Document X7pObqOMy2ZL1vv52982x2Z1J
GEORGIA PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
December 1, 1976
TO:
Mr-*--MA~-P&Imowski------ Chicago^
Mr-.-O-."~FT' Fowler- Mariotta Mr-. E. i_i. Aasen rortrietna Mi J Vd.ll -- , rUl' LlcUiU 'l^kJ 11 J_> --iJlAUH-'- rux uianu"' Mr-,--J-r- B-- Modo - Wilmington
Mr .-.-A,--J-.--Potra-Mno-----Wilmingtotr-
-Mrv-ei-Wr-
Tigard Lata*-
Enclosed please find the following Chicago, Illinois, Plant Formula revisions:
C-903 C-923 C-953 C-970
C-973 C-97S
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND ALL PURPOSE JOINT COMPOUND READY MIX FILLER READY MIX FILLER READY MIX FILLER
REVISED REVISED REVISED REVISED REVISED REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-903 C-923
C-953 C-970
C-973 C-97S
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND ALL PURPOSE JOINT COMPOUND READY MIX FILLER
READY MIX FILLER READY MIX FILLER
REVISED REVISED
REVISED REVISED
REVISED REVISED
SIGNED
WNG 12/1/76
tu-
((
PLANT
DATE / 7, -/ y-T#
SGP 0017169
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
January 19, 1977
TO:
Mr-;--M.--A. Pal-rooMskJ_^_ChicagoMt. G.~F. Fowler-- Hari-e-t-t-e Mr. E. L. Aabuu - Portland -Mst K. L. Dixon - Portland -fTr. J. Van - Ptnrfci&nd Jdr- A. J. Pohraline------Wiiffttn^torr Mr. J B- Moss - WilminKLotr; -Mtrr-C. -W. Let Tigard Lab*--^
Please find enclosed the following Chicago, Illinois Plant Formula revisions:
C-903 C-923 C-933 C-953 C-970 C-973 C-974 C-976 C-978 C-979
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS) READY MIX FILLER READY MIX JOINT COMPOUND (HAND TOOLS)
REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM TAB
C-903 C-923
C-933 C-953 C-970 C-973 C-974 C-976 C-978 C-979
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND
TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS) READY MIX FILLER READY MIX JOINT COMPOUND (HAND TOOLS)
REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED
SIGNED jd WNG
_____
PLANT
DATE t-X(~ ;
SGP 0017170
GEORGIA PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
May 7, 1975
TO:______ Mr'r M. A. Palmo'wski~'=~Chicago Mr-- Gv* F-s--Fowler-----Marietta. Mm ____ Ms,--R,--L-.--Dixon----P rtl-arid Mr,--J-.--Vam----Pri-Ia n d -Mtt--A-.--d-r~Pet-rai-ine----WiLmington -Mr,--J,--B-. Mo-ss------Wi44Ri-rLgtnn MTirgva-Grdt- WLva- Lbe^hTMrrerltsrC----^Ti*ga^rd
Enclosed please find the following Chicago, Illinois, plant formulas:
C-903 C-923
C-933 C-953
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND
TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND
REVISED . NEW
REVISED NEW
Please cancel the following Chicago, Illinois, plant formulas byremoving them from your formula books;
C-904 C-922
C-935 C-950
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND
CANCELLED CANCELLED CANCELLED CANCELLED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-Q03 C-923 C-933
C-953 C-904 C-922
C-935 C-950
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND
REVISED NEW REVISED NEW
CANCELLED CANCELLED
CANCELLED CANCELLED
SIGNED WNG
PLANT
DATE S
//
SGP 0017171
September 24, 1980 Supersedes Formula V-972 dated 9/23/80'
MILFORD, VIRGINIA, PLANT FORMULA READY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
Pyrophylite-SK Limestone Methocel 240 / Proxel CRL Aqua-Fil K-8 C-9-136 Starch DuPont JCM Water *
Function
RM Spec
Bulking Agent Filler Water Retention Preservative Bulking Agent Adhesive Adhesive Solvent
1 13 163 --
229 10
185
Percent
7.284 83.620
.340 .112 3.448 .874 4.322
Lbs/Batch
150.00 1722.00
7.00
2.31 71.00 18.00 89.00 1023.69
(10.0 gal) (124 gal)
100.000
3083.00. **
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at 62 lbs/p^il.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order: 1) Water/PMA-30 2) JCM 3) Filler 4) Mix until Rieady Mix is smooth - pumping
viscosity should be 520 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (520 + 20) pH
For machine tools, add 4 gallons H_0
(470 + 20).
*
Minimum - 8.0
Maximum - 9.0 (24 hrs)
-/ denotes change BGR;p
Continued on Page 2 ...........................
