Document Vjrxq17vLrzJ9EgZd26dnJvp

DownloadSearchable PDFRandom document
NEW July 2, 1979 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-972 (HAND TOOLS) DESCRIPTION OF PRODUCT FORMULA Raw Material PMA 30 Filler M-971 DuPont JCM Nalco 71D-5 * Water - White Ready Mix Joint Compound used for taping, topping and texturing for shipments to Adobe D/W, Miami, Florida only. Function Preservative Filler Adhesive Defoamer Solvent RM Spec 185 125 Percent . 077 94.275 5.548 . 100 Lbs/Batch 1.6 1950.4 115.0 (12.9 2.0 1120.0(134.9 gal) gal) 100.000 3189.0 ** * Approximately 52 lbs/100 lbs. of active ingredients (this may vary v+ 8 gallons per batch. ** One batch yields 49+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water/Proxel 2) JCM 3) Nalco 4) Filler M-971 5' Mix until filler is dispersed. 6) Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (550 + 20) For Machine tools add 7 gallons H^O (450 + 20) PH WORKING PROPERTIES Specifications 8.0 - 9.0 - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. HCF:ps SGP 0017567 Continued on Page 2 . . BONDING PROPERTIES Specifications CRACK RESISTANCE Specifications COLOR Specifications NEW - M- 97 2 July 2, 1979 Page 2 Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90% fiber tear when delaminated. Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better. White Dried compound shall match color of standard sample. HCF:ps SGP 0017568 July 13, 1979 Supersedes Formula M-972 Dated July 2, 1979 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-972 (HAND TOOLS) DESCRIPTION OF PRODUCT FORMULA Raw Material PMA 30 Filler M-971 DuPont JCM Nalco 71D-5 * Water - White Ready Mix Joint Compound used for taping, topping and texturing for shipments to Adobe D/W, Miami, Florida only. Function Preservative Filler Adhesive Defoamer Solvent RM Spec 185 125 Percent .077 94.275 5.548 . 100 . Lbs/Batch 1.6 1950.4 115.0 (12.9 gal 2.0 969.0(116 gal) -/ 100.000 3038.0 ** * Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 49+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/' PMA-30 2) JCM 3) Nalco 4) Filler M-971 -/ 5) Mix until Ready Mix is smooth viscosity should be 550 + 20. pumping WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (550 + 20) For Machine tools add 7 gallons H20 (450 + 20) PH WORKING PROPERTIES Specifications 8.0 - 9.0 - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. HCF:ps SGP 0017569 Continued on Page 2 . . July 25, 1979 Supersedes Formula M-972 Dated July 13, 1979 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-972 (HAND TOOLS) DESCRIPTION OF PRODUCT FORMULA Raw Material PMA 30 Filler M-971 DuPont JCM Nalco 7ID-5 * Water - White Ready Mix Joint Compound used for taping, topping and texturing for shipments to Adobe D/WMiami, Florida only. Function Preservative Filler Adhesive Defoamer Solvent RM Spec 185 125 Percent . 077 94.275 5.54 8 . j 00 . Lbs/Batch 1.6 1950.4 115.0 (12.9 gal 2.0 969.0(116 gal) 100.000 3038.0 ** * Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 49+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/'PMA-30 2) JCM 3) Nalco 4) Filler M-971 5) Mix until Ready Mix is si ooth - pumping viscosity should be 550 - 20. WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (550 + 20) For Machine tools add 7 gallons H^O (450 + 20) PH 8.0 - 9.0 WORKING PROPERTIES Specifications -/ Denotes change HCF:ps - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. SGP 0017570 Continued on Page 2 . . October 30, 1979 Supersedes Formula M-972 Dated July 25, 1979 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M -972(HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing FORMULA Raw Material PMA 30 Filler M-971 DuPont JCM Nalco 71D-5 * Water Function Preservative Filler Adhesive Defoamer Solvent RM Spec 185 125 Percent .077 94.275 5.548 .100 Lbs/Batch 1.6 1950.4 115.0 (12.9 gal 2.0 969.0(116 gal) 100.000 3038.0 ** * Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 49+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/'PMA-30 2) JCM 3) Nalco 4) Filler M-971 5) Mix until Ready Mix is smooth -. pumping viscosity should be 550 + 20. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (550 + 20) For Machine tools add 7 gallons H^O (450 + 20) pH 8.0 - 9.0 WORKING PROPERTIES Specifications -/ Denotes change HCF:ps Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. SGP 0017571 Continued on Page 2 . . October 30, 1979 Supersedes Formula .M-972 Dated: July 25, 1979 Page Two BONDING PROPERTIES Specifications CRACK RESISTANCE Specifications COLOR Specifications - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90% fiber tear when delaminated. - Refer to Plant Testing Procedure No. 37. Rating.shall be 4 or better. - White Dried compound shall match color of standard sample. HCF:ps SGP 0017572 January 22, 1980 Supersedes Formula M-972 Dated 10/30/79 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-972 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing FORMULA Raw Material PMA 30 -/ Filler M-971 -/ DuPont JCM '-/ Nalco 7ID-5 * Water Function Preservative Filler Adhesive Defoamer Solvent RM Spec 185 125 Percent .074 94.532 5.302 .092 Lbs/Batch | 1.6 S 2050.4 115.0 (12.9 gal) 2.0 969.0(116 gal) -/ 100.000 3138.0 ** * Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ' -/ ** One batch yields 50+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following order: 1) Water/'PMA-30 2) JCM 3) Nalco 4) Filler M-971 5) Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20. WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. -/ Brabender: (550 + 20) For Machine tools add 4 gallons H20 (450 + 20) pH 8.0 - 9.0 WORKING PROPERTIES Specifications -/ Denotes change HCF:ps - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 . . SGP OOI7573 ! June 30, 1981 Supersedes Formula M-972 Dated 10/13/80 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-972 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing * / FORMULA Raw Material Function RM Spec Percent Lbs/Batch Filler M-971 DuPont JCM Nalco 71D-5 * Water Filler Adhesive Defoamer Solvent 94.60 2050.0 185 5. 31. 115.0 (12.9 ga 125 .09 2.0 - 971.0 (116 gal 100.000 3138.0 ** * Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 50+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water - :. 2) JCM 3) Nalco 4) Filler M-971 5) Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (550 + 20) For Machine tools add 4 gallons H2O (450 + 20) pH 8.0 - 9.0 WORKING PROPERTIES Specifications -/ Denotes change - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. BGR:ps Continued on Page 2 . . . . SGP 0017574 October 2, 1981 Supersedes Formula M-972 Dated 6/30/81 MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-972 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing FORMULA Raw Material / Proxel CRL Filler M-971 DuPont JCM Nalco 71D-5 * Water Function Preservative Filler Adhesive Defoamer Solvent RM Spec 185 125 Percent .11 94.50 5.30. .09 Lbs/Batch 2.36 2050.0 115.0 (12.9ga 2.0 972.64(116 gal) 100.000 3138.0 ** * * Approximately 52 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 50+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/pail. ** SPECIAL MIXING INSTRUCTIONS: - Blend ingredients in following order: -/ 1) Water/Proxel CRL 2) JCM 3) Nalco 4) Filler M-971 WORKING CONSISTENCY Specifications for Paste Brabender: (550 + 20) 5, Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20. Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. For Machine tools add 4 gallons (450 + 20) PH WORKING PROPERTIES Specifications -/ Denotes change BGR:ps 8.0 - 9.0 - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. Continued on Page 2 SGP 0017575 , SGP 0017566 M ARIETTA FORMULA #912 ASBESTOS CONTAINING PRODUCTS