Document YGXx26JyJNXD4y244QVp9jLoV

CONTRACT NUMBER C-FF~21-If-2l4 STANDARD OIL COMPANY OF TEXAS JacXDapaiatiOT, COMPANY, and the undersigned CONTRACTOR, hereby mutually agree on May 15, 1961 , that CONTRACTOR shall perform for COMPANY, at 3SQSH3r County of El Paso Company13 El- Paso Refinery State of Texas PLAINTIFFS EXHIBIT the work set forth in Specification No. EP-15^--N and entitled Insulation of Heptane Facilities , dated May 15, 19^1 CHV-34_____ as an improvement to real property leased or owned by COMPANY by affixing thereto whatever materials are involved therein so as to become an integral part of such real property, under the Terms and Conditions, pages 2 and 3 hereof, and in accordance with the above Specification, which Terms and Conditions and Speci fication, attached hereto, are part of this agreement COMPANY shall pay CONTRACTOR in accordance with statements prepared by contractor monthly a compensation of the amount set forth in attached specification EP-15^~N. The work shall be commenced on or about June 12, 196l diligently prosecuted, and completed July 17, 19^1. A payment and performance bond in terms and executed by a surety company satisfactory to COMPANY shall be furnished to COMPANY in the sum of (No bond required unless an amount is entered above.) COMPANY STANDARD OIL COMPANY OF TEXAS By-----------------------------------------------------------------------------And____________________________________________________ Witness CONTRACTOR?lMot1) SELLE, INC. By-------------------------------------------------------------- And. Contractor's Address. Contractor's State License Number _ (Contractor is required to be licensed in New Mexico) Communications to COMPANY/SoukFbe ^ire^tecPto dm atten tion of J, E. 33imler, P. 0. Box 862 at El Paso, Texas. Communications pertaining to actual, construction and installation shall he by an authorized officer of the corporation and corporate seal af fixed and attested to by the Secretary. If CONTRACTOR is not incorporated, signatures should be witnessed by an employee of COMPANY, if practicable; if not, by a disinterested party. GO-279--TX (9-60) m > VvOo VO wo X o o u _ TERMS AND CONDITIONS 1. PERFORMANCE OF THE WORK 1.1 Independent Contractor: CONTRACTOR shall be an independent contractor, aaintaining complete control over CONTRACTOR'S men and operations. 1.2 Specifications and Standards: CONTRACTOR shall perform the oork in accordance with (a) the specifications and exhibits (if any) attached hereto and such additional drawings and explana tions as COMPANY shall furnish to CONTRACTOR to detail and illustrate the work to be done, and (b) the standards prescribed by law or by any body having the right to prescribe minimus standards. 1.3 Permits: Unless otherwise provided herein, CONTRACTOR shall, at CONTRACTOR'S sole cost and expense, secure all necessary permits, make all cash or other ,deposits, furnish all bonds and give all notices required by lav. 1.4 Materials, Equipment, Labor: Unless otherwise provided herein, CONTRACTOR shall furnish all material, utilities, supplies, tools, and equip ment and perform all labor, 1.5 Safety Measures: CONTRACTOR shall take all reasonable precautions to protect the work, workmen and the public; and shall provide, where reasonably necessary, barriers, guards, temporary bridges, lights, and watchmen. Where work is done on COMPANY' S premises all of COM PANY'S safety rules shall be strictly observed and smoking shall be limited to such locations and occasions as are specifically authorized by COMPANY. CONTRACTOR shall not without prior writ ten consent of COMPANY perform or permit any work hereunder or in connection with this agreement while on the premises of COMPANY which involves a fire or explosion hazard, including welding, torch cutting and disposal of debris by burning. 