SGP 0017587
SGP 0017576
M ILFORD FORMULA #972 ASBESTOS CONTAINING PRODUCTS
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
TO: -Mr-r--M. k, -PaRmowskl -"Ctrl'Cago -Mr --EM--Lr--A-a s e n---Port Land" -Ms-;--R----h~.--Di xe tv----P-er-trLand-- -Mn--3~.--Van----Por-t-l-a rtd-- "MTr"A. J . Pe tral'tne---WLimington
-Mr-r-D-. C. -Corkirll--* Portland
Mra-G.--F. Fnw 1 er~~=~Marietta
Tigard
THIS c&?' rw`v
September 2, 1977
Enclosed please find the following Chicago Illinois, Plant Formula revisions and cancellations:
C-903 C-923 C-953 C-934 C-952 C-978
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND ALL PURPOSE JOINT COMPOUND TOPPING COMPOUND ALL PURPOSE COMPOUND READY MIX FILLER
REVISED REVISED REVISED CANCEL CANCEL REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-903 C-923 C-953 C-934 C-952
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND ALL PURPOSE JOINT COMPOUND TOPPING COMPOUND ALL PURPOSE COMPOUND
PLANT
REVISED REVISED REVISED CANCEL CANCEL REVISED
SGP 0017172
GEORGIA PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
December 2, 1975
TO:
Mr ~ M; At; Paimows'kl - Chica-geMr-;----Fl Fowler -* Mar4etba Mr-r"E^ L'." "AS:sen~'",Pox'tlaml -Mr."J. Vari_='PortlandMe, -Rs--Di'xon - Pur Hand -frs--U-:--B.- Mods------Wilmington Mr-r A-.--J. PetraJLinft - ..Wilmington Mi . C. W. Lehnert - ^'ligarcl Tigard Lah^-TM*00'***
;
Enclosed please find the following Chicago, Illinois, Plant Fortnula revisions:
C-903 C-923 C-933 C-953
TRIPLE DUTY JOINT BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT
COMPOUND COMPOUND
REVISED REVISED REVISED REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-903 C-923
C-933 C-953
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND
REVISED REVISED
REVISED REVISED
SIGNED_ WNG
PLANT
DATE
iwiumuuio
SGP 0017173
GEORGIA PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
September 5, 1975
TO:
Ml'. M.~A~:--Pyrhrm^w&k--) - Ch-w'.a.gft -My-. 0. -F. FowI^e^- Marietta Mr-r-Er- frr Aasen--------Por-tlaiid Mr-i--Jt--
Mr. P.,
Mr*---/Un-~.T __ TH 1 m-i n rrf nr.
ni #--err' i?
---- mxxiuiiigwii
-Mr . -0-. -frifc Lefinert - TfasardTigard Lab^-- THIS COPY WP
Enclosed please find the following Chicago, Illinois, plant formula revisions:
C-903 C-933 C-953
TRIPLE DUTY JOINT COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND
REVISED REVISED REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-903 C-933
C-953
TRIPLE DUTY JOINT COMPOUND TOPPING COMPOUND ALL PURPOSE.JOINT COMPOUND
//A A SIGNED
WNG
a/
PLANT
REVISED REVISED REVISED
p/ / <//-- DATE // / A
<r
SGP 0017174
1
CLOSED
TO:
GEORGIA-PACIFIC CORPORATION Gypsum Division Tigard, Oregon
t
October 1, 1981
Mr. Pat -Hvirigpin-s-----Portin-nd Mr-:--3-.--Mi--Herndon------ Portland
Ct-W. Lehnert - Tigard
PLEASE CANCEL THE FOLLOWING CHICAGO, ILLINOIS PLANT FORMULAS:
C-903, C-904 C-933 C-934 C-970 C-971 C-972
C-923, C-953 Vinyl Joint Compounds Triple Duty Joint Compound Topping Compound Topping Compound Ready Mix Topping Compound (Hand Tools) Ready Mix Filler Ready Mix Joint Compound
Please_sign and_return t.he_attached_tear_sheet_to_the_Tigard_Lab_1
TO: TIGARD GYPSUM LAB Tigard, Oregon
(Plant Formula)
C-903, C-904 C-933 C-934 C-970 C-971 C-972
C-923, C-953 Vinyl Joint Compounds Triple Duty Joint Compound Topping Compound Topping Compound Ready Mix Topping Compound (Hand Ready Mix Filler Ready Mix Joint Compound
Tools)
SGP 0017175
January 18, 1980 Supersedes Formula
Dated: 9/11/79
C-903,
C-923, C-953
CHICAGO, ILLINOIS, PLANT FORMULA VINYL JOINT COMPOUNDS C-903, C-923, C-953
DESCRIPTION OF PRODUCT
- Multi-purpose compound for taping, finishing, spotting nailheads and texturing.
