Document YGj0a8YzqqnpNDqDrm92NMvBk
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
SPECIFICATION
2778-P-l --------- o --------PIPING MATERIALS
CONTRACT NO.: CPD-2778
CLIENT:
0)
PPG INDUSTRIES, INC.
0) LOCATION: REVISIONS:
LAKE CHARLES, LA
A) DECEMBER 6, 1977 0) FEBRUARY 7, 1978 1) MARCH 15, 1978 2) MAY 8, 1978 3) OCTOBER 3, 1978
rD. Cel Han r /-?,
made by: checked BY: APPROVED BY: APPROVED BY: APPROVED BY:
c. W. QUOLKE JR. l. H. ALEXANDER R. L. GIBSON L. C. JOINER
I BB 0011993*7
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
Piping Materials
STANDARD SPECIFICATION NO. PL~4 REV._____ 1
PRESSURE AND TEMPERATURE LIMITATIONS^ tO 1 50 psiG @
DEG- F
0) CONSTRUCTION: 1" AND UNDER - SCREWED; 3/4" AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE 1-1/2" AND UNDER 1.14 C.S. A106 GR A OR B, SMLS, SCH 80
1) 2" THRU 10" INCL 1.13 C.S A53 GR A OR B, SMLS, SCH 40 12" THRU 24" INCL 1.9 C.S.A53 GR A OR B, SMLS, 0.375" WALL
V) FITTINGS
1" AND UNDER 1-1/2" SIZE
2.16 F.S., A!05, SCR'D, 3000 LB. WOG 2.2 C.S. BUTT WELD, EX STRONG
UNIONS &
FLANGES
0) 0) 0)
2" THRU 10" INCL 2.1
12" THRU 24" INCL 2.3
1" AND UNDER
3.4
1-1/2" SIZE
4.5
2" THRU 10" INCL 4.3
12" THRU 24" INCL 4.6
C.S. BUTT WELD, SCH 40 C.S. BUTT WELD, 0.375" WALL F.S, A105 SCR'D UNION, 3000 LB. WOG
C.S., WELD NECK, EX STG, 150 LB. ANSI B16.5 RF C.S. , WELD NECK, SCH. 40, 150 LB. ANSI B16.5 RF C.S., WELD NECK, 0.375" 150 LB. ANSI B16.5 RF
SHUT-OFF 1" AND UNDER
V24B F.S. GATE VA FULL PORT O.S. & Y., SCR'D 600 LB. (5.29)
1-1/2" TO 24"INCl V31B C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.32)
-
<n THROTTLE 1" AND UNDER
V-112B F.S. GLOBE VA O.S. & Y., SCR'D 600 LB.
Hi >
(6.31)
-J
;
<
> 1-1/2" TO 14"INCl V-163B C.I. GLOBE VA O.S. & Y., FLG'D., 125#
CHECK
1" AND UNDER
V168 F.S. SWING CHECK, SCR'D, 600 LB. (7.37)
1-1/2" TO 24"INCl V-34 C.I. SWING CHK., ALL IRON, FLG'D 125# (7.31)
JOINT MAT'L. FOR SCREWED JOINTS
20.5 JOHN CRANE PLASTIC LEAD #2
GASKETS
0) 0) BOLTS 0)
19.20 COMPRESSED ASBESTOS 1/16" THK GRAPHITE 900
21. 3 ALLOY STEEL .STUD BOLTS W/HEX NUTS A193 GR B7 W/A194 GR 2H NUTS,
NOTES:
0)
] % USE ITEM FLAT FACE FLANGES AT CAST IRON VALVES AND EQUIPMENT. 2. USE ITEM 2.33 C. S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS
J BB 0011994 |
1 i
Ci 2778-P-l - Page 3 s OCL
Piping Materials
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO.__ PL-9
REV.
0
PRESSURE AND TEMPERATURE LIMITATIONS^ tO 1 50 pS|G a 1?! 0^ DEG. F
CONSTRUCTION: 1" AND UNDER - SCREWED; 1-1/2" AND OVER - WELDED AND FLANGED
ITEM PIPE
SIZE
1-1/2 AND UNDER
ITEM
DESCRIPTION
1.4 C.S. A106 GR A OR B, WELD OR SMLS, SCH 80
2" THRU 10" INCL 1.5 C.S. A53 GR A OR B, WELD OR SMLS, SCH 40
12" THRU 24" INCL 1.7 C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL
FITTINGS
UNIONS &
0) FLANGES 0) 0)
1" AND UNDER
2.16
1-1/2" SIZE
2.2
2" THRU 10" INCL 2.1
12" THRU 24" INCL 2,3.
1" AND UNDER
3.4
1-1/2" SIZE
4.5
2" THRU 10" INCL 4-3
12" THRU 24" INCL 4.6
F.S. A105, SCR'D, 3000 LB. WOG
C.S. BUTT WELD EX STRONG
C.S. BUTT WELD, SCH 40 C.S. BUTT WELD. 0.375" WALL F.S. A105 SCR'D UNION, 3000 LB. WOG
C.S., WELD NECK EX STG 150 LB. ANSI B16.5 RF C.S., WELD NECK SCH.40, 150 LB. ANSI B16.5 RF C.S., WELD NECK 0.375", 150 LB. ANSI B16.5 RF
SHUT-OFF 1" AND UNDER
V35A C.I. GATE VA IBBM SCREWED 200# WOG (5.34)
1-1/2" THRU 24" INCL
V31 C.S. GATE VA O.S. & Y. FLG'D 150# RF (5.37)
(0 THROTTLE 1" AND UNDER U>J <> 1-1/2" THRU 12"
INCL
CHECK
1" AND UNDER
2" THRU 24" INCL
V69 BRZ GLOBE VA SCREWED 400# WOG (6.26)
V79 C.S. GLOBE VA O.S. & Y. FLG'D 150# RF (6.37) V236 BRZ SWING CHECK VA SCREWED, 125# SSP (7.38)
V40 C.I. SWING CHECK VA FLG'D 125# FF (7.32)
JOINT MAT'L. FOR SCREWED JOINTS
20.5 JOHN CRANE PLASTIC LEAD #2
GASKETS
0) 0) BOLTS 0)
0) notes:
^ 2.