1.6 Petroleum Products: CONTRACTOR shall use only such petroleum products as are manufactured or marketed by COMPANY or its designated corporate affiliates, in performing the work and in the operation of vehicles and other equipment oper ated by CONTRACTOR or his subcontractors in con- - nection with the work. 1.7 Suppliers 1.71 COMPANY may nominate bidders for the supply of certain items of material required for the work hereunder; CONTRACTOR shall request bids on these items from the nomin ees, and may obtain such other bids as CON TRACTOR may elect. 1.72 CONTRACTOR shall purchase material offered by COMPANY or its designated corporate affiliates as bidders nominated under 1.71 above insofar as such material is suitable for the work and is competitively priced. Other material, except petroleum products referred to in Paragraph 1.6 hereof, may be purchased from whatever source CONTRAC TOR may elect. 1.73 Upon completion of the work, CONTRACTOR shall Inform COMPANY as to the approximate dollar amount (within 10% more or less) purchased from each bidder recommended by COMPANY. 1.74 CONTRACTOR shall, if so requested by COMPANY, identify COMPANY, in a form approved by COMPANY, on all requests for quotations and purchase orders used for the procurement of material to be incor porated into the work hereunder. However, unless otherwise provided herein, CONTRAC TOR shall assume full responsibility for ordering, expediting, receiving, and safeguarding (subject to the provisions of Section 5.3 hereof) all such material, and for conducting all negotiations with the vendors thereof including paying for material and enforcing of warranties. 1.8 Labor 1.81 CONTRACTOR shall employ labor from that available in the vicinity of the work, and in accordance with the terms of employment prevailing in that vicinity to the extent that it is practicable and consistent with the timely and efficient prosecution of the work hereunder. 1.82 CONTRACTOR shall use all reasonable efforts to avoid any disturbances in the existing labor situation which will adversely affect the business of the COMPANY or other contractors working in the area. 1.9 Carriers: In connection with transportation of purchased material and equipment. CONTRACTOR shall give consideration to, but shall not be limited to, use of carriers recommended by COMPANY. 2. COMPENSATION 2.1 Extra Work: COMPANY may make alterations in the work to be performed hereunder by adding to, omitting or deviating from the specifications; COMPANY and CONTRACTOR shall appraise such alterations and alter the above compensation accordingly. CONTRACTOR shall be entitled to payment for extra work performed only if such work shall have been previously authorized in writing by COMPANY. 