Document aBpmDz11rd1e5aB5JNKL63Nwa

JSNTATIVE SPECZ7ZCATIOM V of MONSANTO CHEMICAL COMPANY PHOSPHATE DIVISION PRODUCT Aroclor 1242'. , CODE NO. 1040*240-75-09 bATE CRAPE General Electrio Pyranol 1499AUTH0RIZED PROD. DEPT. NO. A APPROVED BY} \L 27 G *E Sp60 SUPERSEDES Desired Color, APHA Scale 100 max. Condition Clear Specific Gravity at 25/15*5C 1.378-1.388 Acidity, mg. K0H/g 0.014 max Inorganic Chlorides, ppm 0.10 max Saybolt Viscosity at 37*8C, Uni- versal sec. 78-88 Dielectric Constant at 100C 4.7-4.9 Resistivity at 100C., ohms -craH at 500 V DC 500 X 109 Refractive Index at 25C I.6245-I.6265 Distillation Range (Corrected)C 325-360 10% 50# 90* Pour Point C -14 max Water, ppm 35 max Corrosion: Loss of Aluminum 8 -ox Pyranol heated 6 hrs. C 210C / 1(30 Pyranol should meet the following spec.: Color, APHA Acidity mg KOK/g Inorganic Chlorides, ppm Condition Color, APHA Dielectric Strength at 75C Impregnation Test 150 max .014 0.1 max Clear 150 max Not determined Not determined Typical Value ^ *same steame Same sime *sar$ isame Same Same Same Same *Not determined Not determined *Not determined *Sarae *Same None \ \ 4 Same Same Same Same Same 35 KV min. R-273A, capacitors shall be vacuum dried at 100C for 72 hours and shall be Impregnated with the material as received from the Monsario Chemical Company. The requirements are* Power Factor Power Factor Fixed Chlorine, % Cl 25C 75C 00..3325*yo 41.5-42.5 Flgsh Point, Cleveland open cup 160C rain. Dielectric Constant - 25C 5.70-5.90 $> Loss on evaporation 100C - 6 hrs 0.4 max. Specific Heat at 25C 0.29 Five Point C min. to boiling point Sulfates None DSW 550792 STLCOPCB4089209