19.20 COMPRESSED ASBESTOS 1/16 THK, GRAPHITED, GARLOCK 900
21.3 ALLOY STEEL STUD BOLTS W/HEX NUTS A193 GR B7 W/A194 GR 2H NUTS,
USE ITEf1 FLAT FACE FLANGES AT CAST IRON VALVES AND EQUIPMENT
USE ITEM 2.33 C.S. AI06 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
| BB 0011995 J
2778-P-l - Page 4
Piping Materials
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO. PL-12 REV,___ 1
PRESSURE AND TEMPERATURF LIMITATIONS: 0 tO ISOpsiGe ^0 DEG. F
o; CONSTRUCTION: 1" AND UNDER - SCREWED; 1-1/2" AND OVER WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B, WELD OR SMLS, SCH 80
2" THRU 10" INCL 1.5 C.S. A53 GR A OR B, WELD OR SMLS, SCH 40
0) FITTINGS
12" THRU 24" INCL 1.7 1" AND UNDER 2.16
C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL F.S. A105, SCR'D, 3000 LB. WOG
0) 1-1/2" SIZE
2.2 C.S. BUTT WELD, EX STRONG
o: 2" THRU 10" INCL 2.1 C.S. BUTT WELD, SCH 40
12" THRU 24" INCL 2.3 C.S. BUTT WELD, 0.375" WALL
UNIONS &
00]] FLANGES 0)
1" AND UNDER
3.4
1-1/2" SIZE
4.5
2" THRU 10" INCL 4.3
12"- THRU 24" INCL, 4.6
F.S. A105 SCR'D UNION, 3000 LB. WOG
C.S., WELD NECK EX STG 150 LB. ,ANSI B16.5 RF C.S., WELD NECK SCH 40 150 LB.,ANSI B16.5 RF C.S., WELD NECK 0.375" 150 LB., ANSI B16.5 FF
SHUT-OFF 1" AND UNDER
V35 C.I. GATE VA IBBM SCREWED 200# WOG (5.33)
1-1/2" TO 24" INCL
V31 C.S. GATE VA 0,S. & Y. FLG'D 150# RF (5.37)
-
CO THROTTLE 1" AND UNDER L>U
<> 1-1/2" TO 12" INCL
CHECK
1" AND UNDER
2" TO 24" INCL
V69 BRZ GLOBE VA SCREWED 400# WOG (6.26)
V79 C.S. GLOBE VA O.S & Y. FLG'D 150# RF (6.37)
V236 BRZ SWING CHECK, SCREWED, 125# SSP (7.38)
V40 C.I. SWING CHECK VA FLG'D 125# FF (7.32)
JOINT MAT'L. FOR SCREWED JOINTS
20.5 JOHN CRANE PLASTIC LEAD #2
GASKETS
0) 0) BOLTS
19.20 21. 3
COMPRESSED ASBESTOS 1/16" THK GRAPHITE GARLOCK 900
ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2H .
NOTES:
0) 1. USE ITEM FLAT FACE FLANGES AT CAST IRON VALVES-AND EQUIPMENT. 2. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
NOT REQUIRED'FOR THIS PROJECT
-I----B--B-+i -0--0--1--1--9--9--6--- 1| I
2778-P-l - Page 5
Piping Materials
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO. PL 14 REV. 1
1) PRESSURE AND TEMPERATURE LIMITATIONS: 0-150 PSIG e^Vo 500 DEG. F
1) CONSTRUCTION: 3/4*' AND UNDER - SCRElv ED: 1" AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
1) PIPE 1) 1)
1-1/2" AND UNDER 1.4 2" THRU 10" INCL 1.5 12" THRU 24" INCL 1.7
C.S. A106 GR A OR B, WELD OR SMLS, SCH 80 C.S. A53 GR A OR B, WELD OR SMLS, SCH 40 C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL
1) FITTINGS 1) 1) 1)
1) UNIONS & 1) FLANGES 1) 1)
3/4" AND UNDER 1" THRU 1-1/2" INCL 2" THRU 10" INCL 12" THRU 24" INCL
2.16 2.2 2.1 2.3
3/4" AND UNDER 1"THRU 1-1/2"INCL
2" THRU 10" INCL 12" THRU 24" INCL
3.4 4.5 4.3
4.6
F.S. A105 SCRD, 3000 LB WOG C.S. BUTT WELD, EX. STRONG C.S. BUTT WELD, SCH 40 C.S. BUTT WELD, 0.375" WALL
F.S. A105 SCRD UNION, 3000# WOG C.S. WELD NECK, EX STG, 150 LB ANSI B16.5 RF C.S. WELD NECK, SCH 40, 150 LB ANSI B16.5 RF C.S. WELD NECK, 0.375", 150 LB ANSI B16.5 RF
1)
SHUT-OFF 3/4" AND UNDER
V24A
F.S. GATE VA. FULL PORT O.S.&Y. SCRD 600 LB
1) (5.28)
1)
1" AND OVER
V31A C.S. GATE VA. O.S.&Y FLGD 150# RF
1) (5.31)
-
1) THROTTLE 3/4" AND UNDER
1) Ui
1) 1)
<->1
1" AND OVER
1) CHECK 3/4" AND UNDER
1) 1) 1" AND OVER
1)
V112A (6.30) V79A (6.28)
F.S. GLOBE VA O.S.&Y. SCRD 600 LB C.S. GLOBE VA O.S.&Y. FLGD 150# RF
VI27 (7.36) V80 (7.33)
F.S. LIFT CHECK, SCRD 600 LB C.S. SWING CHECK, FLGD 150# RF
1) JOINT MAT'L. FOR SCREWED JOINTS 20.6
COPALTITE THREAD COMPOUND
1) GASKETS 1)
1) BOLTS 1)
1) NOTES: i
19.20 21.3
COMPRESSED ASBESTOS 1/16" THK GRAPHITE GARLOCK 900
ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2H
USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
I BB 0011997 1
2778-PI. - Page 5a
r\
Piping Materials
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO. pt--15
REV._______ 0 . ...............................~--T-T-------------------------------- ------------------------------- ' PRESSURE AND TEMPERATURE LIMITATIONS:0 to 300pS|fl 75Q DEG. F
0) construction: 3/4"AND UNDER - SCREWED; 1"
ITEM
SIZE
ITEM
AND OVER - WELDED AND FLANGED
DESCRIPTION
PIPE 1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B, WELD OR SMLS, SCH 80
2" THRU 10" INCL 1.5 C.S. A53 GR A OR B, WELD OR SMLS, SCH 40
0) FITTINGS
3/4" AND UNDER 2.16 F.S. A105, SCR'D, 3000 LB. WOG
0)
UNIONS & FLANGES
0) 0)
v' THRU 1-1/2" INCL 2" THRU 10"
3/4" AND UNDER
2.2 2.1
3.4
1" AND 1-1/2" SIZE : 4.19 2" THRU 10" INCL 4.18
C.S. BUTT WELD, EX STRONG C.S. BUTT WELD, SCH 40 F.S. A105, SCR'D, UNION, 3000# WOG .
