Document YjpKMXdMMD4yDQzVkwR6B8NRV

DownloadSearchable PDFRandom document
October 29, 1968 NEW FORMULA PLAINTIFF'S EXHIBIT ` ACME, TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-977-Y (HAND TOOLS') (READY MIX "X") DESCRIPTION OF PRODUCT Ready Mixed Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Water Filler TEX-970 Ucar WC-130 Benzoflex 50 Yellow Oxide 2087 Source Solvent Body Adhesive Plasticizer Pigment R.M. Spec. 185 183 139 7o Act. Ingr. ,, 91.315 8.00 0.50 .185 100.000 Lbs./Batch 400 0 (48 gal.)* 700.0 53.3 4.0 .65 1162.95 * Approximately 52 lb./lOO lbs. of active ingredients (this may vary + 2 gallons per batch). ** One batch yields 17 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. TESTING PROCEDURE Working Consistency - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If Paste is not proper working consistency, a maximum of 5 c. c. water per 150 grams of paste may be added to adjust. Brabender - 580+ -20 /O Working Properties - Refer to Plant Testing Procedure No. 33 Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing. Bonding Properties Refer to Plant Testing Procedure No. 35. Specifications After compound has dried, tape shall show at least 90% fiber tear when delaminated. Crack Resistance Refer to Plant Testing Procedure No. 37. Specifications: Color: / Specifications: There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. Yellow Dried compound shall match color of standard sample. tv n . i,, SGP 0018109 October 29, 1968 NEW FORMULA ' ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-977-Y (HAND TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT Ready Mixed Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Water Filler TEX-970 Ucar WC-130 Benzoflex 50 Yellow Oxide 2087 Source Solvent Body Adhesive Plasticizer Pigment R.M. Spec. . 185 183 139 % Act. Ingr. . 91.315 8.00 0.50 .185 100.000 Lbs./Batch 400.0 (48 gal.)' 700.0 58.3 4.0 .65 1162.95 * Approximately 52 lb./100 lbs. of active ingredients (this may vary + 2 gallons per batch). ** One batch yields 17 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. TESTING PROCEDURE Working Consistency - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If Paste is not proper working consistency, a maximum of 5 c. c. water per 150 grams of paste may be added to adjust. Brabender - 580+ -20IO , Working Properties - Refer to Plant Testing Procedure No. 33 Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispcrsed particles. Material shall be free from lumps due to incomplete mixing. Bonding Properties Refer to Plant Testing Procedure No. 35. Specifications After compound has dried, tape shall show at least 90% fiber tear when delaminated. Crack Resistance Refer to Plant Testing Procedure No. 37. Specifications: / Color: S pe cific ations: There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. Yellow Dried compound shall match color of standard sample. RRB:kgc SGP 0018110 SGP 0018108