Document aBozyJrvNdR4qzVYroO4jmoR

Introduction Ih IS index contains information on chemicals and allied products manufactured and sold by E. I. d u Po n t &d e Ne mo u r s Co mp a n y (In c .) and its subsidiaries. The purpose of this index is to provide a convenient source of information on the properties, uses and other data for Du Pont products, where it was found practical to include such material. Descriptions of products are limited to the bare essentials. For more detailed information, contact main or branch offices of the departments, divisions or sub sidiaries which market the products. The addresses of these offices are given in the white section at the introduction for each department, division and subsidiary. This INDEX contains five sections which arc: PAGE DEPARTMENTAL SECTION (white pages)............................................... 1 Here descriptions of products are classified under their respective depart ment, division or subsidiary. Addresses of offices and plants appear at the introduction for each department, division and subsidiary. TRADEMARK SECTION (green pages)................................................... 85 A major portion of Du Pont trademarks are listed in alphabetical order. Each trademark is followed by the generic name of the product to which it is applied and the department or subsidiary by which it is marketed. ALPHABETICAL SECTION (yellow pages)............................................ 93 The names of Du Pont products are listed in alphabetical order. The page number after each product refers to the page in the white section carry ing the description of the product under the department or subsidiary by which it is marketed. INDUSTRIES SECTION (pink pages).......................................................117 Use of a majority of Du Pont products are classified under 18 major industries. The page number after each listing refers to the page in the Index carrying further information about the listing. GEOGRAPHICAL SECTION (blue pages)............................................. 141 Geographical section which shows locations of domestic and foreign offices, affiliated companies, plants and certain stuck points. II DUP210010630 DEPARTMENTAL SECTION Operating Units and Subsidiaries Elastomer Chemicals Department.............. 1 Accelerators for Natural and Synthetic Rubbers......................................................... 1 Antioxidants and Chemicals for Natural and Synthetic Rubbers..................................... 2 Colors for Rubber............................................ 3 Synthetic Rubbers........................................... 4 Electrochemicals Department............. 6 Ceramic Products............................................. 6 Chlorine Products.................................................. 7 Electroplating Products................................... 8 Formaldehyde Products.................................. 9 Furan Products................................................. 10 Peroxygen Products.......................................... 10 Sodium and Cyanide Products........................ 11 Vinyl Products.................................................. 12 Explosives Department.................................13 Blasting Supplies and Accessories................... 13 Explosives.......................................................... 15 Blasting Agents................................................. 16 Chemical Sales Section..................................... 17 Smokeless Powders....................................18 Fabrics and Finishes Department...............19 Fabrics Division................................................ L9 Finishes Division...............................................21 Automotive Finishes................................. 21 Automotive Reiinishing Materials........... 24 Industrial Finishes.................................... 27 "7" Specialties Sales................................. 30 Trade Sales Finishes................................. 32 Grasselli Chemicals Department................ 41 Industrial Chemicals........................................ 41 Biological Chemicals.........................................50 Organic Chemicals Department................. 55 Dyes and Chemicals Division....................... 55 "Freon" Products Division............................. 60 Petroleum Chemicals Division.........................62 Photo Products Department......................... 64 Motion Picture Products..................................64 Radiographic Products.....................................65 Industrial Products...........................................66 Trade Products.................................................68 Luminescent Chemical Products..................... 69 Pigments Department.................................... 70 Pigment Colors................................................. 70 Titanium Pigments...........................................71 Specialty Products............................................71 Polychemicals Department.......................... 72 Chemicals Sales Division..................................72 Plasties Sales Division......................................75 Plastics Products Division............................... 77 Remington Arms Company, Inc.................78 Peters Cartridge Division................................ 81 Salvage and Reclamation Division...........83 Film Department.............................................38 Textile Fibers Department...................... .84 III DUP210010631 Abbreviations atm......................................................... atmosphere bbl...........................................................barrel =Be............................................................degrees Baurne B. P........................................................ boiling point C ............................................................. degrees Centigrade cc.............................................................cubic centimeter cm........................................................... centimeter C. P........................................................ Chemically Pure cu. ft....................................................... cubic foot dia........................................................... diameter F ............................................................. degrees Fahrenheit fl. oz........................................................ fluid ounce F.P..........................................................freezing point ft............................................................. foot ft-lb......................................................... foot-pound g.............................................................. gram gal........................................................... gallon g/1........................................-........... .. . gram per liter g/ml........................................................ gram per milliliter in............................................................. inch 1............................................................... liter lb............................................................. pound max......................................................... maximum min.......................................................... minimum ml............................................................ milliliter mm.......................................................... millimeter M. P....................................................... melting point N. F....................................................... National Formulary No........................................................... number oz............................................................ ounce pt............................................................ pint qt............................................................ quart sec........................................................... second Sp.Gr. 1.5, 1.021, etc.............................specific gravity at 20C, referred to water at 4C. Sp.Gr. 1.625 (15/15C.), etc................ specific gravity at 15C. referred to water at 15C. sq. ft.................................................... . .square foot sq. in....................................................... square inch temp.................................................. .. . .temperature U.S.P...................................................... United States Pharmacopoeia wt............................................................ weight yd............................................................ yard Advertising Department, January 1959 DUP210010632 ELASTOMER CHEMICALS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Akron 8, Ohio Atlanta 3, Georgia Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 3, Illinois Detroit 35, Michigan Houston 6, Texas Los Angeles 58, California Palo Alto, California Trenton 8, New Jersey 40 East Buchtel Avenue at High Street 1261 Spring Street, N. W. 140 Federal Street 427 West Fourth Street 7 South Dearborn Street 13000 West Seven Mile Road 2601A West Grove Lane 2930 East 44th Street 701 Welch Road 1750 Olden Avenue PLANTS: Beaumont, Texas Carneys Point, New Jersey Louisville, Kentucky Montague, Michigan TELEPHONE PRospect 4-1000 POrtage 2-8461 TRinity 5-5391 HAncock 6-1711 FRanklin 5-5561 ANdover 3-7000 UNiversity 4-1963 MOhawk 7-7429 LUdlow 2-6464 DAvenport 6-7550 EXport 3-7141 PRODUCTS ACCELERATORS FOR NATURAL AND SYNTHETIC RUBBERS "808'' Rubber Accelerator: Butyraldehyde-aniline con densation product. Amber liquid; Sp. Gr. 0.98. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber, especially for hard rubber. CONTAINERS: 250-lb. drums. "833" Rubber Accelerator: Butyraldehyde-monobutylamine condensation product. Reddish-amber liquid; Sp. Gr. 0.86. Us e; To accelerate and improve the vulcanization of natural and synthetic rubber, especially for neoprene cements. Co n t ain er s : 225-lb. drums. "552" Rubber Latex Accelerator:Piperidinium pentamethylene dithiocarbamate011,(01 I,,),NC('S)SNH:-.(CK-),CH,. A cream colored crys talline powder; Sp. Gr. 1.20; melts with decomposition at not lower than 167C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds; as peptizer or plasticizer for neoprene. Co n t a in e r s : 125-lb. drums. MBT(2-Mercaptobenzothiazole)--CaH4SC(SH)N: Pale yellow powder; Sp. Gr. 1.50. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber and latex compounds. Co n t ain er s : 50-lb. bags. MBTS (2-Benzothiazolyl disulfide)--(C6H4SCN)aSa: Pale yellow powder or grains; Sp. Gr. 1.54. Us e: To accel erate and improve the vulcanization of natural and synthet ic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. NA-22(2-Mercaptoimidazoline)--CHaCHaNC(SH)NH: A white powder; Sp. Gr. 1.42; M. P. not lower than 195C. Us e: To accelerate and improve the vulcanization of -neoprene. CONTAINERS: 125-lb. drums. "Permalux" Neoprene Accelerator: Di-o-tolylguanidine salt of dicatechol borate -- (H0C8H40)2BN(NHC6H4CHa)a. Light grayish brown powder; Sp. Gr. 1.27; F. P. not lower than 165C. Us e: To accelerate and improve the vulcanization of neoprene. A nondiscoloring antioxidant for natural and synthetic rubbers. Co n t a in e r s : 125-lb. drums. "Tepidone" Rubber Accelerator: 47% water solution of sodium dibutyldithiocarbamate--(C.4HrXC.(S)SNVi. An amber liquid; Sp. Gr. 1.09. Us e: To accelerate and im prove the vulcanization of natural and synthetic rubber latex compounds. Co n t ain e r s : 125- and 440-lb. drums. "Tetrone" A Rubber Accelerator: Dipentamethylene thiuram tetrasulfide--[CHa(CHa)4NCS]aS4. Light gray powder; Sp. Gr. 1.48; M. P. not lower than 110C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. "Thionex" Rubber Accelerator: Tetramethylthiuram monosulfide--[(CH3)2NCS]2S. Lemon yellow powder or grains; Sp. Gr. 1.39; M. P. not lower than 105C. Us e: To accelerate the vulcanization of natural and synthetic rubbers. Co n t a in er s : 100-lb. drums. Thiuram E Rubber Accelerator: Tetraethylthiuram disulfide--[(CaH5)2NCS]aS2. White powder or grains; Sp. Gr. 1.30; M. P. not lower than 66C. Us e : To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 100-lb. drums. Thiuram M Rubber Accelerator: Tetramethylthiuram disulfide--[(CH3)2NCS]aSa. White powder or grains; Sp. Gr. 1.41; M. P. not lower than 141C. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t ain e r s : 100-lb. drums. DUP210010633 ELASTOMER CHEMICALS DEPARTMENT ANTIOXIDANTS, CHEMICALS "Zenite" Rubber Accelerator: 90% zinc salt of 2mercaptobenzothiazole--fCsKUSC^NjaZn, and 10% inert hydrocarbon. Alight cream colored, waxy powder; Sp. Gr. 1.53. Us e: To accelerate and improve vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. "Zenite" Special--Rubber Accelerator: Zinc salt of 2-mercaptobenzothiazole (See "Zenite", this page, above). A light-cream colored powder: Sp. Gr. 1.68. Us e: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. Co n t a in e r s : 50-lb. bags. ANTIOXIDANTS FOR NATURAL AND SYNTHETIC RUBBER "Akroflex" C Rubber Antioxidant: 35% diphenylparaphenylenediamine--CeH^NHCeHs^, and 65% phenylalpha-naphthylamine (See "Neozone" A, below). Dark gray waxy pellets; Sp. Gr. 1.23; F. P. not lower than 75C. Us e: To improve the aging and service life of natural and synthetic rubbers; anti-crosslinking agent for SBR (styrene butadiene rubber). Co n t ain e r s : 250-lb. drums. "Akroflex" CD Rubber Antioxidant: 35% diphenylpara-phenylenediamine (See "Akroflex" C, above), and 65% phenyl-beta-naphthylamine (See "Neozone" D, be low). Dark gray pellets; Sp. Gr. 1.22. Us e: To improve the aging and service life of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. "Antox" Rubber Antioxidant: Condensation product of butyraldehyde-aniline. Amber liquid; Sp. Gr. 1.04. Us e: To improve the aging and service life of natural and syn thetic rubbers. Co n t ain e r s : 275-lb. drums. "Neozone" A Rubber Antioxidant: Phenyl-alphanaphthylamine--CioHjNHCeHs. Yellow pellets which turn dark purple on exposure to air or light; Sp. Gr. 1.22; F. P. not lower than 50C. Us e: To improve the aging and service life of natural and synthetic rubbers. Co n t a in er s : 250-lb. drums. "Neozone" D Rubber Antioxidant: Phenyl-beta-naphthylamine--CioHjNHCeHs. Fine light gray powder; Sp. Gr. 1.24; F. P. not lower than 106C. Us e: To improve the aging and service life of natural and synthetic rubbers; stabilizer in manufacture of SBR. Co n t ain e r s : 160-lb. drums. "Permalux" Rubber Antioxidant: Di-o-tolylguanidine salt of dicatechol borate -- (HOCsH40)2BN(NHC6HiCH3)2. Light grayish brown powder; Sp. Gr. 1.27; F. P. not lower than 165C. Us e: To improve the aging and service life of natural and synthetic rubbers. Does not stain or discolor on exposure to sunlight. Co n t a in e r s : 125-lb. drums. "Thermoflex" A Rubber Antioxidant: 25% di-paramethoxydiphenylamine--(CHsOCsfL^NH, 25% diphenyl-para-phenylenediamine--C6H4(NHC6H5)3, and 50% phenyl-beta-naphthylamine--C10H4NHC6HS. Dark gray pellets; Sp. Gr. 1.21; F. P. hot lower than 67C. Us e: Promote outstanding heat aging and flex life of natural and synthetic rubbers. Co n t a in e r s : 250-lb. drums. "Zalba" Rubber Antioxidant: A hindered phenol. Amber colored viscous liquid; Sp. Gr. 0.94. Us e: To im prove aging and service life of natural and synthetic rubbers. Excellent nondiscoloring antioxidant for natural and synthetic rubbers and latex. A stabilizer for the manu facture of SBR. Co n t a in er s : 50-lb. drums. MISCELLANEOUS CHEMICALS FOR NATURAL AND SYNTHETIC RUBBER "Aquarex" D Surface Active or Mold Release Agent: Sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives of the type RS04Na. White powder; Sp. Gr. 1.33, Us e: To improve the stability of latex mixtures and to prevent coagulation due to mechanical friction; in water solution as a mold lubricant. Co n t a in e r s : 50-lb. bags. "Aquarex" G Surface Active Agent: Water solution of sodium alkyl sulfonate of the type RS03Na. Clear amber liquid; Sp. Gr. 1.09. Us e: In emulsion polymeri zation of synthetic elastomers and resins. Co n t ain e r s : 450-lb. drums. "Aquarex" L Mold Release Agent: Ammonium salts of alkyl acid phosphates of the type RHPOaONH4. Amber viscous paste; Sp. Gr. 1.01. Us e: As a corrosion inhibiting mold lubricant. Co n t a in e r s : 400-lb. drums. `'Aquarex" MDL Surface Active or Mold Release Agent: Water paste of sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D, above). Amber paste; Sp. Gr. 1.08. Us e: A stabilizing and wetting agent for latex mixtures; in water solution as a mold lubricant. Co n t a in e r s : 375-lb. drums. "Aquarex" ME Surface Active or Mold Release Agent: Sodium salts of sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D, above). Creamy white powder; Sp. Gr. 1.06. Us e: A stabilizing and wetting agent for latex mixtures and in water solution as a mold lubricant. Co n t a in er s : 50-lb. bags. "Aquarex" NS Surface Active Agent: Water solution of C-cetyl-betaine--(CH3)3N+CH(Ci6H33)COO~. Brown slightly cloudy liquid; Sp. Gr. 1.05. Us e: As a stabilizer for latex mixtures. Due to its amphoteric properties, it functions as a stabilizer in both acid and alkaline dis persions. Co n t a in e r s : 450-lb. drums. "Aquarex" SMO Surface Active Agent: 33% Water solution of mono-sodium salt of sulfated methyl oleate-- CH3(CH2)8CH(S04Na)(CH2)7C00CH:i. Reddish amber liquid; Sp. Gr. 1.08. Us e: A surface conditioning agent for rubber latex and neoprene latex mixtures. Co n t a in e r s : 450-lb. drums. "Aquarex" WAQ Surface Active or Mold Release Agent: A water solution of the sodium salts of the sulfate mono-esters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See "Aquarex" D). Amber viscous liquid; Sp. Gr. 1.04. Us e: A stabilizing and wetting agent for latex mixtures; diluted, as a mold lubricant. Co n t a in e r s : 400-lb. drums. Copper Inhibitor 65: 65% disalicylalpropylenediamine --H0C6H4CHNCH2CH(CH3)NCHC8H40H, and' 35% aromatic solvent. Amber colored liquid; Sp. Gr. 1.03. Us e: DUP210010634 ELASTOMER CHEMICALS DEPARTMENT MISCELLANEOUS CHEMICALS To prevent catalytic action of copper on oxidation of natural and synthetic rubbers. Co n t ain e r s : 250-lb. drums. ELA--Elastomer Lubricating Agent: Mixture of phos phate esters. Light amber liquid; Sp. Gr. 0.99. Us e: A lubricant for unvulcanized natural and synthetic rubber compositions. Co n t a in e r s : 425-lb. drums. "Endor" Rubber Peptizing Agent: Activated zinc salt of pentachiorothiophenoi--(CeCUSH^Zn, and 80% inert filler. Grayish green powder; Sp. Gr. 2.39. Us e: A peptizing agent for plasticizing natural rubber and all types of SBR (styrene butadiene rubber). Co n t a in er s : 100-lb. drums. "Heliozone" 1 nhibitor: Blend of selected waxy materials. Pale yellow to buff color, waxy flakes; Sp. Gr. 0.90. Us e: To retard sun checking and cracking of natural and synthetic rubbers. Co n t a in e r s : 150-lb. drums. "Hylene" M Organic Isocyanate: Methylene bis (4phenyl isocyanate)--(C3H4NCO)2CH2. Pale yellow lumps; Sp. Gr. 1.20. Us e: For making urethane adhesives and polymers. Co n t a in er s : 45- and 500-lb. drums. "Hylene" M-50 Organic Isocyanate: Methylene bis (4-phenyl isocyanate)--(C<sH4JSrCO)2CH2. 50% solution in monochlorobenzene; dark brown liquid; Sp. Gr. 1.16. Us e: In elastomer based adhesives. Co n t a in e r s : 45- and 500-lb. drums. "Hylene" MP Organic Isocyanate: Bis phenol adduct of methylene bis (4-phenyl isocyanate). Grayish white powder; water stable. Us e: A bonding agent and adhesive assistant for adhering "Dacron" polyester fiber to rubber compositions in water emulsion or latex systems. Co n t a in er s : 125-lb. drums. "Hylene" T Organic Isocyanate: Toluene-2,4-diiso cyanate--CH3C3H3(NCO)2. Water white to pale yellow liquid; Sp. Gr. 1.22. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t a in e r s : 45and 500-lb. drums. "Hylene" TIVI Organic Isocyanate: 80% toluene-2, 4-diisocyanate (See "Hylene" T) and 20% toluene-2, 6-diisocyanate--CH3CsH3(NCO)2. Sp. Gr. 1.22; water white to pale yellow liquid. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t a in e r s : 45- and 500-lb. drums. "Hylene" TM-65 Organic Isocyanate: 65% toluene 2,4-diisocyanate, and 35% toluene 2,6-diisocyanate (See "Hylene" TM). Sp. Gr. 1.22. Water white to pale yellow liquid. Us e: In manufacture of urethane foam, finishes, adhesives and rubbers. Co n t ain er s : 45- and 500-lb. drums. "Moca" Curing Agent for Urethane Synthetic Rub bers: Methylene-bis-orthochloroaniline. Tan colored, coarsely ground lumps; Sp. Gr. 1.39. Us e: Curing agent for "Adiprene" L urethane rubber, other urethane rubbers, and epoxy resins. Co n t ain er s : 50-lb. drums. NBC Sun or Ozone Cracking Inhibitor: Nickel dibutyldithiocarbamate--[(C4H9) aNC(S)S] 2Ni). Dark green flakes; Sp. Gr. 1.26; M. P. not lower than 86C. Us e: To prevent cracking due to ozone of SBR (styrene butadiene rubber) stocks. Will improve heat resistance and retard discoloration of neoprene compounds. Co n t a in e r s : 250-lb. drums. "Polyac" Butyl Rubber Conditioner: 25% poly-paradinitrosobenzene--[CeH4(NO)2]x--with an inert wax. Dark brown waxy pellets; Sp. Gr. 0.96. Us e: A processing aid and accelerator of vulcanization for butyl rubber. Co n t a in e r s : 100-lb. drums. Retarder W: Salicylic acid--HOC6H4COOH--with a dispersing agent. Buff colored, non-dusty powder; Sp. Gr. 1.43. Us e: To prevent premature curing of natural and synthetic rubbers; to activate blowing agents. Co n t a in e r s : 300-lb. drums. RPA No. 2 Rubber Peptizing Agent: 33Hs% 2-naphthalenethiol--C10H7SH, and 66?^% inert hydrocarbon. Light cream colored, waxy flakes; Sp. Gr. 0.92. Us e: As a peptizing agent for natural and SBR. Co n t ain e r s : 175-lb. drums. RPA No. 3 Rubber Peptizing Agent: 36.5% xylenethiols--(CH3)2C6H3SH, and 63.5% petroleum oil. Amber liquid; Sp. Gr. 0.91. Us e: As a peptizing agent for natural and SBR; a reclaiming agent. Co n t a in e r s : 400-lb. drums. RPA No. 3 Concentrated--Rubber Peptizing Agent: 71% xylencthiols--(CH3)2C6H3SII, and 29% petroleum oil. Dark amber liquid; Sp. Gr. 1.04. Us e: As a peptizing agent for natural and synthetic rubbers; as a rubber reclaiming agent. Co n t ain e r s : 450-lb. drums. RPA No. S Rubber Peptizing Agent: 90% pentachio rothiophenoi--CsCUSH, and 10% inert hydrocarbon. A light gray powder; Sp. Gr. 1.79. Us e: As a peptizing agent for natural and SBR. Co n t ain e r s : 125-lb. drums. RR-10 Reclaiming Chemical: Mixed dixylyl disulfides --[(CH3)2C3H3]2S2). Dark amber liquid; Sp. Gr. 1.05. Us e: An agent for accelerating devulcanization of natural rubber, SBR (styrene butadiene rubber) and mixed scrap during the reclaiming process. Co n t a in e r s : 450-lb. drums. "Unicel" ND Rubber Blowing Agent: 40% di-Nnitrosopentamethylene-tetramine -- NCH2N(NO)CH2N(CH2)CH2N(NO)CH2, and 60% in ert filler. Cream colored powder; Sp. Gr. 1.94. Us e: A nondiscoloring blowing agent for manufacture of natural or synthetic rubber sponge. Co n t a in e r s : 100-lb. drums. "Unicel" NDX Rubber Blowing Agent: 80% di-Nnitrosopentamethylene-tetramine--(See "Unicel" ND), and 20% inert filler. Cream colored spongy crumb; Sp. Gr. 1.40. Us e: A nondiscoloring blowing agent for natural or synthetic rubber sponge. Co n t a in e r s : 100-lb. drums. "Unicel" S Rubber Blowing Agent: 50% dispersion of finely divided sodium bicarbonate in oil. A cream colored, free flowing liquid; Sp. Gr. 1.30. Us e: Blowing agent for manufacture of natural or synthetic rubber sponge. Co n t a in er s ; 500-lb. drums. COLORS FOR RUBBER Rubber Dispersed Colors: Us e: For coloring natural and synthetic rubber compounds. Co n t ain e r s : 50-lb. drums. DUP210010635 ELASTOMER CHEMICALS DEPARTMENT SYNTHETIC RUBBERS SYNTHETIC RUBBERS "Adiprene" C Urethane Rubber: Reaction product of a diisocyanate and a polyalkylene ether glycol. Amber colored solid in stick form; Sp. Gr. 1.07. USE: A synthetic rubber for products that must have exceptional abrasion resistance, high tensile strength and low temperature brittle point. Co n t ain e r s : 50-lb. drums. "Adipfene" L Liquid Urethane Rubbers Reaction product of a diisocyanate and a polyalkylene ether glycol. Honey colored liquid; viscosity 14,000 to 19,000 cps at 30C.; Sp. Gr. 1.06. Us e: A fluid elastomer which can be converted into a tough elastic solid rubber having excellent resistance to abrasion, oxidation and ozone. Co n t a in e r s : 450-lb. drums. "Hypalon" 20 Synthetic Rubber--Chlorosulfonated Polyethylene: White chips; Sp. Gr. 1.10. Us e: An elasto mer for products which are oil resistant, unattacked by ozone, have excellent color stability and resistance to heat, weather and chemicals. Co n t a in e r s : 50-lb. bags. "Hypalon" 30 Synthetic Rubber--Chlorosulfonated Polyethylene: White chips; Sp. Gr. 1.3. Us e: A solution type material for protective and decorative coatings, a paint base. Coatings are resistant to weathering, ozone, many oils and chemicals. CONTAINERS: 50-lb. bags. Neoprene Latices: Water emulsions of polymerized 2-chlorobutadiene 1,3. White, milky liquid. Us e: For making dipped, impregnated and extruded products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in e r s : 55-gal. drums, 8000-gal. tank cars. Type 60--59% solids; Sp. Gr. 1.12. A concentrated latex; chiefly for foamed products. Type 571--50% solids; Sp. Gr. 1.10. General purpose use. Type 572--50% solids; Sp. Gr. 1.11. Special for adhesives; high wet strength. Type 601-A--59% solids; Sp. Gr. 1.12. A concentrated latex; general purpose use. Type 635--58% solids; Sp. Gr. 1.12. A concentrated latex. Used in blends with other neoprenes to improve wet gel strength of films. Also for paper pulp additive. Type 650--60% solids; Sp. Gr. 1.13. A concentrated form of Type 750. General purpose use where high solids are desired, particularly in dipped goods. Type 673--58% solids; Sp. Gr. 1.12. For use in adhesive cements. Forms quick strong bonds while wet. Permanent cured bonds retain high strength at elevated temperatures. Type 735--37.5% solids; Sp. Gr. 1.08. Used in blends with other neoprenes' to improve wet gel strength of films. Also for paper pulp addition. Type 736--34.5% solids; Sp. Gr. 1.06. Especially stabilized for paper pulp addition. Type 750--50% solids; Sp. Gr. 1.10. General purpose use, particularly in dipped goods where low modulus and ex cellent crystallization resistance is required. Type 842-A--50% solids; Sp. Gr. 1.10. Products made from this type do not stiffen at low temperatures. Type 950--50% solids; Sp. Gr. 1.10. A cationic latex; for treatment of fibrous materials. Neoprene Type AC: Polymer of 2-chlorobutadiene 1,3. Cream to light green chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength adhesive cements. Co n t a in e r s : 50-lb. bags. Neoprene Type AD: Polymer of 2-chlorobutadiene 1,3. Silvery white chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength, solvent type adhesive cements. Greater viscosity and color stability than Type AC. Co n t a in e r s : 50-Id . bags. Neoprene Type CG: Polymer of 2-chlorobutadiene 1,3. Amber to light green chips; Sp. Gr. 1.23. Us e: Chiefly for quick setting, high strength adhesive cements. Co n t a in e r s : 50-lb. bags. Neoprene Type FB: Polymer of 2-chlorobutadiene 1,3. Dark olive putty-like solid of very low molecular weight; Sp. Gr. 1.23. Us e: A vulcanizable plasticizer for neoprene and other synthetic elastomers; in cement applications which require a high solids to -viscosity ratio; useful in preparation of caulks and sealants. Co n t a in e r s : 50-lb. cartons. Neoprene Type GN: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: General purpose for products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in e r s : 50-lb. bags. Neoprene Type GN-A: Polymer of 2-chlorobutadiene 1,3 containing a discoloring antioxidant. Amber chips; Sp. Gr. 1.23. Us e: General purpose for products that must withstand action of oils, solvents, heat, oxidation and sunlight. Co n t a in er s : 50-lb. bags. Neoprene Type GRT: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: For general purpose stocks requiring retention of building tack and flexibility of uncured stocks. Vulcanizates have superior resistance to hardening due to elastomer crystallization. Co n t a in e r s : 50-lb. bags. Neoprene Type KNR: Polymer of 2-chlorobutadiene 1,3. Amber chips; Sp. Gr. 1.23. Us e: Chiefly in paints and putties, for lining tanks and chemical equipment. Co n t a in e r s : 50-lb. bags. Neoprene Type S: Polymer of 2-chlorobutadiene 1,3 containing a nondiscoloring antioxidant. Amber chips; Sp. Gr. 1.20. Us e: Chiefly in crepe soles thatresist softening and are resistant to oil and gasoline; as a stiffener for other neoprenes. Co n t a in e r s : 50-lb. bags. Neoprene Type W: Polymer of 2-chlorobutadiene 1,3. Silver gray to light amber chips; Sp. Gr. 1.23. Us e: General purpose neoprene having much greater storage stability, better processing characteristics and better color retention during cure than the "G" type neoprene. Does not contain sulfur or thiuram stabilizers. Co n t a in e r s : 50-lb. bags. Neoprene Type WB: Polymer of 2-chlorobutadiene 1,3. Silver gray to light amber chips; Sp. Gr. 1.23. Us e: For extruded goods where ultimate in surface appearance is required; highly desirable for calendered items which must be very smooth and resist shrinkage; similar to Type WX in crystallization resistance. Co n t a in e r s : 50-lb. bags. DUP210010636 ELASTOMER CHEMICALS DEPARTMENT SYNTHETIC RUBBERS Neoprene Type WHV: Polymer of 2-chlorobutadiene 1,3. Silver gray or light amber chips; Sp. Gr. 1.23. Us e: A Type W neoprene of high viscosity for use in compounds containing large amounts of fillers and oils. Can be used as a stiffener for other neoprenes. Co n t ain e r s : 50-lb. bags. Neoprene Type WRT: Polymer of 2-chlorobutadiene 1,3. Silver gray or light amber chips; Sp. Gr. 1.25. Us e: General purpose neoprene having superior resistance to hardening due to elastomer crystallization. Kas excellent storage stability, processing properties and wide latitude in compounding. Co n t a in er s : 50-lb. bags. Neoprene Type WX: Polymer of 2-chlorobutadiene 1,3. Silver gray to light amber chips; Sp. Gr. 1.24. Us e: General purpose neoprene having better resistance to stiffening due to crystallization than Type W. Has ex cellent storage stability, processing properties and wide latitude in compounding. Co n t a in e r s : 50-lb. bags. "Viton" A Synthetic Rubber: Copolymer of hexafluoropropylene and vinylidene fluoride. White trans lucent solid; Sp. Gr. 1.82. Us e: For rubber products that must withstand unusually high temperatures up to 600F. in air, chemicals or most liquids. Co n t a in e r s : 50-lb. drums. "Viton" A-HV Synthetic Rubber: Copolymer of hexafluoropropylene and vinylidene fluoride. White translucent solid; Sp. Gr. 1.82. Us e: A type of "Viton" A with high viscosity for rubber products that must withstand un usually high temperatures up to 600F. in air, chemicals or most liquids. Co n t ain e r s : 50-lb. drums. DUP210010637 ELECTROCHEMSCALS DEPARTMENT GENERAL OFFICE: DuPont Building Wilmington 98, Delaware DISTRICT AND SALES OFFICES: Baltimore 2, Maryland Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 46, Illinois Cincinnati 2, Ohio Cleveland 20, Ohio Detroit 35, Michigan *Kansas City 20, Missouri Los Angeles, California New York 1, New York Philadelphia, Pennsylvania San Francisco 4, California 321 Fallsway 140 Federal Street 427 West Fourth Street 7250 North Cicero Avenue, Lincolnwood 2412 Carew Tower 11900 Shaker Boulevard 13000 West Seven Mile Road Guinotte and Michigan Avenues Post Office Box 70, El Monte, California 350 Fifth Avenue 308 East Lancaster Avenue, Wynnewood, Penna. Ill Sutter Street *Barada Bo Page, Inc., with Branch Offices in: Corpus Christi, Dallas, Fort Worth, Houston, and Odessa, Texas; New Orleans and Baton Rouge, Louisiana; Tulsa and Oklahoma City, Oklahoma; and Wichita, Kansas. t el eph o ne PRospect 4-1000 PLaza 2-2862 HAncock 6-1711 FRanklin 5-5561 INdependence 3-7250 PArkway 1-5253 LOngacre 1-1580 UNiversity 4-1963 Victor 2-6240 Cumberland 3-2761 LOngacre 3-6440 TRinity 8-2700 EXbrook 2-1158 PLANTS: Dresden, New York Memphis, Tennessee Niagara Falls, New York Perth Amboy, New Jersey Toledo, Ohio Wyandotte, Michigan EXPORT DIVISION: DuPont Building Wilmington 98, Delaware PRospect 4-1000 PRODUCTS In d ic a t e s Re s a l e Pr o d u c t s CERAMIC PRODUCTS CONDUCTIVE SILVER COATINGS CERAMIC COLORS Glass Enamels: A series of finely ground fluxes, basically lead borosilicate, intimately blended with colored ceramic pigments. Full range of colors available in paste (mixture of enamel with air drying or thermofluid squeegee medium) or dry form. Different grades give characteristics of acid resistance, alkali resistance, sulfide resistance, or low lead release to meet requirements for various uses. Firing range 1000-1400F. (537.8-760C.). Us e: For fired-on labels and decorations on glassware, tumblers, milk bottles, beverage bottles, glass containers, illuminating ware, archi tectural glass and signs. CONTAINERS: Dry colors, 25-, 50-, 100-, and 200-lb. fiber drums; paste colors, 100-lb. (5-gal.) steel pails; thermofluid enamels, 200-lb. (20-gal.) steel drums, 50-lb. (5-gal.) steel pails. Gold Colors: Finely ground mixtures of low melting glasses and gold base pigments suitable for use over all standard glazes. Firing range l300-1500F. (704.4815.6C.); Cones 018-014. Us e: Same as Overglaze Colors, below. Co n t a in e r s : Under 25 lb., tin cans; 25 lb. or more, 25-lb. (3-gal.) fiber drums. Overglaze Colors: Finely ground mixtures of pigments and low melting glasses suitable for use over standard glazes. A complete line of detergent resistant colors for silk or metal screen application. Temperature range 13001500F. (704.4-815.6C.); Cones 018-014. Us e: For hands, decalcomania, and similar decorative designs fired on china, pottery, terra cotta, tile, and other glazed ceramic surfaces. Co n t a in e r s : 25-, 100-, and 200-lb. fiber drums. Conductive Coating Materials: Specially compounded materials containing silver powder in a suitable vehicle, with or without ceramic flux; can be coated on base ma terials such as titanate bodies, mica, glass, porcelain, steatite, plastics, wood, cloth, and paper by stencil screen ing (squeegee), spraying, dipping, brushing, roller coating, banding wheel, or other suitable method. Types for air drying, baking at low temperatures, and firing at elevated temperatures. Us e: To produce capacitor electrodes, cer amic to metal solder seals, electrical shields, surfaces of high conductivity on nonconductive materials; as a base for electroplating on ceramic and nonceramic surfaces. Co n t ain e r s : Paste, qt. and gal. cans; liquid, pt. and gal. bottles. Silver Powder--Ag: Finely divided silver powder, 99+% silver; with or without added flux. Us e: Preparation of Conductive Coating Materials (above). Co n t ain e r s : 5-o z. bottles; qt. and gal. cans. FLUXES (FRITS) Fluxes: Low melting glasses. Firing temperatures 9501300F. (510-704.4C.). Us e: To lower fusing tempera tures of refractory materials; as a base vehicle for vitreous decorative coatings for glass, pottery, chinaware, etc. Co n t ain e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Porcelain for Aluminum: Vitreous frits which fire at 970-1000F. (521.1-537.8C.) for use on aluminum alloys. Enamels have excellent resistance to impact, chemical attack, thermal shock, and salt water corrosion. Us e: For DUP210010638 ELECTROCHEMiCALS DEPARTMENT CERAMIC PRODUCTS imparting chemical resistance, dielectric strength, and color to aluminum alloys. CONTAINERS: 25-, 50-, 100-, and 200-lb. fiber drums. LUSTERS Luster Colors: Liquids containing resinates or similar organic compounds of various base or precious metals. Us e: For decorating pottery, glass, tile, china, terra cotta, and similar ceramic surfaces with fired-cn iridescent coat ings or designs. Co n t a in er s : Precious metal lusters, 500-g. (1-lb.) bottles; base metal lusters, gal. (7-lb.) bottles. MEDIA AND THINNERS Squeegee Media (Squeegee Oils): Specially compounded organic vehicles for paste colors applied by stencil screen. Stay open on the screen with fast drying on the ware. Dry to tough film, allowing superimposition of colors without intermediate firing. Burn clean with minimum residue. Us e: As vehicles for paste colors for stencil application on glassware, tumblers, bottles, porcelain enamel, pottery, etc. Co n t a in e r s : 55-gal. steel drums. Thinners: Essential oils and mixtures thereof for use with precious metal preparations. Us e: Thinning and ex tending precious metal preparations used in decorating ceramicware. Co n t ain e r s : Lb. bottles. PIGMENTS Body Stains: Finely ground calcined oxide pigments for coloring ceramic bodies. Us e : As colors or designs for tile, terra cotta, chinaware, etc., where the pigment becomes part of the ceramic body. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Enamel Pigments: Finely ground calcined oxide mix tures. Maximum firing temperature 1600F. (871.1C.). Us e : For coloring vitreous enamels for application on sheet steel, cast iron, or aluminum; in the manufacture of Over glaze Colors and Glass Enamels. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Glaze Stains: Finely ground calcined oxides for use in coloring ceramic glazes. Us e: Coloring glaze coatings for pottery, tile, terra cotta, and similar ceramicware. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Pigments for Plastics: Finely ground calcined oxides having good color stability to light and temperature. Us e: For coloring nylon, paper, and plastics where special sta bility is desirable. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. Underglaze Pigments: Finely ground calcined oxides for colored designs beneath the glaze on ceramic surfaces. Us e: For coloring or decorating pottery, tile, terra cotta, and similar unglazed ceramic surfaces. Co n t a in e r s : 25-, 50-, 100-, and 200-lb. fiber drums. PRECIOUS METAL PREPARATIONS Brown Gold (Gold Powders)--Au: Finely divided, dry preparations containing gold (99+% pure), usually a flux, and possibly diluents. For dry application by dusting on a tacky surface which has been printed, sprayed, or brushed onto decalcomania or directly on the ware surface. Fire at 1365F. (740.5C.) to matt surface. Produce heavy gold deposits which have good stability and long-wearing quali ties. Us e: Decorating china, pottery, tile, etc., with fired-on gold designs; for increasing gold content of other gold prepa rations. Co n t ain e r s : 1-, 10-, 25-, 50-, and 100-oz. jars. Burnish Golds: Finely divided gold powder combined with suitable fluxes and incorporated into low viscosity vehicles suitable for brush application. Produce heavy, stable, long-wearing gold deposits. Fire to a matt surface; exture de ed by ->1cVl?TT agate or burnishing sand. Platinum or silver can be added to whiten or impart a green cast to the deposit. Us e: Deco rating high grade china and ceramicware with fired-on gold designs. Co n t a in e r s : 1-, 10-, 25-, 50-, and 100-oz. jars. Liquid Bright Golds: Liquid compositions of metal resinate, flux, and low viscosity, low boiling vehicle. Suitable for application by brushing, stamping, spraying, or stenciling (squeegee). Fire to a bright mirror surface. Us e: Decorating pottery, glass, tile, terra cotta, enameled metals, etc., with fired-on, bright gold designs. CONTAIN ERS: 100- and 500-g. bottles. * Liquid Bright Palladiums or Platinums: Liquid com positions of metal resinate, flux, and low viscosity, low boiling vehicle. Suitable for application by brushing, stamping, spraying, or stenciling (squeegee). Fire to a silvery mirror surface. Us e: Decorating pottery, glass, tile, terra cotta, enameled metals, etc., with fired-on, bright silvery designs. Co n t a in e r s : 100- and 500-g. bottles. Paste Golds: Heavy compositions of powdered gold, suitable flux, and high viscosity medium. Suitable for printing by tissue transfer method or can be diluted for brush application. Fire to matt surface which is burnished to develop true gold texture. Us e: Decorating high grade chinaware and other ceramic surfaces with gold designs; for decorating ceramicware with encrusted or Roman gold designs. Co n t ain er s : 1-, 10-, 25-, 50-, and 100-oz. jars. CHLORINE PRODUCTS "Artie" Methyl Chloride: (See Methyl Chloride, below.) Chloroform (Trichloromethane)--CHCI3: A colorless, sweet smelling liquid; soluble in alcohol and ether; slightly soluble in water. Available in Technical Grade. Boiling range 140.7-142.5F. (60.4-61.4C.). Weight per gal. 12.43 lb. at 20C. Us e: As a solvent for fats, oils, and other organic compounds; for spotting textiles; as a freezing point depressant for fire extinguisher fluids; in manufacture of dyes and pharmaceuticals. Co n t a in e r s : 55-gal. drums (660-lb.); tank cars. Methyl Chloride (Chloromethane, Monochloromethane)--CH3CI: At ordinary temperatures a colorless gas with ethereal odor; slightly soluble in water; soluble in most organic solvents; stable; moderately flammable; high latent heat and other physical properties desirable in re frigerants. Available in Refrigeration Grade and Technical Grade. Boiling range --12.3 to --10.5F. (--24.6 to --23.6C.). Weight per gal. 7.68 lb. at 20C. Re f r ig e r a t io n Gr a d e ("Ar t ic " Me t h y l Ch l o r id e ); Us e : As a refrigerant; as a fluid for thermometric and thermostatic equipment. Co n t a in e r s : 70-, 100-, 145-, and 300-lb. cylinders; multiunit tank cars of 15 (1,300 lb. each) tanks. DUP210010639 ELECTROCHEMICALS DEPARTMENT CHLORINE PRODUCTS Methyl Chloride (Continued) Te c h n ic al Gr a d e: Us e : As a methylating agent in organic synthesis; as a low temperature solvent; as a solvent and propellent in aerosols. Co n t a in e r s : 100-lb. cylinders; multiunit tank cars of 15 (1,300 lb. each) tanks; single unit tank cars. Methylene Chloride (Dichloromethane, Methylene Dichloride)--CH2CI2: A colorless liquid with faintly ethereal odor; practically nonflammable and nonexplo sive. Available in Refrigeration Grade for both solvent and refrigerant uses. Boiling range 103.1-104.5F. (39.540.3C.). Weight per gal. 11.07 lb. at 20C. Us e: As a refrigerant in centrifugal compressors; for chemical syn thesis; as a low temperature heat transfer liquid; as a paint remover; as a cold cleaner; as a solvent for animal and vegetable oil extraction; as a solvent in aerosols; for de waxing of lubricating oils; and as a solvent for cellulose acetates. Co n t a in er s : 55-gal. drums (600-lb.); tank trucks; tank cars. Perchlorethylene(Tetrachloroethylene)--C2CI4: Clear, colorless liquid with ethereal odor; practically in soluble in water; soluble in alcohol and ether; nonflam mable and nonexplosive; stable in the presence of moisture. Available in Dry Cleaning Grade and Technical Grade. Boiling range 248.9-251.6F. (120.5-122.0C.). Weight per gal. 13.55 lb. at 20C. Us e: Spotting and dry cleaning fluid; textile cleaning; vapor degreasing solvent; cold cleaner; drying agent for metals and other solids; vermi fuge; as a solvent for rubber, waxes, tar, paraffin, and gums; as a heat transfer medium; for chemical synthesis. Co n t a in e r s : 55-gal. drums (700-lb.); tank trucks; tank cars. "Perclene" Perchlorethylene: (See Perchlorethylene, above.) Tetrachloroeihane (1,1,2,2-Tetrachloroethane, Acet ylene Tetrachloride)--CzHsCI4: A clear, very slightly yellowish, heavy liquid; soluble in alcohol and ether; non flammable and nonexplosive; unstable in the presence of moisture; vapors' toxic. B. P. approximately 295.3F. (146.3C.). Weight per gal. 13.32 lb. at 20C. Us e: As a solvent in special preparations; in chemical synthesis. Co n t ain e r s : 55-gal. drums (700-lb.). Trichlorethylene--C2HCI3: Clear, colorless liquid with ethereal odor; miscible with alcohol, ether, and most organic solvents; practically insoluble in. water; stable in the presence of moisture; practically nonflammable and nonexplosive. Available in four grades. Co n t a in e r s : 55-gal. drums (660-lb.); tank trucks; tank cars. Te c h n ic a l a n d Dr y Cl e a n in g Gr a d e ("Tr ic l e n e " Tr ic h l o r e t h y l e n e ): Boiling range 187.9-190.4 F. (86.6-88.0C.). Weight per gal. 12.19 lb. at 20C. Us e: Dry cleaning and spotting fluid; textile cleaning; solvent for adhesives and waxes; asphaltic paint thinner and remover; for coating paper; organic reagent. Me t a l De g r e a s in g Gr a d e ("Tr ic l e n e " D Tr ic h l o r e t h y l en e): Boiling range 187.5-190.2F. (86.4-87.9 C.). Weight per gal. 12.16 lb. at 20C. Us e: Specifically stabilized for vapor degreasing ofmetals; low temperature heat transfer liquid. Ex t r a c t io n Gr a d e : Boiling range 187.7-189.5F. (86.5-87.5C.). Weight per gal. 12.23 lb. at 20C. Us e: Extraction solvent for many waxes, resins, and alkaloids. 8 Trichlorethylene (Continued) Fr e ez in g -p o in t De p r es s a n t Gr a d e : Weight per gal. 12.21 lb. at 20C. Us e: Freezing-point depressant for fire extinguisher fluids. "Triclene" Trichlorethylene: (See Trichlorethylene, this page.) ELECTROPLATING PRODUCTS Addition Agent 774: Pale amber, slightly viscous water solution of organic wetting agents; faint amine odor; mildly alkaline. Us e: As antipitting agent with "Coppralyte" plating salts; as antifume agent with "Durobrite" zinc plating. Co n t a in e r s : 9-lb. bottles (1-gal.), 125-lb. fiber drums. "Cadalyte" Bright Dip: Clear colorless liquid; corrosive; miscible with water. Diluted with 15-30 parts of water for dipping solution. Us e: To brighten cadmium deposits by "bright dipping;" to add a tarnish-resistant film on surface of cadmium plate. Co n t ain e r s : 5-lb. bottles, 120-lb. car boys. "Cadalyte" Brightener: Light brown, free flowing, fine powder; water soluble. Us e: In cyanide cadmium plating baths for maintaining high covering power of bath and brilliancy and uniformity of deposits. Co n t ain er s : 5-, 25-, and 50-lb. steel pails and fiber containers. "Cadalyte" Maintenance Compound: Buff colored, free flowing, fine powder; water soluble. Contains "Cadalyte" Brightener and sodium cyanide in proportions consumed in cadmium plating. Us e: Replenishing "Cadalyte" cad mium plating baths. Co n t a in e r s : 100-lb. steel or fiber drums. "Cadalyte" Plating Salts: Reddish-brown powder con sisting of a mixture of sodium cyanide, cadmium oxide, and brighteners; contains approximately 19.2% cadmium. Free flowing, water soluble, stable. Us e : To prepare a cadmium plating bath which deposits cadmium in a bright, ductile, adherent form on iron and steel to prevent rusting and corrosion. Co n t a in e r s : 50-lb. steel or fiber drums. Carbonate Remover: Fine, white, free flowing powder. Slightly soluble in water. Us e: To remove carbonates from cyanide plating solutions. Co n t a in er s : 100-lb. bags. Copper Cyanide (Cuprous Cyanide)--Cu2(CN)2: A creamy white powder; insoluble in water; soluble in sodium cyanide and potassium cyanide solutions; copper content min. 70%; cyanogen content min. 28.5%. Us e: In copper and brass cyanide electroplating solutions. Co n t a in e r s : 25-, 50-, and 100-lb. fiber packages. Copper Plating Addition Agents: (See Addition Agent 774, "Coppralyte" Addition Agents 1085 and 1374, "Dacolyte" Addition Agent, and Elchem 1393 and Elchem 1396 Addition Agents.) "Coppralyte" Addition Agent 1085: Pale amber, slightly viscous water solution of organic wetting agents; faint amine odor; mildly alkaline. Us e : As antipitting agent for "Coppralyte" copper plating. Co n t ain er s : 9-lb. bottles (1-gal.), 125-lb. fiber drums. "Coppralyte" Addition Agent 1374: White powder containing an antimony salt; water soluble, slightly hygro scopic, stable. Us e : As a brightening agent in "Coppralyte" DUP210010640 ELECTROCHEMiCALS DEPARTMEN1 ELECTROPLATING PRODUCTS copper plating. Co n t a in er s : 25- and 100-lb. fiber con tainers. "Coppraiyte" Plating Salt--Potassium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 25.4%; free KCN min. 1.25%, max. 3.0%. Us e: For preparing copper plating baths for pro ducing smooth, bright, heavy, adherent coatings of copper on steel die castings, wire, and other parts. Co n t a in e r s : 95- 50" and lOQ-lfo. fifosr contsinsrs. "Coppralyte" Plating Salt--Sodium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 27.0%; free NaCN min. 0.4%, max. 2.0%. Us e: For preparing copper plating baths for produc ing smooth, bright, heavy, adherent coatings of copper on steel die castings, wire, and other parts. Co n t ain e r s : 25-, 50-, and 100-lb. fiber containers. "Cyanobrite" Mercury Salt: A red, powdered mercury salt; soluble in alkalies. Us e : As the mercury-carrying ingredient for cyanide zinc plating solutions. Co n t ain er s : 1-lb. cartons (5 in a case), 10-, 25-, 50-, and 100-lb. fiber containers. "Dacolyte" Addition Agent: Dark brown, amorphous, fine powder; sharp odor; water soluble. Us e: In acid copper plating solutions for heavy deposits only. Assists in pro ducing smooth copper deposits free from nodules or trees. Co n t a in e r s : 5-, 10-, 25-, and 50-lb. fiber containers. "Darsil" Oxidizing Agent: A fluffy white material; insoluble in water; soluble in concentrated hydrochloric acid solution. Us e: For oxidizing (black finish) silver, gold, and brass. Co n t a in e r s : 1-, 4-, 8-, 10-, and 16-oz. bottles. "Durobrite" Addition Agent 309: Clear amber liquid containing approximately 10% solids. Us e: Brightening agent for cyanide zinc plating. Improves covering power by extending the bright plating range to low current density areas. Co n t a in e r s : 40-lb. steel pails. Elchem 1393 Addition Agent: Grayish-white powder containing potassium cyanide and selenium; slightly hygro scopic, water soluble, stable. Us e : As a brightening agent in cyanide copper plating baths. Co n t a in e r s : 25- and 100-lb. fiber containers. Elchem 1396 Addition Agent: Dark amber liquid; mildly alkaline. Us e: As a brightener and antipitting agent in cyanide copper plating baths. Co n t a in e r s : 40-lb. pails and 450-lb. steel drums. Electropolishing Solution: A clear, dark amber, cor rosive liquid; glycolic acid-sulfuric acid formulation; acid content 85%; F. P. below 32F. (0C.) ; nonflammable and nonexplosive; miscible with water. Us e : In electropolishing stainless steel over a wide current density range. Co n t a in e r s : 162-lb. carboys. Halogen Tin Addition Agent 2 Special: Clear colorless liquid; miscible with water; stable. Us e: In Halogen Tin Plating Process for brightening and controlling deposit. Co n t a in e r s : 420-lb. stainless steel drums. Halogen Tin Plating Process: An acid tin plating process, using bivalent tin salts and tin anodes. Us e: For continuous tin plating on steel strip, and copper or steel wire. Bath permits high current densities and rapid plating. ' Polysulfide: A sodium sulfuret similar to Liver of Sulfur, having a sodium base instead of a potassium base. Yellow to yellow-green powder; sodium polysulfide content min. 56%; total sulfur min. 50.7%. Us e: For coloring copper and brass; for stripping copper plated deposits; for purify ing cyanide plating solutions. Co n t a in e r s : 60-lb. cases (six 10-lb. tins), 100-lb. drums. Potassium Cyanide: (See Page 12.) Sodium-Copper Cyanide Double Salt: White crystalline complex salt of copper cyanide and sodium cyanide. Us e: For preparing and maintaining cyanide copper plating baths based on sodium cyanide. Co n t ain e r s : 100-lb. fiber drums. Sodium Cyanide: (See Page 13.) *Sodium Stannate--Na?Sn03-3H20: A light brown, crystalline powder; soluble in water; tin content min. 40.5%. Us e: For electrotinning ferrous and nonferrous articles, such as refrigerating coils, food containers, radio and automotive parts; for delustering rayon; and in cross dyeing of rayon and cotton fabrics. Co n t ain e r s : 25-lb. metal cans, 100- and 300-lb. steel drums. Sodium Sulfocyanide: (SeePage 13.) Zinc Cyanide--Zn(CN)2: Stable white powder; soluble in alkalies, sodium and potassium cyanide solutions, and in dilute mineral acids with production of hydrogen cyan ide. Insoluble in water and alcohol; decomposes on heating. Zinc content min. 55%; cyanogen content min. 40%. Us e: In zinc and brass electroplating solutions; as a chemi cal reagent. Co n t a in e r s : 25-, 50-, and 100-lb. fiber con tainers. Zinc Plating Addition Agents: See "Durobrite" Addi tion Agent 309 and "Zin-O-Lyte" Addition Agent O. "Zin-O-Lyte" Addition Agent O: A heavy gray powder containing molybdenum; soluble in caustic soda solution; insoluble in water. Us e: In make up and maintenance of bright zinc plating baths prepared with "Zin-O-Lyte" salts. Co n t ain er s : 5-, 25-, and 50-lb. fiber containers. "Zin-O-Lyte" Brightcners: Organic addition agents; fine powder; water soluble. Us e: In zinc plating baths pre pared with "Zin-O-Lyte" salts to increase deposit bright ness and current efficiencies of the bath and widen the bright current density range. Co n t a in e r s : 5-, 10-, 25-, 50-, and 100-lb. fiber containers. "Zin-O-Lyte" Salts: Fine white powder containing sodium cyanide and other chemicals in proportions re quired for the "Zin-O-Lyte" zinc plating bath. Us e: In preparing "Zin-O-Lyte" zinc plating baths for still or barrel operation. Co n t ain er s : 100-lb. steel or fiber drums. FORMALDEHYDE PRODUCTS Formaldehyde Solution (Formalin)--CHsO: A clear, colorless, aqueous solution. Us e: In manufacture of phenolic and urea resins; in manufacture of casein plastics, dyes, chemicals for textile industry, and embalming fluids; in paper, leather, and cork products; as a disinfectant, deodorant, preservative; for treatment of seeds and soil; for chemical synthesis. DUP210010641 ELECTROCHEMICALS DEPARTMENT Formaldehyde Solution (Continued) Low Me t h an o l Gr a d es : 37% formaldehyde by weight, max. 1% methanol by weight; 45% and 50% formalde hyde by weight, max. 1% methanol by weight. Co n t a in e r s : 26,000- to 38,000-lb. tank trucks (within a 200-mile radius of Perth Amboy, New Jersey and Toledo, Ohio); 72,000-lb. tank cars. U. S. P. Gr a d e : 37% formaldehyde by weight, 6.5%15% methanol by weight. Co n t ain e r s : 25-ib. cases (ib. bottles); 100-lb. carboys; 90- and 475-lb. drums; 26,000to 38,000-lb. tank trucks (within a 200-mile radius of Perth Amboy, New Jersey and Toledo, Ohio); 72,000-lb. tank cars. Hexamethylenetetramine (Urotropin, Hexamine)-- (CH2)6N4: A white powder or granular solid; soluble in water, chloroform, and alcohol. At 263C. it sublimes without melting; on contact with fire, it readily ignites and burns with a smokeless flame. Us e: In manufacture of phenolic molding resins, cork products, rubber accelerators, and pharmaceuticals; in chemical synthesis; for hardening casein, glue, and other proteins. CONTAINERS: 50-lb. multi wall bags; 150- and 200-lb. fiber drums. Te c h n ic al Gr a d e: Granular and powder forms. Con tains 0.3% max. ash and 0.3% max. moisture. Te c h n ic a l Gr a d e FF: Granular FF contains 0.2%0.4% anticaking agent; 0.7% max. ash and 0.3% max. moisture. Powder FF contains 2.25%-3.75% anticaking agent; 3.5% max. ash and 0.3% max. moisture. Paraformaldehyde (Paraform, Trioxymethylene)-- (CH20)x =H20s A white powder or granular solid; slowly soluble in water and alcohol; evolves formaldehyde gas when heated; CH20 content min. 95%. Us e: In manufac ture of synthetic resins, pharmaceuticals, and cork prod ucts; for hardening casein and glue; as a germicide, fungicide, deodorant; for fumigation. Co n t a in e r s : 50-lb. multiwall bags; 100-, 125-, 250-, and 300-lb. fiber drums. FURAN PRODUCTS 1,4-Dichlorobutane (Tetramethylene Chloride, DCB) --CI(CH2)4CI:A colorless liquid with mild, pleasant odor; miscible with most organic solvents; practically insoluble in water. Boiling range 307.4-312.8F. (153-156C.); F. P. --35.1F. (--37.3C.); flash point (TAG Closed Cup) 104F. (40C.); Sp. Gr. 1.135-1.141; weight per gal. 9.46 lb. Us e: Reactive chlorine atoms permit its use in organic syntheses. Co n t a in er s : 9-lb. (1-gal.) containers; 45- and 500-lb. drums; tank cars. Furan (Furfurane)--(CH)40: A highly volatile, colorless liquid, miscible with most organic solvents; slightly soluble in water. Boiling range 80.6-89.6F. (27-32C.); F. P. --122.2F. (--85.68C.); flash point (TAG Closed Cup) --32F. (--35.6C.); Sp. Gr. 0.935-0.938; weight per gal. 7.8 lb.; stabilized with 0.05% hydroquinone. Us e: Furan is highly reactive by either substitution or addition. Lends itself to pharmaceutical and industrial syntheses. CON TAINERS: 7-lb. (1-gal.) containers; 35- and 400-lb. drums; tank cars. Tetrahydrofuran (Tctramethylene Oxide, THF) -- (CH2)40: A clear, colorless liquid with ether-like odor; readily miscible with organic solvents and water. Boil ing range 149-152.6F. (65-67C.); F. P. -- 163.3F. FURAN PRODUCTS AND PEROXYGEN PRODUCTS (--108.52C.); flash point (TAG Closed Cup) 6F. (--14,5 C.); Sp. Gr. 0.885-0.888; weight per gal. 7.4 lb.; stabilized with 0.1% hydroquinone; other stabilizers available. USE: Excellent solvent for high molecular weight polyvinyl chloride resins and vinylidene chloride copolymers for coatings, films, adhesives, printing inks, etc.; unique reaction solvent for carrying out Grignard, sodium acetylide, and reduction reactions, including hydrogenations; component in paint remover and cold cleaner formulations; chemical synthesis; and extraction processes. Co n t ain e r s : 7-lb. (1-gal.) containers; 35- and 400-lb. drums; tank trucks; tank cars. PEROXYGEN PRODUCTS "Albone" Hydrogen Peroxide: (See Hydrogen Peroxide, below.) Calcium Peroxide--Ca02: Cream colored powder con taining Ca02 and CaO; Ca02 content min. 75%; active oxygen content min. 16.65% by weight. Liberates oxygen slowly in water suspensions; decomposed by heat; insoluble in alcohol, ether, and ammonia; soluble in weak acids or ammonium salt solutions. Us e: In manufacture of pharma ceutical and cosmetic preparations; general oxidation appli cations. Co n t a in e r s : 25- and 100-lb. fiber drums. Hydrogen Peroxide--H202: Colorless, clear liquid; slightly pungent; miscible in all proportions with water; liberates oxygen when decomposed. "Al b o n e " 35 Hy d r o g e n Pe r o x id e : H202 content 35% by weight; active oxygen 16.4% by weight; weight per gal. 9.44 lb. at 20C.; density 1.1327 at 2QC.; pH (Beckman meter) min. 3.4. Us e: Bleaching of textiles such as cotton, wool, silk, rayon, linen, and blends of these fibers with synthetic fibers; bleaching of practically all vegetable and animal fibers, fur, straw, and buttons; fur carroting; purification of metal salt solutions; treat ment of starch, glue, etc.; wood and wood pulp bleach ing; bleaching of oils and fats; oxidation of vat dyes; dilution for pharmaceutical and cosmetic uses; general oxidizing reactions and synthesis of such products as alkaline earth peroxides and organic peroxygen com pounds such as benzoyl peroxide; in epoxidation and hydroxylation reactions; polymerization catalyst; vis cosity control agent for starch and cellulose derivatives; in electroplating. Co n t a in er s : 120-lb. glass carboys; 250-lb. aluminum drums; aluminum tank trucks for delivery in Boston, New York, and Philadelphia areas; 33,000-, 39,000-, 57,000-, and 77,000-lb. aluminum tank cars. "Al b o n e" 50 Hy d r o g e n Pe r o x id e ; H202 content 50% by weight; active oxygen 23.5% by weight; weight per gal. 9.98 lb. at 20C.; density 1.196 at 20C.; pH (Beckman meter) min. 2.4. Us e: Same as "Albone" 35, above. Co n t a in e r s : 265-lb. aluminum drums; aluminum tank trucks for delivery in Boston, New York, and Philadelphia areas; 34,000-, 41,000-, 60,000-, and 80,000-lb. aluminum tank cars. "Al b o n e" 90 Hy d r o g e n Pe r o x id e : H202 content 90% by weight; active oxygen 42.3% by weight; weight per gal. 11.61 lb. at 20C.; density 1.3913 at 20C. Us e: Monopropellent and fuel oxidant. Co n t a in er s : 300-lb. aluminum drums; 49,000-, 70,000-, and 95,000-lb. aluminum tank cars. DUP210010642 ELECTROCHEMICALS DEPARTMENT SODIUM AND CYANIDE PRODUCTS "Oxone" Monopersulfate Compound: A white granu lar, free flowing material containing the active ingredient potassium peroxymonosulfate; readily soluble in water; 1% solution has pIJ of 2-3. Minimum active oxygen content 4.5%. Strong oxidizing agent. Us e: For manufacture of dry laundry bleaches, detergent-bleach washing com pounds, scouring powders, plastic dishware cleaners, and metal cleaners; preparation of hair wave neutralizers and pharmaceuticals; general oxidizing reactions. Co n t ain e r s : 50-lb. multiwall bags; 400-lb. liber containers. "Perdox" Sodium Borate Perhydrate: A free flowing, white powder; dissolves readily in distilled water to produce mildly alkaline peroxide solution. Equivalent NaB03 HaO content min. 96.6%; active oxygen content min. 15.5%. Us e: For preparation of dentifrices and hair wave neutralizers; bleaching; oxidation of dyes; stain remover for plastic dishes. Co n t ain e r s : 125-lb. fiber drums. Sodium Borate Perhydrate: (See "Perdox" Sodium Borate Perhydrate, this page.) Sodium Perborate Tetrahydrate--NaSOs-4HzO: Tech nical and N. F. Grades. An alkaline, white powder, soluble in water and acid solutions; in water, gives slightly alkaline solution containing hydrogen peroxide and borate; active oxygen content min. 10%; sodium perborate content min. 96.2%; Technical Grade passes 20 mesh screen. Us e: Bleaching textiles; oxidizing agent for vat colors; assistant to textile detergents; constituent of dentifrices and phar maceuticals; ingredient in dry laundry bleach powders and plastic dishware stain removers; polymerization catalyst. Co n t ain e r s : 100-lb. multiwall bags; 250-lb. fiber drums. Sodium Peroxide--Na202: Pale yellow beadlike material; stable when dry; readily dissolves in cold water to form hydrogen peroxide and caustic soda; reacts with acid solutions to form hydrogen peroxide. Na202 content min. 96%; active oxygen content approximately 20% by weight. Te c h n ic a l Gr a d e ("So l o z o n e " So d iu m Pe r o x id e ): Dustless, free flowing. Us e: Bleaching of paper furnishes such as groundwood, kraft, and sulfite pulps; in recover ing waste papers; bleaching of cotton knit goods; purifi cation of metal salt solutions; manufacture of organic and inorganic peroxides; general oxidizing agent. Co n t a in e r s : 75-lb. pails; 400-lb. drums. Ca l o r if ic Gr a d e: All passes 28 mesh. Meets A. C. S. specifications. Us e: For calorific determinations. Co n t a in e r s : 65-lb. pails. "Solozone'' Sodium Peroxide: (See Sodium Peroxide, above.) Zinc Peroxide--Zn02: Fine, grit free, white powder com posed of zinc peroxide and zinc oxide; Zn02 content min. 51.75%; active oxygen content min. 8.5% by weight. Technical Grade. Insoluble in water; dissolves readily in acid media to form hydrogen peroxide solution. Us e: For manufacture of deodorants, dusting powders, ointments, bleaching creams, and foot powders. Co n t a in e r s : 100-lb. fiber drums. SODIUM AND CYANIDE PRODUCTS Case Hardener: (See Cyanide Mixtures, below.) Copper Cyanide: (See Page 8.) "Gyanegg" Sodium Cyanide: (See Sodium Cyanide 96%, Page 12.) Cyanide-Chloride Mixtures 75%, 45%, and 30%: (See Cyanide Mixtures, below.) Cyanide Mixtures (Cyanide-Chloride Mixtures, Case Hardener): White fused slabs 3 in. x 1% in. x 1 in. (ap proximately 3 oz.) or granular form. Us e: Case hardening of steel. Co n t a in e r s : 100-lb. cases (containing twenty 5-lb. steel, ten 10-lb. steel, or four 25-lb. fiber containers); 100- and 200-lb. steel drums. 75% Cy a n id e -Ch l o r id e Mix t u r e : Sodium cyanide content min. 75%, sodium chloride min. 12%, sodium carbonate max. 13%. F. P. approx. 1094F. (590C.); Sp. Gr. 1.74 at 77F. (25C.), 1.26 at 1580F. (860C.). 45% Cy a n id e -Ch l o r id e Mix t u r e : Sodium cyanide content min. 45%, sodium chloride min. 45%, sodium carbonate max. 10%. F. P. approx. 1247F. (675C.); Sp. Gr. 1.91 at 77F. (25C.), 1,37 at 1580F. (860C.). 30% Cas e Ha r d e n er : Sodium cyanide content min. 30%; sodium chloride min. 25%, max. 35%; sodium carbonate max. 45%. F. P. approx. 1090F. (587C.); Sp. Gr. 2.12 at 77F. (25C.), 1.52 at 1562F. (850C.). "Cyanobrik" Sodium Cyanide: Briquette form. (See Sodium Cyanide 96%, Page 12.) "Cyanoflake" Sodium Cyanide: Flake form. (See So dium Cyanide 96%, Page 12.) "Cyanogran" Sodium Cyanide: Granular form. (See Sodium Cyanide 96%, Page 12.) Potassium--K: Soft silvery metal; extremely reactive; M.P. 147F. (63.7C.); B.P. 1400F. (760C.). Available in ]/2-oz. sticks (1% in. x 1 in.) and 1-, 2)4-, and 4)4-lb. bricks. Us e: Laboratory reagent; preparation of inorganic potassium compounds such as oxide, peroxide, or cyanide; in organic reactions involving condensation, dehalogenation, reduction, and polymerization. Co n t a in e r s : 1-lb. tins (boxed) with inside glass bottles containing J4"ozsticks; 25-lb. pails of bricks. Potassium Cyanide--KCN: A white, granular, poisonous chemical; contains 98% min. potassium cyanide. Us e: In high speed copper and silver plating processes; with sodium cyanide for cyanide nitriding. Co n t a in er s : 100-lb. steel drums. Sodium--Na: A silvery white metal; soft and ductile; extremely reactive; M.P. 208F. (97.8C.); B.P. 1638F. (892C.); weight at M.P. 59.4 lb./cu. ft. (solid); inert toward dry petroleum ether, toluene, kerosene, naphtha, and other hydrocarbon liquids but reacts vigorously with water. Supplied in 1-, 2)4', 5-, and 12)4-lb. bricks; contains 0.04% calcium max. and 0.005% chloride max. Us e: In manufacture of indigo and dye intermediates, chemicals, perfumes, and drugs; as a "scavenger" and deoxidizer in metal melting and refining; metal descaling; and as a heat transfer medium. Co n t a in e r s : 50-lb. cases (two 25-lb. pails of T or 2)4 lb. bricks), 100-lb. cases (ten 10-lb. tins of 2)4-lb. bricks), 220-, 280-, and 290-lb. drums (1-, 2)4-, 5-, or 12)4-lb. bricks), 400-lb. nonreturnable drums (fused sodium), and 78,000-lb. tank cars. 11 DUP210010643 ELECTROCHEMICALS DEPARTMENT VINYL PRODUCTS Sodium-Copper Cyanide Double Salt: (See Page 9.) Sodium Cyanide 96%--NaCN: A white solid fused in 1-oz. eggs ("Cyanegg" sodium cyanide) and in granular ("Cyanogran" sodium cyanide) or flake ("Cyanoflake" sodium cyanide) form; also 1-oz. briquettes ("Cyanobrik" sodium cyanide). M. P. 1040F. (560C.); B.P. 2732F. (1500C.). Sodium cyanide content--"Cyanobrik", 97% min.; other forms, 96% min. Us e: Heat treating of steel; in electroplating; in cleaning of metal, including neutralizing after pickling; in fumigation; unhairing of hides; for manu facture of indigo, dye intermediates and other chemical compounds; in the extraction of gold, silver, zinc, and lead from ores. Co n t a in e r s ; 100-lb. cases (twenty 5-lb. tins, ten 10-lb. tins, or four 25-lb. fiber containers), 100- and 200-lb. steel drums. Sodium Monoxide--Na0: Light gray, fine, spherical particles. Usually contains a small amount of free sodium (l%-2%) and may contain a small amount of sodium peroxide (l%-2%.) Us e; As a condensing or polymerizing agent in organic reactions; as a dehydrating agent. CON TAINERS: 60-lb. pails; 350-lb. steel drums. Sodium Suifocyanide (Sodium Thiocyanate)--NaCNS: Available in anhydrous form and as solution. Us e; In electroplating, textile printing, processing of color film, preparation of suifocyanide compounds. An h y d r o u s : Grayish-white granules; NaCNS content min. 98%; soluble in water and alcohol; M. P. 549F. (287C.). Co n t a in er s : 25- and 100-lb. fiber drums. So l u t io n : Aqueous solution of high purity; colorless; NaCNS content min. 47% (sold on basis of 100% NaCNS). Co n t ain er s : 500-lb. steel drums. Zinc Cyanide: (See Page 9.) Us e: Paint vehicles; adhesive base materials for cellophane, wood, paper, cloth, ceramics, leather, cork, and metals; binders for paper pulp, sawdust, leather scrap, sand, clay, nonwoven fibers, pigments, and cement; textile finishes and sizes; paper coatings for greaseproofing and heat-sealing. CONTAINERS: 45-lb. steel pails; 500-lh. steel drums; 500-lb. fiber drums; 19,000- to 32,000-lb. tank trucks; 37,000- and 75,000-lb. tank cars. "!va Da Iu v In v I A AAfstft ^nlnf lArt / 60-05): Colorless, odorless synthetic resin available as a 60% solution in methanol. The resin is thermoplastic, stable to light and heat, soluble in a number of organic solvents and compatible with many resins and plasticizers. Because of its strong adhesion to most types of surfaces, and excellent heat-sealing properties, polyvinyl acetate is widely used in adhesive and binder applications. Us e; Ad hesive and binder; vehicle for metallic pigments; protective coatings on metal; heat-seal applications; greaseproofing; stiffening and permanent sizing. Co n t a in e r s : 38-lb. pails, 400-lb. drums. "Elvanoi" Polyvinyl Alcohol: Water-soluble synthetic resin; white to creamy-white powder; odorless; pH 6-8; density 1.21-1.31 at 20C. Available in 8 grades covering various degrees of hydrolysis in three viscosities (high, medium, and low). Grade Viscosity of 4% Water Solution at 20C. (cp) % Hydrolysis 72-60 .................... 72-51 .................... 50-42 .................... 55-65 45-55 35-45 99 -100 97.7- 98.4 87 - 89 71-30.................... 71-24 .................... 52-22 .................... 70-05 .................... 51-05.................... 28-32 23-28 21-25 4-6 4-6 99 -100 97.7- 98.4 87 - 89 99 -100 88 - 89 VINYL PRODUCTS Polyvinyl alcohol solutions are stable over long periods of time. Films and coatings from these solutions are exceed "Elvacet" Polyvinyl Acetate Emulsion: Viscous, milk- ingly tough, colorless, unaffected by all oils, greases, fats, white water dispersions of polyvinyl acetate or of copoly hydrocarbons and most organic solvents, and possess a high mers of polyvinyl acetate which can be diluted with water. degree ofimpermeability to gases and air. USE: Textile warp Films or coatings formed by the evaporation of water are size; size for nylon and rayon knitting yarns; pigmented thermoplastic, grease resistant and, in some cases, water paper coating binder; greaseproofing paper; paper size; top resistant; they exhibit excellent adhesion to a wide variety size on paperboard for high gloss printing; wet strength of materials. The emulsions possess the desirable properties paper laminating adhesive; nonblocking, remoistenable of high solids content (54%-55% min.) at workable vis adhesive; adhesive and binder for leather, cloth, nonwoven cosity and ease of application from a water medium which fabrics, and paper; pigment binder; temporary protective eliminates the need for expensive and flammable solvents. coatings; molded products; emulsifying agents; emulsion Available in the following grades: stabilizer and thickener; photosensitive films; chemical intermediate. Co n t ain e r s : 10- and 25-lb. fiber cartons; Viscosity of Emulsion 50-lb. multiwall bags; 100-lb. fiber drums. Grade Type (Brookfield) poises Solids Content Vinyl Acetate--CH3COOCH =CH : An extremely pure monomer for polymerization or copolymerization reactions. ;: 80-900 Homopolymer 8-10 55% min. A flammable, volatile, highly reactive liquid with a : 81-900 Homopolymer 8-10 55% min. pleasant odor. As shipped, it is inhibited with hydroquinone or phenothiazine. Boiling range 71.8-73.0 aC. (161- :, 81-1600 Homopolymer 15-17 55% min. 163.4F.); Sp. Gr. 0.9335-0.9345. Us e: Monomer for j; 84-1100 Homopolymer 9 13 54%-5G% polymerization or copolymerization reactions employing i 1423 Copolymer 9-17 54%-56% suspension, emulsion, or solution techniques; chemical intermediate. Co n t a in e r s : 375-lb. steel drums; 4,000-gal. ;| 1440 Homopolymer 6-10 54%-56% tank trucks; 8,000- and 10,000-gal. tank cars. 12>\\ DUP210010644 EXPLOSIVES DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 BRANCH OFFICES: Explosives Sales Section: Birmingham 2, Alabama Chicago 46, Illinois Denver 2, Colorado Duluth 2, Minnesota Huntington 1, West Virginia Joplin, Missouri New York 1, New York Palo Alto, California Pittsburgh 22, Pennsylvania Seattle 4, Washington Chemical Sales Section: Boston 10, Massachusetts Charlotte 1, North Carolina Chicago 46, Illinois Cleveland 20, Ohio Houston 27, Texas New York 1, New York Brown-Marx Building, 2000 First Avenue 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) Midland Savings Building, 444 Seventeenth Street Hartley Building, 742 East Superior Street West Virginia Building, Fourth Avenue and Ninth Street First National Building, 402 Main Street Empire State Building, 350 Fifth Avenue 701 Welch Road One Gateway Center Hoge Building, 701-705 Second Avenue ALpine 4-3248 ORchard 5-1010 MAin 3-1253 RAndolph 4-8593 JAckson 5-5124 MAyfair 4-5060 LOngacre 3-6400 DAvenport 6-3536 ATlantic 1-7777 MAin 3-8830 140 Federal Street 427 West Fourth Street 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 11900 Shaker Boulevard 3202 Weslayan Street 1000 Empire State Building, 350 Fifth Avenue HAncock 6-1711 FRanklin 5-5561 ORchard 5-1010 LOngacre 1-5070 MOhawk 7-9197 LOngacre 3-6400 PLANTS: Na me o f Pl a n t Barksdale Belin Birmingham Carl Junction Carneys Point DuPont Louviers Pompton Lakes Potomac River Repauno Seneca k a il w a y St a t io n Barksdale, Wisconsin Moosic, Pennsylvania (L.C.L.) 1 Hillside Junction, Pennsylvania ] (C.L.&L.C.L.)J Mineral Springs, Alabama Carl Junction, Missouri Carneys Point, New Jersey DuPont, Washington Louviers, Colorado Pompton Lakes, New Jersey Martinsburg, West Virginia Gibbstown, New Jersey Seneca, Illinois Ma il Ad d r e s s Barksdale, Wisconsin Moosic, Pennsylvania Watson, Alabama Carl Junction, Missouri Penns Grove, New Jersey DuPont, Washington Louviers, Colorado Pompton Lakes, New Jersey Martinsburg, West Virginia Gibbstown, New Jersey Seneca, Illinois EXPLOSIVES SALES SECTION PRODUCTS "In d ic a t e s Re s a l e Pr o d u c t s BLASTING SUPPLIES AND ACCESSORIES Blasting Caps: Small aluminum cylinders, closed at one end and loaded with a charge of fulminating compound, which is exploded by the spit or sparks from safety fuse. Furnished in two strengths: No. 6 and No. 8; No. 8 being the stronger. Us e: For firing high explosives with safety fuse. Co n t a in er s : 10, 25 and 100 caps per box. Blasting Caps, Electric: No. 6 and No. 8 strengths, designed to be exploded by electric current. Nylon plastic insulated copper or iron wires. Lengths of wires range from 4 ft. up for copper and from 4 to 20 ft. for iron. Us e: For firing high explosives electrically. Co n t a in e r s : 25 and 50 per carton. Blasting Caps, Electric Delay: Similar to electric blast ing caps bnt having a time interval of about 1 second between periods. Us e: For shots to be fired in rotation with a single set of wiring and with one application of the electric current. Co n t a in e r s : 25 and 50 per carton. 13 DUP210010645 EXPLOSIVES DEPARTMENT Blasting Caps, Electric MS Delay: Similar to delay electric blasting caps but having time intervals of 0.025, 0.050 or 0.100 second between periods. Co n t a in er s : 25 and 50 per carton. Blasting Caps, Electric "SSS" Seismograph: (See "SSS" Seismograph Electric Blasting Caps, this page). ^Blasting Galvanometer: A small direct reading ohmmeter contained in a leather case. Us e: To determine resistances of electric blasting caps, electric squibs, leading wire and the completed blasting circuit. ^Blasting Machines: Used for the generation of current for the firing of electric blasting caps, electric squibs, etc. Types of machines are as follows: *CD-12-1........................... *CD-32-l........................... *CD-48-l........................... *No. 10 Twist.................... ^Permissible Multiple Type *Pushdown No. 30 . . . *Pushdown No. 50 . . . Rated Capacity Str. Par. Par. Series Series NR NR 30 30 480 60 1200 NR NR NR NR NR 150 125 200 10 10 30 NR 250 50 NR =Not Recommended ^Blasting Switch: Used for the power firing of blasts. Especially designed from the standpoints of safety and reliability. *Cap Crimper (No. 4): Makes waterproof crimp on a cap when a smooth surface fuse is used. Equipped with fuse cutter. *Quarrycord: Similar to Ignitacord but specially con structed to bum at a speed of about one foot per second. Used for igniting fuse in multiple blockhole secondary blasting with the added feature of remote firing. Ideal for use in thunderstorm season and not affected by stray currents. Safety Match: Short paper tube coated at one end with match composition. The lighter is slipped over end of fuse and ignited by a match or striking with match box cover. Jet Tappers: Shaped charges for tapping open-hearth steel furnaces. Co n t a in e r s : 20 per carton. ^Leading Wire: No. 16 gauge solid copper wire, insulated with plastic or rubber composition (waterproof) or cotton coated -with paraffin (dampproof). Us e: As connecting source of electric current to blasting cap circuit. CONTAIN ERS: 125-, 250- and 500-ft. lengths. *Portable Magazines: Sectional steel construction; made in various sizes from 5-to 40-ton capacity. Us e : For storing high explosives, blasting powder and blasting caps. t*"Primacord" Detonating Fuse: Consists of a fabric tube about 0.21 in. in diameter, filled with pentaerythrite tetranitrate (PETN), a high explosive. Detonates with plain or electric blasting cap at a velocity of 20,300 ft. per second. Four types: Plain, Reinforced, Plastic Reinforced and Plastic Wire Countered. Us e : For firing large blasts and deep well drill holes. Co n t a in e r s : Spools containing 500 or 1,000 ft. ' l"Primacord" MS Connectors: Device for insertion into "Primacord" lines. Us e: To provide delays of approxi mately 0.005, 0.009 or 0.017 second. Co n t ain er s : 50 per tube, 500 per carton. ^Rheostat: An electric resistance bridge, having six bind ing posts and five different units of resistance wire between. Us e: To determine when a given blasting machine is work ing at its rated capacity. *Cap Crimper, Superior: Bench type cap crimper which produces waterproof crimp. Hand or foot operated. Equipped with fuse cutter. ^Connecting Wire: No. 20 and No. 22 gauge copper wire with plastic or paraffin coated cotton insulation. Us e : To connect an electric blasting cap of one hole to another hole when the attached wires are not long enough. Detonators (Fuses and Primers): (See Blasting Caps, Pages 13, 14). *Fuse Lighters *Safety Fuse (Bickford's Fuse): Consists of a core of A type black powder enclosed in several wrappings of jute and cotton threads with waterproofing asphalt type layers between the wraps. Many different types and brands are available. Us e: For single blasts with black powder; for firing other explosives in conjunction with a blasting cap. ^Sectioning Switch: Used as a safety switch in blasting lines for power firing circuits. Squib, Electric: An aluminum cylinder containing a deflagrating charge ignited by an electric current. Us e : For firing pellet and blasting powder electrically. Hot Wire: Similar to toy sparkler. Has black powder composition on an iron wire. "SSS" Seismograph Electric Blasting Caps: Us e : Especially developed for shooting dynamite in oil pros *lgnitacord and Thermalite Ignitacord: Cordlike materials which burn with a hot external flame. Used for igniting fuse so as to obtain rotational firing. pecting. No time lag between severance of bridge wire and firing of the cap. Co n t ain e r s : 5, 10, 25 and 50 per carton depending on wire length. 1 Lead Spitter: A tube of lead filled with black powder. *Tamping Bags: Heavy kraft paper bags, glued with waterproof cement; sizes from to 5 in. in diameter and Master: Device for lighting two to six fuses simul 8 to 24 in. in length. Us e : To hold sand, clay, etc., for taneously. ^Trademark of The Ensigo-Bickford Company. DUP210010646 CA PLOSIVES DEPARTMENT stemming (confining) the charges of explosives in bore holes. Co n t a in e r s : Bale lots of 5,000. *Voltohmeter: A combined blasting galvanometer, stray current detector and AC-DC voltmeter. Us e: Serves the same purposes as the Blasting Galvanometer and offers a means for guarding against stray currents of a magnitude which would be hazardous in electric blastings. It also offers a means of checking line voltages in power blasting EXPLOSIVES Black Sporting Powder: A uniformly dense black powder manufactured in four granulations--Fg, FFg, FFFg and FFFFg ranging respectively from coarse to fine. Us e: The Fg or coarse grain is used for loading large capacity car tridges; the FFg or intermediate grain for medium capacity cartridges and the FFFg, FFFFg or fine grain for smaE capacity cartridges or general shotgun shooting. CON TAINERS: Each size is packed in 1-lb. metal canisters, 6j^-lb. in Y kegs and 25-lb. metal kegs. Blasting Gelatin (S.N.G.): Solidified nitroglycerin. A rubbery, elastic substance, resembling printers' rolls or art gum in appearance. It is the strongest commercial explosive. Us e: In shooting oil wells. Co n t a in e r s : 28.5-lb. (10-qt.) and 57-lb. (20-qt.) cases, 50-lb. cases for use other than in oil wells. Blasting Powder (Saltpeter or A Blasting Powder): A composition of potassium nitrate, charcoal and sulfur. Available in a wide range of grain sizes. Us e: For fireworks; for blasting dimension stone and architectural stone; for quarrying slate; used in safety fuses. Co n t a in e r s : 25-lb. kegs. Blasting Powder (Soda or B Blasting Powder): A composition of sodium nitrate, charcoal and sulfur. Avail able in a wide range of grain sizes. Us e: For coal mining (principally); for construction work when dry; for clay mining and open pit ore mining. Co n t a in er s : 25-lb. kegs. Ditching Dynamite: A 50% straight dynamite, espe cially packed so that it will have the greatest possible uniformity, cartridge for cartridge, and will give the best results in propagation ditching. "Extra" Dynamite: Ammonia dynamites ranging from 115 to 172 cartridges (1 Y x 8 in.) per 50-lb. case. Available in both "high" and "low" velocity type3. Us e: In mining soft ores, limestone, gypsum, salt, clay, etc. In quarrying as top loads in well drill holes and as blockhole charges in secondary blasting. Gelatin Dynamite (Straight Gelatin): Aplastic, highly water resistant, dense explosive furnished in grades from 20 to 90% strengths. Us e: For blasting in wet boreholes; for submarine blasting and blasting in quarries; for tun neling, shaft sinking and mining hard, tough materials. "Geiex" Dynamites: Semigelatin dynamites having plasticity and water resistance between the dynamites and true gelatins. Us e: In mining metallic ores, gypsum, lime stone and in quarrying. Gypsum A Dynamite: A modified "Extra" dynamite. Us e: Especially designed for mining gypsum. "Hi-Cap" Dynamite: A low cost grade primarily in tended for quarries, open pit mines and construction work. Offered in large diameter cartridges, in which it has mod erately good water resistance, or in bags. The latter are used where the "Hi-Cap" is to be poured into the borehole. "Hi-Cap" is quite free running and may be used in holes down to at least 3-in. diameter. "Hi-Velocity" Gelatin: A low density straight gelatin which has the property of always exploding at a very high velocity. This is not the case with most gelatins, which have a low velocity unless strongly confined in a borehole or detonated by a straight 60% primer. Us e: Oil, gas and water well shooting, submarine blasting, mudcapping. "Hi-Velocity" Seismograph 60% Gelatin: A straight gelatin especially designed and packaged for use in seismic prospecting. Recommended for deep hole work and lengthy water exposures. Offered in plain or Fast-Coupler cartridges. Loggers' Powders: 15 to 30% strengths. Us e: Blasting stumps for the logging industry in the Pacific Northwest. Nitroglycerin--C3H5(NO?.)3: An oily liquid; Sp. Gr. ap proximately 1.6. Us e: Essential ingredient in all DuPont dynamites; sold to drug trade in alcohol solution or with French chalk or sugar of milk to be used for medicinal purposes. Pellet Powder (Soda or B Blasting Powder): An improved deflagrating explosive. Us e : In mining coal where permissibles are not needed. Made in two grades in cylin ders 2 in. long, with a central perforation of Y in. Four of these cylinders are placed end to end and wrapped in paraffined paper to form cartridges. Available in diameters from 1J4 to 2 in. Permissible Explosives: Explosives which have been tested by U. S. Bureau of Mines and passed as safe for blasting in gaseous and dusty mines if used in accordance with certain specified conditions. "Duobel" Explosives: High velocity permissibles fur nished in five grades based upon velocity and cartridge count. Us e : For mining coal where lump coal is not a factor. "Gelobel" Explosives: Gelatin and semigelatin type permissibles; high density and high water resistance. Us e: For coal mining where high strength, high velocity, concentration of charge and water resistance are desired. "Lump Coal" C Explosives: A product with a very low velocity of detonation. Us e: For coal mining where maximum production of large size coal is desired. "Lump Coal" CC Explosives: A low velocity per missible similar to "Lump Coal" C except that due to slight change in the ingredients it can be manufactured in smaller diameter cartridges. Us e: For coal mining where maximum production of large size coal is desired. "Monobel" Explosives; Low velocity permissibles; fur nished in six grades based upon velocity and cartridge count. Us e: For mining coal especially where lump is desired. "Red Cross" "Extra" Dynamite: High density, general purpose ammonia dynamites of 20 to 60% strengths. Us e: For quarrying, stripping, agricultural and general con struction work. 15 DUP210010647 EXPLOSIVES DEPARTMENT "Red Cross" F.R. Dynamites: Four grades of dynamite (based upon strengths) with free-running characteristics (F.R.). Designed for use in sprung holes and adapted for replacing black powder in quarrying and in blasting soft rock. Co n t ain er s : 50-lb. case containing four 123^-lbbags. tive to fire as "Nitramon". "Nitramite" sells at a lower price than "Nitramon" or "Nitramex". "Nitramite" must be detonated by a primer specially constructed for use with this blasting agent. Us e : Excellent for relatively easy shooting material, top loads, and for certain coyote shot layouts. Co n t a in e r s : 4to 9-in. diameter. "Seismex" Dynamite: An ammonia dynamite for seismic prospecting. Low cost but not recommended for water depths over 200 feet, with immediate shooting, or for any type of "sleeper" work if water is present. Offered in plain or Fast-Coupler cartridges. "Seismex" PW Dynamite: An ammonia dynamite for seismic prospecting in shallow-hole patterns. Very low cost but has water resistance sufficient only for work that is loaded and shot on the same day. Offered in plain or FastCoupler cartridges. "Seismogel" Gelatin: A straight gelatin dynamite de signed and packaged for use in seismic prospecting when water conditions are only moderately severe. Offered in plain or Fast-Coupler cartridges. The latter provide a convenient means for assembling a rigid column of explosive. Special Gelatin Dynamite (Ammonia Gelatin): A plastic, highly water resistant (not as good as Straight Gelatin), dense explosive furnished in grades from 25 to 90% strengths. Us e: In mining hard rock, tunneling, quarrying, construction work, shaft sinking (if not too wet). Straight Dynamite: Produces quick shattering action; is very sensitive to impacts; 20 to 60% nitroglycerin. Us e; In ditching by the propagation method, submarine blasting. "Stripkolex" Dynamite: A dynamite designed espe cially for shooting the coal in stripping operations. BLASTING AGENTS Akremite: A low cost blasting agent packed in plastic, expansible containers. Us e: For quarries, strip mines, etc. using large size blast holes. The plastic containers expand to fill the holes and offer a moderate degree of water re sistance. Note: Akremite is a patented product on which DuPont is exclusive licensee with right to sublicense. Akremite can be safely manufactured by the consumer and licenses are available for this purpose. "Nilite" Nitro Carbo Nitrate: A low cost, moderately free-running blasting agent. Us e : For blasting in quarries, gfrip mines, construction work, etc., using holes down to 3-in. diameter. Packed in 50- and 100-lb. multi-wall paper bags or 50-lb. large diameter, round asphalt-laminated burlap bags. "Nitramex" No. 2 Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge hammers or by heat. Is detonated by specially constructed primers. Us e: For blasting in extremely hard shooting quarries and strippings. CONTAINERS: Metal cans 4)^- to 9-in. diameter x 24 in. "Nitramite" FR Nitro Carbo Nitrate: A free-running, bag packed blasting agent similar to "Nitramite". Us e: For blasting in quarries, construction work, etc., employing holes down to 2-in. diameter. "Nitramon" Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge ham mers, the strongest commercial blasting cap or by heat. Is detonated by specially constructed primers. Us e: For blasting in quarries and stripping operations. Co n t a in er s : Metal cans 4Yr to 9-in. diameter. "Nitramon" No. 2 Blasting Agent: A blasting agent having all the safety features and in all respects similar,to "Nitramon" except that it is of lower strength and velocity and sells at a lower price. Like "Nitramon", it is detonated by specially constructed primers. Us e: For blasting in quarries and stripping operations. Especially adapted for top hole loading. Co n t ain e r s : Metal cans 4J4- to 9-in. diameter. "Nitramon" HH Blasting Agent: Same general prop erties as "Nitramon" but highly heat-stable. Us e: Strip blasting over burning coal. Co n t ain e r s : Cans 4J-4- to 9-in. diameter. "Nitramon" S Blasting Agent: Has the same charac teristics as "Nitramon", but is packed in cans which screw together to form a rigid charge. Us e: For seismic pros pecting. Co n t ain e r s : 2 in. x 1 lb., 2)/% in. x 1 lb. "Nitramon" WW Blasting Agent: Same character istics as "Nitramon". Us e: For seismic prospecting at sea. Co n t a in e r s : 10-, 16%-, 25-, 30-, 40- and 50-lb. cans. Pelletol No. 1: A high density, free-running blasting agent which sinks readily in water and has unlimited water resistance. Safety characteristics similar to those of "Nitramex" No. 2. Us e: For loading around "Nitramon" and "Nitramex" No. 2. Co n t a in e r s : Packed 4 bags per 50-lb. case. Primer for "Nitramon" and "Nitramex" No. 2 Blasting Agents: Us e: Special primer for detonating "Nitramon" and "Nitramex" No. 2. Alust be initiated by "Primacord" Detonating Fuse. Co n t a in e r s : Metal cans 4-> 5-. 