Document a4DZvBNj56dxwL6vd41qJGNGa

HNflPflb AutoCare FORD SLIDING CALIPER SERVICE TIPS Ford has issued a bulletin recommending that when servicing the Sliding Caliper, that the machined surfaces on the Anchor Plate and Caliper be wire brushed, to remove any rust or other corrosion. When re-assembling the Caliper Assembly onto the Anchor Plate, lubricate the surfaces indicated in the illustration, with a high temperature grease and remove any excess lubricant to prevent contamination of the disc pads. NN-2-13-79 Also recommended, is checking the dust shields to determine if they are adjusted correctly. They can be adjusted by bending, as shown in the illustration, to a dimension of 5/8". This is measured from the dust shield to the rotor face. Incorrect adjustment may result in a difference in cooling and brake response between the two disc brake assemblies. 11