Document XEOgK55LDDboK12pLYnX6VB

DownloadSearchable PDFRandom document
'LAINTIFF'S EXHIBIT TECHNICAL SPECIFICATIONS SPECIFICATIONS CLASSIFICATION CertainTeedlH CertainTeed Corporation Pipe and Plastics Group A/C Standard Product Specification T.C.O. REF. NO. SPECIFICATION NO: PAGE NO.: 47 2 Section B 5-1 supersedes: February 18, 1977 OATE OF ISSUE: MAR 5 1979 description: FLUID-TITE A/C Sewer Pipe, Couplings, and Accessories Classes 1500, 2400, 3300, 4000, 5000. 6000 and 7000 Sections A and B Section B Conformance All pipe manufactured under "Section B" of this specification will meet the requirements of the following external specifications: - Federal Specification SS-P-331d - ASTM C-428 (latest issue) Classes 6000 and 7000 in 18" through 24" are not covered by the above specifications. Pipe Lengths Standard Lengths - 13 feet, i 1.0", Random Lengths A maximum of 10 percent of the total footage of any one size and class for any one order may be furnished as random lengths at factory option. Random lengths may be from 7 feet to 12'6" in 6" increments. Short Lengths Short lengths are shipped only on customer request. When requested by the customer, the standard short length footage includes for any one order shall be as follows. Short lengths of pipe are MEO's (machined end only) and may be either % length, 6'6" 1.0"(6'0" + 1.0"); k length, 3'3" + 1.0"; 1/8 length, 19.5" +0.5". Standard Coupling One coupling suitable for the particular size and class of pipe with which it is to be used, shall be attached to each standard and random length of pipe, and shipped as a prebelled unit. Other couplings for use with includes shall be shipped loose. CTD015318 PREPARED BY: APPROVED BY: R aD Yo02-10-0023 (P927) 12/76 CONFIDENTIAL DOCUMENT - NOT TO BE DDIiSsTtrRiIbBuUtTeEdD -to UunNjAUTHORIZED PERSONNEL Page 5-2 Physical Requirements Crushing Strength Each pipe, in accordance with these specifications, shall have sufficient strength, when subjected to a three (3) edge bearing crushing test, to support not less than the indicated load shown in the following table: Size, Inches Class Minimum Crushing Strength Pounds Per Foot 8 through 16 8 through 24 8 through 24 10 through 24 10 through 24 18 through 24 18 through 24 1500 2400 3300 4000 5000 6000 7000 1500 2400 3300 4000 5000 6000 7000 - Couplings must also be capable of meeting the crushing strength requirements as specified for the appropriate size and class. " The crushing strength test shall be conducted in accordance with Standard Method of Test ASTM C-500. The specimens shall be cut from one randomly selected pipe representing 300 lengths of the same size and class of pipe or less over a 24 hour period for 21" and below and up to 7 consecutive days for 24" size. Flexural Proof Loads Each 10' through 13' length of pipe in the 8" size shall be tested in flexure across a span of 9 or 12 feet. Each pipe so tested shall support without evidence of cracks or other stress induced defects, the applicable total load is shown in the following table: Flexural Proof Loads Total Applied Load, Lbs. (12 Ft. Span) Nominal Pipe Size, Inches Class 1500 Class 2400 Class 3300 8 2025 2250 2925 Note: The above loads are 75% of the loads required for testing on a 9 foot span. Flexural proof loads are conducted in accordance with Standard Method of Test ASTM C-500 (latest issue). CTD015319 TECHNICAL SPECIFICATIONS CertainTeed El SPECIFICATIONS CLASSIFICATION: A/C Standard Product Specification T.C.O. REF. NO. SPECIFICATION NO*. PAGE NO.: CertainTeed Corporation Pipe and Plastics Group 50 2 Section B 5-3 SUPERSEDES: September 28, 1979 TKm 1980 DESCRIPTION: FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 - Sections A & B Out-of-Round The inside diameter total out-of-round tolerance at the ends of each length of pipe of a distance equal to one-half of the coupling length shall be as shown on table below. Out-of-Round Tolerances Size, Indies Allowable Variation, Inches 8 and 10, incl. 12 to 20, incl. 21 and 24 1/8 3/16 1/4 Joint Test The purchaser by designation with his order may require a proof demons tration test, on at least one size pipe on the order, to assure that assembled pipes and couplings pass the following performance tests without leaking. Straight Alignment - A hydrostatic pressure test shall be made on an assembly of two sections of pipe, properly connected with a coupling in accordance with the joint design. An