5J4-, 7- and 8-in. diameter x 24 in. Primer for "Nitramon" S Blasting Agent: Primers which screw tightly to "Nitramon" S. Detonated by elec tric blasting cap or "Primacord". Us e: To detonate "Nitramon" S in seismic prospecting. Co n t a in er s : 2 in. x 1 lb., 2J/2 in. x 1 lb. "Nitramite" Nitro Carbo Nitrate: A low density blast Water Work Booster: Small copper tubes containing a ing agent similar to "Nitramon", packed in heavy spiral priming charge which are inserted in a copper well in the 3 i shell with metal ends, the water resistance depending entirely upon the container. "Nitramite" is as insensitive to shock and friction as "Nitramon" but is not as insensi- "Nitramon" WW cans. Detonated by an electric blasting cap. Us e: To bring about the explosion of "Nitramon" WW. Co n t ain e r s : Cartons of 50, cases of 500. 16 DUP210010648 CHEMICAL SALES SECTION PRODUCTS Acetate Flake: Secondary cellulose acetate in flaked or powdered form, of approximate average composition CeH702(0H)J4(CH3C00)23^. Us e : In the plastics in dustry for making sheets, rods, tubes and molding powder; sheets for wrapping purposes; in photographic film industry for making x-ray and other safety films; in lacquer industry for making Certain miscellaneous lacquers; m textile in dustry for making lacquer coating for fabrics, etc.; in wire industry for making lacquer coating for insulated wire. Co n t ain e r s : Moisture resistant sacks containing 60-lb. Ammonium Nitrate--Reagent Grade--NH4NO3: Crys talline or granular powder. Us e: Where a product having a minimum purity of 99.95% is required, i.e. laboratory reagents, uranium processing and as a solid fuel propel lant. Co n t a in e r s : 100-lb. polyethylene-lined paper bags, 400-lb. polyethylene-lined fiber drums. Ammonium Nitrate--Technical Grade--NH4N03: Crystalline or granular powder, and solution. Us e: Manu facture of explosives, paper, and other materials not requiring a chemically pure product. Co n t ain e r s : 100-lb. paper bags, 400-lb. fiber drums, tank cars, tank trucks. Ammonium Nitrate--U.S.P. ("Niox" Ammonium Nitrate)--NH4N03 : Crystalline or granular powder and solution. Us e: In manufacture of nitrous oxide gas. Co n t a in er s : 100-lb. polyethylene-lined paper bags, tank cars, tank trucks. Aniline--CBH6NH2: Pale yellow, oily liquid. Us e: Dyes, intermediates, paints and varnishes. Co n t a in e r s : 55-gal. non-returnable metal drums (450-lb.), tank cars, tank trucks. (Sold also by Organic Chemicals Department.) BL-353 Blowing Agent: Yellow powder comprised of 70% N.N'-dimethyl-NjN'-dinitrosoterephthalamide and 30% white mineral oil. Controlled thermal decomposition liberates nitrogen. Non-staining, non-discoloring gas generant. Us e: For formation of foamed and cellular polyvinyl chloride and for expanding other plastics and elastomers. Co n t a in e r s : 5-lb. fiber drums. Cyclotrimethylenetrinitramine(CycIonite, Hexogen, RDX): Crystalline or granular high explosive. USE: Shaped charges, "Primacord" and explosive specialty items. Co n t a in e r s : 100-lb. net fiber drums. . Dimethyl Terephthalate (DMT) -- H=COOCC6H,COOCH3: A high-melting, exceptionally high purity ester of terephthalic acid. Us e: In the manu facture of polyethylene terephthalate, wire enamels and as an intermediate for the synthesis of organic derivatives of terephthalic acid. Co n t ain er s : 50-lb. polyethylene-lined paper bags, 10-, 50- and 350-lb. polyethylene-lined fiber drums. Diphenylamine (DPA)--Refined--(CeH5)2NH; Avail able in a molten state and as a flaked solid. Us e : In manu facture of rubber antioxidants, as an additive for lubri cating oils and greases, as a polyethylene stabilizer against oxidative degradation, phenothiazine, fungicides and in secticides, smokeless powder stabilization, a chemical intermediate in dyes, as an antioxidant and stabilizer for fats, oils, soap, paint, printing ink, glue, and pharmaceuti cals. Co n t a in e r s : 50- and 100-lb. paper bags, 325-lb. fiber drums, 70,000- and 90,000-lb. tank cars. (See also Grasselli Chemicals Department, Page 53 for veterinary medicines.) "Hitec" Heat Transfer Sait: A eutectic mixture com prised of sodium nitrite (NaNCh), sodium nitrate (NaNOs) and potassium nitrate (KNOs). Us e: As a heat transfer medium for both heating and cooling operations in the range of 300-1,000F., such as maintaining reactor temper ature, high temperature distillation, and preheating of reactants. Co n t a in e r s : 150-ib. and 400-lb. fiber arums. Iron Oxide--Essentially Fe2Oa and FeO: By-product from aniline manufacture. Us e: Source of iron for metal lurgical operations; pigment preparation; as a cement additive; as an additive in various clay operations. Co n t a in e r s : Shipped in bulk in open railroad gondola cars only. Jet Perforators: Explosive charges utilizing the "shaped charge" principle in a variety of sizes. Us e: In perforating oil well casing to permit entry into the well bore of fluids from producing formations. Co n t a in e r s : Fiberboard cases of 200. Lead Azide--PbNe: White to huff, crystal solid when dry. In dry state is a highly sensitive primary detonator. Must be kept wet with water or an ethyl alcohol and water mix ture until used. Us e: In manufacture of detonators. Co n t a in e r s : 150-lb. steel drums. Mixed Acid--Technical (Nitrating Acid): Mixture of nitric (HN03) and sulfuric (H2S04) acids. Us e: As a nitrat ing agent in the manufacture of explosives, nitrocellulose, nitroglycerin, dyes, and various organic intermediates. Co n t ain er s : 700-lb. metal drums, tank cars and tank trucks. Nitric Acid--HN03: In all concentrations. Clear colorless to light yellow corrosive liquid. Us e: Metallurgy, manu facture of dyes and dye intermediates, etching agent for photoengravers, plastic and synthetic fiber manufacture, manufacture of explosives, general oxidation purposes. Co n t a in e r s : Tank cars and tank trucks. Nitrobenzene--CeH5N02: Pale yellow liquid. Us e: Inter mediate for manufacture of aniline, azobenzene, rubber chemicals and other organic intermediates. Co n t a in e r s : 55-gal. (500-lb.) metal drums, tank cars and tank trucks. Nitrocellulose--Soluble Types: Cellulose nitrate with variable nitrogen content in a wide range of viscosities. Available wet with butyl, ethyl or isopropyl alcohol and water. Us e: Excellent film-forming material for use in lacquers and other types of finishes; coating for cellophane, paper, fabrics, component of adhesives. Co n t a in e r s : 55-gal. capacity returnable metal drums. Nitroglycerin--Beta Lactose Mixture--C3H5(N03)3: Fine white powder. Available as a trituration of 10% nitroglycerin, 90% beta lactose by weight. Us e: Medidnals. Co n t a in e r s : 10-lb. and 50-lb. polyethylene-lined fiber drums. Sheet Explosive: A pliable sheet of high explosive and binder available in various thicknesses. Us e: Can be used in almost any high explosive application and for such special applications as explosive swaging, metal hardening, metal forming, shaped charges or wherever thin layers of a high-velocity Class A explosive are desired. Co n t ain e r s : Fiber boxes. 17 DUP210010649 EXPLOSIVES DEPARTMENT Pentaerythrite Tetranitrate (PETN): White crystalline powder. Sensitive initiating explosive when dry. Must be kept wet with water or an ethyl alcohol and water mixture until used. Us e: Manufacture of detonators; "Primacord" and explosive specialties. CONTAINERS: 55-gal. (280-lb. net) metal drums. "Pyrocore" Ignition Detonating Cord: A small di ameter, unusually high-velocity detonating cord capable of igniting propellant grains directly or intermediate ignition materials. Also satisfactory for propagating a detonation from point to point with a minimum of damage to adjacent equipment or devices. Available in various sizes and strengths. Co n t ain e r s : Various lengths on spools or as special devices having electrical initiators or reception primers. Rivets, Aircraft and Industrial Blind Expansion: Fast acting, strong one-piece fasteners. Available in a wide variety of sizes and alloys. Us e: For "blind" fastening of primary and secondary assemblies partially or totally in accessible from the rear, and in open work. Co n t a in e r s : Fiberboard boxes of 100, 500 and 1,000. Riveting Irons: Us e: Electrical heating tools for expand ing Du Pont Aircraft and Industrial Blind Expansion Rivets. Riveting Iron Tips: Metal tips specifically fashioned for use with Du Pont Riveting Irons. Sodium CIVIC (Sodium Carboxymethylcellulose): Dry, free-flowing, light cream to white colored fibrous powder completely soluble in water. Available in technical and refined grades, in several viscosity types and degree of substitution levels. Us e: As a thickening, stabilizing, dis persing, suspending, film-forming agent, and protective colloid in aqueous systems, for soil suspension in detergents, fluid-loss control in drilling muds; strength improvement and surface coating of paper and paperboard; as a textile warp size, laundry size, synthetic tobacco leaf binder, ceramics binder, tooth paste thickener, liquid detergent thickener, ice cream stabilizer; in foods, pharmaceuticals, cosmetics, paints, adhesives, textile finishes, and emul sions, Co n t ain e r s : Multi-ply moisture resistant 50-lb. and 75-lb. bags, 51-gal. fiber drums. Sodium Nitrite--U.S.P.--NaNO?.: Available as a granu lar or pelleted solid, purity 99.5% minimum. Us e: As a corrosion inhibitor in oil storage tanks, domestic fuel oil tanks, oil product pipelines, oil tankers, antifreeze solu tions, diesel engines, wrapping materials, cutting fluids, greases and lubricants, fire extinguishing compounds, re frigerating systems, temporary protective coatings, paints and sea water systems; in heat transfer salt, in azo dye manufacture, in rubber retarders and accelerators, in curing meats, in inhibiting polymer formation and in insecticidal smokes. Co n t a in e r s ; 100-lb. paper bags, 150-lb. and 400-lb. fiber drums. Sulfuric Acid--H2S04: Clear colorless to light pink, heavy, oily, corrosive liquid; soluble in water in all pro portions with evolution of heat. Strength: 60 Be.................... 77.67% HsS04 66 Be.................... 93.20% H2S04 Us e: In the manufacture and processing of a wide variety of chemical and industrial products. (See also Grasselli Chemicals Department, Page 49.) 18 TerepHthalic Acid (TPA) -- Technical -- HOOCCq H4COOH : Pale yellow crystalline solid. Aromatic diabasic acid, M. P. 425C., insoluble in water and most organic solvents. Undergoes typical reactions of organic carboxylic acids and ring substitution. Useful as polymer intermediate, and as raw material for plasticizers, alkyds with high thermal stability and as a cross-linking agent. CONTAINERS: 50-lb. and 300-lb. fiber drums. Trinitrotoluene (TNT)--CvHsOsN, : Pale yellow, flaked solid. Us e : As an intermediate in the dye industry, in the manufacture of detonators and explosive specialties; mili tary explosives. Co n t a in er s : 60-lb. net fiber boxes. "Unicel" ND Blowing Agent: Cream-colored powder containing 40% N-N'-dinitrosopentamethylenetetramine (DNPT) and 60% inert filler. Gas generant which releases nitrogen under controlled heating. Stable up to 180-185C. but can be activated to decompose at lower temperatures. Us e: For incorporation in elastomers or resins as a source of gas for forming cellular or sponge materials in a wide range of densities. Co n t a in e r s : 100-lb. fiber drums. (See also Elastomers Department, Page 3.) "Unicel" NDX Blowing Agent: Cream-colored solid containing 80% N-N'-dinitrosopentamethylenetetramine and 20% by weight of plasticizer. Has properties similar to "Unicel" ND but provides twice volume of gas per unit weight. Us e: As gas generant in preparation of foamed or cellular elastomers or plastics where the inert filler in "Unicel" ND may be objectionable. SMOKELESS POWDERS Improved Military Rifle Powders: These powders repre sent the latest development in progressive burning nitro cellulose powders, giving higher velocity than the older types within the prescribed limits of pressure. They do not contain nitroglycerin. CONTAINERS: 20-lb. metal kegs. I.M.R. No. 3031: For use in sporting rifle ammunition requiring heavy bullets and in military cartridges. I.M.R. No. 4064: For use in military cartridges, most prominent of which, in this country, are those for the 30/06 Springfield Rifle. I.M.R. No. 4198: For use in sporting rifles and with light bullets in military cartridges. I.M.R. No. 4227: For use in sporting rifles and with light bullets in military cartridges. I.M.R. No. 4320: For use in sporting rifles and in military cartridges with limited case capacity. I.M.R. No. 4350: For use in magnum cartridges. PB Smokeless Shotgun Powders: A single base propel lant, designed particularly to be used in light and medium shotshell loads. The powder is very flexible and is noted for its consistency of performance in all makes of shells. It is clean burning and not affected by moisture. Co n t a in e r s : 25-lb. metal drums. Sporting Rifle Powder No, SR-4759: A nitrocellulose powder, especially designed for use in reduced loads in large capacity cartridges, such as the 30/06 Springfield and similar cartridges. This powder is not recommended for use in pistol and revolver cartridges. Co n t a in er s : 25-lb. metal drums. DUP210010650 FABRICS ARB FINISHES DEPARTMENT FABRICS DIVISION GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 tAeoni 3HLU urr Nemours -Building 'wiimington 98, ueiaware FRospect 4-1000 BRANCH OFFICES: Boston 42, Massachusetts Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Detroit 2, Michigan Fairfield, Connecticut Los Angeles 22, California Newburgh, New York New York 1, New York Philadelphia, Pennsylvania St. Louis 10, Missouri 35 Cambridge Parkway 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 2607 Live Oak Street 5-238 General Motors Building 2000 South Garfield Avenue Empire State Building, 350 Fifth Avenue 308 East Lancaster Avenue, Wynnewood 2300 Hampton Avenue UNiversity 4-1442 ORchard 5-1010 MAin 1-8516 TAylor 4-2517 TRinity 5-1990 CLearwater 9-3351 RAymond 3-8401 3700 LOngacre 3-6400 Midway 9-1420 Mission 7-0800 PLANTS: Fairfield, Connecticut Newburgh, New York PRODUCTS VINYL COATED MATERIALS "Fabrilite" Vinyl Coated Fabrics: These materials are made on a wide variety of fabric backs and are coated with selected vinyl compounds engineered for maximum resis tance to flexing and wear. The fabric backing supports the vinyl coating and makes it resistant to ripping, tearing, scuffing and cracking. All "Fabrilite" is water resistant, soap- and water-washable. Made in a wide variety of colors, embossed effects and finishes, "Fabrilite" is available in a range of grades based on the service requirements of the end use. Grades are determined by the weight and con struction of the fabric base and the amount ofvinyl applied. Upholstery grades include: Elastic knit fabric back con struction for ease in stretching and tailoring around curves; breathable constructions that promote seating comfort because they permit passage of air through thousands of tiny pores. The following list shows how "Fabrilite" is used by other manufacturers: Automotive: For upholstery and trim, headlining, bind ings and welts, and seat covers Baby Carriages: For upholstery and tops Belts Bicycle Saddles Bookbinding: For looseleaf binders "Fabrilite" in Jeweltone Metallic Colors: Wide range of nontarnishing metallic colors for upholstery and trim, for footwear, for handbags, for wall coverings. "Fabrilite" in Pattina Finish: Unusual reproduction of patent leather for shoes and handbags Folding Door and Partition Enclosures Footwear: For upper stock in certain types of women's shoes and slippers; for quarterlining, sock lining; for platform wrappers and heel coverings. Furniture Upholstery and Household Furnishings Handbags and Pocketbooks Luggage Motion Picture Screens for the Home Nontarnishing Gold and Silver Colored Metallic "Fabrilite": Made with metallized "Mylar" polyester film for evening shoes and trim, for automotive interior trim, for displays and exhibits. Sporting Goods Table Pads Wall Coverings "PX" Vinyl Book Cloth: A special grade of vinyl im pregnated washable book cloth, especially engineered for full color decoration by offset lithography. "Tontine" Flame Resistant Vinyl Drapery Material: Coated fabrics for window shades, for darkening draperies in visual aid schoolrooms, for school stage curtains and cyclorama backgrounds. UNSUPPORTED VINYL MATERIALS "Fabrilite" Unsupported Vinyl Materials: These ma terials are made without a fabric backing from selected vinyl compounds for handbags, pocketbooks, looseleaf binders and notebooks. 19 DUP210010651 r FABRICS AND FINISHES DEPARTMENT PYROXYLIN COATED AND IMPREGNATED MATERIALS "Fabrikoid" Pyroxylin Coated Fabrics: The fabrics are processed with pyroxylin to produce water resistant, soap- and water-washable materials for applications which do not require the resistance to flexing given by vinyl coated fabrics. Bindings and Welts Bookbinding Card Table Covers Case Coverings Draw Sheet: For newspaper printing presses Footwear: For strapping in certain types of women's shoes and slippers and for sock lining Hat Sweats Luggage Lining Paper Machine Aprons: For paper making equipment Table Mats and Pad Coverings Tire Liners: Prevents adhesion to rubber Trimmings: For millinery a-d costumes "PX" Book Cloth: A special grade of pyroxylin or vinyl impregnated, washable book cloth for bookbindings. "Tontine" Washable Window Shade Cloth: This material is a uniformly woven fabric impregnated and coated on both sides with pyroxylin or vinyl compounds. "Tontine" is available in many colors with range of light transmittancy. Opaque coated cloth and fire resistant grades are also available. CEMENTS "Fairprene" Industrial Cements: These products are made from synthetic rubber compounds for cementing various combinations of cured and uncured "Fairprene" sheet stock (without fabric insert), cured and uncured "Fairprene" coated fabrics, cured and uncured rubber to leather, fabrics, paper, metal and wood. RUBBER COATED, SILICONE COATED AND SYNTHETIC RUBBER COATED MATERIALS "Fairprene" P.A.W. Tape (Protective and Waterstop): A seam sealant engineered for shipbuilding and aircraft use in oil-, air- and water-tight structural joints. FABRICS DIVISION "Fairprene" Synthetic Rubber Coated Fabrics: A line of synthetic rubber coated fabrics, including silicone rubber, designed for industrial applications in the auto motive, aviation, gas, chemical, petroleum and marine fields. "Fairprene" coated fabrics have extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for diaphragms, gaskets, washers, packings, seam sealants and curing bags and blankets used in laminating. "~**ug Anchor" Rug Underlay. Foam rubber underlay which prevents rugs from slipping. "Velvetex": Vinyl Clad Foam Rubber Cushioned Floor Covering. SYNTHETIC RUBBER SHEET STOCKS "Fairprene" Synthetic Rubber Sheet Stocks: With out fabric insert; made from synthetic rubber compounds, including silicone rubber, for special industrial applications in the automotive, aviation, gas, chemical, petroleum and marine fields. Has extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for gaskets, washers, packings, seam sealants and blankets used in laminating. SYNTHETIC RESIN COATED FABRICS, LAMINATES AND FELTS "Armalon" TFE-Fluorocarbon Fiber Felt: An in dustrial felt made in various thicknesses, either as porous material or impregnated with tetrafluoroethylene resin. The impregnated product is used as a gasketing material on equipment handling corrosive materials. The plain felt is used as a filter material, particularly for corrosive prod ucts. The TFE-Fluorocarbon resin provides a maximum degree of temperature and chemical resistance. "Armalon" TFE-Fluorocarbon Resin Coated Glass Fabrics, Tapes and Laminates: For electrical insulation; for antistick and antifriction conveyor belts and covers for heat sealing units in the food and packaging industries, for industrial diaphragms and gaskets requiring unusual resistance to chemicals and to high and low temperatures. "Lecton" Acrylic Resin Coated Fabrics and Lami nates: Glass fabrics coated with "Lecton" acrylic resin and laminates made from these coated fabrics. Offered as an electrical insulating material, these fabrics have ex cellent thermal stability at Class B temperatures (130C.) and can be used for extended periods up to 150C. They are essentially unaffected by "Freon" fluorinated hydrocarbons. 20 DUP210010652 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION AUTOMOTIVE FINISHES GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware EXPORT OFFICE: Nemours Building Wilmington 98, Delaware AUTO MANUFACTURERS' SALES OFFICES: Detroit 2, Michigan Los Angeles 22, California 5-238 General Motors Building 2000 South Garfield Avenue COLOR ADVISORY SERVICE: Detroit 2, Michigan 5-238 General Motors Building PLANTS: Chicago 14, Illinois Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo 1, Ohio Tucker, Georgia 2100 Elston Avenue 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 TELEPHONE PRospect 4-1000 FRospect 4-1000 TRinity 5-1990 RAymond 3-8401 TRinity 5-1990 PRODUCTS Cements: Automotive Gasket: Prepared in heavy varnish or pigmented paste form; applicable by brush. Us e: For cementing gaskets in place on automotive motors to increase production efficiency. Co n t ain er s : 1- and 5gal. cans, 53-gal. drums. Special Cements: A wide range of adhesives for bonding various substances by modifying applications and curing methods. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Clears: Bronzing Liquid (Lacquer or Alkyd Type): Lacquer type is air-dry; alkyd type is air-dry or bake. Us e; Vehicle for aluminum or bronze powders for protection and decoration of certain automobile small parts. CON TAINERS: Qt., 1- and 5-gal. pails, 53-gal. drums. Metal (Alkyd Type): Exterior or interior synthetic varnish. Us e: Over imitation grain or decals, or over bright chrome plated parts. Co n t a in er s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Lacquer Type): Pyroxylin base clear. Us e: For interiors over simulated wood grain or decals. Co n t ain e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Methacrylate Type): Methacrylate base clear. Us e : Protection of bright chrome plated parts, exterior exposure, dip or spray application. Co n t ain e r s : Qt., 1and 5-gal. cans, 53-gal. drums. Metal (Methacrylate Modified Lacquer Type): Mixed pyroxylin-methacrylate base clear. Us e: Pro tective coating for exterior of bright aluminum panels on buses. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Modified Alkyd Type): Synthetic clears. Us e: For interiors over simulated grain on car interior metal trim for application by electrostatic spray. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Metal (Phenolic Spar Type): Exterior or interior varnishes. Us e: Over simulated wood grain or decals. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Alkyd Type): Clear synthetic varnish. Us e: Wood station wagons. Co n t ain e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Lacquer Type): Modified pyroxylin base. Us e: Interior wood trim of custom built cars. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood (Phenolic Spar Type): Oil modified, phenolic spar varnish. Us e : Wood station wagons. Co n t a in e r s : Qt., 1- and 5-gal. cans, 53-gal. drums. Wood Sealer (Alkyd or Phenolic Type): Oil modified alkyd or phenolic with or without toxic component which retards fungus growth. Us e: Applied by dip to wood station wagon dimensional pieces or truck body parts to seal wood pores and prevent moisture absorption. Co n t a in e r s : 5-gal. pails, 53-gal. drums. 21 DUP210010653 FABRICS AND FINISHES DEPARTMENT Compounds: "Duco" Polishing or Rubbing Compound: A polish ing material in paste form, designed for machine appli cation or hand rubbing. Us e: For final polishing of "Duco" lacquers to smooth surface and to bring up full gloss. Co n t a in e r s : 1- and 5-gal. cans. Shielding Compound.; A pigmented semipaste, having nondrying vehicle. Us e: Masking parts of surface while another color is being applied. Used with "Duco" finishes only. Co n t ain er s : 1- and 5-gal. cans. "Dulux" Foam Resin: Polyester resin, specific for use with isocyanates to produce flexible polyurethane foams. Co n t a in er s : Qt., 1- and 5-gal. cans, 53-gal. drums. Enamels: Chassis Black: An air-dry, black, pigmented enamel; applicable by brush or spray with an oil, asphalt, pyroxylin or synthetic type base. Us e: On automobile chassis for protection and decoration. Co n t ain e r s : 1and 5-gal. cans, 53-gal. drums, tank wagons, tank cars. "Dulux" Enamels: Baking and air-dry, clear and pig mented enamels based on a synthetic type vehicle; ap plicable by spray--manual, machine or electrostatic. Us e: Finishing of steel and wood automobile bodies, sheet metal parts, wheels, etc. Co n t ain e r s : Pt., qt., 1and 5-gal. cans, 53-gal. drums, tank wagons. Engenamel: (See Page 28). Fender: A black, oil or synthetic resin modified asphaltum type enamel applied by dipping and baking at high temperature. Us e: Fender and miscellaneous parts finish applied over rubber first coat. Co n t ain e r s : 5-gal. cans, 53-gal. drums, tank wagons, tank cars. Gas Tank: A pigmented, black enamel based on an oil semi alkyd or full alkyd type vehicle; applicable by spray or flow coating; air-dried or force-dried at temperatures up to 250F. Us e: Exterior finish of feme plate automo bile gasoline tanks. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums, tank wagons. Motor: Air-dry, pigmented, colored enamels; applicable by spray; available in an oil, synthetic or pyroxylin type base. Us e : On automobile motors. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Small Parts Dip: Pigmented, black or colored enamels based on semi alkyd or full alkyd vehicles to bake 250 to 350F. Us e: Automobile small parts. Co n t a in er s : 1- and 5-gal. cans, 53-gal. drums. Lacquers: Dip: Air-dry, pigmented, colored or clear lacquers on a special modified pyroxylin base; applicable by dip. Us e: On instrument panels, molding, interior decoration, etc. Co n t a in er s : 1- and 5-gal. cans, 53-gal. drums. "Duco" Lacquers: Air-dry, pigmented, colored lac quers on a special modified pyroxylin base; applicable by spray only. Us e: Finishing of steel automobile bodies, FINISHES DIVISION: Automotive Finishes sheet metal parts, etc. Co n t ain er s : Pt., qt., 1- and 5gal. cans, 53-gal. drums. "Duco" Metalli-Chrome Lacquers: Metallic finishes producing unusual color effects of great durability. Ap plicable by spray only. Us e: Finishing of automobile bodies and sheet metal parts. Co n t a in er s : Pt., qt., 1and 5-gal. cans, 53-gal. drums. "Duco" Striping Lacquers: Air-dry, pigmented, colored lacquers; applicable by brush. Us e: For striping automobile bodies and wheels and touch-up work. Co n t ain e r s : Pt., qt., 1- and 5-gal. cans. "Lucite" Acrylic Lacquers: Air-dry pigmented colored lacquers on acrylic resin base; applicable by spray only, but possessing much greater durability to exposure than "Duco" lacquers. Us e: Finishing of steel automobile bodies and sheet metal parts. Co n t ain e r s : Pt., qt., 1and 5-gal. cans, 53-gal. drums. Primers: Black Dipping Primer (Baking, Pigmented, Oil or Alkyd Type): Unusual stability in large dip tanks. Us e: Dipping fenders, hoods and miscellaneous small parts. Base coat for "Duco" or "Lucite" lacquers or "Dulux" enamels. CONTAINERS: 1- and 5-gal. cans, 53gal. drums, tank wagons, tank cars. Flash Primer (One-Bake Type): Baking, pigmented, colored, liquid paints on a synthetic base; applicable by spray. Us e: Applied to steel automobile bodies and followed immediately by surfacer or baking enamel without drying period between coats. Co n t a in e r s : 1and 5-gal. cans, 53-gal. drums. Metal (Oil Type): Air-dry and baking, pigmented, colored, liquid paints with oil base; applicable by spray. Us e: On automobile bodies and sheet metal parts to give adhesion between the metal and succeeding coats. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Metal (Pyroxylin Type): Air-dry, pigmented, colored, liquid paints on a pyroxylin base; applicable by spray. Us e; For touch-up work only on automobile bodies and only under lacquer. Co n t ain er s : 1- and 5-gal, cans, 53-gal. drums. Metal (Synthetic Type): Air-dry and baking, pig mented, colored, liquid paints with synthetic base; appli cable by spray or brush. Us e: On automobile bodies and sheet metal parts to give adhesion between the metal and succeeding coats. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Wood: A special low pigmented type primer applicable by brush or spray. Us e: On wood commercial automobile bodies. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Wood Sealer: Clear or pigmented, synthetic or oil type, air-dry, penetrating sealer with or without toxic in gredient to retard growth of fungi; applicable by dip, brush, spray or flow. Us e : On wood before other finish to seal pores and prevent failure by moisture absorption. Co n t a in e r s : 1- and 5-gal. cans, 53-gal, drums. T DUP210010654 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Finishes Primer-Surfacers: "Preparakote" Primer-Surfacers: Air-dry or baking, highly pigmented, liquid paints on a special synthetic base; applicable by spray or brush. Us e: On steel auto mobile and commercial car bodies, preparatory to finish ing with either "Duco" or "Dulux" finishes. Co n t ain er s : 1- and 5-gal. cans, 53-gal. drums. Prirner-Surfacers (Baking Type): Highly pigmented, liquid paints of the baking type on an oil or semi alkyd base; applicable by spray. Us e : On steel automobile and commercial car bodies, preparatory to finishing with either "Duco", "Lucite" or "Dulux" finishes. CON TAINERS: 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Non-Sanding Type): Medium pig mented, modified alkyd base, for use under "Duco" or "Dulux" finishes. Material must be baked. When used under "Dulux" it can be flashed and the baking ac complished simultaneously with the baking of the top coat. Us e: On steel automobile and commercial car bodies, preparatory to finishing with "Duco" or "Dulux" finishes. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums. Primer-Surfacers (Pyroxylin Type): Highly pig mented, lacquer type primer-surfacers. Us e: Spot repair ing of car finish under lacquer or synthetic topcoats. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Putties: "Duco" Putties: Air-dry, highly pigmented, paste materials; very fast drying; applied by glazing to fill metal imperfections. Us e: On automobile bodies pre paratory to finishing with either "Duco", "Lucite" or "Dulux" finishes. Co n t a in er s : l/%-, 1- and 5-gal. cans. "Dulux" Paste Filler: Alkyd pastes for filling pores in wood of station wagons or interior wood trim of custom built cars or filling pinhole pores in glass fiber reinforced polyester panels or parts preparatory to finishing with clear, surfacing material, or color. Co n t a in e r s : 5-gal. cans, 30-gal. drums. "Dulux" Putties: Air-dry, highly pigmented, paste materials; minimum shrinkage; applied by glazing to fill metal imperfections. Us e: Preparatory to finishing with either "Duco" or "Dulux" finishes. Co n t a in e r s : Oil Base Putties: Air-dry, highly pigmented, paste materials on oil base; applied by glazing to fill in dentations in metal which are too deep for the surfacer to fill. Us e : On automobile bodies over primer. Co n t a in e r s : J^-, 1- and 5-gal. cans. Retarders: Slow evaporating, high boiling "Duco" or "Lucite" solvents. Us e: Added to "Duco" or "Lucite" thinner to improve leveling and/or to prevent blushing in humid weather. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Sealers: Automotive bleederseal sealer for bleeding colors. For use over and under both lacquer and synthetic enamel type finishes to prevent discoloration of the topcoat if underneath color tends to bleed. Co n t a in er s : Qt. and gal. cans. Surfacers: Air-dry and baking, highly pigmented products on oil, pyroxylin and synthetic types of bases; applicable by spraying over primer to give a satisfactory smooth surface when sanded, preparatory to "Duco" or "Dulux" finishes, or other final finish applications. Us e: On auto mobile bodies and sheet metal parts. Co n t a in e r s : 1- and 5-gal. cans, 53-gal. drums. Thinners: Clear, liquid solvents. Us e: For the reduction of primers, surfacers, lacquers and enamels to proper working consistency. Co n t ain e r s : 1- and 5-gal. cans, 53-gal. drums, tank wagons, tank cars. 23 DUP210010655 r ! ; 1 ' > j ! i j FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials AUTOMOTIVE REFINISHING MATERIALS GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES; Atlanta 18, Georgia Boston 42, Massachusetts Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Kansas City 41, Missouri Philadelphia, Pennsylvania San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 35 Cambridge Parkway 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 6001 Manchester Trafficway 308 East Lancaster Avenue, Wynnewood 1600 Trousdale Drive, Burlingame SYcamore 4-9581 UNiversity 4-1442 ORchard 5-1010 MAin 1-8516 FLeetwood 7-3870 EMerson 3-1390 TRinity 8-2700 OXford 7-3870 SERVICE WAREHOUSES: Atlanta 18, Georgia Baltimore 18, Maryland Birmingham 3, Alabama Boston 42, Massachusetts Buffalo 25, New York Charlotte 3, North Carolina Chicago 47, Illinois Cleveland 14, Ohio Columbus 12, Ohio Dallas 21, Texas Dayton 4, Ohio Denver 1, Colorado Detroit 34, Michigan Houston 11, Texas Indianapolis 4, Indiana Jacksonville 1, Florida Kansas City 41, Missouri Long Island City 1, New York Los Angeles 22, California Memphis 3, Tennessee Milwaukee 21, Wisconsin Minneapolis 4, Minnesota New Orleans 25, Louisiana Oakland 6, California Oklahoma City 2, Oklahoma Philadelphia 24, Pennsylvania Pittsburgh 5, Pennsylvania Portland 2, Oregon Providence 3, Rhode Island St. Louis 10, Missouri Salt Lake City 4, Utah San Francisco, California Springfield, New Jersey 1737 Ellsworth Industrial Drive, N. W. 400 East Twenty-Ninth Street 2301 Fifth Avenue, South 37 Cambridge Parkway 1696 Walden Avenue 2500 South Boulevard 2560 North Elston Avenue 3137 Chester Avenue 1450 Dublin Road 8510 Ambassador Row 336 Leo Street 555 Quivas Street 19930 Conner Avenue 332 South Wayside Drive 1825 West Eighteenth Street 2256 Dennis Street 6015 Manchester Trafficway 48-05 Van Dam Street 2000 South Garfield Avenue 1573 Union Avenue 2601 North Third Street . 1401 South Fourth Street 4401 Euphrosine Street 1020 East Eighth Street 201 East Hill Street 4242 Whitaker Avenue 2222 Noblestown Road 5510 Southeast McLoughlin Boulevard 217 Broad Street 2300 Hampton Avenue 990 South Sixth Street, West Post Office Box 927, South San Francisco 15 Stern Avenue SYcamore 4-9581 BElmont 5-0278 FAirfax 2-8775 UNiversity 4-9510 KEystone 7979 FRanklin 6-6477 BRunswick 8-2050 MAin 1-8516 CApital 1-6724 FLeetwood 7-4611 Michigan 5623 AComa 2-8945 FOrest 6-8800 WAlnut 3-2546 MElrose 8-5591 ELgin 3-7461 EMerson 3-1390 STillwell 6-0200 RAymond 3-8401 BRoadway 6-4746 COncord 4-6872 FEderal 2-0558 AUdubon 6658 HIgate 4-1980 JAckson 5-2194 GArfield 6-3701 WAlnut 1-9190 BElmont 2-6177 GAspee 1-2709 Mission 7-0800 EMpire 4-3582 JUno 3-0733 DRexel 6-5151 PLANTS: Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo 1, Ohio Tucker, Georgia 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 DUP210010656 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials PRODUCTS Aluminum Paint: Ready mixed for use on interiors and tops of truck bodies; on motors of passenger cars and commercial vehicles; on tractors, farm equipment, road machinery, etc. Co n t a in e r s : Qt. and gal. cans. Chassis Blacks: Varnish type products. Us e: To refinish chassis Co n t ain e r s \ 1- and 5-gal. cans, 16- and. 55-gal. drums. Clear Gloss Lacquer: A pyroxylin type clear for garnish moldings, instrument panels and other parts on the in terior of automobiles. May also be mixed with aluminum or bronze powders for striping. Co n t a in e r s : Qt., 1- and 5-gal. cans. Clear Metal Lacquer: A pyroxylin type clear for use as a protective coating for aluminum, aluminum alloys and other nonferrous metals. Co n t a in e r s : Qt., 1- and 5-gal. cans, 16- and 55-gal. drums. Clear Wood Primer: A synthetic type primer for priming wood before applying "Preparakote" Primer-Surfacers. Co n t a in e r s : Qt. and gal. cans. "Duco" Lacquer Thinners: Used for thinning pyroxy lin and acrylic lacquer products to spraying consistency. Co n t ain e r s : 1-gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. "Duco" Lacquers: Metallic and nonmetallic lines of lacquer colors, blacks and whites for spray application over recommended undercoats. Us e : For finishing or re finishing automobiles. Co n t ain e r s : Pt., qt. and gal. cans. "Duco" Lacquers--Metalii-Chrome: Metallic pyroxy lin finishes of striking beauty and unusual durability. Us e: To finish or refinish automobiles. Co n t ain e r s : Pt., qt. and gal. cans. "Duco" Mixing and Tinting Colors: Pigmented lacquer colors for intermixing in conjunction with the Blending Machine for "Duco" lacquers. Require addition of clears before using. Also for use in tinting ready mixed "Duco" colors. Us e: For finishing or refinishing automobiles. Co n t a in e r s : Qt. and gal. cans. "Dulux" Clear--Exterior: A synthetic type clear for use on automotive vehicles as a clear coating over "Dulux" enamel colors to increase gloss; a protective coating over "Dulux" type decalcomanias, lettering or other decorations; a slow size with large decalcomanias; a protective coating over stained and filled wood surfaces. Co n t a in e r s : Qt. and gal. cans. "Dulux" Enamel Reducers: Used to reduce the viscosity of "Dulux" enamels and other alkyd resin products. Co n t a in e r s : Qt. and gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. "Dulux'1 Enamels: Metallic and nonmetallic lines of alkyd resin type colors, blacks and whites for spray appli cation and nonmetallic colors, blacks and whites for brushing. Us e: To finish or refinish automobiles, trucks and all types of commercial vehicles over recommended undercoats. Co n t a in er s : Qt., 1- and 5-gal. cans. "Dulux" Enamels for Striping and Lettering: Col ored, synthetic enamels for striping and lettering work. Us e : On cars and trucks. Co n t a in e r s : J^-pt. cans. "Dulux" Mixing Enamels: Pigmented synthetic prod ucts for intermixing in conjunction with the Blending Machine for "Dulux" enamels. Require addition of an additive before using. Us e: To finish or refinish auto mobiles, trucks and all types of commercial vehicles over recommended undercoats. Co n t a in er s : Qt. and gal. cans. Fish Eye Eliminator: An additive for "Duco" and "Lucite" lacquers and "Dulux" enamels, designed to eliminate craters in these finishes when applied on surfaces previously waxed or polished with silicone products. Co n t a in e r s : Boxes of 50 capsules, each of 0.486 gm. Force-Dry and Anti Wrinkle Agent: A reducer for use when "Dulux" air-dry enamel colors are subjected to force drying to prevent wrinkling. Co n t ain er s : 1-gal. cans and 5-gal. pails. Furniture Finishes: "Duco" lacquer, clear and pig mented. Also stains and fillers. Us e: To refinish wood furniture. For interior use only. Co n t a in e r s : Qt., 1- and 5-gal. cans. Inside Body Gray Enamel: A varnish type enamel. Us e: For the inside of truck bodies. Co n t a in e r s : Qt., 1- and 5-gal. cans. "Lucite" Acrylic Lacquer: For spot or panel repair and over-all refinishing of automobiles factory finished with this type lacquer. Co n t a in e r s : Pts. and qts. Masking Compound: A strippable compound for mask ing off glass areas and smooth plated metal parts of auto mobiles prior to painting. Not recommended for appli cation over plastic decorations or parts, rubber or any painted surfaces. Co n t a in e r s : Qt. and gal. cans. Motor Enamel: A gray, varnish type enamel. Us e: For refinishing automobile and truck engines. Not suitable for exterior exposure. Co n t a in e r s : Qt., 1- and 5-gal. cans. Primers and Primer-Surfacers: "Duco" Lacquer Type Primer-Surfacers: Lacquer type undercoats for use in touch-up and in building up repaired metal areas on automobile bodies to a smooth surface prior to application of subsequent finishing coats. Co n t a in e r s : Qt., 1- and 5-gal. cans, 16- and 55-gal. drums. Non-Sanding Primer: Quick drying synthetic type primers for use under "Dulux" enamel topcoats only. For body steel, aluminum and alloys of aluminum or old finish when no surfacing is required. Us e: For finishing automobile and truck bodies; applied by spray. Co n t a in er s : Qt., 1- and 5-gal. cans. "Preparakote" Primer-Surfacers: Quick drying syn thetic type primer-surfacers for use under "Duco" and "Dulux" finishes. Fills and can be sanded. Us e: For finishing or refinishing automobile and truck bodies. Co n t a in er s : Qt. and gal. cans. 25 j! is i! S !R DUP210010657 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Automotive Refinishing Materials Spangled Galvanized Primer: A synthetic type primer for use in priming spangled galvanized iron and certain coated metal surfaces. Co n t a in e r s : Double compartment qt. and gal. cans. Zinc Chromate Primer: For use in priming inside of aluminum sheets on truck bodies to prevent corrosion caused by moisture. Also used for pre-priming contacting areas of aluminum with dissimilar metals to prevent rapid corrosion resulting from electrolysis. Co n t a in er s : Qt., 1- and 5-gal. cans. Putties: "Duco" and "Dulux" glazing putties; "Dulux" hard putty. Us e: For filling imperfections on surfaces of automobile and truck bodies. Co n t a in e r s : Qt. and gal. cans. "Duco" putties also available in 1-lb. tubes. Refrigerator Finishes: "Duco" lacquer and "Dulux" enamel finishes. For touch-up or over-all refinishing of ex teriors of refrigerator cabinets, kitchen cabinets, washing machines, home, farm and commercial freezers. Co n t a in e r s : Qt. and gal. cans. Retarder Thinner for "Duco" and "Lucite" Lac quers: Slow drying thinners to be added to "Duco" and "Lucite" lacquer topcoats for blush resistance and to im prove gloss. Co n t ain e r s : Qt,, 1- and 5-gal. cans. "Rubbertone" Rubber Finish: A black finish for re newing appearance of rubber running boards, mats, tires, etc. Co n t ain e r s : Qt. and gal. cans. Rubbing Compounds: Mediums for producing gloss on "Duco" lacquers. Us e: In automobile refinishing. Co n t a in e r s : Qt., 1- and 5-gal. cans. Sealers: Automotive Bieederseal Sealer for Bleeding Colors: For use over and under both lacquer and synthetic type finishes to prevent discoloration of the topcoat, if under neath color tends to bleed. Co n t ain er s : Qt. and gal. cans. "Duco" Clear Sealer: A pyroxylin type sealer for use on wooden furniture to hold out "Duco" lacquer topcoat . finish; for interior use only. Co n t a in er s : Qt., 1- and 5-gal. cans. Make-Ready Ready-to-Spray Primer-Sealers: For use as a touch-up primer on bare metal spots under either lacquer or synthetic enamel topcoats. Also for use as a sealer over lacquer undercoats, lacquer finishes, and aged synthetic enamel finishes to prevent "sinking in" of topcoats and as a color ground coat. Co n t ain e r s : Qt. and gal. cans. Solvents: Gun and Equipment Cleaner: An effective solvent for cleaning spray guns and other equipment. CONTAIN ERS: 1-gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. Lacquer Removing Solvent: For use in partially feather-edging damaged areas on lacquer finished auto mobiles prior to refinishing; also for quick removal of lacquer finishes down to original factory undercoats. Co n t a in e r s : Qt., gal. cans and 5-gal. pails. "Prep-Sol" (New) Solvent: A safe solvent for cleaning old finishes of "Lucite", "Duco" lacquers, "Dulux" or synthetic enamels prior to sanding and refinishing with "Lucite", "Duco" or "Dulux" finishes. Co n t ain e r s ': Qt., I- and 5-gal. pails, 16-, 30- and 55-gal. drums. "Prep-Sol" Solvent: A safe solvent for cleaning old finishes of "Duco" lacquers, "Dulux" or synthetic en amels (but not "Lucite" acrylic lacquer) prior to sanding and refinishing with "Duco" or "Dulux" finishes. CON TAINERS: Qt., 1- and 5-gal. pails, 16-, 30- and 55-gal. drums. Tractor and Implement Enamels: Pigmented semialkyd products. Us e : To refinish tractors, farm equipment, road machinery, etc. Co n t a in e r s : Qt. and gal. cans. 26 DUP210010658 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes INDUSTRIAL FINISHES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE; Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia Boston 42, Massachusetts Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Kansas City 41, Missouri Philadelphia, Pennsylvania San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 35 Cambridge Parkway 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 6001 Manchester Trafficway 308 East Lancaster Avenue, Wynnewood 1600 Trousdale Drive, Burlingame SYcamore 4-9581 UNiversity 4-1442 ORchard 5-1010 MAin 1-8516 FLeetwood 7-3870 EMerson 3-1390 TRinity 8-2700 OXford 7-3870 PLANTS: Chicago 14, Illinois Everett 49, Massachusetts Flint 2, Michigan Fort Madison, Iowa Parlin, New Jersey Philadelphia 46, Pennsylvania South San Francisco, California Toledo 1, Ohio Tucker, Georgia 2100 Elston Avenue 59 Waters Avenue Hamilton Avenue and St. John Street Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 1930 Tremainsville Road--Post Office Box 953 Post Office Box 487 PRODUCTS Acid and Fume Resisting Paints: A line of several grades and colors for maintenance use on wood and steel surfaces exposed to acid and alkali fumes. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Adhesives: (See Cements, this page). Airplane Dopes and Finishes: Airplane dopes for use in coating fabric surfaces. Airplane finishes, including under coats and topcoat finishes, for use on wood and metal surfaces. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Aluminum Mixing Vehicles: Oil base and synthetic resin base varnishes to be mixed with aluminum powder or paste for use on wood or metal. Co n t ain e r s ; 1- and 5gal. cans, 55-gal. drums. Aluminum Paints: Oil base and synthetic resin base ready mixed and ready-to-mix aluminum paints for use on exterior and interior wood and metal surfaces. Co n t ain e r s : 1- and 5-gal. cans. Aluminum Powder and Paste: Various grades for use in vehicles and bronzing liquids. Co n t a in e r s : 1-, 2- and 10-lb. cans, 50- and 100-lb. drums. Asphaltums, Air-Drying Types: Black enamels for application to metal. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Bronzing Liquids: Of various types including pyroxylin base, oil base and synthetic resin base; used as vehicles for the application of aluminum powder, aluminum paste and bronze powder. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Cements: Belt Cements: Pyroxylin base cements used in the manufacture of leather belts requiring resistance to the effects of moisture. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Hot Melt Bookbinding Adhesives: Synthetic resin adhesives, solvent free, applied in melted form for book binding purposes, principally binding together paper of books, magazines, catalogs, etc., and adhering of outside covers to magazines, catalogs, etc. Co n t ain er s : Metal containers holding solid pack of 50 and 95 lbs. Household Cement (Waterproof Cement): A pyrox ylin base cement having a wide utility in the repair of articles made of wood, glass, ivory, leather, pearl or cloth. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Pyroxylin Cements: Pyroxylin base cements for use in cementing plastic facings to wooden heels by manu facturers of women's shoes. Co n t ain e r s : T and 5-gal. cans, 55-gal. drums. Special Cements: A wide range of adhesives for an extended field of specialized uses pertaining to the prob lems of bonding various substances including "Mylar" polyester film and involving many modifications of various application and curing methods. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. Thermoplastic Cements: Used for cementing or lami nating various surfaces, such as metal foils, cloth, glass and sheets of metal that require the application of heat 27 DUP210010659 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Industrial Finishes and pressure. These cements are applied to the surfaces Fillers: and after thorough drying are ready for the necessaryheat and pressure treatment required. Co n t a in e r s : 1and 5-gal. cans, 55-gal. drums. Metal: A heavy paste type of filler used over under coats to smooth out imperfections in the metal. Co n t a in e r s : 5-gal. cans, 30-gal. drums. Driers: Compounds used to accelerate the oxidation of a finish which contains drying oils. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Wood: Available in paste or liquid form. Used for filling pores in wood as part of the preparation of surface for subsequent application of varnishes or lacquers. Co n "Duco" Furniture Lacquer, Clear and Flat: Used for t a in e r s : 5-gal. cans, 30-gal. drums. finishing wood furniture. Co n t ain e r s : 5-gal. cans, 55-gal. drums. "Flintflex" Enamels: Enamel finishes of the synthetic resin type, employing "Dulux" resins but designed for "Duco" Furniture Lacquer Sealers: (See Furniture Lacquer Sealers, this page). interior use only. Available in air-dry and baking types. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Duco" Lacquer Enamels: Pyroxylin base enamels furnished in a wide range of colors and types for satisfying the finishing requirements of numerous industries. Applied directly to a surface or over undercoats, depending on the Foil Lacquers: Clear and colored lacquers for roller coat ing application to aluminum foil. The clear may be tinted with alcohol soluble dyes. Co n t a in e r s : 5-gal. cans, 55-gal. drums. finish needed. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. Formvar Wire Enamels: (See Wire Enamels, Page 29). drums. Furniture Lacquer Sealers: Furniture Lacquer Sealers "Duco" Lacquer Metalll-Chrome Enamels: Metallic are used as a preliminary coating which is processed with finishes producing unusual color effects of great durability. sandpaper and which is then followed by the required Applicable by spray only. Us e: Finishing of sheet metal number of furniture lacquer topcoats. i parts. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. "Duco" Furniture Lacquer Sealers are similar in composi "Duco" Lacquer Penetrating Primers: Clear primers used in place of a sealer particularly in furniture finishing to give a high degree of scratch resistance. Co n t a in e r s : tion to clear and flat "Duco" Furniture Lacquers but are modified to permit easy sanding with conventional sand paper. Co n t ain e r s : 5-gal. cans, 55-gal. drums. 5-gal. cans, 55-gal. drums. "Tufcote" Furniture Lacquer Sealers differ from "Duco" "Dulux" Clear Exterior Finish: Synthetic resin base clears made in various formulations for different types of requirements and characterized by unusual flexibility and durability. Applicable either directly to a surface or as a topcoat over enamels for decorative and protective values. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "Dulux" Enamel and Paint Type Pigmented Fin ishes: Synthetic resin base enamels and paints furnished in a wide range of colors of various specific types to meet the finishing requirements of numerous industries. Applied Furniture Lacquer Sealers in that the former are modified to permit sanding with a special grade of sandpaper particularly suited for use with them. "Tufcote" Furniture Lacquer Sealers return better results than "Duco" Furni ture Lacquer Sealers with respect to film properties of toughness, scratch resistance and clarity. Co n t ain er s : 5-gal. cans, 55-gal. drums. Implement Finishes: For application by brush, dip or spray to various types of agricultural implements. Co n t a in e r s : 5-gal. cans, 55-gal. drums. directly to a surface or over undercoats, depending on the Insulating Varnishes: Used to waterproof and improve finish needed. Furnished in both air-drying and baking the dielectric properties of fabric covered electrical wires types. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. and cables. Co n t ain e r s : 5-gal. cans, 55-gal. drums. "Dulux" Foam Resin: Polyester resin, specific for use with isocyanates to produce flexible polyurethane foams. Co n t a in er s : Qt., 1- and 5-gal. cans, 55-gal. drums. "Dulux" Wood Finish, Clear and Flat: Synthetic resin base clears for furniture finishing. The film must be cured by baking. Applied over a sealer. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Enamels: (Also see Asphaltums, "Duco", "Dulux", "Flintflex" and Engenamel). Pigmented finishes available in various colors and in various types, such as pyroxylin base enamels, oil base enamels and synthetic resin base enamels. Available in air-drying and baking types. Appli cable either directly to a surface or over undercoats, de pending on the nature of the finish required. Applied by spraying, brushing, dipping or roller coating for protective and decorative purposes. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Engenamel: A red enamel (pyroxylin base) used as a sealer coat for crankcases, transmission cases, gear cases, etc., of gasoline motors. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Lacquers: (See Airplane Finishes, Bronzing Liquids, "Duco" Lacquers, Metal Lacquers and Paper Lacquers). "Lecton" Acrylic Resin Wire Enamels: (See Wire Enamels, Page 29). Metal Lacquers: Clear pyroxylin base lacquers used as finishes direct to metal, as primers on metal for enamel coats and as topcoats over pyroxylin enamels. CONTAIN ERS: 1- and 5-gal. cans, 55-gal. drums. Methacrylate Clear Finishes: Clear solutions of acrylic resin for use over noncorrosive metals. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. "NFL" Wood Stains: (See Stains, Wood, Page 29). Nylon Wire Enamel: (See Wire Enamels, Page 29). Paints: Pigmented finishes, available in various colors and in both oil base and synthetic resin base types; applicable by brush or spray either directly to surfaces or over suitable primers, depending on the nature of the finish required and surfaces to be coated. These products include metal protective paints, prepared paints for wood, flat wall paints and a wide variety of special paints for miscellaneous 28 DUP210010660 FINISHES DIVISION: Industrial Finishes purposes. Many interior paints are available on an odorless basis. (See Trade Sales Finishes). Paper Lacquers: Gloss Lacquers: For use on overprint label stock, parchment, supercalendered clay coated papers, vul canized fiber and dense paperboard to obtain a high gloss and scuff resistance. Co n t a in e r s : 1- and S-gal. cans, 55-gal. drums. Grease and Oil Resistant Lacquers: For use on parchment, glassine, kraft and dense papers to provide grease and oil resistance. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Heat Resistant Lacquers: For use on paper plates or other stock where a degree of heat resistance is needed. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Heat Sealing Lacquers: For use on glassine, parch ment and dense papers where heat sealing only is re quired. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Moistureproof Heat Sealing Lacquers: For use on glassine, parchment and dense papers where both moistureproofness and heat sealing are required. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Moistureproof Lacquers: For use on glassine, parch ment, vulcanized fiber and dense papers where moistureproofness only is required. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. Paste: (See Colors in Oil, Fillers, and Stencil Paste). Primers: Various general types, including pyroxylin base, oil base and synthetic resin base; used as the first or prim ing coat in a finishing system. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Putties: Oil base, synthetic resin and pyroxylin base putties, both of the hard type and glazing type. For use in finishing where the surface imperfections are too pro nounced to permit obtaining a smooth surface by the use of primer and surfacer coats. Co n t a in er s : 1-, 5-, 10- and 22-lb. cans. Pyroxylin base putties also available in 1-lb. tubes. Pyroxylin Solutions: Mixtures of nitrocellulose and solvents made up in various combinations as lacquer bases; also made up in combinations according to customers' specifications. Railway Finishes; A complete line of exterior and in terior finishes for passenger train cars, locomotives, freight cars, stations, signal equipment, bridges, tractors and trucks. Refrigerator Finishes: A complete line of "Dulux" high bake primers and enamels for use on metal refrigerators. Co n t a in e r s : 5-gal. cans, 55-gal. drums, tank trucks (by special arrangement). Retarders: Exceptionally slow drying thinners, used with pyroxylin base lacquers or enamels, to retard speed of drying and for prevention of blushing. Co n t ain e r s : 1- and 5-gal. cans, 55-gal. drums. Sign Finishes: A complete line of finishes, including undercoats, "Dulux" sign enamels, "Dulux" stencil paste FABRICS AND FINISHES DEPARTMENT and "Dulux" clear sign finishes. For use on silk screen stencil; press printed, gum printed and lithographed metal signs. Co n t a in er s : 5-gal. cans, 55-gal. drums. Stains, Wood: Used under lacquer and varnish to in tensify and produce various grain effects on wood. Available in ready-for-use form involving choice of pigmented, oil soluble, water soluble and spirit soluble stains. Co n t a in er s : 5-gal. cans, 55-gal. drums. Also water soluble stains available in dry powder form in 5-lb. cans. Stencil Paste: (See Sign Finishes, this page). Strippable Coatings: For various purposes such as coat ing spray booths, conveyor belts, etc., to catch and remove overspray. Also strippable coatings for temporary pro tection of idle equipment. Surfacers: Various general types, including pyroxylin base, oil base and synthetic resin base; used as a second or intermediate coat in a finishing system. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. "Teflon" TFE-Fluorocarbon Resin Finishes: Special finishes which must be cured by high fusing temperatures. They have outstanding corrosion resistance, high heat stability and anti-sticking properties. Co n t a in er s : 1-pt., 1-qt. and 1-gal. glass containers. "Teflon" TFE-Fluorocarbon Resin Wire Enamels: (See Wire Enamels, this page). Thinners: Appropriate combinations of solvents and diluents, used for the purpose of reducing the viscosity or consistency of finishes. Special grades available for various types of pyroxylin base, oil base and synthetic resin base finishes. Certain thinners used for pyroxylin base finishes may also be U3cd to remove pyroxylin films and grease from surfaces which are to be refinished. (Also see Re tarders, this page.) Co n t a in e r s : 1-and 5-gal. cans, 55-gal. drums. Tin Decorating Finishes: Varnishes and enamels, both oil base and synthetic resin base, for application to tin plate which, after baking, is formed in dies to produce various types of metal containers. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Undercoats: (See Primers and Surfacers, this page). Varnishes: Clear finishes for application by brush, dip or spray; made from drying oils combined with natural resins or synthetic resins for application to various surfaces for the deposition of films which serve to protect or enhance the appearance of surfaces. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. Washing Machine Finishes: A complete line of "Dulux" high bake primers and "Dulux" high bake enamels for use on metal washing machines. Co n t a in e r s : 5-gal. cans, 55-gal. drums. Waterproof Cement: (See Cements, Page 27). Wiping Stains: Fast drying pigment wiping stains. (See Stans, Wood, this page.) Wire Enamels: Coatings which on baking give enamel like appearance; used for application to electrical wire for the purpose of providing insulation. Co n t a in e r s : 53-gal. drums, tank cars. 29 DUP210010661 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: "7" Specialties Sales "7" SPECIALTIES SALES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE - PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 PLANTS: Flint 2, Michigan Parlin, New Jersey Hamilton Avenue and St. John Street WAREHOUSE: Los Angeles 22, California 2000 South Garfield Avenue RAymond 3-8401 PRODUCTS Acid and Rust Inhibitor: A patented, economical chemi cal inhibitor for all automotive cooling systems to help keep them rust free. It dissolves quickly, prevents rust from forming and neutralizes acids. CONTAINERS: 8J4 oz. All Purpose Sealer: Seals leaks in auto windshields and rear windows. Also for sealing leaks in garden hose, water pails, gas tanks, gaskets, plumbing fixtures, radiator hoses, hot water tanks, laundry tubs, rubber footwear, small boats, rain spouts, and metal containers. Co n t a in e r s : 1%-fl. oz. tubes. Anti-Rust and Water Pump Lubricant (Liquid): Helps prevent both electrolytic and chemical corrosion in cooling system. Lubricates water pump--eliminates squeaks. Works in plain water or any standard anti-freeze solutions. Harmless to all parts of cooling system, in cluding hose. Just pour liquid into radiator. One pint is sufficient for a cooling system holding 22 quarts or less. Recommended for passenger cars, trucks, tractors, buses. Co n t a in e r s : 12 oz. Auto Wax: An easy polishing paste wax for auto finishes. Produces a brilliant, durable luster and protects the finish from dirt, moisture and ultraviolet rays of the sun. Co n t a in e r s : 7 oz. and 1 lb. Brake Fluid, Heavy Duty: A very high quality brake fluid that meets or surpasses rigid S.A.E. specifications. Us e: In all automotive hydraulic brake systems under severe or moderate operating conditions. Co n t a in e r s : 12 oz., 1 qt., 1- and 5-gal. cans, 30- and 54-gal. drums. Bug Remover: A cleaning powder for removing bug residue from car finishes and chromium. Contains "Duponol" surface active agent in combination with other ingredients. Reacts quickly on the bugs without harming the car finish. Can also be used for cleaning windshields and headlights. Co n t a in e r s : 8 o z., 1 lb. Car Upholstery Cleaner: A liquid concentrate, to be diluted with water to form a foam used for cleaning car upholstery including hard vinyl and other plastic coated material. Gives a fresh new look to carpets, rugs and up holstery--both flat weave and pile fabrics. Also cleans paint and woodwork. Will not cause fading or shrinking. Contains no soap, acid or ammonia, and is nonflammable. Co n t a in e r s : J4 gal. Car Wash: A soapless detergent which, when dissolved in water, makes car washing easy. Removes dirt and grease quickly and safely. Makes drying unnecessary. Easy on the hands and car finish. Co n t ain e r s : )4 o z., 14, 4, 16 and 60 lb. Cellulose Sponge: (See Page 39). Chrome and Metal Polish: A speedy cleaner, polish and rust remover for chrome plated bumpers and other auto fittings. Polishes nickel, brass, copper and stainless steel. Produces a brilliant luster. Also recommended for home and shop uses. Co n t a in e r s : 12 oz. Clear Rubber Dressing: Makes black, white or colored rubber look like new. Docs not 3oak in, easy to use, tack free. Mixes with equal parts of water. Excellent for colored floor mats. Clear Windshield Sealer: A clear, waterproof cement for stopping leaks at windshields and rear window frames. Dries quickly and adheres firmly to glass, metal and rubber, making a tight, permanent, waterproof seal. Co n t a in e r s : 1%-fl. oz. tubes. Cooling System Cleanser: A heavy duty, arid type cleanser which cleans badly clogged radiators by actually dissolving rust, scale and grease without injury to hose packings or metal parts. Does not require reverse flushing. Co n t a in e r s : Lb. Cooling System Sealer: Stops and prevents leaks in automotive radiators and cooling systems quickly, without clogging the passages. Harmless to hose and metal parts. Co n t a in e r s : 12 oz. "Dissolvo" (Solvent) Tar and Road Oil Remover: A safe solvent for removing tar, road oil, old wax, Spray Glaze and silicone automobile polishes. Safe for all auto mobile finishes. CONTAINERS: 12 oz., 1 gal. Dry-Clean (Spot Remover): A nonflammable cleaning fluid, leaves no odor and does not shrink fabrics; recom mended for all color-fast garments, gloves, draperies, up holstery and fine fabrics; removes grease, wax, fresh paint, gum, adhesive tape and road tar. Co n t a in e r s : 8 o z., 1 gal. DUP210010662 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: "7" Specialties Sales "Duco" Cement: A transparent, flexible, waterproof ad hesive used in the manufacture or repair of articles made of wood, glass, china, metal, ivory, leather, paper or fabrics. Patented applicator tip keeps cement off fingers, permits application to small areas. Co n t a in e r s : %-fi. oz. tubes, 1%-fl. oz. tubes (12 to display carton). Fast Flush: A maintenance-type liquid radiator cleaner designed for routine use in spring and fall to maintain maximum cooling system efficiency. Safely disperses grease, rust and scale in 10 to 30 minutes. Requires no neutralizer, just flushing with water. Will not harm rubber or metal cooling system parts. Co n t ain e r s : Pt. Foam Cleaner: A liquid concentrate, to be diluted with water and the foam used for cleaning carpets, rugs and upholstery. Cleans both flat weave and pile fabrics. Gives them a fresh, new look. Is safe and easy to use. The diluted liquid is also an excellent paint and woodwork cleaner. Co n t a in e r s : Pt. Gas Guard: A premium grade fuel system anti-freeze which prevents ice forming in the gasoline lines of cars, trucks and tractors. Eliminates stalling and sputtering caused by the presence of water in the gasoline. Con tributes to quicker starting and smoother engine perform ance, even in subzero weather. One pint every 1,000 miles will give adequate protection. Co n t ain e r s : 12 oz. Heavy Duty Stop-Leak: For repairing cracked cylinders, engine blocks and water jackets in cars, trucks, buses and tractors. Will not harm hose or metal parts nor dog the system. Also recommended as a heavy duty stop-leak. Co n t a in e r s : Pt. Liquid Tire Black: A ready mixed, black dressing for automobile tires, rubber mats and running boards. Dries quickly to a satin finish. Co n t a in er s : Pt. M.O.A.--Motor Oil Additive: A crankcase lubricating oil additive effective in reducing oil consumption- and in reducing the formation of sludge formed during "stop and go" driving. CONTAINERS: 15 oz. cans, 5 gal., 30 gal. drums. Multi-Service Cleaner: An economical, concentrated cleaning fluid that cuts grease and grime efficiently and safely. Cleans vinyl automobile upholstery, windshields, walls, woodwork, gas pumps, soft drink coolers, and other glass, metal or painted surfaces. Will not smear, leaves no film, economical to use. Co n t ain er s : Qt., gal. New Car Wax: A triple-action paste wax especially formu lated for use on new cars and those with finishes in ex cellent condition. Cleans with an "easy on the finish" cleansing action. Waxes with a hard, solid paste wax that protects. Glazes with a brilliant, durable weatherproof coating. Co n t a in e r s : 8 oz., 1)4 lb- `'Orel" Rubber Lubricant: Harmless to rubber, yet effectually penetrates and lubricates rubber shackles and all rubber parts. Co n t a in e r s : Gal. "Pro-Tek" Protective Hand Cream: A greaseless cream which, when rubbed on the hands and arms, protects against paint, lacquer, grime, grease, thinner and many chemicals. It washes off easily and takes the dirt with it. Co n t a in e r s : 8 oz., 1 and 5 gal. Rubber Dressing: A black liquid concentrate for thinning with five parts or more of lead-free gasoline to make an excellent tire dressing. For use by service stations and re treading shops on tires, rubber mats and running boards. Co n t a in e r s : Qt., gai. "7" Polish: An excellent cleaner and polish for all car finishes--new or old, "Duco" lacquer or synthetic enamel. Rubbed on; when dry it is wiped off with a clean cloth. This removes all dirt and chalked pigment, restoring original color and luster. Co n t a in e r s : Pt., gal. "7" Rubbing Compound: A strong, abrasive cleaner for removing scratches and blemishes from auto finishes. Excellent for cleaning severely weathered finishes before waxing. Can be used for rubbing down newly sprayed finishes. Produces a smooth surface easily and quickly. Co n t a in e r s : 12 oz., 1 qt., 1 gal. Speedy Cleaner: A liquid cleaner for all auto finishes. Removes chalked pigment, traffic film, wax, Spray Glaze and silicone polishes quickly and safely. Especially recom mended for use before applying wax. Co n t ain e r s : Pt., gal. Spray Glaze: A new beauty treatment for automobiles, designed for use in a shop or service station. It produces a higher luster and has greater durability than waxes, yet requires less time and labor to apply. After the car finish is cleaned in the usual way, simply spray on Spray Glaze and wipe it off. This leaves a dry, brilliant shine without further polishing. Co n t a in e r s : Gal. Spray Glaze Cleaner No. 1: A heavy duty cleaning com pound designed for use by hand before applying Spray Glaze. Removes traffic film, chalked pigment and old wax quickly and safely. Suitable for all car finishes--new or old, lacquer or synthetic enamel. Co n t a in e r s : Gal. Spray Glaze Cleaner No. 2: Formulated primarily for use with electric polishing machines before applying Spray Glaze, but may be used by hand on new cars and others whose finish is in excellent condition. Suitable for both standard and feeder type machines. Co n t ain er s : Gal. Waterless Hand Cleaner: A solvent type cleaner that removes dirt, grease, grime, paints, oils, carbon, tar and shellac. Contains lanolin to help prevent skin irritation. Co n t a in e r s : 8 oz., 5 lb. White Wail Tire Clea ner: Cleans white wall tires easily, safely and economically. Co n t ain e r s : Pt., gal. Windshield Washer Fluid: A concentrated detergent anti-freeze solution for year-round use in windshield washers. Guards against solution freezing in winter and aids in removing bugs, grease and dirt during summer driving. Co n t a in e r s : 8 oz. 31 DUP210010663 r i FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes TRADE SALES FINISHES GENERAL OFFICE: DuPont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 EXPORT OFFICE: Nemours Building Wilmington 98, Delaware PRospect 4-1000 REGIONAL OFFICES: Atlanta 18, Georgia n J An _____,1______J.J__ DUOLUU *TLf J-VAaSactCllUSCLLS Chicago 46, Illinois Cleveland 14, Ohio Dallas 21, Texas Detroit 2, Michigan Kansas City 41, Missouri Philadelphia, Pennsylvania San Francisco, California 1737 Ellsworth Industrial Drive, N. W. 35 Cambridge Parkway 7250 North Cicero Avenue, Lincolnwood (Chicago Calls) INdependence 3-7250; (Others) 3133 Chester Avenue 8510 Ambassador Row 5-238 General Motors Building 6001 Manchester Trafficway 308 East Lancaster Avenue, Wynnewood 1600 Trousdale Drive, Burlingame SYcamore 4-9581 UNiversity 4-1442. ORchard 5-1010 MAin 1-8516 FLeetwood 7-4611 TRinity 5-1990 EMerson 3-1390 TRinity 8-2700 OXford 7-3870 PLANTS AND WAREHOUSES (COMBINED): Chicago 14, Illinois Everett 49, Massachusetts Fort Madison, Iowa Philadelphia 46, Pennsylvania South San Francisco, California Tucker, Georgia 2100 Elston Avenue 59 Waters Avenue Post Office Box 319 3500 Grays Ferry Avenue 160 South Linden Avenue--Post Office Box 608 Post Office Box 487 WAREHOUSES: Albany 5, New York Atlanta 18, Georgia Baltimore 18, Maryland Bangor 4, Maine Birmingham 3, Alabama Buffalo 25, New York Canton 2, Ohio Charlotte 3, North Carolina Cincinnati 19, Ohio Cleveland 14, Ohio Columbus 12, Ohio Dallas 21, Texas Davenport 1, Iowa Denver 1, Colorado Detroit 34, Michigan Hartford 10, Connecticut Houston 11, Texas Huntington 1, West Virginia Indianapolis 4, Indiana Jacksonville 1, Florida Kansas City 41, Missouri Long Island City 1, New York Los Angeles 22, California Louisville 16, Kentucky Memphis 3, Tennessee Minneapolis 4, Minnesota Nashville 3, Tennessee New Orleans 25, Louisiana Oakland 6, California Oklahoma City 2, Oklahoma Pittsburgh 5, Pennsylvania Portland 3, Maine Portland 2, Oregon Providence 3, Rhode Island Roanoke 5, Virginia Rochester 13, New York 32 116 Railroad Avenue 1737 Ellsworth Industrial Drive, N. W. 400 East Twenty-Ninth Street 93 Central Street 2301 Fifth Avenue, South 1696 Walden Avenue 205 Reynolds Place, S. W. 2500 South Boulevard 3001-17 Vine Street 3137 Chester Avenue 1450 Dublin Road 8510 Ambassador Row 3855 Rockingham Road 555 Quivas Street 19930 Conner Avenue 635 New Park Avenue, West Hartford 332 South Wayside Drive 114 West Eighth Avenue 1825 West Eighteenth Street 2256 Dennis Street 6015 Manchester Trafficway 48-05 Van Dam Street 2000 South Garfield Avenue 3927 Park Drive, Shivley 1573 Union Avenue 1011 Portland Avenue, South 1406 Broad Street 4401 Euphrosine Street 1020 East Eighth Street 201 East Hill Street 2222 Noblestown Road 255 Forest Avenue 5510 Southeast McLoughlin Boulevard 217 Broad Street 2710 Franklin Road, S. W. 95 La Grange Avenue ALbany 2-5711 SYcamore 4-9581 TUxedo 9-6053 BAngor 2-0554 FAirfax 2-8775 KEystone 8242 GLendale 2-9830 EDison 2-3177 UNiversity 1-3414 MAin 1-8516 HUdson 6-7191 FLeetwood 1-4232 DAvenport 2-2861 AComa 2-8945 FOrest 6-8800 ADams 3-8297 WAlnut 3-2521 JAckson 2-8233 MElrose 8-5593 ELgin 3-7461 EMerson 3-1390 STillwell 6-0200 RAymond 3-8401 EMerson 8-1659 BRoadway 6-2745 FEderal 9-4675 ALpine 5-8486 AUdubon 6658 HIgate 4-0634 JAckson 5-2194 WAlnut 1-7000 SPruce 3-2151 BElmont 2-6177 GAspee 1-2709 Diamond 2-3176 GLenwood 3-7500 DUP210010664 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes WAREHOUSES (Continued): Saginaw, Michigan Salt Lake City 4, Utah Seattle 9, Washington Spokane 7, Washington Springfield 4, Massachusetts Springfield, New Jersey St. Louis 10, Missouri Syracuse, New York ^gTYvna 9 5*lcri<i.9. Toledo 10, Ohio Youngstown 3, Ohio 2506 Weiss Road 990 South Sixth Street, West 525 Boren Avenue, North West 1017 Railroad Avenue 233 Page Street 15 Stern Avenue 2300 Hampton Avenue Bridge Street, East Syracuse 304 Soiitii 5'rsnklin. Str^sii 330 West Central Avenue 3203 Southern Boulevard PLeasant 3- 0162 EMpire 4- 3582 MAin 2-4165 Riverside 7- 5898 REpublic 2- 6216 DRexel 6- 6070 Mission 7- 0800 GRanite 2- 0451 TAmpa 2- 2414 CHerry 1 2197 STerling 8 9688 PRODUCTS The following products are available in a wide variety of package sizes. Details on sizes available by each item can readily be determined by contacting any of the above listed locations. ALUMINUM PAINTS Aluminum Paint--Ready Mixed: A smooth flowing, brilliant aluminum finish for general interior and exterior use. Resin Base: Soya, chinawood, petroleum resin. Us e: Masonry, brick, concrete, cement, metal roofs, structural steel, as a sealer for knots and sap streaks in wood. "Dulux" Ready Mixed Aluminum Paint; A brilliant aluminum finish of unusual durability for exterior and in terior use. Us e: Masonry, wood, brick, concrete, cement, metal roofs, structural steel, tanks and galvanized metal surfaces which have been primed with Galvanized Metal Primer. Heat Resistant Aluminum Paint: A brilliant, ready mixed aluminum finish. Us e: Exterior and interior use on hot surfaces; will withstand continuous temperatures up to 400F. exterior; 800F. interior. Hi-Heat Resistant Aluminum Paint: A brilliant, dura ble, smooth flowing ready-to-mix aluminum finish for use on hot metal surfaces. Resin Base: Silicone resin. Us e: Stacks, breechings, boiler fronts and other metal surfaces subjected to heat of 400F. to 600F. exterior; 400F. to 900F. interior. Phenolic Aluminum Paint--Ready-to-Mix: Resin Base: Linseed oil, phenolic resin. Us e : Exterior and interior surfaces where resistance to moisture and mild acid fumes is required. CHEMICAL RESISTANT FINISHES Corrosion resistant finishes are available to protect prop erty from chemical attack in all phases of industry. When and where such conditions prevail, it is advisable to have our representative investigate the individual problem and write the painting specifications. Such inquiries are wel come and will receive prompt attention. Typical of specialized products in this field are vinyls, phenolics, epoxies, elastomers (such as neoprene, chlorinated rubber), etc. Acid and Fume Resistant Paints: Made especially for resisting the corrosive action of acid fumes, spill of weak acids. Resin Base: Chinawood, phenolic resin. Us e: In terior or exterior where the abnormal conditions described exist. Chemical Resistant Coatings: Available in primer, in termediate and various colored topcoats. Resin Base: Vinyl resin. Us e: For interior and exterior use where ex treme resistance to abnormal chemical exposure is required. "Dulux" Fume Resistant Yellow: For use in place of Safety Color Code High-Visibility Yellow in chemical plants. Resistant to discoloration from hydrogen sulfide and fading in acid or alkaline atmospheres. Epoxy Chemical Resistant Finishes: Resin Base-.Polya mide catalyzed epoxy resins. Us e: Exterior and interior surfaces exposed to chemical fumes and occasional splashes. No. 20 Acid Resistant Paint, Black: An oil modified, heavy bodied, black asphaltum. Dries to a medium gloss. Resists mild acid and fume conditions. Possesses good heat resisting qualities up to 350F. Us e: Exterior and interior: wood, metal, brick, concrete, cement. COLOR CONDITIONING A proved practical plan for the use of color, developed by DuPont paint technicians working in collaboration with lighting and color specialists. Color Conditioning makes scientific use of color to im prove seeing conditions and increase efficiency in industrial plants, stores, hospitals, schools, offices and all types of public buildings as well as in homes. Color Conditioning eliminates glare, reduces eyestrain and fatigue, makes color and light work together. Color Conditioning insures the selection of the right color for all interior surfaces. It has been tried and proved under actual operating conditions. Three Dimensional Seeing, a part of Color Conditioning, embodies the principles of applying focal colors to machine tools to provide maximum visibility at the critical seeing area and the right color to the body of the machine, re sulting in improved production, fewer seconds or rejects, and reduction in accidents. Safety Color Code, a part of Color Conditioning, comprises a uniform system of colors for identifying industrial hazards, thus contributing to industrial safety. Color Conditioning Interior Flat Wall Enamel: A fiat wall finish with easy working properties which dries to a fine-textured finish. New odorless formula means no pun gent solvent odor during application. Excellent hiding, easy lapping, fast application. Acts as its own sealer over many surfaces* Dries overnight to a matte finish that can be easily washed. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. 33 DUP210010665 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes "Dulux" Color Conditioning Interior Gloss Enamel: exterior clean metal surfaces from which rust and corrosion Especially developed shades in full enamel finish; dries have been removed. with a hard surface; highly resistant to marring; durable; washable. New odorless formula. Resin Base: Soya-linseedalkyd resin. Us e : Especially suited for use on dadoes, trim, cabinets, and similar surfaces in homes, factories, schools, institutions where unusual durability is required. "Duco" Semi-Gloss Enamel: Our highest quality semi gloss enamel; high-hiding, quick-drying, easy brushing, smooth flowing; washable, durable. Formulated with new odorless solvents. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls, ceilings, trim and furniture, where a "Dulux" Color Conditioning Interior Semi-Gloss satin-like sheen is desired. Enamel: A new "Dulux" sejni-gloss finish for walls, ceilings woodwork csbin^ts in rssidsntisl snd commsrcis! "Duco" Undercoat White: Made especially as a first buildings. Easy application, excellent hiding and self-level coat for use under "Duco" enamels. Dries with a flat finish; ing. An extra-hard, durable finish that withstands repeated holds out succeeding coats, prevents sinking in. Odorless washing. New odorless formula. Resin Base; Soya-linseed- during application. Resin Base: Soya-linseed-alkyd resin. i alkyd resin. Us e: Interior walls, ceilings and trim. Us e: As an undercoat for interior use under "Duco" Enamels, "Dulux" Super White Enamel and other interior ! "Dulux" Color Conditioning Machinery Enamel: enamels. A hard drying enamel for use on machinery and equipment, both indoors and out. Excellent resistance to chipping, ENAMELS AND UNDERCOATS grease and oil. Fast drying, extremely tough and durable. The colors in this line are those generally used by industry to carry out the principles of Three Dimensional Seeing. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior: metal and wood surfaces; stationary and mobile machinery, plant equipment, pipe lines, etc.; farm and road machinery, vehicles, tools. Alkali Resistant Enamel: A medium gloss, chlorinated rubber base paint to serve as priming and finishing coats on surfaces subjected to abnormal exposure to alkali and moisture. Us e: Unfinished interior cement and concrete floors and other interior unpainted masonry surfaces where alkaline conditions may develop due to dampness. Also recommended for use on protected exterior concrete floors "Dulux" Color Conditioning Safety Color Code En subject to dampness from beneath. In industry where amels: These finishes make possible a system of color corrosive alkalies and moisture conditions exist. identification to promote safety. A high gloss durable finish for any type of surface--inside and out. Approved by the ' National Safety Council and American Standards Associ ation. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior: metal, wood and masonry. Farm and road machinery, vehicles, tools. "Black Jack" Enamel: A low cost, high gloss black utility enamel. Has good heat resistance. Us e: For interior use on stoves, stovepipes, heaters, boilers, and miscel laneous wood and metal surfaces; exterior use on screens and sash. CUSTOM COLOR SYSTEM The Custom Color System affords the professional and amateur decorator a choice of over 572 odorless Custom Colors for interior painting. Custom Tinting Colors in tubes are added to Blending Bases to provide matching colors in Flat Enamel, Semi-Gloss Enamel and Gloss Enamel. Several hundred of the colors in the Album of Custom Color can also be matched in Custom Color "Flow Kote" Rubber Base Wall Paint. Custom Tinting Colors can also be added to 42 Chalk Resistant White House Paint; "Dulux" Stucco, Shake and Shingle Paint; Tinting White and "Dulux" Trim and Shutter White to arrive at specific durable exterior colors. "Du-Lite" Enamel Gloss White: A high gloss, good hiding white finish coat. Resin Base: Soya-alkyd resin. Us e : For interior wall, ceiling and trim surfaces; for both commercial and residential work. "Du-Lite" Enamel Undercoat: A flat drying, good hiding first coat. Resin Base: Soya-linseed-alkyd resin. Us e : Interior wall, ceiling and trim surfaces; under "Dulux" Mill White Enamel Eggshell, "Du-Lite" Enamels and other interior finishes. "Du-Lite" Mill White Enamel Eggshell: A good hid ing, low eggshell mill white. Resin Base: Soya-alkyd resin. Us e: Only on walls and ceilings of industrial plants; not intended for use on trim. "DUCO" FINISHES "Duco" Clear Finish: A transparent, durable finish for woodwork, furniture and other interior surfaces. Not in tended for use on floors. Resin Base: Soya-alkyd resin. Us e: Interior woodwork, furniture and trim. "Duco" Gloss Enamel: Quick drying enamel with dura bility, good flow, excellent hiding power. Dries to handle in a few hours. New odorless formula. Resin Base: Soya-lin seed-alkyd resin. Us e: Finishing furniture, indoors and out. Interior woodwork and walls, especially in kitchens and baths. Lawn furniture. "Duco" Metal Primer: A quick drying, brown primer for use inside and outside on clean metal surfaces. Has good adhesion and filling properties. Resin Base: Chinawood-linseed-alkyd resin. Us e: For priming interior and "Dulux" Bulletin Enamels: Our highest quality enamel for sign painting. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior and interior signs. "Dulux" Fume Resistant High Hiding Maintenance White Gloss: Similar to "Dulux" High Hiding Mainte nance White Gloss Enamel but completely lead free for use on walls, ceilings and trim where resistance to discoloration from industrial fumes (hydrogen sulfide, sulfur dioxide, etc.) is required. Resin Base: Soya-alkyd resin. "Dulux" High Hiding Maintenance White Gloss Enamel: Similar to "Dulux" Maintenance White Gloss Enamel, but with increased hiding to provide one coat coverage over most previously finished interior surfaces. New odorless formula. Resin Base: Soya-alkyd resin. Us e: Interior ceilings and walls of industrial plants. Not in tended for use on trim. 34 DUP210010666 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes "Dulux" High Hiding Mildew Resistant Mainte nance White Gloss Enamel: Similar to "Dulux" High Hiding Maintenance White Gloss Enamel, but with un usual resistance to mildew and fungus growths. Resin Base: Soya-alkyd resin. Us e: Interior walls, ceilings of industrial plants, factories, institutions, etc. "Dulux" Maintenance White Gloss Enamel: Has ex cellent whiteness, retention of whiteness, durability and general all-round performance. New odorless formula. Resin Base: Soya-alkyd resin. Us e: Interior wails and ceilings of industrial plants, factories, institutions, etc. "Dulux" Mill White Enamel Eggshell: A high hiding low eggshell finish, for use only on walls and ceilings of industrial plants, factories, etc. Not intended for use on trim. Resin Base: Soya-alkyd resin. Us e: Interior walls and ceilings of industrial plants, factories, institutions, etc. "Dulux" "Ovalite" Enamel Undercoat: Our finest odorless undercoat for use with all types of architectural enamels--gloss, semi-gloss, eggshell and flat. Dries quickly. Sands easily; flows out so smoothly that little sanding is required. "Ovalite" may be intermixed with all types of enamels for varying degrees of gloss. May be tinted with "Harrison" Oil Colors. Resin Base: Soya-linseed-alkyd resin. Us e: As an undercoat for general interior use. "Dulux" Refrigerator Enamel: A high gloss white enamel formulated especially for brush application. Odor less formula. Resin Base: Soya-linseed-alkyd resin. Us e: While designed especially for refmishmg refrigerators, it is ideal for refinishing other appliances, cabinets, wood and metal trim and other interior surfaces. "Dulux" Refrigerator Enamel Undercoat: A white undercoat developed to be used over properly primed metal and under "Dulux" Refrigerator Enamel. Odorless formula. Resin Base: Soya-linseed-alkyd resin. Us e : As an undercoat under "Dulux" Refrigerator Enamel and other interior enamels. "Dulux" Super White Enamel: Available in three sheens: Gloss, Eggshell and Flat. Our finest interior white enamel made with odorless thinner. May be tinted to pastel shades with "Harrison" Oil Colors. Tough, durable, long wearing. Will withstand repeated washings. Resin Base: Soya-alkyd resin. Us e: Interior trim, walls, cabinets and other wood, plaster and primed metal surfaces. Mildew Resistant Enamel Undercoat: High resistance to mildew growths. Resin Base: Soya-alkyd resin. Us e: As an undercoat for "Dulux" High Hiding Mildew Resistant Maintenance White Gloss Enamel. Mildew Resisting Enamel--Oyster White: A high gloss, durable, oyster white enamel. Highly resistant to mildew growth. Resin Base: Soya-alkyd resin. Us e: In terior walls and ceilings of food processing plants under abnormal moisture conditions and where mildew control is important. Packinghouse Enamel White: A high gloss, durable white enamel, For use under abnormal moisture and damp conditions. Resin Base: Soya-alkyd resin. USE: Interior walls and ceilings. Porch and Floor Enamel: A quick drying, high gloss finish that will stand hard wear. Especially formulated so as not to show dust and dirt readily. Resin Base: Soyalinseed-alkyd resin. Us e: Exterior: porch floors, wood and concrete steps. Interior: wood floors, concrete floors that are dry and above grade. Sash and Screen Paint Black: An economical, quick drying black enamel which retards rust and subsequent screen staining. Suitable for all types of metal screening. Resin Base: Soya-linseed resin. Us e: On both wire screen and frames. Semi-Gloss Enamel White: Primarily intended for application by professional painters. Resin Base: Soyaalkyd resin. Us e: Interior: where an economical finishing coat is required. Walls, ceilings, trim, doors, cabinets, etc. "Tufcote" Heavy Duty Enamel: Extremely resistant to gasoline, oil or grease; quick drying. One coat is usually sufficient to cover previously painted surfaces. Colors match those of leading implement manufacturers. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior metal and wood: tractors, farm machinery, road equipment, wagons, tools, water pumps, wheelbarrows. FLAT WALL PAINTS AND SEALERS Primer-Sealer: A combined priming and sealing coat, for use on porous surfaces such as aged plaster, cement, con crete, brick, wallboard, etc. Prevents suction; holds out succeeding coats, creating a uniform surface. May be tinted with "Harrison" Oil Colors where colored topcoats are required. New odorless formula. Resin Base: Soyalinseed-alkyd resin. Us e: Prime coat on interior plaster, masonry, wallboard and similar porous surfaces. Sealer-Coater: A priming first-coater for two-coat-a-day painting systems. Dries rapidly to a dull luster. Brushes easily, has excellent hiding and sealing properties. No un pleasant odor. Resin Base: Vinyl emulsion. Us e: Prime coat on interior walls and ceilings, either unfinished or previously finished surfaces. "Speed Easy" Flat Wall Paint--White: An interior flat finish of the resin emulsion type. Made in semipaste form, requires reduction with water. Covers most surfaces in one coat, and dries so quickly that two coats may be applied the same day. No objectionable odor. Resin Base: Resin emulsion. Us e: Interior: walls and ceilings; over wallpaper, plaster, brick, acoustical tile, wallboard, ply wood, painted or unpainted surfaces. Stippling Flat: Primarily intended for application by pro fessional painters. For all forms of stippling and mottling. Made in white only, but may be tinted with "Harrison" Oil Colors. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "Town and Country" Flat White Enamel: New alkyd resin flat made especially for use by the Master Painter where a full bodied, washable interior flat is desired. Made only in white--may be tinted to any light color with "Harrison" Oil Colors. Processed with new odorless solvents for odor-free applications. Resin Base: Soya-linseed-alkyd resin. Us e: Interior walls and ceilings. "FLOW KOTE" "Flow Kote" Rubber Base Wall Paint: A washable rubber base emulsion wall and ceiling paint. Easy to apply 35 DUP210010667 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes with brush or roller coater. Dries in 30 minutes to a velvet like sheen. May be recoated in 3 to 4 hours. Shows no brush marks, laps or streaks. No disagreeable odor. Tough and durable. Unusually wear resistant. Us e: Aged bare plaster, wallboard, wallpaper, and previously finished surfaces. Acts as its own primer on most old or new surfaces. HOUSE PAINTS Barn and Roof Paint: A ready mixed, durable, bright red oxide paint for exterior surfaces. Resin Base: Linseed oil. Us e: Exterior use on barns, sheds, fences, etc. "Dulux" Stucco, Shake and Shingle Paint: A durable protective and decorative coating; seals the pores against moisture penetration; preserves the distinctive texture of original surfaces. The white is "self-cleaning" after a period of normal exposure; the colors are chalk resistant. Resin Base: Soya-alkyd resin. Us e: Exterior: brick, cement, concrete, plaster, stucco, cement-asbestos siding. "Dulux" Trim and Shutter Paint: For all outside trim work. Unusually resistant to mildew and fungus growths. Quick drying qualities minimize damage from dust and bugs. Resin Base: Soya-linseed-alkyd resin. Us e: Exterior wood: shutters, lawn furniture, trim, doors. Exterior primed metal: roofs, hand rails, fences, lamps, poles. "40" Outside White: Our highest quality white oil paint for use on structures which are painted all white. Use as white only; will fade if tinted. The combination of titanium pigments with other pigments results in a paint that is "self-cleaning" under normal exposure conditions. Easy brushing. Extra durable. Us e: Exterior wood: body and trim on houses, bams, outbuildings, fences. Exterior metal: when properly primed. Fume Resistant Outside White: Lead free in pigment and drier; will not discolor in contact with hydrogen sulfide fumes found in industrial areas. Similar to "40" Outside White in other respects. "Trutint" House Paint Colors: For long life and long lasting good appearance. Easy to apply. Excellent coverage and hiding. Us e: Exterior: body and trim of wood houses, bams and outbuildings; also on exterior metal trim which is properly primed. Deep colors intended only for trim purposes--shutters, blinds, doors, etc. 39 Wood Primer White: Ready mixed primer designed for use on bare wood and badly weathered painted surfaces before applying house paints. Not to be used as finishing coat. Us e : Exterior wood surfaces, body and trim when new or badly weathered. 41 One Coat White House Paint: Excellent hiding properties. Recommended for one coat application over previously painted white surfaces in good condition or primed new wood. "Self-cleaning" type especially for mulated for use on all-white houses. Do not tint. Us e: Exterior wood: body and trim on houses, barns, outbuild ings, fences, etc. Also on exterior metal which is properly primed. Us e: Exterior wood body and trim on houses, barns, out buildings, fences, etc. Also on exterior metal which is properly primed. Masonry Block Primer: A very heavy semipaste paint designed for interior and exterior use in filling the voids of masonry blocks. Designed for use as a first coater to be followed by conventional interior or exterior finish coats, or can be used without topcoats to provide a heavy duty finish. Resin Base: Linseed oil. Vinyl Masonry Paint: A vinyl emulsion coating. Its alkali resistance makes it an excellent finish for painted or unpainted stucco, cement, masonry, brick, asbestos shingles and siding, and asphalt composition shingles. No special primers are required. Resin Base: Polyvinyl acetate. MARINE FINISHES "Dulux" Marine Finishes: Quick drying; excellent durability; retain their gloss over long periods. The finishes include Yacht White Gloss, Semi-Gloss and Flat; Yacht Black; many attractive colors of Ship and Deck Finishes; Engine Enamels; Hard Racing Bottom Paints; Boot-Top ping Enamels; Metal Primer; Rich Mahogany Paste Wood Filler. The line also includes "Dulux" Clear Finish, "Dulux" Spar Finish and "Dulux" Clear Wood Primer. METAL FINISHES AND PRIMERS A great variety of primers are available for use in home and industry. While it is not practical to list all of them here, zinc chromates, red leads, primer-surfacers, zinc dust, heat resistant, etc., are included. Individually formulated for different metals such as: mill scale bearing steel, mill scale free steel, galvanized metal, copper, aluminum, stain less steel, and others. "Antoxide" Metal Primer, Black: Resin Base: Alkyd resin, linseed oil primer. Us e: Over rusted, hot rolled steel that has been hand cleaned. None of the conventional corrosion inhibiting materials are used. "Dulux" Galvanized Metal Primer: Designed especially for use as a prime coat for galvanized metal surfaces. Eliminates need for special treatment of galvanized metal. Can be used as a finish coat, if desired. Resin Base: Linseed-alkyd resin. Us e: Exterior and interior galvanized metal and copper surfaces. "Dulux" High Build Galvanized Transmission Tow er Paint: A high hiding, high build paint for galvanized metal. Since it possesses excellent qualities both as a metal primer and finish coat, it is ideally suited for one coat application to galvanized transmission towers. May also he used on copper and zinc. Resin Base: Linseed-alkyd resin. "Dulux" Metal Protective Paints and Metal Primer: Afford maximum protection to metal surfaces. Resin Base: Soya-linseed-alkyd resin. Us e: Interior: structural steel, tanks, girders and beams, doors, window frames and sash. Exterior: roofs, corrugated siding, tanks and supports, structural steel, bridges, doors, window frames and sash. 42 Chalk-Resistant White House Paint: Designed for (1) tinting with "Harrison" Oil Colors in producing special shades of house paint; (2) as a white to resist chalk staining of adjacent surfaces. Since it is slow-chalking, it does not have the "self-cleaning" properties of "40" Outside White. "Dulux" Tank Enamel White: An exceedingly white, durable, enamel type finish. Is "self-cleaning" under most conditions. Resin Base: Soya-alkyd resin. Us e : As a finish for the outside of exterior metal storage tanks to reduce in ternal temperature. Il ; 36 DUP210010668 FABRICS AND FINISHES DEPARTMENT FINISHES DIVISION: Trade Sales Finishes "Dulux" Thermal Gray: Similar to "Dulux" Galvanized Metal Primer but for use on interior and exterior metal surfaces subject to temperatures up to 500F. Resin Base: Linseed-alkyd resin. "Dulux" Zinc Chromate Primer: Highest quality zinc chromate type primer for ferrous metal. Yellowish brown in color. Resin Base: Soya-linseed-alkyd resin. Us e: For interior and exterior use on properly cleaned metal surfaces. itTMS!ack: A carbon bis and graphite paint combined with treated oils which dry to a glossy finish. Resists heat and actually bakes while in service. Withstands temperatures up to 450F. Us e: Clean metal surfaces subject to heat contact. No. 785 Metal Primer: A good quality general purpose red lead/iron oxide type dark brown metal primer. Us e: Exterior and interior metal surfaces. Sub-Marine Metal Primer: A zinc chromate-type primer for use on properly prepared ferrous metal subject to under water exposure or conditions of extreme moisture. Yellow ish brown in color. Resin Base: Chinawood oil, phenolic resin. Us e: Inside or outside on properly cleaned metal surfaces subject to continual moisture or dampness. OILS AND THINNERS "Dulux" 200 Thinner: A special petroleum distillate for use with "Duco" Enamels and Clear Finishes, "Dulux" Paints and Enamels and with other products as directed on labels. "Dulux" 27 Odorless Thinner: A new odorless thinner to be used only in those products where its use is specifically recommended on labels. "Dulux" 25 Reinforcing Oil: A synthetic clear reducing oil. Resin Base: Soya-alkyd resin. Us e: In reducing "Dulux" Exterior Finishes and Cement and Stucco Paint in accordance with directions. STAINS Oil Stain: A pigmented, flat drying stain in a linseed oil, rosin vehicle. Available in all popular shades. Us e: For staining all kinds of exterior and interior wood surfaces. Shingle Stain: A high grade, pigmented stain, using processed vegetable and creosote oils. Penetrates into the wood. Us e: Exterior shingle roofs and siding. "Tufcote" Varnish Stain: A high gloss, quick drying combination stain and varnish. Makes possible staining and varnishing in one operation. Highly resistant to marring. "Tufcote" Graining Ground is used when chang ing from a dark to a light surface. Resin Base: Phenolic resin, vegetable oil. Us e: Interior: floors, woodwork and furniture. "TUFCOTE" PAINTER--MAINTENANCE LINE This line of products is especially designed for use by professional painters. All products are supplied in white. They may be tinted with "Harrison" Oil Colors. Each item is designed for fast, easy application where a com mercial finish is required. VARNISHES "Dulux" Exterior Spar Varnish: Our highest quality exterior varnish; pale, high build, tough and elastic. Resin Base: Soya-alkyd resin. Us e : Doors, furniture and mis cellaneous small surfaces not fully exposed to the weather. Not recommended for siding and trim of houses. "Dulux" Interior Varnish: Our highest quality high gloss interior varnish. Pale in color, easy brushing, hard drying; excellent resistance to alkali, hot and cold water, and alcohol. Quick drying. Resin Base: Linseed, ester gum, phenolic resin. Us e: Floors, trim, bars and furniture. "Dulux" Satin Sheen Varnish: Highest quality rubbedeffect varr.ish. Produces a uniform low sheen of satin smoothness. Easy to apply. Free flowing. Unexcelled for mar and water resistance. Resin Base: Soya-alkyd resin. Us e: Interior trim, woodwork, wood paneling and furni ture. Exterior Spar Varnish: A full bodied, durable spar varnish of good quality, inexpensive and economical. Resin Base: Chinawood and soya oils, rosin. Us e: Doors, furniture and miscellaneous small wood surfaces not fully exposed to the weather. Not recommended for siding and trim of houses. Floor and Trim Varnish: A good quality, general purpose, high gloss clear finish. Resin Base: Rosin, tung, soya and linseed oils. Us e: Where an economical finish for interior floor and trim surfaces is required. Industrial Floor Finish: A high quality, high gloss clear topcoat for use over a previous application of Penetrating Wood Finish. The combination of these two products offers durability, long service, quickness and ease of cleaning. Resin Base: Linseed rosin modified phenolic resin. Us e: Gymnasium and industrial interior flooring where an extra durable clear finish is required. Penetrating Wood Finish: A penetrating sealer of great durability. Dries with a dull luster when completely wiped off; when only partially removed, it creates a tough, durable glossy film. Resin Base: Chinawood oil, phenolic resin. Us e: Interior wood floors, wood paneling, wood trim and furniture. Super Clear Varnish: A pale, high gloss varnish. Resists discoloration from contact with hot and cold water. Resin Base: Phenolic resin, rosin, tung and soya oils. Us e: In terior: wood floors, woodwork and trim. MISCELLANEOUS Flat Black Paint: Gives a smooth, nonglossy black finish. Us e: In photographic darkrooms and other interior surfaces where maximum light-absorbing "blackness" is desired. For imitating a wrought-iron effect on interior metal work, grilles, lamps and fireplace accessories. "Harrison" Oil Colors: Exceptional strength and purity of tone. Us e: Tinting paints and enamels. Paste Wood Filler: A natural color semipaste wood filler of excellent quality. Requires reduction with turpentine or mineral spirits for use. Us e: Filling the grain of interior or exterior open-grained wood surfaces; also recommended for marine work. Traffic Paint: Quick drying finishes for marking traffic lanes. Us e: Exterior street surfaces, interior floors of in dustrial plants for marking aisle boundaries for general traffic control. 37 DUP210010669 FILM DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES: Packaging Sales Atlanta 9, Georgia Boston 10, Massachusetts Chicago 3, Illinois Kansas City 5, Missouri New York 1, New York Philadelphia 3, Pennsylvania San Francisco 4, California Industrial Sales Chicago 3, Illinois New York 1, New York Pasadena 1, California (with Converter Sales) 1430 West Peachtree Street, N. W. 140 Federal Street 7 South Dearborn Street 1004 Baltimore Avenue Empire State Building, 350 Fifth Avenue 1616 Walnut Street 111 Sutter Street, Room 1018 7 South Dearborn Street Empire State Building, 350 Fifth Avenue 234 East Colorado Street, Room 426 TRinity 2-5828 HAncock 6-1711 ANdover 3-7000 GRand 1-6629 LOngacre 3-6400 Kingsley 5-4050 EXbrook 2-0808 ANdover 3-7000 LOngacre 3-6400 RYan 1-9696 EXPORT SALES OFFICE: Nemours Building Wilmington 98, Delaware PLANTS: Buffalo, New York Circleville, Ohio Clinton, Iowa WAREHOUSES: Los Angeles, California Columbia, Tennessee Old Hickory, Tennessee Richmond, Virginia Tecumseh, Kansas Oakland, California Seattle, Washington PRODUCTS Acetate Film: A highly transparent film with good dimensional stability, produced from cellulose acetate resin. It is grease-, oil-, dust- and air-proof. KINDS: Rigid (CA-43) and flexible (CA-48). t h ic k n e s s e s : From 0.00088 in. to 0.0020 in., with yields of 25,000 to 11,000 sq. in. per lb. Us e: Principally for laminations, foliation, document pres ervation, pressure sensitive tape; magnetic sound record ing tape; window cartons and envelopes; packaging of items, such as textiles, paper specialties, etc. AVAILABLE FORMS: Supplied by DuPont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from 1)4> in. to 48 in. Cut-tosize sheets are prepared according to specifications in dimensions up to 40 x 48 in. Supplied in forms other than unprinted rolls and cut-to-size sheets by converters and fabricators, names of whom will be supplied upon request. 38 Cellophane: ' KINDS: Basic film types include plain and moistureproof in a number of grades to meet the packaging requirements for many products. All types are transparent, strong, flexible, highly resistant to grease, oil and air and are efficient for high speed machine wrapping. Newest ad dition to the line are the K polymer coated types. They provide superior appearance, smoothness, moisture pro tection and durability, and are highly resistant to oil and grease. They are designed for use on a wide variety of products, including baked foods, cookies, potato chips, and candies. One type of K film is non-fogging and opens up unusual packaging possibilities for frozen baked goods and other frozen foods. t h ic k n e s s e s : From 0.0009 in. to 0.0017 in., with yields of 21,500 to 11,600 sq. in. per lb. Us f .: Cellophane is used as a wrapper or bag to provide protective packages with maximum visibility of product and good merchandising qualities. Other uses include fabri- DUP210010670 FILM DEPARTMENT cated articles and industrial applications. Some of the major uses are: Plain (non-moistureproof)--Paper, textiles, powder box covers, dried vegetables, paste goods, pressure sensitive tape and other fabricated articles. Moistureproof (non-heat sealing)--Cigars, cigarettes, candy, cheese. Moistureproof Heat Sealing--Bakery products, fresh meats, nuts, potato chips, dried fruit, frozen food, dairy products, cereals, candy, drugs, medical sup plies, hardware, textiles. Semimoistureproof--Fresh fruits and vegetables, luncheon meats, milk bottle hoods. a v a il a b l e f o r ms : Supplied by DuPont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from 1)4 to approximately 46 in. Cut-to-size sheets are prepared according to specifications in dimensions up to approximately 40 x 50 in. Supplied in printed bags, rolls, sheets and other forms by authorized converters and fabricators, names of whom will be supplied upon request. "Mylar" Polyester Film: An exceptionally strong, dura ble, transparent film with an unusual balance of properties that suit it to many electrical, industrial and packaging uses. It has high tensile, tear and impact strength, is inert to water, is water vapor resistant and is unaffected by and does not transmit oils, greases and volatile aromatics. It retains these properties and remains flexible and stable from --80F. to over 300F. k in d s : Six available types include general purpose film suitable for electrical and other industrial applications; weatherable film for outdoor applications; heat sealing and heat shrinkable films for packaging. t h ic k n e s s e s : From 0.00025 in. to .010 in., with yields from 80,000 to 2,000 sq. in. per lb. Us es : "Mylar" is suited to a wide range of applications: ELECTRICAL Dielectric in capacitors; slot liners and phase insulation for motors; tape insulation for motor and generator field coils; insulation for magnet wire; a barrier and insulating tape in cable constructions; insulation between turns in transformer coils; backing for mica. OTHER INDUSTRIAL USES Base for magnetic recording tape and other specialty tapes; base for metallic yarns; base for metalizing, decora tive laminations; surfacing material for paneling and acoustical tile; separator sheet for reinforced plastics; cartography film base; roll leaf base; decals; water vapor barriers; apparel stays; various stationery uses such as book covers, page protectors, display folders and index cards. Weatherable form provides low cost outdoor con struction and glazing material. PACKAGING General packaging and wrapping, bundling, window boxes, bags, laminations, base for special coated films, heat shrinkable skin-tight packages for smoked meats, poultry and cheese. a v ail a b l e FORMS: Supplied in rolls and cut-to-size sheets. Rolls are slit in 1/16-in. multiples, standard widths from J4 in. to approximately 5534 in. Cut-tosize sheets are prepared according to specifications in dimensions up to approximately 43 x 43 in. "TEFLON" PEP-FLUOROCARBON FiLiVi An impermeable, heat sealable film produced by melt extrusion of "Teflon" 100-X FEP-Fluorocarbon resin. The film is unaffected by all solvents and practically all chemicals; has outstanding electrical properties; is capable of continuous service at 400F. ; can be heat formed to fit complex shapes and can be heat bonded under pressure to many metals; has good low temperature toughness, excel lent antistick properties; can be treated to make it receptive to conventional adhesives. "Teflon" FEP-Fluorocarbon film is presently available in development quantities, with commercial production scheduled for early 1960. The anticipated uses for the film are in equipment and shipping container linings, printed wiring and flexible cable, capacitors, wire and cable and aircraft fuel cells. "Cel-O-Seal" Cellulose Bands: Are regenerated cellu lose; odorless, non-combustible, harmless; resistant to oils, fats, dirt and dilute acids. STYLES AND s iz e s : Furnished in a wide range of sizes as: transparent, opaque, metallic and "Wind-O-Band" seals. May be obtained in black, white or a wide variety of standard colors. Beautiful private designs can also be produced. Widely used for sealing closures on foods, drugs, beverages, chemicals and other bottled products. Bands may be hand- or machine-applied. Regularly shipped in a wet state, ready to use directly from containers. "w in d -o -b a n d " c e l l u l o s e s ea l s : For the distilled spirits industry to provide decorative and positive package sealing and Federal tax stamp protection. Officially approved by the U. S. Treasury Department for use over Government strip stamps. They are sold only to licensed bottlers of distilled spirits and other manufacturers who place U. S. Tax Stamps on their products. Cellulose Sponge: Highly absorbent, soft and resilient when wet, long-lasting. It will not scratch, can be sterilized by boiling, not affected by ordinary cleaning compounds. Fine and coarse pore types are available. Us e: Com mercially for many purposes, such as washing walls and painted surfaces, windows, etc.; in the home, for washing dishes, general cleaning and in the bath. a v ail a b l e f o r ms : Handy sizes in the regular buff shade for general cleaning purposes and in various pastel shades for use in the home. Also cut to specified sizes for converters, or specialized industrial uses. Standard size, packaged sponges are sold by Film De partment to grocery, drug, variety store, sanitary supply outlets, through brokers. Fabrics and Finishes Depart ment, Specialties Sales, sells to automotive and hardware trades (See Page 30). Fine pore packaged sponges for 39 DUP210010671 FILM DEPARTMENT photographic use are sold by Photo Products Depart ment (See Page 69). Special sizes for converters and industrial users are also sold by Film Department. "TURTLEBACK" c ar w a s h in g s p o n g e : A sponge par ticularly designed for use in washing automobiles and trucks. "Combo" Synthetic Sponge: Multi purpose, two sided sponge that scrubs and scours on one side, absorbs and wipes on the other. Special abrasive, nonscratching poly urethane half does the scrubbing--conventional cellulose half performs normal wiping function. Cellulose Sponge Yarn: Cotton yam core covered with cellulose sponge. Wound on ball multiple-end warps and single-end spools. Available in 34 in- (buff or green) and 34 in. (green only) diameters. Us e: For converter use in manufacture of household and industrial wet mops, and for weaving into cloths, pads, coaster mats, etc. r DUP210010672 GRASSELLI CHEMICALS DEPARTMENT GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES--INDUSTRIAL CHEMICALS: Atlanta 8, Georgia Boston 10, Massachusetts Chicago 32, Illinois Cincinnati 2, Ohio Cleveland 14, Ohio Detroit 35, Michigan Houston 25, Texas Milwaukee 13, Wisconsin Minneapolis 2, Minnesota New Haven 13, Connecticut New York 1, New York Philadelphia, Pennsylvania Pittsburgh 19, Pennsylvania St. Louis 5, Missouri 739 West Peachtree Street 140 Federal Street 4251 South Crawford Avenue 603 Terrace Hilton Building 1321 National City Bank Building 13000 West Seven Mile Road 1100 East Holcombe Boulevard 6500 West State Street 1207 Foshay Tower 46 River Street 350 Fifth Avenue 308 East Lancaster Avenue, Wynnewood, Penna. 1715 Grant Building 10 South Brentwood Boulevard, Clayton TRinity 6-1586 HAncock 6-1711 CLiffside 4-7676 CHerry 1-4570 MAin 1-6460 UNiversity 4-1963 JAckson 9-4227 SPring 4-4850 FEderal 5-4181 LOcust 2-5145 LOngacre 3-6456 TRinity 8-2700 GRant 1-5427 Volunteer 1-3155 DISTRICT OFFICES--BIOLOGICAL CHEMICALS: Atlanta 8, Georgia Chicago 32, Illinois Cleveland 14, Ohio Houston 25, Texas Minneapolis 2, Minnesota Palo Alto, California Philadelphia, Pennsylvania 739 West Peachtree Street 4251 South Crawford Avenue 1321 National City Bank Building 1100 East Holcombe Boulevard 1207 Foshay Tower 701 Welch Road 308 East Lancaster Avenue, Wynnewood, Penna. TRinity 6-1586 CLiffside 4-7676 MAin 1-6460 JAckson 9-4227 FEderal 5-4181 DAvenport 6-6044 TRinity 8-2700 PLANTS: Cleveland, Ohio East Chicago, Indiana Ecorse, Michigan Fortville, Indiana La Porte, Texas (Houston) Linden, New Jersey (Grasselli) North Bend, Ohio (Fort Hill) Philadelphia, Pennsylvania Richmond, Virginia (James River) Wurtland, Kentucky PRODUCTS In d ic a t e s Re s a l e Pr o d u c t s INDUSTRIAL CHEMICALS Acetic Acid--Glacial--Reagent (Ethanoic Acid, Vin egar Acid)--CHsCOOH: Clear colorless liquid with pun gent odor; crystallizes to a solid at 60F. (15.6C.); soluble in water, alcohol and ether; Sp. Gr. 1.048; B. P. 117.8C. Us e: As a reagent in chemical analysis or where an espe cially high purity acid is required. Co n t a in e r s : 1- and 5-pt., 6)4- and 13-gal. carboys. Adhesives No. 60, No. 77, No. 78 and No. 78X: Vinyl resin base white powders; soluble in water at elevated temperatures and with proper agitation, Us e: As an ad hesive for laminated paperboard. The bond made between flat surfaces of paperboard withstands long exposure to water without ply separation. Co n t ain e r s : 50-lb. paper bags. *Alum, Ammonium: (See Aluminum Ammonium Sulfate, this page). Alum--Iron Free: (See Aluminum Sulfate--Iron Free, Page 42). ''`Alum, Potash: (See Aluminum Potassium Sulfate, Page 42). *Aluminum Ammonium Sulfate--N. F. and Tech nical (Ammonium Alum, Crystal Alum) -- (NH4)2S04-AI2(S04)3-24H20 : Clear colorless crystals, lump, granules or powder; soluble in water and glycerin; in soluble in alcohol. Us e: In leather and fur tanning; baking powder; printing and dyeing fabrics; in pharmaceuticals and styptic products; for brining of pickles. Co n t a in e r s : 100-lb. paper bags, 100-lb., 325-lb. and 400-lb. fiber drums. DUP210010673 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS alcohol and ether. Solution: 50% AICI3'GB^O in water. Clear, water white, corrosive liquid; miscible with water, alcohol and ether; gravity 32 Be. Us e; In photographic fixing baths; in manufacture of dry colors, aluminum hydroxide gel, and roofing granules. Co n t a in e r s : Crys tals--300-lb. polyethylene-lined fiber drums. Solution-- 135-lb. carboys, tank cars and tank trucks. Ammonium Sulfamate--NH4SQ3NH2: White, crystal line, hygroscopic solid; extremely soluble in water; moder ately soluble in glycerin, glycol and formamide. Us e: For retarding flame in textiles and paper products (See "CM" Flame Retardant, Page 43 and "X-12" Flame Retardant, Page 49); in electroplating solutions. Co n t ain e r s : 50-lb. fiber drums, 100-lb. paper bags. Aluminum Complex 101--Technical: A Werner type aluminum complex in isopropanol. Us e: As a water re pellent and sizing treatment for paper, textiles and other materials; for treatment of leather, masonry and other negatively charged surfaces; and for insolubilizing various water soluble or swellable coatings. Co n t a in e r s ; 6J4-gal. carboys. Ammonium Sulfate--Technical--(NH.riSO.: White crystalline material; very soluble in water; insoluble in alcohol; decomposes at 100C. Us e: As a nutrient in pro duction of yeast, as a flame retardant for wood, textiles, etc.; for ammonia-chlorine disinfection of water; as an ingredient in cleaning compounds and electroplating solu tions; in dyeing textiles and manufacture of ammonium `Aluminum Potassium Sulfate--N. F. and Technical (Potassium Alum, Potash Alum)--KaSO^-Al^SO^s- salts; not for fertilizer use. Co n t a in e r s : 100-lb. paper bags, bulk. 24HsO: Clear, colorless crystals, lump, granules or powder; soluble in water; insoluble in alcohol; M. P 92C. Us e: In Anisole--Technical (Phenyl Methyl Ether) -- manufacture of photographic film hardeners, pharmaceuti Ce H 5 0 C H3: A clear mobile liquid with a light ethereal odor, cals, as a tanning agent. Co n t a in e r s ; 100-lb. paper bags, 100-lb., 350-lb. and 400-lb. fiber drums. insoluble in water, soluble in alcohol and ether. B. P. 153.8C.; F. P. --37.3C. Us e: As a chemical intermediate in alkylation, acylation, halogenation and nitration re `Aluminum Stearate--Technical--AI(Ci3H3302)3: A white to yellow amorphous powder; insoluble in water; slightly soluble in alcohol; soluble in petroleum, alkalies and turpentine oil. Us e: In manufacture of cutting and lubricating compounds, as a paint and varnish drier. Co n actions; as a solvent reaction medium; as a heat transfer medium. Anisole has high heat stability, high flash point, low vapor pressure and low order of toxicity. Co n t ain e r s : 5- and 55-gal. drums, tank cars, and tank trucks. t a in er s ; 50-lb. cartons. Aqua Ammonia 26 U. S. P. (Ammonium Hydroxide, Aluminum Sulfate--Iron Free--Technical -- AI3(SO4)3-18H80 : White lumps or granules; soluble in water; insoluble in alcohol. Us e: In manufacture of alumi num soaps, printing inks and lake colors; in tanning of white leather; in sizing and coating of paper. Co n t ain e r s : 100-lb. bags. Ammonia Hydrate)--NH4OH: Clear, colorless solution, characterized by sharp, penetrating ammonia odor. Sp. Gr. approximately 0.9; F. P. below --40C.; 26 Be., 29.4% NH3. Us e: As an emulsion stabilizer; in the manufacture of ammonium salt3 and cuprammonium rayon; in house hold ammonia water; in textile scouring, dyeing and mildew-proofing; for glass cleaning in manufacture of `Ammonium Alum: (See Aluminum Ammonium Sul fate, Page 41.) mirrors; in saponifying fats and oils; for yeast foods; in manufacture of ink, varnishes, soap, resins, rubber and leather; in electroplating and photoengraving. Co n Ammonium Chloride--Technical (Chloride of Am t a in e r s : 9'6-lb. carboys, 385-lb. steel drums, tank trucks. monia, Sal Ammoniac, Muriate of Ammonia) -- NH4CI: Granular and crystals; soluble in water and glycerin; slightly soluble in alcohol; sublimes when strongly Aqua Fortis: (See Nitric Add, Page 45.) heated; Sp. Gr. approximately 1.53. Us e: As a flux for hot dip galvanizing sheet steel and other steel products; as a Auxin the electrolytic refining of zinc. Co n t ain er s : 100-lb. paper bags, 300-lb. fiber drums. `Barium Carbonate--Ceramic Technical--BaC03: White powder; insoluble in water and alcohol; soluble in acids which form water soluble barium salts and in am monium salt solutions; fuses at approximately 1350C. `Ammonium Chloride--White Fines Technical (Chloride of Ammonia, Sal Ammoniac, Muriate of Ammonia)--NH4CI: White, crystalline powder; soluble with loss of CO2. Us e: In manufacture of ceramics and bricks (prevention of efflorescence); in paper coatings. Co n t a in e r s : 50-lb. bags. in water and glycerol; Sp. Gr. 1.52; sublimes when strongly heated. Us e : As an ingredient in dry batteries and cells; in galvanizing fluxes; in the manufacture of leather; in manu facture of roofing granules. Co n t ain e r s : 100-lb. bags, 275-lb. bbl. Battery Acid (Electrolyte Acid, Storage Battery Acid, Sulfuric Acid)--H2S04: Clear, colorless, corrosive liquid available generally at Sp. Gr. 1.835. Inquiries for special strengths are invited. Us e: As electrolyte in lead type storage batteries. Co n t ain e r s : 130- to 200-lb. glass car Ammonium Hydroxide--Reagent (Aqua Ammonia, boys, tank cars, and tank trucks. Ammonium Hydrate)--NH4OH: Clear, colorless solu tion with pungent odor; Sp. Gr. approximately 0.9; F. P. `Borax--U. S. P. and Technical (Sodium Borate, below --40C.; 27--30% NH3. Us e: As a reagent in chemical Sodium Tetraborate)--Na.BiO/'lOHjO: White granules analysis where especially high purity is required. Co n or powder; soluble in water and glycerin; aqueous solution t a in er s : 1- and 5-pt. bottles, 6)^- and 13-gal. carboys. mildly alkaline; M. P. 75C. Us e: In manufacture of glass Ammonium Hydroxide: (See Aqua Ammonia 26U. S. P., this page.) and vitreous enamels, borax soaps, washing powders, ceramic products and detergents, as a preservative and mild antiseptic. Co n t a in e r s : 100-lb. bags. I I.i] 42 DUP210010674 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS *CaIcium Stearate--Technical--Ca(Ci3H3502)2:White, amorphous powder; insoluble in water; soluble in petroleum solvents. Us e : As a waterproofing agent for textiles, wood, concrete, plastics, etc. Co n t a in e r s : SO-lb. cartons. *Caustic Potash: (See Potassium Hydroxide, Page 46.) ^Caustic Soda: (See Sodium Hydroxide, Page 47.) Chlorosulfonic Acid--Technical--CIS03H; Clear, col orless to light straw colored, oily, fuming, corrosive liquid with pungent odor; decomposed by water or alcohol; Sp. Gr. approximately 1.75; F. P. below --37C.; B. P. 154C.; minimum 98.5% C1S03H. Us e : In sulfation and sulfonation of organic compounds for manufacture of sulfonated oils, intermediates for dyes and pharmaceuticals, pesticides, detergents and ion exchange resins; for production of anhydrous HC1 and smoke-producing chemicals. Co n t a in e r s : 700-lb. steel or stainless steel drums, tank cars, and tank trucks. "CM" Flame Retardant: Fine, white, granular compo sition based on ammonium sulfamate and modified to pre vent afterglow and to improve penetration. Soluble in water; insoluble in the common dry cleaning solvents. (See Ammonium Sulfamate, Page 42 and "X-12" Flame Retar dant, Page 49.) Us e : In flame retardanttreatment of fabrics, paper, paper products and other cellulosic materials. Co n t a in e r s : 50-lb. fiber drums, 100-lb. paper bags. *Copper Sulfate--Technical (Cupric Sulfate, Blue Vitriol, Bluestone)--CuS04'5H2Q: Blue, crystalline, granular or powdered material; soluble in water and alcohol; effloresces in dry air; Sp. Gr. 2.286. Us e : As a germicide; in manufacture of stock powders; in the drawing of wire; in compositions for wood preserving. Co n t a in e r s : 100-lb. bags. * Copperas: (See Ferrous Sulfate, this page.) Copperized CZC Chromated Zinc Chloride--Tech nical--CuCI2, ZnCI2 and Na2Cr207: Granular material with slight brownish color or 50% water solution. A compan ion product to CZC chromated zinc chloride forwood preser vation. Possesses increased and exceptional preservation value and termite repellency and the treated wood is clean, odorless, paintable and flame retardant. Co n t a in e r s : Dry --50- and 575-lb. drums. Solution--Tank cars. CZC Chromated Zinc Chloride--Technical--ZnCh and Na2Crs07: Granular material with slight brownish color or 50% water solution. Solution: Gravity about 51.7 Be.; F. P. --37.2C. Us e : For preserving wood against decay, termite attack and for application as a flame re tardant. Treated lumber is clean, odorless, paintable, safe to handle and flame retardant. Co n t a in e r s : Dry--50and 625-lb. drums. Solution--Tank cars.* *Diatomaceous Earth--Technical--Si08: Finely di vided, water insoluble powder. Us e : As an anti-caking agent in dyes, detergents, ammonium nitrate, etc.; as a conditioning agent and extender in superphosphate-based fertilizers, insecticidal dusts; as a pigment extender and flatting agent in paints; as an abrasive in polishes; as a filler in molded plastics and rubber; as a pigment extender and for pitch and slime control in paper making, improves drainage, permits faster machine speeds, improves reten tion of pigments; as a filler in asphalt products, such as roofing, floor tile, and battery boxes. Co n t a in er s : 50-lb. bags in carloads. Dimethylamine--DMA--Anhydrous and Aqueous Solutions--Technical--(CH3)sNH: Anhydrous--color less gas, clear and water white when liquefied. Us e: In termediate in the manufacture of rubber accelerators and quaternary compounds; in manufacture of pharmaceutical intermediates, fungicides and herbicides; as a dehairing agent in leather processing; in manufacture of solvents and rocket fuels. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solution--55-gal. drums, tank cars and tank trucks. DMF--Dimethyl Formamide--Technical-- HCON(CHs)2: Colorless liquid; B. P. 153C.; F. P.--61C. ; Sp. Gr. 0.953; miscible with water and common organic solvents. Us e: As a solvent for vinyl resins in lacquers, films and printing inks, for pigments, dyes, inorganic salts and in paint removers; as a reaction medium in dyes and synthetic chemicals industries; as a selective refining sol vent for acetylene, acid gases and petroleum constituents. Co n t a in e r s : 5- and 55-gal. drums, tank trucks, tank cars. *Disodium Phosphate: (See Sodium Phosphate--Di, Page 47.) "Duclean" No. 1 Inhibited Sulfuric Acid--Technical (60 Be. Sulfuric Acid Containing an Acid Pickling Inhibitor): Clear, reddish-brown liquid; miscible with water; Sp. Gr. 1.706; F. P. below --10.8C. Us e: In pickling iron and steel; for descaling and cleaning of steel and other metals under conditions where it is desirable to inhibit the acid corrosion of steel and ferrous alloys. Co n t a in e r s : 185-lb. glass carboys, 700-lb. drums, tank cars, and tank trucks. "Duclean" No. 2 Hydrochloric Acid Solution In hibited--Technical: Clear, water white liquid with pungent odor; miscible with water; Sp. Gr. 1.142; F. P. below --40C. Us e: In pickling iron and steel; for removing deposits, including hard water scale, hydrated iron and rust from evaporators, condensers, water distributing lines, water well screens, etc., where it is important to inhibit acid corrosion of steel and other ferrous metals. Co n t ain er s : 125-lb. glass carboys, tank cars, and tank trucks. Engraver's Acid: (See Nitric Acid--Technical and En graver's Quality, Page 45.) ''Epsom Salt: (See Magnesium Sulfate, Page 45.) *Ferrous Sulfate--Technical (Copperas, Green Vit riol, Iron Sulfate)--FeSO,7H.O: Bluish-green crystals, granular or powdered material; soluble in water; insoluble in alcohol; Sp. Gr. 1.898; M. P. 64C. Us e: In manufacture of iron salts, pigments, dry colors, indigo dyes; as a mordant in dyeing and printing textiles; for purification processes in gas, sewage and water plants; in manufacture of brick. Co n t a in e r s : 100- and 200-lb. bags, 300- to 400-lb. bbl., bulk. Flame Retardants: (See Ammonium Sulfamate, Page 42, "CM" Flame Retardant, this page, and "X-12" Flame Retardant, Page 49.) 43 DUP210010675 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Flux, Galvanizing: (See Zinc Ammonium Chloride, Page 49 and Ammonium Chloride, Page 42.) Flux, Soldering--"Eureka" Soldering Flux Crystal --Zinc Chloride + Ammonium Chloride: White, crys talline powder; soluble in water. Us e: As a flux in soft soldering operations and preparation of liquid soldering fluxes. Co n t a in er s : 50- and 600-lb. steel drums. Flux, Suiuvniig--"Kieanroi" Soldering i*i*u x Crystal --Zinc Chloride + Ammonium Chloride: White, crys talline powder. Us e : As a solder blanket flux in automatic soldering of side-seams in manufacture of tinned containers. Co n t ain e r s : 50- and 500-lb. drums. Fluxes, Soldering Liquid--Triple "Eureka" and "Eureka" Soldering Flux: Clear, colorless water solu tions based on zinc chloride and containing other ingredi ents. Various gravities and compositions. Us e: General soft soldering and solder and lead-coating fluxes for use in the automotive, can, refrigeration, wire and other in dustries. Co n t a in er s : 145-lb. carboys, 605-lb. drums. Fluxes, Tinning--Standard and "High Speed" Tin ning Flux 50: Clear, colorless water solution of zinc chloride and ammonium chloride; Sp. Gr. 1.526; F. P. be low --50F. Us e: As fluxing solutions in manufacture of tin plate, terne plate, tin strips, dairy equipment, refriger ator trays, automobile radiators, wire goods, etc. CON TAINERS: 165-lb. carboys, 670-lb. drums. Formic Acid--Technical (Methanoic Acid)--HCOOH in Water Solution: Colorless liquid with irritating and penetrating odor; soluble in water, alcohol, ether and glycerin. 85% St r e n g t h 90% St r e n g t h Sp. Gr. F. P. 1.201 9F. 1.210 24F. Us e: In dyeing, printing and finishing of textiles; in manu facture of formates, fat and oil hydrogenation catalysts, synthetic camphor, pharmaceutical intermediates, sol vents; for dyeing and deliming in tanning leather; manu facture of vinyl resin plasticizers; in electroplating; for coagulation of rubber latex. Co n t a in e r s : 125- and 127-lb. carboys, 515- and 525-lb. drums, tank cars, and tank trucks. Fungicides, Industrial: (See IN-2555 Fungicide, this page.) "G-942" Tanning Agent: An aqueous solution of the partial sodium salt of a polymeric carboxylic acid. Us e: In processing light-weight skins for the production of high grade suede and grain leathers. Excellent properties for white clear through leathers. Possesses high skin-plumping ability. Co n t ain e r s : 500-lb. drums. "G. B. S." Globular Sodium Bisulfate--Technical: (See Sodium Bisulfate, Page 47.) Hydrochloric Acid--Reagent--36-5 to 38% HCI in Water Solution: Clear colorless fuming corrosive liquid with pungent odor; soluble in water, alcohol and ether; Sp. Gr. Min. 1.1854, Max. 1.1923; F. P. below --24F. 44 (--31.1C.). Us e: For reagent or analytical purposes, or where hydrochloric acid of extremely high purity is re quired; in manufacture of food products. Co n t a in e r s : 1- and 5-pt. bottles, 6)4- and 13-gal. carboys, tank trucks, tank cars. Hydrochloric Acid--Technical and Food Processing (Muriatic Acid, Chlorohydric Acid, Hydrogen Chlo ride)--HCI in Water Solution AOV r'FsIrjT'lftC-g QT- ish corrosive liquid with pungent odor; miscible with water and alcohol. Gr a d e Sp . Gr . %HC1 F. P. Be l o w 18 BA 20 BA 22 BA 23 BA 1.142 1.160 1.179 1.189 27.92 31.45 35.21 37.14 --40F. --40F. --40F. --40F. Us e: In metal pickling and descaling; in manufacture of inorganic and organic chlorides, chlorinated synthetic resins and plastics; in the food industry for the hydrolysis of protein and starch, inversion of sugar and manufacture of edible gelatin; in carbonizing wool and as a bleaching and dyeing assistant in the textile industry; as a prefluxing agent for galvanizing and soldering; in the paper industry for cleaning and scouring wires, screens and felts; for re covery of glycerin in the manufacture of soap; in the puri fication of sand and clay; in deliming, tanning and dyeing of leathers; for etching aluminum. Co n t a in e r s : 125- to 130-lb. carboys, tank cars, and tank trucks. Hydrochloric Acid, Inhibited: (See "Duclean" No. 2 Inhibited Hydrochloric Acid, Page 43.) '"Hydrofluoric Acid--Technical--HF in Water Solu tion: Clear colorless fuming liquid; attacks iron, glass and ceramic ware. F. P. St r e n g t h Sp . Gr . Be l o w 70% 1.258 --94.3F. Us e: As a pickling agent for stainless steels and for the removal of silica and siliceous scales from cast iron and steel products; in manufacture of alkylation catalysts, re frigerants, fluorides and acid fluorides; for etching and frosting glass. Co n t ain er s : 20-, 55-, and 110-gal. steel drums, tank cars. SN-2555 Fungicide: 10% solution of phenyl mercury oleate in mineral spirits. Us e : As a fungicide for paints and mill-work. Co n t a in e r s : 5-gal. cans, 55-gal. drums. *lron Sulfate: (See Ferrous Sulfate, Page 43.) Lactic Acid--Technical, Food Processing and Plastics (Alpha-Hydroxypropionic Acid)--CH3CHOHCOOH in Water Solution: Various strengths; clear, colorless to dark brown, syrupy liquid; miscible with water and alcohol. Us e: In manufacture of phenolic plastics, lactates, and emulsifiers; anti-perspirants; as a delimer, plumping agent and acidulant in vegetable tanning of leather, and in manu facture of synthetic tanning compounds; as a mordant and assistant in textile dyeing and finishing; in brewing; as an DUP21001067 6 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS acidulating agent in manufacture of processed cheeses, pickles, olives, pectin, carbonated beverages, jams, jellies, infant foods. CONTAINERS: 120-lb. carboys, 440- to 465-lb. bbl., tank cars, and tank trucks. Lactic Acid--U. S. P. (Alpha-Hydroxypropionic Acid --85%) CH3CHOHCOOH in Water Solution: Clear, colorless, syrupy liquid; optically inactive; soluble in water, alcohol and ether; insoluble in benzol and carbon disulfide; F. P. approximately --40F. (--40C.). Us e: In manu facture of pharmaceuticals and chemicals. Co n t a in e r s : 120-lb. carboys. "Lignasan" X Fungicide: A blue powder containing ethyl mercury phosphate. Us e: In the pulp and paper in dustry for slime control and pulp preservation; as a pre servative for paper sizes. Co n t a in e r s : 4-o z. envelopes, packed in 50-lb. drums; 125-lb. drums in bulk. "Ludox" HS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% Si02. Ratio, wt, Na20:Si02, 1:95; pH at 25C. 9.65 to 10.15; F. F. 32F. (0C.). Us e: For antislip treatment of rayon, cotton, and wool staple for improved yarn strength; compounding and post-dip treatment of latex foams and films to improve modulus and effect rubber savings; modifying latex ad hesives for improved bond strengths; for increased hardness and slip resistance in emulsion floor waxes; improved water and heat resistance of adhesive coatings and fibrous struc tures; for antisoil treatment of pile fabrics and miscel laneous substrates; frictionizing agent for paper; binder for inorganic materials; precoating photo sensitized paper for color contrast. Co n t a in e r s : 55-gal. drums, tank trucks, and tank cars. "Ludox" LS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% SiOs. Ratio, wt., Na20:Si02, 1:285; pH at 25C. 8.2 to 8.7; F. P. 32F. (0C.). Us e: See "Ludox" HS Colloidal Silica, above. Co n t a in e r s ; 55-gal. drums, tank trucks, and tank cars. "Ludox" SM Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 15% SiOa charac terized by extremely small particle size averaging only 7 millimicrons. Ratio, wt., Na20:Si02, 1:159; pH at 25C. 8.1; F. P. 32F. (0C.). Us e: Binder for inorganic fibrous ma terials; antisoil applications to smooth surfaces; paper coatings to improve abrasion resistance, printability and other properties; latex adhesive compositions for improved adhesion, etc. Co n t a in e r s : 55-gal. drums. ^Magnesium Sulfate--Stock Food Grade (Epsom Salt)--IMgS04-7H2O : Small, colorless, needle-shaped crys tals. Us e: As an ingredient in stock food remedies. CON TAINERS: 100-lb. bags in carloads and truckloads only. ^Magnesium Sulfate--Technical (Epsom Sait)-- MgS04'7H20 : Small, colorless needles with a bitter, saline taste; soluble in water, alcohol and glycerin; Sp. Gr. 1.68. Us e: In the manufacture of leather, rayon, magnesia cements, stucco and mineral flooring, ceramics, and paper sizes; as an ingredient in stock powders. Co n t ain e r s : 100lb. bags in carloads and truckloads only. ^Magnesium Sulfate--U. S. P., Recrystallized (Epsom Salt)--MgSOi>7H20 : White, uniform needle-shaped crys tals; soluble in water, alcohol and glycerin. Us e; As a medicinal agent in general and veterinary practice; in pharmaceutical products. Co n t a in e r s : Cases (12 five-lb. cartons), 100 lb. bags in carloads and truckloads only. Mineral Adhesive Solution--Technical: Amineralbase adhesive modified to obtain rapid wetting and good ad hesion. Us e: For bonding metal foil to paper; for bonding insulating materials to metal. Co n t a in e r s : 55-gal. drums, tank cars. Monomethylamine--Anhydrous and Aqueous Solu tions--CH3NH2: Anhydrous--colorless gas, clear and water white when liquefied. Us e: In the manufacture of pharmaceutical intermediates for the xanthine alkaloids, theophylline, caffeine, the sympathomimetic drugs such as ephedrine, and the analgesic meperidine; in manufacture of surface active agents; photographic developers; dyes; in manufacture of soil fumigants and fungicides for agri culture. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solutions--55-gal. drums, tank trucks, tank cars. Muriatic Acid: (See Hydrochloric Add--Technical, Page 44.) Muriatic Acid, Inhibited: (See "Duclean"No. 2 Hydro chloric Add Solution Inhibited--Technical, Page 43.) "NC" Soil Compound (Chloronitrotoluene) -- C7H11NO2CI: Crystalline solid; insoluble in water; soluble in alcohol, ether, carbon tetrachloride and petroleum oils. Us e: As a soil poison in trench type termite barriers. Co n t a in e r s ; 5-gal. pails (50-lb.). Niter Cake: (See Sodium Bisulfate, Page 47.) Nitric Acid--Reagent--GS--71% HNO3 in Water Solu tion: Clear, colorless, highly corrosive liquid; soluble in water and ether; decomposes alcohol; Sp. Gr. 1.416-1.426; F. P. below --40F. (--40C.). Us e: As a reagent in chemi cal analysis and for other uses for which HN03 of extremely high purity is required; as an etchant in metallography. CONTAINERS: 1- and 5-pt. bottles, 6H- and 13-gal. carboys, tank trucks. Nitric Acid--Technical and Engraver's Quality (Aqua Fortis, Hydrogen Nitrate, Azotic Acid)--HNO3 in Water Solution: Clear, colorless to light brown, fuming, corrosive liquid; misdble with water. Gr a d e Sp . Gr . %h n o 3 F. P. Be l o w 36 Be. 38 Be. 40 Be. 42 Be. 95% 1.330 1.335 1.381 1.408 1.493 52.3 -- 2F. 56.5 -- 4F. 61.4 -- 9F. 67.2 --30F. 95.0 --40F. Us e: As an ingredient in nitrating acid; in manufacture of explosives, celluloid, nitrocellulose, lacquers, dopes, ce ments, dry colors, inorganic nitrates, insecticides, fertil izers, pharmaceuticals and vitamin products; as a nitrating agent in manufacture of dyes, intermediates, aniline, nitrobenzene, quinoidine, etc.; for pickling and bright dipping stainless steel, copper alloys, aluminum and nonferrous metals; as a pickling agent for steel products; for 45 DUP210010677 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS passivating stainless steel and other nickel-chrome alloys; for purifying petroleum sludge acid; as an etching agent for zinc photoengravers' plates; for general oxidizing purposes. Co n t a in e r s : Technical--144- to 152-lb. carboys, 163- to 600-lb. drums. "Nogas" Metal Pickling Agent: Amorphous, brown powder; soluble in water and acids. Will give foam-pro ducing solutions when dissolved in water or acids. Us e : As an addition agent in acid pickling of iron and steel to produce a foam blanket and to improve the atmosphere by elimination of acid mist particles given off by the pickling operation. Co n t a in e r s : 65-lb. fiber drums, 300-lb. bbl. Oleum (Fuming Sulfuric Acid)--H2SO4 and S03: Nearly colorless, fuming, corrosive liquid; soluble in water with violent evolution of heat; furnished in various strengths. Us e: As an ingredient in mixed acids for ni tration purposes, such as in manufacture of explosives, dyes, intermediates and nitrocellulose products; in sulfonation of vegetable, marine and petroleum oils; in refining petroleum; for fortification of dilute sulfuric acid; for general organic sulfonation. Co n t a in e r s : 775- to 825-lb. drums, tank cars, and tank trucks. Phenothiazine: N. F. Powder. Us e: As an antioxidant for synthetic lubricating oils and as a polymerization inhibitor. Co n t a in e r s : 150-lb. fiber drums. ^Phosphoric Acid--Technical and Food Processing --75% and 80% HsP04 in Water Solution: Colorless, syrupy liquid; miscible with water in all proportions; F. P. 75% below --10F. (--23.3C.). Us e: As a pickling and rust-proofing agent, ceramic vitrifying agent and flux; in manufacture of phosphate salts; in plastics manufacture. Co n t a in e r s : 160- to 180-lb. carboys, 700- to 750-lb. drums, tank cars, and tank trucks. ^Phosphoric Acid 85%--N. F.--H3PO4: Colorless, syr upy liquid; miscible with water; Sp. Gr. 1.69; F. P. approxi mately 20C. Us e: In manufacture of dental cements, pharmaceuticals and food products; as an acidulating agent in jellies, soft drinks, etc. Co n t ain e r s : 170- to 180-lb. carboys; 750- to 775-lb. drums, tank cars, and tank trucks. ^Potassium Chloride--Technical--"Higrade" (Muri ate of Potash)--KCI: White, crystalline salt; soluble in water, alcohol and ether; M. P. 776C. Us e: In manu facture of pigments and potassium salts; as an ingredient in metal heat treating baths and electroplating solutions. Co n t a in e r s : 100-lb. bags. ^Potassium Hydroxide--Technical (Caustic Potash) --KO H: White, deliquescent material in solid, ground flake and broken form containing approximately 92% KOH. Also colorless water solution containing 45% KOH. Solu ble in water, alcohol and ether. Us e: In manufacture of lubricants, potash soaps, detergent compounds, potassium salts, oxalic acid, glassware, matches and pyrotechnics; electroplating, metal cleaning, textile bleaching; for mer cerizing cotton; in nickel cadmium batteries. Co n t ain e r s : 100- to 700-lb. drums, and tank cars. ^Potassium Nitrate--N. F. Double Refined (Saltpeter, Niter)--KN03 : Fine, white, nonhygroscopic crystalline, granular or powdered material; double refined; approxi mately 99.95% KN03; soluble in water; insoluble in alcohol and ether; decomposes at 400C. Us e : As an ingredient in heat treating salts for metals; in manufacture of explosives, pyrotechnics, matches, chemicals, glass and ceramic glazes, CONTAINERS: Bags and barrels in carloads and truckloads only. ^Potassium Permanganate--Technical--U. S. P.-- KMnOi! Dark, purple crystals; soluble in water; decomposes in alcohol; Sp. Gr. approximately 2.7; decomposes above 240C. Us e: As a deodorizing, disinfecting and bleaching agent for oils, fats, resins and waxes; as an oxi dizing agent in manufacture of dyes, intermediates, per fumes, drugs and pharmaceuticals; as a germicide. Co n TAINERS: 110-lb. kegs, 600-lb. drums. Potassium Silicate--Glass Technical: Weight ratio Si02:KsO = 2.5; molar ratio Si02:K20 = approximately 3.87; colorless, anhydrous lump or white powder; soluble in water at elevated temperature and pressure. Us e: In manufacture of glass, ceramic, refractory materials and welding rods; in manufacture of potassium silicate solu tions. Co n t a in e r s : 200-lb. burlap bags, 500-lb. drums. Potassium Silicate--Solution--Electronics 200 -- Technical: Filtered, water white solutions having a SiOs.'KsO weight ratio of 2.07; especially low in heavy metals content. Us e: In coating cathode ray tubes with phosphors, in other uses for potassium silicate where a product of superior clarity and purity is required. Co n t a in e r s : 55-gal. polyethylene lined drums, tank cars, tank trucks. Potassium Silicate--Solution--Technical: Various ra tios of SiOa:KzO in water solution; colorless mobile liquid at gravities of 30-40 Be. Us e: As a non-efflorescing base for inorganic paints and protective coatings; as a coating for roofing granules and welding rods; as a binder in manu facture of carbon electrodes; as an ingredient in flame re tardant paints and compositions. Co n t a in e r s : 55-gal. drums, tank cars, tank trucks. "Quilon" Chrome Complex: A Werner type chromium complex in isopropanol. Us e : As a water repellent and siz ing treatment of paper and other cellulosic materials; for treatment of felt hats, leather, wool fabrics, hydrophobic fibers, and siliceous and other negatively charged surfaces; as an anti-blocking or release agent; for insolubilizing various water soluble or swellable coatings. Co n t ain e r s : 63^-gal. carboys, 55-gal. drums. , Sal Ammoniac: (See Ammonium Chloride, Page 42.) Salt Cake--Industrial Grade (Sodium Sulfate); So dium Sulfate SR--Na2S04: White granular or powdered, crystalline material; soluble in water; containing a mini mum of 95% Na2S04. Us e: In manufacture of sulfate and kraft paper, glass, sodium sulfide and other mineral salts, blanc fixe, ceramic glazes; as an ingredient in mineral animal foods. Co n t ain er s : 100-lb. bags, bulk. *Soda Ash: (See Sodium Carbonate, Page 47.) *Sodium Acetate -- Anhydrous Technical -- CH3COONa: Grayish-white, fine powder; soluble in water; slightly soluble in alcohol; M. P. 324C. Us e: In manu facture of dyes, intermediates and other organic compounds; as a mordant and assist in dyeing paper and textiles; in tanning leather. Co n t a in er s : 50-lb. bags. r ( j I i 1 t ' 1 i DUP210010678 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS *Sodium Acid Fluoride--Technical (Sodium Bifiuoride)--NaHF : White crystalline powder; soluble in water. Us e : As a laundry sour; in etching glass; an ingredient in electroplating solutions. Co n t a in e r s : 150- and 375-lb. drums. *Sodium Bicarbonate--Technical and U. S. P. (So dium Acid Carbonate, Baking Soda)--NaHCOj: White crystalline or granular material; soluble in water; insoluble in alcohol; loses C02 at 270C. Us e : In manufacture of baking powder, pharmaceuticals, effervescent salts and food products; as a neutralizing agent in leather tanning, textile, food and paper industries; as an ingredient in fire extinguishing compounds. Co n t a in e r s : 100-lb. bags. *Sodium Bichromate--Technical (Sodium Dichro mate)--Na2CroOj-2H>Q: Reddish, deliquescent crystals or fine, granular material; soluble in water; insoluble in alcohol; decomposes at 400C. Us e : In chrome tanning of leather and as an insolubilizing agent for glue, gums and gelatin; in manufacture of chrome pigments, for pickling copper alloys; as a corrosion inhibitor in aqueous systems. Co n t a in e r s : 100-lb. bags, 100- and 400-lb. drums. *Sodium Bifiuoride: (See Sodium Acid Fluoride, this page.) Sodium Bisuifate--Globular Technical "G. B. S." (Sodium Acid Sulfate, Niter Cake, Bisulfate of Soda) --NaHSOii White, opaque or translucent, globular shaped pellets; soluble in water; aqueous solution strongly acid in reaction. Us e: As an ingredient of cleaning compositions, metal pickling compounds, metallurgical fluxes. Co n t a in er s : 100-lb. bags, 100- and 400-lb. fiber drums, bulk. '''Sodium Bisulfite--Anhydrous--Technical: (See So dium Metabisulfite, this page.) Sodium Bisulfite--Solution--Technical and Food Processing (Sodium Acid Sulfite)--NaHS03 in Water Solution: Clear, colorless liquid with sulfurous odor; con tains at least 37% NaHS03; gravity approximately 35 Be. Us e: In the manufacture of dyes, intermediates, and other organic chemicals. Co n t a in e r s : 505-lb. bbl. 'Sodium Borate: (See Borax, Page 42.) '"Sodium Carbonate--Anhydrous Technical (Soda Ash, Calcined Soda)--Na2C03(58%Na20): White, amorphous powder, dense or light; soluble in water; M. P. 851C. Us e: In manufacture of sodium compounds and other chemicals, glass, soaps, ceramics, detergents, paper; as a water softener for treatment of municipal and in dustrial supplies; as a detergent in laundries; as an in gredient in metal cleaning compositions. Co n t a in e r s : 100-lb. bags, bulk. Sodium Dimethyl Dithiocarbamate--40% Solution --Technical--(CHs^N-CSSNa: Amber colored, clear water solution; Sp. Gr. 1.2. Us e: As an accelerator short stop in the rubber industry. Co n t a in e r s : Tank cars, tank trucks and 540-lb. drums. '"Sodium Fluosilicate: (See Sodium Silicofluoride, Page 48.) '"Sodium Hydroxide--Technical (Caustic Soda, So dium Hydrate, Lye)--NaOH: White, deliquescent, amorphous solid, flakes or crystalline material; soluble in water, alcohol and glycerin; M. P. 318C. Also as a color less water solution. Us e: In manufacture of soap, sodium salts, rayon, chemical wood pulp, intermediates, indigo, aniline dyes, phenols, paper, mercerized cotton, paints, pigments and varnishes; for refining petroleum and vege table oils; in reclaiming rubber, softening water; in bleach ing, dyeing and printing of textile fabrics; as a detergent for cleaning textiles, metals, etc.; as a plating and storage battery electrolyte. Co n t a in er s : Liquid--tank cars, tank trucks. Other grades--in drums. Sodium Hyposuifite: (See Sodium Thiosulfate, Page 48.) '"Sodium Metabisulfite--Technical (Molecularly De hydrated Sodium Bisulfite)--Na2S20;: White, crystal line powder; soluble in water; Insoluble in alcohol; de composes upon heating; forms sodium bisulfite in water solution. Us e : As a reducing agent in manufacture of chemicals, dyes, intermediates; in tanning extracts; for bleaching textiles, straw, cork and paper; as an ingredient in electroplating solutions. Co n t ain er s : 100-lb. bags, 400-lb. fiber drums. Sodium Metasilicate--Technical--Na2Si0:r5H20: White, granular, translucent solid; soluble in water; in soluble in alcohol; aqueous solution strongly alkaline in reaction. Us e : As a soap builder and ingredient in de tergents and cleaning compounds for cleaning fabrics, glass, ceramics, metal products, etc.; as a detergent in kier boiling of cotton goods; as a water softener. Co n t a in e r s : 100-lb. bags. '"Sodium Nitrate--Technical (Chile Saltpeter, Soda Niter)--NaN03: Colorless or white, hygroscopic, crystal line material; soluble in water; slightly soluble in alcohol and glycerin; M. P. approximately 308C.; decomposes with further heating. Us e: In manufacture of potassium nitrate, red lead, dyes and intermediates, explosives and pyrotechnics; as a constituent of metal fluxes and heat treating salts; as an ingredient in enamels and glass; for preserving food and pickling meats; as a general oxidizing agent. Co n t a in e r s : 100-lb. bags. "'Sodium Phosphate--Di--Anhydrous--Food Grade --NaHP04: White granular or powder; soluble in water; insoluble in alcohol. Us e: Boiler water treatment; in mak ing glazes for potteries, porcelains and chinaware; as an emulsifier in making process cheese; in manufacture of pigments such as cobalt phosphate. Co n t a in er s : 100-lb. paper bags, 125- and 350-lb. fiber drums. '"Sodium Phosphate--Tri--Technical and Food Grade (Trisodium Phosphate)--Na2P04T2H20 (Dodecahydrate)--Anhydrous Grade also available: Colorless crystals; soluble in water; M. P. approximately 73C.; aqueous solution alkaline in reaction. Us e: As a water softener; in manufacture of phosphates, soaps, detergents, paint cleaners, boiler compounds, scouring powders, house hold cleaners; as an alkali builder for laundries; for cleaning textiles, glass, metals, dairy and food processing equipment; for neutralizing acid residues on pickled steel. Co n t ain e r s : 100-lb. bags, 100- and 325-lb. fiber drums. *Sodium Pyrophosphate--Technical (Tetrasodium Pyrophosphate)--Na4P207: White, granular, powdered or amorphous material; soluble in water; insoluble in alco hol; aqueous solution possesses an alkaline reaction, water softening and dispersing action on hard water soaps, clays 47 DUP210010679 GRASSELL! CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS and other inerts. Us e : In manufacture of iron and other pyrophosphates; as a water softener, soap builder and as an ingredient in detergents for cleaning fabrics, glass, metals, etc.; in electroplating solutions; in thinning clay slips for paper coating; in wool scouring; as a general dispers ing agent. Co n t a in e r s : 100-lb. bags, 100- to 325-lb. fiber drums. Sodium Silicate--Glass--Technical--Nas:O'3.25Si02 and Na3O'2.0SiOa: Clear, colorless to slightly greenish, glassy lumps or white powder; soluble in water at elevated temperatures and pressures. Us e: In manufacture of sodi um silicate solutions; in enamel frits; in coated welding rods and cement. Co n t a in e r s : 100-lb. burlap bags, 425and 500-lb. drums, bulk. Sodium Silicate Solution--Technical (Liquid Silicate of Soda, Water Glass): Clear or slightly cloudy liquids of various SiOs'NaaO ratios; gravity from 34-60 Be. Us e: As a corrugated boxboard adhesive; in the manufacture of silica gel; in the manufacture of hot-top collars for pouring molten metal; as a welding rod coating; in manufacture of soap; as a stabilizer in peroxide bleaching of cotton and rayon; for silk weighting; in foundry core binders; in roofing granules. Co n t ain er s : 55-gal. drums, tank cars, and tank trucks. *Sodium Silicofluoride--Technical (Sodium Fiuosilicate)--NasSiFo: White, granular powder; moderately soluble in water; insoluble in alcohol; aqueous solutions possess an add reaction. Us e: As an opacifier in manu facture of glass and enamels; as a flux in vitreous enamels and in remelting secondary aluminum; in electrodeposition of tin and lead. Co n t a in e r s : 100-lb. bags, 125- and 400-lb. drums. *Sodium Sulfate--Anhydrous--Technical (Super Sulfate of Soda)--Na^SO*: White crystals; soluble in water; M. P. 884C. Us e: In the manufacture of glass; for standardizing dyes and dyeing textiles; as a builder and filling agent in detergent products; in manufacture of chrome pigments. Co n t a in e r s : 100-lb. bags, bulk. Sodium Sulfate--Industrial: (See Salt Cake, Page 46.) *Sodiutn Sulfide--Technical--60% Na3S: Deliquescent, yellow to brown solid or thick flakes. Aqueous solution strongly alkaline in reaction. Us e: As a depilatory in tan ning; in textile dyeing and printing; the beneficiation of ores and precipitation of heavy metals. CONTAINERS: 350- to 710-lb. drums. *Sodium Sulfite--Anhydrous Technical--Na2S03:Tan or slightly pink, crystalline powder; soluble in water; slightly soluble in alcohol; aqueous solution possesses a reducing action. Us e: As a bleach and general reducing agent in manufacture of dyes and intermediates; deoxygenating boiler feed water; as an antiseptic and pre servative. Co n t ain er s : 100-lb. paper bags. Sodium Thiosulfate--Technical, Food Processing and Photo Quality (Sodium Hyposulfite, Hypo, Anti chlor)--NazSsOa'SHzO: Colorless to white, translucent, efflorescent crystals; soluble in water; insoluble in alcohol; M. P. approximately 48C.; decomposes with further heat ing. Us e: As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper, pulp, textiles, etc.; in manufacture of dyes. Co n t ain e r s : 100-lb. bags. Sodium Thiosulfate--Anhydrous Technical, Food Processing and Photo Quality (Sodium Hyposulfite, Hypo, Antichlor)--Na2S203: White granular crystals; soluble in water; insoluble in alcohol. Us e : As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper,pulp, textiles, etc. Co n t a in e r s : 64- and 100-lb. bags. *Sodium Tripolyphosphate--Technical--NatP3Oia: White, powdered or granular, free-flowing material; solu ble in water. Us e: Household and industrial cleaning compound formulations; textile processing; dairy deter gents; deflocculation of clays and other solids in suspension. Co n t a in e r s : 100-lb. bags, 100- and 325-lb. fiber drums. Soil Compound: (See "NC" Soil Compound, Page 45.) Stannous Chloride--Crystal Technical (Muriate of Tin, Tin Crystals, Tin Bichloride)--SnCl2-2H20: White crystals; soluble in water, alkalies, tartaric acid and alcohol; M. P. approximately 38C. Us e : In tin electro plating; in production of dry colors and pigments. Co n t a in e r s : 100- and 400-lb. fiber drums. Strontium Nitrate--Technical--Sr(NOs)2: White crys talline powder; soluble in water; slightly soluble in alcohol; Sp. Gr. 2.98; purity approximately 97%', flame tests carmine-red. Us e: In manufacture of railroad and highway flares, marine signals, fireworks, pyrotechnics, and color pigments. Co n t a in er s : 100-lb. bags, 600-lb. bbl. Sulfamic Acid--Technical--Crystal and Granular Grades, HS03NH2: White crystalline or granular solid, soluble in water; aqueous solutions approach the common mineral acids in acidity; all common salts highly water soluble. Us e: For removing scales and deposits from boil ers, heat exchangers, condensers, evaporators, jacketed vessels, etc.; as an ingredient in household cleaning formu lations; in nitrite removal in azo dye manufacture and piece dyeing of textiles and leather; in sulfation of alcohols; as a catalyst for urea-formaldehyde resins; as the electrolyte in plating baths. Co n t ain er s : 400-lb. fiber drums. *Sulfur--Technical and N. F. (Commercial Flour Technical, Light and Heavy Relined N. F., Flowers of Sulfur Sublimed, Roll Sulfur Technical, Com mercial Rubbermakers' Technical)--S: All grades. Pale yellow, solid, amorphous, crystalline sticks or powder of varying degrees of fineness; insoluble in water; soluble in sodium sulfide, carbon disulfide and sulfur chloride. Us e: In manufacture of rubber, paper, sulfuric acid, ce ments, explosives, pharmaceuticals, glass, paints, matches, leather, pyrotechnics, steel, soaps and for many other materials. Co n t ain e r s : 50- to 200-lb. bags, 165- to 500-lb. bbl. Sulfuric Acid--Reagent--95 to 98% H2SO4 in Water Solution; Clear, colorless, heavy, oily liquid; dissolves in water with evolution of heat; Sp. Gr. 1.84; F. P. --15C. Us e: As a reagent in chemical analysis or where sulfuric acid of an especially high purity is required. Co n t ain e r s : 1- and 5-pt. bottles, 6and 13-gal. carboys, tank trucks. DUP210010680 GRASSELLI CHEMICALS DEPARTMENT INDUSTRIAL CHEMICALS Sulfuric Acid, Fuming: (See Oleum, Page 46.) Sulfuric Acid, Inhibited: (See `Duclean" No. 1 Inhibited Sulfuric Acid, Page 43.) Sulfuric Acid--Technical (Oil of Vitriol)--H2S04: Clear, colorless, heavy, oily, corrosive liquid; soluble in water in all proportions with evolution of heat. All com mercial strengths. USE; In manufacture of superphos phate fertilizers, ammonium sulfate from by-product coke ovens, mineral colors, explosives, inorganic acids, phosphates, alum, intermediates, dyes and other organic chemicals; in refining of petroleum and manufacturing of sulfonated oils; for pickling iron and steel and bright dipping nonferrous metals; in pickling of hides and chrome tanning of leather; in sizing and parchmentizing paper; in manufacture of synthetic rubber latex, rayon, synthetic detergents, sugar and starch; as a general dehydrating agent; assistant in dyeing, bleaching, carbonizing, mercer izing textiles; production of bleaching clays; animal and vegetable oil refining; catalyst in alkylation process for manufacture of high octane gasoline. Co n t a in e r s ; 180to 200-lb. carboys, 700- and 750-lb. steel drums, tank cars, and tank trucks. Tanning Agent: (See "G-942" Tanning Agent, Page 44.) *Tetrasodium Pyrophosphate: (See Sodium Pyrophos phate, Page 47.) Tin Crystals: (See Stannous Chloride, Page 48.) Trimethylamine--Anhydrous and Aqueous Solu tions--Technical--N(CHs).-s: Anhydrous--colorless gas, clear and water white when liquefied. Us e : Intermediate for choline salts (animal feed supplement) and quaternary ammonium salts; in organic synthesis; in manufacture of ion exchange resins and pharmaceutical intermediates. Co n t a in e r s : Anhydrous--100-lb. cylinders, tank trucks, tank cars. Aqueous solutions--55-gal. drams, tank cars, and tank trucks. "Volan" Bonding Agent--Methacrylate Chromic Chloride: A Werner type chromium complex in isopropa nol. Us e : As a bonding agent applied to glass fibers used in reinforced plastic laminates to improve the adhesion be tween glass and resin, especially under moist conditions; also to improve adhesive bond between other hydrophilic surfaces such as paper and wood and polymeric coatings or impregnants. CONTAINERS: 6)/-gal. carboys. Wood Preservatives: (See CZC Chromated Zinc Chloride, Page 43; Copperized CZC Chromated Zinc Chloride, Page 43; Zinc Chloride, this page; and Fungicides, Indus trial, Page 44.) "X-12" Flame Retardant: White crystalline material, completely soluble in hot water. Especially formulated to provide temperature stability and improve aging charac teristics. Exerts a stabilizing effect upon many dyes, im proving light fastness and crocking characteristics. Re sistant to removal by drycieaning solvents. Us e: One-step, renewable-type flame retardant treatment for use on cellulosic materials, including cotton, viscose rayon, and paper; not suitable for use on acetate rayon, or synthetic fibers, except where blended with substantial percentages of cellulosic varieties. CONTAINERS: 50-lb. fiber drums, 100lb. paper bags. Zinc Ammonium Chloride--Technical--ZnCI23NHiCI: Granular or crystal; foaming and nonfoaming; soluble in water. Us e: As a fluxing salt for hot dip gal vanizing of pipe, tubes, tanks, malleable iron fittings, wire, etc.; as a flux in metal soldering and tinning; in electric batteries; in manufacture of soldering compounds. CON TAINERS: 100-lb. paper bags, 400-lb. drams. Zinc Ammonium Chloride--High Ratio--Technical --ZnCI2T.9NH4CI: White crystals; soluble in water. Us e : As a preflux especially in continuous galvanizing opera tions. Co n t a in er s : 100-lb. paper bags. Zinc Chloride--Fused and Granular Technical (But ter of Zinc)--ZnCIs: White translucent, hygroscopic solid or white, granular powder; soluble in water and alcohol; M. P. 262C.; B. P. 732C. Solution: ZnCh of various concentrations in water solution; clear, colorless solutions; miscible with water in all proportions, becoming slightly turbid at high dilutions. Us e: As an ingredient in dry cell batteries, tinning, galvanizing and soldering fluxes; for preservation and flameproofing of wood; in manufacture of vulcanized hard fiber, intermediates, dyes, in reclaiming synthetic rubber. Co n t ain e r s : Granular--50- and 650-lb. drams. Solution--170-lb. carboys, 690-lb. drums, tank cars. Fused--1,100-lb. drums. *Zinc Stearate -- Technical and U.S.P.-- Zn(CiB H3 s O2) 2: Fine white, soft, amorphous, bulky powder; insoluble in water, alcohol and ether; soluble in acids; M. P. 130C. Us e: As an activator for accelerators used in the vulcanization of rubber; as an anti-sticking agent in making molded rubber articles. Co n t ain e r s : 50-lb. cartons. tI fI 49 DUP210010681 GRASSELLl CHEMICALS DEPARTMENT BIOLOGICAL CHEMICALS b io l o g ic a l c h e mic a l s ` `Cylan" Calcium Cyclamate: A non-nutritive sweet ening agent. Us e : In dietetic foods and beverages. Co n t a in e r s : 5-, 25- and 100-lb. fiber drums. "Cylan" Sodium Cyclamate (Powder and Crystal line): A non-nutritive sweetening agent. Us e: In dietetic foods and flavoring pharmaceuticals, beverages. Co n t ain e r s : (Powder) 5-, 25- and 100-lb. fiber drums; (Crystalline) 100-lb. fiber drums. FUNGICIDES Copper-A Compound (Tetra Copper Calcium Oxy chloride): A complex compound containing not less than 45% copper as metallic; finely divided bluish powder. Us e : In control of early and late blight on potatoes and tomatoes, leaf spot on sour cherries and control of blights on celery, etc.; m manufacture of agricultural copper crust. Co n t ain e r s : 6-lb. bags (8 in a case), 50-lb. bags. Meat Curing Compound: A mixture of 90% sodium cyclamate and 10% sodium nitrite. Us e: In curing of bacon to provide improved cooking qualities. Co n t ain e r s : 3%-lb. cans (6 in a case). INSECTICIDES Dairy Cattle Insecticide: (See under Livestock Chemi cals, Page 52). "Fermate" Ferbam Fungicide: A wettable powder containing ferbam (ferric dimethyldithiocarbamate). Us e: To control plant diseases such as scab on apples and pears, cedar rust on apples, blue mold in tobacco seed beds, blue mold on spinach, leaf spot and brown rot on cherries, black rot on grapes, black spot and rust on roses. Co n t ain er s : 3-lb. bags (12 in a case), 50-lb. bags (see also under Garden Products, Page 53). "Deenate" 50W DDT Insecticide: A wettable powder containing 50% DDT Technical. Us e : As a spray for control of insect pests of fruits and vegetables as well as certain livestock and buildings. Co n t a in er s : 3-lb. bags "Lignasan" Fungicide: A composition based on ethyl mercury phosphate. Us e: For prevention of surface molds and blue-stain organisms on freshly sawed lumber. CON TAINERS: 2-lb. bags (50 in a drum), 125-lb. drums in bulk. (16 in case), 4-lb. bags (12 in a case), 50-lb. bags. "Manzate" Maneb Fungicide: A wettable powder con EPN 300 Insecticide: A wettable powder containing 25% taining maneb (manganese ethylenebisdithiocarbamate). ethyl p-nitrophenyl thionobenzene phosphonate as the active Us e: To control many fungus diseases of vegetable crops ingredient. Us e: As a spray insecticide to control certain such as tomatoes, potatoes, celery, cucumbers, lima beans, mites, scales and other insects such as plum curculio, onions and spinach; fruits, nuts, apricots, peaches, grapes peach tree borer, orange tortrix, grape berry moth, European and almonds; certain ornamentals. Co n t a in e r s : 3-lb. bags com borer and potato aphid on fruits and vegetables; and (12 in a case), 4j^-lb. bags (8 in a case), 50-lb. fiber drums. as a dust ingredient for boll weevil and certain other cotton insects. Also for use by qualified agencies for control of "Melsan" Fungicide: A composition based on ethyl certain mosquito larvae. Co n t a in e r s : 3-lb. bags (12 in a case). mercury phosphate and sodium pentachlorophenate. Us e : For prevention of surface molds and blue-stain organisms Lead Arsenate Insecticide--"NuRexform" Standard: A poisonous powder (colored pink to comply with insecti on freshly sawed lumber. Co n t a in e r s : 150-lb. drums in bulk. cide laws in several states). Us e: For control of codling moth, cankerworm, curculio and most chewing insects feeding on foliage and fruit; for grubproofing turf. Co n t a in e r s : 1-lb. bags (48 in a case), 3-lb. bags (16 in a case), 4-lb. bags (12 in a case), 6-lb. bags (8 in a case). "Parzate" Liquid Nabam Fungicide: A solution con taining nabam (disodium ethylenebisdithiocarbamate) to be combined with zinc sulfate in the spray tank. Us e : For control of early and late blights of tomatoes, potatoes, and celery; certain leaf diseases of truck crops and ornamentals. "Marlate" 50 Methoxychlor Insecticide: A wettable Co n t a in e r s : 5- and 30-gal. drums. powder containing 50% technical methoxychlor. Us e: For control of insect pests of vegetables, fruits and stored grain as well as livestock. Very low toxicity to warm blooded animals. Co n t a in e r s : 4-lb. bags (12 in a case), 50-lb. bags. "Parzate" Zineb Fungicide: A wettable powder con taining zineb (zinc ethylenebisdithiocarbamate). Us e : To control early and late blights of tomatoes, potatoes, and celery; downy mildew and certain other leaf diseases of many vegetable crops; tobacco blue 'mold; for summer "Marlate" 2-MR Methoxychlor Insecticide: Emulsifiable formulation containing 2 pounds technical methoxy control of scab, sooty blotch, Brooks spot and black rot on apples. CONTAINERS: 3-lb. bags (12 in a case), 50-lb. bags. chlor per gallon. Us e: For control of certain insect pests of forage crops and certain livestock; in grain storage bins; as a space spray for flies. Co n t a in e r s : 1-gal. cans (6 in a case), 5-, 30- and 50-gal. drums. "Parzate" C Zineb Fungicide: A wettable powder con taining zineb (zinc ethylenebisdithiocarbamate). Us e : For the control of fruit russeting and greasy spot on oranges and grapefruit in Florida citrus groves. Co n t a in e r s : 3-lb. 90% Technical Methoxychlor Oil Concentrate: Off- bags (16 in a case), 5-lb. bags (10 in a case), 50-lb. bags. li: white solid. Us e: Sold only to manufacturers or processors for preparation of insecticide formulations. Co n t a in er s : "Sulforon" Wettable Sulfur: Very finely divided sulfur; 100-lb. fiber drums. readily dispersible in water; not less than 97% sulfur; contains a wetting agent. Us e : As a fruit fungicide for "NuRexform" Standard Lead Arsenate: (See Lead Arsenate Insecticide, above). control of scab, brown rot, etc. Co n t a in e r s : 6-lb. bags (8 in a carton), 50-lb. bags. DUP210010682 BIOLOGICAL CHEMICALS "Suiforon" X Wettable Sulfur: Extremely finely divided wettable sulfur of 5 microns average particle size. Us e: For control of brown rot, scab and certain other fungus diseases of fruits. Co n t a in er s : 5-lb. bags (10 in a case), 50-lb. bags. "Thylate" Thiram Fungicide: A wettable powder con taining thiram (tetramethylthiuramdisulfide), off-white in _,,1___ TT. -T>-._____________________t*___ A V_C?1VJ1. uoc>> a u cvJiiLicn euiu i_c-z uctx.ii Oumi ____ 1 ^ diseases; particularly advantageous for fine-finish spray programs. Co n t a in er s : 5-lb. bags (10 in a case), 50-lb. bags. "Zerlate" Ziram Fungicide: A wettable powder con taining ziram (zinc dimethyldithiocarbamate). Us e: To control certain plant diseases of truck crops, fruits, and nuts. Co n t a in e r s : 3-lb. bags (12 in a case), 50-lb. bags. WEED AND BRUSH KILLERS "Animate" X Weed and Brush Killer--95% Ammo nium Sulfa mate: Us e: A non-selective weed and brush killer particularly effective for control of woody plants. Usually used as a foliage application at 60 lb. per 100 gal. of water for control of most species of brush. May be used dry or in solution for preventing sprout growth from stumps and for killing trees such as blackjack oak and various other weed trees. Co n t a in e r s : 40-lb. drums, 60-lb. bags. "Animate" Weed and Brush Killer Solution: This product contains 5.6 lb. of "Animate" X Weed and Brush Killer per gal. For railroad use in tank car lots only. "Dybar" Fenuron Weed and Brush Killer: Pellets containing 25% 3-phenyl-1,1-dimethylurea (fenuron). Us e: For control of certain undesirable woody plants, such as oak, birch, locust, maple, pine, poplar and elm on fence rows, drainage ditches, utility and railroad right-of-ways, and other non-cultivated areas; spot treat ment for control of bindweed. Co n t ain e r s : 10- and 50-lb. "Karmex" DL Diuron Herbicide: A suspension con taining 28% 3-(3,4-dichlorophenyl)-l,l-dimethylurea (diu ron). Us e: For pre-emergence weed control in cotton. Co n t a in e r s : %-gal. cans (6 in a case). "Karmex" Diuron Weed Killer: A wettable powder containing 80% 3-(3,4-dichlorophenyi)-1,1-dimethylu rea (diuron). Us e: Selective weed control in certain crops such as sugar cane, pineapple, caneberries, alfalfa, ^grapes, cotton and peppermint; also for same nonselective uses as "Telvar" monuron weed killer. Co n t a in e r s : 2-lb. cans (6 in a case), 10- and 50-lb. drums. "Kloben" Neburon Weed Killer: A wettable powder containing 50% l-n-butyl-3-(3,4-dichlorophenyl)-lmethylurea (neburon). Us e: Selective weed control in commercial nursery plantings of certain woody orna mental plants. Co n t a in e r s : 5- and 25-lb. fiber drums. "Telvar" Monuron Weed Killer: A wettable powder containing 80% 3-(p-chlorophenyl)-1,1-dimethylurea (monuron). USE: As a non-selective weed killer on GRASSELLI CHEMICALS DEPARTMENT sites where bare ground is desired. Controls a wide range of annual and perennial grasses and herbaceous weeds. Recommended for non-cropland areas such as utility, highway, pipeline, and railroad right-of-ways; petroleum tank farms; lumberyards; industrial plant sites; irrigation and drainage ditches and around farm buildings; also for selective control of weed seedlings in certain crops such as asparagus, sugar cane, pine- iis; 5,ih as a to control deep-rooted perennial weeds. Co n t ain e r s : 2-lb. cans (6 in a case), 10- and 50-lb. drums. "Tryben" 200 Weed Killer: An aqueous solution of the dimethylamine salt of trichlorobenzoic acid, containing 2 pounds of acid equivalent per gallon. Us e: Control of many species of broadleaf weeds (especially deep-rooted perennials) and certain species of woody vines and brush. Co n t a in er s : 1-gal. cans (4 in a case), 5- and 30-gal. drums. "Zobar" Weed Killer: An aqueous solution of the di methylamine salts of polychlorobenzoic acids, containing 4 pounds of acid equivalent per gallon. Us e: Control of many species of broadleaf weeds (especially deep-rooted perennials) and certain species of woody vines and brush. Co n t a in er s : 1-gal. cans (4 in a case), 5- and 30-gal. drums. SOIL FUMIGANTS VPM Soil Fumigant: A solution containing sodium methyldithiocarbamate. Us e: For control of certain weeds, suil-borne fungus diseases, nematodes and garden centi pedes in plant propagation beds, new turf areas, and fields for ornamental plants. Co n t a in e r s : 1-gal. bottles (4 in a case), 5-gal. cans, 30-gal. drums. SEED DISINFECTANTS "Arasan" 75 Thiram Seed Disinfectant and Pro tectant: Active ingredient--75% thiram (tetramethylthiuramdisulfide). Us e: As seed disinfectant and protectant in treatment of field and sweet corn, peanuts, sorghum, rice, soybeans, peas, beans, melons, and other vegetable crop seeds, to reduce losses from seed decay and dampingoff. Also highly effective treatment for grass seed and small legumes, such as alfalfa and clover. Formulated for dry treatment of seed, but for special uses it may be applied as a slurry. CONTAINERS: 1-oz. envelopes, 8-oz. cans (24 in a case), 2-lb. canisters (12 in a case), 25- and 100-lb. drums. "Arasan" Thiram Seed Disinfectant and Protectant: Active ingredient--50% thiram (tetramethylthiuramdi sulfide). Us e: Same as "Arasan" 75. Formulated for dry treatment only. CONTAINERS: 25- and 100-lb. drums. "Arasan" SF-X Thiram Seed Disinfectant and Pro tectant: Active ingredient--thiram (tetramethylthiuram disulfide). Us e: For treatment of seeds of the same crops for which "Arasan" 75 is recommended, with the exception of onions and peanuts. The powder is wettable and is used as a slurry treatment. CONTAINERS: 5%-oz. cans (24 in a case), 25- and 100-lb. drums. 