2.2 Taxes: The compensation provided herein includes and CONTRACTOR shall pay all State and Federal payroll taxes, including contributions or taxes assessed against employees on wages earned, in connection with the work. CONTRACTOR agrees to indemnify COMPANY for all liability in connec tion therewith and to make all reports required thereunder. The compensation also includes an amount on account of all other taxes now or hereafter imposed by any governmental-authority upon, measured by or incident to, the performance of this contract or the purchase, storage, use or consumption by the CONTRACTOR of material used in the performance of this contract', unless the applicable laws specifically pro vide that such tax be paid by COMPANY. 2.3 Acceptance of Work: Where provision is made by law for recording Notice of Completion, COMPANY may indicate its acceptance by recording such Notice; otherwise acceptance shall be on the date the work is completed to COMPANY'S satisfaction. No payment hereunder shall constitute an acceptance of defective work or improper materials. 2.4 Terms of Payment: 2.41 At the end of each calendar month during the progress of the work, and upon comple tion of the entire work, CONTRACTOR shall be entitled to receive eighty-five per cent (85%) of the compensation provided herein for the work performed during that month. The balance shall be payable 35 days after Acceptance, provided there are no undischarged or unsecured liens, attachments, or claims in connection with the work. COMPANY may require, as a condi tion prerequisite to payment, that CONTRACTOR submit evidence, by receipted bills or otherwise, that all costs incurred for the work have been paid. 2.42 When payments are due as provided above, COMPANY or CONTRACTOR (as specified on the' first page hereof), shall prepare statements of amounts payable. Such statements shall show the total compensa tion for the work performed to date on the basis of the contract price and further itemized and in such form as COMPANY and CONTRACTOR may have agreed, less 15% (except in the statement of balance payable 35 days after Acceptance), and less any previous payments. COMPANY shall pay CONTRACTOR the amount so payable, subject to COMPANY'S audit of the statement, by check mailed within 10 days after the date payable or, when statement prepared by CONTRACTOR is received after the date payable, within 10 days of receiving CONTRACTOR'S statement. g ^ ^ PRINTED IN U.S.A 2 GO-279-GEN OR GO-279-WOI (CD.6-60) U 0000667 Specification Ifo. BP-15VS Hay 15, 1901 PO&O 1 Of if lasMcm ,y,im lamma 1.0 gcggjg fisit specification covers the re^ptiresatat* for furoifthiss all labor, eqaijsseat and saterials (except aa noted herein) for installing insulation and veather- proofing oa vessels, best exchanger* M lines la the jfoptese Facilities at the Standard Oil Coepany of Terns Sefiaery la SI &t*o, Texas, Ha folloviiig draw ings and general specification ore & port of this specificatloBj 3bexz&l Insulation for JSsfc I4aes sad Vwb&cIs Sosstvxy of Insulation for Sot Vessels oaoary of Insulation far Sot Use* Standard Insulation for Sot Piping Standard IsasalaticR for Sot Vessels %ee. S3-13&-C FB-21-10577-0 151-23.-18578-0 04*855733-0 8^S997S5-3 *Sdo opacification will govern where it differs from general srpecAfieatiea ES-13&L-C and the attached dmwtage. 2.0 g&Eg 2.1 i&2&SS 2*11 Piping shall be insulated and weatherproofed is occordaacs with Drawing PB-21*16978, ouasaiy of insulation for hot piping. Veatherceat per Schedule A of Drawing G&B99733*Q, BCcuri3 with lh go. copper wire* BO 33? use A|g&S veatherccat specified in Drawing FB-21-18978. 