C.S. , WELD NECK, SCH 80, 300 LB, ANSI B16.5 RF C.S., WELD NECK, SCH 40, 300 LB. ANSI B16.5 RF
SHUT-OFF 3/4" AND UNDER (NOTE 3)
V24A F.S. GATE VA FULL PORT OS&Y SCR'D 600# (5.28)
1" AND OVER
V25A C.S GATE VALVE O.S. & Y., FLANGED 300# RF (5.30)
tfi THROTTLE 3/4" AND UNDER L>U (NOTE 3)
>< 1" AND OVER (NOTE 2)
V112A F.S. GLOBE VA O.S. & Y., SCR'D, 600# (6.30)
V74A C.S. GLOBE VA O.S. & Y., FLANGED 300# RF (6.38)
CHECK
1-1/2" AND UNDER V.127 F.S. LIFT CHECK, SCR'D 600# (7.36)
0)
2" AND OVER
V83 C.S. SWING CHECK, FLG'D, 300#
(7.34)
0) JOINT MAT'L.
GASKETS
FOR SCREWED JOINTS
20.6 COPALTITE THREAD COMPOUND 19.21 FLEXITALLIC STYLE CG.
BOLTS NOTES:
21.3 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2 H
1. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS
2. USE VALVES VI32 (6.32) AT DRIP LEGS TO TRAPS.
3. USE VALVES V266 (5.36) AND V3I0 (6.36) AT TRAPS.
| BB 011998 I
2778-P-l - Page 6
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa, 1S222
Piping Materials
STANDARD SPECIFICATION NO. REV.
PL-42
PRESSURE AND TEMPERATURE LIMITATIONS:0 to ISOPSIGa
DEG. F
CONSTRUCTION: '.1" AND UNDER - SCREWED; 1-1/2" AND OVER FLANGED AND WELDED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE 1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B} WELD OR SMLS, SCH 80
2" THRU 10" INCL 1.5 C.S. A53 GR A OR B, WELD OR SMLS, SCH 40
12" THRU 24"INCL 1.7 C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL
0) FITTINGS
1" AND UNDER
2.16 F.S. A105, SCR'D, 3000 LB. WOG
0)
0)
1-1/2" SIZE
2.2 C.S. BUTT WELD, EX STRONG
2" THRU 10" INCL 2.1
C.S. BUTT WELD, SCH 40
12" THRU 24"
2.3 C.S. BUTT WELD, 0.375" WALL
0) UNIONS &
FLANGES
0)
IV AND UNDER 1-1/2" SIZE
3.4 F.S. A105 SCR'D UNION, 3000# WOG 4. 5 C.S., WELD NECK, EX STG, 150 LB. ANSI B16.5 RF
0) 2" THRU 10" INCL 4.3 C.S., WELD NECK, SCH 40, 150 LB. ANSI B16.5 RF 0) 12" THRU 24" INCL 4.6 C.S., WELD NECK, 0.375" 150 LB. ANSI B16.5 RF
0) SHUT-OFF 1" AND UNDER V24B F.S. GATE VA FULL PORT, O.S. & Y., SCR'D 600 LB.
(5.29)
0) 1-1/2" THRU 24" V31B C.S. GATE VA O.S. & Y., FLG'D 150# RF
INCL
(5.32)
#
0) 0)
0>
0)
VALVES
THROTTLE V
AND UNDER
CHECK
1-1/2" THRU 14JI INCL
1" AND UNDER
1-1/2" THRU 16" INCL
V112B F.S. GLOBE VA O.S. & Y., SCR'D 600 LB. (6.31) V79B C.S. GLOBE VA O.S. & Y., FLG'D 150# RF (6.29)
V1-68 F.S. SWING CHECK, SCR'D, 600 LB. (7.37)
V80 C.S. SWING CHECK, FLG'D 150# RF (7.33)
JOINT MAT'L. FOR SCR'D JOINTS 20.5 JOHN CRANE PLASTIC LEAD #2
GASKETS
0)
19.20 COMPRESSED ASBESTOS 1/16" THK GRAPHITE - GARLOCK 900
0) BOLTS
21.3 ALLOY STEEL STUD BOLTS W/HEX NUTS
0) 21.4 INTERNAL LOCKWASHERS.
notes: 1. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT" INSTRUMENT CONNECTIONS
i_B_00 n 999 J
2778-P-l - Page 7
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa, 15222
Piping Materials
STANDARD SPECIFICATION NO. PL-45
REV.
0
PRESSURE AND TEMPERATURE LIMITATIONS: 0. to 150PSIG e~260tO DEG. f
CONSTRUCTION: ]" AND UNDER - SCREWED; 1-1/2 AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE 1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B WELD OR SMLS SCH 80
2" THRU 10" INCL 1.5 C.S. A53 GR A OR B WELD OR SMLS SCH 40 '
FITTINGS
1" AND UNDER
2.16 F.S. A105, SCR'D, 3000 LB. WOG
UNIONS & FLANGES
0) 0)
1-1/2" SIZE 2" THRU 10" INCL 1" AND UNDER
2.2 2.1 3.4
1-1/2" SIZE
4.5
2" THRU 10" INCL 4. 3
C.S. BUTT WELD, EX STRONG C.S. BUTT WELD, SCH 40 F.S. A105, SCR'D UNION, 3000 LB. WOG
C.S., WELD NECK, EX STG, 150 LB. ANSI B16.5 RF C.S., WELD NECK, SCH 40, 150 LB. ANSI B16.5 RF
SHUT-OFF 1" AND UNDER
V24A F.S. GATE VA FULL PORT O.S. & Y., SCR'D 600 LB. (5.28)
1-1/2" THRU 10" INCL
V31A C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.31)
VALVES
THROTTLE 1" AND UNDER
1-1/2" THRU 10" INCL
CHECK
V112A F.S. GLOBE VA O.S. & Y., SCR'D 600 LB. (6.30)
V79A C.S. GLOBE VA O.S. & Y., FLG'D 150# RF 16.281
JOINT MAT'L. FOR SCREWED JOINTS
20.6 COPALTITE THREAD COMPOUND
GASKETS
0)
0) 0) BOLTS
19.20 21. 3
COMPRESSED ASBESTOS 1/16" THK GRAPHITE - GARLOCK 900
ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2H
notes: 1. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
| BB 001^001 | 2778-P-1 - Page 9 o> a
i
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
Piping Materials
STANDARD SPECIFICATION NO. PL-45
REV.