FORMULA
Raw Mater: al
Natrosol 250 HXR Vanicide Gelvatol f000 Englehart X-1927 Mica p80-H / Limestone * Hamico 267 / Sorbitol (powdered) k Celite 266
Function
Thickener Fungicide Adhesive Fiber Filler Anticracking Agent Filler Adhesive Borax Stabilizer Body Builder
RM Spec Percent
170 .450 126 .045 162 1.485
3.375 11 13.501 13 77.004 23 .450
.315 3.375
100.000
Lbs/Batch
20 2
66 150 600 3422
20 14
150
4444
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35.
After compound has dried, tape shall delam inate when peeled back.
CRACK RESISTANCE
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
White or yellow ***
Dried compound shall not vary in color from preceding batches.
* Staley 113-105 may be substituted at an equal loading. ** For yellow compound, add 4 lbs. yellow oxide per batch. *** Celatorn MW 27 may be substituted at an equal loading.
-/ denotes change
HCF:ps
SGP 0017176
September 11, 1979
NEW
CHICAGO, ILLINOIS, PLANT FORMULA VINYL JOINT COMPOUNDS C-903, C-923, C-953
DESCRIPTION OF PRODUCT
- Multi-purpose compound for taping, finishing, spotting nailheads and texturing.
FORMULA
Raw Material
Natrosol 250 HXR Vanicide Gelvatol 6000 Englehart X-1927 Mica p80-H Limestone * Hamico 267 Sorbitol (powdered) ** Celite 266
Function
Thickener Fungicide Adhesive Fiber Filler Anticracking Agent Filler Adhesive Borax Stabilizer Body Builder
RM Spec Percent
170 .450 126 .045 162 1.485
3.375 11 13.501 13 77.139 23 .450
.180 3.375
100.000
Lbs/Batch
20 2
66 150 600 3428
20 8
150
4444
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35.
After compound has dried, tape shall delam inate when peeled back.
CRACK RESISTANCE
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
White or yellow ***
Dried compound shall not vary in color from preceding batches.
* Staley 113-105 may be substituted at an equal loading. *** For yellow compound, add 4 lbs. yellow oxide per batch.
** Celatom MW 27 may be substituted at an equal loading.
-/ denotes change
SGP 0017177
January 18, 1980 Supersedes Formula. ,C-903,
Dated: 9/11/79
C-923, C-953
CHICAGO, ILLINOIS, PLANT FORMULA VINYL JOINT COMPOUNDS C-903, C-923, C-953
DESCRIPTION OF PRODUCT
- Multi-purpose compound for taping, finishing, spotting nailheads and texturing.
FORMULA
Raw Material
Natrosol 250 HXR Vanicide Gelvatol 6000 Englehart X-1927 Mica p80-H / Limestone * Hamico 267 / Sorbitol (powdered) * Celite 266
Function
Thickener Fungicide Adhesive Fiber Filler Anticracking Agent Filler Adhesive Borax Stabilizer Body Builder
RM Spec Percent
170 .450 126 .045 162 1.485
3.375 11 13.501 13 77.004 23 .450
.315 3.375
100.000
Lbs/Batch
20 2
66 150 600 3422
20 14 150
4444
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35.
After compound has dried, tape shall delam inate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
- White or yellow ***
Dried compound shall not vary in color from preceding batches.
* Staley 113-105 may be substituted at an equal loading. ** For yellow compound, add 4 lbs. yellow oxide per batch, *** Celatom MW 27 may be substituted at an equal loading.
-/ denotes change
HCF:ps
SGP 0017178
September 11, 1979
NEW
CHICAGO, ILLINOIS, PLANT FORMULA VINYL JOINT COMPOUNDS C-903, C-923, C-953
DESCRIPTION OF PRODUCT
- Multi-purpose compound for taping, finishing, spotting nailheads and texturing.
FORMULA
Raw Material
Natrosol 250 HXR Vanicide Gelvatol 6000 Englehart X-1927 Mica p80-H Limestone Hamico 267 Sorbitol (powdered) Celite 266
^unction
Thickener Fungicide Adhesive Fiber Filler Anticracking Agent Filler Adhesive Borax Stabilizer Body Builder
RM Spec Percent
170 .450 126 .045 162 1.485
3.375 11 13.501 13 77.139 23 .450
.180 3.375
100.000
Lbs/Batch
20 2
66 150 600 3428
20 8
150
4444
WORKING CONSISTENCY Specifications
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35.
After compound has dried, tape shall delam inate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
- White or yellow ***
Dried compound shall not vary in color from preceding batches.
* Staley 113-105 may be substituted at an equal loading. *** For yellow compound, add 4 lbs. yellow oxide per batch.