51 Lil DUP210010683 GRASSELLI CHEMICALS DEPARTMENT BIOLOGICAL CHEMICALS "Arasan" SF-M Thiram Seed Disinfectant and Pro tectant: Contains thiram (tetramethylthiuramdisulfide) and methoxychlor. Us e: Treatment of the same crop seeds for which "Arasan" SF-X is recommended. For use in slurry treaters. Co n t a in e r s : 25- and 100-lb. drums. "Ceresan" 75 Liquid Mercurial Seed Disinfectant: Active ingredients--ethyl mercury 2,3-dihydroxy propyl mercaptide and ethyl mercury acetate. Red in color. Us e: Undiluted in ready-mix treaters for control of certain soilborne and seed-borne diseases of wheat, oats, barley, rye, flax and cotton. Co n t ain e r s : 5-, 30- and 55-gal. drums. "Ceresan" 100 Liquid Mercurial Seed Disinfectant: Active ingredients--same as "Ceresan" 75, but higher strength. Red in color. Us e: Undiluted in ready-mix treaters, or diluted with water for use in slurry treaters. For control of certain soil-borne and seed-borne diseases of wheat, oats, barley, rye, flax, and cotton; for control of snow mold of wheat. Co n t a in e r s : 1-, 5-, 30-, and 55-gal. drums. "Ceresan'' 200 Liquid Mercurial Seed Disinfectant: Active ingredients--same as "Ceresan" 75 and 100, but higher strength. Red in color. Us e: Diluted with water in slurry treaters for control of certain soil-borne and seedborne diseases of wheat, oats, barley, rye, flax, and cotton; for control of snow mold of wheat. Co n t ain er s : 5-, 30-, and 55-gal. drums. "Ceresan" M Seed Disinfectant: Active ingredient-- ethyl mercury p-toluene sulfonanilide. Us e: As a seed dis infectant and protectant for seed grains to control stinking smut of wheat; smut of oats; covered smut, black loose smut and stripe of barley; stem and covered smuts of rye; seedling blight of all four grains; loose and covered kernel smut of sorghums; smut of foxtail millet; reduces seed decay and damping-off of flax, sugar beets and cotton; and checks surface seed-borne anthracnose and angular leaf spot of cotton. May be used either as a dust or slurry treatment. Co n t a in e r s : 14-oz. cans (12 in a case), 3-lb. cans (6 in a case), 40- and 100-lb. drums. "Ceresan" M-2X Seed Disinfectant: Active ingredient --ethyl mercury p-toluene sulfonanilide. A non-dusting formulation twice the strength of "Ceresan" M Seed Dis infectant. Us e: For treatment of seeds of the same crops for which "Ceresan" M is recommended. For use in slurry treaters only. Co n t ain e r s : 5-lb. can with attached con tainer of special liquid sticking agent (4 in a case). "Ceresan" (New Improved) Seed Disinfectant: Active ingredient--ethyl mercury phosphate. Us e: Particularly effective as a dip treatment for gladiolus corms. May also be used as a dust treatment on the same crops and for the same purposes as "Ceresan" M. Co n t ain e r s : 1-lb. (12 in a case) and 100-lb. drums. "Ceresan" (2%) Seed Disinfectant: Active ingredient --ethyl mercury chloride. Us e: For treatment of cotton, peanuts, and pea seeds to control the numerous seed-borne diseases and to reduce seed decay and check damping-off; and as a short soak treatment for basal rot of narcissus bulbs. Co n t a in e r s : l)4-lb. cans (12 in a case), 75-lb. drums. "Delsan" A-D Seed Protectant: Active ingredients-- thiram (tetramethylthiuramdisulfide) and dieldrin (hexa- chloroepoxyoctahydro-endo, exo-dimethanonaphthalene). Combination fungicide and insecticide seed treatment for com, peas, beans, cucurbits, rice and sorghum to reduce losses from seed decay, seedling blight, and certain soil insects. For use as a slurry treatment. Co n t a in e r s : 7-o z. cans (24 in a case), 25- and 100-lb. drums. "Semesan" Seed Disinfectant: Active ingredient-- hvdroxymercurichlorophenol. Us e: In treatment of vege table, flower and certain other crop seeds, bulbs, corms, roots and tubers to control seed-borne diseases; reduce seed decay, and check damping-off of seedlings. Co n t a in e r s : 4-oz. cans (36 in a case); 12-oz. cans (12 in a case) and 25-lb. pails. "Semesan Bel" Dip Disinfectant: Active ingredients --hydroxymercurinitrophenol and hydroxymercurichlorophenol. Us e: For treatment of Irish and sweet potatoes, seed pieces and sweet potato slips; to control surface seedborne scab and Rhizoctonia on Irish potatoes and stem rot, black rot and scurf on sweet potatoes. Co n t a in e r s : 3-oz. cans, 1-lb. (12 in a case); 4-lb. cans (6 in a case); 40-lb. pails. TURF FUNGICIDES "Semesan" Turf Fungicide: Active ingredient--hydroxymercurichlorophenol. Us e: For prevention and con trol of brown patch and other fungus diseases on fine turf of lawns and golf greens. May be used in combination with "Tersan" 75 for broader, more effective disease control and greater safety to turf. Co n t a in e r s : lJ/2-lb. cans (12 in a case), 25-lb. and 100-lb. drums. "Tersan" 75 Thiram Fungicide: Active ingredient --thiram (tetramethylthiuramdisulfide). Us e: For treat ment of turf to control brown patch and dollar spot; for control of stem rot of sweet potatoes; for control of basal rot and decay of gladiolus bulbs. Co n t a in e r s : 8-o z. cans (24 in a case) and 3-lb. bags (12 in a case). LIVESTOCK CHEMICALS Dairy Cattle Insecticide: Tan wettable powder residual insecticide containing 50% technical methoxychlor. Us e: For dust application to control homflies on dairy cattle and for fly control in dairy bams and premises. Co n t ain er s : 1-lb. canisters (24 in a case). Phenothiazine:N.F. grade, and drench compound No. 4. Us e: As an anthelmintic (vermifuge) for sheep, hogs, cattle, horses, mules and poultry. Sold only to manu facturers of stock remedies or veterinarian supplies. CON TAINERS: 50-lb. bags, 150-lb. fiber drums. NUTRITION PRODUCTS Methionine Feed Grade: A synthetically produced es sential amino acid. Us e : As a supplement in poultry, dog and livestock feeds. Co n t ain e r s : 50-lb. fiber drums. "Hydan" Feed Supplement: Methionine hydroxy ana logue calcium 90%. Us e: A source of methionine (an essential amino acid) for poultry, dog and livestock feeds. Co n t a in e r s : 50-lb. bags. 52 DUP210010684 GRASSELLI CHEMICALS DEPARTMENT BIOLOGICAL CHEMICALS MISCELLANEOUS Emulsifying Agent A: An oil soluble composition de signed for use in preparation of emulsifiable oil formu lations. Co n t a in e r s : 1-gal. cans, 5-gal. drums (nonreturnable). 40% Dimethylamine Solution--(CH3)aNH: For use by manufacturers in formulating 2,4-D and 2,4,5-T weed killers. CONTAINERS: 50-gal. drums (ncnreturnable), tank cars, tank trucks. Diphenylamine--(C6Hs)zNH:A granular product for use in the preparation of screwworm remedies applied to live stock. Sold only to manufacturers for further compound ing. Co n t a in e r s : 100-lb. bags. 40% Monomethylamine Solution--CH3NH2: For use in manufacture and formulation of pesticides. Co n t ain e r s : 50-gal. drums (nonreturnable), tank cars, tank trucks. Spreader-Sticker: An amber colored liquid containing a wetting and sticking agent. Us e: As a spreading and sticking agent for agricultural sprays. Co n t a in e r s : 1-pt. cans (16 in a case), 1-gal. cans (6 in a case), 5-gal. drums (nonreturnable). (See also under Garden Products, Page 54.) GARDEN PRODUCTS (Small Package Items for the Home Gardener) Combination Insecticide-Fungicide Products: Floral Dust: Wettable powder for use as a dust or water spray. Us e: For insect and disease control on a wide variety of flowers and ornamentals including roses. Con trols many chewing and sucking insects, and is highly effective against plant diseases such as rose black spot, rusts, powdery mildew and certain leaf spot diseases. Co n t ain e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. Fruit Tree Spray: Wettable powder designed especially for water spray application. Us e: For all sprays during the growing season on apples, peaches, cherries, pears, plums, quince, strawberries, currants and gooseberries. Controls major insect pests and fungus diseases damaging home fruit plantings. Co n t ain e r s : 1-lb. canisters, 3-lb. bags. Rose Insecticide & Fungicide; Wettable powder for use as a dust or water spray. Us e: Designed especially for roses but effective on most other flowers; controls major fungus diseases of rdses and kills a wide range of insect pests, including red spider mites. Co n t ain e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. Rose Spray-Duster: Pressurized sprayer that sprays both liquid insecticides and a dry fungicidal dust. Us e : For insect and disease control on roses. Co n t ain e r s : 12-o z. aerosol cans. Tomato Dust: Wettable powder for use as a dust or water spray. Us e: For control of insect pests and blights commonly attacking tomatoes in home gardens. Co n t a in e r s : 8-oz. squeeze dusters, 2-lb. bags. Vegetable Garden Dust: Wettable powder for use as a dust or water spray. Us e : On all common vegetables. Controls a wide range of insect pests and is highly effective against many fungus diseases, including both early and late blights of tomatoes and potatoes. Co n t a in e r s : 8-oz. squeeze dusters, 1-lb. canisters, 3-lb. bags. Fungicides: "Fermate" Ferbam Fungicide: Highly effective disease control agent, safe on a wide range of plants, for water spray application. Us e: For black spot and rust of roses, as well as many diseases of other flowers, vegetables, fruits, berries and tobacco. Co n t a in e r s : 8-oz. canisters. insecticides: Aphid & Mite Spray: Emulsifiable insecticide containing 50% malathion. Us e : To control aphids, red spiders and many other insects on flowers, ornamentals, evergreens, fruits and vegetables. Co n t a in e r s : 1-fl. oz., 4-fl. oz., 1-pt. bottles. 6% Chlordane Dust: Insecticide for control of ants, Japanese beetle grubs, roaches, spiders, chiggers, and many other insect pests of the lawn, garden, soil, and household. Co n t ain e r s : 8-o z. squeeze dusters, 1-lb. canisters, 3-lb. bags. 72% Chlordane Insecticide: Emulsifiable insecticide for use as a liquid spray. USE: Concentrated form of chlordane for insect control on lawns, flowers, shrubs, and ornamental plants, and as a residual spray around building foundations for the control of termites. Co n t ain e r s : 8- and 16-fl. oz. bottles. 50% DDT: Wettable powder insecticide for use as a water spray. Us e: Concentrated form of DDT for insect control on many garden and ornamental plants, on lawns, and as residual spray around buildings. Co n t ain er s : 1-lb. canisters. Dormant Spray Oil: A highly refined, emulsifiable oil for the control of overwintering forms of certain scales, mites and aphids. Us e: As a prefoliage spray on fruit trees, shade trees, ornamentals and evergreens. Co n t a in e r s : 1-qt. cans. Garden Insecticide: Emulsifiable insecticide containing 25% methoxychlor and 25% malathion. Us e: For the control of many insects on vegetables, fruits, flowers, ornamentals and evergreens. Also may be used to control flies, mosquitoes, roaches, ants, spiders, crickets, clover mite, and earwigs around dwellings, barns and other out buildings. Co n t a in e r s : 4-, 8-, 16-fl. oz. bottles. 50% Technical Methoxychlor: Wettable powder in secticide for use as a water spray. Has very low order of toxicity to humans; may be used close to harvest time. Us e: For insect control on garden and ornamental plants; also highly effective as residual spray around buildings. Co n t a in e r s : 8-o z. canisters. Plant Food: Ferro FTE (Fritted Trace Elements): Essential trace elements in a new slowly soluble form. Us e: Soil mineralizer for gardens, lawns and potted plants; also for commercial crop use. Co n t a in e r s : 1-lb. canisters, 5-lb. bags, 50-lb. bags. 53 DUP210010685 GRASSELLI CHEMICALS DEPARTMENT Soluble Plant Food: High strength (19-22-16) fast-acting plant food for gardens, lawns and house plants. Readily soluble in water; feeds through leaves or roots, Us e: As a foliage spray, transplanting solution, root feeding, grass feeding. Co n t a in e r s : 6-o z. canisters, lj^-lb. canisters, 4-lb. bags, 50-lb. bags. Repellents: insect Repellent Lotion: Active ingredient--r4,xN-diethyl-meta-toluamide. Us e: Repels many biting insects such as mosquitoes, chiggers, biting flies, ticks and gnats. For application to skin and clothing. Co n t a in e r : oz. bottles. Insect Repellent Sprayer: Active ingredient--N,Ndiethyl-meta-toluamide. Pressurized sprayer particularly useful for application to clothing. Us e: For repelling many biting insects including chiggers and ticks where appli cation to outer garments is necessary. CONTAINER: 5-oz. aerosol can. Seed Disinfectants: The following sue offered in small packages by Garden Products Section. "Arasan" 75 Thiram Seed Disinfectant: (SeePage 51). New Improved "Ceresan" Seed Disinfectant: (See Page 52). "Semesan" Seed Disinfectant: (See Page 52). "Semesan Bel" Seed Disinfectant: (See Page 52). "Tersan" 75 Turf Fungicide: (See Page 52). Weed and Brush Killers: "Animate" Weed and Brush Killer: A yellow, crystal line, water soluble solid containing 80% ammonium sulfamate. Us e: For the non-selective kill of undesirable plant growth; the outstanding control for poison ivy, poison oak, BIOLOGICAL CHEMICALS poison sumac. Very useful in eradicating vegetation in driveways, walks, tennis courts, etc. Effective for killing brush and certain trees; prevents sprouting of tree stumps. Co n t a in e r s : 2-lb. and 6-lb. bags. Lawn Weed Killer: Non-volatile 2,4-D amine selective weed killer for application as a water spray. Us e : For killing broad leaf lawn weeds such as dandelion and plantain; also effective against wild onion and certain woody plants such as Japanese honeysuckle and poison ivy. Co n t a in e r s : 8-fi. oz. cans. Lawn Weed Killer No. 2: More concentrated formu lation of 2,4-D amine than above; particularly useful for those having larger-than-average turf areas to maintain. Package contents treat 21,000 sq. ft., about }4 acre. Us e: For killing most broad leaf lawn weeds and many woody plants. Co n t a in e r s : 1-qt. cans. Lawn Weeder: Pressurized sprayer containing 2,4-D. USE: To kill dandelion, plantain, and many other common broad leaf lawn weeds. Contains an inert white tracer to mark sprayed weeds. Co n t a in er s : 12-o z. aerosol cans. Spray Adjuvant: Spreader-Sticker: A liquid wetting and sticking agent for use in insecticide, fungicide and weed-killing sprays. Co n t a in e r s : 1-fl. oz. cans. Miscellaneous: Tree Wound Dressing: Pressurized sprayer. Us e: For treatment of pruning, grafting, or other wounds of shade trees, fruit trees, ornamentals, roses, and other woody plants. Sets quickly, forming a protective seal. CONTAIN ERS: 12-oz. aerosol cans. Garden Hose Sprayer: For attachment to garden hose. Us e : Sprays most garden chemicals that require dilution with water. 54 DUP210010686 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Atlanta 3, Georgia Charlotte 2, North Carolina Chicago 3, Illinois Los Angeles 58, California New England District, Rumford 16, Rhode Island New York 13, New York Philadelphia 3, Pennsylvania 1261 Spring Street, N. W. 427 West Fourth Street 7 South Dearborn Street 2930 East 44th Street 50 North Broadway 40 Worth Street 1616 Walnut Street PLANT: Deepwater, New Jersey PRODUCTS TELEPHONE PRospect 4-1000 TRinity 5-5391 FRanklin 5-5561 ANdover 3-7000 LUdlow 2-6464 GEneva 4-6500 COrtlandt 7-3966 Kingsley 5-1950 The Intermediate Organic Chemicals of the Dyes and Chemicals Division are listed in alphabetical order throughout the Alphabetical Section. This Division supplies to the consuming industries a complete line of dyes, auxiliaries, textile finishes, surface active agents, wetting, dispersing, scouring and emulsifying agents, and products to meet practically every requirement. It also supplies organic chemical intermediates for the de odorant, disinfectant, dyes, explosives, fine chemicals, fire works, insecticide, metal, petroleum, pharmaceutical, pho tographic, pigment, plastics, resins, rubber chemicals, soap, veterinary chemicals, and miscellaneous organic chemical industries. DYES Dyes are marketed in dry or wet form, depending on certain peculiarities or ultimate uses of the individual products. The dry dyes are generally finely divided pow ders, although there are colors marketed as small crystals, flakes or grains. The items sold in wet form vary in con sistency from solutions to thick pastes, Our dyes are sold under specific trademarks, various groups or classes of colors being given a distinctive trademark, as follows: "Acetamine" Dyes: Designates a group of azo disperse dyes specifically developed for application to acetate and especially suited to the coloration of nylon, "Orion" acrylic fiber and "Dacron" polyester fiber. "Capracyl" Dyes: Represents a group of neutral-dyeing acid colors that produce the highest possible degree of light fastness on nylon. Also suitable for dyeing wool, particu larly in blends with cellulosic fibers. "Celanthrene" Dyes: Designates a group of anthraquinone disperse dyes designed especially for dyeing ace tate and also suitable for application to nylon, "Dacron" polyester fiber and "Orion" acrylic fiber. "Chromacyl" Dyes: Describes a group of dyes that con tain chromium in the dye molecule. Suitable for wool and nylon, these dyes are characterized by ease of application and good fastness. "Diagen" Dyes: Designates a line of stabilized azoic colors that are used for printing cotton and rayon. They are tinctorially strong and have good fastness in full shades. Dyes: This group nomenclature is used to a large extent when the dye itself has a generic name. Covers most of the basic colors, and some of the acid and direct colors. "Halopont" Pigment Colors: Designates a line of pig ment colors. Used for tinting white paper. "Latyl" Dyes: A group of disperse dyes developed particu larly for coloration of "Dacron" polyester fiber, on which they have exceptionally good light- and wet-fastness proper ties. Also suitable in pastel to heavy shades for acetate on which they show high lightfastness and non-fume-fading properties. "Leucosol" Dyes: Designates a line of vat colors which have been specially prepared for textile printing. Character ized by excellent application and fastness properties. "Lithosol" Dyes and "Lithosol" Acids and Bases: Designates lines of dyes and cjiemicals specially prepared for the manufacture of lakes and organic pigments. "Lusane" Dyes (Brilliant Blue B): A special dye for cotton, with outstanding brilliancy of shade and light fastness. "Luxol" Dyes: Designates a line of spirit- and lacquersoluble dyes. Used in lacquers, wood stains, stamp inks, ball point pen inks, etc. "Monastral" Pigments: Designates a type of insoluble pigments, producing extremely bright shades of blue and green with excellent fastness properties and high tinctorial strength. Used in the lake, wallpaper, paper, textile and other industries. "Naphthanil" Dye Bases: Products used in combination with the various "Naphthanil" prepares to form insoluble azo dyes. Prior to coupling the bases must first be diazotized to form the diazo salt. Widely used on cotton and rayon textiles. 55 DUP210010687 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION Oil Colors: Oil-soluble dyes used for a variety of purposes in which the prime requirement is good solubility in oils, waxes and similar materials. Paper Whites: Designates fluorescent white dyes espe cially designed for improving the whiteness or brilliance of white papers. "Ponsol" Dyes: Designates a line of anthraquinone vat dyes. Used for the dyeing and printing of cotton and rayon, and characterized by excellent fastness properties. Under controlled conditions, they can be applied to wool. Also used to a limited extent on certain dasses of paper. "Pontachrome" Dyes: Designates a line of colors for wool and nylon. Dyed by forming chromium lakes on the fiber. Used largely on materials such as men's suitings and overcoatings. "Pontacyl" Dyes: Designates a line of acid colors for wool, nylon, silk, and "Orion" acrylic fiber. Dyed in an acid bath. Produce bright shades and are used largely on materials for women's wear, bathing suits, sweater yams, upholstery fabrics, etc. "Pontamine" Diazo Dyes: Direct dyeing colors. After dyeing, they are diazotized and developed with various "Pontamine" developers, with resultant improvement in fastness, particularly fastness to washing. Used extensively on cellulosic fabrics which are to be printed subsequently with discharge patterns. "Pontamine" Dyes: Designates a line of colors dyed directly in a water bath containing a salt. Used extensively in the textile industry for dyeing most classes of fiber; also applied on paper and leather. "Pontamine" Fast Dyes: Direct dyeing colors of excep tionally good fastness to light. "Pontamine" Whites: Designates fluorescent whitening agents that produce brilliant optical bleaches having out standing wetfastness properties when applied to cotton and rayon. Also used in soaps, detergents, etc. "Roracyl" Dyes: Represents a group of soluble dyes that have good affinity and fastness properties on "Orion" acrylic fiber. They are used with selected acid dyes in many instances. "Rotalin" Dyes: Designates a line of spirit-soluble print ing colors. Used principally in the printing of glassine and other types of paper and cellophane. "Sevron" Dyes: Designates a line of cationic dyes espe cially suited for dyeing "Orion" acrylic fiber, having out standing fastness properties on this fiber. "Sulfanthrene" Dyes: Designates a line of thioindigoid vat dyes characterized by good fastness properties. Used principally for the dyeing and printing of cotton, rayon and silk. "Sulfogene" Dyes: Designates a line of sulfur colors; dyed from a solution of sodium sulfide. Used extensively on cotton work-clothing fabrics and to a limited extent on rayon and other materials. " Vantasol" Dyes: Represents a line of vat dyes especially designed for use in the Savagraph printing process for printing cotton and rayon. 56 DYEING AUXILIARIES "Acetamine" Developer--AD Extra: Designates a product used as a developing agent in the application of the diazo type dyes, principally blacks, to acetate fiber. "Alkanol" LN Surface Active-Agent: Clear light yellow liquid. Us e : To minimize barre problem when acid dyes are applied to nylon filament fabrics. r------ r _!..*:____ \ ---cu--- avai ac o> j u h h x i u ii> j j iv /'-ii-iu .l a-l l i i_m.h i i i_i i use as durable protective agent against atmospheric fading of dyed acetate. Beta Naphthol: Designates a developing agent used in the dyeing of diazo or developed colors. "Catalite" Paste: An anthraquinone of special quality, used as a catalyst in the discharge printing of certain azoic and vat dyes. Hydrosulfite Concentrated (Sodium Hydrosulfite): White free flowing powder; hygroscopic; readily soluble in water. This product is used as a reducing agent in the dyeing of vat colors and also for the removal of color from previously dyed materials. "Latyl" Carrier A: White powder. Us e: To increase the dyeability of "Dacron" polyester fiber. "Naphthanil" Azoic Compounds: Designates a line of azoic compounds used on cotton and rayon as a prepare prior to combining with the various "Naphthanil" dye bases and diazo colors to form insoluble dyes (See pages 55, 56). Also combined directly with the diazotized bases to produce organic pigments for the lake and finishes industry. "Pontamine" Developers TN, ZN and MPD: Desig nates products used as developing agents in the application of the diazo types of dyes. Used generally on textile fibers other than wool and acetate. SURFACE ACTIVE AGENTS (Wetting, Dispersing, Scouringand Emulsifying Agents) "Alkanol" B Surface Active Agent: Light creamcolored powder. Us e: As a wetting and dispersing agent, particularly with dyes, and as a surface tension reducing agent in the paper, leather, pigment and metal processing industries. "Alkanol" Crude Solution Surface Active Agent-- Alkylnaphthalene Sodium Sulfonate: Clear light yel low liquid. Us e: As a wetting and dispersing agent. "Alkanol" DW Solution Surface Active Agent: Clear light yellow liquid. Us e: A detergent with wetting and dispersing qualities for general use; resistant to hard water, acids and alkalies. "Alkanol" S Flakes Surface Active Agent: Light creamcolored powder. Us e : As a dispersing and solubilizing agent. "Alkanol" WXN Surface Active Agent: Clear light yellow liquid. Us e: As a wetting agent with rewetting properties. "Alkanol" 189-S Surface Active Agent--Saturated Hydrocarbon Sodium Sulfonate: Light yellow liquid. Us e: As a wetting and penetrating agent; retains its activity in hard water, acid and alkaline solutions. DUP210010688 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Duponol" 80 Surface Active Agent: Sodium salt of technical octyl alcohol sulfate. Light yellow liquid. Us e: As a wetting and penetrating agent particularly effective in the presence of high concentrations of electrolytes. "Duponol" C Sodium Lauryl Sulfate U. S. P.: White powder. Meets requirements of U. S. P. XIV for sodium lauryl sulfate. Us e: As emulsifying and dispersing agent for cosmetic, dental and medical preparations. "Duponol" D Paste Surface Active Agent: Sodium salt of unsaturated long chain alcohol sulfate. Yellow paste. Us e: Powerful scouring, emulsifying, dispersing and wet ting agent and detergent. "Duponol" EP Surface Active Agent: Alkylolamine salt of saturated long chain alcohol sulfate. Light yellow viscous liquid. Us e: As a detergent, wetting, dispersing and emulsifying agent having excellent solubility, color stability and foaming properties, particularly suitable for shampoos. "Duponol" G Surface Active Agent: Amine salt of saturated long chain alcohol sulfate. Oil-soluble light yellow paste. Us e : Powerful emulsifying agent for oils and solvents. "Duponol" L-144-WDG Surface Active Agent:Sodium salt of a modified unsaturated long chain alcohol sulfate. Reddish-brown liquid. Us e: Kmulsifying in dry cleaning and fungicidal sprays. "Duponol" LS Paste Surface Active Agent: Sodium salt of unsaturated long chain alcohol sulfate. Light yellow fluid paste. Us e: Scouring and emulsifying agent in leather and textile industries. "Duponol" ME Dry Surface Active Agent--Powder: Sodium salt of technical lauryl alcohol sulfate containing minimum electrolyte. White powder. Us e: As emulsifying and dispersing agent in metal cleaning, electroplating, textile and leather processing. "Duponol" OS Surface Active Agent: "Duponol" G plus long chain unsaturated alcohol. Clear yellow oilsoluble liquid. Us e: Very effective emulsifying agent for preparing oil-in-water emulsions. "Duponol" SN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. Clear light yellow liquid. Us e: As a detergent, wetting, dispersing and emulsi fying agent with exceptionally high foaming power de signed for use in shampoos and hand cleaners. "Duponol" ST Surface Active Agent: Alkylolamine salt of saturated long chain alcohol sulfate. Light yellow liquid. Us e: Preparation of liquid shampoos. "Duponol" WA Dry Surface Active Agent--Flakes: Sodium salt of technical lauryl alcohol sulfate. Light yellow flakes. Dry form of "Duponol" WA Paste. "Duponol" WA Paste Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. Viscous white paste. Us e: As a detergent, wetting, dispersing and emulsifying agent in cosmetics, metal, leather, building materials, paper, pigment and cleaning compound industries, and in shampoos. "Duponol" WAQ Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. Fluid white paste. Us e: More fluid form of "Duponol" WA Paste designed pri marily for shampoos. "Duponol" WAT Surface Active Agent: Alkylolamine salt of long chain alcohol sulfate. Clear yellow viscous liquid. Us e: As a detergent, wetting, dispersing and emulsifying agent of high solubility and good foaming, particularly suitable for shampoos. "Duponol" WS Surface Active Agent: "Duponol" G plus long chain saturated alcohol. Light cream-colored waxy solid. Us e: A wax-soluble emulsifying agent for preparing water-in-oil emulsions. "Duponol" XL Surface Active Agent: Modified long chain alcohol sulfate. Clear light yellow colored liquid. Us e: Shampoo base for high quality clear liquid shampoos. "Petrowet" R Surface Active Agent: Light yellow liquid. A wetting and penetrating agent effective in high concentrations of electrolytes and especially for use in 15% hydrochloric acid for oil-well acidizing. "Petrowet" WN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. Light yellow liquid. Us e: For wetting and penetrating in acid solution. TEXTILE SPECIALTIES "Alkanol" HC Surface Active Agent: Nonionic waxy solid. Us e: As a detergent, dispersing and emulsifying agent. "Alkanol" HCS Surface Active Agent: Nonionic fluid paste. Us e: As a detergent, dispersing and emulsifying agent. Pitch dispersing agent and penetrant in paper pulp production. "Alkanol" HGN Textile Processing Agent: Saturated hydrocarbon sulfonate composition. Clear light yellow liquid. Us e: As a wetting agent for conditioning and wet twisting of yam. Possesses limited fungicidal properties. "Alkanol" WXN Surface Active Agent: (See Surface Active Agents, Page 56.) "Aridex" L Concentrated Renewable Water Repel lent: Stable white dispersion. Us e: As a water repellent for textiles. "Aridex" WP Renewable Water Repellent: Stable white dispersion possessing maximum exhausting proper ties on textiles. "Avitex" AD Surface Active Agent: Clear reddishbrown liquid. Us e: As a penetrating agent for textile dyeing and finishing. "Avitex" C Softener: Light cream-colored paste. Us e: As a textile softening and finishing agent primarily for use on cotton; and as paper coating plasticizer. "Avitex" FB Antistatic Developer: Light yellow to brown translucent gel. Us e: As an exhausting agent for "Zelec" DX durable antistatic agent. Produces a soft, dry, non-tacky finish having an excellent antistatic effect. "Avitex" K Durable Softener: Nonionic white paste. Us e: Softener and modifier for resin finishes in cellulosic fiber fabrics. "Avitex" NA Softener: Cationic light tan paste. Us e: For softening and antistatic effects on all fibers. "Avitex" R Softener: Cationic light tan paste. Us e: For softening and antistatic effects on all synthetic fibers. 57 DUP210010689 ORGANIC CHEMICALS DEPARTMENT DYES AND CHEMICALS DIVISION "Avitex" SF Softener: White paste. Us e : As a textile softening and finishing agent giving a less oily hand than "Avitex" C softener. Primarily for use on synthetics. "Avitex" W Softener: White paste. Us e: As a softening and finishing agent on synthetic textiles to obtain a waxy hand. "Avitone" A Softener: A saturated hydrocarbon sodium sulfonate composition resistant to oxidation, discoloration and rancidity. Light tan paste. Us e : As a leather finishing agent; softener in paper coatings; cotton finishing agent as a pure finish, or as a softener and plasticizer for starch and thermoplastic resins. "Avitone" AL Softener: Similar to "Avitone" A softener with added lubricity to improve sewability for cotton and synthetics. "Avitone" SR Softener: An anionic hydrocarbon sodium sulfonate type product. Light tan paste. Us e : Softener for textiles particularly where absorbency is desired. "Avitone" T Softener: An anionic hydrocarbon sodium sulfonate type product. Semi-fluid paste. Us e : Softener for toweling and denims and pasting agent for disperse dyes. Results in highly absorbent finishes. "Duponol" D Paste Surface Active Agent: (See Surface Active Agents, Page 57.) "Duponol" LS Paste Surface Active Agent: (See Surface Active Agents, Page 57.) "Duponol" RA Surface Active Agent: Anionic liquid. Us e : Excellent scouring, emulsifying, dispersing and wetting agent. "Duponol" WA Dry Surface Active Agent--Powder: (See Surface Active Agents, Page 57.) "Duponol" WA Paste Surface Active Agent: (See Surface Active Agents, Page 57.) "Hydraphtal" Textile Processing Agent: Light yellow liquid combining solvent and scouring properties. Us e: For heavy duty degreasing of textiles and leather. "Merpentine" Surface Active Agent: Red-brown liquid with good wetting and solvent properties. Us e: As a wet ting and scouring agent in the yarn dyeing and leather industries, "Merpol" B Surface Active Agent: Yellow liquid. Wetting, penetrating, leveling, dispersing and homoge nizing agent. Us e : As a kier boiling assistant in the textile industry. "Merpol" C Surface Active Agent: Clear yellow liquid. Cleansing, dispersing, penetrating and emulsifying agent. Us e: As a solvent, penetrant, boiling off and dyeing assistant in the textile and leather industries. "Merpol" F Surface Active Agent: Clear amber liquid. Us e: As a dyeing assistant particularly for rawstock, beam and package dyeing. Low foaming. "Methacrol" Lubricant C: Light cream-colored cati onic acidic dispersion. Us e: As boarding lubricant for nylon hosiery. 58 "Methacro!" FF Resin Dispersion: Light cream-colored acidic dispersion of thermoplastic resin. Us e : As a stiffen ing finish for cellulosic and hydrophobic fibers. "Methacrol" FNH Resin Dispersion: Light creamcolored acidic dispersion of thermoplastic resin substantive to all fibers. Us e : In finishing low denier nylon hose to impart body. "Methacrol" Lubricant K: Light cream-colored cati onic acidic dispersion. Us e: As boarding lubricant with softening properties for nylon hosiery. "Methacrol" NH Resin Dispersion: Light cream-colored acidic dispersion of thermoplastic resin substantive to nylon fiber. Us e : In finishing nylon hose to impart snag resistance. "Nalan" RF Durable Water Repellent: Light creamcolored viscous paste dispersion. Us e: Along with thermo setting resins as a softener modifier to obtain improved crease resistance and wash-and-wear properties on cotton fabric. "Neomerpin" N Surface Active Agent--Aromatic Sulfonic Acid: Brown liquid. Us e: As a wetting and penetrating agent for use in acid media by the textile and leather industries. "Ondal" A Oxidizing Agent: White powder. Us e; For one-bath oxidizing and soaping of vat colors in the textile industry. Product BCO Surface Active Agent--Cetyl Betaine:An amphoteric amber liquid showing cationic properties inacidic solutions and anionic properties in alkaline solutions. Us e ; As a wetting agent, detergent and dyeing assistant particu larly effective in alkaline peroxide bleaching processes and other operations employing high concentrations of acids or alkalies. Retarder LAN Surface Active Agent: Cationic amber liquid. Us e : In acid and electrolyte solutions; dye retarding and stripping agent primarily for use with azoic colors. "Shirlan" Extra Industrial Fungicide--Technical Salicylanilide: Light cream-colored powder. Us e: As a fungicide for general industrial use where low toxicity to humans is essential. "Shirlan" A Industrial Fungicide--Dispersed Sali cylanilide: Cream-colored aqueous dispersion of "Shirlan" Extra. Us e : For imparting mildew resistance to textiles. Particularly designed for use with "Aridex" water repellents. "Shirlan" D Industrial Fungicide--Dispersible Sali cylanilide: Cream-colored powder. Water dispersible form of "Shirlan" Extra. Us e : For imparting mildew resistance to yarn or fabric in sizing or finishing mix. "Sitol" Flakes Oxidizing Agent--Sodium Salt of Nitrobenzene Meta Sulfonic Acid: Cream-colored pow der. Us e : As a protective oxidizing agent in discharge printing. Spinning Lubricant L: Pale yellow liquid. Us e: As a textile spinning lubricant with antistatic properties. "Tetralin" Solvent--Tetrahydronaphthalene -- CioH12: Water-white liquid. Us e : In the textile, soap and manufactured gas industries, and as a chemical inter mediate. T DUP210010690 DYES AND CHEMICALS DIVISION "Zelan" AP Paste Durable Water Repellent: A long chain nitrogen complex. Tan paste. Us e: For mill appli cation, to impart to fabrics water, spot and stain resistance, retained after repeated laundering or dry cleaning. "Zelan" FF Durable Water Repellent: A long chain nitrogen complex. White paste. Us e: For mill application to impart water, spot and stain resistance to heavy pile fabrics, corduroys, etc., retained after repeated laundering or dry cleaning. "Zelec" DP Durable Antistatic Agent: Stable, fluid, milky dispersion. Us e : To reduce static electricity in synthetic fibers and fabrics, remaining effective through repeated launderings with soap. "Zelec" DX Durable Antistatic Agent: Light-colored translucent, viscous paste. Us e: To reduce static electricity in synthetic fibers and fabrics, remaining effective through repeated launderings with soap. "Zelec" NE Non-Durable Antistatic Agent: Ambercolored translucent, viscous paste. Us e : To reduce static electricity in processing synthetic fibers and fabrics. Finish is readily removed by laundering and has no effect on sub sequent finishing or dyeing operations. "Zelec" NK Non-Durable Antistatic Agent: Anionic composition of alcohol phosphates. Amber-colored trans lucent paste. Us e: To reduce static electricity in processing synthetic fibers and fabrics. Finish is readily removed by laundering and has no effect on subsequent finishing or dyeing operations. More oil soluble than "Zelec" NE. "Zencton" CR Resin Finish: A clear solution of thermo setting resin. Us e: In finishing textiles to impart crease resistance, dimensional stability and hydrophobic charac teristics. "Zeset" Fabric Stabilizer: A clear solution of a chem ical which will react with cellulosic materials. Us e: In finishing textiles and other fibers to impart crease resis tance, dimensional stability andhydrophobic characteristics. "Zoron" WS Resin Finish: Wet strength resin for paper. May be applied to finished paper on the dry end of the machine. LEATHER SPECIALTIES "Duponol" LS Paste Surface Active Agent: (See Surface Active Agents, Page 57.) "Hydraphtal" Textile Processing Agent: (See Textile Specialties, Page 58.) "Merpentine" Surface Active Agent: (See Textile Specialties, Page 58.) "IVIerpol" C Surface Active Agent: (See Textile Special ties, Page 58.) "Methacrol" LB Resin Dispersion: Anionic alkaline dispersion of unplasticized thermoplastic resin. Light ORGANIC CHEMICALS DEPARTMENT cream-colored liquid. Us e: As a base for seasoning to obtain a hard top finish for leather and leather articles. "Methacrol" LBM Resin Dispersion: Anionic alkaline dispersion of moderately plasticized thermoplastic resin. Light cream-colored liquid. Us e: As a base for seasoning to obtain a flexible finish for leather and leather articles. "Methacrol" LBP Resin Dispersion: Anionic alkaline dispersion of highly plasticized thermoplastic resin. Light cream-colored liquid. Us e: As a base for seasoning to obtain a soft flexible finish for leather and leather articles. "Neomerpin" N Surface Active Agent--Aromatic Sulfonic Acid: (See Textile Specialties, Page 58.) "Zoron" TR Polymer Emulsion: Anionic alkaline dis persion of unplasticized thermoplastic resin. Light creamcolored liquid. Us e: As a base for seasoning to obtain a glossy top finish for leather and leather articles. MISCELLANEOUS SPECIALTIES "Aridex" DCN Renewable Water Repellent: White crystalline paste, soluble in petroleum solvent. USE: As water repellent particularly after dry cleaning with petroleum solvent. "Aridex" L Concentrated Renewable Water Repel lent: Stable white dispersion. Us e: As water repellent after laundering. (See Textile Specialties, Page 58.) "Decalin" Solvent--Decahydronaphthalene--Ci0Hi8: Water-white liquid. Us e: As a solvent and as a chemical intermediate. "Duponol" L-142 Surface Active Agent--Fatty Al cohol Sodium Sulfate: Sodium salt of saturated long chain fatty alcohol sulfate. White powder. Us e: To impart emollient effects in cosmetic preparations. "Ocenol" Technical Oleyl Alcohol: Light yellow liquid. Us e : As a chemical intermediate. "Shirlan" Extra Industrial Fungicide--Technical Salicylanilide: (See Textile Specialties, Page 58.) "Tetralin" Solvent--Tetrahydronaphthalene-- CioH 12: (See Textile Specialties, Page 58.) "Zelcon" C Fabric Conditioner: Cationic fabric softener and conditioner, 100% active, viscous amber fluid. Us e: As the active ingredient in compounded home laundry fabric softeners and conditioners. MISCELLANEOUS PRODUCTS MBT (2-Mercaptobenzothiazole): Corrosion inhibitor. Powder form. Oil free. Sodium MBT 50% Solution: A 50% water solution of sodium mercaptobenzothiazole of high purity. Us e: Cor rosion inhibitor for anti-freeze. The Intermediate Organic Chemicals of the Dyes and Chemicals Division are listed in alphabetical order throughout the Alphabetical Section. 59 DUP210010691 ORGANIC CHEMICALS DEPARTMENT "FREON" PRODUCTS DIVISION GENERAL OFFICE: Nemours Building Wilmington 98, Delaware DISTRICT OFFICES: Chicago 3, Illinois New York 13 New York Palo Alto, California 7 South Dearborn Street 40 Worth Street 701 Welch Road PLANTS: Carneys Point, New Jersey Louisville, Kentucky East Chicago, Indiana Antioch, California TELEPHONE PRospect 4-1000 ANdover 3-7000 COrtlandt 7-3965 DAvenport 6-2840 PRODUCTS "Freon" fluorinated hydrocarbon products are readily available for use in refrigeration and air conditioning equip ment as original and replacement charges; for aerosol propellent uses; for solvents and for other miscellaneous chemical uses. Those interested are requested to contact our Wilmington or nearest district office for full information regarding the products' usage and nearest stocking points. "Freon" fluorinated hydrocarbons are clear and water white; odors of vapors are mild and somewhat ethereal but disappear when mixed with air; nonirritating to the eyes, nose, throat, lungs and skin; nontoxic, nonflammable, non explosive, noncorrosive, stable and inert. "Freon-11" or "F-ll" Refrigerant or Propellent-- Trichloromonofluoromethane--CCI3F: B. P. 74.8F. (23.8C.) at 760 mm. Us e : As a refrigerant in industrial and commercial air conditioning systems; also, in industrial process water and brine cooling to --40F. (--4QC.) employing single or multistage centrifugal type compressors of 100 tons refrigeration capacity and larger. As brine re frigerant in indirect low temperature systems to --150F. (--101.1C.). Solutions of "Freon-11" and "Freon-12" are used as propellents for a wide variety of aerosol products. Can be tailored to individual pressure requirements from 1 to 69 lb./sq. in. gauge at 70-F. (21.1C.). CONTAINERS: 100- and 200-lb. drums, 2,200-lb. tanks, tank trailers, tank cars. "Freon-12" or "F-12" Refrigerant or Propellent-- Dichlorodifl uoro me thane--CCI2F2: B. P. --21.6F. (--29.8C.) at 760 mm. Us e : As a refrigerant in both direct and indirect industrial, commercial, household and auto motive air conditioning systems; also, in household re-' frigerators, ice cream cabinets, frozen food cabinets, food locker plants, water coolers, etc., employing reciprocating type compressors ranging in size from fractional to 800 horsepower. "Freon-12" is also used in household refriger ating systems, ice cream and frozen food cabinets employing rotary vane type compressors. "Freon-12" is used in in dustrial process water and brine cooling to --11QF. (--78.9C.) employing multistage centrifugal type com pressors in cascade of 100 tons refrigeration capacity and larger. "Freon-12" is used as a propellent for high pressure aerosols such as those containing insecticides. Also for surface-coating products such as metallic and pigmented paints and lacquers. Solutions of "Freon-12" with other "Freon" products are used as aerosol propellents for a wide variety of products; also as low temperature solvents. Pressure--70 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 10-, 25- and 145-lb. cylinders, 2,000-lb. tanks, tank trailers and tank cars. "Freon-13" or "F-13" Refrigerant--Monochlorotrifluoromethane--CCIF3: B. P. -- 114.6F. (--81.4C.) at 760 mm. Us e: As a refrigerant in both direct and indirect industrial extremely low temperature cascade systems ranging in size from fractional to 100 horsepower, employ ing reciprocating or rotary compressors; aircraft environ mental test chambers; shrink fit, toughening and hardening of metals; pharmaceutical processing. Pressure--459 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 5-, 9-, 23- and 80-lb. cylinders. "Freon-13Bl" or "F-13B1" Refrigerant or Fire Ex tinguishing Agent--Monobromotrifluoromethane-- CBrF3: B. P. --72.0F. (--57.8C.) at 760 mm. Us e: As a fire extinguishing agent. As a refrigerant in both direct and indirect industrial low temperature cascade or multiple compression systems ranging in size from fractional to 100 horsepower, employing reciprocating or rotary compressors;' aircraft environmental test chambers; shrink fit, toughen ing and hardening of metals; pharmaceutical processing. Pressure--199 lb./sq. in. gauge at 70F. (21.1C.). Co n t a in e r s : 6-, 10-, 28- and 100-lb. cylinders. "Freon-22" or "F-22" Refrigerant or Propellent-- Monochlorodifluoromethane--CHClFg: B. P. --41.4F. (--40.8C.) at 760 mm. Us e : As a refrigerant in industrial and commercial low temperature refrigerating systems em ploying reciprocating type compressors; for low tempera ture refrigerating systems employing centrifugal type com pressors. Solutions of "Freon-22" with "Freon-11" and "Freon-12" are used as propellents for aerosol products requiring special solvent and pressure qualities. Chemical intermediate for plastics manufacture; also used as a low temperature solvent. Pressure--Approximately 122 lb./sq. in. gauge at 70F. (21.1C.). Co n t ain e r s : 9-, 22-, 125-lb. cylinders and 1,750-lb. tanks, tank trailers, tank cars. DUP210010692 ORGANIC CHEMICALS DEPARTMENT "FREON" PRODUCTS DIVISION "Freon-113" or "F-113" Refrigerant or Propellent-- Trichlorotrifluoroethane--CCbFCCIFj: B. P. 117.6F. (47.6C.) at 760 mm. Us e : As a refrigerant in industrial and commercial air conditioning systems; also, in industrial process water and brine cooling to 0F. (--17.8C.) em ploying four or more stage centrifugal type compressors of 25 tons refrigeration capacity and larger. "Freon-113" is used with other "Freon" compounds as a propellent for aerosol products. Especially applicable for oxygen-contain ing products where special solvent qualities are needed. Co n t ain e r s : 100- and 200-lb. cylinders, 2,200-lb. tanks, tank trailers and tank cars. "Freon-114" or "F-114" Refrigerant or Propellent-- Dichlorotetrafluoroethane--CCIF2CCIF2:B. P. 38.4F. (3.6C.) at 760 mm. Us e : As a refrigerant in fractional horsepower household refrigerating systems and drinking water coolers employing rotary vane type compressors; also, in indirect industrial and commercial air conditioning systems and in industrial process water and brine cooling to --70F. (--56.7C.) employing multistage centrifugal type compressors of 100 tons refrigeration capacity and larger. As high stability heat transfer medium. Solutions of "Freon-114" and "Freon-12" are used as propellents for aerosol products where active ingredients require extreme stability--cosmetics, for example. Provide pressures from 12 to 69 lb./sq. in. gauge at 70F. (21.1C.). CONTAINERS: 10-, 25-, 150-lb. cylinders and 2,200-lb. tanks, tank cars. "Freon"-MF Solvent--Trichloromonofluoromethane --CCI3F: B. P. 74.8F. (23.8C.) at 760 mm. F. P. --168F. (--111C.). Us e: As a cleaner for hermetic motor com pressors, oxygen storage tanks, etc. In blends as a cleaner for motion picture and television film, lithographic plates, typewriters, etc. As a flash point retarder for flammable solvents. It is also used as an inert, noncorrosive brine. Co n t a in e r s : 10-, 20- and 55-gal. nonretumable drums, 2,200-lb. returnable cylinders, tank cars and tank trucks. "Freon"-TF Solvent--Trichlorotrifluoroethane-- CCI2F-CC1F2: B. P. 117.6F. (47.6C.) at 760 mm. F. P. --31F. (--35C.). Us e: As a solvent; as a vapor degreasing solvent, cleaner for mechanical and electrical controls, precision instruments and gauges, hermetic motors and compressors, large motors and generators, motion picture and television film, magnetic sound tape, printed circuits, and as a flash point retarder in blends. Co n t a in e r s : 10-, 20- and 55-gal. nonretumable drums, tank trucks and tank cars. 61 DUP210010693 ORGANIC CHEMICALS DEPARTMENT PETROLEUM CHEMICALS DIVISION i GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 SALES OFFICES: Chicago 3, Illinois Cleveland 15, Ohio Houston 2, Texas Los Angeles 17, California New York 20, New York Philadelphia 2, Pennsylvania Pittsburgh 19, Pennsylvania San Francisco 4, California Seattle 3, Washington Tulsa 19, Oklahoma 8 South Michigan Avenue Suite 305 Republic Building, 25 Prospect Avenue 705 Bank of Commerce Building Suite 425, 612 South Flower Street 45 Rockefeller Plaza 3 Penn Center Plaza Room 751, 1 Gateway Center Room 626, 111 Sutter Street Room 215, 4003 Aurora Avenue 1811 South Baltimore Avenue RAndolph 6-8630 Superior 1-1363 CApitol 5-1151 MAdison 4-1354 COlumbus 5-2342 LOcust 8-3531 ATlantic 1-2933 EXbrook 2-1934 MElrose 2-6977 LUther 5-5578 PLANTS: Antioch, California Carneys Point, New Jersey SHIPPING POINTS: TETRAETHYL LEAD COMPOUNDS ADDITIVES Amarillo, Texas (1) Antioch, California (3) Fort Worth, Texas (1) Houston, Texas (1) Billings, Montana Carneys Point, New Jersey Beaumont, Texas (2) Bellevue, Ohio (l) Kansas City, Missouri (1) Lake Charles, Louisiana (1) Chicago, Illinois Houston, Texas f f Carneys Point, New Jersey (3) Corpus Christi, Texas (1) Minneapolis, Minnesota (1) New Orleans, Louisiana (l) Kansas City, Missouri Los Angeles, California I ! j; Cut Bank, Montana (l) East Chicago, Indiana (1) East St. Louis, Illinois (1) Salt Lake City, Utah (l) Texas City, Texas (1) Toledo, Ohio (1) Mt. Vernon, Washington 6I; El Monte, California (2) Torrance, California (1) i Femdale, Washington (2) i (1) Tank Cars (2) Tank Cars and Tank Trucks (3) Tank Cars, Tank Trucks, and Drums \ i I; PRODUCTS !' DMF Antistall Additive--Dimethyl Formamide Tech Fuel Oil Additive No. 208: Amixture of Fuel Oil Additive nical--HCON(CH3)2: Colorless liquid, readily soluble in No. 2 (92 parts) and Metal Deactivator (8 parts). Us e : gasoline. Us e : In concentrations up to 0.1% to prevent Same as Fuel Oil Additive No. 2. Co n t a in e r s : 55-gal. engine stalling during cool humid weather conditions. (375-lb.) steel drums. Co n t a in e r s : 5-, 55-gal. drums, tank trucks, tank cars. Fuel Oil Additive No. 2: A viscous, light amber, ashless liquid. Miscible in No. 2 fuel oil in all proportions. Sp. Gr. 0.90. Us e: At concentrations of 0.003 to 0.02% by weight in household heating and diesel oils to decrease the rate of Fuel Oil Additive No. 212: A mixture of Fuel Oil Additive No. 2 (88 parts) and Metal Deactivator (12 parts). Us e : Same as Fuel Oil Additive No. 2. Co n t a in e r s : 55-gal. (375-lb.) steel drums. insoluble residue formation by its antioxidant effect and to Gasoline Antioxidant No. 5: A solution of N-n-butyl-p- reduce filter clogging by its dispersant action. It also has aminophenol in alcohols having the following weight rust preventive properties. Co n t a in e r s : 55-gal. (375-lb.) steel drums. composition: Fuel Oil Additive No. 7: A viscous, light amber, ashless liquid. Miscible in No. 2 fuel oil in all proportions. Sp. Gr. 50% N-n-butyl-p-aminophenol HOCeH^NHCiHg 30% Anhydrous isopropanol (CH3)sCHOH 0.86. Us e: At concentrations of 0.003 to 0.02% by weight in 20% Anhydrous methanol CH3OH household heating and diesel oils to decrease the rate of insoluble residue formation by its stabilizing effect and to The solution is readily soluble in gasoline in normal use reduce filter clogging by its dispersant action. Co n t ain concentrations. The use of benzene or other aromatic e r s : 55-gal. (375-lb.) steel drums. solvent is recommended for preparation of concentrated DUP210010694 ORGANIC CHEMICALS DEPARTMENT PETROLEUM CHEMICALS DIVISION solutions. Sp. Gr. 0.90. Us e : For reducing the formation of gum and precipitation of lead in gasoline. Concentra tion required 0.002 to 0.01% by weight. Co n t ain e r s : SS-gal. (400-lb.) steel drums. Gasoline Antioxidant No, 22: N,N'-Di(sec.-butyl)-pphenylenediamine [C6H4[NHCH(CH3)(C2H5)]2] containing no solvent. A mobile liquid readily soluble in gasoline in all proportions and at all operating temperatures; Sp. Gr. 0.94. Us e: For retarding the formation of gum and precipi tation of lead in gasoline. Concentration required 0.001 to 0.005% by weight. Co n t a in e r s : 55-gal. (425-lb.) steel drums. Antioxidant No. 29--2,6-Di-tertiary butyl-4-methyl phenol--CH3Cs H2[C(CH3)s ]20H: Alight colored, finely divided solid; non-coloring and readily soluble in oils; Sp. Gr. 1.04. Us e: In turbine, transformer and hydraulic oils, waxes and greases to retard oxidation and in gasoline to reduce the formation of gum and precipitation of lead. Concentration required 0.003 to 0.015% by weight. Co n t a in er s : 100-lb. fiber drums. Gasoline Colors: Hydrocarbon soluble dyes for imparting distinctive colors to gasoline and other petroleum products. Co n t a in e r s : 100-lb. fiber drums. Oil Blue A --Essentially 1,4-Di(isopropylamino)anthraquinone Oil Bronze --A blend of Oil Red and Oil Orange Oil Orange --Essentially Phenylazo-2-naphthol Oil Red --Essentially Methyl derivatives of azo- benzene-4-azo-2-naphthol Oil Yellow N--Essentially p-Dimethylaminoazobenzene Lube Oil Additive 564: Solution of methacrylate poly mers containing basic nitrogen in light neutral oil. Den sity 7.5 lb. per gal. Us e: To provide detergency for motor oils, particularly under low-temperature, low-power, stopand-go driving conditions, and to improve viscosity index. Concentration required averages 2% and varies somewhat with the properties of the base oil and supple mentary additives used. Co n t a in e r s : 55-gal. (375-lb. net) drums and 4,000-, 6,000- and 8,000-gal. tank cars. Metal Deactivator: An 80% solution of active in gredient in an aromatic solvent. The active ingre dient is principally N,N'-disalicylidene-l, 2 -propanediamine [HOC8H4CHNCH2CH(CH3)NCHC6HtOH]. Normally a dark amber liquid; may crystallize during prolonged stor age. Readily soluble in gasolines and other hydrocarbon oils above 25C. Miscible with Gasoline Antioxidants and Fuel Oil Additive No. 2. Sp. Gr. 1.08. Us e: For improving storage and color stability of petroleum distillates contain ing dissolved copper. It is particularly useful as an adjunct to Gasoline Antioxidants and Fuel Oil Additive No. 2. Concentration required 0.0002 to 0.002% by weight. Co n t a in e r s : 30-gal. (260-lb.) steel drums. Metal Deactivator No. 2: A 50% solution of the same active ingredient as in Metal Deactivator but having better resistance to crystallization. Us e : Same as Metal De activator. Co n t ain e r s : 30-gal. (250-lb.) steel drums. Metal Deactivator No. 3: A 66%% solution of the same active ingredient as in Metal Deactivator but having more favorable crystallization properties. Us e: Same as Metal Deactivator. Co n t a in e r s : 30-gal. (250-lb.) steel drums. "Ortholeum" 162 Lubricant Assistant: A mixture of mono- and di-alkyl phosphates (RH2PO4 and RBHP04). Light brown viscous liquid; freezing point about 15C.; Sp. Gr. 0.99; miscible with oil in all proportions. Us e : In oils to improve film strength and to impart rust pre ventive properties. Concentrations vary with nature of applications. Co n t a in e r s : 55-gal. (425-lb.) steel drums. "Ortholeum" 300 Grease Stabilizer: Mixture of com plex aromatic amines providing a combination of an anti oxidant and a metal deactivator action. It is a tan-colored, flaked product. Us e : As a stabilizer for greases. Concentra tion required is usually 0.1 to 1.0% by weight. Co n t a in e r s : 175-lb. fiber drums. Phenyl-alpha-naphthylamine--C10H,NHC0H5: Lem on-yellow lumps and irregular pellets up to J4 in. diameter; Sp. Gr. 1.17. Normal concentration.--up to 0.5% in oils, up to 1.0% in greases. Us e : As a stabilizer for greases, transformer oils and turbine oils. Phenyl-beta-naphthylamine--C10HrNHC6Hs: A yel low-gray pewder; Sp. Gr. 1.18. Us e : As a stabilizer for greases and lubricating oils. Concentration--up to 0.5% in greases; up to limit of solubilities in oils. Co n t ain e r s : 51-gal. (160-lb.) fiber drums. Rust Preventive No. 2: 80% Active ingredient in kero sene. A straw colored liquid. Us e : As an antirust and surface active antistalling agent in petroleum distillates at concentrations up to 0.01%. Co n t a in e r s : 55-gal. (400-lb.) steel drums, tank cars. Tetraethyl Lead Compound--(C2H5)4Pb--Aviation Mix: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; Sp. Gr. 1.74. Us e: In concentrations up to 4.6 cc. TEL per gal. as an antiknock agent for aviation gasolines. Co n t a in e r s : Liter cans, 10- and 55-gal. drums, 3,000- and 6,000-gal. tank cars. Tetraethyl Lead Compound--(C2H5)4Pb--Aviation Mix--Dilute Solution: A liquid solution of Aviation Mix, a mixture of 70% xylene and 30% n-heptane; Sp. Gr. 0.96. Us e : For TEL blending of gasolines used in laboratory engine testing. The dilute solution allows greater accuracy in adding small volumes of TEL. Co n t a in e r s : Liter cans. Tetraethyl Lead Compound--(C2H5)4Pb--Motor Mix: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; Sp. Gr. 1.59. Us e: In concentrations up to 3 cc. TEL per gal. as an antiknock agent for motor gasolines. Co n t ain e r s : Liter cans, 10and 55-gal. drums, 3,000- and 6,000-gal. tank cars. Tetraethyl Lead Compound--(C2H5)4Pb--Motor Mix --A: A liquid antiknock compound the principal compo nent of which is tetraethyl lead; identical with regular Motor Mix except that its content of ethylene dibromide is 20% greater; Sp. Gr. 1.61. Us e: In concentrations up to 3 cc. TEL per gal. as an antiknock agent for motor gaso lines. Co n t a in e r s : Liter cans, 10- and 55-gal. drums, 3,000- and 6,000-gal. tank cars. 63 /Jm DUP210010695 PHOTO PRODUCTS DEPARTMENT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 DISTRICT OFFICES AND WAREHOUSES: Atlanta 8, Georgia 805 Peachtree Building TRinity 5-2841 Boston 10, Massachusetts 140 Federal Street KAncock S-1711 *Chicago 46, Illinois 4560 Touhy Avenue, Lincolnwood, Edgebrook Station ORchard 5-5500 Cleveland 16, Ohio 20950 Center Ridge Road EDison 1-0375 ; *Dallas 7, Texas 1628 Oak Lawn Avenue Riverside 1-1404 *Los Angeles 38, California 7051 Santa Monica Boulevard HOUywood 9-5147 *New York 11, New York 248 West 18th Street WAtkins 4-3100 Philadelphia, Pennsylvania 308 East Lancaster Avenue, Wynnewood, Penna. Midway 9-1420 Warehouse Location. PLANTS: Parlin, New Jersey Rochester, New York Towanda, Pennsylvania Mail to any of the above locations should be addressed to: E. I. du Pont de Nemours & Company (Inc.), Photo Products Department PRODUCTS I MOTION PICTURE PRODUCTS "Superior" 2 Negative Film, Fine Grain, Type 936A: An all purpose panchromatic negative stock for both 35 mm. SAFETY NEGATIVE FILMSf exterior and interior production work. This film has "Superior" 2 Negative Film, Fine Grain, Type 936B: extremely fine grain, medium speed, and wide latitude. An all purpose panchromatic negative stock for both ex "Superior" 4 Negative Film, Type 928A: Same as terior and interior production work. This film has extreme Type 928B. (See this page.) ly fine grain, medium speed, and wide latitude. "Superior" 4 Negative Film, Type 92SB: A super sensitive panchromatic negative film recommended for 35 mm., 32 mm. and 16 mm. SAFETY DUPLICATING FILMS both interior and exterior use wherever limited illumina Fine Grain Master Positive Film, Type 828: A fine tion levels prevail. Its special sensitivity and fine grain structure permit the use of reduced apertures where in grain positive duplicating film which can be processed in normal positive developer. Gammas in the desirable range creased depth of focus is desired in television and theatrical of 1.50 to 1.60 are obtained at standard release developing motion picture production. An excellent film for high speed times. This film has sufficient speed to permit printing in photography. the same exposure range as fine grain release positive. Reduction of contrast through emulsion manufacturing techniques rather than through use of yellow dye gives this 16 mm. SAFETY NEGATIVE FILMS material a decided speed advantage over dyed materials High Speed Rapid Reversal Panchromatic Negative Film, Type 931A: A high speed panchromatic negative stock designed especially for rapid reversal processing for and much greater resistance to scratches and abrasions. Type 828A is excellent for making low contrast TV release prints. !i use in television newsreel and sports photography. Fine Grain Panchromatic Duplicating Negative Film, Type 908: An exceptionally fine grain, high resolution Panchromatic Negative Film, Type 914A: A fine grain emulsion designed specifically for duplicating work. panchromatic film of wide latitude for interior as well as exterior work. This film may also be used as a reversal duplicating film. 35 mm. SAFETY SOUND RECORDING FILMS Sound Recording Film NH, Type 802B: A high speed lii Rapid Reversal Panchromatic Negative Film, Type VA or VD recording film. Use positive developer for VA 930A: A medium speed panchromatic negative stock de and negative developer for VD work. signed especially for rapid reversal processing for use in television newsreel and sports photography. Fine Grain VA Sound Recording Film NH, Type 833B: An improved variable area sound recording film fLctter after type number indicates film width: A= 16 mm., B=35 mm., C=32 mm. combining fine grain and maximum sensitivity. NH base reduces flare. DUP210010696 RADIOGRAPHIC PRODUCTS 16 mm. SAFETY SOUND RECORDING FILM Sound Recording Film NH, Type 802A: Same as Type 802B. 35 mm. SAFETY RELEASE POSITIVE FILM Release Positive High Speed Film, Type 803B: A high speed positive emulsion for special release work where approximately twice regular print positive speed is required. 35 mm., 32 mm. and 16 mm. SAFETY RELEASE POSITIVE FILMSf Fine Grain Release Positive Film, Type 825B: For general release work and dubbing prints which require the optimum of picture and sound quality. Image color is blue-black. Inherent noise level is exceptionally low. Emulsion is very hard, with high scratch resistance and is coated on a base of long wearing quality. Fine Grain Safety Release Positive Films, Type 825A and Type 825C: The emulsion is the same as used on Type 825B, coated on a safety base. 35 mm. SAFETY SPECIAL PURPOSE FILMS Title Stock Film, Type 805B: A high speed emulsion used in title cameras for regular title card and special effect work. Produces the sharply defined images required. Fine Grain Low Contrast Positive Film, Type 824B: A low contrast, fine grain emulsion designed for photo graphing either negative or positive images on television monitor tubes. TV Recording Film, Type 834B: A high speed, low contrast, fine grain emulsion designed for photographing either negative or positive images on television recording tubes. This film is approximately 2]4 times faster than Type 824B. 16 mm. SAFETY SPECIAL PURPOSE FILMS Fine Grain Low Contrast Positive Film, Type 824A: A low contrast, fine grain emulsion designed for photo graphing either negative or positive images on television monitor tubes. TV Recording Film, Type 834A: Same as Type 834B. This film may also be used as a reversal duplicating stock. 35 mm. LEADER STOCKS "Cronar" Polyester Photographic Film--Safety Plain 4s, Type P40B: For developing machines. Safety Black 5s Leader Stock, Type T13B: For daylight loading rolls, also "A" and "B" roll printing leader. Safety Exposed Rawstock 5s Leader Stock, Type T71Bs For leaders and trailers on motion picture reels. i'Letter after type number indicates film width: A-- 16 mm., D-- 35 mm., C = 32 mm. PHOTO PRODUCTS DEPARTMENT 16 mm. LEADER STOCKS "Cronar" Polyester Photographic Film--Safety Plain 4s, Type P40A: For developing machines. Safety Black 5s Leader Stock, Type T13A: For daylight loading rolls, also opaque leader applications. Safety Exposed Rawstock 5s Leader Stock, Type T71A: For leaders and trailers on motion picture reels. RADIOGRAPHIC PRODUCTS MEDICAL X-RAY FILMS DuPont produces four different x-ray film emulsions for the medical field, each emulsion possessing distinct char acteristics to suit it for a special use. Uniformity, abrasion resistance and ability to withstand hot weather processing are inherent in all four emulsions which are coated on blue safety base. Par Speed Film, Type 502: A double coated film of exceedingly wide latitude. Intended primarily for medical radiography with intensifying screens. All standard sizes. Co n t a in e r s : Boxes of 75 sheets interleaved. "Xtra-Fast" Film, Type 508: A double coated high speed film with maximum contrast for medical radiography with intensifying screens. Available in all standard sizes. Co n t a in e r s : Boxes of 25 and 75 sheets interleaved and 100 sheets N.I.F. (Non-Interleaved Film). "Fluoro-Film" X-ray Film, Type 560: 70 mm. fast blue sensitive film for use with the Fairchild FluoroRecord Camera in photographing the blue fluorescent screen. Available in 100-ft. rolls only. "Fluoro-Film" X-ray Film, Type 562: 70 mm. fast green sensitive film for use with the Fairchild FluoroRecord Camera in photographing the green fluorescent screen. Available in 100-ft. rolls only. INDUSTRIAL X-RAY FILMS Three special emulsions are produced for the radiography of materials. All are outstanding for their uniformity, abrasion resistance and ability to withstand hot weather processing. All are coated on blue safety base. Screen Film, Type 504: For all types of industrial work where intensifying screens are used. Available in all standard industrial sizes. Co n t ain e r s : Boxes of 75 sheets only. Fine Grain Film, Type 506: For direct exposure or ex posure using lead screens. Exceptionally fine grain, with wide exposure adaptability to all x-ray voltages and gamma radiation. Available in all standard industrial sizes. Co n t a in e r s : Boxes of 75 sheets interleaved and 100 sheets N.I.F. (Non-Interleaved Film). Very Fine Grain Film, Type 510: For direct exposure or exposure using lead screens. It has the finest grain of the Industrial Films and is approximately % the speed of Type 506. Especially suited for critical inspection of light metals 65 DUP210010697 PHOTO PRODUCTS DEPARTMENT INDUSTRIAL PRODUCTS such as aluminum, magnesium and t'neir alloys. Also used in the 1,000 to 22,000 kv. range. Co n t a in e r s : Boxes of 100 sheets N.I.F. (Non-Interleaved Film). Day Pack Films, Types 506, 508 and 510: A 200-ft. roll of 70 mm. x-ray film enclosed in a light-tight paper sleeve to permit handling and use in daylight. DOSIMETER FILMS Dosimeter Film Packets, Types 544, 552, 558 and 559: Special packets containing two films for measuring radia tion dosage. Carried by personnel subject to exposure to hazardous radiation. Co n t ain e r s : 150 "Pull-A-Tab" packets per box. Dosimeter Film Packet, Type 553: Same as above but containing three films. Dosimeter Film Packets, Types 543 and 545: Same as above but containing one film. DENTAL X-RAY FILMS Dental x-ray films have blue safety base, wide exposure latitude, antiabrasion coating over the emulsion and posi tive dot identification. Both single and double coated films come in the exclusive "Pull-A-Tab" packet, designed for easy opening and handling in the darkroom. ' Double Coated (D) Film, Type 550: An x-ray film coated with emulsion on both sides. More than twice as fast as S film. Co n t a in e r s : 25 packets per box, 1 film per packet (code 25 D-l) 25 packets per box, 2 films per packet (code 25 D-2) 150 packets per box, 1 film per packet (code 150 D-l) 150 packets per box, 2 films per packet (code 150 D-2) Lightning Fast (LF) Film, Type 555: A very fast, double coated film having the inherent speed necessary for use in the long cone technique. It is also used to advantage with low powered x-ray equipment. Co n t a in e r s : 25 packets per box, 1 film per packet (code 25 LF-1) 25 packets per box, 2 films per packet (code 25 LF-2) 150 packets per box, 1 film per packet (code 150 LF-1) 150 packets per box, 2 films per packet (code 150 LF-2) Single Coated (S) Film, Type 551: An x-ray film coated with emulsion on one side only. Ample speed and high contrast insure excellent diagnostic detail. Co n t a in e r s : 25 packets perbox, 1 film per packet (code 25 S-l) 25 packets perbox, 2 films per packet (code 25 S-2) 150 packets perbox, 1 film per packet (code 150 S-l) 150 packets perbox, 2 films per packet (code 150 S-2) No. 3 Bitewing Film, Type 557: An x-ray film coated with emulsion on both sides having the same speed as Type 550. For use in recording on one film the coronal two-thirds of both the maxillary and mandibular teeth. Co n t a in e r s : 25 packets per box, 1 film per packet. X-RAY FILM PROCESSING CHEMICALS Concentrated Chemicals: Liquid concentrated chem icals for processing x-ray films. Developer, replenisher and fixer are each supplied in 1- and 5-qt. bottles to make, respectively, 1 and 5 gal. of solution. Concentrated Dental Chemicals: Liquid concentrated chemicals for processing dental x-ray films. Developer and fixer are supplied in 24-oz. bottles to make 1 gal. of working solution. Developer and fixer are packaged in mailing unit called Twinpack. Powdered Chemicals: "Xtra-Fast" developer and re plenisher, and single powder fixer for processing x-ray films. Supplied in package sizes to mix 1, 5, 20 and 100 gal. of solution. "PATTERSON" INTENSIFYING SCREENS Hi-Speed: A fast, stainless screen reproducing definition closely comparable to that of Par Speed, for general medical radiography where extra speed is essential; also excellent for low-powered and portable x-ray units. Par Speed: Standard speed, stainless screen for all general medical radiography. Lightning Special: A very fast, special purpose screen having highest speed throughout medical kilovoltage range. For use where speed is primary requirement. Detail: A special purpose screen designed to reproduce the finest detail possible in screen radiography. Multi-Section Screen Book: A book of seven matched pairs of intensifying screens of different speeds for multi section radiography. No. 245 I ndustrial: For high speed industrial radiography. No. 353 Industrial: Same as No, 245 but more flexible to permit bending in special applications. "PATTERSON" FLUOROSCOPIC SCREENS Type CB-2: Unique plastic screen for medical and indus trial fluoroscopy. Supplied in a wide range of standard and special sizes. Has cleanable surface. DIFFRACTION FILTERS For obtaining monochromatic x-radiation in diffraction analysis. SCREENS FOR MINIATURE RADIOGRAPHY Type D: Blue fluorescing. Not suited for regular fluoros copy. Used with special blue sensitive film. Supplied with or without cleanable surface. Type E-2: Same spectral emission as Type CB-2 for use with special green sensitive film. Cleanable surface. 30 to 35% more brilliant than Type CB-2. INDUSTRIAL PRODUCTS INDUSTRIAL AND GRAPHIC ARTS FILMS "Cronar" Clear Film: A clear polyester film for graphic arts. Available in three types: P-41--.004 in. thick, sub-coated on one side. Supplied in rolls only. P-42--.004 in. thick, sub-coated on two sides. Supplied in standard sheet sizes. P-72--.007 in. thick, sub-coated on two sides. Supplied in standard sheet sizes. r DUP210010698 PHOTO PRODUCTS DEPARTMENT INDUSTRIAL PRODUCTS "Cronar" Ortho A Litho Film: A high contrast, ortho chromatic litho emulsion coated on .004 in. and .007 in. polyester film base with a nonhalation backing. This film is quick drying, lies flat, etches easily and has wide exposure latitude with high resolving power. Sheet sizes up to and including 24 x 28 in. are packed in boxes containing 50 sheets. Larger sizes are packed in boxes containing 25 sheets. It is also available in all standard roll sizes packed in special roll film dispenser boxes. 'vruridi ran il u iiu rum A iugli contrast pancmomstic litho emulsion on .004 in. polyester film base, especially formulated for color separation work in photolithography and the graphic arts. It has a nonhalation backing and is available in all standard sizes. "Cronar" Masking Film: A fast blue sensitive, medium contrast emulsion on .004 in. polyester film base. Retouchable surface. For use in color separation masking, contact copying and negative duplicating. "Cronar" Pan Masking Film: A fast panchromatic, medium contrast photographic emulsion on .004 in. poly ester film base. Retouchable surface. Designed particularly for color separation masking and duplicating. "Cronar" Reflection Color Separation Negative Film: A moderately high contrast, continuous tone panchromatic film on ,007 in. polyester base. Retouchable surface. For making separation negatives from reflection copy. "Cronar" Transparency Color Separation Negative Film: A medium contrast panchromatic film on .007 in. polyester base. Retouchable surface. For making separation negatives from color transparencies. Lino-Flex 1 Photorecording Film: A blue sensitive emulsion on .004 in. "Cronar" polyester photographic film base for use in oscillographic recording equipment. Rotofilm: A high contrast orthochromatic emulsion used for making etch resists in the gravure industry. It is coated on a clear safety base with nonhalation backing. The base can be later stripped from the emulsion after laydown on plates or cylinders. Screen Process Film: A camera speed orthochromatic emulsion on a stable supporting base from which it is stripped to become the actual stencil for silk screen print ing. Film may be exposed in a copy camera, in an enlarger or by contact. Supplied in 25-sheet and 10-sheet packages in several standard sizes. Also available in rolls. Developing Powder A and Activator B are supplied singly or in 1-gal. and 5-gal. combination units. ENGINEERING REPRODUCTION FILMS DuPont "Cronaflex" engineering reproduction films are coated on "Cronar" polyester photographic film base. They are extremely durable, flexible, and have a high degree of dimensional stability. "Cronaflex" films handle easily in processing and dry quickly. They lie flat after processing and the special matte surfaces permit sharp, clean pen and pencil lines which will not smear or smudge, yet can be erased easily and cleanly. Three types of "Cronaflex" films are available: "Cronaflex" Contact Film: A slow speed photographic film on .004 in. and .007 in. "Cronar", for making contact reproductions. "Cronaflex" Direct Positive Film: A photographic emulsion on .004 in. and .007 in. "Cronar", which will produce positive prints directly from original copy without the need for making intermediate negatives. "Cronaflex" Projection Film: A fast projection speed, orthochromatic film on .004 in. and .007 in. "Cronar". INDUSTRIAL AND GRAPHIC ARTS PAPERS Micro-Writ: A fast orthochromatic projection paper with high contrast. Especially designed to make prints from microfilm negatives. Supplied in two types: B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte "Litho" T Photographic Paper: A transparent water proof stock, nonhalation backed, with a high contrast orthochromatic projection emulsion. It is an economical material for line reproduction work. "Photo-Writ" Photocopy Paper: A paper producing deep, rich blacks and crisp, clean whites with high contrast for photocopy work. Furnished in rolls spooled to fit standard photocopy machines, "Photo-Writ" is available in four types: A - Thin, Semi-Matte B - Standard Weight, Semi-Matte K - Standard Weight, Semi-Gloss W- Extra Thin, Semi-Matte Lino-Writ 1 Photorecordmg Paper: A photographic paper for general oscillograph recording. Spooled in sizes to fit all standard recording oscillographs. Supplied in types: B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte Lino-Writ 2 Photorecording Paper: A moderately high speed orthochromatic photographic paper for use in oscillo graphic recording over a wide range of exposures at low, normal and medium frequencies. Types: B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte Lino-Writ 3 Photorecording Paper: An orthochromatic paper for oscillographic recording at high writing speeds. Spooled to fit all standard recor ding oscillographs. Supplied in types: B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte Lino-Writ 4 Photorecording Paper: Fastest, thinnest, whitest of all photorecording papers. Spooled in standard sizes. Ultra thin, all rag base. - Seismo-Writ Recording Paper: High contrast and wide latitude with rapid developing and fixing characteristics make this photographic paper suitable for use with field recording machines employed in oil exploration work. Available in sizes to fit all standard seismic recorders. Supplied in types: B - Standard Weight, Semi-Matte W- Extra Thin, Semi-Matte 67 DUP210010699 PHOTO PRODUCTS DEPARTMENT TRADE PRODUCTS SPECIAL PRODUCTS "DH" Dehydrated Photographic Emulsion:Projection speed emulsion supplied in dry form for mixture with water at the point of use. It is designed particularly for photo lofting where large areas which may be sensitized only on location of use. May be used on such surfaces as metal and wood. TESTED CHEMICAL PREPARATIONS Prepared developers and fixers for use with industrial photographic products are also available. intermediate colored optical plastic filters are available for easy use. "Varigam" is available in nine surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. R - White Glossy S.W. T - White Glossy D.W. Y - Natural White Silk Texture D.W. TRADE PRODUCTS SHEET FILMS "Cronar" Commercial: A fine grain blue sensitive photographic film for general copy and commercial work. It is comparatively slow in speed, clear, of brilliant grada tion, and can be handled under bright red safelight. "Cronar" Arrow Pan: A high speed film with high red sensitivity which gives greatest speed advantage in incan descent light and excellent color correction by daylight and by daylight fluorescent lighting. "Cronar" Fine Grain Pan: A film of approximately half the speed of X-F Pan film, with similar color sensitivity. Designed especially for work requiring a high degree of enlargement. "Cronar" High Speed Pan: Combines high speed with balanced color sensitivity. Suitable for all high speed portrait, commercial and press work, but particularly adaptable for electronic flash lighting. "Cronar" X-F Pan: A general purpose film possessing me dium speed and correctly balanced sensitivity to all colors. High Speed "Varigam" Variable Contrast Photo graphic Paper: Designed especially for the professional photographer, this paper combines the advantages of com plete contrast control with exceptionally high projection speed, approximately twice that of regular "Varigam". High Speed "Varigam" is available in seven single and double weight surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. "Varilour" Variable Contrast Photographic Paper: A fast projection paper designed for mass production use. The contrast of "Varilour" can be raised or lowered to produce prints of uniform high quality from negatives which vary widely in contrast. This paper will produce warm black prints and will tone well in conventional direct polysulfide toners as well as in bleach and redevel opment toners. Surfaces available are: DL - Velvet Grain Natural White Luster D.W. "Cronar" Press: Extremely fast film designed for press photography. Wide exposure and development latitude for optimum response under difficult lighting conditions. R - White Glossy S.W. T - White Glossy D.W. Y - Natural White Silk Texture D.W. All sheet films are coated on nonhalation safety film base. DuPont 16-D Film Developer and 16-DR Replenisher are "Velour Black" Photographic Projection Paper: An recommended for processing of all portrait films. These are enlarging paper noted for high speed in exposure and re available in packaged form. markable fidelity to negative scale as well as simplicity in handling. "Velour Black" is made in four degrees of con PHOTOGRAPHIC PAPERS trast for all uses in portrait, commercial, industrial and illustrative photography as well as photofinishing. It is Black and White Proof Paper: A developing-out photo furnished in the following surfaces: graphic paper with full projection speed supplied on a A - White Semi-Matte S.W. Grades 1, 2, 3, 4 white rough luster medium weight stock which minimizes retouching, scratches and grain. Widely used for making photo murals as well as portrait proofs, it is available in contrast grades 2 and 3. AL - White Semi-Matte Document W. Grades 2, 3 B - White Semi-Matte D.W. Grades 1,2,3 BT - White Semi-Gloss D.W. Grades 2, 3 DL - Velvet Grain Natural White Luster D.W. Grades "Varigam" Variable Contrast Photographic Paper: 1, 2, 3, 4 Providing in one emulsion complete contrast control, DS - Velvet Grain Natural White High Luster D.W. "Varigam" has projection speed but may easily be adapted to contact printing. Exposure to blue light renders a print of hard gradation and exposure to yellow light, a print of Grades 2, 3 R - White Glossy S.W. Grades 1, 2, 3, 4 soft gradation. A full range of contrast may be obtained by T - White Glossy D.W. Grades 1, 2, 3, 4 I changing the color of the printing light. Blue, yellow and Y -Natural White Silk Texture D.W. Grades 1, 2, 3 68 DUP210010700 PHOTO PRODUCTS DEPARTMENT TRADE PRODUCTS Warmtone Photographic Projection Paper: An en larging paper which yields images of a warm brown color. Although designed for projection prints, it is adapted easily to contact printing by reducing the intensity of the printing light. Available in five surfaces, double weight only. DDL - Natural White Rough Luster D.W. DL - Velvet Grain Natural White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. Y - Natural White Silk T~).W. ZL - Artweave, Natural White Rough Cloth Texture D.W. Standard formulas for projection papers are DuPont S3-D and 55-D Developers obtainable in ready-to-use form. DuPont 18-F Universal Fixer is recommended. SPECIAL PRODUCTS "Adlux" Photographic Film for Transparencies: A transparent safety base film coated on both sides with "Velour Black" photographic projection paper emulsion in which a diffusing medium has been incorporated. Used in making prints for viewing by transmitted light. Plastic Filters for Use with "Varigam" and "Varllour" Variable Contrast Photographic Papers: Mounted plastic filters, supplied in one size only, consist of a 2 34 in. square black plastic frame with a numbered tab and a 2}/% in. circular optical plastic filter aperture. Sets of five and ten filters are available, packaged in a red plastic box. A black, molded plastic filter holder which attaches securely to enlarger lens barrel and a simplified instruction form which contains a filter selection chart are included with the Basic (S-A) and Complete (10-C) sets. Individual mounted filters and unmounted sheets of filter material are also supplied on special order. S-55X Safelight: An orange-brown color safelight which is satisfactory for all sensitized papers, both enlarging and contact including "Varigam". It combines maximum safety from light fog with maximum eye comfort. Prints viewed by this light during processing show a quality comparable to that under white light inspection. CCTm fkUFMIAAl BDETDADATRAMC Chemical preparations include developers and fixers for papers and films and "B-B" Developer Additive for blueblack tones and for extending the life of developers. These are available in easy-to-use packages. LUMINESCENT CHEMICAL PRODUCTS FLUORESCENT AND PHOSPHORESCENT CHEMICALS Luminescent Chemicals (Phosphors) are available for: AFo c u s in g Pl a t e s f o r Ul t r a v io l e t Mic r o s c o p y : green fluorescing zinc silicate which responds to 2537 A.U. ultraviolet light, coated on glass. Sc r e e n s f o r El e c t r o n Mic r o s c o p e s Mis c e l l a n e o u s Us e s : Also prepared to supply miscel laneous phosphors to meet individual requirements. DUP210010701 I PSGSV1ENTS HEPAHTSVSEMT GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 BRANCH OFFICES: Atlanta 2, Georgia Boston (Malden 48), Massachusetts Chicago 6, Illinois Cleveland 20, Ohio Detroit 35, Michigan Houston 25, Texas Malden 48, Massachusetts New York 1, New York Pasadena, California Philadelphia 3, Pennsylvania Portland 9, Oregon San Francisco 4, California 225 Moore Street, S. E. JAckson 5-4557 359 Washington Street DAvenport 2-8080 Room 1711, 20 North Wacker Drive ANdover 3-7000 11900 Shaker Boulevard LOngacre 1-1060 13000 West Seven Mile Road UNiversity 4-1963 1105 Prudential Building, 1100 East Holcombe Boulevard JAckson 3-5533 359 Washington Street DAvenport 2-8080 1027 Empire State Building, 350 Fifth Avenue LOngacre 3-6400 22-25 Meade Building, 325 North Lake Avenue RYan 1-7431 910 Architects Building, 117 South Seventeenth Street RIttenhouse 6-2080 1238 N. W. Glisan Street CApitol 2-6012 Room 522, 111 Sutter Street EXbrook 2-4572 PLANTS: WAREHOUSES: Baltimore, Maryland Brevard, North Carolina Edge Moor, Delaware Highland, Florida Atlanta, Georgia Baltimore, Maryland Chicago, Illinois Cleveland, Ohio Dallas, Texas Detroit, Michigan Edge Moor, Delaware Houston, Texas Indianapolis, Indiana Jackson, Mississippi Kankakee, Illinois Kansas City, Missouri Lewiston, Idaho Lockland, Ohio Johnsonville, Tennessee Newark, New Jersey Newport, Delaware Trail Ridge, Florida Los Angeles, California Louisville, Kentucky Malden, Massachusetts Minneapolis, Minnesota Newark, New Jersey New Orleans, Louisiana Newport, Delaware Philadelphia, Pennsylvania Portland, Oregon St. Louis, Missouri San Francisco, California Seattle, Washington Wilmington, Delaware PRODUCTS PIGMENT COLORS Finely divided colored chemical pigments of organic and inorganic types in dry and paste forms. Many hues in each of the following broad classifications are available to the pigment consuming industries: Alkali Resistant Reds--"Naphthanil" Diazo Pigments Arylide Reds and Maroons--"Naphthanil" Diazo Pig ments "Auric" Ferric Oxide, Hydrated--Brown Basic Zinc Chromate Benzidine Yellows Chrome Oranges Chrome Yellow Pigments Copper Maroon "Dalamar" Azo Yellow "Duol" Carmine Lithol Pigment Durable Nonbleeding Reds and Maroons--Precipitated Diazo Pigments Ferric Oxide, Hydrated (See "Auric" Ferric Oxide, Hydrated--Brown) Green-Gold--Durable Organic Yellow Hansa Yellows Indanthrone Blues Lithol Rubine Red DUP210010702 PIGMENTS DEPARTMENT Molybdate Oranges "Monastral" Pigments--Phthalocyanine, Blue "Monastral" Pigments--Phthalocyanine, Green "Monastral" Pigments--Reds and Violet Organic Oranges--Diazo Pigments Phosphomolybdic Acid Colors--Basic Dye Complex Phosphotungstic Acid Colors--Basic Dye Complex Pigment Green B Pigment Scarlet Platinum-Violet--Durable Shading Pigment "Ramapo" Lightfast Blue and Green Pigments Toluidine Reds "Watchung" Red Pigments--Precipitated Diazo Pig ments Water Dispersible Colors--Organic and Inorganic Zinc Yellow--Basic Zinc Potassium Chromate Us e : As coloring or compounding materials in paints, lacquers, enamels, printing inks, leather, linoleum, floor tile, coated fabrics, plastics, rubber, fancy coated paper andwall paper. TITANIUM PIGMENTS "Ti-Pure" Titanium Dioxide is available in two types, one in which the titanium dioxide is in the rutile form (as indicated by the suffix "R") and the other in which it is in the anatase form. Rutile types of pigment show 20-40% greater tinting strength and opacity than the anatase types. "Ti-Pure" R Titanium Dioxide Rutile (Titanium Oxide)--Ti02: A fine, dry, white powder; Sp. Gr. 4.2; in dex of refraction 2.71. Available in various grades with distinctive properties. Us e: In paints, linoleum, lacquers, paper, leather, inks, rubber and plastics as a pigment. Co n t a in e r s : 50-lb. paper bags. "Ti-Pure" Titanium Dioxide Anatase (Titanium Oxide)--TiOijS A fine, dry, white powder; Sp. Gr. 3.88; index of refraction 2.53. Available in various grades with distinctive properties. Us e : Similar to "Ti-Pure" R. Co n t a in e r s : 50-lb. paper bags. "Ti-Pure" VG Titanium Dioxide (Titanium Oxide) --Ti02: A free flowing type of dry powder developed especially for use in vitreous enamels for iron and steel and the general ceramic field. "Ti-Pure" VG is not a pigment grade but a coarse particle size product falling mainly be tween 80 and 325 mesh. Co n t a in e r s : 50-lb. paper bags. "Ti-Cal" R Titanium Calcium Pigment Rutile: A fine, white powder available in various grades with dis tinctive properties; Sp. Gr. 3.25; approximate analysis is 30% TiOs and 70% CaS04. Us e : In flat paints, architec tural finishes, gloss paints and enamels. Co n t a in e r s : 50-lb. paper bags. SPECIALTY PRODUCTS Fibrous Potassium Titanate: Crystalline fibers 1 micron in diameter melting at 2500F. Useful to 2200F. Us e : High temperature thermal, acoustical and electrical insu lations; filter media. Fo r ms : Lumps, blocks and loose fibers. (Sold only through Wilmington Office.) Niobium Metal--Nb: A ductile metal possessing low thermal neutron cross-section and high melting point. Us e: Structural material in nuclear reactors and as a base for high temperature alloys. Fo r ms : Ingots and mill products of niobium and its alloys. (Sold only through Wilmington Office.) Silicon, Hyperpure--Si: Semiconductor grades and Solar Cell grade. Us e : In electronics industry for transis tors, diodes, rectifiers and solar batteries. (Sold only through Wilmington Office.) Titanium Metal--Ti: A light, strong, corrosion resistant metal. Us e : Structural metal and alloy ingredient. Fo r m: Sponge metal. (Sold only through Wilmington Office.) 