0
PRESSURE AND TEMPERATURE LIMITATIONS: Q. to 150PSIG @~260^ DEG. F
CONSTRUCTION: y> and UNDER - SCREWED; 1-1/2 AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B WELD OR SMLS SCH 80
2" THRU 10" INCL 1.5 C.S. A53 GR A OR B WELD OR SMLS SCH 40
FITTINGS
1" AND UNDER
2.16 F.S. A105, SCR'D, 3000 LB. WOG
UNIONS & FLANGES
1-1/2" SIZE 2" THRU 10" INCL 1" AND UNDER
2.2 2.1 3.4
1-1/2" SIZE
4.5
2" THRU 10" INCL 4. 3
C.S. BUTT WELD, EX STRONG C.S. BUTT WELD, SCH 40 F.S. A105, SCR'D UNION, 3000 LB. WOG
C.S., WELD NECK, EX STG, 150 LB. ANSI B16.5 RF C.S., WELD NECK, SCH 40, 150 LB. ANSI B16.5 RF
SHUT-OFF 1" AND UNDER
V24A F.S. GATE VA FULL PORT O.S. & Y., SCR'D 600 LB. (5.28)
1-1/2" THRU 10" INCL
V31A C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.31)
VALVES
THROTTLE 1" AND UNDER
1-1/2" THRU 10" INCL
CHECK
V112A F.S. GLOBE VA O.S. & Y., SCR'D 600 LB. (6.30)
V79A C.S. GLOBE VA O.S. & Y., FLG'D 150# RF (6.281
JOINT MAT'L. GASKETS
FOR SCREWED JOINTS
20.6 COPALTITE THREAD COMPOUND
19.20 COMPRESSED ASBESTOS 1/16" THK GRAPHITE - GARLOCK 900
BOLTS
21. 3 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2H
notes: 1. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
| BB 0012001 | 2778-P-1 - Page 9
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
Piping Materials
STANDARD SPECIFICATION NO. pl~49 REV._______ Q_
PRESSURE AND TEMPERATURE LIMITATIONS^
^0psiGe
DEG. F
CONSTRUCTION: 1/2" AND UNDER - SCREWED; 3/4 AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B WELD OR SMLS, SCH 80
2" THRU 10" INCL 1.5 12" THRU 24" INCL 1.7
C.S. A53 GR A OR B WELD OR SMLS, SCH 40 C.S. A53 GR A OR B WELD OR SMLS, 0.375" WALL
FITTINGS
1/2" AND UNDER 2.16 3/4" THRU 1-1/2" 5^CVhRU 10" INCL i:f
F.S. A105 SCR'D, 3000 LB. WOG El: BUTT HftB-sS SR0NG
12" THRU 24" INCL 2.3 C.S. BUTT WELD, 0.375" WALL
UNIONS & FLANGES
0) 0)
1/2" AND UNDER
3/4" THRU 1-1/2" INCL 2" THRU 10" INCL
12" THRU 24" TNCI
3.4 4.5
4.3 4.6
F.S. A105 SCR'D UNION, 3000 LB. WOG :.S., WELD NECK, EX STG, 150 LB. ANSI B16.5 RF
:.S., WELD NECK, SCH 40 150 LB. ANSI B16.5 RF :.S.t WELD NECK, 0.375". 150 LB. ANSI B16.5 RF
SHUT-OFF 3/4" AND UNDER
V24B F.S. GATE VA FULL PORT O.S. & Y., SCR'D 600 LB. (5.29)
1" THRU 24" INCL V31B C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.32)
0) NOTE 2 3/4" SIZE 0)
V339 D.I. PLUG VA. SS PLUG FLGD 150 LB. RF (9.32)
THROTTLE 3/4" AND UNDER I(>U/)
1" THRU 14" INCL >
V112B F.S. GLOBE VA O.S. & Y., SCR'D, 600 LB. (6.31) V79B C.S. GLOBE VA O.S. & Y., FLG'D, 150# RF (6.29)
CHECK
3/4" AND UNDER
Vl-68 F.S. SWING CHECK, SCR'D, 600 LB. (7.37)
V'THRU 16"
JOINT MAT*L. FOR SCREWED JOINTS
GASKETS
0) 0) BOLTS 0)
V80 C.S. SWING CHECK, FLG'D 150# RF (7.33)
20.1 19.20
21. 3 21.4
TEFLON TAPE
COMPRESSED ASBESTOS 1/16" THK, GRAPHITE - GARLOCK
900 ALLOY STUD BOLTS W/HEX NUTS, INTERNAL LOCK WASHER
N0TES: 1. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
0) 2. USE ITEM V339 (9.32) ONLY WHERE INDICATED ON FLOW DIAGRAMS IN LIQUID 0) WASTE LINES.
2778-P-1 - Page 10
a> LBzJonroTl Si? oCL
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
Piping Materials
STANDARD SPECIFICATION NO. PL-79 REV. 0
PRESSURE AND TEMPERATURE LIMITATIONS:^ tO IbUpsiG & 07c
DEG. F
0) construction: 1" AND UNDER - SCREWED; 1-1/2" AND OVER - FLANGED AND WELDED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B WELD OR SMLS, SCH 80
0) FITTINGS 0)
UNIONS &
0) FLANGES 0) 0)
2" THRU 10" INCL 1.5
12" THRU 24" INCL 1.7
1" AND UNDER
2.16
l-rl/2" SIZE 2.2
2" Thru iom incl 2.1
12" THRU 24" INCL 2.3
1" AND UNDER
3.4
1-1/2" SIZE
4.5
2" THRU 10" INCL 4.3
12" THRU 24" INCL 4.6
C.S. A53 GR A OR B WELD OR SMLS, SCH 40
C.S. A53 GR A OR B WELD OR SMLS, 0.375" WALL
F.S. A105 SCR'D, 3000 LB. WOG
C.S. BUTT WELD, EX STRONG C.S. BUTT WELD SCH 40 C.S. BUTT WELD 0.375" WALL F.S. A105 SCR'D UNION, 3000 LB. WOG 3.S., WELD NECK EXT STG, 150 LB. ANSI B16.5 RF C.S., WELD NECK SCH 40 150 LB. ANSI B16.5 RF C.S., WELD NECK 0.375" 150 LB. ANSI B16.5 RF
0) SHUT-OFF 1" AND UNDER
V24A F.S. GATE VA O.S. & Y., SCR'D 600 LB. (5.28)
0) 1-1/2" THRU 24" V31B C.S. GATE VA O.S. & Y., FLG'D 150# RF
INCL
(5.32)
0)
UC>fti
THROTTLE
1" AND UNDER
0) <>
1-1/2" THRU 14"
INCL
0) CHECK 1" AND UNDER
0) 1-1/2" THRU 24" INCL
V112A F.S. GLOBE VA O.S. & Y., SCR'D 600 LB (6.30) V79A C.S,. GLOBE VA O.S. & Y., FLG'D 150# RF (6.38)
VI68 F.S. SWING CHECK SCR'D 600 LB (7.37)
V40 C.I. SWING CHECK IBBM FLANGED, 125# FF (7.32)
JOINT MAT'L, FOR SCREWED JOINTS
GASKETS
0) 0) BOLTS
20.5 19.20
21.3
JOHN CRANE PLASTIC LEAD #2
COMPRESSED ASBESTOS 1/16" THK, GRAPHITE - GARLOCK 900
ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS W/A194 GR 2H
NOTES:
0) 1. USE ITEM FLAT FACE FLANGES AT CAST IRON VALVES AND EQUIPMENT,
#
OJ ? n
| BB 0012003 | 1
2778-P-l - Page 11
Piping Materials
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO. PL-85
REV.