equivalent alternative may be a single pipe with a coupling on each end. The assembly shall be subjected to an internal hydro static pressure of 10 psi for 10 minutes and any visible leakage shall be considered a failure of the test requirement. Maximum Deflected Position - Upon completion of the test for pipe in straight alignment, the test sections shall be deflected 5 degrees for 8" inch thru 12 inch and 3 degrees for 14 inch and larger sizes (with one-half of the deflection being between each pipe and coupling) and shall be subjected to an Internal hydrostatic pressure of 10 psi for 10 minutes. Any visible leakage shall be considered a failure of the test requirement. If the selected sample(s) fail, two additional samples shall be tested. Failure of either of these assembled,units to meet either test requirement shall be cause for rejection of the entire quantity of pipe represented by the samples. Straightness CTD015320 Each length of pipe shall not vary in straightness by more than .05 lnch/ft. of length when measured in accordance with ASTM C-500. PREPARED BY: APPROVED BY: /=zr JR.A 02-10-0023 IP927) 12/76 CONFIDENTIAL DOCUMENT - NOT TO BE DISTRIBUTED TO UNAUTHORIZED PERSONNEL OCKRirriOM: HOTTS 1980 KCIFICATION no: 2 Section B MM NO.: 5-4 FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 - Sections A & B' Marking Standard, Random and Short Lengths a JID Standard Coupling 0 General Unless otherwise directed, the marking of all A/C Sewer items in Section B shall be in green ink. At either end of the pipe, a "handling label" (see Sec. D of the General Standards Manual) shall be attached to the B.O.D. of all pipe 1/4-length and above. Standard. Random, and Short Lengths Area A At the exact center of the pipe, the following shall be stamped. CERTAINTEED SIZE - CLASS TYPE II FLUID-TITE SEWER The words CERTAINTEED are shown in block letters. Refer to I.E. Pipe stamp. Purchasing Spec. 557. Area B Either to the right or left of Area A, the follov/ing information shall be stenciled in black ink on all standard lengths. (This information may appear on random and short lengths.) First line 1 Month, day, year, plant, shift Second line Pipe No. Example: 0719788A 139 Interpretation - Pipe No. 139 manufactured on July 19, 1978 at Plant 58 on the A shift. If the manufacturing information docs not appear on random and short lengths, the date and plant No. 6hall be stenciled in black Ink on the pipe. CTD015321 TECHNICAL SPECIFICATIONS SPECIFICATIONS CLASSIFICATION: CertairileedEI A/C Standard Product Specification t.c.o. rcf. no. specification no: page no.: CertainTeed Corporation Pipe and Plastics Group 50 2 Section B 5-5 supersedes: September 28, 1979 flAY 2 8 1980oate of issue: description: FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 - Sections A & B Standard Coupling Area C At the approximate center around the coupling, the following shall be shown. CERTAINTEED SIZE - CLASS FLUID-TITE SEVER The words CERTA1NTEED are shown in block letters. Refer to l.E. Clg. stamp, Purchasing Spec. 557. Note: 14" and 16" Couplings only shall have the plant number as part of the marking as shown to the right. CERTAINTEED 14" - 3300 FLUID-TITE SEWER 58 Fitting Markinas Marking of fittings is shown along with the fittings. All fittings are narked either 2400, Heavy, Extra Heavy or 6000/7000. They are broken down into classes (refer table below). 2400 Heavy Extra Heavy 6000/7000 which are for use with Classes 1500 and 2400. which are for use with Classes1500, 2400 and 3300. which are for use with Classes 4000 and 5000. which are for use with Classes 6000 and 7000. Note: The higher classes may be used with the lower classes*'of pipe. Pre-btilled Unit Area D The plant number -shall be stamped in black ink on the coupling B.O.D. and stamped on the pipe O.D. shoulder next to where the coupling is stamped. (Minimum length is 1 inch.) PREPARED BY: 02-10-0023 4/o CTD015322 APPROVED by: R *d MFO. SALES l.E. Q.C. OTHERS J.6A. CONFIDENTIAL DOCUMENT - NOT TO BE DISTRIBUTED TO UNAUTHORIZED PERSONNEL mtc or weuc: MAV 28 1S80 weiwatmi Soi " 2 Section B MOC MO.: 5-6 FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 - Sections A & B Standard Pipe B.QD. \ QQ2 7y.CtQ'R. mjx. . I-' * . yf-l ^.. > . ./ T~Z1 oc -'/l6Z-'/l6 o.af i.a Hote: Break interior corner of pipe noee as stated on page 3-3 of this specification. Standard, Random and Short Lengths Dimensions ripe Siae, Hon. . .Inches 