** Celatom MW 27 may be substituted at an equal loading.
-/ denotes change
SGP 0017179
December 8, 1967 NEW FORMULA
CHICAGO, ILLINOIS PLANT FORMULA ALL PURPOSE COMPOUND C-953
DESCRIPTION OF PRODUCT - White multi-purpose Compound for taping, finishing, spotting nail'neads and texturing.
FORMULA Raw Materials
Source
R.M. Soec.
Vancide 51Z Petro - AD Natrosol 250 HXR
(Fine Grind) . " Zinc Oxide Soda Ash Borax (Powdered) Casein 100 M Asbestos 7RF9 Mica P80H Nalco 71-D5 Limestone
R. T. Vanderbilt Co The Thornley Co.
Hercules Powder Co. Mallinkrodt Co. Open Market Riverside Chem. Co. International Casein Co. Phillip Carey Western Mica Co. Nalco Chemical Co. Th oms on-Weinrnan
126 3
170 119
32
10 9
11
13
Percent
0.075 0.100
0.300 0.100 0.4,,0 0.150 4.5CC 5.500 16.000 0.025 72.850 100.000
Lbs./Batch
3.0 4.0
12.0 4.0
16.0 6.0
180.0 220.0 640.0
1.0 2914.0 4000.0
WORKING CONSISTENCY Specifications:
Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Aver-,e
72 66 6^
ALKALINITY pH Specifications:
Refer to Plant Testing Procedure No. 34.
Maximum
M in imum
Av c r - -2 e
9.2 S. 8 9.o
Minimum soda ash content - 0.4007.
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
CRACK RESISTANCE Specifications:
Refer to Plant Testing procedure No. 35. After compound has dried, tape snail delaminate when peeled back.
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
Dried compound should be a neutral color and match the standard sample.
kkt SGP 0017180
February 16, 1968
Supersedes Formula No. C-953 Dated 12/8/67
CHICAGO, ILLINOIS PLANT FORMULA ALL PURPOSE COMPOUND C-953
DESCRIPTION OF PRODUCT - White multi-purposes compound for taping, finishing, spotting nailheads and texturing.
FORMULA Raw Materials
Func tion
R.M. Spec.
Percent
Lbs./Bat<
Vancide 51Z Pctro AD Natrosol 250 HXR Zinc Oxide XX-2 Soda Ash Borax Casein 100 M Asbestos 7RF-9 Mica P80 H Nalco 71-D5 Limestone
Fungicide > Wetting Agent Water Retention Viscosity Stabilizer Alkaline Source Alkaline Source Adhesive Bulk Anti Cracking Agent Anti Foaming Agent Filler
126 143 170 119
32 37 10
9 11 -
13
0.075 0.100 0.300 0.100 0.400 0.150 4.500 5.500 16.000 0.025 72.850 100.000
3.0 4.0
12.0 4.0
16.0 6.0
180.0 220.0 640.0
1.0 2914.0 4000.0
WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32J'
Specifications:
Maximum
Minimum
Average
67 63 65
ALKALINITY pH Specifications:
Rerer to Plant Testing Procedure No. 34.
Maximum
Minimum
Average
9.2 8.8 9.0
Minimum soda ash content - 0.40%
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE Specifications:
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
Dried compound should be a neutral color and match the standard sample.
-/ Denotes change in this reissue.. RRBrkkt
SGP 0017181
'ji n o
April 23, 1971 Supersedes Formula C-953 Dated 4/15/71
-/ ALL PURPOSE JOINT COMPOUND C-953
IT - White ;v.ulci-puroos e compound for taping, nr. spotting nailheads and texturing.
I'unc t i on
R.K. Snec.
Pore ::
tch
v' a v*. c i v- a c ~ 4 ivtro AD Ratrosol 250 KRR Line Oxide XX-2
oda Ash ore:-;
Ashmens 7RF-9
Fungicide Wetting Agent Water Retention Viscosity Stabilizer Alicdme Source Alkaline Source Adhesive auik Ar.ti Cracking Agent Ar.ti Foaming Agent piiler
126 143 170 119
32 37 10
9
11
196
13
C.075 0.1C0 0.360 G. * 0 0 0.400 0.150 4.500
.* ./ _/
.G Owo
0. ole
7 Cl 2> yj
rGOGCG
^0 4.0 12. G 4.0 ' 16.0 6.0 130. G
>. u .. 0
-.0 *tOuG U
:STE>*CV : tions:
- .-Refer to Plant Testing Procedure No. 32."
P.a >: inurr.
.'.mimum
Averare'
67 63 65
; k. - - - - : icr.s:
.-naaer to Plant Tester Procedure Ro. 34.
Minimum
Averare
9.2 8.6
..mi...urn *cca as a content ** u.4u4
.. . - VVWWRTmS
^.. --*
~ -.
Refer to Plant Testing Procedure Ro. 33.
