Document RpBGzdj9rmyj9LGq37J8qmjK7

SGT SGS INSTITUT FRESENIUS GmbH Postfach 1261 65220 Taunusstein INSTITUT FRESENIUS FluorTex GmbH Herr Detlef Reichl Auf der Groeb 2c DE-83064 Raubling Taunusstein, 07/04/2017 Zamien Sarkardeh / jn Project Manager Hardlines Tel.: , Fax: gsgs.com Consumer and Retail Non Food Pri.ifbericht Nr. / Test-report no. 3310995-01 Priifbericht-Version / Test-report version < 2 > Dieser Bericht ersetzt Prufbericht 3310995-01 Version <1> vom 30/03/2017 / This test report replaces test report 3310995-01 version <1> of 30/03/2017 Original Probe Nr. / Original Sample ID 170239984 Probenbeschreibung / Sample Description multiFlon ePTFE Dichtungsplatte / gasket sheet 3 mm Probeneingang / Sample Receipt Date 06/03/2017 Allgemeine Angaben / General Information 0' SGS-Kundennr. / SGS-Client's ID 0' SGS-Kundenauftrag / SGS-Customer-Order 10156588 : 4085499 Auftragserteilung / Ordering date : 03/03/2017 Prufzeitraum / Testing period : 09/03/2017 - 20/03/2017 Bestell-Nr. / Order No. Artikel-Nr. / Item No. 151151530 Prufumfang / Testing scope Prilfung nach Prufvorschlag Test according to test suggestion Beurteilung / Assessment Priifanforderungen / Overall assessment bestanden / pass In den Untersuchungspunkten entspricht die Probe den MaBgaben des LFGB sowie der Verordnung (EG) Nr. 1935/2004. The sample meets the requirements of LFGB and Regulation (EC) No. 1935/2004 in the tested items. SGS INSTITUT FRESENIUS GmbH (Project Manager) I. A. `as_ emer (Project Manager) R:\F\FluorTex GmbH 10156588\2017\4085499 PTFE Dichtungsplatte\PB 331099501 rev01 4085499 LFGB.doc Seite /page 1 / 10 SGS INSTITUT FRESENIUS GmbH I Im Maisel 14 D-65232 Taunusstein t +49 6128 744 - 0 f +49 6128 744 -130 www.institut-fresenius.sgsgroup.de Member of the SGS Group (Societe Generale de Surveillance) Die Priifergebnisse beziehen sich auf die untersuchten Proben. Die Veroffentlichung und Vervielfaltigung unserer Prilfberichte und Gutachten zu Werbezwecken sowie deren auszugsweise Verwendung in sonstigen Fallen bediirfen unserer schriftlichen Genehmigung. Alle Dienstleistungen warden auf Grundlage der anwendbaren Allgemeinen Geschaftsbedingungen der SGS, die auf Anfrage zur VerfOgung gestellt werden, erbracht. Geschaftsfuhrer: Stefan Steinhardt Aufsichtsratvorsitzender: Dirk Hellemans, Sitz der Gesellschaft Taunusstein, HRB 21543 Amtsgericht Wiesbaden FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 2/10 Zusammenfassung der Analysenergebnisse / Summary of results Prfung / Test Globalmigration / overall migration Spezifische Migration von Formaldehyd (Ref.-Nr.: 17260/54880, CASNr.: 50-00-0) / specific migration of formaldehyde (Ref. No: 17260/54880, CAS No: 50-00-0) Tetrafluorethylen (Ref.