrabasic acid, m.p. 257-265C. Undergoes typical reactions of organic carboxylic acids. Us es : Polymer intermediate, raw ma terial for plasticizers, lubricants, and alkyds with high thermal stability. Co n t ain e r s : 5-, 45-, and 175-lb. poly ethylene-lined fiber drums. Pyromellitic Dianhydride (PM DA)--0(C0)2CaH2- (co)2o : White powder of 98 + % anhydride content. Aromatic dianhydride, m.p. 284-286C. Undergoes typical reactions of organic anhydrides. Us es : Polymer inter mediate, crosslinking agent for epoxy resins, raw material for plasticizers, lubricants, and alkyds. Co n t a in e r s : 5-, 25-, and 100-lb. polyethylene-lined fiber drums. "Qualex" Refined Sodium CMC: Low and High Viscosity: A special grade of sodium CMC developed for use as a fluid loss and viscosity control additive in drilling muds. Co n t ain er s : Multi-ply moisture resistant 50-lb. bags. Rivets, Aircraft and Industrial Blind Expansion: Fast acting, strong one-piece fasteners. Available in a wide variety of sizes and alloys. Us e: For "blind" fastening of primary and secondary assemblies partially or totally in accessible from the rear, and in open work. Co n t a in e r s : Fiberboard boxes of 100, 500 and 1,000. Riveting Irons: Us e: Electrical heating tools for expand ing Du Pont Aircraft and Industrial Blind Expansion Rivets. Riveting Iron Tips: Metal tips specifically fashioned for use with Du Pont Riveting Irons. Sheet Explosive EL-506 Series: A pliable sheet of high explosive and binder available in various thicknesses. Us e : Can be used in almost any high explosive application and for such special applications as metal hardening, metal forming, shaped charges or wherever thin layers of a high- velocity Class A explosive are desired. Co n t ain e r s : Fiber boxes. Sodium CMC (Sodium Carhoxymethylcellulose): Dry, free-flowing, light cream to white colored fibrous powder completely soluble in water. Available in technical and refined grsdes, in severs! viscosity tj7pes ^.nd degree of substitution levels. Us e: As a thickening, stabilizing, dis persing, suspending, film-forming agent, and protective colloid in aqueous systems, for soil suspension in detergents, fluid-loss control in drilling muds; strength improvement and surface coating of paper and paperboard; as a textile warp size, laundry size, synthetic tobacco leaf binder, 'ceramics binder, tooth paste thickener, liquid detergent thickener, ice cream stabilizer; in foods, pharmaceuticals, cosmetics, paints, adhesives, textile finishes, and emul sions. Co n t ain e r s : Multi-ply moisture resistant 50-lb. and 75-lb. bags, 51-gal. fiber drums. Sodium Nitrite--U.S.P.--NaN02: Available as a granu lar or pelleted solid, purity 99.5% minimum. Us e: As a corrosion inhibitor in oil storage tanks, domestic fuel oil tanks, oil product pipelines, oil tankers, antifreeze solu tions, diesel engines, wrapping materials, cutting fluids, greases and lubricants, fire extinguishing compounds, re frigerating systems, temporary protective coatings, paints and sea water systems; in heat transfer salt, in azo dye manufacture, in rubber retarders and accelerators, in curing meats, in inhibiting polymer formation and in insecticidal smokes. Co n t ain e r s : 100-lb. paper bags, 150-lb. and 400-lb. fiber drums. Sulfuric Acid--H2S04: Clear colorless to light pink, heavy, oily, corrosive liquid; soluble in water in all pro portions with evolution of heat. Strength: 60 Be.................... 77.67% H2S04 66 Be.................... 93.20% HaS04 Us e: In the manufacture and processing of a wide variety of chemical and industrial products. (See also I. & B. De partment, Page 57.) Terephthalic Acid (TPA) -- Technical -- HOOCCaH jCOOH: Pale yellow crystalline solid. Aromatic diabasic acid, M. P. 425C., insoluble in water and most organic solvents. Undergoes typical reactions of organic carboxylic acids and ring substitution. Useful as polymer intermediate, and as raw material for plasticizers, alkyds with high thermal stability and as a cross-linking agent. Co n t a in e r s : 50-lb. and 300-lb. fiber drums. Trinitrotoluene (TNT)--CrHs06N3: Pale yellow, flaked solid. Us e: As an intermediate in the dye industry, in the manufacture of detonators and explosive specialties; mili tary explosives. Co n t a in e r s : 60-lb. net fiber boxes. "Unicel" ND Blowing Agent: Cream-colored powder containing 40% N-N'-dinitrosopentamethylenetetramine (DNPT) and 60% inert filler. Gas generant which releases nitrogen under controlled heating. Stable up to 180-185C. but can be activated to decompose at lower temperatures. Us e: For incorporation in elastomers or resins as a source of gas for forming cellular or sponge materials in a wide range of densities. Co n t ain e r s : 100-lb. fiber drums. (See also Elastomers Department, Page 3.) 20 DUP210010813 EXPLOSIVES DEPARTMENT "Uitice!" NDX Blowing Agent: Cream-colored solid containing 80% N-N'-dinitrosopentamethylenetetramine and 20% by weight of plasticizer. Has properties similar to "Unicel" ND but provides twice volume of gas per unit weight. Us e: As gas generant in preparation of foamed or cellular elastomers or plastics where the inert filler in "Unicel" ND may be objectionable. SMOKELESS POWDERS Improved Military Rifle Powders: These powders repre sent the latest development in progressive burning nitro cellulose powders, giving higher velocity than the older types within the prescribed limits of pressure. They do not contain nitroglycerin. Co n t a in e r s : 20-lb. metal kegs. I.M.R. No. 3031: For use in sporting rifle ammunition requiring heavy bullets and in military cartridges. I.M.R. No. 4064: For use in military cartridges, most prominent of which, in this country, are those for the 30/06 Springfield Rifle. I.M.R. No. 4198: For use in sporting rifles and with light bullets in military cartridges. I.M.R. No. 4227: For use in sporting rifles and with light bullets in military cartridges. I.M.R. No. 4320: For use in sporting rifles and in military cartridges with limited case capacity. I.M.R. No. 4350: For use in magnum cartridges. PB Smokeless Shotgun Powders: A single base propel lant, designed particularly to be used in light and medium shotshell loads. The powder is very flexible and is noted for its consistency of performance in all makes of shells. It is clean burning and not affected by moisture. Co n t a in e r s : 25-lb. metal drums. Sporting Rifle Powder No. SR-4759: A nitrocellulose powder, especially designed for use in reduced loads in large capacity cartridges, such as the 30/06 Springfield and similar cartridges. This powder is not recommended for use in pistol and revolver cartridges. Co n t a in e r s : 25-lb. metal drums. DUP210010814 FABRICS AND FINISHES DEPARTMENT FABRICS SALES GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT SALES OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 BRANCH OFFICES: Chicago 46, Illinois Detroit 2, Michigan Fairfield, Connecticut Long Island City 1, New York Los Angeles 22, California Newburgh, New York 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 5--238 General Motors Building 48-05 Van Dam Street 2000 South Garfield Avenue ORchard 5-1010 TRinity 5-1990 CLearwater 9-3351 STillwell 6-0200 RAymond 3-8401 JOhn 1-3700 PLANTS: Fairfield, Connecticut Newburgh, New York PRODUCTS VINYL COATED MATERIALS "Fabrilite" Vinyl Coated Fabrics: These materials are made on a wide variety of fabric backs and are coated with selected vinyl compounds engineered for maximum resis tance to flexing and wear. The fabric backing supports the vinyl coating and makes it resistant to ripping, tearing, scuffing and cracking. All "Fabrilite" is water resistant, soap- and water-washable. Made in a wide variety of colors, embossed effects and finishes, "Fabrilite" is available in a range of grades based on the service requirements of the end use. Grades are determined by the weight and con struction of the fabric base and the amount of vinyl applied. Upholstery grades include: Elastic knit fabric back con struction for ease in stretching and tailoring around curves; breathable constructions that promote seating comfort because they permit passage of air through thousands of tiny pores. The following list shows how "Fabrilite" is used by other manufacturers: Automotive: For upholstery and trim, headlining, bind ings and welts, and seat covers Baby Carriages: For upholstery and tops Belts Bicycle Saddles Bookbinding: For looseleaf binders "Fabrilite" in Jeweltone Metallic Colors: Wide range of nontarnishing metallic colors for upholstery and trim, for footwear, for handbags, for wall coverings. "Fabrilite" in Pattina Finish: Unusual reproduction of patent leather for shoes and handbags Folding Door and Partition Enclosures Footwear: For upper stock in certain types of women's shoes and slippers; for quarterlining, sock lining; for platform wrappers and heel coverings. Furniture Upholstery and Household Furnishings 22 Garment: For men's, women's and children's sports jackets Handbags and Pocketbooks Luggage Motion Picture Screens for the Home Sporting Goods Table Pads Wall Coverings "PX" Vinyl Book Cloth: A special grade of vinyl im pregnated washable book cloth, especially engineered for full color decoration by offset lithography. ``Tontine" Flame Resistant Vinyl Drapery Material: Coated fabrics for window shades, for darkening draperies in visual aid schoolrooms, for school stage curtains and cyclorama backgrounds. UNSUPPORTED VINYL MATERIALS "Fabrilite" Unsupported Vinyl Materials: These ma terials are made without a fabric backing from selected vinyl compounds for handbags, pocketbooks, looseleaf binders and notebooks; and in a special grade- for lamina tion to metal for use as a decorative trim on household appliances and metal furniture. PYROXYLIN COATED AND IMPREGNATED MATERIALS "Fabrikoid" Pyroxylin Coated Fabrics: The fabrics are processed with pyroxylin to produce water resistant, soap- and water-washable materials for applications which do not require the resistance to flexing given by vinyl coated fabrics. Bindings and Welts Bookbinding DUP210010815 FABRICS AND FINISHES DEPARTMENT FABRICS SALES "Fahrikoid" Pyroxylin Coated Fabrics (Continued) Card Table Covers Case Coverings Draw Sheet: For newspaper printing presses Footwear: For strapping in certain types of women's shoes and slippers and for sock lining Hat Sweats T 11 i-rrr-'i rfc, T mm CX Paper Machine Aprons: For paper making equipment Table Mats and Pad Coverings Tire Liners: Prevents adhesion to rubber Trimmings: For millinery and costumes "PX" Book Cloth: A special grade of pyroxylin or vinyl impregnated, washable book cloth for bookbindings. "Tontine" Washable Window Shade Cloth: This material is a uniformly woven fabric impregnated and coated on both sides with pyroxylin or vinyl compounds. "Tontine" is available in many colors with range of light transmittancy. Opaque coated cloth and fire resistant grades are also available. CEMENTS "Fairprene" Industrial Cements: These products are made from synthetic rubber compounds for cementing various combinations of cured and uncured "Fairprene" sheet stock (without fabric insert), cured and uncured "Fairprene" coated fabrics, cured and uncured rubber to leather, fabrics, paper, metal and wood. RUBBER COATED, SILICONE COATED AND SYNTHETIC RUBBER COATED MATERIALS "Fairprene" P.A.W. Tape (Protective and Waterstop): A seam sealant engineered for shipbuilding and aircraft use in oil-, air- and water-tight structural joints. "Fairprene" Synthetic Rubber Coated Fabrics: A line of synthetic rubber coated fabrics, including silicone rubber and "Viton" A fluoroelastomer designed for in dustrial applications in the automotive, aviation, gas, chemical, petroleum and marine fields. "Fairprene" coated fabrics have extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for diaphragms, gaskets, washers, packings, seam sealants and curing bags and blankets used in laminating. "Rug Anchor" Rug Underlay: Foam rubber underlay which prevents rugs from slipping. ' SYNTHETIC RUBBER SHEET STOCKS "Fairprene" Synthetic Rubber Sheet Stocks: With out fabric insert; made from synthetic rubber compounds, including silicone rubber and "Viton" A fluoroelastomer for special industrial applications in the automotive, avia tion, gas, chemical, petroleum and marine fields. Has extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for gaskets, washers, pack ings, seam sealants and blankets used in laminating. SYNTHETIC RESIN COATED FABRICS, LAMINATES AND FELTS "Armalon" TFE-Fluorocarbon Fiber Felt: An in dustrial felt made in various thicknesses, either as porous material or impregnated with tetrafluoroethylene resin. The impregnated product is used as a gasketing material on equipment handling corrosive materials. The plain felt is used as a filter material, particularly for corrosive prod ucts. The TFE-Fluorocarbon resin provides a maximum degree of temperature and chemical resistance. "Armalon" TFE-Fluorocarbon Resin Coated Glass Fabrics, Tapes and Laminates: For electrical insulation; for antistick and antifriction conveyor belts and covers for heat sealing units in the food and packaging industries, for industrial diaphragms and gaskets requiring unusual resistance to chemicals and to high and low temperatures. "Lecton" Acrylic Resin Coated Fabrics and Lami nates: Glass fabrics coated with "Lecton" acrylic resin and laminates made from these coated fabrics. Offered as an electrical insulating material, these fabrics have ex cellent thermal stability at Class B temperatures (130C.) and can be used for extended periods up to 150C. They are essentially unaffected by "Freon" fluorinated hydrocarbons. 23 DUP210010816 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION AUTOMOTIVE FINISHES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware EXPORT OFFICE: Nemours Building Wilmington 98, Delaware AUTO MANUFACTURERS1 SALES OFFICES: Detroit 2, Michigan Los Angeles 22, California 5-238 General Motors Building 2000 South Garfield Avenue COLOR ADVISORY SERVICE: Detroit 2, Michigan 5-238 General Motors Building PLANTS: Chicago 14, Illinois Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo 1, Ohio Tucker, Georgia ' 2100 Elston Avenue 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 TELEPHONE PRospect 4-1000 PRospect 4-1000 TRinity 5-1990 RAymond 3-8401 TRinity 5-1990 PRODUCTS Cements: Automotive Gasket: Prepared in .heavy varnish or pigmented paste form; applicable by brush. Us e: For cementing gaskets in place on automotive motors to increase production efficiency. Co n t a in e r s : 1- and S-gal. cans, 53-gal. drums. Special Cements: A wide range of adhesives for bonding various substances by modifying applications and curing methods. Co n t ain e r s : 1- and 5-gal. cans,-53-gal. drums. Clears: Bronzing Liquid (Lacquer or Alkyd Type): Lacquer type is air-dry; alkyd type is air-dry or bake. Us e: Vehicle for aluminum or bronze powders for protection and decoration of certain automobile small parts. CON TAINERS: Qt., 1- and 5-gal. pails, 53-gal. drums. Metal (Alkyd Type): Exterior or interior synthetic varnish. Us e: Over imitation grain or decals, or over bright chrome plated parts. Co n t a in er s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Lacquer Type): Pyroxylin base clear. Us e: For interiors over simulated wood grain or decals. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Methacrylate Type): Methacrylate base clear. Us e : Protection of bright chrome plated parts, exterior exposure, dip or spray application. Co n t a in e r s : Qt., 1and 5-gal. cans, 53-gal. drums. Metal (Methacrylate Modified Lacquer Type): Mixed pyroxylin-methacrylate base clear. Us e; Pro tective coating for exterior of bright aluminum panels on buses. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Modified Alkyd Type): Synthetic clears. Us e: For interiors over simulated grain on car interior metal trim for application by electrostatic spray. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Phenolic Spar Type): Exterior or interior varnishes. Us e: Over simulated wood grain or decals. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Alkyd Type): Clear synthetic varnish. Us e: Wood station wagons. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Lacquer Type): Modified pyroxylin base. Us e: Interior wood trim of custom built cars. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Phenolic Spar Type): Oil modified, phenolic spar varnish. Us e: Wood station wagons. Co n t ain e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood Sealer (Alkyd or Phenolic Type): Oil modified alkyd or phenolic with or without toxic component which retards fungus growth. Us e: Applied by dip to wood station wagon dimensional pieces or truck body parts to seal wood pores and prevent moisture absorption. Co n Ta in er s : 5-gal. pails, 53-gal. drums. ' j , j ! : I 1 DUP210010817 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Finishes Compounds: "Duco" Polishing or Rubbing Compound: A polish ing material in paste form, designed for machine appli cation or hand rubbing. Us e: For final polishing of "Duco" lacquers to smooth surface and to bring up full gloss. Co n t a in e r s : 1- and 5-gal. cans. Shielding Compound: A pigmented semipaste, having nondrying vehicle. Us e: Masking parts of surface while another color is being applied. Used with "Duco" finishes only. Co n t a in e r s : 1- and 5-gal. cans. "Dulux" Foam Resin: Polyester resin, specific for use with isocyanates .to produce flexible polyurethane foams. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Enamels: Chassis Black: An air-dry, black, pigmented enamel; applicable by brush or spray with an oil, asphalt, pyroxylin or synthetic type base. Us e: On automobile chassis for protection and decoration. Co n t a in e r s : 1and 5-gal. cans, 53-gal. drums, tank' wagons, tank cars. "Dulux" Enamels: Baking and air-dry, clear and pig mented enamels based on a synthetic type vehicle; ap plicable by spray--manual, machine or electrostatic. Us e: Finishing of steel and wood automobile bodies, sheet metal parts, wheels, etc. CONTAINERS: Pt., qt., 1and 5-gal. cans, 53-gal. drums, tank wagons. Engenamel: (See Page 31). Fender: A black, oil or synthetic resin modified asphaltum type enamel applied by dipping and baking at high temperature. Us e : Fender and miscellaneous parts finish applied over rubber first coat. Co n t a in e r s : 5-gal. cans, 53-gal. drums, tank wagons, tank cars. Gas Tank: A pigmented, black enamel based on an oil semi alkyd or full alkyd type vehicle; applicable by spray or flow coating; air-dried or force-dried at temperatures up to 250F. Us e: Exterior finish of terne plate automo bile gasoline tanks. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums, tank wagons. Motor: Air-dry, pigmented, colored enamels; applicable by spray; available in an oil, synthetic or pyroxylin type base. Us e: On automobile motors. Co n t a in e r s : 1- and _ 5-gal. cans, 53-gal. drums. Small Parts Dip: Pigmented, black or colored enamels based on semi alkyd or full alkyd vehicles to bake 250 to 350F. Us e: Automobile small parts. Co n t ain e r s : 1- and 5-gal. cans, 53-gal, drums. sheet metal parts, etc. Co n t ain e r s : Pt., qt., 1- and 5gal. cans, 53-gal. drums. "Duco" Metalli-Chrome Lacquers: Metallic finishes producing unusual color, effects of great durability. Ap plicable by spray only. Us e: Finishing of automobile bodies and sheet metal parts. Co n t a in e r s : Pt., qt., 1and 5-gal. cans, 53-gal. drums. "Duco" Striping Lacquers: Air-dry, pigmented, colored lacquers; applicable by brush. Us e: For striping automobile bodies and wheels and touch-up work. Co n t a in e r s : Pt., qt., 1- and 5-gal. cans. "Lucite" Acrylic Lacquers: Air-dry pigmented colored lacquers on acrylic resin base; applicable by spray only, but possessing much greater durability to exposure than "Duco" lacquers. Us e: Finishing of steel automobile bodies and sheet metal parts. Co n t ain er s : Pt., qt., 1and 5-gal. cans, 53-gal. drums. Primers: Black Dipping Primer (Baking, Pigmented, Oil or Alkyd Type): Unusual stability in large dip tanks. Us e: Dipping fenders, hoods and miscellaneous small parts. Base coat for "Duco" or "Lucite" lacquers or "Dulux" enamels. Co n t a in e r s : 1- and 5-gal. cans, 53gal. drums, tank wagons, tank cars. Flash Primer (One-Bake Type): Baking, pigmented, colored, liquid paints on a synthetic base; applicable by spray. Us e : Applied to steel automobile bodies and followed immediately by surfacer or baking enamel without drying period between coats. CONTAINERS: 1and 5-gal. cans, 53-gal. drums. Metal (Oil Type): Air-dry and baking, pigmented, colored, liquid paints with oil base; applicable by spray. USE: On automobile bodies and sheet metal parts to give adhesion between the metal and succeeding coats. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Metal (Pyroxylin Type): Air-dry, pigmented, colored, liquid paints on a pyroxylin base; applicable by spray. Us e: For touch-up work only on automobile bodies and only under lacquer. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Metal (Synthetic Type): Air-dry and baking, pig mented, colored, liquid paints with synthetic base; appli cable by spray or brush. Us e: On automobile bodies and sheet metal parts to give adhesion between the metal and succeeding coats. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Lacquers: Dip: Air-dry, pigmented, colored or clear lacquers on a special modified pyroxylin base; applicable by dip. Us e: On instrument panels, molding, interior decoration, etc. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. "Duco" Lacquers: Air-dry, pigmented, colored lac quers on a special modified pyroxylin base; applicable by spray only. Us e: Finishing of steel automobile bodies, Wood: A special low pigmented type primer applicable by brush or spray. Us e: On wood commercial automobile bodies. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Wood Sealer: Clear or pigmented, synthetic or oil type, air-dry, penetrating sealer with or without toxic in gredient to retard growth of fungi; applicable by dip, brush, spray or flow. Us e: On wood before other finish to seal pores and prevent failure by moisture absorption. . Co n t a in e r s : X- and 5-gal. cans, 53-gal. drums. 25 DUP210010818 FABRICS AND FINISHES DEPARTMENT Primer-Surfacers: "Preparakote" Primer-Surfacers: Air-dry or baking, highly pigmented, liquid paints on a special synthetic base; applicable by spray or brush. Us e: On steel auto mobile and commercial car bodies, preparatory to finish ing with either "Duco" or "Dulux" finishes. CONTAIN ERS: 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Baking Type): Highly pigmented, liquid paints of the baking type on an oil or semi alkyd base; applicable by spray. Us e: On steel automobile and commercial car bodies, preparatory to finishing with either "Duco", "Lucite" or "Dulux" finishes. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Non-Sanding Type): Medium pig mented, modified alkyd base, for use under "Duco" or "Dulux" finishes. Material must be baked. When used under "Dulux" it can be flashed and the baking ac complished simultaneously with the baking of the top coat. Us e: On steel automobile and commercial car bodies, preparatory to finishing with "Duco" or "Dulux" finishes. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Pyroxylin Type): Highly pig mented, lacquer type primer-surfacers. Us e: Spot repair ing of car finish under lacquer or synthetic topcoats. Co n t ain er s : 1- and 5-gal. cans, 53-gal. drums. Putties: "Duco" Putties: Air-dry, highly pigmented, paste materials; very fast drying; applied by glazing to fill metal imperfections. Us e: On automobile bodies pre paratory to finishing with either "Duco", "Lucite" or "Dulux" finishes. Co n t ain e r s : 1- and 5-gal. cans. "Dulux" Paste Filler: Alkyd pastes for filling pores in wood of station wagons or interior wood trim of custom FINISHES DIVISION: Automotive Finishes built cars or filling pinhole pores in glass fiber reinforced polyester panels or parts preparatory to finishing with clear, surfacing material, or color. Co n t a in e r s : 5-gal. cans, 30-gal. drums. "Dulux" Putties: Air-dry, highly pigmented, paste materials; minimum shrinkage; applied by glazing to fill metal imperfections. Us e: Preparatory to finishing with either "Duco" or "Dulux" finishes. Co n t a in e r s : 3^-, 1- and 5-gal. cans. Oil Base Putties: Air-dry, highly pigmented, paste materials on oil base; applied by glazing to fill in dentations in metal which are too deep for the surfacer to fill. Us e : On automobile bodies over primer. Co n t ain er s : 1- and 5-gal. cans. Retarders: Slow evaporating, high boiling "Duco" or "Lucite" solvents. Us e: Added to "Duco" or "Lucite" thinner to improve leveling and/or to prevent blushing in humid weather. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Sealers: Automotive bleederseal sealer for bleeding colors. For use over and under both lacquer and synthetic enamel type finishes to prevent discoloration of the topcoat if underneath color tends to bleed. Co n t a in e r s : Qt. and gal. cans. Surfacers: Air-dry and baking, highly pigmented products on oil, pyroxylin and synthetic types of bases; applicable by spraying over primer to give a satisfactory smooth surface when sanded, preparatory to "Duco" or "Dulux" finishes, or other final finish applications. Us e ; On auto mobile bodies and sheet metal parts. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Thinners: Clear, liquid solvents. Us e : For the reduction of primers, surfacers, lacquers and enamels to proper working consistency. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums, tank wagons, tank cars. 26 DUP210010819 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials AUTOMOTIVE REFiNISHING MATERIALS GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Philadelphia (Wynnewood), Pa. San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 308 East Lancaster Avenue 1600 Trousdale Drive, Burlingame SYcamore 4-9581 ORchard 5-1010 MAin 1-8516 FLeetwood 7-4611 TRinity 8-2700 OXford 7-3870 SERVICE WAREHOUSES: Atlanta 18, Georgia Baltimore 18, Maryland Birmingham 3, Alabama Boston 54, Massachusetts Buffalo 25, New York Charlotte 3, North Carolina Chicago 47, Illinois Cleveland 14, Ohio Columbus 12, Ohio Dallas 21, Texas ' Denver 1, Colorado Detroit 34, Michigan Houston 11, Texas Indianapolis 4, Indiana Jacksonville 1, Florida Kansas City 41, Missouri Long Island City I, New York Los Angeles 22, California Memphis 3, Tennessee Milwaukee 21, Wisconsin Minneapolis 4, Minnesota New Orleans 25, Louisiana Newark, New Jersey Oakland 6, California Oklahoma City 2, Oklahoma Philadelphia 24, Pennsylvania Pittsburgh 5, Pennsylvania Portland 2, Oregon St. Louis 10, Missouri Salt Lake City 4, Utah San Francisco, California PLANTS: Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo 1, Ohio Tucker, Georgia 1737 Ellsworth Industrial Drive, N. W. 400 East Twenty-Ninth Street 2301 Fifth Avenue, South 75 Fourth Avenue, Waltham 1696 Walden Avenue 2500 South Boulevard 2560 North Elston Avenue 3137 Chester Avenue 1450 Dublin Road 8510 Ambassador Row 555 Quivas Street 19930 Conner Avenue 332 South Wayside Drive 1825 West Eighteenth Street 2256 Dennis Street 6015 Manchester Trafficway 48-05 Van Dam Street 2000 South Garfield Avenue 1573 Union Avenue 2601 North Third Street 1401 South Fourth Street 4401 Euphrosine Street 15 Stern Avenue, Springfield 1020 East Eighth Street 201 East Hill Street 4242 Whitaker Avenue 2222 Noblestown Road 5510 Southeast McLoughlin Boulevard 2300 Hampton Avenue 990 South Sixth Street, West Post Office Box 927, South San Francisco . 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 SYcamore 4-9581 BElmont 5-0278 FAirfax 2-8775 TWinbrook 3-2550 KEystone 7979 JAckson 3-5094 BRunswick 8-2050 MAin 1-8516 HUdson 6-7191 FLeetwood 7-4611 AComa 2-8945 FOrest 6-8800 WAlnut 3-2546 MElrose 8-5591 ELgin 3-7461 EMerson 3-1390 STillwell 6-0200 RAymond 3-8401 BRoadway 6-4746 COncord 4-6872 FEderal 2-0558 AUdubon 6658 DRexel 6-5151 HIgate 4-1980 JAckson 5-2194 GArfield 6-3701 WAlnut 1-9190 BElmont 2-6177 Mission 7-0800 EMpire 4-3582 JUno 3-0733 DUP210010820 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials PROD UCTS Aluminum Cleaner: A cleaner and brightener for new and weathered aluminum, Also for cleaning aluminum surfaces on which clear coatings or "Dulux" or other alkyd resin enamel systems are to be supplied. Co n t a in er s : Qt. and gal. bottles. Aluminum Paint: Ready mixed; varnish type products; chrome aluminum and aluminum for interior and tops of truck bodies; motors of passenger cars and commercial vehicles; tractors, farm equipment, road machinery, etc. Spray or brush. Co n t ain e r s : Qt. and gal. cans. Aluminum "Duco" Lacquer: Ready-to-mix, for spray application over recommended undercoats, dries to dull sheen for rubbing and polishing. Packaged in double compartment cans, aluminum paste in top and vehicle in bottom. Co n t a in e r s : Qt. and gal. cans. coating over "Dulux" type decalcomanias, lettering or other decorations; a slow size with large decalcomanias; a protective coating over stained and filled wood surfaces. Co n t a in e r s : Qt., 1- and 5-gal. cans. "Dulux" Enamel Reducers: Used to reduce the viscosity of "Dulux" enamels and other alkyd resin products. Co n t ain e r s : Qt. and gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. "Dulux" Enamels: Metallic and nonmetallic lines of alkyd resin type colors, blacks and whites for spray appli cation and nonmetallic colors, blacks and whites for brush ing. Us e : To finish or refinish automobiles, trucks and all types of commercial vehicles over recommended under coats. Co n t a in e r s : Qt., 1- and 5-gal. cans. Aluminum "Dulux" Enamel: Ready-to-mix high brilli ancy aluminum for spray or brush application and ready mixed smudge resistant aluminum for spray application over recommended undercoats on commercial vehicles and other exterior uses. Ready-to-mix packaged in double compartment cans. Co n t ain e r s : Qt. and gal. cans. Chassis Blacks: Varnish type products, gloss and flat; gasoline and non-gasoline proof for refinishing chassis. Co n t a in e r s : 1- and 5-gal. cans, 16- and 55-gal. drums. Clear Gloss Lacquer: A nitrocellulose type clear for garnish mouldings, instrument panels and other parts of the interior of automobiles; also mixed with aluminum or bronze powders for striping. Co n t ain er s : Qt., gal. and 5-gal. cans; 16- and 55-gal. drums. Clear Metal Lacquer: A nitrocellulose type clear for interior use as a protective coating for aluminum, alumi num alloys and other non-ferrous metals. Co n t a in er s : Qt., 1- and 5-gal. cans; 16- and 55-gal. drums. Clear Wood Primer: A synthetic type primer for priming porous surfaces, such as wood, composition panels, etc. before application of "Preparakote" Primer-Surfacers. Co n t a in er s : Qt. and gal. cans. "Duco" Lacquers: Metalli-chrome, metallic and non metallic lines of lacquer colors, blacks and whites for spray application over recommended undercoats. Us e : For finish ing or refinishing automobiles. Co n t a in er s : Pt., qt. and gal. cans. "Duco" Mixing and Tinting Colors: Pigmented lacquer colors for intermixing in conjunction with the Blending Machine for "Duco" lacquers. Require addition of clears before using. Also for use in tinting ready mixed "Duco" colors. Us e: For finishing or refinishing automobiles. Co n t a in e r s : Qt. and gal. cans. "Dulux" Clear--Exterior: A synthetic type clear for use on automotive vehicles as a clear coating over or mixed with "Dulux" enamel colors to increase gloss; a protective "Dulux" Mixing Enamels: Pigmented synthetic prod ucts for intermixing in conjunction with the Blending Machine for "Dulux" enamels. Require addition of an additive before using. Us e: To finish or refinish auto mobiles, trucks and all types of commercial vehicles over recommended undercoats. Co n t a in e r s : Qt. and gal. carls. Fish Eye Eliminator: An additive for "Duco" and "Lucite" lacquers and "Dulux" enamels, designed to eliminate craters in these finishes when applied on surfaces previously waxed or polished with silicone products. Co n t a in er s : Boxes of 50 capsules, each of 0.486 gm. and 4-oz. plastic dispenser. Force-dry and Anti-Wrinkle Agent: An additive for use with "Dulux" air-dry enamel colors in very hot weather or when subjected to force drying to prevent wrinkling. Co n t a in er s : 1- and 5-gal. cans. Furniture Finishes: "Duco" sealers, clear and pigmented lacquers, stains and wood fillers for refinishing wood furniture; interior use only. Co n t a in e r s : Qt., 1- and 5-gal. cans; 16- and 55-gal. drums for sealers and lacquers. Inside Body Gray Enamel: A varnish type enamel. Us e : For the inside of truck bodies. Co n t a in e r s : Qt., 1- and 5-gal. cans. Lacquer Thinners: Used for thinning nitrocellulose and acrylic lacquer type products to spraying consistency. Co n t a in er s : 1- and 5-gal. cans; 16-, 30- and 55-gal. drums. "Lucite" Acrylic Lacquer: Metallic and nonmetallic lines of acrylic lacquer colors, blacks and whites for spot and panel repair and overall refinishing on automobiles factory finished in "Lucite", "Magic Mirror" and other acrylic lacquers. Co n t ain er s : Pt. and qt. cans. Masking Compound: A strippable compound for mask ing off glass areas and smooth plated metal parts of auto mobiles prior to painting. Not recommended for appli cation over plastic decorations or parts, rubber or any painted surfaces. Co n t ain er s : Qt. and gal. cans. DUP210010821 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials IVietal Conditioner: An acidic, pre-finishing cleaner and conditioner for ferrous metals and aluminum, designed to remove rust and corrosion, etc., and to etch the metals for improved adhesion of finishing systems. Co n t a in e r s : Qt. and gal. bottles. Motor Enamel: A gray, varnish type enamel. Us e: For refinishing automobile and truck engines. Not suitable for r'nM'TA T-VTfDC? Of- Paint Remover: A heavy-bodied, water-washable, non flammable product for removing all types of finishes, including baked enamels, lacquers and varnishes, from automobiles, commercial vehicles, aircraft, appliances, and other metal surfaces. Co n t a in er s : Qt. and gal. cans. "Pyralux" Fluorescent Enamels, Clear and Reducer: A lacquer type, high visibility fluorescent enamel for safety and identification marking of commercial vehicles, aircraft and other vehicles. Also for sign work and advertising pur poses. Co n t a in er s : Qt. and gal. cans. Primers and Primer-Surfacers: Lacquer Type Primer-Surfacers: Lacquer type un dercoats for use in touch-up and in building up repaired metal areas on automobile bodies to a smooth surface prior to application of subsequent finishing coats. Co n t a in e r s : Qt., 1- and 5-gal. cans, 16- and 55-gal. drums. Non-Sanding Primer: Quick drying synthetic type primers for use under "Dulux" enamel or other synthetic enamel topcoats only. For body steel, aluminum and alloys of aluminum or old finish when no surfacing is required. Us e : For finishing automobile and truck bodies; applied by spray. Co n t ain e r s : Qt., 1- and 5-gal. cans. "Preparakote" Primer-Surfacers: Quick drying syn thetic type piimer-surfacers for use under "Duco" and "Dulux" finishes. Fill and can be sanded. Us e: For finishing or refinishing automobile and truck bodies. Co n t a in e r s : Qt. and gal. cans. Spangled Galvanized Primer: A synthetic type primer for use in priming spangled galvanized iron and certain coated metal surfaces. Co n t a in e r s : Double compartment qt. and gal. cans. Zinc Chromate Primer: For use in priming inside of aluminum sheets on truck bodies to prevent corrosion caused by moisture. Also used for pre-priming contacting areas of aluminum with dissimilar metals to prevent rapid corrosion resulting from electrolysis. Co n t a in e r s : Qt., 1- and 5-gal. cans. Putties; Lacquer-type "Speed Glaze" glazing and "Dulux" synthetic glazing and hard putties for filling imperfections on surfaces of automobile and truck bodies. Co n t a in e r s : 1-lb. tubes, qt. and gal. cans. Refrigerator Finishes: "Duco" lacquer and "Dulux" enamel finishes. For touch-up or over-all refinishing of ex teriors of refrigerator cabinets, kitchen cabinets, washing machines, home, farm and commercial freezers. Co n t ain e r s : Qt. and gal. cans. Retarder Thinner for "Duco" and "Lucite" Lac quers: Slow drying thinners to be added to "Duco" and "Lucite" lacquer topcoats for blush resistance and to im prove gloss. Co n t a in e r s : Qt., 1- and 5-gal. cans. "Rubbertone" Rubber Finish: A black finish for re newing appearance of rubber running boards, mats, tires, etc. Co n t a in e r s : Qt. and gal. cans. Rubbing Compounds: Mediums for producing gloss on "Duco" lacquers. Us e: In automobile refinishing. Co n t a in e r s : Qt., 1- and 5-gal. cans. Sealers: Automotive Bleederseal Sealer for Bleeding Colors: For use over and under both lacquer and synthetic type finishes to prevent discoloration of the topcoat, if under neath color tends to bleed. Co n t ain er s : Qt. and gal. cans. Hi-Speed Lacquer-Type Automotive Refinish Sealer: Used in recommended acrylic lacquer systems to prevent sandscratch swelling, improves color hold-out and gloss. Also suitable for use over original nitrocellulose lacquer and baked enamel finishes when followed by nitrocellulose lacquer topcoats. Co n t a in e r s : Qt. and gal. cans. Make-Ready Ready-to-Spray Primer-Sealers: For use as a touch-up primer on bare metal spots under either lacquer or synthetic enamel topcoats. Also for use as a sealer over lacquer undercoats, lacquer finishes, and aged synthetic enamel finishes to prevent "sinking in" of topcoats and as a color ground coat. Co n t a in e r s : Qt. and gal. cans. Solvents: Gun and Equipment Cleaner: An effective solvent for cleaning spray guns and other equipment. Co n t a in er s : 1-gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. Lacquer Removing Solvent: For use in partially feather-edging damaged areas on lacquer finished auto mobiles prior to refinishing; also for quick removal of lacquer finishes down to original factory undercoats. Co n t a in e r s : Qt., gal. cans and 5-gal. pails. "Prep-Sol" Solvent: A safe solvent for cleaning old finishes of "Lucite", "Duco" lacquers, "Dulux" or synthetic enamels prior to sanding and refinishing with "Lucite", "Duco" or "Dulux" finishes. Co n t a in er s : Qt., 1- and 5-gal', pails, i6-, 30- and 55-gal. drums. Tractor and Implement Enamels: Pigmented semi alkyd products. Us e : To refinish tractors, farm equipment, road machinery, etc. Co n t ain e r s : Qt. and gal. cans. 1J 29 DUP210010822 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes i. INDUSTRIAL FINISHES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Chicago 46, Illinois 1737 Ellsworth Industrial Drive N. W. 7250 North Cicero Avenue, Lincolnwood SYcamore 4-9581 (Chicago Calls) INdependence 3-7250; (Others) ORchard 5-1010 i; Cleveland 14, Ohio _ 3133 Chester Avenue MAin 1-8516 1 Philadelphia (Wynnewood), Pennsylvania 308 East Lancaster Avenue San Francisco, California 1600 Trousdale Drive, Burlingame TRinity 8-2700 OXford 7-3870 PLANTS: , Chicago 14, Illinois 2100 Elston Avenue Everett 49, Massachusetts 59 Waters Avenue i5: Flint 2, Michigan Fort Madison, Iowa Hamilton Avenue and St. John Street Post Office Box 319 l Parlin, New Jersey Philadelphia 46, Pennsylvania 3500 Grays Ferry Avenue South San Francisco, California 160 South Linden Avenue--Post Office Box 608 Toledo 1, Ohio 1930 Tremainsville Road--Post Office Box 953 Tucker, Georgia Post Office Box 487 | :1ji!; | PRODUCTS Acid and Fume Resisting Paints: A line of several grades and colors for maintenance use on wood and steel surfaces exposed to acid and alkali fumes. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. Adhesives: (See Cements). Airplane Dopes and Finishes: Airplane dopes for use in coating fabric surfaces. Airplane finishes, including under coats and topcoat finishes, for use on wood and metal surfaces. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Aluminum Mixing Vehicles: Oil base and synthetic resin base varnishes to be mixed with aluminum powder or paste for use on wood or metal. Co n t a in e r s : 1- and 5gal. cans, 55-gal. drums. Aluminum Paints: Oil base and synthetic resin base ready mixed and ready-to-mix aluminum paints for use on exterior and interior wood and metal surfaces. CONTAIN ERS: 1- and 5-gal. cans. Aluminum Powder and Paste: Various grades for use in vehicles and bronzing liquids. Co n t a in e r s : 1-, 2- and 10-lb. cans, 50- and 100-lb. drums. Asphaitums, Air-Drying Types: Black enamels for application to metal. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Bronzing Liquids: Of various types including pyroxylin base, oil base and synthetic resin base; used as vehicles for the application of aluminum powder, aluminum paste and bronze powder. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Budium" Polybutadiene Can Coatings: (See Tin Decorating Finishes, Page 32). Cements: Beit Cements: Pyroxylin base cements used in the manufacture of leather belts requiring resistance to the effects of moisture. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Hot Melt Bookbinding Adhesives: Synthetic resin adhesives, solvent free, applied in melted form for book binding purposes, principally binding together paper of books, magazines, catalogs, etc., and adhering of outside covers to magazines, catalogs, etc. Co n t a in e r s : Metal containers holding solid pack of 50 and 95 lbs. Household Cement (Waterproof Cement): A pyrox ylin base cement having a wide utility in the repair, of articles made of wood, glass, ivory, leather, pearl or cloth. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. Pyroxylin Cements: Pyroxylin base cements for use in cementing plastic facings to wooden heels by manu facturers of women's shoes. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Special Cements: A wide range of adhesives for an extended field of specialized uses pertaining to the prob lems of bonding various substances including "Mylar" polyester film and involving many modifications of various application and curing methods. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Thermoplastic Cements: Used for cementing or lami nating various surfaces, such as metal foils, cloth, glass and sheets of metal that require the application of heat and pressure. These cements are applied to the surfaces and after thorough drying are ready for the necessary heat and pressure treatment required. Co n t ain e r s : 1and 5-gal. cans, 55-gal. drums. 30 DUP210010823 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes Driers: Compounds used to accelerate the oxidation of a finish which contains drying oils. Co n t a in e r s : 1- and 5-gal. cans, 55-gal, drums. "Duco" Furniture Lacquer, Clear and Flat: Used for finishing wood furniture. Co n t ain er s : 5-gal. cans, 55-gal. drums. "Duco" Furniture Lacquer Sealers: (See Furniture Lacquer Sealers). "Duco" Lacquer Enamels: Pyroxylin base enamels furnished in a wide range of colors and types for satisfying the finishing requirements of numerous industries. Applied directly to a surface or over undercoats, depending on the finish needed. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Duco" Lacquer Metalli-Chrome Enamels: Metallic finishes producing unusual color effects of great durability. Applicable by spray only. Us e: Finishing of sheet metal parts. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. "Duco" Lacquer Penetrating Primers: Clear primers used in place of a sealer particularly in furniture finishing to give a high degree of scratch resistance. Co n t a in e r s : 5-gal. cans, 55-gal. drums. "Du-Lite" Wood Bleach System: A chemical treatment employed to bleach wood to light colors. "Dulux" Clear Exterior Finish: Synthetic resin base clears made in various formulations for different types of requirements and characterized by unusual flexibility and durability. Applicable either directly to a surface or as a topcoat over enamels for decorative and protective values. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Dulux" Enamel and Paint Type Pigmented Fin ishes: Synthetic resin base enamels and paints furnished in a wide range of colors of various specific types to meet the finishing requirements of numerous industries. Applied directly to a surface or over undercoats, depending on the finish needed. Furnished in both air-drying and baking types. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Dulux" Wood Finish, Clear and Flat: Synthetic resin base clears for furniture finishing. The film must be cured by baking. Applied over a sealer. Co n t ain e r s : 5-gal. cans, 55-gal. drums. Enamels: (Also see Asphaltums, `'Duco", "Dulux", "Flintflex", "Lucite" and Engenamel). Pigmented finishes available in various colors and in various types, such as pyroxylin base enamels, oil base enamels and synthetic resin base enamels. Available in air-drying and baking types. Applicable either directly to a surface or over under coats, depending on the nature of the finish required. Applied by spraying, brushing, dipping or roller coating for protective and decorative purposes. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Engenamel: A red enamel (pyroxylin base) used as a sealer coat for crankcases, transmission cases, gear cases, etc., of gasoline motors. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Fillers: Metal: A heavy paste type of filler used over under coats to smooth out imperfections in the metal. Co n t a in e r s : 5-gal. cans, 30-gal. drums. Wood: Available in paste or liquid form. Used for filling pores in wood as part of the preparation of surface for subsequent application of varnishes or lacquers. CON TAINERS: 5-gal. cans, 30-gal. drums. "Flintflex" Enamels: Enamel finishes of the synthetic resin type, employing "Dulux" resins but designed for interior use only. Available in air-dry and baking types. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Foil Lacquers: Clear and colored lacquers for roller coat ing application to aluminum foil. The clear may be tinted with alcohol soluble dyes. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Formvar Wire Enamels: (See Wire Enamels, Page 33). Furniture Finishes for Wood: (See Furniture Lacquer Sealers, "Duco" and "Dulux" Furniture Clears and Flats). Also all color components, stains, fillers, wash coats, toners, etc. as well as bleaching components (See "Du-Lite" Wood Bleach). Furniture Lacquer Sealers: Furniture Lacquer Sealers are used as a-preliminary coating which is processed with sandpaper and which is then followed by the required number of furniture lacquer topcoats. "Duco" Furniture Lacquer Sealers are similar in composi tion to clear and flat "Duco" Furniture Lacquers but are modified to permit easy sanding with conventional sand paper. Co n t a in e r s : 5-gal. cans, 55-gal. drums. "Tufcote" Furniture Lacquer Sealers differ from "Duco" Furniture Lacquer Sealers in that the former are modified to permit sanding with a special grade of sandpaper particularly suited for use with them. "Tufcote" Furniture Lacquer Sealers return better results than "Duco" Furni ture Lacquer Sealers with respect to film properties of toughness, scratch resistance and clarity. Co n t a in er s : 5-gal. cans, 55-gal. drums. Implement Finishes: For application by brush, dip or spray to various types of agricultural implements. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Insulating Varnishes: Used to waterproof and improve the dielectric properties of fabric covered electrical wires and cables. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Lacquers: (See Airplane Finishes, Bronzing Liquids, "Duco" Lacquers, Metal Lacquers and Paper Lacquers). "Lecton" Acrylic Resin Wire Enamels: (See Wire Enamels, Page 33). "Lucite" Acrylic Lacquers for Industrial Use: Air drying pigmented colored lacquers on acrylic resin base possessing much greater durability to exterior exposure than "Duco" Lacquer. Metal Lacquers: Clear pyroxylin base lacquers used as finishes direct to metal, as primers on metal for enamel coats and as topcoats over pyroxylin enamels. CONTAIN ERS: 1- and 5-gal. cans, 55-gal. drums. Methacrylate Clear Finishes: Clear solutions of acrylic resin for use over noncorrosive metals. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. 31 DUP210010824 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes "NFL" Wood Stains: (See Stains, Wood, this page). Refrigerator Finishes: A complete line of "Dulux" high Nylon Wire Enamel: (See Wire Enamels, Page 33). Paints: Pigmented finishes, available in various colors and bake primers, and "Dulux" and "Lucite" high bake enamels for use on metal refrigerators. Co n t a in e r s : 5-gal. cans, 55-gal. drums, tank trucks (by special arrangement). in both oil base and synthetic resin base types; applicable by brush or 3pray either directly to surfaces or over suitable primers, depending on the nature of the finish required and surfaces to be coated. These products include metal protective paints, prepared paints for wood, flat wall paints Retarders: Exceptionally slow drying thinners, used with pyroxylin base lacquers or enamels, to retard speed of drying and for prevention of blushing. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. and a wide variety of special paints for miscellaneous purposes. Many interior paints are available on an odorless basis. (See Trade Sales Finishes). Sign Finishes: A complete line of finishes, including undercoats, "Dulux" sign enamels, "Dulux" stencil paste and "Dulux" clear sign finishes. For use on silk screen stencil; press printed, gum printed and lithographed metal signs. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Paper Lacquers: Stains, Wood: Used under lacquer and varnish to in i Gloss Lacquers: For use on overprint label stock, tensify and produce various grain effects on wood. Available parchment, supercalendered clay coated papers, vul in ready-for-use form involving choice of pigmented, oil 1 canized fiber and dense paperboard to obtain a high gloss and scuff resistance. Co n t a in e r s : 1- and 5-gal. soluble, water soluble and spirit soluble stains. Co n t ain er s : 5-gal. cans, 55-gal. drums. Also water soluble stains cans, 55-gal. drums. available in dry powder form in 5-lb. cans. Grease and Oil Resistant Lacquers: For use on parchment, glassine, kraft and dense papers to provide Stencil Paste: (See Sign Finishes). grease and oil resistance. Co n t a in e r s : 1- and 5-gal. Strippable Coatings: For various purposes such as coat cans, 55-gal. drums. ing spray booths, conveyor belts, etc., to catch and remove I I Heat Resistant Lacquers: For use on paper plates or other stock where a degree of heat resistance is needed. overspray. Also strippable coatings for temporary pro tection of idle equipment. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Surfacers: Various general types, including pyroxylin Heat Sealing Lacquers: For use on glassine, parch ment and dense papers where heat sealing only is re quired. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. base, oil base and synthetic resin base; used as a second or intermediate coat in a finishing system. Co n t ain er s : 1 - and 5-gal. cans, 55-gal. drums. Moistureproof Heat Sealing Lacquers: For use on glassine, parchment and dense papers where both moistureproofness and heat sealing are required. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Moistureproof Lacquers: For use on glassine, parch ment, vulcanized fiber and dense papers where moistureproofness only is required. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Paste: (See Colors in Oil, Fillers, and Stencil Paste). Primers: Various general types, including pyroxylin base, oil base and synthetic resin base; used as the first or prim ing coat in a finishing system. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. Putties: Oil base, synthetic resin and pyroxylin base putties, both of the hard type and glazing type. For use in finishing where the surface imperfections are too pro nounced to permit obtaining a smooth surface by the use of primer and surfacer coats. Co n t a in e r s : 1-, 5-, 10- and 22-lb. cans. Pyroxylin base putties also available in 1-lb. tubes. Pyroxylin Solutions: Mixtures of nitrocellulose and solvents made up in various combinations as lacquer bases; also made up in combinations according to customers' specifications. Railway Finishes: A complete line of exterior and in terior finishes for passenger train cars, locomotives, freight cars, stations, signal equipment, bridges, tractors and trucks. "Teflon" TFE-FIuorocarbon Resin Finishes: Special finishes which must be cured by high fusing temperatures. They have outstanding corrosion resistance, high heat stability and anti-sticking properties. Co n t a in e r s :'l-.pt., 1-qt. and 1-gal. glass containers. "Teflon" TFE-FIuorocarbon Resin Wire Enamels: (See Wire Enamels, Page 33.) Thinners: Appropriate combinations of solvents and diluents, used for the purpose of reducing the viscosity or consistency of finishes. Special grades available for various types of pyroxylin base, oil base and synthetic resin base finishes. Certain thinners used for pyroxylin base finishes may also be used to remove pyroxylin films and grease from surfaces which are to be refinished. (Also see Re tarders, this page.) Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Tin Decorating Finishes: Varnishes and enamels, both oil base and synthetic resin base, including "Budium" polybutadiene finish for application to tin plate which, after baking, is formed in dies to produce various types of metal containers. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Undercoats: (See Primers and Surfacers). Varnishes: Clear finishes for application by brush, dip or spray; made from drying oils combined with natural resins or synthetic resins for application to various surfaces for the deposition of films which serve to protect or enhance the appearance of surfaces. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. DUP210010825 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes Washing Machine Finishes: A complete line of "Dulux" high bake primers and "Dulux" and "Lucite" high bake enamels for use-on metal washing machines. Co n t ain er s : 5-gal. cans, 5S-gal. drums. Waterproof Cement: (See Cements, Page 30). Wiping Stains: Fast drying pigment wiping stains. (See Stains, Wood). Wire Enamels: Coatings which on baking give enamel like appearance; used for application to electrical wire for the purpose of providing insulation. CONTAINERS: 53-gal. drums, tank cars. DUP210010826 FABRICS AND FINISHES DEPARTMENT f FINISHES DIVISION: Specialties Sales SPECIALTIES SALES i GENERAL OFFICE: DuPont Building Wilmington 98, Delaware t el eph o n e: PRospect 4.-1000 1 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware k PLANTS AND WAREHOUSES (Combined): i PRospect 4-1000 Columbia, Tennessee (Sponges) EVergreen 8-5632 Flint 2, Michigan (Chemicals and Sponges) Hamilton Avenue and St. John Street CEdar 2-1104 1 WAREHOUSES: l: Los Angeles 22, California 2000 South Garfield Avenue RAymond 3-8401 ? Oakland, California (Auto and H. H. Sponges) 1020 East 8th Street HIgate 4-1980 * Portland, Oregon 5510 S. E. McLaughlin Boulevard BElmont 6-1139 * | "7" AUTOMOTIVE SPECIALTIES PRODUCTS Acid and Rust inhibitor: A patented, economical chemi cal inhibitor for automotive cooling systems to help keep them rust free. It dissolves quickly, prevents rust from forming and neutralizes acids. Not recommended for sys tems with aluminum components. Mixes readily with all standard type anti-freezes. Co n t ain e r s : 814 oz. Bug Remover: A cleaning powder for removing bug residue from car finishes and chromium. Contains "Duponol" surface active agent in combination with other ingredients. Reacts quickly on the bugs without harming the car finish. Can also be used for cleaning windshields and headlights. Co n t ain e r s : 8 oz., 1 lb. All Purpose Sealer: Seals leaks in auto windshields and rear windows. Also for sealing leaks in garden hose, water pails, gas tanks, gaskets, plumbing fixtures, radiator hoses, hot water tanks, laundry tubs, rubber footwear, small boats, rain spouts, and metal containers. Co n t a in e r s : 1%-fL oz. tubes. Anti-Rust and Water Pump Lubricant (Liquid): Helps prevent both electrolytic and chemical corrosion in cooling system. Lubricates water pump--eliminates squeaks. Works in plain water or any standard anti-freeze solutions. Harmless to all parts of cooling system, in cluding aluminum. Just pour liquid into radiator. One pint is sufficient for a cooling system holding 22 quarts or less. Recommended for passenger cars, trucks, tractors, buses. Co n t a in e r s : 12 oz. Auto Wax: An easy polishing paste wax for auto finishes. Produces a brilliant, durable luster and protects the finish from dirt, moisture and ultraviolet rays of the sun. Co n t a in e r s : 7 oz. and 1 lb. Brake Fluid, Heavy Duty: A very high quality brake fluid that meets or surpasses rigid S.A.E. specifications and Federal Specification VVH-910. Us e: In all automotive hydraulic brake systems under severe or moderate operat ing conditions. Co n t ain er s : 12 oz., 1 qt., 1- and S-gal. cans, 30- and 54-gal. drums. Brake Fluid, Super Heavy Duty: A super heavy duty brake fluid formula which meets or exceeds Super Heavy Duty Specification SAE 70R3 and Heavy Duty Specifica tion SAE 70R1 and Federal Specification VVH-910. Us e: In all automotive hydraulic brake systems under severe operating conditions. Co n t a in e r s : ' 12-oz., 1-qt., 1- and 5-gal. cans, 30- and 54-gal. drums. Car Soap: An economically priced car washing detergent for shop use. Concentrated formula will not streak. Co n t a in e r : 75 lb. Car Wash: A soapless detergent which, when, dissolved in water, makes car washing easy. Removes dirt and grease quickly and safely. Makes drying unnecessary. Easy on the hands and car finish. Co n t ain e r s : \4 oz., M, 4, 16 and 60 lb. Cellulose Sponge: (See Household Specialties and Marine Specialties, Page 36. Chrome and Metal Polish: A speedy cleaner, polish and rust remover for chrome plated bumpers and other auto fittings. Polishes nickel, brass, copper and stainless steel. Produces a brilliant luster. Also recommended for home and shop uses. Co n t ain e r s : 12 oz. Clear Rubber Dressing: Makes black, white or colored rubber look like new. Does not soak in, easy to'use, tack free. Mixes with equal parts of water. Excellent for colored floor mats. Clear Windshield Sealer: A clear, waterproof cement for stopping leaks at windshields- and rear window frames. Dries quickly and adheres firmly to glass, metal and rubber, making a tight, permanent, waterproof seal. Co n t a in e r s : 1%-fl. oz. tubes. . Coaling System Cleanser: A heavy duty, acid type cleanser which cleans badly clogged radiators by actually dissolving rust, scale and grease withou? injury to hose packings or gaskets. Not recommended for use in systems with aluminum components. Does not require reverse flushing. Co n t a in er s : Lb. DUP210010827 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Specialties Sales Cooling System Sealer: Stops and prevents leaks in automotive radiators and cooling systems quickly, without clogging the passages. Harmless to hose and metal parts. Mixes readily with all standard types of anti-freeze. CON TAINERS: 12 oz. "Dissolvo" (Solvent) Tar and Road Oil Remover: A safe solvent for removing tar, road oil, old wax, Spray Glaze and silicone automobile polishes. Safe for all auto mobile finishes. Co n t ain e r s : 12 oz., 1 gal. "Duco" Cement: A transparent, flexible, waterproof ad hesive used in the manufacture or repair of articles made of wood, glass, china, metal, ivory, leather, paper or fabrics. Patented applicator tip keeps cement off fingers, permits application to small areas. Co n t ain e r s : %-fl. oz. tubes, oz. tubes (12 to display carton). Fast Flush: A maintenance-type liquid radiator cleaner designed for routine use in spring and fall to maintain maximum cooling system efficiency. Safely disperses grease, rust and scale in 10 to 30 minutes. Requires no neutralizer, just flushing with water. Will not harm rubber or metal cooling system parts. Co n t a in er s : Pt. Foam Cleaner: A liquid concentrate, to be diluted with water and the foam used for cleaning carpets, rugs and upholstery. Cleans both flat weave and pile fabrics. Gives them a fresh, new look. Is safe and easy to use. The diluted liquid is also an excellent paint and woodwork cleaner. Co n t a in e r s : Pt. Gas Guard: A premium grade fuel system anti-freeze which prevents ice forming in the gasoline lines of cars, trucks and tractors. Eliminates stalling and sputtering caused by the presence of water in the gasoline. Con tributes to quicker starting and smoother engine perform ance, even in subzero weather. One pint every 1,000 miles will give adequate protection. Co n t ain e r s : 12 oz. Glass and All-Purpose Cleaner: An economical, con centrated cleaning fluid that cuts grease and grime efficiently and safely. Cleans vinyl automobile upholstery, wind shields, walls, woodwork, gas pumps, soft drink coolers, and other glass, metal or painted surfaces. Will not smear, leaves no film, economical to use. Co n t ain e r s : Qt., gal. "Glow" Liquid Car Wash: For those who prefer a liquid car wash. Removes dirt, oil, grease but not existing wax on finish. Will not streak, dries without wiping. Heavy Duty Stop-Leak: For repairing cracked cylinders, engine blocks and water jackets in cars, trucks, buses and tractors. Will not harm hose or metal parts nor clog the system. Also recommended as a heavy duty stop-leak. Mixes readily with all standard type anti-freeze solutions. Co n t a in er s : Pt. "Jet Clene": A cleaner for car upholstery--vinyl, plastic, "Fabrilite", plastic coated fabrics and leather. Also ex cellent for cleaning spots from all household upholstery, textiles and rugs. Co n t ain er s : 12 oz. aerosol. Liquid Tire Black: A ready mixed, black dressing for automobile tires, rubber mats and running boards. Dries quickly to a satin finish. Co n t ain e r s : Pt. M.O.A. -- Motor Oil Additive: A crankcase lubricating oil additive effective in reducing oil consumption and in reducing the formation of sludge formed during "stop and go" driving. Co n t ain e r s : 15 oz. cans, 5 gal., 30 gal. drums. New Car Wax: A triple-action paste wax especially formu lated for use on new cars and those with finishes in ex cellent condition. Cleans with an "easy on the finish" cleansing action. Waxes with a hard, solid paste wax that protects. Glazes with a brilliant, durable weatherproof coating. CONTAINERS: 8 oz., 1J4 lb. "Orel" Rubber Lubricant: Harmless to rubber, yet effectually penetrates and lubricates rubber shackles and all rubber parts. Co n t a in e r s : Gal. "Pro-Tek" Protective Hand Cream: A greaseless cream which, when rubbed on the hands and arms, protects against paint, lacquer, grime, grease, thinner and many chemicals. It washes off easily and takes the dirt with it. Co n t a in e r s : 8'o z., 1 and 5 gal. Rubber Dressing: A black liquid concentrate for thinning with eight parts or more of lead-free gasoline to make an excellent tire dressing. For use by service stations and re treading shops on tires, rubber mats and running boards. Co n t a in e r s : Qt., gal. "7" Polish: An excellent cleaner and polish for all car finishes--new or old. Rubbed on; when dry it is wiped off with a clean cloth. This removes all dirt and chalked pig ment, restoring original color and luster. Co n t a in e r s : Pt., qt., gal. "7" Rubbing Compound: A strong, abrasive cleaner for removing scratches and blemishes from auto finishes. Excellent for cleaning severely weathered finishes before waxing. Can be used for rubbing down newly sprayed finishes. Produces a smooth surface easily and quickly. Co n t ain e r s : 12 oz., 1 qt., 1 gal. "Shield": A new formula developed to shield the beauty of all car finishes, especially the new acrylic lacquer and improved enamels used by major car manufacturers. "Shield" can be applied to a new car four days after the car has been painted in manufacture. It sets up a hard "repellent shield" between the car finish and dulling dirt, traffic film--actually improves scratch resistance of new car finishes. One application of "Shield" lasts for months. Car can be washed sparkling clean, quickly and easily. Grime does not stick. Co n t a in e r s : 1 pt. "Slipspray": An all-purpose, dry lubricant for use in the home, shop or office. "Slipspray" is stainless, odorless, wax less and colorless. Contains no oil or silicone. Makes every thing slide easier and work better--drawers, locks, windows, doors, screens, zippers, etc. May be applied to any surface --paint, car finishes, rubber, glass, plastic, leather and fabrics. Not affected by water, oil or solvents--will not flush off, freeze or melt. Co n t ain e r s : 8 oz. aerosol. Speedy Cleaner: A liquid cleaner for all auto finishes. Removes chalked pigment, traffic film, wax, Spray Glaze and silicone polishes quickly and safely. Especially recom mended for use before applying wax. Co n t a in e r s : Pt., gal. Spot Remover (Dry Clean): A nonflammable cleaning fluid, leaves no odor and does not shrink fabrics; recom mended for all colorfast garments, gloves, draperies, up holstery and fine fabrics; removes grease, wax, fresh paint, gum, adhesive tape and road tar. Co n t a in e r s : 8 o z., 1 gal. 35 DUP210010828 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Specialties Sales Spray Glaze: A beauty treatment for automobiles, "Combo" Synthetic Sponge: Multi-purpose, two sided designed for use in a shop or service station. It produces a sponge that scrubs and scours on one side, absorbs and higher luster and has greater durability than waxes, yet wipes on the other. Special abrasive, nonscratching poly requires less time and labor to apply. After the car finish urethane side does the scrubbing--conventional cellulose is cleaned in the usual way, simply spray on Spray Glaze side performs normal wiping function. and wipe it off. This leaves a dry, brilliant shine without 8. further polishing. Co n t a in e r s : Gal. Cellulose Sponge Cloth: Extra-soft, lintless and absor Spray Glaze Cleaner No. 1: A heavy duty cleaning com bent when wet. Has exclusive built-in fiber reinforcement pound designed for use by hand before applying Spray for longer wear Us e: All-purpose household size for dish Glaze. Removes traffic film, chalked pigment and old wax washing, woodwork, windows, etc. A Commercial size is quickly and safely. Suitable for all car finishes--new or old, offered in the sanitary supply trade, for industrial-institu lacquer or synthetic enamel. Co n t a in e r s : Gal. tional cleaning. Automotive Specialties sells larger size to i Spray Glaze Cleaner No. 2: Formulated primarily for automotive and hardware trades. I. use with electric polishing machines before applying Spray Cellulose Sponge Yarn: Cotton yarn core covered with I Glaze, hut may be used by hand on new cars and others cellulose sponge. Wound on ball multiple-end warps and 1 whose finish is in excellent condition. Suitable for both single-end spools. Available in in- (buff or green) and i standard and feeder type machines. Co n t ain e r s : Gal. in. (green only) diameters. Us e: For converter use in Waterless Hand Cleaner: A solvent type cleaner that removes dirt, grease, grime, paints, oils, carbon, tar and manufacture of household and industrial wet mops, and for weaving into cloths, pads, coaster mats, etc. shellac. Contains lanolin to help prevent skin irritation. Co n t a in e r s : 8 oz., 28 oz., 5 lb. "7 SEAS" MARINE PRODUCTS White Polishing Compound: A moderately strong cleaner for removing heavy traffic film and chalked paint pigment from the car finish. Can be used on all colors and all types of car paints. Excellent for removing scratches and stains. Co n t ain er s : 12 oz., 1 qt. and 1 gal. All-Purpose Sealer: Seals leaks in boat windshields and windows. Also for sealing leaks in water lines, gas tanks, gaskets, small boats, and metal containers. Co n t a in e r s : 1% fluid oz. tubes. White Wail Tire Cleaner: Cleans white wall tires easily, safely and economically. Co n t a in e r s : Pt., gal. Windshield Washer Solvent: A concentrated detergent anti-freeze solution for year-round use in windshield washers. Guards against solution freezing in winter and aids in removing bugs, grease and dirt during summer driving. Co n t ain e r s : 6 oz. 2-4-1: An economical cleaner and polish for all car finishes. Quickly and easily cleans dull and oxidized paint leaving a sparkling clean surface. Co n t a in e r s : Pt. HOUSEHOLD SPECIALTIES PRODUCTS Cellulose Sponge: Highly absorbent, soft and resilient when wet, long-lasting. It will not scratch, can be sterilized by boiling, not affected by ordinary cleaning compounds. Fine and coarse pore types are available. Us e: Com mercially for many purposes, such as washing walls and painted surfaces, windows, etc.; in the home; for washing dishes, general cleaning and in the bath. a v ail a bl e f o r ms : Convenient sizes in the regular buff shade for general cleaning purposes and in various pastel shades for use in the home. Also cut to specified sizes for converters, or specialized industrial uses. Standard size, packaged sponges are sold through brokers and agents to grocery, drug, variety store, sanitary supply outlets. Automotive Specialties sells to automo tive and hardware trades. (See above). Fine pore packaged sponges for photographic use are sold by Photo Products Department (See Page 90), Special sizes for converters and industrial users are also sold by Household Specialties. "Turtleback" Car Washing Sponge: A sponge particu larly designed for use in washing automobiles and trucks. Bilge Cleaner: A fast, easy, effective agent for removing oil, grease, and scum from boat bilges. DuPont Bilge Cleaner will homogenize these contaminants with the water to be pumped overboard through the bilge pump. Leaves bilge fresh and clean. Reduces possible fire hazard. Also handy for removing water-line scum and oily accumu lations on engine blocks and other surfaces. Co n t a in e r s : 12 oz. Block-Moisture and Corrosion Control: An easy to apply aerosol liquid spray, Block deposits an invisible, long-lasting anti-corrosion film on any surface. It dries wet electrical and ignition systems by creeping under the moisture and displacing it. Wet engines start in a jiffy. Stops shorting and static interference due to moisture in radio and electrical equipment. An excellent penetrating lubricant, too, for loosening corroded fittings. Co n t ain er s ; 8 oz. Boat Bottom Cleaner: Cleans algae and scurn from boat bottoms quickly. Especially effective in salt water areas for removal of grass growth from fiberglass hulls and out board lower units. In fresh water areas it provides an easy means of removing river scum. Co n t ain er s : Pint and 1 gal. cans. Boat Polish: An easy-to-use polish and cleaner for fiber glass, painted, and/or varnished boat surfaces. Rubbed on; when dry it is wiped off with a clean cloth to remove all dirt and chalked pigment, providing a highly polished boat finish. Co n t a in e r s : Pt. Boat Soap: An all-purpose, highly-concentrated liquid detergent for fast, easy, cleaning above and below decks. Only one to two teaspoonfuls needed in each gallon of water. Hulls, decks, bulkheads, bright work, dishes . . . everything washable on board can be made sparkling clean with this product. Removes oil stains and scum. Works DUP210010829 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Specialties Sales equally well in fresh, salt, hard or soft water. Won't streak. Co n t a in e r s : 12 oz. Boat Wax: A combination paste wax formulated for use on all boat finishes. A mild cleaning agent incorporated in the wax helps remove any minor finish oxidation and surface scum. The tough, durable, carnauba wax provides a brilliant luster while protecting the surface with a dura ble, weatherproof coating. Co n t a in er s : 8 oz. Engine Cleaner and Degreaser: A liquid concentrate which may be sprayed on engines and parts for removing oil and grease accumulations. Engines may be cleaned by spraying the material on, allowing to stand for a few minutes, then hosing off with water. When used on in boards, the residue may be pumped overboard through the bilge pump. On outboards, merely hose off with water. Bulk sizes also available for cleaning engine and boat parts. Excellent for cleaning outboards prior to winter storage. Co n t a in er s : 16 oz. aerosol, 1-, 5-, 30- and 55-gal. cans. Heavy Duty Fiberglas Cleaner: A strong, abrasive cleaner for cleaning severely weathered Fiberglas finishes before polishing or waxing. Prepares a surface for polishing or waxing, easily and quickly. Also excellent for oxidized paint finishes. Co n t a in e r s : 12 oz. Perk Marine Oil Additive: A marine crankcase oil addi tive that reduces engine wear, cuts costly repairs, saves oil and promotes smoother running of marine engines. It pre vents harmful sludge and keeps engines clean. Works well with all motor oils. To maintain new engine performance, use with every oil change. Co n t a in er s : 15 oz. Plastic Windshield Cleaner: An excellent cleaner and polish for all plastic windshields and windows. Quickly removes dirt, scum and light surface scratches. Co n t ain e r s : 8 oz. Scratch Remover: Formulated especially for removing deep scratches from plastic windshields and windows. Co n t a in e r s : 2 oz. "Slipspray" All-Purpose Dry Lubricant: A totally dif ferent kind of lubricant. Sprays clean, stays clean--dries instantly. Makes everything slide easier--works on any surface. Odorless, colorless, stainless. Will not leave greasy or oily film. Retards corrosion on battery terminals, tools, electrical connections. Co n t a in e r s : 6 oz. aerosol. Snug Canvas Water Repellent: An excellent water repellent dressing for boat covers, boat awnings, tarpaulins, and all heavy cloth boating accessories. Snug repels water and helps preserve canvas. Improves weather resistance. Will not stiffen, shrink or discolor fabrics. May be applied with brush, swab or spray. Long-lasting. Co n t a in e r s : Qt. and Gal. Show Boat Metal Polish: Removes rust stains and gives a brilliant luster to marine metal trim quickly--easily. For use on all metals, including chrome, brass, copper, nickel, stainless steel and anodized aluminum. Keeps bright metals sparkling. Co n t a in e r s : 12 oz. Spark Marine Fuel Additive: A marine fuel additive that inhibits gum formation in fuel tanks, lines and car buretors. Spark Marine Fuel Additive also absorbs water in gasoline and diesel fuels caused by condensation. Assists quick starting, helps maintain full pep and power, keeps engines running smoothly. For diesel and gasoline powered inboards and outboard engines. Co n t a in e r s : 6 oz. out board size, and 12 oz. inboard size. MARINE SPONGE PRODUCTS "Captain's Combo" Synthetic Sponge: Multi-purpose, two-sided sponge that scrubs and scours on one side, absorbs and wipes on the other. Special abrasive, non scratching polyurethane half does the scrubbing--conven tional cellulose half performs normal wiping functions. Deckhand Sponge: A big, husky sponge that is excellent for cleaning large topside areas. It also doubles as a bailer. Galley Sponge: An all-purpose cleanup sponge that has thousands of uses on any boat. Specially shaped for use in the galley. Easy to grip--easy to use. Giant Deckhand: A giant size sponge for giant size jobs on board boat. Especially useful for large bailing jobs. Seaturtle: An exclusive DuPont Sponge. The flat side washes, the curved side has a skinlike backing that is excellent for wiping and drying. Handy for many cleaning jobs around the boat. Cellulose Sponge Cloth: This reinforced cellulose sponge cloth, a new DuPont discovery, makes boat washing a snap. It washes like a cloth, absorbs water like a sponge, and wipes like a chamois. Made of versatile cellulose, it's molded on a center screen of tough fibers for extra strength, durability, and tear resistance. Soft to the touch, it's self cleaning, rinses fresh and clean, and leaves no lint. Super Scooper Sponge: Especially shaped to bail boats fast and easy. Squeezes dry with light pressure--bounces back ready for more. \V :, 37 DUP210010830 a FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes TRADE SALES FINISHES GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 58, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Boston (Waltham) 54, Massachusetts Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Detroit 2, Michigan Kansas City 41, Missouri Philadelphia (Wynnewood), Pa, San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 45 Fourth Avenue 7250 North Cicero Avenue, Lincolnwood 1 (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 5-238 General Motors Building 6001 Manchester Trafficway 308 East Lancaster Avenue 1600 Trousdale Drive, Burlingame SYcamore 4-9581 TWinbrook 9-8300 ORchard 5-1010 MAin 1-8516 FLeetwood 7-4611 TRinity 5-1990 EMerson 3-1390 TRinity 8-2700 OXford 7-3870 PLANTS AND WAREHOUSES (COMBINED): Chicago 14, Illinois Everett 49, Massachusetts Fort Madison, Iowa Philadelphia 46, Pennsylvania South San Francisco, California Tucker, Georgia 2100 Elston Avenue 59 Waters Avenue Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 Post Office Box 487 WAREHOUSES: Albany 5, New York Amarillo, Texas Atlanta 18, Georgia Baltimore 18, Maryland Bangor, Maine Birmingham 3, Alabama Buffalo 25, New York Canton 2, Ohio Charlotte 3, North Carolina Chicago 31, Illinois Cincinnati 3, Ohio Cleveland 14, Ohio Columbus 12, Ohio Dallas 21, Texas Davenport, Iowa Denver 2, Colorado Detroit 34, Michigan Fresno 1, California Hartford 10, Connecticut Houston 11, Texas Indianapolis 7, Indiana Jacksonville 1, Florida Kansas City 41, Missouri Knoxville 17, Tennessee Long Island City 1, New York Los Angeles 22, California Louisville 16, Kentucky Memphis 4, Tennessee Miami, Florida Milwaukee, Wisconsin Minneapolis 4, Minnesota Nashville 3, Tennessee New Orleans 25, Louisiana Oklahoma City 5, Oklahoma Pennsauken, New Jersey 38 116 Railroad Avenue 900 South Georgia Street 1737 Ellsworth Industrial Drive, N. W. 400 East Twenty-Ninth Street 109 Hildreth Street 2301 Fifth Avenue, South 1696 Walden Avenue 205 Reynolds Place, S. W. 2500 South Boulevard 7327 West Agatite Avenue, Norridge 3001-17 Vine Street 3137 Chester Avenue 1450 Dublin Road 8510 Ambassador Row 1528-30 West Locust Street 555 Quivas Street 19930 Conner Avenue 1133 Belmont Ave. 635 New Park Avenue, West Hartford 332 South Wayside Drive 1825 West Eighteenth Street 2256 Dennis Street 6015 Manchester Trafficway 510 Williams Street 48-05 Van Dam Street 2000 South Garfield Avenue 3927 Park Drive, Shively 1573 Union Avenue 1730 N. W. 23rd Street 5200 North 124th Street 4317 Excelsior Boulevard 1406 Broad Street 4401 Euphrosine Street 208 East Hill Street 7300 Crescent Boulevard ALbany 2-5711 DRalre 3-2631 SYcamore 4-9581 TUxedo g-6053 BAngor 2-0554 FAirfax 2-8775 KEystone 8242 GLendale 2-9830 EDison 2-3177 NAtional 5-7650 UNiversity 1-3414 MAin 1-8516 Hudson 6-7193 FLeetwood 7-4611 DAvenport 2-2861 AComa 2-8945 FOrest 6-2245 ADams 7-4474 ADams 3-8297 WAlnut 3-2521 MElrose 8-5593 ELgin 3-7461 EMerson 3-1390 STillwell 6-0200 RAymond 3-8401 EMerson 8-1659 BRoadway 6-2745 NEwton 3-9815 HOpkins 3-0260 WAlnut 7-9797 ALpine 5-8486 AUdubon 6658 JAckson 5-2194 NOrmandy 5-2720 DUP210010831 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes REHOUSES (Continued): Pittsburgh 5; Pennsylvania Portland 3, Maine Portland 2, Oregon Providence 3, Rhode Island Roanoke 5, Virginia Rochester 13, New York SacrarneiiLu, Califuinia Saginaw, Michigan Salt Lake City 4, Utah Seattle 9, Washington Spokane 2, Washington Springfield 4, Massachusetts Springfield, New Jersey Springfield, Pennsylvania St. Louis 10, Missouri Syracuse, New York Tampa 2, Florida Toledo 10, Ohio Youngstown 3, Ohio 2222 Noblestown Road 255 Forest Avenue 5510 Southeast McLoughlin Boulevard 217 Broad Street 2710 Franklin Road, S. W. 95 La Grange Avenue TAj''--1 --. --r\nA UV U1X,VU1U UI1U AfU-Vi V VA* Qf-raof WW.WWW 2506 Weiss Road 990 South Sixth Street, West 525 Boren Avenue, North East 1035 Cataldo Avenue 233 Page Street 15 Stem Avenue 730 Baltimore Pike 2300 Hampton Avenue Bridge Street, East 304 South Franklin Street 330 West Central Avenue 3203 Southern Boulevard TELEPHONE WAlnut 1-7000 SPruce 2-4657 BElmont 6-1139 GAspee 1-2709 Diamond 2-3176 GLenwood 3-2580 GLadstone 1-1074 SWift 2-0822 EMpire 4-3582 MAin 2-4165 HUdson 3-8111 REpublic 2-6216 DRexel 6-6070 KIngswood 3-2126 Mission 7-0208 GRanite 2-0451 TAmpa 2-2414 CHerry 1-2197 STerling 8-9688 PRODUCTS The following products are available in a wide variety of package sizes. Details on sizes available by each item can readily be determined by contacting any of the above listed locations. ALUMINUM PAINTS Aluminum Paint--Ready Mixed: A smooth flowing, brilliant aluminum finish for general interior and exterior use. Resin Base: Soya, chinawood, petroleum resin. Us e: Masonry, brick, concrete, cement, metal roofs, structural steel, as a sealer for knots and sap streaks in wood. "Dulux" All-Purpose Aluminum Paint Ready Mixed: A brilliant aluminum finish of unusual durability for ex terior and interior use. Us e: Masonry, wood, brick, con crete, cement, metal roofs, structural steel, tanks and galvanized metal surfaces which have been properly primed. Heat Resistant Aluminum Paint Ready Mixed: A brilliant aluminum finish. Us e: Exterior and interior use on hot surfaces; will withstand continuous temperatures up to 400F. exterior; 800F. interior. Hi-Hcat Resistant Aluminum Paint: A brilliant, dura ble, smooth flowing ready-to-mix aluminum finish for use on hot metal surfaces. Resin Base: Silicone resin. Us e: Stacks, breechings, boiler fronts and other metal surfaces subjected to heat of 400F. to 600F. exterior; 400F. to 900F. interior. Phenolic Aluminum Paint--Ready-to-Mix: Resin Base: Linseed oil, phenolic resin. Us e : Exterior and interior surfaces where resistance to moisture and mild acid fumes is required. CHEMICAL RESISTANT FINISHES Corrosion resistant finishes are available to protect prop erty from chemical attack in all phases of industry. When and where such conditions prevail, it is advisable to have our representative investigate the individual problem and write the painting specifications. Such inquiries are wel come and will receive prompt attention. Typical of specialized products in this field are vinyls, phenolics, epoxies, elastomers, etc. Acid and Fume Resistant Paints: Made especially for resisting the corrosive action of acid fumes, spill of weak acids. Resin Base: Chinawood, phenolic resin. Us e: In terior or exterior where the abnormal conditions described exist. Chemical Resistant Coatings: Available in primer, in termediate and various colored topcoats. Resin Base: Vinyl resin. Us e: For interior and exterior use where ex treme resistance to abnormal chemical exposure is required. "Dulux" Fume Resistant Yellow: For use in place of Safety Color Code High-Visibility Yellow in chemical plants. Resistant to discoloration from hydrogen sulfide and fading in add or alkaline atmospheres. Epoxy Chemical Resistant Finishes: Resin Base Polya mide catalyzed epoxy resins. Us e: Exterior and interior surfaces exposed to chemical fumes and occasional splashes. COLOR CONDITIONING A proved practical plan for the use of color, developed by DuPont paint technicians working in collaboration with lighting and color specialists. Color Conditioning makes scientific use of color to im prove seeing conditions and increase efficiency in industrial plants, stores, hospitals, schools, offices and all types of public buildings. Color Conditioning eliminates glare, reduces eyestrain and fatigue, makes color and light work together. Color Conditioning insures the selection of the right color for all interior surfaces. It has been tried and proved under actual operating conditions. Three Dimensional Seeing, apart of Color Conditioning, embodies the principles of applying focal colors to machine tools to provide maximum visibility at the critical seeing area and the right color to the body of the machine, re sulting in improved production, fewer seconds or rejects. 