Document X8Rxd3epDvaqpGkZ2qEq9bg7w

DownloadSearchable PDFRandom document
t PVC PIPE RESOURCE REPORT PiMuhmdbftm Pip0 fluoiif Crp&*ZM$on 0,lhm ***-- Technical Information Available Information on the use of PVC pipe in water distri bution, waste water handling and plumbing sys tems is available from the following organizations. The publications listed are subject to availability and there may be a charge for some items. To order these publications, contact each organization directly. From the American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, PA 19103 (215) 299-5400; Standard Practicefor Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings, Designation: D2855. Standard Specificationfor Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core, Designation: F891. Standard Specificationfor Corrugated Poly (Vinyl Chloride) Tubing and Compatible Fittings, Designation: F800. Standard Specificationfor Poly (Vinyl Choride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings, Designation: F 949. Standard Specification for Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings, Designation: F 679. Standard Specificationfor Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings, Designation: D 2665. Standard Specificationfor Poty (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40, Designation: D 2466. Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40,80, and 120, Designation: D 1785. Standard Specification for Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series), Designation: D 2441. Standard Specificationfor Poly (Vinyl Chloride) (PVC) Ribbed Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter, Designation: F 794. Standard Specificationfor Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings, Designation: D 2729. Standard Specification for Socket-Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80, Designation: D2467. Standard Specificationfor Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systemsfor High way, Airport, and Similar Drainage, Designation: F758. Standard Specification for Threaded Poly (Vinyl Chlo ride) (PVC) Plastic Pipe Fittings, Schedule 80, Designation: D2464. Standard Specification for 325-In. Outside Diameter Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings, Designation: D 2949. Standard Specificationfor Type PS-46 Poly (Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings, Designation: F 789. Standard Specificationfor Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings, Designation: D 3034. From the American Water Works Association (AWWA), 6666 West Quincy Avenue, Denver, CO 80235. (303) 794-7711: AWWA Standardfor Polyvinyl Chloride (PVC) Pressure Pipe, 4 Inch Through 12 Inch, For Water Distribution, published in 1989. Describes ANSI/AWWA standard C900-89. AWWA Standardfor Polyvinyl Chloride (PVC) Water Transmission Pipe, Nominal Diameters 14 Inches Through 36 Inches, published in 1988. Describes ANSI/AWWA standard C905-88. CTL029408 The Vinyl Institute, A Division of The Society of the Plastics Industry, Inc Wayne Interchange Plaza II, 155 Route 46 West. Wayne, New Jersey 07470. (201) 890-9299 Recommended Methodfor Calculation ofNominal Weight ofPlastic Pipe, Report number TR7. Recommended Practicefor Making Solvent Cemented Joints with Polyvinyl Chloride (PVC) Pipe and Fittings, Report number TRIO. Recommended Service (Design) Factorsfor Pressure Applications of Thermoplastic Pipe Materials, Report number TR9. Resistance of Thermoplastic Piping Materials to Microand Macro-Biological Attack, Report number TR11. Sealantsfor Polyvinyl Chloride (PVC) Plastic Piping, Report number TN2. Standardsfor Plastic Piping (A listing of standards published by all North American standards organiza tions.), Report number TR5. Suggested Temperature Limitsfor Thermoplastic Piping in Non-Pressure Applications, Report number TNI 1. Thermal Expansion and Contraction of Plastic Pipe, Report number TR21. Water Flow Characteristics of Thermoplastic Pipe, Report number TR14. Weatherability of Thermoplastic Piping, Report number TR18. From tho Plastic Pip* ami Fittings Association (PPFA),800 Roosevelt Road, Building C, Suite 20, Glen Ellyq, IL 60137-5833. (708)858-6540: Crush Strength and Flexibility of Thermoplastic Piping, Bulletin number 1-80. The Growing World ofPlastics Piping: A Comprehen sive Lasting of Common Applications ofPlastic Plumb ing Systems