1.0." O.D.i" 0 0 >" e 8.00 8.80 8.96 10 10.00 10.89 11.05 12 12.00 12.99 13.15 14 14.00 15.07 15.26 is 15.00 16.11 16.30 16 16.00 17.15 17.34 18 18.00 19.23 19.48 10 20.00 21.29 21.54 11 21.00 22.37 22.62 14 24.00 25.51 25.76 X" C" t" +.05" .06" Kin. 1.15 1.15 1.15 1.15 1.15 t.15 1.15 1.15 1.15 1.15 2.44 2.81 2.81 3.19 3.19 3.19 3.81 3.81 3.81 3.81 .27 .30 .33 .36 .39 .41 .44 .48 .52 .56 ______________ B.O.P." Min. Class Class 1500 2400 Class Class 3300 4000 9.00 11.14 13.24 15.32 16.36 17.42 9.06 11.14 13.24 15.32 16.36 17.42 19.60 21.66 22.74 25.88 9.24 11.30 11.45 13.46 13.54 15.50 IS.64 16.56 16.72 17.60 17.74 19.80 ' 20.09 21.88 22.10 22.94 23.18 26.12 26.36 Class 5000 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 Class 6000 20.43 22.55 23.63 26.79 Class 7000 20.63 22.77 23.85 27.03 Tolerance: O.D.j" and 0.0.2" 8" through 16" +.02" 18" through 24" +.03" Pipe Site, Inches 0C 2 P" .06" Length of Pipe l 8 10 and 12 14,15 Sr .16 18,20, 21 & 24 16 16 18 20 .50 .62 .68 .75 Standard Length Random Length 13' +0" -1" 7' to 12'6" +0", -1" (in increment# of 6") 1/2 Standard (X.E.0.)6'6" +0", -1" or 6' +0", -1" 1/4 Standard (M.E.0.)3'3" +0", -1" 1/8 Standard (M.K.O.)19.5" +.00", -.50" CTD015323 TECHNICAL SPECIFICATIONS CertairileedEI SPECIFICATIONS CLASSIFICATION: A/C Standard Product Specification T.C.O. REF. NO. SPECIFICATION NO: PAGE NO.: CertainTeed' Corporation Pipe and Plastics Group 49 SUPERSEDES: 2 Section B 5-7 DATE OF ISSUE: June 22, 1979 SEP 2 8 1979 , description: FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A & B Standard Coupling B In. A" 8 9.55 10 11.64 12 13.74 14 16.07 15 17.11 16 18.15 18 20.48 20 22.54 21 23.62 24 26.70 B" 8.89 11.00 13.10 15.19 16.23 17.27 19.36 21.42 22.50 25.64 Dimensions H" +.00" -.06" 4.00 4.75 4.75 5.57 5.57 5.57 6.50 6.50 6.50 6.50 L" +.25" -.00" 5.75 6.50 6.50 7.25 7.25 7.25 8.25 8.25 8.25 8.25 Class 1500 10.50 12.75 15.00 17.15 18.26 19.31 Class 2400 10.50 12.75 15.00 17.15 18.26 19.31 21.63 23.81 24.96 28.22 B.O.D." +.25" -.00" Class 3300 10.59 12.75 15.00 17.15 18.26 19.31 21.63 23.81 24.96 28.22 Class 4000 Class 5000 13.00 15.24 17.48 18.61 . 19.68 22.09 24.15 25.26 28.69 13.00 15.24 17.48 18.61 19.68 22.09 24.15 25.26 28.69 Class 6000 22.47 24.67 25.81 29.15 Class 7000 22.47 24.67 *5.81 29.15 Tolerance: A and B - 8" through 16" +.025" 18" through 24" +.040" Coupling Size, In. F" Min. 8", 10". 12", 14" ,15", & 16" 18", 20", 21" & 24" .75 .75 .75 G + .04" -.00" .62 .78 1.00 J" +.03" -.00" .50 .50 .63 R" + .01" 0C +2 .20 18 .20 18 .25 12 CTDO15324 PREPARED BY: APPROVED BY: R *D M jeA 02-10-0023 {P927) 12/76 CONFIDENTIAL DOCUMENT - NOT TO BE DISTRIBUTED TO UNAUTHORIZED PERSONNEL SEP 2 8 1979 B.O.D. manhole stub Page 5-8 Harking Example: CERTAIN-TEED MANHOLE STUB 16" CLASS 2400 SEWER Kotc: 1. Refer to standard pipe for machined dimensions not shown. .2 Available in pipe sires 6" through 24" snd all classes comparable to standard pipe, 3. 6" refer to "Section A" of Std. Product Spec.. tf2 for machined dimensions not shown. Pipe Indies 6 8 10 12 14 15 16 IS 20 21 24 B.O.D." +.25" ,.00" Class Class 1500 2400 Class Class Clas6 3300 4000 5000 6.91 9.00 11.14 13.24 15.32 16.36 17.42 7.04 9.06 11.14 13.24 15.32 16.36 17.42 19.60 21.66 22.74 25.C8 7.22 9.24 11.30 13.46 15.50 16.5617.60 19.80 21.88 22.94 26.12 11.45 13.54 15.64 16.72 17.74 20.00 22.10 23.18 26.36 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 Class 6000 20.43 22.55 23.63 26.79 Class 7000 20.63 22.77 23,85 27.' DROP MANHOLE SECTION t Dimensions liEl Size, Inches Nom. I.D. O.P." .02" 6 5.80 6.66 6 7.80 8.80 10 9.55 10.89 12 11.45 12.99 14 13.60 15.07 15 14.45 16.11 16 15.50 17.15 Note: 1. in is item tor use in vertical position only. 2. Refer to standard pipe for bevel dimensions. 3. Refer to "Section A" of Standard product Spec. No. 2 for 6" bevel dimensions. Marking Example: CERTAIN-TEED DROP MANHOLE SECTION 8" SEWER FOR VERTICAL USE ONLY CTD015325 TECHNICAL SPECIFICATIONS SPECIFICATIONS CLASSIFICATION: CertainTeedB A/C Standard Product Specification T.C.O. REF. NO. SPECIFICATION NO: FADE NO.: CertainTeed Corporation Pipe and Plastics Group 50 2 Section B 5-9 supersedes: September 28, 1979 DATE OF ISSUE: MAY 2 8 1980 OCtCRIPTION: FMJID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A & B END CAP EPOXY- AC. DISC. Marking Example: CERTA1NTEED FLUID-TITE SEWER END CAP 10" 15/24/3000 S HEAVY Pipe glee Inches 8 10 12 14 15 16 18 20 21 24 I.D." Mom. 8.00 10.00 12.00 14.00 15.00 16.00 18.00 20.00 21.00 24.00 V 1.13" 4.00 4.38 4.63 5.00 5.00 5.00 5.75 5.75 5.75 5.75 m" .13" 3.00 3.35 3.38 3.75 3.75 3.75 4.25 4.25 4.25 4.25 X" Min. .50 .50 .63 .63 .63 .63 .75 .75 .75 .75 Dimension* viV> > t i.J Mi" +.00" Class -.06" 2400 Heavy 1.88 2.26 2.38 2.63 2.63 2.63 3.00 3.00 0.00 3.00 10.50 12.75 15.00 17.15 18.26 19.31 21.63 23.81 24.96 28.22 10.59 12.75 15.00 17.15 18.26 19.31 21.63 23.81 24.96 28.22 Extra Heavy e 13.00 15.24 17.48 18.61 19.68 22.09 24.15 25.26 28.69 Class 6000/ 7000 _........._...... 