Document ZnGG9gGrJMQ3Jq0MZgDqNe7rZ
FILE NAME Deere & Company DC
DATE 1979 Jan 15
DOC DC102
DOCUMENT DESCRIPTION Incomplete internal memo Asbestos - Deere & Company Use and Control
DEERE & COMPANY
JOHN DEERE ROAD MOLINE ILLINOIS 61265
Safety & Environment
15 January 1979
N. N. Sacks OFFICE
ASBESTOS - DEERE & COMPANY USE AND CONTROL
Deere & Company has been monitoring production asbestos November 1968 January 1969 - Waterloo complete survey
with a measured concentration of 3 MPPCF
operations since
TLV 5 MPPCF
On 7 December 1971 an emergency temporary to asbestos fibers was published in the Federal were held during March 1972
standard
Register
concerning exposure and public hearings
OSHA published the permanent standard for asbestos on 7 June became effective 7 July 1972 and designated as 1910.1001
1972 which
In a letter dated 12 June 1972 the Industrial Hygiene Department alerted the Deere & Company factories of the new standard and asked each unit to identify any potential exposures As these operations were identified the required monitoring was performed
On 7 June 1977 a second letter was sent to all factory Safety Directors calling attention to an asbestos substitute called Refrasil It was suggested that all units investigate the elimination or substitution of asbestos containing materials wherever possible
On 28 August 1978 the Industrial Hygiene Department alerted the Deere & Company factories to the potential asbestos content of refractory materials
used in heat treat furnaces
Copies of the above 3 letters are attached In addition this department
continues to monitor any potential exposures to asbestos on a routine basis
We are constantly on alert for any other potential exposures in our frequent visits to the units In production processes involving asbestos materials such as brake bonding and clutch plates positive exhaust ventilation is used to
control the dust generation Procedures for safe collection and disposal of the residue have been established In maintenance areas or during infrequent
NICHOLS0001882