Document b5LwxpjY2Zk0a2YdJR05jdrQZ

> SPECIALIZED PRODUCTS AND PROCEDURES FOR BUILDING MAINTENANCE AND CONSTRUCTION METCO-LUME PURPOSE Aluminum Roof PreservativeREGIONAL SALES & SERVICE OFFICE 538 Park Drive GARDcNDALE, AL 35071 Rh. 631-5399 To provide a heat-reflective surface that will reduce under-roof temperatures and -- in one application -- rejuvenate, protect and preserve roof coverings. WHAT IT IS A heavy bodied coating composed of specially refined asphalts, plasticizers, carefully screened long-fiber Canadian Asbestos, and pure Aluminum Flakes. WHAT IT DOES Deflects sun rays and prevents heat absorption by the roof itself....resists corrosion, decomposition and disintegration....stays pliable and elastic under all climatic conditions....remains intact even under excessive stress, strain or vibration. ADVANTAGES Reduces temperature of roof structure, and rooms beneath, as much as 15 F. Resaturates and revitalizes existing roof coverings. Positive moisture barrier....stops leaks, decomposition, corrosion. Does not alligator, crack, blister or peel. Stays flexible indefinitely. Expands and contracts with roof movement, vibration, extreme temperature changes. Reduces frequency of repairs. Minimizes roof maintenance cost. Only single coat needed for combined weatherproofing and heat insulation. Lowers cost of operating refrigeration and air conditioning equipment. Safe, easy application. No heating required. APPLICATION USHO 002913 Sweep off all dirt, dust and debris. On gravel-surfaced roofing, remove all loose gravel thoroughly. On metal surfaces, remove rust, scale and unsound coatings. Other side, please THE METALCRETE MANUFACTURING CO. 2446 WEST 25th STREET CLEVELAND, OHIO 44113 Form 227 E-GJ APPLICATION - Continued Repair cracks, breaks and open seams with METCOLASTIC ROOF CEMENT and GLASS ROOFING MEMBRANE. Previously untreated concrete, and dried out roofing felt, should be primed with REJUVENOL ROOF SATURANT. Make sure the surface is dry before all applications. Allow patched and primed surfaces to weather at least 10 days before treating with METCOLUME. New roofs should be allowed to weather 90 days before treatment. METCOLUME requires minimum stirring but should be stirred before application to insure uniform dispersion of the aluminum metal particles. Application may be made with a roof brush, spreader or mastic type spray equipment. Apply at the rate of approximately lh gallons per square on smooth surfaces, and 2 gallons per square on rough surfaces. A uniform film performs best. Avoid excessively thin, or excessively thick applications. COVERAGE Smooth Metal Roofs Corrugated Iron Roofs Composition, Felt, Paper Roofs Concrete Roofs (Primed) Gravel or Slag Roofs 1 - lh gals. per square 1* - 2 It tt n 2 - 2h It ii " 2h2 - It it ii 2h - 4 tt it it PACKAGING 55-Gal. Steel Drums 5-Gal. Steel Pails 1-Gal. Cans (4 to a Case) Shipping Weight It tl It U 495 lbs. 45 " 42 '' -o-o-o-o-o-o-o-o-o-o-o- USHO 002914 THE METALCRETE MANUFACTURING CO. . 2446 WEST 25th STREET CLEVELAND, OHIO 44113