PRESSURE AND TEMPERATURE
LIMITATIONS: 0
tO
Ten~ZULO 1 5UPSIG q 350
DEG. F
CONSTRUCTION: 1" AND UNDER - SCREWED; 1-1/2" AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B, WELD OR SMLS, SCH 80
FITTINGS
2" THRU 10" INCL 1.5
12" THRU 24"INCL 1.7
1" AND UNDER
2.16
1-1/2" SIZE
2.2
2" THRU 10" INCL 2.1
12" THRU 24" INCG 2.3
C.S. A53 GR A OR B, WELD OR SMLS, SCH 40
C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL
F.S. A105, SCR'D, 3000 LB. WOG C.S. BUTT WELD, EX STRONG C.S. BUTT WELD SCH 40 C.S. BUTT WELD, 0.375" WALL
UNIONS &
FLANGES
81 0}
1" AND UNDER 1-1/2" SIZE
3.4 F.S. A105 SCR'D UNION, 3000 LB. WOG
4.5 C.S., WELD NECK EX STG, 150 LB. ANSI B16.5 RF
4-3 4.9
C S . WELD NECK SCH 40 150 LB. ANSI B16.5 RF Civ. WELD NECK 0.375" 150 LB. ANSI B16.5 RF
SHUT-OFF 1" AND UNDER
V24A F.S. GATE VA FULL PORT O.S. & Y., SCR'D 600 LB. (5.28)
1-1/2" SIZE
V31A C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.31)
2" THRU 24" INCL VI5A C.I. GATE VA IBBM, O.S. & Y., FLG'D 125# FF (5.27)
c/> THROTTLE 1" AND UNDER
V112A F.S. GLOBE VA O.S. & Y., SCR'D, 600 LB.
U>J (6.30)
_J
<> 3/4" THRU 14"INCL V79A C.S. GLOBE VA O.S. & Y., FLG'D, 150# RF
(6.38)
CHECK
1" AND UNDER
VI68 F.S. SWING CHECK, SCR'D 600 LB. (7.37)
1-1/2" SIZE 2" THRU 24" INCL
V80 C.S. SWING CHECK FLG'D 150# RF (7.33) V40 C.I. SWING CHECK IBBM FLG'D 125# FF (7.321
JOINT MAT'L. FOR SCREWED JOINTS
20.6 COPALTITE THREAD COMPOUND
GASKETS
19.20 COMPRESSED ASBESTOS 1/16" THK GRAPHITE - GARLOCK
0) 900
0) BOLTS
21.3 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS
0) A194 GR 2H.
0) NOTES: 1. USE ITEM FLAT FACE FLANGES AT CAST IRON VALVES AND EQUIPMENT.
2. USE ITEM 2.33 C.S. A106 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
| BB 0012004_2
2778-P-I - Page 13
i
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
Piping Materials
STANDARD SPECIFICATION NO. PL-123
REV.
0
PRESSURE AND TEMPERATURE LIMITATIONS:0 to 1 50 PSIG @
DEG. F
0) construction: 1" AND UNDER - SCREW ED; 1-1/2" AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S. A106 GR A OR B, WELD OR SMLS, SCH 80
0) FITTINGS 0)
0)
2" THRU 10" INCL 1.5
12" THRU 24" INCL 1.7
1" AND UNDER
2.16
1-1/2" SIZE
2.2
2" THRU 10" INCL . .2.1
12" THRU 24" INCL 2.3
C.S. A53 GR A OR B, WELD OR SMLS, SCH 40 C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL F.S. A105, SCR'D, 3000 LB. WOG
C.S. BUTT WELD, EX STRONG C.S. BUTT WELD, SCH 40 C.S. BUTT WELD, 0.375" WALL
UNIONS &
1" AND UNDER
3.4 F.S. A105 SCR'D UNION, 3000 LB. WOG
FLANGES
0) 0) 0)
1-1/2" SIZE
4.5
2" THRU 10" INCL 4.3
12" THRU 24" INCL 4.6
C.S., WELD NECK, EX STG, 150 LB. ANSI B16.5 RF C.S., WELD NECK SCH 40 150 LB. ANSI B16.5 RF C.S., WELD NECK 0.375"., 150 LB. ANSI B16.5 RF
SHUT-OFF 1" AND UNDER
V24B F.S. GATE VA FULL PORT O.S. & Y., SCR'D, 600 LB
(5.29)
1-1/2" THRU 24" INCL
V31B C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.32)
-
THROTTLE 1" AND UNDER L>D < 1-1/2" THRU 14"
INCL
CHECK
1" AND UNDER
1-1/2" THR 24" INCL
V112B F.S. GLOBE VA O.S. & Y., SCR'D 600 LB (6.31)
V79B x C.S. GLOBE VA O.S. & Y., FLG'D 150# RF (6.29) VT68 F.S. SWING CHK, SCR'D, 600 LB. (7.37)
V40 C.I. SWING CHK, FLG'D, 125 LB. (7.32)
JOINT MAT'L. FOR SCREWED JOINTS
GASKETS
0) nm ts
0)
20.5 19.20
21.3
JOHN CRANE PLASTIC LEAD #2 COMPRESSED ASBESTOS 1/16" THK GRAPHITE, - GARLOC*
900 ALLOY STEEL STUD BOLTS A193 GR B7, U/HEX NUTS A194 GR 2H
0) notes: 1- USE ITEM FLAT FACE FLANGES'AT~CAST IRON"VALVES AND EQUIPMENT. 2. USE ITEM 2.33 C.S. A106 SCU 80 NIPPLES AT INSTRUMENT CONNECTIONS.
| 8B 0012005 |
2778-P-l - Page 15
0 S13
Q.
Piping Materials
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO. REV.
