Document aBKeqmwVJ2QG2dGG8ZErz51jY

i4>CX Page 1 of 3 Revised 8/1/86 MATERIAL SAFETY DATA SHEET May be used to comply with OSHA's Hazard Communication Standard 29 CFR 1910,1200. Standard must be consulted for specific requirements. The product identity on this page meets the OSHA definition of an article and is exempt from the Hazard Communication Standard as to all normally careful uses. Some potential may exist for exposure to dust. The ingredients in these products are resin-bonded and hazards normally associated with contact to pure dusts of the listed ingredients should not be significant. Abex has listed all of the essential ingredients present in a series of products of this general description. All products identified on this MSDS contain asbestos but will not contain all of the other materials shown. The recommended exposure limits are those for the most hazardous substance in a class of substances. Exact formulation is considered proprietary and confidential. Precise product information will not be disclosed, other than to a health professional in accordance with the regulations, without an approved Secrecy Agreement. The information herein is believed to be accurate, however, Abex makes no representation or warranty as to its accuracy. This data is furnished gratuitously and independently of any sale of the product, and only for customer investigation and independent verification. Abex shall in no event be responsible for any damages of whatever nature directly or indirectly resulting from the publication or use of or reliance upon data contained nerein. No express or implied warranty of any kind, including warranties of merchantability or fitness for use, with respect to the product or to the data herein is made hereunder. IDENTITY (As Used on Label and List) 40 sefea, 4t-ie, s safes. 48-2,74-12.7413s, ao, site. 129-10,150-102, 2twa, 303-11,343W, 438, 552-53* 610-1243192, 68349,693499 Safes 693(512.531, 539,3551 Safes), 734161,822446,652-1053108,891-1,965(48,63371), 1000-12,1202-8,30237,3025-933273,3002-7, ABEX (610GG, 611GG, 607FE, 620FD, 63200.631SE. 604FF, 693EF, 630FF. 62SFE, 605GH, 614EF, 633EE, 613QQ, 674GO. 680GO, 679GQ. 616FF, 644FE, 688FF, 689FF, 6040FF, 688FF, 692FF, 684FF), ABB (22000,22200,203FE, 204FO, 21600,229GE, 206FF. 256EF, 234FF, 221FE, 209GH, 207EF, 223EE, 20BG6,24000,241GG, 290FF, 217FF, 245FE, 266FF, 297FF, 2BSFF, 289FF, 297FF), COM (318GG, 320GG, 301FE, 302FD, 31400,327QE. 304FF.358EF,332FF,318FE,307GH,305EF,321EE,306GO,355GG,340GG,315FF,368FE,352FE,353FF,376FF,386FF,373FF,378FF,365FF),ST.204FO,ST.279FE,ES83BFE,ST260FF,ES639FF,ST244F ' 7064, ABK-510B, 257,258, COM375EE, 511 SECTION I Manufacturer's Name: ABEX CORPORATION Friction Products Division Address: (Number, Street, City, State, Zip Code) 2410 Papermill Road, P.O. Box 3250 Winchester, VA. 22601 - Emergency Telephone Number (703) 662-3842 Telephone Number for Information (703) 662-3871 Date Prepared . November 12,1985 PreParer M.K. Leung - SECTION 11 - Hazardous Ingredients/Identity Information Hazardous Components (Specific Chemical Identity: Common Name(s) OSHA PEL Asbestos (Crysotile), Talc Silica, Silicate, Tripoli Carbon Black, Graphite, Coal, Coke Phenolic, Cashew and Elastomer Compounds Wood Flour and Other Fillers Iron, Zinc, Aluminum, Brass and their Oxides Copper Oxide 0.2 flbers/c.c. 0.1 mg/M3 2.0 mg/M3 19.0 mg/M3 1.0 mg/M3 10.0 mg/M3 1.0 mg/M3 ACGIH TLV 2 flbers/c.c. 0.1 mg/M3 2.0 mg/M3 19.0 mg/M3 1.0 mg/M3 10.0 mg/M3 1.0 mg/M? SECTION III - Physical / Chemical Characteristics Bolling Point Vapor Pressure (mm Hg.) Vapor Density (Air =1) Solubility in Water No Appearance and Odor NA Specific Gravity <H,0 = 1) NA Melting Point NA Evaporation Rate (Butyl Acetate = 1) U0h, Tan ,0 0afk Qray c^,. Frictlon Material Odor 1.8-2.8 NA '0 _ Warner fiRr.34.nnnnn4 FP#2 Form #1 SCF-ABEX-2894 Page 2 of 3 SECTION IV - Fire and Explosion Hazard Data Flash Point (Method Used) MA NA Extinguishing