22.47 24.67 25.81 29.15 A/C Circular Disc. Thick Dlai*. .500 .500 .625 .625 .625 .625 .750 .750 .750 .750 8.79 10.90 13.00 15.09 16.15 17.17 19.26 21.32 22.40 25.54 Notes: 1. Refer to Standard Coupling for machining dimensions not shown. 2. A/C Circular discs per Std. Purchasing Spec. #533. CTD015326 PREPARED BY: APPROVED BY: \w J4.A. 02-10-0023 (P927) 12/76 CONFIDENTIAL DOCUMENT - NOT TO BE DISTRIBUTED TO UNAUTHORIZED PERSONNEL OMCftieriON: DATS or imuc: MAY 2 8 1980 rccirtCATtON no; 2 Section B MOC NO.; 5-10 FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 - Sections A & B Xncreaser. A/C to A/C Markins Exasq>le: CERTAINTEED FLUID-TITE SEWER INCREASER 8" TO 10" SEWER EXTRA HEAVY Pipe Size Inches A/C to A/C 6 to 8 8 to 10 10 to 12 12 to 14 12 to 15 14 to 15 14 to 26 15 to 16 15 to .18 16 to 18 16 to 20 18 to 21 20 to 21 20 to 24 21 to 24 Horn. I.D." 6.00 8.00 10.00 12.00 12.00 14.00 14.00 15.00 15.00 16.00 18.00 18.00 20.00 --21.00 Dimensions X" t.13" 2.38 2.88 3.25 3.25 3.25 3.63 3.63 3.63 3.63 3.63 4.13 4.13 4.13 --- 4.13 L" +.25" -.00" 6.25 6.75 7.25 7.75 7.75 8.25 8.25 8.25 8.75 8.75 9.25 9.25 9.25 9.25 t oo B.O.D." +.25 Extra Heavy 6000/7000 9.24 11.58 13.70 15.84 16.94 17.48 17.98 18.61 20.20 20.20 22.32 23.40 24.15 * 26.60 a* as am wan ms sms a* -(t-- m me 20.63 20.63 22.77 23.85 24.67 ** ** * Use 20x21 and 21x24 combination or request PAD adaptor by NSPI. ** Available PAD adaptor only by NSPI. Notes: 1. Refer to Standard Pipe and Coupling pages for dimensions not shown. 2, Extra Heavy Class shall be used for Extra Heavy and lower classes. 3, Machining not required on B.O.D. or I.D. TECHNICAL SPECIFICATIONS SPECIFICATIONS classification: CertairileedEI CertainTfeed Corporation Pipe and Plastics Group A/C Standard Product Specification T.C.O. REF. NO. SPECIFICATION NO: PAOE NO.: 48 2 Section B 5-11 supersedes: March 5, 1979 date of issue: JUN 2 2 1979 description: FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A and B 1U. 22%. 30. 45 and 90 Elbows L - BEFORE ANGULAR CUT *221/2 STD PPE BOTH ENOS Dimensions All Pine Sites - All Classes QC 2 2 QC t 5 Nora, 11V5 22V5 30 45 90 Elbows Elbows Elbows Elbows Elbows 5-5/8 11V5 15 22V5 22V UV5 22V5 30 45 45 Pipe Sine, Inches 8 10 12 14 15 16 18 20 21 24 Pipe Size, Inches 8 10 12 14 15 16 18 20 21 24 90 Elbowa With Flll.t V r +.J5--.W X" +.25" -.00" Mom. All Classes 2400. Heavy Extra Heavy 6000/7000 9.50 9.50 9.50 9.50 9.25 9.25 18.50 18.25 18.25 18.00 5.75 4.75 3.75 3.50 2.25 2.00 10.00 9.00 8.50 7.00 13.25 14.00 14.75 16.25 16.00 16.50 26.25 27.00 27.25 26.50 14.25 15.00 16.50 16.25 16.75 26.75 27.50 27.75 29.00 ... -- ... ---- 27.00 27.75 28.25 29.25 lurking txaaplc: CEKEAXBTEED 12" 50 EL KVT. SEWER Mote: 1. Refer to standard pipe ends for machining dimensions not shown. I.D. Norn. All Classes 8.00 10,00 12.00 14.00 15.00 16.00 18.00 20.00 21.00 24.00 L" +.00" -.50" 19.50 19.50 19.50 19.50 19.50 19.50 39.00 39.00 39.00 39.00 2400 9.06 11.14 13.24 15.32 16.36 17.42 19.60 21.66 22.74 25.88 B.O,,D." Hin. Extra Heavy Heavy 9.24 11.30 13.46 15.50 16.56 17.60 19.80 21.88 22.94 26.12 11.58 13.70 15.84 16.94 17.96 20.20 22.37 23.40 26.60 6000/ 7000 ... ... ._._. __ 20.63 22.77 23.85 27.03 Epoxy all adjoining surfaces. Remove excess on Inside for smooth surface. For fabrication of 90 elbows, add fillet to center of 45 elbow. Epoxy fillet on all outside adjoining pieces. Tolerance on 90 elbows 5. Ccrfca-epacer required on one end. CTD015328 PREPARED BY: APPROVED BY: 02-10-0023 (P927) 12/74 CONFIOINTIAL DOCUMENT - NOT TO BE olsTRIBUTCD TO UNAUTHORIZED PERSONNEL 45 Wye Fitting Son-Reducing Page 5-12 .v v. ^ 1 n -U Mein Pipe ll. Inch.. 8x8 10 x 10 12 x 12 u*u 15 x 15 16 x 16 18 x 18 20 x 20 21 x 21 24 x 24 Koa. I.D.i" All Classes 8.00 10.00 12.00 14.00 15.00 16.00 18.00 20.00 21.00 24.00 2400 9.06 it. 14 13.24 15.52 16.36 17.42 19.60 21.66 22.74 25.88 Hmvt 9.24 11.30 13.46 15.50 16.56 17.60 19.80 21.88 22.94 26.12 B.0.0.1" Kin. Extra Bmw 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 6000/7000 .................. 