2.12 Insulated lines 1-1/2 is. and larger resting cc. stanchion* or sleepers will he supported os "l* sections (installed by others), as shown in Detail Drawing GA~S*99783. Hoes 1-in. and saaller will rest directly on aupports. 2.13 Valwea and flange* on insulated hot lines are not insulated except where installed in stem or electrically traced lines. 2.2 Itoaiaseat 2.21 Vessels and exchanger* shell be insulated and weatherproofed as specified oaj Drawing PE*21*l8977, suesary of Insulation far hot vessels. 2.22 Aluwlnuaj weathereoating os described in Bote 7 of Braving 0A-B-99T85 is req*4yfli for colwomi and vessels. CHEV BB >000669 ) 1* J S#tsifikttc>a Jfc. 15* a$& fttfi* 2 Of k 2.153 liteproofias oa the skirt* or eolusss C-2101 oast C-2102* *6 shows la BetsiX *#* Jhsawiss 0A-fl-S>*i785, will be deaiit by other*. 2.iJb Calami C-2101 and. C-32102 are to be insulated Attar they are erete&* smm&jgjssg 3*1 Work stall be prosecuted la accordance with SCR&HIX%8 construction eehedala vfcdch shall be agreed upas vith CO^PAIQ'S eeaetraeticsi reprecantativc prior to cB&ae&eeaefit of work. It is aaticipated that the work should start approximately Jane 12, 19S1* and be eosspLoted by duly 15# XSWal* 3-2 Contractor shell eoasaet his verk la cueh. a canner that vill aisialsw isterfereads vith other work ia progress at the job site* jparticalarly with respect to the m* of work areas and jcb acfaedalicg. 4.0 4*01 CC&5*A3T elll furnish at job site fresh wter* air and electricity aa repaired* 4.02 CG&ORtKZ vill provide extractor with necessary vorkiag spas. at job site and a eiorags area within & reasonable distance froo job site fear materialc, supplies, tools and e^iipjseat, but vill not furnish saccs for protecting these fro* thsr eleseats. 4*03 CGKPftSf will furnish all staging for irasalatioa of weeels and lines. Contractor say use each staging at hie risk. Should suitable staging not be available to contractor when re$xirfe&* vrlttea agree&ft&t shall be reached la the field os the extra dee coatfactor for faralihisg Ms cw staging. Work stall not proceed until this extra weak has bees authorised. 5-o magms-mjem. xlSIifis mjsLmmsm 3*01 Contractor shall provide all labor, tools* special eqplpsent and saterlale for complete insal&tios job is every detail except those listed is Beetioa 4.0 os being famished by CoKpany. 5-02 All flashing, anchorages* clips, sapxjrt#, eagles or reinforcements retired for complete application of insulation shall be funs!shod by contractor* except os acted is 4.0 abate. 5-03 Ceatraotor stall receive all iaeolaticn* debrie* tools* eeuipseat sod excess material lsssediately oa cocpletioo of the job. CHEV BB 0000670 Specification So* SP-154-B 8e<y 15, 19&X fctgs 3 cfb 5.0 atsrjnca CP TIB JOB 5,01 Work shall he perforssed in accordance vitb OOJfltfciEf* tins schedule, as stated generally tn this specification and as specifically stated lj COKSftSI'S r<tjtreatentative * <5.02 So substitution of materials specified herein vill be permitted 'oatlcsn specifically appro?*! in 'writing by COMHiSf, Substitution* Sjacpcscd by Contractor aaat. In his view, provide overall <jwality fef'too Job equal to er better than that provided by specified settertals* 7.0 scsssma or comuss *f ,01 Cejatractor util be eoaptmsated for insulation aaft ucathrpscofiisg in accordance vith tha following schedule: Vessels sad ^efcsaseera C-210X c-aice E-2023 2-2102? 