39 if DUP210010832 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes and reduction in accidents. Safety Color Code, a part of Color Conditioning, comprises a uniform system of colors for identifying industrial hazards, thus contributing to industrial safety. Color Conditioning Interior Flat Wall Enamel: A Eat wall finish with easy working properties which dries to a fine-textured finish. Odorless formula means no pungent solvent odor during application. Excellent hiding, easy lapping, fast application. Acts as its own sealer over many surfaces. Dries overnight to a matte finish that can be easily washed. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "Dulux" Color Conditioning Interior Gloss Enamel: Especially developed shades in full enamel finish; dries with a hard surface; highly resistant to marring; durable; washable. Odorless formula. Resin Base: Soya-linseedalkyd resin. Us e: Especially suited for use on dadoes, trim, cabinets, and similar surfaces in homes, factories, schools, institutions where unusual durability is required. "Dulux" Color Conditioning Interior Semi-Gloss Enamel: A new "Dulux" semi-gloss finish for walls, ceilings, woodwork, cabinets in residential and commercial buildings. Easy application, excellent hiding and self-level ing. An extra-hard, durable finish that withstands repeated washing. Odorless formula. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls, ceilings and trim. "Dulux" Color Conditioning Machinery Enamel: A hard drying enamel for use on machinery and equipment, both indoors and out. Excellent resistance to chipping, grease and oil. Fast drying, extremely tough and durable. The colors in this line are those generally used by industry to carry out the principles of Three Dimensional Seeing. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior: metal and wood surfaces; stationary and mobile machinery, plant equipment, pipe lines, etc.; farm and road machinery, vehicles, tools. "Dulux" Color Conditioning Safety Color Code En amels: These finishes make possible a system of color identification to promote safety. A high gloss durable finish for any type of surface--inside and out. Approved by the National Safety Council and American Standards Associ ation. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior: metal, wood and masonry. Farm and road machinery, vehicles, tools. CUSTOM COLOR SYSTEM The Custom Color System affords the professional and amateur decorator a choice of hundreds of odorless Custom Colors for interior painting. Universal Tinting Colors in tubes are added to Blending Bases to provide matching colors in Flat Enamel, Semi-Gloss Enamel, Gloss Enamel and "Flow Kote" Rubber Base Wall Paint. Universal Tinting Colors can also be added to 42 Chalk Resistant White House Paint; "Dulux" Stucco, Shake and Shingle Paint Tinting White, and "Dulux" Trim and Shutter White to arrive at specific durable exterior colors. With the Custom Color System, the dealer has a choice of two methods of dispensing colorants: (1) Various size tubes of Universal Tinting Colors which are hand-squeezed into desired bases; (2) Universal Tinting Colors machinedispensed through the DuPont Color Master mixing machine. "DUCO" FINISHES "Duco" Gloss Enamel: Quick drying enamel with dura bility, good flow, excellent hiding power. Dries to handle in a few hours. Odorless formula. Resin Base: Soya-linseedalkyd resin. Us e: Finishing furniture, indoors and out. Interior woodwork and walls, especially in kitchens and baths. Lawn furniture. "Duco" Satin Sheen Enamel: Our highest quality semi-gloss enamel; high-hiding, quick-drying, easy brush ing, smooth flowing; washable, durable. Formulated with odorless solvents. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls, ceilings, trim and furniture, where a satin-like sheen is desired. "Duco" Spray Magic Enamel: "Duco" Enamel in an aerosol can, white and colors. Handy, push-button spray application especially useful for appliances, tools, radiators, furniture, screens, and bicycles. Quick drying; hard, glossy finish. Us e: Clean wood or metal surfaces, interior and exterior. ENAMELS AND UNDERCOATS Alkali Resistant Enamel: A medium glos3, chlorinated rubber base paint to serve as priming and finishing coats on surfaces subjected to abnormal exposure to alkali and moisture. Us e: Unfinished interior cement and concrete floors and other interior unpainted masonry surfaces where alkaline conditions may develop due to dampness. Also recommended for use on protected exterior concrete floors subject to dampness from beneath. In industry where corrosive alkalies and moisture conditions exist. "Black Jack" Sash and Screen Enamel: A low cost, high gloss black utility enamel. Us e: For interior use on wood and metal surfaces; exterior use on screens and sash. "Dulux" Bulletin Enamels: Our highest quality enamel for sign painting. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior signs. "Dulux" Furtje Resistant High Hiding Maintenance White Gloss: Similar to "Dulux" High Hiding Mainte nance White Gloss Enamel but completely lead free for use on walls, ceilings and trim where resistance to discoloration from industrial fumes (hydrogen sulfide, sulfur dioxide, etc.) is required. Resin Base: Soya-alkyd resin. "Dulux" High Hiding Maintenance White Gloss Enamel: Similar to "Dulux" Maintenance White Gloss Enamel, but with increased hiding to provide one coat coverage over most previously finished interior surfaces. New odorless formula. Resin Base: Soya-alkyd resin. Us e : Interior ceilings and walls of industrial plants. Not in tended for use on trim. "Dulux" High Hiding Mildew Resistant Mainte nance White Gloss Enamel: Similar to "Dulux" High Hiding Maintenance White Gloss Enamel, but with un usual resistance to mildew and fungus growths. Resin Base: Soya-alkyd resin. Us e: Interior walls, ceilings of industrial plants, factories, institutions, etc. "Dulux" Maintenance White Gloss Enamel: Has ex cellent whiteness, retention of whiteness, durability and 40 DUP210010833 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes general all-round performance. New odorless formula. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of industrial plants, factories, institutions, etc. "Dulux" Mill White Enamel Eggshell: A high hiding low eggshell finish, for use only on walls and ceilings of industrial plants, factories, etc. Not intended for use on trim. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of industrial plants, factories, institutions, etc. "Dulux" "Ovalite" Enamel Undercoat: Our finest odorless undercoat for use with all types of architectural enamels--gloss, semi-gloss, eggshell and flat. Dries quickly. Sands easily; flows out so smoothly that little sanding is required. "Ovalite" may be intermixed with all types of enamels for varying degrees of gloss. May be tinted with Universal Tinting Colors. Resin Base: Soya-linseed-alkyd resin. Us e : As an undercoat for general interior use. "Dulux" Super White Enamel: Available in three sheens: Gloss, Eggshell and Flat. Our finest interior white enamel made with odorless thinner. May be tinted to pastel shades with Universal Tinting Colors. Tough, durable, long wearing. Will withstand repeated washings. Resin Base: Soya-alkyd resin. Us e: Interior trim, walls, cabinets and other wood, plaster and primed metal surfaces. Mildew Resistant Enamel Undercoat: High resistance to mildew growths. Resin Base: Soya-alkyd resin. Us e: As an undercoat for "Dulux" High Hiding Mildew Resistant Maintenance White Gloss Enamel. Sanitary Gloss Enamel--Oyster White: A high gloss, durable, oyster white enamel. Highly resistant to mildew growth. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of food processing plants under abnormal moisture conditions and where mildew control is important. Sanitary Gloss Enamel White: A high gloss, durable white enamel. For use under abnormal moisture and damp conditions. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings. Porch and Floor Enamel; A quick drying, high gloss finish that will stand hard wear. Especially formulated so as not to show dust and dirt readily. Resin Base: Soyalinseed-alkyd resin. Us e: Exterior: porch floors, wood and concrete steps. Interior: wood floors, concrete floors that are dry and above grade. "Tufcote" Heavy Duty Enamel: Extremely resistant to gasoline, oil or grease; quick drying. One coat is usually sufficient to cover previously painted surfaces. Colors match those of leading implement manufacturers. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior metal and wood: tractors, farm machinery, road equipment, wagons, tools, water pumps, wheelbarrows. FLAT WALL PAINTS AND SEALERS Wall Color Alkyd Flat Enamel: Odorless, alkyd wall enamel, applies easily by brush, roller, or spray. Self sealing quality assures uniform color on new or old surfaces. Dries to a durable, low-sheen finish. White and colors to match "Flow Kote" Rubber Base Wall Paint and "Duco" Satin Sheen Enamel. Us e: Interior walls, ceilings and woodwork. Fire-Retardant Flat Wall Paint: Specially formulated to retard spread of flame. Dries to smooth, fiat surface; washable. Listed by Underwriters' Laboratories. Us e: Interior surfaces including wood, steel, plaster, composition board and other structural materials. Recommended for walls, ceilings, woodwork, beams, pillars, and trim. One-Coat Basement Waii Paint: Ready-to-use acrylic latex paint for interior basement and garage walls. Heavy consistency allows one-coat application over rough, porous surfaces. Resists mildew, alkali, and moisture. Us e: Porous surfaces such as cinder block, concrete block. Also poured concrete, plaster, and dry wall. Primer-Sealer: A combined priming and sealing coat, for use on porous surfaces such as aged plaster, cement, con crete, brick, wallboard, etc. Prevents suction; holds out succeeding coats, creating a uniform surface. May be tinted with Universal Tinting Colors where colored top coats are required. New odorless formula. Resin Base: Soya-linseed-alkyd resin. Us e: Prime coat on interior plaster, masonry, wallboard and similar porous surfaces. Sealer-Coater: A priming first-coater for two-coat-a-day painting systems. Dries rapidly to a dull luster, Brushes easily, has excellent hiding and sealing properties. No un pleasant odor. Resin Base: Vinyl emulsion. Us e: Prime coat on interior walls and ceilings, either unfinished or previously finished surfaces. "Speed Easy" Flat Wall Paint--White: An interior flat finish of the resin emulsion type. Made in semipaste form, requires reduction with water. Covers most surfaces in one coat, and dries so quickly that two coats may be applied the same day. No objectionable odor. Resin Base: Resin emulsion. Us e: Interior: walls and ceilings; over wallpaper, plaster, brick, acoustical tile, wallboard, ply wood, painted or unpainted surfaces. Stippling Flat: Primarily intended for application by pro fessional painters. For all forms of stippling and mottling. Made in white only, but may be tinted with Universal Tinting Oil Colors. Resin Base: Soya-linseed-alkyd resin. Us e : Interior walls and ceilings. "Town and Country" Flat White Enamel: New alkyd resin flat made especially for use by the Master Painter where a full bodied, washable interior flat is desired. Made only in white--may be tinted to any light color with Universal Tinting Colors. Processed with new odorless solvents for odor-free applications. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "FLOW KOTE" "Flow Kote" Rubber Base Wall Paint: A washable rubber base emulsion wall and ceiling paint. Easy to apply with brush or roller coater. Dries in 30 minutes to a velvet like sheen. May he recoated in 3 to 4 hours. Shows no brush marks, laps or streaks. No disagreeable odor. Tough and durable. Unusually wear resistant. Us e: Aged bare plaster, wallboard, wallpaper, and previously finished surfaces. Acts as its own primer on most old or new surfaces. HOUSE PAINTS Barn and Roof Paint: A ready mixed, durable, bright red oxide paint for exterior surfaces. Resin Base: Linseed oil. Us e: Exterior use on barns, sheds, fences, etc. 41 DUP210010834 W FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes "Dulux" Stucco, Shake and Shingle Paint: A durable protective and decorative coating; seals the pores against moisture penetration; preserves the distinctive texture of original surfaces. The white is "self-cleaning" after a period of normal exposure; the colors are chalk resistant. Resin Base: Soya-alkyd resin. Us e: Exterior: brick, cement, concrete, plaster, stucco, cement-asbestos siding. "Dulux" Trim and Shutter Paint: For all outside trim work. Unusually resistant to mildew and fungus growths. Quick drying qualities minimize damage from dust and bugs. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior wood: shutters, lawn furniture, trim, doors. Exterior primed metal: roofs, hand rails, fences, lamps, poles. "40" Outside White: Our highest quality white oil paint for use on structures which are painted all white. Use as white only; will fade if tinted. The combination of titanium pigments with other pigments results in a paint that is "self-cleaning" under normal exposure conditions. Easy brushing. Extra durable. Us e: Exterior wood: body and trim on houses, barns, outbuildings, fences. Exterior metal: when properly primed. House Paint Colors: For long life and long lasting good appearance. Easy to apply. Excellent coverage and hiding. Us e: Exterior: body and trim of wood houses, barns and outbuildings; also on exterior metal trim which is properly primed. Deep colors intended only for trim purposes-- shutters, blinds, doors, etc. 41 White Lead House Paint: Similar to "40" Outside White except that it is formulated with lead pigment. Easy to apply, excellent hiding. Medium gloss, self cleaning. Not to be tinted. Us e: Properly primed exterior wood or metal. 42 Chalk-Resistant White House Paint: Designed for (1) tinting with Universal Tinting Colors in producing special shades of house paint; (2) as a white to resist chalk staining of adjacent surfaces. Since it is slow-chalking, it does not have the "self-cleaning" properties of "40" Outside White. Us e: Exterior wood body and trim on houses, barns, out-buildings, fences, etc. Also on exterior metal which is properly primed. "Lucite" Acrylic House Paint--50 Outside White; and Colors: Revolutionary new blister-resistant house paint based on acrylic resin emulsion formula. Dries to hard, low-sheen finish. When used with 49 Blister-Re sistant Primer over bare wood, provides excellent resistance to moisture blistering, cracking, and peeling. Has unusual durability when applied according to directions. Us e: New or burned off wood surfaces, previously painted firm surfaces; properly prepared masonry and metal surfaces. Blister-Resistant Wood Primer--49 Outside White: New, penetrating wood primer, especially formulated for use with "Lucite" Acrylic House Paints to provide effective blister and crack resistance. Us e: Over new or unpainted wood, or over wood from which the old finish has been completely removed; or as a prime coat over firmly-adhering old paint. May be tinted. Fume Resistant Outside White: Lead free in pigment and drier; will not discolor in contact with hydrogen sulfide fumes found in industrial areas. Similar to "40" Outside White in other respects. 42 Masonry Block Primer: A very heavy semipaste paint designed for interior and exterior use in filling the voids of masonry blocks. Designed for use as a first coater to be followed by conventional interior or exterior finish coats, or can be used without topcoats to provide a heavy duty finish. Resin Base: Linseed oil. 39 Wood Primer White: Ready mixed primer designed for use on bare wood and t^Suiy weoLiicreu pamceci suxmces before applying house paints. Not to be used as finishing coat. Us e: Exterior wood surfaces, body and trim when new or badly weathered. Vinyl Masonry Paint: A vinyl emulsion coating. Its alkali resistance makes it an excellent finish for painted or unpainted stucco, cement, masonry, brick, asbestos shingles and siding, and asphalt composition shingles. No special primers are required. Resin Base: Polyvinyl acetate. MARINE FINISHES "Dulux" Marine Finishes: A special line of finishes for the pleasure-boat field; formulated to withstand water and harbor conditions such as salt spray, sun, and harbor gases. Quick drying; excellent durability; retain their gloss over long periods. The finishes include Yacht White Gloss, Semi-Gloss and Flat; Yacht Black; many attractive colors of Ship and Deck Finishes; Hard Racing Bottom Paints; Engine and Boot-Topping Enamels; Metal Primer; Paste Wood Fillers. The line also includes "Dulux" Clear Finish, "Dulux" Spar Finish, "Dulux" Clear Wood Primer, Ultra V Spar Varnish, and Anti-Fouling Bottom Paints. METAL FINISHES AND PRIMERS A great variety of primers are available for use in home and industry. While it is not practical to list all of them here, zinc chromates, red leads, primer-surfacers, zinc dust, heat resistant, etc., are included. Individually formulated for different metals such as: mill scale hearing steel, mill scale free steel, galvanized metal, copper, aluminum, stain less steel, and others. "Antoxide" Metal Primer, Black: Resin Base: Alkyd resin, linseed oil primer. Us e; Over rusted, hot rolled steel that has been hand cleaned. None of the conventional corrosion inhibiting materials are used. "Duco" Anti-Rust Finishes: Special group of metal primers and top coats to provide highly dependable pro tection from rust and corrosion for all metal surfaces--and the perfect base for whichever Du Pont finish coat is to be used, interior or exterior: "Duco" Anti-Rust Primer--No. 70 Red Lead: For damp-proof priming of rusted metal. "Duco" Anti-Rust Primer--No. 546 Zinc Chromate: For clean steel, tin, and aluminum. "Duco" Metal Primer--No. 783 White: For all new galvanized and copper surfaces. "Duco" No. 71 Wrought Iron Black: Dull black finish for all metal surfaces. "Duco" No. 544 Chrome Finish Aluminum: Bright aluminum finish rivals chromium for brilliance. DUP210010835 FABRICS AND FINISHES DEPARTMENT FINISHES . DIVISION: Trade Sales Finishes "Dulux" Galvanized Metal Primer: Designed especially for use as a prime coat for galvanized metal surfaces. Eliminates need for special treatment of galvanized metal. Can be used as a finish coat, if desired. Resin Base: Linseed-alkyd resin. Us e: Exterior and interior galvanized metal and copper surfaces. "Dulux" Metal Protective Paints and Metal Primer: Afford maximum protection to metal surfaces. Resin Base: Soya-iinseed-aikyd resin, u s e: Interior: structural steel, tanks, girders and beams, doors, window frames and sash. Exterior: roofs, corrugated siding, tanks and supports, structural steel, bridges, doors, window frames and sash. "Dulux" Tank Enamel White: An exceedingly white, durable, enamel type finish. Is "self-cleaning" under most conditions. Resin Base: Soya-alkyd resin. Us e: As a finish for the outside of exterior metal storage tanks to reduce in ternal temperature. "Dulux" Thermal Gray: Similar to "Dulux" Galvanized Metal Primer but for use on interior and exterior metal surfaces subject to temperatures up to 500F. Resin Base: Linseed-alkyd resin. "Dulux" Zinc Chromate Primer: Highest quality zinc chromate type primer for ferrous metal. Yellowish brown in color. Resin Base: Soya-linseed-alkyd resin. Us e: For interior and exterior use on properly cleaned metal surfaces. Heat Resistant Stack Paint--Black: A carbon black and graphite paint combined with treated oils which dry to a glossy finish. Resists heat and actually bakes while in service. Withstands temperatures up to 450F. Us e: Clean metal surfaces subject to heat contact. No. 785 Metal Primer: A good quality general purpose red lead/iron oxide type dark brown metal primer. Us e : Exterior and interior metal surfaces. Sub-Marine Metal Primer: A zinc chromate-type primer for use on properly prepared ferrous metal subject to under water exposure or conditions of extreme moisture. Yellow ish brown in color. Resin Base: Chinawood oil, phenolic resin. Us e: Inside or outside on properly cleaned metal surfaces subject to continual moisture or dampness. OILS AND THINNERS "Dulux" 200 Thinner: A special petroleum distillate for use with "Duco" Enamels and Clear Finishes, "Dulux" Paints and Enamels and with other products as directed on labels. "Dulux" 711 Odorless Thinner: A new odorless thinner to be used only in those products where its use is specifically recommended on labels. "Dulux" 710 Reinforcing Oil: A synthetic clear reducing oil. Resin Base: Soya-alkyd resin. Us e: In reducing "Dulux" Exterior Finishes and Cement and Stucco Paint in accordance with directions. STAINS Satin Sheen Oil Stain; A pigmented, flat drying stain in a linseed oil, rosin vehicle. Available in all popular shades. Us e : For staining all kinds of exterior and interior wood surfaces. Shingle Stain; A high grade, pigmented stain, using processed vegetable and creosote oils. Penetrates into the wood. Us e: Exterior shingle roofs and siding. Varnish Stain: A high gloss, quick drying combination stain and varnish. Makes possible staining and varnishing in one operation. Highly resistant to marring. "Tufcote" Graining Ground is used when changing from a. dark to a light surface. Resin Base: Phenolic resin, vegetable oil. Us e: Interior: floors, woodwork and furniture. PROFESSIONAL PAINTER LINE This line of paints is especially designed for use by pro fessional painters. All products are supplied in white, except for Professional Latex Wall Paint which features six colors in addition to white. The white goods may be tinted with DuPont Universal Tinting Colors. Each finish in the Professional Painter Line offers fast and easy application, good hiding and excellent appearance. VARNISHES Clear Wood Sealer: Versatile, heavy-duty sealer for use under all varnishes for added beauty and durability. Dries fast, allowing sealer and topcoat varnish to be applied same day. Improves adhesion of varnishes over oil stains. Us e: Any interior wood surface, including floors, paneling, trim, and furniture. Not for use under Penetrating Wood Finish. "Dulux" Exterior Spar Varnish: Our highest quality exterior varnish; pale, high build, tough and clastic. Resin Base: Soya-alkyd resin. Us e: Doors, furniture and mis cellaneous small surfaces not fully exposed to the weather. Not recommended for siding and trim of houses. "Dulux" Interior Varnish: Our highest quality high gloss interior varnish. Pale in color, easy brushing, hard drying; excellent resistance to alkali, hot and cold water, and alcohol. Quick drying. Resin Base: Linseed, ester gum, phenolic resin. Us e: Floors, trim, bars and furniture. "Dulux" Satin Sheen Varnish: Highest quality rubbedeffect varnish. Produces a uniform low sheen of satin smoothness. Easy to apply. Free flowing. Unexcelled for mar and water resistance. Resin Base: Soya-alkyd resin. Us e: Interior trim, woodwork, wood paneling and furni ture. Industrial Floor Finish: A high quality, high gloss clear topcoat for use over a previous application of Penetrating Wood Finish. The combination of these two products offers durability, long service, quickness and ease of cleaning. Resin Base: Linseed rosin modified phenolic resin. Us e: Gymnasium and industrial interior flooring where an extra durable clear finish is required. Penetrating Wood Finish: A clear penetrating finish of great durability. Dries with a dull luster. Resin Base: Chinawood oil, phenolic resin. Us e: Interior wood floors, wood paneling, wood trim and furniture. Super Clear Varnish: A pale, high gloss varnish. Resists discoloration from contact with hot and cold water. Resin Base: Phenolic resin, rosin, tung and soya oils. Us e: In terior: wood floors, woodwork and trim. DUP210010836 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes Textile Floor Finish: A single package, oil-free urethane high-gloss clear for wood and concrete floors. Extremely wear-resistant. Us e: Commercial application for floors subject to heavy traffic in textile mills, paper mills, industrial plants, or wherever a very tough and elastic clear coating is required. MISCELLANEOUS Paint & Varnish Remover: Non-flammable, water-rinse remover compounded to simplify the job of completely removing all types of finishes from wood, metal, plaster, masonry (and hardened paint brushes) without harming the surface. Heavy-bodied formula works equally well on vertical as well as horizontal surfaces. Paste Wood Filler: A natural color semipaste wood filler of excellent quality. Requires reduction with turpentine or mineral spirits for use. Us e: Filling the grain of interior or exterior open-grained wood surfaces; also recommended for marine work. Soil Retardant Finish: A transparent fluid containing colloidal silica. Possesses unique property of making a smooth painted surface so slick that dirt collection is minimized. Us e: Commercial application on painted tanks, signs, buildings, service stations. Also interior surfaces. Traffic Paint: Quick drying finishes for marking traffic lanes. Us e: Exterior street surfaces, interior floors of in dustrial plants for marking aisle boundaries for general traffic control. Universal Tinting Colors: For use with Custom Color white bases and ready-mixed shelf-goods colors and whites, including oil-base and emulsion finishes. Carefully controlled for tinting strength and color. i- 1 DUP210010837 FILM DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES: Packaging Sales Atlanta 9, Georgia Boston (Waltham 54), Massachusetts Chicago 3, Illinois Kansas City 5, Missouri New York 1, New York Philadelphia 3, Pennsylvania San Francisco 4, California 1430 West Peachtree Street, N. W. 45 Fourth Avenue 7 South Dearborn Street 1004 Baltimore Avenue Empire State Building, 350 Fifth Avenue 1616 Walnut Street 111 Sutter Street, Room 1018 Industrial Sales Chestnut Hill 67, Massachusetts Chicago 3, Illinois Cleveland 16, Ohio Los Angeles 58, California (with Converter Sales) New York 1, New York 824 Boyleston Street 7 South Dearborn Street 20575 Center Ridge Road 4455 Fruitland Avenue Empire State Building, 350 Fifth Avenue TRinity 2-5828 TWinbrook 9-3300 ANdover 3-7000 GRand 1-6629 LOngacre 3-6400 Kingsley 5-4050 EXbrook 2-0808 TWinbrook 9-8300 ANdover 3-7000 EDison 3-1424 LUdlow 3-3171 LOngacre 3-6400 EXPORT SALES OFFICE: Nemours Building Wilmington 98, Delaware PLANTS: Buffalo, New York Circleville, Ohio WAREHOUSES: Dallas, Texas Clinton, Iowa Florence, South Carolina Tecumseh, Kansas Los Angeles, California Oakland, California Old Hickory, Tennessee Richmond, Virginia Seattle, Washington PRODUCTS Acetate Film: A highly transparent film with good dimensional stability, produced from cellulose acetate. It is resistant to grease and oil. KINDS: Rigid (CA-143) and flexible (CA-148). t h ic k n e s s e s : From 0.00088 in. to 0.0020 in., with yields of 25,000 to 11,000 sq. in. per lb. Us e: Principally for laminations, foliation, document pres ervation, pressure sensitive tape; magnetic sound record ing tape; window cartons and envelopes; packaging of items, such as textiles, paper specialties, etc. efficient for high speed machine wrapping. Newest addi tion to the line are the polymer coated types ("K" cello phanes). They provide superior appearance, moisture protection and durability, and are highly resistant to oil and grease. They are designed for use on a wide variety of products, including baked goods, cookies, potato chips, and candy. One type of "K" cellophane is non-fogging and opens up unusual packaging possibilities for frozen baked goods and other frozen foods. THICKNESSES: From 0.0009 in. to 0.0018 in., with yields of 21,500 to 10,300 sq. in. per lb. a v a il a b l e f o r ms : Supplied by DuPont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from 1 Yi in. to 48 in. Cut-tosize sheets are prepared according to specifications in dimensions up to 40 x 48 in. Supplied in forms other than unprinted rolls and cut-to-size sheets by converters and fabricators, names of whom will be supplied upon request. Cellophane: KINDS: Basic film types include plain, semi-moistureprnof, and moistureproof in a number of grades to meet the pack aging requirements for many products. All types are trans parent, strong, flexible, resistant to grease and oil and are Us e: Cellophane is used as a wrapper or bag to provide protective packages with maximum visibility of product and good merchandising qualities. Other uses include fabri-t cated articles and industrial applications. Some of the major uses are: Plain (non-moistureproof)--Paper, textiles, pressure sensitive tape and other fabricated articles. Moistureproof (non-heat sealing)--Cigars, cigarettes, candy, cheese. Moistureproof Heat Sealing--Bakery products, fresh meats, nuts, potato chips, dried fruit, frozen food, dairy products, cereals, candy, drugs, medical sup plies, hardware, textiles. . 45 DUP210010838 FILM DEPARTMEN Semimoistureproof--Fresh fruits and vegetables, luncheon meats, milk bottle hoods. AVAILABLE f o r ms : Supplied by DuPont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from 1}4 to approximately 46 in. Cut-to-size sheets are prepared according to specifications in dimensions up to approximately 40 x 50 in. Supplied in printed bags, rolls, sheets and other forms by authorized converters and fabricators, names of whom will be supplied upon request. "Mylar" Polyester Film: An exceptionally strong, dura ble film with an unusual balance of properties suited to many electrical, industrial and packaging uses. It has a high level of physical properties, is relatively moisture insensitive, is water vapor resistant, and is unaffected by and does not transmit oils, greases and volatile aromatics. It has excellent electrical properties and is compatible with most varnishes and enamels giving it broad utility in electrical applications. It retains these properties and is useful from --80F. to over 300F., with the exact tempera ture conditions depending upon the application. k in d s : Seven available types include general purpose film suitable for electrical and other industrial applications; a special electrical grade film in thin gauges for capacitor applications; a transparent film in heavy gauges; a tensilized film for magnetic tape applications; a weatherable film for outdoor applications; heat sealing and heat shrinkable films for packaging. Th ic k n es s e s : From 0.00025 in. to .010 in., with yields from 80,000 to 2,000 sq. in. per lb. Us es : "Mylar" is suited to a wide range of applications: Polyethylene Film: A very lightweight, tough, flexible material that provides excellent resistance to the trans mission of moisture vapor. The film remains pliable to -- 70F., resists cracking, and is chemically inert and impervious to acids, alkali, most solvents, mildew and fungus. It is odorless and nontoxic. t h ic k n e s s : Films in thicknesses from 0.001 in. to 0.010 in. with yield from 30,000 sq. in./lb. to 3,000 sq. in./lb. Greater thicknesses available on special quotation basis. AVAILABLE FORMS: Construction and Agriculture: One and one-half (iyZ) to 10 mil flat sheeting in natural and black. Widths from 12 in. to 40 ft. Also SR-300 weatherable polyethylene lasting 3 to 4 times longer than standard natural polyethylene. Industrial: Flat sheeting in natural and black available in thick nesses from 1 to 10 mil. Widths from 1]A in. to 56 in. White opaque films in thicknesses from 1 to 3 mil. Widths 1 in. to 56 in. Packaging: High clarity films in thicknesses of 1, 134, lH and 2 mil. Widths available in flat sheeting up to 48 in. Us es : In construction and agriculture: As a moisture barrier, pond liner, irrigation, temporary silo, glazing, flashing and mulching. Industrial: Laminations, fabric replacement and pressure sensitive tapes. Packaging: Consumer goods in bags and overwrap packages. Electrical: Dielectric in capacitors; slot liners, wedges and phase in sulation for motors; tape insulation for motor and gen erator field coils; a barrier and insulating tape in wire and cable constructions; insulation between turns in transformer coils; backing for mica and other materials for insulation purposes. "Teflon" FEP-Fluorocarbon Film: An impermeable, heat sealable film produced by melt extrusion of "Teflon" FEP-Fluorocarbon resin. The film is unaffected by all solvents and practically all chemicals; has outstanding electrical properties; is capable of continuous service at 400F. ; can be heat formed to fit complex shapes and can be heat bonded under pressure to many metals; has good Other Industrial Uses: low temperature toughness, excellent antistick properties; can be treated to make it receptive to conventional ad i Base for magnetic recording tape and pressure sensitive hesives. tapes; base for metallic yarns; base for metalizing, deco rative laminations; surfacing material for acoustical tile; separator sheet for reinforced plastics; a base for car tography and drafting films; roll leaf base; decals; water Uses for the film are in printed circuitry and flexible cable, capacitors, wire and cable, gaskets, seals, and re lease applications. ! vapor barriers; apparel and garment stays; and various stationery uses such as book covers, page protectors, dis play folders, index card's and a base for typewriter rib bons. Weatherable form provides a low cost outdoor "Vexar" Plastic Netting: Integrally extruded plastic mesh material available in a wide variety offorms and colors. construction and glazing material. "Vexar" Plastic Netting is produced from both low and Packaging: high density polyethylene and polypropylene, and exhibits the outstanding chemical inertness and resistance to mois General packaging and wrapping, bundling, window ture, rot, and mildew which are characteristic of these boxes, bags, laminations, base for special coated film, resins. Mesh size and filament diameter may be varied over heat shrinkable skin-tight packages for smoked meats, a broad range to give products suited to a wide variety of f poultry and cheese. applications. It is available in commercial quantities as ii a v ail a bl e f o r ms : Supplied in rolls and cut-to-size sheets. Rolls are slit in 1/16-in. multiples, standard sheeting, lay-flat tubing, rigid piping, and fabricated bags. Uses for "Vexar" include packaging, particularly produce widths from x/% in. to approximately 55J4 in. Cut-to- for which product ventilation is desirable, shelf lining, size sheets are prepared according to specifications in dimensions up to approximately 43 x 43 in. decorative covers, filtration, display materials, fabric re placement, and many others. FILM DEPARTMENT `CEL-O-SEAL" BANDS DIVISION GENERAL OFFICES: Buffalo 7, New York River Road, Station B EXPORT SALES OFFICES: Same as above PLANT: Buffalo, New York PRODUCTS "Cel-O-Seal" Cellulose Bands: Are regenerated cellu lose; odorless, non-combustible, harmless; resistant to oils, fats, dirt and dilute acids, s t y l es a n d s iz es : Furnished in a wide range of sizes as: transparent, opaque, fluorescent, metallic, metallic pas tels and "Wind-O-Band" seals. May be obtained in black, white or a unde variety of standard colors. Can be attractively printed in a wide range of colors to personal ize and complement individual designs. Widely used for sealing closures on foods, drugs, wines, beverages, aero sols, chemicals and miscellaneous products. Bands may be hand or machine applied. Regularly shipped in solution, ready to use directly from containers. "WIND-o -b a n d " c e l l u l o s e s e a l s : Made with opaque front and back and transparent sides for the distilled spirits industry to provide decorative and positive package sealing and approved Federal tax stamp pro tection. They are sold only to licensed bottlers of dis tilled spirits and other manufacturers who place U. S. Tax Stamps on their products. DUP210010840 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES--INDUSTRIAL CHEMICALS:* Atlanta 8, Georgia ^hicag^ 32 Illinois Cincinnati 2, Ohio Cleveland 14, Ohio Detroit 35, Michigan Houston 27, Texas Minneapolis 2, Minnesota New Haven 13, Connecticut New York 1, New York Pittsburgh 19, Pennsylvania St. Louis 5, Missouri Waltham 54, Massachusetts Wynnewood, Pennsylvania 739 West Peachtree Street 4251 South Crawford Avenue 2308 Carew Tower 1321 National City Bank Building 13000 West Seven Mile Road 4215 Richmond Avenue 1207 Foshay Tower 46 River Street 350 Fifth Avenue 1715 Grant Building 10 South Brentwood Boulevard 45 Fourth Avenue 308 East Lancaster Avenue TRinity 6-1586 CLiffside 4-7676 CHerry 1-4570 MAin 1-6460 UNiversity 4-1963 MOhawk 6-0251 FEderal 5-4181 LOcust 2-5145 LOngacre 3-6456 GRant 1-5427 PArkview 6-1400 TWinbrook 9-8300 TRinity 8-2700 DISTRICT OFFICES--BIOCHEMICALS: Atlanta 8, Georgia Houston 27, Texas Minneapolis 2, Minnesota Palo Alto, California Western Springs, Illinois Wynnewood, Pennsylvania 739 West Peachtree Street 4215 Richmond Avenue 1207 Foshay Tower 701 Welch Road 40-47th Street 308 East Lancaster Avenue TRinity 6-1586 MOhawk 6-0251 FEderal 5-4181 DAvenport 6-6044 CHestnut 6-5902 TRinity 8-2700 PLANTS: Belle, West Virginia Bellwood, Virginia Cleveland, Ohio Cornwells Heights, Pennsylvania East Chicago, Indiana Ecorse, Michigan Fortville, Indiana Grasselli, New Jersey Miami Fort, Ohio *Van Waters and Rogers, Inc., are exclusive Western agents with offices in: Albuquerque, Boise, Denver, El Paso, Los Angeles, Phoenix, Portland, Salt Lake City, San Diego, San Francisco, Seattle, Spokane and West Sacramento. See local phone books for addresses. Philadelphia, Pennsylvania Strang, Texas Toledo, Ohio Wurtland, Kentucky PRODUCTS In d ic a t e s Re s a l e Pr o d u c t s INDUSTRIAL CHEMICALS Acetic Acid--Glacial--Reagent (Ethanoic Acid, Vin egar Acid)--CH-COOH: Clear colorless liquid with pun gent odor; crystallizes to a solid at 60F. (15.6C.); soluble in water, alcohol and ether; Sp. Gr. 1.048; B. P. 117.8C. Us e: As a reagent in chemical analysis or where an espe cially high purity acid is required. Co n t a in e r s : 1- and 5-pt., 6)/- and 13-gal. carboys. Adhesives No. 60, No. 77, No. 78 and No. 78X: Vinyl resin base white powders; soluble in water at elevated temperatures and with proper agitation. Us e: As an ad hesive for laminated paperboard. The bond made between flat surfaces of paperboard withstands long exposure to water without ply separation. Co n t a in e r s : 50-lb. paper bags. Adipic Acid--(CHsJ^COOH):: White crystalline solid; M. P. 152C.; soluble in alcohol; slightly soluble in water. Us e: In manufacture of plasticizers and polyester resins; in organic synthesis; as an edible food acid. Co n t a in e r s : 50-lb. paper bags. *Alum, Ammonium: (See Aluminum Ammonium Sul fate, Page 49.) Alum--iron Free: (See Aluminum Sulfate--Iron Free, Page 49). *Alum, Potash: (See Aluminum Potassium Sulfate, Page 49). DUP210010841 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Aluminum Ammonium Sulfate--N. F. and Tech nical (Ammonium Alum, Crystal Alum) -- (NHi^SfVAhCSOOu^HaO : Clear colorless crystals, lump, granules or powder; soluble in water and glycerin; in soluble in alcohol. Us e: In leather and fur tanning; baking powder; printing and dyeing fabrics; in pharmaceuticals and styptic products; for brining of pickles. Co n t a in e r s : 100-lb. paper bags, 100-lb., 325-lb. and 400-lb. fiber drums. Aluminum Chloride--Technical--AICI3'6HaO--Crys tal: Pale yellowish, granular, slightly odorous, deliquescent crystals; contains 96.5% AlCl3`6H30; soluble in water, alcohol and ether. Solution: 50% AlCls-6HsO in water. Clear, water white, corrosive liquid; miscible with water, alcohol and ether; gravity 32 Be. Us e: In photographic fixing baths; in manufacture of dry colors, aluminum hydroxide gel, and roofing granules. Co n t a in e r s : Crys tals--300-lb. polyethylene-lined fiber drums. Solution-- 325-lb. polyethylene drum (fiber overpack), tank cars and tank trucks. Aluminum Complex 101--Technical: A Werner type aluminum complex in isopropanol. Us e: As a water re pellent and sizing treatment for paper, textiles and other materials; for treatment of leather, masonry and other negatively charged surfaces; and for insolubilizing various water soluble or swellable coatings. Co n t a in e r s : 6)4-gal. carboys. ^Aluminum Potassium Sulfate--N. F. and Technical (Potassium Alum, Potash Alum)--KaSOi-AI^SOiV 24H30: Clear, colorless crystals, lump, granules or powder; soluble in water; insoluble in alcohol; M. P. 92C. Us e : In manufacture of photographic film hardeners, pharmaceuti cals, as a tanning agent. Co n t ain e r s : 100-lb. paper bags, 100-lb., 350-lb. and 400-lb. fiber drums. Aluminum Sulfate--Iron Free--U.S.P., Food Proc essing and Technical--AI3(S04)a'18H30: White lumps or granules; soluble in water; insoluble in alcohol. Us e: In manufacture of aluminum soaps, printing inks and lake colors; in tanning of white leather; in sizing and coating of paper; baking powder; in pharmaceuticals and styptic products; for brining of pickles. Co n t a in e r s : 100-lb. bags. Amine 248: Amber colored, non-volatile amine slurry with bis-(hexamethylene) triamine and its homologues as principal components, density is 0.9930 at 25C. 60% distills between 125-245C. at 35 mm. pressure. Us e: Polyamide resins, curing agent for epoxy resins, water treatment and corrosion inhibitor formulations and ab sorbing medium for acid gases. Co n t a in er s : 55-gal. drums and tank cars. Ammonia--Aqua--NH4OH: (See Ammoniacal Liquor, below.) Ammoniacal Liquor (Ammonium Hydroxide) -- NH4OH: Water-white liquid; 26 Be. at 60F. containing 29.4% NH, by weight. Sp. Gr. 0.8974 at 60F. (15.6C.). Us e : Manufacture of ammonium salts and other chemicals; in household ammonia and other cleaning agents; as a neutralizing agent; for pH control; in water purification; ingredient in ink and photographic developers; hydrolysis of gelatin and glue. Co n t a in e r s : 7,000-, 8,000- and 10,000-gal. tank cars. Ammonium Alum: (See Aluminum Ammonium Sul fate, this page.) Ammonium Chloride--Technical (Chloride of Am monia, Sal Ammoniac, Muriate of Ammonia) -- NHdCI: Granules, crystals and rods; soluble in water and glycerin; slightly soluble in alcohol; sublimes when strongly heated; Sp. Gr. approximately 1.53. Us e : As a flux for hot dip galvanizing sheet steel and other steel products; as a flux in the electrolytic refining of zinc. CONTAINERS: 100-lb. paper bags, 300-lb. fiber drums. Ammonium Chloride--White Fines Technical (Chloride of Ammonia, Sal Ammoniac, Muriate of Ammonia)--NH4CI: White, crystalline powder; soluble in water and glycerol; Sp. Gr. 1.52; sublimes when strongly heated. Us e: As an ingredient in dry batteries and cells; in galvanizing fluxes; in the manufacture of leather; in manu facture of roofing granules. Co n t ain e r s : 100-lb. bags, 275-lb. bbl. Ammonium Hydroxide--Reagent (Aqua Ammonia, Ammonium Hydrate)--NH4OH: Clear, colorless solu tion with pungent odor; Sp. Gr. approximately 0.9; F. P. below --40C. ; 27-30% NH3. Us e: As a reagent in chemical analysis where especially high purity is required. Co n t a in er s : 1- and 5-pt. bottles, 6)4- and 13-gal. carboys. Ammonium Hydroxide: (See Ammoniacal Liquor and Aqua Ammonia 26, this page.) Ammonium Suifamate--NH4SQ3NH2: White, crystal line, hygroscopic solid; extremely soluble in water; moder ately soluble in glycerin, glycol and formamide. Us e: For retarding flame in textiles and paper products (See "CM" Flame Retardant, Page 43 and "X-12" Flame Retardant, Page 49); in electroplating solutions. Co n t ain e r s : 50-lb. fiber drums, 100-lb. paper bags. Ammonium Sulfate--Technical--(NH4)!!SO.I: White crystalline material; very soluble in water; insoluble in alcohol; decomposes at 100C. Us e: As a nutrient in pro duction of yeast, as a flame retardant for wood, textiles, etc.; for ammonia-chlorine disinfection of water; as an ingredient in cleaning compounds and electroplating solu tions; in dyeing textiles and manufacture of ammonium salts; not for fertilizer use. Co n t a in e r s : 100-lb. paper bags, bulk. Anisole--Technical (Phenyl Methyl Ether) -- C0H5OCH3: A clear mobile liquid with alight ethereal odor, insoluble in water, soluble in alcohol and ether. B. P. 153.8C.; F. P. --37.3C. Us e: As a chemical intermediate in alkylation, acylation, halogenation and nitration re actions; as a solvent reaction medium; as a heat transfer medium. Anisole has high heat stability, high flash point, low vapor pressure and low order of toxicity. Co n t ain er s ; 5- and 55-gal. drums, tank cars, and tank trucks. Aqua Ammonia 26 U. S. P. (Ammonium Hydroxide, Ammonia Hydrate)--NH4OH: Clear, colorless solution, characterized by sharp, penetrating ammonia odor. Sp. Gr. approximately 0.9; F. P. below --40C.; 26 Be., 29.4% NHs. Us e: As an emulsion stabilizer; in the manufacture of ammonium salts and cuprammonium rayon; in house- 49 I '.1 i| .1 ;l DUP210010842 i, INDUSTRIAL AND BIOCHEMICALS DEPARTMENT l INDUSTRIAL CHEMICALS hold ammonia water; in textile scouring, dyeing and mildew-proofing; for glass cleaning in manufacture of mirrors; in saponifying fats and oils; for yeast foods; in manufacture of ink, varnishes, soap, resins, rubber and leather; in electroplating and photoengraving. Co n t a in er s : 96-lb. carboys, 385-lb. steel drums, tank trucks. Battery Acid (Electrolyte Acid, Storage Battery Acid, Sulfuric Acid)--HS04: Clear, colorless, corrosive liquid available generally at Sp. Gr. 1.835. Inquiries for special strengths are invited. Us e: As electrolyte in lead type storage batteries. Co n t a in e r s : 130- to 200-lb. glass car boys, tank cars, and tank trucks. n-ButanoI Formaldehyde 51-40: A clear, colorless re action product containing 40% formaldehyde, 51.5% n-butyl alcohol, and 8.5% water. Density 8.1 lb./gal.; viscosity 5.1 cp. at 25C. Us e: In manufacture of resins for textile, paper, and paint applications; chemical synthesis. Co n t a in e r s : 55-gal. drums; 4,000-gal. tank trucks (within a 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. *Copper Sulfate--Technical (Cupric Sulfate, Blue Vitriol, Biuestone)--CuS04-5H20: Blue, crystalline, granular or powdered material; soluble in water and alcohol;' effloresces in dry air; Sp. Gr. 2.286. Us e: As a germicide; in manufacture of stock powders; in the drawing of wire; in compositions for wood preserving. Co n t a in e r s : 100-lb. bags. ^nwflKfiei /.Cog FSITCUS SulfS^1* Cl \ Copperized CZC Chromated Zinc Chloride--Tech nical--CuCU, ZnCI2 and Na2Cr207: Granular material with slight brownish color or 50% water solution. A compan ion product to CZC chromated zinc chloride for wood preser vation. Possesses increased and exceptional preservation value and termite repellency and the treated wood is clean, odorless, paintable and flame retardant. Co n t ain er s : Dry --50- and 575-lb. drums. Solution--Tank cars. Cyclohexanol: (See "Hexalin" Cyclohexanol, Page 52.) Calcium Propionate: (See "Mycoban" Calcium Pro pionate, Page 54.) Cyclohexanone: (See "Hytrol" O Cyclohexanone, Page 53.) ^Caustic Soda: (See Sodium Hydroxide, Page 56.) Cetyl Alcohol: (See "Lorol" 24 Cetyl Alcohol, Page 53.) Chlcrcsulfenic Acid--Technical--CISQaH: Clear, col orless to light straw colored, oily, fuming, corrosive liquid with pungent odor; decomposed by water or alcohol; Sp. Gr. approximately 1.75; F. P. below --37C.; B. P. 154C.; minimum 98.5% CISO3H. Us e: In sulfation and sulfonation of organic compounds for manufacture of sulfonated oils, intermediates for dyes and pharmaceuticals, pesticides, detergents and ion exchange resins; for production of anhydrous HC1 and smoke-producing chemicals. Co n t a in e r s : 700-lb. steel or stainless steel drums, tank cars, and tank trucks. Chrome Complexes: A group of Werner type chromium complexes of carboxy acids in isopropanol. Now available are the complexes of the following acids: aminoacetic, p-aminobenzoic, cyanoacetic, gluconic, 2,4-hexadienoic, hydroxyacetic, mercaptoacetic, p-nitrobenzoic, betaresorcylic, tannic, and trichloroacetic. Others can be made available. (See also "Quilon" chrome complex and "Volan" bonding agent.) Us es : For changing the surface charac teristics of materials such as glass, natural or synthetic fibers, metal oxides, wood, paper, etc., to serve as anchoring agents for resins and other polymers, as absorbers of ultraviolet light, as anti-static agents, and many other possibilities. Co n t a in er s : 6J4 gal- carboys. CZC Chromated Zinc Chloride--Technical--ZnCI2 and Na2Cr207: Granular material with slight brownish color or 50% water solution. Solution: Gravity about 51.7 Be.;F. P. --37.2C. Us e: For preserving wood against decay, termite attack and for application as a flame re tardant. Treated lumber is clean, odorless, paintable, safe to handle and flame retardant. Co n t ain e r s : Dry--50and 625-lb. drums. Solution--Tank cars. Decanol: (See "Lorol" 22 n-Decanol, Page 53.) 1,4 Dichlorobutene-2--CICH2CH=CHCH2CI: Avail able as trans isomer in 95-98% purity. Vesicant colorless liquid of density 1.18-25/4C.; atmospheric boiling point 158C.; soluble in hydrocarbons. Us e: Intermediate in manufacture of unsaturated difunctional compounds, electroplating chemicals, biologically active compounds, and textile treating compounds. Co n t ain e r s : 55-gal. drums and tank cars. Diethylamine--Technical--(CH3CH2).NH: Colorless liquid; B. P. 55.4C.; Sp. Gr. 0.706; miscible with water and most organic solvents. Us e: In the synthesis of rubber chemicals, pharmaceuticals, pesticides, fungicides, herbi cides, corrosion inhibitors, and textile softeners, wetting agents, and emulsifiers. Co n t ain er s : 5- and 55-gal. drums; and tank cars. "CM" Flame Retardant: Fine, white, granular compo sition based on ammonium sulfamate and modified to pre vent afterglow and to improve penetration. Soluble in water; insoluble in the common dry cleaning solvents. (See Ammonium Sulfamate, Page 49 and "X-12" Flame Retar dant, Page 58.) Us e : Inflameretardant treatment of fabrics, paper, paper products and other cellulosic materials. Co n t a in e r s : 50-lb. fiber drums, 100-lb. paper bags. Diglycolic Acid--0(CHaCOOH)a : White crystalline solid; M. P. (pure) 148C.; soluble in water and alcohol; pH of 10% aqueous solution 1.4. Forms a nonhygroscopic mono hydrate at relative humidities above 72% at 25C. Us e: Tn manufacture of resins and plasticizers; in organic synthesis; sequestering agent; emulsion breaker in petro leum, and coagulant in rubber and plastics. Co n t ain e r s : 50-lb. paper bags. DUP210010843 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Dimethylamine--DMA--Anhydrous and Aqueous Solutions--Technical--(CH3)2NH: Anhydrous--color less gas, clear and water white when liquefied. Us e: In termediate in the manufacture of rubber accelerators and quaternary compounds; in manufacture of pharmaceutical intermediates, fungicides and herbicides; as a dehairing agent in leather processing; in manufacture of solvents and rocket fuels. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solution--55-gal. drums, tank cars and tank trucks. Dimethyl Sulfate (Methyl Sulfate)--(CH3)2S04: Waterwhite liquid; F. P. --31.8C.; B. P. 188.8C.; Sp. Gr. (15.6/15.6C.) 1.332. Us e: As a methylating agent in making intermediates, dyes and synthetic drugs. CON TAINERS: 10- and 55-gal. drums, 8,000-gal. tank cars. DMAC -- Dimethylacetamide --Technical -- CH=CON(CH3)2: Colorless liquid; B. P. 165.5C.; F. P. --20C.; Sp. Gr. 0.945; miscible with water and common organic s.olvents. Us e: As a solvent for polyacrylonitrile, vinyl resins, cellulose derivatives, styrenes, linear poly esters, and paint removers. As a catalyst and solvent in elimination, halogenation, cyclization, alkylation, inter esterification, phthaloylation reactions and others. Co n t a in er s : 5- and 55-gal. drums, and tank cars. DMF -- Dimethyl Formamide --Technical -- HCON(CH)2: Colorless liquid; B. P. 153C.; F. P. --61C.; Sp. Gr. 0.953; miscible with water and common organic solvents. Us e: As a solvent for vinyl resins in lacquers, films and printing inks, for pigments, dyes and inorganic salts. As a catalyst and solvent in many types of organic reactions such as halogenation, alkylation, elimi nation, cyclization and many others. As a reaction medium in dyes; as a selective refining solvent for acetylene, add gases and petroleum constituents. CONTAINERS: 5- and 55-gal. drums, tank trucks, tank cars. *Disodium Phosphate: (See Sodium Phosphate- -Di, Page 56.) "Duclean" No. 1 Inhibited Sulfuric Acid--Technical (60 Be. Sulfuric Acid Containing an Acid Pickling Inhibitor): Clear, reddish-brown liquid; miscible with water; Sp. Gr. 1.706; F. P. below --10.8C. Us e: In pickling iron and steel; for descaling and cleaning of steel and other metals under conditions where it is desirable to inhibit the acid corrosion of steel and ferrous alloys. Co n t a in e r s : 185-lb. glass carboys, 700-lb. drums, tank cars, and tank trucks. "Duclean" No. 2 Hydrochloric Acid Solution In hibited--Technical: Clear, water white liquid with pungent odor; miscible with water; Sp. Gr. 1.142; F. P. below --40C. Us e: In pickling iron and steel; for removing deposits, including hard water scale, hydrated iron and rust from evaporators, condensers, water distributing lines, water well screens, etc., where it is important to inhibit acid corrosion of steel and other ferrous metals. Co n t ain e r s : 125-lb. glass carboys, tank cars, and tank trucks. Engraver's Acid: (See Nitric Acid--Technical and En graver's Quality, Page 54.) Fatty Alcohols: (See "Lorol" Fatty Alcohols, Page 53.) *rerrous Sulfate--Technical (Copperas, Green Vit riol, Iron Sulfate)--FeSOWHaO: Bluish-green crystals, granular or powdered material; soluble in water; insoluble in alcohol; Sp. Gr. 1.898; M. P. 64C. Us e: In manufacture ofiron salts, pigments, dry colors, indigo dyes; as a mordant in dyeing and printing textiles; for purification processes in gas, sewage and water plants; in manufacture of brick. Co n t a in e r s : 100- and 200-lb. bags, 300- to 400-lb. bbl., hulk. Flame Retardants: (See Ammonium Sulfamate, Page 49, "CM" Flame Retardant, page 50, and "X-12" Flame Retardant, Page 58.) Flux, Galvanizing: (See Zinc Ammonium Chloride, Page 58 and Ammonium Chloride, Page 49.) Flux, Soldering--"Eureka" Soldering Flux Crystal --Zinc Chloride + Ammonium Chloride: White, crys talline powder; soluble in water. Us e: As a flux in soft soldering operations and preparation of liquid soldering fluxes. Co n t a in e r s : 50- and 600-lb. steel drums. Flux, Soldering--"Kleanrol" Soldering Flux Crystal --Zinc Chloride + Ammonium Chloride: White, crys talline powder. Us e : As a solder blanket flux in automatic soldering of sice-seams in manufacture of tinned containers. Co n t a in e r s : 50- and 500-lb. drums. Fluxes, Soldering Liquid--Triple "Eureka" and "Eureka" Soldering Flux: Clear, colorless water solu tions based on zinc chloride and containing other ingredi ents. Various gravities and compositions. Us e: General soft soldering and solder and lead-coating fluxes for use in the automotive, can, refrigeration, wire and other in dustries. Co n t a in e r s : I45-lb. carboys, 605-lb. drums. Fluxes, Tinning--Standard and "High Speed" Tin ning Flux 50: Clear, colorless water solution of zinc chloride and ammonium chloride; Sp. Gr. 1.526; F. P. be low --50F. Us e: As fluxing solutions in manufacture of tin plate, terne plate, tin strips, dairy equipment, refriger ator trays, automobile radiators, wire goods, etc. Co n t a in er s : 165-lb. carboys, 670-lb. drums. Formaldehyde Solution (Formalin)--CH2O: A clear, colorless, aqueous solution. Us e: In manufacture of phenolic and urea resins; in manufacture of casein plastics, dyes, chemicals for textile industry, and embalming fluids; in paper, leather and cork products; as a disinfectant, deodorant, preservative; for treatment of seeds and soil; for chemical synthesis. Low Me t h an o l Gr a d es : 37% formaldehyde by weight, max. 1% methanol by weight; 45% and 50% formalde hyde by weight, max. 2% methanol by weight. Co n t a in e r s : Tank trucks 26,000- to 38,000-lb. (within 200mile radius of Perth Amboy, New Jersey and Toledo, Ohio); 72,000-lb. tank cars. U.S.P. Gr a d es : 37% formaldehyde by weight, 6.5%15% methanol by weight. Co n t a in e r s : 25-lb. cases (lb. bottles); 100-lb. carboys; 90- and 475-lb. drums; 26,000to 38,000-lb. tank trucks (within a 200-mile radius of Perth Amboy, New Jersey and Toledo, Ohio); 72,000-lb. tank cars. 51 DUP210010844 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Formamide--Technical--HCONH2: Colorless, viscous Hydrochloric Acid--Reagent--36.5 to 38% HCI in hygroscopic liquid; B. P. 210C.; F. P. 2.5C. Us e: Ex ceptionally good solvent; softener (e.g., in paper, glues); Water Solution: Clear colorless fuming corrosive liquid with pungent odor; soluble in water, alcohol and ether; chemical intermediate. Co n t a in e r s : 55-gal. drums, 8,000- Sp. Gr. Min. 1.1854, Max. 1.1923; F. P. below --24F. gal. tank cars. (--31.1C.). Us e: For reagent or analytical purposes, or where hydrochloric acid of extremely high purity is re Formic Acid--Technical (Methanoic Acid)--HCOOH in Water Solution: Colorless liquid with irritating and penetrating odor; soluble in water, alcohol, ether and quired; in manufacture of food products. CONTAINERS: 1and 5-pt. bottles, 6J4- and 13-gal. carboys, tank trucks, tank cars. glycerin. 85% St r e n g t h 90% St r e n g t h Hydrochloric Acid--Technical and Food Processing (Muriatic Acid, Chlorohydric Acid, Hydrogen Chlo ride)--HCI in Water Solution: Clear colorless or yellow Sp. Gr. 1.201 1.210 ish corrosive liquid with pungent odor; miscible with water and alcohol. F. P. 9F. 24F. F. P. Us e: In dyeing, printing and finishing of textiles; in manu Gr a d e Sp . Gr . %HC1 Be l o w facture of formates, fat and oil hydrogenation catalysts, synthetic camphor, pharmaceutical intermediates, sol vents; for dyeing and deliming in tanning leather; manu facture of vinyl resin plasticizers; in electroplating; for coagulation of rubber latex. Co n t a in e r s : 125- and 127-lb. 18 Be. 20 Be. 22 Be. 23 B6. 1.142 1.160 1.179 1.189 27.92 31.45 35.21 37.14 --40F. --40F. --40F. --40F. i carboys, 515- and 525-lb. drums, tank cars, and tank trucks. Us e: In metal pickling and descaling; in manufacture of inorganic and organic chlorides, chlorinated synthetic "G-942" Tanning Agent: An aqueous solution of the resins and plastics; in the food industry for the hydrolysis of protein and starch, inversion of sugar and manufacture partial sodium salt of a polymeric carboxylic acid. Us e: In processing light-weight skins for the production of high of edible gelatin; in carbonizing wool and as a bleaching and dyeing assistant in the textile industry; as a prefluxing grade suede and grain leathers. Excellent properties for white clear through leathers. Possesses high skin-plumping ability. Co n t a in e r s : 500-lb. drums. agent for galvanizing and soldering; in the paper industry for cleaning and scouring wires, screens and felts; for re covery of glycerin in the manufacture of soap; in the puri fl "G. B. S." Globular Sodium Bisulfate--Technical: (See Sodium Bisulfate, Page 56.) fication of sand and clay; in deliming, tanning and dyeing of leathers; for etching aluminum. Co n t ain e r s : 125- to 130-lb. carboys, tank cars, and tank trucks. Glycolic Acid: (See Hydroxyacetic Acid.) Hydrochloric Acid, Inhibited: (See "Duclean" No. 2 Inhibited Hydrochloric Add, Page 51.) "Hexaiin" Cyclohexanol--CeHnOH: Colorless liquid; F. P. (pure) 25.2C. (usually shipped with 2.25% methanol as anti-freeze); B. P. (pure) 161.1C. Us e: Solvent in lacquers, shellacs and varnishes; homogenizer and stabilizer in soap, drycleaning and textile industries; intermediate for chemicals, plasticizers, lubricating oil additives. CON TAINERS: 55-gal. drums, 8,000- and 10,000-gal. tank cars and tank trucks. Hexamethylenetetramine (Urotropin, Hexamine)-- (CH3),N4: A white powder or granular solid; soluble in water, chloroform, and alcohol. At 263C. it sublimes with out melting; on contact with fire, it readily ignites and burns with a smokeless flame. Us e: In manufacture of phenolic molding resins, cork products, rubber accelerators, and pharmaceuticals; in chemical synthesis; for hardening casein, glue, and other proteins. Co n t ain er s : 50-lb. multiwall bags; 150- and 200-lb. drums. Te c h n ic a l Gr a d e: Granular and powder forms. Con tains 0.3% max. ash and 0.3% max. moisture. Te c h n ic a l Gr a d e FF: Granular FF contains 0.3%0.7% anticaking agent; 0.7% max. ash and 0.3% max. moisture. Powder FF contains 2.25%-3.75% anticaking agent; 3.5% max. ash and 0.3% max. moisture. ''Hydrofluoric Acid--Technical--HF in Water Solu tion: Clear colorless fuming liquid; attacks iron, glass and ceramic ware. F. P. St r e n g t h Sp . Gr . Be l o w 70% 1.258 --94.3F. Us e : As a pickling agent for stainless steels and for the removal of silica and siliceous scales from cast iron and steel products; in manufacture of alkylation catalysts, re frigerants, fluorides and acid fluorides; for etching and frosting glass. Co n t ain er s : 20-, 30-, and 55-gal. drums, tank cars. . Hydroxyacetic Acid (Glycolic Acid)--Technical Grade 70%--HOCHsCOOH: Light straw colored liquid con taining approximately 70% hydroxyacetic acid with traces of other organic adds; F. P. 10C. Us e: In dyeing and tan ning of leather; dyeing of textiles.; manufacture of cleaning compounds; adhesives; adhesives emulsifier; neutralizing agent--pH control; and sequestering agent; bright-dipping of copper, electro-polishing of stainless steel, and electro plating. Co n t a in e r s : 55-gal. lined steel drums, 6,000- and 10,000-gal. tank cars. DUP210010845 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS "Hytrol" 0 Cyclohexanone--C0Hi0O: Colorless liquid; B. P. 156.7C.; F. P. --47C. Us e: As a solvent in the textile, paint and varnish industries, especially for vinyls; as a chemical intermediate; lube oil additive. Co n t a in e r s : 55-gal. drums, 8,000- and 10,000-gal. tank cars. "Lorol" 11 Fatty Alcohol Technical: Colorless liquid containing about 80% lauryi and 20% myristyl alcohol. Sp. Gr. (25/25 C.) 0.832-0.836. Us e: Manufacture of lauryi chloride and its derivatives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. *lron Sulfate: (See Ferrous Sulfate, Page 51.) asuvs (Alpha-Hydroxypropionic Acid)--CHsCHOHCOOH in Water Solution: Various strengths; clear, colorless to dark brown, syrupy liquid; miscible with water and alcohol. Us e: In manufacture of phenolic plastics, lactates, and emulsifiers; anti-perspirants; as a delimer, plumping agent and acidulant in vegetable tanning of leather, and in manu facture of synthetic tanning compounds; as a mordant and assistant in textile dyeing and finishing; in brewing; as ani acidulating agent in manufacture of processed cheeses, pickles, olives, pectin, carbonated beverages, jams, jellies, infant foods. Co n t a in e r s : 120-lb. carboys, 440- to 465-lb. bbl., 490-500 lb. Liquipack drums, tank cars, and tank trucks. Lactic Acid--U. S. P. (Alpha-Hydroxypropionic Acid --85%) CHSCHOHCOOH in Water Solution: Clear, colorless, syrupy liquid; optically inactive; soluble in water, alcohol and ether; insoluble in benzol and carbon disulfide; F. P. approximately --40F. (--40C.). Us e: In manu facture of pharmaceuticals and chemicals. Co n t a in e r s : 120-lb. carboys. Lauryi Aicehoi: (See "Lorol" 5 and 7 Fatty Alcohol Technical, below.) "Lignasan" X Fungicide: A blue powder containing ethyl mercury phosphate. Us e: In the pulp and paper in dustry for slime control and pulp preservation; as a pre servative for paper sizes. Co n t ain e r s : 125-lb. drums. "Lorol" Fatty Alcohols: A group of straight chain (normal) even-numbered-carbon alcohols ranging from C-8 (octyl) to C-18 (stearyl). "Lorol" 5 Fatty Alcohol Technical: Colorless viscous liquid; Sp. Gr. (25/25 C.) 0.832-0.836; mixture of straight chain (normal) even-numbered-carbon alcohols (C-10 to C-18) with lauryi alcohol predominating. Us e: Intermedi ate in manufacture of detergents, lubricating oil additives, quaternary ammonium compounds, mercaptans and textile finishing agents. Co n t ain er s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 7 Fatty Alcohol Technical: Colorless liquid; Sp. Gr. (25/25 C.) 0.832-0.836. Similar to "Lorol" 5 except that it contains a higher percentage of stearyl alcohol. Us e: Intermediate in manufacture of lubricating oil additives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank "Lorol" 9 Fatty Alcohol Technical: Colorless liquid containing about 70% lauryi alcohol. Sp. Gr. (25/25 C.) 0.832-0.835. Us e : Manufacture of lauryi chloride and its derivatives. Co n t ain er s : 55-gal. drums, 8,000-gal. tank cars. "Lorol'' 20 Fatty Alcohol Technical -- CHs(CH2)eCH2OH: Colorless liquid. B. P. (pure) 195C. Sp. Gr. (25/25 C.) 0.823-0.826. Essentially normal octyl alcohol. Us e : Antifoam agent, intermediate in manufacture of plasticizers, lubricating oil additives and perfumes. Co n t a in er s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 22 Fatty Alcohol Technical -- CH^CHoisCHaOH: Colorless liquid. B. P. (pure) 231C. Sp. Gr. (25/25 C.) 0.828-0.832. Essentially normal decyl alcohol. Us e: Antifoam agent, intermediate in manufacture of quaternary ammonium compounds, lubricating oil additives, perfumes and plasticizers. Co n t ain e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 24 Cetyl Alcohol--National Formulary Grade --CH3(CH2),4CH2OH: White flakes; M. P. (pure) 49.6C. Cetyl alcohol meeting the requirements of the National Formulary VIII. Us e: Emulsifying and softening agent in cosmetics, salves and ointments. Co n t ain e r s : 140-lb. fiber containers. "Lorol" 28 Industrial Fatty Alcohol -- CHs(CHs)ieCH2OH: White flakes; M. P. (pure) 58.0C. Technical grade stearyl alcohol. Us e: Mold lubricant, intermediate in manufacture of lubricating oil additives, quaternary ammonium compounds and textile finishing agents. Co n t a in er s : 50-lb. paper bags. "Lorol" 28 Stearyl Alcohol--U. S. P. Grade-- CH3(CH2)i6CH2OH: White flakes. M. P. (pure) 58.0C. Stearyl alcohol meeting requirements of U. S. P. Us e: In gredient in lipsticks, cosmetic creams, lotions, ointments and salves. Co n t a in e r s : 50-lb. fiber containers. "Ludox" AS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% Si02 and 0.25% NHS; pH at 25C. 9.5 to 9.6; F. P. 32F. (0"C.). Us e; See "Ludox" HS and LS colloidal silicas, below. Suitable for applications requiring a volatile stabilizer and which would be detrimentally affected by sodium ions present in other grades of "Ludox" colloidal silica. Co n t a in e r s : 55-gal. drums. "Ludox" HS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% Si02. Ratio, wt., Na2O:Si02, 1:95; pH at 25C. 9.65 to 10.15; F. P. 32F. (0C.). Us e: For antislip treatment of rayon, cotton, and wool staple for improved yarn strength; compounding and post-dip treatment of latex foams and films to improve modulus and effect rubber savings; modifying latex ad hesives for improved bond strengths; for increased hardness and slip resistance in emulsion floor waxes; improved water and heat resistance of adhesive coatings and fibrous struc- 53 DUP210010846 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS s tures; for antisoil treatment of pile fabrics and miscel Mold and Rope Inhibitors: (See "Mycoban" Calcium laneous substrates; frictionizing agent for paper; binder Propionate and "Mycoban" Sodium Propionate, below.) for inorganic materials; precoating photo sensitized paper for color contrast. Co n t ain e r s : 55-gal. drums, tank trucks, Monomethylamine--Anhydrous and Aqueous Solu and tank cars. tions--CH3NH2: Anhydrous--colorless gas, clear and I ! | "Ludox" LS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% Si02. Ratio, wt., Na2_0:Si02_, 1:285; pH at 25C. 8.2 to 8.7; F. P. 32F. (0=C.). Us e : see ".uudox" HS Colloidal Silica, above. Co n t a in e r s : 55-gal. drums, tank trucks, and tank cars. water white when liquefied. Us e: In the manufacture of pharmaceutical intermediates for the xanthine alkaloids, theophylline, caffeine, the sympathomimetic drugs such as ephedrine, and the. analgesic meperidine; in manufacture of surface active agents; photographic developers; dyes; in manufacture of soil fumigants and fungicides for agri "Ludox" SM Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 15% SiOa charac terized by extremely small particle size averaging only 7 culture. Co n t ain e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solutions--55-gal. drums, tank trucks, tank cars. millimicrons. Ratio, wt.,Na20:Si02, l:159;pHat 25C. 8.1; F. P. 32F. (0C.). Us e: Binder for inorganic fibrous'ma Muriatic Acid: (See Hydrochloric Acid--Technical, Page i terials; antisoil applications to smooth surfaces; paper 52.) 1 coatings to improve abrasion resistance, printability and other properties; latex adhesive compositions for improved Muriatic Acid, Inhibited: (See "Duclean" No. 2 Hydro adhesion, etc. Co n t ain er s : 55-gal. drums. chloric Acid Solution Inhibited--Technical, Page 51.) Methanol--CH3OH: Colorless flammable liquid; B. P. 64.7C.; F. P. --97C.; Sp. Gr. (20/4 C.) 0.7913. Us e: Ingredient of automotive and other anti-freezes; in manu facture of formaldehyde; in manufacture of many methyl esters (e.g., dimethyl phthalate, methyl chloride); injection fluid for increasing power and octane rating of aviation gasoline; as a constituent of many solvents for varied pur "Mycoban" Calcium Propionate--Ca(CH3CH2COO)2: White powder. Us e: Inhibitor of mold and certain other microorganisms in baked goods, pasteurized process and blended cheeses and cheese foods packaged as slices and cuts for consumer distribution, and tobaccos. Co n t a in er s : 250-lb. drums. poses. Co n t a in e r s : 55-gal. drums; 6,000-, 8,000- and 10,000-gal. tank cars, and tank trucks. "Mycoban" Sodium Propionate--CH3CH2COONa: White powder. Us e: Inhibitor of mold and certain other microorganisms in baked goods, pasteurized process and Methanol Formaldehyde 33-55: Clear, colorless reaction blended cheeses and cheese foods packaged as slices and product containing approx. 33% by weight methanol, 55% formaldehyde, and 12% water. Weight per gal. 8.9; viscosity 2.8 cp. at 25C. Us e: In formaldehyde cuts for consumer distribution, and tobaccos. Co n t a in e r s : 60-lb. cartons (six 10-lb. packages), 250-lb. fiber drums. reactions where low water is preferred and the reaction medium is methanol; in manufacture of methylated urea Niter Cake: (See Sodium Bisulfate, Page 56.) and methylated melamine resins for use in paper and textile treatment, coatings, and laminating adhesives. Co n t a in e r s : 55-gal. drums; 4,000-gal. tank trucks (within 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. Nitric Acid--Reagent--69--71% HNO3 in Water Solu tion: Clear, colorless, highly corrosive liquid; soluble in water and ether; decomposes alcohol; Sp. Gr. 1.416-1.426; F. P. below --40F. (--40C.). Us e: As a reagent in chemi cal analysis and for other uses for which HNOs of extremely Methanol Formaldehyde 43.5-46.5: Clear, colorless reaction product containing 43.5% by weight methanol, 46.5% formaldehyde and 10% water. Weight per gal. 8.9; high purity is required; as an etchant in metallography. Co n t a in e r s : 1- and 5-pt. bottles, 6)4- and 13-gal. carboys, tank trucks. viscosity 2.1 cp. at 25C. Us e: In formaldehyde reactions where low water is preferred and the reaction medium is methanol; in manufacture of methylated urea and methy Nitric Acid--Technical and Engraver's Quality (Aqua Fortis, Hydrogen Nitrate, Azotic Acid)--HNO3 in Water Solution: Clear, colorless to light brown, fuming, 1 lated melamine resins for use in paper and textile treatment, coatings, and laminating adhesives. Co n t ain e r s : 55-gal. corrosive liquid; miscible with water. drums; 4,000-gal. tank trucks (within 200-mile radius of F. P. Perth Amboy, New Jersey); 8,000-gal. tank cars. Gr a d e Sp . Gr . %h n o 3 Be l o w Methyl Formate--Technical (97%)--HCOOCH3: Col orless, mobile, volatile liquid; B. P. 31.8C. Us e: As an ingredient in fumigants; as a solvent; in manufacture of formates, sulfa drugs and organic chemicals. Co n t ain er s : 55-gal. drums; 8,'000- and 10,000-gal. tank cars. 36 Be. 38 BA 40 BA 42 Be. 95% 1.330 1.335 1.381 1.408 1.493 52.3 -- 2F. 56.5 -- 4F. 61.4 -- 9F. 67.2 --30F. 95.0 --40F. Mineral Adhesive Solution--Technical: A mineral base adhesive modified to obtain rapid wetting and good ad hesion. Us e: For bonding metal foil to paper; for bonding insulating materials to metal. Co n t a in e r s : 55-gal. drums, tank cars. Us e: As an ingredient in nitrating acid; in manufacture of explosives, celluloid, nitrocellulose, lacquers, dopes, ce ments, dry colors, inorganic nitrates, insecticides, fertil izers, pharmaceuticals and vitamin products; as a nitrating agent in manufacture of dyes, intermediates, aniline. DUP210010847 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS nitrobenzene, quinoidine, etc.; for pickling and bright dipping stainless steel, copper alloys, aluminum and nonferrous metals; as a pickling agent for steel products; for passivating stainless steel and other nickel-chrome alloys; for purifying petroleum sludge acid; as an etching agent for zinc photoengravers' plates; for general oxidizing pur poses. Co n t a in e r s ; Technical--144- to 152-lb. carboys, 163- to 600-lb. drums. "Nogas" Metal Pickling Agent: Amorphous, brown powder; soluble in water and acids. Will give foam-pro ducing solutions when dissolved in water or acids. Us e: As an addition agent in acid pickling of iron and steel to produce a foam blanket and to improve the atmosphere by elimination of acid mist particles given off by the pickling operation. Co n t a in e r s : 65-lb. fiber drums, 300-lb. bbl. Octanol: (See "Lorol" 20 n-Octyl alcohol, Page 53.) Oleum (Fuming Sulfuric Acid)--H2SO4 and S03: Nearly colorless, fuming, corrosive liquid; soluble in water with violent evolution of heat; furnished in various strengths. Us e : As an ingredient.in mixed acids for ni tration purposes, such as in manufacture of explosives, dyes, intermediates and nitrocellulose products; in sulfonation of vegetable, marine and petroleum oils; in refining petroleum; for fortification of dilute sulfuric acid; for general organic sulfonation. Co n t a in e r s ; 775- to 825-lb. drums, tank cars, and tank trucks. Paraformaldehyde (Paraform, Trioxymethylene) -- (CH20)xH20: A white powder or granular solid; slowly soluble in water and alcohol; evolves formaldehyde gas when heated; CHsO content min. 95%. Us e: In manu facture of synthetic resins, pharmaceuticals and cork products; for hardening casein and glue; as a germicide, fungicide, deodorant; for fumigation. Co n t a in e r s : 50lb. multiwall bags; 100-, 125-, 250-, and 300-lb. drums. *Phenothiazine: Drench Compound and N. F.Powder. Us e: As an antioxidant for synthetic lubricating oils and as a polymerization inhibitor. Co n t a in e r s : I50-lb. fiber drums. *Phosphoric Acid--Technical and Food Processing --75% and 80% H3PO,j in Water Solution: Colorless, syrupy liquid; miscible with water in all proportions; F. P. 75% below -- 10F. (--23.3C.). Us e: As a pickling and rust-proofing agent, ceramic vitrifying agent and flux; in manufacture of phosphate salts; in plastics manufacture. Co n t a in er s : 160- to 180-lb. carboys, 700- to 750-lb. drums, tank cars, and tank trucks.* *PhosphorSc Acid 85% --N. F.--H3P04: Colorless, syr upy liquid; miscible with water; Sp. Gr. 1.69; F. P. approxi mately 20C. Us e: In manufacture of dental cements, pharmaceuticals and food products; as an acidulating agent in jellies, soft drinks, etc. Co n t a in e r s : 170- to 180-lb. carboys; 750- to 775-lb. drums, tank cars, and tank trucks. Potassium Silicate--Glass Technical: Weight ratio SiO2:K20 = 2.1; Colorless, anhydrous lump or white powder; soluble in water at elevated temperature and pressure. Us e: In manufacture of glass, ceramic, refractory materials and welding rods; in manufacture of potassium silicate solutions. Co n t ain e r s : 200-lb. burlap bags, 500-lb. drums. Potassium Silicate_Solution__Electronics 200__ Technical: Filtered, water white solutions having a Si02:K20 weight ratio of 2.07; especially low in heavy metals content. Us e: In coating cathode ray tubes with phosphors, in other uses for potassium silicate where a product of superior clarity and purity is required. Co n t a in e r s : 55-gal. polyethylene lined drums, tank cars, tank trucks. Potassium Silicate--Solution--Technical: Various ra tios of Si02:K2O in water solution; colorless mobile liquid at gravities of 30-40 B6. Us e: As a non-efflorescing base for inorganic paints and protective coatings; as a coating for roofing granules and welding rods; as a binder in manu facture of carbon electrodes; as an ingredient in flame re tardant paints and compositions. Co n t a in e r s : 55-gal. drums, tank cars, tank trucks. "Quilon" Chrome Complex: A Werner type chromium complex in isopropanol. Us e: As a water repellent and siz ing treatment of paper and other cellulosic materials; for treatment of felt hats, leather, wool fabrics, hydrophobic fibers, and siliceous and other negatively charged surfaces; as an anti-blocking or release agent; for insolubilizing various water soluble or swcllable coatings. CONTAINERS: carboys, 55-gal. drams. Sal Ammoniac: (See Ammonium Chloride, Page 49.) Salt Cake--Industrial Grade (Sodium Sulfate); So dium Sulfate SR--Na2S04: White granular or powdered, crystalline material; soluble in water; containing a mini mum of 95% Na2S04. Us e: In manufacture of sulfate and kraft paper, glass, sodium sulfide and other mineral salts, blanc fixe, ceramic glazes; as an ingredient in mineral animal foods. Co n t a in e r s : 100-lb. bags, bulk. *Soda Ash: (See Sodium Carbonate, Page 56.) *Sodium Acid Fluoride--Technical (Sodium Bifluo ride)--NaHF2 : White crystalline powder; soluble in water. Us e: As a laundry sour; in etching glass; an ingredient in electroplating solutions. Co n t a in er s : 150- and 375-lb. drums. *Sodium Bicarbonate--Technical and U. S. P. (So dium Acid Carbonate, Baking Soda)--NaHC03: White crystalline or granular material; soluble in water; insoluble in alcohol; loses C02 at 270C. Us e: In manufacture of baking powder, pharmaceuticals, effervescent salts and food products; as a neutralizing agent in leather tanning, textile, food and paper industries; as an ingredient in fire extinguishing compounds. Co n t ain e r s : 100-lb. bags. 55 DUP210010848 fi. INDUSTRIAL AND BIOCHEMICALS DEPARTMENT 1; M INDUSTRIAL CHEMICALS *Sodium Bichromate--Technical (Sodium Dichro mate)--Na2Cr207-2H20: Reddish, deliquescent crystals or fine, granular material; soluble in water; insoluble in alcohol; decomposes at 400C. Us e: In chrome tanning of leather and as an insolubilizing agent for glue, gums and gelatin; in manufacture of chrome pigments, for pickling copper alloys; as a corrosion inhibitor in aqueous systems. Co n t a in e r s : 100-Ib. bags, 100- and 400-lb. drums. Sodium Metasiiicate--Technical--Na2SiQ3-5HsiO: White, granular, translucent solid; soluble in water; in soluble in alcohol; aqueous solution strongly alkaline in reaction. Us e : As a soap builder and ingredient in de tergents and cleaning compounds for cleaning fabrics, glass, ceramics, metal products, etc.; as a detergent in kier boiling of cotton goods; as a water softener. Co n t a in e r s : 100-lb. bags. *Sodium Bifluoride: (See Sodium Acid Fluoride, Page 55.) Sodium Bisulfate--Globular Technical "G. B. S." (Sodium Acid Sulfate, Niter Cake, Bisulfate of Soda) --NaHS04: White, opaque or translucent, globular shaped pellets; soluble in water; aqueous solution strongly acid in reaction. Us e: As an ingredient of cleaning compositions, metal pickling compounds, metallurgical fluxes. Co n t ain e r s : 100-lb. bags, 100- and 400-lb. fiber drums, bulk. ^Sodium Nitrate--Technical (Chile Saltpeter, 5uua Niter)--NaN03: Colorless or white, hygroscopic, crystal line material; soluble in water; slightly soluble in alcohol and glycerin; M. P. approximately 308C.; decomposes with further heating. Us e: In manufacture of potassium nitrate, red lead, dyes and intermediates, explosives and pyrotechnics; as a constituent of metal fluxes and heat treating salts; as an ingredient in enamels and glass; for fixing the color of cured meat and poultry products; as a general oxidizing agent. Co n t ain er s : 100-lb. bags. Sodium Bisulfite--Solution--Technical and Food Processing (Sodium Acid Sulfite)--NaHSOs in Water Solution: Clear, colorless liquid with sulfurous odor; con *Sodium Phosphate--Di--Anhydrous--Food Grade --Na.HP04: White granular or powder; soluble in water; insoluble in alcohol. Us e: Boiler water treatment; in mak ing glazes for potteries, porcelains and chinaware; as an tains at least 37% NaHSOs. Us e: In the manufacture of emulsifier in making process cheese; in manufacture of ! dyes, intermediates, and other organic chemicals. Co n pigments such as cobalt phosphate. Co n t ain er s ; 100-lb. t a in e r s : 505-lb. bbl. paper bags, 125- and 350-lb. fiber drums. ! *Sodium Carbonate--Anhydrous Technical (Soda ^Sodium Phosphate--Tri--Technical and Food Grade Ash, Calcined Soda)--Na2C03(58%Na2O): White, (Trisodium Phosphate)--NasP04'12Hs0 (Dodecahy- amorphous powder, dense or light; soluble in water; M. P. drate)--Anhydrous Grade also available: Colorless 851C. Us e: In manufacture of sodium compounds and crystals; soluble in water; M. P. approximately 73C.; other chemicals, glass, soaps, ceramics, detergents, paper; aqueous solution alkaline in reaction. Us e: As a water as a water softener for treatment of municipal and in softener; in manufacture of phosphates, soaps, detergents, dustrial supplies; as a detergent in laundries; as an in paint cleaners, boiler compounds, scouring powders, house gredient in metal cleaning compositions. Co n t ain e r s : hold cleaners; as an alkali builder for laundries; for cleaning 100-lb. bags, bulk. textiles, glass, metals, dairy and food processing equipment; for neutralizing acid residues on pickled steel. CONTAINERS: 100-lb. bags, 100- and 325-lb. fiber drums. Sodium Dimethyl Dithiocarbamate--40% Solution --Technical--(CH3)aN-CSSNa: Amber colored, clear water solution; Sp. Gr. 1.2. Us e: As an accelerator short Sodium Propionate: (See "Mycoban" Sodium Propi stop in the rubber industry. Co n t a in e r s : Tank cars, onate, Page 54.) tank trucks and 540-lb. drums. *Sodium Pyrophosphate--Technical (Tetrasodium i *Sodium Fluosilicate: (See Sodium Silicofluoride, Page 57.) Pyrophosphate)--Na4PaO,: White, granular, powdered or amorphous material; soluble in water; insoluble in alco hol; aqueous solution possesses an alkaline reaction, water softening and dispersing action on hard water soaps, clays : *Sodium Hydroxide--Technical (Caustic Soda, So dium Hydrate, Lye)--NaOH; White, deliquescent, and other inerts. Us e : In manufacture of iron and other pyrophosphates; as a water softener, soap builder and as amorphous solid, flakes or crystalline material; soluble in water, alcohol and glycerin; M. P. 318C. Also as a color less water solution. Us e : In manufacture of soap, sodium salts, rayon, chemical wood pulp, intermediates, indigo, aniline dyes, phenols, paper, mercerized cotton, paints, an ingredient in detergents for cleaning fabrics, glass, metals, etc.; in electroplating solutions; in thinning clay slips for paper coating; in wool scouring; as a general dispers ing agent. Co n t a in e r s : 100-lb. bags, 100- to 325-lb. fiber drums. . pigments and varnishes; for refining petroleum and vege table oils; in reclaiming rubber, softening water; in bleach ing, dyeing and printing of textile fabrics; as a detergent for cleaning textiles, metals, etc.; as a plating and storage battery electrolyte. Co n t ain e r s : Liquid--tank cars, tank trucks. Other grades--in drums. Sodium Hyposulfite: (See Sodium Thiosulfate, Page 57.) Sodium Silicate--Glass--Technical--Ratio % Si02* %Na20--1.95 and 3.25: Clear, colorless to slightly green ish, glassy lumps or white powder; soluble in water at ele vated temperatures and pressures. Us e: In manufacture of sodium silicate solutions; in enamel frits; in coated welding rods and cement. Co n t a in er s : 100-lb. burlap bags, 425and 500-lb. drums, bulk. Dissolvers available on rental basis for preparing large volumes of solution. DUP210010849 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Sodium Silicate Solution--Technical (Liquid Silicate of Soda, Water Glass): Clear or slightly cloudy liquids of various SiOa -NaaO ratios; gravity from 34-6 0 Be. Us e : As a corrugated boxboard adhesive; in the manufacture of silica gel; in the manufacture of hot-top collars for pouring molten metal; as a welding rod coating; in manufacture of soap; as a stabilizer in peroxide bleaching of cotton and rayon; for silk weighting; in foundry core binders; in roofing granules. Co n t a in e r s : 55-gal. drums, tank cars, and tank trucks. *Sodium Silicofluoride--Technical (Sodium Fiuosilicate)--Na3SiFe: White, granular powder; moderately soluble in water; insoluble in alcohol; aqueous solutions possess an acid reaction. Us e: As an opacifier in manu facture of glass and enamels; as a flux in vitreous enamels and in remelting secondary aluminum; in electrodeposition of tin and lead. Co n t ain e r s : 100-lb. bags, 125- and 400-lb. drums. *Sodium Sulfate--Anhydrous--Technical (Super Sulfate of Soda)--Na2S04: White crystals; soluble in water; M. P. 884C. Us e: In the manufacture of.glass; for standardizing dyes and dyeing textiles; as a builder and filling agent in detergent products; in manufacture of chrome pigments. Co n t a in e r s : 100-lb. bags, bulk. Sodium Sulfate--Industrial: (See Salt Cake, Page 55.) *Sodium Sulfide--Technical--60% Na2S: Deliquescent, yellow to brown solid or thick flakes. Aqueous solution strongly alkaline in reaction. Us e: As a depilatory in tan ning; in textile dyeing and printing; the beneficiation of ores and precipitation of heavy metals. Co n t a in e r s : 350- to 710-lb. drums. *Sodium Sulfite--Anhydrous Technical--Na2S03: Tan or slightly pink, crystalline powder; soluble in water; slightly soluble in alcohol; aqueous solution possesses a reducing action. Us e : As a bleach and general reducing agent in manufacture of dyes and intermediates; deoxygenating boiler feed water; as an antiseptic and pre servative. Co n t a in er s : 100-lb. paper bags. Sodium Thiosulfate--Technical, Food Processing and Photo Quality (Sodium Hyposulfite, Hypo, Antichior)--Na2S203-5H20: Colorless to white, translucent, efflorescent crystals; soluble in water; insoluble in alcohol; M. P. approximately 48C. ; decomposes with further heat ing. Us e: As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper, pulp, textiles, etc.; in manufacture of dyes. Co n t a in e r s : 100-lb. bags. Sodium Thiosulfate--Anhydrous Technical, Food Processing and Photo Quality (Sodium Hyposulfite, Hypo, Antichlor)--Na2S203: White granular crystals; soluble in water; insoluble in alcohol. Us e : As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper,pulp, textiles, etc. Co n t a in e r s : 64-and 100-lb. bags.