Wet mix shall 'be plastic and buttery workir.~
grit or coarse particles.
~
Jv.'. . WO
Z7\2Z2S
*. zc. r. c v or*. s
- R.efer to Plant Testing Procedure Ro. 35.
.
.After compound **ss erred, cepe snell c r err. me ta \5.ver. sealed
back.
.......*3 r- - .r. cecions:
There shall be at most only a couple of vary srr.e__ creeks in the wedge.
- -. -.c i ': :::icr.s :
Dried comoour.d should be a neutral color and rr. c c c n c a 2
standard sampl e.
/ /
CA2.IK
s reissue.
SGP 0017182
January 15, 1973 Chicago Formula #C-953 Reissued
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - Multi-purpose compound for taping, finishing, spotting nailheads and texturing.
FORMULA
Raw Materials
Source
RM Spec, Percent Lbs/Batch
Vancide 51Z Petro-AD Natrosol 250 HXR
(Fine grind) Zinc Oxide Soda Ash Borax (Powdered) Casein 100 M Asbestos 7RF9 Mica P80H Defoamer Mill Limestone
Fungicide Wetting Agent
126 143
Water retention Viscosity stabilizer Alkaline source Alkaline source Adhesive Bulking agent Anti-cracking agent Anti-foaming agent Filler
170 119
32
10 9
11 196
13
0.075 0.100
3.0 4.0
0.300 0.100 0.400 0.150 4.500 5.500 16.000 0.025 72.850 100.000
12.0 4.0
16.0 6.0
180.0 220.0 640.0
1.0 2914.0 4000.0
WORKING CONSISTENCY Specifications:
- Refer to Plant Testing Procedure No. 32.'
Maximum
Minimum
Average
72 66 69
ALKALINITY
- Refer to Plant Testing Procedure No. 34.
pH Specifications :
Maximum
Minimum
Average
9.2 8.8 9.0
Minimum soda ash content - 0.40%
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plast Lc and buttery working and free ot grit or coarse particles.
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE Specifications:
There shall be at most only a couple of very small cracks in the wedge'
COLOR Specifications:
Dried compound should be a neutral color and match the standard sample.
NOTE: For yellow compound, add 4 lbs. of yellow oxide 2087 perlite.
EDO:elz
SGP 0017183
August 9, 1974 Supersedes; Chicago Formula #C-953
Dated 1/15/74
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - Multi-purpose compound for taping, finishing, spotting nailheads and texturing.
FORMULA
Ra* Materials
Vancide 51Z Petro-AD
; jthocel 228 ,, 7 '.nc Oxide i 'da Ash I.orax (Powdered) Casein 100 M Asbestos 7RF9 Mica P80H Defoamer Mill Limestone
Source
RM Spec. Percent Lbs/Ba1
Fungicide Wetting.Agent
126
0.075
3.0
143
0.100
4.0
Water retention Viscosity stabilizer Alkaline source Alkaline source Adhesive Bulking agent Anti-cracking agent Anti-foaming agent Filler
170 119
32
10 9
11 196
13
0.300 0.100 0.400 C.150 4.500 5.500 16.000 0.025 72.850 100.000
12.0 4.0
16.0 6.0
180.0 220.0 640.0
1.0 2914.0 4000.0
WORKING CONSISTENCY Specifications:
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
72 66 69
ALKALINITY
- Refer to Plant Testing Procedure No. 34.
pH Specifications:
Maximum
Minimum
Average
9.2 8.8 9,.0
Minimum soda ash content - 0.40%
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free ot grit or coarse particles.
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE Specifications:
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
Dried compound should be a neutral color and match the standard sample.
NOTE: For yellow compound, add 4 lbs. of yellow oxide 2087 perl-i-te.
WNG:elz
-/ denotes change
SGP 0017184
May 7, 1975 Formula C-953 NEV7
CHICAGO. ILLINOIS, FLINT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION 0? PRODUCT
All purpose compound for taping, and spotting, railheads.
FORMULA Kav; internal
Function
RM Sue c percent Ids/ra
Natrosol 150 HXR, Vanicide Gelvatol i 'iDO Attagel AO i'iIlCs pSO-H Limestone
Kamico 267
Thickener Fungicide Adhesive Fiber filler Anticracking agent Filler
Adhesive
170 126 162
9 11
13 23
c> 1.10 ~~r O -"4- O v-7v_/ ol.Ll
1.C0
20 2
t r\
160 ISC S2
AO
100.00
A000
WORKING CONSISTENCY
- Refer to Plant-Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Averar
60 55
'FORKING PROPERTIES Specifications:
BONDING PROPERTIES ctogcgigc v'ci.cr.iS;
- Refer to Plant Test ing Procedure No. Wet mix shall be pi. 3~LtZ- C and outtery v:or.ciri r and free of grit or cc&r SB pS.l""C iC,,GS
- Refer to Plant Test ing procedure No. / > After compound has dried j ocs S ^ h. c. --. arr.i.j when peeled back.
