Document aJ8XgNjQBrZ6jwVYw3Zd8Qn6y

At The Great Western Sugar Company, Longmont, Colorado, plant, with Crane Iron Body Wedge Gate Valves on suction and discharge lines of juice pumps. THE CASE HISTORY Originally the Cr&ne valves were Installed on belt-driven pumps when the plant was built in 1003. In 1032, the old pumps were replaced. Nearly all the Crane valves were found in good condition and put right back In serv ice on the new pumps. It's no easy job these Crane 9 and 8-tnch, 125-pound brass-trimmed gate valves have been doing since 1903. The plant operates on fK^day continuous beet sugar cam paigns. a In spite of intermittent operation, and with peri odic routine maintenance only, the Crane valves never fail to operate freely, smoothly, and seat tightly. For 50 years they have assured dependable, positive flow control In event of pump failure--and they're still doing it. THE BETTER QUALITY...BtQQER VALUE UNE...IN BRASS, STEEL, IRON CRANE VALVES CRAN8;CO., Gmirni Offices 936 S. Michigan Ate., Chicago 3, Illinois Bmncb*i and Wholttnlm Serving All Industrial Artmt VALVCS FITTINGS FIPS PLUMBING The Larsen-Hogue Company is one of many carefully selected shops, strategically located throughout the United States, to service all types of electrical equipment built by Elliott Company. Together they comprise a trained and dependable service organisation which stands back of every Elliott motor and generator. In addition to these Approved Service Shops, is the staff of Elliott factory*troined Service Engineers, and the repair facilities which are available at the factory for regular or special service. For the location of the Elliott Approved Service Shop capable of handling your service job -- no matter what its site -- contact your nearest Elliott District Office or write Elliott Company, Ridgway Division, Ridgway, Pa.; or Elliott Company, Crocker*Wheeler Division, Ampere, N. J. ELLIOTT Compa*u| fl- RIDGWAY DIVISION CDOCKEJMVHEEIEff DIVISION