* *Sodium Tripolyphosphate--Technical--NasPsOio: White, powdered or granular, free-flowing material; solu ble in water. Us e: Household and industrial cleaning compound formulations; textile processing; dairy deter gents; deflocculation of clays and other solids in suspension. Co n t a in e r s : 100-lb. bags, 100- and 325-lb. fiber drums. Stearyl Alcohol: (See "Lorol" 28 Stearyl Alcohol, Page 53.) Strontium Nitrate--Technical--Sr(N03)2: White crys talline powder; soluble in water; slightly soluble in alcohol; Sp. Gr. 2.98; purity approximately 97%; flame tests carmine-red. Us e : In manufacture of railroad and highway flares, marine signals, fireworks, pyrotechnics, and color pigments. Co n t a in e r s : 100-lb. bags, 600-lb. bbl. Sulfamic Acid--Technical--Crystal and Granular Grades, HSO3NH2: White crystalline or granular solid, soluble in water; aqueous solutions approach the common mineral acids in acidity; all common salts highly water soluble. Us e: For removing scales and deposits from boil ers, heat exchangers, condensers, evaporators, jacketed vessels, etc.; Felt shower water pH adjustment to retard felt fillup; chlorine stabilization and pH reduction agent for swimming pools; oil well descaling agent; as an in gredient in household cleaning formulations; in nitrite removal in azo dye manufacture and piece dyeing of tex tiles and leather; in sulfation of alcohols; as a catalyst for urea-formaldehyde resins; as the electrolyte in plating baths. Co n t ain e r s : 400-, 425-lb. fiber drums. *Sulfur--Technical and N. F. (Commercial Flour Technical, Light and Heavy Refined N. F., Flowers of Sulfur Sublimed, Roll Sulfur Technical, Com mercial Rubbermakers' Technical)--S: All grades. Pale yellow, solid, amorphous, crystalline sticks or powder of varying degrees of fineness; insoluble in water; soluble in sodium sulfide, carbon disulfide and sulfur chloride. Us e: In manufacture of rubber, paper, sulfuric acid, ce ments, explosives, pharmaceuticals, glass, paints, matches, leather, pyrotechnics, steel, soaps and for many other materials. Co n t a in e r s : 50- to 200-lb. bags, 165- to 500-lb. bbl. Sulfur Trioxide--Stabilized Liquid S03, Gamma Form: Colorless, fuming, corrosive liquid, reacts ex plosively with water. Us es : As a sulfating and sulfonating agent for detergent, lubricating oil additives and synthetic organic chemicals manufacture. Co n t ain e r s : 750-lb. drums, tank cars and tank trucks. Sulfuric Acid--Reagent--95 to 98% H2SO4 in Water Solution: Clear, colorless, heavy, oily liquid; dissolves in water with evolution of heat; Sp. Gr. 1.84; F. P. --15C. Us e: As a reagent in chemical analysis or where sulfuric acid of an especially high purity is required. Co n t ain er s : 1- and 5-pt. bottles, 6)/- and 13-gal. carboys, tank trucks. Sulfuric Acid, Fuming: (See Oleum, Page 55.) Sulfuric Acid, Inhibited: (See "Duclean" No. 1 In hibited Sulfuric Acid, Page 51.) Sulfuric Acid--Technical (Oil of Vitriol)--H2SO4: Clear, colorless, heavy, oily, corrosive liquid; soluble in water in all proportions with evolution of heat. All com mercial strengths. Us e : In manufacture of superphos phate fertilizers, ammonium sulfate from by-product coke ovens, mineral colors, explosives, inorganic acids, phosphates, alum, intermediates, dyes and other organic chemicals; in refining of petroleum and manufacturing of sulfonated oils; for pickling iron and steel and bright 57 DUP210010850 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT dipping nonferrous metals; in pickling of hides and chrome tanning of leather; in sizing and parchmentizing paper; in manufacture of synthetic rubber latex, rayon, synthetic detergents, sugar and starch; as a general dehydrating agent; assistant in dyeing, bleaching, carbonizing, mercer izing textiles; production of bleaching clays; animal and vegetable oil refining; catalyst in alkylation process for manufacture of high octane gasoline. Co n t ain e r s : 180to 200-lb. carboys, 700- and 750-lb. steel drums, tank cars, and tank trucks. Tanning Agent: (See "G-942" Tanning Agent, Page 52.) *Tetrasodium Pyrophosphate: (See Sodium Pyrophos phate, Page 56.) INDUSTRIAL CHEMICALS to --30C. Us e: As a starting material for the preparation of urea formaldehyde resins for the plastics, textile, paper, chemical, and wood industries. Co n t ain e r s : 55-gal. drums; 4,000-gal. tank trucks (within 200-mile radius of Perth Amboy, New Jersey); 8,000-gal. tank cars. "Volan" Banding Agent--Methacrylate Chromic Chloride: A Werner type chromium complex in isopropanoh Us e: As a bonding agent applied to glass fibers used in reinforced plastic laminates to improve the adhesion be tween glass and resin, especially under moist conditions; also to improve adhesive bond between other hydrophilic surfaces such as paper and wood and polymeric coatings or impregnants. Co n t ain e r s : 6j^-gal. carboys and 55-gal. drums. Thiodipropionate Antioxidant: White, low melting solid consisting of mixed esters of thiodipropionic acid; 70% lauryl ester, 20% myristyl ester, and 10% of cetyl Wood Preservatives: (See CZC ChromatedZinc Chloride, Page 50; Copperized CZC Chromated Zinc Chloride, Page 50; Zinc Chloride, this page.) ester. Melting point 30-33C., specific gravity of solid is 0.975 at 25C.; specific gravity of liquid is 0.919 at 40C. Us e: Antioxidant for olefin polymers. Chemical preserva tive in edible fats and oils. Co n t a in e r s : 30 gal. drums with 220 lbs. net product. "X-12" Flame Retardant: White crystalline material, completely soluble in hot water. Especially formulated to provide temperature stability and improve aging charac teristics. Exerts a stabilizing effect upon many dyes, im proving light fastness and crocking characteristics. Re Trimethylamine--Anhydrous and Aqueous Solu tions--Technical--N(CHS)S: Anhydrous--colorless gas, clear and water white when liquefied. Us e: Intermediate for choline salts (animal feed supplement) and quaternary ammonium salts; in organic synthesis; in manufacture of ion exchange resins and pharmaceutical intermediates. Co n t ain e r s : Anhydrous--100-lb. cylinders, tank trucks, sistant to removal by drycleaning solvents. Us e: One-step, renewable-type flame retardant treatment for use on cellulosic materials, including cotton, viscose rayon, and paper; not suitable for use on acetate rayon, or synthetic fibers, except where blended with substantial percentages of cellulosic varieties. Co n t ain e r s : 50-lb. fiber drums, 100lb. paper bags. tank cars. Aqueous solutions--55-gal. drums, tank cars, and tank trucks. Zinc Ammonium Chloride--Technical--ZnCl-- 3NH4CI: Granular or crystal; foaming and nonfoaming; Urea, Crystal NF (Carbamide)--(NH2)2CO: White crys tals, M. P. 132.7C.; Sp. Gr. (solid) 1.335. Us e: Manufac ture of urea-formaldehyde resins for adhesives, protective finishes, molding powders, and treatment of paper and textiles; for treating wood and textiles; solubilizing agent soluble in water. Us e: As a fluxing salt for hot dip gal vanizing of pipe, tubes, tanks, malleable iron fittings, wire, etc.; as a flux in metal soldering and tinning; in electric batteries; in manufacture of soldering compounds. Co n t a in e r s : 100-lb. paper bags, 400-lb. drums. for starches and proteins in adhesives and paper coatings; softening agent for paper and cellulose; intermediate in the ! manufacture of chemicals, dyes and pharmaceuticals; in Zinc Ammonium Chloride--High Ratio WA--Tech gredient in fire-retardant paints; ammoniated dentifrices; nical --ZnCI2-1.9NHtCI: White crystals; soluble in water. in the preparation of skin creams, lotions and deodorants; Us e: As a preflux especially in continuous galvanizing i1 stabilizer in explosives; blowing agent for porous articles (foamed latex, sponges); dewaxing of oils; medicinal pur operations. Co n t a in e r s : 100-lb. paper bags. poses and (non-corrosive) de-icing of airport ramps and walkways. Co n t a in e r s ; 100-lb. paper bags. Zinc Chloride--Fused and Granular Technical (But ter of Zinc)--ZnCI2: White translucent, hygroscopic solid or white, granular powder; soluble in water and alcohol; Urea, Shotted (Carbamide)--(NH2)2CO: Small round white pellets which remain relatively free flowing and noncaking. Us e: Same as Crystal Urea, except where NF grade is required. Co n t ain e r s : 100-lb. paper bags. M. P. 262C.-; B. P. 732C. Solution: ZnCl2 of various concentrations in water solution; clear, colorless solutions; miscible with water in all proportions, becoming slightly turbid at high dilutions. Us e: As an ingredient in dry cell batteries, oil well completion fluids, tinning, galvanizing and soldering fluxes; for preservation and flameproofing Urea Formaldehyde 25-60: Clear, colorless, stable urea of wood; in manufacture of vulcanized hard fiber, inter formaldehyde reaction product with F/U molecular ratio mediates, dyes, in reclaiming synthetic rubber. CON of approx. 4.8 to 1. Contains (by weight) 60% formalde TAINERS: Granular--50- and 650-lb. drums. Solution-- hyde, 25% urea, and 15% water. Weight per gal. 11.1 lb.; 170-lb. carboys, 690-lb. drums, tank cars. Fused--1,100-lb. viscosity 260 cp. at 25C.; B.P. approx. 100C.; F.P. --20 drums. DUP210010851 INDUSTRIAL AND BiGCHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS ANTI-FREEZE PRODUCTS Commercial Methanol Anti-Freeze (C.M.A.): A meth anol base product with chemical rust and corrosion inhibitor. Has good heat transfer properties. Recommended for protection to --30F. in vehicles with standard (160F.) opening thermostats. Co n t a in e r s : 55-gal. drums. "Telar" Anti-Freeze and Summer Coolant: A con centrated ethylene glycol base product with special rust inhibitors that protect all cooling system metals, including aluminum, against rust and corrosion in winter and sum mer. It can be mixed with any potable water and never needs to be drained from a properly operating cooling system. A built-in signalling system, Color Check, warns of cooling system failure. The color of "Telar", bright red, changes to yellow when serious cooling system failure occurs and the coolant turns corrosive. Recommended for use in all liquid cooled internal combustion engines. Co n t a in e r s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case). "Zerex" Anti-Rust Anti-Freeze: A concentrated ethy lene glycol-base product made to a special DuPont formula. It contains MR-8, a special chemical rust in hibitor that gives excellent protection to all metals, in cluding aluminum, found in the cooling system. It will prevent rust and corrosion in the cooling system for one season. It is non-evaporating and non-foaming. Recom mended for all types of liquid cooled internal combustion engines where one season's use is desired. CONTAINERS: Qt. and gai. tamperproof cans (24 onc-qi. or 6 one-gal. cans in a case); 54-gal. drums. "Zerone" Anti-Rust Anti-Freeze: A methanol-base product designed to give effective and economical anti freeze protection to liquid cooled automotive cooling sys tems. It also contains special rust inhibitors. "Zerone" is a very effective anti-freeze that requires about 25% less product to protect to a given temperature than the same quantity of ethyl alcohol or ethylene glycol. Recom mended for use with normal-operating thermostats (below 160F.). Co n t a in e r s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case); 54-gal. drums. 59 DUP210010852 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS BIOCHEMICALS INSECTICIDES Dairy Cattle Insecticide: Tan wettable powder residual insecticide containing 50% technical methoxychlor. Us e : For dust application to control hornflies on dairy cattle and for fly control in dairy barns and premises. Co n t a in e r s : 1-lb. canisters (24 in a case). "Deenate" 50W DDT Insecticide: A wettable powder containing 50% DDT Technical. Us e : As a spray for control of insect pests of fruits and vegetables as well as certain livestock and buildings. Co n t a in e r s : 3-lb. bags (16 in case), 4-lb. bags (12 in a case), 50-lb. bags. EPN 300 Insecticide: A wettable powder containing 25% ethyl p-nitrophenyl thionobenzene phosphonate as the active ingredient. Us e : As a spray insecticide to control certain mites, scales and other insects such as plum curculio, peach tree borer, orange tortrix, grape berry moth, European corn borer and potato aphid on fruits and vegetables; and as a dust ingredient for boll weevil and certain other cotton insects. Also for use by qualified agencies for control of certain mosquito larvae. Co n t a in e r s : 3-lb. bags (12 in a case). Lead Arsenate Insecticide--"NuRexform" Standard: A poisonous powder (colored pink to comply with insecti cide laws in several states). Us e : For control of codling moth, cankerworm, curculio and most chewing insects feeding on foliage and fruit; for grubproofing turf. Co n t a in e r s ; 1-lb. bags (48 in a case), 3-lb. bags (16 in a case), 4-lb. bags (12 in a case). "Marlate" 50 Methoxychlor Insecticide: A wettable powder containing 50% technical methoxychlor. Us e : For control of insect pests of vegetables, fruits, forage crops and stored grain as well as livestock. Very low toxicity to warm-blooded animals. Co n t a in e r s : 4-lb. bags (12 in a case), 50-lb. bags. "Marlate" 2-MR Methoxychlor Insecticide: Emulsifiable formulation containing 2 pounds technical methoxy chlor per gallon. Us e : For control of certain insect pests of forage crops and certain livestock; in grain storage bins; as a space spray for flies. Co n t a in e r s : 1-gal. cans (6 in a case), 5- and 30-gal. drums. 90% Technical Methoxychlor Oil Concentrate: Offwhite solid. Us e : Sold only to manufacturers or processors for preparation of insecticide formulations. Co n t a in e r s : 100-lb. fiber drums, 50-lb. bags. "NaResfsrm" Standard Lead Arsenate: (See Lead Arsenate Insecticide.) FUNGICIDES Copper-A Compound (Tetra Copper Calcium Oxy chloride): A complex compound containing not less than 45% copper as metallic; finely divided bluish powder. Us e : In control of early and late blight on potatoes and tomatoes, leaf spot on sour cherries and control of blights on celery, etc.; in manufacture of agricultural copper dust. Co n t a in e r s : 6-lb. bags (8 in a case), 50-lb. bags. "Fermate" Ferbam Fungicide: A wettable powder containing ferbam (ferric dimethyldithiocarbamate). Us e : To control plant diseases such as scab on apples and pears, cedar rust on apples, blue mold in tobacco plant beds, leaf spot and brown rot on cherries, black rot on grapes, black spot and rust on roses. Co n t a in e r s : 3-lb. bags (12 in a case), 50-lb. bags (see also under Garden Products, Page 53.) "Fermate" D Ferbam Fungicidal Composition: Black, finely divided powder, containing ferbam (ferric dimethyl dithiocarbamate. Us e : Sold to manufacturers or processors for preparation of fungicide dusts. Co n t a in e r s : 50-lb. bags. "Lignasan" Fungicide: A composition based on ethyl mercury phosphate. Us e : For prevention of surface molds and blue-stain organisms on freshly sawed lumber. Co n t a in e r s : 2-lb. bags (50 in a drum), 125-lb. drums in bulk. "IWanzate" Maneb Fungicide: A wettable powder containing maneb (manganese ethylenebisdithiocarbamate). Us e : To control many fungus diseases of vegetables such as tomatoes, potatoes, celery, cucumbers, lima beans, onions, peppers and spinach; fruit and nut crops such as apricots, peaches, grapes, and almonds; field crops such as sugar beets; ornamentals such as roses. Co n t a in e r s : 3-lb. bags (12 in a case), 4J4_lb. bags (8 in a case), 50-lb. fiber drums (see also under Garden Products, page 63). "Melsan" Fungicide: A composition based on ethyl mercury phosphate and sodium pentachlorophenate. Us e : For prevention of surface molds and blue-stain organisms on freshly sawed lumber. Co n t a in e r s : 150-lb. drums in bulk. "Parzate" Liquid Nabam Fungicide: A solution con taining nabam (disodium ethylenebisdithiocarbamate) to be combined with zinc sulfate in the spray tank. Us e : For control of early and late blights of tomatoes, potatoes, and celery; certain leaf diseases of truck crops and ornamentals. Co n t a in e r s : 5- and 30-gal. drums. "Parzate" Zineb Fungicide: A wettable powder con taining zineb (zinc ethylenebisdithiocarbamate). Us e : To control early and late blights of tomatoes, potatoes, and celery; downy mildew and certain other leaf diseases of many vegetable crops; tobacco blue mold; for summer control of scab, sooty blotch, Brooks spot and black rot onapples. Co n t a in e r s : 3-lb.bags(12 ina case), 50-lb. bags. "Parzate" C Zineb Fungicide: A wettable powder containing zineb (zinc ethylenebisdithiocarbamate). Us e : For the control of fruit russeting and greasy spot on oranges and grapefruit in Florida, Texas, and Louisiana; other uses same as "Parzate" Zineb Fungicide. Co n t a in e r s : 3-lb. bags (16 in a case), 5-lb. bags (10 in a case), and 50-lb. bags. "Parzate" D Zineb Fungicidal Composition: A finely divided powder containing zineb (zinc ethylenebisdithio carbamate). Us e : Sold to manufacturers or processors for preparation of fungicide dusts. Co n t a in e r s : 50-lb. bags. DUP210010853 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS "Sulforon" Wettable Sulfur: Very finely divided sulfur; readily dispersible in water; not less than 97% sulfur; contains a wetting agent. Us e : As a fruit fungicide for control of scab, brown rot, etc. Co n t a in er s : 6-lb. bags (8 in a carton), 50-lb. bags. "Sulforon" X Wettable Sulfur: Extremely finely divided wettable sulfur of 5 microns average particle size. Us e : For control of brown rot, scab and certain other fungus diseases of fruits. Co n t a in e r s : 5-lb. bags (10 in a case), 50-lb. bags. "Thylate" Thiram Fungicide: A wettable powder con taining thiram (tetramethylthiuramdisulfide), off-white in color. Us e : To control certain fungus diseases of apples, peaches, strawberries, celery (in plant beds), and tomatoes. It is particularly useful on varieties of apples susceptible to russeting such as Golden Delicious and on certain red varieties where depth and uniformity of color are desirable. Co n t a in e r s : 5-lb. bags (10 in a case), 50-lb. bags. "Zerlate" Ziram Fungicide: A wettable powder con taining ziram (zinc dimethyldithiocarbamate). Us e : To control certain plant diseases of truck crops, fruits, and nuts. Co n t a in e r s : 3-lb. bags (12 in a case), 50-lb. bags. WEED AND BRUSH KILLERS "Animate'' X Weed and Brush Killer--95% Ammo nium Sulfamate: Us e : A non-selective weed and brush killer particularly effective for control of woody plants. Usually used as a foliage application at 60 lb. per 100 gal. of water for control of most species of brash. May be used dry or in solution for preventing sprout growth from stumps and for killing trees such as blackjack oak and various other weed trees. Co n t a in e r s : 40-lb. drums, 60-lb. bags. "Animate'' Weed and Brush Killer Solution: This product contains 5.6 lb. of "Ammate" X Weed and Brush Killer per gal. For railroad use in tank car lots only. "Dybar'' Fenuron Weed and Brush Killer: Pellets containing 25% 3-phenyl- 1,1-dimethylurea (fenuron). Us e : For control of certain undesirable woody plants, such as oak, birch, locust, maple, pine, poplar and elm on fence rows, drainage ditches, utility and railroad right-of-ways, and other non-cultivated areas; spot treat ment for control of bindweed. CONTAINERS: 10-lb. can isters (4 in a case), 50-lb. bags. "Karmex" DL Diuron Herbicide: A suspension con taining 28% 3-(3,4-dichlorophenyl)-l,l-dimethylurea (diu ron). Us e : For pre-emergence weed control in cotton. Co n t a in e r s : J^-gal. cans (6 in a case). "Karmex" Diuron Weed Killer: A wettable powder containing 80% 3-(3,4-dichlorophenyl)-l,l-dimethylurea (diuron). Us e : Selective weed control in certain crops such as sugar cane, pineapple, caneberries, alfalfa, grapes, cotton and peppermint; also for same nonselective uses as "Telvar" monuron weed killer. CON TAINERS: 2-lb. canisters (6 in a case). "Kioben" Neburon Weed Killer: A wettable powder containing 50% l-n-butyl-3-(3,4-dichlorophenyl)-1methylurea (neburon). USE: Selective weed control in commercial nursery plantings of certain woody orna mental plants. CONTAINERS: "5- and 25-lb. fiber drums. "Telvar" IVionuron Weed Killer: A wettable powder containing 80% 3-(p-chlorophenyl)-l,l-dimethylurea (monuron). Us e : As a non-selective weed killer on sites where bare ground is desired. Controls a wide range of annual and perennial grasses and herbaceous weeds. Recommended for non-cropland areas such as utility, highway, pipeline, and railroad right-of-ways; petroleum tank farms; lumberyards; industrial plant sites; irrigation and drainage ditches and around farm buildings; also for selective control of weed seedlings in certain crops such as asparagus, sugar cane, pine apple, and citrus; and as a spot treatment in cropland to control deep-rooted perennial weeds. CONTAINERS: 2-lb. canisters (6 in a case), 50-lb. bags. "Trysben" 200 Weed Killer: An aqueous solution of the dimethylamine salt of trichlorobenzoic acid, containing 2 pounds of acid equivalent per gallon. Us e : Control of many species of broadleaf weeds (especially deep-rooted perennials) and certain species of woody vines and brush. Co n t a in e r s : 1-gal. cans (4 in a case), 5- and 30-gal. drums. "Zobar" Weed Killer: An aqueous solution of the di methylamine salts of polychlorobenzoic acids, containing 4 pounds of acid equivalent per gallon. Us e: Control of many species of broadleaf weeds (especially deep-rooted perennials) and certain species of woody vines and brush. Co n t a in e r s : 1-gal. cans (4 in a case), 5- and 30-gal. drums. SOIL FUMIGANTS VPM Soil Fumigant: A solution containing sodium methyldithiocarbamate. Us e : For control of certain weeds, soil-borne fungus diseases, nematodes and garden centi pedes as a pre-planting treatment to soil in plant propaga tion beds (ornamentals; vegetables and in certain states, tobacco), in the preparation of new turf areas and destruc tion of old turf prior to re-seeding, and for ornamental plants, food and fiber crops as a pre-planting treatment in the field. Co n t a in e r s : 1-gal. bottles (4 in a case),-5-, 30-gal. drums. SEED DISINFECTANTS "Arasan" 75 Thiram Seed Disinfectant and Pro tectant: Active ingredient--75% thiram (tetramethyl thiuramdisulfide). Formulated for dry treatment of seed, but for special uses it may be applied as a slurry. Us e : As seed treatment to reduce losses from seed decay and damping-off of field and sweet corn, peanuts, sorghum, rice, soybeans, peas, beans, cucurbits and other vegetable crop seeds; grass seed and small-seeded legumes such as alfalfa and clover; as an animal repellent on coniferous seed. Co n t a in er s : %-o z. envelopes, 8-oz. cans (24 in a case), 2-lb. canisters (12 in a case), 25- and 100-lb. drums. 61 DUP210010854 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS "Arasan" Thiram Seed Disinfectant and Protectant: Active ingredient--50% thiram (tetramethylthiuramdisulfide). Us e : Same as "Arasan" 75. Formulated for dry treatment only. Co n t a in e r s : 25- and 100-lb. drums. "Arasan" SF-X Thiram Seed Disinfectant and Pro tectant: Active ingredient--75% thiram (tetramethylthiuramdisulfide); wettable powder for slurry treatment. Us e : For treatment of seeds of same crops for which "Arasan" 75 is recommended, with the exception of onions and conifers. Co n t ain e r s : 5j^-oz. cans (24 in a case), 25and 100-lb. drums. "Ceresan" (New Improved) Seed Disinfectant: Active ingredient--ethyl mercury phosphate. Us e : Particularly effective as a dip treatment for gladiolus corms. May also be used as a dust treatment on the same crops and for the same purposes as "Ceresan" M. Co n t ain e r s : 1-lb. (12 in a case) and 100-lb. drums. "Ceresan" (2%) Seed Disinfectant: Active ingredient --ethyl mercury chloride. Us e : For treatment of cotton, peanuts, and pea seeds to control the numerous seed-borne diseases and to reduce seed decay and check damping-off; and as a short soak treatment for basal rot of narcissus bulbs. Co n t a in e r s : lj^-lb. cans (12 in a case), 75-lb. drums. "Arasan" SF-M Thiram Seed Disinfectant and Pro tectant: Contains 75% thiram (tetramethylthiuramdisul fide) plus 2% methoxychlor for added protection against storage insects; wettable powder for slurry treatment. Us e : Treatment of same crop seeds for which "Arasan" SF-X is recommended. Co n t ain e r s : 25- and 100-lb. drums. "Delsan" A-D Seed Protectant: Active ingredients-- thiram (tetramethylthiuramdisulfide) and dieldrin (hexa- chloroepoxyoctahydro-endo, exo-dimethanonaphthalene). Combination fungicide and insecticide seed treatment for com, peas, beans, cucurbits, rice and sorghum to reduce losses from seed decay, seedling blight, and certain soil insects. For use as a slurry treatment. Co n t ain e r s : 7-oz. "Arasan" 42-S Thiram Seed Disinfectant and Pro cans (24 in a case), 25- and 100-lb. drums. tectant: A stable liquid suspension containing 4 lbs. "Semesan" Seed Disinfectant: Active ingredient-- thiram (tetramethylthiuramdisulfide) per gallon; particu hydroxymercurichlorophenol. Us e : For dust or dip treat larly suited for slurry, dip, and spray application. Us e: For ment to control seed-borne diseases, reduce seed decay, and treatment of seeds of the same crops for which other check damping-off of seedlings of vegetable, flower, and "Arasan" products are recommended; for spray applica certain other crop seeds, bulbs, corms, roots, and tubers. tion to sorghum fields grown for seed to inhibit seed-head Co n t a in e r s : 4-oz. cans (36 in a case); 12-oz. cans (12 in a mold; for application to fruit trees, ornamentals, shrubs case) and 25-lb. pails. :|i and nursery stock as a repellent against rabbits, deer and birds. Co n t ain e r s : 1-gal. drums (4 in a case), 5and 15-gal. drums. "Semesan Bel" Dip Disinfectant: Active ingredients --hydroxymercurinitrophenol and hydroxymercurichloro phenol. Us e : For dip treatment of Irish and sweet potatoes (seed pieces or slips) to protect against decay and control "Ceresan" 75 Liquid Mercurial Seed Disinfectant: certain surface-borne diseases. Co n t a in e r s : 3-oz. cans Active ingredients--ethyl mercury 2,3-dihydroxy propyl (48 in a case), 1-lb. cans (12 in a case), 4-lb. cans (6 in a mercaptide and ethyl mercury acetate. Colors seed red. case), 40-lb. pails. Us e : Undiluted in ready-mix treaters for control of certain seed-borne diseases and to reduce losses from seed decay and damping-off of wheat, oats, barley, rye, sorghum, rice, TURF FUNGICIDES flax and cotton. Co n t a in e r s : 5-, 30-, and 55-gal. drums. "Semesan" Turf Fungicide: Active ingredient--hy "Ceresan" 100 Liquid Mercurial Seed Disinfectant: Active ingredients--same as "Ceresan" 75, but higher strength. Colors seed red. Us e: Undiluted in ready-mix treaters, or diluted with water for use in slurry treaters for the same disease control and crop seed uses for which "Ceresan" 75 is recommended; for control of snow mold droxymercurichlorophenol. Us e : For prevention and con trol of brown patch and other fungus diseases on fine turf of lawns and golf greens. May be used in combination with "Tersan" 75 for broader, more effective disease control and greater safety to turf. Co n t a in e r s : 1^-lb. cans (12 in a case), 25-lb. and 100-lb. drums. of wheat. Co n t ain e r s : 1-, 5-, 30- and 55-gal. drums. "Tersan" 75 Thiram Fungicide: Active ingredient --thiram (tetramethylthiuramdisulfide). Us e: For treat "Ceresan" 200 Liquid Mercurial Seed Disinfectant: Active ingredients--same as "Ceresan" 75 and 100 but higher strength. Colors seed red. Us e : Diluted with water in slurry treaters for the same disease control and crop seed uses for which "Ceresan" 75 and 100 are recom ment of turf to control brown patch and dollar spot; for control of stem rot of sweet potatoes; for control of basal rot and decay of gladiolus bulbs. Co n t a in e r s : 8-oz. cans (24 in a case), 2-lb. bags (8 in a case), 3-lb. bags (12 in a case). mended; for control of snow mold of wheat. Co n t a in e r s : 5-, 30- and 55-gal. drums. "Tersan" OM Thiram-Organic Mercury Turf Fungi cide: Active ingredients--thiram (tetramethylthiuramdi sulfide) and hydroxymercurichlorophenol. A combination "Ceresan" M Seed Disinfectant: Active ingredient-- product utilizing the advantages of both thiram and organic ethyl mercury p-toluene sulfonanilide. Us e : As a dust or as mercury; ready to use formula eliminates spray tank mix a slurry treatment for the same disease control and crop ing of separate products. Us e: For the prevention and seed uses as the "Ceresan" liquid mercurials plus sugar control of large brown patch, dollar spot, copper spot, and beet seed; for control of snow mold of wheat. Co n t a in e r s : certain other diseases on golf greens, grass tennis courts, 14-oz. cans (12 in a case), 3-lb. cans (6 in a case), 40- and 100-lb. drums. lawns and other fine turf. Co n t a in e r s : 3-lb. cans (6 in a case). DUP210010855 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS NITROGEN PRODUCTS Ammonium Sulfate--(NH4)2S04: Light tan crystalline solid; guaranteed analysis not less than 21.0% nitrogen. Us e : In manufacture of mixed fertilizers. Co n t a in e r s : Shipments in car lots in bulk only from Belle, West Virginia. "NuGreen" Fertilizer Compound: Tiny round green pellets, much like buckshot in size and shape, specially treated to maintain free-flowing, non-caking characteristics; contains 45% urea-nitrogen. Us e : As a nitrogen fertilizer for spray application to the foliage of plants or for soil application either direct or in mixed fertilizers. Co n t a in e r s : 80-lb. paper bags. '`NuGreen" L-B Fertilizer Compound: Light tan granular solid specially treated to maintain relatively free-flowing, non-caking characteristics; contains 45% urea-nitrogen, less than 0.2% biuret. Us e : As a low-biuret nitrogen fertilizer for spray application to citrus crops. Co n t a in e r s : 80-lb. paper bags. "Uramite" Fertilizer Compound: Odorless yellow granular solid containing nitrogen principally in the form of methylene ureas; remains free flowing under all con ditions; contains 38% nitrogen, only slightly soluble in water. Us e : As a direct application fertilizer for turf grasses and ornamental plants, or other crops requiring a long period of a continuous and uniform supply of nitrogen. Co n t a in e r s : 25- and 50-lb. paper bags. "Uramite" IVI Fertilizer Compound: Gray-white gran ular solid containing nitrogen principally in the form of methylene ureas; remains free flowing under all conditions; contains 38% nitrogen, only slightly soluble in water. Us e : As a high-quality, long-feeding nitrogen source in specialty mixed fertilizers. Co n t a in e r s : 80-lb. paper bags. "Uramon" Ammonia Liquors: Solutions of crude urea and ammonium sulfate in aqueous ammonia. Nitrogen Content Vapor Pressure (lb./sq. in., 70F.) UAL-B UAL-K UAL-37 UAL-S ..... ..... ... .. ..... 45.5% 40.5% 37.0% 43.5% 22 1.0 2 20 UAL-37 also supplies water-insoluble organic nitrogen. Us e : In manufacture of fertilizers. Co n t a in e r s : Tank cars. NUTRITION AND THERAPY PRODUCTS Diphenylamine Refined Flake Industrial -- (CeH5)2NH: A granular product for use in the preparation of screwworm remedies applied to livestock. Sold only to manufacturers for further compounding. Co n t a in e r s : 100-lb. bags. "Hydan" Feed Supplement: Methionine hydroxy ana logue calcium 90%. Us e : A source of methionine (an essential amino acid) for poultry, dog and livestock feeds. Co n t a in e r s : 50-lb. bags. "Impedex" Sodium Propionate N.F.: White powder containing sodium propionate. Us e : For inhibition of heat ing and mold growth in feeds, and as an aid in the control and prevention of ketosis. Co n t a in e r s : 50-lb. bags. "Two-Sixty-Two" Feed Compound: Free-flowing, non caking granules; contains 42% urea-nitrogen equivalent to 262% crude protein (nitrogenx 6.25). Us e : As an ingredient of feeds for ruminants (dairy cows, beef cattle, sheep), Recommended for use by commercial feed manufacturers only. Co n t a in e r s : 80-lb. bags. MISCELLANEOUS Diethylamine -- Technical -- (CSHS)SNH: For use in manufacture and formulation of pesticides. Co n t a in e r s : 5-, 55-gal. drums, tank cars. Dimethylamine--Anhydrous Technical--(CH3)2NH: For use by manufacturers in formulating weed killers and other pesticides. Co n t a in e r s : 100-lb. cylinders, tank cars, tank trucks. 40% Dimethylamine Solution--(CK3)2NH: For use by manufacturers in formulating 2,4-D and 2,4,5-T weed killers and other pesticides. Co n t a in e r s : 50-gal. drums (nonretumable), tank cars, tank trucks. Emulsifying Agent A: An oil soluble composition de signed for use in preparation of emulsifiable oil formu lations. Co n t a in e r s : 1-gal. cans, 5-gal. drums (nonreturnable). IVI on o met hy la mine-- Anhydrous Technical -- CHs NH2: For use in manufacture and formulation of pesticides. Co n t a in e r s : 100-lb. cylinders, tank cars, tank trucks. 40% Monomethylamine Solution--CH3NH2: For use in manufacture and formulation of pesticides. Co n t a in e r s : 50-gal. drums (nonretumable), tank cars, tank trucks. Spreader-Sticker: An amber colored liquid containing a wetting and sticking agent. Us e : As a spreading and sticking agent for agricultural sprays. Co n t a in e r s : 1-pt. cans (16 in a case), 1-gal. cans (6 in a case), 5-gal. drums (nonretumable). (See also under Garden Products, Page 65.) GARDEN PRODUCTS (Small Package Items for the Home Gardener) Combination Insecticide-Fungicide Products: Floral Dust: Wettable powder for use as a dust or water spray. Us e : For insect and disease control on a wide variety of flowers and ornamentals including roses. Con trols many chewing and sucking insects, and is highly effective against plant diseases such as rose black spot, rusts, powdery mildew and certain leaf spot diseases. Co n t a in e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. 63 DUP210010856 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT BIOCHEMICALS Fruit Tree Spray: Wettable powder designed especially for water spray application. Us e : For all sprays during the growing season on apples, peaches, cherries, pears, plums, quince, strawberries, currants and gooseberries. Controls major insect pests and fungus diseases damaging home fruit plantings. Co n t ain e r s : 14-o z. canisters, 3-lb. bags. Rose Insecticide & Fungicide: Wettable powder for use as a dust or water spray. Us e : Designed especially for roses but effective on most other flowers; controls major fungus diseases of roses and kills a wide range of insect pests, including red spider mites. Co n t ain e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. Rose Spray-Duster: Pressurized sprayer that sprays both liquid insecticides and a dry fungicidal dust. Us e : For insect and disease control on roses. Co n t a in e r s : 12-oz. aerosol cans. Tomato Dust: Wettable powder for use as a dust or water spray. Us e : For control of insect pests and blights commonly attacking tomatoes in home gardens. Co n t a in e r s : 8-oz. squeeze dusters, 2-lb. bags. Vegetable Garden Dust: Wettable powder for use as a dust or water spray. Us e : On all common vegetables. Controls a wide range of insect pests and is highly effective against many fungus diseases, including both early and late blights of tomatoes and potatoes. Co n t a in e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. Fungicides: "Fermate" Ferbam Fungicide: Highly effective disease control agent, safe on a wide range of plants, for water spray application. Us e : For black spot and rust of roses, as well as many diseases of other flowers, vegetables, fruits, berries and tobacco. Co n t a in e r s : 9-oz. canisters, 2-lb. bags. "Manzate" Maneb Fungicide: Wettable powder (light in color) for the control of black spot on roses, blights and other diseases of tomatoes, as well as many fungus diseases of certain vegetables, fruits, and ornamentals. Co n t a in e r s : 5}d2- and 11-oz. jars. Insecticides: Aphid & Mite Spray: Emulsifiable insecticide containing 50% malathion. Us e : To control aphids, red spiders and many other insects on flowers, ornamentals, evergreens, fruits and vegetables. Co n t a in e r s : 1-fl. oz., 4-ft. oz., 1-pt. bottles. 6% Chlordane Dust: Insecticide for control of ants, Japanese beetle grubs, roaches, spiders, chiggers, and many other insect pests of the lawn, garden, soil, and household. Co n t a in e r s : 8-o z. squeeze dusters, 18-oz. canisters, 3-lb. bags. 72% Chlordane Insecticide: Emulsifiable insecticide for use as a liquid spray. Us e : Concentrated form of chlordane for insect control on lawns, flowers, shrubs, and ornamental plants, and as a residual spray around building foundations for the control of termites. CONTAINERS: 8- and 16-fl. oz. bottles. 50% DDT: Wettable powder insecticide for use as a water spray. Us e : Concentrated form of DDT for insect control on many garden and ornamental plants, on lawns, and as residual spray around buildings, CONTAINERS: 15-oz. canisters, 2-lb. bags. Dormant Spray Oil: A highly refined, emulsifiable oil for the control of overwintering forms of certain scales, mites and aphids. Us e : As a prefoliage spray on fruit trees, shade trees, ornamentals anu evergreens. Co n t a in e r s : 1-qt. cans. Garden Insecticide: Emulsifiable insecticide containing 25% methoxychlor and 25% malathion. Us e : For the control of many insects on vegetables, fruits, flowers, ornamentals and evergreens. Also may be used to control flies, mosquitoes, roaches, ants, spiders, crickets, clover mite, and earwigs around dwellings, barns and other out buildings. Co n t a in e r s : 4-, 8-, 16-, 32-oz. bottles, M-gal. jugs. 50% Technical Methoxychlor: Wettable powder in secticide for use as a water spray. Has very low order of toxicity to humans; may be used close to harvest time. Us e : For insect control on garden and ornamental plants; also highly effective as residual spray around buildings. Co n t a in e r s : 12-o z. canisters, 2-lb. bags. Plani Food: Ferro FTE (Fritted Trace Elements): Essential trace elements in anew slowly soluble form. Us e : Soil mineralizer for gardens, lawns and potted plants; also for commercial crop use. Co n t a in e r s : 1-lb. canisters, 5-lb. bags. Soluble Plant Food: High strength (19-22-16) fast-acting plant food for gardens, lawns and house plants. Readily soluble in water; feeds through leaves or roots. Us e : As a foliage spray, transplanting solution, root feeding, grass feeding. Co n t a in e r s : 1-lb. bag, 4-lb. bags, 50-lb. bags. Repellents: Insect Repellent Lotion: Active ingredient--N,N-diethyl-meta-toluamide. Us e : Repels many biting insects such as mosquitoes, chiggers, biting flies, ticks and gnats. For application to skin and clothing. Co n t a in e r : lj^-fl. oz. bottles. Insect Repellent Sprayer: Active ingredient--N,Ndiethyl-meta-toluamide. Pressurized sprayer particularly useful for application to clothing. Us e : For repelling many biting insects including chiggers and ticks where appli cation to outer garments is necessary. Co n t a in e r : 5-oz. aerosol can. Seed Disinfectants: The following are offered in small packages by Garden Products Section. "Arasan" 75 Thiram Seed Disinfectant: (See Page 61). New Improved "Ceresan" Seed Disinfectant: (See Page 62). "Semesan" Seed Disinfectant: (See Page 62). "Semesan Bel" Seed Disinfectant: (SeePage 62). "Tersan" 75 Turf Fungicide: (See Page 62). DUP210010857 INDUSTRIAL AND BiOCHEMiCALS DEPARTMENT BIOCHEMICALS Weed and Brush Killers: "Animate" Weed and Brush Killer: A yellow, crystal line, water soluble solid containing 80% ammonium sulfamate. Us e: For the non-selective kill of undesirable plant growth; the outstanding control for poison ivy, poison oak, poison sumac. Very useful in eradicating vegetation in driveways, walks, tennis courts, etc. Effective for killing brush and certain trees; prevents sprouting of tree stumps. Co n t a in e r s : 2-lb. and 6-lb. bavs. Chickweed Killer: A selective weed killer for use on established lawns. Controls chickweed at any stage of growth. Contains neburon herbicide. 4-oz. package treats 1,000 sq. ft. Co n t a in e r s : 4-o z ., 8-o z. canister. Crabgrass Killer: Contains AMA (amine methyl arsonates), a new highly effective crabgrass control. Rapid acting and effective against seedling or mature crabgrass. 16-oz. covers up to 2,000 sq. ft. Co n t a in e r s : 16-o z ., 32-o z ., 1-gal. bottle. Lawn Weed Killer: Non-volatile 2,4-D amine selective weed killer for application as a water spray. Us e : For killing broad leaf lawn weeds such as dandelion and plantain; also effective against wild onion and certain woody plants such as Japanese honeysuckle and poison ivy. Co n t a in e r s : 8-fl. oz. cans, Lawn Weed Killer No. 2: More concentrated formu lation of 2,4-D amine than above; particularly useful for those having larger-than-average turf areas to maintain. One quart size treats 21,000 sq. ft., about }S acre. Us e: For killing most broad leaf lawn weeds and many woody plants. Co n t ain e r s : 16-o z., 1-qt. and J^-gal. cans. Spray Adjuvant: Spreader-Sticker: A liquid wetting and sticking agent for use in insecticide, fungicide and weed-killing sprays, Co n t a in e r s : 1-fl. oz. cans. Miscellaneous: Tree Wound Dressing: Pressurized sprayer. Us e : For treatment of pruning, grafting, or other wounds of shade trees, fruit trees, ornamentals, roses, and other woody plants. Sets quickly, forming a protective seal. Co n t ain e r s : 12-o z. aerosol cans. Sprayer: For attachment to garden hose. Sprayer features 3 interchangeable nozzles designed to handle all liquid and wettable powder garden chemicals. Has handy cut-off knob and anti-siphon protection. Garden Flip-Duster: Dispenses a fine cloud of dust with just a flip of the wrist. Covers foliage evenly and easily. Snail and Slug Pellets: Pellets absorb ground moisture expanding into an effective pest-attracting mound of bait to control snails and slugs. Co n t a in e r s : 1-lb., 2j^-lb., and 5-lb. box. 65 DUP210010858 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware li rtcn^cc. \v Atlanta 9, Georgia 1261 Spring Street I Charlotte 1, North Carolina 427 West Fourth Street n Chicago 3, Illinois 7 South Dearborn Street Clifton, New Jersey 50 Page Road Palo Alto, California 701 Welch Road Philadelphia 3, Pennsylvania 1616 Walnut Street Rumford 16, Rhode Island 50 North Broadway PLANT: Deepwater, New Jersey TELEPHONE PRospect 4-1000 TRinity 5-5391 FRanklin 5-5561 ANdover 3-7000 PRescott 3-5600 DAvenport 6-7550 Kingsley 5-1950 GEneva 4-6500 PRODUCTS This Division supplies to the consuming industries a "Dekatyl" Dyes: Designates a line of cationic dyes espe complete line of dyes, auxiliaries, textile finishes, surface cially suited for dyeing "Dacron" type 62 and 64 polyester active agents, wetting, dispersing, scouring and emulsifying fiber. agents. It also supplies organic chemical intermediates for f the deodorant, disinfectant, dyes, explosives, fine chemicals, fireworks, insecticide, metal, petroleum, pharmaceutical, photographic, pigment, plastics, resins, rubber chemicals, soap, veterinary chemicals, and miscellaneous organic "Diagen" Dyes: Designates a line of stabilized azoic colors that are used for printing cotton and rayon. They are tinctorially strong and have good fastness in full shades. chemical industries. "Halopont" Pigment Colors: Designates a line of pig ment colors. Used for tinting white paper. DYES "Latyl" Dyes: A group of disperse dyes developed particu Dyes are marketed in dry or wet form, depending on larly for coloration of "Dacron" polyester fiber, on which certain peculiarities or ultimate uses of the individual they have exceptionally good light- and wet-fastness proper | products. The dry dyes are generally finely divided pow ties. ders, although there are colors marketed as small crystals, flakes or grains. The items sold in wet form vary in con : sistency from solutions to thick pastes. "Leucosol" Dyes: Designates a line of vat colors which have been specially prepared for textile printing. Character : Our dyes are sold under specific trademarks, various groups ized by excellent application and fastness properties. or classes of colors being given a distinctive trademark, as : follows: "Lithosol" Dyes and "Lithosol" Acids and Bases: 1 "Acetamine" Dyes: Designates a group of azo disperse Designates lines of dyes and chemicals specially prepared dyes specifically developed for application to acetate and for the manufacture of lakes and organic pigments. | especially suited to the coloration of nylon. "Capracyl" Dyes: Represents a group of neutral-dyeing acid colors that produce the highest possible degree of light fastness on nylon. Also suitable for dyeing wool, particu larly in blends with cellulosic fibers. "Celanthrene" Dyes: Designates a group of anthraquinone disperse dyes designed especially for dyeing ace tate and also suitable for application to nylon. "Lusane" Dyes (Brilliant Blue B): A special dye for cotton, with outstanding brilliancy of shade and light fastness. "Luxol" Dyes: Designates a line of spirit- and lacquer- soluble dyes. Used in lacquers, wood stains, stamp inks, ball point pen inks, etc. "Monastral" Pigments: Designates a type of insoluble "Chromacyl" Dyes: Describes a group of dyes that con pigments, producing extremely bright shades of blue and i tain chromium in the dye molecule. Suitable for wool and green with excellent fastness properties and high tinctorial i nylon, these dyes are characterized by ease of application strength. Used in the lake, wallpaper, paper, textile and | and good fastness. other industries. DUP210010859 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Naphthanil" Dye Bases: Products used in combination with the various "Naphthanil" prepares to form insoluble azo dyes. Prior to coupling the bases must first be diazotized to form the diazo salt. Widely used on cotton and rayon textiles. Oil Colors: Oil-soluble dyes used for a variety of purposes in which the prime requirement is good solubility in oils, waxes and similar materials. Paper Whites: Designates fluorescent white dyes espe cially designed for improving the whiteness or brilliance of white papers. "Ponsol" Dyes: Designates a line of anthraquinone vat dyes. Used for the dyeing and printing of cotton and rayon, and characterized by excellent fastness properties. Under controlled conditions, they can be applied to wool. Also used to a limited extent on certain classes of paper. "Pontachrome" Dyes: Designates a line of colors for wool and nylon. Dyed by forming chromium lakes on the fiber. Used largely on materials such as men's suitings and overcoatings. "Pontacyl" Dyes: Designates a line of acid colors for wool, nylon, silk, and "Orion" acrylic fiber. Dyed in an acid bath. Produce bright shades and are used largely on materials for women's wear, bathing suits, sweater yarns, upholstery fabrics, etc. "Poniamine" Diazo Dyes: Direct dyeing colors. After dyeing, they are diazotized and developed with various "Poixtamine" developers, with resultant improvement in fastness, particularly fastness to washing. Used extensively on cellulosic fabrics which are to be printed subsequently with discharge patterns. "Pontamine" Dyes: Designates a line of colors dyed directly in a water bath containing a salt. Used extensively in the textile industry for dyeing cotton and rayon; also applied on paper and leather. "Pontamine" Fast Dyes: Direct dyeing colors of excep tionally good fastness to light. "Pontamine" Whites: Designates fluorescent whitening agents that produce brilliant optical bleaches having out standing wetfastness properties when applied to cotton and rayon. Also used in soaps, detergents, etc. "Sulfanthrene" Dyes: Designates a line of thioindigoid vat dyes characterized by good fastness properties. Used principally for the dyeing and printing of cotton, rayon and silk. "Sulfogene" Dyes: Designates a line of sulfur colors; dyed from a solution of sodium sulfide. Used extensively on cotton work-clothing fabrics and to a limited extent on ravon and other materials. DYEING AUXILIARIES "Acetamine" Developer--AD Extra: Designates a product used as a developing agent in the application of the diazo type dyes, principally blacks, to acetate fiber. "Alkanol" LN Surface Active Agent: Clear light yellow liquid. Us e : To minimize barre problem when acid dyes are applied to nylon filament fabrics. Anti-Fume S Solution: A product in solution form for use as durable protective agent against atmospheric fading of dyed acetate. Beta Naphthol: Designates a developing agent used in the dyeing of diazo or developed colors. Hydrosulfite Concentrated (Sodium Hydrosulfite): White free flowing powder; hygroscopic; readily soluble in water. Tins product is used as a reducing agent in the dyeing of vat colors and also for the removal of color from previously dyed materials. "Latyl" Carrier A: White powder. Us e: To increase the dyeability of "Dacron" polyester fiber. "Naphthanil" Azoic Compounds: Designates a line of azoic compounds used on cotton and rayon as a prepare prior to combining with the various "Naphthanil" dye bases and diazo colors to form insoluble dyes (See this page). Also combined directly with the diazotized bases to produce organic pigments for the lake and finishes industry. "Pontamine" Developers TN, ZN and MPD: Desig nates products used as developing agents in the application of the diazo types of dyes. Used generally on textile fibers other than wool and acetate. "Roracy!" Dyes: Represents a group of soluble dyes that have good affinity and fastness properties on "Orion" acrylic fiber. They are used with selected acid dyes in many instances. "Rotalin" Dyes: Designates a line of spirit-soluble print ing colors. Used principally in the printing of glassine and other types of paper and cellophane. "Sevron" Dyes: Designates a line of cationic dyes espe cially suited for dyeing "Orion" acrylic fiber, having out standing fastness properties on this fiber. SURFACE ACTIVE AGENTS (Wetting, Dispersing, Scouring and Emulsifying Agents) "Alkanol" B Surface Active Agent: Light creamcolored powder. Us e : As a wetting and dispersing agent, particularly with dyes, and as a surface tension reducing agent in the paper, leather, pigment and metal processing industries. "Alkanol" Crude Solution Surface Active Agent-- Alkylnaphthalene Sodium Sulfonate: Clear light yel low liquid. Us e : As a wetting and dispersing agent. 67 DUP210010860 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION I l;::i !' "Alkanol" DW Solution Surface Active Agent: "Duponol" QC Sodium Salt of Technical Lauryl Clear light yellow liquid. Us e : A detergent with wetting Alcohol Sulfate--Fluid Liquid: Carefully controlled H and dispersing qualities for general use; resistant to hard and standardized to provide a raw material for shampoos I water, acids and alkalies. which allows manufacture from a single product of types which vary from clear liquids to pastes. "Alkanol" S Flakes Surface Active Agent: Light creamcolored powder. Us e : As a dispersing and solubilizing agent. "Duponol" SN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. Clear light yellow liquid. Us e : As a detergent, wetting, dispersing and emulsi "Aikanor" WXfi surface Active Agent: Clear light fying agent with exceptionally high foaming power de yellow liquid. Us e : As a wetting agent with rewetting signed for use in shampoos and hand cleaners. properties. "Duponol" ST Surface Active Agent: Alkylolamine "Alkanol" 189-S Surface Active Agent--Saturated Hydrocarbon Sodium Sulfonate: Light yellow liquid. salt of saturated long chain alcohol sulfate. Light yellow liquid. Us e : Preparation of liquid shampoos. Us e : As a wetting and penetrating agent; retains its activity in hard water, acid and alkaline solutions. "Duponol" WA Dry Surface Active Agent--Flakes: Sodium salt of technical lauryl alcohol sulfate. Light yellow flakes. Dry form of "Duponol" WA Paste. "Duponol" 80 Surface Active Agent: Sodium salt of technical octyl alcohol sulfate. Light yellow liquid. Us e: As a wetting and penetrating agent particularly effective in the presence of high concentrations of electrolytes. "Duponol" WA Paste Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. Viscous white paste. Us e : As a detergent, wetting, dispersing and emulsifying agent in cosmetics, metal, leather, building materials, "Duponol" C Sodium Lauryl Sulfate U. S. P.: White powder. Meets requirements of U. S. P. XIV for sodium paper, pigment and cleaning compound industries, and in shampoos. lauryl sulfate. Us e : As emulsifying and dispersing agent for cosmetic, dental and medical preparations. "Duponol" WAQ Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. Fluid white paste. Us e : More fluid form of "Duponol" WA Paste designed pri ! "Duponol" D Paste Surface Active Agent: Sodium salt marily for shampoos. of unsaturated long chain alcohol sulfate. Yellow paste. "Duponol" WAQE Surface Active Agent: Sodium salt Us e : Powerful scouring, emulsifying, dispersing and wet of technical lauryl alcohol sulfate. Fluid liquid. Us e : ting agent and detergent. Carefully controlled and standardized for use as emulsify ing agent in emulsion polymerization industry. "Duponol" EP Surface Active Agent: Alkylolamine salt of saturated long chain alcohol sulfate. Light yellow viscous liquid. Us e : As a detergent, wetting, dispersing and emulsifying agent having excellent solubility, color stability and foaming properties, particularly suitable for shampoos. "Duponol" G Surface Active Agent: Amine salt of saturated long chain alcohol sulfate. Oil-soluble light yellow paste. Us e : Powerful emulsifying agent for oils and solvents. "Duponol" WAT Surface Active Agent: Alkylolamine salt of long chain alcohol sulfate. Clear yellow viscous liquid. Us e : As a detergent, wetting, dispersing and emulsifying agent of high solubility and good foaming, particularly suitable for shampoos. "Duponol" WS Surface Active Agent: "Duponol" G plus long chain saturated alcohol. Light cream-colored waxy solid. Us e: A wax-soluble emulsifying agent for preparing water-in-oil emulsions. - "Duponol" L-144-WDG Surface Active Agent: Sodium salt of a modified unsaturated long chain alcohol sulfate. Reddish-brown liquid. Us e : Emulsifying in dry cleaning and fungicidal sprays. "Duponol" LS Paste Surface Active Agent: Sodium salt of unsaturated long chain alcohol sulfate. Light yellow fluid paste. Us e : Scouring and emulsifying agent in leather and textile industries. "Duponol" ME Dry Surface Active Agent--Powder: Sodium salt of technical lauryl alcohol sulfate containing minimum electrolyte. White powder. Us e : As emulsifying and dispersing agent in metal cleaning, electroplating, textile and leather processing. "Duponol" OS Surface Active Agent: "Duponol" G plus long chain unsaturated alcohol. Clear yellow oilsoluble liquid. Us e: Very effective emulsifying agent for preparing oil-in-water emulsions. "Duponol" XL Surface Active Agent: Modified long chain alcohol sulfate. Clear light yellow colored liquid. Us e : Shampoo base for high quality clear liquid shampoos. "Petrowet" R Surface Active Agent: Light yellow liquid. A wetting and penetrating agent effective in high concentrations of electrolytes and especially for use in 15% hydrochloric acid for oil-well acidizing. "Petrowet" WN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. Light yellow liquid. Us e : For wetting and penetrating in acid solution. "Zonyl" S-13 Fluorochemical Surfactant: Free acid of fluoroalkyl phosphate. Brown waxy solid. Us e : Chemi cally stable surface active agent. TEXTILE SPECIALTIES "Alkanol" HC Surface Active Agent: Nonionic waxy solid. Us e : As a detergent, dispersing and emulsifying agent. i I i i < ft ?* - * \ '} i DUP210010861 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Alkanol" HCS Surface Active Agent: Nonionic fluid paste. Us e : As a detergent, dispersing and emulsifying agent. Pitch dispersing agent and penetrant in paper pulp production. "Alkanol" HGN Textile Processing Agent: Saturated hydrocarbon sulfonate composition. Clear light yellow liquid. Us e : As a wetting agent for conditioning' and wet twisting of rarn. Possesses limited fungicidal properties. "Alkanol" WXN Surface Active Agent: (See Surface Active Agents, Page 68.) "Aridex" L Concentrated Renewable Water Repel lent: Stable white dispersion. Us e : As a water repellent for textiles. "Aridex" WP Renewable Water Repellent: Stable white dispersion possessing maximum exhausting proper ties on textiles. "Avitex" AD Surface Active Agent: Clear reddishbrown liquid. Us e : As a penetrating agent for textile dyeing and finishing. "Avitex" C Softener: Light cream-colored paste. Us e : As a textile softening and finishing agent primarily for use on cotton; and as paper coating plasticizer. "Avitex" FB Antistatic Developer: Light yellow to brown translucent gel. Us e : As an exhausting agent for "Zelec" DX durable antistatic agent. Produces a soft, dry, non-tacky finish having an excellent antistatic effect. "Avitex" K Durable Softener: Nonionic white paste. Us e : Softener and modifier for resin finishes in cellulosic fiber fabrics. "Avitex" NA Softener: Cationic light tan paste. Us e: For softening and antistatic effects on all fibers. "Avitex" Q Softener: Cationic white paste. Us e : Soften ing cotton and synthetic fiber fabrics alone or with resins. "Avitex" R Softener: Cationic light tan paste. Us e : For softening and antistatic effects on all synthetic fibers. "Avitex" SF Softener: White paste. Us e: As a textile softening and finishing agent giving a less oily hand than "Avitex" C softener. Primarily for use on synthetics. "Avitex" W Softener: White paste. Us e : As a softening and finishing agent on synthetic textiles to obtain a waxy hand. "Avitone" A Softener: A saturated hydrocarbon sodium sulfonate composition resistant to oxidation, discoloration and rancidity. Light tan paste. USE: As a leather finishing agent; softener in paper coatings; cotton finishing agent as a pure finish, or as a softener and plasticizer for starch and thermoplastic resins. "Avitone" AL Softener: Similar to "Avitone" A softener with added lubricity to improve sewability for cotton and synthetics. "Avitone" SR Softener: An anionic hydrocarbon sodium sulfonate type product. Light tan paste. Us e : Softener for textiles particularly where absorbency is desired. "Avitone" T Softener: An anionic hydrocarbon sodium sulfonate type product. Semi-fluid paste. Us e: Softener for toweling and denims and pasting agent for disperse dyes. Results in highly absorbent finishes. "Duponol" D Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Duponol" LS Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Duponol" RA Surface Active Agent: Anionic liquid. Us e: Excellent scouring, emulsifying, dispersing and wetting agent. "Duponol" WA Dry Surface Active Agent--Powder: (See Surface Active Agents, Page 68.) "Duponol" WA Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Hydraphtal" Textile Processing Agent: Light yellow liquid combining solvent and scouring properties. USE: For heavy duty degreasing of textiles and leather. "IWerpentine" Surface Active Agent: Red-brown liquid with good wetting and solvent properties. Us e : As a wet ting and scouring agent in the yarn dyeing and leather industries. "IWerpol" B Surface Active Agent: Yellow liquid. Wetting, penetrating, leveling, dispersing and homoge nizing agent. Us e: As a kier boiling assistant in the textile industry. "IWerpol" C Surface Active Agent: Clear yellow liquid. Cleansing, dispersing, penetrating and emulsifying agent. Us e : As a solvent, penetrant, boiling off and dyeing assistant in the textile and leather industries. "IWerpol" F Surface Active Agent: Clear amber liquid. Us e : As a dyeing assistant particularly for rawstock, beam and package dyeing. Low foaming. "IWethacrol" Lubricant C: Light cream-colored cati onic acidic dispersion. Us e : As boarding lubricant for nylon hosiery. "IWethacrol" Lubricant K: Light cream-colored cati onic acidic dispersion. Us e: As boarding lubricant with softening properties for nylon hosiery. "IWethacrol" FF Resin Dispersion: Light cream-colored acidic dispersion of thermoplastic resin. Us e : As a stiffen ing finish for cellulosic and hydrophobic fibers. 69 DUP210010862 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Methacrol" FNH Resin Dispersion: Light creamcolored acidic dispersion of thermoplastic resin substantive to all fibers. Us e : In finishing low denier nylon hose to impart body. "Zelan" AP Paste Durable Water Repellent: A long chain nitrogen complex. Tan paste. Us e: For mill appli cation, to impart to fabrics water, spot and stain resistance, retained after repeated laundering or dry cleaning. "Methacrol" NH Resin DlspersiomLightcream-colored acidic dispersion of thermoplastic resin substantive to nylon fiber. Us e : In finishing nylon hose to impart snag resistance. "Nalan" RF Durable Water Repellent: Light creamcolored viscous paste dispersion. Us e : Along with thermo setting resins as a softener modifier to obtain improved crease resistance and wash-and-wear properties on cotton fabric. "Zelan" FF Durable Water Repellent: A long chain nitrogen complex. White paste. Us e : For mill application to impart water, spot and stain resistance to heavy pile fabrics, corduroys, etc., retained after repeated laundering or dry cleaning. "Zelec" DP Durable Antistatic Agent: Stable, fluid, milky dispersion. Us e : To reduce static electricity in synthetic fibers and fabrics, remaining effective through repeated launderings with soap. "Neomerpin" N Surface Active Agent--Aromatic Sulfonic Acid: Brown liquid. Us e : As a wetting and penetrating agent for use in acid media by the textile and leather industries. "Ondal" A Oxidizing Agent: White powder. Us e : For one-bath oxidizing and soaping of vat colors in the textile industry. Product BCO Surface Active Agent--Cetyl Betaine:An amphoteric amber liquid showing cationic properties in acidic solutions and anionic properties in alkaline solutions. Us e : As a wetting agent, detergent and dyeing assistant particu larly effective in alkaline peroxide bleaching processes and other operations employing high concentrations of acids or alkalies. Retarder LAN Surface Active Agent: Cationic amber liquid. Us e: In acid and electrolyte solutions; dye retarding and stripping agent primarily for use with azoic colors. "Shirlan" Extra Industrial Fungicide--Technical Salicylanilide: Light cream-colored powder. Us e : As a fungicide for general industrial use where low toxicity to humans is essential. "Zelec" DX Durable Antistatic Agent: Light-colored translucent, viscous paste. Us e : To reduce static electricity in synthetic fibers and fabrics, remaining effective through repeated launderings with soap. "Zelec" NE Non-Durable Antistatic Agent: Ambercolored translucent, viscous paste. Us e : To reduce static electricity in processing synthetic fibers and fabrics. Finish is readily removed by laundering and has no effect on sub sequent finishing or dyeing operations. "Zelec" NK Non-Durable Antistatic Agent: Anionic composition of alcohol phosphates. Amber-colored trans lucent paste. Us e : To reduce static electricity in processing synthetic fibers and fabrics. Finish is readily removed by laundering and has no effect on subsequent finishing or dyeing operations. More oil soluble than "Zelec" NE. "Zeset" Fabric Stabilizer: A clear solution of a chem ical which will react with cellulosic materials. Us e : In finishing textiles and other fibers to impart crease resis tance, dimensional stability and hydrophobic characteristics. "Shirlan" A Industrial Fungicide--Dispersed Sali cylanilide: Cream-colored aqueous dispersion of "Shirlan" Extra. Us e: For imparting mildew resistance to textiles. Particularly designed for use with "Aridex" water repellents. "Shirlan" D Industrial Fungicide--Dispersible Salicyianiiide: Cream-colored powder. Water dispersible form of "Shirlan" Extra. Us e : For. imparting mildew resistance to yam or fabric in sizing or finishing mix. "Sitol" Flakes Oxidizing Agent--Sodium Salt of Nitrobenzene Meta Sulfonic Acid: Cream-colored pow der. Us e : As a protective oxidizing agent in discharge printing. Spinning Lubricant L: Pale yellow liquid. Us e : As a textile spinning lubricant with antistatic properties. LEATHER SPECIALTIES "Duponol" LS Paste Surface Active Agent: (See Surface Active Agents, Page 68.) "Hydraphtal" Textile Processing Agent: (See Textile Specialties, Page 69.) "Merpentine" Surface Active Agent: (See Textile Specialties, Page 69.) "Merpol" C Surface Active Agent: (See Textile Special ties, Page 69.) "Methacrol" LB Resin Dispersion: Anionic alkaline dispersion of unplasticized thermoplastic resin. Light cream-colored liquid. Us e : As a base for seasoning to obtain a hard top finish for leather and leather articles. "Tetralin" Solvent--Tetrahydronaphthalene-- "Methacrol" LBM Resin Dispersion: Anionic alkaline I 1 Ci0Hi2: Water-white liquid. Us e : In the textile, soap and manufactured gas industries, and as a chemical inter dispersion of moderately plasticized thermoplastic resin. Light cream-colored liquid. Us e: As a base for seasoning to mediate. obtain a flexible finish for leather and leather articles. 70 DUP210010863 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Methacrol" LBP Resin Dispersion; Anionic alkaline dispersion of highly plasticized thermoplastic resin. Light cream-colored liquid. Us e : As a base for seasoning to obtain a soft flexible finish for leather and leather articles. "Neomerpin" N Surface Active Agent--Aromatic Sulfonic Acid; (See Textile Specialties, Page 70.) "Zoron" CR Resin Finish: A clear solution of thermo setting resin. Us e : Synthetic tanning assistant to tighten leather grain. "Zoron" TR Polymer Emulsion: Anionic alkaline dis persion of unplasticized thermoplastic resin. Light creamcolored liquid. Us e: As a base for seasoning to obtain a glossy top finish for leather and leather articles. "Tetralin" Solvent--Tetrahydronaphthalene -- Cio Hi2: (See Textile Specialties, Page 70.) "Tyzor" Organic Titanates: A series of esters of ortho titanic acid. Us e : As adhesion primers, binders for high temperature paints, pigment dispersants and moisture scavengers. "Vydax" Fiuorucarboti Teiuirieis: thermally stable, insoluble, nonflammable, dry lubricants and release agents. "Zelcon" C Fabric Conditioner: Cationic fabric softener and conditioner, 100% active, viscous amber fluid. Us e : As the active ingredient in compounded home laundry fabric softeners and conditioners. MISCELLANEOUS SPECIALTIES "Aridex" DCN Renewable Water Repellent: White crystalline paste, soluble in petroleum solvent. Us e : As water repellent particularly after dry cleaning with petroleum solvent. "Decalin" Solvent--Decahydronaphthalene--C,0HiS: Water-white liquid. Us e : As a solvent and as a chemical intermediate. "Duponol" L-142 Surface Active Agent--Fatty Al cohol Sodium Sulfate: Sodium salt of saturated long chain fatty alcohol sulfate. White powder. Us e : To impart emollient effects in cosmetic preparations. "Ocenol" Technical Oleyl Alcohol: Light yellow liquid. Us e : As a chemical intermediate. "Shirlan" Extra Industrial Fungicide--Technical Salicylanilide: (See Textile Specialties, Page 70.) "Zonyl" E-7 Fluoroalkyl Ester: Fluoroalcohol pyromellitate. Amber oil. Us e : Thermally stable fluid-lubricant and power fluid. "Zonyl" E-91 Fluoroalkyl Ester: Fluoroalcohol camphorate. Amber oil. Us e : Thermally stable liquid-lubricant and power fluid. MISCELLANEOUS PRODUCTS MBT (2-Mercaptobenzothiazole): Corrosion inhibitor. Powder form. Oil free. Sodium MBT 50% Solution: A 50% water solution of sodium mercaptobenzothiazole of high purity. Us e : Cor rosion inhibitor for anti-freeze. "Zepar" BP Reducing Agent: White free-flowing granu lar powder readily soluble in water. Us e : Bleaching agent for groundwood pulp. INTERMEDIATES* 5-Acetamido-8-amino-2-naphthalenesulfonic acid Technical 8-Acetamido-5-ainlno-2-iiapliLhalenesulfomc acid Technical 8-Acetamido-2-naphthalenesulfonic acid, magnesium salt Technical p-Aminoacetanilide Technical 5-Amino-2-(p-aminoanilino)benzenesulfonic acid Technical 1- Aminoanthraquinone Technical 2- Aminoanthraquinone Technical N-(5-Amino-l-anthraquinonyI)anthranilic acid Technical N-(8-Amino-l-anthraquinonyl)anthranilic acid Technical 4-Aminoazobenzene-3,4>-disulfonic acid Technical 4-Aminoazobenzene hydrochloride Technical 4-Aminoazobenzene-4'-sulfonic acid Technical Aminoazotoluene Technical *The Intermediates in this list are presented alphabetically by the Du Pont sales names. It should be noted that these sales names are a mixture of the Chemical Abstracts system, the Geneva system and trivial names. There are no cross-references among these systems. 71 DUP210010864 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION l-Amino-4-benzamidoanthraquinone Technical l-Amino-5-benzamidoantbraquinone Technical 6-(p-(p-Aminobenzamido)benzamido)-l-naphthol-3-sulfonic acid Technical 6-(m-Aminobenzamido)-l-naphthol-3-sulfonic acid Technical 6-(p-Aminobenzamido)-l-naphthol-3-sulfonic acid Technical 5-Amino-2(3H)-benzimidazoione Technical p-Aminobenzoic acid Technical l-Amino-4-bromo-2-anthraquinonesulfonic acid, sodium salt Technical l-Amino-4-bromo-2-methylanthraquinone Technical l-Amino-2-bromo-4-p-toluidinoanthraquinone Technical l-Amino-5-chloroanthraquinone Technical 1- Amino-8-chloroanthraquinone Technical 2- Amino-l-chloroanthraquinone Technical 2-Amino-4-chlorophenol Technical l-Amino-2,4--dibromoanthraquinone Technical 5- Amin.o-2-(2,3-dihydro-2-oxo-5-benzimidazolylammo)benzenesulfonic acid Technical p-Aminodiphenylamine Technical l-Ammo-4-hydroxyanthraquinone Technical l-Amino-4-methoxyanthraquxnonc Technical m-(4-Amino-3-methoxyphenylazo)benzenesulfonic acid Technical l-Amino-2-methoxy-4-(p-tolyIsuIfonamido)anthraquinone Technical l-Amino-2-methylanthraquinone Technical l-Amino-2-methyl-4-p-toluidinoanthraquinone Technical l-Aminonaphth(2,3-c) acridine-5,8,14(13H)-trione Technical 4-Aminonaphth(2,3-c) acridine-5,8,14(13H)-trione Technical 6- Amino-l,3-naphthalenedisulfonic acid, disodium salt Technical 7- Amino-l,3-naphthalenedisulfbnic acid, dipotassium salt Technical 4-Amino-l,6(and l,7)-naphthalenedisulfonic acid Technical 7-Amino-l,3,6-naphthalenetrisulfonic acid, disodium salt Technical 4- Amino-l,3,5-naphthalenetrisuIfomc acid, 4,5-sultam, trisodium salt Technical l-Amino-6-naphthol Technical l-Amino-6(and 7)-naphthol Technical l-Amino-7-naphthol Technical 1- Amino-2-naphthol-4-sulfonic acid Technical p-Aminophenol Technical 2- Amino-l -plienol-4-sulfonamide Technical 2-Amino-l-phenol-4-sulfonic acid Technical l-(m-Aminophenyl) -3-methyl-5-pyrazolone hydrochloride Technical 1- (m-Aminophenyl) -5-oxo-2-pyrazuIiiie-3-carboxyIic acid Technical 2- Aminotoluene-5-sulfonic acid, sodium salt Technical 5- Amino-o-toluenesulfonic acid Technical 5-Amino-2-(p-toluidino)benzenesuIfonic acid Technical 4-(4-Amino-m-tolylazo)-m-toluenesulfonic acid Technical Aniline-2,5-disulfonic acid Technical l-Anilino-2-anthraquinonecarboxylic acid Technical l-Anilino-4-hydroxyanthraquinone Technical p-Anilinophcnol Technical o-Anisidine Technical p-Anisidine Technical o-Anisidinomethanesulfonic acid, sodium salt Technical Anthraflavic acid Technical Anthranilic acid Technical Anthra(l,9)pyrazol-6(2H)-one Technical 1,5-Anthraquinonedisulfbnic acid, disodium salt Technical DUP210010865 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION 1-8-Anthraquinonedisulfonic acid, disodium salt Technical 2,6-Anthraqmnonedisulfome acid, disodium salt Technical 1- Anthraquinonesulfonic acid, sodium salt Technical 2- Anthraquinonesulfonic acid, sodium salt Technical N,N'-l,5-Anthraqu.inonylencdianthranilie acid Technical l,l'-(l,5-Anthraquinonylenediiraiiio)dmaph.th(2,3-c) acridine-5,8,14(13H)-trione Technical (l-Anthraquinonyl)-l,2-hydrazinedisulfonic acid, disodium salt Technical Anthrarufin Technical 4',4'"-Azobis-4-biphenyIcarboxylic acid, disodium salt Technical 4-(4-Benzamido-l-anthraqumonylamino) naphth (2,3-c) acridine-5,8,14(13H)-trione Technical l-Benzamido-4-chloroanthraquinone Technical l-Benzamido-5-chloroanthraquinone Technical Benzanilide Technical 7H-Benz(de) anthracen-7-one Technical 0- Benzoylbenzoic acid Technical (3,3'-Bi-7H-benz(de)anthracene) -7,7'-dione Technical (4,4/-Jbi-7H-benz(de)anthracene)-7,7/-dione Technical (l,l'-Binaphthalene)-8,8'-dicarboxylic acid Technical 1.4- Bis(l-anthraquinonylamino)anthraquinone Technical 1.5- Bis(l-anthraquinonylamino) anthraquinone Technical 4,4/-Bis(diethylamino) benzophenone Technical 4,4/-Bis(dimethylamino)benzhydroI Technical 4,4'-Bis(dimcthylamino) benzophenone Technical 1.5- Bis(2,4-dinitrophenoxy)-4,8-dinilroanthraqumone Technical l,4-Bis(2,4,6-triethylanilino) anthraquinone Technical 3- Bromo-7H-benz(de)anthracen-7-one Technical 1- Bromo-4-methylaminoanthraquinone Technical 2- Bromo-3-methylanthraqumone Technical 1- (9-Bromo-7-oxo-7H-benz(de)anthracen-3-ylamino)anthraquinone Technical o-(3-Bromo-p-toluoyl)benzoic acid Technical 2- Bromo-l,3,5-triethylbenzene Technical p-Butylaniline Technical 2-tert-Bhtylanthraquinone Technical N,N/-Carbonylbis(4-methoxymetanilic acid), disodium salt Technical Chicago Acid Technical 4- Chloro-2-aminobenzoic acid Technical 2-Chloro-4-aminotoluene Technical 4-Chloro-2-aminotoluene Technical 6-Chloro-2-aminotoluene Technical m-Chloroaniline Technical 0- Chloroaniline Technical p-Chloroaniline Technical Chloroanilines Mixed C Technical 5- Chloro-o-anisidine Technical 1- Chloroanthraquinone Technical 1- Chloro-2-anthraquinonecarboxylic acid Technical Chlorobenzene Technical 0- (p-Chlorobenzoyl)benzoic acid Technical 2- Chloro-N,N-diethyl-4-nitroanilinc Technical 3- Chlorodiphenylamine Technical 4- Chlorometanilic acid Technical 1- Chloro-2-methylanthraquinone Technical 2- Chloro-4-nitroaniline Technical 4-Chloro-2-nitroaniline Technical DUP210010866 ORGANIC CHEMICALS DEPARTMENT ! DYES AND CHEMICALS DIVISION 4-ChlorO"2-nitroanisole Technical l-Chloro-5-nitroanthraquinone Technical 1- Chloro-8-nitroanthraquinone Technical 4-Chloro-3-nitrobenzenesulfonamide Technical 2- Chloro-5-nitrobenzencsulfonic acid, sodium salt Technical 4-Chloro-2-nitrophenol Technical n . 4-Chloro-2-nitrotolucne Technical 4(and 6) -Chloro-2-nitrotoluenc Technical 6-Chloro-2-nitrotoluene Technical 4-Chlorophthalic acid Technical 6-Chloroquinaldine Technical 6-Chloroquinophthalone Technical 1- (2-Chloro-5-sulfophenyl) -3-mcthyl-5-pyrazolone Technical (4-Chloro-o-tolylmercapto) acetic acid Technical 2- Chloro-p-xylene Technical Chrysazin Technical Cleve's Acid 1,6 Technical Cleve's Acid 1,7 Technical Cleve's Acid Mixed Technical Copper phthalocyanine Technical Copper phthalocyanine, semichloro Technical Copper tetra(4)aminophthalocyanine Technical Copper tetra(4)nitrophthalocyanine Technical Cresidine Technical 8-Cyano-l-naphthalenesulfonic acid, sodium salt Technical Dehydrothio-p-toluidine Technical Dehydrothio-p-toluidinesulfonic acid Technical 1.4- Diaminoanthraquinone Technical . 1.5- Diaminoanthraquinone Technical 2.6- Diaminoanthraquinone Technical 1,5 (and 1,8)-Diaminoanthraquinone Technical 4.8- Diaminoanthrarufin Technical 1.4- Diamino-2,3-dichloroanthraquinone Technical 1.4- Diamino-2,3-dihydroanthraqumone Technical 3.6- Diamino-2,7-dimethylacridine Technical 3,6-Diamino-2,7-dimethylacridine sulfate Technical 4,4/-Diamino-2,2/-st.ilbenedisulfonic acid Technical o-Dianisidine Technical . 