PL-132 1
PRESSURE AND TEMPERATURE LIMITATIONS: 0 to 150pS|G(a ^nt0 DEG. F
0) CONSTRUCTION: 1" AND UNDER - SCREWE D;
ITEM
SIZE
ITEM
.1-1/2" AND OVER - WELDED AND FLANGED
DESCRIPTION
PIPE
1-1/2" AND UNDER 1.4 C.S., A106 GR A OR B, WELD OR SMLS, SCH 80
1) NOTE 2
0) FITTINGS 0) 0) 1) NOTE 2
0) UNIONS & 0) FLANGES 0) 0)
2" THRU 10" INCL 12" THRU 24" INCL 1" AND UNDER
1.5 1.7 2.16
1-1/2" SIZE
2" THRU 10" INCL 12" THRU 24" INCL
1" AND UNDER 1-1/2" SIZE 2" THRU 10" INCL 12"THRU 24" INCL
2.2 2.1 2.3
3.4 4.5 4.3 4.6
C.S., A53 GR A OR B, WELD OR SMLS, SCH 40
C.S., A53 GR A OR B, WELD OR SMLS, 0.375" WALL
F.S. A105, SCR`D, 3000 LB., WOG
C.S. BUTT WELD, EX STRONG C.S. BUTT WELD, SCH 40 C.S. BUTT WELD. 0.375" WALL F.S. A105 SCR'D UNION, 3000 LB. WOG C.S. WELD NECK EX STG, 150 LB. ANSI B16.5 RF C.S. WELD NECK SCH 40 150 LB. ANSI B16.5 RF C.S. , WELD NECK 0.375" 150 LB. ANSI B16.5 RF
0) SHUT-OFF 1" AND UNDER 0)
V350 D.I. PLUG VA. S.S. PLUG, SCR'D. 150 LB. (9.34)
0) 1-1/2" THRU 24" V339 D.I. PLUG VA, SS PLUG FLGD 150 LB. RF
0) INCL
(9.32)
0) cL>/U> THROTTLE 1" AND UNDER
0) <>
1-1/2" THRU 14" INCL
0) CHECK 1" AND UNDER
0) 1-1/2" THRU 16" 0) INCL
V112-B F.S. , GLOBE VA O.S. & Y., SCR'D "60CTTB": (6.31)
V79B C.S. GLOBE VA O.S. & Y., FLG'D 150# RF (6.29) VI68 F.S. SWING CHECK, SCR'D, 600 LB. (7.37)
V30 C.S. SWING CHECK, FLG'D, 150# RF (7.33)
JOINT MAT'L. FOR SCREWED JOINTS
20.1 TEFLON TAPE
GASKETS
0)
BOLTS
0)
19.20 COMPRESSED ASBESTOS 1/16" THK GRAPHITE - GARLOCK 900
21.3 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2H
NOTES:
1. USE ITEM 2.33 C.S. A106 SCH CO NIPPLES AT INSTRUMENT CONNECTIONS.
1) 2. FOR UNDERGROUND PIPE USE ITEM 1.33 PLASTIC COATED PIPE, AND WRAP 1) FITTING AND WELDED JOINTS WITH TAPE ITEM 20.10.
| BB 0012006 |
___
flWuBjam
' EsHeszs!
Dravo Corporation, Chemical Plants Division One Oliver Plaza, Pittsburgh, Pa, 152^2
Piping Materials
STANDARD SPECIFICATION NO. PL-139
REV.
0
PRESSURE AND TEMPERATURE LIMITATIONS^ to 1 50 psig @ onnt0 deg. f
CONSTRUCTION: 2" AND UNDER - SCREWED: 3" AND OVER - WELDED AND FLANGED
ITEM
SIZE
ITEM
DESCRIPTION
PIPE
2" AND UNDER
1 .2 GALV. C.S. A106 GR A OR B, WELD OR SMLS, SCH 80
FITTINGS
3" TO 10" INCL 12" TO 24" INCL 2" AND UNDER
1.5 1.7 2.11
C.S. A53 GR A OR B, WELD OR SMLS, SCH 40 C.S. A53 GR A OR B, WELD OR SMLS, 0.375" WALL F.S. A105 SCR'D, 2000 LB., WOG, GALV.
3" TO 10" INCL
12" TO 24" INCL
UNIONS & FLANGES
2" AND UNDER
0) 3" TO 10" 0) 12" TO 24" INCL
SHUT-OFF 2" AND UNDER
3" TO 24" INCL
THROTTLE 2" AND UNDER
in
U>J <> 3" TO 14" INCL
CHECK 2" AND UNDER
2.1 C.S. BUTT WELD, SCH 40
2.3 C.S. BUTT WELD, 0.375" WALL
3.5 GALV. F.S., A105 SCR'D UNION, 2000 LB., WOG
'
4. 3 C.S. WELD NECK SCH 40, 150 LB., ANSI B16.5 RF 4.6 C.S. WELD NECK 0.375", 150 LB., ANSI B16.5 RF
V24A F.S. GATE VA FULL PORT O.S. & Y., SCR'D 600 LB.
(5.23)
.
V31B C.S. GATE VA O.S. & Y., FLG'D 150# RF (5.32)
-
V112A F.S. GLOBE VA O.S. & Y., SCR'D, 600 LB. (6.30)
V79A C.S. GLOBE VM O.S. & Y., FLG'D 150# RF
(6.38)
--
V168 F.S. SWING CHECK SCR'D, 600 LB (7.37)
3" TO 24" INCL
V40 C.I. SWING CHECK FLG'D 125# FF (7.32)
JOINT MAT'L. FOR SCREWED JOINTS
20.5 JOHN CRANE PLASTIC LEAD #2
GASKETS
0)
19.2C COMPRESSED ASBESTOS 1/16" THK GRAPHITE GARLOCK 900
BOLTS
21.3 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS
0) A194 GR 2H
NOTES:
0) 1. USE ITEM FLAT FACE FLANGES AT CAST IRONvVALVES AND EQUIPMENT.
wm
O
s
ar %
i 7 BB 0012007 |
2778-P-l - Page 17
:
Piping Materials
Dravo Corporation, Chemical Plante Division One Oliver Plaza, Pittsburgh, Pa. 15222
STANDARD SPECIFICATION NO. REV.
PL-228 1
PRESSURE AND TEMPERATURE LIMITATIONS^ to 120psig 0 f 56 CONSTRUCTION: 2" AND OVER - FLANGED AND WELDED
DEG. F
ITEM PIPE
SIZE
2" THRU 10" INCL
ITEM
1.11
DESCRIPTION
C.S. A106 GR A OR B WELD OR SMLS, SCH 40, CEMENT LINED PER AWWA C-205
12" THRU 24" INCL 1.12 C.S. A53 GR A OR B WELD OR SMLS, 0.375" WALL, CEMENT LINED PER AWWA C-205
FITTINGS
2" THRU 10" INCL 2.18 C.S. BUTT WELD SCH 40, CEMENT LINED PER AWWA C-205
1) UNIONS & 1) FLANGES
12" THRU 24" INCL 2.19
2" THRU 10" INCL 4.3 12" THRU 24" INCL 4.6
C.S. BUTT WELD, 0.375" WALL, CEMENT LINED PER AWWA C-205
C.S. WN 150 LB. ANSI B16.5 RF C.S. WN 150 LB. ANSI B16.5 RF
SHUT-OFF 2" THRU 12" INCL VISA C.I. GATE VA IBBM O.S. & Y., 125# (5.27)
CU-<>>JOJ THROTTLE 2" THRU 16" INCL
V 237 C.I. GLOBE VA IBBM FLG'D 125# (6.34)
CHECK
2" THRU 24" INCL V40 C.I. SWING CHECK FLG'D 125# (7.32)
JOINT MAT'L.