2-2101 E105 PiOSEfr 3/V V 1-1/3" 2 3" 4" 6`` | 2,159^0 lus2p 8053 l,lQ.0Q 755,00 I ** a* 175.00 '* * 146,00 lsl.00 ' i 0.89 pan r Xinsar foc ot *93 1.05 1.10 1.26 * ** a ** ** t* tt >n 1.V7 b' * 1.83 * V* M 7,011 Ccrspsasatloa for insulation and weatherproofing f valves and fittings shall be sade on the basis of the following multipli cation factors for one linear foot of eats* aisc pip* Insulation as Quoted wedar paragraph 7*01. Multiglicatica Factor Itea Screwed Bends, SlSbows ~ 1.0 Placed ?T.O~ Bcsarks Cbsu^c""iG dir*ction,"itis"a than 45 degrees to be con sidered as straight pips. Branch Connections (Set coasted for fitting eo^maation js*r Section 11.0215 of Spec. KG-1381-C) CHEV BB 0000671 Speelfleatioa So. EP-iSH-Ji my 1% 1961 F&gt k of k Itea Caps or Clonm domed ?l*agil figSX** f- - --------1*6 m Cronos Tlsages (Fair Sadocors 1.5 12.0 o 3.0 1.0 5*o fined o sics of large end. Strainer* I 1.5 7.0 1.5 7*0 Based 00 branch Use sin. Valves (vita pnsstce seal, ocrd. or aaioo bossaet) 1.5 6,0 Valves (vita bolted booaet) 3.5 a.o Include* bceset flange iriaulatioo. 7,012 So allasaooe will be m& for intsrforeacs at clas$, bxatcieto, anehCCT^ sboas, eie. CHEV BB 0000672 Specification No. EG-ljBl-C Engineering Department November 10, 1958 Page 1 of 7 SPECIFICATION EG-1381-C unMu-.sqo f?r.a ':s2i*fii)x.u .i.r ms ; x-'c alsscev LkoIvzsV win :obh -MTHBRMAI? INSULATION' FOIM{OT^INBS'AND 'VESSELS' .wolsd C. A siqn,i33,seq .ix ;uioi as >;-i ixirta airscr&u .'c:'iIunMd no. ni_ J1-..Qi-SCOPE Hooqa noqy '; Mdeailqqtf cisco Teiitsov; ssejtv.K Lk '-`.0. r ** :3inE..fu1osiia eji bna rrinoo MI This specification covers the requirements for the insulation for the ..facilitieSuas:. described iia1.the.attached.1 list -sheets .and .drawings. : v;a ,l>upp bsvoiqqa to e i shlMD .toxnad roqsv - ..-riv /iMf/I K-,ko =-,ari:Ia-.pas.es;pfj:confliction between i3iis. specification and the list sheets, 3 a sir;lithe -list.': sheets shall^govern.i .This.' specification shall control if there Inizo- risi variancer.between;41 .andeEFr. Forms 429' and' 492and Drawings GA-N-99783 . and.GArJJ"9978^*st lira..; ..... - - .3>?-.;-oc. IMe-rr ieen'a naintnyM %>Q;} HOT rPIPING; INSULATION.1. noiiscf 'isxvjssrf 10 S3cr,-dl 3; . .2 iOl:Piping^shalTi be: insulated as`.per: COMPANY' Form EF-492 and Drawing GA-N-99783. Thickness of insulation called for does not include :iI27nM-ecrIo'!vreather>^coat-ingv-.r.\ ..ecreote Tnemoo aoiasdeA 30.f .vclori 0.4 rfq.c'igs'io'l. toct or Mtlq-qc vlL'p3 bsvoTqqn 10 2.02 Emulsion-type weather coating shall not be applied when atmospheric zLurss's :'conditions are.:such:'that' the.'''finished'-sui,face 'may. ,be wetted to riio?iusnIwiiihin!2;4lhovd^'"^r6Miith^>tixBe3:6f^applicatidh. -CsriT .cSt^-vl-AC lutiwaiG WJ r-s LMIqqA .Isyne Mvc-qua . Ii:v co-n2J.03->I,TracedAlines:ishalli be'insulated-by-orfe'iof' the below outlined . loiJ-alijasxinfethbdsio .-28-gage? sheet metall-'trace'ii shields shall be installed -T3 r,r:oii.ibi:o.by:i theiCONTRACTQR; as'shown-oh Detall-D, Drawing GA-N-99783 in all ziocl t`1' Mrfiiv 'cases; -'Bidder^shall;indicate;hi#proposed--method of insulating in his bid. . 'lo anil f.iii iO IJ3MJ J * Q . / 1, 1 . .4! .r? -2.031^OVe'bsized?rigid pipe-'-coverihg,ivc&lcilmi''silicate;of an approved make. Covering sections' 'shall''all'f be of the same ID with the legs trimmed to bring the maximum ` clearance - between the't'ra6er-pipe combination and insulation I'tot-within' less- thari- l/4i in.'