1.5- Dibenzamidoanthraquinone Technical 4,5,-Dibenzamido-l,l,-iiJiiiiodianLhraquiiioiie Teclinical N,N-Dibenzylaniline Technical 3.9- Dibromo-7H-benz(de) anthracen-7-one Technical Dibromo-8,16-pyranthrenedione Technical 2.5- Dichloroaniline Technical 3.4- Dichloroaniline Technical 2.5- Dichloroaniline-4-sulfonic acid Technical 1.5- Dichloroanthraquinone Technical 1,8-Dichloroanthraquinonc Technical l,5(and 1,8)-Dichloroanthraquinone Technical 2.6- Dichlorobenzal chloride Technical N,N'-(2,5-Dichloro-3,6-dioxo-p-phenylene)bis(6-(2(3H)-oxo-5-benzimidazolylamimo)metanilic acid) Technical 2.5- Dichloro-4-(3~methyl-5-oxo-2-pyrazolin-l-yl)benzenesulfonic acid Technical 2.6- Dichloro-4-nitroanilme Technical 1,4-Dichloro-2-nitrobenzene Technical ' DUP210010867 DYES AND CHEMICALS DIVISION ORGANIC CHEMICALS DEPARTMENT 3.4-Dichloronitrobenzene Technical 2,6-Dichlorotoluene Technical 2-Diethylarainoethyl methacrylate MS Technical N,N-Diethyl-m-aminophenol Technical IV,N-Diethylaniline Technical N,N-Diethylcyclohexylamine Technical IS',N-Diethylmetanilic acid, sodium salt Technical N,N-Diethyl-I-napiilhyIaxxjiinc Technical N,N-Diethyl-m-toluidine Technical 2.3-Dihydro-l,4-bis(methylamino)anthraquinone Technical 2.3-Dihydroquinizarin Technical Dihydroxyviolanthrone Technical 1.3-Dimethoxybenzene Technical N,N-Dimethylaniline Technical 2,2/-Dimethyl-l,l/-bianthraquinone Technical N,N-Dimethyl-m-toluidine Technical m-Dinitrobenzene 09 Technical Dimtro-(3,3'-bi-7H-benz(de)anthracene) -7,7'-dione Technical 3.5-Dinitrobenzoic acid Technical 2.4-Dinitrochlorobenzene Technical Dinitrochrysazin Technical 4.5-Dinitro-2,7-chrysazindisulfbnic acid, disodium salt Technical 2.4-Dinitro-4/-hydraxydiphenylamine Technical 2.4-Dinitrophenol Technical 4,4/-Dinitro-2,2/-stilbenedisulfonic acid, disodium salt Technical 2.4-Dinitrotoluene Technical Dinitrotoluene Mixture Technical 1.4-Di-p-toluidinoanthraquinone Technical Di-o-tolylguanidine Technical Di-o-tolylthiourea Technical 6-Ethoxy-2-mercaptobenzothiazole Technical 2-Ethoxy-l-naphthylamine Technical 2-Ethoxy-l-nitronaphthalene Technical 3-Ethylamino-p-cresol Technical 3-Ethylaraino-p-toluenesulfonic acid Technical N-Ethylaniline Technical alpha-(N-Ethvlanilino) -m-toluenesulfonic acid Technical N-Ethyl-N-benzylaniline Technical N-Ethyl-N-benzyl-m-toluidine Technical N-Ethyl-alpha-naphthylamine Technical N-Ethyl-m-toluidine Technical N-Ethyl-o-toluidine Technical alpha-(N-Ethyl-m-toluidino)-m-toluenesulfonic acid Technical F Salt Technical Fluoroalcohols Fluorocarbons Formanilide Technical Formaniline Technical o-Formotoluidide Technical G Salt Technical Gamma Acid Technical II Acid Technical Homophthalic acid Technical 1 -Hydroxy-4- (alpha-hydroxy-m-toluidino) anthraquinone Technical DUP210010868 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION N-(7-Hydroxy-l-naphthyl)acetamide Technical l-IIydroxy-4-p-toIuidinoanthraquinone Technical 1,1 '-Iminobis(4-aminoanthraquinone) Technical l,r-Iminobis(4-bcnzamidoanthraquinone) Technical l,T-Iminobis(5-benzamidoanthraquinone) Technical l,l'-[minobis(4-nitroanthraquinone) Technical l,T-Iminodianthraquinonc Technical 1,3-Isoquinolinediol Technical Isoviolanthrone Technical J Acid Technical J Acid Urea Technical Koch. Acid Technical Laurent's Acid Technical 1-Methoxyanthraquinone Technical l-Methoxy-4-nitroanthraquinone Technical 1-Methylaminoanthraquinone Technical N-Methylanilinc Technical 3- (N-Methylanilino)propionitrile Technical 1- (3-Mcthyl-2-anthraquinonylamino)~5-(7-oxo-7H-benz(de)anthracen-3-ylamino)anthraquinone Technical N-Methylcyclohexylaminc Technical Mcthylenebis(2-chloroaniline) Technical p,p'-Methylenebis(N,N-dimethylaniline) Technical N-Methylglucamine Technical 4- Mcthyl-2-nitroanisole Technical 2- Methyl-l-nitroanthraquinone Technical 2,7-Naplithalencdisulfonic acid, disodium salt Technical o-Naphthionic acid Technical alpha-Naphthol Technical Naphthostyril Technical alpha-Naphthylamine Technical (2-Naphthylraercapto) acetic acid Technical Nevile & Winther's Acid Technical 2'-Nitro-p-acetanisididc Technical 3- Nitro-4-aminoanisole Technical 5- IVitro-2-aminoanisoIc Technical 4- Nitro-2-aminophenol Technical 4- Nitro-2-aminotoluene Technical 5- Nitro-2-aminotoluene Technical m-Nitroaniline Technical 4- Nitroaniline-2-sulfonic acid Technical 0- Nitroanisole Technical p-Nitroanisole Technical 1- Nitro-2-anthraquinonecarboxylic acid Technical m-Nitrobenzaldehydc Technical 6- (p-(p-Nitrobenzamido)benzamido)-l-naphthoI-3-suIfonic acid Technical 6-(p-Nitrobenzamido)-l-naphtbol-3-sulfonic acid Technical 5- Nitro-2(3H) -benzimidazolone Technical p-Nitrobenzoic acid Technical 4 -Nitro-4-biphenylcarboxylic acid, sodium salt Technical o-Nitrochlorobenzene Technical p-Nitrochlorobenzene Technical 2- Nitro-p-cresol Technical |> m-Nitroformanilide Technical - : alpha-Nitronaphthalene Technical DUP210010869 DYES AND CHEMICALS DIVISION ORGANIC CHEMICALS DEPARTMENT 7(and 8)-Nitronaphth(l,2)-oxadiazole-5-suIfonic acid Technical p-Nitrooxanilic acid Technical p-Nitrophenetole Technical 0- Nitrophenol Technical p-Nitrophenol Technical 4-Nitro-o-phenylenediamine Technical 1- (m-Nitrophenyl) -3-methyl-o-pyrazolone Technical i-(m-Nitrophenyi) -5-Oxo-2-pyrazoiine-3-carboxyIie acid Technical 4-Nitrophthalimide Technical p-Nitrosodium phenolate Technical p-Nitrosophenol Technical m-Nitrotoluene Technical 0- Nitrotoluene Technical p-Nitrotoluene Technical Nitrotoluenes Mixed o-m-p Technical 4-Nitrotoluene-2-sulfonic acid Technical N-Oxalyl-m-phenylenediamine Technical N-Oxalyl-p-phenylenediamine Technical 6-Oxo-6H-anthr(9,l)isothiazole-3-carboxylic acid Technical 1- (7-Oxo-7H-benz(de)anthracen-3-ylamino)anthraquinone Technical l,l'-(7-Oxo-7H-benz(de)anthracen-3,9-ylenediimino)dianthraquinone Technical Pentachlorobenzenethiol Technical Peri Acid Technical p-Phenetidine Technical m-Phenylenediamine Technical 1.3- Phenylenediamine-4-sulfonic acid Technical N-Phenyl Gamma Acid Technical N-Phenylglycine, potassium(and sodium) salt Technical 2,2'-Phenyliminodiethanol Technical N-Phenyl J Acid Technical l-Phenyl-3-methyl-5~pyrazolone Technical N-Phenyl-alpha-naphthylamine Technical N-Phenyl-beta-naphthylamine Technical N-Phenyl Peri Acid Technical Phthalimide Technical Picric acid NF Picric acid Technical Piperidine Technical Primuline Fusion Mass 220 Technical Primuline Fusion Mass 240 Technical Primuline Fusion Mass 270 Technical Quinaldine Technical Quinizarin Technical 2.4- Quinolinediol Technical Quinophthalone Technical 2R Acid Technical Rhoduline Acid Technical Sarcosine Technical Sodium, metanilate Technical Sodium naphthionate Technical Sodium picramate Technical 0- (p-Sulfobenzoyl) benzoic acid, disodium salt Technical 1- ('p-Sulfophcnyl)-3-methyl-5~pyrazolone Technical Sulfur tetrafluoride Technical DUP210010870 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION :J il Tetrabutyl titanate Technical I !i 1.4.5.8- Tetrachloroanthraquinone Technical II Tetraethylthiuram disulfide Technical Tetraisopropyl titanate Technical 1.4.5.8- Tetrakis(l-anthraquinonylamino)anLhraquinone Technical Tetrakis(2-ethylhexyl) titante Technical Tetrastearyl titanate Technical 3,3'-Thiodi(7H-benz(de)anthracen-7-one) Technical Thio-beta-naphthol Technical o-Tolidine base Technical o-Tolidine hydrochloride Technical m-Toluidine Technical y o-Toluidine Technical p-Toluidine Technical o-(p-Toluoyl)benzoic acid Technical 2.4- Tolylenediamine Technical 2.4- Tolylenediamine-5-sulfonic acid Technical 1,3,5-Triethylbenzene Technical 1.3.3- Trimcthyl A2,cc -indolineacetaldehyde Technical 1.3.3- Trimethyl-2-methyleneindoline Technical Vinyl fluoride MS Technical Violanthrone Technical 2.4- Xylidine Technical 2.5- Xylidine Technical Xylidines Mixed o-m-p Technical i T !r ii |!1 1: DUP210010871 ORGANIC CHEMICALS DEPARTMENT `FREON" PRODUCTS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Chicago 3, Illinois New York 13, New York Paio Alto, California 7 South Dearborn Street 40 Worth Street 701 Welch Road PLANTS: Carneys Point, New Jersey Louisville, Kentucky Bast Chicago, Indiana Antioch, California TELEPHONE PRospect 4-1000 ANdover 3-7000 COrtlandt 7-3965 DAvenport 6-2340 PRODUCTS "Freon" fluorinated hydrocarbon products are readily available for use in refrigeration and air conditioning equip ment as original and replacement charges; for aerosol pro pellent uses; - for blowing agents; for solvents; and for miscellaneous uses. Those interested are requested to con tact our Wilmington or nearest district office for full in formation regarding the products' usage and nearest stocking points. "Freon" fluorinated hydrocarbons are clear and water white; odors of vapors are mild and somewhat ethereal but disappear when mixed with air; nonirritating to the eyes, nose, throat, lungs and skin; nontoxic, nonflammable, non explosive, noncorrosive, stable and inert. "Freon-11'' or "F-ll" Refrigerant, Propellent, Blow ing Agent and Solvent--Trichloromonofiuoromethane--CCI3F: B. P. 74.8F. (23.8C.) at 760 mm. Us e : As a refrigerant in industrial and commercial air conditioning systems; also, in industrial process water and brine cooling to --40F. (--40C.) employing single or multistage centrif ugal type compressors of 100 tons refrigeration capacity and larger. As brine refrigerant in indirect low temperature systems to --150F. (--101.1C.). As blowing agent for rigid and resilient plastic foams. Solutions of "Freon-11" and "Freon-12" are used as propellents for a wide variety of aerosol products. Can be tailored to individual pressure requirements from 1 to 69 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 10-, 25- and 150-lb. cylinders; 100-, 200- and 650-lb. drums; 2,200-lb. tanks, tank trailers, tank cars. "Freon-12" or "F-12" Refrigerant, Propellent and Blowing Agent--Dichlorodifluoromethane--CCI2F2: B. P. --21.6F. (--29.8C.) at 760 mm. Us e : As a refrig erant in both direct and indirect industrial, commercial, household and automotive air conditioning systems; also, in household refrigerators, ice cream cabinets, frozen food cabinets, food locker plants, water coolers, etc., employing reciprocating type compressors ranging in size from frac tional to 800 horsepower. "Freon-12" is also used in house hold refrigerating systems, ice cream and frozen food cab inets employing rotary vane type compressors. "Freon-12" is used in industrial process water and brine cooling to --110"F. (--78.9C.) employing multistage centrifugal type compressors in cascade of 100 tons refrigeration capacity and larger. "Freon-12" is used as a propellent for high pressure aerosols such as those containing insecticides. Also for surface-coating products such as- metallic and pigmented paints and lacquers. Solutions of "Freon-12" with other "Freon" products are used as aerosol propellents for a wide variety of products; also as low temperature solvents. As blowing agent for rigid and resilient plastic foams. Pr e s s u r e--70 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 10--, 25-, 50- and 145-lb. cylinders; 2,000-lb. tanks, tank trailers and tank cars. "Freon-13" or "F-13" Refrigerant--Monochlorotrifluoromethane--CCIF3: B. P. --114.6F. (--81.4C.) at 760 mm. Us e : As a refrigerant in both direct and indirect industrial extremely low temperature cascade systems ranging in size from fractional to 100 horsepower, employ ing reciprocating or rotary compressors; aircraft environ mental test chambers; shrink fit, toughening and hardening of metals; pharmaceutical processing. Pr e s s u r e--459 lb./ sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 5-, 9-, 23and 80-lb. cylinders. "Freon-13Bl" or "F-13B1" Refrigerant and "Freon" FE-1301 Fire Extinguishing Agent--Monobromotrifluoromethane--CBrF3: B. P. -- 72.0F. (--57.8C.) at 760 mm. Us e : As a refrigerant in both direct and indirect industrial low temperature cascade or multiple compres sion systems ranging in size from fractional to 100 horse power, employing reciprocating or rotary compressors; aircraft environmental test chambers; shrink fit, toughen ing and hardening of metals; pharmaceutical processing. As a fire extinguishing agent. Pr e s s u r e --199 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 6-, 10-, 28- and 100-lb. cylinders and 2,000-lb. tanks. "Freon-14" or "F-14" Propellant and Refrigerant Gas--Tetrafluoromethane--CF4: B. P. --198.4F. (--128.0C.)at760mm. Cr it ic a l Te mp er a t u r e :--49.9F. (--45.5C,). Cr it ic a l Pr e s s u r e: 542 lb./sq. in. absolute. Us e : As a refrigerant in extremely low temperature cas cade systems for environmental testing, metal conditioning, pharmaceutical processing, freezing and storage of biologi cal products and other cryogenic applications; direct cool ant for infrared detector cells; an inert propellant gas to operate satellite guidance and stabilization rockets. Co n t a in e r s : 5-, 15- and 50-lb. net weight cylinders as a com pressed gas. 79 DUP210010872 ORGANIC CHEMICALS DEPARTMENT "FREON" PRODUCTS DIVISION "Freon-22" or "F-22" Refrigerant, Plastics Inter "Freon" C-31S Propellent and Dielectric Gas--Octa- mediate, Propellent and Solvent--Monochlorodifluo- fluorocyclobutane-- Cyclic (CF2)4: B.P. 21.1F. romethane--CHCIF2: B. P. --41.4F. (--40.8C.) at 760 (--6.0C.) at 760 mm. Us e : Food grade as propellent it mm. Us e : As a refrigerant in industrial and commercial for aerosol food products. Tasteless and odorless. Pr es low temperature refrigerating systems employing recipro s u r e : 25 psig. at 70F. (21.1C.). Mixture with nitrous cating type compressors; for low temperature refrigerating oxide as propellent for whipped cream dessert topping, salad systems employing centrifugal type compressors. Solutions dressing and other pressurized food products. As propellent of "Freon-22" with "Freon-11" and "Freon-12" are used for flavoring extracts, spices and other food additives. As as propellents for aerosol products requiring special solvent propellent for inhalation pharmaceutical products. Techni- and pressure qualities. Chemical intermediate for plastics g s .1 s.3 dielectric coolant and. heat transfer agent for manufacture. Used as a low temperature solvent in invest transformers, cables, waveguides, and electronic devices. ment casting process for preparation of ceramic molds. Dielectric strength 100 KV per inch at 760 mm. Service Pr e s s u r e--Approximately 122 lb./sq. in. gauge at 70F. temperature at least 250C. Co n t a in e r s : 14-, 28-, and 165- (21.1C.). Co n t a in e r s : 9-, 22-, 25-, 50- and 125-lb. lb. cylinders and 2,200-lb. tanks. cylinders and 1,750-lb. tanks, tank trailers and tank cars. "Freon" BF Solvent--Tetrachlorodifluoroeihane-- CCI2F-CCI2F: B. P. 199.0F. (92.78C.) at 760 mm. F. P. 79F. (26.11C.). Us e : As a solvent. Also, in mixtures with "Freon-113" or "F-113" Refrigerant, Plastics Inter mediate, Solvent and Propellent--Trichlorotrilluoroethane--CCI2FCCIF2: B. P. 117.6F. (47.6C.) at 760 mm. Us e : As a refrigerant in industrial and commercial air conditioning systems; also, in industrial process water and brine cooling to 0F. (--17.8C.) employing four or more stage centrifugal type compressors of 25 tons refrigeration capacity and larger. "Freon-113" is used with other "Freon" compounds as a propellent for aerosol products. As blowing agent for rigid and resilient plastic foams. As a chemical intermediate for plastics manufacture. Co n t a in e r s : 10-, 25- and 150-lb. cylinders; 100-, 150-, 200- and 690-lb. drums; and 2,200-lb. tanks, tank trailers and tank cars. "Freon" MF and "Freon" TF to provide specific boiling points and properties. As a flash point retarder for hydro carbons and some higher boiling solvents. Co n t a in e r s : 10and 20-gallon nonreturnable drums, tank trailers and tank cars. "Freon" MF Solvent--Tricfiloromonofluoromethane --CCI3F: B. P. 74.8F. (23.8C.) at 760mm. F. P. --168F. (--111C.). Us e : As a cleaner for hermetic motor compres sors, oxygen storage tanks, etc. In blends as a cleaner for motion picture and television film, lithographic plates, typewriters, etc. As a flash point retarder for flammable solvents. Also used as an inert, noncorrosive brine and low temperature heat transfer fluid such as in the cold treat ment of brazed stainless steels. Co n t a in e r s : 10-, 20- and 55-gallon nonreturnable drums, tank trailers and tank cars. "Freon-114" or "F-114" Propellent and Refrigerant -- Dichlorotetrafluoroethane--CCIF2CCIF2:B. P. 38.4F. (3.6C.) at 760 mm. Us e : As a refrigerant in fractional horsepower household refrigerating systems and drinking water coolers employing rotary vane type compressors; also, in indirect industrial and commercial air conditioning systems and in industrial process water and brine cooling to --70F. (--56.7C.) employing multistage centrifugal type compressors of 100 tons refrigeration capacity and larger. As high stability heat transfer medium. Solutions of "Freon-114" and "Freon-12" are used as propellents for aerosol products where active ingredients require extreme stability--cosmetics, for example. As blowing agent for rigid and resilient plastic foams. Provide pressure from 12 to 69 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 25- and 150-lb. cylinders and 2,200-lb. tanks, tank cars. "Freon" TF Solvent--Trichlorotrifluoroethane-- CCI2F-CCIF2: B. P. 117.6F. (47.6C.) at 760 mm. F. P. --31F. (--35C.). Us e : As a solvent; for a cold immersion cleaning, as a vapor degreasing solvent, for ultrasonic or combination ultrasonic-vapor degreasing cleaning. Used as a cleaner for precision equipment such as gyroscopes, for mechanical and electrical controls, precision instruments and gauges, motors and generators, electrical and electronic equipment and assemblies, motion picture film, television and magnetic tapes, printed circuits, and as a flash point retarder in. blends. Also^used in extraction processes. Co n t ain e r s : 10-, 20- and 55-gallon nonreturnable drums, tank trailers and tank cars. 1,1-Difluoroetharie--Ethyl idene Fluoride--CH3CHF2: B. P. --12.5F. (--24.8C.) at 760 mm. Us e : As a re frigerant, aerosol propellent and chemical intermediate. Co n t ain e r s : 8-, 16- and 95-lb. cylinders and 1,300-lb. tanks and tank trailers. ; DUP210010873 ORGANIC CHEMICALS DEPARTMENT PETROLEUM CHEMICALS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 SALES OFFICES: Chicago 3, Illinois Cleveland 15, Ohio Houston 2, Texas Los Angeles 17, California New York 20, New York Philadelphia 2, Pennsylvania Pittsburgh 22, Pennsylvania San Francisco 4, California Seattle 3, Washington Tulsa 19, Oklahoma PLANTS: Antioch, California Carneys Point, New Jersey 8 South Michigan Avenue Suite 1116 Midland Building, 101 Prospect Avenue 705 Bank of Commerce Building Suite 425, 612 South Flower Street Suite 550, 45 Rockefeller Plaza 3 Penn Center Plaza Room 751, 1 Gateway Center Room 626, 111 Sutter Street Room 215, 4003 Aurora Avenue 1811 South Baltimore Aver.ue RAndolph 6-8630 MAin 1-3422 CApitol 5-1151 MAdison 4-1354 COlumbus 5-2342 LOcust 8-3531 ATlantic 1-2933 EXbrook 2-1934 MElrose 2-6977 LUther 3-8581 SHIPPING POINTS: TETRAETHYL LEAD COMPOUNDS Amarillo, Texas (1) Antioch, California (3) Beaumont, Texas (2) Bellevue, Ohio (1) Carneys Point, New Jersey (3) Chaison, Texas (1) Chalmette, Louisiana (1) Corpus Christi, Texas (1) Cushing, Oklahoma (1) Cut Bank, Montana (1) East Chicago, Indiana (1) East St. Louis, Illinois (1) El Monte, California (2) Ferndale, Washington (2) Fort Worth, Texas (1) Guthrie, Oklahoma (1) Heavener, Oklahoma (1) Houston, Texas (1) Kansas City, Missouri (1) North Bend (Renova), Pennsylvania (1) Philadelphia, Pennsylvania (1) Rosemont, Minnesota (1) Roxana, Illinois (1) Salt Lake City, Utah (1) Texas City, Texas (1) Toledo, Ohio (1) Torrance, California (1) Westlake, Louisiana (1) Wilmington, Delaware (1) ADDITIVES Billings, Montana Carneys Point, New Jersey Chicago, Illinois La Porte, Texas Kansas City, Missouri Los Angeles, California Mt. Vernon, Washington TETRAMETHYL LEAD COMPOUND "TETRAMIX" ANTIKNOCK COMPOUND Carneys Point, New Jersey (3) (1) Tank Cars (2) Tank Cars and Tank Trucks (3) Tank Cars, Tank Trucks, and Drums PRODUCTS DMF Antistall Additive--Dimethyl FormamideTechnical--HCON(CH3)25 Colorless liquid, readily soluble in gasoline. Us e : In concentrations up to 0.1% to prevent engine stalling during cool humid weather conditions. Co n t a in e r s : 5-, SS-gal. drums, tank trucks, tank cars. Fuel Oil Additive No. 2: A viscous, light amber, ashless liquid. Miscible in No. 2 fuel oil in all proportions. Sp. Gr. 0.90. Us e: At concentrations of 0.003 to 0.02% by weight in household heating and diesel oils to decrease the rate of insoluble residue formation by its antioxidant effect and to reduce filter clogging by its dispersant action. It also has rust preventive properties. Co n t a in e r s : 55-gal. (375-lb.) steel drums. Fuel Oil Additive No. 7: A viscous, light amber, ashless liquid. Miscible in No. 2 fuel oil in all proportions. Sp. Gr. 0.86. Us e : At concentrations of 0.003 to 0.02% by weight in household heating and diesel oils to decrease the rate of insoluble residue formation by its stabilizing effect and to reduce filter clogging by its dispersant action. Co n t a in e r s : 55-gal. (375-lb.) steel drums. Fuel Oil Additive No. 208: A mixture of Fuel Oil Additive No. 2 (92 parts) and Metal Deactivator (8 parts). Us e : Same as Fuel Oil Additive No. 2. Co n t a in e r s : 55-gal. (375-lb.) steel drums. 81 DUP210010874 ORGANIC CHEMICALS DEPARTMENT PETROLEUM CHEMICALS DIVISION r I. Fuel Oil Additive No. 212; A mixture of Fuel Oil Additive Metal Deactivator: A 78% solution of active in No. 2 (88 parts) and Metal Deactivator (12 parts). Us e : gredient in an aromatic solvent. The active ingre Same as Fuel Oil Additive No. 2. Co n t ain e r s : 55-gal. (375-lb.) steel drums. dient is principally N,N'-disalicylidene-l,2-propanediamine [HOC6H4CHNCH2CH(CH3)NCHCg H4OH]. Normally a dark amber liquid; may crystallize during prolonged stor age. Readily soluble in gasolines and other hydrocarbon f Gasoline Antioxidant No. 5: A solution of N-n-butyl-p- oils above 25C. Miscible with Gasoline Antioxidants and aminophenol in alcohols having the following weight Fuel Oil Additive No. 2. Sp. Gr. 1.08. Us e : For improving composition: storage and color stability of petroleum distillates contain ing dissolved copper. It is particularly useful as an adjunct 50% N-n-butyl-p-aminophenol HOCeH4NHC.,H9 to Gasoline Antioxidants and Fuel Oil Additive No. 2. 30% Anhydrous isopropanol (CHs)bCHOH 20% Anhydrous methanol CH3OH Concentration required 0.0002 to 0.002% by weight. Co n t a in e r s : 30-gal. (260-lb.) steel drums. The solution is readily soluble in gasoline in normal use concentrations. The use of benzene or other aromatic solvent is recommended for preparation of concentrated solutions. Sp. Gr. 0.90. Us e : For reducing the formation of gum and precipitation of lead in gasoline. Concentra tion required 0.002 to 0.01% by weight. CONTAINERS: 55-gal. (400-lb.) steel drums. Metal Deactivator No. 2: A 49% solution of the same active ingredient as in Metal Deactivator but having better resistance to crystallization. Us e : Same as Metal De activator. Co n t ain e r s : 30-gal. (250-lb.) steel drums. Metal Deactivator No. 3: A 65% solution of the same active ingredient as in Metal Deactivator but having more favorable crystallization properties. Us e : Same as Metal Deactivator. Co n t a in e r s : 30-gal. (250-lb.) steel drums. Gasoline Antioxidant No. 22: N,N'-Di(sec.-butyl)-pphenylenediamine[C6H4[NHCH(CH3)(CaH5)]2] containing no solvent. A mobile liquid readily soluble in gasoline in all proportions and at all operating temperatures; Sp. Gr. 0.94. Us e : For retarding the formation of gum and precipi tation of lead in gasoline. Concentration required 0.001 to 0.005% by weight. Co n t a in e r s : 55-gal. (425-lb.) steel drums. Antioxidant No. 29--2,6-Di-tertiary butyl-4-methyl phenol--CH3C6H2[C(CH3),],,OH: A light colored, finely divided solid; non-coloring and readily soluble in oils; Sp. Gr. 1.04. Us e: In turbine, transformer and hydraulic oils, waxes and greases to retard oxidation and in gasoline to reduce the formation of gum and precipitation of lead. Concentration required 0.003 to 0.015% by weight. Co n t a in e r s : 100-lb. fiber drums. Petroleum Dyes: Hydrocarbon soluble dyes for impart ing distinctive colors to gasoline and other petroleum products. Co n t a in e r s : 100-lb. fiber drums. Oil Blue A --Essentially 1,4-Di(isopropylamino)anthraquinone Oil Bronze --A blend of Oil Red and Oil Orange Oil Orange --Essentially Phenylazo-2-naphthol Oil Red --Essentially Methyl derivatives of azobenzene-4-azo-2-naphthol Oil Yellow N--Essentially p-Dimethylaminoazobenzene Lube Oil Additive 584: Solution of methacrylate poly mers containing basic nitrogen in light neutral oil. Den sity 7.5 lb. per gal. Us e : To provide detergency for motor oils, particularly under low-temperature, low-power, stopand-go driving conditions, and to improve viscosity index. Concentration required averages 2% and varies somewhat with the properties of the base oil and supple mentary additives used. Co n t a in e r s : 55-gal. (375-lb. net) drums and 4,000-, 6,000- and 8,000-gal. tank cars. Metal Suppressor: Counteracts the pro-oxidant effect of copper or copper alloys and thereby increases stor age stability of gasoline and fuel oil exposed to such surfaces. An amber colored liquid containing 50% active ingredient dissolved in methanol and isopropanol. "Ortholeum" 182 Lubricant Assistant: A mixture of mono- and di-alkyl phosphates (RH2PO,4 and R2HPO4). Light brown viscous liquid; freezing point about 15C.; Sp. Gr. 0.99; miscible with oil in all proportions. Us e : In oils to improve film strength and to impart rust pre ventive properties. Concentrations vary with nature of applications. Co n t ain e r s : 55-gal. (425-lb.) steel drums. "Ortholeum" 300 Grease Stabilizer: Mixture of com plex aromatic amines providing a combination of an anti oxidant and a metal deactivator action. It is a tan-colored, flaked product. Us e : As a stabilizer for greases. Concentra tion required is usually 0.1 to 1.0% by weight. Co n t a in e r s : 175-lb. fiber drums. Phenyl-alpha-naphthylamine--C10H7NHC6H5: Lem on-yellow lumps and irregular pellets up to )4 in. diameter; Sp. Gr. 1.17. Normal concentration--up to 0.5% in oils, up to 1.0% in greases. Us e : As a stabilizer for greases, transformer oils and turbine oils. Phenyl-beta-naphthylamine--CioHrNHCeHs: A yel low-gray powder; Sp. Gr. 1.18. Us e : As a stabilizer for greases and lubricating oils. Concentration--up to 0.5% in greases; up to limit of solubilities in oils. CONTAINERS; 51-gal. (160-lb.) fiber drums. Rust Preventive No. 2: 80% Active ingredient in kero sene. A straw colored liquid. Us e : As an antirust and surface active antistalling agent in petroleum distillates at concentrations up to 0.01%. Co n t a in e r s : 55-gal. (400-lb.) steel drums, tank cars. Tetraethyl Lead Compound--(C2H5)4Pb--Aviation Mix: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; Sp. Gr. 1.74. Us e : In concentrations up to 4.6 cc. TEL per gal. as an antiknock agent for aviation gasolines. Co n t a in e r s : Liter cans, 10- and 55-gal. drums, 3,000- and 6,000-gal. tank cars. DUP210010875 ORGANIC CHEMICALS DEPARTMENT PETROLEUM CHEMICALS DIVISION Tetraethyl Lead Compound--(C2Hs)iPb--Aviation Mix--Dilute Solution: A liquid solution of Aviation Mix, a mixture of 70% xylene and 30% n-heptane; Sp. Gr. 0.96. Us e : For TEL blending of gasolines used in laboratory engine testing. The dilute solution allows greater accuracy in adding small volumes of TEL. Co n t a in e r s : Liter cans. Tetraethyl Lead Compound--(C2H5)4Pb--Motor Mix: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; Sp. Gr. 1.59. Us e : In concentrations up to 4 cc. TEL per gal. as an antiknock agent for motor gasolines. CONTAINERS: Liter cans, 10and 55-gal. drums, 3,000- and 6,000-gal. tank cars. Tetramethyl Lead Compound--(CHi)4 Pb--Motor Mix: A liquid antiknock compound the principal compo nent of which is tetramethyl lead; Sp. Gr. 1.586. Us e : In concentrations up to 2.05 cc. TML per gal. as an antiknock agent for motor gasolines. Co n t a in e r s : Liter cans, 10and 55-gal. drums, 3,000- and 6,000-gal. tank cars. "Tetramix" Antiknock Compound--Motor Mix: A liquid antiknock compound the active component of which is a redistribution mixture of tetraethyl and tetramethyl lead; Sp. Gr. 1.591. Us e : In concentrations up to 2.52 cc. active ingredient per gal. as an antiknock agent for motor gasolines. Co n t a in e r s : Liter cans, 10- and 55-gal. drums, 3,000- and 6,000-gal. tank cars. DUP210010876 PHOTO PRODUCTS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 1 DISTRICT OFFICES AND WAREHOUSES: Atlanta 18, Georgia Boston (Waltham 54), Massachusetts *Chicago 46, Illinois Cleveland 16, Ohio *DalIas 7, Texas *Los Angeles 38, California *Ncw York 11, New York Calls for "Dycril" Philadelphia (Wynnewood), Pa. 1/37 Eiisworth Industrial Drive, N. W. 45 Fourth Avenue 4560 Touhy Avenue, Lincolnwood, Edgebrook Station 20575 Center Ridge Road 1628 Oak Lawn Avenue 7051 Santa Monica Boulevard 248 West 18th Street 40 Worth Street (New York 13) 308 East Lancaster Avenue SVcamore 4-9581 TWinbrook 9-8300 ORchard 5-5500 EDison 1-0375 Riverside 1-1404 Hollywood 9-5147 WAtkins 4-3100 COrtlandt 7-3966 TRinity 8-2700 Warehouse Location. PLANTS: Parlin, New Jersey Rochester, New York . Towanda, Pennsylvania Mail to any of the above locations should be addressed to: E. I. du Pont de Nemours 8s Company (Inc.), Photo Products Department PRODUCTS CAMERA NEGATIVE FILMS T/A NH 5 Mil Base Panchromatic Negative Film: A fine grain panchro matic negative film of wide latitude for interior as well as exterior photography. This film may also be used as a rever sal duplicating film. Available in 16 mm. Type 914A only. "Superior" 4 Negative Film: A super-sensitive panchro matic negative film recommended for both interior and exterior use wherever limited illumination levels prevail. Its special sensitivity and fine grain structure permit the use of reduced apertures where increased depth of field is desired in television and theatrical motion picture pro duction. An excellent film for high speed photography. Available in 16 mm. Type 928A and 35 mm. Type 928B, Rapid Reversal Panchromatic Negative Film: A medi um speed panchromatic negative designed especially for rapid reversal processing at temperatures up to 125F. for use in television newsreel and sports photography. Available in 16 mm. Type 930A only. High Speed Rapid Reversal Panchromatic Negative Film: A high speed panchromatic negative stock designed especially for rapid reversal processing at temperatures up to 125F. for use in television newsreel and sports photog raphy. Available in 16 mm. Type 931A and 35 mm. Type 931B (perforated for high speed cameras only). "Superior" 2 Negative Film: An all purpose panchro matic negative stock for both exterior and interior pro duction work. This film has extremely fine grain, medium speed, and wide latitude. Available in 16 mm. Type 93 6A and 35 mm. Type 936B. "Cronar" 4.5 Mil Base Films for high speed photography, data recording, missile tracking, aerial photography and other non-entertainment uses where thinner, tougher, dimensionally stable, more flexible and longer film lengths are desirable. "Cronar" High Speed Rapid Processing Negative: Same emulsion as 931 Type. Available in 16 mm. Type 131A, 35 mm. Type 13IB, 70 mm. Type 131E, 5.481 in. and 934 in. widths. "Cronar" "Superior" 2 Fine Grain Negative: Same emulsion as 936 Type. Available in 16 mm. Type 136A, 35 mm. Type 136B, 70 mm. Type 136E, 5.481 in. and 934 in- widths. "Cronar" High Contrast Fine Grain Negative: A fine grain panchromatic negative with high red sensitivity especially designed for instrumentation photography where ground to air and air to ground photographic records are desired. Available in 16 mm. Type 140A, 35 mm. Type MOB, 70 mm. Type 140E, 5.481 in. and 934 in. widths. SAFETY DUPLICATING FILMS T/A NH 5 Mil Base Fine Grain Panchromatic Duplicating Negative Film: An exceptionally fine grain, high resolution emulsion designed specifically for making duplicate negatives. Available in 16 mm. Type 908A, 35 mm. Type 908B, and 35 mm. perforated 32 mm. Type 908D. DUP210010877 PHOTO PRODUCTS DEPARTMENT RADIOGRAPHIC PRODUCTS T/A Plain 5.5 Mil Base Fine Grain Master Positive Film: A fine grain positive duplicating film which can be processed in normal positive developer. Gammas in the desirable range of 1.50 to 1.60 are obtained at standard release developing times. This film has sufficient speed to permit printing in the same exposure range as fine grain release positive. Reduction of contrast through emulsion manufacturing techniques rather than through use of yellow dye gives this material a decided speed advantage over dyed materials and much greater resistance to scratches and abrasions. Type 828A is excellent for making low contrast TV release prints. Available in 16 mm. Type 828A and 35 mm. Type 828B. SAFETY DUPLICATING FILMS "Cronar" Plain 4 Mil Base "Cronar" Fine Grain Duplicating Positive: Same emulsion as 828 Type. Ideal for applications where medium contrast duplicates are required without sacrificing printing speed. Used for duplicating aerial negatives where di mensional stability is important such as aerial mapping. Available in 16 mm. Type 228A, 35 mm. Type 228B, 70 mm. Type 228E, and 9l/i. in- widths. SAFETY SOUND RECORDING FILMS T/A NH 5 Mil Base Sound Recording Film: A high speed variable area or variable density recording film. Use positive developer for VA and negative developer for VD work. Available in 16 mm. Type 802A and 35 mm. Type 802B. Fine- Grain VA Sound Recording Film: An improved variable area sound recording film combining fine grain and maximum sensitivity. NH base reduces flare. Available in 35 mm. Type 833B. SAFETY RELEASE POSITIVE FILMS T/A Plain 5.5 Mil Base Release Positive High Speed Film: A high speed posi tive emulsion for special release work where approximately twice regular print positive speed is required. Available in 35 mm. Type 803B. Fine Grain Release Positive Film: For general release work and dubbing prints which require the optimum of picture and sound quality. Image color is blue-black. Inherent noise level is exceptionally low. Emulsion is very hard, with high scratch resistance and is coated on a base of long wearing quality. Available in 16 mm. Type 825A, 35 mm. Type 825B, and 32 mm. Type 825C. SAFETY RELEASE POSITIVE FILMS "Cronar" Plain 4 Mil Base "Cronar" Fine Grain Release Positive Film: Same emulsion as 825 Type. Especially suited for continuous projection prints where long wear and freedom from brittleness and perforation tearing are important. Also used for oscillograph recording. Available in 16 mm. Type 225A, 35 mm. Type 225B and 70 mm. Type 225E. SAFETY SPECIAL PURPOSE FILMS T/A Plain 5.5 Mil Base Title Stock Film: A high speed emulsion used in title cameras for regular title card and special effect work. Produces the sharply defined images required. Specially perforated to yield maximum steadiness in animation cameras. Available in 35 mm. Type 805B only. Fine Grain Low Contrast Positive Film: A low con trast, fine grain emulsion designed for photographing either negative or positive images on television monitor tubes. Available in 16 mm. Type 824A and 35 mm. Type 824B. TV Recordi ng Film: A high speed, low contrast, fine grain emulsion designed for photographing either negative or positive images on television recording tubes. This film is approximately 2lA times faster than Type 824 and may also be used as a reversal duplicating stock. Available in 16 mm. Type 834A and in 35 mm. Type 834B. LEADER STOCKS T/A 5.5 Mil Base Safety Black 5s Leader Stock: For daylight loading rolls, also "A" and "B" roll printing leader. Available in 16 mm. Type T13A and in 35 mm. Type T13B. Safety Exposed Rawstock 5s Leader Stock: For leaders and trailers on motion picture reels and "A" and "B" roll printing inserts. Available in 16 mm. Type T71A and in 35 mm. Type T71B. "Cronar" Plain 4 Mi! Base "Cronar" Polyester Photographic Film--Safety Plain 4s: For developing machines. Available in 16 mm. Type P40A and in 35 mm. Type P40B. "Cronar" Plain 7 Mil Base "Cronar" Polyester Photographic Film--Safety Plain 7s: For developing machines. Available in 16 mm. Type P70A and in 35 mm. Type P70B. RADIOGRAPHIC PRODUCTS MEDICAL X-RAY FILMS DuPont produces four different x-ray film emulsions for the medical field, each emulsion possessing distinct char acteristics to suit it for a special use. Uniformity, abrasion resistance and ability to withstand hot weather processing are inherent in all four emulsions which are coated on blue safety base. "Xtra-Fast" Film, Type 508: A double coated high speed film with maximum contrast for medical radiography with intensifying screens. Available in all standard sizes. Co n t a in e r s : Boxes of 25 sheets interleaved, 100 sheets N.I.F. (Non-Interleaved Film), and Thrift Pak.* "Fluoro-Film" X-ray Film, Type 560: 70 mm. fast blue sensitive film for use with the Fairchild FluoroRecord Camera in photographing the blue fluorescent screen. Available in 100-ft. rolls only. *Five 100 sheet N.I.F. boxes/case 8 x 10 in., 10 x 12 in., and 14 x 17 in. Three 100 sheet N.I.F. boxes/case 11 x 14 in. 85 DUP210010878 PHOTO PRODUCTS DEPARTMENT RADIOGRAPHIC PRODUCTS "Fluoro-Film" X-ray Film, Type 562: 70 mm. fast green sensitive film for use with the Fairchild FluoroRecord Camera in photographing the green fluorescent screen. Available in 100-ft. rolls only. INDUSTRIAL X-RAY FILMS Lightning Fast (LF) Film, Type 555: A very fast, double coated film having the inherent speed necessary for use in the long cone technique. It is also used to advantage with low powered x-ray equipment. Co n t ain e r s : 150 packets per box, 1 film per packet (code 150 LF-1) 150 packets per box, 2 films per packet (code 150 LF-2) I Three special emulsions are produced for the radiography of materials. All are outstanding for their uniformity, abrasion resistance and ability to withstand hot weather processing. No. 3 Bitewing Film, Type 557: An x-ray film coated with emuision on both sides having the same speed as Type 550. For use in recording on one film the coronal two-thirds of both the maxillary and mandibular teeth. Co n t a in e r s : 25 packets per box, 1 film per packet. || Screen Film, Type 504: For all types of industrial work cl where intensifying screens are used. Available in all standard industrial sizes. Co n t a in er s : Boxes of 100 CINE FLUOROGRAPHY FILMS sheets N.I.F. (Non-Interleaved Film). Cine-Ray: 16 mm. and 35 mm. (Type 936) film for use in cine fluorography. Fine Grain Film, Type 506: For direct exposure or ex posure using lead screens. Exceptionally fine grain, with wide exposure adaptability to all x-ray voltages andgamma X-RAY FILM PROCESSING CHEMICALS radiation. Available in all standard industrial sizes. Co n Concentrated Chemicals: Liquid concentrated chem t a in e r s : 100 sheets N.I.F. (Non-Interleaved Film). icals for processing x-ray films. Developer, replenisher and Coated on polyester base. fixer are each supplied in 1- and 5-qt. bottles to make, Very Fine Grain Film, Type 510: For direct exposure or respectively, 1 and 5 gal. of solution. exposure using lead screens. It has the finest grain of the Concentrated Dental Chemicals: Liquid concentrated Industrial Films and is approximately % the speed of Type chemicals for processing dental x-ray films. Developer and 506. Especially suited for critical inspection of light metals fixer are supplied in 24-oz. bottles to make 1 gal. of working such as aluminum, magnesium and their alloys. Also used solution. Developer and fixer are packaged in mailing unit in the 1,000 to 22,000 kv. range. Co n t a in e r s : Boxes of 100 called Twinpack. sheets N.I.F. (Non-Interleaved Film). Coated on polyester base. Powdered Chemicals: "Xtra-Fast" developer and re plenisher, and single powder fixer for processing x-ray Day Pack Films, Types 506, 508 and 510: A 200-ft. roll of 70 mm. x-ray film enclosed in a light-tight paper sleeve films. Supplied in package sizes to mix 1, 5, 20 and 100 gal. of solution. to permit handling and use in daylight. 506 and 510 Types coated on polyester base. STAINLESS INTENSIFYING SCREENS DOSIMETER FILMS Dosimeter riim Packets, Types 544, 552, 558 and 559; Special packets containing two films for measuring radia tion dosage. Carried by personnel subject to exposure to hazardous radiation. Co n t a in e r s : 150 "Pull-A-Tab" packets per box. Dosimeter Film Packet, Type 553: Same as above but containing three films. Dosimeter Film Packets, Types 543 and 545: Same as above but containing one film. DENTAL X-RAY FILMS Dental x-ray films have blue safety base, wide exposure latitude, antiabrasion coating over the emulsion and posi tive dot identification. Both single and double coated films come in the exclusive "Pull-A-Tab" packet, designed for easy opening and handling in the darkroom. Hi-Speed: A fast, stainless screen reproducing definition closely comparable to that of Par Speed, for general medical radiography where extra speed is essential; also excellent for low-powered and portable x-ray units. Par Speed: Standard speed, stainless screen for all general medical radiography. Lightning Special: A very fast, special purpose screen having highest speed throughout medical kilovoltage range. For use where speed is primary requirement. Detail: A special purpose screen designed to reproduce the finest detail possible in screen radiography. Multi-Section Screen Book: A book of seven matched pairs of intensifying screens of different speeds for multi section radiography. Industrial: For high speed industrial radiography. Screen Cleaner: A cleaner specifically formulated for Du Pont Stainless Intensifying Screens. An important bonus benefit for the inhibition of static electricity. Double Coated (D) Film, Type 550: A fast x-ray film FLUOROSCOPIC SCREENS DUP210010879 PHOTO PRODUCTS DEPARTMENT INDUSTRIAL PRODUCTS SCREENS FOR MINIATURE RADIOGRAPHY Type D: Blue fluorescing. Not suited for regular fluoros copy. Used with special blue sensitive film. Supplied with or without cleanable surface. Type E-2: Same spectral emission as Type CB-2 for use with special green sensitive film. Cleanable surface. 30 to 35% more brilliant than Type CB-2. DIFFRACTION FILTERS For obtaining monochromatic x-radiation in diffraction analysis. INDUSTRIAL PRODUCTS INDUSTRIAL AND GRAPHIC ARTS FILMS "Cronar" Clear Base: A clear polyester film for graphic arts. Available in three types: C-41--.004 in. thick, sub-coated on one side. Supplied in rolls only. C-42--.004 in. thick, sub-coated on two sides. Supplied in standard sheet sizes. C-72--.007 in. thick, sub-coated on two sides. Supplied in standard sheet sizes. "Cronar" Ortho A Litho Film: A high contrast, orthochromatic litho emulsion coated on .004 in. and .007 in. polyester film base with a nonhalation backing, This film is quick drying, lies fiat, etches easily and has wide exposure latitude with high resolving power. "Cronar" Ortho B Litho Film: A high contrast, orthochromatic litho emulsion coated on .004 in. and .007 in. polyester film base with a non-halation backing. Available in same sizes and package units as "Cronar" Ortho A. Use of "Cronar" Ortho B is especially recom mended when hardest halftone dot structure is required. "Cronar" Ortho M Litho Film: An extremely high contrast orthochromatic film which has incorporated in its structure a unique emulsion and backing surface treatment that greatly minimizes the common contact problems caused by Newton's rings and trapped air bells. Standard .004 in. polyester film base. . Acetate Ortho Litho Film: An extremely high contrast orthochromatic film on. an acetate base. The special surfaces on both sides greatly minimize Newton's rings and trapped air problems. It is especially suited for those camera and contact jobs which require intricate stripping, cracking and scribing. "Cronar" Clear Back Ortho Film: An extremely high contrast orthochromatic film with a low density anti halation coating designed to permit exposure through the film base. This provides lateral reversal of image directly on camera. The special surfaces on both sides greatly reduce Newton's rings and trapped air problems. Standard .004 in. polyester film base. "Cronar" Pan Litho Film: A high contrast panchromatic litho emulsion on .004 in. polyester film base, especially formulated for color separation work in photolithography and the graphic arts. It has a nonhalation backing and is available in all standard sizes. "Cronar" Commercial Film: A blue sensitive emul sion on .007 in. polyester photographic film base. Retouchable surface. Designed especially for making continuous tone negatives and positives. It is also well suited for posi tives or cancelling masks for color separation techniques. "Cronar" Masking Film: A fast blue sensitive, medium contrast emulsion on .004 in. polyester film base. Retouchable surface. For use in color separation masking, rQnf-Qi'f copyinrt snd Ti62StiVw "Cronar" Pan Masking Film: A fast panchromatic, medium contrast photographic emulsion on polyester film base. Retouchable surface. Designed particularly for color separation masking and duplicating. "Cronar" Direct Positive Clear Film: A high contrast, contact speed film especially suited for making duplicate or laterally reversed neagatives and positives. It is exposed through amber or yellow sheeting. "Cronar" Reflection Color Separation Negative Film: A moderately high contrast, continuous tone panchromatic film on .007 in. polyester base. Retouchable surface. For making separation negatives from reflection copy. "Cronar" Transparency Color Separation Negative Film: A medium contrast panchromatic film on .007 in. polyester base. Retouchable surface. For making separation negatives from color transparencies. "Cronar" Low Gamma Pan Film: An extremely fast, low contrast continuous-tone film on .007 in. polyester base. Retouchable surface. For making separation negatives in color systems where low density range or low gamma is required. Rotofilm: A high contrast orthochromatic emulsion used for making etch resists in the gravure industry. It is coated on a clear safety base with nonhalation backing. The base can be later stripped from the emulsion after laydown on plates or cylinders. Screen .Process Film: A camera speed orthochromatic emulsion on a stable supporting base from which it is stripped to become the actual stencil for silk screen print ing. Film may be exposed in a copy camera, in an enlarger or by contact. Developing Powder A and Activator B are supplied singly or in 1-gal. and 5-gal. combination units. "Cronar" Recording Film: A high speed, blue sensi tive, medium contrast emulsion on .004 in. polyester photo graphic film base. Retouchable surface. Designed for use in high speed oscillographic cameras and related photo recording equipment. Lino-Flex Photorecording Film: A blue sensitive emul sion on "Cronar" polyester photographic film base for use in oscillographic recording equipment. Supplied in Type B (.003 in. thick base) and Type W (.004 in. thick base). ENGINEERING REPRODUCTION FILMS DuPont "Cronaflex" engineering reproduction films are coated on "Cronar" polyester photographic film base. They are extremely durable, flexible, and have a high degree of dimensional stability. "Cronaflex" films handle easily in processing and dry quickly. They lie flat after processing and the special matte surfaces permit sharp, clean pen and pencil lines which will not smear or smudge, yet can be erased easily and cleanly. Three types of "Cronaflex" films are available in sensitized form : 87 DUP210010880 PHOTO PRODUCTS DEPARTMENT TRADE PRODUCTS "Cronaflex" Contact Film: A slow speed photographic film on .004 in. and .007 in. "Cronar", for making contact reproductions. "Cronaflex" Direct Positive Film: A photographic emulsion on .004 in. and .007 in. "Cronar", which will produce positive prints directly from original copy without the need for making intermediate negatives. "Cronaflex" Projection Film: A fast projection speed, orthochromatic film on .004 in. and .007 in. "Cronar". Ideally suited for making work-size prints from miniatur ized negatives. "Cronaflex" Projection Film may also be processed for use as an offset printing plate. "Cronaflex" Drafting Film: The surface and base of this .004 in. "Cronar" polyester film are made in one complete process to provide a drafting material with superior pencil acceptance, erasability, transparency and tear strength. Supplied in all standard roll and sheet sizes. "Cronaflex" U.C. Drafting Film: A drafting film with a fine matte surface which has superior ink acceptability. The special surface also readily accepts pencil. Supplied on .004 in. and .007 in. "Cronar" in all standard roll and sheet sizes. INDUSTRIAL AND GRAPHIC ARTS PAPERS Lino-Writ 3 Photorecording Paper: An orthochromatic paper for oscillographic recording at high writing speeds. Spooled to fit all standard recording oscillographs. Supplied in types: B - Standard Weight W- Ultra Thin Lino-Writ 4 Photorecording Paper: Fastest, thinnest, whitest of all photorecording papers. Spooled in standard sizes. Ultra thin, all rag base. Lino-Writ 5 Direct Writing Photorecording Paper: A high speed photorecording paper designed for use in direct writing oscillographs. Exposure is made with light rich in blue. Development is automatic in low density white light, ( B - Standard Weight ' W- Ultra Thin Seismo-Writ Recording Paper: High contrast and wide latitude with rapid developing and fixing characteristics make this photographic paper suitable for use with field recording machines employed in oil exploration work. Available in sizes to fit all standard seismic recorders. Supplied in types: B - Standard Weight W- Extra Thin Micro-Writ; A fast orthochromatic projection paper with high contrast. Especially designed to make prints from microfilm negatives. Supplied in two types: SPECIAL PRODUCTS B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte "Litho" T Photographic Paper: A transparent water proof stock, nonhalation backed, with a high contrast orthochromatic projection emulsion. It is an economical material for line reproduction work. "Photo-Writ" Photocopy Paper: A paper producing deep, rich blacks and crisp, clean whites with high contrast for photocopy work. Furnished in rolls spooled to fit standard photocopy machines, "Photo-Writ" is available in four types: "DH" Dehydrated Photographic Emulsion Projection speed emulsion supplied in dry form for mixture with water at the point of use. It is designed particularly for photo lofting where large areas which may be sensitized only on location of use. May be used on such surfaces as metal and wood. TESTED CHEMICAL PREPARATIONS Prepared developers and fixers for use with industrial photographic products are also available. A - Thin, Semi-Matte B - Standard Weight, Semi-Matte TRADE PRODUCTS K - Standard Weight, Semi-Gloss i W- Extra Thin, Semi-Matte SHEET FILMS "Cronar" Commercial: A fine grain blue sensitive Lino-Writ 1 Photorecording Paper: A photographic photographic film for general copy and commercial work. paper for general oscillograph recording.. Spooled in sizes It is comparatively slow in speed, clear, of brilliant grada to fit all standard recording oscillographs. Supplied in types: tion, and can be handled under bright red safelight. B - Standard Weight W- Extra Thin Lino-Writ 2 Photorecording Paper: A moderately high speed orthochromatic photographic paper for use in oscillo graphic recording over a wide range of exposures at low, normal and medium frequencies. Types: B - Standard Weight W- Extra Thin "Cronar" Arrow Pan: A high speed film with high red sensitivity which gives greatest speed advantage in incan descent light and excellent color correction by daylight and by daylight fluorescent lighting, "Cronar" High Speed Pan: Combines high speed witn balanced color sensitivity. Suitable for all high speed portrait, commercial and press work, but particularly adaptable for electronic flash lighting. DUP210010881 PHOTO PRODUCTS DEPARTMENT TRADE PRODUCTS "Cronar" X-F Pan: A general purpose film possessing medium speed and correctly balanced sensitivity to all colors. "Cronar" Press: Extremely fast film designed for press photography. Wide exposure and development latitude for optimum response under difficult lighting conditions. All sheet films are coated on nonhalation "Cronar" base. Dii Pont I6-D Film Dov?lop^r and 16-DP. F^pl^nishor Arc recommended for processing of all portrait films. These are available in packaged form. PHOTOGRAPHIC PAPERS Black and White Proof Paper: A developing-out photo graphic paper with full projection speed supplied on a white rough luster medium weight stock which minimizes retouching, scratches and grain. Widely used for making photo murals as well as portrait proofs, it is available in contrast grades 2 and 3. "Varigam" Variable Contrast Photographic Paper: Providing in one emulsion complete contrast control, "Varigam" has projection speed but may easily be adapted to contact printing. Exposure to blue light renders a print of hard gradation and exposure to yellow light, a print of soft gradation. A full range of contrast may be obtained by changing the color of the printing light. Blue, yellow and intermediate colored optical plastic filters are available for easy use. "Varigam" is available in nine surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. R - White Glossy S.W. T - White Glossy D.W. Y - White Silk Texture D.W. High Speed "Varigam" Variable Contrast Photo graphic Paper: Designed especially for the professional photographer, this paper combines the advantages of com plete contrast control with exceptionally high projection speed, approximately twice that of regular "Varigam". High Speed "Varigam" is available in eight single and double weight surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. WPS - White Water Resistant Semi-Matte S.W. "Varilour" Variable Contrast Photographic Paper: A fast projection paper designed for mass production use. The contrast of "Varilour" can be raised or lowered to produce prints of uniform high quality from negatives which vary widely in contrast. This paper will produce warm black prints and will tone well in conventional direct polysulfide toners as well as in bleach and redevel opment toners. Surfaces available are: DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. Y - White Silk Texture D.W. "Velour Black" Photographic Projection Paper: An enlarging paper noted for high speed in exposure and re markable fidelity to negative scale as well as simplicity in handling. "Velour Black" is made in four degrees of con trast for all uses in portrait, commercial, industrial and illustrative photography as well as photofinishing. It is furnished in the following surfaces: A - White Semi-Matte S.W. Grades 1, 2, 3, 4 AL - White Semi-Matte Document W. Grades 2, 3 B - White Semi-Matte D.W. Grades 1, 2, 3 BT - White Semi-Gloss D.W. Grades 2, 3 DL - Velvet Grain Natural White Luster D.W. Grades 1, 2, 3, 4 DS - Velvet Grain Natural White High Luster D.W. Grades 2, 3 R - White Glossy S.W. Grades 1, 2, 3, 4 T - White Glossy D.W. Grades 1, 2, 3, 4 Y - White Silk Texture D.W. Grades 1, 2. 3 Warmtone Photographic Projection Paper: An en larging paper which yields images of a warm brown color. Although designed for projection prints, it is adapted easily to contact printing by reducing the intensity of the printing light. Available in six surfaces, double weight only. DDL - Natural White Rough Luster D.W. DL - Velvet Grain Natural White Luster D.W. DLW - Velvet Grain White Luster D.W. DS - Velvet Grain Natural White High Luster DW. Y - Natural White Silk Texture D.W. ZL - Artweave, Natural White Rough Cloth Texture D.W. Standard formulas for projection papers are DuPont 53-D and 55-D Developers obtainable in ready-to-use form. DuPont 18-F Universal Fixer is recommended. SPECIAL PRODUCTS "Adlux" Photographic Film for Transparencies: A transparent safety base film coated on both sides with "Velour Black" photographic projection paper emulsion in which a diffusing medium has been incorporated. Used in making prints for viewing by transmitted light. "Cronapaque" Print Film: A white semi-opaque film for making prints that can be viewed by either reflected or transmitted light. It has a high speed variable contrast emulsion on .007 in. "Cronar" polyester photographic film base and yields crisp, rich black continuous tone prints from negatives of widely varying contrasts. 89 DUP210010882 PHOTO PRODUCTS DEPARTMENT LUMINESCENT CHEMICAL PRODUCTS Plastic Filters for Use with "Varigam" and "Varilour" Variable Contrast Photographic Papers: Mounted plastic filters, supplied in one size only, consist of a lYi in. square black plastic frame with a numbered tab and a 2}^g in. circular optical plastic filter aperture. Sets of five and ten filters are available, packaged in a red plastic box. A black, molded plastic filter holder which attaches to enlarger lens barrel and a simplified instruction form which contains a filter selection chart are included with the Basic (5-A) and Complete (10-C) sets. Individual mounted filters and unmounted sheets of filter material are also supplied on special order. S-55X Safelight: An orange-brown color safelight which is satisfactory for all sensitized papers, both enlarging and contact including "Varigam". It combines maximum safety from light fog with maximum eye comfort. Prints viewed by this light during processing show a quality comparable to that under white light inspection. TESTED CHEMICAL PREPARATIONS Chemical preparations include developers and fixers for papers and films and "B-B" Developer Additive for blueblack tones and for extending the life of developers. These are available in easy-to-use packages. LUMINESCENT CHEMICAL PRODUCTS FLUORESCENT AND PHOSPHORESCENT CHEMICALS Luminescent Chemicals (Phosphors) are available for: Fo c u s in g Pl a t e s f o r Ul t r a v io l e t Mic r o s c o p y : A green fluorescing zinc silicate which responds to 2537 A.U. ultraviolet light, coated on glass. Sc r e e n s f o r El e c t r o n Mic r o s c o p e s Mis c e l l a n e o u s Us e s : Also prepared to supply miscel laneous phosphors to meet individual requirements. PRINTING PLATE PRODUCTS "Dycril" Photopolymer Printing Plates: A photo sensitive plastic bonded to various metal supports. Ex posure to an ultraviolet light source renders exposed areas insoluble to a subsequent mild alkaline washout solution so that a relief image of the exposed pattern remains. Depth of image is dependent on the thickness of the photosensitive plastic layer. There are seven types available: Type 25 --.008 in. steel backing yielding .010 in. relief depth. Image area of 24 x 28 in. on 28 x 30 in. steel support. Total thickness approximately .025 in. Type 30 --.012 in. steel backing yielding .012 in. relief depth. Image area of 24 x 28 in. on 28 x 30 in. steel support. Total thickness approximately .030 in. Type 50 --.012 in. steel backing yielding relief depth of .030 in. Available 18 x 24 in. size. Total thickness approximately .050 in. Type 60 --.012 in. steel backing yielding relief depth of .040 in. Available 18 x 24 in. size. Total thickness approximately .060 in. Type 152--.105 in. aluminum backing yielding a relief depth of .040 in. Available 18 x 24 in. size. Total thickness approximately .152 in. Type 180--.133 in. aluminum backing yielding a relief depth of .040 in. Available 18 x 24 in., and 20 x 24 in. size. Total thickness approxi mately .180 in. Type 240--.193 in. aluminum backing yielding a relief depth of .040 in. Available 18 x 24 in. size. Total thickness approximately .240 in. MISCELLANEOUS PRODUCTS Photographic Sponges DUP210010883 PIGMENTS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware BRANCH OFFICES: Atlanta 12, Georgia Boston (Malden 48), Massachusetts Chicago 6, Illinois Cincinnati 6, Ohio Cleveland 20, Ohio Detroit 35, Michigan Houston 27, Texas New York 1, New York Pasadena, California Philadelphia 3, Pennsylvania Portland 9, Oregon San Francisco 24, California 225 Moore Street, S. E. 359 Washington Street Room 1711, 20 North Wacker Drive 2330 Victory Parkway 11900 Shaker Boulevard 13000 West Seven Mile Road 3202 Weslayan Avenue 1027 Empire State Building, 350 Fifth Avenue 22-25 Meade Building, 325 North Lake Avenue 910 Architects Building, 117 South Seventeenth Street 1238 N. W. Glisan Street 1485 Bayshore Boulevard TELEPHONE PRospect 4-1000 JAckson 5-4557 DAvenport 2-8080 ANdover 3-7000 AVon 1-2343 LOngacre 1-1060 UNiversity 4-1963 MOhawk 6-0161 LOngacre 3-6400 MUrray 1-7431 LOcust 6-2080 CApitol 2-6012 JUniper 5-9231 PLANTS: WAREHOUSES: Baltimore, Maryland Brevard, North Carolina Edge Moor, Delaware Highland, Florida Atlanta, Georgia Baltimore, Maryland Chicago, Illinois Cleveland, Ohio Dallas, Texas Detroit, Michigan Edge Moor, Delaware Houston, Texas Indianapolis, Indiana Jackson, Mississippi Johnsonville, Tennessee Kankakee, Illinois Kansas City, Missouri Lewiston, Idaho Johnsonville, Tennessee Newark, New Jersey Newport, Delaware Trail Ridge, Florida Lockland, Ohio Los Angeles, California Louisville, Kentucky Malden, Massachusetts Minneapolis, Minnesota Memphis, Tennessee Newark, New Jersey New Orleans, Louisiana Newport, Delaware Philadelphia, Pennsylvania Portland, Oregon San Francisco, California Seattle, Washington Wilmington, Delaware PRODUCTS PIGMENT COLORS Finely divided colored chemical pigments of organic and inorganic types in dry and paste forms. Many hues in each of the following broad classifications are available to the pigment consuming industries: Alkali Resistant Reds--"Naphthanil" Diazo Pigments Arylide Reds and Maroons--"Naphthanil" Diazo Pig ments "Auric" Ferric Oxide, Hydrated--Brown Basic Zinc Chromate Benzidine Yellows Chrome Oranges Chrome Yellow Pigments Copper Maroon "Dalamar" Azo Yellow "Duol" Carmine Lithol Pigment Durable Nonbleeding Reds and Maroons--Precipitated Diazo Pigments Ferric Oxide, Hydrated (See "Auric" Ferric Oxide, Hydrated--Brown) Green-Gold--Durable Organic Yellow Hansa Yellows Indanthrone Blues Lithol Rubine Red 91 DUP210010884 PIGMENTS DEPARTMENT Molybdate Oranges "Monastral" Pigments--Phthalocyanine, Blue "Monastral" Pigments--Phthalocyanine, Green "Monastral" Pigments--Reds and Violet Organic Oranges--Diazo Pigments Phosphomolybdic Acid Colors--Basic Dye Complex Phosphotungstic Acid Colors--Basic Dye Complex n:------- *- r'-d Pigment Scarlet Platinum-Violet--Durable Shading Pigment "Rimapo" Lightfast Blue and Green Pigments Toluidine Reds "Watchung" Red Pigments--Precipitated Diazo Pig ments Water Dispersible Colors--Organic and Inorganic Zinc Yellow--Basic Zinc Potassium Chromate Us e : As coloring or compounding materials in paints, lacquers, enamels, printing inks, leather, linoleum, floor tile, coated fabrics, plastics, rubber, fancy coated paper and wall paper. TITANIUM PIGMENTS "Ti-Pure" Titanium Dioxide is available in two types, one in which the titanium dioxide is in the rutile form (as indicated by the suffix "R") and the other in which it is in the anatase form. Rutile types of pigment show 20-40% greater tinting strength and opacity than the anatase types. "Ti-Pure" R Titanium Dioxide Rutile (Titanium Oxide)--Ti02: A fine, dry, white powder; Sp. Gr. 4.2; in dex of refraction 2.71. Available in various grades with distinctive properties. Us e : In paints, linoleum, lacquers, paper, leather, inks, rubber and plastics as a pigment. Co n t a in e r s : 50-Ib. paper bags. "Ti-Pure" Titanium Dioxide Anatase (Titanium Oxide)--Ti02: A fine, dry, white powder; Sp. Gr. 3.88; index of refraction 2.53. Available in various grades with distinctive properties. Us e : Similar to "Ti-Pure" R. CON TAINERS: 50-lb. paper bags. "Ti-Pure" VG Titanium Dioxide (Titanium Oxide) --Ti02: A free flowing type of dry powder developed especially for use in vitreous enamels for iron and steel and the general ceramic field. "Ti-Pure" VG is not a pigment grade but a coarse particle size product falling mainly be tween 80 and 325 mesh. Co n t a in e r s : 50-lb. paper bags. "Ti-Cal" R Titanium Calcium Pigment Rutile: A fine, white powder available in various grades with dis tinctive properties; Sp. Gr. 3.25; approximate analysis is 30% Ti02 and 70% CaS04. Us e : In flat paints, architec tural finishes, gloss paints and enamels. Co n t a in e r s : 50-lb. paper bags. SPECIALTY PRODUCTS "Tipersul" Fibrous Potassium Titanate: Crystalline fibers 1 micron in diameter melting at 2500F. Useful to 2200F. Us e : High temperature thermal, acoustical and electrical insulations; filter media. FORMS: Lumps, blocks and loose fibers. (Sold only through Wilmington Office.) Coiumbium Metal--Cb: A ductile metal possessing low thermal neutron cross-section and high melting point. Us e : Structural material in nuclear reactors and as a base for high temperature alloys. Fo r ms : Ingots and mill products of coiumbium and its alloys. (Sold only through Wilmington Office.) Silicon, Hyperpure--Si: Semiconductor grades and Solar Cell grade. Us e : In electronics industry for transis tors, diodes, rectifiers and solar batteries. (Sold only through Wilmington Office.) Titanium Metal--Ti: Alight, strong, corrosion resistant metal. Us e : Structural metal and alloy ingredient. Fo r m: Sponge metal. (Sold only through Wilmington Office.) DUP210010885 POLYCHEMICALS DEPARTMENT GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES: Boston 10, Massachusetts Chicago 46 lllincis Detroit 35, Michigan Los Angeles 58, California New York 1, New York Philadelphia 3, Pennsylvania 140 Federal Street HAncock 6-1711 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) ORchard 5-1010 13000 West Seven Mile Road UNiversity 4-1963 2930 East 44th Street LUdlow 2-6464 Empire State Building, 350 Fifth Avenue LOngacre 3-6400 1616 Walnut Street Kingsley 6-4600 PLANTS: Orange, Texas Parkersburg, West Virginia Victoria, Texas PRODUCTS Acrylic Resin: (See "Lucite" Acrylic Resin, this page.) "Alathon" Polyethylene Resin: Translucent white gran ular material. In the finished form it is flexible, extremely tough even at very low temperatures, unaffected by moisture and aging, resistant to most chemicals, solvents and greases. Among the lightest of all plastic materials, it has excellent dielectric properties and is tasteless, odorless and nontoxic. As a film it has very low water permeability but is more permeable to carbon dioxide, oxygen and other gases. Many compositions are available. Base resins differ in density, melt index, and molecular weight distribution. In addition, there are additives to improve surface proper ' ties, appearance or weatherability. Resins offered for elec trical applications contain antioxidant to maintain the excellent low power factor and dielectric constant during processing. Us es : Extruded into film and coatings for pack aging, building construction, agricultural mulching, and lining of irrigation ditches and ponds; extruded onto wire and cable for insulation and jacketing and into pipe for conveying cold water, corrosive chemicals, and food prod ucts; injection molded into thousands of objects ranging from ink cartridges for ballpoint pens to garbage cans of 23-gal. capacity; blow molded into squeeze bottles, jars, and hollow shapes; thermoformed from heavy sheet into con tainers, trays, housings, etc. Co n t a in e r s : 50-lb. paper bags, 1,500-lb. nonreturnable corrugated containers, 10,000lb. returnable collapsible rubber containers, 2,000-lb. unit loads (50-lb. bags), 100,000-lb. bulk car. Brushes: (See Plastics Products Division, Page 95.) "Butacite" Polyvinyl Butyral Resin (Sheeting): Soft pliable sheeting. Extremely flexible and tough over a wide range of temperatures and moisture conditions. In lami nated safety glass, it is highly resistant to heat, light and moisture, also holds broken pieces of glass together under impact. Available in colorless, gradient band tinted, and in several transparent colors. Us e : Automotive safety glass, bullet resistant glass, shatter resistant glazings for aircraft, safety shields for television; architectural applications requiring safety, glare control, or special color effects. CONTAINERS: 750-ft. rolls in fiber tubes, or palletized car tons. Combs: (See Plastics Products Division, Page 95.) "Delrin" Acetal Resin--(-OCHj-)n: Thermoplastic in form of cylindrical pellets. Supplied in two basic composi tions--500 series general purpose injection molding resins and 150 series general purpose extrusion resins. Supplied in, natural (white) or number of standard colors. Molded or extruded articles have remarkable combination of chemical and physical properties: High strength and stiff ness combined with toughness and resilience over wide temperature range; good dimensional stability in presence of moisture; high heat distortion temperature; excellent resistance to all types of organic solvents; excellent bearing characteristics and good abrasion resistance. Lik e l y Us e s : Injection molded articles for automotive parts such as interior hardware, bushings and bearings for suspension and steering linkages, squirrel cage blowers, gears, instru ment clusters, fuel pump and carburetor parts; electrical components. Pump impellers, housings and cover plates, showerheads, cutlery handles, tumblers, pen parts, appli ance gears, combs, and aerosol containers; extruded articles and shapes include tubing, coated wire, sheeting, blow molded aerosol bottles. Co n t a in e r s : 50-lb. bags. "Lucite" Acrylic Resin (Molding Powders): Granular solid and cube-cut (for injection molding and extrusion); in minute spherical granules (for compression molding). Available in water-white, transparent and a range of transparent, translucent and opaque colors. Molded and extruded articles have outstanding crystal transparency in clear form; excellent outdoor stability; "light-piping" and "edge-lighting" qualities; lightness of weight; shatter resistance; dimensional stability. Three grades are available for injection molding and extrusion (each with its counter part in forms suitable for compression molding): soft-, medium- and hard-flow. The hard-flow formulation is indicated wherever heat resistance is important in an acrylic part. Us e : Molded by injection or compression for auto motive parts (horn buttons, instrument dials, tail light lenses, indoor and outdoor decorative medallions, re flectors); combs and brush backs; lighting fixtures; pen and pencil barrels; small signs and displays; refrigerator parts (door handles, freezing compartment doors, decorative medallions); costume jewelry; aircraft parts. Extruded for lighting fixtures, large signs, glazing and decorative trim. Co n t ain e r s : 250-lb. fiber drums and 1,000-lb. cartons. 93 DUP210010886 POLYCHEMICALS DEPARTMENT "Lucite" Acrylic Resin Dental Materials: Monomer and granular polymers used in the manufacture of dentures, teeth, crowns and inlays. Methyl Methacrylate Monomer--CH2C(CHs)COOCH9: Water-white, mobile, volatile liquid containing a small amount of polymerization inhibitor. Us e : Primarily in the manufacture of acrylic resins and plastics. Co n t ain e r s : 5-gai. cans, SS-gai. drums, tank trucks, 8000-gai. tank cars. Methacrylate Polymers: [See "Ludte" Acrylic Resin (Methacrylate Polymers), Page 6.] "Monocite" Methacrylate Monomer--H100: A spe cially manufactured grade of methyl methacrylate. Us e : In the manufacture of cast acrylic sheets. CONTAINERS: Insulated tank trucks. Nylon Filaments: (See "Tynex" Nylon Filaments, and Nylon Monofilaments, Page 95.) Nylon Molding Powders: [See "Zytel" Nylon Resin (Molding Powders), Page 95.] Nylon Monofilaments: Monofilaments are available in sizes from 3 to 100 mils. They are produced from a series of nylon polymer compositions varying in physical properties. Typical applications are fishing line, leaders and snelled hooks, woven and non-woven applications, industrial fasteners, air and liquid hose reinforcement materials. Filaments are produced in both round and special cross sectional shapes and colors. Monofilaments are available in 46)^-in. long hanks and cut pieces and in continuous length on spools. Nylon Resins, Soluble: [See "Zytel" Nylon Resin (Solu ble Resin), Page 95.] Polyethylene: (See "Alathon" Polyethylene Resin, Page 93.) "Rulan" Flame-Retardant Plastic for Electrical In sulation: A white granular material specially developed for the electrical industry to meet the need for a good dielectric with flame-retardant characteristics. Does not support combustion or drip when heated above the melting point; electrical properties approach those of "Alathon" polyethylene resin. Us e : Extruded as insulation for many types of wires and cables where flame resistance is impor tant; injection molded into components for radio, television and telephone. Co n t ain e r s : 50-lb. paper bags. "Teflon" FEP-Fluorocarbon Resin (Extrusion and Molding Powder): Clear bead cut pellets suitable for melt extrusion, compression and injection molding. Capable of continuous service up to 200C; outstanding electrical properties; unaffected by virtually all solvents and chemi cals; excellent low temperature toughness; good resistance to adhesion. Us e : Extruded insulation for high frequency and high temperature wire and cable, jacketing and core for coaxial cables, chemical and electrical tubing, molded eiectricai components, such as tube sockets, hermetic seais, connectors, etc., bearings, seals and gaskets. Co n t ain e r s : 5-, 50-, and 100-lb. fiber containers. "Teflon" TFE-Fluorocarbon Resin (Molding Pow ders): White granular powder of small particle size. Un affected by all solvents and practically all chemicals and solvents; outstanding electrical properties; capable of continuous service at 500F. (260C.); good low-tempera ture toughness; unique resistance to adhesion of practically all sticky materials. Us e : Molded, extruded or fabricated from sheet or rod stock as gaskets, packing, mechanical seals, bearings; spacers for coaxial cables, inserts for coaxial connectors, tube sockets; insulation for high frequency, high temperature and high voltage wires and cables; high quality wrapping tape for insulation in motors, generators and conductors; nonadhesive surfaces for bakery rolls, sealing plates and guides on packaging machinery; candy molds. Co n t ain e r s : 5-, 25- and 220-lb. fiber containers. "Teflon" TFE-Fluorocarbon Resin (Extrusion Pow der): White powder, specially manufactured for processing in a modified extrusion technique involving the use of organic extrusion aids. Properties similar to those of "Teflon" molding powder. Us e : Extruded as tape, tubing, wire insulation, and shapes, for use in chemical hose, tubing and lined pipe, gasket stock, insulation on aircraft, and electronic hookup wire, tape wrapped insulation. Co n t ain e r s : 18- and 50-lb. fiber containers. "Teflon" TFE-Fluorocarbon Resin (Aqueous Disper sion): Milky white liquid consisting of minute particles of tetrafluoroethylene resin in water (60% solids), with small amount of wetting agent. Offers fundamentally the same properties as "Teflon" molding powder, with the applica tion advantages of the liquid form. Us e : Cast film for capacitor layer insulation; coated glass fabric and laminates for electrical insulation, non-adhesive sheets, gaskets; impregnated asbestos fabric and braid for gaskets and packing; finishes for non-adhesive coatings; wire enamels for magnet wire; blends with other resins and fillers. Co n t a in e r s : 1-, 5-, and 30-gal. drums. Toilet Articles: (See Plastics Products Division, Page 95.) "Stren" Monofilament Fishing Line Products: Spe cially processed high strength, limp and low elongation monofilaments for use as spin fishing line in breakloads from 2 to 30 pound test and oval casting, surf and trolling lines in breakloads from 10 to 60 pound test. Packaged in plastic boxes containing one or more 50 and 100 yard spools. Product line includes individually packaged knot less tapered leaders and level leader packs in a complete range of sizes. Sold only through authorized agents. Toothbrushes: (See Plastics Products Division, Page 95.) "Tynex" Nylon Filaments, Tapered: Black, with an essentially uniform taper from butt to tip. Us e : Primarily in paintbrushes. Paintbrushes made of "Tynex" can be used with all paints; hold and spread paint well; are easy to clean. Co n t a in e r s : Boxes containing bundles, 25-lb. minimum. DUP210010887 POLYCHEMiCALS DEPARTMENT PLASTICS PRODUCTS DIVISION "Tynex" Nylon Filaments, Level: Natural, black and colors in a wide range of constant diameters. Supplied in paper-wrapped hanks (diameter 2", length 46Jdi''> weight approximately 4 lb.); in cut pieces, paper-wrapped (diameter 2", lengths 1" through 46)^" in increments of 1/16"); and in the form of multistrand ropes on spools and single-strand continuous lengths on spools (returnable metal spools are 12" in diameter and each spool holds ap proximately S lb. net weight of filament). "Tynex" is esistant to abrasion, beat, riiuiatufc, petroleum products, alkalies and dilute acids. Has excellent bend-recovery and flex-life. Us e : Filling for personal, household, maintenance, industrial brushes, and mechani cal street sweeps; filament for wigs, surgical sutures. Co n t ain e r s : Hanks, cut pieces and spools (5) shipped in cartons. Approximate net weight of filament per carton: 25-lb. minimum. "Zytel" Nylon Resin (Molding Powders): Solid gran ular material, cube-cut or chopped; some types available in colors. Several types of nylon are available, varying in heat resistance, solvent resistance and flexibility. In gen eral, articles molded, extruded or machined from nylon are tough over a wide range of temperatures, resistant to abrasion, form-stable at high temperatures, strong in thin sections, light in weight and resistant to chemicals and solvents; and have unusual bearing characteristics. Us e : Injection molded for automotive parts (interior lenses, light-load gears and bearings, fuse holders, insulator bush ings, pedal bushings); coil forms of many types, wireconnectors, strain-relief grommets, battery cases; mechani cal parts for textile machinery, business machines, home movie cameras, electric shavers, household appliances; tumblers, combs, brush backs; sterilizable medical items. Extruded as abrasion-resistant jacketing for electrical wires and cables and for mechanical cables. Co n t ain e r s : 25-lb. "Zytel" Nylon Resins (Special Extrusion Powders): Solid granular material, cube-cut. Properties similar to molding powders, but with still greater toughness and much higher melt viscosity. High melt viscosity permits the extrusion of shapes to accurate dimensions. Us e : Precision-extruded shapes such as rods, tubing, and chan nels of various design; tough transparent film sheeting; coated flexible materials; blown bottles and other contain ers. Co n t a in e r s : 25-lb. cans. "Zytel" Nylon Resin (Soluble Resin): Cream colored cubes. Alcohol-soluble polyamides having an unusual com bination of properties, including toughness, flexibility and high elongation; excellent resistance to most solvents in cluding aliphatic and aromatic hydrocarbons, and to alka lies and oxygen-containing gases. Us e : Coatings for textiles and paper; adhesives; hydrocarbon barrier in fuel cells. Co n t a in e r s : 50-lb. paper bags. PLASTICS PRODUCTS DIVISION GENERAL OFFICE: New York 1, New York Empire State Building, 350 Fifth Avenue PLANT: Leominster, Massachusetts TELEPHONE LOngacre 3-6400 PRODUCTS Combs and Brushes: Combs and brushes of the types listed below, made of "Lucite" acrylic resin, "Zytel" nylon resin, "Delrin" acetal resin and other plastics, are available in various colors and designs, some of which are designpatented. Combs made of nylon are marked DuPont nylon. Combs made of "Delrin" are marked DuPont "Delrin". Some are sold under the trademarks "Lido", "Arlton" and "La Belle" Beautician Combs Women's Dressing Combs Purse-size Combs Purse-size Brush-Combs Purse-size Curl-Combs Purse-size Comb and Brush Sets Men's Combs Men's Pocket Combs, with or without Clips Barbers' Combs Infants' Combs and Brushes Toiletries: Hand brushes, nail brushes, soap boxes, tooth brush holders. Some soap boxes and toothbrush holders made of "Alathon" polyethylene resin. Toothbrushes: A line comprising all the well-known and accepted styles for adults and children, sold under the trademarks "Arlton", "Dentabest", "Paramount" and "Park Avenue", bristled with "Tynex" nylon. Tooth brushes made of nylon are marked Ail nylon. Included are brushes with handles of "Lucite" acrylic resin and of "Zytel" nylon resin. Toothbrushes are packaged in trans parent plastic utility containers and in boxes wrapped in cellophane. Also a line of brushes for dentures. 95 DUP210010888 REMINGTON ARMS COMPANY, !NC. [Stock owned: common 60.17%; preferred 99.55%) GENERAL OFFICE: Bridgeport 2, Connecticut BRANCH OFFICES: Berkeley 2, California Boston Office .Chicago 3, Illinois Cleveland 14, Ohio Dallas 1, Texas Greensboro, North Carolina Jacksonville 7, Florida Memphis 3, Tennessee Minneapolis 3, Minnesota New York Office Pittsburgh 22, Pennsylvania St. Louis 1, Missouri Salt Lake City 11, Utah ,/C}\J oaii a a.uic' fAwixuv 939 Barnum Avenue; Bridgeport 2, Conn. 7 South Dearborn Street 1308 Union Commerce Building 1241 National Building 517 Jefferson Building 1603 Prudential Building, 841 Miami Road 1701 Sterick Building 614 Plymouth Building 939 Barnum Avenue; Bridgeport 2, Conn. 2001 First National Bank Building 1810 Arcade Building 909 Walker Bank Building PLANTS: Bridgeport, Connecticut Findlay, Ohio Ilion, New York TELEPHONE EDison 3-1112 T1-T-7/-ift-mrall A EDison 6-3366 STate 2-7781 PRospect 1-7804 Riverside 2-6908 BRoadway 2-6879 FLanders 9-4252 JAckson 6-5326 FEderal 3-5800 EDison 6-5091 GRant 1-3076 MAin 1-8622 ELgin 5-8686 PRODUCTS REMINGTON SHOTGUNS "Sportsman" 58 Shotgun--Autoloading: 3-shot; 12, 16, 20 gauges. "Power-Matic" gas-operated shotgun. Non recoiling barrel. Us e : For skeet, trap, upland game and water-fowl shooting. Model 11-48 Autoloading Shotgun: 5-shot; made in 12, 16 and 20 gauges (4-shot in 28 and 410 gauges). 3-shot plug supplied without cost. Us e : For upland game and water fowl shooting; small upland game and skeet for 28 gauge and 410 gauge. Model 878 "Automaster" Shotgun--Autoloading: 3 shot; 12 gauge. "Power-Matic" gas-operated shotgun. Non-recoiling barrel. Us e : For upland game and waterfowl shooting. "WIngmaster" Model 870 Shotgun--Pump Action: 5-shot; 12, 16 and 20 gauges; takeduwn; hammerless; solid breech. 3-shot "Vari-Weight" metal plug in 12 gauge only; 3-shot wooden plug furnished in all gauges. Us e : For skeet. trap, upland game and waterfowl shooting. Model 725 Bolt Action Big Game Rifle: Deluxe grade high power rifle made in 222 Remington, 243 Win., 280 Remington, 30-06 Springfield, and 270 Win. calibers; 5-shot capacity. Us e : For medium and big game hunting. "Woodsmaster" Model 742 Rifle--Autoloading--Big Game: "Power-Matic" gas-operated rifle. Hammerless; solid breech; 280 Remington, 30-06 Springfield, and 308 Win. calibers; also available in carbine model in 280 Remington, 308 Win. and 30-06; 5-shot capacity. Us e : For medium and big game hunting. "Gamemaster" Model 760 Rifle--Slide Action--Big Game: High power slide action; hammerless; solid breech; made in 308 Win., 30-06 Springfield, 270 Win., 35 Rem ington, 280 Remington calibers; 5-shot capacity; also available in carbine model in 280 Remington, 308 Win. and 30-06; 5-shot capacity. Us e : For medium and big game hunting. "Targetmaster" Model 510 Rifle--22 Caliber Bolt Action: Single shot; chambered for short, long and long rifle cartridges, without adjustment; higher speed and regular cartridges; open or peep sights. Us e : For small game and target shooting. REMINGTON RIFLES Model 721 Bolt Action Big Game Rifle: Made in 280 Remington, 30-06 Springfield, 300 H 8s H Magnum, and 270 Win. calibers; 5-shot capacity. Us e : For medium and big game hunting. Model 722 Bolt Action Big Game Rifle: Made in 222 Remington (6-shot capacity), 222 Remington Magnum, 243 Win. (6-shot capacity), 244 Remington, 257 Roberts, and 308 Win. calibers; 5-shot capacity. Us e : For varmint, medium and big game hunting. "Scoremaster" Model 511 Rifle--22 Caliber Bolt Action: Box magazine repeater; magazine holds six car tridges; chambered for short, long and long rifle, higher speed and regular cartridges, without adjustment; open or peep sights. Us e : For small game and target shooting. "Sportmaster" Model 512 Rifle--22 Caliber Bolt Action: Chambered for short, long and long rifle, higher speed and regular cartridges, without adjustment; auto matic ejector; holt action repeater; tubular mag&zine holds 22 short, 17 long or 15 long rifle cartridges; Remington receiver peep sight, or open sights. Us e : For small game and target shooting. 