GASKETS
0) 0) BOLTS
LINER SEALANT FOR
WELDED JOINTS
20.7
19.20
21.3
"X-PANDO" PIPE JOINT COMPOUND, SPECIAL #2
COMPRESSED ASBESTOS 1/16" THK GRAPHITE - GARLOCK
900 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS A194 GR 2H
N0TES: 1. USE ITEM ELAT FACE FLANGES AT CAST IRON VALVES AND EQUIPMENT. 0) 2. USE ITEM V2I0 (9.33) FOR INSTRUMENT VALVES I" AND SMALLER. 0) 3. USE ITEM 2.33 C.S. AT06 SCH 80 NIPPLES AT INSTRUMENT CONNECTIONS.
j_BB 0012008 1 2778-P-l - Page 18 0 a81
11
Dravo
Piping Materials
Dravo Corporation, Chemical Plants Division ] One Oliver Plaza. Plttsburah. Pa. 15222
STANDARD SPECIFICATION NO. PL-254
REV.
3
1
PRESSURE AND TEMPERATURE LIMITATIONS^ to 175psig
deg. f
: CONSTRUCTION: 2-1/2" AND UNDER - SCREWED; 3" AND OVER FLANGED AND WELDED
ITEM
3) PIPE
SIZE
ITEM
DESCRIPTION
2-1/2" AND UNDER 1.38 GALV C.S.A120, WELD OR SMLS, SCH. *0
3" THRU 12" INCL 1.5 C.S. A53 GR A OR B, WELD OR SMLS, SCH 40
3) FITTINGS
2-1/2" AND UNDER 2. 56 GALV. M.I. SCR'D, 150 LB.
I
3" THRU 10"
2.1 C.S. BUTT WELD, SCH 40
12" SIZE
2.3 C.S. BUTT WELD, 0.375" WALL
!
3) UNIONS &
1" AND UNDER
3.12 GALV. M.I. SCR'D UNION, 150 LB. SSR
!
o FLANGES
1-1/2" TO 2-1/2" 4.12 C.S., THREADED, 150 LB. ANSI B16.5 RF
i :
o0))
i
3" THRU 10" 12" SIZE
4.3 C.S., WELD NECK SCH 40 150 LB. ANSI B16.5 RF 4.6 C.S., WELD NECK 0.375" 150 LB. ANSI B16-5 RF
SHUT-OFF 2-1/2" AND UNDER V24
F.S. GATE O.S. & Y., SCR'D 600 LB.
(5.38)
3" AND OVER
V31A C.S. GATE O.S. & Y., FLG'D 150 LB. RF
NOTE 1
(5.31) V315 IRON BODY BUTTERFLY VA LUG TYPE 125 LB., WAFER (11.21) UL APP'D
THROTTLE
VALVES
CHECK
2-1/2" AND UNDER V-127 F.S. LIFT CHECK VA SCR'D 600 LB. (7.36)
3" AND OVER
V30 C.S. SWING CHECK VA FLG'D 150# RF (7.33)
JOINT MAT'L. FOR SCREWED JOINTS
GASKETS
0)
20.5 JOHN CRANE PLASTIC LEAD #2
19.20 COMPRESSED ASBESTOS 1/16" THK, GRAPHITE GARLOCK 900
0) BOLTS
21. 3 ALLOY STEEL STUD BOLTS A193 GR B7 W/HEX NUTS
0) A194 GR 2H
NOTES: 1 . USE ITEM V315 BUTTERFLY VALVE ONLY BY APPROVAL OF CHIEF PLANT ENGINEER
AND LOSS PREVENTION ENGINEER.
;
#
<T>
K
1 CL f'S
| BB 0012009 T 2778-P-l - Page 19
s
PPG Industries, Inc Industrial Chemical Division Lcke Charles, Louisiana
TITLE
r :\ np Chemicals o i rU^ o*
L -....`7
INDUSTRIES
PIPING MATERIALS
SPECIFICATION NO.
PL-U?
Apprvd. r r '
Dote
- , Poae 1 of '
A. SERVICE B. RATING
C. PIPE
VINYL CHLORIDE (Product, Product Rework, Quenched)
Press. Temp.
0 _20
t<? 150 psig to 350 F
1-1/2" & Under: Wld. or smls. steel, Sch. 80, ASTM A1 06, Grade A or B.
2" thru 10"
: Wld. or smls. steel, Sch. 40, ASTM A53, Grade A or B.
12" thru 24" : Wld. or smls. steel, .375" wall,ASTM A53, Grade A or B.
Over 24"
: Consult Engineering.
D, FITTINGS E. FLANGES F. UNIONS
SCREWED 1" & Under: 3000^ forged steel, screwed, ASTM A105, Grade 1 or II.
None.
1 " & Under: 3000^ forged steel, ground joint, screwed union with steel to steel faces, ASTM A1 05, Grade lor II.
WELDED/FLANGED
1-1/2" & Over: Seamless steel butt-welding, ASTM A234, Grade WPA or WPB, seme schedule as pipe. See PL-B-12.
1 50^ steel slip-on welding flange, raised face, ASTM A1 81, Grade 1 or II. Wld. neck figs, seme sch. as pipe are acceptable. Use flat face flange where required to mate valve or fitting.
1-1/2" & Over: Use flanges.
G. BOLTING
None.
H. THREAD DOPE Teflon tape.
1. GASKETS
None.
ASTM A193, Grade B7 bolt studs with ASTM A1 94, Grade 2H nuts. See PL-B-11, Item 2. 1 Up Inok wndiArc nt por pi -- P.-- 0 None.
1/16" Garlock 900 (graphited).
C
J. VALVES
^.1" & Under:
GATC J 'iiir-246f Do ~n ot US -O-
GLOBE
\J-31J 4, [/-
PLUG
BALL
V-156 r'onStr
LFT.CK. V-127
SWG.CK. V-168
,,
mu - y - $tf7~usc j'-'
f(i G<ob- r. .
/ 1 ' ,, ' ' \\
1-1/2" & Over: Ver3+B Do vjo'/' U5>2,
V-l 57; V-313 Cov Vw l'f
TV-80
BB_0012010_ \
' .0 / h
h' ' r' (
^
PPG Industries, Inc. Industrial Chemical Division Lake Charles, Louisiana
TITLE
Chemicals
INDUSTRIES
PIPING MATERIALS
SPECIFICATION NO,
Apprvd..
Date
Page.
PL-277 _ of__ I
A. SERVICE B. RATING
C. PIPE
WATER, 300# BOILER FEED
Press.0to
300 psig
Temp. -20
to 400
F
l^" and under: Wld. or smls. steel, Sch. 80, ASTM A106, Grade A or B
2" thru 8": Wld. or smls. steel, Sch. 40, ASTM A106, Grade A or B
Over 8'':
Consult Engineering
D. FITTINGS E. FLANGES
SCREWED
I " and Under: 3000# Forged Steel Screwed ASTM A105, Grade 1 or 11
None.
