Document YrpORBGeEKENG16o6bjdk4kk0
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
May 4, 1977
TO:
-Mi; M. A. Palmowski - GM-eago-- >
Mrr"G. Ft~Fuwler----Marietta
Mr .--JT^Van'- Por Lland"
Mr-r-E-r_lrr_Aars'e'fr~^PortrtaTid--
Ms v--R; In Dixofl - Pcrrtriand
Mr-r-A- _ . -------------------
:on
-Mr-. C.
Tigard Lat
Mr7_E. B. Hoiiingswj. Lh - WirlmLng-ten
Enclosed please find the following NEW Chicago, Illinois Plant Formulas:
C-952 C-934
ALL PURPOSE COMPOUND TOPPING COMPOUND
NEW NEW
The following Chicago, Illinois Plant Formulas have been Cancelled:
C-936 C-956 C-970 C-973 C-974 C-976
TOPPING COMPOUND ALL PURI'OSE COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS)
CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-952 C-934 C-936 C-956 C-970 C-973 C-974 C-976
ALL PURPOSE COMPOUND TOPPING COMPOUND TOPPING COMPOUND ALL PURPOSE COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS)
NEW NEW CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED
SIGNED -iLhJL
WNG/gvp 5/4/77
PLANT
DATE S7V 12
SGP 0017159
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
TO;
*MrT_ET~Trr-Aasen------ Portland" -Ms-: R. L-.- -Dixon----- Portland-- -Mr. jT"Vdir~- Por-tT-artd-- "Mt7~A. j. PetraTime---WHmin gton
Tigard Lab3<>**c;0M?Yarr^ie.vtta
September 2, 1977
Enclosed please find the following Chicago Illinois, Plant Formula revisions and cancellations:
C-903 C-923 C-953 C-934 C-952 C-978
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND ALL PURPOSE JOINT COMPOUND TOPPING COMPOUND ALL PURPOSE COMPOUND READY MIX FILLER
REVISED REVISED REVISED CANCEL CANCEL REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-903 C-923 C-953 C-934 C-952
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND ALL PURPOSE JOINT COMPOUND TOPPING COMPOUND ALL PURPOSE COMPOUND
REVISED REVISED REVISED CANCEL CANCEL
SGP 0017160
May 4, 1977 Formula C-952 NEW
CHICAGO, ILLINOIS PLANT FORMULA ALL PURPOSE COMPOUND C-952____
DESCRIPTION OF PRODUCT - All Purpose compound for taping, finishing and spotting nailheads. For Ecker shipments only.
FORMULA Raw Material
RM Spec
Percent
Lbs/Batch
Mica
. ''
Pyrophylite
Minugel FG
Celatom MW 27
Limestone
Petro AD
Vancide
Natrosol
Zinc Oxide
Soda Ash
Borax
Staramic 747
Casein
Mill
Aluminum Sulfate
11 -
-
13 126 143 170 119
32 37 192 10 196 -
12.0000 5.0000 2.5000 2.0000
72.7275 .1000 .0750 .4000 .0600 .2000 .1000
2.7500 2.0000
.0250 .0625
480.0 200.0 100.0
80.0 2909.1
4.0 3.0 16.0 2.4
8.0
4.0 110.0
80.0 1.0 2.5
100.0000
4000.0
SPECIFICATIONS
- Testing Procedure Maximum Minimum Average
Working Consistency Alkalinity - p
No. 32 No. 34
65 58 62
8.6
8.2
8.4
Working Proper ies
No. 33 - Wet mix shall be plastic working and free of grit or coarse particles.
Crack Resistance-
No. 37 - There shall be at most only a couple of fine cracks in the wedge.
Color
- White or yellow* Dried compound shall match the color of a standard sample and be free of color streaks.
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG/gvp
SGP 0017161
April 22, 1977 _ . Formula C--950- ' NEW
CHICAGO, ILLINOIS PLANT FORMULA ALL PURPOSE COMPOUND C-95^ 9 2-
DESCRJP.TION OF PRODUCT - All Purpose compound for taping, finishing Rimthinir nailhftaHs. For F.cker shipments
LAV; MATERIAL
% LBS/BATCH '
......................................................-
...........................
........................................