Media Water, (C(as8 A g or c) Flammable Limits NA LEL UEL Special Fire Fighting Procedures Positive pressure self-contained breathing apparatus should be used. Personnel not having suitable respiratory protection should leave the area to prevent significant exposure to toxic combustion gases Irom any source. Unusual Fire and Explosion Hazards ^ Stability Unstable SECTION V - Reactivity Data Conditions to Avoid ^ 1 Stable Incompatability (Materials to Avoid) X Hazardous Decomposition or Byproducts Hazardous Polymerization May Occur Will Not Occur Incomplete combustion will create carbon monoxide and dioxide. Conditions to Avoid X Route(s) of Entry: SECTION VI - Health Hazard Data Inhalation? ygg Skin? ygg Ingestion ? y0g Health Hazards (Acute and Chronic) ' Some persons may be sensitive to cashew resins and develop dermatitis-type problems. Dust of asbestos, silica, talc, graphite, carbon black, and coal can produce pneumoconiosis and other lung damage. Metal dusts can be irritants of the eyes and upper respiratory system. There is little evidence of chronic Industrial poisoning from iron, aluminum, and zinc dusts. Copper may cause keratinizatlon and discoloring of the skin. Chronic intoxication from copper Is rare and only in. persons with Wilson's Disease. Zinc and copper can produce metal fume fever, but is generally associated with exposures to freshly generated fume of those alloys (molten state). Carcinogenicity: Asbestos NTP? Yes IARC Monographs? Yes OSHA Regulated? No Signs and Symptoms of Exposure Cashew Resins -- skin eruptions similar in appearance to poison' Ivy. Pneumoconiosis -- coughing, wheezing, shortness of breath, impaired pulmonary function. Copper may produce metallic taste in mouth and nausea. Small amounts of ingested copper induces vomiting. Dusts in eye may cause irritation. Gastrointestinal disturbances possible from ingestion. Medical Conditions Generally Aggravated by Exposure Copper exposure and Wilson's Disease Emergency and First Aid Procedures Should not be necessary from the handling of this product. FP#2 Warner SBC-23-000003 Form #1 Page 3 of 3 SECTION VII - Precautions for Safe Handling and Use Steps to Be Taken In Case Material is Released or Spilled Grinding, drilling, milling, etc. can result In the release of airborne dust. Measures as outlined in Section VIII should be followed il this occurs. Waste Disposal Method Asbestos: Per 40 CFR, Part 61, 29 CFR, Part 1910.1001. Other Hazardous Ingredients: Per 40 CFR, Part 261, 262 and applicable State and Local regulations. Other Precautions Pre-employment screening for allergies and histories of skin sensitivities may be beneficial in determining persons sensitive to cashew materials. SECTION VIII - Control Measures Respiratory Protection ( Specify Type) niosh approved forpneumoconiosis - fibrosis producing dusts and dusts with TLV not less than 0.05 mg/M3. Ven,i,aHon Local Exhaust For dust exposures exceeding TLV. ' Mechanical (General) Not recommended for dust exposures. Special NK 0the, Barrier creams for persons with skin sensitive to cashew resins. Protective Gloves Recommended for persons with skin sensitive to cashew resins. Eye Protection Should not be needed for normal handling of product. Eye protection is good practice where dust is propelled by grinding or drilling activities. Other Protective Clothing or Equipment Long sleeved shirts or other protective clothing may be beneficial to prevent skin contact of persons sensitive to cashew resins. Work/Hygienic Practices Employees should be properly instructed in the use of control measures as Indicated above when there is a need for it. If dust from this product is produced, unnecessary exposures should be avoided by using a vacuum in place of dry brooming. Use wet method of cleaning for other surfaces. Proper and adequate personal hygiene should be practiced by exposed workers. NA - Not Available NK - Not Known Warner SBC-25-000006 Form #1