96 DUP210010889 REMINGTON ARMS COMPANY, INC. "Match master" Model 513T Rifle--22 Caliber Bolt Action--Target: 7-shot capacity; completely equipped with target sights, target stock, adjustable front swivel and precision sights; moderately priced. Us e : For fine target shooting. Model 514 Single Shot 22 Caliber Bolt Action Rifle: Chambered for short, long and long rifle regular and higher speed cartridges, without adjustment. Open sights. Us e : Small game and target shooting. Model 521T 22 Caliber Bolt Action Rifle: 7-shot capacity. Especially designed for hunting and small bore target shooting. Chambered for long rifle cartridges. Target aperture on the micrometer rear sight is easily removed to give fine hunting peep sight. Adjustable front sling swivel; 1-in. sling of high quality leather; Lyman No. 57RS micrometer rear sight. Weight, about 7 lb. Us e : For small game and target shooting. Model 550 Autoloading 22 Caliber Rifle: Chambered for short, long or long rifle cartridges, without adjustment. Magazine holds 22 short, 17 long or 15 long rifle cartridges. Us e : For small game hunting and shooting galleries. "Speedmaster" Model 552 Autoloading 22 Caliber Rifle: Chambered for short, long and long rifle cartridges, without adjustment. Magazine holds 20 short, 17 long or 15 long rifle cartridges. Us e : For small game hunting and shooting galleries. "Fieldmaster" Model 572 Rifle--22 Caliber Slide Action: Takedown; hammerless; solid breech; slide action; 23-in. barrel; chambered for short, long and long rifle cartridges, without adjustment; magazine holds 20 short, 17 long or 15 long rifle regular or higher speed cartridges. Also available in Lightweight model ("Fieldmaster" Model 572 Lightweight) with choice of Crow-Wing Black or Buckskin Tan colors. Us e : For small game hunting and informal shooting. "Rangemaster" Model 40X Rifle--22 Caliber Bolt Action--Target: Heavy barrel; target stock; adjustable sling swivel; built-in bedding device; weight approximately 12 lb. with heavy barrel, 10 lb. with standard barrel. Us e : For fine target shooting. REMINGTON AMMUNITION Shotgun Shells with "Kleanbore" Priming "Express" Shotgun Shells: Green corrugated shell with Remington Crimp; 10, 12, 16, 20, 28 and 410 gauges (10 and 410 gauges in roll crimp only, not corru gated). Outstanding heavy load, hard hitting, even pattern. Wetproof, long range. Loaded with progressive-burning powder. Also in standard length (2%-in.) Magnum and extra length 3- and 3)4-in. shells. Us e : For maximum long range game shooting. "Express" Buckshot Loads: Green corrugated shell; 12, 16 and 20 gauges. Us e : For deer, black bear, wolf; also guard and police duty. "Express" Slugs--Rifled: Green corrugated shell; 12, 16, 20, 28 and 410 gauges (410 gauge not corrugated). In creased velocity, great striking energy, long range. Im proved bullet-type shape, external rifling and hollow base cause the slug to travel with fine accuracy. Us e : For deer, bear and other big game. "Shur Shot" Shotgun Shells: Red corrugated shell; 12, 16 and 20 gauges. High quality, smokeless powder shell with Remington Flat-Top Crimp. Us e : For medium range game shooting; minimum recoil. 16 and 20 gauges. Smokeless powder. Shot divided into cells by wads between layers to give open patterns with chokebored shotguns. Us e : For short range shooting. Target Loads: Green corrugated shell; 12, 16 and 20 gauges. Us e: For trap and skeet shooting. Remington Rim Fire 22 Caliber Cartridges with "Kleanbore" Priming "Kleanbore" is the original noncorrosive priming in the United States. It will not cause rust or corrosion in rifle or shotgun barrels. "Hi-Speed" Cartridges--22 Caliber Rim Fire: Fine accuracy, longer range, greater energy, higher velocity than standard velocity 22's. Us e : For small game and pest shooting at long ranges. "Rocket" Cartridges--22 Caliber Rim Fire--Short: Special composition bullet; high muzzle velocity. Us e : For informal shooting and medium-range small game hunting. Remington Match 22 Caliber Rim Fire Cartridges: Long rifle ammunition that employs smokeless powder and "Kleanbore" priming. Unexcelled for accuracy. Us e : For match rifle, and match pistol shooting. "Spatter-Less" Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxic; pulverizes on impact. Us e : For gallery shooting. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular speed ammunition. Us e : For hunting small game or target shooting. Remington Blank and Shot Cartridges Made in assorted rim fire and center fire calibers for rifles, revolvers and pistols. Blank cartridges used largely for athletic events. Shot cartridges used for small game, and in miniature trap and skeet shooting. "Kleanbore" priming. Remington Center Fire Rifle Cartridges Calibers for all sporting purposes. "Kleanbore" priming does not cause rust and corrosion. Special progressive burning powder gives high velocities. Powder and priming protected from excess oil by a special oilproof process. Famous for high accuracy. Us e : For medium and big game hunting and target shooting. "Hi-Speed" Cartridges--Center Fire Rifle: Available in a wide variety of center fire calibers. Us e : For medium and big game hunting. "Express" Rifle Cartridges--Center Fire: Available in a wide variety of center fire calibers. Us e: For medium and big game hunting. 97 DUP210010890 REMINGTON ARMS COMPANY, INC. I Remington Center Fire Riile Cartridges "Auto Angling" Model 41 Trap: Throws perfect single with "Core-Lokt" Bullets Cartridges in big game calibers. The "Core-Lokt" bullet provides maximum expansion, minimum disintegration and unexcelled knockdown power. Us e : For hunting all North American big game. Remington Pistol and Revolver Cartridges and double targets at 72 different angles. Completely adjustable. Simple operation. Us e : For trapshooting. REMINGTON POWDER ACTUATED TOOLS Stud Drivers and Accessories Accessory Fittings: Couplings, tension washers, eye nuts, conduit clips, discs, etc., for special fastening uses. i Cartridges in all standard calibers. Protected by a special oilproof process against effects of oil used for lubrication. Will retain initial energy whether in chamber or magazine. Powerful, accurate, penetrating. Noncorrosive "Kleanbore" priming. Us e: For police, hunting and target purposes. Model 455A Remington "Power-Mate": A triggeroperated powder actuated basic unit. May be equipped with any one of four barrel kits to make up a Stud Driver for driving alloy steel studs into concrete, steel, and similar hard construction materials and for fastening other materials (wood, sheet metal, insulation, fixtures, etc.) to "Targetmaster" Cartridges--Center Fire--Pistol and Revolver: Available in several center fire calibers. Dis tinguished by wad cutter bullet, except for 38 Special round nose. Us e : For pistol and revolver target shooting. concrete or steel base materials. Weight: 5)4 lb. K-l "Captive-Stud" Kit: Built-in arresting buffer pre vents free flight of studs in case of over-penetration in soft construction materials. Weight: 6 lb. "Hi-Way Master" Cartridges--Center Fire--Pistol and Revolver: Available in 38 Special and 45 Automatic calibers. Distinguished by metal cased, metal penetrating bullet. Us e : Law enforcement. REMINGTON TRAPS AND TARGETS K-2 H-in. Light Duty Barrel Kit: Anchors )4-in. diameter studs with 22 caliber standard Power Loads. Weight: 3)4 lb- K-3 %-in. Medium Duty Barrel Kit: Anchors ?4-in. diameter studs with 22 caliber special Power Loads. Weight: 3 lb. "Blue Rock" Targets: "Easy Breakers." Clean to han dle; easy to see. They smoke on impact of shot charge. The target with chrome yellow dome and flywheel action. Us e : In all target traps which throw standard targets. Remington Hand Target Thrower: Light and easy to operate. Duplicates every type of wing shot by throwing targets any way desired. "The spring does the work." "Expert" Trap: For camps, cottages, boat and motor trips and "quail or walk-up" installations having a multiple trap layout. Light in weight, strong construction and port able. Low in price. "Blue Rock" Trap: Ideal for skeet or trapshooting for small clubs and private estates. Throws single and double targets for trapshooting. Shovel-type carrier. Easy to in stall and operate. Moderately priced. "Blue Rock" Skeet Outfit: Includes two "Blue Rock" traps, single lever control and same accessories as furnished with "Wonder" Single Lever Skeet Outfit. Moderately priced. K-4 %-in. Medium and Heavy Duty Barrel Kit: Anchors %-in. diameter studs with 32 caliber Power Loads. Weight: 4 lb. "Mighty-Mite" Stud Driver--Remington Mode! 456: A highly simplified, single shot, hammer-operated, powderactuated fastening tool. Made with %-in. barrel in 22 caliber rim fire for driving %-in. studs only into construc tion materials as described above. Weight 3% lb. Special Guards for Model 455A Stud Driver: Inter changeable with standard guard. Guards conform to shape of prefabricated building materials and fittings, permit driving studs in hard-to-reach places. Stud Driver Power Loads--Special 22 and 32 Caliber Rim Fire: Eight graded powder charges in 22 caliber and five in 32 caliber to control penetration of )4-in. diameter and %-in. diameter fastening studs respectively in con struction materials. For medium duty applications, ^-instuds may be used in combination with 22 caliber Power Loads. Color of wad crimped into brass case identifies powder charge. Remington Autoloading Model 100T and 200S Trap; Holds 203 targets. Connects to standard 110 volt power supply. Easy to adjust for windage, elevation and tilt. Models for trap and skeet shooting. No trap boy needed. "Wonder" Skeet Outfit--De Luxe Electric: For DC or AC operation--DC outfit consists of two "Wonder" traps with electrical releases and accessories. For AC operation a Remington AC adapter is supplied in addition to DC equipment. "Wonder" Skeet Outfit--Single Lever: Includes two "Wonder" traps, single lever skeet pull, and galvanized wire. No additional accessories necessary. Can be adapted to electric release. Studs for Construction Fastening: Special hard alloy steel. Four general types--standard head, break-off head, internal thread, external thread--53 varieties for specialized fastening uses. Stud is held in barrel by oversize paper "Power Guide" retainer disc cemented to head of stud. Maximum stud diameter is %-in.; thread sizes %-in.~16 N.C., )4-in.-20 N.C. and 10-24 N. C. Remington Industrial Gun and Shells Model 400 Remington Industrial Gun: For removing clinker rings and balls which form in rotary kilns used in the manufacture of cement, refractories, lime, lightweight aggregates, lime sludge, etc. Also for removing protruding rocks, ice and other obstructions in quarries and mines. Weight of gun and mount 176 lb. DUP210010891 REMINGTON ARMS COMPANY, INC. Remington Industrial Shells: Used in above gun. Approximately S gauge. Muzzle energy, 7,475 ft-lb. Muzzle velocity, 1,600 ft. per sec. Also made in Magnum. Muzzle energy, 9,000 ft-lb. Muzzle velocity, 1,700 ft. per sec. Remington Humane Stunners, Power Loads and Cartridges Humane Stunner Power Loads: Special 22 caliber crimped shot case blank power loads. Available in five graded load strengths: strengths indicated by color dip on nose of load case. Model 411B Remington Humane Stunner: A single shot, bolt action tool for stunning animals (cattle, hogs, sheep) in meat packing houses. Contact-trigger operated. Short-travel piston with affixed concussion knob delivers blow of sufficient force to render animal unconscious prior to slaughter. Knobbed bolt handle, extended wooden operating handle; two-hand operation. Model 411C Remington Humane Stunner: Similar in design to Model 41 IB but employing a sleeve type bolt, and an automatically retracting penetrator rod instead of a concussion knob. Extended wooden handle; two-hand operation. Model 412 Remington Humane Stunner: Similar to Model 411C in that it employs sleeve bolt and auto matically retracting penetrator rod. Lever control; can be held and fired with one hand. Does not include extended wooden operating handle. Model 412A Remington Humane Stunner: Similar to Model 412 in that it employs sleeve bolt and lever con trol, and does not have extended wooden operating handle. Features a 2)4 in. diameter concussion knob instead of penetrator rod. Model 413 Remington Humane Stunner: Similar to Model 411B in that it employs knobbed bolt handle, etc. Features short handle, 2)4 in. diameter concussion knob. Remington Stun Safe Humane Stunning Cartridges --22 Caliber Rim Fire: For industrial use only. Special composition projectile contains no lead, is non-toxic. Features `Concussion Cone' bullet design, 2,000 feet-persecond velocity, automatic fragmentation on contact with hard surface, "Kleanbore" primers. For use in any 22 caliber rimfire rifle designed for firing of maximum-power 22 caliber `Long Rifle' cartridges. CHAIN SAWS AND ACCESSORIES Super 75 Model: Direct-drive transmission, 7500 rpm engine speed at full load, Remington Power Pulse engine, 7/16 in. pitch--.058 in. tang chain, Remington Roller Bearing guide bars in 18-, 24- and 30-in. lengths. Hori zontally mounted engine. Pro 88 Model: Direct-drive transmission, 6000 rpm engine speed at full load, 7/16 in.--.058 in. tang chain, Remington Roller Bearing guide bars in 18-, 24- and 30-in. lengths. Vertically mounted engine. Bantam Model: Direct-drive transmission, 5500 rpm engine speed at full load, 7/16 in. pitch--.058 in. tang chain. Remington Roller Bearing guide bars in 18-, 24and 30-in. lengths. Horizontally mounted engine. Bantam P Model: Similar to Bantam Model but equipped with 16-in. capacity pinchless-bow guide bar. SL-5 Model: Direct-drive transmission, 5500 rpm engine speed at full load, 7/16 in. pitch--.058 in. tang chain, Remington Roller Bearing guide bars in 18-, 24- and 30-in. lengths. Vertically mounted engine. SL-5P Model: Similar to SL-5 Model, but with 16-in. capacity pinchless-bow guide bar. GL-7 Model: Similar to SL-5 Model, but with more powerful engine. SL-5R and GL-7R Models: Similar to SL-5 and GL-7 Models but with planetary-gear transmissions (3.56-to-l ratio), 9/16 in. pitch--.058 in. tang chains (or optional 9/16 in. pitch--.077 in. tang chains), bar lengths to 36 in. SL-5RP and GL-7RP Models: Similar to SL-5R and GL-7R Models but with 16-in. capacity pinchless-bow guide bars, no chain option. SL-5G Model: Similar to SL-5 Model but with 2-to-l ratio gear transmission, J4 in. pitch--.058 in. tang chain, bar lengths to 36 in. SL-5GS Model: Similar to SL-5G Model but with 3.2-to-l gear ratio. SL-5GP and SL-5GPS Models: Similar to SL-5G and SL-5GS Models, but with 16-in. capacity pinchless-bow guide bars. 2- MG Model: Detachable geared-transmission (2.86-to-l ratio) 360 indexing bar, 9/16 in. pitch--.077 in. tang chain, Remington Roller Bearing guide bars in 18-, 24-, 30-, 36-, 42- and 54-in. lengths. 3- E Model: AC-DC, 25 to 60 cycle, 115 volts (230 volts available), rated 25 amps at 115 v. Spiral bevel gears, 800 feet-per-minute chain speed; generator wattage re quired: 5,000 watts. 9/16 in. pitch--.058 in. tang chain, 24- or 36-in. Remington Roller Bearing guide bars. EL Model: AC-DC, 25 to 60 cycle, 115 volts, rated 12 amps at 115 v. Spiral bevel gears, 800 feet-per-minute chain speed; generator wattage required: 2,000 watts. 7/16 in. pitch--.058 in. tang chain, Remington Roller Bearing guide bar 18 in. long. 1-P Model: One-man air-powered saw with 600 feet-perminute chain speed, 4-vane rotary motor, automatic oiler, equipped with %-in. pitch--.058 in. tang chain, 12-in. Remington Roller Bearing guide bar. 6-P Model: Two-man air-powered saw with 1900 feetper-minute chain speed, 4-vane rotary motor, automatic oiler, equipped with 9/16 in. pitch--.077 in. tang chain, Remington Roller Bearing guide bars in lengths of 18-, 24-, 30-, 36- and 42-in. Chain Saw Accessories Remington Flat Top Saw Chain: 7/16in. pitch--,058in. tang. Features specially designed cutting teeth for fast cutting, easier sharpening, maximum strength. In lengths to fit guide bars and in 50- and 100-ft. reels. Remington 48411 Chain Saw Oil: Made for 2-cycle engines--specifically formulated for mixing with gasoline. Co n t a in e r s : Pt., in 24-pt. boxes. 99 DUP210010892 REMINGTON ARMS COMPANY, INC. ! i 1 REMINGTON CONSTRUCTION AND 2 EGP Model: Same as 1 EG except speed--counter shaft i INDUSTRIAL TOOLS supplies speeds of 1650, 2700, 4500 or 7400 rpm. Vibrators, Concrete--Gasoline-Electric-Air G^G Model: Same as 1 EG except HP which is 134 HP. 10 GV Model: 6^4 HP gasoline engine, 7S00 to 10,000 vpm, flexible shaft drive, 14- to 28-ft. lengths. Choice of 5 FG Model: Same as 1 EG except HP and phase--1J4 HP, 3 phase, 220 or 440 volts. heads, 1^-, 2%-, 334 or 434`in. diameters. 7 FG Model: Same as 1 EG except HP and phase--3 HP, 7 GV Model: 6% HP gasoline engine, 7000 vpm, flexible 3 phase, 220 or 440 volts. i shaft drive, 14- to 25-ft. lengths. Choice of heads, 1/4- or 234-in. diameter. Gasoline Trowels 36 GV Model: 3 HP gasoline engine, 3600 vpm, flexible shaft drive, 12- to 24-ft. lengths. Choice of heads, lj'g- or T 428 Model: 28 in. capacity, 100 lbs., four blade trowel supplied with combination float finish blades 6 in. x 1034 in. 23/8-in. diameter. T 434 Model: 34 in. capacity, 130 lbs., four blade trowel 1 EV Model: 1 HP Electric Universal motor, 115 volt available with float or finish blades. i AC-DC 10,000 vpm, flexible shaft drive, 2- to 14-ft. lengths. T 444 Model: 44 in. capacity, 216 lbs., four blade trowel Choice of heads, 1/4- or 1J4-in. diameter. supplied with finish or float blades. 2 EV Model: 1/4 HP Electric Universal motor, 115 or 230 volt, AC-DC 10,000 vpm, flexible shaft drive, 2- to 14 ft. lengths. Choice of heads, 1/4- or 1%-in. diameter. Air Tools Grinders--Air 3 EV Model: 2 HP Electric Universal motor, 115 or 230 PGK 1030L Model: Lever type, 30,000 rpm, 34 in. collet, volt, 10,000 vpm, flexible shaft drive, 7- to 21-ft. lengths. Midget die grinder, weight: 12 oz. Choice of heads, 1%-, 234- or 3j^-in. diameter. EV 26 Model: Electric motor-in-head 115 volt AC-DC, PGK 1030B Model: Button type, 30,000 rpm, 34 in. collet, Midget die grinder, weight: 12 oz. 7- to 14-ft. lengths, head 234-in. diameter. PGK 2022L Model: 22,000 rpm, lever type, J4 in. collet, 2 PV Model: 1% HP air motor, 10,000 vpm at 90 psi, Midget die grinder, weight: 134 lbs. flexible shaft drive, 2- to 14-ft. lengths. Choice of heads, 134- or 1%-in. diameter. PGK 2122L Model: Lever type, 22,000 rpm, 34 in. collet, Midget die grinder with extended spindle, weight: 134 lbs. 6 PV Model: 334 HP air motor, 10,000 vpm at 90 psi, flex ible shaft drive, 7- to 21-ft. lengths. Choice of heads, 1%-, 2j4j- or 3J4-in- diameter. PGE 103CL Model: Lever type, 30,000 rpm, small wheel grinder for 34 in- vitrified or 1 in. organic wheels, weight: 12 oz. PV 24 Model: Air motor-in-head, 10,000 vpm at 90 psi, 1 7- to 14-ft. lengths, head 2}4-in. diameter. PGE 1030B Model: Same as PGE 1030L except with but ton throttle. j: Impact Wrenches--Electric and Air PGE 2022L Model: 22,000 rpm small wheel grinder, lever W 1000 Model: Electric, 13 amps, 115 volts, 34 in. square drive 1 in. capacity, reversible, weight: 18 lbs. throttle for 1 in. vitrified or 134 in. organic wheels, weight: 134 lbs. W 120 Model: Electric, 4 amps, 115 volts, J4 in. square 1 drive, in. capacity, reversible, weight: 734 lbs. PGE 2122L Model: Same as 2022L except with extended spindle, weight: 1% lbs. PW 206P Model: Air, 34 in. square drive, 34 in. capacity, reversible, weight: 3% lbs. PG 3018L Model: Small wheel grinder for 134 in. vitrified or 2 in. organic wheels, weight: 2/4 lbs. less wheel guard. PW 308P Model: Air, 34 in. square drive, J4 in. capacity, reversible, weight: 6 lbs. PG 2022L Model: 22,000 rpm grinder for 1 in. vitrified or 134 in- organic wheels, weight: 1% lbs. less wheel guard. PW4012P Model: Air, % in. square drive, 34 in. capacity, reversible, weight: 11 lbs. PG 506G Model: 6000 rpm grinder for 4 in. vitrified or 6 in. organic wheels, weight: 8% lbs. less wheel guard. PW 5014S Model: Air, 34 in. square drive, 1 in. capacity, reversible, weight: 1934 lbs. Sanders, Polishers--Air Circular Saws--Electric and Air 86 834 in. Electric Circular Saw, 2% in. cutting capacity, 12 amps, 115 volts, 35 lbs. shipping weight. P 86 Model: Air, 834 in. Circular Saw, maximum cutting capacity 2J4 in, weight: 14 lbs. P 128 Model: Air Circular Saw, 12 in. blade size, 4 5/16 in. maximum cutting capacity, weight: 33 lbs. Flexible Shaft Grinders 1 EG Model: 34 HP, single phase, 115 or 230 volts, 6 ft. shaft, 3450 rpm, available with hanger pedestal or round base mounting, straight and angle spindles, available accessories. PSA 307L Model: 7 in. disc sander, 5900 rpm, 34-11 spin dle thread, weight: 5 % lbs. PPA 309L Model: Polisher for use with 9 in. polishing bonnet, 950 rpm, 54-11 spindle thread, weight: 454 lbs. Drills--Air PD 103L Model:. 2600 rpm, 34 in- chuck capacity, 3/16 in. drill capacity, weight: 14 oz. PD 204P Model: Pistol grip, 2200 rpm, J4 in. drill capacity, weight: 2 lbs. PD 204L Model: Same as PD 204P except lever throttle, weight: 1?4 lbs. DUP210010893 REMINGTON ARMS COMPANY, INC. PETERS CARTRIDGE DIVISION PD 304P Model: Pistol trigger, 2500 rpm, K in. heavy duty, weight: 3 lbs. PD 304L Model: Same as PD 304P except lever throttle. PD 326P Model: Pistol grip, 1400 rpm, % in. heavy duty, weight: 4% lbs. PD 32SP Model: Pistol grip, 575 rpm, J4 in. weight: 4^g lbs. PD508G Model: Grip handle trigger, 950 rpm, heavy duty, V% in. capacity, weight: 934 lbs. PDA 224L Model: Angle drill, 1600 rpm, }4 in. capacity, weight: 1% lbs. PDA 318L Model: Angle drill, 950 rpm, 34 in. capacity, weight: 534 lbs. Screwdrivers--Air PSD 103L Model: Adjustable ball clutch, 2600 rpm, max imum capacity No. 8 free running screws, No. 5 heavy tapping screws with bit and finder, weight: 1}4 lbs., nonreversible. PSD 204P Model: Adjustable ball type clutch, 2000 rpm capacity, J4 in. free running screws, No. 10 heavy tapping screws furnished with bit and finder, weight: 2 lbs., Pistol grip, non-reversible. PSD 204L Model: Same as PSD 204P except with lever throttle. PSD 30GP Model: Adjustable ratchet type clutch, 2500 rpm, maximum capacity, ?4 in. free running screw, weight: 4 lbs., pistol grip, non-reversible. PSDR 204P Model: Adjustable ball type clutch, 1500 rpm maximum capacity, 34 in. free running screws, No. 10 heavy tapping screw, weight: 2 7/16 lbs., reversible, fur nished with bit and finder. PSDR 30GP Model: Adjustable ratchet type clutch, 2500 rpm capacity, % in. free running screw, weight: 4J4 lbs., reversible, furnished with bit and finder. Right Angle Nut Setters--Air PNA 316L Model: 950 rpm, 34 in. square drive spindle, % in. bolt capacity, weight: 4 lbs. PETERS CARTRIDGE DIVISION GENERAL OFFICE: Bridgeport 2, Connecticut BRANCH OFFICES: Berkeley 2, California Boston Office Chicago 3, Illinois Cleveland 14, Ohio Dallas 1, Texas Greensboro, North Carolina Jacksonville 7, Florida Memphis 3, Tennessee Minneapolis 3, Minnesota New York Office Pittsburgh 22, Pennsylvania St. Louis 1, Missouri Salt Lake City 11, Utah 2735 San Pablo Avenue 939 Barnum Avenue; Bridgeport 2, Conn. 7 South Dearborn Street 1308 Union Commerce Building 1241 National Building 517 Jefferson Building 1603 Prudential Building, 841 Miami Road 1701 Sterick Building 614 Plymouth Building 939 Barnum Avenue; Bridgeport 2, Conn. 2001 First National Bank Building 1810 Arcade Building 909 Walker Bank Building PLANT: Bridgeport, Connecticut PRODUCTS TELEPHONE EDison 3-1112 THornwall 8-5514 EDison 6-3366 STate 2-7781 PRospect 1-7804 Riverside 2-6908 BRoadway 2-6879 FLanders 9-4252 JAckson 6-5326 FEderal 3-5800 EDison 6-5091 GRant 1-3076 MAin 1-8622 ELgin 5-8686 PETERS AMMUNITION Shotgun Shells with "Kleanbore" Priming Peters "High Velocity" Shells--Shotgun: Blue color; Peters Flat-Top Crimp; 10, 12, 16, 20, 28 and 410 gauges (10 and 410 gauges in roll crimp only). Loaded with pro gressive-burning powder. Thoroughly waterproof. Extra speed, uniform pattern, long range power. Also in standard length (2%-in.) Magnum and extra length 3-in. shells. Us e : For maximum long range game shooting. "High Velocity" Buckshot Loads: 12,16 and 20 gauges. Us e : For large game and police duty. "High Velocity" Slugs--Rifled: 12, 16, 20, 28 and 410 gauges. Us e : Shells loaded with rifled slugs are used principally on deer and bear in states where rifles are prohibited. "Victor" Shotgun Shells: Dark red color; 12, 16 and 20 gauges with the Peters Crimp. A quality shotgun shell at a popular price. Us e : For field shooting. "Victor" Spreader Loads: 12, 16 and 20 gauges. Shot is separated into cells by wads between layers of shot to secure open patterns. Us e : For thicket or close range shooting. 101 DUP210010894 REMINGTON ARMS COMPANY, INC. ft PETERS CARTRIDGE DIVISION Target Loads: Blue color; 12, 16 and 20 gauges. Us e : For skeet and trapshooting. Peters "Oil-Tite" Cartridges--Center Fire Rifle with "Kleanbore" Priming Peters Rim Fire 22 Caliber Cartridges with "Kleanbore" Priming Peters Match 22 Caliber Rim Fire Cartridges: Long ...:*.!. ----- iuai LJtugua wiua p^yvuvt i__r biuiiudju velocities and designed especially for superfine accuracy. Us e : Particularly recommended for rifle target shooting. "High Velocity" Cartridges--22 Caliber Rim Fire: Developed for long range and great penetrating power. Us e: For small game and pest shooting. Cartridges loaded with bullets best adapted for their re spective uses and manufactured in all standard calibers. Highest velocity and positive ignition. Powder and primer protected against deterioration through oil seepage and moisture by special process. Us e : For medium and big game hunting and target shooting. "High Velocity" Cartridges--Center Fire Rifle: Avail able in a wide variety of center fire calibers'. Us e : For medium and big game hunting. Peters Center Fire Rifle Cartridges with "Core-Lokt" Bullets "High Velocity" Cartridges--22 Caliber Rim Fire-- Shot: Long rifle shot cartridges loaded with No. 12 shot. Us e: For small game, miniature skeet, and trapshooting. Made in selected big game rifle calibers. Provide maximum uniform expansion with minimum disintegration and tre mendous knockdown power. Us e : For all North American big game. "Thunderbolt" Cartridges--22 Caliber Rim Fire-- Short: Special composition bullet; high muzzle velocity. Us e: For informal shooting and medium-range small game hunting. "Krumble Ball" Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxic; pulverizes on impact. Us e: For gallery shooting. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular velocity ammunition. Us e : For hunting small game or target shooting. "Target" Cartridges--22 Caliber Rim Fire: Standard velocity cartridges designed for fine accuracy. Us e : For rifle and pistol target shooting. Peters "Oil-Tite" Cartridges--Pistol and Revolver with "Kleanbore" Priming Cartridges in all standard calibers. "Oil-Tite" for pro tection against oil in chamber or magazine. Famous for target shooting. Powerful, accurate, penetrating. Non corrosive "Kleanbore" priming. Us e : For police, hunting and target shooting. "Highway Patrol" Cartridges--Center Fire--Pistol and Revolver: Available in 38 Special and 45 Automatic calibers. Distinguished by metal cased, metal penetrating bullet. Us e : Law enforcement. Peters Blank Cartridges Made in rim fire and center fire calibers for rifles, revolvers and pistols. Blank cartridges used largely for athletic events, theater productions and sound effects. DUP210010895 SURPLUS fVSATERIALS DiViSiON GENERAL OFFICE: Nemours Building Wilmington 98, Delaware PRODUCTS TELEPHONE PRospect 4-3700 Buildings: All kinds for dismantlement Chemicals: Surplus Chemicals, Solvents, Acids, Pigments, Special Organic Compounds, Laboratory Reagents Construction Tools and Materials: All kinds--new and used Containers: Bags, Barrels, Bottles, Cartons, Drums (Steel and Fiber), Kegs, Pails, Compressed Gas Cylinders. Electrical Supplies: Conduit, Condulets, Fuses, Motors, Rheostats, Starters, Switches, Wire--new and used Furniture: Office and Hotel Furniture and Equipment, Typewriters and Business Machines--used Machinery and Equipment: All kinds--new and used Automotive (Cars and Trucks), Factory Trucks and Railroad Equipment Boilers, Engines, Turbines and Steam Power Equip ment Centrifuges, Filters and Dust Collectors Compressors (Air and Refrigeration) and Pumps Construction Equipment (Cranes, Tractors and Mis cellaneous Heavy Equipment) Drives Drying Equipment Electrical Equipment (miscellaneous) and Trans formers Fans, Blowers, Exhausters and Ventilators Heaters, Condensers, Exchangers and Coolers Hoists, Lifts and Conveyors Instruments and Metering Equipment Machine Tools and Shop Equipment Mills, Grinders, Crushers, Mixers and Cutters Motors, Gear Motors, Motor Reducers and M.G. Sets Office, Laboratory and Change House Equipment Safety and Fire Protection Equipment Scales Spare Parts Tanks, Kettles, Pressure Vessels, Stills and Columns Textile Equipment Vibrators, Shakers and Feeders Metal Scrap--Ferrous and Nonferrous: Aluminum, Brass, Bronze, Copper, Iron, Lead, Monel, Nickel, Stainless Steel, Steel, Tin, Zinc Mill Supplies: General Industrial Maintenance Materials--new and used Paper Stock, Cloth and Rags: Fabrics, Rags, Paper, Rope Scrap and Used Filter Cloth Pipe, Valves and Fittings: All kinds--new and used Residues and Sludges: By-Products of All Descriptions; Recovered Acids, Solvents, Salts, Lime, Cinders, Graphite, Metallic Residues Specialties: Spools, Bobbins, Pirns and Cones; Experimental lots and seconds of some Company products; Rubber; Plastics Stainless Steel: Shapes, Pipe, Sheets, Valves--new and used Steel Products: Structural, Bars, Plates, Shafting, Sheets, Rails, Cable --new and used 103 DUP210010896 w Mf 1; i BL. t e x t il e f ib e r s d e p a r t me n t TELEPHONE GENERAL OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Akron Region Akron 8, Ohio Charlotte Region Charlotte 1, North Carolina New York Region New York 1, New York Philadelphia Region Chicago, Illinois Wynnewood, Pennsylvania Providence Region Rumford 16, Rhode Island 191 South Main Street ("Dacron", Nylon, Rayon) 427 West fourth Street (Acetate, "Dacron", Nylon, "Orion", Rayon) Empire State Building, 350 Fifth Avenue (Acetate, "Dacron", Nylon, "Orion", Rayon) 7 South Dearborn Street 308 East Lancaster Avenue (Acetate, "Dacron", Nylon, "Orion", Rayon, "Teflon") 50 North Broadway (Acetate, "Dacron", Nylon, "Orion", Rayon) HEmlock 4-6651 ERanklin 5-5561 LOngacre 3-6400 ANdover 3-7000 TRinity 8-2 700' GEneva 4-6500 PLANTS: Camden, South Carolina ("Orion") Chattanooga, Tennessee (Nylon) Kinston, North Carolina ("Dacron") Martinsville, Virginia (Nylon) Old Hickory, Tennessee ("Dacron" and Rayon) Richmond, Virginia (Rayon, Nylon and "Teflon") Seaford, Delaware (Nylon) Waynesboro, Virginia (Acetate, "Lycra" and "Orion") PRODUCTS "Acele" Acetate Fiber: Textile fibers in the form of continuous filament yarns available in natural and colorsealed, normal tenacity continuous filament yarns in various deniers and lusters. Us e: All branches of the textile industry. Packaged on tubes and cones in cases, and beams. "Ondelette" Random-SIub Rayon Fiber: Textile fibers in the form of continuous filament yarns. Us e : Decorative yarn for apparel and home furnishing appli cations. Available in a variety of deniers in bright luster normal tenacity on cones. "Antron" Trilobal Muitifilament Nylon: Textile fibers in the form of continuous filament yarns. Us e : All branches of the apparel industry. Available in normal tenacity continuous filament multifilament yarns in various deniers and lusters. Packaged on bobbins and tubes in cases. "Dacron" Polyester Fiber: Textile fibers in the form of normal and high tenacity continuous filament yarns, staple and tow. Us e : All branches of the textile industry. Availa ble in high tenacity and normal tenacity continuous fila ment textile yarns in various deniers and lusters; high tenacity bright continuous filament industrial yarns, staple and tow, in various deniers, and fiberfill. Continuous fila ment packaged on tubes in cases. Staple and tow packaged in bales and cartons. Fiberfill packaged in bales. "Lycra" Spandex Fiber: Textile fibers in the form of continuous monofilament yarns. Us e : Elastic fabrics in the fields of foundation garments, swimwear, and surgical hosiery. Packaged on tubes. Nylon Fiber: [66 nylon] Textile fibers in the form of con tinuous filament yarns, staple and tow. Us e : All branches of the textile industry. Available in high tenacity and normal tenacity continuous multifilament yarns and mono filaments, and staple and tow in various deniers and lusters. Continuous filament packaged on bobbins and tubes in cases, and beams. Staple and tow packaged in bales and cartons. "Orion" Acrylic Fiber: Textile fibers in the form of tow and staple. Us e: All branches of the textile industry. Available in natural and color-sealed black normal tenacity staple and tow in various deniers and lusters. Staple and tow packaged in bales and cartons. "Orion Cantrece" Acrylic Fiber: Textile fibers in the form of continuous filament yarn. Us e : For knitwear. Available in 200 denier 80 filament semi-dull luster on nonreturnable tubes. "Orion Sayelie" Bi-Component Acrylic Fiber: Textile fibers in the form of staple and tow. Us e : All branches of the textile industry. Available in natural color normal tenacity staple and tow in various deniers and in semi-dull luster. Packaged in bales and cartons. Rayon Fiber: Textile fibers in the form of continuous fila ment yarns. Us e : All branches of the textile industry. Available in "Cordura" rayon yarn, "Super Cordura" high tenacity rayon yarn, and normal tenacity continuous filament yarns in various deniers, specialty yarns and lusters. Packaged on cones, tubes, cakes, and beams. "Teflon" TFE-Fluorocarbon Fiber: Textile fibers in the form of continuous filament yarns, staple and tow. Us e : Fabrics, fibrous sheeting, braided structures, and felts, primarily for industrial uses. Available in 400.and 1200 denier continuous filament, packaged on tubes and cones. Staple and tow available in 6.67 denier per filament packaged in bales and cartons. 104 DUP210010897 DUP210010898 TRADEMARKS DriU PONT'S trademarks are valuable assets, and should be treated and protected as such. The function of these trademarks is to identify the Du Pont Company as the source of the products to which they are applied, and to distinguish such products from those of other manufacturers. To accomplish this a trademark must remain an indication of source and not become the descriptive or generic term for a product, or class of products. When trademark significance is lost, exclusive right to the term is lost, too, and others may use it for similar products. Numerous once valuable trademarks, through misuse, have become descriptive words of the language. The name DU PONT and the well-known Du Pont oval are trademarks applied to all of the Company's products. There are numerous other trademarks which are applied to a single product, or to a line of products. Trademarks play an important role in the marketing of products. They must be protected at all times. The fol lowing procedures should be observed by Du Pont per sonnel and by others who have occasion to use or refer to Du Pont trademarks. Special procedures may be advisable for trademarks used on products covered by patents or those widely advertised to the public. The Legal Department should be consulted about these. 1. Make the Trademark Distinctive Always capitalize the first letter of the trademark and make it otherwise distinctive by use of quotation marks, capitalization, italics, or special printing. Such treatment will indicate that our trademarks are not common every day words of the language. 2. Indicate Registration Most Du Pont trademarks are registered in the United States Patent Office. When a registered trademark appears on the goods, containers, displays, tags, labels or in advertisements, the legend "Reg. U.S. Pat. Off." should also appear cither beneath the mark or in a footnote keyed to the mark. In advertising and promotional ma terial a more informative legend is sometimes useful, e.g. "Dacron" is Du Pont's registered trademark for its polyester fiber. Where space considerations make abbre viation desirable, the letter R in a circle, viz.: , may be used. If the trademark has not been registered, then it is important that there be no reference to registration. Instead, the legend should be simply "Trademark". 3. Make Du Pont Ownership Clear When other companies use one of our trademarks, it may be clear that the word is a trademark, but it may not be clear who owns it. In such cases, the mark should be identified as the property of the Du Pont Company. Where the trademark applies only to a Du Pont raw material or ingredient, it should not be used to create the impression that it is the trademark for the finished goods. 4. Use the Generic Term with the Trademark To minimize the possibility of a trademark becoming the descriptive or generic term for the product, it is necessary that the public and the trade know what the generic or descriptive term is. Accordingly, the generic or descriptive term should be used at least once in all advertisements, promotional material, displays, labels, and published reports. It should also be used in corre spondence, unless one is certain that the recipients-- such as limited classes of industrial users--recognize the term so well as a trademark that the generic or descrip tive term is implied. Although there is no legal requirement that the generic or descriptive term immediately follow the trademark, it is suggested that in advertising and other promotional material, it immediately follow the trademark, and pref erably in the first paragraph of the body copy. 5. Encourage Proper Use by Others It is important that our trademarks be used properly, not only by Du Pont personnel, but also by others who use the marks, such as customers, finished goods manu facturers, and the public. Proper use of Du Pont trade marks by others should be encouraged. Improper uses should be discouraged and, if not discontinued, reported to the Legal Department. It is highly improper--for example--to use a Du Pont trademark or a similar word as a trademark for goods not manufactured by Du Pont, or to use a Du Pont trademark or a prominent part of it to coin a new trademark, or to use a Du Pont trade mark without so designating it. 107 DUP210010899 TRADEMARKS Key to Abbreviations D & C....................... Dyes and Chemicals Division, Organic Chemicals Department ELAS........................................................................... Elastomer Chemicals Department ELCM................................................................................... Electrochemicals Department EXPL.................................................................................................Explosives Department FAB.......................................... Fabrics Division, Fabrics and Finishes Department FIBR......................................................................................... Textile Fibers Department FILM . . . . .... ................................................................................... Film Department FIN.......................................... Finishes Division, Fabrics and Finishes Department FRE............................"Freon" Products Division, Organic Chemicals Department I&B............................................................. Industrial and Biochemicals Department PET........................Petroleum Chemicals Division, Organic Chemicals Department PHOT.....................................................................................Photo Products Department PIGM...............................................................................................Pigments Department POLY..........................................................................................Polychemicals Department REM........................................................................... Remington Arms Company, Inc. DUP210010900 TRADEMARKS The following list includes the majority of product trademarks owned by E. I. duPont de Nemours & Company (Inc.) or its domestic subsidiaries. In each instance the trade mark is followed by the generic name of the product to which the mark is applied. Division or Department "7" Polish ..................................................................Fin "7" Rubbing Compound ...................................... Fin '"7 Seas" Marine Specialties Products ...............Fin *"40" Outside White ............................................... Fin *"552" Rubber Accelerator .................................... Elas "808" Rubber Accelerator .................................... Eias "833" Rubber Accelerator .................................... Elas "Acele" Acetate Fiber............................................ Fibr *"Acetamine" Developer ........................................ D & C "Acetamine" Dyes ................................................. D & C "Acudet" Delay Caps .............................................Expl "Adiprene" Urethane Rubbers .............................Elas *"Adlux" Photographic Film ................................. Phot "Akrofiex" Rubber Antioxidants ........................ Elas "Alathon" Polyethylene Resins.............................Poly "Albone" Hydrogen Peroxide...............................Elcm "Alkanol" Surface Active Agents ......................D & C "Alkanol" Textile Processing Agents ............... D & C "Ammate" Weed and Brush Killers ....................1 & B "Antox" Rubber Antioxidant ............................... Elas "Antoxide" Metal Primer ......................................Fin "Antron" Nylon ...................................................... Fibr "Aquarex" Mold Release Agents ........................ Elas "Aquarex" Surface Active Agents ......................Elas "Arasan" Seed Disinfectants and Protectants ..I&B "Aridex" Water Repellents ....................................D & C "Arlton" Combs ...................................................... Poly "Arlton" Toothbrushes .......................................... Poly "Armalon" TFE-Fluorocarbon Fiber Felt ......Fab "Arntalon" TFE-Fluorocarbon Resin Coated Glass Fabrics, Tapes and Laminates .............Fab "Artie" Methyl Chloride ........................................ Elcm * "Auric" Ferric Oxide .............................................Pigm *"Auto Angling" Trap ..............................................Rem *"Automaster" Shot Gun ........................................ Rem "Avitex" Antistatic Developer .............................D & C "Avitex" Softeners ................................................. D &C "Avitex" Surface Active Agent .......................... D & C "Avitone" Softeners ............................................... D &.C B "Barak" Rubber Accelerator .Elas *"Black Jack" Enamel .Fin "Blue Rock" Skeet Outfit . Rem "Blue Rock" Targets ........ .Rem "Blue Rock" Trap ............ .Rem "Budium" Can Coating .Fin "Butacite" Polyvinyl Butyral Resin ................... Poly "Cadalyte" Bright Dip .......................................... Elcm "Cadalyte" Brightener .......................................... Elcm "Cadalyte" Maintenance Compound ................. Elcm "Cadalyte" Plating Salts ........................................ Elcm "Capracyl" Dyes ...................................................... D & C Division or Department ^"Captain's Combo" Synthetic Sponge ............... Fin *"Captive-Stud" Kit ..................................................Rem "Celanthrene" Dyes ..................................................D & C "Cel-O-Seal" Cellulose Bands ............................... Film. "Ceresan" Seed Disinfectants ............................... / & B "Chrornacyi" Dyes ............................... ..................D <1 C "Civona" Rayon Yarn ...........................................Fibr *"CM" Flame Retardant ......................................... I&B "Combo" Synthetic Sponge................................... Fin "Coppralyte" Addition Agent ............................. Elcm "Coppralyte" Plating Salt .......................................Elcm "Cordura" Rayon Yarn ........................................ Fibr "Core-Lokt" Bullets ............................................... Rem *"Cronaflex" Engineering Reproduction Film ....Phot "Cronapaque" Polyester Print Film ................... Phot "Cronar" Polyester Photographic Film .............Phot "Cronar" Polyester Photographic Film Base ..Phot "Cyanobrik" Sodium Cyanide ............................. Elcm "Cyanogran" Sodium Cyanide .............................Elcm D *"Dacolyte" Addition Agent................................... Elcm "Dacron" Polyester Fiber ......................................Fibr "Dalamar" Azo Yellow ........................................ Pigm "Decalin" Solvent ....................................................D & C "Deenate" DDT Insecticide ................................. I & B *"Dekatyl" Dyes ........................................................ D & C "Delrin" Acetal Resins ...........................................Poly "Delsan" Seed Protectant ...................................... I&B *"Dentabest" Toothbrushes ....................................Poly "DH" Photographic Emulsion .............................Phot "Diagen" Dyes ...........................................................D & C "Dissolvo" Tar and Road Oil Remover .......... Fin "Duclean" Inhibited Sulfuric Acid ....................I & B "Duclean" Inhibited HydochloricAcid .............I & B "Duco" Cement ...................................................... Fin "Duco" Enamels ...................................................... Fin "Duco" Finishes ...................................................... Fin "Duco" Lacquers ....................................................Fin "Duco" Lacquer Sealers ........................................ Fin "Duco" Mixing andTinting Colors ....................Fin "Duco" Polishing orRubbing Compound ..........Fin "Duco" Primers ...................................................... Fin "Duco" Putties ........................................................ Fin "Duco" Sealer ...........................................................Fin "Duco" Solvents ...................................................... Fin "Duco" Thinners......................................................Fin "Duco" Undercoat ..................................................Fin "Du-Lite" Wood Bleach System ...........................Fin "Dulux" Clear ...........................................................Fin "Dulux" Enamels ....................................................Fin "Dulux" Finishes ....................................................Fin "Dulux" Foam Resin ............................................. Fin "Dulux" Paints ........................................................ Fin "Dulux" Primers ...................................................... Fin "Dulux" Putties .........................................................Fin "Dulux" Reducers ....................................................Fin ^Denotes unregistered trademark; all others are registered. DUP210010901 TRADEMARKS ' Division or Department "Dulux" ReinforcingOil .........................................Fin "Dulux" Stencil Paste ............................................. fin "Dulux" Thinners .....................................................fin "Dulux" Undercoat .................................................. p[n "Dulux" Varnishes .................................................. Fin "Duobel" Explosives ................................................ Expl "Duol" Pigment......................................................... Pigm "Duponol" Sodium Lauryl Sulfate ..................... D &. C "Duponol" Surface Active Agents .................. D & C "Durobrite" Addition Agent .................................. Elcm "Dybar" Weed and Brush Killer ........................./ & b "Dycril" Photopolymer Printing Plate ................Phot "Elcord" Delay Unit ............................................. Expl "Elvacet" Polyvinyl Acetate ..................................Elcm "Elvanol" Polyvinyl Alcohol ................................Elcm *"Elvax" Vinyl Resins ..............................................Elcm *"Endor" Rubber Peptizing Agent ......................Elas "Eureka" Soldering Fluxes ..................................../ & B "Expert" Trap ...........................................................Rem ^"Express" Buckshot Loads .................................... Rem ^"Express" Rifle Cartridges .................................... Rem *"Express" Shotgun Shells ...................................... Rem ^"Express" Slugs ......................................................... Rem "Extra" Dynamite ................................................ Expl ,, F ............... `F-11" Blowing Agent .......................................... Fre "F-ll" Propellent ......................................... Fre "F-ll" Refrigerant ................................................. Fre "F-ll" Solvent ........................................................Fre "F-12" Blowing Agent ..........................................Fre "F-12" Propellent ................................................... Fre "F-12" Refrigerant .................................................Fre "F-13" Refrigerant .................................................Fre "F-13B1" Refrigerant .............................................Fre "F-14" Propellant .................................................... Fre "F-14" Refrigerant .................................................. Fre "F-22" Plastics Intermediate .............................. Fre "F-22" Propellent ...................................................Fre "F-22" Refrigerant .................................................. Fre "F-22" Solvent .........................................................pre "F-ll3" Plastics Intermediate ............................. Fre "F-113" Propellent .................................................. Fre "F-113" Refrigerant ................................................Fre "F-113" Solvent .......................................................Fre "F-1I4" Propellent .................................................. Fre "F-1I4" Refrigerant ................................................Fre "Fabrikoid" Coated Fabrics ................................. Fab "Fabrilite" Coated Fabrics .................................... Fab "Fabrilite" Vinyl Materials .................................... Fab "Fairprene" Cements ................................................Fab "Fairprene" Coated Fabrics ..................................Fab "Fairprene" Sheet Stocks ...................................... Fab "Fairprene" Tape .................................................... Fab "Fermate" Fungicides .............................................I & B "Fieldmaster" Rifle ................................................. Rem "Flintflex" Enamels .................................................. Fin "Flow Kote" Paint .................................................. Fin "Fluoro-Film" X-ray Film ....................................Phot "Freon" Fluorinated Hydrocarbons .................... Fre 110 Division or Department "Freon-1 1" Blowing Agent .................................... Fre "Freon-1 1" Propellent ............................................. Fre "Freon-11" Refrigerant ............................................Fre "Freon-11" Solvent ........ Fre "Freon-12" Blowing Agent .................................... Fre "Freon-12" Propellent ..............................................Fre "Freon-12" Refrigerant ........................................... Fre "Freon-13" Refrigerant .........................................Fre "Freon-1 3B!" Refrigerant .....................................Fre "Freon-14" Propellant ........................................... Fre "Freon-14" Refrigerant ........................................... Fre "Freon-22" Plastics Intermediate .......................Fre "Freon-22" Propellent ..............................................Fre "Freon-22" Refrigerant ........................................... Fre "Freon-22" Solvent .................................................. Fre "Freon-113" Plastics Intermediate .......................Fre "Freon-113" Propellent ........................................... Fre "Freon-113" Refrigerant ......................................... Fre "Freon-113" Solvent ................................................Fre "Freon-114" Propellent ........................................... Fre "Freon-114" Refrigerant ......................................... Fre "Freon" BF Solvent ................................................ Fre "Freon" MF Solvent ................................................Fre "Freon" TF Solvent ................................................ Fre "Freon" C-318 Dielectric Gas ............................ Fre "Freon" C-318 Propellent ................................. Fre "Freon" FE-1301 Fire Extinguishing Agent ....Fre c *"G-942" Tanning Agent ........................................ 7 & B "Gamemaster" Rifle ................................................ Rem "G.B.S." Sodium Bisulfates ....................................I & B "Gelex" Dynamites .................................................. Expl *"Gelobel" Explosives ..............................................Expl 5'"Glow" Car Wash ....................................................Fin H "Halopont" Pigment Colors ................................. D & C "Heliozone" Inhibitor ............................................. Elas "Hexalin" Cyclohexanol ......................................... I&B "Hi-Cap" Dynamite ................................................ Expl "High Speed" Tinning Flux ..................................7 & B *"High Velocity" Buckshot Loads ........................ Rem *"High Velocity" Cartridges ..................................Rem *"High Velocity" Shells ...........................................Rem ""`High Velocity" Slugs ...........................................Rem ^"Highway Patrol" Cartridges ............................... Rem *"Hi-Speed" Cartridges ............................................. Rem "Hitec" Heat Transfer Salt ....................................Expl * "Hi-Velocity" Gelatin ..............................................Expl "Hi-Way Master" Cartridges ............................... Rem "Hydan" Feed Supplement .................................... I&B "Hydraphtal" Textile Processing Agent .............D & C "Hylene" Organic Isocyanates ............................. Elas "Hypalon" Synthetic Rubbers ............................... Elas "Hytrol" Cyclohexanone .......................................I&B I "Impedes" Sodium Propionate ............................. 1 & B J *"Jet Clene" Upholstery Cleaner ...........................Fin "Denotes unregistered trademark; all others are registered. DUP210010902 Division or Department K "K" Cellophane ......................................................... Film "Karmex" Herbicide ............................................... I & B "Kleanbore" Priming ................................................ Rem "Kleanrol" Soldering Flux ....................................I & B "Kloben" Weed Killer ............................................. I & B "Krumble Ball" Cartridges ....................................Rem L *"La Belle" Combs .....................................................Poly "Latyl" Carrier .........................................................D & C "Latyl" Dyes ............................................................. D & C "Lecton" Acrylic Resin Coated Fabrics and Laminates.............................................................. Fab "Lecton" Acrylic Resin Wire Enamels.............. Fin "Leucosol" Dyes ...................................................... D & C *"Lido" Combs ........................................................... Poly "Lignasan" Fungicides ...........................................I&B *"Litho" Photographic Paper................................ Phot "Lithosol" Acids and Bases ..................................D & C "Lithosol" Dyes .........................................................D & C "Lorol" Fatty Alcohols ...........................................I & B "Lucite" Acrylic House Paint............................... Fin "Lucite" Acrylic Lacquers ....................................Fin "Lucite" Acrylic Resins...........................Elcm & Poly "Lucite" Acrylic Resin Dental Materials .......... Poly "Lucite" Enamels .................................................... Fin "Lucite" Solvent........................................................ Fin "Lucite" Thinner ...................................................... Fin "Ludox" Colloidal Silicas ...................................... I & B "Lump Coal" Explosives .........................................Expl "Lusane" Dyes ...........................................................D & C "Luxol" Dyes ............................................................. D & C "Lycra" Spandex Fiber ...........................................Fibr M "Manzate" Fungicide ............................................. I & B "Marlate" Methoxychlor Insecticides .................. I&B "Matchmaster" Rifle ............................................... Rem "Melsan" Fungicide................................................. I & B "Merpentine" Surface Active Agent...................D & C "Merpol" Surface Active Agent ...........................D & C *"Methacrol" Lubricants..........................................D & C *"Methacrol" Resin Dispersions ............................. D & C *"Mighty Mite" Stud Driver ..................................Rem *"Moca" Curing Agent ............................................. Elas "Monastral" Pigments ............................................. Pigm "Monobel" Explosives ............................................. Expl *"Monocite" Methacrylate Monomer...................Poly "Mycoban" Calcium Propionate .......................... 1 & B "Mycoban" Sodium Propionate ........................... I&B "Mylar" Polyester Film ...........................................Film N "Nalan" Water Repellent....................................... D & C "Naphthanil" Azoic Compounds ........................ D & C "Naphthanil" Colors ............................................... D & C "Naphthanil" Dye Bases ........................................ D & C *"Naphthanil" Pigments ........................................ Pigm "Neomerpin" Surface Active Agent ....................D & C "Neozone" Rubber Antioxidants......................... Elas *Denotes unregistered trademark; all others are registered. TRADEMARKS Division or Department *"NFL" Wood Stains ............................................... Fin "Nilite" Nitro Carbo Nitrate ............................... Expl "Niox" Ammonium Nitrate....................................Expl "Nitramex" Blasting Agent .................................... Expl "Nitramite" Nitro Carbo Nitrate ........................ Expl "Nitramon" Blasting Agents ..................................Expl *"Nitxosan" Blowing Agent .................................... Expl "Nogas" Pickling Agent .........................................1 & B NuGreen" Fertilizer Conipounui ......................I <x d "NuRexform" Lead Arsenate ............................... I&B o "Ocenol" Oleyl Alcohol ........................................ D & C "Oil-Tite" Cartridges ................................................ Rem "Ondal" Oxidizing Agent ...................................... D & C "Ondelette" Rayon Yarn ........................................ Fibr "Orel" Rubber Lubricant ...................................... Fin "Orion" Acrylic Fiber.............................................Fibr "Orion Oantrece" Acrylic Yarn ...........................Fibr "Orion Sayelle" Acrylic Fiber ............................. Fibr "Ortholeum" Grease Stabilizer ............................. Pet "Ortholeum" Lubricant Assistant ........................ Pet *"OvaIite" Undercoat ............................................... Fin "Oxone" Monopersulfate Compound ................. Elcm P "Paramount" Toothbrushes .....................................Poly "'"Park Avenue" Tooth, Nail, and Handbrushes..Poly "Parzate" Fungicide.................................................I & B "Perclene" Perchlorethylene ..................................Elcm "Perdox" Sodium Borate Perhydrate ............... Elcm "Permalux" Neoprene Accelerator ...................... Elas *"Perone" Hydrogen Peroxide ............................... Elcm "Petrowet" Surface Active Agents ......................D & C "Photo-Writ" Photocopy Paper............................ Phot "Polyac" Butyl Rubber Conditioner...................Elas "Ponsol" Dyes ...........................................................D & C "Pontachrome" Dyes ............................................... D & C "Pontacyl" Dyes ...................................................... D & C "Pontamine" Developers ........................................ D & C "Pontamine" Dyes ....................................................D & C * "Power Guide" Stud Retainer ............................... Rem ""`Power-Mate" Kit ....................................................Rem "Power Matic" Gas Operated Rifles and Shotguns ..................................................................Rem "Preparakote" Primer-Surfacers .......................... Fin "Prep-Sol" Solvent ....................................................Fin "Pro-Tek" Hand Cream ........................................ Fin "Pyralux" Fluorescent Enamels .......................... Fin *"Pyrocore" Igniter Cord ........................................ Expl "PX" Book Cloth ....................................................Fab Q "Qualex" Refined Sodium CMC ........................ Expl "Quilon" Chrome Complexes ............................... I&B R '""Ramapo" Pigments ............................................... Pigm "Rangemaster" Rifle ................................ .............. Rem "Red Cross" Dynamites .........................................Expl "Rocket" Cartridges................................................ Rem "Roracyl" Dyes ........................................................ D & C 111 DUP210010903 TRADEMARKS ' Division or Department Division or Department "Rotalin" Dyes .........................................................D & C *"Rubbertone" Rubber Finish ............................... Fin "Tovex" Blasting Agent ........................................ Expl "Town & Country" Enamel ................................. Fin "Rug Anchor" Rug Underlay ............................... Fab "Triclene" Trichlorethylene...................................t-lcm "Rulan" Flame-Retardant Plastic ........................ Poly "Trysben" Weed Killer .......................................... I & B s "Scoremaster" Rifle ..................................................Rem "Seismex" Dynamites............................................... Expl :!'"Seismogel" Gelatin ..................................................Expl "Semesan" Fungicide............................................... I &B "Semesan" Seed Disinfectant ...... l&B "Semesan Bel" Dip Disinfectant .......................... I &B "Sevron" Dyes ...........................................................D & C * "Shield" Car Wax ....................................................Fin *"Tufcote" Enamel .................................................. .Fin :|!"Tufcote" Graining Ground ................................. Fin ,l!"Tufcote" Sealers (See Furniture Lacquer Sealers) ....................................................................Fin "Turtleback" Car Washing Sponge ......................Fin "Two--Sixty~Two,} Fcsd Compound l&B "Tynex" Nylon Filaments ......................................Poly "Tyzor" Organic Titanates ....................................D & C u "Shirlan" Fungicides ............................................... D & C "Shur Shot" Scatter Loads ....................................Rem "Shur Shot" Shotgun Shells....................................Rem "Sitol" Oxidizing Agent...........................................D & C *"Slipspray" Dry Lubricant ....................................Fin "Solozone" Sodium Peroxide ................................ Elcm *"Unicel" Blowing Agent ........................................ Elas *"Unicel" Blowing Agents ......................................Expl "Uramite" Fertilizer Compounds ........................I & B "Uramon" Ammonia Liquor ................................. I & B V * "Spatter-Less" Cartridges........................................ Rem "Varigam" Photographic Papers .......................... Phot *"Speed Easy" Wall Paint........................................ Fin "Varilour" Photographic Papers .......................... Phot "Speedmaster" Rifles ............................................... Rem "Velour Black" Photographic Papers .................Phot "Sportmaster" Rifle ..................................................Rem "Vexar" Plastic Netting..........................................Film "Sportsman" Shotgun ............................................. Rem "Victor" Shotgun Shells .......................................... Rem *"SSS" Seismograph Blasting Caps ...................... Expl "Victor" Spreader Loads ........................................ Rem "Stren" Monofilament Fishing Line ....................Poly "Viton" Fluoroelastomcr ........................................ Elas "Stripkolex" Dynamite ...........................................Expl "Volan" Bonding Agents ........................................ I & B "Sulfanthrene" Dyes ............................................... D & C "Vydax" Fluorocarbon Telomers ........................D & C "Sulfogene" Dyes ...................................................... D & C "Sulforon" Wettable Sulfur....................................l&B "Super Cordura" Rayon Yarn .............................Fibr "Superior" Photographic Film .............................Phot T "Target" Cartridges ..................................................Rem "Targetmaster" Cartridges ....................................Rem w *"Watchung" Pigments .............................................Pigm *"Wind-0 Band" Cellulose Seals .......................... Film "Wingmaster" Shotgun .......................................... Rem "Wonder" Skeet Outfits ...........................................Rem "Woodsmaster" Rifle ............................................... Rem "Targetmaster" Rifle ............................................... Rem "Teflon" FEP-Fluorocarbon Film ...................... Film "Teflon" FEP-Fluorocarbon Resin...................... Poly "Teflon" TFE-Fluorocarbon Fiber...................... Fibr "Teflon" TFE-Fluorocarbon Resins ....................Poly "X-12" Flame Retardant........................................I & B "Xtra-Fast" Developer.............................................Phot "Xtra-Fast" X-ray Film.......................................... Phot "Teflon" TFE-Fluorocarbon Resin Finishes ....Fin "Teflon" TFE-Fluorocarbon Resin Wire "Zalba" Rubber Antioxidant .Elas Enamels ...Fin "Zelan" Water Repellents .......................... ........... D&C "Telar" Ai ....l&B "Zelcon" Fabric Conditioner ................... ........... D & C "1'elvar" V ....l&B "Zelec" Antistatic Agents .......................... ........... D & C *"Tepidone' ....Elas "Zenite" Rubber Accelerators ................... .......... Elas "Tersan" I ....l&B "Zepar" Reducing Agent............................. .......... D & C "Tetralin" ...D & C "Zerex" Anti-Freeze .................................... .......... l&B ft; *"Tetramix"' Antiknock Compound ....Pet "Zerlate" Fungicide ...................................... .......... 1 & B "Tetrone" Rubber Accelerator ...... ....Elas "Zerone" Anti-Freeze ................................. .......... l&B "Thermofh ....Elas "Zeset" Fabric Stabilizer ........................... .......... D & C "Thionex" ....Elas "Zin-O-Lyte" Addition Agent ................... .......... Elcm ....Rem "Zin-O-Lyte" Brighteners .......................... ....l&B "Zin-O-Lyte" Salts ........................................ "Ti-Cal" Titanium Calcium Pigment ........ ....Pigm "Zobar" Weed Killer .................................... .......... l&B *"Tipersul" Fibrous Potassium Titanate .... ....Pigm "Zonyl" Alkyl Esters .................................... .......... D & C "Ti-Pure" Titanium Dioxides ...................... ....Pigm "Zonyl" Fluorochemical Surfactants ..... .......... D & C * "Tontine" Flame Resistant Vinyl Drapery "Zoron" Polymer Emulsions ...................... .......... D & C ....Fab "Zoron" Resin Finish ................................. .......... D & C "Tontine" Shade ...Fab "Zytel" Nylon Resins ................................. .......... Poly 112 ^Denotes unregistered trademark; all others are registered. DUP210010904 DUP210010905 The Alphabetical Section As in previous editions, this Section lists and locates all products ^ described in detail in the Departmental (White) Section. For con venience, the products are arranged in alphabetical sequence either by chemical name, generic name, trademark (if any), class heading or group classification. ! How To Use The Alphabetical Section These products are not listed elsewhere in this Section by their chemical names. Here's how to locate products in the Departmental Section: I B. If product bears a trademark-- I A. If the product is a member of a broad group or class-- Look for it alphabetically, e.g., "Capracyl" Dyes will be found under the C's. Where one trademark, however, covers several classes of products as with Look for the group heading, e.g., Acids, Antioxi "Duco" and "Dulux", the reference gives only the dants, Blasting Agents, Dyes, Films, Fungicides, group .headings where the specific product may Leather Processing Agents, Photographic Paper, be found. Pigments, Plastics, Rifles, Solvents, Surface Active Agents, Varnishes, etc. This will give you either: 1. Page reference only for the entire group of these products, if they appear close together in the White Section, e.g., Blasting Accessories, p. 14, 15, 16 C. If you know the generic name of a product-- Look for it alphabetically, e.g., Colloidal Silica, p. 53, 54 (See "Ludox"). If, however, the generic is the same as that of a broad class, e.g., Car tridges, Surface Active Agents, etc., then the pages are given on which the products appear. Dyes, p. 66, 67, where all dyes are listed alphabetically r D. If the product is a Chemical Salt-- or Look for it under the name of the metal rather 2. Detailed listing and page numbers for indi vidual products that fall on pages widely sepa rated in the White Section, e.g., under the class than the acid radical, e.g., Ammonium Nitrate appears under Ammonium, Sodium Nitrate is under Sodium, etc. heading Acid, you will find: Products such as Sodium Carboxymethyl Cellulose Adipic, p. 48 which are better known by their organic residue Phosphoric, p. 55 (Carboxymethyl Cellulose) are listed under both the Terephthalic, p. 20, etc. metal (Sodium) and the organic residue. DUP210010906 PRODUCTS Accelerators For Natural and Synthetic Rubber, 1, 2 Short Stop (See Sodium Dimethyl Dithiocarbamate), 56 "Acele" Acetate Fiber, 104 Acetal Resins (See "Delrin"), 93 5-Acetamido-8-amino-2-naDhthalenesulfonic acid Tech., 71 ' 8-Acetaniido-5-amino-2-naphthalenesulfonic acid Tech., 71 8-Acetamido-2-naphthalenesulfonic acid, magnesium salt Tech., 71 "Acetamine" Developer, 67; Dyes, 66 Acetate, Cellulose -- Fiber, 104 -- Film, 45 -- Flake, 19 -- Yarn, 104 Acids Acetic, 48 Adipic, 48 Battery, 50 Chlorosulfonic, 50 Diglycolic, 50 Engraver's (See Nitric Acid), 51 Formic, 52 Glycolic (See Hydroxyacetic Acid), 52 Hydrochloric, 52 Hydrofluoric, 52 Hydroxyacetic, 52 Lactic, 53 Methionine, (See "Hydan"), 63 Mixed, 19 Muriatic (See Hydrochloric), 52 Nitric, Reagent, Tech., and Engraver's, 54 Phosphoric, N. F., Tech., and Food Processing, 55 Pyromellitic, 20 Sulfamic, 57 Sulfuric, (Various Grades) 20, 51, 55, 57 Terephthalic (TPA), 20 Acrylic Fibers (See "Orion"), 104 Acrylic Resin (See "Lucite"), 6, 93, 94 Acrylic Resin Coated Fabrics, etc. (See "Lecton"), 23 Acrylic Resin Dental Materials (See "Lucite"), 94 Acrylic Resin Wire Enamel (See "Lecton"), 31 Activator, Butyl Rubber (See "Polyac"), 4 "Acudet" Blasting Caps, 14 Addition Agents (Plating), 8, 9 Adhesives (See also Cements) Adhesives No. 60, No. 77, No. 78 and 78X, 48 Bookbinding (See Hot Melt, etc.), 30 "Duco" Cement, 35 "Lucite", 6 "Ludox", 53 Methacrylates, 6 Mineral Adhesive Solution--Tech., 54 Polyvinyl Acetate (See "Elvacet"), 12, 13 Polyvinyl Alcohol (See "Elvanol"), 13 Adhesives (continued) Sodium CMC, 20 Sodium Silicate Solution, 56, 57 "Adiprene" Urethane Rubber, 4 "Adlux" Photographic Film, 89 Aerosol Propellants (See "Freon"), 79, 80 (See also Methyl Chloride, Methylene Chloride), 8 Agricultural Chemicals (See Emulsifying Agents, Fungicides, Insecticides, Weed Killers, etc.) Air Tools, 100 "Akroflex" Rubber Antioxidants, 2 "Alathon" Polyethylene Resins, 93 "Albone" Hydrogen Peroxide, 10 Alcohols Cetyl (See "Lord" 24), 53 Decyl (See "Lorol" 22), 53 Dodecyl (See "Lorol" 5 and "Lorol" 7), 53 Fatty (See "Lord" Fatty Alcohols), 53 Lauryl (See "Lorol" 5 and "Lord" 7), 53 . "Lorol" Fatty Alcohols, 53 Methyl, 54 n-Octanol (See "Lorol" 20), 53 Polyvinyl (See "Elvanol"), 13 Stearyl (See "Lord" 28), 53 "Alkanol" Surface Active Agents, 67, 68 Aluminum Ammonium Sulfate, 49 -- Chloride, 49 -- Potassium Sulfate, 49 -- Sulfate, 49 Aluminum Cleaner, 28 Aluminum Complex, 49 Aluminum Powder, Paste, 31 Alums, 49 Amine 248, 49 2,4-D Amine (See Lawn Weed Killer), 65 p-Aminoacetanilide Tech., 71 5-Amino-2-(p-aminoanilino)benzenesulfonic acid Tech., 71 1-Aminoanthraqumone Tech., 71 2-Aminoanthraquinone Tech., 71 N-(5-Amino-1 -anthraquinonyl)anthranilic acid Tech., 71 N-(8-Amino-l-anthraquinonyl)anthranilic acid Tech., 71 4-Aminoazobenzene-3,4'-disulfonic acid Tech., 71 4-Aminoazobenzene hydrochloride Tech., 71 4-Aminoazobenzene-4'-sulfonic acid Tech., 71 Aminoazotoluene Tech., 71 l-Amino-4-benzamidoanthraquinone Tech., 72 l-Amino-5-benzamidoanthraquinone Tech., 72 6-(p-(p-Ammobenzamido)benzamido)-l-naphthol3-sulfonic acid Tech., 72 6-(m-Aminobenzamido)-l -naphthol-3-sulfonic acid Tech., 72 6-(p-Aminobenzamido)-l-naphthol-3-sulfonic acid Tech., 72 5-Amino-2(3H)-benzimidazolone Tech., 72 p-Aminobenzoic acid Tech., 72 115 DUP210010907 PRODUCTS l-Amino-4-bromo-2-anthraquinonesulfonic acid, sodium salt Tech., 72 l-Amino-4-bromo-2-methylanthraquinone Tech., 72 1-Amino-2-bromo-4-p-toluidinoanthraquinone Tech., 72 1 -Amino-5-chloroanthraquinone Tech., 72 1 -Amino-8-chloroanthraquinone Tech., 72 2-Amino-l-chloroanthraquinone Tech., 72 2-Amino-4-chloropneEoI Tech., 72 1-Amino-2,4-dibromoanthraquinone Tech., 72 5-Amino-2-(2,3-dihydro-2-oxo-5-benzimidazolylamino) benzenesulfonic acid Tech., 72 p-Aminodiphenylamine Tech., 72 l-Amino-4-hydroxyanthraquinone Tech., 72 i-Amino-4-methoxyanthraquinone Tech., 72 m-(4-Amino-3-methoxyphenylazo)benzenesulfonic acid Tech., 72 l-Amino-2-methoxy-4-(p-toIylsuifonamido)anthra- quinone Tech., 72 1-Amino-2-methylanthraquinone Tech., 72 l-Amino-2-methyl-4-p-toluidinoanthraquinone Tech., 72 l-Aminonaphth(2,3-c)acridine-5,8,14(13H)-trione Tech., 72 4-Aminonaphth(2,3-c) acridine-5,8,14(13 H)-trione Tech., 72 6-Amino-l,3-naphthalenedisulfonic acid, disodium salt Tech., 72 7-Amino-l,3,-naphthalenedisulfonic acid, dipotassium salt Tech., 72 4-Amino-l,6(and 1,7)-naphthalenedisulfonic acid, Tech., 72 7-amino-l,3,6-naphthalene trisulfonic acid, disodium salt Tech., 72 4-Amino-l,3,5-naphthalenetrisulfonic acid, 4,5-sultam, trisodium salt Tech., 72 l-Amino-7-naphthol Tech., 72 l-Amino-6-naphthol Tech., 72 l-Amino-6-(and 7)-naphthol Tech., 72 1-Amino-2-naphthol-4-sulfonic acid Tech., 72 p-Aminophenol Tech., 72 2-Arnino-l-phenol-4-sulfonamide Tech., 72 2-Amino-l-phenol-4-suIfonic acid Tech., 72 l-(ni-Aminophenyl)-3-methyl-5-pyrazolone hydrochloride Tech., '72 1-(m-Aminophenyl)-5-oxo-2-pyrazoline-3-carboxylic acid Tech., 72 2-Aminotoluene-5-sulfonic acid, sodium salt Tech., 72 5-Amino-o-toluenesulfonic acid Tech., 72 5-Amino-2-(p-toluidino)benzenesulfonic acid Tech., 72 4-(4-Amino-m-tolylazo)-m-toluenesuIfonic acid Tech., 72 "Ammate" Weed and Brush Killers, 61 Ammonia, 49 Ammonia Liquors (See "Uramon"), 63 Ammoniacal Liquor, 49 Ammonium Chloride, 49 -- Hydroxide (See Ammoniacal Liquor), 49 -- C. P. Reagent and 26, 49 Ammonium Chloride (continued) -- Nitrate, 19 -- Sulfamate, 49 -- (See also "Ammate"), 61 -- Sulfate, 63 -- Technical, 49 Ammunition, 97, 98, 101, 102 Anatase (See "Ti-Pure"), 92 Aniline, 19 Aniline-2,5-disulfonic acid Tech., 72 l-Anilino-2-anthraquinonecarboxylic acid Tech., 72 l-Anilino-4-hydroxyanthraquinone Tech., 72 p-Anilinophenol Tech., 72 o-Anisidine Tech., 72 p-Anisidine Tech., 72 o-Anisidinomethane sulfonic acid, sodium salt, Tech., 72 0-Anisidinomethane sulfonic acid, sodium salt Tech., 72 Anisole--Tech., 49 Anthraflavic acid Tech., 72 Anthranilic acid Tech., 72 Anthra(l,9)pyrazol-6(2H)-one Tech., 72 1.5-Anthraquinonedisulfonic acid, disodium salt Tech., 72 1,8-Anthraquinonedisulfonic acid, disodium salt Tech., 73 2.6-Anthraquinonedisulfonic acid, disodium salt Tech., 73 1- Anthraquinonesulfonic acid, sodium salt Tech., 73 2 Anthraquinonesulfonic acid, sodium salt Tech., 73 N,N'-1,5-Anthraquinonylenedianthranilic acid Tech., 73 1,1 '-(1,5-Anthraquinonylenediimino)dinaphth(2,3-c) acridine-5,8,14(13H)-trione Tech., 73 (l-Anthraquinonyl)-l ,2-hydrazinedisulfomc acid, disodium salt Tech., 73 Anthrarufin Tech., 73 Antifoam Agents (See also Textile Specialties and "Lorol" 22, 24, 28), 53 Anti-Freezes, 59 Anti-Fume, 67 Antifume Agent, Zinc Plating (See Addition Agent 774), 8 Antiknock Compounds, 82, 83 Antioxidants, Gasoline and Oil, 82 -- Natural and Synthetic Rubber, 2 Anti-Pit Agents, Plating, 8, 9 Anti-Rust and Water Pump Lubricant (Liquid), 34 Antiseptics (See Disinfectants, Fumigants, and Germicides) Sodium Sulfite, 57 Anti-Soil (See "Ludox"), 53, 54 Antistall Additive, DMF, 81 Antistatic Agents, 69 "Antox" Rubber Antioxidant, 2 "Antron" Multifilament Yarn, 104 Aphid and Mite Spray, 64 Aqua Fortis (See Nitric Acid--Tech, and Engraver's Quality), 54 DUP210010908 PRODUCTS "Aquarex" Surface Active or Mold Release Agents, 2, 3 "Arasan" Seed Disinfectants, 61,62 "Aridex" Water Repellents, 69 "Arlton" Combs (See Combs, Brushes and Toothbrushes), 95 "Armalon" TFE-Fluorocarbon Coated Glass Fabrics; Felts, etc., 23 "Artie" Methyl Chloride (See Methyl Chloride), 8 "Auric" Ferric Oxide (See Pigment Colors), 91 "Automaster" Shotgun, 96 "Auto Angling" Trap, 98 Automotive Refinishing Materials, 28 "Avitex" (Various), 69 "Avitone" Softeners, 69 Azide, Lead, 19 4'4'"-Azobis-4-biphenylcarboxylic acid, disodium salt Tech., 73 Azoic Compounds (See "Naphthanil"), 67 Azo Yellow (See "Dalamar"), 91 B Bands, "Cel-O-Seal", 47 "Barak" Rubber Accelerator, 1 Battery Acid, 50 BCO Surface Active Agent (See Product BCO), 70 Belt Material "Armalon" Coated Glass Fabrics, Tapes, etc., 23 4-(4-Benzamido-1 -anthraquinonylamino)naphth(2,3-c)- acridine-5,8,14(13H)-trione Tech., 73 l-Benzamido-4-chloroanthraquinone Tech., 73 l-Benzamido-5-chloroanthraquinone Tech., 73 Benzanilide Tech., 73 7H-Benz(de)anthracen-7-one Tech., 73 o-Benzoylbenzoic acid Tech., 73 Beta Naphthol, 67 (3,3'-Bi-7H-benz[de]anthracene)-7,7'-dione Tech., 73 (4,4,-Bi-7H-Benz[de]anthracene)-7,7'-dione Tech., 73 (l,T-Bmaphthalene)-8,8,-dicarboxylic acid Tech., 73 Binders (See Vinyl Products), 12 Binding Material (See "Fabrikoid"), 22 1.4-Bis( 1 -anthraquinonylamino)anthraquinone Tech., 73 1.5-Bis(l-anthraquinonylamino)anthraquinone Tech., 73 4,4'-Bis(diethylamino)benzophenone Tech., 73 4,4'-Bis(dimethylamino)benzhydrol Tech., 73 4,4'-Bis(dimethylamino)benzophenone Tech., 73 1.5- Bis(2,4-dinitrophenoxy)-4,8-dinitroanthraquinone Tech., 73 l,4-Bis(2,4,6-triethylanilino)anthraquinone Tech., 73 Blasting Accessories, 14, 15, 16 Blasting Agents, 17 Bleaching Agents Peroxides, etc., 10, 11 Sodium Sulfite, 57 Bleaching Assistants (See Textile Specialties), 68, 69 (See also Sodium Silicate), 56, 57 Block-Moisture Control, 36 Blowing Agents "Freon" Blowing Agent, 79 "Nitrosan" Blowing Agent, 20 "Unicel" Blowing Agents, 3, 20, 21 Urea, 58 "Blue Rock" Skeet Outfit, Targets, Traps, 98 Blue Vitriol (See Copper Sulfate), 50 Body Stains, 7 Book Cloth (See "PX"), 22 Bookbinding Adhesives (See Hot Melt, etc.), 30 Brake Fluids, Heavy Duty, 34 Bright Dip Plating (See "Cadalyte"), 9 Brighteners, Plating, 9 Bristles, Nylon, 77 3-Bromo-7H-benz(de)anthracen-7-one Tech., 73 1-Bromo-4-methylaminoanthraquinone Tech., 73 2-Bromo-3-methylanthraquinone Tech., 73 1-(9-Bromo-7-oxo~7H-benz[de]anthracen-3-ylamino) anthraquinone Tech., 73 o-(3-bromo-p-toluoyl) benzoic acid Tech., 73 2-Bromo-l,3,5-triethylbenzene Tech., 73 Bronzing Liquids, 31 Brown Gold (Gold Powders), 7 Brush Killers, 61 Brushes (See Toiletries), 95 Buckshot Loads (See "Express"), 97 "Budium" Can Coatings, 30 Bug Remover, 34 Burnish Golds, 7 "Butacite" Polyvinyl Butyral Resin, 75 Butanol Formaldehyde, 50 Butter of Zinc (See Zinc Chloride), 58 p-Butylaniline Tech., 73 2-tert-Butylanthraquinone Tech., 73 Butyl Rubber Activator (See "Polyac" and "Antox"), 2, 4 "Cadalyte" Bright Dip, Brightener, etc., 9 Calcium Peroxide, 10 -- Propionate (See "Mycoban"), 50 Can Coatings (See "Budium"), 30 "Capracyl" Dyes, 66 Caprolactam, 19 `Captain's Combo" Sponges, 37 "Captive Stud" Kit, 98 Car Soap, 34 Car Upholstery Cleaner, 35 Car Wash, 34 Car Wax (See New Car Wax), 35 Carbonate Remover, 9 117 DUP210010909 PRODUCTS N,N'-Carbonylbis(4-methoxymetanilic acid),-- 5-Chloro-o-anisidine Tech., 73 disodium salt Tech., 73 l-Chloroanthraquinone Tech., 73 Carboxymethyl Cellulose (See "Qualex"; Sodium 1- Chloro-2-anthraquinonecarboxylic acid Tech., 73 CMC), 20 Chlorobenzene Tech., 73 Cartridges, 97, 98, 102 0- (p-Chlorofaenzoyl)benzoic acid Tech., 73 Carrier (See "Latyl"), 67 i: Caustic Soda (See Sodium Hydroxide), 56 "Celanthrene" Dyes, 66 Cellophane, 45 Cellulose Acetate (See Acetate Flake), 19 2- Chloro-N,N'-diethyl-4-nitroaniline Tech., 73 .Q v'uipiivA'imijrrl nrvnn A * I 'Vi aw h .; T _^ Chloroform, 8 4-Chlorometanilic acid Tech., 73 1 -Chloro-2-methylanthraquinone Tech., 73 Cellulose Bands and Seals (See "Cel-O-Seal"), 47 2-Chloro-4-nitroaniline Tech., 73 Cements (See also Adhesives) All Purpose Sealer, 34 Belt, 30 Bookbinders (See Vinyl Products), 12 4-Chloro-2-nitroaniline Tech., 73 4-Chloro-2-nitroanisole Tech., 74 1- Chloro-5-nitroanthraquinone Tech., 74 (See also Hot Melt Bookbinding Adhesives), 30 1 -Chloro-8-nitroanthraquinone Tech., 74 Cork (See Vinyl Products), 12 "Duco", 35 "Fairprene", 23 Household, 30 Industrial, 23 Oil-Proof (See Vinyl Products), 12 Padding (See Vinyl Products), 12 4-Chloro-3-nitrobenzenesulfonamide Tech., 74 2- Chloro-5-nitrobenzenesulfonic acid, sodium salt Tech., 74 4-Chloro-2-nitrophenol Tech., 74 4-Chloro-2-nitrotoluene Tech., 74 4(and 6)-Chloro-2-nitrotoluene Tech., 74 Polyvinyl Acetate (See "Elvacet"), 12, 13 6-Chloro-2-nitrotoluene Tech., 74 Polyvinyl Alcohol (See "Elvanol"), 13 Pyroxylin, 30 Sodium Silicate, 56, 57 Special, 25, 30 Thermoplastic, 30 4-Chlorophthalic acid Tech., 74 Chloroprene (See Neoprene), 4, 5 6-Chloroquinaldine Tech., 74 6-Chloroquinophthalone Tech., 74 Waterproof Chlorosulfonated Polyethylene (See "Hypalon"), 5 -- Belt Cement, 30 --"Duco" Cement, 35 -- Household Cement, 30 Ceramic Products, 6 "Ceresan" Disinfectants, 62 Cetyl Alcohol (See "Lorol" 24), 53 l-(2-Chloro-5-sulfophenyl)-3-methyl-5-pyrazolone Tech., 74 (4-Chloro-o-tolylmercapto)acetic acid Tech., 74 2-Chloro-p-xylene Tech., 74 `Chromacyl" Dyes, 66 Cetyl Betaine Chromated Zinc Chloride (See CZC), 50 --"Aquarex", 2 -- Product BCO Surface Active Agent, 58 Chain Saws and Accessories, 99 Chemical Intermediates (See individual chemicals alphabetically) Chrome Complexes, 50 (See also "Quilon"), 55 Chrome and Metal Polish, 34 Chrysazin Tech., 74 Circular Saws, 100 Chicago Acid Tech., 73 Chile Saltpeter (See Sodium Nitrate), 56 Chlordane Dust, 64 Chlorinated Hydrocarbons (See Chlorine Products), 8 4-Chloro-2-aminobenzoic acid Tech., 73 Cleaners (See also Detergents; Dry Cleaning Fluids) Aluminum, 28 Auto (various), 34, 35, 36 Bilge, 36 Boat Bottom, 36 Engine, 37 2-Chloro-4-aminotoluene Tech., 73 4-Chloro-2-aminotoluene Tech., 73 6-Chloro-2-aminotoluene Tech., 73 m-Chloroaniline Tech., 73 o-Chloroaniline Tech., 73 Fiberglas, 37 Gun and Equipment Cleaner, 26 Hand (See Waterless Hand Cleaner), 36 "Prep-Sol", 29 Speedy, 35 Windshield (Plastic), 37 p-Chloroaniline Tech., 73 Chloroanilines Mixed Tech., 73 Cleaning Fluids (See Perchlorethylene and Trichlorethylene), DUP210010910 Clears (See also Varnishes) Bronzing Liquid, 24 "Duco" Furniture Lacquer, 31 "Dulux" Clear, 31 "Dulux" Wood Finish, 31 Foil Lacquers, 31 Metal, 24 Wood, 24 Cleve's Acid 1,6 Tech., 74 Cleve's Acid 1,7 Tech., 74 Cleve's Acid Mixed Tech., 74 "CM" Flame Retardant, 50 CMC (See Sodium CMC), 20 Coated Fabrics, 22 Coatings (See also Enamels, Lacquers, Paints, and Varnishes) Can (See "Budium"), 30 Ceramic and Glass (See Ceramic Products), 6 Chemical Resistant, 39 Conductive, 6, 7 Fabric "Lucite", 6 Flexible "Butacite", 93 "Elvacet" and "Elvanol", 12, 13 Paper "Alathon", 93 "Elvacet" and "Elvanol", 12, 13 "Ludox", 53, 54 Strippable, 32 Textile "Butacite", 93 Cellulose Acetate (See Acetate Flake), 19 "Elvacet" and "Elvanol", 12, 13 Wire Cellulose Acetate (See Acetate Flake), 19 "Rulan", 94 "Teflon", 32 "Zytel", 95 Colloidal Silica (See "Ludox"), 53, 54 Color Conditioning, 39 Colors (See also Dyes, Pigments, Paints) Ceramic, 6 Coated Fabrics and Coated Paper (See Pigment Colors), 91 "Duco" Mixing and Tinting Colors, 28 "Dulux" Mixing Enamels, 28 Gasoline, 82 Ink (See Pigment Colors), 91, 92 Leather (See Pigment Colors), 91, 92 Linoleum (See Pigment Colors), 91, 92 Paint (See Pigment Colors), 91, 92 (See also "Duco", "Dulux"), 28 Paper (See Pigment Colors), 91, 92 (See also "Halopont"), 66 (See also "Monastral"), 66 PRODUCTS Colors (continued) Pigment, 91, 92 Rubber (See Pigment Colors), 91, 92 (See also Colors for Rubber), 4 Textile (See Dyes), 66 Universal Tinting, 44 Wallpaper (See Pigment Colors), 91, 92 Columbium Metal, 92 "Combo" Synthetic Sponge, 36, 37 Combs ("Lido", "Arlton", "LaBelle", etc.), 95 Compounds "Duco" Polishing or Rubbing Compound, 25, 29 Masking Compound, 29 "7" Rubbing Compound, 35 Shielding Compound, 25 White Polishing (Auto), 36 Conac Rubber Accelerator, 1 Conditioner, Butyl Rubber (See "Polyac"), 4 Conductive Silver Preparations, 6 Cooling System Cleaner and Sealer, 34, 35 Copper Cyanide, 9 Copper Inhibitor, 4 Copper phthalocyanine Tech., 74 Copper phthalocyanine, semichloro Tech., 74 Copper Sulfate, 50 Copper tetra(4)aminophthalocyanine Tech., 74 Copper tetra(4)nitrophthalocyanine Tech., 74 Coppcr-A Compound, 60 "Coppralyte" Products, 9 "Cordura" Rayon Yarns, 104 "Core-Lokt" Bullets, 102 Cresidine Tech., 74 "Cronaflex" Photographic Films, 88 "Cronapaque" Print Film, 89 "Cronar" Polyester Photographic Film and Film Base, 84-88 Curing Agent (See "Moca"), 4 Cyanide Products and Mixtures, 8, 9, 11 8-Cyano-l-naphthalenesulfonic acid, sodium salt Tech., 74 Cyclohexanol (See "Hexalin"), 52 Cyclohexanone (See "Hytrol"), 53 Cyclohexylamine (CHA), 19 Cyclotrimethylenetrinitramine, 19 CZC Chromated Zinc Chlorides, 50 "Dacolyte" Addition Agent, 9 "Dacron" Polyester Fiber, 104 "Dalamar" Azo Yellow, 91 Dairy Cattle Insecticide, 60 DDT Insecticides, 60, 64 119 DUP210010911 PRODUCTS "Decalin" Solvent, 71 Decanol (See "Lorol" 22), 53 "Deenate" Insecticide, 60 Degreasing Compounds "Freon 11", "Freon 113", 79, 80 "Hydraphtal", 69 Perchlorethylene, 8 Tl~x'_i:w~Ex1ic--'i--CoLiiy o Dehydrothio-p-toluidine Tech., 74 Dehydrothio-p-toluidine sulfonic acid Tech., 74 "Dekatyl" Dyes, 66 Delay Units (See "Elcord"), 15 "Delrin" Acetal Resins, 93 "Dels an" Seed Protectant, 62 "Dentabest" Toothbrushes (See Toothbrushes), 95 Deodorants Formaldehyde Solution, 51 Paraformaldehyde, 55 Zinc Peroxide, 11 . Detergents (See also Fatty Alcohol Sulfates; Surface Active Agents; Textile Processing Agents and Cleaners) Sodium Carbonate, 56 Metasilicate, 56 Phosphate, 56 Developing Agents, Dye "Acetamine" Developer, 67 Beta Naphthol, 67 Hydrogen Peroxide, 10 "Pontamine" Developers, 67 Sodium Perborate Tetrahydrate, 11 "DH" Dehydrated Photographic Emulsion, 88 "Diagen" Dyes, 66 1.4-Diaminoanthraquinone Tech., 74 1.5-Diaminoanthraquinone Tech., 74 l,5(and 1,8)-Diaminoanthraquinone Tech., 74 2.6-Diaminoanthraquinone Tech., 74 4.8-Diaminoanthrarufin Tech., 74 1.4-Diamino-2,3-dichloroanthraquinone Tech., 74 1.4-Diamino-2,3-dihydroanthraquinone Tech., 74 3.6-Diamino-2,7-dimethyIacridine Tech., 74 3.6-Diamino-2,7-dimethylacridine sulfate Tech., 74 4,4'-Diamino-2,2'-stilbene-disulfonic acid Tech., 74 o-Dianisidine Tech., 74 1.5-Dibenzamidoanthraquinone Tech., 74 Diazo Dyes (See "Pontamine"), 67 Diazo Pigment Colors (See "Naphthanil"), 91 4,5'-Dibenzamido-l,l'-iminodianthraquinone Tech., 74 N,N-Dibenzylaniline Tech., 74 3.9-Dibro.mo-7H-benz(de)anthracen-7-one Tech., 74 Dibromo-8,16-pyranthrenedione Tech., 74 2.5-Dichloroaniline Tech., 74 3.4- Dichloroaniline Tech., 74 2.5- Dichloroaniline-4-sulfonic acid Tech., 74 1.5- Dichloroanthraquinone Tech., 74 l,5(and 1,8)-Dichloroanthraquinone Tech., 74 1,8-Dichloroanthraquinone Tech., 74 2.6- Dichlorobenzal chloride Tech., 74 1.4- Dichlorobutane (Tetramethylene Chloride), 10 1.4- Dichlorobutene, 50 N,N'-(2,5-Dichloro-3,6-dioxo-p-phenylene)bis(6- (2(3H)-oxo-5-benzimidazolylamino)metanilic acid) Tech., 74 2.5- Dichloro-4-(3-methyl-5-oxo-2-pyrazolin-l-yl) benzenesulfonic acid Tech., 74 2.6- Dichloro-4-nitroaniline Tech., 74 1.4- Dichloro-2-nitrobenzene Tech., 74 3.4- Dichloronitrobenzene Tech., 75 2.6- Dichlorotoluene Tech., 75 Dieldrin (See "Delsan"), 62 Dielectric Gas (See "Freon" C-318), 80 Diethylamine, 50, 63 2-Diethylaminoethyl methacrylate MS Tech., 75 N,N-Diethyl-m-aminophenol Tech., 75 N,N-Diethylaniline Tech., 75 N,N-Diethylcyclohexylamme Tech., 75 N,N-Diethylmetanilic acid, sodium salt Tech., 75 N,N-Diethyl-l-naphthylamine Tech., 75 N,N-Diethyl-m-toIuidine Tech., 75 1,1-Difluoroethane, 79 2.3- Dihydro-l, 4-bis(methylamino)anthraquinone Tech., 75 2.3- Dihydroquinizarin Tech., 75 Dihydroxyviolanthrone Tech., 75 1.3- Dimethoxybenzene Tech., 75 Dimethyl Acetamide (DMAC), 51 Dimethylamine, 51, 63 N,N-Dimethylaniline Tech., 75 2,2,-Dimethyl-l,T-bianthraquinone Tech., 75 Dimethyl Formamide, 51 Dimethyl Sulfate, 51 Dimethyl Terephthalate, 19 N,N-Dimethyl-m-toluidine Tech., 75 m-Dinitrobenzene 89 Tech., 75 Dinitro-(3,3'-bi-7H-benz(de)anthracene)-7,7'-dione Tech., 75 3.5- Dinitrobenzoic acid Tech., 75 2.4- Dinitrochlorobenzene Tech., 75 Dinitrochrysazin Tech., 75 4.5- Dinitro-2,7-chrysazindisulfonic acid, disodium salt Tech., 75 2.4- Dinitro-4'-hydroxydiphenylamine Tech., 75 2.4- Dinitrophenol Tech., 75 DUP210010912 PRODUCTS 4,4'-Dinitro-2,2'-stilbenedisuIfonic acid disodium salt Tech., 75 2.4-Dinitrotoluene Tech., 75 Dinitrotoluene Mixture Tech., 75 1.4-Di-p-toluidinoanthraquinone Tech., 75 Di-o-tolylquanidine Tech., 75 Di-o-tolylthiourea Tech., 75 Diphenylamine, 19, 63 Disinfectants (See Fumigants, Germicides, Seed Disinfectants, and Soil Disinfectant) Dispersing Agents (See Surface Active Agents), 67, 68 "Dissolvo" Tar and Road Oil Remover, 35 DMA--Dimethylamine, 51 DMAC--Dimethyl Acetamide, 51 DMF--Dimethyl Formamide (See also Antistall Additive), 51, 81 Dodecanol (See "Lorol" 5 and "Lorol" 7), 53 Dormant Spray Oil, 64 DOTG Rubber Accelerator, 1 Drapery Material (See "Tontine"), 22 Dressings Tree Wound, 65 Rubber, 34 Driers (For Finishes), 31 Driers (Air), 100 Dry Cleaning Fluids Dry-Clean (Spot Remover), 35 "Perclene", 8 "Triclene", 8 "Duclean" Inhibited Acids, 51 "Duco" and "Dulux" (See under group classifications, e.g., Enamels, Lacquers, Varnishes, Putties, etc.) "Duco" Cement, 35 "Dulite" Wood Bleach, 31 "Duobel" Permissible Explosives, 16 "Duol" Pigments, 91 "Duponol" Surface Active Agents, 68, 69, 70 "Durobrite" Addition Agent, 9 "Dybar" Weed Killer, 61 "Dycril" Photopolymer Printing Plates, 90 Dye Intermediates (See Individual Chemicals, Alphabetical) Dyeing Auxiliaries, 67 Dyes (See also Colors, Pigments), 66, 67, 82 Dynamites, 16, 17 ELA Elastomer Lubricating Agent, 4 Electroplating Products, 8, 9 "Elvacet" Polyvinyl Acetate Emulsions and Solutions, 12, 13 "Elvanol" Polyvinyl Alcohol, 13 "Elvax" Vinyl Resins, 13 Emulsifying Agents (See Surface Active Agents and Textile Specialties), 67, 68 "Elvanol", 13 Emulsifying Agent A, 63 "Lorol" 24, 53 Rubber, 3 Enamel Pigments, 7 Enamels (See also Lacquers, Paints, and Varnishes) Alkali-Resistant, 40 Anti-Wrinkle Agent, 28 Asphaltums, 30 "Black Jack", 40 Chassis Black, 25, 28 Color Conditioning Interior Flat Wall, 40 "Duco" Gloss, Satin Sheen, Spray Magic, 40 "Duco" Lacquer, 31 "Duco" Lacquer Metalli-Chrome, 31 "Dulux" Bulletin, 40 "Dulux" Color Conditioning Enamels, 40 "Dulux" Enamel and Paint Type Pigmented Finishes, 31 "Dulux" Automotive, 26, 29 "Dulux" Enamel Reducers, 29 "Dulux" High Bake (See Refrigerator and Washing Machine Finishes), 32, 23 "Dulux" Maintenance Enamels, 40 "Dulux" Marine Finishes, 42 Metallic, Non-Metallic, 29 "Dulux" Mill White, 41 "Dulux" "Ovalite" Undercoat, 41 "Dulux" Refrigerator, 29 "Dulux" Sign, 32 "Dulux" Super-White, 41 "Dulux" Tank, 43 Engenamel, 31 Fender, 25 Fish Eye Eliminator, 29 "Flintflex", 31 Floor (See Alkali-Resistant), 40 Formvar, 31 Gas-Tank, 25 Glass, 6 Gloss, 41 Implement (See Tractor and Implement Enamels), 29 Industrial, 31 Inside Body Gray, 28 "Lecton" Wire Enamels, 31 "Lucite" (Industrial), 31 Mildew-Resistant Undercoat, 41 Motor, 25, 29 Porch and Floor, 41 "Pyralux" Fluorescent, 29 Reducers ("Dulux"), 28 Sanitary Gloss, 41 Sash and Screen Paint, 35 121 DUP210010913 PRODUCTS Enamels (continued) Sign Finishes, 32 Small Parts Dip, 26 Tractor, etc., 29 "Teflon" (See Wire Enamels), 33 Tin Decorating Finishes, 32 "Town and Country", 41 Tractor and Implement, 29 "Tufcote" Heavy Duty Wall, 41 Wire (See Formvar, "Lecton", "Teflon"), 31, 32, 33 "Endor" Rubber Peptizing Agent, 3 Engineering Reproduction Films, 87, 88 EPN-300 Insecticide, 60 6-Ethoxy-2-mercaptobenzothiazole Tech., 75 2-Ethoxy-1 -naphthylamine Tech., 75 2-Ethoxy-1-nitronaphthalene Tech., 75 3-Ethylamino-p-cresol Tech., 75 "Fairprene" Coated Fabrics; Sheet Stocks, 23 Fast Flush, 35 Fatty Alcohols (See "Lorol"), 53 Feed Compounds (See "Two-Sixty-Two"), 63 Feed Ingredients (See Nutrition Products), 63 Felt (See "Armalon"), 23 "Fermate" Ferbam Fungicide. 