71 DUP210010703 ] POLYCHEMBCALS DEPARTMENT GENERAL OFFICE: Du Pont Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 BRANCH OFFICES: Atlanta 18, Georgia 1737 Ellsworth Industrial Drive, N. W. SYcamore 4-9581 Boston 10, Massachusetts 140 Federal Street HAncock 6-1711 /--ii a r- Til .1. v^meagu *+u, lumuia u_ A Lincolnvvccd ! (Chicago Calls) INdependence3-7250;(Others) ORchard 5-1010 Denver 2, Colorado 613 Midland Savings Building, 444 Seventeenth Street KEystone 4-3433 Detroit 35, Michigan 13000 West Seven Mile Road UNiversity 4-1963 Los Angeles 58, California 2930 East 44th Street LUdlow 2-6464 New York 1, New York Empire State Building, 350 Fifth Avenue LOngacre 3-6400 Philadelphia 3, Pennsylvania 1616 Walnut Street Kingsley 6-4600 St. Louis 1, Missouri 818 Olive Street CEntral 1-8532 San Francisco 4, California 111 Sutter Street ! EXbrook 2-6230 i; I PLANTS: Belle (Charleston), West Virginia Parkersburg, West Virginia Orange, Texas Victoria, Texas PRODUCTS CHEMICALS SALES DIVISION Adipic Acid--(CHs^COOHJa: White crystalline solid; Commercial Methanol Anti-Freeze (C.M.A.): A meth i I| M. P. 152C.; soluble in alcohol; slightly soluble in water. Us e: In manufacture of plasticizers and polyester resins; anol base product with chemical rust and corrosion inhibitor. Has good heat transfer properties. Recommended in organic synthesis. Co n t a in e r s : 50-ib. paper bags. for protection to --30F. in vehicles with standard (160F.) Ammonia--Anhydrous--NH3: Supplied as a liquid opening thermostats. Co n t a in e r s : 55-gal. drums. under pressure; gas at ordinary temperature and pressure; Cyclohexanol: (See "Hexalin" Cyclohexanol, Page 73.) C colorless; pungent odor; B. P. (one atm.) --33.4C.; F. P. --77.7C.; 99.99% NHS min. Us e: Manufacture of nitric acid and other chemicals; rubber vulcanization; as a source Cyclohexanone: (See "Hytrol" O Cyclohexanone, Page 73.) of hydrogen and nitrogen in metal processing; in manu facture of pharmaceuticals; oil refining; treatment of water. Decanol: (See "Lorol" 22 n-Decanol, Page 73.) DiglycolicAcid--0(CH2C00H)2: White crystalline solid; Ammonia--Aqua--NH.iOH: (See Ammoniacal Liquor, M. P. (pure) 148C.; soluble in water and alcohol; pH of below.) 10% aqueous solution 1.4. Forms a nonhygroscopic mono hydrate at relative humidities above 72% at 25C. Us e : Ammoniacal Liquor (Ammonium Hydroxide) -- In manufacture of resins and plasticizers; in organic NH.OH: Water-white liquid; 26 Be. at 60F. containing synthesis; sequestering agent. Co n t ain e r s : 50-lb. paper i! 29.4% NH, by weight. Sp. Gr. 0.8974 at 60F. (15.6C.). Us e: Manufacture of ammonium salts and other chemicals; hags. in household ammonia and other cleaning agents; as a Dimethyl Sulfate (Methyl Sulfate)--(CH3)2SOt:Water- neutralizing agent; for pH control; in water purification; white liquid; F. P. --31.8C.; B. P. 188.8C.; Sp. Gr. !: ingredient in ink and photographic developers; hydrolysis (15.6715.6C.) 1.332. Us e : As a methylating agent in of gelatin and glue. Co n t a in e r s : 7,000-, 8,000- and making intermediates, dyes and synthetic drugs. Co n 10,000-gal. tank cars. t a in e r s : 55-gal. drums, 8,000-gal. tank cars. Ammonium Sulfate--(NH^sSO,!: Light tan crystalline solid; guaranteed analysis not less than 20.5% nitrogen. Us e : In manufacture of mixed fertilizers. Co n t a in e r s : Shipments in car lots in bulk only from Belle, West Virginia. Anti-Freeze: (See "Zerone" Anti-Rust Anti-Freeze; "Zerex" Anti-Rust Anti-Freeze, Page 74.) Calcium Propionate: (See "Mycoban" Calcium Pro pionate, Page 73.) Cetyi Alcohol; (See "Lorol" 24 Cetyl Alcohol, Page 73.) Fatty Alcohols: (See "Lorol" Fatty Alcohols, Page 73.) Fertilizer Compound: (See "NuGreen" Fertilizer Com pound, Page 73, "NuGreen" L-B Fertilizer Compound, Page 74, "Uramite" Fertilizer Compound, Page 74, "Uramite" M Fertilizer Compound, Page 74.) Formamide--Technical--HCONH2: Colorless, viscous hygroscopic liquid; B. P. 210C.; F. P. 2.5C. Us e : Ex ceptionally good solvent; softener (e.g., in paper, glues); chemical intermediate. Co n t a in e r s : 55-gal. drums, 8,000gal. tank cars. 72 DUP210010704 POLYCHEMICALS DEPARTMENT CHEMICALS SALES DIVISION Glycolic Acid: (See Hydroxyacetic Acid, below.) "Hexaiin" Cyclohexanol--CeHnOH: Colorless liquid; F. P. (pure) 25.2C. (usually shipped with 2.25% methanol as anti-freeze); B. P. (pure) 161.1C. Us e : Solvent in lacquers, shellacs and varnishes; homogenizer and stabilizer in soap, drycleaning and textile industries; intermediate for chemicals, plasticizers, lubricating oil additives. CON TAINERS: 55-gal. drums, 8,000- and 10,000-gal. tank cars. Hydroxyacetic Acid (Glycolic Acid)--Technical Grade 70%--HQCHnCOQH: Light straw colored liquid con taining approximately 70% hydroxyacetic acid with traces of other organic acids; F. P. 10C. Us e : In dyeing and tan ning of leather; dyeing of textiles; manufacture of cleaning compounds; adhesives; bright-dipping of copper, electro polishing of stainless steel, and electroplating. Co n t ain e r s : 55-gal. lined steel drums, 6,000- and 10,000-gal. tank cars. "Hytrol" O Cyclohexanone--CeHioO: Colorless liquid; B. P. 156.7C.; F. P. --47C. Us e: As a solvent in the textile, paint and varnish industries, especially for vinyls; as a chemical intermediate. Co n t ain e r s : 55-gal. drums, 8,000- and 10,000-gal. tank cars. "Itnpedex" Mold Inhibitor: White powder containing sodium propionate. Us e : Inhibits heat and mold growth in feeds. Co n t a in e r s : 250-lb. fiber drums. Lauryl Alcohol: (5ee `Lorol" 5 and 7 Technical Lauryl Alcohol, this page.) "Loroi" Fatty Alcohols: A group of straight chain (normal) even-numbered-carbon alcohols ranging from C-8 (octyl) to C-18 (stearyl). "Lorol" 5 Technical Lauryl Alcohol: Colorless viscous liquid; Sp. Gr. (25/25C.) 0.832-0.836; mixture of straight chain (normal) even-numbered-carbon alcohols (C-10 to C-18) with lauryl alcohol predominating. Us e: Intermedi ate in manufacture of detergents, lubricating oil additives, quaternary ammonium compounds, mercaptans and textile finishing agents. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 7 Technical Lauryl Alcohol: Colorless liquid; Sp. Gr. (25/25C.) 0.832-0.836. Similar to "Lorol" 5 except that it contains a higher percentage of stearyl alcohol. Us e: Intermediate in manufacture of lubricating oil additives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 9 Technical Lauryl Alcohol: Colorless liquid containing about 70% lauryl alcohol. Sp. Gr. (250/25C.) 0.832-0.835. Us e : Manufacture of lauryl chloride and its derivatives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 11 Technical Lauryl Alcohol: Colorless liquid containing about 80% lauryl and 20% myristyl alcohol. Sp. Gr. (25/25C.) 0.832-0.836. Us e: Manufacture of lauryl chloride and its derivatives. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 20 n-OctanoI --CH3(CH2)GCH2OH: Colorless liquid. B. P. (pure) 195C. Sp. Gr. (25/25C.) 0.823-0.826. Essentially normal octyl alcohol. Us e: Antifoam agent, intermediate in manufacture of plasticizers, lubricating oil additives and perfumes. Co n t a in e r s : 55-gal. drums, 8.000-gal. tank cars. "Lorol" 22 n-DecanoI--CH3(CH3)3CHs OH: Colorless liquid. B. P. (pure) 231C. Sp. Gr. (25/25C.) 0.828-0.832. Essentially normal decyl alcohol. Us e : Antifoam agent, in termediate ir. manufacture of quaternary ammonium com pounds, lubricating oil additives, perfumes and plasticizers. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. "Lorol" 24 Cetyl Alcohol--National Formulary Grade --CH3(CH2)i4CH20H: White flakes; M. P. (pure) 49.6C. Cetyl alcohol meeting the requirements of the National Formulary VIII. Us e: Emulsifying and softening agent in cosmetics, salves and ointments. Co n t a in e r s : 140-lb. fiber containers. "Lorol" 28 Stearyl Alcohol--Industrial Grade -- CH3(CH2)i6CH20H: White flakes; M. P. (pure) 58.0C. Technical grade stearyl alcohol. Us e: Mold lubricant, intermediate in manufacture of lubricating oil additives, quaternary ammonium compounds and textile finishing agents. Co n t a in e r s : 50-lb. paper bags. "Lorol" 28 Stearyl Alcohol -- U. S. P. Grade -- CH3(CHa)iaCH20H: White flakes. M. P. (pure) 58.0C. Stearyl alcohol meeting requirements of U. S. P. Us e : In gredient in lipsticks, cosmetic creams, lotions, ointments and salves. Co n t a in e r s : 50-lb. fiber containers. Methanol--CH3OH: Colorless flammable liquid; B. P. 64.7C.; F. P. --97C.; Sp. Gr. (20/4C.) 0.7913. Us e: Ingredient of automotive and other anti-freezes; in manu facture of formaldehyde; in manufacture of many methyl esters (e.g., dimethyl phthalate, methyl chloride); injection fluid for increasing power and octane rating of aviation gasoline; as a constituent of many solvents for varied pur poses. Co n t a in e r s : 55-gal. drums; 6,000-, 8,000- and 10.000-gal. tank cars. Methyl Formate--Technical (97%)--HCOOCH3: Col orless, mobile, volatile liquid; B. P. 31.8C. Us e: As an ingredient in fumigants; as a solvent; in manufacture of formates and organic chemicals. Co n t a in e r s : 55-gal. drums; 8,000- and 10,000-gal. tank cars. Mold and Rope Inhibitors: (See "Mycoban" Calcium Propionate and "Mycoban" Sodium Propionate, below.) "Mycoban" Calcium Propionate--Ca(CH3CHsCOO)2: White powder. Us e : Inhibitor of mold and certain other microorganisms in baked goods, pasteurized process and blended cheeses and cheese foods packaged as slices and cuts for consumer distribution, and tobaccos. Co n t a in e r s : 250-lb. drums. "Mycoban" Sodium Propionate--CH3CH2COONa: White powder. Us e: Inhibitor of mold and certain other microorganisms in baked goods, pasteurized process and blended cheeses and cheese foods packaged as slices and cuts for consumer distribution, and tobaccos. Co n t a in e r s : 60-lb. cartons (six 10-lb. packages), 250-lb. fiber drums. "NuGreen" Fertilizer Compound: Tiny round green pellets, much like buckshot in size and shape, specially 73 DUP210010705 POLYCHEMICALS DEPARTMENT treated to maintain free-flowing, non-caking characteristics; contains 45% urea-nitrogen. Us e : As a nitrogen fertilizer for spray application to the foliage of plants or for soil application either direct or in mixed fertilizers. Co n t a in e r s : 80-lb. paper bags. "NuGreen" L-B Fertilizer Compound: Light tan granular solid specially treated to maintain relatively free-flowing, non-caking characteristics; contains 45% urea-nitrogen, less than 0.2% biuret. Us e : As a low-biuret nitrogen fertilizer for spray application to citrus crops. Co n t a in e r s : 80-lb. paper bags. Octanol: (See "Lorol" 20 n-Octyl alcohol, Page 73.) Propionic Acid--CH3CH2COOH: Colorless liquid; B. P. 141.4C.; F. P. -- 20.8C.; Sp. Gr. (20/4C.) 0.992. Us e : As esterifying agent in manufacture of cellulose propionate and mixed esters; in manufacture of ester solvents, fruit flavors and perfume bases. Co n t a in e r s : 55-gal. drums, 8,000-gal. tank cars. Sodium Propionate: (See "Mycoban" Sodium Propi onate or "Impedex" Mold Inhibitor, Page 73.) Sodium Propionate, N. F,,: White powder complying with National Formulary, 10th Edition Specifications. Us e: Prevention and treatment of ketosis in dairy cattle. Co n t a in e r s : 150-lb. fiber drums. Stearyl Alcohol: (See "Lorol" 28 Stearyl Alcohol, Page 73.) "Two-Sixty-Two" Feed Compound: Free-flowing, non caking granules; contains 42% urea-nitrogen equivalent to 262% crude protein (nitrogen x 6.25). Us e : As an in gredient of feeds for ruminants (dairy cows, beef cattle, sheep) at a rate of not more than one-third of the total equivalent protein in the mixture. Recommended for use by commercial feed manufacturers only. Co n t a in e r s : 80-lb. paper bags. "Uramite" Fertilizer Compound: Odorless yellow granular solid containing nitrogen principally in the form of methylene ureas; remains free flowing under all con ditions; contains 38% nitrogen, only slightly soluble in water. Us e : As a direct application fertilizer for turf grasses and ornamental plants, or other crops requiring a long period of a continuous and uniform supply of nitrogen. Co n t a in e r s : 25- and 50-lb. paper bags. "Uramite" M Fertilizer Compound: Gray-white gran ular solid containing nitrogen principally in the form of methylene ureas; remains free flowing under all conditions; contains 38% nitrogen, only slightly soluble in water. Us e: As a high-quality, long-feeding nitrogen source in specialty mixed fertilizers. Co n t a in e r s : 80-lb. paper bags. CHEMICALS SALES DIVISION "Uramon" Ammonia Liquors: Solutions of crude urea and ammonium sulfate in aqueous ammonia. Nitrogen Content Vapor Pressure (lb./sq. in., 70F.) UAL-A..................... UAL-B..................... UAL-C..................... 45.5% 45.5% 37.0% 32 22 0 UAL-37..................... 37.1% 2 UAL-S..................... 42.5% 20 UAL-37 also supplies water-insoluble organic nitrogen. Us e : In manufacture of fertilizers. Co n t a in e r s : Tank cars. Urea, Crystal (Carbamide)--(NH2)2CO: White crystals, M. P. 132.7C.; Sp. Gr. (solid) 1.335. Us e : Manufacture of urea-formaldehyde resins for adhesives, protective fin ishes, molding powders, and treatment of paper and textiles; for treating wood and textiles; solubilizing agent for starches and proteins in adhesives and paper coatings; softening agent for paper and cellulose; intermediate in the manufacture of chemicals, dyes and pharmaceuticals; in gredient in fire-retardant paints; ammoniated dentifrices; in the preparation of skin creams, lotions and deodorants; stabilizer in explosives; blowing agent for porous articles (foamed latex, sponges); dewaxing of oils; medicinal pur poses. Co n t ain e r s : 100-lb. paper bags. Urea, Shotted (Carbamide)--(NH2)2CO: Small round white pellets which remain relatively free flowing and noncaking. Us e : Same as Crystal Urea (above). Co n t a in e r s : 100-lb. paper bags. ' "Zerex" Anti-Rust Anti-Freeze: An ethylene glycolbase product made to a special DuPont formula; contains inhibitors to protect the automotive cooling system chem ically against rust and corrosion; nonevaporating; non foaming. The boiling point of "Zerex" solutions is always higher than that of water. Specifically recommended for very low freezing point protection and high engine temper ature operation. Co n t a in e r s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans per carton); 54-gal. drums. "Zerone" Anti-Rust Anti-Freeze: A methanol-base product designed to give effective and economical coldweather protection (down to --30F.) to automobile cooling systems. "Zerone" is so effective that about 25% less is required to prevent freezing at a given temperature than is required of products based on ethyl alcohol or ethylene glycol. Contains a chemical inhibitor. Specifically recom mended for use with normal-operating thermostats (below 160F.). Co n t a in e r s : Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans per carton); 54-gal. drums. i 74 DUP210010706 PLASTICS SALES DIVISION POLYCHEMICALS DEPARTMENT PLASTICS SALES DIVISION PRODUCTS Acrylic Resin: (See "Lucite" Acrylic Resin, this page.) "Alathon" Polyethylene Resin: Translucent white gran ular material. In the finished form it is flexible, extremely tough even at very low temperatures, unaffected by moisture and aging, resistant to most chemicals, solvents and greases. Among the lightest of all plastic materials, it has excellent dielectric properties and is tasteless, odorless and nontoxic. As a film it has very low water permeability but is more permeable to carbon dioxide, oxygen and other gases. Many compositions are available. Base resins differ in density, melt index, and molecular weight distribution. In addition, there are additives to improve surface proper ties, appearance or weatherability. Resins offered for elec trical applications contain antioxidant to maintain the excellent low power factor and dielectric constant during processing. Us es : Extruded into film and coatings for pack aging, building construction, agricultural mulching, and lining of irrigation ditches and ponds; extruded onto wire and cable for insulation and jacketing and into pipe for conveying cold water, corrosive chemicals, and food prod ucts; injection molded into thousands of objects ranging from ink cartridges for ballpoint pens to garbage cans of 23-gal. capacity; blow molded into squeeze bottles, jars, and hollow shapes; thermoformed from heavy sheet into con tainers, trays, housings, etc. Co n t a in e r s ; 50-lb. paper bags, 1,500-lb. nonreturnable corrugated containers, 10,000lb. returnable collapsible rubber containers, 2,000-lb. unit loads (50-lb. bags). "Alathon'' Linear Polyethylene Resin--(Less highly branched than "Alathon" polyethylene resin): Trans lucent white granular material. The linear molecular structure results in increased stiffness, heat resistance, and impermeability with only a slight sacrifice in toughness. Several base resins are available, and additives are in corporated where necessary for resistance to thermal em brittlement and weathering. Us es : Extruded into film of greater stiffness, pipe of greater strength, and wire and cable insulation of greater abrasion and heat resistance; molded into a limitless variety of housewares, toys, mechan ical components, sterilizable hospital ware; blow molded into unbreakable bottles; thermoformed into containers, trays, housings, etc. Co n t ain e r s ; 50-lb. paper bags, 10,000-lb. returnable collapsible rubber containers, 2,000lb. emit loads (50-lb. bags). Brushes: (See Plastics Products Division, Page 77.) "Butacite" Polyvinyl Butyral Resin (Sheeting): Soft pliable sheeting. Extremely flexible and tough over a wide range of temperatures and moisture conditions. In lami nated safety glass, it is highly resistant to heat, light and moisture, also holds broken pieces of glass together under impact. Available in colorless, gradient band tinted, and in several transparent colors. Us e : Automotive safety glass, bullet resistant glass, shatter resistant glazings for aircraft, safety shields for television; architectural applications requiring safety, glare control, or special color effects. Co n t a in e r s : 750-ft. rolls in fiber tubes, or pellets. Combs: (See Plastics Products Division, Page 77.) "Delrin" Acetal Resin--(-OCH2-)n: Thermoplastic in form of cylindrical pellets. Supplied in two basic composi tions--500 series general purpose injection molding resins and 150 series general purpose extrusion resins. Supplied in natural (white) or number of standard colors. Molded or extruded articles have remarkable combination of chemical and physical properties: High strength and stiff ness combined with toughness and resilience over wide temperature range; good dimensional stability in presence of moisture; high heat distortion temperature; excellent resistance to all types of organic solvents; excellent bearing characteristics and good abrasion resistance. Lik e l y Us es : Injection molded articles for automotive parts such as interior hardware, bushings and bearings for suspension and steering linkages, squirrel cage blowers, gears, instru ment clusters, fuel pump and carburetor parts; electrical components. Pump impellers, housings and cover plates, showerheads, cutlery handles, tumblers, pen parts, appli ance transmission gears, and combs; extruded articles and shapes include tubing (control cable sheathing), coated wire, laminated paper, sheeting, pipe and blow molded aerosol bottles. Co n t a in e r s : 50-lb. bags. "Lucite" Acrylic Resin (Methacrylate Polymers)-- [CH2C(CH3)COOR]x: A series of polymeric esters of methacrylic acid, in -which R is methyl--("Lucite" 41 acrylic resin), ethyl--("Lucite" 42), n-butyl--("Lucite" 44), isobutyl--("Lucite" 45), or 50/50 n-butyl/isobutyl-- ("Lucite" 46). Water-white, transparent, thermoplastic resins in granular form. Densities from 1.19 to 1.05; soluble in a wide variety of polar and nonpolar solvents; compatible with many plasticizers. Excellent outdoor durability; chem ically stable at elevated temperatures; resistant to water, aqueous salt solutions and moderately concentrated acids and alkalies. Us e : Ingredients in lacquers and other finishes; aerosol "snow"; coatings for fabrics and hot melt adhesive compositions; impregnants for leather; modifiers for other resins, such as vinyls. Co n t a in e r s : 25- to 250-lb. fiber drums. "Lucite" Acrylic Resin (Molding Powders): Granular solid and cube-cut (for injection molding and extrusion); in minute spherical granules (for compression molding). Available in water-white, transparent and a range of transparent, translucent and opaque colors. Molded and extruded articles have outstanding crystal transparency in clear form; excellent outdoor stability; "light-piping" and "edge-lighting" qualities; lightness of weight; shatter resistance; dimensional stability. Three grades are available for injection molding and extrusion (each with its counter part in forms suitable for compression molding): soft-, medium- and hard-flow. The hard-flow formulation is indicated wherever heat resistance is important in an acrylic part. Us e : Molded by injection or compression for auto motive parts (horn buttons, instrument dials, tail light lenses, indoor and outdoor decorative medallions, re flectors) ; combs and brush backs; lighting fixtures; pen and pencil barrels; small signs and displays; refrigerator parts 75 DUP210010707 POLYCHEMSCALS DEPARTMENT PLASTICS SALES DIVISION (door handles, freezing compartment doors, decorative "Teflon" TFE-Fluorocarbon Resin (Extrusion Pow medallions); costume jewelry; aircraft parts. Extruded for der): White powder, specially manufactured for processing lighting fixtures, large signs, glazing and decorative trim. in a modified extrusion technique involving the use of Co n t a in e r s : 250-lb. fiber drums and 1,000-lb. cartons. organic extrusion aids. Properties similar to those of ; "Teflon" molding powder. Us e : Extruded as tape, tubing, "Lucite" Acrylic Resin Dental Materials: Monomer wire insulation, and shapes, for use in chemical hose and and granular polymers used in the manufacture of dentures, tubing, gasket stock, insulation on aircraft, and electronic teeth, crowns and inlays. hookup wire, tape wrapped insulation. Co n t a in e r s : 18- and 50-lb. fiber containers. Methacrylate Monomers--CH2C(CH3)COQR (Where R is Hydrogen, Methyl, Normal Butyl or Isobutyl): Water-white, mobile, volatile liquids containing a small amount of polymerization inhibitor. Us e: Primarily in manufacture of acrylic resins and copolymers, and as chem ical intermediates. Co n t a in e r s : 5-gal. cans, 55-gal. drums, tank trucks, 8,000-gal. tank cars. "Teflon" TFE-Fluorocarbon Resin (Aqueous Disper sion): Milky white liquid consisting of minute particles of tetrafluoroethylene resin in water (60% solids), with small amount of wetting agent. Offers fundamentally the same properties as "Teflon" molding powder, with the applica tion advantages of the liquid form. Us e: Cast film for Methacrylate Polymers: [See "Lucite" Acrylic Resin (Methacrylate Polymers), Page 75.] capacitor layer insulation; coated glass fabric and laminates for electrical insulation, non-adhesive sheets, gaskets; impregnated asbestos fabric and braid for gaskets and Nylon Filaments: (See "Tynex" Nylon Filaments, this page.) packing; finishes for non-adhesive coatings; wire enamels for magnet wire; blends with other resins and fillers. CON TAINERS: 1-, 5-, and 30-gal. drums. Nylon Molding Powders: [See "Zytel" Nylon Resin (Molding Powders), this page.] Toilet Articles: (See Plastics Products Division, Page 77.) Nylon Monofilaments, Nylon Resins, Soluble: [See "Zytel" Nylon Resin (Solu ble Resin), Page 77.] Polyethylene: (See "Alathon" Polyethylene Resin, Page 75.) "Rulan" FIame-Retardant Plastic for Electrical in sulation: A white granular material specially developed for the electrical industry to meet the need for a good dielectric with flame-retardant characteristics. Does not support combustion or drip when heated above the melting point; electrical properties approach those of "Alathon" polyethylene resin. Us e : Extruded as insulation for many types of wires and cables where flame resistance is impor tant; injection molded into components for radio, television and telephone. Co n t a in e r s : 50-lb. paper bags. "Stren" Monofilament Spinning Line: A specially processed high strength, limp and low elongation mono filament for use in spin fishing. Packaged in plastic contain ers containing a single spool of 100 yards and two connected spools containing 100 yards each. Also available in bulk cardboard package containing 6 connected spools of 100 yards each. Sold only through authorized distributors. "Teflon" TFE-Fluorocarbon Resin (Molding Pow ders): White granular powder of small particle size. Un affected by all solvents and practically all chemicals and solvents; outstanding electrical properties; capable of continuous service at 500F. (260C.); good low-tempera ture toughness; unique resistance to adhesion of practically all sticky materials. Us e: Molded, extruded or fabricated from sheet or rod stock as gaskets, packing, mechanical seals, bearings; spacers for coaxial cables, inserts for coaxial connectors, tube sockets; insulation for high frequency, high temperature and high voltage wires and cables; high quality wrapping tape for insulation in motors, generators and conductors; nonadhesive surfaces for bakery rolls, sealing plates and guides on packaging machinery; candy molds. Co n t a in e r s : 5-, 25- and 220-lb. fiber containers. Toothbrushes: (See Plastics Products Division, Page 77.) "Tynex" Nylon Filaments, Tapered: Black, with an essentially uniform taper from butt to tip. Us e : Primarily in paintbrushes. Paintbrushes made of "Tynex" can be used with all paints; hold and spread paint well; are easy to clean; and outlast other brushes 3 to 5 times. Co n t a in er s : Boxes containing bundles, 25-lb. minimum. "Tynex" Nylon Filaments, Level: Natural, black and colors in a wide range of constant diameters. Supplied in paper-wrapped hanks (diameter 2", length 46)^", weight approximately 4 lb.); in cut pieces, paper-wrapped (diameter 2", lengths 1" through 46in increments of 1/16"); and in the form of multistrand ropes on spools and single-strand continuous lengths on spools (returnable metal spools are 12" in diameter and each spool holds ap proximately 5 lb. net weight of filament). "Tynex" is tough and strong; resistant to abrasion, heat, moisture, petroleum products, alkalies and dilute acids. Has excellent bend-recovery and flex-life. Us e: Filling for personal, household, maintenance, industrial brushes, and mechani cal street sweeps; filament for wigs, surgical sutures and racquet strings. Co n t a in e r s : Hanks, cut pieces and spools (5) shipped in cartons. Approximate net weight of filament per carton: 25-lb. minimum. "Zytel" Nylon Resin (Molding Powders): Solid gran ular material, cube-cut or chopped; some types available in colors. Several types of nylon are available, varying in heat resistance, solvent resistance and flexibility. In gen eral, articles molded, extruded or machined from nylon are tough over a wide range of temperatures, resistant to abrasion, form-stable at high temperatures, strong in thin sections, light in weight and resistant to chemicals and solvents; and have unusual bearing characteristics. Us e: Injection molded for automotive parts (interior lenses, light-load gears and bearings, fuse holders, insulator bush ings, pedal bushings); coil forms of many types, wireconnectors, strain-relief grommets, battery cases; mechani cal parts for textile machinery, business machines, home 76 DUP210010708 PLASTICS PRODUCTS DIVISION movie cameras, electric shavers, household appliances; tumblers, combs, brush backs; sterilizable medical items. Extruded as abrasion-resistant jacketing for electrical wires and cables and for mechanical cables. Co n t a in e r s : 25-lb. cans; certain types in 22.5-lb. cans. "Zytel" Nylon Resin (Special Extrusion Powder)? Solid granular material, cube-cut. Properties similar to molding powder of highest melting point, but with still greater toughness and much higher melt viscosity. High melt viscosity permits the extrusion of shapes to accurate dimensions. Us e: Precision-extruded shapes such as rods, POLYCHEMICALS DEPARTMENT tubing, and channels of various design; tough transparent film sheeting; coated flexible materials; blown bottles and other containers. Co n t a in e r s : 25-lb. cans. "Zytel" Nylon Resin (Soluble Resin): Cream colored cubes. Alcohol-soluble polyamides having an unusual com bination of properties, including toughness, flexibility and high elongation; excellent resistance to most solvents in cluding aliphatic and aromatic hydrocarbons, and to alka lies and oxygen-containing gases. Us e : Coatings for textiles and paper; adhesives; hydrocarbon barrier in fuel cells. Co n t a in e r s : 50-lb. paper bags. PLASTICS PRODUCTS DIVISION GENERAL OFFICE: New York 1, New York Empire State Building, 350 Fifth Avenue PLANT: Leominster, Massachusetts TELEPHONE LOngacre 3-6400 PRODUCTS Combs and Brushes; Combs and brushes of the types listed below, made of "Lucite" acrylic resin, "Zytel" nylon resin and other plastics, are available in various colors and designs, some of which are design-patented. Combs made of nylon are marked DuPont nylon. Some are sold under the trademarks "Lido", "Arlton" and "La Belle". Beautician Combs Women's Dressing Combs Purse-size Combs Purse-size Brush-Combs Purse-size Curl-Combs Purse-size Comb and Brush Sets Men's Combs Men's Pocket Combs, with or without Clips Barbers' Combs Infants' Combs and Brushes Toiletries: Hand brushes, nail brushes, soap boxes, tooth brush holders. Some soap boxes and toothbrush holders made of "Alathon" polyethylene resin. Toothbrushes: A line comprising all the well-known and accepted styles for adults and children, sold under the trademarks "Arlton", "Dentabest", "Paramount" and "Park Avenue", bristled with "Tynex" nylon. Tooth brushes made of nylon are marked AH nylon. Included are brushes with handles of "Lucite" acrylic resin and of "Zytel" nylon resin. Toothbrushes are packaged in trans parent plastic utility containers and in boxes wrapped in cellophane. Also a line of brushes for dentures. 77 DUP210010709 RIISMQT@N ARMS COiVIPAWY, SPaC, (Stock owned: common 60.17%; preferred 59.55%) GENERAL OFFICE: Bridgeport 2, Connecticut TELEPHONE EDison 3-1112 BRANCH OFFICES: Berkeley 2, California Boston 16, Massachusetts Chicago 3, Illinois Cleveland 14, Ohio Dallas 1, Texas Greensboro, North Carolina Jacksonville 7, Florida Memphis 3, Tennessee Minneapolis 3, Minnesota New York 1, New York Pittsburgh 22, Pennsylvania St. Louis 1, Missouri Salt Lake City 11, Utah 2735 San Pablo Avenue 665 Boylston Street 7 South Dearborn Street 1413 Union Commerce Building 1241 National Building 111 Jefferson Building 1603 Prudential Building, 841 Miami Road 1701 Sterick Building 614 Plymouth Building 1009 Empire State Building, 350 Fifth Avenue 2001 First National Bank Building 1810 Arcade Building 909 Walker Bank Building THornwall 8-5514 Commonwealth 6-0856 STate 2-7781 PRospect 1-7804 Riverside 2-6908, 2-6787 BRoadway 2-6879 FLanders 9-4252 JAckson 6-5326 FEderal 3-5800 LOngacre 3-6431 GRant 1-3076 MAin 1-8622 ELgin 5-8686 PLANTS: Bridgeport, Connecticut Findlay, Ohio Ilion, New York PRODUCTS REMINGTON SHOTGUNS "Sportsman" 58 Shotgun--Autoloading: 3-shot; 12, 16, 20 gauges. "Power-Matic" gas-operated shotgun. Non recoiling barrel. Us e: For skeet, trap, upland game and water-fowl shooting. Model 11-48 Autoloading Shotgun: 5-shot; made in 12, 16 and 20 gauges (4-shot in 28 and 410 gauges). 3-shot plug supplied without cost. Us e: For upland game and water fowl shooting; small upland game and skeet for 28 gauge and 410 gauge. "Sportsman" 48 Shotgun--Autoloading: 3-shot; made in 12, 16 and 20 gauges. Us e: For skeet, upland game and waterfowl shooting. "Wingmaster" Model 870 Shotgun--Pump Action: 5-shot; 12, 16 and 20 gauges; takedown; hammerless; solid breech. 3-shot "Van-Weight" metal plug in 12 gauge only; 3-shot wooden plug furnished in all gauges. Us e : For skeet, trap, upland game and waterfowl shooting. REMINGTON RIFLES Model 721 Bolt Action Big Game Rifle: Made in 30-06 Springfield, 300 H & H Magnum, and 270 Win. calibers; 5-shot capacity, Us e: For medium and big game hunting. Model 722 Bolt Action Big Game Rifle: Made in 222 Remington (6-shot capacity), 222 Remington Magnum (6-shot capacity), 244 Remington, 257 Roberts, 300 Savage, and 308 Win. calibers; 5-shot capacity. Us e : For varmint, medium and big game hunting. 78 Model 725 Boii Action Big Game Rifle: De luxe grade high power rifle made in 280 Remington, 30-06 Springfield, and 270 Win. calibers; 5-shot capacity. Us e : For medium and big game hunting. "Woodsmaster" Model 740 Rifle--Autoloading--Big Game: "Power-Matic" gas-operated rifle. Hammerless; solid breech; 244 Remington, 280 Remington, 30-06 Spring field, and 308 Win. calibers; 5-shot capacity. Us e: For medium and big game hunting. "Gamemaster" Model 7G0 Rifle--Slide Action--Big Game: High power slide action; hammerless; solid breech; made in 222 Remington, 244 Remington, 30-06 Springfield, 270 Win., 300 Savage, 35 Remington, 280 Remington, and 257 Roberts calibers; 5-shot capacity. Us e : For medium and big game hunting. "Fieldmaster" Model 572 Rifle--22 Caliber Slide Action: Takedown; hammerless; solid breech; slide action; 23-in. barrel; chambered for short, long and long rifle cartridges, without adjustment; magazine holds 20 short, 17 long or 15 long rifle regular or higher speed cartridges. Also available in Lightweight model ("Fieldmaster" Model 572 Lightweight) with choice of Crow-Wing Black or Buckskin Tan colors. Us e: For small game hunting and informal shooting. "Speedmaster" Model 552 Autoloading 22 Caliber Rifle: Chambered for short, long and long rifle cartridges, without adjustment. Magazine holds 20 short, 17 long or 15 long rifle cartridges. Us e : For small game hunting and shooting galleries. DUP210010710 REMINGTON ARMS COMPANY, INC. "Targetmaster" Model 510 Rifle--22 Caliber Bolt Action: Single shot; chambered for short, long and long rifle cartridges, without adjustment; higher speed and regular cartridges; open or peep sights. Us e; For small game and target shooting. "Scoremostor" Model 511 Rifle--22 Caliber Bolt Action: Box magazine repeater; magazine holds six car tridges; chambered for short, long and long rifle, higher speed and regular cartridges, without adjustment; open or peep sights. Us e : For small game and target shooting. "Sportmaster" Model 512 Rifle--22 Caliber Bolt Action: Chambered for short, long and long rifle, higher speed and regular cartridges, without adjustment; auto matic ejector; bolt action repeater; tubular magazine holds 22 short, 17 long or 15 long rifle cartridges; Remington receiver peep sight, or open sights. Us e; For small game and target shooting. Model 521T 22 Caliber Bolt Action Rifle: 7-shot capacity. Especially designed for hunting and small bore target shooting. Chambered for long rifle cartridges. Target aperture on the micrometer rear sight is easily removed to give fine hunting peep sight. Adjustable front sling swivel; 1-in. sling of high quality leather; Lyman No. 57RS micrometer rear sight. Weight, about 7 lb. Us e: For small game and target shooting. "Matchmaster" Model 513T Rifle--22 Caliber Bolt Action--Target: 7-shot capacity; completely equipped with target sights, target stock, adjustable front swivel and precision sights; moderately priced. Us e: For fine target shooting. "Rangemaster" Model 40X Rifle--22 Caliber Bolt Action--Target: Heavy barrel; target stock; adjustable sling swivel; built-in bedding device; weight approximately 12 lb. with heavy barrel, 10 lb. with standard barrel. Us e: For fine target shooting. Model 550 Autoloading 22 Caliber Rifle; Chambered for short, long or long rifle cartridges, without adjustment. Magazine holds 22 short, 17 long or 15 long rifle cartridges. Us e: For small game hunting and shooting galleries. Model 552 Autoloading 22 Caliber Rifle: Chambered for short, long or long rifle cartridges, without adjustment. Magazine holds 20 short, 17 long or 15 long rifle car tridges. Us e : For small game hunting and shooting galleries. Model 514 Single Shot 22 Caliber Bolt Action Rifle: Chambered for short, long and long rifle regular and higher speed cartridges, without adjustment. Open sights. Us e: Small game and target shooting. REMINGTON AMMUNITION Shotgun Shells with "Kleanbore" Priming "Express" Shotgun Shells: Green corrugated shell with Remington Flat-Top Crimp; 10, 12, 16, 20, 28 and 410 gauges (10 and 410 gauges in roll crimp only, not corru gated). Outstanding heavy load, hard hitting, even pattern. Wetproof, long range. Loaded with progressive-burning powder. Also in standard length (2%-in.) Magnum and extra length 3- and 33^-in. shells. Us e: For maximum long range game shooting. "Express" Buckshot Loads: Green corrugated shell; 12, 16 and 20 gauges. Us e: For deer, black bear, wolf; also guard and police duty. "Express" Slugs--Rifled: Green corrugated shell; 12, 16, 20, 28 and 410 gauges (410 gauge not corrugated). In creased velocity, great striking energy, long range. Im proved bullet-type shape, external rifling and hollow base cause the slug to travel with fine accuracy. Us e: For deer, bear and other big game. "Shur Shot" Shotgun Shells: Red corrugated shell; 12, 16 and 20 gauges. High quality, smokeless powder shell with Remington Flat-Top Crimp. Us e: For medium range game shooting; minimum recoil. "Shur Shot" Scatter Loads: Red corrugated shell; 12, 16 and 20 gauges. Smokeless powder. Shot divided into cells by wads between layers to give open patterns with chokebored shotguns. Us e: For short range shooting. Target Loads: Green corrugated shell; 12, 16 and 20 gauges. Us e: For trap and skeet shooting, Remington Rim Fire 22 Caliber Cartridges with "Kleanbore" Priming "Kleanbore" is the original noncorrosive priming in the United States. It will not cause rust or corrosion in rifle or shotgun barrels. "Hi-Speed" Cartridges--22 Caliber Rim Fire: Fine accuracy, longer range, greater energy, higher velocity than standard velocity 22's. Us e : For small game and pest shooting at long ranges. "Rocket" Cartridges--22 Caliber Rim Fire--Short: Special composition bullet; high muzzle velocity. Us e : For informal shooting and medium-range small game hunting. Remington Match 22 Caliber Rim Fire Cartridges: Long rifle ammunition that employs smokeless powder and "Kleanbore" priming. Unexcelled for accuracy. Us e: For match rifle, and match pistol shooting. "Spatter-Less" Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxic; pulverizes on impact. Us e: For gallery shooting. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular speed ammunition. Us e: For hunting small game or target shooting. Remington Blank and Shot Cartridges Made in assorted rim fire and center fire calibers for rifles, revolvers and pistols. Blank cartridges used largely for athletic events. Shot cartridges used for small game, and in miniature trap and skeet shooting. "Kleanbore" priming. Remington Center Fire Rifle Cartridges Calibers for all sporting purposes. "Kleanbore" priming does not cause rust and corrosion. Special progressive burning powder gives high velocities. Powder and priming protected from excess oil by a special oilproof process. Famous for high accuracy. Us e: For medium and big game hunting and target shooting. 79 DUP210010711 REMINGTON ARMS COMPANY, INC. "Hi-Speed" Cartridges--Center Fire Rifle: Available in a wide variety of center fire calibers. Us e : For medium and big game hunting. with electrical releases and accessories. For AC operation a Remington AC adapter is supplied in addition to DC equipment. "Express" Rifle Cartridges--Center Fire: Available in a wide variety of center fire calibers. Us e: For medium and big game hunting. "Wonder" Skeet Outfit--Single Lever: Includes two "Wonder" traps, single lever skeet pull, and galvanized wire. No additional accessories necessary. Can be adapted to electric release. Remington Center Fire Rifle Cartridges with "Core-Loki" Buiieis Cartridges in big game calibers. The "Core-Lokt" bullet provides maximum expansion, minimum disintegration and unexcelled knockdown power. Us e: For hunting all North American big game. Remington Pistol and Revolver Cartridges Cartridges in all standard calibers. Protected by a special oilproof process against effects of oil used for lubrication. Will retain initial energy whether in chamber or magazine. Powerful, accurate, penetrating. Noncorrosive "Kleanbore" priming. Us e : For police, hunting and target purposes. "Targetmaster" Cartridges--Center Fire--Pistol and Revolver: Available in several center fire calibers. Dis tinguished by wad cutter bullet, except for 38 Special round nose. Us e: For pistol and revolver target shooting. "Auto Angling" Model 41 Trap: Throws perfect single and double targets at 72 different angles. Completely adjustable. Simple operation. Us e: For trapshooting. REMINGTON INDUSTRIAL TOOLS Accessory Fittings: Couplings, tension washers, eye nuts, conduit clips, discs, etc., for special fastening uses. Model 455A Remington "Power-Mate": A triggeroperated powder actuated basic unit. May be equipped with any one of four barrel kits to make up a Stud Driver for driving alloy steel studs into concrete, steel, and similar hard construction materials and for fastening other materials (wood, sheet metal, insulation, fixtures, etc.) to concrete or steel base materials. Weight: 5J'i lb. K-l "Captive-Stud" Kit: Built-in arresting buffer pre vents free flight of studs in case of over-penetration in soft construction materials. Weight: 6 lb. "Hi-Way Master" Cartridges--Center Fire--Pistol and Revolver: Available in 38 Special and 45 Automatic calibers. Distinguished by metal cased, metal penetrating bullet. Us e: Law enforcement. REMINGTON TRAPS AND TARGETS K-2 54-in. Light Duty Barrel Kit: Anchors M-in. diameter studs with 22 caliber standard Power Loads. Weight: 3M lb. K-3 34-in. Medium Duty Barrel Kit: Anchors 3'8-in. diameter studs with 22 caliber special Power Loads. Weight: 3 lb. "Blue Rock" Targets: "Easy Breakers." Clean to han dle; easy to see. They smoke on impact of shot charge. The target with chrome yellow dome and flywheel action. Us e : In all target traps which throw standard targets. K-4 34-in. Medium and Heavy Duty Barrel Kit: Anchors 3'8-in. diameter studs with 32 caliber Power Loads. Weight: 4 lb. Remington Hand Target Thrower: Light and easy to operate. Duplicates every type of wing shot by throwing targets any way desired. "The spring does the work." "Mighty-Mite" Stud Driver--Remington Model 456: A highly simplified, single shot, hammer-operated, powderactuated fastening tool. Made with }4-in. barrel in 22 caliber rim fire for driving J4-in. studs only into construc tion materials as described above. Weight 3% lb. "Expert" Trap: For camps, cottages, boat and motor trips and "quail or walk-up" installations having a multiple Special Guards for Model 455A Stud Driver: Inter trap layout. Light in weight, strong construction and port able. Low in price. changeable with standard guard. Guards conform to shape of prefabricated building materials and fittings, permit "Blue Rock" Trap: Ideal for skeet or trapshooting for driving studs in hard-to-reach places. small clubs and private estates. Throws single and double Stud Driver Power Loads--Special 22 and 32 Caliber targets for trapshooting. Shovel-type carrier. Easy to in Rim Fire: Eight graded powder charges in 22 caliber and stall and operate. Moderately priced. five in 32 caliber to control penetration of 54-in. diameter and ;5|-in. diameter fastening studs respectively in con "Blue Rock" Skeet Outfit: Includes two "Blue Rock" struction materials. For medium duty applications, %-m. traps, single lever control and same accessories as furnished studs may be used in combination with 22 caliber Power with "Wonder" Single Lever Skeet Outfit. Moderately priced. Loads. Color of wad crimped into brass case identifies powder charge. i Remington Autoloading Model 100T and 200S Trap: Studs for Construction Fastening: Special hard alloy Holds 203 targets. Connects to standard 110 volt power steel. Four general types--standard head, break-off head, supply. Easy to adjust for windage, elevation and tilt. internal thread, external thread--53 varieties for specialized Models for trap and skeet shooting. No trap boy needed. fastening uses. Stud is held in barrel by oversize paper "Power Guide" retainer disc cemented to head of stud. "Wonder" Skeet Outfit--De Luxe Electric: For DC or Maximum stud diameter is thread sizes 3ds-in.-16 AC operation--DC outfit consists of two "Wonder" traps N.C., 34-in.-20 N.C. and 10-24 N. C. SO ii DUP210010712 PETERS CARTRIDGE DIVISION REMINGTON INDUSTRIAL GUN AND SHELLS Model 400 Remington Industrial Gun: For removing clinker rings and balls which form in rotary kilns used in the manufacture of cement, refractories, lime, lightweight aggregates, lime sludge, etc. Also for removing protruding rocks, ice and other obstructions iu quarries and mines. Weight of gun and mount 176 lb. D._.:_grs;. Industrial Shells: Used in above gun. Approximately 8 gauge. Muzzle energy, 7,475 ft-lb. Muzzle velocity, 1,600 ft. per sec. Also made in Magnum. Muzzle energy, 9,000 ft-lb. Muzzle velocity, 1,700 ft. per sec. REMINGTON ARMS COMPANY, INC. REMINGTON HUMANE STUNNER AND POWER LOADS Model 411B Remington Humane Stunner: A single shot, bolt action tool for stunning animals (cattle, hogs, etc.) in meat packing houses. Contact-trigger operated. Short-travel piston and knob affixed, delivers blow of sufficient energy to render animal unconscious prior to slaughter. Also available in penetrator version, wherein knob is replaced by penetrator piston rod. Humane Stunner Power Loads: Special 22 caliber crimped shot case blank power loads. Available in light (250 ft-lb.) and medium (320 ft-lb.) strengths. Strength indicated by color dip on nose of power load case. PETERS CARTRIDGE DIVISION GENERAL OFFICE: Bridgeport 2, Connecticut BRANCH OFFICES: Berkeley 2, California Boston 16, Massachusetts Chicago 3, Illinois Cleveland 14, Ohio Dallas 1, Texas Greensboro, North Carolina Jacksonville 7, Florida Memphis 3, Tennessee Minneapolis 3, Minnesota New York 1, New York Pittsburgh 22, Pennsylvania St. Louis 1, Missouri Salt Lake City 11, Utah 2735 San Pablo Avenue 665 Boylston Street 7 South Dearborn Street 1413 Union Commerce Building 1241 National Building 111 Jefferson Building 1603 Prudential Building, 841 Miami Road 1701 Sterick Building 614 Plymouth Building 1009 Empire State Building, 350 Fifth Avenue 2001 First National Bank Building 1810 Arcade Building 909 Walker Bank Building PLANT: Bridgeport, Connecticut TELEPHONE EDison 3-1112 THornwall 8-5514 Commonwealth 6-0856 STate 2-7781 PRospect 1-7804 Riverside 2-6908, 2-6787 BRoadway 2-6879 FLanders 9-4252 JAckson 6-5326 FEderal 3-5800 LOngacre 3-6431 GRant 1-3076 MAin 1-8622 ELgin 5-8686 PRODUCTS PETERS AMMUNITION Shotgun Shells with "Rustless" Priming Peters "High Velocity" Shells--Shotgun: Blue color; Peters Flat-Top Crimp; 10, 12, 16, 20, 28 and 410 gauges (10 and 410 gauges in roll crimp only). Loaded with pro gressive-burning powder. Thoroughly waterproof. Extra speed, uniform pattern, long range power. Also in standard length (2%-in.) Magnum and extra length 3-in. shells. Us e : For maximum long range game shooting, "High Velocity" Buckshot Loads: 12, 16 and 20 gauges. Us e : For large game and police duty. "High Velocity" Slugs--Rifled: 12, 16, 20, 28 and 410 gauges. Us e : Shells loaded with rifled slugs are used principally on deer and bear in states where rifles are prohibited. "Victor" Shotgun Shells: Dark red color; 12, 16 and 20 gauges with the Peters Flat-Top Crimp. A quality shotgun shell at a popular price. Us e: For field shooting, "Victor" Spreader Loads: 12, 16 and 20 gauges. Shot is separated into cells by wads between layers of shot to secure open patterns. Us e: For thicket or close range shooting. Target Loads: Blue color; 12, 16 and 20 gauges. Us e : For skeet and trapshooting. Peters Rim Fire 22 Caliber Cartridges with "Rustless" Priming Peters Match 22 Caliber Rim Fire Cartridges: Long rifle cartridges loaded with smokeless powder to standard velocities and designed especially for superfine accuracy. Us e: Particularly recommended for rifle target shooting. "High Velocity" Cartridges--22 Caliber Rim Fire: Developed for long range and great penetrating power. Us e: For small game and pest shooting. Si DUP210010713 :/ REMINGTON ARMS COMPANY, INC. "High Velocity" Cartridges--22 Caliber Rim Fire-- Shot: Long rifle shot cartridges loaded with No. 12 shot. Us e: For small game, miniature skeet, and trapshooting. "Thunderbolt" Cartridges--22 Caliber Rim FireShort: Special composition bullet; high muzzle velocity. Us e : For informal shooting and medium-range small game hunting. <<jlf ' amHIa RoIS'i Cartr)Hcoc^Na w and Ininrny^d 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxic; pulverizes on impact. Us e: For gallery shooting. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular velocity ammunition. Us e : For hunting small game or target shooting. "'Target" Cartridges--22 Caliber Rim Fire: Standard velocity cartridges designed for fine accuracy. Us e: For rifle and pistol target shooting. Peters "Oii-Tite" Cartridges--Center Fire Rifle with "Rustless" Priming Cartridges loaded with bullets best adapted for their re spective uses and manufactured in all standard calibers. Highest velocity and positive ignition. Powder and primer protected against deterioration through oil seepage and moisture by special process. Us e: For medium and big game hunting and target shooting. PETERS CARTRIDGE DIVISION "High Velocity" Cartridges--Center Fire Rifle: Avail able in a wide variety of center fire calibers. Us e: For medium and big game hunting. Peters Center Fire Rifle Cartridges with "Inner-Belted" Bullets Made in selected big game rifle calibers. Provide maximum uniform expansion with minimum disintegration and tre mendous knockdown power. Us ei For sll I'-Tortk A.msd.csn big game. Peters "Oii-Tite" Cartridges--Pistol and Revolver with "Rustless" Priming Cartridges in all standard calibers. "Oii-Tite" for pro tection against oil in chamber or magazine. Famous for target shooting. Powerful, accurate, penetrating. Non corrosive "Rustless" priming. Us e: For police, hunting and target shooting. "Highway Patrol" Cartridges--Center Fire--Pistol and Revolver: Available in 38 Special and 45 Automatic calibers. Distinguished by metal cased, metal penetrating bullet. Us e : Law enforcement. Peters Blank Cartridges Made in rim fire and center fire calibers for rifles, revolvers and pistols. Blank cartridges used largely for athletic events, theater productions and sound effects. i | i i i i;. I ; i 82 DUP210010714 s a l v a g e : a mb r e c l a ma t io n b iv s s iq m GENERAL OFFICE: Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 PRODUCTS Buildings: All kinds for dismantlement Chemicals: Surplus Chemicals, Solvents, Acids, Pigments, Special Organic Compounds, Laboratory Reagents Construction Tools and Materials: All kinds--new and used Containers: Bags, Barrels, Bottles, Cartons, Drums, Kegs, Pails, Quicksilver Flasks--new and used Electrical Supplies: Conduit, Condulets, Fuses, Motors, Rheostats, Starters, Switches, Wire--new and used Furniture: Office and Hotel Furniture and Equipment, Typewriters and Business Machines--used Machinery and Equipment: Ail kinds--new and used Automotive (Cars and Trucks), Factory Trucks and Railroad Equipment Boilers, Engines, Turbines and Steam Power Equip ment Centrifuges, Filters and Dust Collectors Compressors (Air and Refrigeration) and Pumps Construction Equipment and Supplies (miscellaneous) Drives Drying Equipment Electrical Equipment (miscellaneous) and Trans formers Fans, Blowers, Exhausters and Ventilators Heaters, Condensers, Exchangers and Coolers Hoists, Lifts and Conveyors Instruments and Metering Equipment Machine Tools and Shop Equipment Mills, Grinders, Crushers, Mixers and Cutters motors, uear motors, Motor Reducers and M.G. Sets Office, Laboratory and Change House Equipment Safety and Fire Protection Equipment Scales Tanks, Kettles, Pressure Vessels, Stills and Columns Textile Equipment Vibrators, Shakers and Feeders Metal Scrap--Ferrous and Nonferrous: Aluminum, Brass, Bronze, Copper, Iron, Lead, Monel, Nickel, Stainless Steel, Steel, Tin, Zinc Mill Supplies: General Industrial Maintenance Materials--new and used Paper Stock and Rags: Rags, Paper and Rope Scrap Pipe, Valves and Fittings: All kinds--new and used Power Supplies: Boiler, Stoker and Allied Equipment Parts--new and used Residues and Sludges: By-Products of All Descriptions; Recovered Acids, Solvents, Salts, Lime, Cinders, Graphite, Metallic Residues Specialties: Fabrics; Bags and Cartons; Glass Containers; Spools, Bobbins, Pirns and Cones; Experimental lots and seconds of some Company products; Rubber; Plastics Stainless Steel: Shapes, Pipe, Sheets, Valves--new and used Steel Products: Structural, Bars, Plates, Shafting, Sheets, Rails, Cable --new and used 83 DUP210010715 1i TEXTILE FIBERS SEPARTIVIENT GENERAL OFFICE; Nemours Building Wilmington 98, Delaware TELEPHONE PRospect 4-1000 REGIONAL OFFICES: Akron Region Akron 8, Ohio Charlotte Region 191 South Main Street ("Dacron", Nylon, Rayon) 427 West Fourth -Street (Acetate, "Dacron", Nylon, "Orion", Rayon) HEmlock 4-6651 5-5561 New York Region New York 1, New York Empire State Building, 350 Fifth Avenue LOngacre 3-6400 (Acetate, "Dacron", Nylon, "Orion", Rayon) Philadelphia Region Wynnewood, Pennsylvania 308 East Lancaster Avenue TRinity 8-2700 !i (Acetate, "Dacron", Nylon, "Orion", Rayon, "Teflon") Providence Region 1! Rumford 16, Rhode Island 50 North Broadway GEneva 4-6500 i 1 (Acetate, "Dacron", Nylon, "Orion", Rayon) PLANTS: Camden, South Carolina ("Orion") Martinsville, Virginia (Nylon) Seaford, Delaware (Nylon) Chattanooga, Tennessee (Nylon) Old Hickory, Tennessee (Rayon) Waynesboro, Virginia (Acetate and Kinston, North Carolina ("Dacron") Richmond, Virginia (Rayon, Nylon "Orion") if i and "Teflon") ll i PRODUCTS Acetate Fiber: Textile fibers in the form of continuous filament yams available in natural and color-sealed, normal tenacity continuous filament yarns in various deniers and lusters. Us e : All branches of the textile industry. Packaged on tubes and cones in cases, and beams. NOTE: Acetate is a generic term for man-made fibers, monofilaments and continuous filament yams com posed of acetylated cellulose, with or without lesser amounts of non fiber-forming material. "Dacron1"' Polyester Fiber: Textile fibers in the form of normal and high tenacity continuous filament yarns, staple and tow. Us e : All branches of the textile industry. Availa ble in high tenacity and normal tenacity continuous fila ment textile yarns in various deniers and lusters; high tenacity bright continuous filament industrial yarns, staple and tow, in various deniers, and fiberfill. Continuous fila ment packaged on tubes in cases. Staple and tow packaged in bales and cartons. Fiberfill packaged in bales. NOTE: Polyester fiber is a generic term for a longchain synthetic polymer which contains 85% or more of the polymeric ester produced from the reaction of ethylene glycol and terephthalic arid or its derivatives and which is formed into a filament. Nylon Fiber: [66 nylon] Textile fibers in the form of con tinuous filament yarns, staple and tow. Us e : All branches of the textile industry. Available in high tenacity and normal tenacity continuous multifilament yams and mono filaments, and staple and tow in various deniers and lusters. Continuous filament packaged on bobbins and tubes in cases, and beams. Staple and tow packaged in bales and cartons. NOTE: Nylon is a generic term for any long-chain synthetic polymeric amide which has recurring amide groups as an integral part of the main polymer chain, and which is capable of being formed into a filament in which the structural elements are oriented in the direction of the axis. "Orion" Acrylic Fiber: Textile fibers in the form of tow and staple. Us e: All branches of the textile industry. Available in natural and color-sealed black normal tenacity staple and tow in various deniers and lusters. Staple and tow packaged in bales and cartons. NOTE: Acrylic fiber is a generic term for a long-chain synthetic polymer which contains 85 % or more acrylo nitrile and which is formed into a filament. Rayon Fiber: Textile fibers in the form of continuous fila ment yarns. Us e : All branches of the textile industry. Available in "Cordura" rayon yarn, "Super Cordura" high tenacity rayon yam, and normal tenacity continuous filament yarns in various deniers, specialty yarns and lusters. Packaged on cones, tubes, cakes, and bcam3. NOTE: Rayon is a generic term for man-made fibers, monofilaments and continuous filament yarns com posed of regenerated cellulose, with or without lesser amounts of non fiber-forming materials. "Teflon" TFE-Fluorocarbon Fiber: Textile fibers in the form of continuous filament yarns, staple and tow. Us e: Fabrics, fibrous sheeting, braided structures, and felts, primarily for industrial uses. Available in 400 and 1200 denier continuous filament, packaged on tubes and cones. Staple and tow available in 6.67 denier per filament packaged in bales and cartons. NOTE: TFE-Fluorocarbon fiber is a generic term for a long-chain synthetic polymer which contains 85% or more tetrafluoroethylene and which is formed into a filament. DUP210010716 DUP210010717 TRADEMARKS Du PONT'S trademarks are valuable assets, and should be treated and protected as such. The function of these trademarks is to identify the Du Pont Company as the source of the products to which they are applied, and to distinguish such products from those of other manufacturers. To accomplish this a trademark must remain an indication of source and not become the descriptive or generic term for a product, or class of products. When trademark significance is lost, exclusive right to the term is lost, too, and others may use it for similar products. Numerous once valuable trademarks, through misuse, have become descriptive words of the language. The name DU PONT and the well-known Du Pont oval are trademarks applied to all of the Company's products. There are numerous other trademarks which are applied to a single product, or to a line of products. Trademarks play an important role in the marketing of products. They must be protected at all times. The fol lowing procedures should be observed by Du Pont per sonnel and by others who have occasion to use or refer to Du Pont trademarks. Special procedures may be advisable for trademarks used on products covered by patents or those widely advertised to the public. The Legal Department should be consulted about these. 1. Make the Trademark Distinctive Always capitalize the first letter of the trademark and make it otherwise distinctive by use of quotation marks, capitalization, italics, or special printing. Such treatment will indicate that our trademarks are not common every day words of the language. 2. Indicate Registration Most Du Pont trademarks are registered in the United States Patent Office. When a registered trademark appears on the goods, containers, displays, tags, labels or in advertisements, the legend "Reg. U.S. Pat. Off." should also appear either beneath the mark or in a footnote keyed to the mark. In advertising and promotional ma terial a more informative legend is sometimes useful,* e.g. "Dacron" is Du Pont's registered trademark for its polyester fiber. Where space considerations make abbre viation desirable, the letter R in a circle, viz.: , may be used. If the trademark has not been registered, then it is important that there be no reference to registration. Instead, the legend should be simply "Trademark". 3. Make Du Pont Ownership Clear When other companies use one of our trademarks, it may be clear that the word is a trademark, but it may not be clear who owns it. In such cases, the mark should be identified as the property of the Du Pont Company. Where, however, the trademark applies only to a Du Pont raw material or ingredient, it should not be used to create the impression that it is the trademark for the finished goods. 4. Use the Generic Term with the Trademark To minimize the possibility of a trademark becoming the descriptive or generic term for the product, it is necessary that the public and the trade know what the generic or descriptive term is. Accordingly, the generic or descriptive term should be used at least once in all advertisements, promotional material, displays, labels, and published reports. It should also be used in corre spondence, unless one is certain that the recipients-- such as limited classes of industrial users--recognize the term so well as a trademark that the generic or descrip tive term is implied. Although there is no legal requirement that the generic or descriptive term immediately follow the trademark, it is suggested that in advertising and other promotional material, it immediately follow the trademark, and pref erably in the first paragraph of the body copy. 5. Encourage Proper Use by Others It is important that our trademarks be used properly, not only by Du Pont personnel, but also by others who use the marks, such as customers, finished goods manu facturers, and the public. Proper use of Du Pont trade marks by others should be encouraged. Improper uses should be discouraged and, if not discontinued, reported to the Legal Department. It is highly improper--for example--to use a Du Pont trademark or a similar word as a trademark for goods not manufactured by Du Pont, or to use a Du Pont trademark or a prominent part of it to coin a new trademark, or to use a Du Pont trade mark without so designating it. 87 DUP210010718 TRADEMARKS Key to Abbreviations D & C........................ Dyes and Chemicals Division, Organic Chemicals Department ELAS............................................................................Elastomer Chemicals Department ELCM....................................................................................Electrochemicals Department EXPL..................................................................................................Explosives Department FAB...........................................Fabrics Division, Fabrics and Finishes Department FIBR.......................................................................................... Textile Fibers Department FILM .............................................................................................................Film Department FIN...........................................Finishes Division, Fabrics and Finishes Department FRE............................."Freon" Products Division, Organic Chemicals Department GRAS............................................................................ Grasselli Chemicals Department PET........................Petroleum Chemicals Division, Organic Chemicals Department PHOT..................................................................................... Photo Products Department PIGM......................................................................................................Pigments Department POLY............................................................................................Polychemicals Department REM............................................................................Remington Arms Company, Inc. DUP210010719 TRADEMARKS Th e FOLLOWING list includes the more important product trademarks owned by E. I. du Pont de Nemours & Company (Inc.) or its domestic subsidiaries. In each instance the trademark is followed by the generic name of the product to which the mark is applied. Division or Department "7" Polish ...............................................................Fin "7'* Rubbing Compound.......................................Fin *"40" Outside White............................................... Fin *"552" Rubber Accelerator.................................... Elas "80S" Rubber Accelerator.................................. Elas "833" Rubber Accelerator.................................. Elas A *"Acetamine" Developer...................................... D&C "Acetamine" Dyes................................................. D&C "Adiprene" Urethane Rubbers............................Elas *"Adlux" Photographic Film................................Phot "Akroflex" Rubber Antioxidants....................... Elas "Alathon" Polyethylene Resins........................... Poly "Albone" Hydrogen Peroxide..............................Elcm "Alkanol" Surface Active Agents....................... D&C "Alkanol" Textile Processing Agents.................D&C "Animate" Weed and Brush Killers....................Gras "Antox" Rubber Antioxidant............................. Elas "Antoxide" Metal Primer....................................Fin "Aquarex" Mold Release Agents.......................Elas "Aquarex" Surface A.ctive Agents.....................Elas "Arasan" Thiram Seed Disinfectants and Protectants ........................................................ Gras "Aridex" Water Repellents.................................. D&C "Arlton" Combs....................................................Poly "Arlton" Toothbrushes.........................................Poly "Armalon" TFE-FluorocaTbon Fiber Felt.........Fab "Armalon" TFE-Fluorocarbon Resin Coated Glass Fabrics, Tapes and Laminates............ Fab "Artie" Methyl Chloride.......................................Elcm *"Auric" Ferric Oxide...........................................Pigm *"Auto Angling" Trap...........................................Rem "Avitex" Antistatic Developer............................D&C "Avitex" Softeners................................................. D&C "Avitex" Surface Active Agent........................... D&C "Avitone" Softeners ............................................. D&C B *"Black Jack" Enamel............................................ Fin "Blue Rock" Skeet Outfit....................................Rem "Blue Rock" Targets.............................................Rem "Blue Rock" Trap.................................................Rem "Butacite" Polyvinyl Butyral Resin.....................Poly c "Cadalyte" Bright Dip.......................................... Elcm "Cadalyte" Brightener..........................................Elcm "Cadalyte" Maintenance Compound................ Elcm "Cadalyte" Plating Salts......................................Elcm "Capracyl" Dyes...................................................D&C ^Denotes unregistered trademark; all others are registered. Division or Department "Catalite" Paste...................................................... D&C "Celanthrene" Dyes .............................................. D&C "Cel-O-Seal" Cellulose Bands............................. Film "Ceresan" Seed Disinfectants............................ .Gras "Chromacyl" Dyes ................................................ D&C *"CM" Flame Retardant..........................................Gras *"Combo" Synthetic Sponge................................. Film "Coppralyte" Addition Agent............................... Elcm "Coppralyte" Plating Salt......................................Elcm "Cordura" Rayon Yarn..........................................Fibr "Core-Lokt" Bullets .............................................. Rem *"Cronaflex" Engineering Reproduction Film .. .Phot *"Cronar" Arrow'Photographic Film.................... Phot *"Cronar" X-F Photographic Film...................... Phot "Cronar" Polyester Photographic Film Base... .Phot "Cyanegg" Sodium Cyanide................................. Elcm "Cyanobrik" Sodium Cyanide.............................Elcm "Cyanobrite" Mercury Salt................................... Elcm "Cyanoflake" Sodium Cyanide.............................Elcm "Cyanogran" Sodium Cyanide.............................Elcm "Cylan" Calcium Cyclamate..................................Gras "Cylan" Sodium Cyclamate................................. Gras *"Dacolyte" Addition Agent.................................. Elcm "Dacron" Polyester Fiber.................................... Fibr *"Dalamar" Azo Yellow.........................................Pigm *"Darsil" Oxidizing Agent.....................................Elcm "Decalm" Solvent................................................. D&C "Deenate" DDT Insecticide................................ Gras "Delrin" Acetal Resins........................................ Poly "Delsan" Seed Protectant.................................... Gras *"Dentabest" Toothbrushes .................................. Poly "DH" Photographic Emulsion........................... Phot "Diagen" Dyes .......................................................D&C "Dissolvo" Tar and Road Oil Remover............ Fin "Duclean" Inhibited Sulfuric Acid.....................Gras "Duclean" Inhibited Hydrochloric Acid.......... Gras "Duco" Cement...................................................... Fin "Duco" Enamels ....................................................Fin "Duco" Finishes ....................................................Fin "Duco" Lacquers ................................................. Fin "Duco" Lacquer Sealers .......................................Fin "Duco" Polishing or Rubbing Compound.........Fin "Duco" Primers ....................................................Fin "Duco" Primer-Surfacers .....................................Fin "Duco" Putties ......................................................Fin "Duco" Sealer ........................................................ Fin "Duco" Solvents ....................................................Fin "Duco" Thinners....................................................Fin 89 DUP210010720 TRADEMARKS Division or Department Division or Department "Duco" Mixing and Tinting Colors....................Fin "Fieldmaster" Rifle............................................... Rem "Duco" Undercoat ............................................... Fin "Flintflex" Enamels ............................................. Fin "Du-Lite" Enamels ............................................... Fin "Flow Kote" Paint............................................... Fin if; ^"Du-Lite" Undercoat ........................................... Fin *"Fluoro-Film" X-ray Film.................................. Phot "Dulux" Clear ........................................................Fin "Freon" Fire Extinguishing Agents................... Fre "Dulux" Enamels ................................................. Fin "Freon" Fluorinated Hydrocarbons................... Fre "Dulux" Finishes ................................................. Fin "Freon" Propellents ............................................. Fre "Dulux" Foam Resin ........................................... Fin 55 77 u/uiuA. r aima ............................................................................................................... "Freon" Refrigerants ........................................... Fre Solvents........... . , : . . ........................ ... Fre "Dulux" Primers .................................................... Fin "Freon"-MF Solvent.............................................. Fre "Dulux" Putties.......................................................Fin "Freon"-TF Solvent .............................................. Fre "Dulux" Reducers.................................................. Fin "Freon-11" Propellent ..........................................Fre "Dulux" Reinforcing Oil........................................Fin "Freon-11" Refrigerant ........................................Fre "Dulux" Stencil Paste ............................................Fin "Freon-12" Propellent .......................................... Fre "Dulux" Thinners .................................................. Fin "Freon-12" Refrigerant ........................................Fre "Dulux" Undercoat................................................ Fin "Freon-13" Refrigerant ........................................Fre "Dulux" Varnishes ................................................ Fin "Freon-22" Propellent ..........................................Fre "Dulux" Wood Filler ............................................Fin "Freon-22" Refrigerant ........................................Fre "Duobel" Explosives..............................................Expl "Freon-113" Propellent ....................................... Fre "Duol" Pigment...................................................... Figm "Freon-113" Refrigerant .....................................Fre "Duponol" Sodium Lauryl Sulfate......................D & C "Freon-114" Propellent ....................................... Fre "Duponol" Surface Active Agents......................D & C "Freon-114" Refrigerant .....................................Fre "Durobrite" Addition Agent.................................Elcm "Freon-13B1" Fire ExtinguishingAgent............ Fre "Dybar" Weed and Brush Killer..................... Gras "Freon-13Bl" Refrigerant.................................. Fre E "Elvacet" Polyvinyl Acetate................................Elcm "Elvanol" Polyvinyl Alcohol................................Elcm *"Endor" Rubber Peptizing Agent....................... Elas "Eureka" Soldering Flux....................................Gras "Expert" Trap....................................................... Rem * "Express" Buckshot Loads..................................Rem * "Express" Rifle Cartridges..................................Rem * "Express" Shotgun Shells.................................... Rem * "Express" Slugs..................................................... Rem "Extra" Dynamite................................................. Expl F "F-ll" Propellent................................................. Fre "F-ll" Refrigerant ............................................... Fre "F-12" Propellent ................................................. Fre "F-12" Refrigerant ............................................... Fre "F-13" Refrigerant ............................................... Fre "F-13B1" Fire Extinguishing Agent................... Fre "F-13B1" Refrigerant ........................................... Fre "F-22" Propellent ..................................................Fre "F-22" Refrigerant ............................................... Fre "F-ll3" Propellent ............................................... Fre "F-l 13" Refrigerant ............................................. Fre "F-114" Propellent ............................................... Fre "F-114" Refrigerant ............................................. Fre "Fabrikoid" Coated Fabrics................................ Fab "Fabrilite" Coated Fabrics................... ...............Fab "Fabrilite" Vinyl Materials.................................. Fab "Fairprene" Cements ........................................... Fab "Fairprene" Coated Fabrics................................ Fab "Fairprene" Sheet Stocks.....................................Fab "Fairprene" Tape ................................................. Fab "Fermate" Ferbam Fungicide.............................. Gras G *"G-942" Tanning Agent .....................................Gras "Gamemaster" Rifle ............................................. Rem "G.B.S." Sodium Bisulfate...................................Gras "Gelex" Dynamites............................................... Expl *"GelobeI" Explosives ........................................... Expl H "Halopont" Pigment Colors................................ D & C * "Harrison" Oil Colors.........................................Fin "Heliozone" Inhibitor...........................................Elas "Hexalin" Cyclohexanol.......................................Poly "Hi-Cap" Dynamite............................................. Expl "High Speed" Tinning Flux................................ Gras *"High Velocity" Buckshot Loads........................Rem * "High Velocity" Cartridges.................................. Rem *"High Velocity" Shells.........................................Rem * "High Velocity" Slugs........................................... Rem *"Highway Patrol" Cartridges.............................. Rem *"Hi-Speed" Cartridges ......................................... Rem "Hitec" Heat Transfer Salt.................................. Expl *"Hi-Velocity" Gelatin........................................... Expl "Hi-Way Master" Cartridges.............................. Rem *"Hydan" Feed Supplement.................................. Gras "Hydraphtal" Textile Processing Agent............. D & C "Hylene" Organic Isocyanates............................ Elas "Hypalon" Synthetic Rubbers.............................. Elas "Hytrol" Cyclohexanone....................................... Poly "Hytrol" Solvent.................................................... Poly I *"Impedex" Mold Inhibitor...................................Poly *"Inner-Belted" Bullets........... ................................Rem ^Denotes unregistered trademark; all others are registered. DUP210010721 Division or Department K "Karmex" Herbicide............................................ Gras "Kleanbore" Priming ............................................Rem "Kleanrol" Soldering Flux..................................Gras "Kloben" Weed .Killer .........................................Gras "Krumble Ball" Cartridges..................................Rem L * "La Belle" Combs................................................. Poly "Latyl" Carrier ...................................................... D&C "Latyl" Dyes..........................................................D&C "Lecton" Acrylic Resin Coated Fabrics and Laminates .......................................................... Fab "Lecton" Acrylic Resin Wire Enamels............ Fin "Leucosol" Dyes................................................... D&C *"Lido" Combs....................................................... Poly "Lignasan" Fungicide...........................................Gras *"Litho" Photographic Paper................................Phot "Lithosol" Acids and Bases.................................. D&C "Lithosol" Dyes ....................................................D&C "Lorol" Fatty Alcohols.........................................Poly *"Lucite" Acrylic Lacquers.................................. Fin "Lucite" Acrylic Resins.........................................Poly "Lncite" Acrylic Resin Dental Materials...........Poly *"Lucite" Solvent................................................... Fin *"Lucite" Thinner ..................................................Fin "Ludox" Colloidal Silica.....................................Gras "Lump Coal" Explosives.......................................Ex.pl "Lusane" Dyes ...................................................... D&C "Luxol" Dyes ........................................................ D&C M "Manzate" Maneb Fungicide.............................. Gras "Marlate" Methoxychlor Insecticides................. Gras "Matchmaster" Rifle.............................................Rem "Melsan" Fungicide ............................................. Gras "Merpentine" Surface Active Agent................. D&C "Merpol" Surface Active Agent..........................D&C *"Methacrol" Lubricants .......................................D&C *"Methacrol" Resin Dispersions............................D&C * "Mighty Mite" Stud Driver................................ Rem *"Moca" Curing Agent.........................................Elas "Monastral" Pigments...........................................Pigm "Monobel" Explosives ......................................... Expl "Mycoban" Calcium Propionate..........................Poly "Mycoban" Sodium Propionate......................... Poly "Mylar" Polyester Film .......................................Film N "Nalan" Water Repellent.................................... D&C "Naphthanil" Azoic Compounds....................... D&C "Naphthanil" Colors.............................................D&C "Naphthanil" Dye Bases...................................... D&C "Naphthanil" Pigments........................................ Pigm *"NC" Soil Compound.......................................... Gras "Neomerpin" Surface Active Agent...................D&C "Neozone" Rubber Antioxidants....................... Elas *"NFL" Wood Stains............................................ Fin `Denotes unregistered trademark; all others are registered. TRADEMARKS Division or Department "Nilite" Nitro Carbo Nitrate............................. Expl "Niox" Ammonium Nitrate................................Expl "Nitramex" Blasting Agent..................................Expl "Nitramite" Nitro Carbo Nitrate.......................Expl "Nitramon" Blasting Agents............................... Expl "Nogas" Pickling Agent...................................... Gras "NuGreen" Fertilizer Compounds.....................Poly "NuRexform" Lead Arsenate............................. Gras o "Ocenol" Oleyl Alcohol........................................ D&C *"Oil-Tite" Cartridges ........................................... Rem "Ondal" Oxidizing Agent.................................... D&C "Orel" Rubber Lubricant.................................... Fin "Orion" Acrylic Fiber.......................................... Fibr "Ortholeum" Grease Stabilizer........................... Pet "Ortholeum" Lubricant Assistant....................... Pet *"Ovalite" Undercoat.............................................Fin *"Oxone" Monopersulfate Compound.................Elcm P "Paramount" Toothbrushes ................................ Poly *"Park Avenue" Tooth, Nail, and Handbrushes. .Poly "Parzate" Nabam Fungicide..............................Gras "Parzate" Zineb Fungicide.................................. Gras "Patterson" Fluoroscopic Screens....................... Phot "Patterson" Intensifying Screens ........................Phot "Perclene" Perchlorethylene................................Elcm "Perdox" Sodium Borate Perhydrate.................Elcm "Permalux" Neoprene Accelerator..................... Elas "Permalux" Rubber Antioxidant......................... Elas "Petrowet" Surface Active Agents.....................D&C "Photo-Writ" Photocopy Paper......................... Phot "Polyac" Butyl Rubber Conditioner...................Elas "Ponsol" Dyes ......................................................D&C "Pontachrome" Dyes ........................................... D&C "Pontacyl" Dyes................................................... D&C "Pontamine" Developers...................................... D&C "Pontamine" Dyes ................................................D&C * "Power Guide" Stud Retainer............................Rem "Power Matic" Gas Operated Rifles and Shotguns ............................................................ Rem "Preparakote" Primer-Surfacers..........................Fin "Prep-Sol" Solvents............................................... Fin "Pro-Tek" Hand Cream.......................................Fin *"Pyrocore" Ignition Detonating Cord...............Exp! "PX" Book Cloth................................................. Fab Q "Quilon" Chrome Complex.................................. Gras R *"Ramapo" Pigments.............................................Pigm "Rangemaster" Rifle.............................................Rem "Red Cross" Dynamites...................................... Expl "Rocket" Cartridges ............................................. Rem "Roracyl" Dyes ....................................................D&C "Rotalin" Dyes ......................................................D&C 91 DUP210010722 TRADEMARKS Division or Department Division or Department *"Rubbertone" Rubber Finish..............................Fin *"Tryben" Weed Killer ..........................................Gras "Rug Anchor" Rug Underlay.............................. Fab *"Tufcote" Enamel.................................................. Fin "Rulan" Flame-Retardant Plastic....................... Poly *"Tufcote" Graining Ground .............................. Fin :1 *"Rustless" Priming ............................................... Rem *"Tufcote" Sealers (See Furniture Lacquer s Sealers) .............................................................. Fin *"Tufcote" Stain.......................................................Fin i "Scoremaster" Rifle............................................... Rem "Turtleback" Car Washing Sponge.......................Film "Seismex" Dynamites........................................... Expl "Two-Sixty-Two" Feed Compound.................... Poly *"Seismogel" Gelatin......... ,..................................Expl "Tynex" Nylon Bristles..........................................Poly "Semesan" Fungicide ........................................... Gras "Tynex" Nylon Filaments..................................... Poly "Semesan" Seed Disinfectant.............................. Gras "Semesan Bel" Dip Disinfectant........................Gras u j `i "Sevron" Dyes................... D&C "Shirlan" Fungicides............................................. D&C *"Unicel" Blowing Agent........... *"Unicel" Blowing Agent........... Elas Expl i "Shur Shot" Scatter Loads...................................Rem "Shur Shot" Shotgun Shells...................................Rem "Uramite" Fertilizer Compound "Uramon" Ammonia Liquors .. Poly Poly "Shur Shot" Target Loads...................................Rem "Sitol" Oxidizing Agent....................................... D&C "Solozone" Sodium Peroxide.............................. Elcm V * "Spatter-Less" Cartridges.....................................Rem * "Speed Easy" Wall Paint.......................................Fin "Speedmaster" Rifles............................................. Rem "Sportmaster" Rifle............................................... Rem "Sportsman" Shotgun........................................... Rem "Vantasol" Dyes................................................... D&C "Varigam" Photographic Papers........................Phot "Varilour" Photographic Papers..........................Phot "Velour Black" Photographic Papers................. Phot "Velvetex" Rug Cushion.......................................Fab *"SSS" Seismograph Blasting Caps........................Expl *"Stren" Spinning Line........................................... Poly "Stripkolex" Dynamite......................................... Expl "Victor" Shotgun Shells.......................................Rem "Victor" Spreader Loads .....................................Rem *"Viton" Synthetic Rubbers .................................Elas "Sulfanthrene" Dyes............................................. D&C "Volan" Bonding Agent.......................................Gras "Sulfogene" Dyes..................................................D&C "Sulforon" Wettable Sulfur...................................Gras w "Super Cordura" High Tenacity Rayon Yarn. .Fibr "Superior" Photographic Film............................ Phot *"SX" Photographic Film.......................................Phot *"Watchung" Pigments........................................... Pigm *"Wind-0-Band" Cellulose Seals..........................Film "Wingmaster" Shotgun.........................................Rem T "Target" Cartridges............................................... Rem "Wonder" Skeet Outfits.........................................Rem "Woodsmaster" Rifle............................................. Rem "Targetmaster" Cartridges ...................................Rem "Targetmaster" Rifle............................................. Rem *"Teflon" FEP-Fluorocarbon Film............... ... .Film "Teflon" TFE-Fluorocarbon Fiber..................... Fibr "Teflon" TFE-Fluorocarbon Resins................... Poly "Teflon" TFE-Fluorocarbon Resin Finishes.... Fin X *"X-12" Flame Retardant....................................... Gras *"X-F" Photographic Film.....................................Phot * "Xtra-Fast" Developer......................................... Phot *"Xtra-Fast" X-ray Film......................................... Phot "Teflon" TFE-Fluorocarbon Resin Wire Enamels.............................................................. Fin z "Telvar" Weed Killer........................................... Gras "Zalba" Rubber Antioxidant................................ Elas *"Tepidone" Rubber Accelerator..........................Elas "Zelan" Water Repellents..................................... D&C "Tersan" Thiram Fungicide................................ Gras *"Zelcon" Fabric Conditioner............................... D&C "Tetralin" Solvent..................................................D&C "Zelec" Antistatic Agents..................................... D&C "Tetrone" Rubber Accelerator............................ Elas "Zenite" Rubber Accelerators.............................. Elas "Thermoflex" Rubber Antioxidant......................Elas "Zenoton" Resin Finish..........................................D&C "Thionex" Rubber Accelerator............................Elas "Zerex" Anti-Freeze............................................. Poly "Thunderbolt" Cartridges.....................................Rem "Zerlate" Ziram Fungicide...................................Gras "Thylate" Thiram Fungicide................................ Gras "Zerone" Anti-Freeze........................................... Poly "Ti-Cal" Titanium Calcium Pigment................. Pigm "Zeset" Fabric Stabilizer........................................D&C "Ti-Pure" Titanium Dioxides.............................. Pigm "Zin-O-Lyte" Addition Agent.............................. Elcm * "Tontine" Flame Resistant Vinyl Drapery "Zin-O-Lyte" Brighteners.....................................Elcm Material.............................................................. Fab "Zin-O-Lyte" Salts..................................................Elcm "Tontine" Shade Cloth.........................................Fab *"Zobar" Weed Killer ........................................... Gras "Town & Country" Enamel...................................Fin "Zoron" Polymer Emulsions................................. D&C "Triclene" Trichlorethylene ................................ Elcm "Zoron" Resin Finish............................................D&C *"Trutint" House Paint Colors.............................. Fin "Zytel" Nylon Resins............................................. Poly "Denotes unregistered trademark; all others are registered. DUP210010723 DUP210010724 The Alphabetical Section As in previous editions, this Section lists and locates all products described - in detail in' the Departmental (White) Section. For convenience, the products are arranged in alphabetical sequence either by chemical name, generic name, trademark (if any), class heading or group classification. In this new and completely revised edition, there have been omitted some cross references and repetitious listings that experience has shown to be unnecessary. How To Use The Alphabetical Section B. If product bears a trademark-- . Here's how to locate products in the Departmental Section: Look for it alphabetically, e.g., "Capracyl" Dyes will be found under the C's. Where one trademark, however, covers several classes of products as with A. If the product is a member of a broad group or class-- Look for the group heading, e.g., Acids, Antioxi "Duco" and "Dulux", the reference gives only the group headings where the specific product may be found. dants, Blasting Agents, Dyes, Films, Fungicides, Leather Processing Agents, Photographic Paper, C. If you know the generic name of a product-- Pigments, Plastics, Rifles, Solvents, Surface Active Look for it alphabetically, e.g., Colloidal Silica, Agents, Varnishes, etc. p. 99 (See "Ludox"). If, however, the generic is This will give you either: the same as that of a broad class, e.g., Cartridges, Surface Active Agents, etc., then the pages are 1. Page reference only for the entire group of given on which the products appear. these products, if they appear close together in the White Section, e.g., D. If the product is a Chemical Salt-- Blasting Accessories, p. 13, 14, 15, 16 Look for it under the name of the metal rather Dyes, p. 55, 56, where all dyes are listed than the acid radical, e.g., Ammonium Nitrate i alphabetically appears under Ammonium, Calcium Carbonate is or under Calcium, etc. 2. Detailed listing and page numbers for indi vidual products that fall on pages widely sepa rated in the White Section, e.g., under the class heading Acid, you will find: Adipic, p. 72 E. If you are looking for Intermediates made by the Organic Chemicals Department-- You will find them listed alphabetically by name. Phosphoric, p. 46 Terephthalic, p. 18, etc. These products are not listed elsewhere in this Section by their chemical names. Products such as Sodium Carboxymethyl Cellulose which are better known by their organic residue (Carboxymethyl Cellulose) are listed under both the metal (Sodium) and the organic residue. DUP210010725 pr o duc t s Accelerators For Natural and Synthetic Rubber, 1, 2 Short Stop (See Sodium Dimethyl Carbamate), 47 Acetal Resins (See "Delrin"), 75 5-Acetamido-8-amino-2-naphthalenesulfomc acid Tech. 8-Acetamido-5-amino-2-naphthalenesulfonic acid Tech. 8-Acetamido-2-naphthalenesulfonic acid, magnesium salt Tech. "Acetamine" Developer, 56 "Acetamine" Dyes, 55 Acetate, Cellulose -- Fiber, 84 -- Film, 38 -- Flake, 17 -- Yam, 84 Acids Acetic, 41 Adipic, 72 Amino (See Methionine), 52 Battery, 42 Chlorosulfonic, 43 Diglycolic, 72 Engraver's (See Nitric Acid), 43 Formic, 44 Glycolic (See Hydroxyacetic Acid), 73 Hydrochloric, 44 Hydrofluoric, 44 Hydroxyacetic, 73 Lactic, 44, 45 "Lithosol", 55 Methionine, 52 Mixed, 17 Muriatic (See Hydrochloric), 44, 45 Nitrating (See Mixed Acid), 17 Nitric, Reagent, Tech., and Engraver's, 18, 45 Phosphoric, N. F., Tech., and Food Processing, 46 Propionic, 74 Sulfamic, 48 Sulfuric, 18 -- Reagent, 48 -- Fuming (See Oleum), 46 -- Inhibited (See "Duclean"), 43 -- Technical, 49 Terephthalic (TPA), 18 Acrylic Fiber (See "Orion"), 84 Acrylic Resin (See "Lucite"), 75 Acrylic Resin Coated Fabrics and Laminates (See "Lecton"), 20 Acrylic Resin Dental Materials (See "Lucite"), 75 Acrylic Resin Solutions (See Methacrylate Clear Finishes), 28 Acrylic Resin Wire Enamel (See "Lecton"), 28 Activator, Butyl Rubber (See "Polyac"), 1 Activator for Rubber Accelerators (See Zinc Stearate), 49 Addition Agents (Plating), 8, 9 Adhesives (See also Cements) Adhesives No. 60, No. 77, No. 78 and 78X, 41 Bookbinding (See Hot Melt Bookbinding Adhesives), 27 "Duco" Cement, 31 "Lucite", 75 "Ludox", 45 Methacrylates, 75 '-4-L -r ' veil., Polyvinyl Acetate (See "Elvacet"), 12 Polyvinyl Alcohol (See "Elvanol"), 12 Sodium CMC, 18 Sodium Silicate Solution, 48 "Adiprene" Urethane Rubber, 4 Adjuvant, Spray (See Spray Adjuvant), 54 "Adlux" Photographic Film, 69 Aerosol Propellents (See "Freon"), 60, 61 (See also Methyl Chloride, Methylene Chloride), 7, 8 Aerosols, Agricultural (See Garden Products), 53 Agricultural Chemicals (See Emulsifying Agents, Fungi cides, Insecticides, Weed Killers, etc.) Aircraft Rivets, 18 Akremite Blasting Agent, 16 "Akroflex" Rubber Antioxidant, 2 "Alathon" Polyethylene Resins, 75 "Albone" Hydrogen Peroxide, 10 Alcohols Cetyl (See "Lorol" 24), 73 Decyl (See "Lorol" 22), 73 Dodecyl (See "Lorol" 5 and "Lorol" 7), 73 Fatty (See "Lorol" Fatty Alcohols), 73 Lauryl (See"Lord" 5 and "Lorol" 7), 73 "Lord" Fatty Alcohols, 73 Methyl, 73 n-Octanol (See "Lord" 20), 73 Polyvinyl (See "Elvanol"), 12 Stearyl (See "Lord" 28), 73 "Alkanol" Surface Active Agents, 56 Aluminum Ammonium Sulfate, 41 -- Chloride, 41 -- Potassium Sulfate, 42 -- Stearate, 42 -- Sulfate, 42 Aluminum Complex, 42 Alums, 41 2,4-D Amine (See Lawn Weed Killer), 54 p-Aminoacetaniiide Tech. 5-Amino-2-(p-aminoanilino)benzenesulfonic acid Tech. 1-Aminoanthraquinone Tech. 2-Aminoanthraquinone Tech. N-(5-Amino-l-anthraquinonyl)anthranilic acid Tech. N-(8-Amino-l-anthraquinonyl)anthranilic acid Tech. 4-Aminoazobenzene-3,4'-disulfonic acid Tech. 4-Aminoazobenzene hydrochloride Tech. 4-Aminoazobenzene-4'-sulfonic acid Tech. Aminoazotolucnc Tech. 1 -Amino-4-benzamidcanthraquinone Tech. l-Amino-5-benzamidoanthraquinone Tech. 95 DUP210010726 PRODUCTS 6-(p-(-Aminobenzamido)benzamido)-l-naphthol3-suIfonic acid Tech. 6-(m-Aminobenzamido)-l-naphthol-3-sulfonic acid Tech. 6-(p-Aminobenzamido)-l-naphthol-3-sulfonic acid Tech. 5-Amino-2(3H)-benzimidazolone Tech. p-Aminobenzoic acid Tech. 1 -Amino-4-bromo-2-anthraquinonesulfonic acid, sodium salt Tech. 1 -Amino-4-bromo-2-niethy!anthraquinone Tscb. 1 -Amino-2-bromo-4-p-toIuidinoanthraquinone Tech. 1- Amino-5-chloroanthraquinone Tech. 1 -Amino- 8-chloroanthraquinone Tech. 2- Amino-1 -chloroanthraquinone Tech. 2-Amino-4-chlorophenol Tech. 1 -Amino-2,4-dibromoanthraquinone Tech. 1 -Amino-4,5-dichloroanthraquinone Tech. 5- Amino-2-(2,3-dihydro-2-oxo-5-benzimidazolylamino) benzenesulfonic acid Tech. p-Aminodiphenylamine Tech. 1 -Amino-4-hydroxyanthraquinone Tech. 1 -Amino-4-methoxyanthraquinone Tech. m-(4-Amino-3-methoxyphenylazo)benzenesulfonic acid Tech. l-Amino-2-methoxy-4-(p-tolylsulfonamido)anthra- quinone Tech. 1 -Amino-2-methylanthraquinone Tech. 1 -Amino-2-methyl-4-p-toluidinoanthraquinone Tech. l-Aminonaphth(2,3-c)acridine-5,8,14(13H)-trioneTech. 4-Aminonaphth(2,3-c)acridine-5,8,14(13H)-trione Tech. 6- Amino-l,3-naphthalenedisulfonic acid Tech. 7- Amino-1,3-naphthalenedisulfonic acid, disodium salt Tech. 4-Amino-1,5-naphthalenedisuIfonic acid, sodium salt Tech. 4-Amino-l,6(and 1,7)-naphthalenedisulfonic acid Tech. 7-Amino-l,3,6-naphthalenetrisuIfonic acid, potassium salt Tech. 4- Amino-l,3,5-naphthalenetrisulfonic acid, 4,5-sultam, trisodium salt Tech. l-Amino-7-naphthol Tech. 1- Amino-2-naphthol-4-sulfonic acid Tech. p-Aminophenol Tech. 2- Amino-1 -phenol-4-sulfonamide Tech. 2-Amino-l-phenol-4-sulfonic acid Tech. 1 - (m-Aminophenyl) -3-methyl-5-pyrazolone hydrochloride Tech. 1- (m-Aminophenyl)-5-oxo-2-pyrazoline-3-carboxylic acid Tech. 2- Aminotoluene-5-sulfonic acid, sodium salt Tech. 5- Amino-o-toluenesulfonic acid Tech. 5-Amino-2-(p-toluidino)benzenesulfonic acid Tech. 4-(4-Amino-m-tolylazo)-m-toluenesulfonic acid, sodium salt Tech. "Ammate" Weed and Brush Killers, 51 Ammonia, 72 Ammonia Gelatin (See Special Gelatin Dynamite), 16 Ammonia Liquors (See "Uramon"), 74 Ammoniacal Liquor, 72 Ammonium Chloride, 42 -- Hydroxide (See Ammoniacal Liquor), 72 -- C. P. Reagent and 26, 42 -- Nitrate, 17 -- Sulfamate, 42 -- (See also "Ammate"), 51 -- Sulfate, 72 -- Technical, 42 Ammunition, 79, 81 Anatase (See "Ti-Pure"), 71 Aniline, 17 Aniline Technical Aniline-2,5-disulfonic acid Tech. 1- AniIino-2-anthraquinonecarboxylic acid Tech. 1 -Anilino-4-hydroxyanthraquinone Tech. p-Anilinophenol Tech. o-Anisidine Tech. p-Anisidine Tech. o-Anisidinomethane sulfonic acid, sodium salt Tech. Anisole--Tech., 42 Anthelmintics Perchlorethylene, 8 Phenothiazine, 46 Anthraflavic acid Tech. Anthranilic acid Tech. Anthra (l,9(pyrazol-6)2H(-one) Tech. Anthraquinone (See "Catalite"), 56 1.5- Anthraquinonedisulfonic acid, disodium salt Tech. 1,8-Anthraquinonedisulfonic acid, disodium salt Tech. 2.6- Anthraquinonedisulfonic acid, disodium salt Tech. 1 -Anthraquinonesulfonic acid, sodium salt Tech. 2- Anthraquinonesulfonic acid, sodium salt Tech. N,N'-l,5-Anthraquinonylenedianthranilic acid Tech. 1,1'- (1,5-Anthraquinonylenediimino) dinaphth (2,3 -c) acridine-5,8,14(13H)-trione Tech. (1 -Anthraquinonyl)-1,2-hydrazinedisulfonic acid, disodium salt Tech. Anthrarufin Tech. Antichlor, Sodium Thiosulfate, 48 Antifoam Agents (See also Textile Specialties and "Lorol" 22, 24, 28), 73 Anti-Freezes, 74 Anti-Fume, 56 Antifume Agent, Zinc Plating (See Addition Agent 774), 8 Antiknock Agents, 63 Antioxidants, Gasoline and Oil, 62, 63 -- Natural and Synthetic Rubber, 2 Anti-Pit Agents, Plating, 8, 9 Anti-Rust and Water Pump Lubricant (Liquid), 30 Antiseptics (See Disinfectants, Fumigants, and Germicides) Sodium Sulfite, 48 Anti-Soil (See "Ludox"), 45 Antistall Additive, DMF, 62 Antistatic Agents, 59 Anti-Wrinkle Agent (See Force-Dry and Anti-Wrinkle Agent), 25 "Antox" Rubber Antioxidant, 2 Aphid and Mite Spray, 53 DUP210010727 PRODUCTS Aprons, Paper Machine, Materials for (See "Fabrikoid"), 20 Aqua Fortis (See Nitric Acid--Tech, and Engraver's Quality), 45 "Aquarex" Surface Active or Mold Release Agents, 2 "Arasan" Thiram Seed Disinfectants and Protectants, 51, 52 "Aridex" Water Repellents, 59 "Ailton" Combs (See Combs, Brushes and Toothbrushes), 77 "Armalon" TFE-Fluorocarbon Felt, 20 "Armalon" TFE-Fluorocarbon Coated Glass Fabrics, Tapes and Laminates, 20 "Arrow" Pan Photographic Film, 68 "Artie" Methyl Chloride (See Methyl Chloride), 7, 8 Asphaltums, Air-Drying Types, 27 "Auric" Ferric Oxide (See Pigment Colors), 70 "Auto Angling" Trap, 80 Auto Cleaners, Polishes, Sealers, Waxes, etc., 30, 31 Automotive Sealer (See Sealers), 26 Automotive Brake Fluids, 30 Automotive Fabrics (See "Fabrilite"), 19 Automotive Refinishing Materials, 25 "Avitex" Surface Active Agents, Antistatic Developers, Softeners, 57, 58 "Avitone" Softeners, 58 Azide, Lead, 17 4'4'"-Azobis-4-biphenylcarboxylic acid, disodium salt Tech. Azoic Compounds (See "Naphthanil"), 56 B Baby Carriage Materials (See "Fabrilite"), 19 Bags, Curing--for Molded Plywood (See "Fairprene"), 20 Bags, Tamping (See Tamping Bags), 14 Bands, "Cel-O-Seal", 39 Barium Carbonate, 42 BCO Surface Active Agent (See Product BCO), 58 Belt Material "Armalon" Coated Glass Fabrics, Tapes and Laminates, 20 "Fabrilite" Coated Fabrics, 19 Benzaldehyde-o-sodium sulfonate Tech. 4- (4-Benzamido-1 -anthraquinonylamino) naphth (2,3-c) - acridine-5,8,14(13H)-trione Tech. l-Benzamido-4-chIoroanthraquinone Tech. 1 -Benzamido-5-chloroanthraquinone Tech. 7H-Benz(de)anthracen-7-one Tech. Benzidine Yellow Pigments (See Pigment Colors), 70 Benzothiazyl Disulfide (See MBTS Benzothiazyl Disulfide), 1 o-Benzoylbenzoic acid Tech. Beta Lactose, Mixture with Nitroglycerin (See Nitro glycerin, Medicinal), 17 Beta Naphthol, 56 Bicycle Saddles, Fabrics for (See "Fabrilite"), 19 (3,3'-Bi-7Fl-benz[de]anthracene)-7,7'-dioneTech. (4,4'-Bi-7H-benz[de]anthracene)-7,7'-dione Tech. (l,T-Binaphthalene)-8,8'-dicarboxylic acid Tech. Binder (See "Ludox"), 12 Binders (See Vinyl Products), 12 Binding Material (See "Fabrikoid"), 20 1.4-Bis(l-anthraquinonylamino)anthraquinone Tech. 1.5-Bis( 1 -anthraquinonylamino)anthraquinone Tech. 4,4'-Bis(diethylamino)benzophenone Tech. 4,4'-Bis(dimethylamino)benzhydrol Tech. 4,4'-Bis(dimethylamino)benzophenoneTech. 1.5-Bis(2,4-dinitrophenoxy)-4,8-dinitroanthraquinone Tech. 1,4-Bis(2,4,6-triethylanilino)anthraquinone Tech. BL-353 Blowing Agent, 17 Blankets, Curing--Used in Laminating (See "Fairprene"), 20 Blasting Accessories, 13, 14, 15, 16 Blasting Agents, 16 Bleaching Agents Hydrogen Peroxide, 10 "Oxone", 11 "Perdox", 11 Potassium Permanganate, 46 Sodium Borate Perhydrate (See "Perdox" Sodium Borate Perhydrate), 11 -- Hydroxide, 47 -- Metabisulfite, 47 -- Perborate Tetrahydrate, 11 -- Peroxide, 11 -- Sulfite, 48 "Solozone", 11 Bleaching Assistants (See Textile Specialties), 57 (See also Sodium Silicate), 48 Blowing Agents BL-353 Blowing Agent, 17 "Unicel" Blowing Agents, 4, 18 Urea, 74 "Blue Rock" Skeet Outfit, Targets, Traps, 80 Blue Vitriol (See Copper Sulfate), 43 Body Stains, 7 Book Cloth (See "PX"), 19 Bookbinding Adhesives (See Hot Melt Bookbinding Adhesives), 27 Bookbinding Materials, 19, 20 Borax, 42 Brake Fluids, Heavy Duty, 30 Bright Dip Plating (See "Cadalyte"), 8 Bright Golds, Liquid (See Liquid Bright Golds), 7 Bright Palladiums (See Liquid Bright Palladiums), 7 Brighteners, Plating, 8, 9 Bristles, Nylon, 77 3-Bromo-7H-benz(de)anthracen-7-one Tech. 1- Bromo-4-methylaminoanthraquinoneTech. 2- Bromo-3-methylanthraquinone Tech. l-(9-Bromo-7-oxo-7H-benz[de]anthracen-3-yIamino)- anthraquinone Tech. 0- (3-Bromo-p-toluyl)benzoic acid Tech. 1- Bromo-2,4,6-triethylbenzene Tech. Brown Gold (Gold Powders), 7 Brush Killers, 51 Brushes (See Toiletries), 77 Buckshot Loads, 79 Bug Remover, 30 97 DUP210010728 PRODUCTS Buildings, 83 Cements (continued) Bullets, 79 . Burnish Golds, 7 "Butacite" Polyvinyl Butyral Resin, 75 Butter of Zinc (See Zinc Chloride), 49 p-Butylaniline Tech. 2-tert-Butylanthraquinone Tech. n-Butyl Methacrylate, 75 Butyl Rubber Activator (See "Polyac" and "Antox"), 1, 2 Household, 27 Oil-Proof (See Vinyl Products), 12 Padding (See Vinyl Products), 12 Polyvinyl Acetate (See "Elvacet"), 12 Polyvinyl Alcohol (See "Elvanol"), 12 Pyroxylin, 29 touivau,, taoo Special, 27 Thermoplastic, 27 C Waterproof "Cadalyte" Bright Dip, Brightener, etc., 8 Calcined Soda (See Sodium Carbonate), 47 Calcium Cyclamate (See "Cylan"), 50 -- Belt Cement, 27 --"Duco" Cement, 31 -- Household Cement, 27 i -- Peroxide, 10 -- Propionate (See"Mycoban"),73 Ceramic Products, 6 "Ceresan" Disinfectants, 52 -- Stearate, 43 "Capracyl" Dyes, 55 Car Upholstery Cleaner, 30 Car Wash, 30 Car Washing Sponge (See "Turtleback"), 40 Cetyl Alcohol (See "Lorol" 24), 73 Cetyl Betaine --"Aquarex", 2 -- Product BCO Surface Active Agent, 58 Car Wax (See New Car Wax), 31 Chemical Intermediates (See individual chemicals Carbamide (See Urea), 74 alphabetically) Carbonate Remover, 8 Chemicals, Surplus, 83 N,N'-Carbonylbis(4-methoxymetanilic acid) Tech. Chicago Acid Tech. Carboxymethyl Cellulose (See Sodium CMC), 18 Chile Saltpeter (See Sodium Nitrate), 47 I Carmine Pigment (See "Duol"), 70 Cartridges, 79, 80, 81, 82 Chlordane Dust, 53 Chlorides Carrier (See "Latyl"), 55 Case Coverings, Material for (See "Fabrikoid"), 20 Case Hardeners, 6 "Catalite" Paste, 56 ' Catalysts Dye (See "Catalite"), 56 Polymerization, 10 Caustic Potash (See Potassium Hydroxide), 46 Caustic Soda (See Sodium Hydroxide), 47 "Celanthrene" Dyes, 55 1,4-Dichlorobutane, 10 Methyl, 7 Methylene, 8 "Quilon", 46 Tetramethylene Chloride (See 1,4-Dichlorobutane), 10 "Volan", 49 Chlorinated Hydrocarbons (See Chlorine Products),7, 8 4-Chloro-2-aminobenzoic acid Tech. 2-Chloro-4-aminotoluene Tech. Cellophane, 38 4- Chloro-2-aminotoluene Tech. i Cellulose Acetate (See Acetate Flake), 17 6-Chloro-2-aminotoIuene Tech. Cellulose Bands and Seals (See "Cel-O-Seal"), 39 m-Chloroaniline Tech. Cellulose Sponge, 30, 39 (See Photographic Sponge), 69 Cellulose Sponge, Car Washing (See "Turtleback"), 40 Cellulose Sponge Yarn, 40 Cements (See also Adhesives) All Purpose Sealer, 30 0- Chloroaniline Tech. p-Chloroaniline Tech. Chloroanilines Mixed Tech. 5- Chloro-o-anisidine Tech. 1- Chloroanthraquinone Tech. Automotive Gasket, 21 l-Chloro-2-anthraquinonecarboxylic acid Tech. Belt, 27 Chlorobenzene Tech. Bookbinders (See Vinyl Products), 12 (See also Hot Melt Bookbinding Adhesives), 27 Cork (See Vinyl Products), 12 o-(p-Chlorobenzoyl) benzoic acid Tech. Chloroform, 7 "Duco", 31 4-Chlorometanilic acid Tech. "Fairprene", 20 i 1 -Chloro-2-methylanthraquinone Tech. 98 DUP210010729 PRODUCTS 2-Chloro-4-nitroaniline Tech. 4-Chloro-2-nitroaniline Tech. 4-Chloro-2-nitroanisole Tech. 1 -Chloro-5-nitroanthraquinone Tech. 1 -Chloro-8-nitroanthraquinone Tech. 4-Chloro-3-nitrobenzenesulfonamide Tech. 2-Chloro-5-nitrobenzenesulfonic acid, sodium salt Tech. 4-Chloro-2-nitrophenol Tech. 4-Chloro-2-nitrotoluene Tech. 4(and 6)-Chloro-2-nitrotoluene Tech. 6-Chloro-2-nitrotoluene Tech. Chloronitrotoluene (See "NC"), 45 4-Chlorophthalic acid Tech. Chloroprene (See Neoprene), 4 6-Chloroquinaldine Tech. 6-Chloroquinophthalone Tech. Chlorosulfonated Polyethylene (See "Hypalon" 20), 4 Chlorosulfonic Acid, 43 1-(2-Chloro-5-sulfophenyl)-3-methyl-5-pyrazolone Tech. o-Chlorotoluene Tech. (4-Chloro-o-tolylmercapto) acetic acid Tech. 2-Chloro-p-xylene Tech. "Chromacyl" Dyes, 55 Chromated Zinc Chloride (See CZC), 43 Chrome Complex (See "Quilon"), 46 Chrome and Metal Polish, 30 Chrysazin Tech. Cleaners (See also Detergents; Dry Cleaning Fluids) Auto (various), 30, 31 Gun and Equipment Cleaner, 26 Hand (See Waterless Hand Cleaner), 31 "Prep-Sol", 26 Cleaning Fluids (See Perchlorethylene and Trichlorethylene), 8 Clears (See also Varnishes) Bronzing Liquid, 21 "Duco" Clear Finish, 34 "Duco" Clear Sealer, 26 "Duco" Furniture Lacquer, 28 "Dulux" Clear, 28 "Dulux" Wood Finish, 28 Foil Lacquers, 28 Metal, 21, 28 Wood, 21 Cleve's Acid 1,6 Tech. Cleve's Acid 1,7 Tech. Cleve's Acid Mixed Tech. "CM" Flame Retardant, 43 CMC (See Sodium CMC), 18 Coated Fabrics, 19, 20 Coatings (See also Enamels, Lacquers, Paints, Plating and Varnishes) Ceramic and Glass (See Ceramic Products), 6 Chemical Resistant, 33 Conductive, 6 Fabric "Lucite", 75 Flexible "Butacite", 75 "Elvacet" and "Elvanol", 12 Coatings (continued) Paper "Alathon", 75 "Elvacet" and "Elvanol", 12 "Ludox", 45 Strippable, 29 Textile "Butacite", 75 Cellulose Acetate (See Acetate Flake), 17 "Elvacet" and "Elvanol", 12 Wire Cellulose Acetate (See Acetate Flake), 17 "Rulan", 76 "Teflon", 29 "Zytel", 76 Colloidal Silica (See "Ludox"), 45 Color-Sealed Acetate Yarns, 84 Color-Sealed "Orion" Acrylic Fiber (See "Orion"), 84 Colors (See also Dyes, Pigments, Paints) Ceramic, 6 Coated Fabrics and Coated Paper (See Pigment Colors), 70 "Duco" Mixing and Tinting Colors, 25 "Dulux" Mixing Enamels, 25 Gasoline, 63 Gold, 6 Ink (See Pigment Colors), 70, 71 Leather (See Pigment Colors), 70, 71 Linoleum (See Pigment Colors), 70, 71 Luster, 7 Oil (See "Harrison"), 37 (See also Oil Colors), 56 Overglaze, 6 Paint (See Pigment Colors), 70, 71 (See also "Duco", "Dulux"), 25 Paper (See Pigment Colors), 70, 71 (See also "Halopont"), 55 (See also "Monastral"), 55 Pigment, 70, 71 Rubber (See Pigment Colors), 70, 71 (See also Colors for Rubber and Latex), 3 Textile (See Dyes), 55 Wallpaper (See Pigment Colors), 70, 71 "Combo" Synthetic Sponge, 40 Combs ("Lido", "Ariton", "LaBelle", etc.), 77 Compounds "Duco" Polishing or Rubbing Compound, 22 Masking Compound, 25 "Naphthanil" Azoic Compounds, 56 "7" Rubbing Compound, 31 Shielding Compound, 22 Conditioner, Butyl Rubber (See "Polyac"), 3 Conductive Coating Materials, 6 Construction Tools and Materials, 83 Containers, 83 Cooling System Cleanser and Sealer, 30 Copper Cyanide, 8 Copper Inhibitor, 2 Copper phthalocyanine Tech. Copper phthalocyanine, semichloro Tech. 99 DUP210010730 PRODUCTS Copper Plating Chemicals, 8, 9 i-ii ! Copper Sulfate, 43 "DH" Dehydrated Photographic Emulsion, 68 "Diagen" Dyes, 55 Copper tetra(4) aminophthalocyanine Tech. Copper tetra(4) nitrophthalocyanine Tech. Copper-A Compound, 50 Copperized CZC Chromated Zinc Chloride, 43 "Coppralyte" Addition Agent, 8 "Coppralyte" Plating Salts, 9 "Cordura" Rayon Yarns, 84 "Core-Lokt" Bullets, 79 Cresidine Tech. "Cronaflex" Photographic Films, 67 "Cronar" Polyester Photographic Film and Film Base, 65 Cross Linking Agents (See Titanium Organics), 74 Curing Agent (See "Moca"), 3 1.4-Diaminoanthraquinone Tech. 1.5-Diaminoanthraquinone Tech. 2.6-Diaminoanthraquinone Tech. 4.8-Diaminoanthrarufin Tech. 1.4-Diamino-2,3-dichloroanthraquinone Tech. 1.4-DiaminG-2,3-dmydroantiiraquinone Tech. 3.6-Diamino-2,7-dimethylacridineTech. 3.6-Diamino-2,7-dimethylacridine sulfate Tech. 4,4'-Diaminostilbene-2,2'-disulfonic acid Tech. o-Dianisidine Tech. Diaphragm Materials (See "Armalon", "Fairprene"), 20 Diatomaceous Earth, 43 Curing Bags and Blankets (See "Fairprene"), 20 Diazo Dyes (See "Pontamine"), 56 Cyanide Products and Mixtures, 8,9, 11 Diazo Pigment Colors (See "Naphthanil"), 70 8-Cyano-l-naphthalenesulfonic acid, sodium salt Tech. 4,5'-Dibenzamido-l,l'-iminodianthraquinonc Tech. Cyclamate, Calcium and Sodium (See "Cylan"), 50 N,N-Dibenzylaniline Tech. Cyclohexanol (See "Hexalin"), 73 3.9-Dibromo-7H-benz(de)anthracen-7-one Tech. Cyclohexanone (See "Hytrol"), 73 Dibromo-8,16-pyranthrenedione Tech. Cyclotrimethylenetrinitramine, 17 2.5-Dichloroaniline Tech. "Cyclan" Calcium and Sodium Cyclamate, 50 3.4-Dichloroaniline Tech. CZC Chromated Zinc Chlorides, 43 D "Dacolyte" Addition Agent, 9 "Dacron" Polyester Fiber, 84 "Dalamar" Azo Yellow, 70 Dairy Cattle Spray, 52 "Darsil" Oxidizing Agent, 9 DDT Insecticides, 50, 53 "Decalin" Solvent, 59 Decanol (See "Lorol" 22), 73 2.5-Dichloroaniline-4-sulfonic acid Tech. 1.5-Dichloroanthraquinone Tech. 1,8-Dichloroanthraquinone Tech. 2.6-Dichlorobenzal chloride Tech. 1.4-Dichlorobutane (Tetramethylene Chloride), 10 Dichlorodifiuoromethane (See "Freon-12"), 60 N,N'-(2,5-Dichloro-3,6-dioxo-p-phenylene)bis(6-(2(3H)- oxo-5-benzimidazolylamino)metanilic acid) Tech. Dichloromethane (See Methylene Chloride), 8 "Deenate" Insecticide, 50 ij Degreasing Compounds 2.5-Dichloro-4-(3-methyl-5-oxo-2-pyrazolin-1 -yl)benzenesulfonic acid Tech. I "Freon 11", "Freon 113", 60, 61 3.4-Dichloronitrobenzene Tech. "Hydraphtal", 59 Dichlorotetrafluoroethane (See "Freon-114"), 61 Perchlorethylene, 8 Dieldrin (See "Delsan"), 52 Trichlorethylene, 8 2-Diethylaminoethyl methacrylate MS Tech. Dehydrothio-p-toluidine Tech. N,N-Diethyl-m-aminophenol Tech. Dehydrothio-p-toluidine-3-sulfonic acid Tech. N,N-Diethylaniline Tech. "Delrin" Acetal Resins, 75 N,N-Diethylcyclohexylamine Tech. "Delsan" Seed Protectant, 52 N,N-Diethylmetanilic acid, sodium salt Tech. "DenLabest" Toothbrushes (See Toothbrushes), 77 N,N-Diethyl-l-naphthylamine Tech. Deodorants Formaldehyde Solution, 9 Paraformaldehyde, 10 Zinc Peroxide, 11 Detergents (See also Fatty Alcohol Sulfates; Surface Ac tive Agents; Textile Processing Agents and Cleaners) Sodium Carbonate, 47 CMC, 18 Metasilicate, 47 Phosphate, 47 Developing Agents, Dye "Acetamine" Developer, 56 Beta Naphthol, 56 Hydrogen Peroxide, 10 N,N-Diethyl-m-toluidine Tech. Diffraction Filters, 66 2,3 -Dihydro-1,4-bis(methyIamino)anthraquinone Tech. 2,3-Dihydroquinizarin Tech. Dihydroxyviolanthrone Tech. Dimethyl Formamide, 43 Dimethyl Sulfate, 72 Dimethyl Terephthalate, 17 Dimethylamine, 43, 53 N,N-Diethyl-l-naphthylamine Tech. 2,2'-Dimethyl-1,1 '-bianthraquinone Tech. m-Dinitrobenzene 85" Tech. m-Dinitrobenzene 89 Tech. "Pontamine" Developers, 56 Dinitro-(3,3'-bi-7H-benz(de)anthracene)-7,7'-dione Tech. Sodium Perborate Tetrahydrate, 11 3.5-Dinitrobenzoic acid Tech. DUP210010731 PRODUCTS 2.4-Dinitrochlorobenzene Tech. 4.5-Dinitro-2,7-chrysazindisuIfonic acid, disodium salt Tech. 2.4-Dinitro-4'-hydroxydiphenylamine Tech. 2.4-Dinitrophenol Tech. 4,4'-Dimtrostilbeiie-2,2'-disodiurn sulfonate Tech. 2.4-Dinitrotoluene Tech. Dinitrotoluene Mixture Tech. Dinitrotoluene Oil Tech. 1.4-Di-p-toluidinoanthraquinone Tech. Di-o-tolylthiourea Tech. Dip Disinfectant (See "Semesan Bel"), 52 Dip, Livestock (See Livestock Chemicals), 52 Diphenylamine, 17, 53 Disinfectants (See also Fumigants, Germicides, Seed Disinfectants, and Soil Disinfectant) Calcium Peroxide, 10 Formaldehyde Solution, 9 Hydrogen Peroxide, 10 Sodium Perborate Tetrahydrate, 11 Zinc Peroxide, 11 Dispersing Agents (See Surface Active Agents), 56 "Dissolvo" Tar and Road Oil Remover, 30 DMA--Dimethylamine, 43 DMF--Dimethyl Formamide (See also Antistall Additive), 43, 62 Dodecanol (See "Lorol" 5 and "Lorol" 7) Dormant Spray Oil, 53 Drapery Material (See "Tontine"), 19 Dressings Tree Wound, 54 Rubber, 30 Dry Cleaning Fluids Dry-Clean (Spot Remover), 30 "Perclene", 8 "Triclene", 8 "Duclean" Inhibited Acids, 43 "Duco" and "Dulux" (See under group classifications, e.g., Enamels, Lacquers, Varnishes, Putties, etc.) "Duobel" Permissible Explosives (See Permissible Explosives), 15 "Duol" Pigments, 70 "Duponol" Surface Active Agents, 57 "Durobrite" Addition Agent 309, 9 Dusts, Floral, Garden, etc., 53 "Dybar" Weed Killer, 51 Dye Intermediates (See Individual Chemicals, Alphabetical) Dyeing Assistants, 58 Dyeing Auxiliaries, 56 Dyes (See also Colors, Pigments), 55, 56 Dynamites, 15, 16 ELA Elastomer Lubricating Agent, 3 Electrical Supplies, 83 Electroplating Products, 8, 9 "Elvacet" Polyvinyl Acetate Emulsions and Solutions, 12 "Elvanol" Polyvinyl Alcohol, 12 Emulsifying Agents (See Surface Active Agents and Textile Specialties), 56, 57 "Elvanol", 12 Emulsifying Agent A, 53 "Lorol" 24, 73 Rubber, 2 Enamel Pigments, 7 Enamels (See also Lacquers, Paints, and Varnishes) Aikaii-Resistant, 34 Asphaltums, 27 "Black Jack", 34 Chassis Black, 22 Color Conditioning Interior Flat Wall, 33 "Duco" Gloss, 34 "Duco" Lacquer, 28 "Duco" Lacquer Metalli-Chrome, 28 "Duco" Semi-Gloss, 34 "Du-Lite" Gloss White, 34 "Du-Lite" Undercoat, 34 "Du-Lite" Mill White, 34 "Dulux" Bulletin, 34 "Dulux" Color Conditioning Enamels, 34 "Dulux" Enamel and Paint Type Pigmented Finishes, 28 "Dulux" Automotive, 22, 25 "Dulux" Enamel Reducers, 25 "Dulux" High Bake (See Refrigerator and Washing Machine Finishes), 26, 35 "Dulux" Maintenance Enamels, 34, 35 "Dulux" Marine Finishes, 36 "Dulux" Mill White, 34 "Dulux" "Ovalite" Undercoat, 35 "Dulux" Refrigerator, 29 "Dulux" Sign, 29 "Dulux" Super-White, 35 "Dulux" Tank, 36 Engenamel, 28 Fender, 22 "Flintflex", 28 Floor (See Alkali-Resistant), 34, 35 Formvar, 28 Gas-Tank, 22 Glass, 6 Implement (See Tractor and Implement Enamels), 26 Industrial, 27 Inside Body Gray, 25 Interior Floor (See Alkali-Resistant), 34, 35 "Lecton" Wire Enamels, 28 Mildew-Resistant Undercoat, 35 Motor, 22, 25 "Ovalite" Undercoat (See "Dulux" "Ovalite"), 35 Packinghouse, 35 Porch and Floor, 35 Sash and Screen Paint, 35 Semi-Gloss, 35 Sign Finishes, 29 Small Parts Dip, 22 "Teflon" Wire Enamels (See Wire Enamels), 29 101 DUP210010732 PRODUCTS Enamels (continued) Fast Flush, 31 Tin Decorating Finishes, 29 `Town and Country", 35 Tractor and Implement, 26 "Tufcote" Heavy Duty, 35 Wire (SeeFormvar, "Lecton", "Teflon"), 28, 29 "Endor" Rubber Peptizing Agent, 3 Engraver's Acid (See Nitric Acid), 17, 45 EPN-300 Insecticide, 50 Epsom Salt (See Magnesium Sulfate), 45 Fatty Alcohol Sulfates, 57 Fatty Alcohols (See "Lorol"), 73 Feed Compound (See "Two-Sixty-Two"), 74 Feed Ingredients (See Nutrition Products), 52 Felt (See "Armalon"), 20 "Fermate" Ferbam Fungicide, 50 T?or-rJr> Ovtrlo TJTr/-3t*nfo/T CCoa 11 7A n;uiuivu WJ, ; ^ Ferro FTE (Fritted Trace Elements), 53 Ferrous Sulfate, 43 Equipment (See Machinery and Equipment), 83 Fertilizers 6-Ethoxy-2-mercaptobenzothiazole Tech. Ammonium Sulfate, 72 iiii 2-Ethoxy-l-naphthylamine Tech. 2-Ethoxy-1-nitronaphthalene Tech. Ethyl Methacrylate Polymer (See "Lucite"), 75 "Nugreen", 74 "Uramite", 74 "Uramon", 74 Urea, 74 3-Ethylamino-p-cresol Tech. Fiber Lubricants, 57, 58 3-Ethylamino-p-toluenesulfonic acid Tech. Fibers (See Staple Fibers, Yarns) N-Ethylaniline Tech. Fibrous Potassium Titanate, 71 alpha-(N-Ethylanilirio)-m-toluenesulfonic acid Tech. `Fieldmaster" Rifle, 78 i N-Ethyl-N-benzylaniline Tech. N-Ethyl-N-benzyl-m-toluidineTech. Fillers, Metal, 28 Fillers, Wood "Dulux" Paste Filler, 23 N-Ethyl-alpha-naphthylamineTech. Paste Wood Filler, 37 N-Ethyl-m-toluidine Tech. Wood Fillers, Industrial, 28 N-Ethyl-o-toluidine Tech. alpha-(N-Ethyl-m-toluidino)-m-toluenesulfonicacid Tech, "Eureka" Soldering Flux (See Flux, Soldering and Fluxes, Soldering Liquid), 44 "Expert" Trap, 80 Explosive Rivets (See Aircraft and Industrial Rivets), 18 Explosives, 15, 16 Films Acetate, 38 Cellulose (See Cellophane), 38 Dosimeter, 66 Industrial and Graphic Arts Films, 66, 67 Motion Picture, 55, 56 Packaging, 38, 39 Screen Process, 67 "Express" Buckshot Loads, Cartridges, Shells, etc., 79, 80 Sheet, 68 "Extra" Dynamite (See "Red Cross" "Extra"), 15 Special Products, 65, 69 X-ray, 65, 66 F Filter Fabrics (See "Armalon"), 20 "F-ll", "F-12", "F-13", etc., Refrigerants and Filters, Diffraction, 66 Propellents, 60 Filters, Plastic (See Plastic Filters), 69 F Salt Tech. Finishes (See also Enamels, Lacquers, Paints and Fabric Cleaners (See Dry Cleaning Fluids), 30 Fabric Conditioner (See "Zelcon"), 59 Fabric Stabilizer (See "Zeset"), 59 Varnishes) Airplane, 27 "Duco" Clear, 34 "Dulux" Clear Exterior, 28 Fabrics "Dulux" Marine, 3 6 Pyroxylin Coated and Impregnated, 20 "Dulux" Wood, 28 Rubber and Synthetic Rubber (See "Fairprene"), 20 Epoxy Chemical Resistant, 33 Silicone Coated, 20 Synthetic Resin Floor, 35 Furniture, 28 !i "Armalon", "Fabrilite" and "Lecton", 19, 20 Industrial Floor, 37 "Fabrikoid" Pyroxylin Coated Fabrics, 20 Methacrylate Clear, 28 "Fabrilite" Unsupported Vinyl Material, 19 Penetrating Wood, 37 "Fabrilite" Vinyl Coated Fabrics, 19 Railway, 29 "Fairprene" Industrial Cements, 20 Refrigerator, 29 "Fairprene" P.A.W. Tape (Protective and Waterstop), 20 Sign, 29 "Fairprene" Synthetic Rubber Coated Fabrics and "Teflon", 29 Sheet Stocks for various uses, 20 Washing Machine, 29 DUP210010733 PRODUCTS Fire Extinguishing Agent (See "Freon-13B1"), 60 Flame Retardants Ammonium Sulfamate, 42 Ammonium Sulfate, 42 "CM", 43 CZC Chromated Zinc Chloride, 43 "X-12", 49 "Flintflex" Enamels, 28 Floral Dust, 53 "Flow Kote" Rubber Base Wall Paint, 35 Flowers of Sulfur Sublimed (See Sulfur), 48 Fluorescent Chemicals (See Luminescent Chemical Products), 69 Fluorinated Hydrocarbons (See "Freon" Propellents, Refrigerants, etc.), 60, 61 "Fluoro-Film" X-ray Films, 65 Fluoroscopic Screens (See "Patterson"), 66 Fluosilicate, Sodium, 47 Fluxes Ceramic (See Fluxes), 6 Galvanizing (See Zinc Ammonium Chloride and Ammonium Chloride), 42, 49 Sodium Silicofluoride, 48 Soldering, 44 Soldering Liquid (See Fluxes, Soldering Liquid), 44 Tinning, 44 Foam Cleaner, 31 Foam Resin (See "Dulux" Foam Resin), 22, 28 Force-Dry and Anti-Wrinkle Agent, 25 Formaldehyde Solution, 9, 10 Formamide, JZ?" 7^Formanilide Tech. Formaniline Tech. Formic Acid, 44 o-Formotoluidide Tech. Formvar Wire Enamels, 28 "Freon" Propellents, Refrigerants, Solvents, 60, 61 Frits (See Fluxes), 44 Fritted Trace Elements (See Ferro FTE), 53 Fruit Tree Spray, 53 Fuel Oil Additive No. 2, 62 Fumigant, Soil (See VPM), 51 Fumigants (See also Disinfectants) Formaldehyde Solution, 9 Methyl Formate, 73 Paraformaldehyde, 9 Sodium Cyanide, 12 Fungicides (See also Insecticides, Seed Disinfectants, etc.) Agricultural, 50, 51 Industrial IN-2555, 44 "Lignasan", 45 Paraformaldehyde, 10 "Shirlan", 58 Furan (Furfurane), 10 Furniture, 83 Fuse Lighters, Fuses, etc., 14 G G Salt Tech. "G-942" Tanning Agent, 44 "Gamemaster" Rifle, 78 Gamma Acid Tech. Garden Products, 53 Gas Guard, 31 Gaskets. Materials for (See "Armalon". "Fairprene"), 19 Gasoline Antioxidants, 62, 63 Gasoline Colors, 63 "G. B. S." Globular Sodium Bisulfate (See Sodium Bisulfate), 44 Gelatin, 15 Gelatins, Blasting "Gelex" Dynamites, 15 "Gelobel" Permissible Explosives, 15 Germicides (See also Disinfectants, Fumigants) Copper Sulfate, 43 Paraformaldehyde, 10 Glass Enamels, 6 Glass Fabrics, Tapes and Laminates, Coated (See "Armalon", "Lecton"), 20 Glaze Stains, 7 Gold, Gold Colors, Gold Powders, 6, 7 Grease Stabilizer (See "Ortholeum" 300), 63 H H Acid Tech. Halogen Tin Addition Agent 2 Special, 9 Halogen Tin Plating Process, 9 Halogenated Hydrocarbons (See Chlorine Products), 7 (See also "Freon"), 60, 61 "Halopont" Pigment Colors, 55 Hand Brushes (See Toiletries), 77 Hand Cleaner (See Waterless Hand Cleaner), 31 Hand Protective Cream (See "Pro-Tek"), 31 Handbag Materials (See "Fabrilite"), 19 "Harrison" Oil Colors, 37 Heat Transfer Agent, Anisole, 42 Heat Transfer Media "Freon-114", 61 "Hitec", 17 Methylene Chloride, 7, 8 Perchlorethylene, 8 Sodium, 11 Trichlorethylene, 8 Heat Transfer Salts "Hitec", 17 Potassium Nitrate, 46 Sodium Nitrite, 18, 47 Heat Treating Compounds, 11 "Heliozone" Inhibitor, 3 "Hexalin" Cyclohexanol, 73 Hexamethylenetetramine, 10 "Hi-Cap" Dynamite, 15 "High Speed" Tinning Flux, 44 "High Velocity" Buckshot Loads, Cartridges, etc., 82 "Highway Patrol" Cartridges, 82 103 DUP210010734 PRODUCTS "Hi-Speed" Cartridges, 80 J "Hitec" Heat Transfer Salt, 17 J Acid Tech. "Hi-Velocity" Gelatin, 15 I Acid Urea Tech. "Hi-Velocity" Seismograph 60% Gelatin, 15 Jet Perforators, 17 "Hi-Way Master" Cartridges, 80 Jet Tappers, 14 .t! Homophthalic Acid Tech. Hot Melt Bookbinding Adhesives, 27 K "Hydan" Feed Supplement, 52 "Karmex" Herbicides, 51 "Hydraphtai" Textile Processing Agent, 58 "Kleanbore" Priming (See Remington Ammunition), 79 Hydrocarbons, Chlorinated (See Chlorine Products), 7 "Kleanrol" Soldering Flux (See Flux, Soldering), 44 Hydrogen Peroxide, 10 "Kloben" Weed Killer, 51 Hydroxides Koch Acid Tech. -- Ammonium (See Ammoniacal Liquor), 72 "Krumble Ball" Cartridges, 82 -- C.P. Reagent and 26, 42 -- Potassium, 46 -- Sodium, 47 1 -Hydroxy-4- (alpha-hydroxy-m-toluidino) anthraquinone Tech. l-Hydroxy-4-p-toluidinoanthraquinone Tech. "Hylene" Organic Isocyanates, 3 "Hypalon" Synthetic Rubber, 4 Hyperpure Silicon, 71 "Hytrol" Cyclohexanone, 73 "Hytrol" Wood Dye Stain Solvent, 73 L "La Belle" Combs (See Combs and Brushes), 77 Laboratory Reagents, C.P. Acetic Acid, 41 Ammonium Hydroxide, 42 Hydrochloric Acid, 44 Nitric Acid, 45 - Sulfuric Acid, 48 Lacquers (See also Enamels, Paints and Varnishes) Acrylic (See "Lucite"), 22, 25 Airplane Finishes, 27 I Bronzing Liquid, 21, 27 Dip, 22 I.M.R. (See Improved Military Rifle Powders), 18 1,1 'Tminobis (4-aminoanthraquinone) Tech. l,T-Iminobis(5-benzamidoanthraquinone) Tech. "Duco" Furniture Lacquer, 28 "Duco" Lacquers, Automotive, 22 "Duco" Lacquer Enamels, 28 1 ,l'-Iminobis(4-nitroanthraquinone) Tech. 1,1 '-Iminodianthraquinone Tech. `Duco" Lacquers, Metalli-Chrome, 22, 25 "Duco" Lacquer Thinners, 25 "Impedex" Sodium Propionate, 73 "Duco" Striping Lacquers, 22, 25 Inhibitors Foil, 28 Acid and Rust, 30 Furniture, 28 Copper Inhibitor 65, 3 Gloss (Automotive Refinishing), 25 Copper in Petroleum Products (See Metal "Lucite", 22, 25 Deactivator), 63 Metal, 21, 22, 28 Corrosion (See SodiumMBT 50% Solution), 59 Paper, 28 ! Gasoline Oxidation, 62, 63 Wood, 21 Grease and Light Oil Oxidation (See Antioxidant Laminates (See "Armalon", "Lecton"), 20 No. 29), 63 Latex Chemicals (See Rubber Chemicals), 2 Mold and Rope (See "Mycoban"), 73 Latex Colors (See Colors for Rubber and Latex), 4 Polymerization (See Phenothiazine), 46 "Latyl" Carrier A and Dyes, 55 ! Rust, 30 Laurent's Acid Tech. Sun-Checking (See "Heliozone"), 3 Lawn Weed Killers, 54 Sun Exposure Cracking (See NBC), 3 Lead Arsenate Insecticide, 50 "Inner-Belted" Bullets, 82 Lead Plating Products (See Sulfamate) Insecticides (See also Fungicides), 50 Leading Wire, 14 Insulation, Electrical Leather Processing Agents (See also Dyes and Pigments) Enamels for (See Formvar, "Lecton", "Teflon") ,28, 29 "Alkanol" B Surface Active Agent, 56 Material for (See "Armalon" and "Lecton"), 20 Aluminum Ammonium Sulfate, 41 Intensifying Screens (See "Patterson" Intensifying Aluminum Potassium Sulfate, 42 Screens), 66 Aluminum Sulfate, 42 Intermediates (See Individual Chemicals, Alphabetical) Ammonium Chloride, 42 Iron Oxide, 17 Ammonium Hydroxide, 42 Isobutyl Methacrylate Polymer (See "Lucite"), 74 "Avitone" Softener, 58 Isocyanates, Organic (See "Hylene"), 3 "Duponol" Paste Surface Active Agents, 59 1,3-Isoquinolinediol Tech. "Elvacet" Polyvinyl Acetate Emulsion, 12 Isoviolanthrone Tech. Formaldehyde Solution, 9 DUP210010735 PRODUCTS Leather Processing Agents (continued) Formic Acid--Tech., 44 "G-942" Tanning Agent, 44 "Hydraphtal" Textile Processing Agent, 59 Hydrochloric Acid--Tech., 44 Hydroxyacetic Acid--Tech., 73 Lactic Acid--Tech., 45 "Lucite" Acrylic Resin, 75 "Merpeniine" Surface Active Agent, 59 "Merpol" C Textile Processing Agent, 59 "Methacrol" Resin Dispersion, 59 Methacrylate Polymers (See "Lucite"), 75 "Neomerpin" N Surface Active Agent, 59 Pigments, 70 Sodium Acetate--Anhydrous Tech., 46 -- Bicarbonate, 47 -- Bichromate--Tech., 47 -- Metabisulfite--Tech., 47 -- Sulfate--Anhydrous Tech., 48 -- Sulfide--Concentrated Tech., 48 -- Thiosulfate, 48 Sulfamic Acid--Tech., 48 Sulfuric Acid--Tech., 48 "Zoron" TR Polymer Emulsion, 59 "Lecton" Acrylic Resin Coated Fabrics and Laminates, 20 "Lecton" Acrylic Resin Wire Enamels, 28 "Leucosol" Dyes, 55 "Lido" Combs (See Combs and Brushes), 77 "Lignasan" Fungicide, 45 Liquid Bright Golds, 7 Liquid Bright Palladiums, 7 "Litho" Photographic Paper, 67 "Lithosol" Acids, Bases and Dyes, 55 "Lorol" Fatty Alcohols, 73 Lube Oil Additives and Assistants, 63 Lubricants "Avitex" Antistatic Developer, 57 "Avitex" Softener, 57, 58 "Avitone" Softener, 58 ELA Elastomer Lubricating Agent, 3 "Lorol" 28 Normal Stearyl Alcohol, 73 "Methacrol" Lubricant, 58 Mold (See "Aquarex"), 2 "Orel" Rubber Lubricant, 31 Spinning, 58 Water Pump (See Anti-Rust and Water Pump Lubricant), 30 Zinc Stearate, 49 "Lucite" Acrylic Lacquers, 22, 25 "Lucite" Acrylic Resins, 76 "Lucite" Solvent, 23 "Lucite" Thinner, 23 "Ludox" Colloidal Silica---Tech., 45 Luggage, Fabric for (See "Fabrikoid", "Fabrilite"), 19,20 Luminescent Chemical Products, 69 "Lump Coal" Permissible Explosives, 15 "Lusane" Dyes (Brilliant Blue B), 55 Luster Colors, 7 "Luxol" Dyes, 55 M Machinery and Equipment, 83 "Manzate" Maneb Fungicide. 50 "Marlate" Methoxychlor Insecticide, 50 Masking Compound, 25 . "Matchmaster" Model 513T Rifle, 79 Meat Curing Compound, 50 MBT (2-Mercaptobenzothiazole), 1 . MBT Sodium (See Sodium MBT) MBTS (Benzothiazyl Disulfide), 1 "Melsan" Fungicide, 50 "Merpol" Surface Active Agent, 58 Metal Deactivator, 63 Metal Degreasing Compounds--Perchlorethylene and Trichlorethylene, 8 Metal Descaling and Pickling "Duclean" Acids, 43 "Freon" Solvents, 61 Hydrochloric Acid--Tech., 44 Nitric Acid--Tech., 45 Sodium, for Sodium Hydride Descaling Process, 11 Sulfamic Acid, 48 Sulfuric Acid--Tech., 49 Metal Polish, 31 Metal Scrap--Ferrous and Nonferrous, 83 "Methacrol" Lubricants, 5 8 "Methacrol" Resin Dispersions, 58, 59 Methacrylates (See "Lucite"), 76 Methacrylato Chromic Chloride (See "Volan"), 49 Methanol (See also Commercial Methanol Anti-Freeze), 73 Methionine and Hydroxyanalogue, 52 1-Methoxyanthraquinone Tech. Methoxychlor Insecticides, 50, 53 1 -Methoxy-4-nitroanthraquinone Tech. Methyl Alcohol (See Methanol), 73 Methyl Chloride (See also "Artie"), 7 Methyl Formate--Tech., 73 1-Methylaminoanthraquinone Tech. N-Methylaniline Tech. 3 -(N-Methylanilino)propionitrile Tech. 1 -(3 -Methyl-2-anthraquinonyIamino)-5-(7-OXO-7H- benz[de]anthracen-3-ylamino) anthraquinone Tech. Methylating Agents Dimethyl Sulfate (Methyl Sulfate), 72 Methyl Chloride, 7 N-Methylcyclohexylamine Tech. p,p'-Methylenebis (N,N-dimethylaniline) Tech. Methylene Chloride (Methylene Dichloride), 7 N-Methylglucamine Tech. 4-Methyl-2-nitroanisoIe Tech. 2-Methyl-1-nitroanthraquinone Tech. 105 DUP210010736 PRODUCTS "Mighty-Mite" Stud Driver, 80 Mildew Resisting Agents (See "Shirlan"), 58 Mill Supplies, 83 Mirbane, Oil of (See Nitrobenzene), 17 Mixed Acid, Technical (Nitrating Acid), 17 M.O.A. Motor Oil Additive, 31 "Moca" Curing Agent, 3 Mold and Rope Inhibitors (See "Mycoban"), 73, 74 Mold Lubricants (See "Aquarex"), 2 Mold Release Agents, Natural and Synthetic Rubber (See "Aquarex"), 2 Molding Powders (See Plastics) "Monastral" Pigments, 55 (See also Pigment Colors), 71 "Monobel" Permissible Explosives, 15 Monobromotrifluoromethane (See "Freon-13B1"), 60 Monochlorodifluoromethane (See "Freon-22"), 60 Monochloromethane (See Methyl Chloride), 7 Monochlorotrifluoromethane (See "Freon-13"), 60 Monomethylamine--Anhydrous and Aqueous Solutions Tech., 45 Monopersulfate Compound (See "Oxone"), 11 Mordants, Textile Ferrous Sulfate--Tech., 43 Lactic Acid--Tech., 44 Sodium Acetate--Anhydrous Tech., 46 Motion Picture Films, 64 Motion Picture Screens, Fabrics for (See "Fabrilite"), 19 Motor Mix (See Tetraethyl Lead Compound), 63 Muriate of Ammonia (See Ammonium Chloride), 42 Muriate of Potash (See Potassium Chloride), 46 Muriate of Tin (See Stannous Chloride), 48 "Mycoban" Calcium and Sodium Propionate, 73 "Mylar" Polyester Film, 39 N Nail Brushes (See Toiletries), 77 "Nalan" Water Repellent, 58 Naphthalene-2,7-disulfonic acid Tech. "Naphthanil" Azoic Compounds, 56 "Naphthanil" Diazo Colors, 56 "Naphthanil" Diazo Pigments, 70 "Naphthanil" Dye Bases, 55 o-Naphthionic acid Tech. alpha-Naphthol Tech. Naphthol, Beta (See Beta Naphthol), 56 Naphthostyril Tech. alpha-Naphthylamine Tech. (2-Naphthylmercapto)acetic acid Tech. NBC Sun Exposure Cracking Inhibitor, 3 "NC" Soil Compound, 45 Negative Films, 64 "Neomerpin" N Surface Active Agent, 58 Neoprene Accelerator (See "Permalux"), 1 Neoprene Latices, 4 Neoprene, Various Types, 4, 5 "Neozone" Rubber Antioxidants, 2 Nevile & Winther's Acid Tech. 106 New Car Wax, 31 "NFL" Wood Stains, 28 "Nilite" Blasting Agent, 16 NI Seed Disinfectant (See "Ceresan" NI Seed Disinfectant), 52 Niobium Metal, 71 "Niox" Ammonium Nitrate (See Ammonium Nitrate), 17 Niter (See Potassium Nitrate), 46 Niter Cake (See Sodium Bisulfate), 47 "Nitramex" Blasting Agent, 16 "Nitramite" Nitro Carbon Nitrate, 16 "Nitramon" Blasting Agents, 16 Nitrates Cellulose (See Nitrocellulose), 17 PentaerythriteTetranitrate (PETN), 17 Nitriding Compounds (See Case Hardening Compounds) 2-Nitro-p-acetanisidide Tech. 3-Nitro-4-aminoanisole Tech. 4-Nitro-2-aminophenol Tech. 4- Nitro-2-aminotoluene Tech. 5- Nitro-2-aminotoluene Tech. m-Nitroaniline Tech. 4-Nitroaniline-2-sulfonic acid Tech. 0- Nitroanisole Tech. p-Nitroanisole Tech. 1-Nitro-2-anthraquinonecarboxylic acid, sodium salt Tech. m-Nitrobenzaldehyde Tech. 6-(p-(p-Nitrobenzamido)benzamido)-1 -naphthol-3 - sulfonic acid Tech. 6-(p-Nitrobenzamido)-l-naphthol-3-sulfonic acid Tech, Nitrobenzene, 17 Nitrobenzene Tech. 5- Nitro-2(3H)-benzimidazolone Tech. p-Nitrobenzoic acid Tech. 4'-Nitro-4-biphenylcarboxylic acid, sodium salt Tech. Nitrocellulose--Soluble Types, 17 o-Nitrochlorobenzene Tech. p-Nitrochlorobenzene Tech. m-Nitroformanilide Tech. Nitroglycerin, 15, 17 alpha-Nitronaphthalene Tech. 4-Nitro-o-phenylenediamine Tech. p-Nitrooxanilic acid Tech. 2- Nitro-p-cresol Tech. p-Nitrophenetole Tech. 0- NitrophenolTech. p-Nitrophenol Tech. 1- (m-nitrophenyl)-3-methyl-5-pyrazolone Tech. 4-Nitrophthalimide Tech. p-Nitro sodium phenolate Tech. m-Nitrotoluene Tech. o-Nitrotoluene Tech. p-Nitrotoluene Tech. Nitrotoluenes Mixed o-m-p Tech. DUP210010737 PRODUCTS 4-Nitrotoluene-2-su]fonic acid Tech. "Nogas" Metal Pickling Agent, 46 "NuGreen" Fertilizer Compounds, 73 "NuRexform" Standard Lead Arsenate (See Lead Arsenate Insecticide), 50 Nylon Bristle, Plastics, Resins, etc., 76 Fiber, 84 Wire Enamel (See Wire Enamels), 29 O "Ocenol" Oleyl Alcohol, 59 Octyl Alcohol (See "Lorol" 20), 73 Oil Additives (See Lube Oil Additives), 62, 63 Oil Blue, Bronze, Orange Red, etc., 63 Oil Colors Gasoline Colors, 63 "Harrison" Oil Colors, 37 Oil Colors, 56 Oil of Mirbane (See Nitrobenzene), 17 "Oil-Tight" Cartridges, 82 Oleum (Fuming Sulfuric Acid), 46 Oleyl Alcohol (See "Ocenol"), 59 "Ondal" Oxidizing Agent, 58 "Orel" Rubber Lubricant, 31 Organic Isocyanates (See "Hylene"), 3 "Orion" Acrylic Fiber, 84 "Ortholeum" Lubricant Assistant, 63 "Ortholeum" Grease Stabilizer, 63 "Ovalite" Enamel Undercoat (See "Dulux" "Ovalite"), 35 Overglaze Colors, 6 N-Oxalyl-m-phenylenediamine Tech. N-Oxaly1-p-phenylenediamine Tech. Oxides "Auric" (See Pigment Colors), 70 Calcined (See Pigments), 7 Ferric (See Iron Oxide), 17 Glaze Stains, 7 Iron, 17 Tetramethylene, THF (See Tetrahydrofuran), 10 Oxidizing Agents (See also Bleaching Agents) "Albone", 10 ' Calcium Peroxide, 10 "Darsil", 9 Hydrogen Peroxide, 10 "Ondal", 58 "Oxone", 11 "Perdox", 11 Potassium Permanganate, 46 "Sitol", 58 Sodium Bichromate, 47 Sodium Nitrate, 47 Sodium Peroxide (See "Solozone"), 11 Zinc Peroxide, 11 6-Oxo-6H-anthr(9,l)isothiazole-3-carboxylic acid Tech. l-(7-Oxo-7H-benz(de)anthracen-3-ylamino) anthraquinone Tech. l,l'-(7-Oxo-7H-benz(de)anthracen-3,9-ylenediimino) dianthraquinone Tech. `Oxone" Monopersulfate Compound, 11 p Packaging, Materials for (Seealso Adhesives) Acetate Film, 3 8 "Alathon", 75 Cellophane, 38 "Cel-O-Seal", 39 "Mylar", 39 "Wind-O-Band", 39 Packings, Materials for (See "Fairprene") Paints (See also Enamels, Lacquers, and Varnishes) Acid and Fume Resistant, 33 Aluminum, 33 Automotive Refinish, 25 "Dulux" Ready-to-Mix, 33 Heat Resistant, 33 Industrial, 27 Phenolic Aluminum, 33 Ready-Mixed, 33 Barn and Roof, 36 "Dulux" Enamel and Paint Type Pigmented Finishes, 28 "Dulux" Marine, 36 "Dulux" Metal Protective, 36, 37 "Dulux" Stucco, Shake and Shingle, 36 "Dulux" Tank, 36 "Dulux" Transmission Tower, 36 "Dulux" Trim and Shutter, 36 Flat Black, 37 Flat Wall, 35 "FIow-Kote" Rubber Base, 35 "40" Outside White House Paints, 36 Heat Resistant Stack, 37 No. 20 Acid Resistant, 33 Sash and Screen, 35 Sign Finishes, 29 "Speed-Easy" Flat Wall, 35 Stippling Flat, 35 Traffic, 37 "Trutint" House Paint, 36 Undercoats, 34 Vinyl Masonry, 36 Palladiums, 7 Paper, Adhesives for, 41,48 Coatings for "Alathon", 75 "Elvacet", 12 "Elvanol", 12 "Ludox", 45 "Quilon", 46 Dyes for "Halopont", 55 "Monastral", 55, 70 Paper Whites, 56 "Ponsol", 56 "Rotalin", 56 Flame Retardants for, 42, 43,49 (See "CM", 44 and "X-12" 49) ' Lacquers, 29 Mordant for, 56 Photographic, 67, 68 107 1 ; : j : : j i 1 j ; j i ! DUP210010738 PRODUCTS Paper (Continued) Sizes Aluminum Sulfate, 42 "Elvanol", 12 ' "Quilon", 46 Treating Agents Urea, 74 Paper Machine Aprons, Fabric for (See "Fabrikoid"), 20 Paper Stock and Rags, 83 Paper Whites, 56 "Paramount" and "Park Avenue" Toothbrushes, 77 Partition Enclosures, Fabric for (See "Fabrilite"), 19 "Parzate" Fungicides, 50 "Patterson" Screens, 66 Pelletols, 16 Pentaerythrite Tetranitrate (PETN), 18 Peptizers Neoprene (See "552"), 1 Rubber, 3 "Perclene" Perchlorethylene, 8 "Perdox" Sodium Borate Perhydrate, 11 Perforators, Jet (See Jet Perforators), 17 Peri Acid Tech. "Permalux" Neoprene Accelerator and Rubber Antioxidant, 1, 2 Permissible Explosives, 15 Peroxides, 10, 11 Peters Ammunition, 81, 82 PETN (See Pentaerythrite Tetranitrate), 18 Petroleum Chemicals, 62 "Petrowet" Saturated Hydrocarbon Sodium Sulfonate, 57 "Petrowet" Fatty Alcohol Sodium Sulfate, 57 p-Phenetidine Tech. Phenothiazine, 46 1 -Phenyl-3 -methyl-5-pyrazolone Tech. Phenyl-alpha-naphthylamine (See also phenyl-beta- naphthylamine), 63 N-Phenyl-alpha-naphthylamine Tech. N-Phenyl-beta-naphthylamine Tech. N-Phenyl Gamma Acid Tech. N-Phenyl J Acid Tech. N-Phenyl Peri Acid Tech. 2,2'-Phenyliminodiethanol Tech. m-Phenylenediamine Tech. l,3-Phenylenediamine-4-sulfonic acid Tech. Phosphates, 47 Phosphorescent Chemicals, 69 Phosphoric Acid, 46 Phosphors, 69 Photo Copy Papers, 67 Photographic Chemicals (See Tested Chemical Preparations), 69 (See also X-ray Film Processing Chemicals), 66 Photographic Films (See Films), 66, 67 Photographic Papers, 66, 67, 68, 69 Photographic Sponge, 69 "Photo-Writ" Photocopy Paper, 67 Phthalimide Tech. Pickling Agents (See Metal Descaling, Pickling, "Nogas") Picric acid Tech. Pigment Colors, 70 Pigments (See also Colors, Dyes) Ceramic, 6 "Dalamar" Azo Yellow, 70 "Duol" Pigments, 70 Enamel, 6 "Monastral" Pigments. 71 "Naphthanil" Pigments, 71 Pigment Colors, 70 "Ramapo" Pigments, 71 Titanium Pigments, 71 "Watchung" Pigments, 71 Pipe, Valves and Fittings, 83 Piperidine Tech. Plastic Coated Fabrics (See "Fabrilite", "Armalon", "Lecton"), 19, 20 Plastic Filters for Use with "Varigam", "Varilour", 68 Plasticizers Neoprene (See "552"), 1 Rubber, 3 Plastics "Alathon", 75 "Butacite", 75 "Delrin", 75 "Elvacet", 12 "Elvanol", 12 "Lucite", 75, 76 Nylon "Tynex", 76 "Zytel", 77 "Rulan", 76 "Teflon", 76 Plating Agents (See Electroplating Products), 8 Pocketbooks, Materials for (See "Fabrilite"), 19 "Police Match" Ammunition Polishes Chrome and Metal Polish, 30 "Duco" Polishing or Rubbing Compound, 22 "7" Polish, 31 "Polyac" Butyl Rubber Conditioner, 3 Polyester Fiber (See "Dacron"), 84 Polyester Film (See "Mylar"), 39 Polyester Photographic Film and Film Base (See "Cronar"), 65 Polyethylene Resins (See "Alathon"), 75 Polysulfide, 9 ,,- Polyvinyl Acetal Resin (See "Butacite"), 73 Polyvinyl Acetate (See "Elvacet"), 12 Polyvinyl Alcohol (See "Elvanol"), 12 "Ponsol" Dyes, 56 "Pontachrome" Dyes, 56 "Pontacyl" Dyes, 56 "Pontamine" Developers, Dyes, 56 Porcelain for Aluminum, 6 Potash Alum (See Aluminum Potassium Sulfate), 42 Potash, Caustic (See Potassium Hydroxide), 46 Potash, Muriate of (See Potassium Chloride), 46 Potassium DUP210010739 PRODUCTS Potassium fContinued) -- Aluminum Sulfate (See Aluminum Potassium Sulfate), 42 -- Chloride, 46 -- Cyanide, 11 -- Hydroxide, 46 -- Metal, 11 -- Nitrate U.S.P. Double Refined. 46 -- Permanganate, 46 -- Silicates, 46 -- Titanate, Fibrous, 71 Poultry Feed Ingredients (See Methionine), 52 Powders Aluminum (See also Aluminum Paste), 27 Black Sporting, 15 Blasting, 15 Loggers', 15 Molding (See Plastics) Pellet, 15 Rifle (See Smokeless Powders), 18 Shotgun (See Smokeless Powders), 18 Silver, 6 "Power Guide" Retainer Disc for Studs (See Studs for Construction Fastening), 80 Power Supplies, 83 "Prep-Sol" Solvent, 26 Preservatives, Wood Chromated Zinc Chloride, 43 Industrial Fungicide, IN-2555, 44 Zinc Chloride, 49 "Primacord" Detonating Fuse, Connectors, 14 Primers (See also Blasting Caps), 16 Primers (for Finishes) (See also Primer-Surfacers), 29 "Antoxide" Metal, 36 Black Dipping, 22 Clear Wood, 25 "Duco" Lacquer, 28 "Duco" Metal, 34 "Dulux" Clear Wood, 36 "Dulux" Galvanized Metal, 36 "Dulux" High Bake, 29 "Dulux" Metal Protective, 36 "Dulux" Zinc Chromate, 37 Flash, 22 Industrial, 29 Masonry Block, 36 Metal, 22 Non-Sanding, 25 One-Bake Type (See Flash Primer), 22 "Preparakote" Primer-Surfacer, 25 Pyroxylin (See Metal Primer, Pyroxylin Type), 22 Sealer-Coater, 35 Spangled Galvanized, 26 Sub-Marine Metal, 37 39 Wood Primer White, 36 Wood, 22 Zinc Chromate, 26 Primer-Sealer, 35 (See also Make-Ready Lacquer Primer-Sealer), 26 Primer-Surfacers (See also Primers), 22, 23, 36 Priming, "Kleanbore", 79 Priming, "Rustless", 81 Primuline Fusion Mass 220 Tech. Primuline Fusion Mass 240 Tech. Primuline Fusion Mass 270 Tech. Propellents Aerosol (See "Freon"), 60, 61 (See also Methyl Chloride and Methylene Chloride), 7, 8 "Pro-Tek" Protective Hand Cream, 31 Putties, 23, 29 "PX" Book Cloth, 19 "Pyrocore" Ignition Detonating Cord, 18 Pyrotechnics, Chemicals for (See Strontium Nitrate and Sulfur), 48 Pyroxylin (See Nitrocellulose), 17 Pyroxylin Cements, 27 Pyroxylin Coated Materials, 19, 20 Pyroxylin Solutions, 29 "Quilon" Chrome Complex, 46 Quinaldine Tech. Quinizarin Tech. 2,4-Quinolinediol Tech. Quinophthalone Tech. 2 R Acid Tech. Racquet Strings, Nylon (See "Tynex"), 76 Radiator Cleaner (See Cooling System Cleanser and Fast Flush), 30, 31 Radiographic Products, 65 Radiographic Screens (See Screens for Miniature Radiography), 66 Rags (See Paper Stock and Rags), 83 "Ramapo" Pigments, 71 "Rangemaster" Rifle, 79 Rayon Fiber, 84 Rayon Yarns, 84 Reagents, Laboratory (See Laboratory Reagents) Reclaiming Chemical (See RR-10), 3 "Red Cross" Dynamites, 16 Refrigerants "Artie", 7 "Freon", 60 Methyl Chloride, 7 Methylene Chloride, 8 Remington Ammunition, 79, 80, 81, 82 Remington Industrial Tools, 80 Remington Rifles, 78 Remington Shotguns, 78 Remington Stud Drivers, 80 Remington Stunner, 81 Remington Target Thrower, 80 Remington Traps and Targets, 80 Remover, Bug (See Bug Remover), 30 Remover, Carbonate (See Carbonate Remover), 8 Remover, Paint (See Methylene Chloride), 8 109 DUP210010740 PRODUCTS Remover, Tar and Road Oil (See "Dissolvo"), 30 Residues and Sludges, 83 Resin Dispersions "Methacrol" Resin Dispersions, 58 "Teflon" (Aqueous Dispersion), 76 "Zenoton", 59 "Zoron", 59 Resin Sheet Stocks "Butacite" Polyvinyl Butyral Resin, 75 Resins (See also Plastics) "Alathon", 75 "Butacite", 75 "Dulux" Foam Resin, 22, 28 "Elvacet", 12 "Elvanol", 12 "Lucite", 75 Polyester (See "Dulux" Foam Resin), 22, 28 "Teflon", 76 "Tynex", 76 "Zytel", 76 Retarder LAN Surface Active Agent, 58 Retarder Thinner for "Duco", "Lucite" Lacquers, 26 Retarder W, 3 Retarders, 23 Retarding Agents (See Textile Specialties), 57 Revolver and Rifle Cartridges, 79, 80, 81, 82 Rhoduline Acid Technical Rifle Powders, 18 Rifles (See Remington Rifles), 78 Riveting Iron Tips, 18 Riveting Irons, 18 Rivets (See Du Pont Aircraft and Industrial Rivets), 18 "Roracyl" Dyes, 56 Rose Insecticide and Fungicide, 53 Rose Spray-Duster, 53 "Rotalin" Dyes, 56 RPA Rubber Peptizing Agents, 3 RR-10 Reclaiming Chemical, 3 Rubber and Synthetic Rubber Coated Materials (See "Fairprene"), 20 Rubber Chemicals (See also Antioxidants, Accelerators, and Colors) "Aquarex" Surface Active or Mold Release Agents, 2 Copper Inhibitor X-872-L, 3 ELA Elastomer Lubricating Agent, 3 "Endor" Peptizing Agent, 3 "Heliozone", 3 "Hylene", 3 "Ludox" Colloidal Silica, 45 "Moca" Curing Agent, 3 NBC Sun Inhibitor, 3 Retarder W, 3 RPA Rubber Peptizing Agents, 3 RR-10 Reclaiming Chemical, 3 Sodium Dimethyl Dithiocarbamate, 47 "Unicel" Blowing Agents, 4 Rubber Dispersed Colors, 4 Rubber Dressing, 31 Rubber Finish (See "Rubbertone"), 26 Rubber Lubricant (See "Orel"), 31 Rubbers, Synthetic, 4 "Rubbertone" Rubber Finish, 26 Rubbing Compounds Automotive Refinish, 26 "Duco" Polishing or Rubbing Compound, 22 "7" Rubbing Compound, 31 "Rug Anchor" Rug Underlay, 20 Rug Cushion (See "Velvetex"), 20 "Rulan" Flame-Retardant Plastic, 76 Rust Inhibitor (See Acid and Rust Inhibitor), 30 Rust Preventive (See Fuel Oil Additive No. 2), 62 Rust Remover (See "Duclean" No. 2), 43 "Rustless" Priming (See Peters Ammunition), 81, 82 Rutile (See "Ti-Cal", "Ti-Pure"), 71 S Saddles, Bicycle--Fabrics for (See "Fabrilite"), 19 Safelight (See S-55X Safelight), 69 Safety Films (See Films), 64, 65, 66, 67, 68 Sal Ammoniac (See Ammonium Chloride), 42 Salt Cake, 46 Saltpeter (See Potassium Nitrate), 46 Saltpeter, Chile (See Sodium Nitrate), 47 Sarcosine Tech. Scatter Loads (See "Shur Shot"), 79 "Scoremaster" Rifle, 79 Screen Process Film, 67 Screens, Radiographic, 66 Sealers All Purpose, 30 Automotive Bleederseal Sealer for Bleeding Colors, 26 Clear Windshield Sealer, 30 Cooling System, 30 "Duco" Clear Sealer, 26 Engenamel, 28 Furniture Lacquer, 28 Heavy Duty Sealer, 31 Make-Ready Lacquer Primer-Sealer, 26 Penetrating Wood Finish, 37 Primer-Sealer, 35 Sealer-Coater, 35 Windshield (See Clear Windshield Sealer), 39 Wood Sealer, 22 Seals, "Wind-O-Band", 39 Seam Sealants (See "Fairprene"), 20 Sectioning Switch, 14 Seed Disinfectants "Arasan" Seed Disinfectants and Protectants, 51 "Delsan" Seed Protectant, 52 Formaldehyde Solution, 9 "Semesan" Seed Disinfectants, 52 "Seismex" Dynamites, 16 "Seismogel" Gelatin, 16 Seismograph Products, 14 "7" Polish, Rubbing Compound, etc., 31 DUP210010741 PRODUCTS "Sevron" Dyes, 56 Sheet Stocks "Butacite", 75 "Fairprene", 20 Shells, Industrial, 81 "Shirlan" Industrial Fungicide, 58 Shotgun Shells, 79, 80, 81, 82 Shotguns, Remington, 78 "Shur Shot" Scatter Loads, Shotgun Shells, etc., 79 . Silica, Colloidal (See "Ludox"), 45 Silicon, Hyperpure, 71 Silicone Coated Materials, 20 Silver Coatings (See Conductive Silver Coatings), 6 Silver Powder, 6 "Sitol" Flakes Oxidizing Agent, 58 Sizes Decalcomania (See "Dulux" Clear Exterior Finish), 28 Paper Aluminum Sulfate, 42 Polyvinyl Alcohol (See "Elvanol"), 12 "Quilon", 46 Sodium CMC, 18 Textile "Lucite", 75 Polyvinyl Acetate (See "Elvacet"), 12 Polyvinyl Alcohol (See "Elvanol"), 12 Skeet Loads, Outfits, etc., 79, 80 Sludges (See Residues and Sludges), 83 Slugs, Rifled, 79, 81 Smokeless Powders, 18 Soap Boxes (See Toiletries), 77 Soda Ash, 46, 47 Soda, Calcined, 47 Soda Niter (See Sodium Nitrate), 47 Sodium -- Acetate, 46 -- Acid Fluoride, 47 -- Alkyl Sulfonate (See "Aquarex"), 2 -- Bicarbonate, 47 -- Bisulfate, 47 -- Bisulfite, 47 -- Borate Perhydrate (See "Perdox"), 11 -- Borate (See Borax), 42 -- Carbonate, 47 -- Carboxymethyl Cellulose (See Sodium CMC), 18 -- Copper Cyanide Double Salt, 9 -- Cyanide, 11 -- Cyclamate (See "Cylan"), 50 -- Dichromate (See Sodium Bichromate), 47 -- Dimethyl Dithiocarbamate, 47 -- Fluosilicatc (See Sodium Silicolluoride), 48 -- Hydrate (See Sodium Hydroxide), 47 -- Hydrosulfite (See Hydrosulfite Concentrated), 56 Sodium (Continued) -- Hydroxide, 47 -- Hyposulfite (See Sodium Thiosulfate), 48 -- Lauryl Sulfate (See "Duponol"), 57 -- MBT, 59 -- Mercaptobenzothiazole (See Sodium MBT), 59 -- Metabisulfite, 47 -- Metal, 11 -- Metanilate--Tech. -- Metasilicate, 47 -- Monoxide, 12 -- Naphthionate--Tech. -- Nitrate, 47 -- Nitrite, 18 -- Perborate, 11 -- Peroxide, 11 -- Phosphates, 47 -- Picramate--Tech. -- Propionate (See "Mycoban", "Impedex"), 73, 74 -- Silicates, 48 -- Silicofluoride, 48 -- Stannate, 9 -- Sulfate, Salt Cake, etc., 46, 48 -- Sulfide, 48 -- Sulfite, 48 -- Sulfocyanate (See Sodium Sulfocyanide), 12 -- Sulfonate (See "Petrowet"), 57 -- Sulfuret (See Polysulfide), 9 -- Tetraborate (See Borax), 42 -- Thiocyanate (See Sodium Sulfocyanide), 12 -- Thiosulfate, 48 Softeners, Textile Processing (See Textile Specialties), 57 Soil Compound (See "NC"), 45 Soil Fumigant (See VPM), 51 Soldering Flux (See Flux, Soldering), 44 "Solozone" Sodium Peroxide, 11 Solvents (See also Thinners) Anisole, 42 Chloroform, 7 Cyclohexanol (See "Hexalin"), 73 Cyclohexanone (See "Hytrol"), 73 "Decalin", 59 Dimethyl Formamide (See DMF), 43 Dry-Clean (Spot Remover), 30 Dry Cleaning, 8 Formamide, 73 "Freon" Solvents, 61 "Hexalin", 73 "Hydraphtal", 59 "Hytrol", 73 Lacquer Removing Solvent, 26 "Lucite" Solvent (See Retarders), 23 "Merpentine", 58 "Merpol", 58 Metal Degreasing, 8 Methanol, 73 Methyl Chloride, 8 Methyl Formate, 73 Methylene Chloride, 8 111 DUP210010742 PRODUCTS Solvents (See also Thinners) (Continued) Nitrobenzene, 17 Perchlorethylene, 8 "Prep-Sol", 26 Retarders, 23, 29 Tar Remover (See "Dissolvo"), 30 Tetrachloroethane, 8 Tetrahydrofuran, 10 "Tetralin", 58 Thinners, 29 Trichlorethylene, 8 Sound Recording Films, 64, 65 "Spatter-Less" Cartridges, 79 Specialties, Experimental Lots, etc., 83 "Speed-Easy" Paint, 35 "Speedmaster" Rifles, 78 Speedy Cleaner, 31 Spinning Line (See "Stren"), 76 Sponges, Cellulose (See also "Combo"), 30, 39, 69 Sponge Yarn, 40 "Sportsmaster" Rifles and Shotguns, 78 "Sportsman" Shotguns, 78 Spot Remover, 30 Spray Adjuvant, 54 Spray Glaze and Cleaner, 31 Sprayer, Garden Hose, 54 Sprays, Agricultural, 52, 53 Spreader Loads (See "Victor"), 81 Spreader-Sticker, 53 Squeegee Oils (See Squeegee Media), 7 Stainless Steel, 83 Stains Body, 7 Furniture (See Furniture Finishes), 25 Glaze, 7 Oil, 37 Penetrating (See Shingle Stain), 37 Pottery Body, 7 Shingle, 37 "Tufcote" Varnish Stain, 37 Wood (See Stains, Wood), 29 Stannous Chloride, 48 Staple Fibers, 84 Stearyl Alcohol (See "Lorol" 28), 73 Steel Products, 83 Steel, Stainless (See Stainless Steel), 83 "Stren" Spinning Line, 76 "Stripkolex" Dynamite, 16 Strontium Nitrate, 48 Stud Drivers, Power Loads, Studs, etc., 80 Stunner, Humane, 81 "Sulfanthrene" Dyes, 56 Sulfates (See Individual Chemicals, Alphabetically) Sulfide of Soda, 48 Sulfide Resistant Glass Colors (See Glass Enamels), 6 Sulfides (See Individual Chemicals, Alphabetically) 0-(p-Sulfobenzoyl)benzoic acid, disodium salt Tech. 1- (p-Sulfophenyl)-3-methyl-5-pyrazolone Tech. "Sulfogene" Dyes, 56 "Sulforon" Wettable Sulfurs, 50 Sulfur, 48, 50 Sulfuric Acid (Sec Acids) "Super Cordura" Yarn (See Rayon Fiber), 84 "Superior" Photographic Films, 64, 68 Surface Active Agents (See also Textile Processing Agents) "Alkanol" Surface Active Agents, 56, 57 "Aquarex" Surface Active or Mold Release Agents, 2 "Avitex", 57 ' "Duponol" Surface Active Agents, 57, 58, 59 "Elvanol", 12 "Merpentine", 58 "Merpol", 58 "Neomerpin", 58 "Petrowet", 57 Product BCO, 58 Retarder LAN, 58 "Zelcon", 59 Synthetic Resin Coated Fabrics, Laminates and Felts, 20 Synthetic Resins (See Resins) Synthetic Rubbers, 1, 2, 4 T Table Mats and Pads, Fabrics for (See "Fabrikoid"), 20 Tamping Bags, 14 Tanning Agents (See Leather Processing Agents) Tapes "Armalon", 20 , Protective and Waterstop (See "Fairprene"), 20 Tar Remover (See "Dissolvo"), 30 "Target" Cartridges, 82 Target Loads, 81 Target Thrower, 80 "Targetmaster" Cartridges, 80 "Targetmaster" Rifle, 79 Targets, 80 "Teflon" FEP Fluorocarbon Film, 39 "Teflon" Fiber, 84 "Teflon" TFE-Fluorocarbon Resins, 76 "Teflon" Resin Finishes, 29 "Teflon" Wire Enamels, 29 "Telvar" Weed Killers, 51 "Tepidone" Rubber Accelerator, 1 "Tersan" Fungicide, 52 Tested Chemical Preparations, 68, 69 DUP210010743 PRODUCTS i ,4,5,8-Tetrachloroanthraquinone Tech. Petrachloroethylene (See Perchlorethylene), 8 Tetraethyl Lead Compounds, 63 Tetraethylthiuram Disulfide--Tech. Tetrafluoroethylene Fiber Felt (See "Armalon"), 20 Tetrafluoroethylene Resins (See also TFE-Fluorocarbon Resins), 76 ' "Teflon" Finishes, 29 "Teflon" Wire Enamels (See Wire Enamels), 29 Tetrahydrofuran (Tetramethylene Oxide), 10 Tetrahydronaphthalene (See "Tetralin"), 58 Tetrahydronaphthalene Sodium Sulfonate (See "Alkanol"), 56 1,4,5,8-Tetrakis( 1 -anthraquinonylamino)anthraquinone Tech. "Tetralin" Solvent, 58 "Tetrone" Rubber Accelerator, 1 Textile Fibers (See Staple Fibers, Yarns), 84 Textile Processing Agents (See also Bleaching Agents, Dyes and Dyeing Auxiliaries) "Albone" Hydrogen Peroxide, 10 "Alkanol" Surface Active Agents, 56, 57 Ammonium Hydroxide--26, 42 "Aridex" Water Repellents, 57, 59 "Avitex" Antistatic Developer, Softeners, etc., 57, 58 "Avitone" Softeners, 58 "CM" Flame Retardant, 43 "Decalin" Solvent, 59 "Duponol" Surface Active Agents, 57 "Elvacet" Emulsions, Solutions, 12 "Elvanol" Polyvinyl Alcohol, 12 Formic Acid, 44 "Hexalin" Cyclohexanol, 73 "Hydraphtal", 58 Hydrochloric Acid, 44 Lactic Acid, 44 "Lucite", 75 "Ludox", 45 "Merpentine", 58 "Merpol" Surface Active Agents, 58 "Methacrol" Resin Dispersions, Lubricants, etc., 58 "Neomerpin", 58 "Ondal", 58 Perchlorethylene, 8 Potassium Hydroxide, 46 Product BCO, 58 Retarder LAN, 58 "Shirlan" Industrial Fungicides, 58 "Sitol" Oxidizing Agent, 58 Sodium Bicarbonate, 47 Sodium CMC, 18 -- Hydroxide, 47 -- Perborate, II -- Peroxide, 11 -- Pyrophosphate, 47 -- Silicate Solution, 48 -- Sulfate, 48 -- Sulfide, 48 -- Tripolyphosphate, 48 Textile Processing Agents (Continued) "Solozone", 11 Spinning Lubricant L, 58 Sulfamic Acid, 48 Sulfuric Acid, 49 "Tetralin", 58 Trichlorethylene, 8 Urea, 74 "Zeian", 58 "Zelcon", 59 "Zelec", 59 "Zenoton", 59 "Zeset", 59 "Zoron", 57 Textile Specialties, 57 Textile Yarns (See Yarns), 84 "Thermoflex" A Rubber Antioxidant, 2 Thinners, 29 Ceramic (See Mediums and Thinners), 7 "Duco" Thinner, 25 "Dulux" No. 200 Thinner, 37 "Dulux" 27 Odorless Thinner, 37 For Precious Metal Preparations, 7 Industrial, 29 "Lucite" Thinner (See Retarders), 23 Retarder Thinner for "Duco" Lacquers, 26 Retarders, 29 Thinners, 23 3,3'-Thiodi(7H-benz[de]anthracen-7-one) Tech. Thio-beta-naphthol Tech. "Thionex" Rubber Accelerator, 1 Thiram Fungicides, Protectants, Seed Disinfectants, 51, 52 Thiurams, 1 "Thunderbolt" Cartridges, 82 "Thylate" Fungicide, 51 "Ti-Cal" Pigment Rutile, 71 "Ti-Pure" Titanium Dioxides, 71 Tin Crystals (See Stannous Chloride), 48 Tin Plating Process, 9 Tire Black (See Liquid Tire Black), 31 Tire Cleaner, White Wall, 31 Titanium Metal, 71 TMA HCL, 49 Toiletries, 77 o-Tolidine base Tech. o-Tolidine hydrochloride Tech. m-Toluidine Tech. o-Toluidine Tech. p-Toluidine Tech. Toluidines Mixed o-m-p Tech. o-(p-Toluyl)benzoic acid Tech. 2.4-Tolylenediamine Tech. 2.4-Tolylenediamine-5-sulfonic acid Tech. Tomato Dust, 53 113 DUP210010744 PRODUCTS "Tontine" Vinyl Coated Fabrics, 19 "Tontine" Shade Cloth, 20 Tools, Construction (See Construction Tools and Materials), 83 Tools, Industrial (See Remington Industrial Tools), 80 Toothbrush Holders (See Toiletries), 77 Toothbrushes, 77 "Town & Country" Flat White Enamel, 35 Trace Elements (See Ferro FTE), 53 Trap Loads ("Victor"), 81 Traps, 80 Trichloromonofluoromethane (See "Freon-11"), 60 Trichlorotrifluoroethane (See "Freon-113"), 61 "Triclene" Trichlorethylene, 8 1,3,5-Triethylbenzene Tech. Trimethylamine, 49 1,3,3 -TrimethylA2' "-indolineacetaldehyde Tech. l,3,3-Trimethyl-2-methyleneindoline Tech. "Tryben" Weed Killer, 51 T.S.P. (See Sodium Phosphate--Tri), 47 "Tufcote" Furniture Lacquer Sealers, etc., 28, 35, 37 "Turtleback" Car Washing Sponge, 40 "Two-Sixty-Two" Feed Compound, 74 "Tynex" Nylon Bristles, Filament, 76 U UAL-A,-B,-C,-37 (See "Uramon"), 74 Undercoats (See also Primers, Sealers), 29, 34, 35 Underglaze Pigments, 7 "Unicel" Blowing Agents, 3, 18 Upholstery Cleaner, Car, 30 Upholstery, Fabrics for (See "Fabrilite"), 19 "Uramite" Fertilizer Compound, 74 "Uramon" Ammonia Liquors, 74 Urea, 74 Urethane Rubber (See "Adiprene"), 4 Urethanes, Isocyanates (See "Hylene"), 3 Urethanes, Polyester Resin (See "Dulux" Foam Resin), 22, 28 Urotropine (See Hexamethylenetetramine), 10 V Valves (See Pipe, Valves and Fittings), 83 "Vantasol" Dyes, 56 Vapor Degreasing Compounds, 8 "Varigam" Variable Contrast Photographic Paper, 68 "Varilour" Variable Contrast Photographic Paper, 68 Varnishes (See also Enamels, Lacquers, and Paints) Aluminum Mixing Vehicles, 25 Chassis Blacks, 25 Clears, 29 Bronzing Liquid, 21 "Duco" Clear Finish, 34 Implement Finishes, 28 Metal, 21 Super Clear Varnish, 37 Wood, 21 114 Varnishes (Continued) "Dulux" Exterior Spar Varnish (See also "Dulux" Marine Finishes), 36, 37 "Dulux" Interior, 37 "Dulux" Satin Sheen, 37 Exterior Spar, 37 Floor and Trim, 37 Furniture, Clear and Flat, 28 Implement, Clear, 28 Industrial, 29 Insulating, 28 Penetrating Wood Finish, 37 Super Clear, 37 Tin Decorating Finishes, 29 "Tufcote" Varnish Stain, 37 Vegetable Garden Dust, 53 "Velour Black" Photographic Paper, 68 "Velvetex" Sponge Rubber Rug Cushion, 20 Vermifuges Perchlorethylene, 8 Phenothiazine, 52 "Victor" Shotgun Shells, Loads, etc., 81 Vinyl Acetate, Monomer, 12 Vinyl Alcohol, Polymerized (See "Elvanol"), 12 Vinyl Coated Fabrics (See "Fabrilite","Tontine"), 19, 20 Vinyl Drapery Material (See "Tontine"), 20 Vinyl Materials (See "Fabrilite", "PX" Book Cloth), 20 Violanthrone Tech. "Viton" Synthetic Rubbers, 5 "Volan" Methacrylato Chromic Chloride, 49 VPM Soil Fumigant, 51 Vulcanization Retarder (See Retarder W), 3 W Wall Coverings, Fabrics for (See "Fabrilite"), 19 Warmtone Photographic Projection Paper, 69 "Watchung" Red Pigments, 71 ' Water Dispersible Colors, 70, 71 Water Glass (See Sodium Silicate), 48 Water Pump Lubricant, 30 Water Repellents "Aridex", 59 "Nalan", 58 "Quilon", 46 "Zelan", 59 Waterproof Cements, 27 Waxes, Auto, New Car, 30, 31 . Weed Killers (See also Brush Killers), 51, 54 Welts, Fabrics for (See "Fabrikoid"), 20 Wetting Agents (See Surface Active Agents), 56 (See also Textile Specialties), 57 Whites (See "Pontamine" Whites), 56 Whites, Paper (See Paper Whites), 56 "Wind-O-Band" Cellulose Seals (See also "Cel-O-Seal"), 39 Window Shade Material (See "Tontine"), 20 DUP210010745 PRODUCTS Windshield Washer Fluid, 31 "Wingmaster" Shotgun, 78 Wire Enamels, 29 "Wonder" Skeet Outfits, 80 Wood Alcohol (See Methanol), 73 Wood Fillers, 28 "Dulux" Paste Filler, 23 Paste Wood Filler, 37 Wood Primers, Sealers, Stains (See Primers, Sealers, Stains), 21, 29, 36 "Woodsmaster" Rifle, 78 "X-12" Flame Retardant, 49 "X-F" Pan Photographic Film, 68 X-ray Film Processing Chemicals, 66 "Xtra-Fast" Film, Type 508, 65 2.4-Xylidine Tech. 2.5-XyIidine Tech. Xylidines Mixed o-m-p Tech. Yarns Cellulose Sponge, 40 Textile, 84 "Zalba" Rubber Antioxidant, 2 "Zelan" Water Repellents, 59 "Zelcon" Fabric Conditioner, 59 "Zelec" Antistatic Agents, 59 "Zenite" Rubber Accelerators, 2 "Zenoton" Resin Finish, 59 "Zerex" Anti-Rust Anti-Freeze, 74 "Zerlate" Ziram Fungicide, 51 "Zerone" Anti-Rust Anti-Freeze, 74 "Zeset" Fabric Stabilizer, 59 Zinc Ammonium Chloride, -- Chloride, 49 --. Chromate, 70 -- Cyanide, 9 -- Peroxide, 11 -- Plating Products, 9 -- Silicate Phosphors (See Luminescent Chemical Products), 69 -- Stearate, 49 -- Sulfide (See Luminescent Chemical Products), 69 "Zin-O-Lyte" Brightener, Salts, 9 "Zin-O-Lyte" Emergency Formulation, 9 "Zobar" Weed Killer, 51 "Zoron" Polymer Emulsion, 59 "Zoron" Resin Finish, 59 "Zytel" Nylon Resins, 77 DUP210010746 PRODUCTS Notes i DUP210010747 DUP210010748 INDUSTRIES SECTION Du Font Products--Classified by industry h is s e c t io n provides the customer with a quick, handy Treference to the Du Pont products and developments that are currently available for his industry. A brief description or outline of uses is given in each case. Fur ther information, particularly for the newer chemicals, Common Industrial Chemicals...........Alphabetical Section (individually) Ammonium Hydroxide, Anhydrous Ammonia, Borax, Nitric Acid, Hydrochloric Acid (Muri atic), Methyl Alcohol, Sulfuric Acid, etc. about special properties, possible applications, handling, Dyes (See alsoColors and Pigments).......................... 55-56 etc., may be obtained by a call or letter to the nearest office of the Department which manufactures or sells the Explosives....................................................................15-16 Finishes............................................................................ 102 g specific product. Address and telephone numbers are Paints, Varnishes, Lacquers. ij listed in each Departmental Section (White pages) and r in the Blue Section at the end of this book. Packaging and Industrial Films.......................................107 Acetate Film, Cellophane, "Cel-O-Seal" Cellu VI iii Du Pont products that can be classified in groups, e.g., lose Bands, "Wind-O-Band" Cellulose Seals, bleaching agents, fungicides, heat treating compounds, "Mylar" Polyester Film, etc. solvents, textile processing agents, rubber chemicals and others have not been listed individually but referred to as a specific group in the Yellow Section, where the individ ual members may be located. For example, under the heading, Tanning Industry, on page 138 of the Pink Sec tion, the reference "Leather Processing Agents" . . . p. 104 is given, rather than a list of each of the 31 items that belong to that group. Plastics............................................................................ 108 A complete detailing of these uses would be impossible but brief indications have been given (pp. 134-136). Questions on specific problems are welcomed by the Polychemicals Dept. Propellents........................................................................ 109 The use of propellents is constantly expanding. Questions on specific problems may be sent to A number of Du Pont products are used in nearly all the appropriate manufacturing departments. industries so that there appears to be no advantage in listing these "general use" items for each industry. Refer Reagents (CP).................................. Alphabetical Section (individually) ences to these are as follows: Refrigerants.................................................................... 109 The Major Industries The classification used in this section is adapted from the Standard Industrial Classifica tion Manual of the United States Bureau of the Budget, and the various systems used over the years in the Industrial Departments of the Du Pont Company. In a sense it represents a compromise that for the purposes of this work appears to be the one most useful to Du Pont customers. Agriculture ....................................................................119 Automotive and Aviation Industries............................. 119 Chemical industry......................................................121 Electrical and Electronic Industries..................................124 Explosives and Pyrotechnics Industries ..........................125 Fabricated Metal Products Industry............................. 126 Food Industry............................................................... 127 Forest Products Industry...................................................128 Graphic Arts Industry.......................................................129 Non-metallic Mineral Products Industries.............. 129 Paint, Pigment and Varnish Industries.................. 130 Petroleum Industry.................................................131 Public and Private Utilities and Institutions .... 132 Pulp, Paper and Paper Products Industries .... 133 Rubber and Plastics Industries............................... 134 Soaps, Detergents and Allied Products Industries . . 137 Tanning Industry.................................................... 137 Textile Industry.........................................................138 118 DUP210010749 INDUSTRIES SECTION Agriculture Brush Killers........................................................................51 Yard, pasture and field maintenance. DL-Methionine................................................... Poultry feed ingredient. 52 Fertilizers.................................................................... 72, 74 Formaldehyde...................... .................................. 9, 10 Treatment of soil and seed; fungicide; bactericide; deo dorant; disinfectant; fertilizer component. "Freon" Propellents................................................... 60, 61 Propellents for aerosol products. Fungicides................................................................. 50,51 Specific control of diseases of vegetables, fruits, orna mentals, etc. Garden Products............................................................... 53 Pest control chemicals and weed killers for home gardens. Hexamethylenetetramine.................................................. 10 Treatment of citrus fruit to control spoilage in storage. "Hydan" Feed Supplement..............................................52 Methionine (essential amino acid) source for poultry, dog and livestock feeds. "Hyfrol" 0 Cyclohexanone..............................................73 Insecticides. "Impedex" Feed Supplement...........................................73 Heat and mold inhibitor. Insecticides........................................................................50 Specific control of insects attacking fruits, vegetables, live stock, etc. Intermediates for Agricultural Chemicals (See Agricultural Chemicals )..............................................95 Livestock Chemicals.......................................................... 52 Sprays; dips; etc. Methylene Chloride.............................................................7 Solvent for active ingredients of aerosol mixtures. "Mylar" Polyester Film.................................................. 39 Glazing material for greenhouses, other low cost farm construction. "NuGreen" Fertilizer Compound..................................... 73 Nitrogen fertilizer for soil and spray application to plants. "NuGreen" LB Fertilizer Compound..........................74 Nitrogen fertilizer for spray application to plants. Paraformaldehyde....................................................10 Fumigation for control of bacteria and fungi. Phenothicazine............................................................ 46 Anthelmintic for the control of internal parasites of live stock and poultry. Seed Disinfectants................................................51,52 Treating seed grains, forage, vegetable crop seeds, etc. Sodium Cyanide 96%............................................... 11 Fumigation. Trichlorefhylene................................................................. 8 Solvent for insecticides; grain fumigant. Turf Fungicides................................................................... 52 Control of diseases in turf. "Two-Sixty-Two" Feed Compound.................................74 Ingredient of feeds for ruminants. "Uramite" Fertilizer Compound..................................... 74 Nitrogen fertilizer for direct soil application, for turf grass and ornamentals. "Uramite" M Fertilizer Compound................................. 74 Ingredient for mixed fertilizer. "Uramon" Ammonia Liquors..........................................74 Nitrogen-containing ammoniating solutions for use in fer tilizer manufacture. Weed Killers................................................................ 51, 54 Selective and non-selective control of weeds on crop land, right-of-ways, and industrial sites. Automotive and Aviation Industries Acid and Rust Inhibitor...................................................... 30 Helps prevent acid and rust formation in automotive cool ing systems. "Alathon" Polyethylene Resin..........................................75 Wire insulation; spring liners. All Purpose Cement...........................................................30 Sealing glass, metal and cement. Anti-Rust and Water Pump Lubricant.............................30 Lubricates and helps prevent rust in auto cooling systems. "Armalon" TFE-Fluorocarbon Fabrics, Tapes and Laminates..........................................20 Electrical insulation. "Armalon" TFE-Fluorocarbon Resin Coated Glass Fabrics................................................................... 20 Gaskets; diaphragms; wire wrapping; ducting; bearing seals; protective covers. Auto Wax.......................................... Paste wax for auto finishes. 30 Automotive Finishes...........................................................21 Lacquers; primers; enamels; etc. Automotive Refinishing Materials................................. 25 Lacquers; primers; enamels; etc. Brake Fluid--Heavy Duty.................................................. 30 For automotive hydraulic brake systems. Bug Remover................................................................... 30 Cleaning powder for removing bug residues from car fin ishes, chromium, windshields and headlights. "Butacite" Polyvinyl Butyral Resin................................. 75 Safety glass interlayer. Car Upholstery Cleaner......................... Cleaning vinyl car upholstery. 30 Car Wash............................................................................30 Washing auto finishes. Cellulose Sponge...............................................................40 Washing cars. Chrome and Metal Polish.................................................. 30 Polishing chrome plated fittings, nickel, brass, copper and stainless steel. Cooling System Cleanser.................................................. 30 Dissolving rust, scale and grease in radiators. Commercial Methanol Anti-Freeze (C.M.A.).................... 72 Methanol base anti-freeze. Cooling System Sealer ....................................................... 30 Sealing leaks in automotive radiators and cooling systems. 119 DUP210010750 INDUSTRIES SECTION "Delrin" Acetal Resin (Molding and Extrusion Powder) 75 "Lecton" Acrylic Resin Coated Fabrics and Laminates . 20 4L Interior hardware; mechanical and electrical parts; bush ings and bearings for suspension and steering linkage, fuel Electrical insulation. Lino-Writ Recording Papers and Chemicals.................... 67 pump and carburetor parts, gears and instrument clusters. Oscillographic trace recording. "Dissolvo" (Solvent) Tar and Road Oil Remover ... 30 Removing tar, road oil and gummy substances from auto finishes. DMF Antisfall Additive...............................................43, 62 Added to gasolines to prevent engine stalling during cool, humid weather. Liquid Tire Black...............................................................31 Dressing tires, rubber mats and running boards. "Lucite" Acrylic Lacquers...................................... 22, 25 Painting or refinishing auto bodies and parts. "Lucite" Acrylic Resin (Methacrylate Polymers). ... 75 Dry Clean (Spot Remover).................................................. 30 Nonflammable cleaning fluid. "Duco" Cement............................................................... 31 All purpose transparent flexible adhesive. "Duco" Lacquer Finishes.................................. 22, 25, 28 Painting or refinishing auto bodies and parts. "Dulux" Enamel Finishes.................................................. 34 Painting or refinishing auto bodies and parts. Dyes.............................................................................55, 56 Dyeing upholstery fabrics, headlinings, carpeting. Expansion Rivets............................................................... 18 A "blind" rivet for fastening automotive and aircraft assemblies, partially or totally inaccessiblefrom the operat ing surfaces. x tuivvtltv u.wi.V70VA>3. "Lucite" Acrylic Resin (Molding Powders)........................ 75 Automotive parking lamp and tail lamp lenses, instrument panels, sun visors and decorative parts. Metal Deactivator No. 2 and No. 3.............................. 63 Improving storage stability of petroleum distillates. Methylene Chloride.............................................................7 Paint remover for continuous stripping of paints. Multi-Service Cleaner...................................................... 31 All purpose cleaning fluid for glass, vinyl and painted surfaces. "Mylar" Polyester Film..................................................39 Decorative laminates for car door paneling, etc., packag ing parts. ' "Fabrilite" Vinyl Coated Fabrics......................................19 Upholstery; trim; bindings; welts; seat covers. "Fairprene" Industrial Cements..................................... 20 Weatherstripping; trim; seam sealants. "Fairprene" P.A.W. Tape (Protective and Waferstop] 20 Seam sealant for oil-, air- and water-tight structural joints. Neoprene Synthetic Rubber................................................4 For oil-, chemical-, heat- and oxidation-resistant flexible parts. New Car Wax................................................................... 31 Combination paste wax and cleaner for use on new cars and excellent finishes. "Fairprene" Synthetic Rubber Coated Fabrics.... 20 Diaphragms; gaskets; washers; packings; seam sealants. "Fairprene" Synthetic Rubber Sheet Stocks..............20 Gaskets; washers; packings; seam sealants. Fast Flush......................................................................31 Maintenance type liquid radiator cleaner. Fibrous Potassium Titanate........................................71 Thermal insulator for temperatures to 2200 F.where lightweight, high-efficiency is needed. Foam Cleaner............................................................. 31 Cleaning upholstery. '"Freon" Refrigerants............................................... 60, 61 For automotive airconditioning. Niobium Metal................................................................... 71 Ductile metal of low thermal neutron cross-section. Base for high temperature alloys. "Orel" Rubber Lubricant.................................................. 31 Lubricating rubber shackles and other rubber parts. "Ortholeum" 300 Grease Stabilizer................................. 63 Stabilizer for greases. Perchlorefhylene................................................................. 8 Vapor degreasing metal parts in manufacture or main tenance. Phenothiazine................................................................... 46 Antioxidant for lubricating oils. Phenyl-alpha-Naphthylamine..........................................63 '"Freon" Solvents...............................................................61 Fuel Oil Additive No. 7, No. 208 and No. 212 . . .62 Added to improve storage stability of petroleum distillates. Gas Guard...................................................... . 31 Phenyl-beta-Naphfhylamine.............................................. 63 Antioxidants for greases and lubricating oils. Plating Chemicals.................................................................8 For brass, copper, cadmium, zinc and tin plating. Preventing ice formation in automotive gasoline lines. Gasoline Antioxidants............................................... 62, 63 Reducing the formation of gum and precipitation of lead. "7" Polish........................................................................31 Cleaning and polishing auto finishes. "Pro-Tek" Protective Hand Cream................................. 31 Gasoline Colors............................................................... 