CRACK RESISTANCE
- There shall be at most 0 nl3r a couple cf ver"
tc*. u u.
+-J -- 3 G 0
'L'_< ^
c. ~ _L J_ /10 c vc-
o&ucr*;*
* For yellow compound, add A lbs. yellow oxide per batch.
OgTV r>
SGP 0017185
sc p! </, ' T/-J
May-7-;--1975 Formula C-953
'NEW "p r,
y//'75'
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
Natrosol 250 HXR Vanicide Gelvatol 6000 Attagel 40 Mica pSO-H Limestone Hamico 26?
Function
RM Suec Percent
Thickener Fungicide Adhesive Fiber filler
Antieraeking agent Filler Adhesive
170 126 162
9 11
13 23
va.il
.50
.05 1.00 4.00 1-2-rOO Sdrr45 1.00
Lbs/Batch
20 2
40 160 460 >2-58 z,**'
40
100.00
4000
WORKING CONSISTENCY
- Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
-60- 67
Minimum
Average 5S-66
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of. grit or coarse particles.
BONDING PROPERTIES Specifications':
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate
when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
- White or yellow*
Dried compound shall not vary in color from preceding batches.
* For yellow compound, add 4 lbs. yellow oxide per batch.
WNG:jg
SGP 0017186
'September 4, 1975 Supersedes Formula C-953 Dated 5/7/75
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
Function
RM Spec Percent Lbs/Batch
Natrosol 250 HXR Vanicide Gelvatol 6000 Attagel 40 -/ Mica p80-H -/ Limestone
Hamico 267
Thickener Fungicide Adhesive Fiber filler Anticracking agent Filler Adhesive
170 126 162
9 11
13 23
.50 .05 1.00 4.00
21.25 72.20
1.00
20 2
40 160
850 2888
40
100.00
4000
WORKING CONSISTENCY
- Refer to Plant Testing Procedure No.' 32.
Specifications:
Maximum
Minimum
Average
*/
WORKING PROPERTIES Specifications:
67 63 65
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate
when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
- White or yellow* Dried compound shall not vary in color from preceding batches.
* For yellow compound, add 4 lbs. yellow oxide per batch.
WNG:jg
/ denotes change
SGP 0017187
' s." I I '
September-4, 1975 Supersedes Formula C-953
Dated 5/?/?5"
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
Function
RM Spec Percent Lbs/Batch
Natrosol 250 HXR Vanicide
Gelvatol 6000 Attagel 40
-/ Mica p80-H -/ Limestone
Hamico 26? .
.r ;
Thickener Fungicide Adhesive
Fiber filler
Anticracking agent Filler Adhesive f. *
170 126 162
9 11
13 23
.50 .05 1.00 4.00
21.25 -7 'XyC 72-S-29-
1.00
.# -fc,
~ T00700--
20 2
40 160 850 2888 i,..
40
4000
WORKING CONSISTENCY
- Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
-/ 67 63 65
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
- White or yellow*
Dried compound shall not vary in color from preceding batches.
* For yellow compound, add 4 lbs. yellow oxide per batch.
WNG:jg
-/ denotes change
SGP 0017188
December 1, 1975
Supersedes Formula C-953 Dated 9/4/75
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
Function
RM Spec Percent Lbs/Batch
Natrosol 250 HXRVanicide Gelvatol 6000 Attagel 40
Mica p80-H -/ Limestone
Hamico 267
-/ Sorbitol (Powdered)
Thickener Fungicide Adhesive Fiber filler
Anticracking agent Filler Adhesive
Borax Stabilizer
170 126 162
9 11
13 23
.50 .05 1.00 4.00
21.25
72.0
1.00
.2
100.00
20 2
40 160
850
2880
40
8
4000
WORKING CONSISTENCY
Refer to Plant' Testing ]Procedure No. 32
Specifications:
Maximum
Minimum
Averaee
WORKING PROPERTIES Specifications:
67 63
65
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
- White or yellow* Dried compound shall not vary in color from preceding batches.
* For yellow compound, add 4 lbs. yellow oxide per batch.
WNG: j g
-/ denotes change
SGP 0017189
NoveniDer 2o,- 1-976 Supersedes Formula C-953 Dated: 12/1-/75-
wlzznb
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping. finishing. and spotting nailheads.