60, 64 Ferric Oxide, Hydrated (See "Auric"), 91 Ferrous Sulfate, 51 Fertilizers Ammonium Sulfate, 63 "NuGreen", 63 "Uramite", 63 "Uramon", 63 Fiber Lubricants, 69 Fibers, 104 3-Ethylamino-p-toluenesulfonic acid Tech., 75 Fibrous Potassium Titanate, (See "Tipersul"), 92 N-Ethylaniline Tech., 75 "Fieldmaster" Rifle, 97 alpha-(N-Ethylanilino)-m-toluenesulfonic acid Tech., 75 N-Ethyl-N-benzylaniline Tech., 75 N-Ethyl-N-benzyl-m-toluidine Tech., 75 N-Ethyl-alpha-naphthylamine Tech., 75 N-Ethyl-m-toluidine Tech., 75 N-Ethyl-o-toluidine Tech., 75 alpha-(N-Ethyl-m-toluidino)-m-toluenesulfonic acid Tech., 75 "Eureka" Soldering Flux, 51 "Expert" Trap, 98 Explosive Rivets (See Aircraft and Industrial Rivets), 20 Explosives, 16 "Express" Buckshot Loads, Cartridges, Shells, etc., 97 "Extra" Dynamite (See "Red Cross" "Extra"), 16 Fillers, Wood "Dulux" Paste Filler, 27 Metal, 31 Paste Wood Filler, 43 Wood Fillers, Industrial, 32 Films Acetate, 45 Cellophane, 45 Dosimeter, 86 Industrial and Graphic Arts, 87 Motion Picture, 84, 85 Packaging, 45, 46 Polyethylene, 46 Screen Process, 87 Sheet, 88 Special Products, 89 X-ray, 85, 86 F Filter Fabrics (See "Armalon"), 23 "F-ll", "F-12", "F-13", etc., Refrigerants, Propellents, etc., 79, 80 Filters, Diffraction, 87 Filters, Plastic, 90 F Salt Tech., 75 Finishes (See also Enamels, Lacquers, Paints and Fabric Cleaners (See Spot Remover), 35 Fabric Conditioner (See "Zelcon"), 71 Fabric Stabilizer (See "Zeset"), 70 Fabrics Varnishes) Airplane, 30 "Duco" Anti-Rust, 42 "Dulux" Clear Exterior, 28, 31 "Dulux" Enamel and Paint Type, 31 Pyroxylin Coated and Impregnated, 23 "Dulux" Marine, 42 Rubber and Synthetic Rubber (See "Fairprene"), 23 "Dulux" Wood, 31 Silicone Coated, 23 Epoxy Chemical Resistant, 39 Synthetic Resin "Armalon", "Fabrilite" and "Lecton", 22, 23 Floor, 41 Furniture, 28, 31 "Fabrikoid" Pyroxylin Coated Fabrics, 22 Implement, 31 "Fabrilite" Unsupported Vinyl Material, 22 "Fabrilite" Vinyl Coated Fabrics, 22 i .1 "Fairprene" Industrial Cements, 23 ; "Fairprene" P.A.W. Tape, 23 Industrial Floor, 43 Methacrylate Clear, 31 Penetrating Wood, 43 Railway, 32 Refrigerator, 29, 32 ' DUP210010914 PRODUCTS Finishes (continued) "Rubbertone", 29 Sign, 32 Soil Retardant, 44 "Teflon" 32 Textile Floor, 44 Tin Decorating, 32 Washing Machine, 33 Fire Extinguishing Agent (.See "Freon" FE130i), 79 Fishing Line (See "Stren"), 94 Flame Retardants Ammonium Sulfamate, 49 Ammonium Sulfate, 49 "CM", 50 CZC Chromated Zinc Chloride, 50 "X-12", 58 ' Flexible Shaft Grinders, 100 "Flintfiex" Enamels, 31 Floral Dust, 63 "Flow Kote" Rubber Base Wall Paint, 41 Fluorescent Chemicals (See Luminescent Chemical Products), 90 Fluorinated Hydrocarbons (See "Freon" Propellents, Refrigerants, etc.), 79, 80 Fluoroalcohols, 75 Fluorocarbons, 75 Fluoroelastomers (See "Viton"), 5 "Fluoro-Film" X-ray Films, 85 Flouroscopic Screens, 86 Fluxes Ceramic, 7 Galvanizing (See Zinc Ammonium Chloride and Ammonium Chloride), 51 Sodium Silicofluoride, 57 Soldering, 51 Tinning, 51 Foam Cleaner, 35 Foam Resin (See "Dulux" Foam Resin), 25 Force-Dry and Anti-Wrinkle Agent, 28 Formaldehyde, 51 Formamide, 52 Formanilide Tech., 75 Formaniline Tech., 75 o-Formotoluidide Tech., 75 Fornivar Wire Enamels, 31 "Freon" Propellents, Refrigerants, Solvents, etc., 79, 80 Fritted Trace Elements (See Ferro FTE), 64 Fruit Tree Spray, 64 Fuel Additive (Marine), 37 Fuel Oil Additives, 81, 82 Fumigants (See also Disinfectants) Formaldehyde Solution, 51 Methyl Formate, 54 Fumigants (continued) Paraformaldehyde, 55 Sodium Cyanide, 12 Soil, 51 Fungicides (See also Insecticides, Seed Disinfectants, etc.) Agricultural, 60, 61, 62 Industrial "Lignasan", 53 Paraformaldehyde, 55 "Shirlan", 70 Furan (Furfurane), 10 G Salt Tech., 75 "G-942" Tanning Agent, 52 "Game.master" Rifle, 96 Gamma Acid Tech., 75 Garden Products, 63, 64, 65 Gas Guard, 35 Gasoline Antioxidants, 82 Gasoline Colors, 82 Gasoline Trowels, 100 "G.B.S." (See Sodium Bisulfate), 56 Gel (See "Tovex" Gel), 18 "Gelex" Dynamites, 16 "Gelobel" Permissible Explosives, 16 Germicides (See also Disinfectants, Fumigants) Copper Sulfate, 50 Paraformaldehyde, 55 Glass Enamels, 6 Glass Fabrics, Tapes and Laminates, Coated (See "Armalon", "Lecton"), 23 Glaze Stains, 7 "Glow" Car Wash, 35 Gold, Gold Colors, Gold Powders, 6, 7, 8 Graphic Arts Film and Paper, 87, 88 Grease Stabilizer (See "Ortholeum" 300), 82 Grinders, (Air and Flexible Shaft), 100 H H Acid Tech., 75 Halogen Tin Plating, 9 Halogenated Hydrocarbons (See Chlorine Products), 8 (See also "Freon"), 79, 80 "Halopont" Pigment Colors, 66 Hand Brushes (See Toiletries), 95 Hand Cleaner, 35 Hand Protective Cream (See "Pro-Tek"), 35 Heat Transfer Media Anisole, 49 "Freon-114", 80 123 DUP210010915 PRODUCTS Heat Transfer Media (continued) "Hitec", 19 Methylene Chloride, 8 Perchlorethylene, 8 Sodium, 12 Sodium Nitrate, 56 Trichlorethylene, 8 Heavy Duty Stop Leak, 35 "Heliozone" Inhibitor, 4 "Hexalin" Cyclohexanol, 52 Hexamethylenetetramine, 52 "Hi-Cap" Dynamite, 16 "High Speed" Tinning Flux, 51 "High Velocity" Buckshot Loads, Cartridges, etc., 101 "Highway Patrol" Cartridges, 102 "Hi-Speed" Cartridges, 97 "Hitec" Heat Transfer Salt, 1 9 "Hi-Velocity" Gelatins, 16 "Hi-Way Master" Cartridges, 98 Homophthalic Acid Tech., 75 Hot Melt Bookbinding Adhesives, 30 "Hydan" Feed Supplement, 63 "Hydraphtal" Textile Processing Agent, 69 Hydrogen Peroxides, 10, 11 Hydrosulfite Concentrated, 67 Hydroxides -- Ammonium, 42, 72 -- Sodium, 56 l-Hydroxy-4-(a!pha-hydroxy-m-toluidino) anthraquinone Tech., 75 N-(7-Hydroxy-l-naphthyl)acetamide Tech., 76 I-Hydroxy-4-p-toluidinoanthraquinone Tech., 76 "Hylene" Organic Isocyanates, 3, 4 "Hypalon" Synthetic Rubber, 4 Hyperpure Silicon, 92 "Hytrol" Cyclohexanone, 53 I I.M.R. (See Improved Military Rifle Powders), 21 1, l'Tminobis(4-aminoanthraquinone) Tech., 76 l,L-Iminobis(4-benzamidoanthraquinone) Tech., 76 l,l'-Iminobis(5-benzamidoanthraquinone) Tech., 76 l,l'-Iminobis(4-nitroanthraquinone) Tech., 76 l,l'-Iminodianthraquinone Tech., 76 Impact Wrenches, 100 "Impedex" Sodium Propionate, 63 Inhibitors Acid and Rust, 34 Copper Inhibitor, 4 Copper (Petroleum) (See Metal Deactivators), 82 Corrosion (See Sodium MBT 50% Solution), 71 Gasoline, Grease, Oil Antioxidants, 82 Inhibitors (continued) Mold and Rope (See "Mycoban"), 54 Rust, 34 ' Sun-Checking (See "Heliozone"), 4 Sun Exposure Cracking (See NBC), 4 Insecticides (See also Fungicides), 60 Insect Repellents, 64 Insulation, Electrical Enamels for, 33 Material for (See "Armalon" and "Lecton"), 23 Intensifying Screens, 86 Intermediates (See Individual Chemicals, Alphabetical) 1,3-IsoquinoIinediol Tech., 76 Isoviolanthrone Tech., 76 J I Acid Tech., 76 J Acid Urea Tech., 76 "Jet Gene" Upholstery Cleaner, 35 Jet Perforators, 19 Jet Tappers, 15 K "Karmex" Herbicides, 61 "Kleanbore" Priming, 102 "Kleanrol" Soldering Flux (See Flux, Soldering), 51 "Kloben" Weed Killer. 61 Koch Acid Tech., 76 "Krumble Ball" Cartridges, 102 L "La Belle" Combs, 95 Laboratory Reagents, C.P. Acetic Acid, 48 Ammonium Hydroxide, 49 Hydrochloric Acid, 52 Nitric Acid, 54 Sulfuric Acid, 20, 51, 55, 57 Lacquers (See also Enamels, Paints and Varnishes) Acrylic (See "Lucite"), 25, 28 Airplane Finishes, 30 Bronzing Liquid, 30 Clear Gloss, 28 Clear Metal, 28 Dip, 26 "Duco" Furniture Lacquer, 31 "Duco" Lacquers, Automotive, 25, 28 "Duco" Lacquer Enamels, 28 "Duco" Lacquers, Metalli-Chrome, 25 "Duco" Lacquer Thinners, 26 "Duco" Striping Lacquers, 25 Foil, 31 Furniture, 28 Gloss, 32 DUP210010916 PRODUCTS Lacquers (continued) "Lucite", 25 Metal, 24, 25, 31 Paper, 32 Wood, 24 Laminates (See "Armalon", "Lecton"), 23 "Latyl" Carrier A and Dyes, 66, 67 urent's Acid ' 76 Lead Arsenate Insecticide, 60 Lead Azide, 19 Leather Processing Agents (See also Dyes and Pigments) "Alkanol" B Surface Active Agent, 67, 68 Aluminum Ammonium Sulfate, 49 Aluminum Potassium Sulfate, 49 Aluminum Sulfate, 49 Ammonium Chloride, 49 Ammonium Hydroxide, 49 "Avitone" Softener, 69 "D.uponol" Surface Active Agents, 68, 69 "Elvacet" Polyvinyl Acetate Emulsion, 12 Formaldehyde Solution, 51 Formic Acid--Tech., 52 "G-942" Tanning Agent, 52 "Hydraphtal" Textile Processing Agent, 69 Hydrochloric Acid--Tech., 52 Hydroxyacetic Acid--Tech., 52 Lactic Acid--Tech., 53 "Lucite" Acrylic Resin, 6 "Merpentine" Surface Active Agent, 69 "Merpol". C Textile Processing Agent, 69 "Methacrol" Resin Dispersion, 69 Methacrylate Polymers (See "Lucite"), 6 "Neomerpin" N Surface Active Agent, 70 Pigments, 91, 92 Sodium Salts, 55, 56, 57 Sulfamic Acid--Tech., 57 "Lecton" Acrylic Resin Coated Fabrics and Laminates, 23 "Lecton" Acrylic Resin Wire Enamels, 31 "Leucosol" Dyes, 66 "Lido" Combs, 85 "Lignasan" Fungicide, 53, 60 Liquid Bright Golds, 7 Liquid Bright Palladiums, 7 "Litho" Photographic Paper, 88 "Lithosol" Acids, Bases and Dyes, 66 "Lorol" Fatty Alcohols, 53 Lube Oil Additives and Assistants, 82 Lubricants "Avitex" Antistatic Developer, 69 "Avitex" Softener, 69 "Avitone" Softener, 69 ELA Elastomer Lubricating Agent, 4 "Lorol" 28 Normal Stearyl Alcohol, 53 "Methacrol" Lubricant, 69 Mold (See "Aquarex"), 2 Lubricants (continued) "Orel" Rubber Lubricant, 35 "Slipspray" Dry Lubricant, 35, 37 Spinning, 70 Water Pump (See Anti-Rust and Water Pump, etc.), 34 "Lucite" Acrylic Lacquers, 25, 28 "Lucite" Acrylic Resins, (Methacrylate Polymers), 6, (Molding Powders), 93 "Lucite" Solvent, 26 "Lucite" Thinner, 26 "Ludox" Colloidal Silica--Tech., 53, 54 Luminescent Chemical Products, 90 "Lump Coal" Permissible Explosives, 16 "Lusane" Dyes, 66 Luster Colors, 7 "Luxol" Dyes, 66 "Lycra" Spandex Fiber, 104 AS "Manzate" Maneb Fungicide, 60, 64 Marine Fuel Additive, 37 Marine Oil Additive, 37 "Marlate" Methoxychlor Insecticide, 60 Masking Compound, 28 "Matchmaster" Model 51 3T Rifle, 97 MBT (2-Mercaptobenzothiazole), 1,71 MBTS (Benzothiazolyl Disulfide), 1 "Melsan" Fungicide, 60 "Merpentine" Surface Active Agent, 69 "Merpol" Surface Active Agent, 69 Metal Conditioner, 29 Metal Deactivators, 82 Metal Descaling and Pickling "Duclean" Acids, 51 "Freon" Solvents, 80 Hydrochloric Acid--Tech., 52 Nitric Acid--Tech., 54 Sodium, for Sodium Hydride Descaling Process, 12 Sulfamic Acid, 57 Sulfuric Acid--Tech., 57 Metal Polish, 34, 37 Metal Suppressor, 82 "Methacrol" Lubricants, etc., 69, 70, 71 Methacrylates (monomers), 6, ("Monocite"), 94 ("Lucite" [polymersl), 6, 93, 94 Methacrylato Chromic Chloride (See "Volan"), 58 Methanol, 54, (Anti-Freeze), 59 Methanol Formaldehyde, 54 Methionine and Hydroxyanalogue (See "Hydan"), 63 1-Methoxyanthraquinone Tech., 76 125 DUP210010917 PRODUCTS Methoxychlor Insecticides, 60, 64 l-Methoxy-4-nitroanthraquinone Tech., 76 Methyl Chloride (See also "Artie"), 8 Methyl Formate--Tech., 54 1-Methylaminoanthraquinone Tech., 76 N-Methylaniline Tech., 76 3-(N-Methylanilino)propionitrile Tech., 76 1-(3-Methyl-2-anthraquinonylamino)-5-(7-oxo-7H- benz[de]anthracen-3-ylamino)anthraquinone Tech., 76 Methylating Agents Dimethyl Sulfate (Methyl Sulfate), 51 Methyl Chloride, 8 N-Methylcyclohexylamine Tech., 76 Methylenebis(2-chloroaniline), Tech., 76 p,p'-Methylenebis(N,N-dimethylaniline) Tech., 76 Methylene Chloride, 8 N-Methylglucamine Tech., 76 4-Methyl-2-nitroanisole Tech., 76 2- Methyl-1-nitroanthraquinone Tech., 76 "Mighty-Mite" Stud Driver, 98 Mild Detonating Fuse, 19 Mineral Adhesive Solution, 54 Mixed Acid, Technical (Nitrating Acid), 19 M.O.A. Motor Oil Additive, 35 "Moca" Curing Agent, 4 Moisture Control, 36 Mold and Rope Inhibitors (See "Mycoban"), 54 Mold Lubricants, Release Agents, etc., 2, 3 "Monastral" Pigments, 66, 92 "Monobel" Permissible Explosives, 16 "Monocite" Methacrylate Monomer, 94 Monomethylamine, 63 Monopersulfate Compound (See "Oxone"), 11 Mordants, Textile Ferrous Sulfate--Tech., 51 Lactic Acid--Tech., 53 Motion Picture Films, 84, 85 Motor Mix (See Tetraethyl Lead Compound), 83 Motor Oil Additive, 35 "Mycoban" Calcium and Sodium Propionate, 54 "Mylar" Polyester Film, 46 NA-22(Mercaptoimidazoline), Nail Brushes, 85 "Nalan" Water Repellent, 70 2,7-Naphthalene disulfonic acid disodium salt Tech., 76 "Naphthanil" Bases and Azoic Compounds, 67 "Naphthanil" Diazo Pigments, 91 "Naphthanil" Dye Bases, 67 o-Naphthionic acid Tech., 76 alpha-Naphthol Tech., 76 Naphthostyril Tech., 76 alpha-Naphthylamine Tech., 76 (2-Naphthylmercapto)acetic acid Tech., 76 NBC Sun Cracking Inhibitor, 4 "Neomerpin" N Surface Active Agent, 70 Neoprene Accelerator (See "Permalux"), 2 Neoprene Latices, 4 Neoprene, Various Types, 4, 5 "Neozone" Rubber Antioxidants, 2 Nevile & Winther's Acid Tech., 76 New Car Wax, 35 "NFL" Wood Stains, 32 "Nilite" Blasting Agents, 17 NI Seed Disinfectant (See "Ceresan"), 62 "Niox" Ammonium Nitrate (See Ammonium Nitrate), 19 Niter Cake (See Sodium Bisulfate), 56 "Nitramex" Blasting Agent, 17 "Nitramite" Nitro Carbo Nitrate, 17 "Nitramon" Blasting Agents, 17 2- Nitro-p-acetanisidide Tech., 76 3- Nitro-4-aminoanisole Tech., 76 5-Nitro-2-aminoanisole Tech., 76 4- Nitro-2-aminophenol Tech., 76 4-Nitro-2-aminotoluenc Tech., 76 5- Nitro-2-aminotoluene Tech., 76 m-Nitroaniline Tech., 76 4- Nitroaniline-2-sulfonic acid Tech., 76 0- Nitroanisole Tech., 76 p-Nitroanisole Tech., 76 1- Nitro-2-anthraquinonecarboxylic acid Tech., 76 m-Nitrobenzaldehyde Tech., 76 6- (p-(p-Nitrobenzamido)benzamido)-l-naphthol-3- sulfonic acid Tech., 76 6-(p-Nitrobenzamido)-l-naphthol-3-sulfonic acid Tech., 76 Nitrobenzene, 19 5- Nitro-2(3H)-benzimidazolone Tech., 76 p-Nitrobenzoic acid Tech., 76 4'-Nitro-4-biphenylcarboxylic acid, sodium salt Tech., 76 Nitro Carbo Nitrates, 17 Nitrocellulose--Soluble Types, 19 o-Nitrochlorobenzene Tech., 76 p-Nitrochlorobenzene Tech., 76 2- Nitro-p-cresol Tech., 76 m-Nitroformanilide Tech., 76 Nitroglycerin, 19 alpha-Nitronaphthalene Tech., 76 DUP210010918 PRODUCTS 7(and 8)-Nitronaphth(l,2)-oxadiazole-5-sulfonic acid Tech., 77 p-Nitrooxanilic acid Tech., 77 p-Nitrophenetole Tech., 77 0- Nitrophenol Tech., 77 p-Nitrophenol Tech., 77 4-Nitro-o-phenylenediamine Tech., 77 1- (m-nitropheriyi)-3-meihyI-5-pyrazolouc Tech., 77 l-(m-nitrophenyl)-5-oxo-2-pyrazoline-3-carboxylic acid Tech., 77 4-Nitrophthalimide Tech., 77 "Nitrosan" Blowing Agent, 20 p-Nitrosodium phenolate Tech., 77 p-Nitrosophenol Tech., 77 m-Nitrotoluene Tech., 77 o-Nitrotoluene Tech., 77 p-Nitrotoluene Tech., 77 Nitrotoluenes Mixed o-m-p Tech., 77 4-Nitrotoluene-2-sulfonic acid Tech., 77 "Nogas" Metal Pickling Agent, 54 "NuGreen" Fertilizer Compounds, 63 "NuRexform" Standard Lead Arsenate, 60 Nut Setters (Air), 100 Nylon Bristle, Plastics, Resins, etc., 93-95 Fiber, 104 Monofilaments (See also "Stren"), 94 Wire Enamel (See Wire Enamels, 33 "Ocenol" Oleyl Alcohol, 71 Octyl Alcohol (See "Lord" 20), 53 Oil Additives, 81 Oil Colors Gasoline Colors, 82 Oil Colors, 67 "Oil-Tight" Cartridges, 102 Oleum (Fuming Sulfuric Acid), 55 Oleyl Alcohol (See "Ocenol"), 71 "Ondal" Oxidizing Agent, 70 "Ondelette" Rayon Fiber, 104 "Orel" Rubber Lubricant, 35 Organic Isocyanates (See "Hylene"), 3, 4 "Orion" Acrylic Fibers, 104 "Ortholeum" Lubricant Assistant, 82 "Ortholeum" Grease Stabilizer, 82 "Ovalite" Enamel Undercoat (See "Dulux" "Ovalite"), 41 Overglaze Colors, 6 N-Oxalyl-m-phenylenediamine Tech., 77 N-Oxalyl-p-phenylenediamine Tech., 77 Oxidizing Agents (See also Bleaching Agents) "Albone", 10, 11 Calcium Peroxide, 10 Hydrogen Peroxide, 10, I 1 "Ondal", 70 "Oxone", 11 "Perdox", 1 1 "Sitol", 70 Sodium Bichromate, 56 Sodium Nitrate, 56 Sodium Peroxide (See "Solozone"), I 1 Zinc Peroxide, 11 6-Oxo-6H-anthr(9,1 )isothiazole-3-carboxylic acid Tech., 77 l-(7-Oxo-7H-benz(de)anthracen-3-ylamino) anthraquinone Tech., 77 1 ,T-(7-Oxo-7H-benz(de)anthracen-3,9-ylenediimino) dianthraquinone Tech., 77 "Oxone" Monopersulfate Compound, 1 1 Packaging, Materials for (See also Adhesives) Acetate Film, 45 "Alathon", 93 Cellophane, 45 "Cel-O-Seal", 48 "Mylar", 46 "Wind-O-Band", 48 Paint Remover, 29 Paints (See also Enamels, Lacquers, and Varnishes) Acid and Fume Resistant, 30, 39, 42 Aluminum, 28, 30, 39 Basement, 41 Barn and Roof, 41 Chemical Resistant, 39 "Dulux" Enamel and Paint Type Pigmented Finishes, 31 Fume Resistant, 39, 42 "Dulux" Marine, 42 "Dulux" Metal Protective, 43 "Dulux" Stucco, Shake and Shingle, 42 "Dulux" Tank, 43 "Dulux" Trim and Shutter, 42 Flat Wall, Fire Retardant, 41 "Flow-Kote" Rubber Base, 41 "Lucite" Acrylic House, 42 "40", 41, 42, House, 42 Heat Resistant Stack, 43 Professional, 43 Remover, 29, 44 Sign Finishes, 32 "Speed-Easy" Flat Wall, 41 Stippling, 41 Traffic, 43 Undercoats, 41 Vinyl Masonry, 42 White Lead House, 42 Palladiums, 7 127 DUP210010919 PRODUCTS Paper, Adhesives for, 48, 57 Coatings for "Alathon", 93 "Elvacet", 12 "Elvanol", 13 "Ludox", 53 "Quilon", 55 Dyes for "Halopont", 66 "Monastral", 66, 92 Paper Whites, 67 "Ponsol", 67 "Rotalin", 67 Flame Retardants for, (See "CM" and "X-12"), 50, 58 Lacquers, 32 Photographic, 88, 89 Sizes Aluminum Sulfate, 49 "Elvanol", 13 "Quilon", 55 Treating Agents Urea, 58 Whites, 67 "Paramount" and "Park Avenue" Toothbrushes, 95 Paraformaldehyde, 55 "Parzate" Fungicides, 60 Pentachlorobenzenethiol Tech., 77 Peptizers Neoprene (See "552"), 1 Rubber, 3 "Perclene" Perchlorethylene, 8 "Perdox" Sodium Borate Perhydrate, 11 "Perone" Hydrogen Peroxide, 11 Perforators, Jet (See Jet Perforators), 19 Peri Acid Tech., 77 Perk Marine Oil Additive, 37 "Permalux" Neoprene Accelerator, 2 Peters Ammunition, 101, 102 PETN (See Pentaerythritc Tetranitrate), 19 Petroleum Dyes, 82 "Petrowet" Surface Active Agent, 68 p-Phenetidine Tech., 77 Phenothiazine, 55 m-Phenylenediamine Tech., 77 l,3-Phenylenediamine-4-sulfonic acid Tech., 77 N-Phenyl Gamma Acid Tech., 77 N-Phenylglycine, potassium (and sodium) salt Tech., 77 2,2/-Phenyliminodiethanol Tech., 77 N-Phenyl J Acid Tech., 77 l-Phenyl-3-methyl-5-pyrazolone Tech., 77 Phenyl-alpha-naphthylamine (See also phenyl-betanaphthylamine), 77, 82 128 N-Phenyl-alpha-naphthylamine Tech., 77 N-Phenyl-beta-naphthylamine Tech., 77 N-Phenyl Peri Acid Tech., 77 Phosphorescent Chemicals, 90 Photocopy Papers, 88 Photographic Chemicals (See Tested Chemical Preparations), 90 (See also X-ray Film Processing Chemicals), 86 Photographic Films (See Films), 84, 85, 88 Photographic Papers, 88, 89 Photographic Sponge, 90 Photopolymer Printing Plates ("Dycril"), 90 "Photo-Writ" Photocopy Paper, 88 Phthalimide Tech., 77 Picric acid NF, 77 Picric acid Tech., 77 Pigments (See also Colors, Dyes) "Auric", 91 Ceramic, 7 "Dalamar" Azo Yellow, 91 "Duol", 91 Enamel, 6 "Monastral", 92 "Naphthanil", 92 "Ramapo", 92 Special, For Plastics, Paper, Textiles, 7 Titanium, 92 "Watchung", 92 Piperidine Tech., 77 Plastic Coated Fabrics (See "Fabrilite", "Armalon" "Lecton"), 22, 23 Plasticizers Neoprene (See "552"), 1 Rubber, 3 Plastic Netting (See "Vexar"), 46 Plastics "Alathon", 93 "Butacite", 93 "Delrin", 93 "Lucite", 93, 94 Nylon "Tynex", 95 "Zytel", 95 "Rulan", 94 "Teflon", 76, 94 Plastics Intermediate (See "Freon"), 80 Platinums, 7 Polishes Boat, 36, 37 Chrome and Metal Polish, 34 "Duco" Polishing or Rubbing Compound, 25 "7" Polish, 35 "Polyac" Butyl Rubber Conditioner, 4 Polyester Fiber (See "Dacron"), 104 DUP210010920 Polyester Photographic Film and Film Base (See "Cronar"), 84-88 Polyethylene Film, 46 Polyester Film (See "Mylar"), 46 Polyethylene Resins (See "Alathon"), 93 Polysulfide, 9 Polyvinyl Acetate (See "Elvacet"), 12, 13 Polyvinyl Alcohol (See "Elvanol"), 13 Polyvinyl Butyral Resin (See "Butacite"), 93 "Ponsol" Dyes, 67 "Pontachrome" Dyes, 69 "Pontacyl" Dyes, 67 "Pontamine" Developers, Dyes, etc., 67 Porcelain for Aluminum, 7 Potassium -- Alum (See Aluminum Potassium Sulfate), 49 -- Copper Cyanide Double Salt, 9 -- Cyanide, 12 -- Metal, 12 -- Silicates, 55 -- Titanate, Fibrous, (See "Tipersul"), 92 Poultry Feed Ingredients (See "Flydan"), 63 Powders Aluminum (See also Aluminum Paste), 30 Black Sporting, 16 Blasting, 16 Loggers', 16 Pellet, 16 Rifle (See Smokeless Powders), 20 Shotgun (See Smokeless Powders), 20 Silver, 6 "Power Mate" Stud Driver Kit, 98 "Prep-Sol" Solvent, 29 Preservatives, Wood Chromated Zinc Chloride, 50 Zinc Chloride, 58 "Primacord" Detonating Fuse, Connectors, 15 Primers (for Finishes) (See also Primer-Surfacers) "Antoxide" Metal, 42 Automotive, 25, 29 Black Dipping, 25 Blister Resistant, 42 Clear Wood, 28 "Duco" Lacquer, 31 "Duco" (Various), 42 "Dulux" (Various), 42 Flash, 25 Industrial, 32 Masonry Block, 42 Metal, 25, 42 Non-Sanding, 29 One-Bake Type (See Flash Primer), 25 "Preparakote", 29 Sealer-Coater, 41 Spangled Galvanized, 29 Sub-Marine Metal, 42 PRODUCTS Primers (continued) 39 Wood Primer White, 42 Wood, 25 Zinc Chromate, 29, 42 Primer-Sealer, 41 (See also Make-Ready Lacquer Primer-Sealer), 29 Primer-Surfacers (See also Primers), 26, 32, 36 Priming, "Kleanbore", 97, 101, 102 Primuline Fusion Mass 220, 240, 279, Tech., 77 Print Film (See "Cronapaque"), 89 Printing Plate Products (See "Dycril"), 90 Product BCO, 70 Propellents Aerosol (See "Freon"), 79, 80 (Methyl and Methylene Chlorides), 8 "Pro-Tek" Protective Hand Cream, 35 Putties, 26, 29, 32 "PX" Book Cloth, 22 "Pyrocore" Igniter Cord, 20 Pyromellitic Acid; Dianhydride, 20 Pyroxylin Cements, 30 Pyroxylin Coated Materials, 22, 23 Pyroxylin Solutions, 32 "Qualex" Carboxymethylcellulose, 20 "Quilon" Chrome Complex, 55 Quinaldine Tech., 77 Quinizarin Tech., 77 2,4-Quinolinediol Tech., 77 Quinophthalone Tech., 77 2 R Acid Tech., 77 Radiator Cleaner (See Cooling System Cleanser, and etc.), 34, 35 Radiographic Products, 85, 86 "Ramapo" Pigments, 92 "Rangemaster" Rifle, 97 Rayon Fibers, 104 Reclaiming Chemical (See RR-10), 3 "Red Cross" Dynamites, 16 Refrigerants "Artie", 8 "Freon", 79, 80 Methylene Chloride, 8 Remington Firearms and Ammunition, 96-98 Remington Construction and Industrial Tools, 98-100 Resin Dispersions "Methacrol", 70, 71 "Teflon" (Aqueous Dispersion), 94 129 DUP210010921 F !! i PRODUCTS Resin Sheet Stocks ("Butacite"), 94 Resins (See also Plastics) "Alathon", 93 "Butacite", 93 "Delrin", 93 "Dulux" Foam Resin, 25 "Lucite", 93, 94 Polyester (See "Dulux" Foam Resin), 25 "Rulan". 94 "Teflon", 94 "Tynex", 95 "Zytel", 95 Resistor Compositions, 7 Retarder LAN Surface Active Agent, 70 Retarder Thinner for "Duco", "Lucite" Lacquers, 29 Retarder, W, 4 Retarders, 26, 29, 32 Rhoduline Acid Tech., 77 Rifles, 96 Riveting Irons; Tips, 20 Rivets (See Du Pont Aircraft, etc.), 20 "Rocket" Cartridges, 98 "Roracyl" Dyes, 67 Rose Insecticide, Fungicide, Spray-Duster, 64 "Rotalin" Dyes, 67 RPA Rubber Peptizing Agents, 3 RR-10 Reclaiming Chemical, 3 Rubber Coated Materials (See "Fairprene"), 23 Rubber Chemicals (See also Antioxidants, Accelerators, etc. and Colors) "Aquarex" Surface Active or Mold Release Agents, 3 Blowing Agents, 3 Copper Inhibitor, 4 ELA Elastomer Lubricating Agent, 4 "Endor" Peptizing Agent, 3 "Heliozone, 4 Latex Stabilizers, Mold Lubricants, 2, 3 "Ludox" Colloidal Silica, 53, 54 "Moca" Curing Agent, 4 NBC Sun Inhibitor, 4 Peptizing and Reclaiming Agents, 3 Retarder W, 4 Sodium Dimethyl Dithiocarbamate, 56 Special Purpose Chemical, 4 Rubber Dispersed Colors, 4 Rubber Dressing, 34, 35 Rubber Lubricant (See "Orel"), 35 Rubbers, Synthetic, 4, 5 "Rubbertone" Rubber Finish, 29 Rubbing Compounds Automotive Refinish, 29 "Duco" Polishing or Rubbing Compound, 25 "7" Rubbing Compound, 35 "Rug Anchor" Rug Underlay, 23 "Rulan" Flame-Retardant Plastic, 94 Rust Inhibitor (See Acid and Rust Inhibitor), 34 Rust Preventive, 82 Rutile (See "Ti-Cal", "Ti-Fure"), 92 S Safelight (See S-55X Safelight), 90 Sal Ammoniac (See Ammonium Chloride), 49 c,>u /-'ir,, ce uau v_^ajs.w} Saltpeter, Chile (See Sodium Nitrate), 56 Sanders, Polishers (Air), 100 Sarcosine Tech., 77 Scatter Loads (See "Shur Shot"), 97 "Scoremaster" Rifle, 96 Scratch Remover, Boat, 37 Screens, Radiographic, 86 Screwdrivers (Air), 100 Sealers All Purpose, 34, 36 Automotive Bleederseal Sealer for Bleeding Colors, 26, 29 Clear Windshield Sealer, 35 Clear Wood, 43 Cooling System, 34 Engenamel, 31 Furniture Lacquer, 31 Heavy Duty Sealer, 35 Make-Ready Lacquer Primer-Sealer, 29 Primer-Sealer, 41 Sealer-Coater, 41 Windshield (See Clear Windshield Sealer), 34 Wood Sealer, 24 Seals, "Wind-O-Band", 47 Seam Sealants (See "Fairprene"), 23 Seed Disinfectants (See "Arasan", "Ceresan", "Semesan"), 62 "Seismex" Dynamites, 17 "Seismogel" Gelatin, 17 "7" Polish, Rubbing Compound, etc., 35 "Sevron" Dyes, 67 Sheet Explosives, 20 Sheet Stocks "Butacite", 93 "Fairprene", 23 Shells, Industrial, 98 Shotgun, 97 "Shield" (Car Finish Protectant), 35 "Shirlan" Industrial Fungicide, 70 Shotguns, Remington, 96 "Shur Shot" Scatter Loads, Shotgun Shells, etc., 97 Silicon, Hyperpure, 92 Silver Coatings (See Conductive Silver Coatings), 6 Silver Powder, 7 "Sitol" Flakes, 70 DUP210010922 PRODUCTS Sizes Paper Auminum Sulfate, 49 Polyvinyl Alcohol (See "Elvanol"), 13 "Quilon", 55 Sodium CMC, 20 Textile "Lucite", 6 Polyvinyl Acetate (See "Elvacet"), 12 Polyvinyl Alcohol (See "Elvanol"), 13 Skeet Loads, Outfits, etc., 90 "Slipspray" Dry Lubricant, 35, 37 Slugs, Rifled, 97, 101 Snail and Slug Pellets, 65 Snug Water Repellent, 37 Soap, Boat, 36 Soap Boxes (See Toiletries), 95 Soda Ash (See Sodium Carbonate), 56 Sodium -- Acid Fluoride, 55 -- Alkyl Sulfonate (See "Aquarex"), 2 -- Bicarbonate, 55 -- Bichromate, 56 -- Bisulfate, 56 -- Bisulfite, 56 -- Borate Perhydrate (See "Perdox"), 11 -- Carbonate, 56 -- Carboxymethyl Cellulose (See Sodium CMC), 20 -- Copper Cyanide Double Salt, 10 -- Cyanide, 12 -- Dimethyl Dithiocarbamate, 56 -- Fluosilicate (See Sodium Silicofluoride), 57 -- Hydrosulfite (See Hydrosulfite Concentrated), 67 -- Hydroxide, 56 -- Hyposulfite (See Sodium Thiosulfate), 56 -- Lauryl Sulfate (See "Duponol"), 68 -- Mercaptobenzothiazole (See Sodium MBT), 71 -- Metal, 12 -- Metanilate--Tech., 77 -- Metasilicate, 56 -- Monoxide, 12 -- Naphthionate--Tech., 77 -- Nitrate, 56 -- Nitrite, 20 -- Perborate, 11 -- Peroxide, 11 -- Phosphates, 56, 57 -- Picramate--Tech., 77 -- Propionate (Jw.e "Mycoban", "Impedex"), 53, 63 -- Silicates, 56, 57 -- Silicofluoride, 57 -- Sulfate, Salt Cake, etc., 57 -- Sulfide, 57 -- Sulfite, 57 -- Sulfocyanate (See Sodium Sulfocyanide), 12 -- Sulfonate (See "Petrowet"), 68 -- Sulfuret (See Polysulfide), 9 -- Thiosulfate, 57 Soil Fumigant (See VPM), 61 "Solozone" Sodium Peroxide, 11 Soluble Plant Food, 64 Solvents (See also Thinners) Anisole, 49 Chloroform, 8 "Decalin", 71 Dimethyl Formamide (See DMF), 51 Dry Cleaning, 8, 35 Formamide, 52 "Freon" Solvents, 80 Gun, Equipment Cleaner, 29 "Hexalin", 52 "Hydraphtal", 69 "Hytrol", 53 Lacquer Removing Solvent, 29 "Lucite" Solvent (See Retarders), 26 "Merpentine", 69 "Merpol", 69 Methanol, 54 Methyl Chloride, 8 Methyl Formate, 54 Methylene Chloride, 8 Nitrobenzene, 19 Perchlorethylene, 8 "Prep-Sol", 29 Retarders, 26, 32 Tar Remover (See "Dissolvo"), 35 Tetrahydrofuran, 10 "Tetralin", 70 Thinners, 32 Trichlorethylene, 8 Sound Recording Films, 85 Spandex Fiber (See "Lycra"), 104 Spark Marine Fuel Additive, 37 "Spatter-Less" Cartridges, 97 "Speed-Easy" Paint, 41 "Speedmaster" Rifles, 97 Speedy Cleaner, 35 Sponges, Cellulose, 34, 36, 37 Sponge Cloth (Household, Marine), 36, 37 Sponge Yarn, 36 "Sportsmaster" Rifles, 96 "Sportsman" Shotguns, 96 Spot Remover, 35 Spray Glaze and Cleaner, 36 Sprayer, Garden Hose, 64 Spreader Loads (See "Victor"), 102 Spreader-Sticker, 63, 65 Squeegee Mediums, 7 Stains Body, 7 Furniture (See Furniture Finishes), 28 131 DUP210010923 PRODUCTS Stains (continued) Glaze, 7 Oil, Shingle, Varnish, 43 Pottery Body, 7 Wood (See Stains, Wood), 32 Stearyl Alcohol (See "Lorol" 28), 53 Stencil Paste, 32 Stop Leak (Heavy Duty), 35 "Stren" Monofilament Fishing Line, 94 "Stripkolex" Dynamite, 17 Strontium Nitrate, 57 Stud Drivers, Power Loads, Studs, etc., 98 Stunner, Humane, 98 Stunning Cartridges, 99 "Sulfanthrene" Dyes, 67 0-(p-Sulfobenzoyl)benzoic acid, disodium salt Tech., 77 1-(p-Sulfophenyl)-3-methyI-5-pyrazolone Tech., 77 l-(p-Sulfophenyl)-3-methy1-5-pyrazolone Tech., 77 "Sulfogene" Dyes, 67 "Sulforon" Wettable Sulfurs, 61 Sulfur Tetrafluoride Tech., 77 Sulfur, 57 Sulfur Trioxide, 57 "Super Cordura" Yam, 104 "Superior" Photographic Films, 84 Surface Active Agents (See also Text. Proc. Agents) "Alkanol", 67, 68 "Aquarex", 2 . "Avitex", 69 "Duponol", 68, 69, 70 "Elvanol", 13 "Merpentine", 69 "Merpol", 69 "Neomerpin", 70 "Petrowet", 68 Product BCO, 70 Retarder LAN, 70 "Zonyl", 68 Surfacers, 26, 32 Surplus Materials, 103 Synthetic Resin Coated Fabrics, Laminates and Felts, 23 Synthetic Rubbers, 4, 5 Tanning Agents (See Leather Processing Agents) Tapes "Armalon", "Fairprene", 23 Tar Remover (See "Dissolvo"), 35 "Target" Cartridges, 102 Target Loads, 102 Target Thrower, 98 "Targetmaster" Cartridges, 98 "Targetmaster" Rifle, 96 Targets, 98 "Teflon" FEP Fluorocarbon Film, 46 "Teflon" Fiber, 104 "Teflon" TFE-Fluorocarbon Resins, 94 "Teflon" Resin Finishes, 32 "Teflon" Wire Enamels, 33 "Telar" Anti-Freeze and Summer Coolant, 59 "Telvar" Weed Killers, 61 "Tepidone" Rubber Accelerator, 2 "Tersan" Fungicide, 62 Tetrabutyl titanate Tech., 78 1.4.5.8- Tetrachloroanthraquinone Tech., 78 Tetrachloroethane, 8 Tetraethyl Lead Compounds, 82, 83 Tetraethylthiuram Disulfide--Tech., 78 Tetrahydrofuran, 10 Tetraisopropyl titanate Tech., 78 1.4.5.8- Tetrakis(l-anthraquinonylamino)anthraquinone Tech., 78 Tetrakis(2-ethyhexyl) titanate Tech., 78 "Tetralin" Solvent, 70 Tetramethyl Lead Compounds, 83 "Tetramix" Antiknock Compound, 83 Tetrastearyl titanate Tech., 78 "Tetrone" Rubber Accelerator, 2 Textile Fibers (See Staple Fibers, Yarns), 104 Textile Processing Agents (See also Bleaching Agents, Dyes and Dyeing Auxiliaries) "Albone", 10 "Alkanol", 67, 68 Ammonium Hydroxide--26, 49 "Aridex", 69 "Avitex", 69 "Avitone", 69 "CM", 50 "Decalin", 71 "Duponol", 68, 69, 70 "Elvacet", 12 "Elvanol", 13 Formic Acid, 52 . "Hexalin", 52 "Hydraphtal", 69 Hydrochloric Acid, 52 Lactic Acid, 53 "Lucite", 6 "Ludox", 53, 54 "Merpentine", 69 "Merpol", 69 "Methacrol", 69 "Neomerpin", 69 "Ondal", 70 DUP210010924 Textile Processing Agents (continued) Perchlorethylene, 8 Product BCO, 70 Retarder LAN, 70 "Shirlan", 70 "Sitol", 70 Sodium Bicarbonate, 55 Sodium CMC, 20 _ AiJUlUAlUV, Ju -- Perborate, 11 -- Peroxide, 11 -- Pyrophosphate, 56 ' -- Silicate Solution, 56, 57 -- Sulfate, 57 -- Sulfide, 57 -- Tripolyphosphate, 57 Spinning Lubricant L, 70 Sulfamic Acid, 57 Sulfuric Acid, 57 "Tetralin", 70 Trichlorethylene, 8 Urea, 58 "Zelan", 70 "Zelcon", 71 "Zelec", 70 "Zeset", 70 Textile Specialties, 68 Textile Yarns, 104 "Thermoflex" A Rubber Antioxidant, 2 Thinners Ceramic (See Mediums and Thinners), 7 "Dulux" (Various), 43 For Precious Metal Preparations, 7 Industrial, 32 Lacquer, 28 "Lucite" Thinner (See Retarders), 26 Retarder Thinner for "Duco", "Lucite", 29 Retarders, 32 Thinners (Automotive), 26 Thio-beta-naphthol Tech., 78 3,3'-Thiodi(7H-benz[de]anthracen-7-one) Tech., 78 Thiodipropionate Antioxidant, 58 "Thionex" Rubber Accelerator, 2 Thiuram Accelerators, 2 "Thunderbolt" Cartridges, 102 "Thylate" Fungicide, 61 "Ti-Cal" Pigment Rutile, 92 Tin Plating Process, 9 "Tipersul" Potassium Titanate, 92 "Ti-Pure" Titanium Dioxides, 92 Tire Black (See Liquid Tire Black), 35 Tire Cleaner, White Wall, 36 Titanium Metal, 92 Toiletries, 95 o-Tolidine base Tech., 78 PRODUCTS o-Tolidine hydrochloride Tech., 78 m-Toluidine Tech., 78 o-Toluidine Tech., 78 p-Toluidine Tech., 78 o-(p-Toluoyl)bcnzoic acid Tech., 78 2.4-Tolylenediamine Tech., 78 2.4-Tolylenediamine-5-sulfonic acid Tech., 78 Tomato Dust, 64 "Tontine" Vinyl Coated Fabrics, 22 "Tontine" Shade Cloth, 23 Tools, Industrial (See Remington Construction and Industrial Tools), 100,101; (Powder Actuated), 98 Toothbrush Holders, 95 Toothbrushes, 95 "Tovex" Gel, 18 "Town & Country" Flat White Enamel, 41 Trap Loads ("Victor"), 81 Tree Wound Dressing, 65 "Triclene" Trichlorethylene, 8 1,3,5-Triethylbenzene Tech., 78 Trimethylamine, 58 1.3.3-TrimethylA2,a-indoIineacetaldehyde Tech., 78 1.3.3-Trimethyl-2-methyleneindoline Tech., 78 Trinitrotoluene (TNT), 20 "Trysben" Weed Killer, 61 T.S.P. (See Sodium Phosphate)--Tri), 56 "Tufcote" Furniture Lacquer Sealers, etc., 31, 41 "Turtleback" Car Washing Sponge, 36 "Two-Sixty-Two" Feed Compound, 63 "Tynex" Nylon Filaments, 95 "Tyzor" Organic Titanates, 71 U UAL-B, etc. (See "Uramon"), 63 Undercoats (See also Primers, Sealers), 32, 41 Underglaze Pigments, 7 "Unicel" Blowing Agents, 3, 20 Universal Tinting Colors, 44 Upholstery Cleaner, Car (See "Jet Clene"), 35 "Uramite" Fertilizer Compound, 63 "Uramon" Ammonia Liquors, 63 Urea, 58 Urea Formaldehyde, 58 Urethane Rubber (See "Adiprene"), 4 Urotropine (See Hexamethylenetetramine), 52 Vapor Degreasing Compounds, 8 "Varigam" and "Varilour" Photographic Papers, 89 133 d DUP210010925 PRODUCTS Varnishes (See also Enamels, Lacquers and Paints) Aluminum Mixing Vehicles, 30 Chassis Blacks, 28 Clears, 32 Bronzing Liquid, 24 Implement Finishes, 31 Metal, 24 Super Clear Varnish, 43 Wood, 24 "Dulux" (Various), 43 Floor and Trim, 43 Furniture, Clear and Flat, 31 Industrial, 32, 43 Insulating, 31 Penetrating Wood Finish, 43 Remover, 44 Super Clear, 43 Textile Floor, 44 Tin Decorating Finishes, 32 Vegetable Garden Dust, 64 "Velour Black" Photographic Paper, 89 "Vexar" Plastic Netting, 46 Vibrators (Concrete), 100 "Victor" Shotgun Shells, Loads, etc., 101, 102 Vinyl Acetate, 13 Vinyl Coated Fabrics (See "Fabrilite", "Tontine"), 22, 23 Vinyl Drapery Material (See "Tontine"), 23 Vinyl Fluoride MS Tech., 78 Vinyl Materials (See "Fabrilite", "PX" Book Cloth), 22 Vinyl Resins (See "Elvax"), 13 Violanthrone Tech., 78 "Viton" Fluoroelastomers, 5 "Volan" Bonding Agent, 58 VPM Soil Fumigant, 61 "Vydax" Fluorocarbon Telomers, 71 W Warmtone Photographic Projection Paper, 89 "Watchung" Red Pigments, 92 Water Glass (See Sodium Silicate), 56, 57 Water Pump Lubricant, 34 Water Repellents "Aridex", 59 "Nalan", 58 "Quilon", 55 Snug (Canvas), 37 "Zelan", 70 Waterproof Cements, 30 Waxes, Auto, Boat, New Car, 34, 35, 37 Weed Killers (See also Brush Killers), 61, 65 Wetting Agents (See Surface Active Agents), 68, 69, 70 Whites (See "Pontamine" Whites), 67 "Wind-O-Band" Cellulose Seals (See also "Cel-O-Seal"). 47 Window Shade Material (See "Tontine"), 23 Windshield Washer Solvent, 36 "Wingmaster" Shotgun, 96 Wire Enamels, 32 "Wonder" Skeet Outfits, 98 Wood Alcohol (See Methanol), 54, 59 Wood Bleach (See "Dulite"), 37 Wood Fillers, 31 "Dulux" Paste Filler, 26 Paste Wood Filler, 44 Wood Preservatives, 58 Wood Primers, Sealers, Stains (See Primers, Sealers, Stains), 24, 25, 32 "Woodsmaster" Rifle, 96 X "X-12" Flame Retardant, 58 X-ray Film Processing Chemicals, 86 "Xtra-Fast" Film, Type 508, 85 2.4-Xylidine Tech., 78 2.5-Xylidine Tech., 78 Xylidines Mixed Tech., 78 Yarns Cellulose Sponge, 36 Textile, 104 Y Z "Zalba" Rubber Antioxidants, 2 "Zelan" Water Repellents, 70 "Zelcon" Fabric Conditioner, 71 "Zelec" Antistatic Agents, 70 "Zenite" Rubber Accelerators, 2 "Zepar" Reducing Agent, 71 "Zerex" Anti-Rust Anti-Freeze, 59 "Zerlate" Ziram Fungicide, 61 "Zerone" Anti-Rust Anti-Freeze, 59 "Zeset" Fabric Stabilizer, 70 Zinc Ammonium Chloride, 58 -- Chloride, 58 -- Cyanide, 10 -- Peroxide, 11 -- Plating Products, 10 "Zin-O-Lyte" Brightener, Salts, 9 "Zobar" Weed Killer, 61 "Zonyl" Fluoroalkyl Esters, 71; Surfactants, 68 "Zoron" Polymer Emulsion, etc., 71 "Zytel" Nylon Resins, 95 DUP210010926 DUP210010927 Du Pont Products--Classified by Industry h is s e c t io n provides the customer with a quick, handy Treference to the Du Pont products and developments that are currently available for his industry. A brief description or outline of uses is given in each case. Fur Common Industrial Chemicals .................. Alphabetical Section (individually) Ammonium Hydroxide, Nitric Acid, Hydro chloric Acid (Muriatic), Methyl Alcohol, Sul ther information, particularly for the newer chemicals, about special properties, possible applications, handling, etc., may be obtained by a call or letter to the nearest furic Acid, etc. yScc also afid 1 .........................6-67 office of the Department which manufactures or sells the Explosives ....................................................................... 14-18 specific product. Address and telephone numbers are listed in each Departmental Section (White pages) and in the Blue Section at the end of this book. Finishes ..............................................................................................122 Paints, Varnishes, Lacquers. Packaging and Industrial Films ............................................127 Du Pont products that can be classified in groups, e.g., bleaching agents, fungicides, heat transfer media, sol Acetate Film, Cellophane, "Cel-O-Seal" Cellu lose Bands, "Mylar" Polyester Film, etc. vents, textile processing agents, rubber chemicals and Plastics ..............................................................................................128 others have not been listed individually but referred to as A complete detailing of these uses would be a specific group in the Yellow Section, where the individ impossible but brief indications have been ual members may be located. For example, under the given (pp. 155-157). Questions on specific prob heading, Tanning Industry, on page 158 of the Pink Sec lems are welcomed by the Polychemicals Dept. tion, the reference "Leather Processing Agents" . . . p. 125 is given, rather than a list of each of the many items that belong to that group. Propellents ....................................................................................... 129 The use of propellents is constantly expanding. Questions on specific problems may be sent to A number of Du Pont products are used in nearly all industries so that there appears to be no advantage in listing these "general use" items for each industry. Refer the appropriate manufacturing departments. Reagents (CP) ................................................ Alphabetical Section (individually) ences to these are as follows: Refrigerants ..................................................................................... 129 The Major Industries The classification used in this section is adapted from the Standard Industrial Classifica tion Manual of the United States Bureau of the Budget, and the various systems used over the years in the Industrial Departments of the DuPont Company. In a sense it represents a compromise that for the purposes of this work appears to be the one most useful to Du Pont customers. Agriculture ....................................................................................... 139 Automotive and Aviation industries....................................... 139 Chemical Industry .........................................................................141 Construction Industry .................................................................. 144 Electrical and Electronic Industries ......................................... 144 Explosives and Pyrotechnics Industries .................................145 Fabricated Metal Products Industry....................................... 146 Food Industry .................................................................................147 Forest Products Industry ............................................................148 Textile Industry ................... . 138 Graphic Arts Industry ................................................................ 149 Non-metallic Mineral Products Industries .......................... 150 Paint, Pigment and Varnish Industries ................................ 150 Petroleum Industry ...................................................................... 151 Public and Private Utilities and Institutions .....................152 Pulp, Paper and Paper Products Industries ...................... 153 Rubber and Plastics Industries ............................................... 155 Soaps, Detergents and Allied Products Industries ..........157 Tanning Industry .......................................................................... 158 .............................................. 158 DUP210010928 INDUSTRIES SECTION Agriculture Brush Killers ......................................................................... 61, 65 Yard, pasture and field maintenance. Fertilizers ................................................................................... 63 Formaldehyde ........................................................................... 51 Treatment of soil and seed; fungicide; bactericide; deo dorant; disinfectant; fertilizer component. "Freon"..................... . Propellents for aerosol products. 19, 80 Fungicides ...................................................................... 50,60,64 Specific control of diseases of vegetables, fruits, orna mentals, etc. Garden Products ....................................................................... 63 Pest control chemicals and weed killers for home gardens. Hexamethylenetetramine ....................................................... 52 Treatment of citrus fruit to control spoilage in storage. "Hydan" ..................................................................................... 63 Methionine (essential amino acid) source for poultry, dog and livestock feeds. "Hytrol" O .................................................................................. 53 Insecticides. "Impedex" ................................................................................. 63 Heat and mold inhibitor. insecticides ................................................................................. 65 Specific control of insects attacking fruits, vegetables, live stock, etc. Intermediates for Agricultural Chemicals (See Agricultural Chemicals} ...................................................115 Methylene Chloride ................................................................. 8 Solvent for active ingredients of aerosol mixtures. "Mylar" ..................................................................................... 46 Glazing material for greenhouses, other low cost farm construction. "NuGreen" ............................................................................... 63 Nitrogen fertilizer forsoil andspray application toplants. "NuGreen" LB ......................................................................... 63 Nitrogen fertilizer for spray application to plants. Paraformaldehyde ................................................................... 55 Fumigation for control of bacteria and fungi. Polyethylene Film ...................................................................... 46 Temporary glazingand silos;irrigation ditchand pond liners. Seed Disinfectants .................................................................... 62 Treating seed grains, forage, vegetable crop seeds, etc. Sodium Cyanide ........................................................................ 12 Fumigation. Trichlorethylene ........................................................................ 8 Solvent for insecticides; grain fumigant. Turf Fungicides .......................................................................... 62 Control of diseases in turf. "Two-Sixty-Two" ...................................................................... 63 Ingredients of feeds for ruminants. "llromite" ................................................................................... 63 Nitrogen fertilizer for direct soilapplication,for turf grass and ornamentals. "Uramite" M .............................................................................. 63 Ingredient for mixed fertilizer. "Uramon" Liquors .................................................................... 63 Nitrogen-containing ammoniating solutions for use in fer tilizer manufacture. "Vexar" Plastic Netting .......................................................... 46 Decorative garden fencing. Weed Killers .........................................................................61,65 Selective and non-selective control of weeds. Auto motive cmdl Aviution industries Acid and Rust Inhibitor............................................................ 34 Helps prevent acid and rust formation in automotive cool ing systems. "Alathon" .................................................................................... 93 Wire insulation; spring liners. All Purpose Sealer .................................................................... 34 Sealing glass, metal and cement. Anti-Rust and Water Pump Lubricant ................................ 34 Lubricates and helps prevent rust in auto cooling systems. "Armalon" Fabrics, Tapes, Laminates ................................ 23 Electrical insulation. "Armalon" Coated Glass Fabrics....................................... 23 Gaskets; diaphragms; wire wrapping; ducting; bearing seals; protective covers. Auto Wax .................................................................................... 34 Paste wax for auto finishes. Automotive Finishes .................................................................. 24 Lacquers; primers; enamels; etc. Automotive Refinishing Materials.......................................... 27 Lacquers; primers; enamels; etc. Brake Fluid--Heavy Duty ...................................................... 34 For automotive hydraulic brake systems. Bug Remover .............................................................................. 34 Cleaning powder for removing bug residues from car fin ishes, chromium, windshields and headlights. "Butacite" .................................................................................. 93 Safety glass interlayer. Car Soap .................................................................................... 34 Car Wash .................................................................................... 34 Washing auto finishes. Cellulose Sponge .................................................................36,37 Washing cars. Polishing chrome plated fittings, nickel, brass, copper and stainless steel. Chrome and Metal Polish ........................................................ 34 Cooling System Cleanser ........................................................ 34 Dissolving rust, scale and grease in radiators. Columbium .................................................................................. 92 Ductile metal of low thermal neutron cross-section. Base for high temperature alloys. Commercial Methanol Anti-Freeze ...................................... 59 Methanol base anti-freeze. Cooling System Sealer............................................. 35 Sealing leaks in automotive radiators and cooling systems. "Delrin" Resin ............................................................................ 93 Interior hardware; mechanical and electrical parts; bush ings and bearings for suspension and steering linkage, fuel pump and carburetor parts, gears and instrument clusters. 139 DUP210010929 fj f INDUSTRIES SECTION ill "Dissolvo" Remover ................................................................... 35 Liquid Tire Black .......................................................................... 35 Removing tar, road oil and gummy substances from auto Dressing tires, rubber mats and running boards. finishes. "Lucite" Lacquers ................................................................. 25, 28 DMF Antistall Additive.......................................................... 51,81 Painting or refinishing auto bodies and parts. Added to gasolines to prevent engine stalling during cool, humid weather. "Duco" Cement ........................................................................ 35 All purpose transparent flexible adhesive. "Duco" Lacquer ..........................................................25,28,31 "Lucite" Acrylic Resin (Methacrylate Polymers) ............... 6 Protective finishes applied by aerosols. "Lucite" Acrylic Resin (Molding Powders) ......................... 94 Automotive parking lamp and tail lamp lenses, instrument Painting or refinishing auto bodies and parts. "Dulux" Enamel ..................................................................25,28 Painting or refinishing auto bodies and parts. Metal Deactivators ....................................................................... 82 Improving storage stability of petroleum distillates. :: ifj .I Dyes ....................................................................................... 66, 67 Dyeing upholstery fabrics, headlinings, carpeting. Methylene Chloride ..................................................................... 8 Paint remover for continuous stripping of paints. Expansion Rivets ........................................................................ 20 "Mylar" Film .................................................................................. 46 A "blind" rivet for fastening automotive andaircraft Decorative laminates for car door paneling, etc., packag assemblies, partially or totally inaccessible from the oper ing parts. ating surfaces. Neopiene Rubber ....................................................................... 4, 5 "Fabrilite" Coated Fabrics .................................................... 22 For oil-, chemical-, heat- and oxidation-resistant flexible Upholstery; trim; bindings; welts; seat covers. parts. "Fairprene Cements.................................................................. 23 Weatherstripping; trim; seam sealants. "Fairprene" Tape...................................................................... 23 Seam sealant for oil-, air- and water-tightstructural joints. "Fairprene" Coated Fabrics ................................................ 23 Diaphragms; gaskets; washers; packings; seam sealants. "Fairprene" Sheet Stocks ...................................................... 23 Gaskets; washers; packings; seam sealants. Fast Flush .................................................................................... 35 Maintenance type liquid radiator cleaner. New Car Wax ................................................................................ 35 Combination paste wax and cleaner for use on new cars and excellent finishes. "Orel" Rubber Lubricant........................................................... 35 Lubricating rubber shackles and other rubber parts. "Ortholeum" Grease Stabilizer.............................................. 82 Stabilizer for greases. Perchlorethylene ............................................................................ 8 Vapor degreasing metal parts in manufacture or main tenance. Fibrous Potassium Titanate ("Tipersul") ............................ 92 Thermal insulator for temperatures to 2200" F. where lightweight, high-efficiency is needed. Foam Cleaner ............................................................................ 35 Cleaning upholstery. "Freon" Refrigerants .......................................................79, 80 For automotive airconditioning. "Freon" Solvents ...................................................................... 80 Fuel Oil Additives ...............................................................81, 82 Added to improve storage stability of petroleum distillates. Gas Guard.................................................................................. 35 Preventing ice formation in automotive gasoline lines. Gasoline Antioxidants ............................................................ 82 Reducing the formation of gum and precipitation of lead. Gasoline Colors.......................................................................... 82 Imparting characteristic colors to gasoline. Heavy Duty Stop-Leak.............................................................. 35 Repairing automotive cracked cylinders, engine blocks and water jackets. Phenyl-alpha and beta-Naphthylamines ........................... 82 Antioxidants for greases and lubricating oils. Plating Chemicals .........................................................................8,9 For brass, copper, cadmium, zinc and tin plating. "7" Polish ....................................................................................... 35 Cleaning and polishing auto finishes. "Pro-Tek" Hand Cream ........................................................... 35 Protecting hands and arms against grease, paint, etc. Rubber Dressing ............................................................................ 35 Dressing tires, rubber mats and running boards. Rust Preventive ......................................f..................................... 82 Added to petroleum distillates to reduce rusting and engine stalling. "7" Rubbing Compound............................................................. 35 Cleaning badly weathered auto finishes. Screen Process Film ..................................................................... 87 For producing photographic stencils for silk screen printing. "Shield" Finish Protectant ....................................................... 35 Hydrogen Peroxide .................................................................. 10 High strength peroxide used as a monopropellant and fuel oxidant. "Hypalon" Synthetic Rubber ................................................ 4 Base for weather and ozone resistant rubber parts. "Hytrol" ...................................................................................... 53 Lube oil additive. "Slipspray" Dry Lubricant ....................................................... 35 Speedy Cleaner ............................................................................ 35 Liquid cleaning of auto finishes. Spot Remover (Dry Clean) ......................................................... 35 Spray Glaze .................................................................................... 36 Polishing auto finishes. "Lecton" Coated Fabrics and Laminates .......................... 23 Electrical insulation. Spray Glaze Cleaner................................................................... 36 Cleaning auto finishes. Lino-Writ Recording Papers and Chemicals .................... 88 Oscillographic trace recording. Surface Active Agents ............................................................. 132 Cleaning; wetting; preparation for electroplating. DUP210010930 INDUSTRIES SECTION "Teflon" Film ............................................... 46 Wire and cable; printed circuitry; gaskets; seals; fuel cells; electrical and chemical parts. "Telar" Anti-Freeze ............................................................. 59 Tetraethyl Lead Compounds .............................................. 83 Aviation Mix; Motor Mix. Titanium Metal .................................................................... 92 Structural metal and alloy ingredients where lightness, strength and concision resistance are required. Trichlorethylene.................................................................... 8 Vapor degreasing metal parts in manufacture or mainte nance; thinning and continuous stripping of paints. Urea ...................................................................................... 58 De-icing airport ramps and walkways. "Vexar" ............................................................................... 46 Protective packaging for machine parts. "Viton" Fluoroelastomers ................................................. 5 For use in products that must withstand aromatic fuels, hydraulic fluids and oxidizing chemicals at very high tem peratures (500F.). Waterless Hand Cleaner ..................................................... 36 Removing dirt, grease, paints, oils, carbon, tar and shellac from skin. Weed and Brush Killers ..................................................... 61 Control of unwanted vegetation around airports. Whitewall Tire Cleaner ..................................................... 36 Safe, fast cleaner for whitewall tires. Windshield Washer ............................................................. 36 Detergent and anti-freeze for auto windshield washers. "Zerex"-................................................................................. 59 Ethylene glycol based anti-freeze. "Zerone" ............................................................................. 59 Methanol based anti-freeze. "Zytel" ................................................................................. 76 Mechanical and electrical parts; door lock mechanisms; dome light lenses; lubrication tubing. Chemical Industry Adipic Acid ........................................................................... 48 Ester plasticizers, alkyd resins and organic syntheses. Aluminum Ammonium Sulfate--N.F................................... 49 In the manufacture of pharmaceutical and styptic products. Aluminum Ammonium Suifate--Technical ...................... 49 Color lakes; imitation marble statuary. Aluminum Chloride ............................................................. 49 Color lakes; roofing granules. Aluminum Potassium Sulfate--N.F..................................... 49 In the manufacture of pharmaceuticals. Aluminum Potassium Sulfate--Technical.......................... 49 Photographic fixing and hardening chemicals. Aluminum Sulfate--Iron Free ............................................ 49 Sizing and coating paper; pigments; printing inks. Amine 248 ............................................................................ 49 Intermediate in water treatment andcorrosion inhibitor compounds. Ammonium Chloride ........................................................... 49 Compounded galvanizing and soldering fluxes; an ingredi ent in dry batteries. Ammonium Nitrate ............................................................... 20 Nitrous oxide; compounded salts for stripping copper from steel; oxidizing agent. Ammonium Sulfate ....................................................... 49, 63 Other ammonium salts; compounded fire retardants for textiles and wood; yeast food; ammonia-chlorine disinfec tion of water. Aniline ................................................................................... 20 Intermediates Anisole ................................................................................... 49 Solvent for organic reactions; intermediate; heat transfer medium. "Armalon" Fiber Felt........................................................... 24 Gaskets and filtering materials. "Armalon" Resin Coated Glass Fabrics............................ 24 Gaskets; diaphragms; wire wrapping; ducting; bearing seals; protective covers. Calcium Peroxide ................................................................. 10 Preparation of pharmaceuticals; cosmetics; general oxida tion. Chloroform ............................................................................ 8 Solvent for alkaloids, antibiotics, hormones, essential oils, and other organic compounds; dyes; fine chemicals; in manufacture of pharmaceuticals; freezing point depressant in carbon tetrachloride fluids. Chiorosulfonic Acid ............................................................. 50 Sulfonyl chlorides for syntheses of sulfa drugs and sac charin; sulfating and sulfonating organic compounds for dye intermediate and synthetic detergents; source of an hydrous hydrogen chloride. Copper Cyanide .................................................................. 9 Dyes. Copper Sulfate .................................................................... 50 Copper salts; pigments; fungicides; germicides; wood pre servative compositions; algaecide in water treatment. Copperas (Ferrous Sulfate] ................................................ 50 Iron salts; Prussian blue; iron oxide pigments; indigo dyes; clarifying agent in water purification and waste disposal; boiler compounds for removal of silica. "Decalin" Solvent ............................................................... 71 Solvent and intermediate. 1,4-Dichlorobufane ............................................................. 10 Organic syntheses requiring highly reactive chlorine atoms. Dichlorobutene ................................................ 50 Preparation of compounds in pharmaceutical, electroplat ing and chemical industries. Diethylamine ........................................................................ 50 Intermediate for pharmaceuticals, pesticides, rubber chemi cals and surface active agents. Diglycolic Acid...................................................................... 50 Organic syntheses; sequestering agent; resins, plasticizers. Dimethylacetamide............................................................... 51 Catalyst and solvent in pharmaceuticals, dyes and other organic chemicals manufacture. DMF--Dimethyl Formamide .............................................. 51 Solvent for vinyl resins in lacquers; films and printing inks, pigments, dyes and inorganic salts; reaction medium in the pharmaceutical, dye and synthetic organic chemicals in dustries; selective refining solvent for acetylene, acid gases and petroleum constituents. 141 DUP210010931 INDUSTRIES SECTION Dimethyl Sulfate .......................................................................... 51 Methylating agent in manufacture of dyes, synthetic drugs, and other organic compounds. Dimethyl Terephthalate ............................................................. 19 Intermediate for plasticizers and organic intermediates. Dimethylcmine ....................................................................................... 51 Intermediate for rubber accelerators and quaternary am monium compounds; in making pharmaceuticals, herbi cides, flotation agents, Bntioxidants, 3.t ><5 solvents, "Elvacet" ......................................................................................... 12 Paint vehicle; heat seal applications; adhesives; textile fin ishes; binders. "Elvanol" ........................................................................................ 13 Adhesives; temporary protective coating; emulsifying agents; emulsion stabilizer and thickener; textile size; ther mosetting resin modifier; synthesis of polyvinyl formal and polyvinyl butyral. "Elvax" ............................................................................................ 13 Wax additive; hot melt adhesives; textile finishing; mois ture vapor barrier coatings. Emulsifying Agents .......................................................................121 "Fairprene" Coated Fabrics.......... ......................................... 23 Diaphragms; gaskets; packings. "Fairprene" Sheet Stocks........................................................... 23 Tank linings; gaskets; packings. Formaldehyde--Low Methanol Grades................................ 51 Adhesives; plastics; sequestering agents; dyes; synthetic fiber and sponges; paper, rubber, agricultural, textile and photographic chemicals; explosives. Formaldehyde--U.S.P.................................................................... 51 Disinfectant, deodorant, preservative. Formamide--Technical ............................................................... 52 Solvent; softener; chemical intermediate. Formic Acid .................................................................................... 52 In manufacture of organic and inorganic formats, fat and oil hydrogenation catalysts, synthetic camphor, sol vents, perfumes, and pharmaceuticals. "Freon" Solvents .......................................................................... 80 Selective solvent in degreasing applications. "Freon-11" and "Freon-14" .................................................... 79 Heat transfer media. Furan ................................................................................................. 10 Intermediate. "G B S" Sodium Bisulfate ......................................................... 56 Sulfuric acid substitute; acid cleaning compounds. "Hexalin" ......................................................................................... 52 Cyclohexanone and various cyclohexyl esters; solvent for oils and waxes. Hexamethylenetetramine ........................................................... 52 Adhesives; plastics; in manufacture of pharmaceuticals; rubber; agricultural chemicals; explosives. Hydrofluoric Acid .......................................................................... 52 Fluorides; acid fluorides; flucsilicates; fluoborates; fermen tation control and disinfectant in brewing; disintegrating silicates. Hydrogen Cyanide.......................... 12 Sequestrants, pharmaceuticals, acrylic resins and fibers; hydantoins. Hydrogen Peroxide ..................................................................... 10 Epoxidation, oxidation, hydroxylation and syntheses of organic compounds; purification of metal salt solutions; in manufacture of pharmaceuticals and drugs; synthesis of alkaline earth peroxides; polymerization catalyst; manu facture of organic peroxides. Hydroxyacetic Acid ...................................................................... 52 Sequestering and neutralizing agent. "Hypalon" ...................................................................................... 4 Base for products that must withstand oxidizing chemicals and fluids. "Hyfrol" O ...................................................................................... 53 Organic syntheses. Intermediate Chemicals ......................... Alphabetical Section Organic syntheses, dye trade, general chemical manu facture. Lactic Acid ...................................................................................... 53 Lactates; organic solvents and esters; cosmetics; acidulant in compounded dyeing assistants. Lactic Acid--U.S.P.......................................................................... 53 In manufacture of pharmaceuticals. "Lecton" Coated Fabrics and Laminates ............................ 23 Electrical insulation. Lino-Writ Recording Papers ..................................................... 88 For mass spectrometry, oscillographic recording and other dynamic measurement use. "Lorol" ............................................................................................ 53 Intermediates in organic syntheses; detergents; oil addi tives; plasticizers. "Luaox" .................................................................................... 53, 54 For increasing hardness and slip resistance in emulsion floor waxes; inorganic binder for fiber glass and inorganic fibers; compounding polymer latex products to improve modulus and abrasion resistance; modifying latex adhe sives for improved bond strength; improved water and heat resistance of adhesive and fibrous structures; anti-soil treatment of carpets. Methacrylate Monomers .........................................................6, 94 Acrylic resins and copolymers; chemical intermediates. Methyl Chloride.............................................................................. 8 Methylating agent in organic syntheses; solvent in lowtemperature reactions. Methyl Formate.............................................................................. 54 Solvent; intermediate in organic syntheses and sulfa drugs. Methylamine .................................................................................. 54 Intermediate in synthesis of pharmaceuticals, dyes, surface active compounds, photographic developers and soil fumi gants. Methylene Chloride...................................................................... 8 Solvent for alkaloids and many heat-labile organic com pounds; low-temperature brine for making pharmaceuticals and fine chemicals. Mixed Acid...................................................................................... 19 Nitrocellulose; dyes; intermediates; and other organic nitro compounds. "Mylar" Film .................................................................................. 46 Laminated to aluminum foil or papers (kraft or asbestos) to form a moisture and chemical resistant construction for protecting thermal insulation and other equipment; used as a base for pressure sensitive tapes that resist chemical attack. DUP210010932 INDUSTRIES SECTION Neoprene ............................................................................. 4, 5 As a base for maintenance coatings base and other prod ucts that must withstand chemicals, oils, and heat. Nitroglycerin ........................................................................ 19 In manufacture of medicinals. "Ocenol" ............................................................................. 71 Intermediate for synthesis of detergents and emulsifying agents. "Oxone" ............................................................................... 11 For preparation of dentifrices, home laundry bleach, neu tralizer for hair waving compounds, stain remover for plastic ware. Paraformaldehyde ............................................................... 55 In manufacture of adhesives, plastics, pharmaceuticals, tex tile and photographic chemicals; disinfectant. Perchlorethylene .................................................................. 8 Solvent for rubber, waxes, tar, paraffin, gums; syntheses. "Perdox" Sodium Borate .................................................... 11 For preparation of dentifrices, home laundry bleach, neu tralizer for hair waving compounds, stain remover for plastic ware. Potassium ............................................................................. 12 Laboratory reagent. "Quilon" ............................................................................... 55 Coatings, adhesives. Pyromellitic Acid, Pyromellitic Dianhydride .................... 20 Intermediates for preparation of ester plasticizers, synthe tic lubricants and polymers. Sodium ................................................................................... 12 Indigo and dye intermediates; tetraethyl lead; sodium per oxide; sodium cyanide; syntheses; heat transfer medium. Sodium Bicarbonate--Technical ....................................... 55 Neutralizing agent in leather tanning, textile and paper in dustries; as an ingredient in fire extinguishing compounds. Sodium Bicarbonate--U.S.P................................................ 55 In manufacture of baking powder, pharmaceuticals, and food products. Sodium Bisulfite.................................................................... 56 Tanning extracts; dyes; intermediates; inorganic bisulfites and hydrosulfites; antiseptic and sterilizing in brewing proc esses; antichlor in bleaching and chlorinating. Sodium Carbonate ............................................................... 56 Sodium organic and inorganic salts; soaps; dyes; interme diates; neutralizing; hydrolyzing; saponifying; pH control; water softening; artificial zeolites; general industrial clean ing; compounded metal heat treating salts and fluxes; metal oxide catalysts. Sodium Carboxymethy! Cellulose ..................................... 20 Adhesives. Sodium Cyanide .................................................................. 12 Indigo; dye intermediates; pigments; case hardening and electroplating; syntheses; sequestering agents. Sodium Hydrosulfife............................................................. 67 Reducing and stripping agent for dyes; bleaching agent for paper, pulp, sugar, clay. Sodium Perborate--N.F....................................................... 11 In preparation of dentifrices and pharmaceuticals; poly merization; dry bleaching powders and cleansers. Sodium Peroxide .................................................................. 11 Inorganic and organic peroxides; general oxidizing agent. Sodium Phosphate--Di--Food Grade............................. 56 Boiler compounds; in making processed cheese; paper coatings. Sodium Pyrophosphate ...................................................... 56 Iron and other pyrophosphates; water softener; general dis persing agent. Sodium Silicate ...................... 56,57 Silica gel; artificial zeolites; adhesives; detergents. Sodium Silirnfliini'ide Aluminum melting fluxes. 57 Sodium Sulfate .................................................................... 