-Nr.: 25120; CAS-Nr.: 116-14-3) / tetrafluoroethylene (Ref. No: 25120, CAS No: 116-14-3) Spezifische Migration primrer aromatischer Amine / Specific migration of primary aromatic amines Blei / Lead Cadmium / Cadmium PAK / PAH Ergebnis / Result bestanden / pass bestanden / pass bestanden / pass bestanden / pass bestanden / pass bestanden / pass bestanden / pass Bemerkung: Note: Die Beurteilung erfolgt auf Basis der Prfergebnisse der entnommenen Teilproben des vorliegenden Prfmusters. Die Beurteilung der Ergebnisse erfolgt anhand der genannten Anforderungen, ohne Bercksichtigung etwaiger Messunsicherheiten. Fr die Bildung von Summen werden nur Messwerte oberhalb der jeweiligen Bestimmungsgrenze bercksichtigt. Prfungen von Mischproben von reprsentativen Teilproben wurden auf Kundenwunsch durchgefhrt. Das Ergebnis bezieht sich auf die Mischprobe und nicht auf die Teilprobe. Die Prfung von Mischproben erfolgt auf Kundenwunsch und kann eine Abweichung von der genannten Prfnorm darstellen. Fr Mischproben mit zwei Bestandteilen, die die Hlfte der genannten Anforderungen berschreiten, oder Mischproben mit drei Bestandteilen, die ein Drittel der genannten Anforderung berschreiten, besteht die Mglichkeit, dass ein oder mehrere Bestandteile die Anforderungen nicht bestehen. In diesen Fllen empfehlen wir eine separate Prfung der Bestandteile. Conclusions on pass/fail are based on the test result from the actual sampling of the received sample(s). Conclusions are based on the relevant requirements; measurement uncertainties are not taken into account. Only results above the relevant detection limit are taken into account for the calculation of sums. Test was conducted on composite of random parts of the item as per client's request and the test result is the overall result. The composite sampling method is based on the client's special request and could be a modification from the testing standard. For 2-composite mix with results exceeding one half of the relevant requirements or 3-composite mix with results exceeding one third of the relevant requirements, the composite sample may have the possibility of one or more components that can lead to a failure result, it is recommended to test on individual basis. SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 3/10 Photodokumentation / Photo documentation Teilproben-Liste / List of sample parts Teilpr. Nr / Comp. no 1 Teilproben ID / Component-ID - Proben-Beschreibung / Sample-Description PTFE Dichtungsplatte / gasket sheet Originalproben-ID / Original Sample ID 170239984 SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 4/10 Untersuchungsergebnisse / Analytical results Globalmigration / overall migration Prfmethode / Test Method DIN EN 1186:2002 Simulanz / simulant Dauer / duration Temperatur / temperature Ansatz / approach Teilprobe(n) / Subsample(s) Globalmigration / overall migration Beurteilung / Conclusion Prfmethode / Test Method DIN EN 1186:2002 Simulanz / simulant Dauer / duration Temperatur / temperature Ansatz / approach Teilprobe(n) / Subsample(s) 3% Essigsure / 3% acetic acid 4 Stunden / 4 hours 100 +/- 2C 6 dm/L Einheit / Unit Ergebnis / Result 1 mg/dm 1. Kontakt / 1st contact < 1 Bestanden / Pass Olivenl / olive oil 2 Stunden / 2 hours 175 +/- 2C 6 dm/L Einheit / Unit Ergebnis / Result 1 Globalmigration / overall migration Beurteilung / Conclusion Bemerkung / Note: mg/dm 1. Kontakt / 1st contact < 1 Bestanden / Pass Anforderung: max. 10 mg/dm (Verordnung (EU) Nr. 10/2011) Analysentoleranz der Methode ( 64 LFGB B 80.30-3 (EG)): 2 mg/dm fr wssrige Prflebensmittel 3 mg/dm fr Olivenl und Fettersatz Requirement: max. 10 mg/dm (Regulation (EU) No 10/2011) analytical tolerance of the method ( 64 LFGB B 80.30-3 (EG)): 2 mg/dm for aqueous simulants 3 mg/dm for olive oil and fat substitutes SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 5/10 Spezifische Migration von Formaldehyd (Ref.-Nr.: 17260/54880, CAS-Nr.: 50-00-0) / specific migration of formaldehyde (Ref. No: 17260/54880, CAS No: 50-00-0) Prfmethode / Test Method DIN CEN/TS 13130-23:2005-05 Simulanz / simulant Dauer / duration Temperatur / temperature Ansatz / approach 10% Ethanol / 10% ethanol 4 Stunden / 4 hours 100 +/- 2C 6 dm/L Teilprobe(n) / Subsample(s) Einheit / Unit Ergebnis / Result 2 Formaldehyd / formaldehyde (50-00-0) Beurteilung / Conclusion Bemerkung / Note: mg/kg 1. Kontakt / 1st contact < 1.0 Bestanden / Pass Anforderung: max. 15 mg/kg Prfsimulanz (Verordnung (EU) Nr. 10/2011) Requirement: max. 15 mg/kg food simulant (Regulation (EU) No 10/2011) Tetrafluorethylen (Ref.-Nr.: 25120; CAS-Nr.: 116-14-3) / Tetrafluoroethylene (Ref. No: 25120, CAS No: 116-14-3) Prfmethode / Test Method Messung: Headspace-GC/MS / measurement: Headspace-GC/MS Die Ermittlung der spezifischen Migration von Tetrafluorethylen erfolgte rechnerisch nach dem worst case Prinzip. / The determination of specific migration of tetrafluoroethylene was calculated according to the worst case principle. Teilprobe(n) / Subsample(s) Tetrafluorethylen / tetrafluoroethylene (116-14-3) Tetrafluorethylen / tetrafluoroethylene (116-14-3) Beurteilung / Conclusion Einheit / Unit mg/dm mg/kg Prfsimulanz[1] / mg/kg food simulant[1] Ergebnis / Result 1 1. Kontakt / 1st contact < 0.01 < 0.05 bestanden / pass Bemerkung / Note: [1]unter der Annahme, dass 6 dm mit 1 kg Lebensmittel in Berhrung kommen [1]assuming that 6 dm come into contact with 1 kg of food. Anforderung: Requirement: max. 0,05 mg/kg Prfsimulanz (Verordnung (EU) Nr. 10/2011) max. 0.05 mg/kg food simulant (Regulation (EU) No 10/2011) SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 6/10 Spezifische Migration primrer aromatischer Amine / Specific migration of primary aromatic amines Prfmethode / Test method Extraktion: EN 645, Messung: LC-MS/MS / extraction: EN 645, measurement: LC-MS/MS Simulanz / simulant Dauer / duration Temperatur / temperature Ansatz / approach 3% Essigsure / 3% acetic acid 4 Stunden / hours 100 +/- 2 C 6 dm/L Teilprobe(n) / Subsample(s) Einheit / Unit Ergebnis / Result 1 1. Kontakt / 1st contact Anilin (62-53-3) / g/l < 2 Aniline (62-53-3) o-Toludin (95-53-4)a / g/l < 2 o-toluidine (95-53-4)a m-Toluidin (108-44-1) / g/l < 2 m-toluidine (108-44-1) p-Toluidin (106-49-0) / g/l < 2 p-toluidine (106-49-0) 2,4-Toluylendiamin (95-80-7)a / g/l < 2 2,4-toluylendiamine (95-80-7)a 2,6-Toluylendiamin (823-40-5)/ g/l < 2 2,6-toluylendiamine (823-40-5) o-Anisidin (90-04-0)a / g/l < 2 o-anisidine (90-04-0)a m-Anisidin (536-90-3)/ g/l < 2 m-anisidine (536-90-3) Benzidin (92-87-5)a/ g/l < 2 Benzidine (92-87-5)a 4,4-Diaminodiphenylmethan (101- g/l < 2 77-9)a / 4,4'- diaminodiphenylmethane (101-77- 9)a 4,4Oxydianilin (101-80-4)a / g/l < 2 4,4'-oxydianiline (101-80-4)a 4-Chloranilin (106-47-8)a / g/l < 2 4-chloraniline (106-47-8)a 3-Chloranilin (108-42-9) / g/l < 2 3-chloroaniline (108-42-9) p-Kresidin (120-71-8)a / g/l < 2 p-kresidine (120-71-8)a 4-Chlor-o-toluidin (95-69-2)a / g/l < 2 4-chloro-o-toluidine (95-69-2)a 2-Naphtylamin (91-59-8)a / g/l < 2 2-naphtylamine (91-59-8)a 4-Aminodiphenyl (92-67-1)a / g/l < 2 4-aminodiphenyle (92-67-1)a 4-Aminoazobenzol (60-09-3)a / g/l < 2 4-aminoazobenzene (60-09-3)a 3,3-Dimethylbenzidin (119-93-7)a/ g/l < 2 3,3-dimethylbenzidine (119-93-7)a 4,4-Thiodianilin (139-65-1)a / g/l < 5 4,4' - thiodianiline (139-65-1)a SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 7/10 3,3-Dimethyl-4,4- g/l < 2 diaminodiphenylmethan (838-88-0)a / 3,3'-dimethyl-4,4'- diaminodiphenylmethane (838-88- 0)a 3,3-Dimethoxybenzidin (119-90-4)s g/l < 2 / 3,3-dimethoxybenzidine (119-90-4)a 3,3-Dichlorbenzidin (91-94-1)a / g/l < 2 3,3-dichlorobenzidine (91-94-1)a 4,4-Methyl-bis(2-chloranilin) (101- g/l < 2 14-4)a / 4,4'-methyl-bis(2- chloroaniline) (101-14-4)a (1,3)- / 1,4-Phenylendiamin (108-45- g/l < 2 2 / 106-50-3) / (1,3)- / 1,4- phenylenediamine (108-45-2 / 106- 50-3) 1,2-Phenylendiamin (95-54-5) / g/l < 2 1,2-phenylenediamine (95-54-5) 2,4,5-Trimethylanilin (137-17-7)a / g/l < 2 2,4,5-trimethylaniline (137-17-7)a o-Aminoazotoluol (97-56-3)a / g/l < 2 o-aminoazotoluene (97-56-3)a 2,4-Diaminoanisol (615-05-4)a / g/l < 2 2,4-diaminoanisol (615-05-4)a 2-Amino-4-nitrotoluol (99-55-8) / g/l < 2 2-amino-4-nitrotoluene (99-55-8) 2,6-Dimethylanilin (87-62-7) / g/l < 2 2,6-dimethylaniline (87-62-7) 2,4-Dimethylanilin (95-68-1) / g/l < 2 2,4-dimethylaniline (95-68-1) 1,5-Diaminonaphthalin (2243-62-1) / g/l < 2 1,5-diaminonapthalene (2243-62-1) 4,4'-Methylen-bis(3-chlor-2,6- g/l < 2 diethylanilin) (106246-33-7) / 4,4`-methylen-bis(3-chloro-2,6- diethylanilne (106246-33-7) 2,4-Diamino-6-phenyl-1,3,5-triazin g/l < 2 (91-76-9) / 2,4-diamino-6-phenyl- 1,3,5-triazine (91-76-9) 4-Ethoxyanilin (156-43-4) / g/l < 2 4-ethoxyaniline (156-43-4) 3-Amino-4-methoxybenzanilid (120- g/l < 2 35-4) / 3-amino-4- methoxybenzanilide (120-35-4) 2-Methoxy-4-nitroanilin (97-52-9) / g/l < 5 2-methoxy-4-nitroaniline (97-52-9) 5-Amino-6-methylbenzimidazolon g/l < 5 (67014-36-2) / 5-amino-6- methylbenzimidazolone (67014-36- 2) 4-Aminobenzamid (2835-68-9) / g/l < 5 4-aminobenzamide (2835-68-9) 3-Amino-4-methylbenzamid (19406- g/l < 5 86-1) / 3-amino-4-methylbenzamid (19406-86-1) 2-Chloranilin (95-51-2) / g/l < 10 2-chloroaniline (95-51-2) 2-Ethoxyanilin (94-70-2) / g/l < 5 2-ethoxyaniline (94-70-2) SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 8/10 5-Chlor-2-methylanilin (95-79-4) / g/l 5-chloro-2-methylaniline (95-79-4) 1,3-Diiminoisoindolen (3468-11-9) / g/l 1,3-diiminoisoindolene (3468-11-9) 5-Chlor-2-methoxyanilin (95-03-4) / g/l 5-chloro-2-methoxyanilin (95-03-4) 2,5-Dichloranilin (95-82-9) / g/l 2,5-dichloroaniline (95-82-9) 2-Chlor-4-nitroanilin (121-87-9) / g/l 2-chloro-4-nitroaniline (121-87-9) 4-Chlor-2,5-dimethoxyanilin (6358- g/l 64-1) / 4-chloro-2,5- dimethoxyaniline (6358-64-1) 2,4,5-Trichloranilin (636-30-6) / g/l 2,4,5-trichloroaniline (636-30-6) 4-Chlor-3-methoxyanilin (13726-14- g/l 2) / 4-chloro-3-methoxyaniline (13726- 14-2) 2,4-Dinitroanilin (97-02-9) / g/l 2,4-dinitroaniline (97-02-9) 4-aminotoluol-3-sulfonsure (88-44- g/l 8) / 4-aminotoluene-3-sulfonic acid (88-44-8) 2-Amino-1-naphthalinsulfonsure g/l (81-16-3) / 2-amino-1- naphthalinesulfonic acid (81-16-3) Dimethylaminoterephthalat (5372- g/l 81-6) / Dimethyl aminoterephthalate (5372-81-6) p-Anisidin (104-94-9) / p-Anisidine g/l (104-94-9) 3,4-Dichloranilin (95-76-1) / 3,4- g/l Dichloraniline (95-76-1) 1-Naphthylamin (134-32-7) / 1- g/l Naphthylamine (134-32-7) 2-Aminobiphenyl (90-41-5) / 2- g/l Biphenylylamine (90-41-5) Butyl-Anthranilat (7756-96-9) / Butyl g/l anthranilate (7756-96-9) 2,4-Diaminodiphenylmethan (1208- g/l 52-2) / 2,4-Diaminodiphenylmethane (1208-52-2) 2,2-Diaminodiphenylmethan (6582- g/l 52-1) / 2,2'- Diaminodiphenylmethane (6582-52- 1) 2-Amino-5-methylbenzoesure g/l (2941-78-8) / 2-Amino-5- methylbenzoic acid (2941-78-8) Summe / Sum g/l Beurteilung / conclusion < 5 < 10 < 5 < 10 < 5 < 5 < 10 < 10 < 5 < 5 < 5 < 2 < 2 < 2 < 2 < 2 < 2 < 2 < 2 < 2 bestanden / pass Bei der Summation werden nur Ergebnisse oberhalb der Berichtsgrenze eingerechnet. / For the summation only results above the reporting limit are taken into account. Anforderung: nicht nachweisbar (Summe: < 10 g/l (in Anlehnung an Verordnung (EU) Nr. 10/2011) (in Anlehnung an BfR Empfehlung XXXVI) < 2 g/l fr die mit a markierten Substanzen (in Anlehnung an BfR Empfehlung XXXVI) Requirement: not detectable (Sum <10 g/l based on Regulation (EU) No. 10/2011) (based on BfR Recommendation XXXVI) < 2 g/l for the marked substances (a) (based on BfR Recommendation XXXVI) SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 9/10 Blei / Lead Prfmethode / Test Method Hausmethode , Analyse mit ICP-OES nach Aufschluss / Inhouse-method , analysis was conducted with ICP-OES after digestion Teilprobe(n) / Subsample(s) Einheit / Unit Ergebnis / Result 1 Blei (Pb) / Lead (Pb) Beurteilung / Conclusion Bemerkung / Note: mg/kg < 2.0 Bestanden / Pass Anforderung: nicht gelistet in Verordnung (EU) Nr. 10/2011 (<2 mg/kg) Requirement: not listed in Regulation (EU) No 10/2011 (<2 mg/kg) Cadmium / Cadmium Prfmethode / Test Method In Anlehnung an EN 1122:2002 , Analyse mit ICP-OES nach Aufschluss / Based on EN 1122:2002 , analysis was conducted with ICP-OES after digestion Teilprobe(n) / Subsample(s) Einheit / Unit Ergebnis / Result 1 Cadmium (Cd) / Cadmium (Cd) Beurteilung / Conclusion Bemerkung / Note: mg/kg < 0.5 Bestanden / Pass Anforderung: nicht gelistet in Verordnung (EU) Nr. 10/2011 (<0,5 mg/kg) Requirement: not listed in Regulation (EU) No 10/2011 (<0.5 mg/kg) SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas. FluorTex GmbH Auf der Groeb 2c DE-83064 Raubling Prfbericht Nr. / Test report no. 3310995-01 Prfbericht-Version / Test-report version < 2 > SGS Auftragsnr./ SGS Order No.: 4085499 Datum / Date: 07/04/2017 Seite / Page 10/10 PAK / PAH Prfmethode / Test Method AfPS GS 2014:01 PAK , Bestimmung mittels GC-MSD / AfPS GS 2014:01 PAK , with use of GC-MSD Teilprobe(n) / Subsample(s) Einheit / Unit Ergebnis / Result 1 Benzo[a]anthracen / Benzo[a]anthracene (5655-3) [1] Chrysen / Chrysene (218-01-9) [1] Benzo[e]pyren / Benzo[e]pyrene (192-97-2) [1] Benzo[b]fluoranthen / Benzo[b]fluoranthene (205-99-2) [1] Benzo[k]fluoranthen / Benzo[k]fluoranthene (207-08-9) [1] Benzo[j]fluoranthen / Benzo[j]fluoranthene (20582-3) [1] Benzo[a]pyren / Benzo[a]pyrene (50-32-8) [1] Dibenzo[ah]anthracen / Dibenzo[ah]anthracene (53-70-3) [1] Beurteilung EU-PAK / Conclusion EU-PAHs Acenaphthylen / Acenaphthylene (208-96-8) Acenaphthen / Acenaphthene (83-32-9) Fluoren / Fluorene (86-73-7) Phenanthren / Phenanthrene (85-01-8) Anthracen / Anthracene (120-12-7) Fluoranthen / Fluoranthene (206-44-0) Pyren / Pyrene (129-00-0) Naphthalin / Naphthalene (91-20-3) Benzo[ghi]perylen / Benzo[ghi]perylene (191-242) Indeno[1,2,3-cd]pyren / Indeno[1,2,3-cd]pyrene (193-39-5) Summe 18 PAK / Total 18 PAH [2] Beurteilung (pro Einzelverbindung) / Conclusion (per single substance) Bemerkung / Note: mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 Bestanden / < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 < 0.2 Pass < 0.2 Bestanden / Pass Anforderung: Requirement: nicht gelistet in Verordnung (EU) Nr. 10/2011 (<0,2 mg/kg) not listed in Regulation (EU) No 10/2011 (<0.2 mg/kg) [1]PAK gem der EU VO Nr. 1272/2013 zur Erweiterung des Anhang XVII EU VO Nr. 1907/2006 gltig ab 27. Dezember 2015 [1]PAH according to the Commission Regulation (EU) No 1272/2013 amending Annex XVII to Regulation (EC) No 1907/2006 effective from December 27, 2015 [2]Bei der Summation werden nur Ergebnisse oberhalb der Berichtsgrenze eingerechnet [2]For the summation only results above the reporting limit are taken into account. *** Ende des Berichts *** / *** End of test report *** SGS Institut Fresenius GmbH, Im Maisel 14, D-65232 Taunusstein The analytical findings are only valid for the sample as analyzed. Written acknowledgement for publication and duplication of our analytical reports for promotional purpose, as well as fractional use for other purposes mandatory. Electronically submitted results are for your information only. For legally binding results refer to the originally signed analytical report. Numbers following ,,<" represent limits of quantification. Determination of parameters marked with * was performed with a cooperation partner. Please note that the analysis was fully or partially conducted at the laboratory facilities of Institut Fresenius which are accredited according to DIN EN ISO/IEC 17025. These laboratory facilities are not explicitly accounted as GMP-areas.