MICA FYHOPHYLITE
II
12 5
MINUGEL FG
'-- - 2.5
CELATOM MV/ 27 '--* > / 2.0
LIMESTONE |S iT-tfyi'ys 7Qr<li17(J
PETRO AD
. 10
VANCIDE
mb
.075
NATROSOL
1*70
.40
ZINC OXIDE SODA ASH
l IS: 37-
.06 .20
BOiiAX 37 . 10
STARAMIC 747 t<kz- rM
CASEIN
IO
St-5 7..-? 6 2.0
Ml 1 1
l<?i'0
.025
ALUMINUM SULFATE
. .0625
TOTALS
100%
480 200 . 100
80
aoio-H.
4.0 3.0 16.0 2.4 8.0 4.0 l-OOi-O 80.0 1.0 2.5
\\0>D
4000.0
;ch
.5 .5
I
nv.rMn
Working Consistency Alkalinity - pH
Working Properties
mum
<s>
No. 32
-6g
58
No. 34
912
&T&
9t6
`S'. 6
No. 33 - Wet mix shall be plastic working
and free of grit or coarse particles.
Crack Resistance
No. 37 - There shall be at nost only a couple of fine cracks in th-j wedge.
Color
- White or yellow* Dried compound shall match uhe color of a standard sample and be free of color streaks,
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG:j g
SGP 0017162
SGp 0017163
March 29# 1965 NEW FORMULA
Paoll Laboratory
AKRON. NEW YORK PLANT FORMULA
ALL PURPOSE COMPOUND AK-953
DESCRIPTION OF PRODUCT - White multi-purpo3e Compound for taping, finish ing, spotting nallheada and texturing. .
FORMULA Raw Materials
Source
R .M. Spec ,,
%
Lbs o/Bat!
Vanelde 5lZ Petro - AD Natrosol 250 HXR
(Fine Grind) . Zinc Oxide Soda Ash Borax (Powdered) Casein 100 M
Asbestos 7RF9 Mica P80H Halco 71-D5 Limestone
R. T. Vanderbilt The Thornley Co.
Hercules PGwder Mallinkrodt Co. Open Market Riverside Chem. Co. International Casein Co. Phillip Carey Western Mica Co. Naloo Chemical Co. Thomaon-W einman
126 143
119 32
10 9
11
13
0.075 0.10
0.30 0.35 0.40
o.i5
4.5 5.5
16.0 0.025
72.6
3.0 4.0
12 o0 14.0 16.0
6.0 180.0 220.0 640.0
1.0 2904.0
100o000 4000.0
WORKING CONSISTENCY - Refer to Plant Tea tine? Procedure No. 32.
Specifications:
Maximum
Minimum
AvercKO
72 66
69
ALKALINITY - Refer to Plant Testing Procedure no. 34.
pH Specifications*
Maximum
Minimum
Average
9.2 8.9
9c0
Minimum soda ash content ~ 040
WORKING PROPERTIES - Refer to Plant Testing Procedure No. 33*>
' "`Specifications:
Wet mix shall be plastic and buttery working and
free of grit or coarse particles.
SORDINO PROPERTIES
kpoci^loatlons;
Refer to Plant Testing Procedure No. 35 After compound has dried, tape shall delaminate
when peeled back.
CRACK RESISTANCE Specifica'clona:
There shall be at most only a couple of very small cracks in the wedge.
COLOR SpecifleatIons:
Dried compound should be e neutral color and match the standard sample.
JDRtse
SGP 0017164
April 19, 1965 Supersedes Formula No. AK-953 Dated March 29, 196$
AKRON. NEW YORK PLANT FORMULA
ALL PURPOSE COMPOUND AK-953
DESCRIPTION OF PRODUCT ** White multi-purpose Compound for taping, finish ing, spotting nailheads and texturing0
-/ FOB MOLA
Raw Materials
Vaneide 5lZ Petro AD Natrosol 250 HXR
(Fine Grind) Zinc Oxide Soda Ash Borax (Powdered) Casein 100 M Asbestos 7RF9 Mica P80H Nalco 71-D5 Limestone
Source
R. M. Spec * % Lb3./Batch
R. T. Vanderbilt The Thornley Co.
126
0.075
3.0
143 0.10 4.0
Hercules Powder
Malllnkrodt Co. Open Market Riverside Chem. Co. International Casein Co. Phillip Carey Western Mica Co. Nalco Chemical Co. Thomson-WeInman
170 119
32
10 9
11
13
0.30 0.10 0.40 0.15 4.5 5.5 16.0
0.025 72.85
100.000
12.0 4.0 16.0 6.0
180.0 220.0 640.0
1.0 2914.0
4000.0
WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32
Specifications:
Maximum
Minimum
Average
72 66 69
ALKALINITY - Refer to Plant Testing Procedure No. 34*
~ pH Specificationss Maximum
Minimum
Average
9.2 8o3 9.0
Minimum coda ash content - 040^
WORKING PROPERTIES - Refer to Plant Testing Procedure No. 33
kpeclUca-blons:
Wet mix shall be plastic and buttery working and
" free of grit or coarse particles.