- .' Deviati'Orfs- from this technique must be approved in writing by COMPANY'S Representative. ' Materials ?-and insulating?techniques* 'used1 'shall'' be as shbvtron Drawing- GA-N-99783." . j rru .V'LViiiOG x1' i.rvrrqjr v+ilziKss eo:p> MciIn ;.i 2.032 The use of preformed "Defendex" or asbestos sponge felt or equal is acceptable. i. jiiil " *:' . .1.1/ 2;04]<''Insulation?shallbe-tied:.with:galvanized- Vire -as-' Specified on r> i'it.? > Drawing GA-N-99783.?'^ isnyxlr. Isup-.- to T-: h5C?nIq oof Ll.rdz niirfoelG . -vJ/niuLv. >1 :.ic v.q Tj' 7.-' ^ 3u2J05 IWeather-'-coatingi-shallobeT installed ahd.< secured, with copper -rtfs hiclo.lllwirelor stainless-fcteel..'bandsr as; specified in Weather Coating Men ot e-qi/.: ScheduleeA on*Drawing!GA-N-99783.t w ' 3..0...,VESSELS, CD^UMNS,- HEAT-EXCHANGERS.:. , 0- , 3.01 Blqck insulation shall be applied In accordance with COMPANY .i0 {* po'nnS -EF\429-fandiDr-a^frig GA-N-99785' attached; : Thickness of Tninsulatidn-*Cal'ledHor does ;not-include.Weatherproofing. . .noL osW j-ii.iv; n -Inurro el linns I 1 11 a 5 vflO0673 Specification EG-138l_C Engineering Department Kuve-.iber 10,' I95C Page 4 of 7 i'Lj : l *.;? i ;i * 4.C)4; ^'Mv^i^ura Wd}terfeatin^'0;.3^>inV or O,024*in'.r thick with vapor 'uk$'bn 'sj^ci&b approval; in'the1 inquiry or purchase 7 ordisr,,''^ proposed method of in- ^tdliing anS'securibg aiu^num wehthercoat-fbr approval by COMPANY. ;ji^0'5,.yl^Tu^i^''fcjiall^b'e fitted'^ound nozzle's;'inanways and other > !'V!///apsurtenanq^8fsp";ai'/to'`allow r8om for:8dit removal around all ' fladgis'. These; appurtenances!phallunot lSe` `insulated.. Insulation afbuhd sidnways, noztlOb and other apptirtbnancea"shall be completely sealed with .weatherproof material to prevent leakage into the "*;i ' ihsulatiob. 'Ihsfoatiorr arSunci' structural memB^rs,vsupporting stairs, i ! etc; shail'be'S.r;u` itably ireatherprbho.fh-deura^injLd: '^flas.Uhe.vdifvo * : ^uTtaflit'^etaiis qfvhis. propdsed1 Construction with `;Ms"quotation ..showi|g^size'S5hd' spacihg^pf banda/-'t'ype of insu- lation' and weath'erprq^ing^t^.used, spacing-b':Nelson studs, .'detail's. 6f e^ansiqb-'jjbiftts; deta^s' of;.weatherprdofing around `tank dqbhections; ^Hltails^ of 'roof`''flasltang^;:and`:rqof .insulation. . ".soft 'toett^xpdfetinS d&taiib. *' : ( Vi.-:". . ulm.'r ; -..'v ' " ' '' 'v ' 'Wherb^weather -coating'^i's`;to:be'painted; asbestbi'-!Cement sheets, .. if usedj'shall be'''steam-'.ctired''to:'rejndve'free alkali and shall be' v; r i'i-'.' - pfioe^-'on 8hck-and'-'edges1 with d' vinyl-sealer;of^Amercoat 33 prior to application over the insulation.''' : ''!S0';'0 g'.~0^^MlSCEDLANfiOUS EQUiRiENT^ ^" Pumps,'turbines, dnd other miscellaneous equipment''sHalS be insulated with block insulation or a combination of block and plastic insulation. "Block"insolation materiai-'seiecti6fn and 'application for-_'misc'eilaneous Jequipment shall be inuaccordance;' with Brewin'. GA*N-SJ^7ff. "Block insulation shall'be used on' all large fiat or Curved surfaces and ,franir: other surface which''does hot1 necessitate coraplicat'id fitting of "blocksy' Care;'shall !.be taken5to leave access to ptimp and turbine glands atid'dther-:poihts requlring-peribdici maintenance; ' ( -J'5v6lv' Johns-'Manville'7^456 "or 'aquai 'plastic 'insulation' shall be used on e *.