FORMULA Raw Material
>/' oo /Tjj Natrosol 250 H3CR Vanicide Gelvatol 6000 Attagel 40 Mica p80-H Limestone Hamico 267 Sorbitol (Powdered)
Function
V'.J--- <--0 Thickener Fungicide Adhesive
Fiber filler Anticracking agent Filler Adhesive Borax Stabilizer
RM Spec
Percent
\Zb 170
.OH'-' .450
126 .045
162 .990
9 3.600 11 19.127 13 74.6'?74-r708-
23 .900 - .180
Lbs/Batch
20 2
44 160 850 3320 40
8
3-? i
100.000
4444
WORKING CONSISTENCY
Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
CRACK RESISTANCE
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
White or yellow* Dried compound shall not vary in color from preceding batches.
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG/gvp -/ denotes change
SGP 0017190
November 23, 1976 Supersedes Formula C-953 Dated: 12/1/75
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
/ FORMULA Raw Material
Function
RM Spec
Percent
Lbs/Batch
Natrosol 250 HXR Vanicide Gelvatol 6000 Attagel 40 Mica p80-H Limestone Hamico 267 Sorbitol (Powdered)
Thickener Fungicide Adhesive Fiber filler Antieraeking agent Filler Adhesive Borax Stabilizer
170
.450
20
126
.045
2
162
.990
44
9
3.600
160
11
19.127
850
13
74.708
3320
23
.900
40
-
.180
8
100.000
4444
WORKING CONSISTENCY
- Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tap's shall delaminate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
- White or yellow* Dried compound shall not vary in color from preceding batches.
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG/gvp -/ denotes change
SGP 0017191
Ta o vo . ' -
December -1* 1976
Supersedes Formula C-953
Dated: 11/23/76
\ /
..
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
4?T Petro ,.D
Natrosol 250 HXR Vanicide
Gelvatol 6000 --/ At-feage --40--.
Mica p:0-H --/ Limestc ne
Hamico 267 Sorbitol (Powdered)
Function
Dispersant
Thickener Fungicide Adhesive V(s. Fiber filler Anticracking agent Filler Adhesive Borax Stabilizer
RM Spec
Percent
126
170
S3
126 .045
162 .990
-9r5", U21, 3t600
11 19.127
13 ?!, }-'? 2-7*1^618
23 .900
- .180
Lbs/Batch
L 20
2
44
160-
?
850
23-16
40 8
-a X
100.000
4444
WORKING CONSISTENCY
Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
White or yellow* Dried compound shall not vary in color from preceding batches.
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG/^-r -/ denotes change
SGP 0017192
December 1, 1976
Supersedes Formula C-953
Dated: 11/23/76
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
-/ i'etro AD
Natrosol 250 HXR Vanicide Gelvatol 6000 Attagel 40 Mica p80-H --/ Limestone
Hamico 267 Sorbitol (Powdered)
Function
Dispersant
Thickener Fungicide Adhesive Fiber filler Antieraeking agent Filler Adhesive Borax Stabilizer
RM Spec
126
170 126 162
9 11 13 23
Percent
m
.045 .990 3.600 19.127
74.618
.900 .180
Lbs/Batch
4 20
2 44 160 850
3316
40 8
100.000
4444
WORKING CON' S>ISTENCY Specifications:
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specificat:ons:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delamii.ate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
White or yellow* Dried compound shall not vary in color from preceding batches.
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG/jg -/ denotes change
SGP 0017193
January 10, 1977 , Supersedes Formula C-953 Dated: 12/1/76
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping. finishing, and spotting nailheads.
FORMULA Raw Material Petro AL)
Natrosol 250 HXR Vanicide Gelvatol 6000 / Minugel FG
Mica p80-H Limestone Hamico 267 Sorbitol (Powdered)
Function
Dispersant Thickener Fungicide Adhesive Fiber filler Anticracking agent Filler Adhesive Borax Stabilizer
RM Spec
126
170 126 162
11 13 23
-
Percent
m
.045 .990 5.626 19.127 72.592 .900 .180
Lbs/Batch
U
20 2
44
250 850
3226 40 8
100.000
4444
WORKING CONSISTENCY Specifications:
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING "PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate, when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications
- White or yellow* Dried compound shall not vary in color from preceding batches.
*For yellow compound, add 4 lbs. yellow oxide per batch.
WNG/gp -/ denotes change
SGP 0017194
Supersedes Formula C-953
Dated:
6-
/ J 'C/-7 7
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material -^et-rcr AJJ
Natrosol 250 HXR Vanicide Gelvatol 6000 . , . . / Minugel- FG ` '
Mica p80-H Limestone )' Hamico 267 Sorbitol (Powdered)
\
Function
Bispersafrt Thickener Fungicide Adhesive Fiber filler Anticracking agent Filler Adhesive Borax Stabilizer
RM Spec
Percent
3r26---- 170
126 .045 162 | .HS'S" r990-
'i, . 7A>S'-5-r626 11 H9-.-127-
13 77.1 J*?' 72t592 23 .-900 - . ..180
100.000
Lbs/Batch
-L20
2
44-- <--0
250- :
850- (-r<s
3226-
i
. . 8 . ..