BONDING PROPERTIES - Refer to Plant Testing Procedure No. 35.
$peclficstions:
After compound has dried, tape shall delaminate
when peeled back.
CRACK RESISTANCE St> oci fi c a tions:
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
Dried compound should be a neutral color and match the standard sample.
JDRtse
SGP 0017165
om
ilOO
[0M3KI
August 22, 1969 Supersedes Formula AK-953 Dated April 19, 1965
AKRON. NEW YORK PLANT FORMULA
ALL PURPOSE COMPOUND AK-953
DESCRIPTION OF PRODUCT - White multi-purpose Compound for taping, finishing spotting nailheads and texturing.
FORMULA Raw Materials
Source
Vancide 51Z Petro-AD Natrosol 250 HXR
(Fine grind) Zinc Oxide Soda Ash Borax (Powdered) Casein 100 M Asbestos 7RF9 Mica P80H Defoamer Mill
Limestone
-/Fungicide -/Wetting Agent
-/Water retention -/Viscosity stabilizer -/Alkaline source -/Alkaline source -/Adhesive -/Bulking agent -/Anti-cracking agent -/Anti-foaming agent -/Filler
R.M. Spec. Percent
126 143
0.075 0.10
170 119
32
10 9
11 196
13
0.30 0.10 0.40 0.15 4.5 5.5 16.0 0.025 72.85 100.000
Lbs./Batch
3.0 4.0
12.0 4.0
16.0 6.0
180.0 220.0 640.0
1.0 2914.0 4000.0
'
WORKING CONSISTENCY Specifications:
- Refer to Plant Testing Procedure No., 32.
Maximum
Minimum
Average
72 66 69
ALKALINITY
- Refer to Plant Testing Procedure No.,34.
pH Specifications:
Maximum
Minimum
Average
9.2 8.8 9.0
Minimum soda ashi content - 0.40%
WORKING PROPERTIES* Specifications:
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
- Refer,to Plant Testing Procedure No. 35. After<compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE Specifications
There, shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
Dried compound should be a neutral color and match the standard sample.
-/ Denotes change, in this reissue. EDO:dek
\
SGP 0017166
April 15, 1971 Supersedes AK-953 Dated 8/22/b9
AKRON, NEW YORK PLANT FORMULA
./ ALL PURPOSE JOINT COMPOUND AK-953
DESCRIPTION OF PRODUCT - White multi-purpose Compound for taping, finishing, spotting nailheads and texturing.
FORMULA Raw Materials
Source
Vancide 51Z Petro-AD Natrosol 250 HXR
(Fine grind) Zinc Oxide Soda Ash Borax (Powdered) Casein 100 M Asbestos 7RF9 Mica P80H Defoamer Mill Limestone
-/Fungicide -/Wetting Agent
-/Water retention -/Viscosity stabilizer -/Alkaline source -/Alkaline source -/Adhesive -/Bulking agent -/Anti-cracking agent -/Anti-foaming agent -/Filler
i
R .M. Spec . Percent
126 143
0.075 0.10
170 119
32
10 9
11 196
13
0.30 0.10 0.40 0.15 4.5 5.5 16.0 0.025 72.85 100.000
Lbs. /Ba t(
3.0 4.0
12.0 4.0
16.0 6.0
180.0 220.0 640.0
1.0 2914.0 4000.0
WORKING CONSISTENCY Specifications;
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
72 66 69
ALKALINITY pH Specifications:
Minimum soda ash content
Refer to Maximum
9.2 0.40%
Plant
Testing Procedure Minimum
8.8
No. 34. Average 9.0
WORKING PROPERTIES Specifications:
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working' and free of grit or coarse particles.
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE Specifications
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
Dried compound should be a neutral color and match the standard sample.
-/ Denotes change in this reissue. EDO:dek
SGP 0017167
SGP 0017158