Document R2jdZ197q5NMeNp8DL5MJYOGz

II) Initiate on-site construction or Installation'of the emission control equipment by Ally 1. 1982. III) Complete on-site construction or Installation of theemtsslon control equipment by-October 1. 1982. 2) Bulk Gasoline Plants. Bulk Gasoline ; -Terminals. Petroleum Liquid Storage Tanks '"`The owner.of an emission source subject to the requirements of Buie 2fiS(o). except (o)(3). shall take the following actions: A) Submit to the Agency a compliance program that meets the-requirements of Rule 104(b)(1) by the date specified In Rule ' 104(g); B) Award.'contracts for emission control systems or'Issue orders for the purchase of component parts by Ally 1. 1980. C)' Initiate oh-slte construction or ' Installation of the emission control system by'January 1. 1981. !** D) Complete on-site construction' or Installation of the emission control system and achieve final compliance by July.1. 1981. f 3) Gasoline Dispensing Facilities Owners of gasoline dispensing facilities subject to' the requirements of Rule 20S(p) shall- take the.following actions: v A) Submit to the'Agency a compliance program that meets "the. requirements of , Rule 104(b)(1) by the date specified In Rule 104(g): B) Achieve final'compliance for 33 percent of'all gasoline dispensing facilities owned b> the owner by July 1. 1980. C) Achieve final compliance for 66 percent of all gasoline-dispensing facilities owned by the owner by July 1.-1981. 0) Achieve final compliance for 100 percent of all gasoline'dispensing facilities owned by the owner by July 1, 1982. 4) Petroleum Refinery Leaks The-owner or operator of a petroleum, ref Inery shall adhere to the Increments of progress contained In the following scheduler. A) Submit to the' Agency a monitoring program plan consistent with Rule 20S(1)(S) prior to June 1; 1983. 8) Submit the first monitoring report pursuant to Rule 205(1)(6)(A}(1) to the Agency prior to July 1. 1983. 5) Coating Lines Subject to Rule 2QS(n)(i)(X)(11) The. owner-or operator of coating lines subject to Ru1e.20S(n)(l)(K)(1i) may In lieu of compliance with Rule 20S(J)(1) demonstrate compliance through the use of a low solvent coating technology by taking the following actions: A) Submit to the Agency a compliance plan. Including a project.completion schedule. that oeiets the requirements of Rule 104(b)(1) wltliln 210 days after the effective date of this rule: and B) Meet the following Increments of progress: I) 'Submit to the Agency by July 1. 1984 and.,every ,six.months , thereafter a report-, describing In detail the progress aade In the development, application testing, product' qua! Ityvcustomer acceptance and F0A or government agency..approval of the'.low solvent'coating technology: II). . Initiate process modifications to allow the use of low solveriC coatings as soon as coatings meeting Board requirements become cownerctaTTy ava liable for production use; and ill) Achieve FTnaT CompTfance as expeditiously as possible but no later.than December 31. 1984. 6) Rotogravure and Flexography tow Solvent Ink Alternative .Compliance Plan the owner or operator of an emission source subject to Rule 20S(S) may In lieu!of compliance with Rules 104(h)(1)(A):and 20S(J) demonstrate cdihpTlance through'ther use of a low solvent Ink.program by taking the foil owlngact Ions: A) Submit to the Agency a compliance plan. Including a compliance scheduled'^by December31'. I983*h1ch demonstrates:-- 1) Substantial emission reactions early In the compliance schedule; 11) ... Greater, reductions In fissions than would have occurred without a low solvent ink program; and tttt final compliance as- expeditiously as possible but no later, than December 31. 1987; and - B)~ Certify to the Agency. Uat 1) A low solvent Ink compliance strategy Is not technically available which would not enable the enrtsstwr source-tar-achlevo" compliance by the date specified In Rule 20S(J): and - 137 -