Document X724wMyXmXwjZgZgnQ9z1p96d
)
froduc, Supertemp Block
THE EAGLE - PICHER COMPANY INSULATION DIVISION
MANUFACTURING SPECIFICATION
PLANT PRODUCTION MUST FOLLOW THIS SPECIFICATION. Emergency Change may be made but shall be promptly reported to the Production Manager and may not estend beyond the Emer gency. Permanent'Change mutt be submitted to and be approved by the Production Manager before use by any Plant.
Plant____ Asp?**...................... ........
Pag*____ 1of. fi ..Pages _
Effidl*# November, 1950 Supanedet Spec. Dated 12/6A6
'
Ravitad Itarm Entire Form ir Contents
Prepared Bv C. E. Young
, .............. P'flfii?
Approved:
, fcj-i*Jy ?
Production Mgr.
.j
c i.i. S
Division Mor. *
I. PRODUCT DESCRIPTION
'
\/oM- ^ 'fem'se'** % fix )SXr
* _____
_____ _
(a) Eagle-Richer Supertemp Elock is a dark grey, dry, relatively dust free block composed of Eagle-Picher Mineral Wool thoroughly blended with suitable binding., agents. The finished product is semi-rigid and rec tangular in shape with square corners and parallel faces.
II. PRODUCT INFORMATION
(a) Density
(b) Service temperature ,
(c) Fire resistance
(d) Corrosion on steel
-
(e) '
Performance & 1700F, one face Volumetric shrinkage Linear shrinkage Los 6 in weight
(f) Compressive strength (10J deformation)
(g) Breaking strength (1" x 6" on 10* span)
(h) Thermal conductivity (k) in ETU in/sq.ft/hr/F ,
(i) Block Fizes Length Width Thickness
(j) Packages
, ' '
*
(k) Net Weight, per carton
22-21 lbs./cu.ft. Up to 1700F, one face Incombustible None
2% 2% 2% 18 psi
12 lbs.
0.37 2OOF K.T. 0.53 500F K.T. 0.6U 700F.M.T.
13" and 36" 6" and 12* 1* to ii* in J* increments
Cartons
66, 77, and 32.5 lbs
17 . PROCESSING (Contd)
Super^erap 31ock ` Page 3 of I4
(k) The cooled blocks are then planed and sawed to the desired dimensions.
(l) Acceptable Blocks are packed in cartons which are then closed, marked, and placed in storage or made ready for shipment. See VI-b below for quantities.
V. PRODUCT CONTROL
.
(a) Product control tests shall be conducted as often as is necessary to main
tain the quality limits set forth in the following table but with no less
frequency than indicated.
KEN. TEST
TEST
PROPERTY_______________
VALUE
FREQUENCY
_PROCED'TRE
(1) Dustiness
(2) Waterproofnes s
(3) Density Minimum Maximum
00 Breakload
l"x6" on 10" span
Relatively free , Continuous
To be determined 0.2St Production
22 lb/cu.ft. 2h lb/cu.ft.
-
12 lb. min.
0.25* Production 0.25? Production
Visual To be determined E-P I-I36a
Navy 32-1-3
(5) Dimensional Tolerance -0/3/8 inch
0.25$ Production
Visual
'
' (b) Substandard material shall be set aside for disposition as directed by j Plant Manager
VI. PACKAGING
(a) Packages shall be regular slotted cartons made from 275 lb. test stock.
(b) Fackages shall be filled in accordance with the following table:
BLOCK
-SIZE
BLOCK THICKNESS
3D. FT. PER CARTON
CARTON
SIZE
APPRO!. MIN.NET wr. PER CARTON
6" and 12" x 18" 1* li* 2, 3, li in.
36
21-1/8" x 18-1/8" x 12-1/8"
66 lbs.
6" and 12" x 19"
2j in.
US 30-1/8" x 18-1/8" x 12-1/8"
82| lbs.
6" and 12" x 18"
3^ in.
L.2 23-1/8" x 18-1/8" x 12-1/8"
77 lbs.
6" and 12" x 36" 1, lj, 2, 3, ix in. 36
12-1/8" x 12-1/8" x 36-1/8"
66 lbs.
6" and 12" x 36"
2\ in. -
1*5 15-1/8" x 12-1/3" x 36-1/8"
82* lbs.
6" and 12" x 36"
in. U2; llx-l/8" x 12-1/8" x 36-1/8" _ 77 lbs.
om>
SupertempBlock Page ii of It
frCnOIEO (Conl'd).
'
(c) Cprtons shall "be printed in accordance with X-P Tora layout D-112.
(d) Carton* *hall he closed by gluing top and bottom.
(e) All carton* shall be marked with a code number that will permit complete manufacturing identification.
(f) This product shall be identified on shipping form* a* "Mineral Vool Blocks in Cartons".