57 Standardizing dyes; boiler feed water treatment; drying agent for acetone and other organic solvents; turkey red oil; compounded detergents. Sodium Sulfide...................................................................... 57 Sulfur dyes and intermediates; thioglycois; petroleum ad ditives; sulfur soaps; depilatories in tanning; precipitat ing heavy metals; photographic development and toning chemicals. Sodium Sulfite ...................................................................... 57 Dyes; intermediates; tanning extracts; antichlor following bleaching and chlorination; anti-fermentative, antiseptic, and sterilizing in brewing; deoxygenating boiler feed water; photographic developers. Sodium Thiosulfate............................................................... 57 Dyes; antichlor in bleaching and chlorinating; compounded photographic fixing chemicals. Solvents .................................................................................. 131 Strontium Nitrate ................................................................ 57 Pure strontium salts. Sulfamic Acid ........................-............................................ 57 Acid cleaning for removal of scale deposits from heat exchangers, condensers, compressor jackets, piping, etc.; nitrite removal in diazotization of dyes and pigments; cata lyst in resin polymerization; mild sulfating or sulfonating agent. Sulfur--N.F............................................................................. 57 In manufacture of pharmaceuticals. Sulfur--Technical ................................................................ 57 Thio and sulfide compounds; sulfuric acid; sulfur chlorides; sulfur dioxide; organic oxidation and chlorination catalysts. Sulfur Trioxide ...................................................................... 57 Sulfating and sulfonating agent for lube oil additives and other organics. Surface Active Agents......................................................... 132 Wetting; scouring; dispersing, emulsifying; detergent; sur face tension reducing. "Teflon" Film ........................................................................ 46 Gaskets and seals; chemical barriers. Terephtholic Acid ................................................................ 20 Intermediate in chemical syntheses. Tefrachloroethane ............................................................... 8 Syntheses; solvent. Tetrahydtofuran .................................................................. 10 Intermediate and solvent; adhesives for plastics and films; extraction in the manufacture of drugs and pharmaceuti cals; reaction medium. "Tetralin" ........................................ Solvent and intermediate. 71 143 in DUP210010933 INDUSTRIES SECTION Thiodipropionate Antioxidant................................................... 58 Antioxidant for fats and oils. Titanium Metal .............................................................................. 92 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Trichlorethylene .......................................... 8 Extraction of oils, fats and waxes;alkaloids; chemical syntheses; azeotropic dehydration of alcohols and other organic compounds; freezing point depressant in carbon tetrachloride fluids. Trimethylamine .......................................................................... 58 Intermediate for choline salts (animal feed supplement) and quaternary ammonium salts. Urea ................................................................................................... 58 Intermediate in the preparation of pharmaceuticals; resins for adhesives; finishes; flame retarding agents, paper and textile treating agents and molding powders. "Vexar"........ ..................................................................................... 46 Filter media support;drainage member inchemical proc ess filters. Vinyl Acetate .................................................................................. 13 In manufacture ofpolyvinyl acetate,polyvinyl alcohol, polyvinyl butyral, polyvinyl formal and vinyl chloridevinyl acetate copolymers. "Viton" Fluoroelastomers ......................................................... 5 Rubber base for flexible parts that must withstand chemi cals, oils and other liquids at exceptionally high tem peratures. Weed and Brush Killers ............................................................. 61 Control of unwanted vegetation. Wetting Agents ........................................................................ 67,68 Zinc Ammonium Chloride........................................................... 58 Soldering, tinning and galvanizing fluxes. Zinc Chloride .................................................................................. 58 Zinc salts and soaps; soldering, tinningand galvanizing fluxes; catalytic and dehydrating agents for dyes, interme diates, alcohol and other organic compounds; ingredient in dry batteries. Zinc Peroxide .................................................................................. 11 In the manufacture of deodorants, dustingpowder, oint ments, and foot powders. Construction industry "Adiprene" Urethane Rubber ................................................ 4 Caulks, paints, etc. "Alathon" Polyethylene Resin ................................................ 93 Waterproofing and damp-proofing film, pipe, wire and cable insulation; plumbing components. Moldable and mechani cal components. CZC, Chromated Zinc Chloride................................................ 50 Preservation of wood against decayand termite attack; flame retardance. "Delrin" Acetal Resin ................................................................. 93 Plastic for interior hardware,doorknobs, shower heads, valves. Explosives ........................................................................................ 16 A complete line of explosives, blasting supplies and acces sories. "Fabrilite" Vinyl Coated Fabrics............................................ 22 Folding door and partition enclosures; vertical blinds; wall covering; furniture upholstery. 144 "Fairprene" Coated Fabrics..................................................... 23 Tarpaulins. "Hylene" Organic isocyanates .............................................3,4 Foams, acoustical tile, finishes, adhesives and synthetic rubbers. "Hyperion*1 Synthetic Rubber ............................ Floor tile, roofing, caulking, exterior paints. 4 "Lucite" Acrylic Lacquer and Paints................................25, 28 Exterior and interior finishes. "Lucite" Acrylic Resins ............................................................... 93 Lighting lenses, signs, displays, canopies, screens, sky lights, bathroom accessories and trim; refrigerator parts, etc. "Ludox" Colloidal Silica.......................................................53, 54 Anti-slip treatment for floor wax; improved heat and water resistance of adhesive coatings; anti-soil treatment on various surfaces. "Mylar" Polyester Film ............................................................... 46 Facing acoustical tile, partitions, wall covers. Neoprene Synthetic Rubber ......................................................4,5 Window gasketing, vent pipe flashing, roofing, waterproof ing, jacketing of electric cable, bridge bearings pads. Polyethylene Film .......................................................................... 46 Moisture and vapor barriers; temporary enclosures; pro tective wrapping of construction materials. Solvents ..............................................................................................131 Removing tars, paraffins, gum, etc. Sulfamic Acid.................................................................................. 57 Removing scale and deposits from masonry. Synthetic Fibers............................................................................... 104 For rugs, draperies, upholstery. ("Dacron", nylon, "Orion") Titanium Metal................................................................................ 92 Structural metal and alloy ingredient. "Tontine" Vinyl Fabrics ............................................................. 22 Shades, vertical blinds, lightproofing. "Vexar" Plastic Netting ............................................................. 46 Room dividers, trellises, and other decorative uses. "Viton" Fluoroelastomers ......................................................... 5 Applications up to 600F. in air, chemicals, and most liquids. Weed and Brush Killers ............................................................. 61 Control of unwanted vegetation. "Zytel" Nylon Resins ................................................................. 95 Household appliances, hardware, drawer slides and bear ings; mechanical parts, such as door latches, gears, bear ings, etc. Electrical and Electronic Industries Acetate Film .................................................................................... 45 Capacitor and magnetic tape manufacture. Acetate Yam ................................................................................... 104 Wire serving and tapes. "Alathon" ...................................................................................... 93 Electrical insulation, includingsignal-control cable,street lighting cable, anda number of radio, telephone and television cables. Amine 248 ...................................................................................... 49 Curing agent for electrical potting compounds. "Armalon" Coated Glass Fabrics, Tapes and Laminates.. 23 Electrical insulation. DUP210010934 INDUSTRIES SECTION "Dacron" ............................................................................. 104 Non-woven tapes, fabrics. "Delrin" (Molding and Extrusion Powder] ...................... 93 Electrical components; abrasion-resistant coatings for wire and cable; control cable sheathings. DMF--Dimethyl Fomtamide ................................... Degreasing and defluxing electronic parts. 51 "Elvox" ................................................................................. 13 IVax modifier for dielectric coating and potting compounds. Expansion Rivets .................................................................. 20 As a "blind" rivet for fastening assemblies partially or totally inaccessible from the rear. "Freon" C-318 Octafluorocydobutane .......................... 80 Dielectric gas and heat transfer agent for transformers, cables and electronic devices. "Freon" Solvents.................................................................. 80 Cleaning electrical motors and components. "Freon-12" ........................................................................... 79 Vapors are used alone and with air, nitrogen or carbon dioxide mixtures for leak testing electrical and electronic components for cracks, holes or manufacturing defects. "Hypalon" Synthetic Rubber .......................................... 4 Base for wire and cable protective jackets. Insulating Varnishes ........................................................... 31 Coatings to waterproof and to improve dielectric proper ties of fabric covered electrical wires and cables. "Lecton" Coated Fabrics and Laminates.......................... 23 Electrical insulation. "Lucite" (Molding Powders)................................................ 75 Automobile instrument dials, tail light lenses and reflectors; lighting fixtures. Luminescent Chemicals (Phosphors)................................... 90 Cathode ray tubes, including television tubes for black and white and color television receivers; scintillation counters; focusing plates for ultraviolet microscopy; screens for electron microscopes. Methylene Chloride ............................................................. 8 Cold cleaning mixtures for electric motors. "Mylar" ................................................................................. 46 Layer insulation in dry and liquid filled capacitors; coil, phase, slot liner and wedge insulation in motors and gen erators; dry type and liquid filled transformers; barrier tape for wire and cable; suggested for a mica support and as a base for various types of electrical, industrial, and magnetic recording tapes; electrostatic speaker diaphragms; as a laminate for printed circuit boards. Neoprene ............................................................................. 4, 5 Base for wire and cable protective jackets. Nylon ......................................................................................104 Wire serving, braid and tapes. "Orion" ................................................................................ 104 Non-woven tapes, wire serving, slot liners. Perchlorethylene .................................................................. 8 Vapor degreasing; vapordrying; cold cleaning mixtures for electric motors. "Perone" Hydrogen Peroxide............................................ 11 Etching germanium transistors. Polyethylene Film ................................................................ 46 Electrical tapes and insulation systems. Potassium Silicate--Solution--Electronics 200 ............. 55 Coating cathode ray tubes with phosphors. Precious Metal Compositions ............................................ 7 Special preparations of gold for application on semi-con ductors, special capacitors and printed circuits; palladiums and platinum for capacitors. Pyromellific Dianhydride .................................................... 20 Curing agent for epoxy potting and laminating systems. Ruyun Textile Yarns ............................................................104 Wire serving, braid, tapes, and lacing twines. Resistor Compositions ......................................................... 6 Mfr. of fired-on resistor components for electronic circuits. Rubber Chemicals ................................................................130 Compounding ingredients, curing agents, antioxidants, colors, softeners, mold release agents and other chemicals for use in compositions for wire and cable insulations and jackets. "Rulan" Flame-Retardant Plastic ..................................... 94 Insulation for many types of wires and cables where flame resistance is important; components for radio, telephone, and television. Silicon, Hyperpure ............................................................... 92 Transistors and other electronic applications. Silver Preparations (Conductive) ..................................... 6 Printed circuits; solder seal; static shielding; electroplating base. "Super Cordura" Rayon Yarn ..........................................104 Lacing cords and twines. "Teflon" Film ...................................................................... 46 Capacitors; wire and cable; printed circuitry and flexible cable; form parts; wrapped electrical insulation. "Teflon" Resin (Aqueous Dispersion) ................................ 94 Cast film for capacitor layer insulations; coated glass fabric and laminates for electrical insulation; wire enamels for magnet wire. "Teflon" Resin (Molding and Extrusion Powders)........... 94 Spacers for coaxial cables; inserts for coaxial connectors; tube sockets; insulation for high-frequency, high-tempera ture and high-voltage wires and cables; high-quality wrap ping tape for insulation in motors, generators and con ductors. Trichlorethylene...................................................................... 8 Vapor degreasing; cold cleaners. "Volan" ............................................................................... 58 Bonded glass fiber insulation. Wire Enamels........................................................................ 33 Insulating coatings for electrical wires and cables. "Zytel" Resin (Molding and Extrusion Powders) ........... 95 Abrasion-resistant jacketing for electrical wires and cables; coil forms of many types; wire connectors; strain-relief grommets; switch components. Explosives and Pyrotechnics Industries Ammonium Nitrate............................................................... 19 Commercial and military explosives. Ammonium Sulfamate ......................................................... 49 Flame retardant treatment of clothing. "CM" Flame Retardant ..................................................... 50 Flame retardant treatment of clothing. 145 DUP210010935 INDUSTRIES SECTION j. Cyclotrimethylenefrinitramine .................................................. 20 Chloroform ............................................................................ 8 Shaped charges, "Primacord" and explosive specialty items. Vapor degreasing solvent in specialized applications in Dyes ....................................................................................... 66, 67 cluding precision instruments. Colors for smoke flares. Colors (Inorganic) ................................................................ 6 Pigmentation in porcelain enamels for sanitary ware, h .> Fuse (Mild Detonating)................................................................. 20 stoves, signs, etc. Explosives and Accessories......................................................... 14 Columbium Metal ................................................................ 92 Hexamethylenetetramine ........................................................ 52 Ductile metal of low thermal neutron cross-section. Base Lead Azide .............................................................................................. 19 Detonators. Mixed Acid ...................................................................................... 19 Nitrating agent in manufacture of explosives, TNT, smoke less powder and nitroglycerin. Penfaeryfhrite Tetranitrate ....................................................... 20 Detonators and safety fuses. for high temperature alloys. Copper Plating Chemicals................................................... 9 Electroplating; protective, decorative, and conductive me tallic deposits on parts and shapes fabricated from iron and steel. Copper Sulfate .................................................................... 50 Electroplating copper; galvanic copper coatings; lubricant in wire drawing; algaecide in water treatment. "Pyrocore" Detonating Cord ................................................... 20 High-velocity detonating cord. Copperas (Ferrous Sulfate) ................................................ 50 Precipitant in water purification; boiler feed water treat Sheet Explosive ............................................................................ 20 ment for removal of silica. High explosive application and special applications as ex plosive swaging, metal hardening, metal forming, shaped charges or wherever thin layers of a high-velocity Class A explosive is desired. Cyanide Mixtures ................................................9, 10, 11, 12 Case hardening of steel (heat treatment). "Duclean" Sulfuric Acid--Technical ............................... 51 Pickling iron and steel; removing deposits such as rust, Smokeless Powder ........................................................................ 21 hard water scale, boiler scale, etc. . Propellant for military and sporting rifle and shotgun ammunition. "Duclean" Hydrochloric Acid--Technical ........................ 51 Pickling iron and steel; removing deposits such as rust, Sodium ....................................... 12 hard water scale and boiler scale. Sodium azide for detonators. Dyes .................................................................................66, 67 Sodium Phosphate--Di ............................................................... 56 Colors for anodized aluminum. Boiler feed water treatment and water softening. Electropolishing' Solution ................................................... 9 Strontium Nitrate .......................................................................... 57 Electropolishing stainless steel. Flame colorant in pyrotechnics, signal flares, and tracer "Elvacet" ............................................................................. 12 bullets. Foundry core binder; adhesive for wooden patterns; pro Sulfur ................................................................................................. 57 Black powders; matches and pyrotechnics. TNT (Trinitrotoluene) ................................................................... 20 Detonators. Trichlorethylene ............................................................................ 8 Rocket flushing. "X-12" Flame Retardant ........................................................... 58 Flame retardant treatment of workmen's clothing, welder's screens, drop cloths, etc. tective coatings quench bath. "Elvanol" ............................................................................. 13 Protective coatings (temporary); surface protection for casting molds to prevent work from sticking to sides. "Elvax" ................................................................................. 13 Strippable coatings. Expansion Rivets.................................................................. 20 "Blind" riveting of assemblies partly or totally inaccessible from the rear. Fluxes, Soldering and Tinning............................................ 51 Compound fluxing agents. Fabricated Metal Products Industry Formaldehyde ..................................................... 51 Addition Agents ............................................................................8, 9 Electroplating baths. Aluminum Enamels....................................................................... 6 Porcelain enamels for use on aluminum alloys. Ammonium Chloride ................................................................... 49 Galvanizing, tinning and soldering flux; dry cells and bat teries; plating solutions; purifying flux for Babbitt metal; electrolytic zinc. Bright nickel plating baths; preservative for cutting oils; acid inhibitors. "Freon" Solvents.................................................................. 80 Degreasing agents. Heat Treating Compounds ............................................11, 12 Heat treating of metals. "Hitec" Heat Transfer Salt ................................................ 19 Cleansing of extrusion parts contaminated with certain plastics; heating and cooling liquid-temperature range "Armalon" Fiber Felt ................................................................. 23 Gaskets exposed to corrosive chemicals. 300-1000F. Hydrofluoric Acid .............................................................. 52 Cadmium Plating Products......................................................... 9 Pickling stainless steel; removal of siliceous scales from Electroplating; protective, decorative, and conductive me steel products and castings; etching, cleaning and pickling tallic deposits on parts and shapes fabricated from iron light metals; anodizing aluminum in electroplating baths; and steel. protective chemical coatings on magnesium alloys. DUP210010936 INDUSTRIES SECTION Hydrogen Peroxide ............................................................. 10 Rust proofing; anti-pitting agent in electroplating baths; defiring soldered silver; purifying metal salt solutions in nonferrous metal refining. HydroxyaceHc Acid ............................................................. 52 Electropolishing, metal cleaning and soldering flux. Industrial X-ray Film ......................................................... 86 Non-destructive testing of castings and welds. Chloride ............................................................. 8 Fluid for thermometric and thermostatic equipment. Methylene Chloride ............................................................. 8 Secondary refrigerant in cold-testing and cold-treating in stallations; vapor degreasing solvent in specialized applica tions; cold cleaners; paint removers. "Mylar" ............................................................................... 46 Base for pressure sensitive masking tape used in plating solutions; (when metallized and printed) tough, inexpensive nameplate or sign, reflectors; laminations to metal for protection against corrosion, tarnishing and for decorative purposes. Perchiorethylene .................................................................. 8 Vapor degreasing; vapor drying agent; cold cleaner; high gravity- and dielectric-fluid in instruments. Phosphoric Acid .................................................................. 55 Rust-proofing and paint-bonding coatings on steel and galvanized surfaces; anodizing aluminum. Photographic Films and Papers .................................... 84-89 Non-destructive testing of parts; design work. Potassium Cyanide ............................................................. 12 Nitriding of steel; electroplating. Potassium Silicate .............................................................. 55 Binder in welding rod coatings. Sheet Explosive .................................................................... 20 Special applications as explosive swaging, metal hardening and metal forming. Silver Preparations (Conductive) ....................................... 6 Printed circuits; solder seal; static shielding; electroplating base. Sodium ................................................................................. 12 Ferrous and nonferrous metal descaling; heat transfer medium; elimination of metal impurities in ferrous and nonferrous metal refining. Sodium Acid Fluoride ......................................................... 55 Electroplating solution ingredient. Sodium Bichromate ............................................................. 56 Pickle and bright dip ingredient for copper alloys; protec tive coatings in magnesium alloys; corrosion inhibitor in aqueous systems; temporary rustproofing of steel. Sodium Carbonate ............................................................. 56 Cleaning and degreasing metals; electroplating solutions; fluxing agent in enameling frits; removal of sulfur from iron; molten heat treating bath for stainless steel. Sodium Cyanide .................................................................. 12 Case hardening of steel; electroplating; cleaning sheet and plate steel; neutralizing of steel after pickling. Sodium Metasilicafe ........................................................... 56 Metal cleaning and degreasing. Spdium Perborate ............................................................... 11 Electroplating baths as anti-pitting agent. Sodium Phosphate--Di ..................................................... 56 Water softening and boiler feed water treatment; prebonderizing treatment of galvanized coatings. Sodium Silicate ...............................................................56, 57 Binder in welding rod coatings in foundry core binders; separating mediums and coatings for transformer and re sistance coils; enameling slip; adhesive for metalboard and aluminum foil paper; treatment of water to prevent corrosion of pipe lines, etc., hot top collars for pouring steel ingots; insulating coating on electrical steel; metal cleaning and degreasing; ore flotation. Sodium Silicofluoride ......................................................... 57 Flux and opacifier in vitreous enamels; cover flux in remelting secondary aluminum. Sodium Sulfide .................................................................... 57 Darkening copper alloy surfaces; precipitating heavy metals from plating solutions. Sodium Sulfocyanide ........................................................... 12 Black nickel plating; cyanide copper plating. Sulfamic Acid ...................................................................... 57 Lead, copper, nickel and indium plating baths; lead electro refining; anodizing; cleaning and pickling. Sulfur ..................................................................................... 57 Magnesium smelting flux; oxidation inhibitor in magnesium casting molds; sulfurizing steel. "Teflon" Film ...................................................................... 46 Low friction and anti-stick surfacing on metals. Tin Plating Products ................................................. 9 Electroplating; protective, decorative, and conductive me tallic deposits on parts and shapes made from iron and steel. "Ti-Pure" VG ...................................................................... 92 Vitreous enamels for iron and steel. Titanium Metal .................................................................... 92 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Trichlorethylene .................................................................. 8 Vapor degreasing solvent; high gravity- and dielectric-fluid in instruments. X-ray Intensifying Screens ................................................ 86 Used in combination with x-ray equipment and film for diagnostic purposes. Zinc Ammonium Chloride .................................................. 58 Galvanizing flux. Zinc Chloride ...................................................................... 58 Dry cell batteries; hot dip tin, solder, and lead coating flux; electrogalvanizing; flux for purifying Babbitt for re-use. Zinc Plating Products ......................................................... 10 Electroplating; protective, decorative, and conductive me tallic deposits on parts and shapes of iron and steel. "Zytel" (Molding and Extrusion Powders) ...................... 95 Hardware; hand tools; plumbing supplies and fittings; drapery slides; cutlery. Food Industry Acetate Film ................................................................ 45 Package laminations, small window boxes, overwrapping for products where minimum shrinkage is required. Adipic Acid .......................................................................... 48 Acidulant for processed foods. 147 DUP210010937 INDUSTRIES SECTION S5?t Xi Aluminum Ammonium Sulfate--N.F........................................ 41 Firming or crispening agent in processing pickles; clarify Sodium Bicarbonate--U.S.P. .:................................................ 55 In manufacturing baking powders and self-raising flours; II ing agent for process and boiler water; anti-cracking agent neutralizing agent for acidity in food processing; condition in ice manufacture. ing agent in food cooking, candy manufacture, etc. Aluminum Sulfate I.F................................................................. 49 Same as Aluminum Ammonium Sulfate above. Sodium Carboxymethyicellulose (CMC) ................................20 Stabilizer for ice cream. Thickener and suspending agent I Mi "Armalon" Coated Glass Fabrics ......................................... 23 for food and pharmaceutical pastes, gels and jellies. Anti-stick and anti-friction conveyor belts and covers for Sodium Cyanide ........................................................................... 12 heat sealing units. Fumigation of flour mills, etc. Calcium Peroxide .......................................................................... 10 Preparation of bread dough developers. Sodium Metasilicate ..................................................................... 56 Packing house, dairy, and general industrial cleaning. Cellophane ..................... ,............................................................. 45 Packaging for many food and non-food products. Sodium Nitrite--U.S.P.................................................................... 20 Rapid-curing salt for pork and beef products. i "Cel-O-Seal" Bands ................................................................ 47 Secondary seals for glass-packed food items. Sodium Phosphate--Di ............................................................ 56 Emulsifier in manufacture of processed soft cheese and Chloroform ........................................................................... 8 evaporated milk products; water softening. Extraction of heat labile oils and fats. Sodium Silicate ........................................................................56, 57 "Duelean" Hydrochloric Acid ................................................ 51 Adhesive in closing paperboard containers; oil and grease Removing hard water scales from evaporators,bottle wash resistant coating on paper barrels and tubs. - ing machines, condensers, and heatexchangersmade from steel. Sodium Sulfate SR ........................................................................ 57 Mineral stock feeds. "Elvocet" ........................................................................................ 12 Greaseproof paper coatings. Sulfamic Acid ................................................................................ 57 Acid cleaning for removal of scale deposits from dairy, "Elvanol" ........................................................................................ 13 sugar and brewery equipment. Greaseproof paper coatings. Sulfur ................................................................................................. 57 "Elvax" ............................................................................................. 13 Sulfur dioxide for preserving and bleaching foods, fruits, Moisture vapor barrier and heat-seal coatings. syrups, etc.; deodorizing and fumigating. Formaldehyde--U.S.P.................................................................... 51 Disinfectant; deodorant. "Teflon" Film ................... '..........................................................46 Anti-stick surfacing. "Freon" C-31 8 ...........................................................,................ 80 Aerosol food products and flavoring extracts. "Teflon" Resin .............................................................................. 94 Non-adhesive surfaces for bakery rolls; candy molds. Lactic Acid--Food Processing ................................................ 53 Tetrahydrofuran ............................................................................ 10 Flavoring agent and preservative inprocessing cheese, Extraction of alkaloids. pickles, olives, carbonated beverages, jams, and infant p foods; extraction of pectin from apple pomace; softening Thiodipropionate Antioxidant ................................................. 58 of brewing and other process waters; purifying gelatin. Thiodipropionate antioxidant for edible fats and oils. "Lucite" (Molding Powders) .................................................... 93 Lighting fixtures to protect from glass shattering hazard; drink dispensers. Methylene Chloride .............................................. Extraction of heat labile oils and fats. 8 "Mycoban" .................................................................................... 54 Mold and rope inhibitor in bread, cakes, pies, other bakery goods and certain cheeses. "Mylar" .......................................................................................... 46 Packaging for heavy produce, gifts, and items with sharp points, odd shapes and long shelf life. Vacuum packaging Titanium Metal .............................................................................. 92 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Trichlorethylene ........................................................................... 8 Extraction of alkaloids; heat transfer agent in sterilization of canned foods. Trimethylamine .............................................................................. 58. Intermediate for choline salts and quaternary ammonium salts. "Vexar" ........................................................................................... 46 Produce and novelty packaging. of meats, cheese and poultry, conveyor belts. Paraformaldehyde ....................................................................... 55 Forest Products Industry Disinfectant; deodorant. Perchlorethylene ............................................................................ 8 Heat transfer agent in sterilization of canned foods. Polyethylene Film .................................................... 46 Packaging produce, textiles and consumer products. Rotofilm ............................................................................................ 87 For making etching resists especially in gravure printing of labels and packages. Ammonium Sulfate ...................................................................: 49 Flame retardant. Copper Sulfate .............................................................................. 50 Wood preservative. CZC Chromated Zinc Chloride ............................................. 50 Wood preservative and flame retardant. "Deenafe" Insecticides ............................................................. 60 Screen Process Film ......................... 87 Control of major pests of forest. -- For producing photographic stencils for silk screen print - ing of labels and packages. "Elvocet" ........................................................................................ 12 Base of bonding adhesives for wood and sawdust. 148 DUP210010938 INDUSTRIES SECTION "Elvanol" .................................................................................... 13 Adhesive and binder for wood and sawdust. "Elvax" ........................................................................................ 13 Adhesives for wood-film laminates;moisture vapor barrier coatings. Formaldehyde ........................................................................... 51 Synthetic adhesives for bondingplywoods and structural pieces; cork products. Hydrogen Peroxide .................................................................. 10 Bleaching of furniture and wood. "Lignasan" ................................................................................ 53 Anti-staining agent. "Melsan" ................................................................................... 60 Protection against mold; sap stain control. Paraformaldehyde .................................................................... 55 Synthetic adhesives used for bonding plywoods and struc tural pieces. Perchlorethyiene ........................................................................ 8 Preservation, extraction and accelerated drying of lumber. Sodium Bisulfite ......................................................... Solubilizing vegetable tanning extracts. 56 Trichlorethylene ........................................................................ 8 Preservation, extraction and accelerated drying of lumber. Urea ............................................................................................. 58 Seasoning and bending of lumber; intermediate for ureaformaldehyde resins used in wood adhesives, impregnation of wood, and waste wood binder. Weed and Brush Killers .......................................................... 61 Control of unwanted vegetation. Zinc Chloride ............................................................................. 58 Preservation of wood. Graphic Arts Industry Aluminum Chloride .................................................................. 50 Photographic fixing baths. Cellulose Sponge ...................................................................... 90 Wiping negatives and prints. Colors ......................... Coloring paper, textiles, printing inks, etc. 119 Commercial Photographic Films (See Photographic Films) ............................................. ...87,88 For duplicate negatives. "Cronar" Polyester Graphic Arts Films .........................84-88 For lithographic and photoengraving negatives and posi tives. Dimethyl Formamide ....................................................,.......... 51 Solvent in printing inks for textiles and plastic sheeting. "Cronaflex" Engineering Reproduction and Drafting Films ............................................ ,,......... . . .87, 88 Reproduction intermediates; second originals, reductions, original drawings and tracings. "Cronapaque" Photographic Print Films .......................... 89 Photogrammetry, murals, displays and exhibits. "Duponol" ......................................................................... -- 69 Surface active agent for cleaning rollers and plates. "Dycril" Photopolymer Printing Plate ................................ 90 Letterpress relief plate made photographically. Dyes .................................................................................66, 67 Coloring textiles, paper, carbon paper, typewriter ribbons, inks. "Elvaeet" ............................................................................. 12 Bookbinding adhesive; photosensitive stencil screens. "Elvanol" .............................................................:.............. 13 Photosensitive stencil screens; surface protection of etch ings; molded printing plates and rollers. "Elvax" ................................................................................. 13 Hot melt adhesives; polymer base for printing inks. "Fabrikoid" .......................................................................... 22 Bookbinding. Formamide ............................................................................ 52 Adhesive modifier. "Freon" TF Solvent ............................................................. 80 Film cleaner. Hot Melt Bookbinding Adhesives ................ 30 Binding paper together; binding outside covers to maga zines, etc. Hydrogen Peroxide ............................................................. 10 Oxidizing agent in blueprint developing. "Litho" Photographic Paper .............................................. 88 Line reproduction medium for all types of reproduction processes. "Lucite" (Molding Powders) ...................................... Hot melt adhesives; coatings; signs. 75 "Ludox" ..........................................................................53, 54 Precoating for photo sensitized papers for higher color contrast in final print. Monomethylamine ............................................................... 54 Intermediate in the manufacture of photographic de velopers. "Mylar" ..................... 46 Base for pressure sensitive tapes that are thin and tough; drawing surface in cartography and drafting; temporary support medium. Neoprene Latex ................................................................ 4, 5 Additive for paper pulp to impart wet strength, chemical resistance and other properties. Nitrocellulose ...................................................................... 19 Lacquers; enamels; bronzing liquids; photographic film. Paper Lacquers .................................................................... 32 Imparting special properties to papers. Perchlorethyiene ................................................................. 8 Cleaning printing rolls; photographic film lacquer. Photographic Chemicals ...............................................86,90 Developers and fixers for photographic films and papers. Pigments ..................................................... t............. . - 91, 92 Pigmenting paper, textiles, printing inks, etc. "PX" Book Cloth ....................... Bookbinding. 23 Rotofilm ............................,................................................... 87 ' Used for making etching resists, especially for gravure printing. Screen Process Film ..................................... .................. 87 For producing photographic stencils for silk screen printing. Sign Finishes ........................................................................ 32 Undercoats; sign enamels; stencil paste and clear sign fin ishes fof silk screen stencil, press printed, gum printed and lithographed metal signs. ^ 149 DUP210010939 INDUSTRIES SECTION Sodium Carboxymethyl Cellulose .......................................... 20 Desensitizing in offset printing. Perchlorethylene ........................................................................... 8 Vapor degreasing and vapor drying of glassware. Sodium Metasilicate ................................................................... 56 Cleaning and degreasing metal platesprior to etching; general industrial cleaner. Precious Meta! Preparations.................................................. 6, 7 Decorating in the ceramic industry; capacitors, printed circuits and semi-conductors. Sodium Sulfocyanide ................................................................. 12 Film developer solution. "Quilon" ........................................................................................ 55 Finishing treatment of glass fabrics. Sodium Thiosulfate--Photographic Quality ...................... 57 Fixing agent to dissolve unchanged silver salts. Salt Cake ........................................................................................ 55 Batch ingredient in making glass. Trichlorethylene ............................................................................ 8 Silicon, Hyperpure ....................................................................... 92 Cleaning printing rolls; remoistening adhesives for print Diodes and transistors. ing rolls; type cleaners; photographic film cleaning; de veloper in special photoengraving and photolithographic Silver Preparations (Conductive) ............................................ 6 I processes. Printed circuits; solder seal; static shielding; electroplating base. Urea ............................................................................... ... .............. 58 Silk screen and roller screen printing. Sodium Carbonate--Anhydrous ............................................ 55 Fluxing ingredient in enamels, glazes and frit; manufacture Non-Metallic Mineral Products Industries of glass; deflocculating agent in clay slips. Sodium Silicate .................................................................. . .56,57 Refractory and acid-proof cements; coloring roofing gran Aluminum Chloride ..................................................................... 50 Manufacture of roofing granules. ules; abrasive wheel cements; deflocculating agent in clay slips; cement-asbestos products; briquetting glass batches; peptizing agent; enamel frits and pottery glazes. Ceramic Products ..................................................................... 6,7 Fluxes; colors; stains. Sodium Silicofluoride ................................................................ 57 Opacifying agent in making glass; fluxing ingredient in Chrome Complexes ............................................ 50 vitreous enamels and chinaware glazes. Water resistant bonding agent for glass fibers in reinforced plastic laminates. Trichlorethylene .................................... ,..................................... 8 Solvent for protective glass coatings (silicone); vapor de Colors (Inorganic) .......... [ Decorating in the ceramic industry. 6 greasing solvent for glassware. "Volan" .................................................................................. 58 "Elvacef ........................................................................... 12 Water resistant bonding agent for glass fibers in reinforced I! Binder in ceramic ware, clay and sand; adhesive in tile plastic laminates. board; preparation of tile cement; binder in asbestos build ' ing materials and plaster; sizing and finishing of glass fibers; binder in insulating materials; strengthening agent in Paint, Pigment, and Varnish Industries cement; emulsifying agent. "Elvanol" .....................................................................................'. 13 Photosensitive films for stencils used in decorating ceramics Adipic Acid ................................................................................... 48 Modified alkyd resins for finishes. and glassware; ceramic binder. Formaldehyde ................................................................................ 51 Adhesives for packing, sheeting, gaskets, etc., preservative Aluminum Sulfate ......................................................................... 49 Aluminum hydrate fillers; Mars yellow; color lakes; dry colors; pigments. - for asphaltic roofing and road materials; disinfectant. Aniline ............................... 19 Fibrous Potassium Titanate ("Tipersul") .......... ............... 92 Dyes'; paints; varnishes; pharmaceuticals. , The most efficient thermal insulator known on either a "Cel-O-Seal" Bands ................................................................... 47 volume or weight basis in the temperature range of 1300"F. Secondary seal for aerosol packaged products. to 2200F. Colors ...................................................... '...................................... 119 "Freon" Solvents .......................................................................... 80 Coloring paints, varnishes, etc. Degreasing agents for plastic parts and wire enamels. Copper Cyanide ................................... 9 Glass Enamels .............................................................................. 6 Pigment in anti-fouling marine paint. Vitreous enamels for glassware, beverage bottles and other containers. Copper Sulfate .................................................................:.......... 50 Pigments. Hydrofluoric Acid ......................................................................... 52 Etching and frosting glass; pickling glass molds; increasing porosity of porcelains. "Ludox" ................. '................................................................. 53; 54 Binder for inorganic fibers, mineral materials; ingredient in specialty cements. Copperas ........................................... Prussian blue; iron oxide pigments. 50 "Decalin" Solvent .................................................................... 71 Dimethyl Formamide ................................................................ 51 Resin solvent. Methylene Chloride ................................................................... 8 Heat transfer medium indecorations forChristmas trees Dimethyl Sulfate............................. 51 Dye intermediate such as anisole, methyl hydrazine sulfate. and similar novelties; vapor degreasing solvent forplastic parts. Dyes ........................................................................... ............66, 67 Coloring varnishes and staijis. 150 DUP210010940 INDUSTRIES SECTION "Elvac&t" .................................................................................... 12 Vehicle for water-thinned paints, primers and sealers; sur face protection. "Elvanol" ................................................................................... 13 Surface protection (film); water paint binder; thickener; emulsifying agent. Formaldehyde ............................................................................ 51 Synthetic resins and pentaerythritol for paints and var nishes. "Freon" Propellents......................!................................... 79, 80 Propellents for aerosol paints. "Hexalin" Cydohexanol ........................................................ 53 Solvent for varnishes, etc. Hydrogen Peroxide .................................................................. 10 Bleaching oils. "Hylene" .................................................................................. 3,4 Constituent of urethane polymers used for highly weatherresistant, clear varnishes. "Hypalon" .................................................................................. 4 Base for durable, colored, weather-resistant, and chemical resistant paints. "Hytrol" ...................................................................................... 53 Solvent for lacquers, especially those containing nitro-cellulose or polyvinyl chloride and its copolymer; thinner for lacquers. Intermediate Chemicals ........................Alphabetical Section Synthesis of pigments, varnishes, etc. "Lucite" (Methacrylate Polymers) ........................................ 93 Ingredients in finishes. "Ludox" ................................................................................53,54 Adhesion agent in water emulsion paints for anti-soiling painted surfaces. Methylene Chloride .................................................................. 8 Active solvent ingredient of non-flammable paint removers. Neoprene ................................................................................. 4, 5 Base for chemical- and corrosion-resistant maintenance paints. Nitrocellulose ........ ,....,.......................................................... 19 Lacquers; enamels. Paraformaldehyde .................................................................... 55 Synthetic resins for paints and varnishes. Perchlorethylene ...................................................................... 8 Solvent. Pigments .......................................................................................128 Coloring of paints, varnishes, etc. Potassium Silicate .................................................................... 55 Carrier in flame retardant and heat resistant paints. Pyromeilitic Acid; PyromelliticDianhydride ...................... 20 Modified alkyd resins andestersplasticizers. Dianhydride used for curing epoxy coatings. "Shlrlem" Fungicide ............................ Fungicide to be incorporated in paint formulas. 70 Sodium Bichromate ............................................... Zinc, barium, lead and other chrome colors. 56 Sodium Cyanide ............... Pigments. 12 Sodium Metasilicate ............................ 56 Detergents for cleaningprocessingequipment, containers, etc. Sodium Silicate ...............................................................56, 57 Inorganic carrier and binder in flame retardant and corro sion proof paints; calcium silicate pigments; colors and fillers; paints for separating steel sheets during annealing operations; cold water paints. Sodium Sulfate ............................................ ....................... 57 Blanc fixe; ultramarine and other dry colors. Sulfamic Acid ........................-............................................ 57 Nitrite removal in diazotization of dyes and pigments. Surface Active Agents ........................................................ 132 Wetting; scouring; dispersing; emulsifying; surface tension reducing detergents. Tetrahydrofuran ......... Resin solvent. 10 ' "Tefralin" Solvent .. .:....................................................... 71 Titanium Pigments ............................................................... 92 Prime hiding white pigments for paints, varnishes and lacquers. Trichlorethylene .................................................................. 8 Solvent; thinner for asphaltic paints; several types of alkyd resin paints; certain epoxy, chlorinated rubber and ethyl cellulose based paints. Urea ......................................................................... 58 Intermediate in preparation of flame retardant paints, and modified alkyd resins. Zinc Chloride ...................................................................... 58 Zinc chromate primers and paints; paint driers; cellulose acetate for lacquers; preservative in cold water casein paints. f Petroleum Industry Diglycolic Acid .................... :.............................................. 50 Oil well emulsion breakers. Dimethylamine ....... ........................................................ . . 51 Additive for gasoline stabilizers. Dimethyl Formamide ........................................................... 51 Selective refining solvent for acetylene, acid gases and petroleum constituents. Diphenylamine .................................................................... 19 Antioxidant in greases and oils. DMF Antistall Additive ....................................................... 51 Added to gasoline to prevent engine stalling during cool, humid weather. Dyes ..................................................................................66,67 Colors for waxes and candles. "Elvanol" .............................................................................. 13 Low water-loss cement. . "Elvax" .................................................................... 13 Wax additive to improve flexibility, toughness, adhesion. "Fairprene" Coated Fabrics ............................................ 23 Gaskets, diaphragms, washers and packings. Formaldehyde ................................................................. 51 Acid inhibitor to control hydrogen sulfide corrosion in oil wells; stabilizer for fuel oils; refining petroleum products; disinfectant. " Fuel Oil Additive ............................................................81,82 Reducing rate of formation of insoluble residue in fuel oils and reducing filter clogging. 151 DUP210010941 INDUSTRIES SECTION l. II:: Gasoline Antioxidants ............................................................... 82 Sodium Phosphate--Di ............................................................. 56 Reducing formation of gum and precipitation of lead in Water softening; treating boiler feed water. gasoline. . Sulfamic Acid ................................................................................ 57 Gasoline Colors ............................................................................ 82 Imparting identifying colors to gasoline. Scale removal from heat exchangers, condensers, compres sor jackets, piping, etc.; oil well descaling agent; water "Hexalin" ................................................................................. 52 treatment. Intermediate for lube oil additives. Sulfur ................................................................................................. 57 Sulfur dioxide and sulfuric acid for bleaching and refining "Hitec" Heat Transfer Salt ...................................................... 19 Heating and cooling liquid. petroleum: high pressure lubricating oils; cutting oils. Sulfur Trioxide .............................................................................. 57 Hydroxyacetic Acid ....................... Oil well emulsion breakers. 52 Sulfating and sulfonating agent. I !| "Hytrol" .......................................................................................... 53 Lube oil additive. Surface Active Agents ................................................................ 132 Oil well acidizing. "Teflon" Film .................................................................... ...46 Jet Perforators .............................................................................. 19 Explosive devices for perforating of oil well casings. "Lorol" ...............'........................................................................... 53 Gaskets and seals; chemical barriers. Tetraethyl Lead Compounds ............................................... 82,83 Increasing octane number of aviation and motor fuels. Intermediate for preparation of lubricating oil additives. Titanium Metal .............................................................................. 92 Lube Oil Additive ................ 82 Structural metal and alloy ingredient where lightness, Providing detergency for motor oils underlow-tempera strength and corrosion resistance are required. ture stop-and-go driving conditions and improving viscosity index. Titanium Pigments ....................................................................... 92 "Ti-Pure" titanium dioxide and "Ti-Cal" titanium calcium "Lucite" (Molding Powders] ..................................................... 93 pigment as prime hiding white pigments for paints, var Water cooling towers. nishes and lacquers. Metal Deaetivators ..................................................................... 82 To improve storage stability of petroleum distillates. Methylene Chloride ..................................................................... 8 Dewaxing lubricating oils; dewaxing solvent for oil wells. "Mylar" .......................................................................................... 46 Laminated to aluminum foil or papers (kraft or asbestos) to form a moisture and chemical resistant construction for protecting thermal insulation and other equipment; base Trichlorethylene ............................................................................ 8 Diluent for cutting oils, heavy lubricants and hydraulic fluids; dewaxing solvent for oil wells. Urea ................................................................................................... 58 Extractive crystallization of hydrocarbons in petroleum refining. Weed and Brush Killers .............................................. 61 Control of unwanted vegetation. 8! for pressure sensitive tapes that resist chemical attack.' Zinc Chloride .................................................................................. 58 1 Neoprene ...................................................................................... 4, 5 Preparation of oil well completion fluids. ! Synthetic rubber base for oil well packers, oil hose and "Zytel" (Molding and Extrusion Powders) ...................... 95 : other products requiring great resistance to petroleum and Rod guides; tubing. its derivatives. Nitrobenzene .................................................................................. 19 Solvent in purification. "Ortholeum" Grease Stabilizer ........................................: 82 Stabilizing greases. "Ortholeum" Lubricant Assistant .......................................... 82 Improving film strength and imparting rust-preventive properties to mineral oils. Perchlorethylene ................ Fuel oil additives. 8 _ Public and Private Utilities and institutions "Alathon" .............. 93 Insulation for weatherproof line wire and other electrical uses. Aluminum Ammonium Sulfate ............................................. 49 Clarifying agent in filtration ofsmall water supplies, swim ming pools, etc.; boiler feed water treatment. Phenyl-alpha and beta-Naphthylamines ..................... 82 Antioxidant for greases and lubricating oils. Cellulose Sponge and Sponge Yorn ........... ................... 36, 37 General cleaning. Rust Preventive .............................................................................. 82 Added to petroleum distillates to reduce rusting and engine stalling. Seismo-Writ Recording Paper ................. Seismographic field recording in oil exploration. 88 Sodium ............s........................................................................ 12 Tetraethyl lead; desulfuring petroleum products. Chloroform ...................................................................................... 8 Disinfectant; laboratory solvent. "Combo" Sponge .......................................................................... 36 General cleaning. , Copper Sulfate ........................................ 50 Algaecide in treatment of potablewaters, swimming pools, etc. Sodium Carboxymethyl Cellulose .......................................... 20 Copperas ........................................................................................ 50 Oil well drilling muds. Boiler feed water treatment for removal of silica; water Sodium Nitrite ............................................................................... 20 purification. t Heat transfer salts. , ' Detergents ...................................................................................... 56 DUP210010942 INDUSTRIES SECTION "Elvacet" ..................................................................................... 12 Waterproofing foundations; paint vehicle. "Elvox" ....................................................................................... 13 Non-skid rug coating; moisture vapor barrier coatings. "Fabrilite" Coated Fabrics ..................................................... 22 Germicide; deodorant. Fluoroscopic Screens ................................................................. 86 Medical diagnostic use. Formaldehyde ............................................................................ 51 Germicide; deodorant. "Freon" Solvents ................................................................. 79, 80 Fungicides ...................................................................................123 Specific attack on fungi attacking flower bushes, hedges, etc. "G B S" Bisulfate ..................................................................... 56 Cleaning toilet bowls, sanitary ware, flooring, etc. Insecticides .................................................. Specific attack on insects. "Lucife" (Molding Powders) ................................................... 93 Lighting fixtures and diffusers; glazing. "Ludox" ............................................................................... 53,54 Increasing hardness and slip resistance in emulsion floor waxes; anti-soil treatment of carpets and painted surfaces. Medical X-ray Film ........................................................... 85, 86 Medical diagnostic use. Methylene Chloride .................................................................. 8 Laboratory solvent. Motion Picture Film .............................................................84,85 Record purposes. "Oxone" .................................................................................... 11 Powdered laundry bleaches; bleaching agent in powdered cleansers and bowl cleaners; stain remover for plastic ware. Neoprene ................................,............................................... 4, 5 Base for wire and cable protective jackets. Perehiorethylene ...................................................................... 8 Spotting agent; cold cleaner; heat transfer agent in mois ture analyses. "Perdox" .................................................................................... 11 Stain remover for plastic dishware. Photographic Chemicals............................... X-ray diagnosis and record purposes. 90 Photographic Films ............................. Record purposes. 84,85,88 Photographic Papers ......................................................... 88, 89 Record purposes. "Rug Anchor" Underlay ........................................................ 23 Preventing rugs from slipping. Sodium Carbonate--Anhydrous .................. ...................... 56 Soda-lime softening of water; pH control in alum clarifica tion of potable waters; pressure and foam type fire extin guishers; general cleansing agent and detergent. Sodium Metasilicate ....................... Water softener and cleaning compound. 56 Sodium Perborate Tetrahydrate .......................................... .11 Bleaching agent in powdered cleansers; stain remover for plastic dishware. Sodium Phosphate--Di ....................................... i................. 56 Water softening and boiler feed water treatment. Sodium Silicate ...............................................................57, 58 Treatment of water to prevent corrosion of pipe lines, boiler tubes, etc. Sulfamic Acid ...................................................................... 57 Chlorine stabilization and pH reduction in swimming pools. "Tontine" Washable Window Shade Cloth.................... 23 Trichlorefhylene .................... r............................................ 8 Spotting agent; cold cleaners; laboratory solvent. Weed and Brush Kiiiers..................................................... 61 Control of unwanted vegetation. X-ray Intensifying Screens ................................................ 86 Medical diagnosis. Pulp, Paper and Paper Products Industries Acetate Fi6lm0 ........................................................................ 45 Window cartons and window envelopes. Adhesives ............................................................................. 48 Weatherproof adhesives for laminated paperboard. "Aiathon" ........... Coatings for paper and paper products. 93 Aluminum Complex 101--Technical ............................... 49 Water repellent and sizing agent; for insolubilizing various water soluble and swellable coatings. Aluminum Sulfate ................ 49 Precipitation of rosin in paper sizing; pH and pitch control in unsized ground wood newsprint and absorbent paper manufacture; satin white coating pigment and special sizes; water purification. Ammonium Sulfamate and Ammonium Sulfate............... 49 Fire resistant compositions. "CM" Flame Retardant ..................................................... 50 Chrome Complexes ............................................................. 50 Improving bond strength in paper based laminates. "Dacron" ............................................................................. 84 Specialized papers, papermaker's dryer felts. Dyes ............................................................................. . . 66, 67 Coloring paper and paper products. "Elvacet" ............................................................................. 12 Grease-proof coating and sizing; binder; surface coatings; increasing wet strength; adhesive. "Elvanol" ........................... 13 Paper size for increasing strength; top size on paperboard for high gloss printing; grease-proof coating and sizing; adhesive. "Elvax" .................................................................... 13 Wax additive; hot melt adhesive moisture vapor barrier; heat seal coatings. Flame Retardants .......................................... Treatment of paper, paper products, cellulosics. 51 Formaldehyde ...................................................................... 51 Hardening agent for proteins for coated paper and blue print paper; wet-strength paper; disinfectant and preserva- . tive. Formamide .............................................................. Hydrolysis of pulp. 52 Hexamethylenetetramine .................................... Hardening agent for proteins for coated paper. 52 153 DUP210010943  V" INDUSTRIES SECTION Hydrogen Peroxide ............................................................. 10 Bleaching wood pulps; de-inking waste paper. Hydroxyacefic Acid ............................................................. 52 Adhesives emulsifier. "Hyfrol" ................................................... Solvents for resins in paper coating. 53 "Lignasan" X Fungicide ..................................................... 53 Slime control in white waters; pulp preservation; preserva tive in starch adhesives and paper sizes. "Lorol" ................................................................................. 53 Anti-foam agent. "Ludox" .......................................................................... 53,54 For frictionizing bags, cartons and boxes to impart anti slip characteristics; as a precoat or coating additive in coated papers. Mineral Adhesive Solution ................................................ 54 Bonding metal foil to paper. "Myeoban" .......................................................................... 54 Non-toxic mold inhibitor. "Mylar" ............................................................................... 46 Laminating to papers' and box board for reuse containers, grease and moisture-proof resistance, decorative surface; tympan paper; windows in cartons and envelopes. Station ery supplies such as typewriter ribbons, file folders, divider sheets, page protectors and index cards. Neoprene Latices ...............................................................4, 5 Additives for pulp to make paper having wet strength, chemical resistance and other special properties. Nylon ....................................................................................104 Specialized papers, papermaker's dryer and wet felts, rein forced paper tapes for box and carton construction. "Orion" Acrylic ................................................................. 104 Specialized papers. Paper Lacquers ...................................,............................... 32 To give gloss, grease-, oil-, heat-, and moisture-resistance, and heat sealing properties. Paraformaldehyde ............ 51 Hardening agent for proteins for coated paper; wet-strength .paper; disinfectant and preservative. . Perchlorethylene .................................................................. 8 Solvent for waxes and resins for sizing and coating papers; solvent for removing wax and pitch; solvent in waxed paper adhesives. Pigments, Ceramic .............................................................. 6 For coloring paper and paper products. Pigments, Colored ............................................................... 91 Beater coloring and coating paper. "Quilon" .......................................................... 55 Water repellent and sizing agent; anti-blocking or release agent; insolubilizing various water soluble or swellable coatings. Salt Cake ........................... Sulfide coking liquor in kraft pulp preparation. 5$ Sodium Carbonate--Anhydrous ....................................... 56 De-inking and pulping waste paper; pulping rags and straw; pH control in multistage bleaching of pulp; cleaning rags; rosin and casein sizes; soda pulp. Sodium Carboxymethyl Cellulose ....... ..,.......... . Surface sizing and beater additive. 20 154 Sodium Hydrosulfite ............................................................ 67 Bleaching ground-wood pulp. Sodium Hyposulfite ............................................................ 57 Antichlor in bleaching pulp and paper; pitch controlling agent. Sodium Peroxide ...... Bleaching wood pulps; de-inking waste paper. 11 Sodium Phosphate--Di .................................................... 56 Casein paper coatings: special pulps for absorbent paper and tissues; treating boiler feed water. Sodium Pyrophosphate ..................................................... 56 De-inking paper stock; thinning clay slip for paper coating. Sodium Silicate .............................................................. 56, 57 Beater sizing; adhesive for solid fiber and corrugated paper board; stabilizer in peroxide ground wood bleaching; grease-proofing paper; de-inking waste paper stock; dispers ing clay coating and filling stock. Sodium Sulfide .................................................................... 57 Sulfide control in kraft pulping; bleached straw pulp; cook ing flax in manufacture of cigarette paper. Sodium Sulfite ...................................................................... 57 Antichlor in bleaching; cookingliquor in semi-chemical pulping; chestnut chip. Sulfamic Acid ...................................................................... 57 Felt shower water pH adjustment;descaling and cleaning equipment; amine sulfamates for paper softeners and flame retardants. Surface Active Agents ........................................................ 132 Wetting; scouring; dispersing; emulsifying; surface tension reducing; detergents. ~ Tetrahydrofuran .................................................................. 10 Solvent for resins in coating paper. "Ti-Pure" ............................................................................. 92 Brightening and opacifying paper in wet end or in coating. Titanium Metal .................................................................... 92 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Trichlorethylene .................................................................. 8 Solvents for waxes and resins for sizing and coating papers; solvent for wax and pitch removal; solvent in waxed paper adhesives. Urea ......................................................................................... 58 Urea-formaldehyde resins for imparting wet strength and as binders for clay coatings; softener or plasticizer for glassine paper and similar products; ingredient of flame retardant compositions. `"Volan" ............................................................................... 58 . For improving the bond strength between paper and resin in paper-based laminates. "X-l 2" ................................................................................. 58 Flame retarding agent for paper products. "Zepar" BP Reducing Agent ........................................ 71 Bleaching ground wood pulp. Zinc Ammonium Chloride ................................................... 58 Flame- and rot-retarding agent in building paper. Zinc Chloride ........................................................................ 58 Vulcanized fiber; de-fibering old parchment paper. "Zoron" ............................................................................... 71 Wet strength resin for paper. "Zytel" Soluble Resin ....................................................... 95 Coatings for paper. : DUP210010944 INDUSTRIES SECTION Rubber and Plastics Industries Accelerators for Natural and Synthetic Rubber ......... 1,2 Adipic Acid .......................................................................... 48 Ester-type plasticizers for synthetic resins including poly vinyl chloride, polyvinyl acetate, polyvinyl butyral, and cellulose acetate; polyester resins including modified alkyds for finishes and wire enamels. "Adiprene" C Urethane Rubber ...................................... 4 For products that must have exceptional abrasion resist ance, high tensile strength and low temperature brittle paint. "Adiprene" L Liquid Urethane Rubber .......................... 4 For products that must have excellent resistance to abra sion, oxidation and ozone. "Alathon" ........................................................................... .93 Electrical insulation and other electrical parts; extruded coatings; sheeting and film; ice cube trays; toys; bowls; tumblers; flexible molded bottles; pipe and tubing; closures; miscellaneous molded products. Aluminum Sulfate ............................................................... 49 Coagulating synthetic rubber latex; water clarification; casein hardening. Amine 248 ............................................................................ 49 Manufacture of polyamide resins; curing agent for epoxy resins. Ammonium Chloride .................... 49 Resinifying or hardening agent for liquid phenolic and urea formaldehyde resins; gelling agent in sponge rubber. Ammonium Sulfamate ....................................................... 49 Flame retardant in regenerated cellulose film. Ammonium Sulfate............................... :............................. 49 Latex coating of textile fiber or cloth. Antioxidants ........................................................................ 2 Improve the aging and service life of natural and synthetic rubbers. "Bufacite" (Flake and Sheeting) ....................................... 93 Interlayer for safety glass; adhesives; flexible coatings and impregnants for cloth. e-Caprolactam .................................................................... 19 Monomer for pyrocaprolactam polyamide type resins. Chloroform ............................................................................ 8 Solvent for cellulose acetate (used in film coating). Cyclohexylamine ................................................................. 19 Preparation of delayed action rubber accelerators. Colors ....................................................................................119 Pigmentation. "Dacron" ...............................................................................104 Reinforcing for V-belts, municipal and industrial fire hose; reinforcing for plastic laminates. "Delrin" (Molding and Extrusion Powder) ...................... 93 Automotive parts such as interior hardware, bushings and bearings for suspension and steering linkages, squirrel cage blowers, gears, instrument clusters, fuel pump and carbu retor parts; electrical components; pump impellers; hous ings and cover plates; showerheads; cutlery handles; tumblers; pen parts; appliance transmission gears; combs; various extruded articles and shapes; tubing (control cable sheathing); coated wire; laminated paper; sheeting; pipe and blow molded aerosol bottles. Diglycolic Acid .................................................................... 50 Resins and plasticizers. Dimethyl Acetamide ........................................................... 51 Resin solvent. Dimethyl Formamide ........................................................... 51 Solvent for resins. Dimethyl Terephthalafe ..................................................... 19 Plasticizer intermediate. Dimefhy'amine .................................................................... j i Intermediate for rubber accelerators. Diphenylamine .................................................................... 19 Antioxidant in rubber chemicals. "Elvacet" .............................................................................. 12 Binder; protective coating; asphalt-proof base coat for linoleums. "Elvanol" ............................................................................. 13 Binder; protective coatings; emulsifying agent; thermo-set ting resin modifier; thickener for latices. "Elvax" ................................................................................. 13 Wax extended, hot melt applied coatings for moisture vapor protection, and heat sealability elastomer raw material. Emulsifying Agents ..............................................................121 "Fabrikoid" Fabrics ........................................................... 22 Tire liners; rubber adhesion preventive. "Fairprene" Coated Fabrics .............................................. 23 Tank linings; diaphragms; gaskets; packings; protective covers, "Fairprene" Sheet Stocks .......................... Tank linings; gaskets; packings. 23 Formaldehyde ................................................................. ...51 Phenolic, urea, and melamine resins; rubber accelerators; hardening agent for casein plastics and adhesives, resor cinol adhesives, etc.; and neutralizing rubber latex. Formic Acid .......................................................................... 52 Coagulating natural latex to obtain crude sheet rubber. "Freon" Blowing Agents ...................... .................... 79, 80 Preparation of polyurethane and other foams. "Freon-113" ........................................................................ 80 Intermediate for chlorotrifluoroethylene. "Freon" Solvents ...........................................................79, 80 Motor degreasing. ' "Hexalin" ........................................................................... 53 Plasticizers. Hexamethylenetetramine .................................................... 52 Curing agent for phenolic plastics; neutralizing agent; rub ber accelerator. Hydrogen Peroxide .......................................... ................. 10 Foam rubber; polymerization catalyst; oxidizing agent. "Hyiene" ........................................................................... 3, 4 Manufacture of urethane foams, finishes, adhesives and rubbers. "Hypalon" ...................... ,........................................ ........... 4 Synthetic rubber used in manufacture of products which are oil resistant, unattacked by ozone, and which have excel lent color stability and resistance to degradation by heat, weather and chemicals. ' "Hytrol" ...;................ ................................... . 53 Solvent for polyvinyl chlorides and copolymers. . Intermediate Chemicals ......................Alphabetical Section Synthesis of elastomers, curing agents, etc. 155 DUP210010945 INDUSTRIES SECTION Lactic Acid ....................................................................... 53 Neutralizing agent in the production of cast phenol-formal dehyde plastics. "Lorol" ................................................................................. 53 Intermediates for polymerization modifiers used in syn thetic rubber manufacture; intermediates for plasticizers. "Lucite" Dental Materials .................................................. 93 Manufacture of dentures, teeth, crowns, inlays. "Lucite" (Molding Powders) .............................................. 93 Automotive parts; comb and brush backs; costume jewelry; crystals for clocks and watches; displays; household items; hearing aids; lenses; signs; lighting fixtures and diffusers. "Ludox" .......................................... 53 As a reinforcing agent in latex foam; for compounding latex products to improve modulus and abrasion resistance; modifying latex adhesives for improved bond strength. Methyl Chloride .................. Synthetic rubber; synthesis of silicones. 8 Methylene Chloride ............................................................. 8 Solvent for rubber base cements, synthetic resin glues, cellulose acetates (usdd in film casting); secondary refrig erant for solvent recovery in film casting operations. Mixed Acid ............................................................................ 19 Nitrating of cellulose. "Mylar" ............................................................................... 46 Tough, stain resistant surface on plastic materials used in decorative applications; release sheet in curing operations. Neoprene ............................................................................ 4, 5 Chemical rubber used in manufacture of products designed to withstand action of oils, solvents, heat, oxidation and sunlight; products with low permeability to gases and those not having flame propagating properties. Nylon .................................................................................... 104 Reinforcing for conveyor belts; reinforcing for plastic laminates; base fabric for coated protective covers; tires; fuel cells; reinforcement for hydraulic hose. "Orion" ................................................................................ 104 Reinforcing for plastic laminates. Paraformaldehyde ................................... 55 Phenolic, urea and melamine resins; rubber accelerators; hardening agent for casein plastics and adhesives; resorcinol adhesives, etc.; preserving and neutralizing rubber latex. Perchlorethylene .................................................................. 8 Solvent for rubber latex and silicone resins. Pigments, Ceramic ............................................................... 6 For dyeing plastics. Polyethylene Film ................................................................ 46 Synthetic rubber overwrap; embossed film for camelback. Pyromellitic Acid, Pyromellitic Dianhydride.................... 20 Polymer intermediates, preparation of ester-type plasti cizers. Dianhydride for curing epoxy resins. Rubber Chemicals .. .............................................................. 1-4 Accelerators; antioxidants; blowing agents; bonding agents; dispersing agents; miscellaneous chemicals; mold lubri cants; peptizing agents; rubber dispersed colors. "Rulan" Flame-Retardant Plastic ..................................... 94 Insulation of wire and cable; extruded tapes; injectionmolded electrical parts. Silver Preparations (Conductive] ..................................... 6 Printed circuits; solder seal; static shielding; electroplating base. 156 5odium Bicarbonate............................................................. 55 Blowing agent in cellular rubber production; miscellaneous mild neutralizing agent. Sodium Cyanide ................................................................. 12 Acrylic resins; rubber chemicals. Sodium Dimethyl Diihiocarbamate ................................ 56 Rubber accelerator. - Sodium Nitrite ..................................................................... 20 Oxidizing agent in production of benzothiazol disulfide and tetramethylthiuram disulfide; vulcanization accelera tors; short stop in cold rubber polymerization. Sodium Perborate .............................................................. 11 Polymerization catalyst Sodium Peroxide ................................................................ 11 Polymerization catalyst. Sodium Phosphate--Di ..................................... :.............. 56 Boiler feed water softening. Sodium Silicate .............................................................. 56,57 Calcium silicate rubber reinforcing filler; stabilizing high zinc oxide content latex emulsions; lead silicate stabilizer in vinyl chloride resin; sizing tire cord; product packaging adhesives. Sodium Silicofluoride ........................................................... 57 Gelling agent in making latex foam sponge rubber. Sodium Sulfate .................................................................... 57 Dyeing rubber thread. Sodium Sulfocyanide ......................................................... 12 Rubber accelerator. Sulfamic Acid .............................................. 57 Inorganic acid curing agent or catalyst for resin polymeriza tion. Sulfur ........................................................................>.......... 57 Vulcanizing agent in natural and synthetic rubber; plastic cement; synthetic rubber. ' "Super Cordura" Rayon ................................... 104 Reinforcing for conveyor belts, tires, hose and V-belts. "Teflon" Film ........................................ Mold release film. 46 "Teflon" Resin .................................................................... 94 Gaskets; packings; chemical equipment components; elec trical insulation; manufacturing equipment where nonsticky surface is needed. Terephthalic Acid ................................................................ 20 Plasticizer intermediate. Tetrahydrofuran ................................................................ 10 Solvent for polyvinyl chlorides and vinylidene chloride copolymers. . Thiodipropionate Antioxidant .......................................... Antioxidant for olefin polymers. "Ti-Pure" ............................................................................. Whitening and opacifying rubber and plastics. . 58 92 Trichlorethylene .................................................................. 8 Solvent for rubber latex; silicone resins; polyvinyl acetate glues. "Tynex" ............................................................................... 76 Fishing leaders and lines; level bristles for household and . industrial brushes; musical and racket strings; tapered bristles for paint brushes; wigs for dolls and mannequins. "Tyzor" ................................................................................. 71 Adhesion promoters for plastic film laminates. DUP210010946 INDUSTRIES SECTION "Unicel" Blowing Agents ......................................... 3,20,21 Blowing agents to produce open or closed cell sponge from elastomers and polyvinyl chloride. Urea ...................................................................................... 58 Urea-formaldehyde resin molding compositions; blowing agent for porous articles. Vinyl Acetate.............................................. \....................... 13 In manufacture of polyvinyl acetate, polyvinyl alcohol, polyvinol butyral, polyvinol formal, and vinyl chloride-- vinyl acetate copolymers. "Viton" Fluoroelastomers ............................................. 5 For products that must withstand unusually high tempera tures in air, chemicals or most liquids. "Zelec" Durable and Non-Durable Antistatic Agents .. 70 Preventing accumulation of dirt due to static attraction on finished plastic products. Zinc Chloride........................................................................ 58 Removing cellulose and reclaiming synthetic rubber. "Zytel" Molding and Extrusion Powders ........................ 94 Machine parts such as gears, cams, bearings, bushings, rollers; coil forms; wire and cable covering; insulating coating; automotive door lock mechanisms and dome light lenses; combs and other sterilizable items. "Zytel" Soluble Resin .......................................... 94 Coatings; textile finishes; adhesives; moldings; hydrocarbon barrier in fuel cells. Soaps, Detergents and Allied Products Industries Aluminum Sulfate ................................................................. 49 Clarifying agent in purification of glycerin, fats, and oils; aluminum soaps; precipitant for sewage and waste disposal. Chlorosulfonic Acid ............................................................. 50 Sulfation of alcohols. Dimethylamine .................................................................... 50 Intermediate for quaternary ammonium compounds. "Elvacet" ................ Home laundry finishes; nylon hosiery rinse. 12 "Elvax" ............................. :................................................. 13 Heat-sealable, moisture vapor barrier coatings. Fluorescent Whites ............................................................. 67 Whitening agents for soaps. Formaldehyde ...................................................................... 51 Deodorant; disinfectants. "Freon" Solvents ................................................................ 80 Degreasing and extraction agents. "G B S" Bisulfate .............................................................. 56 . Compounded toilet bowl and household cleaners. "Hexalin" ...................................................................... 52 Stabilizer and homogenizer for soap and synthetic deter gent emulsions. Hydrogen Peroxide .......................................... 10 Bleaching fats and oils. Hydroxyaeefie Acid ............................................................. 52 Cleansing agents for dairy equipment. "Lorol" 5 ........... 53 Intermediate for synthetic detergent and emulsifying agents. "Ludox" .......................................................................53,54 As an anti-soil component in household rug shampoo. Monomefhylamine ............................................................... 54 Intermediate for surface active compounds. "Ocenoi" ............................................................................. 71 Intermediate for synthetic detergents and emulsifying agents. "Oxone" ............................................................................... II Powdered laundry bleach; detergent-bleach washing com pounds; scouring powders; stain remover for plastic dishware. Perchlorethylene . ................................................................. 8 Dry cleaning detergents. "Perdox" ...............................................................................'ll Home laundry bleach; stain remover for plastic dishware. "Pontamine" Whites ........................................................... 67 Whitening agents for use with soap. Sodium ............................................................ 12 Reducing agent in production of fatty alcohols from, glycerides. Sodium Carbonate--Anhydrous ....................................... 56 Builder in bar, flake, powder and other soap products; compounded alkaline detergents; water softeners and scour ing compounds; saponifying fats and oils; soaps, Sodium Carboxymethyl Cellulose ........................... 20 Soil suspending agent for synthetic detergents; thickening agent; dispersant. Sodium Metasilicate ........................................................... 56 Soap builder; detergents and cleaning compounds; repack aged as cleaner for food processing; dairy, packing house and other industrial plants. ' Sodium Perborate ............................................................... 11 Powdered laundry bleach; floor cleaning compounds; bleaching fats; stain remover for plastic dishware; . bleach ing agent for powdered cleansers. Sodium Peroxide ................................................................. 11 Bleaching agent. Sodium Phosphate--Di ....................................................... ,56 Compounded detergents; repackaged for water softening and as a mild detergent; boiler feed water treatment. Sodium Phosphate--TrI ..................................................... 56 Bottle washing, industrial cleaning compounds. Sodium Silicate ................................................................56,57 Granulated flake and bar soaps and detergents; com pounded cleaners; paint and varnish removers; boiler compounds. Sodium Tripolyphosphate .................................................. 57 Detergent, washing compounds, water softening. Sulfamic Acid ..................................................... ;.............. 57 Sulfation and sulfonation agent. Sulfur Trioxide ................................................................ , 57 Sulfating and sulfonating agent. Surface Active Agents ......................... 132 Wetting; scouring; dispersing;emulsifying;surfacetension reducing; detergents. "Ti-Pure" .... ......................................................................... 92 Whitening and opacifying soap and allied products. Trichlorethylene ................................... 8 Extraction of fats and oils; cleaningmixtures and emul sions; rug cleaners. Urea ................................. 58 Solubilizing agent and extender in synthetic detergents. 157 DUP210010947 INDUSTRIES SECTION \k f T"t iu Tanning Industry Perchlorethylene ........................................................................... 8 Solvent in leather finishes; cleaners for leathers and furs. Aluminum Ammonium Sulfate ...................... 49 ip;?*. Alum tanning of white leathers, furs, lace and rawhide leathers. Aluminum Complex ..................................................................... 49 As a treatment during tanning to impart water repellency and chemical resistance to leather. Pigments ....................................................................................91, 92 Pigmenting leathers. "Quilon" ........................................................................................ 55 Producing water repellent, dry-cleanable garment leather, and chemical and water resistant shoe upper leather. Aluminum Potassium Sulfate........................ Alum tanning of white leathers and furs. 49 Sodium Bicarbonate .................................................................. 55 Controlling acidity and pH in chrome tanning; mild alkali for tanning and finishing. Aluminum Sulfate......................................................................... 49 Alum tanning for rawhide, sheepskin and white leathers. Sodium Bichromate .................................................................... 56 Source of chromium in one-and two-bath chrome tanning. Ammonium Chloride ............................................................... 49 Deliming and bating skins. Sodium Carbonate--Anhydrous ........................................... 56 Neutralizing acidity and pH control in chrome tanning; Cements .......................................................................................... 49 cleaning vegetable tanned leather for bleaching; wool if jj Colors ................................................................................................119 scouring. Coloring leathers. Sodium Cyanide ............................................................................ 12 Dimethylamine .............................................................................. 51 Unhairing of hides. . Dehairing agent. Sodium Sulfate ................................................................. 57 Dyes ........................................................................... 66,67 Loading leather; pigmenting white leathers. Dyeing leathers. "Elvacet" ........................................................................................ 12 Sodium Sulfide .............................................................................. 5J Dehairing hides; depilatory in wool pulling. Base adhesives for leathers; leather finishes; binder for scrap leather. "Elvanol" ........................................................................................ 13 Sodium Thiosulfate ......................... 57 Reducing agent in second bath of two-bathchrometanning process for kid skins andlight leathers. . Base adhesives for leather; leather finishes; binder for scrap leather. Surface Active Agents ................................................................ 132 Wetting; scouring; dispersing; emulsifying;surface tension Fertous Sulfate .............................................................................. 51 reducing; detergents. Mordanting and dyeing furs. Formaldehyde ................................................................................ 51 Tetrahydrofuran .............................................. Solvent in leather finishes. 10 Tanning agent for white leather and sole leather; manu facture of mouton fur; hardening agent for "proteins for leather finishes; disinfectant. Formic Acid .................................................................................... 52 Deliming and dyeing leathers and furs. "Ti-Pure" '...................................................................................... 92 Whitening agent for leather. Trichlorefhylene ........................................................................... 8 Solvent in leather finishes; leather,sheepskin,and fur cleaners. "G-942" .......................................................................................... 52 Tanning lightweight skins to produce white, colored and specialty leathers. "Zoron" ................................................................... Seasoning base for glossy top leather finishes. 71 Hydrogen, Peroxide ............................. Bleaching of furs and hides; fur carroting.'. 10 Hydroxyacefic Acid ..................................................................... 52 Bating, dehairing, deliming and plumping hides. "Hytrol" .......................................................................................... 53 Solvent in leather finishes. Lactic Acid ............................... 53 Deliming, drenching and plumping; pH controlof vege table tanning liquors. Leather Processing Agents ............................................... . .125 "Lucile" Methacrylate Polymers ............................................ 6 Impregnants for leather; ingredients of leather finishes. "Mylar" .................................................................. 46 Lamination to leather goods for scuffresistance and up grading of inexpensive leathers. Nitrocellulose ................................................................................ 19 Leather dopes. p-Nitrophenol ...'......................................................................... 77 Mold inhibitor for leathers. . Paraformaldehyde ....................................................................... 55 Tanning agent for white leather and sole leather; harden ing agent for proteins used in leather finishes; disinfectant. Textile Industry Acetate Yam ..................................................................................104 Fabrication Forms: Broad woven, narrow woven, circular knit, fiat knit and non-woven fabrics. Major End Uses: Men's and Boys' Apparel; Suits and slacks, jackets, sport shirts, linings, neckties. Women's and Misses Apparel: Dresses, underwear, night wear, swimsuits. - Children's and Infants' Apparel: Dresses, underwear, nightwear. Home Furnishings: Piece goods, draperies, curtains, upholstery, bedspreads. Industrial: ElectricaL insulation. "Alathon" ...................................................................................... 93 Coating fabrics. Aluminum Chloride ................................................ Carbonizing of woolen piece goods. 49 Aluminum Complex 101--Technical ............... Water repellent and sizing agent for textiles. 49 Ammonium Sulfamate .......................................... Flame retardants for textiles. 49 158 DUP210010948 INDUSTRIES SECTION Ammonium Sulfate ............................................................. 49 Buffer and exhausting agent in sulfur dyeing of cottons; stripping agent for dyed woolens. Bleaching Agents ................................................................117 Bleaching fibers and fabrics. "Butacite" ............................................................................. 93 Impregnant and coating for cloth. e-Caprolacfam ...................................................................... 19 Monomer for polycaprolactam polyamide-type synthetic fibers. ' Chloroform ........................................................................... 8 Dry cleaners' spotting agent. "CM" ...................................................................................... 50 Flame retardant with after-glow preventives for textiles. "Dacron" .............................................................................. 104 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Uses: _ Men's and Boys' Apparel: Suits, coats, slacks, shirts. Women's and Misses' Apparel: Dresses, blouses, under wear, nightwear, washable service apparel. Home Furnishings: Curtains, piece goods, stuffing mate rials, draperies, casement cloths. Industrial: Sewing thread, reinforcing for Y-belts, fire hose, rope, reinforcing for plastic laminates, filtration fabrics and felts, flatwork ironer covers, webbing, para chutes, papermaker's felts, shoe fabrics. Diglycolic Acid .................................................................... 50 Dyeing of wool. Dyes ................................................................................. 66, 67 "Elvacet" ................................................. Finish for cotton; non-woven fabric binder. 12 "Elvanol" ............................................................................. 13 Size for synthetic fibers and natural fibers; modifier for thermosetting and natural resin finishes; nonwoven fabric binder. "Elvax" ............................................ 13 Wax modifier, flexible flame-retardant finishes; binder for nonwoven fibers; nonskid rug coating. "Fabrikoid" .......................................................................... 22 Belts; luggage linings; card table covers; motion picture screens; sporting goods; etc. . "Fabrilite" ............................................................................ 22 Handbags; pocketbooks; notebooks. "Fabrilife" ........................................................................... 22 Upholstery, shoe uppers, luggage, motion picture screens, table cloths. "Fairprene" Cements .................. 23 Cementing combination for "Fairprene" synthetic rubber sheet stock, "Fairprene" synthetic rubber coated fabrics, rubber, leather, fabrics, paper, metal, wood: "Fairprene" Tape ............................................................... 23 Seam sealant for oil- air-, and water-tight structural joints. "Fairprene" Fabrics ...................................................... ...23 Special industrial applications requiring resistance to oil, chemicals, heat, cold, flame, abrasion, flexing and sunlight. "Fairprene" Sheet Stocks .................................................. 23 Special industrial applications requiring resistance to oil, chemicals, heat, cold, flame, abrasion, flexing and sunlight. Formaldehyde ...................................................................... 51 Crush-proofing chemicals; textile finishing chemicals; siz ing; dye assistant; disinfectant. "Freon" TF Solvent ...................................................................... 80 Spotting agent and solvent for extractables. Hydrogen Peroxide ..................................................................... 10 Bleaching cotton, wool, silk, rayon, linen and blends of natural and synthetic fibers; bleaching vegetable and ani mal fibers; oxidation of dyes. Hydroxyacetic Acid ..................................................................... 52 Dyeing of wool. . "Hytroi" ..................................................................... Solvent. 53 "Lorol" ............................................................................................ 53 Intermediates for textile finishing and softening agents. "Lucite" Methacrylate Polymers ............................................ 6 Coating for fabrics. "Ludox" .......................................................................................... 53 Anti-slip treatment of rayon; strengthening rayon, cotton and wool yarns; anti-soil treatment of pile fabrics. Methylene Chloride ..................................................................... 8 Solvent for cellulose acetates; spotting agent. "Mylar" ...................................................... 46 Decorative yarn; laminated to aluminum foil or metallized and laminated to itself; for metallic yarn; packaging; apparel stays. "Nalan" .......................................................................................... 70 Softener modifier for thermosetting resins used to produce crease resistance and wash-and-wear properties on cotton fabrics. Nylon ................................................................................................104 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun , forms such as cordage, sewing thread, etc. Major End Uses: Men's and Boys' Apparel: Suits, slacks, jackets, under wear, socks, linings. _ Women's and Misses' Apparel: Dresses, blouses, under wear, hosiery, lace, sweaters. Children's and Infants' Apparel: Coats, dresses, sweaters, underwear, socks. Home Furnishings: Rugs and carpets, upholstery, cur tains, piece goods, narrow fabrics. Industrial: Laundry textiles (wash nets and press cov ers),- rope, cordage, twine, fish nets and fishing lines, reinforcement for plastic laminates, filtration fabrics and felts, webbing, parachutes, protective covers (tar paulins, truck covers, etc.), se.wing thread, papermaker's felts, shoe fabrics, seat belts. "Orion" ........................................................................................ 104 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Uses: . Men's and Boys' Apparel: Suit, slacks, sweaters, shirts, uniforms. Women's and Misses' Apparel: Sweaters, suits, skirts, coats, dresses. Children's and Infants' Apparel: Sweaters, dresses, suits. Home Furnishings: Piece goods, blankets, hand knitting yarns. , - Industrial: Sewing thread, reinforcing for plastic lami nates, filtration fabrics and felts, auto tops, protective clothing, seat covers. . 159 DUP21001094 9 INDUSTRIES SECTION "Oxone" ............................................................................... 11 Bleaching agent. Paraformaldehyde .............................................................. 55 Textile chemicals. Perchlorethylene .......................................... Dry cleaning. ' 8 "Perdox" ............................................................................. 11 Bleaching; oxidation of dyes. Pigments .................. Mass coloration of textile fibers. 91,92 "PX" Book Cloth ..................................................... ..... 23 Washable bookbinding. "Quilon" ............................................... 55 Water repellent and sizing treatment for cellulosic mate rials; treating felt hats, wool fabrics and hydrophobic fibers. "Rug Anchor" Underlay .................................................... 23 Sponge rubber underlay. Sodium Bichromate ........................................................... 56 . Chrome dyeing of cottons and woolens; developing natural dyes and aniline black prints on cotton; oxidizing vat and sulfur dyed cotton. Sodium Bisulfite ................................................................. 56 Bleaching woolen piece goods; antichlor in bleaching cot tons; discharging cotton and rayon prints. Sodium Carbonate-^-Anhydrous ..................................... 56 Wool scouring and stripping;neutralizing carbonized woolens; solubilizing and developing agent in direct cotton dyeing; bleaching; printing; washing; desulfuring rayon. Sodium CarboxymethylCellulose .................................... Finishing and warp sizing. Sodium Hydrosulfite ................... Reducing vat dyes. 20 67 Sodium Hydroxide ............................................................. 56 Bleaching, dyeing and finishing. Sodium Metasilicate .......................................................... 56 Detergent and soap builder in laundries. Sodium Perborate .............................................................. 11 Bleaching, oxidation of dyes. Sodium Peroxide ......... ,..................................................... 11 Bleaching; oxidation of dyesparticularly cotton knit goods. Sodium Phosphate--Tri ............ Wool degreasing, cotton processing. 56 Sodium Pyrophosphate....................................................... 56 Kier boiling cotton; scouring wool and rayon; stabilizer in peroxide bleaching of wool, cotton and rayon. Sodium Silicate ...............................................................56, 57 Bleaching assistant. . Sodium Silicofluoride . /..................................................... 57 Laundry sour. Sodium Sulfocyanide ......................................................... 57 Dyeing and printing of fabrics. Sulfamic Acid ........................ 57 Removal of excess nitrites in developed color dyeing. 160 "Super Cordura" Yarn ..................................................... 104 Fabrication Forms; Twisted and spun forms. Major End Uses: Home Furnishings: Backing yarns for rugs and. carpets. Industrial: Thread for bag closing operations, lacing cords, seat belts. Surface Active Agents ...................... :...............................132 Wetting; scouring; dispersing; emulsifying; surface tension reducing; detergents. "Teflon" fiber ..................................................................... 104 Packings, gaskets, diaphragms, filtration fabrics, bearings and felts. Tetrahydrofuran ........... Solvent in fabric coating. 10 Textile Processing Agents ...................................................132 Surface active agents; water repellents; lubricants; sizes; etc. Textile Rayon Yarn .............................................................. 104 Fabrication Forms; Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Usest Men's and Boys' Apparel; Suits, slacks, jackets, shirts, socks, linings, underwear. Women's and Misses' Apparel: Suits, skirts, dresses, underwear, nightwear. Children's and Infants' Apparel: Suits, skirts, dresses, underwear. . Home Furnishings: Rugs and carpets, upholstery, piece goods, curtains, draperies. . Industrial: Shoe fabrics; bags; linings for boxes; caskets and luggage; medical, surgical and sanitary applications; electrical insulation. "Ti-Pure" ............................................................................. 92 . Delustering and opacifying agent for textile fibers. "Tontine" Fabrics ............................................................... 22 Use in visual aid school rooms, forstage curtains and cyclorama backgrounds in schools, "Tontine" Shade Cloth ..................................................... 23 Trichlorefhylene ......................................... Dry cleaning. - ' 8 Urea ...................................................................................... 58 Humectant; softener; size;weighting;urea-formaldehyde resins for creaseproofing and shrinkage control. "X-72" .............,...................................... ........................... 58 Renewable flame retardant treatment of cotton and rayon fabrics. "Zelan" ......................................................................... 70 Imparting water, spot and stainresistance retainedafter repeated laundering or dry cleaning. "Zelcon" Fabric Conditioner ............................... .71 Home laundering preparations. ,, "Zelec" Antistatic Agents .................................................. 71 Processing and finishing hydrophobic fibers and fabrics. "Zesef" Fabric Stabilizer .................................................. 70 Shrink- and crease-resistant finish for Cellulose fibers. "Zytel" Molding Powders.......................................... 94 Mechanical parts for textile machinery, e.g. gears, cams, bearings, etc. ' "Zytel" Soluble Resin ....................................................... 94 Textile finishes. DUP210010950 DUP210010951 GEOGRAPHICAL SECTION LOCATIONS OF OFFICES, PLANTS AND WAREHOUSES Alabama Phone California (continued) Phone Birmingham No. 9 Office Park, Mountain Brook (13)* Explosives Department, Explosives Sales District Office ......................................TRemont 9-0466 2301 Fifth Avenue, South (3) Finishes Division-- ' Automotive Refinishing Materials-- Service Warehouse ........................FAirfax 2-8775 Trade Sales Finishes--Warehouse . .FAirfax 2-8775 4300 Jefferson Avenue, S. W. "Freon" Products Division-- . Warehouse ................................................ STate 5-4103 Watson Explosives Department--Plant Arizona Phoenix 121-23 E. Buchanan Street "Freon" Products Division-- Warehouse ............................. . ALpine 3-8508 California - Antioch "Freon" Products Division--Plant Petroleum Chemicals Division--Tetraethyl Lead Compounds--Plant and Shipping Point Berkeley 2735 San Pablo Avenue (2) Remington Arms Company, Inc.-- Branch Office ................................. THomwall 8-5514 Peters Cartridge Division-- Branch Office ................................. THornwall 8-5514 Burlingame 1600 Trousdale Drive Finishes Division-- Automotive Refinishing Materials-- Regional Office................ OXford 7-3870 Industrial Finishes--Regional Office OXford 7-3870 Trade Sales Finishes--Regional Office .................................................... OXford 7-3870 Los Angeles Film Department--Warehouse Petroleum Chemicals Division--Addi tives--Shipping Point Pigments Department--Warehouse Post Office Box 70, El Monte Electrochemicals Department-- District Office.............................................Cumberland3-2761 2930 East 44th Street (58) Elastomer Chemicals Department-- District Office ........................................ LUdlow 2-6464 Explosives Department-- Chemical Sales--District Office . . . .LUdlow2-6464 Polycheinicals Department--District Office ..................................................: . LUdlow 2-6464 "Freon" Products Division-- Warehouse ............................................ LUdlow 2-6464 2000 South Garfield Avenue (22) Fabrics Division--Branch Office. .. .RAymond 3-8401 Finishes Division-- . Automotive Finishes--Auto Manufacturers' Sales Office. .. .RAymond 3-8401 Automotive Refinishing Materials-- Service Warehouse ....................RAymond 3-8401 Trade Sales Finishes--Warehouse RAymond 3-8401 Specialties Sales--Warehouse .. .RAymond3-8401 612 South Flower Street, Suite 425 (17) Petroleum Chemicals Division-- . Sales Office .......................................... MAdison 4-1354 4455 Fruitland Avenue (58) Film Department--District Office (Industrial Sales with Converter Sales) ...................................................LUdlow 3-3171 7051 Santa Monica Boulevard (38) Photo Products Department-- District Office and Warehouse. . .HOllywood 9-5147 Oakland Film Department--Warehouse 1020 E. Eighth Street Finishes Division-- Automotive Refinishing Materials-- Service Warehouse .................. HIgate4-1980 Specialties Sales--(Auto & Household Sponges) --Warehouse .................... HIgate 4-1980 1991 Dennison "Freon" Products Division-- Warehouse ............................. ,.. . PRospect 6-0270 El Monte Petroleum Chemicals Division--Tetratethyl Lead Compounds--Shipping Point Fresno 1133 Belmont Avenue (1) Finishes Division-- Trade Sales Finishes--Warehouse . .ADams 7-4474 Palo Alfo 701 Welch Road Dyes and Chemicals Division-- District Office.................................. DAvenport 6-7550 Elastomer Chemicals Department-- District Office.................................. DAvenport 6-7550 "Freon" Products Division-- . District Office..................................DAvenport 6-2840 ico . *Numbers in parentheses indicate postal zones. , DUP210010952 OFFICES, PLANTS AND WAREHOUSES California (continued) Phone Palo Alto (cent.) Industrial and Biochemicals Department (Biochemicals) --District Office.. DAvenport 6-6044 Colorado (continued) Louviers Explosives Department--Plant Phone Pasadena 325 N. Lake Avenue, 22-25 Meade Bldg. Pigments Department--Branch Office MUrray 1-7431 Connecticut Bridgeport Sacramento Folsom Blvd. & 60th Street Finishes Division--Trade Sales Finishes--Warehouse ........ GLadstone 1-1074 San Francisco 939 Barnum Avenue (2) Peters Cartridge Division--General Office and Plant.................................................EDison3-1112 Branch Office ........................................ EDison 6-5091 Remington Arms Company, Inc.-- General Office and Plant................................ EDison3-1112 Branch Office ........................................ EDison 6-3366 Pigments Department--Warehouse Fairfield 111 Sutter Street (4)* Film Department (Packaging Sales) (Room 1018)--District Office........ EXbrook 2-0808 Fabrics Division--Branch Office and Plant .....................................................CLearwater 9-3351 Petroleum Chemicals Division (Room 626)--Sales Office.............................. EXbrook2-1934 New Haven 195 Channel Street "Freon" Products Division-- Warehouse .................... , HEmlock 1-9563 1485 Bayshore Blvd., (24) Electrochemicals Department-- District Office.......................................JUniper 6-5141 Pigments Department-- Branch Office .......................................JUniper 5-9231 South San Francisco 46 River Street (13) Industrial and Biochemicals Department-- (Industrial Chemicals) -- District Office .................................... LOcust 2-5145 Stratford 30 Moffitt Street "Freon" Products Division-- Warehouse ............................. .DRexel 8-7384 Post Office Box 608, 160 South Linden Avenue Finishes Division- Automotive Finishes--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Automotive Refinishing Materials--Plant West Hartford 635 New Park Avenue (10) Finishes Division, Trade Sales Finishes-- Warehouse ..............................................ADams 3-8297 Post Office Box 927 Finishes Division, Automotive Refinishing Materials--Service Warehouse.............JUno 3-0733 Delaware Edge Moor Torrance Pigments Department--Plant and Warehouse Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Newport Pigments Department--Plant and Warehouse Colorado Seaford Denver 444 17th Street, Midland Savings Bldg. (2) Explosives Department, Explosive Sales District Office........................ r...............MAin 3-1253 555 Quivas Street (1) Finishes Division-- Automotive RefinisKing Materials-- Service Warehouse........ .................. AComa 2-8945 Trade Sales Finishes-- Warehouse (2) ................................. AComa 2-8945 1700 15th Street (17) "Freon" Products Division--Warehouse MAin 3-3221 Textile Fibers Department (Nylon)--Plant Wilmington Petroleum Chemicals Division--' Tetraethyl Lead Compounds-- Shipping Point Pigments Department--Warehouse Du Pont Building (98) Electrochemicals Department-- General Office ..................... .... Export Division....................... . PRospect 4-1000 .PRospect 4-5354 *Numbers in parentheses indicate postal zones. 163 DUP210010953 i!lj 1 |I i2 if ! OFFICES, PLANTS AND WAREHOUSES Delaware (continued) Phone Florida (continued) phone Wilmington (cont.) Jacksonville (cont.) DuPont Building (Continued) Fabrics Division--General Office ... PRospect 4-1000 Finishes Division-- Automotive Finishes--General Office ................................................PRospect 4-1000 Automotive Refinishing Materials-- General Office ............................. PRospect 4-1000 IndustrialFinishes--General Office PRospect 4-1000 Specialties Sales--Genera! Office. .PRospect4-1000 Trade Sales Finishes--General Office ................................................PRospect 4-1000 Industrial and Biochemicals Department--GeneralOffice............PRospect 4-1000 Polychemicals Department--General Office ....................................................PRospect 4-1000 E. Union and Ionia Streets "Freon" Products Division-- Warehouse ................................................ ELgin 3-5721 Miami 1730 N.W. 23d Street Finishes Division, Trade Sales Finishes--Warehouse.........................NEwton 3-9815 2792 N.W. 24th Street _ _ . "Freon" Products Division-- Warehouse ............................................NEwton 5-2541 Nemours Building (98)* Dyes and Chemicals Division-- General Office .................................'.PRospect4-1000 Elastomer Chemicals Department-- General Office ................................... PRospect 4-1000 Explosives Department, Chemical and Explosive Sales--General Office ................................................PRospect 4-1000 Fabrics Division--Export Sales Office ....................................................PRospect 4-1000 Film Department--General Office, and Export Sales Office ................ PRospect 4-1000 Finishes Division-- Automotive Finishes---Export Office ................................................PRospect 4-1000 Automotive Refinishing Materials-- Export Office.................................PRospect 4-1000 Industrial Finishes--Export Office. PRospect-4-1000 Specialties Sales--Export Office. .PRospect4-1000 Trade Sales Finishes--Export Office ................................................PRospect 4-1000 "Freon" Products Division--General Office ....................................................PRospect 4-1000 Petroleum Chemicals Division-- General Office ................................... PRospect 4-1000 Photo Products Department-- General Office ................................... PRospect 4-1000 Pigments Department--General Office ............................. ......................PRospect 4-1000 Surplus Materials Division-- General Office ................................... PRospect 4-3700 Textile Fibers Department--General Office ....................................................PRospect 4-1000 Tampa 304 South Franklin Street (2) Finishes Division, Trade Sales Finishes--Warehouse ....................... TAmpa 2-2414 101 N. 12th Street "Freon" Products Division-- Warehouse....................................... .TAmpa 2-2264 Trail Ridge Pigments Department--Plant Georgia Atlanta Pigments Department--Warehouse 1261 Spring Street, N. W. Dyes and Chemicals Division-- District Office (9) ................................ TRinity 5-5391 Elastomer Chemical Department-- District Office (3) ................................ TRinity 5-5391 739 West Peachtree Street (8) Industrial and Biochemicals Department--District Office.......................... TRinity6-1586 632 Hamilton Avenue, S. E. "Freon" Products Division-- Warehouse ................................. TRinity 5-5391 Florida Highland 225 Moore Street S. E. (2) Pigments Department--Branch Office. JAckson5-4557 Pigments Department--Plant 1737 Ellsworth Industrial Drive, N. W. (18) Finishes Division--Automotive Jacksonville Refinishing Materials--Regional 2256 Dennis Street (1) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse.......................................... ELgin3-7461 Trade Sales Finishes--Warehouse-------ELgin 3-7461 Office and Warehouse.............................. SYcamore4-9581 Industrial Finishes--Regional Office ...............................................SYcamore 4-9581 Trade Sales Finishes--Regional Office and Warehouse..............................SYcamore4-9581 Photo Products Department- 841 Miami Road, 1603 Prudential Bldg. (7) District Office .................................. SYcamore 4-9581 Peters Cartridge Division--Branch Office ................................... FLanders 9-4252 1430 West Peachtree Street, N. W. (9) Remington Arms Company, Inc.-- Film Department (Packaging Sales) -- Branch Office...................................................FLanders9-4252 District Office..................................................... TRinity2-5828 Numbers in parentheses indicate postal zones. DUP210010954 OFFICES, PLANTS AND WAREHOUSES Georgia (continued) Phone Illinois (continued) Phone Tucker Post Office Box 487 Finishes Division-- Automotive Finishes--Plant Automotive Reiinishing Materials--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Idaho Lewiston Pigments Department--Warehouse Illinois Chicago Petroleum Chemicals Division--Additives-- Shipping Point Pigments Department--Warehouse 7327 W. Agatite Avenue, Norridge (31)* Finishes Division--Trade Sales Finishes--Warehouse........................NAtional 5-7650 7 South Dearborn Street (3) Dyes and Chemicals Division-- District Office...................................... ANdover 3-7000 Elastomer Chemicals Department-- District Office...................................... ANdover 3-7000 Film Department (Packaging and Industrial Sales)--District Office. .ANdover 3-7000 "Freon" Products Division--District Office .................. ANdover 3-7000 Peters Cartridge Division--Branch Office ........................................................... STate 2-7781 Remington Arms Company, Inc.-- Branch Office.............................................STate 2-7781 Textile Fibers Department-- ' Regional Office.................................... ANdover 3-7000 2100 Elston Avenue (14) Finishes Division-- Automotive Finishes--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse 2560 North Elston Avenue (47) Finishes. Division, Automotive Refinishing Materials--Service Warehouse. .BRunswick 8-2050 4251 South Crawford Avenue (32) Industrial and Biochemicals Department (Industrial Chemicals)'-- District Office ................................... CLiffside 4-7676. 4560 Touhy Avenue, Lincolnwood (46) Edgebrook Station Photo Products Department-- District Office and Warehouse. . . ORchard 5-5500 20 North Wacker Drive (6) Pigments Department (Room 1711) -- Branch Office ..................................... ANdover 3-7000 Chicago (cont.) 8 South Michigan Avenue (3) Petroleum Chemicals Division-- Sales Office................................. -.. . RAndolph 6-8630 7250 North Cicero Avenue, Lincolnwood (46) Electrochemicals Department--District Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Explosives Department, Chemical and Explosives Sales District Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Fabrics Division--Branch Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Finishes Division-- Automotive Refinishing Materials-- Regional Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Industrial Finishes--Regional Office Chicago (Nils: INdependence 3-7250 Others: ORchard 5-1010 Trade Sales Finishes--Regional Office Chicago Calls: INdependence 3-7250 Others: ORchard 5 1010 Polychemicals D>. partment--District Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 4718-28 West Roosevelt Road "Freon" Products Division-- Warehouse ............................... . ANdover 3-7000 East St. Louis Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Kankakee Pigments Department--Warehouse Roxana Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Seneca Explosives Department--Plant Western Springs 40--47th Street Industrial and Biochemicals .. Department--(Biochemicals) -- District Office ............................... CHestnut 6-5902 Indiana East Chicago Industrial and Biochemicals Department--Plant "Freon" Products Division--Plant *Numbers in parentheses indicate postal zones. 165 DUP210010955 OFFICES, PLANTS AND WAREHOUSES Indiana (continued) East Chicago (cont.) Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Phone Fortville Industrial and Biochemicals Department--Plant Indianapolis Pigments Department--Warehouse 1825 West 18th Street Finishes Division-- Automotive Refinishing Materials-- Service Warehouse (4) * .............. MElrose 8-5591 Trade Sales Finishes-- Warehouse (7) ............................... MElrose 8-5593 il E. New York Street Freon" Products Division-- Warehouse ....................... '...................MElrose 7-1466 Iowa Clinton Film Department--Plant Davenport 1528-30 W. Locust Street Finishes Division, Trade Sales Finishes--Warehouse ...................DAvenport 2-2861 Des Moines 2--9th Street (4) "Freon" Products Division-- Warehouse ............................................. CHerry 4-2124 Fort Madison Post Office Box 319 Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Kansas Tecumseh Film Department--Plant Kentucky Louisville Elastomer Chemicals Department--Plant . "Freon" Products Division--Plant Pigments Department--Warehouses Kentucky (continued) Phone Louisville (cont.) 3927 Park Drive-- Shively (16) Finishes Division, Trade Sales Finishes--Warehouse ...................... EMerson 8-1659 Wuriland Industrial and Biochemicals Department--Plant Louisiana Chalmetfe Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point New Orleans Pigments Department--Warehouse 4401 Euphrosine Street (25) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ......................... AUdubon 6658 Trade Sales Finshes--Warehouse. . .AUdubon 6658 1400 S. Peters Street "Freon" Products Division-- Warehouse ............................................MAgnolia 4877 Westlake Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Maine Bangor 109 Hildreth Street Finishes Division, Trade Sales Finishes-- Warehouse ................................. BAngor 2-0554 Portland 255 Forest Avenue (3) Finishes Division, Trade Sales Finishes-- Warehouse ........................... .................. SPruce 2-4657 Maryland Baltimore Pigments Department--Plant and Warehouse 400 East Twenty-ninth Street (18) Finishes Division-- Automotive Refinishing Materials--Service Warehouse .........BEImont 5-0278 Trade Sales Finishes--Warehouse. .. .TUxedo 9-6053 Massachusetts Boston 75 Fourth Avenue, Waltham (54) , Finishes Division, Automotive Refinishing Materials--Service Warehouse ................................. TWinbrook 3-2550 .i DUP210010956 OFFICES, PLANTS AND WAREHOUSES Massachusetts (continued) Phone Michigan (continued) Phone Boston (cont.j Detroit (cont.) 140 Federal Street (10)* 19930 Conner Avenue (34) . Elastomer Chemicals Department-- Finishes Division-- District Office...................................................HAncock6-1719 Automotive Refinishing Materials-- Service Warehouse ......................... FOrest 6-8800 Explosives Department, Chemical Trade Sales Finishes--Warehouse. . . FOrest 6-2245 Sales--District Office.......................................................HAncock6-172413000 West Seven Mile Road (35) Polychemicals Department--District Office .........................................................HAncock 6-1711 Elastomer Chemicals Department-- District Office .................................. UNiversity 4-1963 Electrochemicals Department-- 45 Fourth Avenue, Waltham (54) District Office...............................................UNiversity4-1963 Electrochemicals Department--District Industrial and Biochemicals Depart Office ............................ TWinbrook 9-8300 ment (Industrial Chemicals) -- Film Department--(Packaging) District Office ..................................UNiversity 4-1963 Sales)--District Office.............................. TWinbrook9-8300 Pigments Department--Branch Finishes Division, Trade Sales Office ...................................................UNiversity 4-1963 Finishes--Regional Office........... TWinbrook 9-8300 Polychemicals Department--District Industrial and Biochemicals Department-- Office ................................................UNiversity 4-1963 PhD(oIitnOsodtfrfuPiiccsreottrdOiau..flc.f.t.i.Csc..e.h.D..e....em....p...i..ca....a.r..t..l.m.s....)..e.--....n....D.t..--....i..s....t...r...i..c.....t..T..W.....i.n..b. TroWokin9b-r8o3o0k09-8300153"F0WrEeaaorsneth" oHPuarsonedcoucc..kt..s..S.D..t.r.iev..e.i.s.t.i.o..n..-- TEmple 1-2260 359 Washington Street (Malden 48) Pigments Department-- Branch Office and Warehouse. . .DAvenport 2-8080 Ecorse Industrial and Biochemicals Department--Plant Chestnut Hill 824 Boyleston Street (67) Film Department (Industrial Sales)--District Office................ TWinbrook 9-8300 Everett 59 Waters Avenue (49) Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Flint Hamilton Avenue and St. John Street (2) Finishes Division-- Automotive Finishes--Plant - Automotive Refinishing Materials--Plant Industrial Finishes--Plant Specialties Sales--Plant and Warehouse............................................CEdar 2-1104 (Chemicals and Sponges) Montague Elastomer Chemicals Department--Plant Leominster Polychemicals Department--Plastic Products Division--Plant Saginaw 2506 Weiss Road Finishes Division, Trade Sales Finishes--Warehouse ............ .SWift 2-0822 Springfield 233 Page Street (4) Finishes Division, Trade Sales Finishes--Warehouses .......... Michigan . REpublic 2-6216 Minnesota Duluth 742 East Superior Street, Hartley Bldg. (2) Explosives Department, Explosives Sales District Office....................... ........... RAndolph 4-8593 Detroit Pigments Department--Warehouse 5-238 General Motors Building (2) Fabrics Division--Branch Office........ TRinity 5-1990 Finishes Division-- Automotive Finishes--Auto Manu facturers' Sales Office and Color Advisory Service ......................... TRinity 5-1990 Trade Sales Finishes--Regional Office .................................................. TRinity 5-1990 Minneapolis Pigments Department--Warehouse 1401 South 4th Street (4) ' Finishes Division, Automotive Refinishing Materials--Service Warehouse ............................... 4317 Excelsior Blvd. (4) Finishes Division, Trade Sales Finishes--Warehouse ........... *Numbers in parentheses indicate postal zones. - .FEderal 2-0558 .WAlnut 7-9797 167 DUP210010957 OFFICES, PLANTS AND WAREHOUSES Minnesota (continued) phone Minneapolis (cont.) 1207 Foshay Tower (2)* Industrial and Biochemicals Department--District Office ......... FEderal 5-4181 614 Plymouth Building (3) Peters Cartridge Division--Branch Office ...................................................... FEderal 3-5800 Remington Arms Company, Inc.-- Branch Office ........................................ FEderal 3-5800 Rosemont Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point St. Paul 2313 Wycliff Street "Freon" Products Division-- Warehouse ........................................... Midway 6-4869 Missouri (continued) Phone Sf. Louis 2300 Hampton Avenue (10) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse .......................Mission 7-0800 Trade Sales Finishes--Warehouse. . Mission 7-0208 112 West Ferry Street "Freon" Products Division-- Warehouse ............................................. GArfield 1-2203 1810 Arcade Building (1) Peters Cartridge Division--Branch Office ........................................................... MAin 1-8622 Remington Arms Company, Inc. Branch Office ............................................ MAin 1-8622 10 South Brentwood Boulevard (5) Industrial and Biochemicals Department (Industrial Chemicals) -- District Office ................................ PArkview .6-1400 Montana Mississippi Jackson Pigments Department--Warehouse Missouri Billings Petroleum Chemicals Division--Additives-- Shipping Point Cut Bank Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Carl Junction Explosives Department--Plant Joplin 402 Main Street, First National Building Explosives Department, Explosives Sales--District Office ...................... MAyfair 4-5060 Kansas City Petroleum Chemicals Division--Tetraethyl Lead Compounds and Additives-- Shipping Point Pigments Department--Warehouse 1004 Baltimore Avenue (5) Film Department (Packaging Sales) District Office ....................................... GRand 1-6629 6001 Manchester Trafficway (41) Finishes Division-- Trade Sales Finishes--Regional Office ................................................EMerson 3-1390 6015 Manchester Trafficway (41) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ................ .EMerson 3-1390 Trade Sales Finishes--Warehouse.EMerson 3-1390 228 W. 4th Street - "Freon" Products Division-- . Warehouse ...... . . Victor 2-0225 New Jersey Carneys Point Elastomer Chemicals Department--Plant "Freon" Products Division--Plant Petroleum Chemicals Division--Tetraethyl Lead Compounds and Tetramethyl Lead Compounds; "Tetramix" Antiknock Compound--Additives-- Plant and Shipping Point Clifton Dyes and Chemicals Division-- District Office..........................................PRescott 3-5600 Deepwater Dyes and Chemicals Division--Plant Gibbstown Explosives Department--Plant Grasselli Industrial and Biochemicals Department--Plant Newark 25S Vanderpool Street Pigments Department--Plant and Warehouse '`Numbers in parentheses indicate postal zones. DUP210010958 OFFICES, PLANTS AND WAREHOUSES New Jersey (continued) Phone New York (continued) Phone Newark (cont.) Buffalo (cont.) 15 Stern Avenue, Springfield Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ......................... DRexel-6-5151 Trade Sales Finishes--Warehouse . .DRexel 6-6070 Parlin Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials- -Plant Industrial Finishes--Plant Photo Products Department--Plant Paterson 5th Avenue and East 27th Street "Freon" Products Division-- Warehouse .......... .............................COrtlandt 7-3965 Pennsauken 7300 Crescent Boulevard Finishes Division--Trade Sales Finishes--Warehouse ................... NOrmandy 5-2720 Penns Grove Explosives Department--Plant Perth Amboy Electrochemicals Department--Plant Pompton Lakes Explosives Department--Plant Trenton 1750 North Olden Avenue (8) * Elastomer Chemicals Department-- District Office..........................................Export 3-7141 New York Calls: WAlker 5-3290 New York Albany 116 Railroad Avenue (5) Finishes Division, Trade Sales , Finishes--Warehouse .........................ALbany 2-5711 Buffalo River Road, Station B (7) Film Department--"Cel-O-Seal" Bands Division--Gen. Off., Export Sales Office and Plant ......................................TR 6-4420 1696 Walden Avenue (25) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse .......................KEystone7979 Trade Sales Finishes--Warehouse--KEystone8242 595-601 Ohio Street (4) "Freon" Products Division-- Warehouse ................................... . MAdison 8860 11 ion Remington Arms Company, Inc.--Plant Long Island City 48-05 Van Dam Street (1) Fabrics Division--Branch Office......... STillwell 6-0200 Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ........................STillwell 6-0200 Trade Sales Finishes--Warehouse. STillwell 6-0200 Newburgh Fabrics Division--Branch Office and Plant ................................................................. JOhn 1-3700 New York 350 Fifth Avenue, Empire State Bldg. (1) Electrochemicals Department-- District Office .................................... LOngacre 3-6440 Explosives Department, Chemical and Explosives Sales--District Office (Room 4700) .................................. LOngacre 3-6400 Film Department (Packaging and Industrial Sales)--District Office. .LOngacre 3-6400 Industrial and Biochemicals Depart ment (Industrial Chemicals) -- District Office ................................LOngacre 3-6456 Peters Cartridge Division--Branch Office SEE under Bridgeport, Conn. Pigments Department (Room 1027) -- Branch Office................................................... LOngacre3-6400 Polychemicals Department--District Office ......................................................LOngacre 3-6400 Polychemicals Department;--Plastic Products Division--General Office .................................................LOngacre 3-6400 Remington Arms Company, Inc.--Branch Office SEE under Bridgeport, Conn. Textile Fibers Department (Acetate, "Dacron," Nylon, "Orion," Rayon) -- Regional Office........................................... LOngacre3-6400 40 Worth Street (13) Dyes and Chemicals Division-- ............ District Office .................................... COrtlandt 7-3966 "Freon" Products Division-- District Office.................................... COrtlandt 7-3965 Photo Products Department (Calls for "DYCRIL") .......... COrtlandt 7-3966 45 Rockefeller Plaza (Suite 550) (20) Petroleum Chemicals Division-- Sales Office .........................................COlumbus 5-2342 248 West 18th Street (11) . Photo Products Department-- ' District Office and Warehouse. . .WAtkins4-3100 Niagara Falls Electrochemicals Department--Plant ^Numbers in parentheses indicate postal zones. 169 DUP210010959 OFFICES, PLANTS AND WAREHOUSES New York (continued) Phone Rochester Photo Products Department--Plant 95 La Grange Avenue (13)* Finishes Division--Trade Sales Finishes--Warehouse .................... GLenwood 3-2580 Syracuse Bridge Street, East Finishes Division, Trade Sales Finishes-- Warehouse ........................................... GRanite 2-0451 North Carolina Ohio (continued) Phone Akron (cont.) 191 South Main Street (8) Textile Fibers Department ("Dacron", Nylon, Rayon) -- Regional Office ............................. HEmlock 4-6651 Bellevue Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point Canton 205 Reynolds Place, S.W. (2) Finishes Division--Trade Sales Finishes--Warehouse .................. .GLendale 2-9830 Brevard Pigments Department--Plant . Charlotte Cincinnati 2412 Carew Tower (2) Electrochemicals Department-- District Office ............................... PArkway 1-5253 2500 South Boulevard (3) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse.........................JAckson 3-5094 2308 Carew Tower (2) Industrial and Biochemical Department (Industrial Chemicals)-- District Office ................ CHerry 1-4570 Trade Sales Finishes--Warehouse. . . EDison 2-3177 2330 Victory Parkway (6) 427 West Fourth Street (1) Pigments Department--Branch Office. . .AVon 1-2343 Dyes and Chemicals Division-- District Office ....................................FRanklin 5-5561 Elastomer Chemicals Department-- District Office .................................... FRanklin 5-5561 3001-17 Vine Street (3) . Finishes Division, Trade Sales Finishes--Warehouse ................... UNiversity 1-3414 Electrochemicals Department-- District Office ........................................ FRanklin 5-5561 Explosives Department, Chemical . Ci rcleville Sales--District Office.................................... FRanklin5-5561Film Department--Plant Textile Fibers Department (Acetate, "Dacron", Nylon, "Orion", Rayon) -- Regional Office ..............................FRanklin 5-5561 Cleveland Steel Creek Road "Freon" Products Division-- Warehouse .......................................... FRanklin 5-5561 Greensboro 517 Jefferson Building Peters Cartridge Division-- Branch Office .................................BRoadway 2-6879 Remington Arms Company, Inc.-- Branch Office .................................BRoadway 2-6879 Kinston Textile Fibers Department ("Dacron")--Plant Industrial and Biochemicals Department--Plant Pigments Department--Warehouse 20575 Center Ridge Road (16) Film Department--(Industrial Sales) -- District Office ................................ .EDison 3-1424 Photo Products Department-- District Office ........................................ EDison 1-0375 3133 Chester Avenue (14) Finishes Division-- Automotive Refinishing Materials-- _ Regional Office ......................................MAin 1-8516 Industrial Finishes--Regional Office.MAin 1-8516 Trade Sales Finishes-- Regional Office .................................... MAin 1-8516 Ohio 3137 Chester Avenue (14) * - Finishes Division, Automotive Refinishing Materials--Service Warehouse .......... MAin 1-8516 Trade Sales Finishes--Warehouse. .. .MAin 1-8516 Akron 40 East Buchtel Avenue at High Street (8) Elastomer Chemicals Department-- District Office . ......................................POrtage 2-8461 Union Commerce Building (14) Peters Cartridge Division (Room 1308)--Branch Office........ PRospect 1-7804 Remington Arms Company, Inc. (Room 1308)--Branch Office........ PRospect-1-7804 DUP210010960 OFFICES, PLANTS AND WAREHOUSES Ohio (continued) Phone Oklahoma Phone Cleveland (cont.) National City Bank Building (14)* Industrial and Biochemicals Department--(Industrial Chemicals)-- (Koom 1321)--District Office ........ MAin 1-6460 11900 Shaker Blvd. (20) Electrochemicals Department-- District Office ............................LOngacre 1-1580 Explosives Department, Chemical Sales--District Office .....................LOngacre 1-5070 Pigments Department-- Branch Office ........................... LOngacre 1-1060 2981 Independence Road "Freon" Products Division-- Warehouse .............................................. VUlcan 3-3815 101 Prospect Avenue, Suite 1116, Midland Building (15) Petroleum Chemicals Division-- Sales Offices .................................. MAin 1-3422 Columbus 1450 Dublin Road (12) Finishes Division--Automotive Refinishing Materials--Service Warehouse ....................................... HUdson 6-7191 Trade Sales Finishes--Warehouse. .HUdson6-7193 Findlay Remington Arms Company, Inc.--Plant Lockland Pigments Department--Warehouse Cushing Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point Guthrie Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point Heavener Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point Oklahoma City 201 East Hill Street (2) Finishes Division, Automotive Refinishing Materials-- Service Warehouse ....................... JAckson 5-2194 208 East Hill Street (5) Trade Sales Finishes--Warehouse . . .JAckson 5-2194 25 E. Reno Avenue (2) "Freon" Products Division-- Warehouse .............................................CEntral 2-3176 Tulsa 1811 South Baltimore Avenue (19) Petroleum Chemicals Division-- Sales Office ............................................ LUther 3-8581 10 N. Cheyenne "Freon" Products Division-- Warehouse ...............................................Gibson 7-4405 Oregon Miami Fort Industrial and Biochemicals Department--Plant Toledo Industrial and Biochemicals Department--Plant Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point 1930 Tremainsville Road, Post Office Box 953 (1) Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant 330 West Central Avenue (10) Finishes Division, Trade Sales Finishes--Warehouse ......................... CHerry 1-2197 Youngstown 3203 Southern Boulevard (3) Finishes Division, Trade Sales Finishes--Warehouse .......................STerling 8-9688 Portland Pigments Department--Warehouse 5510 Southeast McLoughlin Blvd. (2) Finishes Division--' Automotive Refinishing Materials-- Service Warehouse ........................BElmont 2-6177 Specialties Sales--Warehouse.........BElmont 6-1139 Trade Sales Finishes--Warehouse.BElmont 6-1139 1238 N. W. Glisan Street (9) Pigments Department--Branch Office,CApitol2-6012 1233 N. W. 12th Avenue "Freon" Products Division-- Warehouse . . . .........................................CApitol 7-0561 Pennsylvania Cornwells Heights Industrial and Bioehemicals Department--Plant Moosic Explosives Department--Plant *Numbers in parentheses indicate postal zones. 171 DUP210010961 OFFICES, PLANTS AND WAREHOUSES Pennsylvania (continued) Phone North Bend (Renova) Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point Philadelphia Industrial and Biochemicals Department--Plant Petroleum Chemicals Divisions-- Tetraethyl Lead Compounds--Shipping Point Pigments Department--Warehouse 1616 Walnut Street (3)* Dyes and Chemicals Division-- District Office ...................................... Kingsley 5-1950 Film Department (Packaging Sales)-- District Office .................................... Kingsley 5-4050 Polychemicals Department-- District Office..................................... Kingsley 6-4G00 308 East Lancaster Avenue, Wynnewood (3) Electrochemicals Department-- District Office ......................................TRinity 8-2700 Finishes Division, Automotive Refinishing Materials-- Regional Office.................................TRinity 8-2700 Industrial Finishes--Regional Office .................................................. TRinity 8-2700 Trade Sales Finishes--Regional Office ..................................... -...........TRinity 8-2700 Industrial and Biochemicals Department-- District Office ............ TRinity 8-2700 Photo Products Department-- District Office............................................TRinity 8-2700 Textile Fibers Department (Acetate, "Dacron", Nylon, "Orion", Rayon, "Teflon")--Regional Office.............. TRinity 8-2700 3500 Grays Ferry Avenue (46) Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse 4242 Whitaker Avenue (24) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ....................... GArfield 6-3701 3 Penn Center Plaza (2) Petroleum Chemicals Division-- Sales Office.............................................. LOcust 8-3531 117 South Seventeenth Street, Architects Building (3) Pigments Department (Room 910) -- Branch Office .......................................... LOcust 6-2080 Pittsburgh One Gateway Center Explosives Department, Explosives Sales---District Office .......................ATlantic 1-7777 Petroleum Chemicals Division-- Sales Office--(Room 751) .............. ATlantic 1-2933 2222 Noblestown Road (5) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ..... ..............WAlnut 1-9190 Trade Sales Finishes--Warehouse. .WAlnut 1-7000 Pennsylvania (continued) Phone Pittsburgh (cont.) 1715 Grant Building (19) Industrial and Biochemicals Department--(Industrial Chemicals)-- District Office...................... GRant 1-5427 2001 First National Bank Building "(22) Peters Cartridge Division-- Branch Office ...........................................GRant 1-3076 Remington Arms Company, Inc.-- Branch Office ...........................................GRant 1-3076 3433 Smallman Street "Freon" Products Division-- Warehouse ...........................................MUseum 1-3442 Springfield 730 Baltimore Pike Finishes Division--Trade Sales Finishes--Warehouse ...................KIngswood 3-2126 Towanda Photo Products Department--Plant Rhode Island Rumford 50 North Broadway (16) Dyes and Chemicals Division-- District Office ......................................GEneva 4-6500 "Freon" Products Division-- Warehouse ............................................GEneva 4-6500 Textile Fibers Department (Acetate, . "Dacron", Nylon, "Orion", Rayon) -- Regional Office--Providence , Region ......................... .................. GEneva 4-6500 Providence 217 Broad Street (3) Finishes Division-- Trade Sales Finishes--Warehouse.... GAspee 1-2709 South Carolina Camden Textile Fibers Department ("Orion")--Plant Florence Film Department--Plant Tennessee Chattanooga Textile Fibers Department (Nylon)--Plant DUP210010962 OFFICES, PLANTS AND WAREHOUSES Tennessee (continued) Phone Texas (continued) Phone Columbia Finishes Division-- Specialties Sales (Sponges)-- Plant and Warehouse ...................EVergreen 8-5632 Johnsville Pigments Department--Plant and Warehouse Knoxville 510 Williams Street Finishes Division-- Trade Sales Finishes--Warehouse Memphis Electrochemicals Department--Plant Pigments Department--Warehouse 1573 Union Avenue (3)* Finishes Division--- Automotive Refinishing Materials --Service Warehouse................BRoadway 6-4746 Trade Sales Finishes--(4) Warehouse ................................... BRoadway 6-2745 1701 Steriek Building (3) Peters Cartridge Division-- Branch Office ..................................... JAckson 6-5326 Remington Arms Company, Inc.-- Branch Office ................................ JAckson6-5326 61 W. Georgia Avenue "Freon" Products Division-- Warehouse ............................................JAckson 7-5641 Corpus Christi Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point Dallas Film Department--Warehouse Pigments Department--Warehouse 8510 Ambassador Row (21) Electrochemicals Department-- . District Office................................. FLeetwood 7-4611 Finishes Division--Automotive Refinishing Materials--Regional Office and Service Warehouse........... FLeetwood 7-4611 Trade Sales Finishes--Regional Office and Warehouse....................FLeetwood 7-4611 1241 National Building (1) Peters Cartridge Division-- Branch Office...................................... Riverside 2-6908 Remington Arms Company, Inc.-- Branch Office .................................... Riverside 2-6908 1628 Oak Lawn Avenue (7) ,' Photo Products Departments-- District Office and Warehouse. . . Riverside 1-1404 Santa Fe Building (2) "Freon" Products Division-- Warehouse .......................................... Riverside 2-7111 Fort Worth Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point . Nashville 1406 Broad Street (3) Finishes Division-- Trade Sales Finishes- Warehouses.. ALpine 5-8486 Houston Petroleum Chemicals Division-- Tetraethyl Lead Compounds- -Shipping Point Pigments Department--Warehouse Old Hickory Film Department--Plant Textile Fibers Department ("Dacron" and Rayon) --Plant Texas Amarillo Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point 900 S. Georgia Street Finishes Division--Trade Sales Finishes--Warehouse ........................... DRake 3-2631 Beaumont Elastomer Chemicals Department--Plant Petroleum Chemicals Division-- Tetraethyl Lead Compounds--Shipping Point 3202 Weslayan Street (27) Explosives Department, Chemical Sales--District Office .......................MOhawk 7-9197 Pigments Department (1105 Prudential Building)--Branch Office ................... MOhawk 6-0161 332 South Wayside Drive (11) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ......................... WAlnut 3-2546 Trade Sales Finishes--Warehouse. . WAlnut 3-2521 4215 Richmond Avenue (27) Industrial and Biochemicals Department-- District Office ...................................... MOhawk 6-0251 2601 A West Grove Lane (6) Elastomer Chemicals Department-- District Office .................................... MOhawk 7-7429 705 Bank of Commerce Building (2) Petroleum Chemicals Division--Sales Office .......................................................CApitol 5-1151 Chaison Petroleum Chemicals Division-- Tetraethly Lead Compounds--Shipping Point La Porte "Freon" Products Division-- . Warehouse............... GReenwood 9-2801--Ext. 360 ^Numbers in parentheses indicate postal zones. 173 DUP210010963 OFFICES, PLANTS AND WAREHOUSES ;i W- Texas (continued) Phone Washington (continued) Phone Petroleum Chemicals Division--Additives-- Ferndale Shipping Point ; Orange Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Polychemicals Department--Plant Ml. Vernon ! Strang Petroleum Chemicals Division--Additives-- Industrial and Biochemicals Department--Plant Shipping Point Texas City Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Seattle Film Department--Warehouse Pigments Department--Warehouse Victoria Polychemicals Department--Plant 1127 Washington Bldg. (1) Explosives Department, Explosives Sales--District Office ..............................MAin 3-8830 Utah Salt Lake City Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point 525 Boren Avenue, North (9) Finishes Division, Trade Sales Finishes-- Warehouse ................................................ MAin 2-4165 4003 Aurora Avenue (3), Room 215 Petroleum Chemicals Division-- Sales Office .......................................... MElrose 2-6977 990 So. Sixth Street, West (4)* Finishes Division-- Automotive Refinishing Materials-- Service Warehouse ....................... EMpire 4-3582 Trade Sales Finishes--Warehouse . .EMpire 4-3582 Spokane East 1035 Cataldo Avenue (2) Finishes Division, Trade Sales Finishes--Warehouse ..........................Hudson 3-8111 909 Walker Bank Building (11) Peters Cartridge Division--Branch Office ...........................................................ELgin 5-8686 Remington Arms Company, Inc.-- West Virginia Branch Office......................................................... ELgin5-8686 Belle (Charleston) Industrial and Biochemieals Department--Plant Virginia Bellwood Industrial and Biochemicals Department--Plant Martinsville Textile Fibers Department (Nylon)--Plant Richmond Film Department--Plant Textile Fibers Department (Rayon, Nylon and "Teflon")--Plant Huntington Fourth Avenue and Ninth Street West Virginia Building (1) Explosives Department, Explosive Sales--District Office . ....................... JAckson 5-5124 Martinsburg Explosives Department--Plant Parkersburg Polychemicals Department--Plant 12th and Dinwiddie Avenue (13) "Freon" Products Division-- Warehouse ......................................... BElmont 3-5401 . Wisconsin Barksdale Roanoke 2710 Franklin Road, S.W. (5) Finishes Division, Trades Sales Finishes--Warehouse....................... Diamond 2-3176 WownocU___ Waynesboro Textile Fibers Department (Acetate, "Lycra", and "Orion")--Plant Washington Du F*onf .. " . . Explosives Department--Plant Explosives Department--Plant .... . Milwaukee 2601 North Third Street (21) Finishes Division, Automotive Refinishing Materials--Service Warehouse .............................................. COncord 4-6872 520q N. 124th Street Finishes Division--Trade Sales Finishes--Warehouse ......................... HOpkins 3-0260 126 N. Jefferson Street "Freon" Products Division-^ Warehouse .................................. BRoadway 6-5770 . 'Numbers in parentheses indicate postal zones. DUP210010964 FOREIGN OFFICES, REPRESENTATIVES AND AFFILIATED COMPANIES Argentina Buenos Aires Casilla de Correo 44 E. P. Galpin ......................... Technical Representative Viamonte 1145 Ducilo S.A.I.C..............................................General Office Australia , 7 Kallaroo Road Sydney Lane Cove P. H. Ehrlich........................ Technical Representative 43 Cammeray Road A. G. Rogers ......................... Technical Representative Industrial and Biochcmicals Dept. Belgium Malines 6, Arkstraat DuPont de Nemours (Belgium) S.A. .. General Office Brazil Rio de Janeiro Av. Graca Aranha 333, Caixa Postal 710 DuPont do Brasil S.A...............................Branch Office Sao Paulo Rua da Consolacao 57, Caixa Postal 8112 DuPont do Brasil S.A...............................General Office Canada Montreal, Quebec Du Pont Building, 1135 Beaver Hall Hill, Box 660 Du Pont of Canada Limited...................General Office Toronto, Ontario 85 Eglinton Avenue, East Du Pont of Canada Limited ...................Branch Office Chile Santiago Calle Augustinas 1350, Piso 3 Compania Sud-Americana de Explosivos General Office Colombia Medellin Apartado Aereo 3323 M. E. Noriega .....................Technical Representative Costa Rica San Jose c/o Uribe & Pages, Correo 678 J. R. Ozier ............................. Technical Representative Fabrics & Finishes Department Denmark Copenhagen c/o Elof Hansson A/S, H. C. Orstedvej 4 A R. G. Richardson................ Technical Representative E. H. Rodgers DuPont de Nemours International S.A. Polychemicals England london Bush House, Aldwych, W. C. 2 E. I. duPont de Nemours & Co. (Inc.) General Office 76, Jermyn Street, S. W. 1 DuPont Company (United Kingdom) Ltd. General Office France Paris 77, Champs Elysees DuPont de Nemours (France) S. A. . .General Office c/o S.A.F.I.C. Alcan & Cie., 11, Avenue Kleber E. S. Voutetakis .......... .. .Technical Representative Du Pont de Nemours International S.A. Elastomers Germany Hamburg c/o Nordmann, Rassmann & Co., Kajen 2 Technical Representatives DuPont de Nemours International S.A. T. Gabris ........................................................ Elastomers E. K. Ott..........................................................Elastomers E. R. Rosenberg ........ ....................... .. Pdlychemicals Hong Kong and Japan Hong Kang 8 Clovelly Path, May Road K. Wenzel ............................ Technical Representative Osaka (Japan) c/o American Trading Co. (Japan) Ltd. No. 47, 2-Chome, Andojibashi-Dori, Minami-ku R. J. Dunne.......................... Technical Representative Organic Chemicals Department 175 DUP210010965 FOREIGN OFFICES, REPRESENTATIVES AND AFFILIATED COMPANIES Hong Kong and Japan (continued) Tokyo (Japan} c/o American Trading Co. (Japan) Ltd. No. 1 Shiba Park 7-Gochi, Minato-ku J. C. Moore ...........................Technical Representative Polychemicals Department India Bombay c/o Indmag Private Ltd., Esplanade House, Waudby Road N. J. Gajjar .........................Technical Representative Mexico Guadalajara, Jal. Av. Juan Manuel 1186, Apartado 301 Du Pont, S.A. de C.V.................................. Branch Office Mexico, D.F. Av. Juarez 117, Apartado 1799 Du Pont, S.A. de C.V................................ General Office Av. Juarez 117, Apartado Postal 43 Bis Compania Mexicans de Explosivos S.A. General Office Av. Juarez 117, Apartado Postal 8055 Pigmentos y Productos Quimico, S.A. de C.V. General Office Monterrey, N.L. 1 Era. Caile de Gonzalitos No. 566 Esq. Avenida Fleteros Du Pont, S.A. de C.V.................................Branch Office Netherlands The Hague 15, Burgemeester van Karnebeeklaan, P. O. Box 6007 Du Pont de Nemours (Nederland) N.V. General Office Puerto Rico (continued) Rio Piedras Box 100, R.F.D. 2 W. R. Irey ......................... .. .Technical Representative Industrial and Biochemicals Dept. San Juan Avenida Ponce de Leon #406 (Stop 7'A) Store & Warehouse E. I. du Pont de Nemours & Co. (Inc.) Fabrics & Finishes Department P. D. Chapman, Manager Switzerland Basel St. Johannsvorstadt 80, P. O. Box 43 O. M. Lea ............................. Technical Representative Organic Chemicals Department Geneva 81, Route de l'Aire Du Pont de Nemours International S.A. General Office Zurich Kalkbreiteweg 33, Postfach 147 Du Pont de Nemours International S.A. Branch Office Textile Fibers Union of South Africa Johannesburg 301 Norwich Hall, West Kernick Ave. L.Waller ..................................Technical Representative 47 Empire Rd. Extension, Parktown E. W. Zomosa.......................Technical Representative Industrial & Biochemicals Dept. Peru Lima Avenida Tacna 592, Apartado 2787 Du Pont (Peru) S.A.................................General Office J. A. Woodroffe......................... Service Representative Textile Fibers Department Uruguay Montevideo Andres Puyol 1633 . V. F. Bliss ............ ................ Technical Representative Industrial & Biochemicals Dept. Puerto Rico Phone Ponce Calle Ville 209 . E. I. du Pont de Nemours & Co. (Inc.) Branch of San Juan Store & Warehouse Fabrics & Finishes Department Venezuela Caracas Ave. Sucre No. 53, Dos Cominos Apartado del Este 5582 y 11376 Du Pont de Venezuela, C.A.................... General Office DUP210010966