20.63 22.77 23.85 27.03 Branch Pipe lisa. Inches 4 5 6 8 10 12 14 15 16 18 20 21 24 He*. 1.0.9" All Clesaes 2400 B.O.P.?" Hin. Heavy Extra Heavy 6000/7000 4.00 5.00 6.00 8.00 10.00 12.00 14.00 15.00 16.00 18.00 20.00 u.to 24.CD 4.87 4.87 5.98 5.98 7.04 7.04 9.06 9.24 11.14 11.30 13.24 13.46 13.32 15.50 16.36 16.56 17.42 17.60 19.60 19.80 21.66 , 21.88 - 22.74 * 22.94 25.88 26.12 ...... ... 11.58 is. 70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 ... ... _._._. ... ... ... ... 20.65 22.77 23.85 27.03 V +0.00" -3.00" 2400. Hmtt. Extra Hravv tad 6000/7000 lUln Pipe Branch Site. Inches Sice, luches Jt _5 _6 __8 10 12 14 15 16 18 20 21 24 8x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 13 x 18 20 x 20 21 x 21 24 x 24 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 52 52 52 52 39 39 39 39 39 39 52 52 52 52 52 39 39 39 39 39 39 52 52 52 52 51 52 39 39 39 39 39 39 52 52 52 52 52 52 78 ! For Mia and branch Machining dt--loas, refer to tUaUri pipe anda. 2 lithe end of nalo shown shove if to be prebelled (with certa-spacer) before ni(enc( Branch Sice. In. 2400 4 4.89 5 6.00 6 7.06 8 9.06 10 11.16 12 13.26 14 15.34 15 16.38 16 17.44 18 19.62 20 21.68 21 22.76 C* +,04M -.01* Heav* 4.89 6.00 7.06 9.08 * 11.32 13.48 15.52 16.58 17.62 19.82 21.90 25.05 Ex. Heavy -- .----..- 11.60 13.72 15.86 16.96 18.00 20.22 22.34 23.68 6000/7000 .._................... 20.22 * 22,34 + 23.64 Branch end nay hava to be --chined to fit* CTD015329 TECHNICAL SPECIFICATIONS SPECIFICATIONS CLASSIFICATION: CertairileedEI CertainTeed Corporation Pipe and Plastics Group A/C Standard Product Specification T.C.O. REF. NO. 48 SPECIFICATION NO: 2 Section B FADE NO.: 5-13 supersedes: OATE OF ISSUE: March 5, 1979 JUN 2 2 1979 description: FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A and B Main Site, Inches If" +.00" -.25" All Classes ______________ Branch Size. Inches 10 12 14 15 16 18 21 24 6xfl 10 x 10 12 x 12 14 x 14 15 x 15 -16 16 18 18 20 : 20 21 ; 21 24 x 24 11.9 11.8 12.2 12.2 13.4 12.1 13.2 13.8 14.0 13.7 11.9 U.S 12.2 12.2 14.2 12.1 13.2 13.8 14.8 13.7 11.9 11.8 12.2 12.2 14.9 12.1 13.2 13.8 15.6 13.7 13.4 14.3 15.7 17.7 16.7 19.6 21.9 23.8 17.3 25.7 15.8 15.7 17.7 18.2 19.6 21.9 23.6 18.8 25.7 17.2 17.7 19.8 19.6 21.9 23.6 20.4 25.7 19.2 21.3 19.6 21.9 23.8 22.0 25.7 22.1 19.6 21.9 23.8 22.7 25.7 21.1 21.9 23.8 23.5 25.7 23.9 23.8 25.1 25.7 25.3 26.6 25.7 27.5 25.7 28.7 4 .00" Ml" -1.00" All Classes 4 10.75 5 11.50 6 14.25 8 17.25 10 19.75 12 20.75 14 25.00 15 27.50 16 27.SO 18 30.50 20 34.00 21 35.00 Inches 8 X6 10 X 10 12 X 12 14 X 14 15 X 15 16 X 16 16 X 16 20 X 20 21 X 21 24 X 24 lA" - All Classes Branch Site, Incites 4 5 6 8 10 12 14 15 16 18 20 21 24 16.5 17.5 19.0 20.0 21.7 21.0 24.0 25.0 25.5 27.0 16.5 17.5 19.0 20.0 22.5 21.0 24.0 25.0 26.3 27.0 16.5 17.5 19.0 20.0 23.2 21.0 24.0 25.0 27.1 27.0 19.0 20.0 22.5 25.5 25.0 26.5 32.0 35.0 28.8 37.0 22.0 22.5 25.5 26.5 28.5 32.0 35.0 30.3 37.0 23.5 25.5 28.1 28.5 32.0 35.0 31.9 37.0 27.5 29.6 28.5 32.0 35.0 33.5 39.0 30.4 28.5 32.0 35.0 34.3 39.0 31.5 32.0 35.0 35.0 39.0 34.5 35.0 36.6 39.0 37.5 36.2 39.0 39.0 39.0 42.0 In" +.00" -.06" 2400 S5vy~ 8*. JUiVr 6000/7000 8 8.06 7.95 10 8.55 8.36 6.02 12 7.52 7.25 6.96 14 9.01 8.79 8.36 15 10.55 10.39 10.12 it 10.47 10.25 9.80 18 10.84 10.60 10.12 20 11.35 11.09 10.56 21 11.42 11.28 10.95 24 10.76 10.47 9.69 ___ ... ... ... ... 9.31 9.20 10.64 9.59 Inches 8X8 10 X 10 12 X 12 14 X 14 15 X 15 16 X 16 18 X 18 20 X 20 21 X 21 24 X 24 F" - All Classes Branch Slxo-, Inches 4 5 6 8 10 12 14 15 16 14.00 15.25 16.75 18.25 21.40 19.50 21.00 22.25 25.70 25.25 14.00 16.25 19.00 15.50 17.75 19.50 21.75 17.75 19.00 20.75 22.75 23.50 18.25 20.50 23.25 24.00 25.75 27.25 21.90 22.30 24.80 26.30 26.20 29.70 19.75 22.00 23.75 25.25 25.00 28.50 21.00 23.25 25.00 26.75 26.50 29.75 22.50 24.75 26.50 28.25 27,75 31.25 26.10 26.60 29.00 30.50 32.50 33.90 25.50 27.50 29.50 31.00 30.75 34.00 + .00" -.06H 24 2400 Bmvy EX. MT 6800/7800 8 10.88 21.00 10 24.31 24.34 12 26.42 26.29 14 30.6B 30.71 13 33.67 33.81 16 35.11 35.15 18 38.56 38.60 20 41.99 42.03 21 43.58 43.72 24 46.71 47.41 24.40 26.34 30.78 34.08 35.24 38.69 42.13 44.05 47.51 --- -- ... 