4444
WORKING CONSISTENCY
Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when
peeled back.
CRACK RESISTANCE
There shall be at most only a couple of very small cracks in the wedge.
COLOR
White or yellow*
'
Specifications:
Dried compound shall not vary in color from
preceding batches.
Ur 1 "L < f.
n - ,-j
l'*For yellow compound, add 4 lbs. yellow oxide per batch.
' ,
( ii L1
4 "7 4/. i i `V
t.
"1 ^ >
; / ,' v < t ' A
WNG/gp
>
-/ denotes change
SGP 0017195
Supersedes Formula C-953 Dated: 1/10/77
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
Function
RM Spec
Percent
Lbs/Batci
Natrosol 250 HXR Vanicide
-/ Gelvatol 6000 -/ Englehart X-1927 -/ Mica p80-H --/ Limestone
-/* Hamico 267 Sorbitol (Powdered)
-/,v'elite 266
Thickener Fungicide
Adhesive
Fiber filler Anticracking agent Filler Adhesive Borax Stabilizer Body Builder
170
.450
20
126
.045
2
162
1. 485
66
3.375
150
11
13.501
600
13
77.139
3428
23
.450
20
_
.180
8
3.375
150
100.000
4444
WORKING CONSISTENCY
Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when
peeled back.
CRACK RESISTANCE
There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
- White or yellow* Dried compound shall not vary in color from preceding batches.
* Staley 113-105 may be substituted at equal loading. *** For yellow compound, add 4 lbs. yellow oxide per batch.
**Celatom MW27 may be substituted at an equal loading.
WNG/gp -/ denotes change .
SGP 0017196
Supersedes Formula C-953 Dated: 1/10/77
CHICAGO, ILLINOIS, PLANT FORMULA ALL PURPOSE JOINT COMPOUND C-953
DESCRIPTION OF PRODUCT - All purpose compound for taping, finishing, and spotting nailheads.
FORMULA Raw Material
Function
RM Spec
Percent
Lbs/Batch
Natrosol 250 HXR Vanicide
-/ Gelvatol 6000 -/ Englehart X-1927 -/ Mica p80-H --/ Limestone -/* Hamico 267
Sorbitol (Powdered) -/*fcelite 266
Thickener Fungicide
Adhesive
Fiber filler Anticracking agent Filler Adhesive Borax Stabilizer Body Builder
170 126 162
11 13 23
_
.450 .045 1. 485 3.375 13.501 77.139 ,450
.180 3.375
100.000
20 2
66 150 600 3428
20 S
156
4444
WORKING CONSISTENCY
- Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
67 63 65
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
BONDING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE
- There shall be at most only a couple of very small cracks in the wedge.
COLOR Specifications:
- White or yellow* Dried compound shall not vary in color from preceding batches.
* Staley 113-105 may be substituted at equal loading. *** For yellow compound, add 4 lbs. yellow oxide per batch.
**Ceiatom MW27 may be substituted at an equal loading.
WNG/gp -/ denotes change
SGP 0017197
Aprii jO , 1975 Formula C-0&5--
new
2>
CHICAGO, ILLINOIS, PLANT FORMULA
ra^s-wag- joint compound c-aa. o c
r ^ '- `J- 'tt'UV
.A
DESCRIPTION OF PRODUCT - Ma1ta..-purpose compound for taping, spotting railheads rmn trortn^ing. ^hi pnffnt nn-I-r
anisring, / i-
O N O O O to O
C'l - J VO -TO u \ - J
FORMULA Raw Material
Natrosol 250 HXR Yanicide C-elvatol 6000 Attagel 40 Plica pSO-H Limestone Kamico 267
Function
RM Soec
Thickener Fungicide Adhesive Fiber Filler Anticracking agent Filler Adhesive
170 126 162
9 11
23
Percent
.50
.05 1.00 4.00 12.00 81.45 1.00
100.00
000
FORKING CONSISTENCY
- Refer to Plant Testing Procedure No. 32.
Specifications:
Maximum
Minimum
Average
FORKING PROPERTIES Specifications:
60 55 53
- Refer to Plant Testing procedure No. 33. Wet mix shall be plastic and buttery working and free of grit or coarse particles.
PONDING PROPERTIES spec i i a cat i on s:
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
] SISTANCE
- There shall be at most only a couple r small cracks in the vre: .
CC -mPh
Specifications
White or yellow*
Dried compound shall not vary in cola: preceding batches.
om
* For yellow compound, add 4 lbs. yellow oxide per batch.
WNG:3 g
SGP 0017198
SGP 0017168
CHICAGO FORMULA #953 ASBESTOS CONTAINING PRODUCTS