63 Imparting characteristic colors to gasoline. Heavy Duty Stop-Leak...................................................... 31 Protecting hands and arms against grease, paint, etc. Rubber Dressing...............................................................31 Dressing tires, rubber mats and running boards. Repairing automotive cracked cylinders, engine blocks and water jackets. Hydrogen Peroxide........................................................... 10 Rust Preventive No. 2...................................................... 62 Added to petroleum distillates to reduce rusting and engine stalling. High strength peroxide used asamonopropellantand fuel oxidant. "7" Rubbing Compound.................................................. 31 Cleaning badly weathered auto finishes. "Hypalon" Synthetic Rubber............................................4 Base for weather and ozone resistant rubber parts. Screen Process Film...........................................................67 For producing photographic stencils for silk screen printing. 120 DUP210010751 INDUSTRIES SECTION Speedy Cleaner............................................................... 31 Liquid cleaning of auto finishes. Spray Glaze........................................................................31 Polishing auto finishes. Spray Glaze Cleaner No. 1 and No. 2.............................31 Cleaning auto finishes. Surface Active Agents...................... 2, 12, 56, 57, 58, 59 Cleaning; wetting; preparation for electroplating. Teiraeiiiy! lead Compounds..............................................63 Aviation Mix; Motor Mix. Titanium Metal............................................................... 71 Structural metal and alloy ingredient wherelightness, strength and corrosion resistance are required. Trichlorethylene................................................................. 8 Vapor degreasing metal parts in manufactureor mainte nance; thinning and continuous stripping of paints. "Viton" Synthetic Rubber.................................................... 5 For use in products that must withstand aromatic fuels, hydraulic fluids and oxidizing chemicals at very high tem peratures (500F.) Waterless Hand Cleaner.................................................. 31 Removing dirt, grease, paints, oils, carbon, tar and shellac from skin. Whitewall Tire Cleaner.................................................. 31 Safe, fast cleaner for whitewall tires. Windshield Washer Fluid.................................................. 31 Detergent and anti-freeze for auto windshield washers. "Zerex" Anti-Rust Anti-Freeze......................................... 74 Ethylene glycol based anti-freeze. "Zerone" Anti-Rust Anti-Freeze..................................... 74 Methanol based anti-freeze. "Zytel" Nylon Resin (Molding and Extrusion Powders] . 76 Mechanical and electrical parts; door lock mechanisms; dome light lenses; lubrication tubing. Chemical Industry Adipic Acid........................................................................72 Ester plasticizers, alkyd resins and organic syntheses. Aluminum Ammonium Sulfate--N.F.................................41 In the manufacture of pharmaceutical and styptic products. Aluminum Ammonium Sulfate--Technical.................... 41 Color lakes; imitation marble statuary. Aluminum Chloride...........................................................41 Color lakes; roofing granules. Aluminum Potassium Sulfate--N.F....................................42 In the manufacture of pharmaceuticals. Aluminum Potassium Sulfate--Technical........................ 42 Photographic fixing and hardening chemicals. Aluminum Sulfate--Iron Free ..........................................42 Sizing and coating paper; pigments; printing inks. Ammonium Chloride...................................................... 42 Compounded galvanizing and soldering fluxes; an ingredi ent in dry batteries. Ammonium Nitrate........................................................... 17 Nitrous oxide; compounded salts for stripping copper from steel; oxiding agent. Ammonium Sulfate................................................... 42, 72 Other ammonium salts; compounded fire retardants for textiles and wood; yeast food; ammonia-chlorine disinfec tion of water. Aniline ............................................................................ 17 Intermediates. Anisole ............................................................................ 42 Solvent for organic reactions; intermediate; heat transfer medium. "Armalon" TFE-Fluorocarbon Fiber Felt.........................20 Gaskets and filtering materials. "Armalon" TFE-Fluorocarbon Resin Coated Glass Fabrics................................................................... 20 Gaskets; diaphragms; wire wrapping; ducting; bearing seals; protective covers. Barium Carbonate...........................................................42 Barium salts; optical glass, bricks (prevention of efflores cence); compounded heat treating salts; filler and pigment. Calcium Peroxide................................................................10 Preparation of pharmaceuticals; cosmetics; general oxida tion. o-Chloroaniline Intermediate for dyes and other organics. Chloroform..........................................................................7 Solvent for alkaloids, antibiotics, hormones, essential oils, and other organic compounds; dyes; fine chemicals; in manufacture of pharmaceuticals; freezing point depressant in carbon tetrachloride fluids. Chlorosulfonic Acid...........................................................43 Sulfonyl chlorides for syntheses of sulfa drugs and sac charin; sulfating and sulfonating organic compounds for dye intermediates and synthetic detergents; source of an hydrous hydrogen chloride. Copper Cyanide................................................................. 8 Dyes. Copper Sulfate................................................................... 43 Copper salts; pigments; fungicides; germicides; wood pre servative compositions; algaecide in water treatment. Copperas (Ferrous Sulfate)................................................ 43 Iron salts; Prussian blue; iron oxide pigments; indigo dyes; clarifying agent in water purification and waste disposal; boiler compounds for removal of silica. "Decalin" Solvent--Decahydronaphthalene .... 59 Solvent and intermediate. Detergents..................................................................18,47 Diatomaceous Earth...........................................................43 Anti-caking agent for ammonium nitrate, ammonium sul fate and mixed fertilizers; grinding medium for DDT, BHC, toxaphene, etc. 1,4-Dichlorobutane........................................................... 10 Organic syntheses requiring highly reactive chlorine atoms. Diglycolic Acid................................................................... 72 Organic syntheses; sequestering agent; resins, plasticizers. DMF--Dimethyl Formamide....................................... 43,62 Solvent for vinyl resins in lacquers, films and printing inks, pigments, dyes and inorganic salts; reaction medium in the pharmaceutical, dye and synthetic organic chemicals in dustries; selective refining solvent for acetylene, acid gases and petroleum constituents. 121 DUP210010752 INDUSTRIES SECTION Dimethyl Sulfate............................................................ 72 Methylating agent in manufacture of dyes, synthetic drugs, and other organic compounds. Dimethyl Terephthalate............................................... 17 Intermediate for plasticizers and organic intermediates. Dimethylamine ........................................................43, 53 Intermediate for rubber accelerators and quaternary am monium compounds; in making pharmaceuticals, herbi- vi flnritc rtrtA c<-1x74n+C "Elvacef" Polyvinyl Acetate Emulsion.......................... 12 Paint vehicle; heat seal applications; adhesives; textile fin ishes; binders. "Elvanol" Polyvinyl Alcohol...........................................12 Adhesives; temporary protective coating; emulsifying agents; emulsion stabilizer and thickener; textile size; thermoset ting resin modifier; synthesis of polyvinyl formal and poly vinyl butyral. Emulsifying Agents............................................................... 101 Hydrogen Peroxide........................................................ 10 Epoxidation, oxidation, hydroxylation and syntheses of organic compounds; purification of metal salt solutions; in manufacture of pharmaceuticals and drugs; synthesis of alkaline earth peroxides; polymerization catalyst; manu facture of organic peroxides. "Hypalon" Synthetic Rubber.......................................4 Base for products that must withstand oxidizing chemicals and fluids. "Hytrol" O Cyclohexanone...........................................73 Organic syntheses. Intermediate Chemicals (See Individual Chemicals, Listed Alphabetically on Yellow Pages) Organic syntheses, dye trade, general chemical manu facture. Lactic Acid--Technical, Food Processing, and Plastics . 44 Lactates; organic solvents and esters; cosmetics; acidulant in compounded dyeing assistants. "Fairprene" Synthetic Rubber Coated Fabrics .... 20 Diaphragms; gaskets; packings. Lactic Acid--U.S.P............................................................ 45 In manufacture of pharmaceuticals. "Fairprene" Synthetic Rubber Sheet Stocks.................... 20 "Lecton" Acrylic Resin Coated Fabrics Tank linings; gaskets; packings. and Laminates................................................................... 20 Formaldehyde--Low Methanol Grades...........................9 Electrical insulation. i Adhesives; plastics; sequestering agents; dyes; synthetic Lino-Writ Photographic RecordingPapers...................... 67 i fiber and sponges; paper, rubber, agricultural, textile and For mass spectrometry, oscillographicrecording and other photographic chemicals; explosives. dynamic measurement use. Formaldehyde--U.S.P........................................................... 9 Disinfectant, deodorant, preservative. Formamide--Technical .................................................. 73 Solvent; softener; chemical intermediate. Formic Acid....................................................................... 44 In manufacture of organic and inorganic formates, fat and oil hydrogenation catalysts, synthetic camphor, sol vents, perfumes, and pharmaceuticals. "Freon" MF Solvent...........................................................61 Selective solvent in degreasing applications. "Freon" TF Solvent...........................................................61 Selective solvent in degreasing and extraction operations. "Freon-11" or "F-l 1 " Fluorinated Hydrocarbon ... 60 Heat transfer medium. "Freon-114" or "F-l 14" Fluorinated Hydrocarbon . . 61 "Loroi" Fatty Alcohols...................................................... 73 Intermediates in organic syntheses; detergents; oil addi-, tives; plasticizers. "Ludox" Colloidal Silica.................................................. 45 For increasing hardness and slip resistance in emulsion floor waxes; inorganic binder for fiber glass and inorganic fibers; compounding polymer latex products to improve modulus and abrasion resistance; modifying latex adhe sives for improved bond strength; improved water and heat resistance of adhesive and fibrous structures; anti-soil treatment of carpets. Magnesium Sulfate--Technical . . . .......................... 45 Magnesium compounds. Magnesium Sulfate--U.S.P................................................ 45 In pharmaceutical products. Heat transfer medium. Methacrylate Monomers .... ............................... 75 Furan................................................................................ 10 Acrylic resins and copolymers; chemical intermediates. Intermediate. "G B S" Globular Sodium Bisulfate..................... Sulfuric acid substitute; acid cleaning compounds. Methyl Chloride................................................................. 7 44 Methylating agent in organic syntheses; solvent in lowtemperature reactions. ! "Hexalin" Cyclohexanoi.................................................. 73 Methyl Formate................. 73 Cyclohexanone and various cyclohexyl esters; solvent for Solvent; intermediate in organic syntheses. oils and waxes. Methylamine................................................................... 45 Hexamethylenetetramine .............................................. 10 Adhesives; plastics; in manufacture of pharmaceuticals; Intermediate in synthesis of pharmaceuticals, dyes, surface active compounds, photographic developers and soil fumi rubber; agricultural chemicals; explosives. gants. Hydrofluoric Acid............................................................ 44 Fluorides; acid fluorides; fluosilicates; fluoborates; fermen tation control and disinfectant in brewing; disintegrating silicates. Methylene Chloride........................................................7 Solvent for alkaloids and many heat-labile organic com pounds; low-temperature brine for making pharmaceuticals and fine chemicals. DUP210010753 INDUSTRIES SECTION Mixed Acid........................................................................17 Nitrocellulose; dyes; intermediates; and other organic nitro compounds. "Mylar" Polyester Film.................................................. 39 Laminated to aluminum foil or papers (kraft or asbestos) to form a moisture and chemical resistant construction for protecting thermal insulation and other equipment; used as a base for pressure sensitive tapes that resist chemical attack. Njeoprene ,..................................................................... 4 As a base for maintenance coatings base and other prod ucts that must withstand chemicals, oils, and heat. Nitroglycerin--Beta Lactose Mixture..................... 15, 17 In manufacture of medicinals. "Ocenol" Technical Oleyl Alcohol................................. 59 Intermediate for synthesis of detergents and emulsifying agents. "Oxone" Monopersulfate Compound............................. 11 For preparation of dentifrices, home laundry bleach, neu tralizer for hair waving compounds, stain remover for plastic ware. Paraformaldehyde........................................................... 10 In manufacture of adhesives, plastics, pharmaceuticals, tex tile and photographic chemicals; disinfectant. Perchlorethylene................................................................. 8 Solvent for rubber, waxes, tar, paraffin, gums; syntheses. "Perdox" Sodium Borate Perhydrafe............................... 11 For preparation of dentifrices, home laundry bleach, neu tralizer for hair waving compounds, stain remover for plastic ware. Potassium ........................................................................ 11 Laboratory reagent. Potassium Chloride...........................................................46 Potassium salts; compounded metal heat treating com positions. Potassium Hydroxide...................................................... 46 Potash soaps; potassium compounds; lubricants; in prep aration of cosmetics. Potassium Nitrate--U.S.P.................................................. 46 Compounded metal heat treating salts; oxidizing and ni trating promoter. Potassium Permanganate--Technical.............................46 Deodorizing, disinfecting, and bleaching for oils, fats, resins, and waxes; oxidizing agent in manufacture of dyes and intermediates. Potassium Permanganate--U.S.P......................................46 As an oxidizing agent in manufacture of perfumes, drugs and pharmaceuticals. Propionic Acid................................................................... 74 Organic syntheses; mold inhibitors; plasticizers; cellulose esterification. Sodium ............................................................................ 11 Indigo and dye intermediates; tetraethyl lead; sodium per oxide; sodium cyanide; syntheses; heat transfer medium. Sodium Acetate...............................................................46 Inorganic acetates; dyes and intermediates; compounded dye and printing pastes; photographic compounds; separa tion of opium alkaloids. Sodium Bicarbonate--Technical..................................... 47 Neutralizing agent in leather tanning, textile and paper in dustries; as an ingredient in fire extinguishing compounds. Sodium Bicarbonate--U.S.P............................................... 47 In manufacture of baking powder, pharmaceuticals, and food products. Sodium Bisulfite............................................................... 47 Tanning extracts; dyes; intermediates; inorganic bisulfites and hydrosulfites; antiseptic and sterilizing in brewing proc- oojoa, iu oiv^cr.'^ixxj.xg cvxxvx vmv>inxai.iug- Sodium Carbonate--Anhydrous..................................... 47 Sodium organic and inorganic salts; soaps; dyes; interme diates; neutralizing; hydrolyzing; saponifying; pH control; water softening; artificial zeolites; general industrial clean ing; compounded metal heat treating salts and fluxes; metal oxide catalysts. Sodium Carboxymethyl Cellulose......................................18 Adhesives. Sodium Cyanide 96%.......................................................11 Indigo; dye intermediates; pigments; case hardening and electroplating; syntheses; sequestering agents. Sodium Hydrosulfite...................................................... 56 Reducing and stripping agent for dyes; bleaching agent for paper, pulp, sugar, clay. Sodium Metabisulfite...................................................... 47 Tanning extracts; dyes; inorganic bisuliites and hydrosul fites; antiseptic for fermentation industry; antichlor follow ing bleaching and chlorination; photographic fixing salts. Sodium Perborate Tetrahydrafe--N.F................................ 11 In preparation of dentifrices and pharmaceuticals. Sodium Perborate Tetrahydrafe--Technical.....................11 Bleaches; polymerization catalyst. Sodium Peroxide................................................................11 Inorganic and organic peroxides. Sodium Phosphate--Di--Food Grade.............................47 Boiler compounds; in making processed cheese; paper coatings. Sodium Pyrophosphate...................................................... 46 Iron and other pyrophosphates; water softener; general dis persing agent. Sodium Silicate...............................................................48 Silica gel; artificial zeolites; adhesives; detergents. Sodium Siiicofluoride...................................................... 48 Aluminum melting fluxes. Sodium Sulfate........................................................46, 48 Standardizing dyes; boiler feed water treatment; drying agent for acetone and other organic solvents; turkey red oil; compounded detergents. Sodium Sulfide................................................................... 48 Sulfur dyes and intermediates; thioglycols; petroleum ad ditives; sulfur soaps; depilatories in tanning; precipitat ing heavy metals; photographic development and toning chemicals. Sodium Sulfite................................................................... 48 Dyes; intermediates; tanning extracts; antichlor following bleaching ar.d chlorination; anti-fermentative, antiseptic, and sterilizing in brewing; deoxygenating boiler feed water; photographic developers. 123 DUP210010754 ? / INDUSTRIES SECTION T i-ir Sodium Thiosulfate...........................................................48 Zinc Chloride................................................................ 49 Dyes; antichlor in bleaching and chlorinating; compounded photographic fixing chemicals. Zinc salts and soaps; soldering, tinning and galvanizing fluxes; catalytic and dehydrating agents for dyes, interme I Solvents............................................................................ Ill diates, alcohol and other organic compounds; ingredient in dry batteries. Stannous Chloride...........................................................48 Dry colors; pigments. Zinc Peroxide................................................................ 11 In the manufacture of deodorants, dusting powder, oint Strontium Nitrate............................................................... 48 ments, and foot powders. Pure strontium salts. Sulfamic Acid................................................................... 48 Acid cleaning for removal of scale deposits from heat exchangers, condensers, compressor jackets, piping, etc.; nitrite removal in diazotization of dyes and pigments; cata lyst in resin polymerization; mild sulfating or sulfonating agent. Sulfur--N.F...................................................................... 48 In manufacture of pharmaceuticals. Sulfur--Technical ........................................................48 Thio and sulfide compounds; sulfuric acid; sulfur chlorides; sulfur dioxide; organic oxidation and chlorination catalysts. Surface Active Agents...................... 2, 12, 56, 57, 58, 59 Wetting; scouring; dispersing, emulsifying; detergent; sur face tension reducing. Terephthalic Acid............................................................... 18 Intermediate in chemical syntheses. Tetrachloroelhane............................................................. 8 Syntheses; solvent. Tetrahydrofuran............................................................... 10 Intermediate and solvent; adhesives for plastics and films; extraction in the manufacture of drugs and pharmaceuticals. Electrical and Electronic Industries Acetate Film........................................................................38 Capacitor and magnetic tape manufacture. Acetate Yarn ....................................................................84 Wire serving and tapes. "Alafhon" Polyethylene Resin..........................................75 Electrical insulation, including signal-control cable, street lighting cable, and a number of radio, telephone and television cables. "Armalon" TFE-Fluorocarbon Coated Glass Fabrics, Tapes and Laminates.......................................................20 Electrical insulation. "Dacron" Polyester Fiber.................................................. 84 Non-woven tapes, fabrics, "Delrin" Acetal Resin (Molding and Extrusion Powder]............................................................................ 75 Electrical components; abrasion-resistant coatings for wire and cable; control cable sheathings. DMF--Dimethyl Formamide.................................. 43, 62 Degreasing and defiuxing electronic parts. "Tetralin" Solvent--Tetrahydronaphthalene .... 58 Solvent and intermediate. Expansion Rivets............................................................... 18 As a "blind" rivet for fastening assemblies partially or Titanium Metal............................................................... 71 totally inaccessible from the rear, Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. "Freon" MF Solvent Trichloromonofluoromethane . . 61 Cleaning electrical motors and components. Trichlorethylene................................................................. 8 Extraction of oils, fats and waxes; alkaloids; chemical syntheses; azeotropic dehydration of alcohols and other organic compounds; freezing point depressant in carbon tetrachloride fluids. "Freon-12" Dichlorodifluoromethcme.............................60 Vapors are used alone and with air, nitrogen, or carbon dioxide mixtures for leak testing electrical and electronic components for cracks, holes or manufacturing defects. I Trimethylamine............................................................... 49 Intermediate for choline salts (animal feed supplement) "Freon" TF Solvent Trichlorotrifluoroethane .... 61 Degreasing and cleaning electrical motors and parts. and quaternary ammonium salts. "Hypalon" Synthetic Rubber............................................4 Urea, Crystal and Shotted.............................................. 74 Base for wire and cable protective jackets. Intermediate in the preparation of pharmaceuticals; resins for adhesives; finishes, flame retarding agents, paper and textile treating agents and molding powders. Insulating Varnishes...........................................................28 Coatings to waterproof and to improve dielectric proper ties of fabric covered electrical wires and cables. Vinyl Acetate....................................................................12 In manufacture of polyvinyl acetate, polyvinyl alcohol, polyvinyl butyral, polyvinyl formal, and vinyl chloridevinyl acetate copolymers. "Vifon" Synthetic Rubber.....................................................5 Rubber base for flexible parts that must withstand chemi cals, oils and other liquids at exceptionally high tem peratures. Wetting Agents.........................................................56,57 Zinc Ammonium Chloride.................................................. 49 Soldering, tinning and galvanizing fluxes. "Leclon" Acrylic Resin Coated Fabrics and Laminates................................................................... 20 Electrical insulation. "Lucife" Acrylic Resin (Molding Powders).................... 75 Automobile instrument dials, tail light lenses and reflectors; lighting fixtures. Luminescent Chemicals (Phosphors)................................. 69 Cathode ray tubes, including television tubes for black and white and color television receivers; scintillation counters; focusing plates for ultraviolet microscopy; screens for electron microscopes. DUP210010755 INDUSTRIES SECTION Methylene Chloride.................................................................... 7 Cold cleaning mixtures for electric motors. "Mylar" Polyester Film..........................................................39 Layer insulation in dry and liquid filled capacitors; coil, phase separator, and slot liner insulation in motors and generators; dry type and liquid filled transformers; barrier tape for wire and cable; suggested for a mica support and as a base for various types of electrical, industrial, and magnetic recording tapes; electrostatic speaker diaphragms; as a laminate for printed circuit boards. Neoprene .......................................................................................... 4 Base for wire and cable protective jackets. Nylon.................................................................................................. 84 Wire serving, braid and tapes. "Orion" Acrylic Fiber...................................................................84 Non-woven tapes, wire serving, slot liners. Perchlorethylene................................................................................ 8 Vapor degreasing;vapor drying; cold cleaning mixtures for electric motors. Potassium Silicate--Solution--Electronics 200 ... 46 Coating cathode ray tubes with phosphors. Rayon Textile Yarns...........................................................84 Wire serving, braid, tapes, and lacing twines. Resistor Enamels................................................................................6 Ceramic fluxes for coating wire-wound power resistors. Rubber Chemicals................................................2, 3, 4, 45, 47 Compounding ingredients, curing agents, antioxidants, colors, softeners, mold release agents and other chemicals for use in compositions for wire and cable insulations and jackets. "Rulan" Flame-Retardant Plastic for Electrical Insulation........................................................................76 Insulation for many types of wires and cables where flame resistance is important; components for radio, telephone, and television. Silicon, Hyperpure........................................................................ 71 Transistors and other electronic applications. Silver Preparations...........................................................................6 Printed circuits; solder seal; static shielding; electroplating base. "Super Cordura" Rayon Yarn...................................................84 Lacing cords and twines. "Teflon" TFE-Fluorocarbon Resin (Aqueous Dispersion)...................................................................76 Cast film for capacitor layer insulations; coated glass fabric and laminates for electrical insulation; wire enamels for magnet wire. "Teflon" TFE-Fluorocarbon Resin (Molding and Extrusion Powders)........................................ 76 Spacers for coaxial cables; inserts for coaxial connectors; tube sockets; insulation for high-frequency, high-tempera ture and high-voltage wires and cables; high-quality wrap ping tape for insulation in motors, generators and con ductors. Trichlorethylene................................................................................ 8 Vapor degreasing; cold cleaners. "Volan" Methacrylato Chromic Chloride..............................49 Bonded glass fiber insulation. Wire Enamels................................................................... 29 Insulating coatings for electrical wires and cables. "Zytel" Nylon Resin (Molding and Extrusion Powders)................................. 76 Abrasion-resistant jacketing for electrical wires and cables; coil forms of many types; wire connectors; strain-relief grommets; switch components. Explosives and Pyrotechnics Industries Ammonium Nitrate........................................................... 17 Commercial and military explosives. Ammonium Sulfamate...................................................... 42 Flame retardant treatment of clothing. "CM" Flame Retardant...................................................... 43 Flame retardant treatment of clothing. Cyclotrimethylenetrinitramine (Cydonite, Hexogen, RDX)................................................................... 17 Shaped charges, "Primacord" and explosive specialty items. Dyes ........................................................................ 55, 56 Colors for smoke flares. Hexamethylenetetramine.................................................. 10 Trimethylenetrinitramine. Lead Azide........................................................................17 Detonators. Mixed Acid........................................................................17 Nitrating agent in manufacture of explosives, TNT, smoke less powder and nitroglycerin. Pentaerythrite Tetranitrate.............................................. 18 Detonators and safety fuses. "Pyroeore" ignition Detonating Cord............................. 18 High-velocity detonating cord. Sheet Explosive............................................................... 17 High explosive application and special applications as ex plosive swaging, metal hardening, metal forming, shaped charges or wherever thin layers of a high-velocity Class A explosive is desired. Smokeless Powder...........................................................18 Propellant for military and sporting rifle and shotgun ammunition. Sodium ............................................................................ 11 Sodium azide for detonators. Sodium Phosphate--Di..................................................47 Boiler feed water treatment and water softening. Strontium Nitrate...............................................................48 Flame colorant in pyrotechnics, signal flares, and tracer bullets. Sulfur..........................................................................48,50 Black powders; matches and pyrotechnics. TNT (Trinitrotoluene).......................................................18 Detonators. Trichlorethylene................................................................. 8 Rocket flushing. "X-12" Flame Retardant..................................................49 Flame retardant treatment of workmen's clothing, welder's screens, drop cloths, etc. 125 DUP210010756 INDUSTRIES SECTION Fabricated Metal Products Industry Addition Agents (Plating)........................................................ 89 Electroplating baths. Aluminum Enamels...........................................................................6 Porcelain enamels for use on aluminum alloys. Ammonium Chloride.................................................................. 42 Galvanizing, tinning and soldering flux; dry cells and bat teries; plating solutions; purifying flux for Babbitt metal; electrolytic zinc. "Armalon" TFE-fluorocarbon Fiber Felt.............................. 20 Gaskets exposed to corrosive chemicals. Cadmium Plating Products...........................................................8 Electroplating; protective, decorative, and conductive me tallic deposits on parts and shapes fabricated from iron and steel. Chloroform.......................................................................................... 7 Vapor degreasing solvent in specialized applications in cluding precision instruments. Colors (inorganic).................................................................... 6,7 Pigmentation in porcelain enamels for sanitary ware, stoves, signs, etc. "Freon" MF and "Freon" TF Solvents................................... 61 Degreasing agents. Heat Treating Compounds.........................................................11 Heat treating of metals. "Hitec" Heat Transfer Salt.........................................................17 Cleansing of extrusion parts contaminated with certain plastics; heating and cooling liquid-temperature range 300-1000F. Hydrofluoric Acid............................................................................. 44 Pickiing stainless steei; removal of siiiceous scales from steel products and castings; etching, cleaning and pickling light metals; anodizing aluminum in electroplating baths; protective chemical coatings on magnesium alloys. Hydrogen Peroxide....................................................................10 Rust proofing; anti-pitting agent in electroplating baths; defiring soldered silver; purifying metal salt solutions in nonferrous metal refineries. Hydroxyacetic Acid........................................................................73 Electropolishing, metal cleaning and soldering flux. Industrial X-ray Film.................................................... ..... . 65 Non-destructive testing of castings and welds. Copper Plating Chemicals.................................................... 8, 9 Methyl Chloride................................................................................7 Electroplating; protective, decorative, and conductive me Fluid for thermometric and thermostatic equipment. tallic deposits on parts and shapes fabricated from iron and steel. Copper Sulfate.................................................................................. 43 Electroplating copper; galvanic copper coatings; lubricant in wire drawing; algaecide in water treatment. Copperas (Ferrous Sulfate)........................................................ 43 Precipitant in water purification; boiler feed water treat ment for removal of silica. Methylene Chloride.......................................................................... 7 Secondary refrigerant in cold-testing and cold-treating in stallations; vapor degreasing solvent in specialized applica tions; cold cleaners; paint removers. "Mylar" Polyester Film............................................................. 39 Base for pressure sensitive masking tape used in plating solutions; (when metallized and printed) tough, inexpensive nameplate or sign, reflectors; laminations to metal for Cyanide Mixtures...............................................................8, 9, 11 protection against corrosion, tarnishing and for decorative , Case hardening of steel (heat treatment). purposes. 1 Diatomaceous Earth........................................................................43 Niobium Metal.................................................................................. 71 : : Filler in welding rods. Ductile metal of low thermal neutron cross-section. Base "Duclean" No. 1 Inhibited Sulfuric Acid--Technical . 43 for high temperature alloys. Pickling iron and steel; removing deposits such as rust, Perehlorethylene..................................................................... 8 I hard water scale, boiler scale, etc. "Duclean" No. 2 Inhibited Hydrochloric Acid-- Vapor degreasing; vapor drying agent; cold cleaner; high gravity- and dielectric-fluid in instruments. Technical ....................................................................................... 43 Pickling iron and steel; removing deposits such as rust, hard water scale and boiler scale. Phosphoric Acid.................................................................... 46 Rust-proofing and paint-bonding coatings on steel and galvanized surfaces; anodizing aluminum. Dyes......................................................................................... 55, 56 Colors for anodized aluminum. Electropolishing Solution................................................................9 Electropolishing stainless steel. "Elvacet" Polyvinyl Acetate Emulsion....................................12 Foundry core binder; adhesive for wooden patterns; pro tective coating. Photographic Films...............................................................66, 67 Non-destrnctive testing of parts; design work. Photographic Papers..........................................66, 67, 68, 69 Non-destructive testing of parts; design work. Potassium Cyanide............................................................... 11 Nitriding of steel; electroplating. "Elvanoi" Polyvinyi Alcohoi................................................... 12 Protective coatings (temporary); surface protection for casting molds to prevent work from sticking to sides. Potassium Nitrate N.F............................................................. 46 Metal heat treating andcleaning baths;electroplating solutions. Expansion Rivets............................................................................. 18 "Blind" riveting of assemblies partly or totally inaccessible from the rear. Potassium Permanganate.................................................... 46 Oxidizing agent in picklingstainless steels;coloringcopper alloys. Fluxes, Soldering and Tinning.......................... 44 Potassium Silicate............................................................... 46 I i Compound fluxing agents. Binder in welding rod coatings. Formaldehyde......................................................................... 9, 10 Sheet Explosive.................................................................... 17 Bright nickel plating baths; preservative for cutting oils; Special applications as explosive swaging, metal hardening acid inhibitors. and metal forming. 126 DUP210010757 INDUSTRIES SECTION Silver Preparations............................................................. 6 Printed circuits; solder seal; static shielding; electroplating base. Sodium ............................................................................ 11 Ferrous and nonferrous metal descaling; heat transfer medium; elimination of metal impurities in ferrous and nonferrous metal refining. Sodium Acid Fluoride...................................................... 47 Electroplating solution ingredient. Sodium Bichromate...........................................................*+/ Pickle and bright dip ingredient for copper alloys; protec tive coatings in magnesium alloys; corrosion inhibitor in aqueous systems; temporary rustproofing of steel. Sodium Carbonate--Anhydrous..................................... 47 Cleaning and degreasing metals; electroplating solutions; fluxing agent in enameling frits; removal of sulfur from iron; molten heat treating bath for stainless steel. Sodium Cyanide 96%...................................................... 11 Case hardening of steel; electroplating; cleaning sheet and plate steel; neutralizing of steel after pickling. Sodium Metabisulfite...................................................... 47 Introduction of sulfur into machinable steels; deoxygenating boiler feed water. Sodium Metasilicate.......................................................... 47 Metal cleaning and degreasing. Sodium Perborate Tetrahydrate......................................11 Electroplating baths as anti-pitting agent. Sodium Phosphate--Di..................................................47 Water softening and boiler feed water treatment; prebonderizing treatment of galvanized coatings. Sodium Silicate...............................................................48 Binder in welding rod coatings in foundry core binders; separating mediums and coatings for transformer and re sistance coils; enameling slips; adhesive for metalboard and aluminum foil paper; treatment of water to prevent corrosion of pipe lines, etc.; hot top collars for pouring steel ingots; insulating coating on electrical steel; metal cleaning and degreasing; ore flotation. Sodium Silicofluoride...................................................... 48 Flux and opacifier in vitreous enamels; cover flux in re melting secondary aluminum. Sodium Sulfide................................................................... 48 Darkening copper alloy surfaces; precipitating heavy metals from plating solutions. Sodium Sulfocyanide...................................................... 12 Black nickel plating; cyanide copper plating. Stannous Chloride.......................................................... 48 Galvanic tinning and electroplating. Sulfamic Acid...................................................................48 Lead, copper, nickel and indium plating baths; lead electro refining; anodizing; cleaning and pickling. Sulfur......................................................................... 48,50 Magnesium smelting flux; oxidation inhibitor in magnesium casting molds; sulfurizing steel. Tin Plating Products............................................................ 9 Electroplating; protective, decorative, and conductive me tallic deposits on parts and shapes made from iron and steel. "Ti-Pure" VG Titanium Dioxide..................................... 71 Vitreous enamels for iron and steel. Titanium Metal............................................................ 71 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Trichlorethylene............................................................ 8 Vapor degreasing solvent; high gravity- and dielectric-fluid in instruments. X-ray Intensifying Screens..............................................66 Used in combination with x-ray equipment and film for diagnostic purposes. Zinc Ammonium Chloride..............................................49 Galvanizing flux. Zinc Chloride................................................................... 49 Dry cell batteries; hot dip tin, solder, and lead coating flux; electrogalvanizing; flux for purifying Babbitt for re-use. Zinc Plating Products........................................................ 9 Electroplating; protective, decorative, and conductive me tallic deposits on parts and shapes of iron and steel. "Zytel" Nylon Resin (Molding and Extrusion Powders)............................................................................76 Hardware; hand tools; plumbing supplies and fittings; drapery slides; cutlery. Food Industry Acetate Film....................................................................... 38 Package laminations, small window boxes, overwrapping for products where minimum shrinkage is required. Aluminum Ammonium Sulfate--N.F................................ 41 Firming or crispening agent in processing pickles; clarify ing agent for process and boiler water; anti-cracking agent in ice manufacture. "Armalon" TFE-fluorocarbon Resin Coated Glass Fabrics................................................................... 20 Anti-stick and anti-friction conveyor belts and covers for heat sealing units. Calcium Peroxide............................................................... 10 Preparation of bread dough developers. Cellophane....................................................................... 38 Packaging for many food and non-food products. "Cel-O-Seal" Cellulose Bands......................................... 39 Secondary seals for glass-packed food items; hold primary closures tight, preventing spillage and tampering. Chloroform......................................................................... 7 Extraction of heat labile oils and fats. "Cylan" Calcium Cyciamate..........................................50 Non-nutritive sweeting agent foruse in dietetic foods and beverages. "Duclean" No. 2 Inhibited Hydrochloric Acid .... 43 Removing hard water scales from evaporators, bottle wash ing machines, condensers, and heat exchangers made from steel. "Elvacet" Polyvinyl Acetate Emulsion............................. 12 Greaseproof paper coatings. "Elvanol" Polyvinyl Alcohol..........................................12 Greaseproof paper coatings. Formaldehyde--U.S.P..................................................9, 10 Disinfectant; deodorant. Lactic Acid--Food Processing . ..................................... 44 Flavoring agent and preservativein processing cheese, 127 'o' DUP210010758 INDUSTRIES SECTION pickles, olives, carbonated beverages, jams, and infant foods; extraction of pectin from apple pomace; softening of brewing and other process waters; purifying gelatin. Titanium Meta!............................................................................. 71 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. "Lucite" Acrylic Resin (Molding Powders).................... 75 Lighting fixtures to protect from glassshattering hazard; drink dispensers. Trichlorethylene................................................................................8 Extraction of alkaloids; heat transfer agent in sterilization of canned foods. Methylene Chloride.............................................................7 Extraction of heat labile oils and fats. "Myceban" Calcium Propionate..................................... 73 Mold and rope inhibitor in bread, cakes, pies, other bakery goods and certain cheeses. Trimethylamine................................................................................49 Intermediate for choline salts and quaternary ammonium salts. Forest Products Industry "Mycoban" Sodium Propionate..................................... 73 Mold and rope inhibitor in bread, cakes, pies, other bakery Ammonium Sulfate.................................................................... 72 Flame retardant. goods and certain cheeses. Copper Sulfate...............................................................................43 "Mylar" Polyester Film................. 39 Wood preservative. tI:: Packaging for heavy produce, gifts, and items with sharp points, odd shapes, and long shelf life. Vacuum packaging of meats, cheese and poultry, conveyor belts. Copperized CZC Chromated Zinc Chloride--Technical 43 Wood preservative. Paraformaldehyde................. Disinfectant; deodorant. 10 CZC Chromated Zinc Chloride--Technical.........................43 Wood preservative and flame retardant. Perchlorethylene................................................................. 8 Heat transfer agent in sterilization of canned foods. "Deenate" DDT Insecticides........................................................ 50 Control of major pests of forests. Rotofilm............................................................................ 67 Used for making etching resists especially in gravure print "Elvacet" Polyvinyl Acetate Emulsion....................................12 Base of bonding adhesives for wood and sawdust. ing of labels and packages. "Elvanol" Polyvinyl Alcohol................................................... 12 Screen Process Film...........................................................67 Adhesive and binder for wood and sawdust. For producing photographic stencils for silk screen print ing of labels and packages. Formaldehyde......................................................................... 9, 10 Synthetic adhesives for bonding plywoods and structural Sodium Bicarbonate--U.S.P...............................................47 pieces; cork products. In manufacturing baking powders and self-raising flours; neutralizing agent for acidity in food processing; condition ing agent in food cooking, candy manufacture, etc. Hydrogen Peroxide........................................................................ 10 Bleaching of furniture and wood. IN-2555 Fungicide........................................................................44 Sodium Cyanide 96%...................................... Fumigation of flour mills, etc. 11 Sodium Metasilicate.......................................................... 47 Packing house, dairy, and general industrial cleaning. Sodium Nitrite--U.S.P........................................................ 18 Rapid-curing salt for pork and beef products. Sodium Phosphate--Di.................................................. 47 Emulsifier in manufacture of processed soft cheese and evaporated milk products; water softening. Sodium Silicate................................................................... 48 Adhesive in closing paperboard containers; oil and grease resistant coating on paper barrels and tubs. Sodium Sulfate SR...........................................................46 Mineral stock feeds. Sulfamic Acid................................................................... 48 Acid cleaning for removal of scale deposits from dairy, sugar and brewery equipment. _ Rot prevention on millwork. "Lignasan" Fungicide.................................................................. 45 Anti-staining agent. Magnesium Sulfate........................................................................45 Magnesium lignin sulfonate adhesives and core binders. "Mefsan" Fungicide...................................................................50 Protection against mold; sap stain control. Paraformaldehyde.........................................................................10 Synthetic adhesives used for bonding plywoods and struc tural pieces. Perchlorethylene................................................................................ 8 Preservation, extraction and accelerated drying of lumber. Sodium Bisulfite............................................................................. 47 Solubilizing vegetable tanning extracts. Trichlorethylene......................................................... 8 Preservation, extraction and accelerated drying of lumber. Sulfur..........................................................................48,50 Sulfur dioxide for preserving and bleaching foods, fruits, syrups, etc.; deodorizing and fumigating. Urea, Crystal and Shotted........................................................ 74 Seasoning and bending of lumber; intermediate for ureaformaldehyde resins used in wood adhesives, impregnation of wood, and waste wood binder. "Teflon" TFE-FIuorocarbon Resin..................................... 76 Non-adhesive surfaces for bakery rolls; candy molds. Weed Killers...........................................................................51,54 Control of noxious plants in forests. Tetrahydrofuran............................................................... 10 Extraction of alkaloids. Zinc Chloride.................................................................................. 49 Preservation of wood. 128 DUP210010759 INDUSTRIES SECTION Graphic Arts Industry Aluminum Chloride . . . Photographic fixing baths. 41 Cellulose Sponge...................................... Wiping negatives and prints. 27, 40, 69 Colors........................................... 4, 6, 25, 55, 63, 70, 71 Coloring paper, textiles, printing inks, etc. Commercial Photographic Films (See Photographic Films)...................................... 66, 67 For duplicate negatives. "Cronar" Polyester Graphic Arts Films......................... 65 For lithographic and photoengraving negatives and posi tives. Dimethyl Formamide................................................... 43 Solvent in printing inks for textiles and plastic sheeting. "Duponol" RA Surface Active Agent.............................57 Surface active agent for cleaning rollers and plates. Dyes.......................... 55,56 Coloring textiles, paper, carbon paper, typewriter ribbons, inks. "Elvacef" Polyvinyl Acetate Emulsion ............................. 12 Bookbinding adhesive. "Elvanol" Polyvinyl Alcohol..........................................12 Photosensitive stencil screens; surface protection of etch ings; molded printing plates and rollers. "Fabrikoid" Pyroxylin Coated Fabrics.............................20 Bookbinding. Formamide....................................................................... 73 Adhesive modifier. "Freon" TF Solvent...........................................................61 Film cleaner. Hot Melt Bookbinding Adhesives..................................... 27 Binding paper together; binding outside covers to maga zines, etc. Hydrogen Peroxide........................................................... 10 Oxiziding agent in blueprint developing. "Litho" Transparent Photographic Paper.........................67 Line reproduction medium for all types of reproduction processes. "Lucite" Acrylic Resin (Molding Powders)........................ /5 Hot melt adhesives; coatings; signs. "Ludox" Colloidal Silica..................................... 45 Precoating for photo sensitized papers for higher color contrast in final print. Monomethylamine.............................. ...................._ 45 Intermediate in the manufacture photographic de velopers. "Mylar" Polyester Film ................................. 39 Base for pressure sensitive LPes ^at are thin and tough; drawing surface in cartogaPhy an^ drafting; temporary support medium. Neoprene Latex 4 Additive for paperpulp to impart wet strength, chemical resistance and otwr properties. Nitrocellulose..........................'....................................17 Lacquers; enamels; bronzing liquids; photographic film. Paper Lacquers................................................................... 29 Imparting special properties to papers. Perchlorethylene................................................................. 8 Cleaning printing rolls; photographic film lacquer. Photographic Chemicals.................................. 66,69 Developers and fixers forphotographic filmsand papers. Pigment? ..................................................................... 70* 71 Pigmenting paper, textiles, printing inks, etc. "PX" Pyroxylin Impregnated and Vinyl Impregnated Book Cloth........................................................................19 Bookbinding. Rotofilm........................................................................ .67 Used for making etching resists, especiallyfor gravure printing. Screen Process Film........................................................67 For producing photographic stencils for silk screen printing. Sign Finishes..................................................................... 29 Undercoats; sign enamels; stencil paste and clear sign fin ishes for silk screen stencil, press printed, gum printed and lithographed metal signs. Sodium Carboxymethyl Cellulose......................................18 Desensitizing in offset printing. Sodium Metasilicate........................................................47 Cleaning and degreasing metal plates prior to etching; general industrial cleaner. Sodium Sulfocyanide................................................... 12 Film developer solution. Sodium Thiosulfate--Photographic Quality.................... 48 Fixing agent to dissolve unchanged silver salts. Trichlorethylene................................................................. 8 Cleaning printing rolls; remoistening adhesives for print ing rolls; type cleaners; photographic film cleaning; de veloper in special photoengraving and photolithographic processes. Urea, Crystal and Shotted..............................................74 Silt screen and roller screen printing. Non-Metallic Mineral Products Industries Aluminum Chloride...........................................................41 Manufacture of roofing granules. Barium Carbonate...........................................................42 Prevention of scum or efflorescence on brick, pottery, tile, etc. Ceramic Products................................................................. 6 Fluxes; colors; stains. Colors (Inorganic)................................................................. 6 Decorating in the ceramic industry. "Elvacef" Polyvinyl Acetate Emulsion............................. 12 Binder in ceramic ware, clay and sand; adhesive in tile board; preparation of tile cement; binder in asbestos build ing materials and plaster; sizing and finishing of glass fibers; binder in insulating materials; strengthening agent in ce ment; emulsifying agent. 129 DUP210010760 f ; INDUSTRIES SECTION ! "Elvanol" Polyvinyl Alcohol...........................................12 Aluminum Stearate.................................................42 Photosensitive films for stencils used in decorating ceramics Flattening agent for paints, lacquers and varnishes. and glassware; ceramic binder. ; Aluminum Sulfate.................................................42 Formaldehyde............................................................9, 10 Aluminum hydrate fillers; Marsyellow; color lakes; dry Adhesives for packing, sheeting, gaskets, etc.; preservative colors; pigments. for asphaltic roofing and road materials; disinfectant. Fibrous Potassium Titanate...........................................71 The most efficient thermal insulator known on either a volume or weight basis in the temperature range of 1300 F. to 2200 F. Aniline............................................................................... 17 Dyes; paints; varnishes; pharmaceuticals. Colors...................................................................... 99 Coloring paints, varnishes, etc. "Freon" Solvents............................................................... 61 Degreasing agents for plastic parts and wire enamels. Copper Cyanide...................................................... 8 Pigment in anti-fouling marine paint. Glass Enamels..................................................................... 6 Vitreous enamels for glassware, beverage bottles and other Copper Sulfate......................................................... 43 Pigments. containers. Copperas [Ferrous Sulfate).................................... 43 Hydrofluoric Acid...............................................................44 Etching and frosting glass; pickling glass molds; increasing porosity of porcelains. "Ludox" Colloidal Silica.................................................. 45 Binder for inorganic fibers, mineral materials; ingredient in specialty cements. Methylene Chloride.............................................................7 Heat transfer medium in decorations for Christmas trees and similar novelties; vapor degreasing solvent for plastic parts. Prussian blue; iron oxide pigments. "Decalin" Solvent--Decahydronaphthalene.... 59 Diatomaceous Earth ...........................................................43 Pigment extender and flattingagent inoleoresinous and rubber-base paints. Dimethyl Formamide.............................................43 Resin solvent. Dimethyl Sulfate...............................................................72 Dye intermediates such as anisole, methyl hydrazine sulfate. Perchlorethylene................................................................. 8 Dyes............................................................................55,56 j Vapor degreasing and vapor drying of glassware. Coloring varnishes and stains. j Precious Metal Preparations.......................................6, 7 "Elvacet" Polyvinyl Acetate Emulsion............................. 12 Decorating in the ceramic industry. Vehicle for water-thinned paints, primers and sealers; sur face protection. "Quilon" Chrome Complex........................................................ 46 3 Finishing treatment of glass fabrics. "Elvanol" Polyvinyl Alcohol..........................................12 Salt Cake............................................................................46 Surface protection (film); water paint binder; thickener; emulsifying agent. Batch ingredient in making glass. Formaldehyde............................................................ 9, 10 Silicon, Hyperpure.............................................................71 Synthetic resins and pentaerythritol for paints and varnishes. Diodes and transistors. "Freon" Propellents .............................. 60, 61 Silver Preparations.............................................................6 Propellents for aerosol paints. Printed circuits; solder seal; static shielding; electroplating base. "Hexalin" Cyclohexanol.................................................. 73 Solvent for varnishes, etc. Sodium Carbonate--Anhydrous.....................................47 Hydrogen Peroxide........................................................... 10 ! Fluxing ingredient in enamels, glazes and frit; manufacture of glass; deflocculating agent in clay slips. Bleaching oils. "Hylene" Organic Isocyanates............................................3 i Sodium Silicate................................................................... 48 Refractory and acid-proof cements; coloring roofing gran Constituent of urethane polymers used for highly weatherresistant, clear varnishes. ules; abrasive wheel cements; deflocculating agent in clay slips; cement-asbestos products; briquetting glass batches; peptizing agent; enamel frits and pottery glazes. "Hypalon" Synthetic Rubber............................................4 Base for durable, colored, weather-resistant, and chemical resistant paints. ! Sodium Silicofluoride..............................................48 Opacifying agent in making glass; fluxingingredient in vitreous enamels and chinaware glazes. "Hyfrol" O Cyclohexanone..............................................73 Solvent for lacquers, especially those containing nitro-celluIose or polyvinyl chloride and its copolymer; thinner for Trichlorethylene........................................................ 8 lacquers. Solvent for protective glass coatings(silicone);.vapor de greasing solvent for glassware. IN-2555 Fungicide...........................................................44 Mildew-proofing ingredient in oil and spirit paints. "Volan" Bonding Agent......................................... 49 Water resistant bonding agent for glass fibers in reinforced plastic laminates. Paint, Pigment, and Varnish industries Adipic Acid......................................................................... 72 Modified alkyd resins for finishes. Intermediate Chemicals................. Alphabetical Section Synthesis of pigments, varnishes, etc. "Lucite" Acrylic Resin (Methacrylate Polymers) . . . 75 Ingredients in finishes. "ludox" Colloidal Silica.................................................. 45 Adhesion agent in water emulsion paints for anti-soiling painted surfaces. INDUSTRIES SECTION Methylene Chloride........................................................7 Active solvent ingredient of non-flammable paint removers. Neoprene.........................................................................4 Base for chemical- and corrosion-resistant maintenance paints.. Nitrocellulose....................................................................17 Lacquers; enamels. Paraformaldehyde........................................................... 10 Synthetic resins for paints and varnishes. Perchloreihylene................................................................. 8 Solvent. Pigments........................................................................108 Coloring of paints, varnishes, etc. Potassium Silicate...........................................................46 Carrier in flame retardant and heat resistant paints. "Shirlan" Extra Industrial Fungicide-- Technical Salicylanilide.................................................. 58 Fungicide to be incorporated in paint formulas. Sodium Bichromate...........................................................47 Zinc, barium, lead and other chrome colors. Sodium Cyanide 96%.......................................................11 Pigments. Sodium Metasilicate...........................................................47 Detergent for cleaning processing equipment, containers, etc. Sodium Silicate................................................................... 48 Inorganic carrier and binder in flame retardant and corro sion proof paints; calcium silicate pigments; colors and fillers; paints for separating steel sheets during annealing operations; cold water paints. Sodium Sulfate................................................................... 48 Blanc fixe; ultramarine and other dry colors. Stannous Chloride...........................................................48 Chrome green, chrome yellows and other pigments. Sulfamic Acid................................................................... 48 Nitrite removal in diazotization of dyes and pigments. Surface Active Agents .... 2,12,56,57,58,59,71 Wetting; scouring; dispersing; emulsifying; surface tension reducing; detergents. Tetrahydrofuran............................................................... 10 Resin solvent. "Tetralin" Solvent--Tetrahydronaphthalene .... 58 Titanium Pigments...........................................................71 Prime hiding white pigments for paints, varnishes and lacquers. Trichlorethylene................................................................. 8 Solvent; thinner for asphaltic paints. Urea, Crystal and Shotted..............................................74 Intermediate in preparation of flame retardant paints, and modified alkyd resins. Zinc Chloride................................................................... 49 Zinc chromate primers and paints; paint driers; cellulose acetate for lacquers; preservative in cold water casein paints. Petroleum Industry Brush Killers.................................................................... 51 Specific attack on brush for pipe line right-of-way main tenance. Diglycolic Acid................................................................ 72 Oil well emulsion breakers. Dimethylamine.................................................................. 43 Additive for gasoline stabilizers. Dimethyl Formamide...................................................... 43 Selective refining solvent for acetylene, acid gases and petroleum constituents, Diphenylamine................................................... 43, Antioxidant in greases and oils. 53 DMF Antistall Additive.......................................43, 62 Added to gasoline to prevent engine stalling during cool, humid weather. Dyes............................................................................55,56 Colors for waxes and candles. "Elvanol" Polyvinyl Alcohol..........................................12 Low water-loss cement. "Fairprene" Synthetic Rubber Coated Fabrics .... 20 Gaskets, diaphragms, washers and packings. Formaldehyde.................................................................... 9,10 Acid inhibitor to control hydrogen sulfidecorrosion in oil wells; stabilizer for fuel oils; refining petroleum products; disinfectant. Fuel Oil Additive No. 2, No. 7, No. 208, No. 212 . .62 Reducing rate of formation of insoluble residue in fuel oils and reducing filter clogging. Gasoline Antioxidants....................................... 62, 63 Reducing formation of gum andprecipitation of lead in gasoline. Gasoline Colors...............................................................63 Imparting identifying colors to gasolines. "Hexalin" Cyclohexanol.................................................. 73 Intermediate for lube oil additives. "Hitec" Heat Transfer Salt.......................................... .17 Heating and cooling liquid. Hydroxyacetic Acid...................................... Oil well emulsion breakers. 73 "Hytrol" O Cyclohexanone.............................................. 73 Lube oil additive. Jet Perforators................................................................... 17 Explosive devices for perforating of oil well casings. "Loroi" Fatty Alcohols...................................................... 73 Intermediate for preparation of lubricating oil additives. Lube Oil Additive 564 ................................................... 63 Providing detergency for motor oils under low-tempera ture stop-and-go driving conditions and improving viscosity index. "Lucite" Acrylic Resin (Molding Powders)........................ 75 Water cooling towers. Metal Deacfivators No. 2, No. 3..................................... 63 To improve storage stability of petroleum distillates. 131 DUP210010762 INDUSTRIES SECTION Methylene Chloride.................................................................... 7 Dewaxing lubricating oils; dewaxing oil wells. "Mylar" Polyester Film......................................................... 39 Laminated to aluminum foil or papers (kraft or asbestos) to form a moisture and chemical resistant construction for protecting thermal insulation and other equipment; base for pressure sensitive tapes that resist chemical attack. Neoprene .................................................................... 4 Synthetic rubber base for oil well packers, oil hose and other products requiring great resistance- to petroleum and its derivatives. Nitrobenzene................................................................... 17 Solvent in purification. "Ortholeum" 300 Grease Stabilizer................................. 63 Stabilizing greases. "Ortholeum" 162 Lubricant Assistant............................. 63 Improving film strength and imparting rust-preventive properties to mineral oils. Perchlorethylene................................................................. 8 Fuel oil additives. Phenothiazine................................................................... 46 Antioxidants for lubricants. Phenyl-alpha-Naphthylamine..........................................63 Phenyl-beta-Naphthylamine..............................................63 Antioxidant for greases and lubricating oils. Potassium Nitrate N.F......................................................... 46 Heat transfer salts. Rust Preventive No. 2...................................................... 62 Added to petroleum distillates to reduce rusting and engine stalling. Seismo-Writ Recording Paper..........................................67 Seismographic field recording in oil exploration. Sodium................................................................................ 11 Tetraethyl lead; desulfuring petroleum products. Sodium Carboxymethyl Cellulose................................... 18 Oil well drilling muds. Sodium Nitrite................................................................... 18 Heat transfer salts. Sodium Phosphate--Di..................................................47 Water softening; treating boiler feed water. Sulfamic Acid................................................................... 48 Scale removal from heat exchangers, condensers, compres sor jackets, piping, etc. Sulfur.............................................................................48,50 Sulfur dioxide and sulfuric acid for bleaching and refining petroleum; high pressure lubricating oils; cutting oils. Surface Active Agents.................................................. 112 Oil well acidizing. Tetraethyl Lead Compounds..........................................63 Increasing octane number of aviation and motor fuels. Titanium Metal...............................................................71 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Titanium Pigments . . .................................................. 71 "Ti-Pure" titanium dioxide and "Ti-Cal" titanium calcium pigment as prime hiding white pigments for paints, var nishes and lacquers. 132 Trichlorethylene . ............................................................. 8 Diluent for cutting oils, heavy lubricants and hydraulic fluids; dewaxing solvent for oil wells. Urea, Crystal and Shotted..............................................74 Extractive crystallization of hydrocarbons in petroleum refining. Weed Killers...............................................................51,54 Specific attack on weeds for pipe line right-of-way main tenance. 7 4"l>wJ IC~.Ii" 11 JIVI) n11~79_11:,,1 (Molding and Extrusion Powders)..................................... 76 Rod guides; tubing. Public and Private Utilities and Institutions "Alathon" Polyethylene Resin......................................... 75 Insulation for weatherproof line wire and other electrical uses. Aluminum Ammonium Sulfate......................................... 41 Clarifying agent in filtration of small water supplies, swim ming pools, etc.; boiler feed water treatment. Brush Killers........................................................................51 Specific attack on brush for right-of-way maintenance. Caicium Stearate...............................................................43 Waterproofing agent in cement and concrete. Cellulose Sponge and Sponge Yam..................... 27, 40 General cleaning. Chloroform..........................................................................7 Disinfectant; laboratory solvent. "Combo" Synthetic Sponge..............................................40 General cleaning. Copper Sulfate................................................................... 43 Algaecide in treatment of potable waters, swimming pools, etc. Copperas (Iron Sulfate or Ferrous Sulfate).................... 43 Boiler feed water treatment for removal of silica; water purification. Detergents................................................................. *18,47 "Eivacet" Polyvinyl Acetate Emulsion............................. 12 Waterproofing foundations; paint vehicle. "Fabrilite" Vinyl Upholstery..........................................19 Fluoroscopic Screens...........................................................66 Medical diagnostic use. Formaldehyde............................................................ 9, 10 Germicide; deodorant. "Freon" Solvents............................................................... 61 Fungicides........................................................................103 Specific attack on fungi attacking flower bushes, hedges, etc. "G B S" Globular Sodium Bisulfate.................................44 Cleaning toilet bowls, sanitary ware, flooring, etc. Insecticides....................................................................... 50 Specific attack on insects. "Lucite" Acrylic Resin (Molding Powders)........................ 75 Lighting fixtures and diffusers; glazing. "Ludox" Colloidal Silica.................................................. 45 Increasing hardness and slip resistance in emulsion floor waxes; anti-soil treatment of carpets and painted surfaces. DUP210010763 INDUSTRIES SECTION Medical X-ray Film............................. Medical diagnostic use. 65 Methylene Chloride.............................................................7 Laboratory solvent. Motion Picture Film...........................................................64 Record purposes. "Qxone" MonopersulfateCompound............................... 11 Stain remover for plastic ware. Neoprene Synthetic Rubber................................................4 Base for wire and cable protective jackets. Perehiorethylene................................................................. 8 Spotting agent; cold cleaner; heat transfer agent in mois ture analyses. "Perdox" Sodium Borate Perhydrate............................. 11 Stain remover for plastic ware. Photographic Chemicals . ....................................... 66, 69 X-ray diagnosis and record purposes. Photographic Films................................................... 66, 67 Record purposes. Photographic Papers.......................................................67 Record purposes. "Rug Anchor" Rug Underlay..........................................20 Preventing rugs from slipping. Sodium Carbonate--Anhydrous..................................... 47 Soda-lime softening of water; pH control in alumclarifica tion of potable waters; pressure and foam typefire extin guishers; general cleansing agent and detergent. Sodium Metasilicafe...........................................................47 Water softener and cleaning compound. Sodium Perborate Tefrahydrate......................................11 Bleaching agent in powdered cleansers; stainremover for plastic dishware. Sodium Phosphate--Di. .................................................. 47 Water softening and boiler feed water treatment, Sodium Silicate................................................................. 48 Treatment of water to prevent corrosion ofpipe lines, boiler tubes, etc. "Tontine" Washable Window Shade Cloth.................... 20 Trichlorethylene................................................................. 8 Spotting agent; cold cleaners; laboratory solvent. "Velvetex" Vinyl Clad Foam Rubber Cushioned Floor Covering................................................................... 20 Weed Killers........................................................ 51,54 Specific attack on weeds for right-of-way maintenance. X-ray Intensifying Screens.............................................. 66 Medical diagnosis. Pulp, Paper and Paper Products Industries Acetate Film . Window cartons and window envelopes. 38 Adhesives No. 60, No. 77, No. 78, & No. 78X . , Weatherproof adhesives for laminated paperboard. 41 "Alafhon" Polyethylene Resin...............................................75 Coatings for paper and paper products. Aluminum Complex 101--Technical......................42 Water repellent and sizing agent; for insolubilizingvarious water soluble and swellable coatings. Aluminum Sulfate....................................................42 Precipitation of rosin in paper sizing; pH and pitch control in unsized ground wood newsprint and absorbent paper manufacture; satin white coating pigment and special sizes; water purification. Ammonium Sulfamate and Ammonium Sulfate... 42 Fire resistant compositions. "CM" Flame Retardant............................................... 43 "Dacron" Polyester Fiber.................................................. 84 Specialized papers, papermakei's dryer felts. Diatomaceous Earth...........................................................43 Titanium dioxide extender; improve drainage and increase drying rate; bulking agent; pitch and slime control. Dyes.........................................................................55, 56 Coloring paper and paper products. "Elvacet" Polyvinyl Acetate Emulsion............................. 12 Grease-proof coating and sizing; binder; surface coatings; increasing wet strength; adhesive. "Elvanol" Polyvinyl Alcohol.............................................. 12 Paper size for increasing strength; top size on paperboard for high gloss printing; grease-proof coating and sizing; adhesive. Flame Retardants............................................... 42, 43, 49 Treatment of paper, paper products, cellulosics. Formaldehyde............................................................ 9, 10 Hardening agent for proteins for coated paper and blue print paper; wet-strength paper; disinfectant and preserva tive. Formamide........................................................................73 Hydrolysis of pulp. Hexamethylenetetramine...................................................10 Hardening agent for proteins for coated paper. Hydrogen Peroxide........................................................... 10 Bleaching wood pulps; de-inking waste paper. "Hytrol" O Cyclohexanone..............................................73 Solvents for resins in paper coating. "Lignasan" X Fungicide.................................................. 45 Slime control in white waters; pulp preservation; preserva tive in starch adhesives and paper sizes. "Lorol" Fatty Alcohols...................................................... 73 Anti-foam agent. "Ludox" Colloidal Silica.................................................. 45 For frictionizing bags, cartons and boxes to impart anti slip characteristics; as a precoat or coating additive in coated papers. Magnesium Sulfate.......................................................... 45 Paper sizings; stabilizer in peroxide bleaching of wood pulp. Mineral Adhesive Solution--Technical.............................45 Bonding metal foil to paper. "Mycoban" Calcium Propionate..................................... 73 Non-toxic mold inhibitor. "Mycoban" Sodium Propionate..................................... 74 Non-toxic mold inhibitor. "Mylar" Polyester Film.................................................. 39 Laminating to papers and box board for reuse containers, grease and moisture-proof resistance, decorative surface; tympan paper; windows in cartons and envelopes. Station- 133 DUP210010764 INDUSTRIES SECTION ary supplies such as file folders, divider sheets, page pro tectors and index cards. Neoprene Latices................................................................. 4 Additives for pulp to make paper having wet strength, chemical resistance and other special properties. Nylon................................................................................ 84 Specialized papers, papermaker's dryer and wet felts, rein forced paper tapes for box and carton construction. "Orion" Acrylic Fiber...................................................... 84 Specialized papers. Paper Lacquers................................................................... 29 To give gloss, grease-, oil-, heat-, and moisture-resistance, and heat sealing properties. Paraformaldehyde........................................................... 10 Hardening agent for proteins for coated paper; wet-strength paper; disinfectant and preservative. Perchlorethylene................................................................. 8 Solvent for waxes and resins for sizing and coating papers; solvent for removing wax and pitch; solvent in waxed paper adhesives. Pigments, Ceramic............................................................. 6 For coloring paper and paper products. Pigments, Colored........................................................................ 70 Beater coloring and coating paper. "Quilon" Chrome Complex.............................................. 46 Water repellent and sizing agent; anti-blocking or release agent; insolubilizing various water soluble or swellable coatings. Salt Cake............................................................................46 Sulfide coking liquor in kraft pulp preparation. Sodium Carbonate--Anhydrous..................................... 47 De-inking and pulping waste paper; pulping rags and straw; pH control in multistage bleaching of pulp; cleaning rags; rosin and casein sizes; soda pulp. Sodium Carboxymethyl Cellulose......................................18 Surface sizing and beater additive. Sodium Hydrosulfite...........................................................56 Bleaching ground-wood pulp. Sodium Hyposulfite...........................................................48 Antichlor in bleaching pulp and paper; pitch controlling agent. Sodium Peroxide............................................................................. 11 Bleaching wood pulps; de-inking waste paper. Sodium Phosphate--Di...................................................... 47 Casein paper coatings; special pulps for absorbent paper and tissues; treating boiler feed water. Sodium Pyrophosphate...................................................... 47 De-inking paper stock; thinning clay slip for paper coating. Sodium Silicate................................................................... 48 Beater sizing; adhesive for solid fiber and corrugated paper board; stabilizer in peroxide ground wood bleaching; grease-proofing paper; de-inking waste paper stock; dispers ing clay coating and filling stock. Sodium Sulfide................................................................... 48 Sulfide control in kraft pulping; bleached straw pulp; cook ing flax in manufacture of cigarette paper. 134 Sodium Sulfite.................................................................................. 48 Antichlor in bleaching; cooking liquor in semi-chemical pulping; chestnut chip. 5ulfamic Acid.................................................................................. 48 Cleaning of felts and wire screens; amine sulfamates for paper softeners and flame retardants. Surface Active Agents..............................................................112 Wetting; scouring; dispersing; emulsifying; surface tension reducing; detergents. Tetrahyd'rofuran..............................................................................10 Solvent for resins in coating paper. "Ti-Pure" Titanium Dioxide........................................................ 71 Brightening and opacifying paper in wet end or in coating. Titanium Metal.............................................................................71 Structural metal and alloy ingredient where lightness, strength and corrosion resistance are required. Trichlorefhylene ................................................................................ 8 Solvents for waxes and resins for sizing and coating papers; solvent for wax and pitch removal; solvent in waxed paper adhesives. Urea, Crystal and Shotted........................................................ 74 Urea-formaldehyde resins for imparting wet strength and as binders for clay coatings; softener or plasticizer for glassine paper and similar products; ingredient of flame retardant compositions. "Volan" Bonding Agent............................................................. 49 For improving the bond strength between paper and resin in paper-based laminates. "X-12" Flame Retardant............................................................. 49 Flame retarding agent for paper products. Zinc Ammonium Chloride............................................................. 49 Flame- and rot-retarding agent in building paper. Zinc Chloride.................................................................................. 49 Vulcanized fiber; de-fibering old parchment paper. "Zoron" WS Resin Finish............................................................. 59 Wet strength resin for paper. "Zytel" Nylon Resin (Soluble Resin)........................................ 76 Coatings for paper. Rubber and Plastics Industries Accelerators for Natural and Synthetic Rubber . . . 1,2 Adipic Acid....................................................................................72 Ester-type plasticizers for synthetic resins including poly vinyl chloride, polyvinyl acetate, polyvinyl butyral, and cellulose acetate; polyester resins including modified alkyds for finishes and wire enamels. "Adiprene" C Urethane Rubber...................................................4 For products that must have exceptional abrasion resist ance, high tensile strength and low temperature brittle paint. "Adiprene" L Liquid Urethane Rubber......................................4 For products that must have excellent resistance to abra sion, oxidation and ozone. . "Alafhon" Polyethylene Resin...................................................75 Electrical insulation and otherelectrical parts; extruded coatings; sheeting and film; ice cube trays; toys; bowls; tumblers; flexible molded bottles; pipe and tubing; closures; miscellaneous molded products. ]i INDUSTRIES SECTION Aluminum Sulfate...........................................................42 Coagulating synthetic rubber latex; water clarification; casein hardening. Ammonium Chloride...........................................................42 Resinifying or hardening agent for liquid phenolic and urea formaldehyde resins; gelling agent in sponge rubber. Ammonium Sulfamate...................................................... 