Covered by National Consensus Standards. Hydrostatic Strengths and Suggested Pressure Ratings for CPVC 4120 at Various Temperatures, Bulletin number 2-80. Indent Marking, Bulletin number 5-80. Noise in Piping, Bulletin number 7-82. Plastic Pipe in Fire Resistive Construction, published July 1985. Plumbers' Installation Handbook. Position on the Use ofSolvent Cementsfor Transition Joints between ABS and PVC Nonpressure Piping Com ponents, Bulletin number 12-85. Pressure Rating ofPVC Plastic Pipingfor Water at Elevated Temperatures, Bulletin number 3-80. Thawing Thermoplastic Water Pipes, Bulletin number 10-83. Thermoplastic Piping in Residential Fire Sprinkler Systems, Bulletin number 9-83. Use ofBanded Flexible Connectors in DWV Systems as a Transition Between Iron Spigot and Plastic Spigots, Bulletin number 11-84. Note: PPFA also offers audio/visual programs on the following topics: Joining and Adapting Plastic Pipe, Installing Plastic Sewer Pipe, Installing Plastic DWV Piping. From the Vinyl Institute, 155 Route 46 West, Wayne Interchange Plaza It Wayne, NJ. 07470. (201) 890-9299. PVC Drain, Waste and Vent Pipe vs. Cast Iron Soil Pipe: A Cost/Benefit Comparison (executive summary), 1990. PVC vs. Copper Domestic Hot and Cold Water Systems: A Cost/Benefit Comparison (executive summary), 1990. PVC Electrical Non-Metallic Tubing vs. Electrical Metallic Tubing: A Cost/Benefit Comparison (executive summary), 1990. CTL029409 limed May 1990 PVC Pipe--Design and Installation, manual of water supply practices published in 1980. Publication number AWWANo. M23. From Uni-Bell PVC Pipe Association, 2655 Villa Creek Drive, Suite 155, Dallas, TX 75234. (214) 243-3902: Information related to water distribution systems: External Corrosion of Underground Water Distribution Piping Systems, UNI-PUB-7 (14 pages). Grounding, Locating and Thawing Proceduresfor Water Mains and Services, UNI-TR-2 (10 pages). PVC Pipe -- Technology Serving the Water Industry, UNI-PUB-3 (15 pages). Recommended Practicefor the Direct Tapping of Polyvinyl Chloride (PVC) Pressure Water Pipe, UNI-B-8 (4 pages). Recommended Practicefor the Installation ofPolyvinyl Chloride (PVC) Pressure Pipe, UNI-B-3 (7 pages). Recommended Standard Performance Specificationsfor Joint Restraint Devicesfor Use with Polyvinyl Chloride (PVC) Pipe, UNI-B-13 (4 pages). Recommended Standard Specification for Fiberglass Overwrapped Polyvinyl Chloride (PVC) Pressure Fittings, UNI-B-14 (12 pages). Recommended Standard Specification for Polyvinyl Chloride (PVC) Pressure Fittings, UNI-B-12 (12 pages). Recommended Standard Specification for Polyvinyl Chloride (PVC) Water Transmission Pipe (Nominal Diameters 14-36 Inches), UNI-B-11 (20 pages). Tapping Guidefor PVC Pressure Pipe. UNI-PUB-8 (20 pages). Information related to waste water banding: Deflection: The Pipe/Soil Mechanism, UNI-TR-1 (34 pages). Installation Guidefor PVC Sewer Pipe, UNI-PUB-6 (28 pages). Maintenance ofPVC Sewer Pipe, UNI-TR-3 (14 pages). Recommended Performance Specificationfor Polyvinyl Chloride (PVC) Profile Wall Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter (Nominal Pipe Sizes 4-48 inches), UNI-B-9 (8 pages). Recommended Practicefor the Installation of Polyvinyl Chloride (PVC) Sewer Pipe, UNI-B-5 (16 pages). Recommended Practicefor Low-Pressure Air Testing of Installed Sewer Pipe, UNI-B-6 (14 pages). Recommended Standard Specification for Type PS46 Polyvinyl Chloride (PVC) Plastic Gravity Sewer Pipe and Fittings (Based on Performance Requirements) (Nominal Diameters 4-15 inches), UNI-B-10 (4 pages). Additional information: The Effects of Ultraviolet Aging on PVC Pipe, UNI-TR-5 (12 pages). Handbook ofPVC Pipe: Design and Constuction, second edition (377 pages). Recommended Standard Specification for Thermoplastic Pipe Joints, Pressure and Non-Pressure Applications, UNI-B-l (4 pages). Technology Serving the Water and Sewer Industries, UNI-PUB-1 (4 pages). From tlw Plastics Pipo Institute (PPI), 155 Rout* 46 West, Wayiw Intordiango Plaza H, Wayno, MJ 07470. (201) 812-9076 Policies and Proceduresfor Developing Recommended Hydrostatic Design Stressesfor Thermoplastic Pipe Materials, Report number TR3. Poly (Vinyl Chloride) (PVC) Plastic Piping Design and Installation, Report number TR13. Recommended Hydrostatic Strengths and Design Stresses for Thermoplastic Pipe and Fittings Compounds, Report number TR4. CTL029410