WELDED/FLANGED
1 and Over; Seamless steel butt welding, ASTM A234, Grade WPA or WPB, Same Schedule as Pipe .___________
300# Steel Weld Neck, Welding Flange, Raised Face, ASTM A181, Grade 1 or 11, Same Schedule as Pipe.
F. UNIONS
Use Flanges.
All Sizes: Use Flanges.
G. BOLTING
None.
H. THREAD DOPE Copaltite .
I. GASKETS
None.
J. VALVES Gate Globe Check
111 and Under: V-24A V-112A
ASTM A193, Grade B7 Stud Bolts with ASTM A194, Grade 2H Nuts. See PL--B--11, Item 3.
None.
300# Flexitallic Style CG or Johns-Manville Style No. 913.
li" and Under: V-25A V-74A V-78
| BB 0012011 |
Revised Date
PPG Industries, Inc. `Industrial Chemical Division Lake Charles, Louisiana
TITLE
Chemicals jL PL (P
INDUSTRIES
PIPING MATERIALS
SPECIFICATION NO.
PL-15
ADDrvd. G'/'/
Date .ij' v?* Paae 1 of 1
A. SERVICE B. RATING
C. PIPE
STEAM, 0-300#
Press. Temp.
0 -20
to 300 psig to 750 E
1-1/2" & Under Wld. or smls. steel, Sch . 80, ASTM Al 06, Grade A or B.
2" thru 10"
Wld. or smls. steel, Sch . 40, ASTM A53, Grade A or B.
Over 1 0"
Cor suit Engineering.
D. FITTINGS E. FLANGES
SCREWED
3/4" & Under: 3000^ forged steel screwed, ASTM Al 05, Grade 1 or II.
None.
V
F. UNIONS
G. BOLTING
3/4" & Under: 3000^ forged steel, ground joint, screwed union with steel to steel faces, ASTM Al 05, Grade lor II.
None.
H. THREAD DOPE Copal tite.
1. GASKETS ,~v
None.
S' . J. <S) JJ
T4T>7 4 4>> cr >
K.
VALVES GATE GLOBE PLUG BALL LFT.CK. SWG.CK
STEAM TRAPS
3/4" & Under: V-24A, V-130, V-266 V-112A, V-270, V-310
V-127
See PL-B-13.
WELDED/FLANGED
1." & Over: Seamless steel butt-welding, ASTM A234, Grade WPA or WPB, same schedule as pipe. See PL-B-12.
300^ steel slip-on wld. fig., raised face, ASTM Al 81, Grade 1 or II. Wld. neck figs, same sch. as pipe are acceptable.
1 " & Over: Use flanges.
ASTM Al93, Grade B7 bolt studs with ASTM A194, Grade 2H nuts. See PL-B-11, Item 3.
None.
300"* Flexatallic Style CG Asbestos and 304SS with CS Centering Ring.
1" & Over; V-25A V-74A, V-132
V-83
_________ 00 12(M2~7
PPG Industries, Inc. Industrial Chemical Division - Lake Charles, Louisiana
TITLE
"Jik
INDUSTRIES
PIPING MATERIALS
SPECIFICATION NO.
Aoorvd.<&XJ!r>
PL-42
Date.
Paae 1 of 1
A. SERVICE B. RATING
, C. PIPE
METHANE (Natural Gas)
Press.
0
Temp. -20
to 150 psl 9 to 350 F
1-1/2" & Under: Wld. or smls. steel, Sch. 80, ASTM A1 06, Grade A or B.
2" thru 10"
: Wld. or smls. steel, Sch. 40, ASTM A53, Grade A or B.
12" thru 24" : Wlc'. or smls. steel, .375" wal 1, ASTM A53, Grade A or B.
Over 24"
: Co isult Engineering.
D. FITTINGS E. FLANGES
SCREWED 1 " & Under: 3000^ forged steel, screwed, A5TM A105, Grade 1 or II.
None.
F. UNIONS
5 =0 ' G. BOLTING
k)
1" & Under: 3000^ forged steel, ground joint, screwed union with steel to steel faces, ASTM A105, Grade 1 or II.
None.
3 H. THREAD DOPE J. C. Plastic Lead ^2.
1. GASKETS
None.
J. VALVES
1" & Under:
GATE
V-24B
GLOBE V-l12B
PLUG
BALL
V-275
LFT.CK. V-l 27
SWG.CK V-l 68
WELDED/FLANGED
1-1/2" & Over: Seamless steel butt-welding, ASTM A234, Grade WPA or WPB, same schedule as pipe. See PL-B-12.
1 50^ steel slip-on welding flange, raised face, ASTM Al 81, Grade 1 or II. Wld. neck figs, same sch. as pipe are acceptable. Use flat face fig. where required to mate valve or fitting.
1-1/2" & Over: Use flanges.
ASTM Al 93, Grade B7 bol t studs with ASTM Al94, Grade 2H nuts. See PL-B-11, Item 2.
Use lock washers as per PL-B-9. None.
1/16" Garlock 900 graphited or equal. Use full face gasket for flat face flanges.
1-1/2" & Over: V^31B
V-79B
V-l 57
V-80
|
| BB 00*12 0*13~7
PPG Industries, Inc Industrial Chemical Division "Lcke Charles, Louisiana
c title
$3 n'P*
CiiGmicels ^ ^ {?
r.OuSWES PIPING MATERIALS
SPECIFICATION NO.
PL-4;
Appryd.-'1 d '
Date
Page 1 of 1
A. SERVICE B. RATING
C. PIPE
WATER, 400# BOILER FEED
Press. Temp.
0 ~20
to 600 psig to 400 F
6" & Under; Wld. or smls. steel, Sch. 80, ASTM A106, Grade A or B. Over 6" ; Consult Engineering.
(
D. FITTINGS E. FLANGES
SCREWED 1 " & Under; 3000^ forged steel screwed, ASTM Al 05, Grade 1 or II.
None.
F. UNIONS G. BOLTING
1" & Under; 3000-^ forged steel, ground joint, screwed union with steel to steel faces, ASTM Al05, Grade 1 or II.
None.
H. THREAD DOPE Copal ti te.
1. GASKETS
None.
J. VALVES
1" & Under;
GATE
V-24A
GLOBE V-l12A
PLUG
BALL
( CHECK
o|
WELDED/FLANGED 1 -I/2" & Over; Seamless steel butt-welding, ASTM A234, Grade WPA or WPS', seme schedule as pipe. 600^ steel weld-neck welding flange, raised face, ASTMA105, Grade 1 or l|.
1-1/2" & Over; Use fianges.
ASTM Al93, Grade B7 bolt studs with ASTM Al94, Grade 2H nuts. See PL--B--11, Item 2.
None. 600^ Johns-Manvllle Style No. 913 or Flexitallic Style CG.
1-1/2" & Over (flgc!.& butt-wldg.) V-45A, V-108A V-72A, V-109A
V-l 14, V-l 15
l_BB 00120? 4"
ro-ro
