Document YjGkxReaLLq95aR2jyLv7NgZO

Eaton' Single Drive Axles (for 4x2 Kenworth Trucks) Axle Capacity--lbs. (at ground) 23,000 Kenworth Model (1) W900, K100, L700 (Up to 85,000 lbs. GCW Highway, 110,000 lbs. on turnpike) Axle Type Single Red. Single Red. w/DriverControlled T raction Differential Eaton' Dual Drive Axles (for 6x4 Kenworth Trucks) Axle Capacity--lbs. (at ground) Kenworth Model (1) Axle Type 38,000 W900, K100, C500, L700 (Up to 130,000 lbs. GCW) Single Red. Dual Range PDR(2) 40,000 44,000 48,000 W900, K100, C500, L700 (Up to 155,000 lbs. GCW) W900, K100, C500, L700 (Up to 155,000 lbs. GCW) W900, K100, C500, L700 (Up to 170,000 lbs. GCW) Single Red. Dual Range PDR Single Red. Dual Range PDR Single Red. Dual Range PDR Eaton Axle Model 23121 23421 Eaton Axle Model DS381 (3) DS381-P(3) DT381 DT381-P DP381 DP381-P (6) DS401-P(3) DT401-P(6) DP401-P(6) DS440-P(3) DT440-P DP440-P (6) DS480-P(3) DT480-P DP480-P (6) 58,000 65,000 W900, C500 (Up to 150,000 lbs. GCW) PDR PDR DP580-P(4) DP650-P (4) (1) GCW ratings are normal maximum capacities. Refer to back page chart for details. (2) Planetary Double Reduction. (3) Available with Eaton Driver-Controlled Traction Differential. (4) Available with or without inter-axle differential, in either standard or high-entry tandems. (5) Available 1st quarter 1982. (6) Not available for L700. Ratios 3.55, 3.70, 3.90, 4.11,4.33, 4.56, 4.88, 5.43, 6.17, 6.67 Ratios Single Reduction: 3.55, 3.70, 3.90, 4.11, 4.33, 4.56, 4.88, 5.29, 5.57, 6.14, 6.50, 7.17 Dual Range: 3.55/4.84(5), 3.70/5.05,3.90/5.31 (5), 4.11/5.61, 4.33/5.91, 4.56/6.21,4.88/6.65, 5.29/7.21, 5.57/7.60, 6.14/8.38, 6.50/8.86, 7.17/9.77 Planetary Double Reduction: 4.84(5), 5.05, 5.31(5), 5.61, 5.91, 6.21, 6.65, 7.21,7.60, 8.38, 8.86, 9.77 3.90, 4.11, 4.33, 4.62, 5.29, 6.17 3.90/5.31, 4.11/5.60, 4.33/5.90, 4.62/6.30, 5.29/7.20, 6.17/8.40 5.31, 5.60, 5.90, 6.30, 7.20, 8.40 3.70, 4.11, 4.33, 4.56, 4.88, 5.43, 6.17 3.70/5.04, 4.11/5.60, 4.33/5.90, 4.56/6.21, 4.88/6.64, 5.43/7.39, 6.17/8.40 5.04, 5.60, 5.90, 6.21, 6.64, 7.39, 8.40 High-entry and Standard Tandems with 1:1 helical gears: 5.04, 5.60, 5.90, 6.21, 6.64, 7.39, 8.40 High-entry Tandems with 1.2:1 helical gears: 6.05, 6.72, 7.08, 7.45, 7.97, 8.87, 10.08