- ; 'injr^Sdr^acb which`ii riot suited to bldck'insulation but its use shall'be kept' to' a minimum. '' Insulation shall be'applied on clean 'surface to re'cdmraendM' fcba-t? thicknesses. ''If ,dt second layer is required, plbstic'^nflulatibb;' be' '?iicnfed'! 'tibJfWfc and 1" x 20-ga. ' galvanized hexagonal"'me:sh' applied1 over' the 'entire plastic insu- r latio'n swface'witH feutt'ed joints''laced together .i^Lth #18 gage galvanized iron wire and secured to the insulation with l-l/2-in. copper vine staples, placed to hold mesh snugly .against the ^firis'ilfljaticbr' 'The inslCLationV^wben1 dry,. obeli'be. covered with veathercoatihg S'iini'i'ar to that jibed dyef. vessel^'ahd exchangers ^ haHn'g''the'''same':t'5^e bf: insUlatiph^ - ' y^'J'y.'i J `*V* / l* CHEV BB 0000675 -"E i'a.c J-.-rji'i.t o.;.r'r. tf.satFtxquG gciizvcZsiil .. , w c uy.i Specification EG-I38I-C J^ineerip^Departmenfe: Ncveiuer 10, 195 Page.5~.0f.. 7 6.0 MATERIALS AMD FACILITIES FURNISHED BY COMPANY HHT 10 IIOITUDSYS 0.6 ,, l. ' ' ' ' -i ii - --jin "** uUiLesba -661013' CGMEANI mill furniBk-nearLthe^obrsi.ted'aljLcidf #ha?follpWing -zAtrm ad * ^materialBfcrequired^fprr.theo.specifiedj-vtofrketedsda a* ~uoo sdd-'io J-tsq a ah is.rnriroo Isdi HSIOAHTKOO -Cf Seeds a.*i eiioL s*i Java tf*:oitbadl4lQ9v ~ i-taykoldaWeather `Cloatotdnu-Td;: .zty'zjyto gabfcow *f,u?o to eiiiaii^c r-rw aldal.c^v* bojilrtieq ad CONTRACTOR! shalltadvisel.CQMPANY 'of -tte^330J&fctj!iiep5oi&JAfese materials vi XtsoZzl-jnaz s. r.equii,edice';Tbi'si adviser shallT.be/:giVenj.'SUfficiently ia advance to v/J i:?;e^qparadtobMbtl3tIprocuS!emSiit`. r-nirrt-r*. ci Sjvc'xqqs do;, t-di rol v-fll.as:p hlc-j^vo siihrc-c.i .w-slrr alii n. . iae^i HOTOAfi.IHOl ` `. hhi.ai'6\Q&-x -CCMPANYi.vill .furnishrat;,jOb::site.ufr.esh water,r,&iR, and electricity as stated in the contract or purchase order. SHTHAHAUi) QUA Q>* 6.03 COMPANY will furnish expansion joint ribs, stiffening rings, and .'tTtyEskirtlangleniclipsxoai vesselsyend colUiana> a-row 1IA IO.Q J *033.6.Ok ICOMPANY*wiHlinstall?steamr.trafflejsLbufe wtiaG^&!CinstpJa> sheet idAlMOO son^.^metal JbreaduMntoi'f'oii":shieldfc.aibund^jtraceKS'f (c.) :..i sub 'a-iosleb IIs eeur-qxs ave is 'sisqo'f Unite EG'TCAHTHGO e-7iri.ll 3:6i05'iOiPANYiM'U7pi'ci3d.de:>.G.0NEMeT0R;^ttejific^.S8ai3z0wrking space at job site and a storage area withinnuhseasqnabl.e 'distance from job site for materials, supplies, tools and equipment, but will npt furnish, means for proteefjhgJ'jfcheseirfrOmi-theZ/el^ents. o .COMPANY will provide right of way making these areas accessible" to -soini equipmbHt^no^onsiaKbo-. oi sotfl iO.01 jjcjJ:iaebne^iiiiquB noxiou .'ixnoG 31 HHQAtiDHUH -i-jesT aoii'era < JC`C!?.i;-.6.06'SCOMPAMvwiH7furnish".stagi-ng .fortinsT&afcipa-iOfitpiping. CONTRACTOR .co-;i-may:USBvsucb:stagingr:at;.CGNTRACTORVS!EisJcf(r:Should suitable staging . n.t tmi f notebe^available Ffco'CONTRACTOR1- when:-required,Jwritten agreement i*ifcr. 4-. sball':be<reached: inHAheicfiald *on %he/:ext'fh'Aiuei(CONTRACTOR for furnishing his own staging. Work shall?;note.proceed until this extra work has been properly authorized. aBSWYAL 10 'iLrrqggOS 0;.Z? 7.0 MATERIALS AND WORK FURNISHED BY CONTRACTOR".................. dij5 ,aiggaatots ls;inaj' taiesai>v do noik.-lua;;! mi -ixmcvs'I 10,:1.C bii.7.01 : CONTRACTOR; shalli provO/de' alib;'labar> ftoolsy .'special ' equipment . 