36.49 41.40 44.36 47.81 ________ 2400 Hecvv x .25" Ex. Heavy 6000/7000 8 17.06 17.06 10 19.42 19.42 12 20.73 20.73 14 24.07 24.07 15 26.20 26.20 16 26.63 28.63 18 30.15 30.15 20 32.69 32.69 21 33.40 33.40 24 36.31 36.31 _ 19.36 20.76 24.04 26.20 27.60 30.05 32.65 33.40 36.25 __ -- --- -- -- -- 30.05 32.65 33.40 36.25 CTD015330 If'1 + .25 2400 ( Heavy Ex. Heavy 8 7.85 10 8.30 12 7.52 14 8.76 15 9.84 16 10.22 18 10.59 20 11.10 21 10.66 24 10.51 7.73 8.16 7.40 8.61 9.64 10.10 10.35 10.84 10.46 10.22 7.77 6.99 8.15 9.26 9.64 9.87 10.31 10.00 9.64 6000/701 mmm __ ___ ___ 9.42 9.88 9.55 9.22 PREPARED BY! 02-10-0023 (P927) APPROVED SY: R aO >n/|& 12/76 CONFIDENTIAL DOCUMENT - NOT TO C MFO. SALES I.E. OTHERS UNAUTHORIZED PERSONNEL Kale Pipe Slut. Inch*. x8 10 x 10 12 x 12 14 x 14 15 x 15 U x 16 16 x 18 20 x 20 21 x 21 24 x 24 *<m. l.D.i" All CIA.... 8.00 10.00 12.00 14.00 15.00 16.00 16.00 20,00 21.00 24.00 2400 9.04 11.14 13.24 15.32 16.36 17.42 19.60 21.66 22.74 25.86 lam 9.24 11.30 13.46 15.50 16,56 17.60 19.60 21.86 22.94 26.12 B.0.D.1" Min. txtr. Hexvv 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 6000/7000 -- --... ... ... 20.63 22.77 23.85 27.03 Branch Pipe Site. Inchas 4 5 6 8 10 12 14 15 16 18 20 21 24 Mon. I.ft.*"B.O.D.?" Min. All Classes 2400 Heavy Extra Heavy 4.00 5.00 6.00 8.00 10.00 12.00 14.00 15.00 16.00 18.00 20.00 21.00 24.00 4.87 5.96 7.04 9.06 11.14 13.24 15.32 16.36 17.42 19.60 21.66 22.74 25.88 4.87 3.98 7.04 9.24 11.30 13.46 15.50 16.56 17.60 19.80 21.88 22.94 26.12 ... -- ----- 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 6000/7000 ... ---- ----... 20.63 22.77 23.S5 27.03 L* 40.Qg1 -3,00*' 2400. Heavy. Extra Heavy end 6000/7000 Main Pipe 8i*a,. Inches 8X8 10 X 10 12 X 12 14 X 14 15 X 15 16 X 16 18 X 18 20 X 20 21 X 21 24 X 24 Branch Site. Inches _4 _S _6 JJ 10 12 14 15 16 18 20 21 24 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 52 52 52 52 39 39 39 39 39 39 52 32 52 52 52 39 39 39 39 39 39 52 52 52 52 52 52 39 39 39 39 39 39 52 52 52 52 52 52 78 t Woe.! l. Far Mia and branch machining diaraalou, refer Co aCandard pipe and*. 1. HIshe end ofaiin shown above la to be prebelled (with carta-apacar) before shipment. Branch Sire. In. 4 5 6 8 10 12 14 15 16 18 20 21 ______________ C +.04** -.01" 2400 4.89 6.00 7.06 9.08 U. 16 13.26 15.34 16.38 17.44 19.62 21.68 22.76 Heavy 4.89 6.00 7.06 9.08 * 11.32 13.48 15.52 16.58 17.62 19.62 21.90 23.05 Ex. Heavy -- -- ---- 11.60 13.72 13.86 16.96 18.00 20.22 22.34 22.68 6000/7000 -- ... -- --- --... ... ... 20.22 * 22.34 * 23.68 * ^Branch end nay have Co be aachlned to fit. CTD015331 TECHNICAL SPECIFICATIONS SPECIFICATIONS CLASSIFICATION! CertairileedlH CertainTeed Corporation Pipe and Plastics Group A/C Standard Product Specification T.C.O. REF. NO. 48 SPECIFICATION NO: 2 Section B PAGE NO.: 5-15 supersedes: March 5, 1979 date of issue: JUN 2 2 1979 DESCRIPTION: FLUID-TITE A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A and B Hals Sice, Inches 4 6x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 20 x 20 21.x 21 26 x 24 9.9 10.2 10.2 10.5 11.4 10.5 11.2 U.2 12.0 11.3 iEl* +.00" -.25" Ail Classes Branch Size, Inches 5 i 8 10 u 14 15 16 18 20 n 24 9.9 10.2 10.2 10.5 12.1 10.5 11.2 11.2 12.6 11.3 9.9 10.2 10.2 10.5 12.7 10.5 11.2 11.2 13.1 11.3 11.4 11.7 13.1 14.5 14.1 16.4 18.2 19.6 14.7 21.3 13.2 13.1 14.5 15.4 16.4 18.2 19.6 15.9 21.3 14.6 14.5 16.7 16.4 18.2 19.6 17.2 21.3 16.0 17.9 16.4 18.2 19.6 18.5 21.3 18.6 16.4 18.2 19.6 19.1 21.3 17.4 18.2 19.6 19.7 21.3 19.7 19.6 21.1 21.3 21.1 22.3 23.0 21.3 21.3 13.8 All 4 5 6 B 10 12 14 15 16 18 20 21 9.75 9.75 9.75 11.75 12.50 14.75 16.75 19.75 18.75 20.25 21.00 24.50 Size, Inches 8x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 20 x 20 21 x 21 24 x 24 4 12.5 13.5 14.0 15.0 16.2 15.5 17.0 17.5 18.6 19.0 --*S____ _ VAgZZ Branch Size. Inches 5 6 8 10 14 15 16 18 20 21 24 12.5 13.5 14.0 15.0 16.9 15.5 i7.0 17.5 19.3 19.0 12.5 13.5 14.0 15.0 17.5 15.5 17.0 17.5 19.9 19.0 14.0 15.0 17.0 19.0 18.9 21.5 24.0 26.0 21.3 29.0 16.5 17.0 19.0 20.1 21.5 24.0 26.0 22.6 29.0 18.5 19.0 2X.4 21.5 24.0 26.0 23.9 29.0 20.5 22.7 21.5 24.0 26.0 25.1 29.0 23.3 21.5 24.0 26.0 25.8 29.0 22.5 24.0 26.0 26.4 29.0 25.5 26.0 27.7 29.0 27.5 29.0 29.6 29.0 29.0 31.0 2400 Lo" + .00" -.06' 6000/7000 8 6.15 6.07 10 6.85 6.71 12 7.03 6.84 14 7.23 7.08 13 9.15 9.04 i>16 7.41 7.26 8.53 8.35 20 8.74 6.55 21 9.87 9.76 24 8.59 8.36 6.47 6.64 6.78 8.82 6.93 8.01 8.17 9.49 7.96 -- .