42 Flame retardant in regenerated cellulose film. AwirscnlufT? Sulfsts ........................................................... 42 Latex coating of textile fiber or cloth. Antioxidants for Natural and Synthetic Rubber ... 2 Improve the aging and service life of natural and synthetic rubbers. "Butacite" Polyvinyl Butyral Resin (Flake and Sheeting)...................................................... 75 Interlayer for safety glass; adhesives; flexible coatings and impregnants for cloth. Calcium Stearate............................................................... 43 Mold lubricant in plastics. Chloroform .......................................................................... 7 Solvent for cellulose acetate (used in film coating). Colors............................................................................ 138 Pigmentation. "Dacron" Polyester Fiber.................................................. 84 Reinforcing for V-belts, municipal and industrial fire hose; reinforcing for plastic laminates. "Delrin" Acetal Resin (Molding and Extrusion Powder)............................................................................75 Automotive parts such as interior hardware, bushings and bearings for suspension and steering linkages, squirrel cage blowers, gears, instrument clusters, fuel pump and carbu retor parts; electrical components; pump impellers; hous ings and cover plates; showerheads; cutlery handles; tumblers; pen parts; appliance transmission gears; combs; various extruded articles and shapes; tubing (control cable sheathing); coated wire; laminated paper; sheeting; pipe and blow molded aerosol bottles. Diglycoiic Acid................................................................... 72 Resins and plasticizers. Dimethyl Formamide...................................................... 43 Solvent for resins. Dimethyl Terephthalate.................................................. 17 Plasticizer intermediate. Dimethylamine ...............................................................43 Intermediate for rubber accelerators. Diphenylamine ............................................................... 17 Antioxidant in rubber chemicals. "Elvacet" Polyvinyl Acetate Emulsion............................. 12 Binder; protective coating; asphalt-proof base coat for linoleums. "Elvanol" Polyvinyl Alcohol.............................................. 12 Binder; protective coating; emulsifying agent; thermo-set ting resin modifier; thickener for latices. Emulsifying Agents...................................................... 101 "Fabrikoid" Pyroxylin Coated Fabrics............................ 20 Tire liners; rubber adhesion preventive. "Fairprene" Synthetic Rubber Coated Fabrics .... 20 Tank linings; diaphragms; gaskets; packings; protective covers. "Fairprene" Synthetic Rubber Sheet Stocks.................... 20 Tank linings; gaskets; packings. Formaldehyde............................................................9, 10 Phenolic, urea, and melamine resins; rubber accelerators; hardening agent for casein plastics and adhesives, resorcinol adhesives, etc.; preserving and neutralizing rubber latex. Formic Acid....................................................................... 44 Coagulating natural latex to obtain crude sheet rubber. "Freon-113" Fluorinated Hydrocarbon.............................61 Intermediate for chlorotrifluoroethylene. "Freon" Solvents...............................................................61 Motor degreasing. "Hexalin" Cyclohexanol.................................................. 73 Plasticizers. Hexamethylenetetramine .............................................. 10 Curing agent for phenolic plastics; neutralizing agent; rub ber accelerator. Hydrogen Peroxide...........................................................10 Foam rubber; polymerization catalyst; oxidizing agent. "Hylene" Organic Isocyanates............................................3 Manufacture of urethane foams, finishes, adhesives and rubbers. "Hypalon" Synthetic Rubber........................................... 4 Synthetic rubber used in manufacture of products which are oil resistant, unattacked by ozone, and which have excel lent color stability and resistance to degradation by heat, weather and chemicals. "Hytrol" O Cyclohexanone..............................................73 Solvent for polyvinyl chlorides and copolymers. Lactic Acid................................................................ 44, 45 Neutralizing agent in the production of cast phenol-formal dehyde plastics. "Lorol" Fatty Alcohols...................................................... 73 Intermediates for polymerization modifiers used in syn thetic rubber manufacture; intermediates for plasticizers. "Lucite" Acrylic Resin Dental Materials........................ 75 Manufacture of dentures, teeth, crowns, inlays. "Lucite" Acrylic Resin (Molding Powders).................... 75 Automotive parts; combs and brush backs; costume jewelry; crystals for clocks and watches; displays; household items; hearing aids; lenses; signs; lighting fixtures and diffusers. "Ludox" Colloidal Silica..................................................45 As a reinforcing agent in Latex foam; for compounding latex products to improve modulus and abrasion resistance; modifying latex adhesives for improved bond strength. Methyl Chloride.................................................................7 Synthetic rubber; synthesis of silicones. Methylene Chloride............................................................ 7 Solvent for rubber base cements, synthetic resin glues, cellulose acetates (used in film casting); secondary refrig erant for solvent recovery in film casting operations. Mixed Acid........................................................................17 Nitrating of cellulose. "Mylar" Polyester Film...................................................... 39 Tough, stain resistant surface on plastic materials used in decorative applications; release sheet in curing operations. 135 DUP210010766 INDUSTRIES SECTION Neoprene .......................................................................................... 4 Chemical rubber used in manufacture of products designed to withstand action of oils, solvents, heat, oxidation and sunlight; products with low permeability to gases and those not having flame propagating properties. Nylon.................................................................................................. 84 Reinforcing for conveyor belts; reinforcing for plastic laminates; base fabric for coated protective covers; tires; fuel cells; reinforcement for hydraulic hose. "Orion" Acrylic Fiber...................................................................84 Reinforcing for plastic laminates. Paraformaldehyde........................................................................ 10 Phenolic, urea and melamine resins; rubber accelerators; hardening agent for casein plastics and adhesives, resorcinol adhesives, etc.; preserving and neutralizing rubber latex. Perchlorethylene................................................................................8 Solvent for rubber latex and silicone resins. Pigments, Ceramic...........................................................................6 For dyeing plastics. Propionic Acid.................................................................................. 74 Intermediate for vinyl propionate polymers; ester plas ticizers. Rubber Chemicals........................................................................ 110 Accelerators; antioxidants; blowing agents; bonding agents; dispersing agents; miscellaneous chemicals; mold lubri cants; peptizing agents; rubber dispersed colors. "Rulcin" Flame-Retardant Plastic for Electrical Insulation.................................................................. 76 Insulation of wire and cable; extruded tapes; injectionmolded electrical parts. Silver Preparations.......................................................................... 6 Printed circuits; solder seal; static shielding; electroplating base. Sodium Bicarbonate........................................................................47 Blowing agent in cellular rubber production; miscellaneous mild neutralizing agent. Sodium Cyanide 96%...................................................................11 Acrylic resins; rubber chemicals. Sodium Sulfocyanide.............................................................. 12 Rubber accelerator. Sulfamic Acid.............................................................................. 48 Inorganic acid curing agent or catalyst for resin polymeriza tion. Sulfur.........................................................................................48, 50 Vulcanizing agent in natural and synthetic rubber; plastic cement; synthetic rubber. "Super Cordura" Rayon............................................................. 84 Reinforcing for conveyor belts, tires, hose and V-belts. "Teflon" TFE-Fiuorocarbon Resin............................................. 76 Gaskets; packings; chemical equipment components; elec trical insulation; manufacturing equipment where nonsticky surface is needed. Terephthalic Acid............................................................................. 18 Plasticizer intermediate. Tetrahydrofuran............................................................................. 10 Solvent for polyvinyl chlorides and vinylidene chloride copolymers. "Ti-Pure" Titanium Dioxide........................................................71 Whitening and opacifying rubber and plastics. Trichlorethylene................................................................................8 Solvent for rubber latex; silicone resins; polyvinyl acetate glues. "Tynex" Nylon Filament.................................................. 76 Fishing leaders and lines; level bristles for household and industrial brushes; musical and racket strings; tapered bristles for paint brushes; wigs for dolls and mannequins. "Unicel" ND and "Unicel" S Blowing Agents . . . 3, 18 Blowing agents to produce open or closed cell sponge from elastomers and polyvinyl chloride. Urea, Crystal and Shotted........................................................ 74 Urea-formaldehyde resin molding compositions; blowing agent for porous articles. Vinyl Acetate.................................................................................. 12 In manufacture of polyvinyl acetate, polyvinyl alcohol, polyvinyl butyral, polyvinyl formal, and vinyl chloride-- vinyl acetate copolymers. Sodium Dimethyl Dithiocarbamate........................................ 47 Rubber accelerator. Sodium Nitrite...................................................................................18 Oxidizing agent in production of benzothiazol disulfide and tetramethylthiuram disulfide; vulcanization accelera tors; short stop in cold rubber polymerization. "Viton" Synthetic Rubber................................................................5 For products that must withstand unusually high tempera tures in air, chemicals or most liquids. "Zelec" Durable and Non-Durable Antistatic Agents . 59 Preventing accumulation of dirt due to static attraction on finished plastic products. Sodium Perborate Tetrahydrafe.............................................. 11 Polymerization catalyst. Zinc Chloride.................................................................................. 49 Removing cellulose in reclaiming synthetic rubber. Sodium Peroxide............................................................................ 11 Polymerization catalyst. Zinc Stearate..................................................................................49 Anti-sticking agent for crude butyl rubber and other syn j Sodium Phosphate--Di............................................................47 Boiler feed water softening. thetic rubbers; increasing water resistance of latex; mold lubricant; accelerator activator in vulcanization. Sodium Silicate................................................................................ 48 Calcium silicate rubber reinforcing filler; stabilizing high zinc oxide content latex emulsions; lead silicate stabilizer in vinyl chloride resin; sizing tire cord; product packaging adhesives. Sodium Silicofluoride............................................................... 48 Gelling agent in making latex foam sponge rubber. Sodium Sulfate......................................................................... 48 Dyeing rubber thread. "Zyfel" Nylon Resin (Molding and Extrusion Powders)........................................ 76 Machine parts such as gears, cams, bearings, bushings, rollers; coil forms; wire and cable covering; insulating coating; automotive door lock mechanisms and dome light lenses; combs and other steriiizable items. "Zytel" Nylon Resin [Soluble Resin)........................................ 76 Coatings; textile finishes; adhesives; moldings; hydrocarbon barrier in fuel cells. DUP210010767 INDUSTRIES SECTION Soaps, Detergents and Allied Products industries Aluminum Sulfate....................................................... 42 Clarifying agent in purification of glycerin, fats, and oils; aluminum soaps; precipitant for sewage and waste disposal. Chlorosulfcnic Acid........................................................43 Sulfation of alcohols. Dimethyiamine.................................................................. 43 Intermediate for quaternary ammonium compounds. "Elvacet" Polyvinyl Acetate Emulsion............................. 12 Home laundry finishes; nylon hosiery rinse. Fluorescent Whites (See "Pontamine" Whites] .... 56 Whitening agents for soaps. Formaldehyde............................................................9, 10 Deodorant; disinfectants. "Freon" Solvents...............................................................61 Degreasing and extraction agents. "G B S" Globular Sodium Bisulfate.................................44 Compounded toilet bowl and household cleaners. "Hexalin" Cydohexanol..................................................73 Stabilizer and homogenizer for soap and synthetic detergent emulsions. Hydrogen Peroxide............................. Bleaching fats and oils. 10 Hydroxyacetic Acid.......................................................... 73 Cleansing agents for dairy equipment. "Lorol" 5 Fatty Alcohol--Technical Lauryl.................... 73 Intermediate for synthetic detergent and emulsifying agents. "Ludox" Colloidal Silica..................................................45 As an anti-soil component in household rug shampoo. Magnesium Sulfate.......................................................... 45 Soap products; compounded detergents; bath salts. Monomethylamine.......................................................... 45 Intermediate for surface active compounds. "Ocenol" Technical Oleyl Alcohol................................. 59. Intermediate for synthetic detergents and emulsifying agents. "Oxone" Monopersulfate Compound.............................11 Home laundry bleach; detergent-bleach washing com pounds; scouring powders; stain remover for plastic ware. Perchlorethylene................................................................. 8 Dry cleaning detergents. "Perdox" Sodium Borate Perhydrate.............................11 Home laundry bleach; stain remover for plastic ware. "Pontamine" Whites...................................................... 56 Whitening agents for use with soap. Sodium ............................................................................ II Reducing agent in production of fatty alcohols from glycerides. Sodium Carbonate--Anhydrous..................................... 47 Builder in bar, flake, powder and other soap products; compounded alkaline detergents; water softeners and scour ing compounds; saponifying fats and oils; soaps. Sodium Carboxymethyl Cellulose..................................... 18 Soil suspending agent for synthetic detergents; thickening agent; dispersant. Sodium Metasilicate...........................................................47 Soap builder; detergents and cleaning compounds; repack aged as cleaner for food processing; dairy, packing house and other industrial plants. Sodium Perborate Teirahydrafe..................................... 11 Home laundry bleach; floor cleaning compounds; bleach :_ xjug, iaLc * Sodium Peroxide............................................................... 11 Bleaching agent. Sodium Phosphate--Di...................................................... 47 Compounded detergents; repackaged for water softening and as a mild detergent; boiler feed water treatment. Sodium Phosphate--Tri.................................................. 47 Bottle washing, industrial cleaning compounds. Sodium Silicate. . ........................................................... 48 Granulated, flake and bar soaps and detergents; com pounded cleaners; paint and varnish removers; boiler compounds. Sodium Tripolyphosphate.................................................. 48 Detergent, washing compounds, water softening. Sulfamic Acid................................................................... 48 Sulfation and sulfonation agent. Surface Active Agents...................................................112 Wetting; scouring; dispersing; emulsifying; surface tension reducing; detergents. "Ti-Pure" Titanium Dioxide..............................................71 Whitening and opacifying soap and allied products. Trichlorethylene................................................................. 8 Extraction of fats and oils; cleaning mixtures and emul sions; rug cleaners. Urea, Crystal and Shotted.................................................. 74 Solubilizing agent and extender in synthetic detergents. Tanning Industry Aluminum Ammonium Sulfate......................................... 41 Alum tanning of white leathers, furs, lace and rawhide leathers. Aluminum Complex 101--Technical.................................42 As a treatment during tanning to impart water repellency and chemical resistance to leather. Aluminum Potassium Sulfate......................................... 42 Alum tanning of white leathers and furs. Aluminum Sulfate...............................................................42 Alum tanning for rawhide, sheepskin and white leathers. Ammonium Chloride...................................................... 41 Deliming and bating skins. Cements............................................... 27 Colors................................................................................ 99 Coloring leathers. Dimethyiamine ...............................................................43 Dehairing agent. Dyes......................................................................... 55, 56 Dyeing leathers. 137 DUP210010768 INDUSTRIES SECTION "Elvacet" Polyvinyl Acetate Emulsion............................. 12 Sodium Cyanide 96%............................................................... 11 Base adhesives for leather; leather finishes; binder for scrap Unhairing of hides. leather. Sodium MeJabisulfife............................................................... 47 "Elvanol" Polyvinyl Alcohol..........................................12 Solubilizing quebracho extract in vegetable tanning; bleach i Base adhesives for leather; leather finishes; binder for scrap ing leathers and stock for white tannage; reducing agent II;; leather. Ferrous Sulfate (Copperas)..............................................43 for bichromate in chrome tanning; deliming agent; soaking sheep skins prior to wool pulling. Mordanting and dyeing furs. Sodium Sulfate.................................................................... 46, 48 Formaldehyde............................................................9, 10 Loading leather; pigmenting white leathers. Tanning agent for white leather and sole leather; manu Sodium Sulfide..........................................................................48 facture of mouton fur; hardening agent for proteins for Dehairing hides; depilatory in wool pulling. leather finishes; disinfectant. Sodium Thiosulfate............................................................... 48 Formic Acid........................................................................44 Reducing agent in second bath of two-bathchrometanning Deliming and dyeing leathers and furs. process for kid skins and light leathers. "G-942" Tanning Agent..................................................44 Tanning lightweight skins to produce white, colored and specialty leathers. Surface Active Agents...................................................... 112 Wetting; scouring; dispersing; emulsifying;surfacetension reducing; detergents. Hydrogen Peroxide........................................................... 10 Bleaching of furs and hides; fur carroting. Tetrahydrofuran.....................................................................10 Solvent in leather finishes. Hydroxyacetic Acid...........................................................73 Bating, dehairing, deliming and plumping hides. "Ti-Pure" Titanium Dioxide................................................ 71 Whitening agent for leather. "Hytrol" O Cyclohexanone..............................................73 Solvent in leather finishes. Lactic Acid................................................................ 44, 45 Deliming, drenching and plumping; pH control of vege table tanning liquors. Trichlorethylene...................................................................... 8 Solvent in leather finishes; leather,sheepskin, and fur cleaners. "Zoron" TR Polymer Emulsion...........................................59 Seasoning base for glossy top leather finishes. Leather Processing Agents.............................................. 104 "Lucife" Acrylic Resin (Methacrylate Polymers) . . .75 Impregnants for leather; ingredients of leather finishes. Magnesium Sulfate...........................................................45 Filling agent for sole and other heavy leathers. "Mylar" Polyester Film..................................................39 Lamination to leather goods for scuff resistance and up grading of inexpensive leathers. Nitrocellulose....................................................................17 Leather dopes. p-Nitrophenol Mold inhibitor for leathers. Paraformaldehyde........................................................... 10 Tanning agent for white leather and sole leather; harden ing agent for proteins used in leather finishes; disinfectant. Perchlorethylene . . . . ................................................8 Solvent in leather finishes; cleaners for leathers and furs. Pigments............................................................ 60,70,71 Pigmenting leathers. "Quilon" Chrome Complex..............................................46 Producing water repellent, dry-cleanable garment leather, and chemical and water resistant shoe upper leather. Sodium Bicarbonate...........................................................47 Controlling acidity and pH in chrome tanning; mild alkali for tanning and finishing. Sodium Bichromate.......................................................... 47 Source of chromium in one- and two-bath chrome tanning. Sodium Carbonate--Anhydrous..................................... 47 Neutralizing acidity and pH control in chrome tanning; cleaning vegetable tanned leather for bleaching; wool scouring. Textile Industry Acetate Yarn....................................................................................84 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics. Major End Uses: Men's and Boys' Apparel: Suits and slacks, jackets, sport shirts, linings, neckties. Women's and Misses' Apparel: Dresses, underwear, nightwear, swimsuits. Children's and Infants' Apparel: Dresses, underwear, nightwear. Home Furnishings: Piece goods, draperies, curtains, upholstery, bedspreads. Industrial: Electrical insulation. "Alathon" Polyethylene Resin................................................... 75 Coating fabrics. Aluminum Chloride........................................................................41 Carbonizing of woolen piece goods. Aluminum Complex 101--Technical........................................ 42 Water repellent and sizing agent for textiles. Ammonium Suifamate...................................................................42 Flame retardants for textiles. Ammonium Sulfate........................................................................ 42 Buffer and exhausting agent in sulfurdyeing of cottons; stripping agent for dyed woolens. Bleaching Agents............................................................................. 97 Bleaching fibers and fabrics. "Butacite" Polyvinyl Butyral Resin (Flake).........................75 Impregnant and coating for cloth. Chloroform.......................................................................................... 7 Dry cleaners' spotting agent. 138 DUP210010769 INDUSTRIES SECTION "CM" Flame Retardant............................................... 43 Flame retardant with after-glow preventives for textiles. "Dacron" Polyester Fiber............................................... 84 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Uses: Men's and Boys' Apparel: Suits, coats, slacks, shirts. Women's and Misses' Apparel: Dresses, blouses, under wear, nightwear, washable service apparel. Home Furnishings: Curtains, piece goods, stuffing mate rials, draperies, casement cloths. Industrial: Sewing thread, reinforcing for V-belts, fire hose, rope, reinforcing for plastic laminates, filtration fabrics and felts, flatwork ironer covers, webbing, para chutes, papermaker's felts, shoe fabrics. Dig lycolic Acid................................................................... 72 Dyeing of wool. Dyes ......................................................................... 55, 56 "Elvacet" Polyvinyl Acetate Emulsion.............................12 Finish for cotton; non-woven fabric binder. "Elvanol" Polyvinyl Alcohol.............................................. 12 Size for synthetic fibers; modifier for thermosetting and natural resin finishes; nonwoven fabric binder. "Fabrikoid" Pyroxylin Coated Fabrics.............................20 Belts; luggage linings; card table covers; motion picture screens; sporting goods; etc. "Fabriliie" Unsupported Vinyl Material.........................19 Handbags; pocketbooks; notebooks. "Fabrilite" Vinyl Coated Fabrics......................................19 Upholstery, shoe uppers, luggage, motion picture screens, table cloths. "Fairprene" Industrial Cements..................................... 20 Cementing combination for "Fairprene" synthetic rubber sheet stock, "Fairprene" synthetic rubber coated fabrics, rubber, leather, fabrics, paper, metal, wood. "Fairprene" P.A.W. Tape {Protective and Waterstop) . 20 Seam sealant for oil-, air-, and water-tight structural joints. "Fairprene" Synthetic Rubber Coated Fabrics .... 20 Special industrial applications requiring resistance to oil, chemicals, heat, cold, flame, abrasion, flexing and sunlight. "Fairprene" Synthetic Rubber Sheet Stocks....................20 Special industrial applications requiring resistance to oil, chemicals, heat, cold, flame, abrasion, flexing and sunlight. Formaldehyde............................................................ 9, 10 Crush-proofing chemicals; textile finishing chemicals; siz ing; dye assistant; disinfectant. "Freon" TF Solvent...........................................................61 Spotting agent and solvent for extractables. Hydrogen Peroxide...........................................................10 Bleaching cotton, wool, silk, rayon, linen and blends of natural and synthetic fibers; bleaching vegetable and animal fibers; oxidation of dyes. Hydroxyacetic Acid...........................................................73 Dyeing of wool. "Hyfrol" O Cyclohexanone..............................................73 Solvent. "Lerol" Fatty Alcohols.................................................................. 73 Intermediates for textile finishing and softening agents. "Lucite" Acrylic Resin (Methacrylate Polymers) ... 75 Coating for fabrics. "Ludox" Colloidal Silica--Technical................................... 45 Anti-slip treatment of rayon; strengthening rayon, cotton and wool yarns; anti-soil treatment of pile fabrics. Methylene Chloride.......................................................................... 7 Solvent for cellulose acetates; spotting agent. "Mylar" Polyester Film.................................................................. 39 Decorative yarn; laminated to aluminum foil or metallized and laminated to itself; for metallic yarn; packaging; ap parel stays. "Nalan" RF Water Repellent................................................... 58 Softener modifier for thermosetting resins used to produce crease resistance and wash-and-wear properties on cotton fabrics. Nylon Fiber........................................................................................84 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Uses: Men's and Boys' Apparel: Suits, slacks, jackets, under wear, socks, linings. Women's and Misses' Apparel: Dresses, blouses, under wear, hosiery, lace, sweaters. Children's and Infants' Apparel: Coats, dresses, sweaters, underwear, socks. Home Furnishings: Rugs and carpets, upholstery, cur tains, piece goods, narrow fabrics. Industrial: Laundry textiles (wash nets and press covers), rope, cordage, twine, fish nets and fishing lines, reinforc ing for plastic laminates, filtration fabrics and felts, webbing, parachutes, protective covers (tarpaulins, truck covers, etc.), sewing thread, papermaker's felts, shoe fabrics, seat belts. "Orion" Acrylic Fiber...............................................................84 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Uses: Men's and Boys' Apparel: Suits, slacks, sweaters, shirts, uniforms. Women's and Misses' Apparel: Sweaters, suits, skirts, coats, dresses. Children's and Infants' Apparel: Sweaters, dresses, suits. Home Furnishings: Piece goods, blankets, hand knitting yams. Industrial: Sewing thread, reinforcing for plastic lami nates, filtration fabrics and felts, auto tops, protective clothing, seat covers. "Oxone" Monopersulfate Compound....................................11 Bleaching agent. Paraformaldehyde........................................................................ 10 Textile chemicals. Perchlorethylene................................................................................8 Dry cleaning. "Perdox" Sodium Borate Perhydrate....................................11 Bleaching; oxidation of dyes. 139 DUP210010770 INDUSTRIES SECTION Pigments........................................................................ 6,70,71,83 Mass coloration of textile fibers. "PX" Pyroxylin Impregnated and Vinyl Impregnated Book Cloth..............................................................19 Washable bookbinding. "Quilon" Chrome Complex .... ................................... 46 Water repellent and sizing treatment for cellulosic mate rials; treating felt hats, wool fabrics and hydrophobic fibers. "Teflon" TFE-Fluorocarbon Fiber..............................................84 Packings, gaskets, diaphragms, filtration fabrics, bearings and felts. Tetrahydrofuran............................................................................. 10 Solvent in fabric coating. Textile Processing Agents........................................................ 113 Surface active agents; water repellents; lubricants; sizes; etc. "Rug Anchor" Rug Underlay...................................................20 Sponge rubber underlay. Sodium Bichromate........................................................................47 Chrome dyeing of cottons and woolens; developing natural dyes and aniline black prints on cotton; oxidizing vat and sulfur dyed cotton. Sodium Bisulfite.............................................................................47 Bleaching woolen piece goods; antichlor in bleaching cot tons; discharging cotton and rayon prints. Sodium Carbonate--Anhydrous..............................................47 Wool scouring and stripping; neutralizing carbonized woolens; solubilizing and developing agent in direct cotton dyeing; bleaching; printing; washing; desulfuring rayon. Sodium Carboxymefhyl Cellulose.............................................. 18 Finishing. Sodium Hydrosulfite........................................................................56 Reducing vat dyes. Sodium Hydroxide........................................................................47 Bleaching, dyeing and finishing. Textile Rayon Yarn........................................................................84 Fabrication Forms: Broad woven, narrow woven, circular knit, flat knit and non-woven fabrics; twisted and spun forms such as cordage, sewing thread, etc. Major End Uses: Men's and Boys' Apparel: Suits, slacks, jackets, shirts, socks, linings, underwear. Women's and Misses' Apparel: Suits, skirts, dresses, underwear, nightwear. Children's and Infants' Apparel: Suits, skirts, dresses, underwear. Home Furnishings: Rugs and carpets, upholstery, piece goods, curtains, draperies. Industrial: Shoe fabrics; bags; linings for boxes, caskets and luggage; medical, surgical and sanitary applications; electrical insulation. "Ti-Pure" Titanium Dioxide........................................................71 Delustering and opacifying agent for textile fibers. "Tontine" Flame-Resistant Vinyl Coated Fabrics ... 19 Use in visual aid school rooms, for stage curtains and cyclorama backgrounds in schools. Sodium Metasilicate........................................................................47 Detergent and soap builder in laundries. Sodium Perborate Tetrahydrate.............................................. 11 Bleaching; oxidation of dyes. Sodium Peroxide............................................................................. 11 Bleaching, particularly cotton knit goods. "Tontine" Washable Window Shade Cloth.........................20 Trichlorethylene................................................................................8 Dry cleaning. Urea, Crystal and Shotted........................................................74 Humectant; softener; size; weighting; urea-formaldehyde resins for creaseproofing and shrinkage control. Sodium Phosphate--Tri............................................................. 47 Wool degreasing, cotton processing. "Velvetex" Vinyl Clad Foam Rubber Cushioned Floor Covering.................................................................................. 20 Sodium Pyrophosphate.................................................................. 47 Kier boiling cotton; scouring wool and rayon; stabilizer in peroxide bleaching of wool, cotton and rayon. "X-12" Flame Retardant............................................................. 49 Renewable flame retardant treatment of cotton and rayon fabrics. Sodium Silicate.................................................................................. 48 Bleaching assistant. "Zelan" Durable Water Repellents........................................ 58 Imparting water, spot and stain resistance retained after Sodium Silicofluoride.................................... 48 repeated laundering or dry cleaning. Laundry sour. "Zelcon" C Fabric Conditioner...................................................59 Sodium Sulfocyanide................................................................... 12 Home laundering preparations. Dyeing and printing of fabrics. "Zelec" Durable and Non-Durabie Antistatic Agents . 59 Sulfamic Acid.................................................................................. 48 Processing and finishing hydrophobic fibers and fabrics. Removal of excess nitrites in developed color dyeing. "Zenoton" CR Resin Finish........................................................ 59 "Super Cordura" Rayon Yarn...................................................84 Crease- and shrink-resistant finishes for textiles. Fabrication Forms: Twisted and spun forms. Major End Uses: Home Furnishings: Backing yams for rugs and carpets. "Zeset" S Fabric Stabilizer........................................................ 59 Shrink- and crease-resistant finish for cellulose fibers. Industrial: Thread for bag closing operations, lacing "Zytel" Nylon Resin (Molding Powders)..............................76 i cords, seat belts. Mechanical parts for textile machinery, e.g. gears, cams, ! bearings, etc. Surface Active Agents..........................................................112 Wetting; scouring; dispersing; emulsifying; surface tension "Zytel" Nylon Resin (Soluble Resin)........................................ 76 reducing; detergents. Textile finishes. 140 DUP210010771 DUP210010772 diOdRAPHSCAL SiCTSOINi LOCATIONS OF OFFICES, PLANTS AND WAREHOUSES i!i Alabama Phone California (continued) Phone Birmingham Los Angeles 2000 First Avenue, Brown-Marx Bldg. (2)* Explosives Department.. Explosives Sales Section--Branch Office.....................ALpine 4-3248 Film Department--Warehouse Petroleum Chemicals Division--Addi tives--Shipping Point 2301 Fifth Avenue, South (3) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse......................... FAirfax 2-8775 Trade Sales Finishes--Warehouse. . .FAirfax 2-8775 Pigments Department--Warehouse Post Office Box 70, El Monte Electrochemicals Department-- District Office............................. Cumberland 3-2761 4300 Jefferson Avenue, S. W. "Freon" Products Division-- Warehouse............................................ ALpine 6-4103 Watson Explosives Department--Plant 2930 East 44th Street (58) _ _ Dyes and Chemicals Division-- District Office....................................... LUdlow 2-6464 Elastomer Chemicals Department-- District Office....................................... LUdlow 2-6464 Polychemicals Department--Branch Office......................................................LUdlow 2-6464 "Freon" Products Division-- Warehouse.............................................LUdlow 2-6464 Arizona Phoenix 121-23 E. Buchanan Street "Freon" Products Division-- Warehouse............................................ ALpine 3-8508 2000 South Garfield Avenue (22) Fabrics Division --Branch Office. . . .RAymond 3-8401 Finishes Division-- Automotive Finishes--Auto Manufacturers' Sales Office.... RAymond 3-8401 Automotive Refinishing Materials-- Service Warehouse.,,............... RAymond 3-8401 Trade Sales Finishes-- Warehouse. RAymond 3-8401 "7" Specialties Sales--Warehouse. RAymond 3-8401 California Antioch 612 South Flower Street, Suite 425 (17) Petroleum Chemicals Division-- Sales Office......................................MAdison 4-1354 "Freon" Products Division--Plant Petroleum Chemicals Division--Tetraethyl Lead Compounds--Plant and Shipping Point 7051 Santa Monica Boulevard (38) Photo Products Department-- District Office and Warehouse. . . HOllywood 9-5147 Berkeley 2735 San Pablo Avenue Remington Arms Company, Inc.-- Branch Office................................. THornwall 8-5514 Peters Cartridge Division-- Branch Office................................. THornwall 8-5514 Oakland Film Department--Warehouse 1020 E. Eighth Street Finishes Division-- Automotive Refinishing Materials-- Service Warehouse........................... HIgate 4-1980 Trade Sales Finishes--Warehouse.. . .HIgate 4-0634 V Burlingame 1991 Dennison "Freon" Products Division-- 1600 Trousdale Drive Warehouse........................................ PRospect 6-0270 Finishes Division-- Automotive Refinishing Materials-- Regional Office................................OXford 7-3870 Industrial Finishes--Regional Office.OXford 7-3870 Palo Alio 701 Welch Road Elastomer Chemicals Department-- Trade Sales Finishes--Regional District Office............................................. DAvenport6-7550 Office.................................................OXford 7-3870 Explosives Department, Explosives Sales Section--Branch Office.... DAvenport 6-3536 "Freon" Products Division-- El Monie District Office............................................. DAvenport6-2840 Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Grasselli Chemicals Department (Biological Chemicals) -- District Office......................................... DAvenport6-6044 142 Numbers in parentheses indicate postal zones. DUP210010773 OFFICES, PLANTS AND WAREHOUSES California (continued) Phsr.e Pasadena 325 N. Lake Avenue, 22-25 Meade Bldg. (Room 213) Pigments Department--Branch Office, . .RYan 1-7431 234 East Colorado Street (Room 426) Film Department--District Office (Industrial Sales with Converter Sales) RYan 1-9696 San Francisco Pigments Department--Warehouse 111 Sutter Street (4)* Electrochemicals Department-- District Office.....................................EXbrook 2-1158 Film Department (Packaging Sales) (Room 1018) --District Office........ EXbrook 2-0808 Petroleum Chemicals Division (Room 626)--Sales Office................. EXbrook 2-1934 Pigments Department (Room 522) -- Branch Office......................................EXbrook 2-4572 Polychemicals Department--Branch Office................................................... EXbrook 2-6230 650 Beach Street (19) "Freon" Products Division- Warehouse ........................ .PRospect 6-0270 Connecticut Fnone Bridgeport (2) Peters Cartridge Division--General Office and Plant...................................... EDison 3-1112 Remington Arras Company, Inc.-- General Office and Plant....................................EDison3-1112 Fairfield Fabrics Division--Branch Office and Plant............................................................... CLearwater9-3351 New Haven 46 River Street (13) Grasselli Chemicals Department, Industrial Chemicals--District Office. LOcust 2-5145 West Hartford (10) 635 New Park Avenue Finishes Division, Trade Sales Finishes-- Warehouse......................................................... ADams3-8297 Delaware Edge Moor Pigments Department--Plant and Warehouse South San Francisco Post Office Box 608, 160 South Linden Avenue Finishes Division-- Automotive Finishes--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Automotive Refinishing Materials--Plant Post Office Box 927 Finishes Division, Automotive Refinishing Materials--Service Warehouse..............JUno 3-0733 Torrance Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Colorado Denver 444 17th Street, Midland Savings Bldg. (2) Explosives Department, Explosives Sales Section--Branch Office......................... MAin 3-1253 Polychemicals Department (Room 613) -- Branch Office...................................... Keystone 3433 555 Quivas Street (1) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse.......................... AComa 2-8945 Trade Sales Finishes--Warehouse . . .AComa 2-8945 1700 15th Street (17) "Freon" Products Division- Warehouse , MAin 3-3221 Louviers Explosives Department--Plant Newport Pigments Department--Plant and Warehouse Seaford Textile Fibers Department (Nylon) --Plant Wilmington Pigments Department--Warehouse Du Pont Building (98) Electrochemicals Department-- General Office and Export Division. PRospect 4-1000 Fabrics Division--General Office.... PRospect 4-1000 Finishes Division-- Automotive Finishes--General Office..............................................PRospect 4-1000 Automotive Refinishing Materials-- General Office............................... PRospect 4-1000 Industrial Finishes--General Office PRospect 4-1000 "1" Specialties Sales--General Office........................................................... PRospect4-1000 Trade Sales Finishes--General Office........................................................... PRospect4-1000 Grasselli Chemicals Department-- General Office................................................ PRospect4-1000 Polychemicals Department--General Office............................................................... PRospect4-1000 Nemours Building (98) Dyes and Chemicals Division-- General Office................................................ PRospect4-1000 Elastomer Chemicals Department-- General Office................................................ PRospect4-1000 Explosives Department, Chemical and Explosives Sales Sections-- General Office................................................ PRospect4-1000 Fabrics Division--Export Sales Office............................................................... PRospect4-1000 *Numbers in parentheses indicate postal zones. 143 DUP210010774 OFFICES, PLANTS AND WAREHOUSES Delaware (continued) Phene Wilmington (cont.) Nemours Building (98) (Continued) Film Department--General Office, Main Sales, and Export Sales Office................................................... PRospect 4-1000 Finishes Division-- Automotive Finishes--Export Office............................................... PRospect 4-1000 Automotive Refinishing Materials-- Export Office..................................PRospect 4-1000 Industrial Finishes--Export Office. PRospect 4-1000 "7" Specialties Sales--Export Office............................................... PRospect 4-1000 Trade Sales Finishes--Export Office............................................... PRospect 4-1000 "Freon" Products Division--General Office................................................... PRospect 4-1000 Petroleum Chemicals Division-- General Office............................... .. . PRospect 4-1000 Photo Products Department-- General Office..................................... PRospect 4-1000 Pigments Department--General Office... PRospect 4-1000 Salvage and Reclamation Division-- General Office.....................................PRospect 4-1000 Textile Fibers Department--General Office....................................................PRospect 4-1000 Florida (continued) Phone Tampa (cont.) 101 N. 12th. Street "Freon" Products Division-- Warehouse............................................TAmpa 2-2264 Trail Ridge -r!-ig ineiiL,S Ti^-vepaxu-uexio--TxDlla_nje_ Georgia Atlanta Pigments Department--Warehouse 1261 Spring Street, N. W. (3) Dyes and Chemicals Division-- District Office...................................... TRinity 5-5391 Elastomer Chemicals Department-- District Office.......................................TRinity 5-5391 739 West Peachtree Street (8) Grasselli Chemicals Department, Biological and Industrial Chemicals-- District Office...................................TRinity 6-1586 632 Hamilton Avenue, S. E. "Freon" Products Division-- Warehouse............................................ EMerson 5391 805 Peachtree Building (8) Photo Products Department-- District Office.......................................TRinity 5-2841 Florida Highland 225 Moore Street S. E. (2) Pigments Department--Branch Office. JAckson 5-4557 Pigments Department--Plant Jacksonville 1737 Ellsworth Industrial Drive, N. W. (18) Finishes Division-- Automotive Refinishing Materials-- Regional Office and Warehouse. SYcamore 4-9581 2256 Dennis Street (1) * Industrial Finishes--Regional Finishes Division-- Office..........................................................SYcamore4-9581 Automotive Refinishing Materials-- Service Warehouse..........................................ELgin3-7461 Trade Sales Finishes--Regional Office andWarehouse............................... SYcamore4-9581 Trade Sales Finishes--Warehouse. . . .ELgin 3-7461 Polychemicals Department--Branch 841 Miami Road, 1603 Prudential Bldg. (7) Office..............................................................SYcamore4-9581 Peters Cartridge Division Branch Office............................................................... FLanders9-4251243F0ilmWeDset pPaeratmchetrnete(SPtarcekeat,giNng. W. (9) Sales) -- Remington Arms Company, Inc.-- District Office...................................................TRinity2-5828 Branch Office................................................. FLanders9-4252 E. Union and Ionia Streets "Freon" Products Division-- Warehouse........................................................... ELgin3-572P1ost Office Box 487 Finishes Division-- Tucker Automotive Finishes--Plant Miami Automotive Refinishing Materials--Plant 2792 N.W. 24th Street _ "Freon" Products Division-- Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Warehouse.......................................... NEwton 5-2541 Tampa 304 South Franklin Street (2) Finishes Division, Trade Sales Finishes-- Warehouse............................................TAmpa 2-2414 Idaho Lewiston Pigments Department--Warehouse 144 ^Numbers in parentheses indicate postal zones. DUP210010775 OFFICES,- PLANTS AND WAREHOUSES Illinois Phone Illinois (continued) Phone Chicago Chicago (cont.) Petroleum Chemicals Division--Additives-- 7250 North Cicero Avenue, Lincolnwood (46) (cont.) Shipping Point Polychemicals Department--Branch Office Pigments Department--Warehouse Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 7 South Dearborn Street (3)* Dyes and Chemicals Division-- 4718-28 West Roosevelt Road District Office.................................................ANdover3-7000 "Freon" Products Division-- Elastomer Chemicals Department-- Warehouse......................................... ANdover 3-7000 District Office.................................................ANdover3-7000 Film Department (Packaging and East St. Louis "FIOrnefdofiuncse"t..rP.i.ar..ol..dS..u.a.c.l.et..ss..).D--...i.Dv..i.si.s.i.ot..rn.i.c.--.t..D.O...fi.fs.ic.t.re..i.c...t...A...N...d..o...v.AerN3d-o70v0e0r3-700P0eLtreoaleduCmomChpeomunicdasl--s DShivipispioinng--PToeintrtaethyl Peters Cartridge Division--Branch Office..................................................................... STate2-7781 Kankakee Remington Arms Company, Inc.-- Pigments Department--Warehouse Branch Office....................................................... STate2-7781 2100 Elston Avenue (14) Finishes Division-- Automotive Finishes--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse 2560 North Elston Avenue (47) Finishes Division, Automotive Refinishing Materials--Service Warehouse . .BRunswick 8-2050 Seneca Explosives Department--Plant Indiana East Chicago Grasselli Chemicals Department--Works 4251 South Crawford Avenue (32) Grasselli Chemicals Department, Bio "Freon" Products Division--Plant logical and Industrial Chemicals-- District Office................................................. CLiffside4-767P6eLtreoaleduCmomChpeomunicdasl--s DShivipispioinng--PToeintrtaethyl 4560 Touhy Avenue, Lincolnwood, (46) Edgebrook Station Photo Products Department-- District Office and Warehouse. . ORchard 5-5500 Fortville Grasselli Chemicals Department--Works 20 North Wacker Drive (6) Indianapolis Pigments Department (Room 1711) -- Branch Office................................................. ANdover3-700P0igments Department--Warehouse 8 SPoeSutratohlelesMuOimcfhfiCicgheae.n.m...A.ic.v.a.e..lsn...u.D.e..i.v.(.i3.s.).i.o..n..--.......................RAndolph6-863108F25inAiWsuShteoeessrmtviD1oc8teiivtvhWiesSiaoRtrnreee--hfeinotius(sh4e)in..g...M....a..t..e..r.i.a...ls...--. MElrose 8-5591 7250 North Cicero Avenue, Lincolnwood (46) Electrochemicals Department--District Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Explosives Department, Chemical and Explosives Sales Sections--Branch Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Trade Sales Finishes--Warehouse. . MElrose 8-5593 1001 E. New York Street "Freon" Products Division-- Warehouse.......................................... MElrose 7-1466 Iowa Fabrics Division--Branch Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Finishes Division-- Automotive Refinishing Materials-- Regional Office Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Industrial Finishes--Regional Office Chicago Calls: INdependence 3-7250 Clinton Film Department--Plant Davenport 3855 Rockingham Road (1) Finishes Division, Trade Sales Finishes --Warehouse..................DAvenport 2-2861 Others: ORchard 5-1010 Trade Sales Finishes--Regional Chicago Calls: INdependence 3-7250 Others: ORchard 5-1010 Des Moines 2--9th Street (4) "Freon" Products Division--Warehouse...........4-2124 ^Numbers in parentheses indicate postal zones. 145 DUP210010776 OFFICES, PLANTS AND WAREHOUSES j. Iowa (continued) Phone Ma inS Phone Fori Madison Bangor f Post Office Box 319 !; Finishes Division-- ij Automotive Finishes--Plant 93 Central Street (4) Finishes Division, Trade Sales Finishes-- Warehouse............................................BAngor 2-0554 ij Automotive Refinishing Materials--Plant Portland jj ]j Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse 255 Forest Avenue (3) Finishes Division, Trade Sales Finishes-- Warehouse......................................... . .SPruce 3-2151 I i Kansas Tecumseh Film Department--Plant Maryland Baltimore Pigments Department--Plant and Warehouse Wichita 2041 North Mosley Avenue (4)* Electrochemicals Department Barada & Page, Inc.---Sales Agents. AMhurst 7-6293 Kentucky Louisville 321 Fallsway (2) Electrochemicals Department--District Office..........................................................PLaza 2-2862 400 East Twenty-ninth Street (18) Finishes Division-- Automotive Refinishing Mate rials--Service Warehouse..............BElmont 5-0278 Trade Sales Finishes--Warehouse......... TUxedo 9-6053 Elastomer Chemicals Department--Plant "Freon" Products Division--Plant Massachusetts Pigments Department--Warehouse Boston 3927 Park Drive--Shively (16) Finishes Division, Trade Sales Finishes--Warehouse.......................EMerson 8-1659 Wurfland 35 Cambridge Parkway (42) Fabrics Division--Branch Office . . . UNiversity 4-1442 Finishes Division-- Automotive Refinishing Mate rials--Regional Office............................ UNiversity4-1442 Grasselli Chemicals Department--Works Industrial Finishes--Regional Office.........................................................UNiversity4-1442 Trade Sales Finishes--Regional i Louisiana iI Baton Rouge Office.........................................................UNiversity4-1442 37 Cambridge Parkway (42) 1021 W. McKinley Street Electrochemicals Department Barada & Page, Inc.--Sales Agents. Dickens 2-4794 Finishes Division, Automotive Refinishing Materials--Service Warehouse................................................... UNiversity4-9510 Lake Charles Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point New Orleans Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Pigments Department--Warehouse MapLe and Leake Avenues (18) Electrochemicals Department Barada & Page, Inc.--Sales Agents......................................... UNiversity 1-8191 140 Federal Street (10) Elastomer Chemicals Department-- District Office.................................................HAncock6-1711 Electrochemicals Department-- District Office.................................................HAncock6-1711 Explosives Department, Chemical Sales Section--Branch Office...............HAncock 6 1711 Film Department (Packaging Sales) -- District Office.................................................HAncock6-1711 Grasselli Chemicals Department, Industried Chemicals--District Office... .HAncock 6-1711 Photo Products Department-- District Office.................................................HAncock6-1711 Polychemicals Department--Branch Office................................................................HAncock6-1711 4401 Euphrosine Street (25) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse..........................AUdubon 6658 Trade Sales Finishes--Warehouse. . .AUdubon 6658 665 Boylston Street (16) Peters Cartridge Division-- Branch Office..................................... Commonwealth6-0856 Remington Arms Company, Inc.-- Branch Office........................... Commonwealth 6-0856f 1400 S. Peters Street "Freon" Products Division-- 359 Washington Street (Malden 48) Pigments Department-- DUP210010777 OFFICES, PLANTS AND WAREHOUSES Massachusetts (continued) Everett 59 Waters Avenue (49)* Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse Michigan (continued) Flint Hamilton Avenue and St. John Street (2) Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant "7" Specialties Sales--Plant Phone Leominster Polychemicals Department--Plastic Products Division--Plant Malden Pigments Department- -Warehouse Montague Elastomer Chemicals Department--Plant Saginaw 2506 Weiss Road Finishes Division, Trade Sales Finishes--Warehouse.................... . PLeasant 3-0162 Springfield 233 Page Street (4) Finishes Division, Trade Sales Finishes--Warehouse...................... REpublic 2-6216 Wyandotte Electrochemicals Department--Plant Michigan Detroit Pigments Department--Warehouse Minnesota Duluth 742 East Superior Street, Hartley Bldg. (2) Explosives Department, Explosives Sales Section--Branch Office..................RAndolph 4-8593 5-238 General Motors Building (2) Fabrics Division--Branch Office..........TRinity 5-1990 Minneapolis Finishes Division-- Petroleum Chemicals Division--Tetraethyl Automotive Finishes--Auto Manu Lead Compounds--Shipping Point facturers' Sales Office and Color Advisory Service..........................................TRinity5-199P0igments Department--Warehouse TraOdfeficSea..l.e..s...F..i.n..i.s..h..e..s..--....R...e..g..i.o..n..a..l......................TRinity5-199104F01iniSsoheusthD4itvhisSiotnre,eAt u(4to) motive Refin 19930 Conner Avenue (34) Finishes Division-- ishing Materials--Service Warehouse...........................................FEderal 2-0558 AuStoemrviocteivWe aRreefhinoiusshein..g....M...a...t.e..r.i.a...l.s..--..................FOrest6-8801001F1inPisohertslaDndiviAsivoenn,uTe,raSdoeuSthale(4s) Trade Sales Finishes--Warehouse.... FOrest 6-8800 Finishes--Warehouse..........................FEderal 9-4675 13000 West Seven Mile Road (35) 1207 Foshay Tower (2) Elastomer Chemicals Department-- Grasselli Chemicals Department, Bio District Office............................................. UNiversity4-1963 logical and Industrial Chemicals-- Electrochemicals Department-- District Office...................................... FEderal 5-4181 District Office............................................. UNiversity4-1966314 Plymouth Building (3) Grasselli Chemicals Department, Industrial Chemicals--District Peters Cartridge Division--Branch Office......................................................FEderal 3-5800 Office............................................................ UNiversity4-1963 Remington Arms Company, Inc.-- Pigments Department--Branch Branch Office........................................FEderal 3-5800 Office............................................................ UNiversity4-1963 Polychemicals Department--Branch Office............................................................ UNiversity4-19623313 Wycliff Street St. Paul 1530 East Hancock Street "Freon" Products Division-- "Freon" Products Division-- Warehouse........................................... Midway 6-4869 Warehouse.........................................................TEmple1-2260 Ecorse Grasselli Chemicals Department- -Works Mississippi Jackson Pigments Department--Warehouse *Numbers in parentheses indicate postal zones. 147 DUP210010778 OFFICES, PLANTS AND WAREHOUSES MlSSOOr! Car) Junction Explosives Department--Plant Phone Joplin 402 Main Street, First National Building Explosives Department, Explosives a--x:--__t >-------- v. n/r a .-tv.;- a cnsn Montana Billings Petroleum Chemicals Division--Additives-- Shipping Point Cut Bank Petroleum_Chemicals Division--Tetraethyl Lead uompounds--Shipping Point Phone Kansas City Petroleum Chemicals Division--Tetraethyl Lead Compounds and Additives-- Shipping Point Pigments Department--Warehouse Guinotte and Michigan Avenues (20) * Electrochemicals Department Barada & Page, Inc.--Sales Agents . .Victor 2-6240 1004 Baltimore Avenue (5) Film Department (Packaging Sales) District Office......................................... GRand 1-6629 6001 Manchester Trafficway (41) Finishes Division-- Automotive Refinishing Materials-- Regional Office................................... EMerson 3-1390 Industrial Finishes--Regional Office................................................ EMerson 3-1390 Trade Sales Finishes--Regional Office................................................ EMerson 3-1390 6015 Manchester Trafficway (41) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse......................... EMerson3-1390 Trade Sales Finishes--Warehouse. .EMerson 3-1390 228 W. 4th Street _ "Freon" Products Division--Warehouse. .Victor 0225 New Jersey Carneys Point Elastomer Chemicals Department--Plant "Freon" Products Division--Plant Petroleum Chemicals Division--Tetraethyl Lead Compounds and Additives-- Plant and Shipping Point Deepwater Dyes and Chemicals Division--Plant Gibbstown Explosives Department--Plant Linden Grasselli Chemicals Department--Works (Grasselli) Newark 256 Vanderpool Street Pigments Department--Plant and Warehouse St. Louis Finishes Division-- Parlin Pigments Department--Warehouse Automotive Finishes--Plant 2300 Hampton Avenue (10) Fabrics Division--Branch Office.......... Mission 7-0800 Finishes Division-- Automotive Refinishing Materials-- Automotive Refinishing Materials--Plant Industrial Finishes--Plant "7" Specialties Sales--Plant Photo Products Department--Plant Service Warehouse.................................................... Mission7-0800 Trade Sales Finishes--Warehouse . . Mission 7-0800 Paterson 112 West Ferry Street 5th Avenue and East 27th Street "Freon" Products Division-- "Freon" Products Division-- Warehouse........................................................GArfield1-2200 Warehouse......................................... LAmbert 5-1887 1810 Arcade Building (1) Peters Cartridge Division--Branch Penns Grove Office...................................................................... MAin1-8622 Remington Arms Company, Inc.-- Explosives Department--Plant Branch Office........................................................MAin1-8622 818 Olive Street (1) Perth Amboy PoOlyfcfhiceem...i.c..a..l.s...D...e..p..a...r.t.m....e..n..t..--...B...r.a..n...c..h..................CEntral1-853E2lectrochemicals Department--Plant 10 South Brentwood Boulevard, Clayton (5) Grasselli Chemicals Department, Indus trial Chemicals--District Office.. .Volunteer 1-3155 Pompton Lakes Explosives Department--Plant 148 *Numbers in parentheses indicate postal zones. DUP210010779 OFFICES, PLANTS AND WAREHOUSES New jersey (continued) Phone Springfield 15 Stern Avenue Finishes Division-- Automotive Refinishing Materials-- Service Warehouse.......................... DRexel 6-5151 Trade Sales Finishes--Warehouse. . . DRexel 6-6070 1750 North Olden Avenue (8)* Elastomer Chemicals DepartmentDistrict Office...................................... EXport 3-7141 New York Albany 116 Railroad Avenue (5) Finishes Division, Trade Sales Finishes-- Warehouse........................................... ALbany 2-5711 Buffalo Film Department--Plant 1696 Walden Avenue (25) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse.........................KEystone 7979 Trade Sales Finishes--Warehouse.. .KEystone 8242 595-601 Ohio Street (4) "Freon" Products Division-- Warehouse...........................................MAdison 8860 New York (continued) phone New York (coni.) 350 Fifth Avenue, Empire State Bldg. (1) (cont.) Grasselli Chemicals Department, In dustrial Chemicals--District Office....................................................................LOngacre 3-6456 Peters Cartridge Division (Room 1009) -- Branch Office.................................... LOngacre 3-6431 Pigments Department 'Hoorn 1027''_ Branch Office.....................................LOngacre 3-6400 PoLychemicals Department--Branch Office...................................................LOngacre 3-6400 Polychemicals Department--Plastic Products Division--General Office LOngacre 3-6400 Remington Arms Company, Inc. (Room 1009)--Branch Office................................... LOngacre3-6431 Textile Fibers Department (Acetate, "Dacron," Nylon, "Orion," Rayon) -- Regional Office.............................................................. LOngacre3-6400 40 Worth Street (13) Dyes and Chemicals Division-- District Office............................................... COxtlandt7-3966 "Freon" Products Division-- District Office...............................................COrtlandt7-3965 45 Rockefeller Plaza (20) Petroleum Chemicals Division-- Sales Office................................................... COlumbus5-2342 248 West 18th Street (11) Photo Products Department-- District Office and Warehouse....... WAtkins 4-3100 Dresden Electrochemicals Department--Plant Niagara Falls Electrochemicals Department--Plant **lon Remington Arms Company, Inc.-Plant _ Long Island City 48-05 Van Dam Street (1) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse........................STillwell 6-0200 Trade Sales Finishes--Warehouse. STillwell 6-0200 Newburgh Fabrics Division--Branch Office and Plant..............3700 New York 35E0 leFciftrthocAhevemniucael,sEDmeppiarertmSteantet--Bldg. (1) District Office...................................LOngacre 3-6440 Explosives Department, Chemical and Explosives Sales Sections--Branch Office................................................. LOngacre 3-6400 Fabrics Division Branch Office....... LOngacre 3-6400 Film Department (Packaging and Industrial Sales)--District Office. .LOngacre 3-6400 Rochester photo products Department_Plant 95 La Grange Avenue (13) Finishes Division-- Trade Sales Finishes--Warehouse. GLenwood 3-7500 Syracuse Bridge Street, East Syracuse Finishes Division, Trade Sales Finishes-- Warehouse..........................................GRanite 2-0451 Norfh Carolina Brevard Pigments Department Plant, CharloSSe 2500 South Boulevard (3) Automotive Refinishing Materials-- Service Warehouse.......................FRanklin 6-6477 Trade Sales Finishes--Warehouse. . .EDison 2-3177 ^Numbers in parentheses indicate postal zones. 149 DUP210010780 OFFICES, PLANTS AND WAREHOUSES North Carolina (continued) Phone Ohio (confirmed) phone Charlotte (cont.) Circleville 427 West Fourth Street (1)* Film Department--Plant Dyes and Chemicals Division-- District Office................................................ FRanklin5-5561 Elastomer Chemicals Department-- Cleveland District Office................................................ FRanklin5-556G1 rasselli Chemicals Department--Works Electroehemicals Department-- Pigments Department--Warehouse i District Office................................................ FRanklin5-5565109-50 ]E?.02.cl (10) Explosives Department, Chemical Sales Section--Branch Office.......... FRanklin 5-5561 Photo Products Department-- District Office................................ EDison 1-0375 Textile Fibers Department (Acetate, "Dacron", Nylon, "Orion", Rayon) --Regional Office.......................................... 3133 Chester Avenue (14) FRanklin5-5561 Fabrics Division--Branch Office...........................MAin1-8516 Finishes Division-- Steel Creek Road Automotive Refinishing Materials-- "Freon" Products Division-- Regional Office.................................................MAin1-8516 j Warehouse..................................................... FRanklin5-5561 Industrial Finishes--Regional Office.. . MAin 1-8516 Greensboro 111 Jefferson Building Peters Cartridge Division-- Branch Office.................................BRoadway 2-6879 Remington Arms Company, Inc.-- Branch Office.................................BRoadway 2-6879 Kinston Textile Fibers Department ("Dacron") --Plant Trade Sales Finishes--Regional Office.MAin 1-8516 3137 Chester Avenue (14) Finishes Division, Automotive Refmishing Materials--Service Warehouse............. MAin 1-8516 Trade Sales Finishes--Warehouse........MAin 1-8516 Union Commerce Building (14) Peters Cartridge Division (Room 1413)--Branch Office..........PRospect 1-7804 Remington Arms Company, Inc. (Room 1413)--Branch Office..........PRospect 1-7804 Ohio Akron 40 East Buchtel Avenue at High Street (8) Elastomer Chemicals Department-- District Office..................................... POrtage 2-8461 191 South Main Street (8) Textile Fibers Department ("Dacron", Nylon, Rayon) -- Regional Office.............................HEmlock 4-6651 National City Bank Building (14) Grasselli Chemicals Department, Biological and Industrial Chemicals (Room 1321)--District Office........... MAin 1-G460 11900 Shaker Blvd. (20) Electrochemicals Department-- District Office................................................LOngacre1-1580 Explosives Department, Chemical Sales Section--Branch Office..........LOngacre 1-5070 Pigments Department-- Branch Office.................................................LOngacre1-1060 Bellevue Petroleum Chemicals Division-- Tetraethyl Lead Compounds-- Shipping Point Canton 2981 Independence Road "Freon" Products Division-- Warehouse............................................VUlcan 3-3815 25 Prospect Avenue, Suite 305 Republic Building (15) Petroleum Chemicals Division-- Sales Offices....................................... SUperior 1-1363 205 Reynolds Place, S.W. (2) Finishes Division-- Columbus Trade Sales Finishes--Warehouse. GLendale 2-9830 1450 Dublin Road (12) Finishes Division-- Cincinnati I 2412 Carew Tower (2) Electrochemicals Department-- Automotive Refinishing Materials-- Service Warehouse..........................CApitol 1-6724 Trade Sales Finishes--Warehouse .. HUdson 6-7191 District Office................................................ PArkway1-5253 603 Terrace Hilton Building (2) Grasselli Chemicals Department, Industrial Chemicals--District Office.................................................. CHerry 1-4570 Dayton 336 Leo Street (4) Finishes Division, Automotive Refinishing Materials-- Service Warehouse.......................... Michigan 5623 3001-17 Vine Street (19) Finishes Division, Trade Sales Findlay Finishes --Warehouse.................................UNiversity1-341R4emington Arms Company, Inc.--Plant 150 ^Numbers in parenth indicate postal zones. ! DUP210010781 OFFICES, PLANTS AND WAREHOUSES Ohio (continued) Lockland Pigments Department--Warehouse North Bend Grasselli Chemicals Department-- Works (Fort Hill) Phons Oregon (continued) Phone Portland (cont.) 1238 N.W. Glisan Street (9) Pigments Department--Branch Office. CApitol 2-6012 535 S.E. Water Avenue (14) "Freon" Products Division-- Warehouse............................................CApitol 7-0561 Toledo Electrochemicals Department-Plant Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point 1930 Tremainsville Road, Post Office Box 953 (1)* Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes-Plant 330 West Central Avenue (10) Finishes Division, Trade Sales Finishes--Warehouse......................... CHerry 1-2197 Youngstown ,, ,, _ , , 3203 Southern Boulevard (3) Toshes Division, Trade Salc3 Finishes Warehouse........................STerling 8-9688 Ovnlfmlnihiuormnun Oklahoma City i vnn * r-, , , WOO West Grand Avenue (1) Electrochemicals Department Barada & Page, Inc.-Sales Agents. CEntral 2-1351 oni v x j .-u a* i /o, Hill Street (2) Fimshes Division, Automotive R"en^m"e._.................... JAckson 5-2194 Trade Sales Finishes--Warehouse.. .JAckson 5-2194 25 E. Reno Avenue (2) _ . Freon ' Products Division-- Warehouse...........................................CEntral 2-3176 ^U^Sa 26 North Guthrie Street (3) Electrochemicals Department Barada & Page, Inc.--Sales Agents. .LUther 5-1251 1811 South Baltimore Avenue (19) Petroleum Chemicals Division-- Sales Office............................................LUther 5-5578 Oregon Portland. Pigments Department--Warehouse 55 Southeast McLoughlin Blvd. (2) Finishes Division Automotive Kefmishmg MaterialsService Warehouse.......................BElmont 2-6177 Trade Sales Finishes--Warehouse. .BElmont 2-6177 Pennsylvania Moosic Explosives Department-Plant Philadelphia Grasselli Chemicals Department--Works Pigments Department--Warehouse 1616 Walnut Street (3) Dyes and Chemicals DivisionDistrict Office....................................Kingsley 5-1950 Polychemicals DepartmentBranch Office.....................................Kingsley 6-4600 308 ,,Eas,t TLancas,ter A, venue, Wynnewood (3) Electrochemicals Department-- District Office........................................TRinlty 8-2700 Fabrics Division--Branch Office........ Midway 9-1420 Film Department (Packaging Saies) -- District Office......................................Kingsley 5-4050 Finishes Division, Automotive Refinishing Materials-- Regional Office................................TRinity 8-2700 TInradduestgraialelsFFinililsishheess--_RReeggioionnaal ]Office.TRinity 8-2700 Office................................................. TRinity 8-2700 Grasselli Chemicals Department, Biological and Industrial Chemicals -District Office.............................. TRinity 8-2700 Photo Products Department- District Office.......................................Midway 9-1420 Textile Fibers Department (Acetate, "Dacron", Nylon, "Orion", Rayon, "Teflon")-Regional Office............... TRinity 8-2700 3500 Grays Ferry Avenue (46) Finishes Division-- Automotive Finishes--Plant Automotive Refinishing Materials--Plant Industrial Finishes--Plant Trade Sales Finishes--Plant and Warehouse 4242 Whitaker Avenue (24) Finishes Division-- Automotive Refinishing Materials --Service Warehouse.....................GArfield 6-3701 ,, n ,, , _. /0n 2 Center Plaza (2) Petroleum Chemicals DivisionSales Office............................................ LOcust 8-3531 117 South Seventeenth Street, Architects Building (3) Pigments Department (Room 910) --Branch Office.............................Rlttenhouse 6-2080 Pittsburgh Qne Gateway Center (19) Explosives Department, Explosives Sales Section-Branch Office............ATlantic 1-7777 Petroleum Chemicals DivisionSales Office--(Room 751)................. ATlantic 1-2933 *Numbers in parentheses indicate postal zones. 151 DUP210010782 OFFICES, PLANTS AND WAREHOUSES Pennsylvania (continued) phone Tennessee (confinued) Phone Pittsburgh (cont.) Memphis 2222 Noblestown Road (5)* Finishes Division-- Automotive Rcfinishing Materials-- Service Warehouse......................... WAlnut 1-9190 Trade Sales Finishes--Warehouse. . .WAlnut 1-7000 Electrochemicals Department--Plant 1573 Union Avenue (3) Finishes Division-- Automotive Refinishing Materials --Service Warehouse............................. BRoadway6-4746 Trade Sales Finishes-- Grasselli Chemicals Department, Industrial Chemicals--District Office.GRant 1-5427 Warehouse............................................... BRoadway6-2745 i 1701 Sterick Building 2001 First National Bank Building (22) Peters Cartridge Division-- Peters Cartridge Division-- Branch Office...................................................JAckson6-5326 Branch Office........................................ GRant 1-3076 Remington Arms Company, Inc. -- Remington Arms Company, Inc.-- Branch Office........................................ GRant 1-3076 Branch Office...................................................JAckson6-5326 3433 Smallman Street "Freon" Products Division-- Warehouse......................................... MUseum 1-3442 61 W. Georgia Avenue "Freon" Products Division-- Warehouse.......................................... JAckson 7-5641 Towonda Photo Products Department--Plant Nashville 1406 Broad Street (3) Finishes Division-- Trade Sales Finishes--Warehouse. . . ALpine 5-8486 f i Rhode Island Old Hickory ii li-l! Rumford 50 North Broadway (16) Film Department--Plant Textile Fibers Department (Rayon)--Plant Dyes and Chemicals Division-- District Office...................... EAst Providence 1-6522 "Freon" Products Division-- Warehouse........................................... GEneva 4-6500 Textile Fibers Department (Acetate, Texas "Dacron", Nylon, "Orion", Rayon) -- Amarillo Regional Office--Providence Region.............................................. GEneva 4-6500 Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Providence 217 Broad Street (3) Finishes Division-- Beaumont Automotive Refinishing Materials-- Elastomer Chemicals Department--Plant [i Service Warehouse..........................GAspee 1-2709 Trade Sales Finishes--Warehouse. . . GAspee 1-2709 Petroleum Chemicals Division--Plant-- Tetraethyl Lead Compounds--Shipping Point South Carolina Camden Textile Fibers Department ("Orion")--Plant ; :. i :: Tennessee Chattanooga Textile Fibers Department (Nylon)--Plant Columbia Film Department--Plant Johnsonville Pigments Department--Plant Corpus Chrisfi Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point 1509 North Tancahua Street Electrochemicals Department Barada & Page, Inc.--Sales Agents. . .TUlip 3-8464 Dallas Pigments Department--Warehouse Third and Borich Streets (10) Electrochemicals Department Barada & Page, Inc.--Sales Agents...........................................HAmilton 1-7668 2607 Live Oak Street (21) Fabrics Division--Branch Office...........TAylor 4-2517 DUP210010783 OFFICES, PLANTS AND WAREHOUSES Texas (continued) Phone Dallas (cont.) 8510 Ambassador Row (21)* Finishes Division-- Automotive Refinishing Materials --Regional Office........................FLeetwood 7-3870 Automotive Refinishing Materials --Service Warehouse................. FLeetwood 7-4611 Industrial Finishes--Regional OfRcC pTigg+w/jA/l 7_Sfi7fl Trade Sales Finishes-- Regional Office............................FLeetwood 7-4611 Trade Sales Finishes--Warehouse FLeetwood 1-4232 1241 National City Building (1) Peters Cartridge Division-- /Riverside 2-6908 Branch Office....................................(Riverside 2-6787 Remington Arms Company, Inc.-- /Riverside 2-6908 Branch Office....................................(Riverside 2-6787 1628 Oak Lawn Avenue (7) Photo Products Department-- District Office and Warehouse..........Riverside 1404 Santa Fe Building (2) "Freon" Products Division-- Warehouse..........................................Riverside 2-7111 Texas (continued) Phone La Porte Grasselli Chemicals Department--Works (Houston) "Freon" Products Division--Warehouse GRand 9-2801 Ext. 360 Odessa 125 South Grandview Avenue Electroehemicals Department--- Barada & Page, Inc.--Sales Agents. FEderal 7-7323 Orange Polychemicals Department--Plant Texas City Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Victoria Polychemicals Department--Plant Utah Salt Lake City Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Fort Worth 2800 South Main Street (1) Electroehemicals Department Barada & Page, Inc.--Sales Agents. WAlnut 7-8472 990 So. Sixth Street, West (4) Finishes Division-- Automotive Refinishing Materials-- Service Warehouse........................... EMpire 4-3582 Trade Sales Finishes--Warehouse. . .EMpire 4-3582 Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Houston Petroleum Chemicals Division--Tetraethyl Lead Compounds and Additives--Shipping Point Pigments Department--Warehouse Murphy and Kirbyville Streets (21) Electroehemicals Department Barada & Page, Inc.--Sales Agents. Mission 4-5461 909 Walker Bank Building (11) Peters Cartridge Division--Branch Office......................................................... ELgin 5-8686 Remington Arms Company, Inc.-- Branch Office........................................... ELgin 5-8686 520 W. 2nd South Street "Freon" Products Division-- Warehouse............................................. EMpire 4-1921 Virginia 3202 Weslayan Street (27) Explosives Department, Chemical Martinsville Textile Fibers Department (Nylon)--Plant Sales Section--Branch Office.........MOhawk 7-9197 Richmond 332 South Wayside Drive (11) Film Department--Plant Finishes Division-- Automotive Refinishing Materials-- Grasselli Chemicals Department--Works Service Warehouse.......................................WAlnut3-2546 (James River) Trade Sales Finishes--Warehouse.. .WAlnut 3-2521 Textile Fibers Department (Rayon, Nylon 1100 East Holcombe Boulevard (25) and "Teflon")--Plant Grasselli Chemicals Department, Bio logical and Industrial Chemicals-- 12th and uinwiddie Avenue (13) District Office.................................................. JAckson9-4227 "Freon" Products Division-- Warehouse............................. . BElmont 3-5401 Pigments Department (1105 Prudential Building) --Branch Office...................................JAckson3-5533 Roanoke 2601 A West Grove Lane (6) Elastomer Chemicals Department-- District Office.................................... MOhawk 7-7429 2710 Franklin Road, S.W. (5) Finishes Division, Trades Sales Finishes--Warehouse..................... Diamond 2-3176 705 Bank of Commerce Building (2) Waynesboro Petroleum Chemicals Division--Sales Textile Fibers Department (Acetate and Office.................................................................. CApitol5-1151 "Orion") --Plant *Numbers in parentheses indicate postal zones. 153 DUP210010784 OFFICES, PLAMTS AMD WAREHOUSES Washingfo H Du Pont Explosives Department--Plant Phone Ferndale Petroleum Chemicals Division--Tetraethyl Lead Compounds--Shipping Point Mt. Vernon Petroleum Chemicals Division--Additives-- Shipping Point West Virg InlcS Belle (Charleston) Polychemicals Department--Plant Phone Huntington Fourth Avenue and Ninth Street, West Virginia Building (1) Explosives Department, Explosives Sales Section--Branch Office..................... elAchson 5-5124 114 West 8th Avenue (1) Finishes Division, Trade Sales Fin ishes--Warehouse..............................JAckson 2-8233 Seattle Mariinsburg Film Department--Warehouse Explosives Department--Plant Pigments Department--Warehouse 701-705 Second Avenue, Hoge Building (4)* Explosives Department, Explosives Sales Parkersburg Polyehemicals Department--Plant Section--Branch Office....................................... MAin3-8830 525 Boren Avenue, North (9) Finishes Division, Trade Sales Finishes-- Wisconsin Barksdale Warehouse.............................................................MAin2-416E5xplosives Department--Plant 4003 Aurora Avenue (3), Room 215 Petroleum Chemicals Division-- Milwaukee Sales Office....................................................... MElrose2-69727601 North Third Street (21) First Avenue, South and Walker Streets (4) "Freon" Products Division--Warehouse. MAin 3-0350 Finishes Division, Automotive Refin ishing Materials--Service Warehouse............................................COncord 4-6872 Spokane 6500 West State Street (13) Grasselli Chemicals Department, Indus West 1017 Railroad Avenue (7) Finishes Division, Trade Sales Fin trial Chemicals--District Office........... SPring 4-4850 "Freon" Products Division-- ishes--Warehouse......................................... Riverside7-5898 Warehouse............................................... SPring4-0200 DUP210010785 FOREIGN OFFICES, REPRESENTATIVES AND AFFILIATED COMPANIES Argentina Buenos Aires Casilla de Correo 44 E. P. Galpin............................ Technical Representative Tacuari 237 Ducilo S.A.I.C. Australia Sydney 85 Clarence Street A. S. Harrison & Co. Pty., Ltd. P. H. Ehrlich.................... Technical Representative Belgium Brussels 85, rue de la Democratic C. L. W. Stein...................... Technical Representative Fabrics & Finishes Department T. J. Noone........................... Technical Representative Fabrics & Finishes Department 4, rue de Homes J. C. Salmon...................... Technical Representative-- Textile Fibers Department H. S. Jones, Jr....................Technical Representative-- Textile Fibers Department A. D. R. Schoenfeld.......... Technical Representative-- Textile Fibers Department Brazil 1 Rio de Janeiro Av. Graca Aranha 333, Caixa Postal 710 Du Pont do Brasil, S. A........................... Branch Office Sao Paulo Rua da Consolasao, 57, Caixa Postal 8112 Du Pont do Brasil, S. A.......................... General Office Chile Santiago Calle Agustinas 1350, Piso 3 Compafiia Sud-America de Explosives.. General Office Colombia Medellin c/o Jose Arango V., Apartado Aereo 2063 M. R. Webb.......................... Technical Representative Cuba Havana Ediflcio Ambar Motors, Calle 23 #55 Du Pont Inter-America Chemical Co., Inc. ............................................................... General Office M. E. Noriega............. Technical Sales Representative Santiago da Cuba Estrada Palma 404 Du Pont Inter-America Chemical Co., Inc. ...............................................................Branch Office England London Bush House, Aldwych, W. C. 2 E. I. du Pont de Nemours & Co. (Inc.). .General Office 6 Charles II Street, S. W. 1 Du Pont Company (United Kingdom) Ltd. .............................................................. General Office S. W. McCune, III........ General Sales Manager-- Elastomer Chemicals Department, Textile Fibers Department and Grasselli Chemicals Department France Paris 11, Avenue Kleber E. S. Voutetakis............... Technical Representative-- Elastomer Chemicals Department Canada Montreal, Quebec Du Pont Building, 1135 Beaver Hall Hill, Box 660 Du Pont o Canada Limited..................General Office Toronto, Ontario 85 Eglinton Avenue, East Du Pont of Canada Limited................. Branch Office Germany Frankfurt Eschenheimer Anlage 30 Dr. R. A. Osten....................Technical Representative, European Area Hamburg Deichstrasse 49 T. Gabris........................... Technical Representative-- Elastomer Chemicals Department 155 DUP210010786 FOREIGN OFFICES, REPRESENTATIVES AND AFFILIATED COMPANIES Hong Kong and Japan Hong Kong 8 CloveUy Path, May Road K. Wenzel..............................Technical Representative Osaka (Japan) No. 47, 2-Chome, Andojibashi-Dori, Minami-Ku American Trading Co. (Japan) Ltd. R. J. Dunne...................... Technical Representative Organic Chemicals Department Mexico Guadalajara, Jal. Av. Juan Manuel 1186, Apartado 301 Du Pont, S. A. de C. V.............................Branch Office Mexico, D. F. Av, Judrez 117, Apartado 1799 Du Pont, S. A. de C. V............................General Office Av. Juarez 117, Apartado Postal 43 Bis. Compania Mexicana de Explosivos S. A.. General Office Monterrey, N. L. Av. America Sur 610, Apartado Postal 608 Du Pont. S. A. de C. V............................ Branch Office Panama Panama City Apartado 4672, Estafeta Justo Arosemena A. Benjamin.......................... Technical Representative Fabrics & Finishes Department Peru Lima Avenida Tacna 592, Apartado 2787 Du Pont (Peru) S. A................................ General Office J. R. Ozier..........................Technical Representative-- Fabrics & Finishes Department Puerto Rico (continued) San Juan Avenida Ponce de LetSn #406 (Stop E. I. du Pont de Nemours & Co. (Inc.) Fabrics & Finishes Department F. D. Chapman..............................................Manager Sweden Goteborg O. Hamngatan 19B Dr. H. Horn......................Technical Representative-- Grasselli Chemicals Department and Elastomer Chemicals Department Switzerland Basel St. Johannsvorstadt 80, Postfach 43 , O. M. Lea.......................... Technical Representative-- Organic Chemicals Department Dr. L. E. Cowart. . Technical Service Representative-- Grasselli Chemicals Department R. E. Hyle...............................Advertising Department 6, route de Moyrin K. R. Miller___ 'JSiiiSVw .... Technical Representative-- Fabrics & Finishes Department Union of South Africa Johannesburg Hotel Carlton E. W, Zomosa....................Technical Representative-- Grasselli Chemicals Department 123 Pritchard Street, P. O. Box 8039 Marshall Hinds (Pty.) Ltd. W. M. Ryan.......................... Technical Representative Philippine Republic Manila 225 Myers Building, Thirteenth Street, Port Area R. B. Acton........................... Technical Representative Puerto Rico Rio Piedras Box 100, R. F. D. 1 W. R. Irey......................... Technical Representative-- Grasselli Chemicals Department Uruguay Montevideo Andrea Puyol 1633 V. F. Bliss.......................... Technical Representative-- Grasselli Chemicals Department Venezuela Caracas Apartado del Este 5582 Du Pont de Venezuela C. A.................... General Office 156 DUP210010787 DUP210010788