7?fOifXJ 'and;.matnrialb-.;foK!iS/cbiEipl'etei insulation job innevery detail, except those listed in Section 6-0 as being furnished by COMPANY. lo ntese ool iooi toe ocirq tinu .3 sJo.jp .rim's JjOTDAHT'aOC '10. II '^.02K:.Ml;flashingr;.an'chofsgeavi',.clipsr, rsupporfs:, ir^ti^ies or reinforcements .<.0 "ic ec.liq 5:required^fdr-:cdnplete'i.'appllicationi-J5f.'.<dnsiilaticta)Jshall be furnished srit oe:Wi.-hnd:a.nstaHedicby^^cCONTRACTOR^ exdep'&.^asii:ncited-.d;i6.0 above. gczs'j bee-ir..? s-jaiJvMl zuotsov edi io'2 a-zaJosh xolsc ?kql jis;-:i 7*03 CONTRACTC will furnish all staging r.e'quiredf.fos. tanks, and vessels. Staging must meet local requirements for safety. Staging I.1- -' l.-kv; -- L l.-.'.i' for leaclf. piece; of.iiequipnieiht.' sh^3.!.:be.'.quotedI'i;Separately and shall vd Ai-,T.vbe.:deductibl^ fromathe';contrac.ixf.pfice:.when CONTRACTOR is able to L saccconq 3 MBiiTJCaffiAHY ? 8f'.tagingcn :;r ;.u; SOTO/yTPtO'j id Xlsria ^r.iqlq IIo 1o cii-JTjrieJ , `RIA'ii'iOO \\(i f-uitionen ~3iqs'7 `Pi :;-.CONTRACTORi-Bhall. remove fall!rinsulatIon',;'-debris, tools, equipment YKAIMGO .'s-=.U:apd'`djfcessi'material'Immediht'elyiton.completion of the job. ; .+:T3ao'fq f.-vrv'juthic-as'.'rqei !' s-rai c-J idrln 3d7 wviuw -i.a ----------o - cr/*`iv'v . jrm'vsn i--------- ------- :hevbb )000677 6190000 aa A3HD Specification IG-I38I-Q Engineering Department November 10, 1958 Page 7 of 7 11.0211 Insulated straight-piping shall be measured as such, from end to end of insulation. 11.0212 Where uninsulated fittings such as valves, flanges, etc., occur in the straight run of piping, they shall be excluded from measurement. 11.0213 Where a miter occurs in the piping, the straight, run of piping shall be measured on the center of the miter along the axis of the pipe. 11.0214 Where a bend or welding elbow occurs in the piping, the run of piping shall be measured through the' bend on the centerline of the pipe, including, the actual length of the bend along the centerline as part of the run.' 11.0215 Where, an insulated stub-in, tee, or Y-connection occurs in the straight piping, the branch line shall be measured to the first point of contact of -bare--metal on the straight- run of'piping. The straight run-of piping shall-be measured through tiie tee or-Y, including the length of the tee as part of the run. Stub-in tees or butt-welding tees shall not be counted as a /separate fitting when computing compensation -;due CONTRACTOR. 11.0216 Measurements of insulated lines containing insulated valves, flanges, reducers, strainers, unions, and caps shall be made through these fittings, including the length of the fitting as part of the run. 11.0217 The number of fittings including bends shall be determined by actual field count. 11.0218 No allowance will be made for interference at clamps, brackets, anchors, hangers, shoes, etc. 11.03 Miscellaneous repairing and patching of existing lines and equipment may he requested by COMPANY'S representatives. Prior to performances of such work, authorization must be made by COMPANY.*.S_representative. and ,,a basis for payment made by mutual- agreement ......... ' 11.04 In special cases where no factor for payment has been specified, or where the above rules do not apply, CONTRACTOR shall obtain COMPANY'S written approval as to payment before starting work or suffer the loss of any rights to claim'payment. -