__ ___ -- 7.79 7.95 9.23 8.19 Mein Size, Inches 8x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 20 x 20 21 x 21 24 x 24 F" - All Classes Branch Size , Inches 12t 5 6 8 10 _ 14 15 16 18 20 21 24 13.00 14.00 15.25 16.50 17.30 17.50 18.75 20.00 20.70 22.25 12.75 12,25 14.00 12.75 13.50 14.75 15.00 14.75 18.00 16.00 15.75 17.25 17.70 18.70 19.80 17.25 17.00 18.25 18.50 18.00 19.50 19.50 19.25 20.50 21.10 21.60 23.20 22.00 21.50 23.00 16.25 16.25 18.25 17.25 19.00 20.25 20.70 22.10 23.30 18.50 20.00 21.50 19.50 21.25 22.50 20.75 22.25 23.75 24.10 25.50 26.70 23.00 24.75 26.00 23.30 22.00 23.25 23.00 24.00 24.25 25.25 27.10 27.60 26.50 27.50 25. ?5 26.00 28.90 26.50 27,50 29.30 29.60 28.50 27.50 31.00 im. 8 16.63 10 19.72 12 22.32 14 24.92 15 28.05 16 27.53 x IB 31.16 20 33.73 21 36.13 24 38.47 LE" +.00" -.06" 16.73 19.76 22.39 24.97 28.16 27.58 31.24 33.82 36.24 38.54 Ex. Heavy mmm 19.84 22.45 25.07 28.38 27.69 31.35 33.94 36.51 38.68 6000/7000 ,_ -- -------- ---31.61 34.25 36.77 39.41 Pipe Size. In. 8 10 12 14 15 16 18 20 21 24 Ic" t .25" 2400 11.34 13.04 14.43 15.83 18.60 18.22 19.59 21.25 23.00 23.53 Heavy 11.30 13.00 14.40 15.80 18.60 18.19 19.55 21.19 23.00 23.46 Extra Hesw __ 12.91 14.30 15.69 18.60 18.09 19.42 21.06 23.00 23.32 6000/ 7000 __ --- -- -- --- -- 19.42 21.06 23.00 23.32 Pipe Size, Ir. 8 10 12 14 15 16 18 20 21 24 Lp" + .25" 2400 6.00 6.60 6.78 6.98 9.15 8.17 8.28 8.74 9.87 8.59 Heavy 5.92 6.52 6.73 6.68 9.04 8.08 8.10 8.55 9.76 8.38 Extra Heavy _ 6.22 6.40 6.55 6.62 7.75 7.76 8.17 9.49 7.97 CTD015332 6000/ 7000 ... __ ... ... 7.51 7.91 9.23 7.71 approved sy: RD MFC. c 02-10-0023 (P927) 12/76 CONrlOCNTIAL DOCUMENT - MOT TO SC DI5TBIB' SALES I.E. OTHERS :d to unauthorized personnel Page 5-16 -eoDg- - i-O.g, * Marking Example: CERTAINTEED 8x8x8 TEE HVY. SEWER Main FIpa 8Isa. Inches 8x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 20 x 20 21 x 21 24 x 24 411 Claaa.a 8.00 10.00 12.00 14.00 15.00 18.00 18.00 20.00 21.00 24.00 2400 9.06 11.14 13.24 15.32 18.36 17.42 19.60 21.66 22.74 25.88 Baavv 9.24 11.30 13.46 15.50 16.56 17.60 19.80 21.88 22.94 26.12 8.0.0.1" Min. xtr. Heavy 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 6000/7000 ... ... ... ... ... ... 20.63 22.77 23.85 27.03 ranch Pipe Size. Inches 4 5 6 8 10 12 14 15 16 18 20 21 24 lto. I.D." All Claaaas 2400 4.00 5.00 8.00 8.00 10.00 12.00 u.oo IS.00 16.00 18.00 20.00 21.00 24.00 4.87 5.98 7.04 9.06 11.14 13.24 15.32 16.36 ' 17.42 19.60 21.66 22.74 25.88 Heavy 4.87 5.98 7.04 9.24 11.30 13.46 15.50 16.56 17.60 19.80 21.68 22.04 26.12 B.O.D.V* Kin. Extra Heavy ... ... ... ... 11.58 13.70 15.84 16.94 17.98 20.20 22.32 23.40 26.60 6000/7000 ... ... ... ... ... ... ... ... 20.63 22.77 23.65 27.03 y." +0.00" -3,0011 2400, H--tt. Extra Heavy and 6000/7000 Main Pipe ____________________Branch Site* Inches Size,. Inches 4 _5 _6 _8 10 12 14 15 16 18 20 24 8Xe 10 X 10 12 X 12 14 X 14 IS X 15 16 X 16 16 X 18 20 X 20 21 X 21 24 X 24 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 39 52 52 52 52 39 39 39 39 39 39 52 52 >2 52 52 39 39 39 39 39 39 52 52 52 52 52 39 39 39 39 39 39 52 52 52 52 52 78 Em' 1. ter anln ond branch mchining dlmnstons, rofor to fttoi 1. tight and of Min shevn abort In to bo prebelled (vltfa certa-spacer) before ihlpMat. Branch Size. In. 2400 4 4.89 5 6.00 6 7.06 8 9.08 10 11.16 12 13.26 14 15.34 15 16.38 16 17,44 18 19.62 20 21.68 21 22.76 C" +.04" -.01" Heavy 4.89 6.00 7.06 9.08. 11.32 13.48 15.52 16.58 17.62 19.62 21.90 21.05 Ex. Heavy -- .--.. ... 11.60 13.72 15.86 16.96 18.00 10.U 22.34 23.68 6000/7000 ... ... ... ... ... ... ... ... -i.. 20.22 * 22.34 * 23.68 * CTD015333 TECHNICAL SPECIFICATIONS CertainleedH CertainTeed Corporation Pipe and Plastics Group SPECIFICATIONS CLASSIFICATION: A/C Standard Product Specification T.C.O. NEF. NO. 48 SPECIFICATION NO: 2 Section B PACE no.: 5-17 supersedes: March 5, 1979 DATE OF ISSUE: JUN 2 2 1979 oucnirtion: FLUID-TITE A/C Sewer Pipe, Couplings and Aoceaaorlea Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A and B Pipe 81b* , Inches Lq +.000" -0.300" - All C!