Document YGQjOyr2pyeq2NYooXrpjN7vn

Controls and Instruments Henry Valve Company MELROSE PARK, ILLINOIS (A Chicago Suburb) VALVES, DRIERS, STRAINERS, AND ACCESSORIES FOR REFRIGERATION, AIR CONDITIONING AND INDUSTRIAL APPLICATIONS ABSO-DRY PRESSURE SEALED DRIERS Listed by Underwriters' Laboratories, Inc. under re-examination service for maxi mum working pressures: Steel shell 500 psi; and brass shell 350 psi. or H-151 Activated Alumina. Volume 12 to 500 cu in. Maximum working pressure 350 psi.-Sizes: 26* through 224* ODS. STRAINERS TYPE V800 DRI-COR FILTER-DRIER incorporates an activated ceramic desic cant block for micronic filtration in com bination with granular desiccant for high efficiency drying with low pressure drop. Drying and filtering are properly pro portioned. Steel shell, brass end connec tions, durable nylon seal caps. Sizes: 26* through fl. and ODS. (ODS Driers not pressure sealed.) 891 and 892. Straight-through type, steel shell, brass end connections, 80 mesh monel screen; area, 11 and 21 sq in. Sizes*. 24* through 26* flare and 26* through 124* ODS. TYPE 893 Strainer. Steel shell, brass end connections. 80 mesh replaceable monel screen; area, 10 and 19 sq in. Sizes: 24* through 24* flare an<* 14* through 124* ODS. TYPE V-200 FILTER-DRIER. Filled with tH-151 Activated Alumina balls. Multi-stage filtering through screen cone or cylinder and glass wool filter outlet element. Steel shell, brass end connec tions. Durable nylon seal caps. High capacity and large filter area. Sizes: 26* through %" flare and ODS. TYPE V-400 Steel Shell and V-600 Brass Shellr3 Driers. Brass end connections. Standard desiccant is Davison's PA-400 Silica Gel. High capacity. Sizes: 24* through %" flare. TYPE 74 DRIER--All brass construction. Volume 50 through 100 cu in. Sizes: 24* and flare and ODS. TYPE 743 Refillable type. Brass Shell. Dispersion tube. Forged brass end caps. Volume 14 through 50 cu in. Sizes: 26* through $6" flare. TYPE 895 Y Strainer. Steel shell. Forged brass end caps--integral end connec tions. 80 mesh monel replaceable screen cylinder. Screen area, 10 through 150 sq in. Sizes: 26" through 424* ODS. Other types include forged brass and cast bronze Y strainers, with 40 or 80 mesh monel replaceable screen cylinder. Suitable for water, brine and steam service. 4 through 36 sq in. screen area, in 24* through 2" FPT sizes. TYPE 866 Flanged Angle Strainer. Brass shell, forged brass end caps with integral ionnections. Replaceable, 100 mesh nonel screen cylinder. Reinforced, (ex? ;ept 10 sq in.) Screen area: 10 through lo0 so in. Sizes: 26" through 426* ODS. ^ Types 77, 78 & 79 Flanged Angle Car tridge Driers. Choice of PA-400 Silica Gel Also Strainers and Scale Traps .dtf . for Ammonia Stocked by Wholesalers. Ask for Catalogs 288 Controls and Instruments Henry Valve Company MELROSE PARK. ILLINOIS (A Chicago Suburb) VALVES. DRIERS, STRAINERS AND ACCESSORIES FOR REFRIGERATION, AIR CONDITIONING AND INDUSTRIAL APPLICATIONS PACKLESS VALVES Approved under safety codes. Most sizes meet ASME standards. National Board Certified. Most types have pressure set ting range 50 to 450 psi. For refrigerants12, 22, etc. "Qotden Bantam" "Blue Bantam" -- -- .-- - ...... a UJ gcU U1 (too body, compact, light weight. Teflon diaphragm. Working pressure to 400 psi. Sizes:34' through fl. and ODS. "BLUE BANTAM" Forged brass body. Balanced-action makes valve non-direc- tional for pressure differential up to 350 psi. For higher pressures to 500 psi, direc tion of flow must be under seat. Sizes: Yi through %' fl. and ODS. STANDARD TYPE Same characteristics as "Blue Bantam" except lower stem back-seats, permitting diaphragm in spection and replacement under line pressure. Sizes: 54" through 54' fl.; and Yi" through 134" ODS. -------------- "V" BV capacity: brass.. Sizes 34' through 1' MPT or FPT inlet, with fl. or FPT out let. Controlled cushion cup seat disc assures safe accurate opening. TYPE 52 Angle Relief Valve; forged brass. Sizes: 34', 54' and 34" MPT in let x fl. outlet and %" ODS inlet and outlet. TYPE 522. Atmospheric relief. Brass. Sizes: 34' and 34' MPT inlet. Also available: Forged brass angle diaphragm type and combination diaphragm and rupture disc relief valves. AMMONIA ANGLE RELIEF VALVE. Semi-steel body, stainless steel trim. Sizes: 34" through 2" FPT. Also avail able: Packaged dual relief valve assem blies in }4", ?4' and 1" FPT inlet sizes. LIQUID INDICATORS LI-16 U-ts Bronze with solder connections, sizes 34' through 434" ODS. Semi-steel with FPT connections in valve body, 34" through 2y2". Semi-steel flanged type, with separate brass ODS adapters, 134" through 5J4"; with separate steel butt weld adapters, 1" through 5"; with one piece FPT flanges, 134' through 5", or with one piece socket weld flanges, 1J4* through 5". Non-rotating, replaceable swivel disc. Back-seating design permits repacking under pressure. Stocked by Wholeealere--Aek far Catalogs type Right: LI-12 Tubular Glass Type LI-16 Glass is fused directly to brass body, double-port type. Sizes: 34' through 34' M.FL. and M.FL. x F.FL. Also with extended ends and ODS con nections. Max working pressure 500 lb. When indicator is full of liquid, a cross can be seen in window. LI-12 TUBULAR GLASS TYPE. BRASS. When indicator is full of liquid, opening on opposite side of glass has true circular shape. If empty, opening appears oval. Max working pressure 420 psi. Sizes: 34", %" and W M.FL., and M.FL. x F.FL. Seal cap indicators available in single and double port types with flare or extended ends and ODS connections. 289