*** Branch Size. Inches 6 10 12 14 15 16 18 20 21 8 8 4.75 4.75 6.25 10 10 5.00 5.00 6.50 6.50 12 12 5.00 5.00 6.50 6.50 6.75 14 14 5.00 5.00 6.50 6.50 7.00 7.00 15 15 7.00 7.00 7.00 8.10 8.10 8.60 9.10 16 16 5.00 5.00 6.50 6.50 7.00 7.00 7.25 7.00 IS 18 5.25 5.25 6.75 6.75 7.25 7.25 7.50 7.25 7.50 20 20 5.25 5.25 6.75 6.75 7.25 7.25 7.50 7.50 7.50 8.25 21 21 7.40 7.40 7.40 8.50 8.50 .00 9.50 9.50 9.50 10.00 10.00 24 24 5.50 5.50 6.75 7.00 7.50 7.50 7.50 7.50 7.50 8.25 8.25 8.25 F" - All Claaaaa Main Branch Size, Inches Inches 4 5 6 8 10 12 14 15 16 18 20 21 24 8x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 20 x 20 21 x 21 24 x 24 8.75 10.00 11.00 12.00 14.50 13.00 14.25 15.25 17.90 17.50 8.75 10.00 11.00 12.00 14.50 13.00 14.25 15.25 17.90 17.50 10.25 11.50 12.50 13.50 14.50 14.50 15.75 16.75 17.90 18.75 10.25 11.50 12.50 13.50 15.60 14.50 15.75 16.75 19.00 19.00 11.75 12.75 14.00 15.60 15.00 16.25 17.25 19.00 19.50 12.75 14.00 16.10 15.00 16.25 17.25 19.50 19.50 14.25 16.60 15.25 16.50 17.50 20.00 19.50 16.60 15.00 16.25 17.50 20.00 19.50 15.25 16.50 17.50 20.00 19.50 17.25 18.25 20.50 20.25 18.25 20.50 20.25 20.50 20.25 20.25 V t .* - All Claaaaa 8 x 6 X4 1C xtu X 12 xl2 X 4 14 xl4 X 4 15 xl5 X 4 16 xl6 X 4 18 xl8 X 4 20 x20 X 4 20 x20 X 14 71 x21 X 4 21 x21 X 14 21 x2l X 21 24 x24 X 4 24 x24 X 14 24 x24 X 24 through through through through through through through through through through through through through 8x6X8 10 xlO X 10 12 xl2 X 12 14 xl4 X 14 15 x!5 X 15 16 xl6 X 16 18 xia X 18 20 x20 X 12 20 x20 X 20 21 x21 X 12 21 x21 X 20 24 x24 X 12 24 x24 X U 11.0 12.5 13.5 14.5 16.6 16.5 18.5 13.0 19.5 15.5 19.9 20.5 13.0 19.5 21.5 Site. In, 8 10 12 14 15 16 13 20 21 24 y* -1 83" 2400 5.63 6.18 6.13 6.5* 8.40 6.54 7.45 7.42 9.13 7.31 5.72 4.13 6.M 6.53 8.40 6.49 7.35 7.31 9.03 7.1* Extra "5557 Beavy 7000 5.96 S.91 6.34 8.40 6.30 7.15 7.09 8.80 6.95 6.94 6.87 8.58 6.74 1" + .00" -.or* Pipe Ice. In. 2490 JfafiEZ e 10 12 14 15 16 18 80 81 M PftflPAAED IT: AtW 6.47 6.93 6.88 6.84 8.42 7.79 8.70 8.67 9.13 0.34 6.38 6.83 6.77 6.75 8.32 7.70 8.60 8.36 9.03 8.44 Ext*A Bawnr __ 6.71 6.65 6.58 8.13 7.31 8.40 8.34 8.80 0.80 To5o7 7000 .... ----- --- --- 8.19 8.11 8.38 7.99 ft a O 02-10-0023 (P927) 12/76 CONFIOCMTIAL DOCUMENT - MOT TO BC D Pipe Sice. In. 8 10 12 14 15 16 M to 21 >4 V +.00" #6" Sxtr. 2400 9am B..VT 15.53 18.07 20.12 22.16 24.76 23.21 28.30 S0J3 31.87 34.44 . ' l.. B.ir 18.13 80.83 88.83 24.88 25.30 88.40 30.44 31.9 34.18 18.29 20.35 22.42 25.07 25.49 80.40 30.04 38 JO 34.00 ~6ttoo/ 7000 ___ _.._. ... ... ... 80.08 30.00 38.43 33.00 O UNAUTHORIZED PCftBONNKL CTD015334 Pag* 5-U This P*e left intention* Uy CTD015335 TECHNICAL SPECIFICATIONS CertairileedEI SPECIFICATIONS CLASSIFICATION: A/C Standard Product Specification T.C.O. REF. NO. SPECIFICATION NO: PAGE NO.: CertainTeed Corporation Pipe and Plastics Group 49 supersedes: 2 Addendum A-l DATE OF ISSUE: SEP 2 8 1979 DESCRIPTION: A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A and B Common Groove End Cap -AC. DISC. Marking Example: CERTAINTEED END CAP 15" 15/24/3300 S HVY. 15" and 21" Common Groove End Caps shall be stamped or stencilled on the B.O.D. "CG ONLY". Given below are the dimensions to be used when making End Caps which require old design (CG) coupling machining for 15" and 21" sizes. Dimensions Pipe Size, Inches 15 21 I.D." Norn. 15.00 21.00 L *.13" 5.83 6.58 L]" +.13" 4.58 5.08 X" Min, .63 .75 Ml" +.00" -.06" 3.08 3.71 B.O.D. +.25" -.00" Class 2400 Extra Heavy . Heavy 18.26 18.26 18.61 24.96 24.96 25.26 Class 6000/ 7000 -- 25.81 A/C Circular Discs Thick Dia. .625 16.15 .750 22.40 Motes: 1. Refer to page 5-7A for coupling machined dimensions not shown here 2. A/C Circular Discs per Standard Purchasing Spec. #533. CTD015336 PREPARED BY: APPROVEO BY: R *D MFG. SALES I.E. /*IS 0t J.6A- 02-10-0023 (P927) 12/76 CONFIDENTIAL DOCUMENT - NOT TO BE DISTRIBUTED TO UNAUTHORIZED PERSONNEL OTHERS SEP 2 8 1979 SPECIFICATION NO: 2 Addendum PAGE NO.: A-2 A/C Sewer Pipe, Couplings and Accessories Classes 1500, 2400, 3300, 4000, 5000, 6000 and 7000 Sections A & B Increasers A/C to A/C Pipe Size Inches - A/C to A/C 12 to 11 14 to 15 1 C to 16 15 to 18 18 to 21 20 to 21 21 to 24 Norn. I.D." 12.00 14.00 15.00 15.00 18.00 20.00 21.00 Dimensions X" 1.13" 4.00 4.55 4.55 4.55 5.05 5.05 5.05 L" +.25" -.00" 8.50 8.75 8.75 9.50 10.25 10.25 10.50 B.O.D." +.25 Extra Heavy 6000/7000 16.94 17.48 18.61 20.20 23.40 24.15 26.60 -- -- -- 20.63 23.85 24.67 ** o0 1 **Available as a PAD Adaptor only by NSP1. Notes: 1. Refer to pages 5-6A (pipe) and 5-7A (coupling) for 15" and 21" CG dimensions not shown and standard pipe and coupling pages fo'r all others. 2. Extra Heavy Class shall be used for Extra Heavy and Lower Classes. 3. Machining not required on B.O.D. or I.D. CTD015337